• RELEVANCY SCORE 4.37

    DB:4.37:After Installing Windows Essential My Pc Is Constantly Re-Starting 3j




    Hi,

    DB:4.37:After Installing Windows Essential My Pc Is Constantly Re-Starting 3j

    ...the fact remains - i just cannot use the system once starts - it gets prepared reboot - it does not all me to do any thing even [in Safe Mode]

    You will find support in the appropriate forum here =
    http://answers.microsoft.com/en-us/windows/forum/system

  • RELEVANCY SCORE 3.25

    DB:3.25:Windows Live Essential 2011 a9




    Having problems installing windows live essential

    DB:3.25:Windows Live Essential 2011 a9

    You will find specific support for installing/uninstalling/upgrading to Windows Live Essentials 2011 in this forum:http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

    ~Robear Dyer (PA Bear) ~ MS MVP (IE, Mail, Security, Windows Update Services) since 2002 ~ Disclaimer: MS MVPs neither represent nor work for Microsoft

  • RELEVANCY SCORE 3.21

    DB:3.21:Window Live Mail Stops Responding Or Fails To Start After Installing Windows Live Essential 2011 Kb2434419 k1




    Hi, Window live mail stops responding or fails to start after installing windows live essential 2011 (KB2434419), once it opened but fould all contacts are lost, pls help. Thanks regards,Girish,
    *** Email address is removed for privacy ***

    DB:3.21:Window Live Mail Stops Responding Or Fails To Start After Installing Windows Live Essential 2011 Kb2434419 k1

    Hi, The windows live mail is not responding when I open, some times it opens, but contacts are not be seen...kindly provide an solution...regards, Girish. Pls reply to
    *** Email address is removed for privacy ***.

  • RELEVANCY SCORE 3.18

    DB:3.18:After Installing New Updates On My New Computer, I Could Not Boot Into Windows. Did A System Restore And Booted Up. How Should I Choose What Updates Are Essential And Which Ones Can I Avoid 7j


    Windows 7.

    DB:3.18:After Installing New Updates On My New Computer, I Could Not Boot Into Windows. Did A System Restore And Booted Up. How Should I Choose What Updates Are Essential And Which Ones Can I Avoid 7j

    Hi,
    I would suggest you to refer the link below and check if it helps.

    Updates: frequently asked questions:
    http://windows.microsoft.com/en-US/windows7/Updates-frequently-asked-questions
    http://windows.microsoft.com/en-US/windows7/products/features/windows-update

    Note: I would recommend you to install all the updates that you are getting on the computer.

    Hope this information is helpful.

  • RELEVANCY SCORE 3.13

    DB:3.13:Error 0x80040705, Source Dotnet In Windows Live Essential Setup ms


    I was trying installing Windows Live Essential, but it failed because of the error 0x80040705, source: dotNet40. I have read all the solutions, installing Net.Framework, but it doesn't work, too! I've understood there's a problem with Windows Updated,
    I've downloaded FixIt Tools to fix it, but it doesn't find any problem. How could I actually install Windows Live Essential?

    DB:3.13:Error 0x80040705, Source Dotnet In Windows Live Essential Setup ms

    I was trying installing Windows Live Essential, but it failed because of the error 0x80040705, source: dotNet40. I have read all the solutions, installing Net.Framework, but it doesn't work, too! I've understood there's a problem with Windows Updated,
    I've downloaded FixIt Tools to fix it, but it doesn't find any problem. How could I actually install Windows Live Essential?

  • RELEVANCY SCORE 3.09

    DB:3.09:Is There A Way To Bundle Most Of The 70 Updates After Installing Sp2 xp


    I work at a computer repair shop and constantly reformat Vista machines. I need to know if there is a way to download and burn or deploy the 77(avareage) updates after installing Windows Vista Service Pack 2. Thanks in advance for any help.
    Mark

    DB:3.09:Is There A Way To Bundle Most Of The 70 Updates After Installing Sp2 xp


    I need to know if there is a way to download and burn or deploy the 77(avareage) updates after installing Windows Vista Service Pack 2. Thanks in advance for any help.
    Mark

    I am simply tring to get a vista machine to do it's updates. It seems with "essiantials" defender
    is supossed top be removed or turnmed off. But this machine is running slow, crashes several
    times a day and the internet connection gets disconnected. Attempting to remove programs
    from the program manager locks up the machine, even when the ethernet cable is un-plugged.

    There arenow 846 hot-fixes and updates. March 2013. Some are not relative to any thing
    my machine is doing or not doing. Why can't MS replace the garbage-can of information and suggestions with the "fix-it-wizard." . . .?

    Cullen

  • RELEVANCY SCORE 3.06

    DB:3.06:Windows Security Essential Installation - Extraction Failed 18


    I have downloaded "windows security essential" installer - mssefullinstall-x86fre-en-us-xp.exe, when I ran the installer, it was extracting files, then displayed a square window, saying windows security essential extraction failed.

    Then I ran the installer again, it ran (extracting files) but nothing show after.

    DB:3.06:Windows Security Essential Installation - Extraction Failed 18

    I am having the same problem. I removed Security Essentials and downloaded the latest version. During the extraction of the files, I got the message 'Extraction Failed'... 'the volume of the file has been externally altered so that the opened
    file is no longer valid'.

    What operating system and service pack?
    Prior Security Software?
    Any security software still installed?
    A possible reason for this problem is that you have conflicting security software installed fully or partially on the PC. Remove all other security software from the PC.
    You may need to use a cleanup tool to remove your prior security software:
    http://social.answers.microsoft.com/Forums/en-US/msestart/thread/407bf6da-c05d-4546-8788-0aa4c25a1f91
    Be sure to review this post:
    Check list for installing Microsoft Security Essentials

    If that fails to resolve the problem, open an email support case:

    To open an email support case, start here:
    https://support.microsoftsecurityessentials.com/

    -steve

    ~ Microsoft MVP Windows Live ~ Windows Live OneCare| Live Mesh|MS Security Essentials Forums Moderator ~

  • RELEVANCY SCORE 3.05

    DB:3.05:Security Essential Error Codeox8004ff07 p3


    my windows vista ultmate was waring well as itis genuine withsecurity essential ,then suddenly after several updates I got a message that my windows is not genuine and security essential stopped-why that happened?

    DB:3.05:Security Essential Error Codeox8004ff07 p3

    This is very useful helpfulinformation - thank you so much for sharing it with us

  • RELEVANCY SCORE 3.02

    DB:3.02:Windows Live Essential Problems j8


    I am using Window 7 ultimate ,I have installed windows live essential recently.But my windows live mail doesnt responds after clicking open .I tried reinstalling but that doesnt work. Please help me.

    DB:3.02:Windows Live Essential Problems j8

    Hi snair22,

    Since you've tried to reinstall and this issue persisted it is possible that this issue is caused by a corrupted remnant of your Windows Essentials. As additional troubleshooting step please perform a repair to your Essentials programs:

    1.Press Windows + R, input AppWiz.cpl, click
    OK.
    2. Select Windows Essentials 2012 / Windows Live Essentials, then click
    Uninstall/Change -or- Remove.
    3. Click Repair all Windows Essentials Programs.

    If this issue persisted after the repair it is possible that the damage is beyond repairing. If that's the case please perform a clean reinstallation.
    Clean Install is different from manually removing then reinstalling the program. This process has steps that would permanently remove allEssentials related files on the system giving you a fresh new state to work on.

    1. How to uninstall Windows Essentials via CMD
    line parameter
    2. Reinstall using the offline installer found in this link.

    Let us know what happens afterwards.

    Regards,
    Gerard G.

  • RELEVANCY SCORE 3.01

    DB:3.01:Computer Constantly Reboots After Installing Windows Xp Sp3-- Stop 0x7e za


    i was installing xp sp3 on reboot it kept on rebooting. I went into advance troubleshooting and disabled automatic reboot on failure.Restarted my computer and thefollowing technical information showed on screen this ocurred on an intelchip board.

    Stop: 0x0000007E (0xc0000005, 0xF74A7A3B,0xF789E324,0xF789E020)

    F7tmgr.sys - Address 0xF74A7A3B base at F74A0000

    what does this mean. This occurred after installing xp sp3 after rebooting.

    How do i fix it.

    DB:3.01:Computer Constantly Reboots After Installing Windows Xp Sp3-- Stop 0x7e za

    I have scanned computer in safemode withmalwarebytes and there were no malware detected. on restarting the computerthe problem still exists. when i remove sp3 from the computer the computer runs.

  • RELEVANCY SCORE 2.98

    DB:2.98:\Lib\Classes.Zip Is Missing After Installing Jdk1.1.8 On Windows Xp c9


    hello
    i installed JDK 1.1.8 on my windows XP system, but after installation \lib\classes.zip file is missing from the installed folder. can anybody help, and tell what is the problem.
    this JDK 1.1.8 only is essential as i m working on a project.

    DB:2.98:\Lib\Classes.Zip Is Missing After Installing Jdk1.1.8 On Windows Xp c9

    ejp wrote:
    The event model changed between 1.0.2 and 1.1.1, so he's probably OK with that part of it.Ah, O.K. That's right. I couldn't remember for sure if it was from 1.0 - 1.1 or from 1.1 - 1.2 ;-)

  • RELEVANCY SCORE 2.97

    DB:2.97:No Internet Connections Or Limited After Wakeup From Sleep Mode dc


    I had win 8.1 After installing the update for win 8.1, I constantly loose my Lan connection after wakeup from sleepingmode

    DB:2.97:No Internet Connections Or Limited After Wakeup From Sleep Mode dc

    Hi Magioros,

    Thank you for providing an update on the issue.

    Since, the problem is due to thePanda Gold protection, you may uninstall the software (if it's not a paid version) or contact
    Panda support for further assistance on the issue.

    Please let us know if you have more queries on Windows.

  • RELEVANCY SCORE 2.97

    DB:2.97:Cannot Upgrade Essential fm


    after installing the microsoft security essential i can not upgrade . i get error code ox8024402c every time .

    DB:2.97:Cannot Upgrade Essential fm

    Hi Tooraj,
    This forum is for System Center Essentials(SCE) related issues. For questions about
    Microsoft Security Essentials(MSE), please use the following Microsoft public forums, which would be the best resource for your question.

    Microsoft Security Essentials Forums
    http://social.answers.microsoft.com/Forums/en-US/category/mse
    Hope it helps,Yog Li - MSFT

  • RELEVANCY SCORE 2.96

    DB:2.96:I Cant Play Wildtangent Hp Games Games While Using Windows Security Essential pc



    I can't run HP Games (WildTangent games) on my computer. While unlocking the code, it says the code is invalid, however technical support from WT says contact you security developer. I am new to Windows Security essential, and this problem started
    after installing Windows7 and Security essential.
    Microsoft Security Essentials Version: 1.0.2498.0
    Antimalware Client Version: 2.1.6805.0
    Engine Version: 1.1.6402.0
    Antivirus definitions: 1.95.2583.0
    Antispyware definitions: 1.95.2583.0

    DB:2.96:I Cant Play Wildtangent Hp Games Games While Using Windows Security Essential pc

    Perform these checks:
    Verify that you have removedall other real-time antimalware products that were ever installed on your PC, including free/trial products that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malwarebytes
    (paid), etc). Then, use the cleanup tools here: List of anti-malware program cleanup/uninstall tools

    Verify that your PC clock is correctly set.If not, correct it.
    Verify that Windows Defender is uninstalled (if XP), or Disabled (if Vista/W7).
    Verify that you are up-to-date with SERVICE PACKS and updates (including .NET and IE).Yes, it can take some time to do this.
    Verify that the Windows Firewall is on, and set to defaults.
    Verify that you are using version2.0.657.0 of MSE (as of 2010-12-16).

    Then, restart your PC.

    You may need to remove and reinstall MSE as well.If so, use the procedure(s) here to uninstall MSE:

    Uninstalling MSE. Then, use IE or Firefox, and go towww.microsoft.com/security_essentials and click DOWNLOAD.

    If the problem persists, submit a support case to Microsoft:https://support.microsoftsecurityessentials.com/?scrx=1
    Doc

    Computers verified since 1972

  • RELEVANCY SCORE 2.96

    DB:2.96:Running Windows Vista Constantly Reinstall Same Updates 9c


    I have a compaq presario c730 that is running windows vista that is constantly down loading and installing the same updates over and over

    DB:2.96:Running Windows Vista Constantly Reinstall Same Updates 9c

    which update(s) are you trying to install? (KB Number)

    How to ask a question
    http://support.microsoft.com/kb/555375

    It helps those answering your questions if you provide:

    what is your full version of windows (32bit or 64bit) and service pack level. (Right-click on My Computer select Properties: What Windows version is displayed in the resulting General tab (e.g., Windows XP Professional Service Pack 1; Windows
    Vista Home Edition Service Pack 2)?
    what browser (exact version) you are using.
    what anti-virus application or security suite is installed and is your subscription current?
    Is a 3rd party firewall being used in place of the native Windows firewall ?
    what other antimalware products are installed and running? .
    what ərror are you getting while trying to install updates?
    Please do so in your next reply.
    The more information you provide will help someone to provide you with a relevant solution.

