• RELEVANCY SCORE 3.37

    DB:3.37:Es Specials For Cucm 6.1x 7c





    There a number of ES loads for the 6.1.2 up on CCO. Anyone know where the readme files are for the ES and what they fix? Or do you have to download the file, and extract it?

    cheers!

  • RELEVANCY SCORE 2.98

    DB:2.98:Cucm Engineering Specials fa





    Hi,

    I have a customer who is interested in deploying Calabrio call recording.

    They have informed him that he needs to run CUCM 8.6.2.22033 which is an Engineering Special based upon CUCM 8.6.2.21900-01

    I have always tried to avoid ES releases based upon my experiences with Windows based CallManager where sometimes ES patches had to be removed before applying upgrades.

    My question is does using Engineering Specials with appliance based versions of CUCM have any gotchas? - e.g. can I base any upgrade planning on the CUCM base version (in this case CUCM 8.6(2a)SU1 as far as I can determine).

    Thanks

    DB:2.98:Cucm Engineering Specials fa


    Hi James,

    We have used many CUCM and CUC ES's over the years when required but

    you do need to be aware of certain bugs when doing future upgrades. Here is

    one such example

    CSCtx42925 - 8.6(2a)su1 upgrade rules to prevent install over ineligible ES's

  • RELEVANCY SCORE 2.88

    DB:2.88:Call Manager Help What Goes With What? sx




    Just trying to wrap my head around licensing Call Manager - if a customer has CM 6 and wants to add some phones, can we sell the phones and the licenses as separate items e.g.:

    1x CP-7961G

    1x SW-CCM-UL-7961

    Or would you have to supply the phone and then license it using the LIC-CM-DL-10 part code for instance (obviously depending on number of phones bought the license part code might change)?

    When you use the configuration tools its show the following single liences

    CUCM 3.x or 4.x RTU lic. for single IP Phone 7961

    Does this mean the liences you get with the phone is only for versions 3.X- to 4.x and to use version 5 you do it using the LIC-CM-DL-10 part - ????

    DB:2.88:Call Manager Help What Goes With What? sx


    Hi Robert,

    You have it right :) For CCM 5.x and 6.x you need the LIC-CM-DL-10 and as you noted this would increase depending on the number and model of phone you were installing.

    These part #'s are for 3.x and 4.x CCM Deployments.

    1x CP-7961G

    1x SW-CCM-UL-7961

    Hope this helps!

    Rob

  • RELEVANCY SCORE 2.82

    DB:2.82:Cucm 7 Annunciator Configuration. sd



    Hi,

    Please help me in configuring Announciator in CUCM 6.x/7.x

    Please suggest any document for the same.

    Any reply is helpful.

    Thanks,

    Manish

    DB:2.82:Cucm 7 Annunciator Configuration. sd


    Exactly what do you want to configure?

    If you start IPVMS it's already one created

    Annunciator Configuration

    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b04ann.html

    HTH

    java

    if this helps, please rate

  • RELEVANCY SCORE 2.80

    DB:2.80:Vm4.X Upgrade To Cucm 6.01 Be f1



    Hello,

    we try to upgrade to CUCM 6.01 BE on a new Hardware. During the Installation of the BE there is no Option to Import Files from a previous CM Version.

    Is it possible to upgrade from CM4.x to CUCM 6.x BE ?????

    If its possible, how ???

    In the Installation Guides of the CUCM BE there is no description of the upgrade path.

    Thanks for Help

    Regards

    Ralf

    DB:2.80:Vm4.X Upgrade To Cucm 6.01 Be f1


    Hi Ralf,

    You won't love this answer, but I thought it might help anyways :)

    The Cisco Unified Communications Manager Business Edition offering is for new installations only.There is no migration to or from the Cisco Unified Communications Manager Business Edition.

    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps7273/product_data_sheet0900aecd805e6985.pdf

    That being said, you can try using the BAT Export from CCM 4.x and use the data to build the phone/user config in BE. The files won't match exactly so you would have to play with the formatting.

    Hope this helps!

