• RELEVANCY SCORE 3.96

    DB:3.96:Need New Firmware Of Netgear Wpn824 3x





    I need help for this things!

    I found interesing working firmware: new build for WPN824 v2 from

  • RELEVANCY SCORE 3.51

    DB:3.51:Help With Wpn824 V2--No Setup Cds dc





    I just bought a WPN824 v2 from Tiger Direct that didn't come with an installation CD. When I tried to download the firmware from

    DB:3.51:Help With Wpn824 V2--No Setup Cds dc

    Never mind. Thanks to a coworker, it's up and running.

  • RELEVANCY SCORE 3.49

    DB:3.49:Can The Wpn824 Connect A Printer? z3





    I have a Brother MFC 9420CN with an ethernet card.

    Can I use my WPN824 v2 to connect this printer wirelessly to my notebook (Windows XP SP2)? The idea is to plug the printer into the router with an ethernet cable.

    Is there an additional product needed?

    I appreciate any help, Barry

  • RELEVANCY SCORE 3.38

    DB:3.38:Network Adapter Problem jm


    Network Adapter Problem

    --------------------------------------------------------------------------------

    I have trouble when i was trying to install the NETGEAR CD. I need to be complete about 20 min but some how it stopped.CAn anyone help me out?

    I have a NETGEAR RangeMAx Wireless Router WPN824 v2.

    Network Adapter Problem

    The network adapter in this computer is not responding.

    You must use the Installation Assistant on a computer with a working Ethernet adapter

    Click Quit to exit the Installation Assistant.

    DB:3.38:Network Adapter Problem jm

    I have responded to your PM. try to post your result here so that other can see your issues as well.

  • RELEVANCY SCORE 3.36

    DB:3.36:Wpn824 V2 Voip (Sip) j1


    I am unable to receive any VOIP calls using the SIP protocol with this router. Even with port forwarding, disabling NAT and SPI Firewall and DMZ.... For some reason this router does not seem to recognize any inbound SIP/VOIP calls. Whenever I call my VOIP number, the router simply reboots and the call fails to connect.

    Anything I can do to work around this or do I need another Router. If so, can anybody recommend one that will support SIP/VOIP?

    Mark

    DB:3.36:Wpn824 V2 Voip (Sip) j1

    Hey Met68

    I was able to get my SIP phone working by disabling the SPI firewall feature. To do so click the 'WAN Setup' link under the Advanced features section in the GUI.

    While this is not an optimal fix, it will get you working.

    //Mer

  • RELEVANCY SCORE 3.23

    DB:3.23:Wpn311 To Wpn824 V2 cf


    i can connect to the inernet no problem but to play Battlefield 2142

    with punkbuster enable it wont let me connect at all

    how can i fix this

    thank you

  • RELEVANCY SCORE 3.20

    DB:3.20:Rangemax Wpn 824 V2 fm


    Hello, I am a newbie for routers and I would appreciate your help. I have the NETGEAR RangeMax Wireless router WPN824 v2. I reset my router because it was not working all of a sudden so now I want to get the internet started back up on my router but I don't know how. Last time I did it through the internet and configured the settings but I am wondering how to get the that netgear website to configure and start using the router.

    Thanks for your help,

    Danny

  • RELEVANCY SCORE 3.20

    DB:3.20:Netgear N600 Main And Wpn824 V2 As A Repeater 9d


    As the title states above I would like to turn my older router into a repeater to use for lan connections for my tv, playstation, etc. Can someone please walk me through how to make my Netgear WPN824 v2 a repeater .

    My setup:

    Motorolla Surfboard sb6120 cable modem

    Netgear N600 main router

    Netgear WPN824 v2 repeater hopefully.

    Thanks in advance.....

    DB:3.20:Netgear N600 Main And Wpn824 V2 As A Repeater 9d

    Not suggested been you will be ONLY limited to WEP/54 or no security

    This answered thousand times on repeating issued

    Suggest to get wn2500rp to keep security at highest

  • RELEVANCY SCORE 3.19

    DB:3.19:O2 Life With Winmob 5 Connection To A Netgear Wireless Router ad


    hi....

    Just purchased an O2 Life with WINMOB5and cannot connect to an already successfully transmitting Netgear WPN824 v2 wireless Router.

    Have tried varies ways but cannot handshake..

    Would appreciate some help or advice...

    cheers Ian

    DB:3.19:O2 Life With Winmob 5 Connection To A Netgear Wireless Router ad

    NETGEAR hasn't got any explanation. They told me to ask Fujitsu-Siemens for firmware upgrade. I found out that on their forum lots of people have got similar problem and looking for solution.

  • RELEVANCY SCORE 3.13

    DB:3.13:Wpn824 V2 Firmware Download Problems sz


    I have tried to download the latest firmware from the Netgear site, but it just won't work. I tried all the suggestions they list on the help page.

    Anyone have a different link or a way to email the file, preferably as a ZIP file?

    DB:3.13:Wpn824 V2 Firmware Download Problems sz

    what extension you like then?

    extension do not matter to download at all

    download works just fine.. test it again

  • RELEVANCY SCORE 3.10

    DB:3.10:Wpn824v2 Windows 7 - No Internet Connection p8


    Situation:

    Netgear Rangemax wpn824 v2.

    Dell with Windows 7 - No internet connection from Rangemax Wireless

    Dell with Windows 7 - Yes internet connection from Rangemax Wired

    Dell with Windows Vista - Yes internet connection from Rangemax Wireless

    Dell with Windows Vista - Yes internet connection from Rangemax Wired

    Help!!! with rangemax wpn824 v2 wireless connection to Dell with Windows 7.

    Have already done the following:

    Updated Dell with Windows 7

    Updates Firmware on Netgear rangemax

    Help!!!

  • RELEVANCY SCORE 3.10

    DB:3.10:Extending The Range And Access f7


    I have a farmhouse and a barn with living quarters above it. The house and the barn are about 250 ft apart. I have a RangeMax Wireless Router (WPN824 v2) on the first floor of our house and it works great in the house. I want to extend the service to the living quarters in the barn on the second floor. So far the signal only gets to the entrance of the barn on the first floor, which I have tested using my laptop and walking around alot. How can I extend the service farther into the barn and upstairs? The barn is about about 8000 sqft and most of the first floor is refrigerated walk-in compartments (large metal doors and boxes). I know it is possble, I just need the right equipment. Please help!

    DB:3.10:Extending The Range And Access f7

    With the WGT624 you could either turn wireless off, or use it as a separate wireless network with a different SSID and a different channel number, remember channels 1, 6, and 11 do not overlap.

  • RELEVANCY SCORE 3.07

    DB:3.07:Wpn824 V2 And Iptv 1z


    Hello all

    I've got a tech request on this pending but I thought I'd give the forum a shot as well.

    I have signed up for IPTV service and need to connect my set-top decoder through my WPN824 router. However, I can not find in the router manager software a way to assign additional vci/vpi to accomodate the IPTV data.

    What I need is something like this:

    Wan Settings Pure Bridge

    VPI 1

    VCI 91

    Encapsulation Method LLC Bridged

    Filter Type All

    PVID for untagged frames 1

    ATM Class UBR

    Where VCI is set for both 91 and 92 (this in addition to the VPI/VCI used for Internet traffic). I also need to be able to turn on IGMP.

    Anyone know if these settings are configurable. If not, I will have to replace the router.

    Thanks for your help.

    DB:3.07:Wpn824 V2 And Iptv 1z

    No,you have to set up link layer stuff in modem.