    Try the troubleshooting steps provided in the link below to resolve the issue.
    How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update
    http://support.microsoft.com/kb/910339

    UTC/GMT is 23:58 on Saturday, December 17, 2011

  • RELEVANCY SCORE 2.93

    DB:2.93:Windows Defender Turned Off. x7


    Windows Help suggested the problem might be a conflict after the Windows Essential install. After installing Windows Security Essentials Windows Defender didturn off. Which security feature is better in your opinion for Windows Vista 64 Home Premium version
    6? Should I uninstall Essentials or just leave it alone? Also, I recently installed OpenOffice 3.3, any help would be appreciated.

    DB:2.93:Windows Defender Turned Off. x7

    Not trying to install anything. How can I turn on WD? two weeks ago it was on, now not. Suspect a software vendor has changedc it to useir product. Berle
    Several security products will disable Defender to prevent a conflict. If you are using another security product that provides antispyware protection, that could be the cause. If not, post your details to the Windows Security topic for your version of Windows.
    This forum area is for MSE discussion.
    -steve

  • RELEVANCY SCORE 2.89

    DB:2.89:Error Message After Downloading Windows Live Essentials Beta Version. zs


    I can't get rid ofthe following error message or uninstall the programerror after installing a new Beta version of windows live essential beta.

    Thanks in advance

    Error message:
    wlstartup - Entry Point Not found
    The procedure entry point ?RMloadColorRef@@YGKPBDPB_WKKK@Z
    Could not be located in the dynamic link library UXCore.dll.

    DB:2.89:Error Message After Downloading Windows Live Essentials Beta Version. zs


    http://www.windowslivehelp.com/
    Welcome to the Windows Live Solution Center
    Kindly repost your question in the above Windows Live Forums.
    Cheers.

    Mick Murphy - Microsoft Partner

  • RELEVANCY SCORE 2.89

    DB:2.89:Windows Xp Sp3 Freezes Up After Recent Update Of Mse. j7


    PC was running fine until Micrcosoft Security Essential Update on 10/10/10. Now it freezes up constantly--even in safe mode. I am able to system restore to 9/9/10 from safe modeand seems to run fine. MSE says system at risk and need to do update. Have
    done this several times, did add .LNK Extensions to be ignored by MSE--seemed to work for a while, now getting system freeze again. What's up?

    DB:2.89:Windows Xp Sp3 Freezes Up After Recent Update Of Mse. j7

    Hi,
    As the issue is related to Microsoft Security Essentials update, please post your issue on the Microsoft Security Essential Forums for further assistance.
    Here is the link:
    http://social.answers.microsoft.com/Forums/en-US/mseupdate/threads

    Regards,
    Afzal Taher-Microsoft Support.
    Visit our
    Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.87

    DB:2.87:I Tried Installing Microsoft Essential In My Laptoprunning Original Licesenced Windows 7 But Still I Am Getting Error Message Ending With O7634,, dm


    i treied installing microsoft essential in my laptop(running original licesenced Windows 7) but still i am getting error message ending with o7634,,,i have tried all suggestions given on Microsoft website but its of no use,,kindly help me with the installation
    process.(step by step procedure requested)

    DB:2.87:I Tried Installing Microsoft Essential In My Laptoprunning Original Licesenced Windows 7 But Still I Am Getting Error Message Ending With O7634,, dm

    Hi hammadarif,

    I assume it was a typo and you meant 07643 (in fact, 0x80070643) vs. 07634 (as that's infinitely more common and I'm not even familiar with the other one), but first we'll address issues that might be causing that error and some potential solutions for them
    and then we'll go into step-by-step installation procedures that will hopefully get you past that problem. If not then I've included how to address a potential infection that may be causing installation issues and then finally provide a link to Microsoft
    Support where you can submit a case for free e-mail assistance if all else fails. But one thing at a time:

    For information about what to do concerning that error, see the following thread:http://answers.microsoft.com/en-us/protect/forum/protect_start/installation-error-0x80070643/908fad3e-f9fc-4d8a-be83-ae7d3bc48db5.

    The following may also be useful, but mostly if using XP (though some of it may apply to other OS):http://answers.microsoft.com/en-us/protect/forum/protect_start/microsoft-security-essential-error-0x80070643/85460032-9fcb-4743-be6b-e703c1ee6794.

    ******************************************************************

    Here are general instructions for installing MSE if you get past that or if this helps you avoid that error:

    To uninstall MSE (who knows what's there after all these attempts, so best to start from scratch), proceed as follows:http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4.

    To re-install, check out this article and follow ALL the procedures:
    http://answers.microsoft.com/en-us/protect/forum/protect_start/check-list-for-installing-microsoft-security/bf757e6a-e320-4a67-92bc-767e6acb26c4 - but also check out the next paragraph before you begin the download.

    If you do or ever did have any other AV program installed on your computer (even if you didn't use it), you need to make sure they are all uninstalled and fully removed before you install. To fully remove them, check out this listing of removal toolshttp://social.answers.microsoft.com/Forums/en-US/msestart/thread/407bf6da-c05d-4546-8788-0aa4c25a1f91
    or the listing in that article at the bottom under troubleshooting steps (why this link isn't at the top near things to do first where it discusses removing all the prior and current AV programs is beyond me) or, if not on the lists, go to the website of the
    AV software and get and use the removal tool for that product. You cannot just uninstall these programs – you MUST also use the removal tool – even if the uninstall was years ago but you didn’t use a removal tool at the time.

    To install, go to
    http://www.microsoft.com/en-us/security_essentials/default.aspx and click on languages and locales at the bottom of the Download button and then choose your language and the appropriate version for your operating system. When you download, save it to the
    desktop (rather than running it). When finished, right click on the installation icon and click run as Administrator (even if you’re logged in as an administrator) as I’ve found this sometimes helps. If the error immediately occurs again, skip ahead to the
    next section on malware detection and removal.

    Then you need to configure your settings, set a scheduled scan, enable real-time protection, update MSE, and then run a quick scan (or a full scan if you have time).

    I also recommend the following setup for MSE (though the decision is yours - I've just found this helpful and the most effective and best way to set it up and is how I have mine configured):

    Make sure that ALL threat levels are sent to Quarantine where you can then decide whether or not to allow them or leave them there, or remove them. It is the safest solution for having the most options for dealing with the situation. Quarantine is as safe
    as removed, but in some cases you may want to remove them to be more certain - and with this one I would remove it (when the time comes). To do this, open MSE, click on the Settings Tab, and for each of the threat levels, set the action to be Quarantine and
    save.

    Go to the History tab and click on allowed and unless you specifically placed something in allowed, remove everything else from the allowed category. Only put things there that you ABSOLUTELY know are not problems (are "false positives") and triple-check
    before you do it as doing this could allow a real threat to bypass security and infect you and it won't be detected or rather won't be reported or acted upon by MSE.

    Go to the Settings Tab and click on Real-time protection and check all the boxes and save.

    Go to the Settings Tab and click on SpyNet and click on Advanced and save. This is not at all dangerous to you and no information sent will be used by Microsoft to identify you even if some minor identification information is sent in terms of defining the
    infection, but it can sometimes help with new threats by initiating an immediate update to deal with the problem if it is in the SpyNet database (and it helps Microsoft update definitions to provide you and everyone else better protection).

    Go to the Settings Tab and click on Advanced and check the box for save Quarantine items and change it from one month to three months so you have more time to decide if you want to restore something.

    *************************************************************

    If that doesn't help, then there's a good chance you may be infected by malware. Please proceed as follows:

    First, try the following programs if you haven't as they may help. I recommend you download, install, update, and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/
    and then run a full Safety Scan from Microsoft:http://www.microsoft.com/security/default.aspx. These may or may not remove the infections, but will probably not repair
    any damage caused by them. Even if they or your current AV software seem to work or indicate you aren't infected, you shouldn't completely trust them and need to continue with the recommendations that follow (so it's up to you if you want to try them first
    or just skip over all of this and get the expert help you really need as described below).

    Properly and completely removing such infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I'd suggest the following anyway, so we may as well start there (you can ignore
    the above removal methods if you want as this is really the way to go, but it won't hurt to try them).

    Please follow these recommendations compliments of Stephen Boots - MVP:

    Start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and then select the
    support option for phone, chat or email (options will vary by Region)

    If you are in North America, you can call 866-727-2338 for free help from Microsoft for virus and spyware infections.

    In other regions not served by the link above, go here:http://Support.microsoft.com/securityand go to the “assisted support” or contact us menu.

    If that doesn't work or they can't help, try one of the following malware-removal forums compliments of PA Bear - MVP:

    I can recommend the expert assistance offered in these forums:http://spywarehammer.com/simplemachinesforum/index.php?board=10.0,http://www.spywarewarrior.com/viewforum.php?f=5,http://www.dslreports.com/forum/cleanup,http://www.bluetack.co.uk/forums/index.php,
    and http://aumha.net/viewforum.php?f=30

    **************************************************

    If none of the above helps, then open a support case describing the problem starting at:https://support.microsoftsecurityessentials.com/.

    I hope this helps.

    Good luck!

  • RELEVANCY SCORE 2.87

    DB:2.87:Mybook Essential Not Showing Up In Windows Explorer 78



    We have a MyBook Essential 2.0 TB External Hard Drive that will not show up in Windows Explorer. The computer recognizes the drive, as it does show up in Device Manager, but isn't shown in Windows Explorer. I've tried connecting the drive to 4 different computers, all with the same result. Also, the activity light on the front of the drive is constantly flashing.

    DB:2.87:Mybook Essential Not Showing Up In Windows Explorer 78


    Disk Management gives me a message saying Connecting to Virtual Disk Service....

    DLG recognizes it as a logical drive, but not a physical drive.

    Screenshot:

  • RELEVANCY SCORE 2.87

    DB:2.87:Trouble Installing Windows Essential Live 2011 Kb2434199 mz


    I am trying to install Windows Essential Live 2011 KB2434199 but I get an error saying that it can not be installed because I may have a different flavor of Windows. Why am I getting this error? What do I need to do to fix this?

    DB:2.87:Trouble Installing Windows Essential Live 2011 Kb2434199 mz

    Hi VickieCronin_1,
    Thank you for posting your query in the Microsoft Community Forums.
    The issue that you are facing is not very clear. It can be difficult when something that is important to you does not work as expected. It is pretty simple and we are here to help you fix the issue. We will work as a team and get this
    sorted out.

    Please answer these questions-
    1)Are you trying to install Microsoft Live Essentials or an update for Live Essentials?
    2) What is the exact KB article number?
    3) What is the exact error message?
    4) Do you get any error code as well?
    5) Have you made any changes on the computer prior to the issue?

    I would like more information regarding the issue.

    Do get back to us with the answers. We will be happy to help. We, at Microsoft strive towards excellence and provide our customers with the best support.

    Thanks.

  • RELEVANCY SCORE 2.87

    DB:2.87:What Programs Are Essential When Starting Up Windows p9


    After installing Updates (Server -pack 1+IE 9),my PC takes an age to boot up,well infact its my homepage.I,ve tried Google Chrome,re-installed IE8 but to no avail.
    I,m using Windows 7Ultimate and my internet provider,connection is stable...
    Thank You...

    DB:2.87:What Programs Are Essential When Starting Up Windows p9

    Hi bbriley
    Thanks for that detailed reply....it will help me later on,although I hope I don,t have to use it..lol.
    A few weeks ago,I got the dreaded "blue screen" with one of them so-called companies telling me I had umteen errors...lol.I cound,nt even boot up PC..Friend got it going,then soething happened with my Hard drive..think its all related to first problem....
    Anyway,my pal took it away and done his magic-he found loads of malware etc....Cleaned everything up...and now its fast on start-up...
    Just a word of waring to others....Don,t be fooled with these scams,telling you your PC is infected and then paying them to completly wreck your system.
    Thanks again to all who took the time to reply...:)

    Cheers....