    Rob

  • RELEVANCY SCORE 2.73

    DB:2.73:Our New Tower Box cz



    1x edge router

    1x mfi connect to temp,doorsensor and relay for the fan

    1x apc 2u ups

    1x hp 1910-24g

    1x PSU for SAF link

    1x POE for AF24

    1x POE for ubnt cam

    3x POE for other ubnt on tower

    Still need to clean up the cables




    greenvilletowers.comZach Underwood (RHCE, RHCSA, RHCT, UACA)Globalvision.net

    DB:2.73:Our New Tower Box cz

    No he is like 5 feet 6 in



    greenvilletowers.comZach Underwood (RHCE, RHCSA, RHCT, UACA)Globalvision.net

  • RELEVANCY SCORE 2.58

    DB:2.58:Desktop Sharing Activation On Cucm 8.0.3 ss



    Hi,

    we have CUCM 8.0.3 installaed. jabber is working fine but we are not able to share desktop. according to documents it's

    cmterm-bfcp-e.8-6-2.cop.sgn file need to be added on CUCM 8.6.2 or higher but documents does not tells anything obout the lower versions of CUCM.

    can anyone help in this regards and guide the which COP file to be uploaded on CUCM 8.0.3 version for enabling BFCP.

    Thanks.

    DB:2.58:Desktop Sharing Activation On Cucm 8.0.3 ss


    Hi,

    Only 8.6.2 or above support Video desktop sharing.

    Thanks,

    Maqsood

  • RELEVANCY SCORE 2.55

    DB:2.55:Looking For License Mac Cucm Version 6 xz



    Hi

    I am trying to find the licesne mac address for CUCM version 6

    Usually with show status the license is there

    But now i cant find it

  • RELEVANCY SCORE 2.55

    DB:2.55:Virtualisation Way Or Classic Way 3a


    Hi guys

    For my internship I have to develop a new server room for the company I'm with. They are running a fault tolerance server with Windows Server 2000 and a cache server. Because this fault tolerance server is counting his days, they asked me to develop a new server
    room for them. They would also like a central mail server with Exchange.

    We had a talk with their supplier and he offered us two propositions:

    1. Just replace the current fault tolerance server with a new one and place a fysical Exchange server. This for a total of 87.560.

    HARDWARE

    1x NEC Express 5800/R320a-M4 Fault Tolerant 1x NEC Express 5800/T120b-M 2x Powerware 9130 On Line - 3.000 VA 1x Powerware 5115 Off Line - 1.750 VA
    SOFTWARE

    1x Windows Server 2008 R2 Enterprise Extra CAL's to 60 users 1x Windows SBS Premium 2008 - 60 users 1x Veritas Back Up Exec 2010 SBS 1x Veritas Back Up Exec 2010 System Agent 1x PC Anywhere 1x Cache license - 60 users

    2. Virtualisation with the following specs for a price of 87.857:

    HARDWARE

    1x Eternus DX80 SAN 2x NEC Express 5800/T120b-M (for virtualisation) 1x NEC Express 5800/T120b-E (for backup and control center) 2x Powerware 9130 On Line - 3.000 VA 2x 24 ports Gigabit switch 1x Rittal rack 42HE
    SOFTWARE

    vSphere Essentials Plus vSphere Essentials Plus maintenance / year 2x Windows Server 2008 R2 Enterprise 1x 10 extra CAL's 1x Full Exchange Server Standard 2010 60x Exchange Server Standard 2010 CAL's 1x Cache license - 60 users 1x Veritas backup

    Now I'm thinking.. Isn't it possible to use Hyper-V virtualisation instead of VMWare? You're buying two times Windows Server 2008 R2 Enterprise. One WS2k8 R2 Enterprise says that you can use that license 4 times, so that's already 8 usable. But at this company,
    they'll never use 8 licenses, so use 2 for Hyper-V and there are still 6 remaining. Use a license for the cache, mail server, Domain Controller and a fileserver. That are 6 licenses in total, there are still 2 left.

    Isn't this a better idea? What do you guys think? Do you also have another suggestion(s)?

    Also another question. When you use Hyper-V, is it still necessary to use Veritas for backup?