  • RELEVANCY SCORE 3.07

    DB:3.07:Help Wpn824 4 Wi-Fi 3d


    help tutorial wpn824 and 2 pc wlan configuration

  • RELEVANCY SCORE 3.07

    DB:3.07:Wpn824 Wireless Connection To Netopia? 9z


    Hi

    I have a Netopia router with access to my Broadband connection and want to use a Netgear WPN824 as a wireless access point to my PC via a LAN connection.

    Is this possible?

    Can the WPN824 connect wirelessly to the Netopia router?

    What settings would I need to make?

  • RELEVANCY SCORE 3.07

    DB:3.07:Purchased A Second Wpn824 To Use As A Extender/Repeater da


    I have purchased a second WPN824 to extend the range of my network - I need some advice on settings.

    For the repeater 824, my plan was to use the same wireless channel, mode and region and WEP password (as my master) and then connect the second 824 hard wired through one of the 4 router ports.

    Both are v2 models however, I note that one only offers channel 6 for Australia.

    Upon trying to setup the repeater 824 I note it requires the DNS setting - what should I do here? Any other advice?

    Thanks in advance.

    DB:3.07:Purchased A Second Wpn824 To Use As A Extender/Repeater da

    wireless between the two unit's ? NO

    use one as an access point connect two together with ethernet cable? YES

  • RELEVANCY SCORE 3.04

    DB:3.04:Wpn824 V2 Problem With Linksys Wpc54g V2 Cardbus Card af


    I recently acquired WPN824 v2 for wireless functions, and replace Linksys BEFSR41 which worked very well. I now wonder if I should return this unit and buy Linksys WRT54G instead.

    I installed the WPN824 and updated the firmware. It seems to work fine in basic router switch function, but the wireless function which I bought it for is essentially non-functional as described below. I really need your help.

    BTW, my Linksys WPC54G card in HP pavillion ze4145 still works in public and friend's network.

    My new wireless network worked once or twice when my notebook PC is in the same room and booted up, with WPA/TKIP and auto 108 Mbps set-up. But it dropped connection after a few minutes or when I move just a few feet away to next room to test the eXtended Range. What a joke it is! What happened to the glowing reviews? Am I suffering a typical interconnect/finger pointing between Linksys and Netgear? So, I have to cough up more $'s and buy Netgear card? If that's the case, I would rather stick with Linksys, which served me very well for many years. Though I still want to support Netgear since Cisco's buy out of LinkSys.

    I would really appreciate your assistances for prompt resolution.

    DB:3.04:Wpn824 V2 Problem With Linksys Wpc54g V2 Cardbus Card af

    I recently acquired WPN824 v2 for wireless functions, and replace Linksys BEFSR41 which worked very well. I now wonder if I should return this unit and buy Linksys WRT54G instead.

    I installed the WPN824 and updated the firmware. It seems to work fine in basic router switch function, but the wireless function which I bought it for is essentially non-functional as described below. I really need your help.

    BTW, my Linksys WPC54G card in HP pavillion ze4145 still works in public and friend's network.

    My new wireless network worked once or twice when my notebook PC is in the same room and booted up, with WPA/TKIP and auto 108 Mbps set-up. But it dropped connection after a few minutes or when I move just a few feet away to next room to test the eXtended Range. What a joke it is! What happened to the glowing reviews? Am I suffering a typical interconnect/finger pointing between Linksys and Netgear? So, I have to cough up more $'s and buy Netgear card? If that's the case, I would rather stick with Linksys, which served me very well for many years. Though I still want to support Netgear since Cisco's buy out of LinkSys.

    I would really appreciate your assistances for prompt resolution.

  • RELEVANCY SCORE 3.03

    DB:3.03:Wpn824 V2 Port Forwarding Ftp 7s


    Hi,

    I have a WPN824 router and cable ISP.

    I would like to set up an FTP server on my main PC or use a second.

    I will be using Fillezilla.I have tried to establish a connection,but no luck as yet.I believe it down to port forwarding issue.

    As anyone set up a FTP server with Filezilla,can anyone explain what the correct procedure for creating a FTP port forwarding is within the router.

    I have seen a view videos on youtube,each are different.

    Any help is appreciated,thanks

  • RELEVANCY SCORE 3.03

    DB:3.03:Help Me!! sj


    Ok, so here's my issue. I am currently using the RangeMax WPN824 v2. If I let it sit long enough without getting on the internet, it becomes idle. When I want to get on the internet, I cant. Why would it not work after sitting for a while without getting on the internet? Please help. Its brand new. I also updated the firmware.

    DB:3.03:Help Me!! sj

    Well, I'm the biggest idiot. I figured out that it was my firewall that was blocking it. It's weird. If I was constantly on the internet, it was ok, but if I let it set a while, it wouldnt let me back on. So I had to add my routers IP to the firewall and now it works fine. Thanks for all the help, I appreciate it.

  • RELEVANCY SCORE 3.03

    DB:3.03:Wpn824 V2 And Airport Express Airtunes?? 83


    I decided to give up my Airport Express for a better signal and bought a WPN824, intending to use the AX for AirTunes only. I now realise it's probably unlikely I can have to wifi base stations operating at the same, right?

    So is there a way I can get the two working in combo, ie. by using the AX as some kind of repeater/extender?

    This is a WPN824 v2.

    Is this a matter of the router being WDS compatible? Hope to god I've bought the right one, otherwise I may have to send it back.

    Any ideas please?

    DB:3.03:Wpn824 V2 And Airport Express Airtunes?? 83

    with WDS supported router on WPN (v2 and up), Airport express will work either as an access point using wired to WPN or wirelessly to WPN with airport express as well.

  • RELEVANCY SCORE 3.03

    DB:3.03:Wpn824 V2 Giving Strange Error Msg fj


    I attempted to install the router using the CD after having used the Reset to Defaults button and following the process exactly, and I received this error screen.

    DB:3.03:Wpn824 V2 Giving Strange Error Msg fj

    hard reset and just open IE browser, should start netgear smart wizzard follow that and finish the setup. after you can login the router and setup your wireless.

    make sure you set up with WIRED ONLY

    you can read manual on how to login the router

  • RELEVANCY SCORE 3.02

    DB:3.02:Wpn824 Problem a1


    Hi Guys

    I dont know if this s the right place to ask question, but i badly need some help. :'(

    I recently bought a

  • RELEVANCY SCORE 3.01

    DB:3.01:Wpn824 V2 Connection Problem pd


    My Netgear WPN824 v2 just started resetting itself every 3-4 seconds. The wireless light flashes then the internet and 1,2,3,4 flash off and on all at the same time. I updated the firmware and tried a hard reset with no luck. My modem works fine when directly connected to the computer. Any ideas on how I can fix this issue. Any help would be much appreciated. Thanks.

    DB:3.01:Wpn824 V2 Connection Problem pd

    Add me to the list..

    Last week I moved from Queens (NY) to South Amboy (NJ).

    Time Warner Cable to Cablevision.

    The Router was working great. Now, I have it all set up and the router works fine as long as I don't have a wire connected to anything (PS3 or the laptop). Once I connect a wired item, the router drops the wireless and and the lights turn/blink orange and green.

    If I only use the wireless, works great. But can't even plug the laptop into the router to upgrade the firmware. If I try that, it goes into some sort of reset/reboot routine.

    Looks like I'll give it a few days and then go buy a new one. Looking at the 3400 as I don't need the Gig 3700~

    Always

    motch

  • RELEVANCY SCORE 2.98

    DB:2.98:Wpn824 Firmware Updating Failure. jj


    Hello!

    I have read everything I could find on this forum on WPN824 Firmware updating.

    I have been around the block with WiFi Router firmware updating, but not with netgear products.

    The warnings I have seen on the internet which say I MUST use Windows Internet Explorer 5.5 to update the firmware scares me. I do not, have never, owned a Windows machine. Do not plan to. Maybe I need to never use NETGEAR products ever again, but I am not certain of that yet.