  • RELEVANCY SCORE 2.85

    DB:2.85:I Have Install Microsoft Security Essential In Windows Xp But It Is Given Error Code 0x80070643 Of Installing Time. So Please Help Me To Install It. 9j


    sir problem not solve

    DB:2.85:I Have Install Microsoft Security Essential In Windows Xp But It Is Given Error Code 0x80070643 Of Installing Time. So Please Help Me To Install It. 9j

    Please make sure that you are using Windows XP SP3 32Bit.
    For a list of help articles follow the links below:

    1.
    Check list for installing Microsoft Security Essentials
    2.
    Installation Error 0x80070643
    If all else fails contact MSE support:
    https://support.microsoftsecurityessentials.com/

    MVP [2010]| Consumer Security
    Visit me@Crimson Spectrum

  • RELEVANCY SCORE 2.84

    DB:2.84:0x80070643 Error Message In Installing Microsoft Security Essential Every Time Even After Windows Update.Please Help 7z


    After using .net clean up tool as suggested by u, the problem isn't fixed. Any how , I want to install Microsoft security essential. Please help

    DB:2.84:0x80070643 Error Message In Installing Microsoft Security Essential Every Time Even After Windows Update.Please Help 7z

    Hi Mokshhow,

    For information about what to do concerning that error, see the following thread:http://answers.microsoft.com/en-us/protect/forum/protect_start/installation-error-0x80070643/908fad3e-f9fc-4d8a-be83-ae7d3bc48db5.

    The following may also be useful, but mostly if using XP (though some of it may apply to other OS):

    http://answers.microsoft.com/en-us/protect/forum/protect_start/microsoft-security-essential-error-0x80070643/85460032-9fcb-4743-be6b-e703c1ee6794.

    ******************************************************************

    Here are general instructions for installing MSE if you get past that or if this helps you avoid that error:

    To re-install, check out this article and follow ALL the procedures:
    http://answers.microsoft.com/en-us/protect/forum/protect_start/check-list-for-installing-microsoft-security/bf757e6a-e320-4a67-92bc-767e6acb26c4 - but also check out the next paragraph before you begin the download.

    If you do or ever did have any other AV program installed on your computer (even if you didn't use it), you need to make sure they are all uninstalled and fully removed before you install. To fully remove them, check out this listing of removal toolshttp://social.answers.microsoft.com/Forums/en-US/msestart/thread/407bf6da-c05d-4546-8788-0aa4c25a1f91
    or the listing in that article at the bottom under troubleshooting steps (why this link isn't at the top near things to do first where it discusses removing all the prior and current AV programs is beyond me) or, if not on the lists, go to the website of the
    AV software and get and use the removal tool for that product. You cannot just uninstall these programs – you MUST also use the removal tool – even if the uninstall was years ago but you didn’t use a removal tool at the time.

    To install, go to
    http://www.microsoft.com/en-us/security_essentials/default.aspx and click on languages and locales at the bottom of the Download button and then choose your language and the appropriate version for your operating system. When you download, save it to the
    desktop (rather than running it). When finished, right click on the installation icon and click run as Administrator (even if you’re logged in as an administrator) as I’ve found this sometimes helps.

    Then you need to configure your settings, set a scheduled scan, enable real-time protection, update MSE, and then run a quick scan (or a full scan if you have time).

    I also recommend the following setup for MSE (though the decision is yours - I've just found this helpful and the most effective and best way to set it up and is how I have mine configured):

    Make sure that ALL threat levels are sent to Quarantine where you can then decide whether or not to allow them or leave them there, or remove them. It is the safest solution for having the most options for dealing with the situation. Quarantine is as safe
    as removed, but in some cases you may want to remove them to be more certain - and with this one I would remove it (when the time comes). To do this, open MSE, click on the Settings Tab, and for each of the threat levels, set the action to be Quarantine and
    save.

    Go to the History tab and click on allowed and unless you specifically placed something in allowed, remove everything else from the allowed category. Only put things there that you ABSOLUTELY know are not problems (are "false positives") and triple-check
    before you do it as doing this could allow a real threat to bypass security and infect you and it won't be detected or rather won't be reported or acted upon by MSE.

    Go to the Settings Tab and click on Real-time protection and check all the boxes and save.

    Go to the Settings Tab and click on SpyNet and click on Advanced and save. This is not at all dangerous to you and no information sent will be used by Microsoft to identify you even if some minor identification information is sent in terms of defining the
    infection, but it can sometimes help with new threats by initiating an immediate update to deal with the problem if it is in the SpyNet database (and it helps Microsoft update definitions to provide you and everyone else better protection).

    Go to the Settings Tab and click on Advanced and check the box for save Quarantine items and change it from one month to three months so you have more time to decide if you want to restore something.

    *************************************************************

    If that doesn't help, then there's a good chance you may be infected by malware. Please proceed as follows:

    First, try the following programs if you haven't as they may help. I recommend you download, install, update, and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/
    and then run a full Safety Scan from Microsoft:http://www.microsoft.com/security/default.aspx. These may or may not remove the infections, but will probably not repair
    any damage caused by them. Even if they or your current AV software seem to work or indicate you aren't infected, you shouldn't completely trust them and need to continue with the recommendations that follow (so it's up to you if you want to try them first
    or just skip over all of this and get the expert help you really need as described below).

    Properly and completely removing such infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I'd suggest the following anyway, so we may as well start there (you can ignore
    the above removal methods if you want as this is really the way to go, but it won't hurt to try them).

    Please follow these recommendations compliments of Stephen Boots - MVP:

    Start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and then select the
    support option for phone, chat or email (options will vary by Region)

    If you are in North America, you can call 866-727-2338 for free help from Microsoft for virus and spyware infections.

    In other regions not served by the link above, go here:http://Support.microsoft.com/securityand go to the “assisted support” or contact us menu.

    If that doesn't work or they can't help, try one of the following malware-removal forums compliments of PA Bear - MVP:

    I can recommend the expert assistance offered in these forums:http://spywarehammer.com/simplemachinesforum/index.php?board=10.0,http://www.spywarewarrior.com/viewforum.php?f=5,http://www.dslreports.com/forum/cleanup,http://www.bluetack.co.uk/forums/index.php,
    and http://aumha.net/viewforum.php?f=30

    **************************************************

    Ifnone of the abovehelps, then open a support case describing the problem starting at:https://support.microsoftsecurityessentials.com/.

    I hope this helps.

    Good luck!

  • RELEVANCY SCORE 2.84

    DB:2.84:Mail App Has Disappeared After Getting 8.1 xp


    After installing windows 8.1, many of the apps on my start screen appear to have been removed. Most of them are not essential, however the mail app IS essential, and i would like it back!!

    DB:2.84:Mail App Has Disappeared After Getting 8.1 xp

    Hi Alan,

    If you have different user account, please login to it and check the functionality. If you don't have different user account, let's create a new user account and check if the issue persists there.

    Refer to the suggestions from this link:
    http://windows.microsoft.com/en-in/windows/create-user-account#create-user-account=windows-8

    Hope this helps.

  • RELEVANCY SCORE 2.83

    DB:2.83:Windows Essential Does Not Work After Downloading. 13


    Dear all, I wish to seek help and answer from Microsoft Community. I have downloaded Windows Essentials 2012 from Microsoft's website. However, it does not work after installing. A notification saying that Click 'close' to start Windows Essentials. However,
    it doesn't start at all after doing so. I hope that I will have a solution to this. Thank You.

    DB:2.83:Windows Essential Does Not Work After Downloading. 13

    Hi Calvin,

    Thanks for posting. I undestand that your Windows Essentials does not work after installing. To further isolate the issue, I would like to ask if this happens to all of the programs under Windows Essentials. Also, I would like to ask for a screenshot of
    the exact error message you are receiving. You can get the screenshot by following the steps depending on your operating system (Windows

    XP/
    Vista/
    7/
    8). You can upload it when you reply here by clicking the thumbnail icon parallel to the formatting tools.

    We'll wait for it.

    Regards,
    Richard

  • RELEVANCY SCORE 2.82

    DB:2.82:Mybook Essential How To Just Backup ad



    After installing Smartware the WD Essential ran for 2 days categorising my files. Now whenever I start my PC it starts categorising them again. All I want to do is backup what's on my PC as is. How do you get it to do just that and only that? Harry_W

    DB:2.82:Mybook Essential How To Just Backup ad


    If the software never ran from the get go, you mayhave a busted install. Unless you have system issues,it should be ready-to-run, right off the bat. Ideally, that's what a hardware/software combination device should do.To avoid insanity, you gotta install the latest .NET Frameworks (4.0)and Windows updates, before attempting toremove the software. After uninstalling the backup software, download the latest versionand reinstall.

    http://www.wdc.com/wdproducts/wdsmartwareupdate/wd​smartware.asp?id=wdfMP30_SEEssentialos=win

  • RELEVANCY SCORE 2.82

    DB:2.82:Jabber Crashing Constantly. Windows 1f



    Constant Crashes.V 9.1.3 Build 13181. Report Error is attached. Wondering if anyone has experienced the same thing? Ive pretty much uninstalled all Third party software minus some essential ones I need.

    DB:2.82:Jabber Crashing Constantly. Windows 1f


    Hi,

    This is a known crash caused by voicemail service. Fix will be available in 9.2 release (expected at the end of March).

    CSCue35543: Jabber for Windows Crash - VoicemailService

    Thanks,

    Maqsood

  • RELEVANCY SCORE 2.82

    DB:2.82:Problem With Office 2010 And Messenger Essential Live 2012. zm


    Hi, I have problem with office 2010 and Windows Essential Live 2012.
    After update Windows Essential Live , MS word not respone document after auto save. (document is freeze)

    DB:2.82:Problem With Office 2010 And Messenger Essential Live 2012. zm

    Do you face this issue in all the Word documents or in a particular document?
    Do you face similar issues in any Office application other than Word?

    If it happens in all the Word documents, open Word in safe mode and check the status.
    a. On the keyboard, press the
    Windows key + R.
    b. Type winword /safe in the Open box, and then hit
    OK.

    If it works fine in safe mode, then disable the add-ins and check if it works fine in normal mode.
    a. In Word, click on File, and then click on
    Options.
    b. Click on Add-Ins, then select
    Manage - COM Add-ins at the bottom, and click on Go.
    c. Uncheck all the listed add-ins and click on
    OK. Then close and restart Word normally.

  • RELEVANCY SCORE 2.81

    DB:2.81:Svchost.Exe Cpu Running At 50 Constantly 99


    My SVCHOST.EXE on my Task Manager is running at 50% CPU Usage constantly. I have tried ending all the non-essential services and this still hasn't lowered the usage at all! I am using Windows XP. Can anyone help?

    Cheers.

    DB:2.81:Svchost.Exe Cpu Running At 50 Constantly 99

    Hi Jexup,

    SVCHOST can hog your CPU for many reason however sometimes it's a simple problem with Microsoft Update.

    Try following the steps in the following tutorial to see if it resolves your issue and if so please confirm.

    http://www.proposedsolution.com/solutions/svchostexe-99-cpu/

    Hope this helps.

    R.

  • RELEVANCY SCORE 2.81

    DB:2.81:About Windows Mail 99


    i am not able to find windows live mail icon after installing windows live essential 2011

    DB:2.81:About Windows Mail 99

    Hi,

    To best address your issue, please post your concern to this link below.

    Microsoft Answers

    Thanks.

  • RELEVANCY SCORE 2.81

    DB:2.81:My Windows Is Constantly Crashing Showing Blue Screen Errors dd


    recently i have had serious problems with my windows 7 pc. After one thing or another it crashes and restarts showing blue screen errors.
    It is constantly happening while installing avast antivirus software, panda global protection(error was no more ipr stack locations) or even while running some programs.

    DB:2.81:My Windows Is Constantly Crashing Showing Blue Screen Errors dd

    Hi,

    Method 1:
    I would suggest you to visit the manufacturers website and download and install all the updates and chipset drivers and video card drivers.

    Method 2:
    I would also suggest you to test the issue in safe mode and also try installing the drivers ina
    clean boot state..
    Step 1:
    Start your computer in safe mode
    http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    Step 2:
    Clean boot:
    This could be happening if any of the background programs is conflicting with the smooth running of your computer. To help troubleshoot error messages and other issues, you can start Windows 7 by using a minimal set of drivers and startup programs. This
    kind of startup is known as a "clean boot." A clean boot helps eliminate software conflicts.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.microsoft.com/kb/929135
    Note: After you have finished troubleshooting, follow step 7 in the article to boot the computer to normal startup.

  • RELEVANCY SCORE 2.80

    DB:2.80:Keep Receiving The Error Message 0x0000022, Installing Windows Live Essential 2012. c9


    Original title: 0X0000022
    I can install Windows live essential 2012 I keep receiving the error message 0x0000022. I would be very grateful if you could help me to sort it out.