    DB:2.55:Virtualisation Way Or Classic Way 3a

    Kevin, really thanks for your detailed explanation! I'm happy to hear that a real expert approves my idea of using Hyper-V for this project ^_^
    I'll keep the tools you mentioned in mind when I'm going to write my document, I'll also add it to the list of software. One more question though. For backup/management, is it necessary to buy a separate server and place it in the network? Or is this just
    overkill and let's virtualize this?
    Oh I just thought about it. What system requirements would be sufficient to run everything smoothly? Would this system (except the RAM) be good enough?

    http://www.hpsales.eu/product_info.php?products_id=2164004language=nl
    What would be better: 34GB, 36GB or 38GB?

  • RELEVANCY SCORE 2.54

    DB:2.54:Maximum # Of Cucm Vm Profiles/Pilot Points? 9s



    I'm looking at introducing CUCM 7 to a CCME/CUE network with 35 branches. I cannot find a stated maximum number of VM profiles/Pilot Points for CUCM 6 or 7. Does anyone know where/what that number is?

    Thanks!

    DB:2.54:Maximum # Of Cucm Vm Profiles/Pilot Points? 9s


    there is no number of max VM profiles

    there is one for pilot points

    AC Performance and Capacity

    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/cmapps.html#wp1129943

    HTH

    java

    if this helps, please rate

  • RELEVANCY SCORE 2.52

    DB:2.52:Unity Connections 8 And Cucm 6? j8



    We're running Unity Connections 71.2 and CUCM 6.1.4.  I need to upgrade both, but I'm waiting on CUCM for new hardware which may take months.

     

    Unity Connections is having problems and needs constant reboots.  I'm trying to see if I can upgrade to Unity Connections 8.6 and keep CUCM 6.1.4.  Is that possible?  I couldn't find the relevant compatibility matrix.

     

    Thanks!

    DB:2.52:Unity Connections 8 And Cucm 6? j8


    Link worked, and version supported -- even all the way back to 5.x - wow!

     

    Thanks

  • RELEVANCY SCORE 2.51

    DB:2.51:Bars Compatible With Cucm 6.Xx js



    Hello everybody,

    Is it possible to install BARS on CUCM 6.XX ?

    Regards,

  • RELEVANCY SCORE 2.50

    DB:2.50:Cucm Redondancy ds



    Hi,I have a Cisco IP telephony solution with 1x cucm Publisher (v8.5) and 2 subscribers. I need to add another box and set it up to act as the failover cucm for the publisher. Can this be done? If so any thought how to set it up?I dont need a 3rd subscriber, but a box that will take over the publisher's role if the primary one goes offlineBy the way the 2nd box will have to be setup in remote site connected to the primary one with a 10M LAN linkThanks in advanceIhssan

    DB:2.50:Cucm Redondancy ds


    I'm afraid not.

    Aaron Harrison
    Principal Engineer at Logicalis UK

  • RELEVANCY SCORE 2.50

    DB:2.50:Cucm 6 Ldap Sync 7c



    Hello everyone!

    We have CUCM 6 configured for LDAP sync with AD. It used to work fine until I noticed that whenever I make changes to current users (phone number etc), these changes are not reflected in CUCM, it still shows old information. Even If i move user's account in AD or delete it, the information still appears in CUCM

    Any ideas how I can resolve this?

    Thank you!

    DB:2.50:Cucm 6 Ldap Sync 7c


    Issue is solved, the problem was with my AD console not replicating to the domain controller

  • RELEVANCY SCORE 2.50

    DB:2.50:Cucm 4.L To Cucm Business Edtion Latest Version. 3x



    Customer had - MCS-7825-H1-IPC1, CUCM 4.1 version, we need to upgade now to CUCM 8.6 business edtion with new server [MCS7828I5-K9-BE8E]

    If it possible to upgade CUCM 4.1 to  CUCM business edtion 8.6 with "MIG-CUCM-USR-A ? or please light me the upgarde procedure for cucm 4.l to cucm business edtion latest version.

    DB:2.50:Cucm 4.L To Cucm Business Edtion Latest Version. 3x


    BALAMURUGAN SINGARAM wrote:

    Or can we install CUCM 8.6, 7816 or 7825 equilvant HP or IBM server with 4GB ram 160 GB HDD, it is allowed, cisco will support this ?