    I have a WPN824v2 which I bought in 2005 when I planned to use my G4 laptop around the house with OSX. Never got OSX on the laptop, never hooked up the WPN824.

    Now I need to supply 802.11g to my housemate, so out comes the old box. I download the updated firmware, WPN824V2-V2.0.26_1.2.17NA.chk.

    Notably, the 'current' firmware on my WPN824v2 is 1.0.13_1.0.1NA. The fact that the first digit is a 1, and yet the label on my router says v2 and I have the black switch on the back to turn off the crazy flashing antenna LEDs. And the new firmware file starts with a 2. Any issues when updating across this 1.x, 2.x boundary?

    Here is what I did:

    1) Downloaded the file WPN824V2-V2.0.26_1.2.17NA.chk to my Mac running OS9.

    2) Connected my Mac to LAN port #1 of the WPN824v2 (no other connections).

    3) Power up the WPN824v2.

    4) Reboot the Mac.

    5) Log in to the WPN824v2 w/ admin/password account.

    6) Click on Router Upgrade in the GUI.

    7) Click on Browse...

    8) Select the file WPN824V2-V2.0.26_1.2.17NA.chk on the desktop.

    -- The filename WPN824V2-V2.0.26_1.2.17NA.chk now appears in the GUI next to the Browse... button.

    9) Click on Upload.

    Now, after pausing for 2-3 seconds, the GUI flashes 2 images, the first lasts less than a quarter second and gives me no information (a progress bar) when I manage to stop it. The second image has the message Firmware updating failure: check your file.

    Anybody got a checksum of any kind for this file?

    I have done this twice, with each of two files (wpn824v2_2_0_16_1_2_17_na.chk is the other file I used). Same results all 4 times.

    Did a factory reset after the first two, before the second two.

    Anybody got any helpful hints?

    Does anybody even read this forum anymore?

    TIA for any help.

    --Dave

  • RELEVANCY SCORE 2.94

    DB:2.94:Need To Block Websites On Certain Ports j7


    I have the WPN824 V2 wirless router. used on a home network. I need to block websites on certain ports. Is there anyway of doing this with the router? Any and all help is appresiated.

    DB:2.94:Need To Block Websites On Certain Ports j7

    Wrong area

    Moving to rangemax routers

    You might want use opendns.com for easier content filter

    Free too

  • RELEVANCY SCORE 2.92

    DB:2.92:Wireless Access ac


    I have a NetGear WPN824 v2

    I have never had a problem with my lap top connecting wirelessly. All the sudden my 2 wireless devices will not connect. Is there a setting that I need to adjust?

    PLEASE HELP!

    DB:2.92:Wireless Access ac

    Wrong area

    moving to rangemax routers

  • RELEVANCY SCORE 2.92

    DB:2.92:Need Help Please! Wpn824 V2 jm


    Hey guys, ive been reading for hours, found posts similar but not quite matching what I have. Basically I went to change my network name... It timed out, and wouldnt reopen to I could Apply I pushed the reset button on the router and no it turns on and then does its bootup and then just the power button stays on.. No wireless at all... Ive tried connecting directly with a cat5 and tried to go to 192.168.1.1 and routerlogin.net and still no luck, it just goes to no connection page... Any thoughts???

  • RELEVANCY SCORE 2.89

    DB:2.89:Wpn824 V2 Question cs


    Hi, i have a problem and sincerelly i do not know how to solve it.

    I have a WPN824 v2 and i want to block the internet access to some pcs, this pcs have static ip address, but i can not find any option to do it.

    i mean if my dhcp is on the scope 192.168.1.100 to 192.168.1.50 the pcs addresses are 192.168.1.1 to 192.168.1.6.

    thanks

    DB:2.89:Wpn824 V2 Question cs

    please no double post. waste time forum user to answer when two thread is going for no reason.

  • RELEVANCY SCORE 2.88

    DB:2.88:Noob Thicko Question!!!! kz


    Hi folks,

    New member here. I've had my DG834g v2 for awhile now and it hasn't been pumping out what I need for my PC gaming (PC is in seperate room). So I bought myself a RangeMax WPN824.

    Problem is I don't known how to get them to work together. I've tried running the setup wizard that just ends up at the spam ad screen which

    DB:2.88:Noob Thicko Question!!!! kz

    Don't worry I thik I'm just going to return the WPN824 and get something else.

  • RELEVANCY SCORE 2.88

    DB:2.88:Rangemax Wpn824 V2 To A Compaq Desktop Not Working m8


    I have a RangeMax WPN824 v2 wireless router connected to a Motorola sb5101 modem. The modem is brand new. When I connect the modem to the desktop (ethernet cable)... it works fine. WHen I hook up the router to the modem for wireless access.... it works fine. The problem is that the desktop won't recognize my wireless router... it says a network cable is unplugged. But I can connect my router to a laptop just fine. Again, the desktop does not connect to the router... only directly from the modem.. I'm really frustrated... please help

    DB:2.88:Rangemax Wpn824 V2 To A Compaq Desktop Not Working m8

    It seems your router has not setup and you might be getting wireless signal from neighbor's network. Go ahead and download reference manual, read carefully and setup the router first and if you still have any issue revert us back(You can browse you NETGEAR CD for router setup manual)

  • RELEVANCY SCORE 2.87

    DB:2.87:Wpn824 V2 Setup Help cc


    I'm having trouble setting my refurbished netgear router. It didn't come with a setup CD. I tried setting up a wireless network on both my computer and my roommates computer, our laptops can pick up the network's signal but we are not able to access the internet. We tried following the instructions on netgear website, but we are unable to access the netgear setup website (

    DB:2.87:Wpn824 V2 Setup Help cc

    ONLY used WIRED ONLY first... never setup with wireless

  • RELEVANCY SCORE 2.87

    DB:2.87:Wireless Access xs


    I have a NetGear WPN824 v2

    I have never had a problem with my lap top connecting wirelessly. All the sudden my 2 wireless devices will not connect. Is there a setting that I need to adjust?

    PLEASE HELP!

    DB:2.87:Wireless Access xs

    Wrong area

    moving to rangemax routers

  • RELEVANCY SCORE 2.87

    DB:2.87:Wpn824 Reset 9c


    I pushed the reset button on the WPN824 and held it in for at least 10 seconds. My cable company says that the router is communicating with their system. My laptop does not see the wireless router and the wireless light is not on the router. I misplaced my CD that came with the router and I need help.

    Kevin

  • RELEVANCY SCORE 2.84

    DB:2.84:Wpn824 Gaming Problems. k3


    I recently purchased a wpn824 v2 router because my old dlink died. The new rangemax has had its firmware updated and still has big problems with online gaming. It functions properly during other operations, however, i experience very high latencys when i run World of Warcraft. Why is this? the problem definately lies in the router, my internet connections is very fast and my modem works fine. please help me out.

    DB:2.84:Wpn824 Gaming Problems. k3

    Depending on your ISP connection type, you might need to adjust the router MTU or turn off the SPI function (Port Scan and DOS Protection), both settings are in the router WAN Settings page;

  • RELEVANCY SCORE 2.82

    DB:2.82:Wpn311 To Wpn824 V2 p1


    i can connect to the inernet no problem but to play Battlefield 2142

    with punkbuster enable it wont let me connect at all

    how can i fix this

    thank you

  • RELEVANCY SCORE 2.82

    DB:2.82:Meaning Of Wpn824 Model Number Designations (V1,V2,Na) fx


    My newly purchased NetGear router has a model number of WPN824NA. I have seen references to WPN824-v1 and -v2, but never -NA. Does this have any significance, especially as it might relate to firmware updates? Thanks in advance for the help.