    DB:2.80:Keep Receiving The Error Message 0x0000022, Installing Windows Live Essential 2012. c9

    Hi Maria Cristina,

    Are you able to install other programs without any issues?

    You may refer to the article and try the Fixit or steps provided for “Installing or updating programs in Windows may not have completed successfully” to fix the issue.
    How to troubleshoot problems when you install or uninstall programs on a Windows-based computer
    Note: The above mentioned article contains steps to perform clean boot in the section “Installing or updating programs in Windows may not have completed successfully”. If you choose the options, then you may refer to the step 6:”When
    you are finished troubleshooting the problem, restart the computer in Normal Startup mode” in the article to start the computer in Normal startup.

    If the issue persists, you need to get in touch with
    Windows Live support for further assistance.

    Hope the information helps.

  • RELEVANCY SCORE 2.80

    DB:2.80:I Am Constantly Getting A Message Saying I Have Problems With Bonjour Even After Re-Installing da


    I am constantly getting a message saying I have problems with Bonjour even after re-installing?

    DB:2.80:I Am Constantly Getting A Message Saying I Have Problems With Bonjour Even After Re-Installing da

    Hi JJSeymour,
    I would suggest posting your error messages on this site:
    http://www.apple.com/support/bonjour/
    Eddie B.

  • RELEVANCY SCORE 2.79

    DB:2.79:After Installing Microsoft Essential, Microsoft Security Still Reports Virus Protection Not Found 3s


    after installing Microsoft Essential, microsoft security still reports virus protection not found. Tried all the steps (ie deleting system32/wbem) but still same problem.

    DB:2.79:After Installing Microsoft Essential, Microsoft Security Still Reports Virus Protection Not Found 3s


    after installing Microsoft Essential, microsoft security still reports virus protection not found. Tried all the steps (ie deleting system32/wbem) but still same problem.

    What operating system and service pack?
    Prior Security Software?
    Any security software still installed?
    A possible reason for this problem is that you have conflicting security software installed fully or partially on the PC. Remove all other security software from the PC.
    You may need to use a cleanup tool to remove your prior security software:
    http://answers.microsoft.com/en-us/protect/forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-c05d-4546-8788-0aa4c25a1f91
    Be sure to review this post:
    Check list for installing Microsoft Security Essentials
    (also found here: http://experts.windows.com/w/experts_wiki/89.aspx)

    If that fails to resolve the problem, open an email support case:

    To open an email support case, start here:
    https://support.microsoftsecurityessentials.com/

    -steve

  • RELEVANCY SCORE 2.79

    DB:2.79:Panels Not Visible After Installing The Latest Cs6 Update From Cc 1c



    Hey guys,

    I installed the latest photoshop cs6 update from the cloud a few hours ago and after opening photoshop, no panel is visible! Even if I create a new canvas I got the error message that there is not enough memory to proceed.

    I mean the workspace panels "essential", "3d"... Im running photoshop on a windows 7 64bit machine. Can anyone help me please?

    DB:2.79:Panels Not Visible After Installing The Latest Cs6 Update From Cc 1c


    I did. And nothing changed, still the same issues after reinstall, no toolbar, no panels, nothing... Ive lost so much time with this update and even without it Im not able to run photoshop the way it was before. Could someone from the Adobe support team help please?

  • RELEVANCY SCORE 2.78

    DB:2.78:Installing Windows Essential Loads 66 Then Stops j1


    I have tried to install windows essentials it loads 66% stos message read going to return to 0 another program is stopping installationWhat is the problem?

    DB:2.78:Installing Windows Essential Loads 66 Then Stops j1

    You will find support for installing/uninstalling/updating/upgrading to Windows
    Live Essentials 2011 in this forum:
    http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec
    You will find support for Microsoft Security Essentials in these forums:
    http://answers.microsoft.com/en-us/protect/forum

  • RELEVANCY SCORE 2.77

    DB:2.77:Error Code0x80248014__ fc


    I'm getting this messege every time after installing windows 7: Microsoft security Essential couldn't install the defination updates. Please try later.

    DB:2.77:Error Code0x80248014__ fc

    Check your computer date and time. If you have other antimalware programs on your computer uninstalling them and running an uninstall/cleanup tool -

    http://social.answers.microsoft.com/Forums/en-US/msestart/thread/407bf6da-c05d-4546-8788-0aa4c25a1f91may resolve the problem. If you have no other antimalware programs on your computer or if uninstalling them does not resolve the update problem
    you can submit a support case here -
    https://support.microsoftsecurityessentials.com/
    Jim

    Microsoft MVP Consumer Security - Forum Moderator - Live One Care - Live Mesh - Microsoft Security Essentials

  • RELEVANCY SCORE 2.76

    DB:2.76:My Book Essential Problem 7j



    After my computer started backup last night, I woke up this morning and it said backup failed, and the blue light was flashing constantly. The WD WinDLG show its SMART status as ok, but doing a quick test it immediately gives the error

    "write sector error, check cables"

    When I unplugged it, and plugged it back in, it showed up in windows and I could access my files, but after a few minutes, it started making a contant clicking noise, but I could still access my files.

    Is this thing failing? Should I send it in for RMA?

    DB:2.76:My Book Essential Problem 7j


    If the drive is making a clicking or clunking noise that is not normal and can be a sign of a failing unit. The error that you received from DLG could be a bad cable or trouble communicating with the drive through your computers controller card. You can try changing the cable or testing the drive on another system. Also, if you are using Windows 7, you may get an error since DLG is not currently supported on Windows 7. If you are still having problems with the unit, then I would recommend replacing it through an RMA and see how the replacement unit works for you.




    If I helped you, please Kudo me

  • RELEVANCY SCORE 2.76

    DB:2.76:Not Installing Microsoft Securety Essential Error Code Ox80070643 zz


    not installing microsoft securety essential error code ox80070643

    DB:2.76:Not Installing Microsoft Securety Essential Error Code Ox80070643 zz

    Review this thread:
    http://social.answers.microsoft.com/Forums/en-US/msestart/thread/908fad3e-f9fc-4d8a-be83-ae7d3bc48db5
    And, verify that you have removedall other
    real-time antimalware products that were ever installed on your PC, including free/trial products that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malwarebytes (paid), etc). Then, use the cleanup tools here:
    List of anti-malware program cleanup/uninstall tools

    NOTE:If you have installed Adobe FLASH, and you already had the google toolbar, you were presented with the option to install “McAfee Security Scanner”, which is selected by default.If you were caught by this, and unknowingly/accidently
    installed McAfee, uninstall it and use the McAfee cleanup tool in the list above.

    Verify that your PC clock is correctly set.If not, correct it.
    Verify that Windows Defender is uninstalled (if XP), or Disabled (if Vista/W7).
    Verify that you are up-to-date with SERVICE PACKS and updates (including .NET).Yes, it can take some time to do this.

    If the problem persists, submit a support case to Microsoft:https://support.microsoftsecurityessentials.com/?scrx=1
    Doc

    Computers verified since 1972

  • RELEVANCY SCORE 2.76

    DB:2.76:Windows Update October. After Installing Cannot Download Security Updates Including Windows Security Essential Package On Pc Or Laptop 1c


    After returning from a 42 day break I've truned on my PC and Laptop and received the acrued updates. Now after installation I cannot donwload/install any security updates, including Microsofts Windows Essential Security package updates. Running IE9. massage
    at bottom says that the file is unsafe and cannot install

    DB:2.76:Windows Update October. After Installing Cannot Download Security Updates Including Windows Security Essential Package On Pc Or Laptop 1c

    IN RE both computers (since you insist):
    1. Did you (a) uninstall the Norton application AND THEN (b) download/run the Norton Removal Tool [1] reboot (c)
    BEFORE you installed MSE?
    2. On MSE's Update tab,what Definitions version is currently displayed (e.g., v1.117.1166.0)?
    3. Are ALL of the following updates currentlylisted in View installed updates?
    • KB2618444, KB2633171, KB2639417, KB2620712, KB2619339 KB2572077
    4. Which of the following is listed in View installed updates?
    • Security Update for Internet Explorer 8 for Windows 7 (KB2544521)

    or...
    • Windows Internet Explorer 9
    ==================================================================
    [1]
    ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  • RELEVANCY SCORE 2.75

    DB:2.75:How To Downgrade Firmware In My Passport Essential ??? m8



    I bought a My Passport Essential few days ago, after installing WDSmartware, it suggests me to upgrade WDSmartware and also Firmware, now every time I want to restart my laptop( Dell studio 1555), it is stuck upon Dell's logo appears till disconnect My Passport Essential !!!

    Beside, I need my laptop boot from external hard drive to install windows 7

    How to downgrade Firmware in My Passport Essential ???

  • RELEVANCY SCORE 2.75

    DB:2.75:Passport Essential Se Usb 3.0 750gb Spindown z9



    Just installed this on my windows 7 desktop. Working fine.

    I chose not to install any of the software that came with it. I have Acronis which I've used for years.

    Since there is no on/off switch, I just let it boot up with the desktop and let it turn itself off at shutdown.

    I would like to know if there is a way to have it spindown or sleep after a period of time. Right now, it's running constantly as long as the desktop is on and I don't wan't to keep plugging/unplugging the usb 3.0 cable.

    I read that there is an old wd app on their website that may do this, but i don't know if it works with win7 or with my passport.

    Thanks.

    DB:2.75:Passport Essential Se Usb 3.0 750gb Spindown z9


    Normally the drive goes to sleep mode if the computer does the same or if the drive is not being in use.

    If you want to control that, you will need to install the WD Smartware software and through the configuration of the drive you will see the options to set the sleep timer.




    Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue.

  • RELEVANCY SCORE 2.75

    DB:2.75:Mybook Essential 2tb Won't Go Idle Or Standby When Connected To Router 8f



    I've configured my MyBook Essential 2TB to go into standby after 10min, but when it's plugged into my Netgear ADSL router it always stays active. The LED light flashes constantly and I can hear the disk spinning even when it's not in use. Has anyone else had this problem? I'm using the MyBook as a network media drive for streaming to a WD TV Live, so it's important that it goes into standby when not in use.

    Cheers, Heidi

    DB:2.75:Mybook Essential 2tb Won't Go Idle Or Standby When Connected To Router 8f


    I had the same thing going on until I was told that these drives are not recommended to be used connected to a router and what I did is that I connected the drive to a USB port on my computer, connected my computer to the router and shared the USB drive on the network then I was able to play the files on the WD TV Live from the USB drive that was shared on the same network.




    Click the Kudos star to say thank you for helpful posts and 'Accept as Solution' under options for the post that solved your issue.

  • RELEVANCY SCORE 2.75

    DB:2.75:I Tunes Locks Up 9c


    It constantly locks up after installing last update with Windows 8

    DB:2.75:I Tunes Locks Up 9c

    It constantly locks up after installing last update with Windows 8

  • RELEVANCY SCORE 2.75

    DB:2.75:Wd My Passport Essential - Restarting Constantly ak



    I have this problem that sometimes when the external Hard Drive is under a read/write process it suddenly restarts; it happens whenever I try to access the HD or the files in it, not always, but often. However, when attempting to transfer files between it and another external drive, it will always restart.I have tried to find the source of the problem:
    USB Ports - I tried connecting to every port of my PC, the problem was still there.USB Cable - After thinking for a while, I thought the problem might be the cable not sending enough power to the HD so I tried with other types of USB wires that I previously owned, including a "Y" cable. None of them solved the issue.Formatting - I backed up everything I previously stored in the external drive to my local disk (currently my pc is saturated for this reason) and formatted it more than one time, the issue persisted.
    Seeing there wasn't another possibility, I assumed the HD had a hardware malfunction and decided to return it to the store, until I tested it on other computers. Surprisingly, it worked perfectly and handled large amounts of data transfers without problems, this is how I found out that the issue is only present on my system.I find this strange because other external hard drives (irrelevant to Western Digital) were working fine on my computer; so long My Passport Essential is the only storage device giving me problems.As additional information:

    I'm using Windows 7.The HD isn't using the provided software as it's mainly used for storage, but I saved it.Sometimes, the activity on another external disk also restarts My Passport Essential.

    DB:2.75:Wd My Passport Essential - Restarting Constantly ak


    I am having the same problem. Except,I am on a Navy Ship and very limited on resources as far as power and substitute cables or anything else for that matter. My 500Gb drive connects and disconnects every 5 minutes or so pretty much every time I use it. I have no way to connect my non-government computer to the internet, and i can't stop the boat from moving from side to side constantly. I didn't expect a portable drive to be so sensitive. Any help would be appreciated. I tried uninstalling the driver and re-installing and the problem persists.

  • RELEVANCY SCORE 2.74

    DB:2.74:Machine Takes 3 Minutes Extra After Installing Ms Security Essential 87


    Hello,
    I have installed MS Security Essential and my machine start up has become extremely slow. It even had a memory error once, the blue screen with error and had to start in safe mode. I uninstalled it and it started working normally.
    I have Windows 7 64 bit JapaneseOS. The machine is new and comes with McAFee preinstalled. I even tried disabling McAFee but the problem did not go. I installed it again however with the same problem.
    Please help me. Your help will be heartily appreciated.
    Regards,
    Amit Parmar.

    DB:2.74:Machine Takes 3 Minutes Extra After Installing Ms Security Essential 87

    You MUST remove McAfee and use the McAfee cleanup tool...
    Verify that you have removed all other real-time antimalware products that were ever installed on your PC, including free/trial product that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, etc). Use the removal tools
    here:
    List of anti-malware program cleanup/uninstall tools

    If you just updated Adobe Flash, you may have inadvertently installed McAfee Security Scanner.Verify that it is not present.
    Verify that Windows Defender is uninstalled (if XP), or Disabled (if Vista/W7).
    Verify that you are up-to-date with patches and service packs.
    Verify that your PC clock is correctly set.
    Verify that you are using build 1961 of MSE (as of April 2010).
    Verify that the Windows Firewall is on, and set to defaults.Remove Zone Alarm if you have it and use the Windows Firewall.
    Verify that you are not using a proxy server.
    In IE, reset all security zones to default level.

    Then, restart your PC.
    If the problem persists, submit a support case to Microsoft:https://support.microsoftsecurityessentials.com/?scrx=1
    Doc

  • RELEVANCY SCORE 2.74

    DB:2.74:How Do I Remove Windows Essential Completely pd


    I have problems with live messenger and live mail and when I remove all live essential in control panel and after rebooting andre-installing

    I get the same account with the same problems, how do I really get rid of live essential and start from fresh.

    DB:2.74:How Do I Remove Windows Essential Completely pd

    Hi Rohit,

    Sorry if I was not clear.
    I have problems with my windows live mail , first I get messages on the lower right side that I

    have over 400 unread messages , when I click on it it takes me to my e-mail with only 2 or 3

    unread messages, but the worst it freezes on receiving e-mail , most of the time it will

    be fine if I reboot but only for one time and then freezes again on receiving mail.

    So I decided to completely remove live mail and re-download it , but when I do re-install

    live mail I automatically get the same mail account with the same problem , a friend told me

    I have to cancel my full ( messenger+mail ) microsoftlive mail account to start anew.

    Claude

  • RELEVANCY SCORE 2.74

    DB:2.74:Windows Not Activated On Lenovo B590. d9


    I bought lenovo b590 essential laptop, and it constantly tells me that windows isn't activated. I pressed the error information and it shows me 0xC004C008 error code.

    DB:2.74:Windows Not Activated On Lenovo B590. d9

    hisid3ffect,

    Welcome to the Lenovo Forums.

    Just to check:
    1.Is this a new system (less than 30days) without any hardware changes (eg. HDD was upgraded)?
    2. Was the unit serviced before (eg. Motherboard was replaced) ?
    3. Have you tried activating by phone?

    Activate Windows 8 by Phone
    How to Activate Windows 7 by Phone

    4.If the unit comes with a preloaded copy of Windows, can you press the Windows key+R and typeslmgr /dlv(this is to check if Windows is reading the license key properly) and post the results here.

    Let me know how it goes.

    Regards



    Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

  • RELEVANCY SCORE 2.74

    DB:2.74:Problems After Installing Microsoft Windows Essential, Computer Stops Performing Then It Turns Off. ka


    When I installed the microsoft windows essentials, i have another antivirus program. so after the MSI finished its installation, my computer stops performing then it turns off. after that i cant open my computer. what can I do to oppen again my windows?
    when I open my computer (netbook) it says that --

    DB:2.74:Problems After Installing Microsoft Windows Essential, Computer Stops Performing Then It Turns Off. ka

    Hi Melissa,
    Please take a look at the article
    What are the system recovery options in Windows7? for some troubleshooting steps.
    Hope this helps!

  • RELEVANCY SCORE 2.74

    DB:2.74:Error Code 0x80070645 When Installing Mse f1


    non riesco ad installare Microsoft Security essential.
    mi appare sempre il codice errore in titolo.

    DB:2.74:Error Code 0x80070645 When Installing Mse f1

    Esegui il Microsoft Fix it:
    "Error: 0x80070645 appears when you try to upgrade Microsoft Security Essentials."

    Leggi e segui:
    Non riesco a installare Microsoft Security Essentials

    Se non risolvi...

    Il computer è infettato da malware, come
    devo procedere?
    Segui attentamente i primi 4 Passi indicati nel post.

    Microsoft Security Essentials Support Team
    Se non risolvi è possibileInviare un caso di assistenza, feedback, suggerimenti e commentiin linea al Team di Supporto tecnico di
    Microsoft Security Essentials.

    Saluti.

  • RELEVANCY SCORE 2.73

    DB:2.73:Continuous Reboot After Installing Microsoft Security Essential 3p


    My system is Windows XP professional.

    After installed Microsoft Security Essential, reboot the system as requested, but keep rebooting and can't star the computer. I log into safe mode and restore to the

    previous system and the system work fine. Any solution?

    DB:2.73:Continuous Reboot After Installing Microsoft Security Essential 3p

    Make sure that you run the McAfee uninstall tool.
    Try re-installing MSE.

  • RELEVANCY SCORE 2.73

    DB:2.73:My Passport Essential Cannot Be Unlocked After Installing Universal Shield 4.5 8m



    Hi,

    Afterinstalling Universal Shield4.5 (a security software, referring to http://www.everstrike.com/shield.htm), My Passport Essential cannot be unlocked.

    When I connect My Passport tothe computer and enter the current password, the external drive letter doesn't appear (just WD virtual CDcan be found).

    Please help me out with this problem. Thank you.

    DB:2.73:My Passport Essential Cannot Be Unlocked After Installing Universal Shield 4.5 8m


    Hi,

    Thank you for your reply.

    I've reported this problem to both WDC and the software developer.

    (WDC has no response; the software developer is trying to solve)

    After I unistall the software, My Passport can works as usual.

    However, if possible, I'd like to use bothon the same system.

  • RELEVANCY SCORE 2.73

    DB:2.73:Error Showing While Turning On Windows Essential zx


    I have a 2year windows essential security in my laptop now. But after the windows new update it automatically turned off and while turning on the software, it shows error occurred.

    DB:2.73:Error Showing While Turning On Windows Essential zx

    Have you completed all updates on your system? I had the same issue but was resolved when all the updates to the system were installed, not just for the Windows Security Essential. If you have done all updates and your still getting this error, there is
    support for this issue.
    Best Regards,
    smallwonder703

  • RELEVANCY SCORE 2.72

    DB:2.72:Installing Security Essentials Removed Security Center. I Can Not Turn On The Firewall. Using Vista Sp2. How Did I Get Ms Firewall To Run 8j


    I am using Vista SP2 with automatic updating. I downloaded security essential for the virus protection. It somehow uninstalled Security Center. I can not start Security Center, Firewall, or Defender. I tried pausing Windows Management Instrumentation
    (WMI) and deleting C:\Windows|System32\webm\repository, resumed WMI. Repository rebuilt, but Security Center is still missing even after reboot. Is Security Essential meant to run with Security Center firewall?

    DB:2.72:Installing Security Essentials Removed Security Center. I Can Not Turn On The Firewall. Using Vista Sp2. How Did I Get Ms Firewall To Run 8j

    MSE will disable Windows Defender on Vista, but it does not disable *Windows* Security Center and it confirms that the Windows Firewall is enabled.
    It does not disable access to the Windows Security Center.
    Prior Security Software?
    Any security software still installed?
    A possible reason for this problem is that you have conflicting security software installed fully or partially on the PC. Remove all other security software from the PC.
    You may need to use a cleanup tool to remove your prior security software:
    http://answers.microsoft.com/en-us/protect/forum/protect_start/list-of-anti-malware-program-cleanupuninstall/407bf6da-c05d-4546-8788-0aa4c25a1f91
    Be sure to review this post:
    Check list for installing Microsoft Security Essentials
    (also found here: http://experts.windows.com/w/experts_wiki/89.aspx)

    If that fails to resolve the problem, open an email support case:

    To open an email support case, start here:
    https://support.microsoftsecurityessentials.com/

    -steve

  • RELEVANCY SCORE 2.71

    DB:2.71:Can The Product Key Reuse? d3


    recently I send my netbook to a computer shop to format my windows 7 starter.. When I claimed my netbook, I was shock to see my windows is still unactivate.when I told them they activate it for me but after installing Microsoft Security Essential,
    it says it's not genuine.I would like to ask if my old windows 7 starter product can be use back to activate my windows?
    After formating the windows is still windows 7 starter.

    DB:2.71:Can The Product Key Reuse? d3

    No reply from the Original Poster.
    Issue is assumed to be resolved.Darin MS

  • RELEVANCY SCORE 2.71

    DB:2.71:Problem At Installing Windows Live Essential x7


    When I try to install Windows live Essentials, everything runs orderly, but at the an error 0x8104000b appears. I have W7 Home premium, hardware is sufficient. Please, advice me, how to install it.
    Thanks. Honza

    DB:2.71:Problem At Installing Windows Live Essential x7

    This thread is almost 4 years old which is probably why the link doesn't work.
    Try posting here.

    http://answers.microsoft.com/en-us/windowslive/forum?sort=lastreplydatedir=desctab=Threadsstatus=mod=modAge=advFil=postedAfter=postedBefore=threadType=Alltm=1401709908650

  • RELEVANCY SCORE 2.71

    DB:2.71:Printer Keeps Disappearing Constantly 73


    Hello,

    After installing my printer, after a few moments or a few days (i.e. after a while), the printer disappears. I've used the Add A Device file from HP multiple times. Printer reinstalls and works untilthe printer disappears. Is there a solution to fix the
    constant disappearance?

    PS Printer is HP OfficeJet J6450

    DB:2.71:Printer Keeps Disappearing Constantly 73

    Hi,

    Do youhave any external devices connected to the computer?

    It looks like we do not have much information regarding the
    compatibility of the printer in Windows compatibility center.

    I would suggest you to run the Printer troubleshooters provided here and check with the issue.

    Fix Common Problems Using HP Diagnostic Tools
    for Windows

    If the issue still persists, you may have to completely uninstall the printer and reinstall from the HP website.

    I would also suggest you to post the query in HP support forums for more information.

    http://www8.hp.com/ca/en/supportforums.html

    Hope this information helps. Reply with the status so that we could help you further.

  • RELEVANCY SCORE 2.71

    DB:2.71:Installing 68 Importantt Vista Updates Is Stuck On Update 59 Live Essential Update fs


    I am installing 68Important updates on my Vista Toshiba Satellite.
    SCREEN-1: The updateInstallation Processis stuck at update 59 of 68.....Windows Live Essentials 2011 (KB2434419)

    SCREEN-2: The Windows Live Essential Installation, is also indicated on a separateSCREEN - and I requested only installing updates to existing features of Live Essential on this PC

    SCREEN-2:
    The Window Live Essential update (59) failed, and Irequested TRY Installing it again (on the Live Essential Installation screen), but again it got stuck at 51% and I Cancelled the Installation on this screen.
    The Windows LIVE ESSENTIAL update screen, indicated that "Please Wait while we put everything backthe way found it".
    After a while the "Windows Live Essential" installation screen disappeared.
    SCREEN-1:
    But the main "Windows Update" screen is still indicating "Installing Update 59 of 68.......Windows Live Essentials 2011 (KB2434419)

    It seemed to be stuck in this state
    Then I pressed "Stop Installation"
    The "Stop Installation" indicated is dampened, but the screen is still stuck with "Installing Update 59 of 68...Windows Live Essential 2011 (KB2434419)"

    What should I do?
    I am scared of restarting the computer, just in case it will get stuck in a Never..Never land.

    Only a few days ago I restored this PC to Facory Installed Recovery Software.
    The computer has been working fine.
    And now this Update state

    I would appreciate your help.