    DB:2.82:Meaning Of Wpn824 Model Number Designations (V1,V2,Na) fx

    The NA indicates that the product is for use in North America.

  • RELEVANCY SCORE 2.80

    DB:2.80:How To Turn The Wifi Off On A Netgear Wpn824 Router 9k


    Hi,

    i have a wpn824 v2 Netgear router, and want to know how to turn off the wifi? so that the only way for me to connect to the internet would be to use the LAN ports on the router,

    any help much appreciated, Thanks

    DB:2.80:How To Turn The Wifi Off On A Netgear Wpn824 Router 9k

    encase anyone else needs to know.

    Step I: Disabling the wireless settings

    1 Connect any one of your computers to the Router using an Ethernet cable.

    2 Open Internet Explorer or any other browser and access the site:

  • RELEVANCY SCORE 2.79

    DB:2.79:Wrt300n V2 sx



    PLEASE GIVE INSTRUCTIONS FOR SETUP OF THIS ROUTER. I NEED THE STRONGEST SIGNAL POSSIBLE. PLEASE HELP

    DB:2.79:Wrt300n V2 sx


    If your Internet Service Provider is Cable follow this link to configure the router.

    If your Internet Service Provider is DSL follow this link to configure the router.

  • RELEVANCY SCORE 2.79

    DB:2.79:Rangemax Wpn824 V2 Compatible With Att/Dsl? pa


    I have the Rangemax home networking setup. I am trying to switch providers from cable to DSL. wondered if anyone knows if Netgear is compatible with ATT DSL ? what type of modem do I need to purchase for the DSL line and to hook up the Netgear wireless router? I'm not entirely computer savy...any advice would be appreciated!

    thanks

    DB:2.79:Rangemax Wpn824 V2 Compatible With Att/Dsl? pa

    Wrong area

    Moving rangemax router

    I don't see any issue

    read my router setup see my signature

    You will learn one of two

  • RELEVANCY SCORE 2.79

    DB:2.79:Need Help With Wpn824 V2 Ip Address Problem cs


    hello ppl, i need help finding out the ip address. when i tried going on whatismyip.com i get another ip from my other modem. i have 2 modems, 1 wired and 1 wireless.. anyways i need the ip address so i can get the wpn which i can have connection for the wii and psp. any ideas?

    DB:2.79:Need Help With Wpn824 V2 Ip Address Problem cs

    The IP address you are after should be displayed in the router Basic Settings page.

    Did you really mean that you have two modems? Are you referring to two network devices?

  • RELEVANCY SCORE 2.78

    DB:2.78:Installing Wpn824 Router p8


    I bought a used WPN824 RangeMax and I'm attempting o install it without CD, etc. I tried logging in to

    DB:2.78:Installing Wpn824 Router p8

    see router reset on my sig below and reset

    then

    1. turn off the cable modem and unplug ethernet cable

    2. wait for few min (5min)

    3. turn on the cable modem only and do NOT plug any ethernet cable

    4. wait until all the light up on cable modem

    5. ONLY after all the light is up. hook up a router behind the cable modem

    6. you should able to get public IP from the ISP and it will show up in the router status when you login the router.

  • RELEVANCY SCORE 2.78

    DB:2.78:Wpn824 V2 Wireless Light Is Flashing dk


    I can connect on net with wired cord from router but no wireless.

    wireless light is blinking but not steady on like other lights

    DB:2.78:Wpn824 V2 Wireless Light Is Flashing dk

    It could also be a firewall on the PC blocking wireless (try disabling software firewalls), or you have set up wireless security incorrectly (try without security set). Have you changed the SSID from the default 'Netgear'? If not do so.

  • RELEVANCY SCORE 2.74

    DB:2.74:How To Make Wg111t Run 108mbps With A Wpn824 V2 Router? zm


    When I installed my MIMIO 108MBPS WPN824 v2 [/B][/B]router with a WG111T 108g usb adapter on my computer, my WG111T only went up to 54g not 108g. Please tell me how to make my router and my adapter run on 108MBPS speed. Anyone please let me know.

    Thanks You so please help me with this situation.

    jeromecstll

    DB:2.74:How To Make Wg111t Run 108mbps With A Wpn824 V2 Router? zm

    does the router have a SUPER-G protocol option? If not then it will only run at 802.11g compatibility mode - which is 54.

    I have the same problem

  • RELEVANCY SCORE 2.74

    DB:2.74:Wnr854t Not Connecting 1a


    I'm pretty new to this so I can use as much help as possible. I previously used the Rangemax WPN824 v2 connected to my Verizon FIOS Actiontec MI424WR and had no problems connecting wireless. I substituted the WPN824 for a WNR854T and now can no longer receive wired or wireless connectivity. The LAN light remains amber since I don't have a gig port. Do I need to have a gig port for this model to work??

    (BTW, I do connect if wired to the Actiontec).

    Thanks again for any help.

  • RELEVANCY SCORE 2.74

    DB:2.74:Computer Doesnot Detect Wireless Network k9


    hi,

    After a short period of power failure, my laptop is not detecting my wireless network. I reset my Netgear WPN824 V2 and tried again and still no network. The internet light on the netgear is flashing but the laptop still doesnot detect wireless network. I tried to enter the configuration mode by typing 192.168.1.1., the windows is unable to open.

    Please help me.

    Thanks

    DB:2.74:Computer Doesnot Detect Wireless Network k9

    hard reset the router

    visit my site for router reset and try step 1,3.

    if continue to have issue with login, try different power supply or if power supply is plug to surge.. bypass and try

  • RELEVANCY SCORE 2.74

    DB:2.74:Wpn824 V2 Giving Strange Error Msg mp


    I attempted to install the router using the CD after having used the Reset to Defaults button and following the process exactly, and I received this error screen.

    DB:2.74:Wpn824 V2 Giving Strange Error Msg mp

    hard reset and just open IE browser, should start netgear smart wizzard follow that and finish the setup. after you can login the router and setup your wireless.

    make sure you set up with WIRED ONLY

    you can read manual on how to login the router

  • RELEVANCY SCORE 2.74

    DB:2.74:Wpn824v2 Improve Wireless Range? c9


    I purchased the WPN824 v2 to improve my wireless range. My existing router is NETGEAR WGR614v4. The WPN824 does not seen to have improved the wireless range at all. I was thinking of getting one of the compatible adaptors to see if this improved the range but I have an Apple Mac and I believe the adaptros are not compatible. Is that correct? Any other suggestions on how to improve the range?

    One other question. I also cannot upgrade the firmware on the WPN824v2. Is this a mac (browser: safari) related issue as well? Any suggestions here?

    Thanks very much for any help.

    Lee

    DB:2.74:Wpn824v2 Improve Wireless Range? c9

    Network Adapter Problem

    --------------------------------------------------------------------------------

    Can u help me?

    I have trouble when i was trying to install the NETGEAR CD. I need to be complete about 20 min but some how it stopped.CAn anyone help me out?

    I have a NETGEAR RangeMAx Wireless Router WPN824 v2.

    Network Adapter Problem

    The network adapter in this computer is not responding.

    You must use the Installation Assistant on a computer with a working Ethernet adapter

    Click Quit to exit the Installation Assistant.

  • RELEVANCY SCORE 2.74

    DB:2.74:Wpn824 V2 Filesharing fd


  • RELEVANCY SCORE 2.74

    DB:2.74:Please Help: Wpn824 And Port Forwarding 3k


    Hi folks,

    This is driving me nuts. From all appearances, I can't get the WPN824 to forward port 10050. I have these ports forwarded (for example):

    DB:2.74:Please Help: Wpn824 And Port Forwarding 3k

    If you are testing this from within your own network you could be seeing a loopback problem;

  • RELEVANCY SCORE 2.72

    DB:2.72:Netgear Wpn824 V2 - Not Enough Memory!? aa


    Hi,

    After a little help..