    Thanks...... Sucha

    DB:2.71:Installing 68 Importantt Vista Updates Is Stuck On Update 59 Live Essential Update fs

    I am installing 68Important updates on my Vista Toshiba Satellite.
    SCREEN-1: The updateInstallation Processis stuck at update 59 of 68.....Windows Live Essentials 2011 (KB2434419)

    SCREEN-2: The Windows Live Essential Installation, is also indicated on a separateSCREEN - and I requested only installing updates to existing features of Live Essential on this PC

    SCREEN-2:
    The Window Live Essential update (59) failed, and Irequested TRY Installing it again (on the Live Essential Installation screen), but again it got stuck at 51% and I Cancelled the Installation on this screen.
    The Windows LIVE ESSENTIAL update screen, indicated that "Please Wait while we put everything backthe way found it".
    After a while the "Windows Live Essential" installation screen disappeared.
    SCREEN-1:
    But the main "Windows Update" screen is still indicating "Installing Update 59 of 68.......Windows Live Essentials 2011 (KB2434419)

    It seemed to be stuck in this state
    Then I pressed "Stop Installation"
    The "Stop Installation" indicated is dampened, but the screen is still stuck with "Installing Update 59 of 68...Windows Live Essential 2011 (KB2434419)"

    What should I do?
    I am scared of restarting the computer, just in case it will get stuck in a Never..Never land.

    Only a few days ago I restored this PC to Facory Installed Recovery Software.
    The computer has been working fine.
    And now this Update state

    I would appreciate your help.

    Thanks...... Sucha

  • RELEVANCY SCORE 2.71

    DB:2.71:Acer 5755g Hdd Led Blinking Constantly km



    hi recently after installing new windows 8 on my laptop,acer5755g,hdd and optical drive led blinking constantly.after unistalling pioner disk drive from device manager its fixed but thats not a good soulution,plz help me.







    Solved!
    Go to Solution.

    DB:2.71:Acer 5755g Hdd Led Blinking Constantly km


    The real solution is at the moment:

    http://superuser.com/questions/229546/why-does-my-hard-drive-led-light-blink-every-second

    disable the "Broadcom Card Reader Service": in Services go to its properties, stop it and change its startup type to "disabled". The blinking will finally stop.

    The reason for blinking is immensely bad programming of that service by Broadcom.

  • RELEVANCY SCORE 2.71

    DB:2.71:After Installing Ms Essentials Do I Need To Install Norton sf


    IS THERE ANY NEED OF INSTALLING NORTON AFTER INSTALLING MS ESSENTIAL

    NAWABDERA

    DB:2.71:After Installing Ms Essentials Do I Need To Install Norton sf

    No, you should not install Norton after installing MSE. Having more than one antivirus program on a computer can cause conflicts, system instability and performance issues.
    Jim

    Microsoft MVP Consumer Security - Forum Moderator - Live One Care - Live Mesh - Microsoft Security Essentials

  • RELEVANCY SCORE 2.70

    DB:2.70:Frustrating Error cc


    After installing Media Player addon. The service crss.exe feels it necessary to constantly pop up a Windows - No Disk Error0xc00000 13 paramaters 0x7630946c 0x7630946c 0x7630946c.Help!

    DB:2.70:Frustrating Error cc

    Did you install the User Desktop Experience or an addon for Windows Media Player already installed?

  • RELEVANCY SCORE 2.70

    DB:2.70:Windows Live Essential 11 Kb2434419 Stopped After 50 8a


    Had a Windows Update to check on and after 50% was downloaded it stopped. Went away from PC for 1 hr and still stopped. Windows Live Essential 2011 KB2434419. Another windows live essential downloaded ok but not this number KB2434419.
    Thank you

    DB:2.70:Windows Live Essential 11 Kb2434419 Stopped After 50 8a

    Last night I spent about 6 to 8 hours and Windows Live Essentials 2011 did not go through. Today I used how to uninsall windows live essentials link and the live essenials update went through in 10 to 15 minutes. Thanks.

  • RELEVANCY SCORE 2.70

    DB:2.70:Installing Upgrades j9


    Nearly always fail to install Windows Live Essential 2011 (KB2434419). Have Windows Vista.

    Any advice please

    DB:2.70:Installing Upgrades j9

    You will find support for installing/uninstalling/upgrading Windows Live Essentials in this forum:

    http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

    Note: KB2434419 has been a mandatory upgrade since mid-June 2012!

    TIP: Chances are one or more of your Windows Live Essentials applications, not Windows Update, prompted you to
    upgrade (not update) to Windows Live Essentials 2011 QFE3 (v15.4.3555.0308).

    TIP: If you're in the injudicious habit of using "Registry cleaners" [1] and you do NOT have backups of ALL the changes they've EVER made, chances are your only recourse will be a clean install of
    Windows Vista (not Windows Live Essentials).

    ===================================================================
    [1] e.g., Registry Mechanic; System Mechanic; RegCure; RegClean Pro; Advanced SystemCare; Registry Booster; McAfee QuickClean; AVG PC TuneUp; Norton Registry Cleaner; PCTools Optimiser; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo
    System Cleaner; Advanced System Optimizer; CCleaner's Registry Cleaner

  • RELEVANCY SCORE 2.70

    DB:2.70:Computer Slow - My Passport Essential Se dd



    Just installed My Passport Essential SE and noticed a slowdown in performance. It takes longer to launch apps, launch webpages, etc. Even after I power off and remove the drive, system is slow. I am running Windows 7 Professional OS. Any ideas? Thanks!

    DB:2.70:Computer Slow - My Passport Essential Se dd


    In certain PC’s antivirus programs create unnecessary resources hog when WD Passport drives (with VCD) connected. I use same drive with Avira free but I don’t have any issue. But I am running with VCD disabled. Temporary uninstall Norton Avira or any other AV and see if performance change. Or you could hide VCD if you don’t use password drive lock.

    Launch Task manager and see which app is using more CPU time.




    Mabikay - SLKNote: Click the Kudos star to say thank you for helpful posts. And click the 'Accept as Solution' button for the post that solved your issue.

  • RELEVANCY SCORE 2.70

    DB:2.70:Can Ms Security Essential And Macfee Virus Software Both Installed On The Same Computer At The Same Time c8


    Can MS Security Essential and Macfee Virus Software both installed on the same computer at the same time?

    Do I have have remove Mcafee after installing MS Security Essential?

  • RELEVANCY SCORE 2.70

    DB:2.70:Windows Xp Crash p7


    I have just purchashed an eMachines Netbook Mini. It came with windows 7 starter which I did not like and wanted xp. After installing xp then I install Intel chipset drivers and the xp crashes constantly rebooting and I can't go in safe mode.I have an Intel Atom processor.

    DB:2.70:Windows Xp Crash p7

    I have just purchashed an eMachines Netbook Mini. It came with windows 7 starter which I did not like and wanted xp. After installing xp then I install Intel chipset drivers and the xp crashes constantly rebooting and I can't go in safe mode.I have an Intel Atom processor.

  • RELEVANCY SCORE 2.70

    DB:2.70:Security Essential Not Opening On Windows 7 64 Bit p7


    after completing 1 yearlicense version of mc afee, installed windows security essential .After installing itit is not opening and no error is given by it.

    DB:2.70:Security Essential Not Opening On Windows 7 64 Bit p7

    Hi vijay,

    Let's start over and make sure everything is done correctly.

    Start with the following compliments of Dr. Strangelove:

    Verify that you have removed all other real-time antimalware products that were ever installed on your PC, including free/trial products that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malwarebytes (paid), etc).
    Then, use the cleanup tools here: List of anti-malware program cleanup/uninstall tools.
    You MUST use the cleanup/removal tools to get rid of these programs properly as the normal uninstall process leaves remnants behind that cause problems with any other AV product you install later including MSE. Especially be sure you uninstalled McAfee and
    used the McAfee Removal Tool as well:
    http://service.mcafee.com/FAQDocument.aspx?id=TS100507.

    NOTE: If you have installed Adobe FLASH, and you already had the Google toolbar, you were presented with the option to install “McAfee Security Scanner”, which is selected by default. If you were caught by this, and unknowingly/accidentally
    installed McAfee, uninstall it and use the McAfee cleanup tool in the list above. Other programs "package" deals like this as well with this or other products and if you've recently done a clean install (a restore to factory conditions) you may have also re-installed
    trial software that you long since forgot was there.

    Verify that your PC clock is correctly set. If not, correct it. If it is wrong, you may also want to either synchronize with a different internet time server or replace your CMOS battery (which keeps the clock running when you turn off the
    PC and like any battery can eventually run down).

    Verify that Windows Defender is uninstalled (if XP), or Disabled (if Vista/W7).

    Verify that you are up-to-date with SERVICE PACKS and updates (including .NET and IE). Yes, it can take some time to do this.

    Then, restart your PC.

    If that doesn't work, try the following:

    Try a clean boot (Vista and W7)
    http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit causing the problem. Follow the procedures in the article. Once found, delete, remove, deactivate, or uninstall it. Once done be sure to
    reset your system back to normal status as explained in the procedures. If the problem occurs in clean mode then just restore the system to normal status and reboot - this solution is not going to work. If using XP, see
    http://support.microsoft.com/kb/310353 and
    http://support.microsoft.com/kb/316434.

    If that doesn't work, uninstall and re-install MSE. To uninstall MSE, proceed as follows:

    http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4.

    To re-install, check out this article and follow ALL the procedures:
    http://answers.microsoft.com/en-us/protect/forum/protect_start/check-list-for-installing-microsoft-security/bf757e6a-e320-4a67-92bc-767e6acb26c4 - but also check out the next paragraph before you begin the download.

    If you do or ever did have any other AV program installed on your computer (even if you didn't use it), you need to make sure they are all uninstalled and fully removed before you install. To fully remove them, check out this listing of removal toolshttp://social.answers.microsoft.com/Forums/en-US/msestart/thread/407bf6da-c05d-4546-8788-0aa4c25a1f91
    or the listing in that article at the bottom under troubleshooting steps (why this link isn't at the top near things to do first where it discusses removing all the prior and current AV programs is beyond me) or, if not on the lists, go to the website of the
    AV software and get and use the removal tool for that product. You cannot just uninstall these programs – you MUST also use the removal tool – even if the uninstall was years ago but you didn’t use a removal tool at the time.

    To install, go to
    http://www.microsoft.com/en-us/security_essentials/default.aspx and click on languages and locales at the bottom of the Download button and then choose your language and the appropriate version for your operating system. When you download, save it to the
    desktop (rather than running it). When finished, right click on the installation icon and click run as Administrator (even if you’re logged in as an administrator) as I’ve found this sometimes helps.

    Then you need to configure your settings, set a scheduled scan, enable real-time protection, update MSE, and then run a quick scan (or a full scan if you have time).

    I also recommend the following setup for MSE (though the decision is yours - I've just found this helpful and the most effective and best way to set it up and is how I have mine configured):

    Make sure that ALL threat levels are sent to Quarantine where you can then decide whether or not to allow them or leave them there, or remove them. It is the safest solution for having the most options for dealing with the situation. Quarantine is as safe
    as removed, but in some cases you may want to remove them to be more certain - and with this one I would remove it (when the time comes). To do this, open MSE, click on the Settings Tab, and for each of the threat levels, set the action to be Quarantine and
    save.

    Go to the History tab and click on allowed and unless you specifically placed something in allowed, remove everything else from the allowed category. Only put things there that you ABSOLUTELY know are not problems (are "false positives") and triple-check
    before you do it as doing this could allow a real threat to bypass security and infect you and it won't be detected or rather won't be reported or acted upon by MSE.

    Go to the Settings Tab and click on Real-time protection and check all the boxes and save.

    Go to the Settings Tab and click on SpyNet and click on Advanced and save. This is not at all dangerous to you and no information sent will be used by Microsoft to identify you even if some minor identification information is sent in terms of defining the
    infection, but it can sometimes help with new threats by initiating an immediate update to deal with the problem if it is in the SpyNet database (and it helps Microsoft update definitions to provide you and everyone else better protection).

    Go to the Settings Tab and click on Advanced and check the box for save Quarantine items and change it from one month to three months so you have more time to decide if you want to restore something.

    *************************************************************

    If that doesn't help, then there's a good chance you may be infected by malware. Please proceed as follows:

    First, try the following programs if you haven't as they may help. I recommend you download, install, update, and run full scans with Malwarebytes:http://www.malwarebytes.org/ and SuperAntiSpyware:http://superantispyware.com/
    and then run a full ESET online scan:
    http://www.eset.com/us/online-scanner. This may or may not remove the infections, but will probably not repair any damage caused by them. Even if they or your current AV software seem to work or indicate you aren't infected or the problem goes away, you
    shouldn't completely trust them and need to continue with the recommendations that follow (so it's up to you if you want to try them first or just skip over all of this and get the expert help you really need as described below).

    Properly and completely removing such infections can be complex and often require manual removal procedures (which may or may not be entirely effective either). Even if they work, I'd suggest the following anyway, so we may as well start there (you can ignore
    the above removal methods if you want as this is really the way to go, but it won't hurt to try them).

    Please follow these recommendations compliments of Stephen Boots - MVP:

    Start here - https://support.microsoftsecurityessentials.com/ and select the link that says - I think my computer is infected - and then select the
    support option for phone, chat or email (options will vary by Region)

    If you are in North America, you can call 866-727-2338 for free help from Microsoft for virus and spyware infections.

    In other regions not served by the link above, go here:http://Support.microsoft.com/securityand go to the “assisted support” or contact us menu.

    If that doesn't work or they can't help, try one of the following malware-removal forums compliments of PA Bear - MVP:

    I can recommend the expert assistance offered in these forums:http://spywarehammer.com/simplemachinesforum/index.php?board=10.0,http://www.spywarewarrior.com/viewforum.php?f=5,http://www.dslreports.com/forum/cleanup,http://www.bluetack.co.uk/forums/index.php,
    and http://aumha.net/viewforum.php?f=30

    ********************************************************************

    If you were infected by malware, after the system is cleaned you need to once again uninstall and re-install MSE as it is not good to install it on an infected machine which may cause problems or affect the performance of MSE in the future.

    Hopefully, one of these solutions (or a step in one of these answers) will resolve the problem. If not, then open a support case describing the problem starting at:https://support.microsoftsecurityessentials.com/.

    I hope this helps.

    Good luck!

  • RELEVANCY SCORE 2.69

    DB:2.69:Cant Update Microsoft Essential Security After Installed It xp


    after installing microsoft essential security on my laptop i can't updated, but i have intenet access

    DB:2.69:Cant Update Microsoft Essential Security After Installed It xp

    Hi Romelotoke,

    Thank you for posting your query in Microsoft Community Forums.

    From the issue description, I understand that you are unable to update Microsoft Security Essentials (MSE) on Windows 7 computer.

    I understand it must be frustrating, but rest assured, we are here to help you and guide you in the right direction.

    I would really appreciate if you can help me with the following information.

    1. Do you receive any error message/code when you try to update MSE?
    2. Is this issue specific to MSE update? Are you able to install Windows updates successfully?

    The most common causes for update issues are problems with Internet connectivity. If you're online, then the issue might be caused by conflicts with your settings in Windows Internet Explorer.

    Let's start with some possible troubleshooting ideas and check if it helps.

    Method 1
    Verify that you have removed all other real-time antimalware products that were ever installed on your PC, including free/trial products that were installed when the PC was purchased (Norton, McAfee, TM, AVG, OneCare, Malware
    bytes (paid), etc).

    Note: If you use more than one antivirus or antispyware program at the same time, your PC may experience decreased performance, become unstable, or restart unexpectedly. Before you install Microsoft Security
    Essentials, or if you want to resolve issues with Microsoft Security Essentials, including updating issues, you must first completely remove any Internet security programs from your PC.

    Method 2
    Refer to the help link and check.
    Troubleshooting update issues for Microsoft Security Essentials
    http://windows.microsoft.com/en-IN/windows/troubleshooting-update-issues

    You can also install the updates manually from the link below.
    How to manually download the latest definition updates for Microsoft Security Essentials
    http://support.microsoft.com/kb/971606?wa=wsignin1.0

    Hope it helps.
    Keep us posted if you face any issues related to Windows in future. We will be glad to help you.

  • RELEVANCY SCORE 2.68

    DB:2.68:How To Retrieve Files From My Book Essential After Switching From Windows Xp To Window 7 pa


    please help

  • RELEVANCY SCORE 2.68

    DB:2.68:Since Installing Ms Security Essential, The Icon And That Of My Network Icon Is Taking A Long Time To Activate. Why., And How To Resolve 8m


    OS - WINDOWS VISTA BUSINESS
    32 -Bits

  • RELEVANCY SCORE 2.67

    DB:2.67:Help Winstalling Windows Security Essential 37


    Can anyone help me to install Windows Security Essentials? I have a Toshiba computer w/Windows XP, Home Edition 2002, Service Pack 2. I have tried installing on several occassions, but I receive an error message after the final stage. I removedall other
    security software. I just don't know what the problem is. Please help? Thanks.
    Fred

    DB:2.67:Help Winstalling Windows Security Essential 37

    First, you should be at SP3.
    Then, follow the steps in this checklist/faq, especially the part about uninstalling AND CLEANUP of all existing real-time antimalware before you install MSE:
    Check list for installing Microsoft Security Essentials

    Doc

    Computers verified since 1972

  • RELEVANCY SCORE 2.67

    DB:2.67:Security Essential Update Not Work x7


    Microsoft Security Esential error 0x80244009
    This error is appered after i repared the windows XP

    DB:2.67:Security Essential Update Not Work x7


    Uninstall the current MSE build (see below if you can't remove it via Control Panel) and reinstall from theofficial MSE download page.
    If that fails to work, please open a support case.

    To open an email support case, start here:
    https://support.microsoftsecurityessentials.com/

    The following information was provided by forum user, Aiscer, to assist in removing MSE if using Control Panel/Programs does not work properly:

    1. Download theMSE installer for your Operating Systemfrom the Home Page:http://microsoft.com/security_essentials
    2. Save the file to your Desktop. This will ensure that you can find it easily after the download is done.
    3. Now press the Windows Key and R all at the same time. This will open the RUN dialog box.
    4. Make sure that you delete any entries inside RUN. Now drag the MSE installer into the RUN dialog box.
    5.Depending on your Operating System, after dragging the file into RUN it shouldappear as anyof the three below:
    "C:\Documents and Settings\[YOUR USERNAME]\Desktop\mssefullinstall-x86fre-en-us-xp.exe"
    C:\Users\[YOUR USERNAME]\Desktop\mssefullinstall-x86fre-en-us-vista-win7
    C:\Users\[YOUR USERNAME]\Desktop\mssefullinstall-amd64fre-en-us-vista-win7.exe
    6. Now put a space in between the whole line and put /Uas seen below:
    "C:\Documents and Settings\[YOUR USERNAME]\Desktop\mssefullinstall-x86fre-en-us-xp.exe" /U
    C:\Users\[YOUR USERNAME]\Desktop\mssefullinstall-x86fre-en-us-vista-win7 /U
    C:\Users\[YOUR USERNAME]\Desktop\mssefullinstall-amd64fre-en-us-vista-win7.exe /U
    7. Hit OK.

    -steve

    ~ Microsoft MVP Windows Live ~ Windows Live OneCare| Live Mesh|MS Security Essentials Forums Moderator ~

  • RELEVANCY SCORE 2.67

    DB:2.67:Win 7 32 Bit And Photosmart Essential 3.5 a8


    I have a Dell XPS 410 with Win 7 Pro 32 bitinstalled. After installing the latest full drivers and software for my C309a from the HP site, eveything works except for Photosmart Essential 3.5. When I start the program, it quickly goes to the "stopped working" mode with a message that Windows will let me know when there is a solution to the problem. This also happened with Win 7 beta and RC but I hoped that it would be fixed with the production release. If I install the 64 bit version of Win 7, there is no problem. However, some of my other software won't run under a 64 bit OS, so I need to stick with 32 bit. Does anyone have any ideas of what my problem might be?

    DB:2.67:Win 7 32 Bit And Photosmart Essential 3.5 a8

    I've tried what you suggested and still the problem persists. I assume no one else has reported this kind of problem or else HP would have a work around or trouble report in place.

  • RELEVANCY SCORE 2.67

    DB:2.67:My Book Essential 1.5 Tb Problem ad



    I've used my HDD under Win 7 previously, now I started using Ubuntu is it possible to access my external HDD without installing windows again. Thanks in advance

  • RELEVANCY SCORE 2.67

    DB:2.67:Can't Get Past Logon After Installing Essential Microsoft Updates, Please Help! 1m



    g6-1331sa notebook. windows 7 home premium 64 bit.

    after installing microsoft essential updates for the first time after initial start-up i couldn't get past the logon screen. i switched off the laptop and rebooted in safe mode and restored to a backup point. the laptop is now working but i worry about these essential updates which are still waiting to be installed (43 in total). since this problem i have used hp support assistant and intsalled the recommended updates in the hope this would improve the matter. the problems that i recall, when i checked the events in safe mode, surrounded mainly around NET framework 4.0 updates, but there were a couple of other issues surrounding other updates but can't remember speciifics. if anyone can assist me with this matter i would be extremely grateful!

    DB:2.67:Can't Get Past Logon After Installing Essential Microsoft Updates, Please Help! 1m


    Hello,

    No Problem! Anytime!Enjoy the new laptop!

    'I am a volunteer!

    If it were a rattler. . . .

  • RELEVANCY SCORE 2.67

    DB:2.67:Update Kb2452054 To Visual Studio 2010 Constantly Fails. 1j


    Security update KB2452054 to Visual Studio 2010 constantly fails with error code 643. This is after taking a very long time processing the update. It is running on Windows 7 Pro (32-bit) SP1. Is there a way of fixing this apart from re-installing all of
    Visual Studio? The machine also then takes a long time to shut down because it is trying to apply this update.

    DB:2.67:Update Kb2452054 To Visual Studio 2010 Constantly Fails. 1j

    Thanks, but that still gives the same error code 643. Is un-installing and re-installing Visual Studio 2010 likely to solve the problem? If so is this the only solution?

  • RELEVANCY SCORE 2.67

    DB:2.67:Wmp54g Runs Disk Drive Constantly 87


    I installed this card on a Winxp sp 2 pc and found that the disk drive is running every 3 seconds or so. The drive activity stops when I kill the process called wmp54gsv1_1.Exe. However, the process auto-resumes shortly after I kill it. I don't even know if the process is essential for the wireless adapter to work. Any thoughts? Thanks!

    DB:2.67:Wmp54g Runs Disk Drive Constantly 87

    I installed this card on a Winxp sp 2 pc and found that the disk drive is running every 3 seconds or so. The drive activity stops when I kill the process called wmp54gsv1_1.Exe. However, the process auto-resumes shortly after I kill it. I don't even know if the process is essential for the wireless adapter to work. Any thoughts? Thanks!

  • RELEVANCY SCORE 2.67

    DB:2.67:After Window Essential Install My Computer Now Freezes After Startup. 9z


    After window essential install my computer now freezes after start-up. Im using avast anti virus. Is there a conflict between windows essential and Avast. is that the reason for system freeze. Im using windows XP service pack 2.

    DB:2.67:After Window Essential Install My Computer Now Freezes After Startup. 9z

    MSE requires XP SP3 and you cannot use MSE and Avast on the same computer.

    Unless you wish tocontinue to use Avastrecommend you uninstall MSE.

    If you wish to use MSE you must download and install SP3 and must remove Avast to include running the Avast Remval Utility.

    Avast Removal Utility:
    http://www.avast.com/uninstall-utility

    If you opt to continue using MSE please uninstall/reinstall MSE (after removing Avast) and you need to thoroughly review the following:

    Microsoft Security Essentials – Installation Checklist and Frequently Asked Questions

    And I presume you know you cannot continue to receiving monthly updates from MS for your XP OS unless you install SP3?

    Regards...

  • RELEVANCY SCORE 2.67

    DB:2.67:Microsoft Security Essential Installation Error.__Error Code0x80070002 0x80070001 j8


    i was installing the program on my xp 2. after checking for validity and starting installation, it gave the error code 0x80070002.
    i stopped and tried again but this time gave me 0x80070001.
    what do i do?

    DB:2.67:Microsoft Security Essential Installation Error.__Error Code0x80070002 0x80070001 j8

    Follow the instructions in this thread, especially the part about removing all existing realtime antimalware products and restarting your pc, before installing MSE:
    http://social.answers.microsoft.com/Forums/en-US/msestart/thread/bf757e6a-e320-4a67-92bc-767e6acb26c4
    Also, make sure you are up-to-date with the latest service pack (for you, xp sp3) and updates.
    Then install MSE from
    www.microsoft.com/security_essentials
    Doc

  • RELEVANCY SCORE 2.66

    DB:2.66:I Am Missing Microsoft Security Essential Icon To Pin It To My Task Bar .How Do I Get This Icon Without Uninstalling Re Installing This Program kz


    My system windows 7(64-bit)

    DB:2.66:I Am Missing Microsoft Security Essential Icon To Pin It To My Task Bar .How Do I Get This Icon Without Uninstalling Re Installing This Program kz

    It should be listed in the Action center,
    It's the Green icon with the Check mark on it,
    Right click and Open,
    Heck it's a free program, uninstall and reinstall at will,
    http://windows.microsoft.com/en-US/windows/products/security-essentials

  • RELEVANCY SCORE 2.66

    DB:2.66:Microsoft Security Essentials Turn Off Suddendly 7m


    I use windows vista n microsoft security essential.
    Ihave a problem: after update my MS essential, it turn off suddendly. When I try install again there is warning that "erroe code:0x8004FF07" and I can't turn on again my MS Essential.
    so, what should I do to solve it and my MS Essential can turn on again?
    Thanks_

    DB:2.66:Microsoft Security Essentials Turn Off Suddendly 7m


    I use windows vista n microsoft security essential.
    Ihave a problem: after update my MS essential, it turn off suddendly. When I try install again there is warning that "erroe code:0x8004FF07" and I can't turn on again my MS Essential.
    so, what should I do to solve it and my MS Essential can turn on again?
    Thanks_

    See -
    http://social.answers.microsoft.com/Forums/en-US/msestart/thread/29c086a6-eeb0-482a-9634-114def489ceb

    ~ Microsoft MVP Windows Live ~ Windows Live OneCare| Live Mesh|MS Security Essentials Forums Moderator ~

  • RELEVANCY SCORE 2.66

    DB:2.66:Can Not Uninstall Nero 7 Essential After Failed Installation. 9m


    I tried to install Nero 7 essential windows, it failed. When I tried to uninstall it is also failing. It looks like Windows 7 Nero essential is not compatible with Windows 8, but why Windows 8 is not allowing me uninstalling it also?