    I recently purchased the Netgear WPN824, and have been suffering from a few drop outs and the like. Not sure why?

    The biggest problem I have come across though is with the router itself. I use uPnP and for the majority of the time it works fine. Every now and then however the programs report the port cant be seen as open and when I check the router the uPnP page hasnt updated any clients and if I make any changes and then apply, they are not applied - it sort of resets the router and then everything is fine.

    If I try and update the router (firmware) using the inbuilt facility it reports not enough memory!

    Anybody seen this?

    DB:2.72:Netgear Wpn824 V2 - Not Enough Memory!? aa

    1. some ports may work better to use portforwarding but most IM app should work with UPnP

    2. If you have firmware upgrade issue.. first hard reset your router and re try it. visit my site for router reset and try step3,4. step3 will clear the memory and step 4 reload the firmware. all after this. try upgrade your firmware

  • RELEVANCY SCORE 2.72

    DB:2.72:Wpn824 Reset fp


    I pushed the reset button on the WPN824 and held it in for at least 10 seconds. My cable company says that the router is communicating with their system. My laptop does not see the wireless router and the wireless light is not on the router. I misplaced my CD that came with the router and I need help.

    Kevin

  • RELEVANCY SCORE 2.72

    DB:2.72:Wpn824 Version Differences. m9


    Hey there everyone.

    I can't seem to find this information anywhere.

    can someone please help me to know what are the differences between WPN824 V1 and V2?

    Thanks allot

    DB:2.72:Wpn824 Version Differences. m9

    this is the whole difference? really?

  • RELEVANCY SCORE 2.72

    DB:2.72:Wpn824 V2 Vista? z3


    Hello...Sorry this question may have been asked/answered but just a simple one:

    I have bought some time ago the wpn824v2 and worked fine all the way on my xp pc...now need to upgrade to vista.The installation driver ,which came with it ,says VERSION 3.0,will this driver work/compatible with windows vista?....IF not what driver do I need please!(went to have a look on netgear support,but for that product, only a zip file come up,no idea what to do really,apart unziping it?)

    Thank you.

  • RELEVANCY SCORE 2.72

    DB:2.72:Holy Shiver!!! Help With Wpn824 V2 And Wnr2000 V2 Access Point. j3


    I am NO NETWORK ENGINEER 1st We have a WPN824 v2 as our main wireless router and want to set up our WNR2000 v2 in another part of the building as an access point. I have tried to decipher the various guides that have been posted, but WOW... getting pretty lost in there. Is there an easier way or a guide that fits better with 2 Netgear routers? Thank you for your time and help!

    DB:2.72:Holy Shiver!!! Help With Wpn824 V2 And Wnr2000 V2 Access Point. j3

    Been a differs model routers. I would use different SSID. Otherwise you cam test how it works.

    Make sure channel is the same if you are using same SSID. Otherwise use different channel. Ex. 6,11

  • RELEVANCY SCORE 2.72

    DB:2.72:Wpn824 V2 Not Connecting Or Logging In x1


    I have had a Netgear WPN824 v2 Router for about a month, has worked fine up until yesterday and I forwarded some ports for games a few days ago, the internet dropped out. So I logged into it, everything seemed to be fine, still no internet though. So I tried a reset to see if that helped, and then re installing from the CD again, but every time I get to the Restarting Network stage it says it can't find a connection. Now I cannot even log in to the router. I tried a hard reset, and the test light blinks, but then after that the power light stays on and the internet and LAN light and thats it, no wireless lights, and still can't login. PLEASE HELP, did I do the hard reset wrong, or what else could it be???

    DB:2.72:Wpn824 V2 Not Connecting Or Logging In x1

    thanks that worked perfectly,, everything back to normal

  • RELEVANCY SCORE 2.72

    DB:2.72:Can The Wpn824 Connect A Printer? pp


    I have a Brother MFC 9420CN with an ethernet card.

    Can I use my WPN824 v2 to connect this printer wirelessly to my notebook (Windows XP SP2)? The idea is to plug the printer into the router with an ethernet cable.

    Is there an additional product needed?

    I appreciate any help, Barry

  • RELEVANCY SCORE 2.72

    DB:2.72:2nd Computer Doesn't Have Access To Net xs


    I have two computers wired to my WPN824 v2. I have file sharing on and both computers can access each other's shared folders. Only one computer has access to the Internet. What do you need from me to figure out how to get the 2nd computer to be able to download web pages?

  • RELEVANCY SCORE 2.72

    DB:2.72:Wpn824 Please Help cp


    Okay I bought a WPN824 and have it working fine. However I have a huge house and I need coverage on the other side. Is there a wireless access point that works with this unit? Keep in mind I do not want to have to run any cables to this access point other than the power adapter. I want it on the other side for coverage.

    Someone please help.

  • RELEVANCY SCORE 2.71

    DB:2.71:No Internet Ueing Wpn111 ca


    I connect fine to hub WPN824 v2 but can not connect to internet onwierless computor

    DB:2.71:No Internet Ueing Wpn111 ca

    Moving to RangeMax Routers

    I suggest to read manual. you need to login the router and setup router.

    bit lack of information on how much you did on router and can not make it work..

  • RELEVANCY SCORE 2.71

    DB:2.71:Is A Adapter Really Needed? sk


    Does an adapter with the netgear wpn824 router really help signicantly? Will i still be able to get a good signal inside my house 200 ft from the router w/o any adapters or anything?

    thx

  • RELEVANCY SCORE 2.71

    DB:2.71:Rangemax Wpn824 V2 Compatible With Att/Dsl? s8


    I have the Rangemax home networking setup. I am trying to switch providers from cable to DSL. wondered if anyone knows if Netgear is compatible with ATT DSL ? what type of modem do I need to purchase for the DSL line and to hook up the Netgear wireless router? I'm not entirely computer savy...any advice would be appreciated!

    thanks

    DB:2.71:Rangemax Wpn824 V2 Compatible With Att/Dsl? s8

    Wrong area

    Moving rangemax router

    I don't see any issue

    read my router setup see my signature

    You will learn one of two

  • RELEVANCY SCORE 2.71

    DB:2.71:Router Help Needed cm


    Hello,

    I have a WPN824 v2 router. I lost my password and must reset the router now, but I have also lost the software for the router. It seems I am in some trouble. Does anyone know of a way to reach the router's settings without entering the software disc? I appreciate any and all help I can receive in this matter. Have a great day.

    -Craig

  • RELEVANCY SCORE 2.71

    DB:2.71:Limited Internet Access W Wpn824 V2 Router 1x


    We got the new WPN824 v2 Router for our wireless connections, it's working perfectly except our internet access is limited. I can go to my regular sites but yahoo messenger, AIM and even our Norton Internet Security dosn't work. I checked around to find out what the problem was and it came back to our router. Can anyone help?

    DB:2.71:Limited Internet Access W Wpn824 V2 Router 1x

    Are you sure that you are actually connected to the internet?

    What do you mean Norton Internet Security does not work?

    In some cases you will need to complete disable Norton or adjust it's properties so that you can get internet access.

  • RELEVANCY SCORE 2.71

    DB:2.71:Timze Zone Setup Wpn824 V2 c1


    Hello,

    where can i change the timezone setting ??

    Thanks in avance.

    Erwin

    DB:2.71:Timze Zone Setup Wpn824 V2 c1

    My timezone setting is located under the e-mail section at the main page. Pretty odd place to find it.