  • RELEVANCY SCORE 2.65

    DB:2.65:Microsoft Security Essential 7f


    Trying to remove Microsoft Security Essential program, is MSXML 4.0 SP@ (KB954430) and MSXML 4.0 SP2 (KB973688) part of this program? After deleting Microsoft Security Essential from the Control Panel, I notice I have an icon at the below right of my screen
    which is Windows Security Center (Security Essential).

    Thanks

    DB:2.65:Microsoft Security Essential 7f

    MSXML is not part of MSE.
    Windows Security Center? That isn't MSE.

  • RELEVANCY SCORE 2.65

    DB:2.65:0x800106ba kz


    sir ,after installing microsoft security essential ,windows defender is turned off,due to which i am unable to stop progrmms runing at startup. and while turning on the defender it is showing 0x800106ba error code.
    please suggest the solution for this problem.

    DB:2.65:0x800106ba kz

    If you are XP, Defender should be uninstall. If you are Vista/W7, Defender should be disabled. This is correct for having MSE installed.
    To control startup programs, go to START, RUN (or START, SEARCH) and enter MSCONFIG.
    Doc

  • RELEVANCY SCORE 2.65

    DB:2.65:Constantly Getting Updates For .Net Framework Files Over Over Again. 9z


    I had a problem with MS Framework and went to MS and downloaded it. Now my computer constantly downloads updates for .Net Framework 3.5 SP1 .Net Framework 2.0 SP2 and Security update 2.0 SP2 3.5 SP1 windows Servers. Immediatly after installing files
    it downloads same files again. Using Windows XP.

    DB:2.65:Constantly Getting Updates For .Net Framework Files Over Over Again. 9z

    http://taurarian.mvps.org/WU_XP/Net_Framework.htm
    Framework errors
    Check your update history for error codes, if any of these -
    Error Code: 0x80131700
    Error Code: 0x643
    Error Code: 0x80070002
    Error Code: 0x66A
    You will need to reinstall Framework –
    Error code "0x8007066A" when you use the Windows Update or Microsoft Update Web site to install .Net Framework updates:

    http://support.microsoft.com/kb/2507641/

    When you try to install an update for the .NET Framework 1.0, 1.1, 2.0, 3.0, or 3.5, you may receive Windows Update error code "0x643" or Windows Installer error code "1603"
    http://support.microsoft.com/kb/923100
    When installing updates using Windows update or Microsoft Update you may receive Error 0x643 or 0x80070643
    http://support.microsoft.com/kb/976982
    Use the above as a guide to fixing the problem.
    Use this to verify what versions are actually installed -
    .NET Framework Setup Verification Tool User's Guide
    http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx
    Reinstallation order:
    1. .Net Framework 3.5, then...
    2. .Net Framework 1.1, then...
    3. .Net Framework 1.1 SP1
    You can try if appropriate just repairing only the affected .NET Framework versions.
    Downloads for Framework:
    http://msdn.microsoft.com/en-us/netframework/aa569263.aspx
    etc

  • RELEVANCY SCORE 2.64

    DB:2.64:Help With Windows Live Essential Please 9s


    why does everytime i try to download windows live essential for xp at the end it tells me:
    try installing windows live programs again. programs were not installed because the installation was canceled. aborted 0x80004004

    DB:2.64:Help With Windows Live Essential Please 9s

    and where can i find those folders? and how does that of the modes work, i don't understand that part :/ !

  • RELEVANCY SCORE 2.64

    DB:2.64:Blue Screen While Installing Windows 2008 R2 Server xm


    Hi,I have installed Windows 7 32 bit OS after purchasing Lenovo Essential G510 (59-398343) which has DOS. Now I need another server based OS (dual) and I was trying to install windows server 2008 r2 from bootable CD. But it is not loading , blue screen appears.I need dual OS ( windows 7 32 bit OS as well as one Server OS.)Please suggest.

    DB:2.64:Blue Screen While Installing Windows 2008 R2 Server xm

    Hi SDlap,

    Please remove the Windows Server Disc if inserted in the CD/DVD drive and then make the changes in BIOS. Now insert the Disc and then press “F10” or “F12” when the Lenovo Logo appears on the screen and then select the CD/DVD drive this will initiate the installation.

    Do post us back if the issue still persists.

    Best Regards
    Shiva Kumar



    Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

  • RELEVANCY SCORE 2.64

    DB:2.64:Superantispyware Detects Gen-Kryptik.Process When Installing Windows Live Essentials 2012 f9


    Is windows essential 2012 infected with gen-kryptik.process?

    DB:2.64:Superantispyware Detects Gen-Kryptik.Process When Installing Windows Live Essentials 2012 f9

    No - if you're downloading from the official Microsoft site
    http://windows.microsoft.com/en-US/windows-live/essentials-home?SignedIn=1.

    Contact SAS support
    http://superantispyware.com/support.htmlto report a false positive.

    Good luck!

    Kosh

  • RELEVANCY SCORE 2.64

    DB:2.64:Downloading Essential Stalls sa


    Downloading stalls after I check English and Windows XP. I've allowed Microsoft.com to be a trusted site. Still does not work.

    DB:2.64:Downloading Essential Stalls sa

    What web browser?
    How are you connected to the Internet?
    -steve

    ~ Microsoft MVP Windows Live ~ Windows Live OneCare| Live Mesh|MS Security Essentials Forums Moderator ~

  • RELEVANCY SCORE 2.64

    DB:2.64:Windows Live Essential Kb2434419 Keeps Wanting To Install 8j


    The above update keeps wanting to install even though it has already done so at least three times. I keep ignoring it, but it doesn't go away. I thought after installing it again the last time it may go away, but doesn't. Any ideas? This is a 156Mb update.

    DB:2.64:Windows Live Essential Kb2434419 Keeps Wanting To Install 8j

    Tip: Use keyboard shortcut Alt+Tab to "scroll through" your open windows and see if there's a "hidden" window asking you a question related to Windows Live Essentials 2011 (e.g., Do you want to install all of the applications or just some
    of them?).

  • RELEVANCY SCORE 2.64

    DB:2.64:3tb My Book Essential Light Is On Constantly 77



    I attached this drive to a Windows 7 Professional machine that has Norton Security Suite running. The light is constantly on, which I assume to mean the something is accessing the disk constantly, yet nothing seems to be running. I looked at the Resource Monitor and selectively suspended various processes without changing anything. Does anyone know what this might be? Or how to find out? Thanks very much for any help.

  • RELEVANCY SCORE 2.64

    DB:2.64:Microsoft Security Essential Xp With Error Code0x80070643 jf


    I have use before on this computer. To put in Defender. I uninstalled MicroSoft Security Essential XP. For Defender installation it says MicroSoft Security Essential XP is still installed. Now I can't uninstall MicroSoft Security Essential XP by Windows
    XP at all. Here is the statement after trying to install MicroSoft Security Essential XP with Error Code:0x80070643
    Thank You

    DB:2.64:Microsoft Security Essential Xp With Error Code0x80070643 jf


    I have use before on this computer. To put in Defender. I uninstalled MicroSoft Security Essential XP. For Defender installation it says MicroSoft Security Essential XP is still installed. Now I can't uninstall MicroSoft Security Essential XP by Windows
    XP at all. Here is the statement after trying to install MicroSoft Security Essential XP with Error Code:0x80070643
    Thank You

    hi ,

    http://support.microsoft.com/search/default.aspx?query=0x80070643

    have a nice day

    http://www.microsoft.com/security + http://www.microsoft-hohm.com/default.aspx + http://www.getpivot.com/ + http://photosynth.net/ + http://seadragon.com/ + http://blogs.technet.com/mmpc + http://windowsteamblog.com/blogs/genuinewindows/default.aspx + http://technet.microsoft.com/en-us/sysinternals/default.aspx
    + https://www.microsoft.com/security/portal/Shared/Resources.aspx#rss + http://www.microsoft.com/security_essentials/ + http://onecare.live.com/site/en-us/center/whatsnew.htm + Plagued by the Privacy Center? Learn how to remove it http://blogs.msdn.com/securitytipstalk/
    + http://blogs.technet.com/ecostrat/ + http://memory.dataram.com/products-and-services/software/ramdisk + 50 Windows Tips http://windowsvj.com/wpblog/2009/12/windowsvj-xclusive-release-windows-7-tips-tricks-ebook/ + http://windowsteamblog.com/

  • RELEVANCY SCORE 2.63

    DB:2.63:2 Wd My Book Essential 3.0 Not Recognized In Windows After Bootcamp m3



    Hello, i just bought a new imac, and after installing windows 7 with boot camp i have a problem with 2 WD My Book Essential 3.0 external hard drives that are not being recognize when i boot in windows. In order to make them work i have to unplug and plug them again. Then, they will work fine, but its kind of annoying to do that.

    The external hard drives format is ntfs and i´ve already updated the firmware to the last available.

    Any way i can fix this problem.

    Tx a lot in advance.

    DB:2.63:2 Wd My Book Essential 3.0 Not Recognized In Windows After Bootcamp m3


    I really dont know, i´ve been serching 3 days for a solution and no way to find it. If i load the osx and use vmware the 2 drives work fine, the problem comes when i boot in windows. Then they are not reconigzed, and i have to unplug then, and plug them again in order to make them work, with all the risks that that means. Im starting to get a little bit fustrated.

    I´ve also asked in the apple forum, but it looks like no one knows the answer:

    There are a lot of people with the problem but it looks like there is not a solution

    https://discussions.apple.com/thread/2737794?start​=0tstart=0

  • RELEVANCY SCORE 2.63

    DB:2.63:An Error Prevent To Complete Installing Microsoft Seciurty Essential After Validation 1d


    installing microsoft seciurty essential

    DB:2.63:An Error Prevent To Complete Installing Microsoft Seciurty Essential After Validation 1d

    You probably want to see this post:
    http://social.answers.microsoft.com/Forums/en-US/msestart/thread/908fad3e-f9fc-4d8a-be83-ae7d3bc48db5

    -steve

    ~ Microsoft MVP Windows Live ~ Windows Live OneCare| Live Mesh|MS Security Essentials Forums Moderator ~

  • RELEVANCY SCORE 2.63

    DB:2.63:App Crashing Back To Home Screen Constantly fz


    Facebook and other applications App crashing back to home screen constantly. Even after clearing task list, un installing and re installing programs. Help please!

    DB:2.63:App Crashing Back To Home Screen Constantly fz

    Facebook and other applications App crashing back to home screen constantly. Even after clearing task list, un installing and re installing programs. Help please!

  • RELEVANCY SCORE 2.63

    DB:2.63:Disk Does Not Show Up Anymore cd



    After installing windows 7 service pak,My book Essential does not show up anymore.

    I desperately need help!!!

    DB:2.63:Disk Does Not Show Up Anymore cd


    Windows ask me to format my external drive in order to show it but I know there are original stuff on the disk and I am afraid to miss someting later (i.e. wizard)

  • RELEVANCY SCORE 2.63

    DB:2.63:When Trying To Install Windows Essential I Get An Error Number Ox80004005 js


    I get and error 0x80004005 when installing windows essential

    DB:2.63:When Trying To Install Windows Essential I Get An Error Number Ox80004005 js

    Hi,

    follow the steps in the belwo links:

    http://support.microsoft.com/kb/914232

    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-microsoft-security-essentials/010bd343-2c75-4ab8-84d0-7dd186f1d3f1