  • RELEVANCY SCORE 2.71

    DB:2.71:Wireless Networking Issues 18


    OK here is my current configuration...

    First off, I had my electriction snake two cat 5 wires into 2 RJ-45 jacks...One on my second floor and one on my first floor. These jacks will be used to connect to two Netgear Wireless-N routers (1st Floor - WNR3500 and 2nd Floor - WDNR3700). Please note that I have logged in to both of the routers and ensured that both of the Wireless-N Routers have DHCP disabled as I want these two act like Access Point with two distinct SSID and associated passwords.

    The other end of the Cat 5 wires are in my basement where I have my cable connections and cable modem. I have the cable modem connected via an ethernet cable to a WPN824 v2 wireless router. Then I have an ethernet cable going from the WPN824 v2 wireless router into an 8 port Netgear Switch (FS108). The two Cat 5 cables that I had snaked through my home are connected to this switch.

    I connected everything and I cannot connect to the internet, nor can I see the two Wireless-N Routers that I converted to Access Point. I have logged into both of those respective Wireless N-Routers and have given them the following respective SSID Wireless-N_1st Floor and Wireless-N_2nd Floor and both have different passwords as well.

    I am running Windows 7 on the laptop that I am using to log into the router.

    Can someone help or let me know what I need to do....Please also let me know if you need more information in order to help me with this problem.

    Thanks!!!

  • RELEVANCY SCORE 2.71

    DB:2.71:New Vista Laptop Can't Connect Wirelessly zs


    I just got a new laptop (vista) and for some reason it won't connect to the wireless network I have setup in my home. It is the netgear WPN824 v2 which I have updated to the latest firmware, checked for vista compatibility, tried both protected and non-protected connections, etc. I can't think of anything else. For those of you who have Vista on a laptop, is there anything I need to do to be able to connect?

    Thanks for your help.

  • RELEVANCY SCORE 2.70

    DB:2.70:Wpn824 V2 Port Forwarding Ftp ff


    Hi,

    I have a WPN824 router and cable ISP.

    I would like to set up an FTP server on my main PC or use a second.

    I will be using Fillezilla.I have tried to establish a connection,but no luck as yet.I believe it down to port forwarding issue.

    As anyone set up a FTP server with Filezilla,can anyone explain what the correct procedure for creating a FTP port forwarding is within the router.

    I have seen a view videos on youtube,each are different.

    Any help is appreciated,thanks

  • RELEVANCY SCORE 2.70

    DB:2.70:Rangemax Wpn824 V2 Intermittent Connection c7


    Hi,

    I have Rangemax WPN824 v2 and am experiencing intermittent connection big time. I have 3 wireless computers hooked into the system. Comcast tested the line and says it's fine. I lose browsing capability on all three machines simultaneously, but can still IM. Although sometimes I can't IM either. I have the latest firmware for the router and all my cpu's have recent updates. My neighbor suggested removing the splitter from the cable line and connected directly into the modem to see if this would help the stream. It didn't. I've also moved all electronic devices away from the router. I've logged into my router settings, but it's mostly greek to me. Would it help at all to change the channel or mode in the settings panel? I'm not sure how to trouble shoot from here.Can anybody help? If more details are needed I am happy to supply. Thanks.

  • RELEVANCY SCORE 2.70

    DB:2.70:Wpn824 V2 And Ntl Cable Modem Connection Help!! fc


    Ive just recently bought a WPN824 v2wireless router with Range Max adapter from PCWorld. Im looking to connect my Ntl broadband connection up to it, so i can configure my Xbox 360 to it eventually. However, im having major problems. Ive downloaded the vista patches for both the adapter and the router and ran them. I get into the smart wizard and connect up the router to my Ntl cable Modem like it says. It then starts to try and restart my network and thats where the trouble lies. It says it may take a few minutes while it gets to 100% on the status bar. When it does eventually get to 100% it comes up with ip address error and tells me that it has detected an error with network settings. How can i resolve this and get my connection up and running??? Please Help!

  • RELEVANCY SCORE 2.70

    DB:2.70:Wpn824 V2 Problem Loading 1 Specific Website??? 7z


    Hello,

    I have a quick (and I hope easy) question:

    I have a WPN824 v2 router that worked perfectly normal until about a month ago. Now it will go to any website except one

  • RELEVANCY SCORE 2.70

    DB:2.70:Need Wpn824 Cd Software kf


    looking for wpn824 software that came with the cd... i lost my cd, so i have no clue on where to download the software all the files, .exe...

    thanks

    js

    DB:2.70:Need Wpn824 Cd Software kf

    that is good works MarsMug ... aid... perferct wording

    manual is best friend.. you will more learn about our router by doing manually.

    ANY router can configure without CD that manufacture provides Any means all other manufacture as well

  • RELEVANCY SCORE 2.69

    DB:2.69:Netgear Wpn824 V2 Pdf Guides x3


    HI to all

    i am newbee at netgear and i buying netgear WPN824 v2 router so please i need help regarding setup pdf and configrations pdf if there any site or link which provide me guide i am new to hardware firewall so please i need some pdf,doc to read and get little knowledge regarding its setup......etc

  • RELEVANCY SCORE 2.68

    DB:2.68:Help With Wpn824v2 Please!!!! s9


    I have recently bought the WPN824 V2 router. Here is what i am trying to do. I want to use my laptop in my house, my other computer in my garage and send the wifi signal to my in laws who are 2 streets over. it is about 400ft away. my laptop and other computer work fine, but how can i get the signal to the inlaws?? what do i need and how do i configure my system? Any help would be much appreciated!!!

    DB:2.68:Help With Wpn824v2 Please!!!! s9

    you can not add andy antenna to your router.. you need direction antenna.

  • RELEVANCY SCORE 2.67

    DB:2.67:Wpn824 Nat Keep Alive 9j


    Does the 'keep alive' facility exist on the WPN824 and if so how is it accessed?

    Your help will be appreciated.

    DB:2.67:Wpn824 Nat Keep Alive 9j

    Does the 'keep alive' facility exist on the WPN824 and if so how is it accessed?

    Your help will be appreciated.

  • RELEVANCY SCORE 2.65

    DB:2.65:Vpn Issue Wpn824 V2 m8


    Hello everyone,

    I am stumped. I am attempting to establish a PPTP connection between two home computers. When there are no routers used and windows firewall on I can establish the VPN connection. I then used a Linksys router on the one computer and left the other computer without a router. I was able to establish a vpn connection and access shares still. My problem is when I connect the WPN824 v2 Netgear router thats when it tells me unable to establish connection. By process of elimination I have centered in on the fact it is the WPN824 v2 stopping me from establishing a connection. I have enabled port 1723 and forwarded it to the vpn server. However when I try to connect using the WAN IP it tells me I am unable to connect. I am using the built in windows vpn server and client. If anyone could help me learn what I am doing wrong I would greatly appreciate it. Any more information needed please ask.

    Thank you

    DB:2.65:Vpn Issue Wpn824 V2 m8

    Figured it out. Ports 50 and 51 had to be open.

    Jeez that was a headache. Thanks for anyone that viewed this.

  • RELEVANCY SCORE 2.64

    DB:2.64:Wpn824 V2 And Rangemax 240 Wireless Usb Adapter zd


    I am using a WPN824 v2 as our main router and was given a Rangemax 240 wireless usb adapter that I am trying to use for a PC. I can't get the 240 to detect any wireless networks. I already use a laptop with a netgear card and an iphone as well so I know the 824 is working. Can anyone help?

    Thanks,

    John

    DB:2.64:Wpn824 V2 And Rangemax 240 Wireless Usb Adapter zd

    240 was made for 834PN models

    WPN824 support to 108Mbps

    try BG mode in the WPN824 router's settings

  • RELEVANCY SCORE 2.64

    DB:2.64:Wpn824 V2 Is Unable To Access Realplayer 9j


    I am unable to sign in to realplayer while using my WPN824 v2 router using 2.0.20 firmware. After troubleshooting with realplayer technical support we found that I could sign in and connect to realplayer when I bypassed the router and plugged in my computer directly to the cable modem. Though whenever I try signing in either via ethernet cable or my WPN 111 through the router I am unable to connect with realplayer. The technical support agent seemed to think that the routers firewall is blocking the connection.

    Is there any settings I can change to fix this? Currently my Keyword Blocking is set to Never as is Service Blocking. I even disabled Trend Micro Security Service. Also my NAT type is set to open. Any help would be appreciated, thanks.

  • RELEVANCY SCORE 2.64

    DB:2.64:Eim - Enterprise Instant Messenging fx


    Does anyone know why NETGEAR's RangeMax wireless router (WPN824 v2) won't let me access an instant messaging tool?

    It's called EIM or JABBER.

    DB:2.64:Eim - Enterprise Instant Messenging fx

    Also, are you connecting to a standards based Jabber server such as Wildfire or JabberD? If so what client are you using?

    :P

  • RELEVANCY SCORE 2.64

    DB:2.64:Wpn824 Slow Wired Connection 7m


    Ok, I'm new here and need a little help. I'm running Comcast cable internet. When I connect directly to the cable modem I average 6-10 mbps, or more. When I connect my Netgear WPN824-with latest firmware, it slows down the wired connection to about 2-3 mbps, or slower. Do I need to purchase a new router? What is causing the router to slow down?

    And yes the wireless is also the same slow speed. Thanks in advance for the help.

    DB:2.64:Wpn824 Slow Wired Connection 7m

    firewall on router can change the speed. try disable SPI or Port scan Dos in the router and see

  • RELEVANCY SCORE 2.64

    DB:2.64:Just Bought Rangemax Wpn824 Need Help With Speed.. sx


    this is my first time ever setting up a wireless router. i bought the WPN824 and set it up..when i use an ethernet cord on my laptop i get speeds of 100 mbps...when i use it wirelessly i am only getting 54 mbsp and below..i have it set to auto 108 in the settings is there anything else i should do?

    DB:2.64:Just Bought Rangemax Wpn824 Need Help With Speed.. sx

    ok well i didnt understand what u said..that is why i asked ...

    DONE

  • RELEVANCY SCORE 2.64

    DB:2.64:Netgear Wpn824 V2 Router Blocking Websites cz


    Hi my router has started blocking access to a number of my own websites and domains such as

  • RELEVANCY SCORE 2.64

    DB:2.64:Wpn824 Config s1


    Hi,

    I'm trying to configure my WPN824 to talk to my Siemens 4200 broadband modem. My ISP said I need to configure the VCI/ VPI to identify the VCL on the wireless router. In my modem this is configured on the WAN Interface screen but I can't see where these settings are setup on the WPN824 config. setup?

    Does anyone know if the WPN824 supports routing through ATM?

    Cheers

  • RELEVANCY SCORE 2.64

    DB:2.64:Truemobile 1300 Mpci Card Not Connecting To Netgear Wpn824 V2 Router j8


    I'm trying to set up a wireless network at my home using my Inspiron XPS laptop, it's built-in Truemobile1300 WLAN Mini-PCI card with a Netgear RangeMax WPN824 v2 wireless router.

  • RELEVANCY SCORE 2.64

    DB:2.64:Turn Rangemax Wireless Router Wpn824 Into Wireless Booster? a7


    Hi,

    I have a RangeMax WPN824 v2 Wireless G router, and wanted to see if I can use it to boost a wireless signal.

    I don't really want to drill holes in the house to lay a LAN cable from my first router to my this one, but perhaps is it possible to use this router to boost a specific signal?

    If not, could I use this router as a wireless receiver? The wireless card I use in my pc gets a weak signal, I'm sure that the router could be placed in a position in the room where it will get a better signal (where the my pc can not be placed).

    So basically all I want to ask is when I have a weak wifi signal, can this router help to get a slight boost?

    DB:2.64:Turn Rangemax Wireless Router Wpn824 Into Wireless Booster? a7

    there is tons of out there. As long as your have wireless adapter that can adapter external antenna on PC side then you good.

    hyperlinktech.com/

  • RELEVANCY SCORE 2.63

    DB:2.63:Wpn824 Config js


    Hi,

    I'm trying to configure my WPN824 to talk to my Siemens 4200 broadband modem. My ISP said I need to configure the VCI/ VPI to identify the VCL on the wireless router. In my modem this is configured on the WAN Interface screen but I can't see where these settings are setup on the WPN824 config. setup?

    Does anyone know if the WPN824 supports routing through ATM?

    Cheers

  • RELEVANCY SCORE 2.63

    DB:2.63:Netgear Wpn824 V2 (New Firmware) pd


    Hi, i have a Netgear WPN824 v2 with: V2.0.26_1.2.17 Version and i think that it's a bug in 'Port Forwarding / Port Triggering' section, i have port forwarded an application on a private ip and doesn't show in the list..

    The port forward list shows only 4 entries.

    The second question, when will be realised a new firmware for my router? I'm waiting and waiting and waiting..

    Thanks...

    DB:2.63:Netgear Wpn824 V2 (New Firmware) pd

    send bug report and question to my.netgear.com

    make sure you HARD RESET after flashing firmware.

    see router reset on my sig below

  • RELEVANCY SCORE 2.63

    DB:2.63:Wpn824v2 Losing Connection ap


    hi guys hope some one can help me with this problem i have a wpn824 v2 wireless router which has been working fine untill now the problem is all my wireless stuff (ps3,laptop,phone,and other pc) are losing the wireless signal every 10-15 mins but the wired pc is working fine with no connection problems. any help will be much appreciated

  • RELEVANCY SCORE 2.63

    DB:2.63:Wpn824 V2 Sending Null-Packets Continuously 3c


    Having accepted this unnecessary traffic for a while, I have come to the point that I want to try to solve it. The router works fine wrt signal strength, stability, performance etc. but the continuous null-traffic will soon drive me mad (I also need the CPUs for other purposes)...

    I believe the problem is the same as one described earlier on this forum (which remains unresolved):

    DB:2.63:Wpn824 V2 Sending Null-Packets Continuously 3c

    Problem solved - I gave up and bought a D-Link DIR 635. No ghost packets to adapter anymore.

    The problem may of course have been related to user error in the configuration of the WPN824 router, since the router abviously works perfect in most other cases. I do not have sufficient basis to conclude that there was an error in the NETGEAR product, maybe I got a Monday product.

    Anyway, thanks for your attention.

  • RELEVANCY SCORE 2.63

    DB:2.63:Portforwarding Error...Help. af


    First off, I have model WPN824 V2.

    Ok, so I need to portforward one of my ports.

    I set up my static IP and everything, I go to my routerlogin.com account, went to portforward/port triggering tab etc.

    I clicked Add Custom Service, entered the name, port I want to unblock etc.

    Then I think this is where my problem is, I entered the wrong IP. Do I enter my static IP address I made? Or what?

    At first I entered my router IP, but then I think I need the static IP or something...... When I try to make another one, it says its interfering with another thing but the one I already created isnt under the list, so I can't edit or delete it.

    Help????

    DB:2.63:Portforwarding Error...Help. af

    You should specify the ip address of the pc or xbox or any other device in

    server ip address for which you want to open the port .

    To answer your last question ,you have option delete service: at the bottom,

    where you can delete the old one and add a new one.

  • RELEVANCY SCORE 2.63

    DB:2.63:Wpn824 V2 Firmware Update Help! dz


    I have a WPN824 v2 and downloaded the firmware WPN824V2-V2.0.26_1.2.17NA.chk. Clicked on upload and after sitting at 100% complete for an hour I restarted the router. Not much more I could do. Now all the lights blink like before but I can't comunicate with the router. Not with the original 192.168.1.1 or 192.168.0.1 or anything. Push the reset button on the back and it seems to reset but happens so fast it doent seem to really do anything. Lights flash after ten seconds and back to nothing. Is there any way to hard reset these things? HELP!

  • RELEVANCY SCORE 2.63

    DB:2.63:Rb-Wn111 Adapter With Wpn824 V2 ???? 7c


    Hey guys. Not a lot of experience with wireless so I'm gonna need some guidance.

    I already have the router, using it as 'wired' for the time being. I'm looking at these adapters here...

    DB:2.63:Rb-Wn111 Adapter With Wpn824 V2 ???? 7c

    Hey guys. Not a lot of experience with wireless so I'm gonna need some guidance.

    I already have the router, using it as 'wired' for the time being. I'm looking at these adapters here...

  • RELEVANCY SCORE 2.62

    DB:2.62:Aes-Ccmp Or Wpa2 3x


    Does the RangeMax WPN824 v2 router support the AES-CCMP or WPA2 standards? I would like to upgrade. Thanks for answering.

  • RELEVANCY SCORE 2.62

    DB:2.62:Wpn824 V2 Xbox Live p7


    Hello,

    I recently bought a Wpn824 Wireless RangeMax router and i hooked it up everything works fine. I am able to connect to xbox live perfectly fine BUT when i try to connect to Some of my friends on xbox live it tells me i cant connect because of the NAT (network adresss translation) may be moderate or strict.

    But when i checked it out my NAT is OPEN as its suppose to be. This happens to a lot of my friends and my old router lets me connect to them but now i cant. I was reading something about port forwarding to allow them to connect or something??Can someone please help thanks alot.

    DB:2.62:Wpn824 V2 Xbox Live p7

    i think you should take a look at this page:

  • RELEVANCY SCORE 2.62

    DB:2.62:Product Help - Wpn 824 V2 d9


    HI,

    Short Q: what is the updated version of WPN824?

    So this may seem like a very basic question, but I've been having trouble deciphering the specs listed on a lot of products. For some reason they all seem to be based on different criteria and in different layouts (maybe it's just me).

    Anyway, in my parents house we've had a WPN 824 v2 for a few years, works perfectly for the requirements.

    I've now moved out and need to buy a new router. Essentially I want to get the up to date Wireless N version of the WPN824. Can anybody point me to a model number?

    Thanks

    Dave

  • RELEVANCY SCORE 2.62

    DB:2.62:In Need Of Help, Lots Of Help. dk


    Alright, Well I'll first start off with the name of my router, which is netgear rangemax wireless router WPN824 v2, and i decided to come here instead of getting help off the fine while paying 4 dollars.

    Well The problem is that i tried to access my internet today and once i got on it took me to routerlogin.net and It said my IP address had been moved to 10.0.0.2 and from there it detected my PPoE and i had to login but apparently I forgot my username and password so i reseted my router back to factory settings and i typed in admin for username and password For password and did all of that but it's not working because after that it says it cannot detect my internet connection, Someone help please?

    DB:2.62:In Need Of Help, Lots Of Help. dk

    Um, I have not yet contacted my ISP because I forgot to ask what does bridge mode do? I also, have to say that my router is connected to a motorola modem.

  • RELEVANCY SCORE 2.61

    DB:2.61:Update Query c1


    Good Morning..
    This update query is ginving me an error of SQL command not properly ended.:

    UPDATE tt_order_info_variable
    SETnumeric_value = 1
    from tt_order_info_variable v, tt_order_info_variable v2, tt_order_info o
    where
    v.var_no = 180
    and v.order_no = o.order_no
    and v.order_no = v2.order_no
    AND v2.var_no = 2046
    AND ( o.status IN (2,3)
    OR dateadd(hh, spac_setup_temp_order_tables.chip_sticky_hours, getdate()) = v2.date_value

    Please help!

    DB:2.61:Update Query c1

    Try this ...

    UPDATE tt_order_info_variable v
    SET numeric_value = 1
    where v.var_no = 180
    and v.order_no = 2046
    and exists
    (select null
    from tt_order_info o
    where o.order_no = v.order_no
    and ( o.status IN (2,3)
    OR dateadd(hh, spac_setup_temp_order_tables.chip_sticky_hours, getdate()) = v.date_value)
    )

  • RELEVANCY SCORE 2.61

    DB:2.61:Downgrading Wpn824 V2'S Firmware da


    i want to downgrade a WPN824 v2's V2.0.10_1.2.17NA firmware to the 2.0.06 because it keeps rebooting. when new clients connect or i heavily start using internet. question is that will downgrading corrupt the router?

    DB:2.61:Downgrading Wpn824 V2'S Firmware da

    i want to downgrade a WPN824 v2's V2.0.10_1.2.17NA firmware to the 2.0.06 because it keeps rebooting. when new clients connect or i heavily start using internet. question is that will downgrading corrupt the router?

  • RELEVANCY SCORE 2.61

    DB:2.61:Wpn824 V2 Need Help!! O 1s


    Laptop: HP dv 9500t (Windows Vista Home Premium (32-bit))

    Wireless card: Intel(R) PRO/Wireless 4965AGN Network Connection and Bluetooth(TM)

    Router: WPN824 V2

    Firmware Version V2.0.10_1.2.17NA (upgraded)

    Connection: SBC DSL

    Modem: Siemens Speedstream 4100

    i just started setting up the router and my new laptop tonight. at first all was well, took me 5 mins to set up the connection and wireless security on my desktop. The connection was fast and stable

    Then... i restarted my laptop after some system updates, both wired and wireless connections stopped working. (limited connectivity)

    I then tried out the connection on another laptop (XP) as well as my desktop (XP). both worked fine.

    i stumbled across this forum as i was searching for answers and tried several things mentioned:

    1. updated the driver for my wireless card

    2. updated router firmware

    3. disabled TCP 6

    4. tried different security settings and channels

    as of now, it's still not working... i dunno what to do next. =/

    any advice would be much appreciated!!

    p.s. i tried to ping the router on my new laptop with Command Prompt, there's no packet losses, the average time is only 2 ms

  • RELEVANCY SCORE 2.61

    DB:2.61:Wpn824 V2 And Wpn834b V2 8m


    Does anyone know if you can have a WPN824 as a base station connected to a cable modem and configure a WPN834B as a repeater station repeating the signal from the WPN 824?

    DB:2.61:Wpn824 V2 And Wpn834b V2 8m

    wpn824 v2 should have WDS so I think you should able to.

  • RELEVANCY SCORE 2.61

    DB:2.61:Wireless Card mj


    I need to buy a card to install in my Dimension 8100 to connect with a NetGear Range Max router (WPN824 v2). What should I buy?

    DB:2.61:Wireless Card mj

    I need to buy a card to install in my Dimension 8100 to connect with a NetGear Range Max router (WPN824 v2). What should I buy?

  • RELEVANCY SCORE 2.61

    DB:2.61:Problem With Wpn824 V2 jx


    hey im trying to connect my iphone 4 and xbox 360 to my wireless connection and when i try to go so neither acknowledge that i have a wireless connection. i've tried everything from resetting the adapter to unplugging all the wires from both the adapter and comcast box. please help asap

    DB:2.61:Problem With Wpn824 V2 jx

    maybe your wireless router has an issues with wireless. does any other wifi device can see your wireless SSID?