    Whether your hardware supports CUCM 8.6 installation or not can be confirmed from this link http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/prod_brochure0900aecd8062a4f9.html

    If you find your server model in the list as supported for CUCM 8.6, you are good, else the model can be considered as unsupported. The link also has a pointer to HP/IBM equivalent supported servers.

    Pls rate the post if it helps.

    GP

  • RELEVANCY SCORE 2.50

    DB:2.50:Registration Of License For Cucm 6 Be dd



    Hi,

    When I register CUCM 6 BE, It says: Purchase of a support contract must be done before a Unified Communications Software Subscription can be enabled. Please provide your support contract number or purchase order information if contract is still being set up.*

    Is the service contract a must to get CUCM 6 to work?

    Thanks

    DB:2.50:Registration Of License For Cucm 6 Be dd


    Hi, Rob,

    I've got 2 PAK, one is for the software license, another is for device license. I think the CUCM 6 BE is a combo, I don't have to input licenses for both CUCM and UC individually.

    I'm requesting the sales for the SmartNet Contract number to proceed.

    Thanks,

    Jon

  • RELEVANCY SCORE 2.48

    DB:2.48:Cucm 6 Vs Cucm 7 39



    Hi,

    Please let me know, what is the basic difference between CUCM 6 and CUCM 7.

    Regards,

    Manish

    DB:2.48:Cucm 6 Vs Cucm 7 39


    Lots of improvements for SIP and other features.

    Please check our release notes for CUCM 7.x

  • RELEVANCY SCORE 2.48

    DB:2.48:How To Add Mcu 3545 To Cucm 6 For Audio Conference Calls cc



    please i need a guide on how to add MCU 3545 to CUCM 6 to host Audio conference calls.

    i already have DID setup and working fine.

    Thank you

    DB:2.48:How To Add Mcu 3545 To Cucm 6 For Audio Conference Calls cc


    Hi,

    Please check the configuration guide for MCU

    http://www.cisco.com/c/en/us/td/docs/video/cuvc/5_6/mcu/3545/configuration/guide/config-guide-Wrapper/protocols.html#wp1094762

    HTH

    Manish

  • RELEVANCY SCORE 2.48

    DB:2.48:Dim 4600 Boot Problems - Please Help 9d


    I have a Dimension 4600 with 1GB ram, 1x 40Gb HDD, 1x200Gb HDD, 1x SATA 160GBHD, Radeon 9800 pro. This system is barely 18 months old. I have not made any modification (new H/W) to the PC for at least  6 months.

  • RELEVANCY SCORE 2.48

    DB:2.48:Support Patch Vs. Engineering Special a7



    Hi,

    Do support patches contain all fixes in previous engineering specials?

    Example: I have ES 63 for CM 3.2(2c) and it fixes bug CSCdz87527. Then SP H was released but I do not see this bug as being fixed.

    So I guess my question is even though I have the latest SP on CM do I still have to install the old ES?

    Do SP equate to a specific ES #?

    Any info is greatly appreciated

    Thanks

    Frank

    DB:2.48:Support Patch Vs. Engineering Special a7


    It looks as though CSCdz87527 is serious issue. If this is causing your CallManagers to crash then you may want to use es63. Using spH will not provide the fix for CSCdz87527.

  • RELEVANCY SCORE 2.47

    DB:2.47:Cucm Api sk



    Hi,

     

    Where I can download free API for CUCM?

     

    Thanks!

    DB:2.47:Cucm Api sk


    Hi

    developer.cisco.com

    There are lots of APIs - what are you trying to do?

    Aaron

     

     

  • RELEVANCY SCORE 2.47

    DB:2.47:Caracters Specials Ksoap? Encode? aj



    hi later to try i can save a xml response from a webservice.. but i find a litle problem, i have severals words whit characters specials, whit ñ, and "tildes".. example à, è etc... how i can enconde utf8 the response?

    thanks for advance

    DB:2.47:Caracters Specials Ksoap? Encode? aj


    Hi,

    I use KSOAP, and I never had problem with special chars

    Where do you have the problem?, when you received the response or when you parse the response?

    When you parse the response, you can create the String with the appropiated encode.

    String(byte[]bytes, Stringenc) Construct a new String by converting the specified array of bytes using the specified character encoding.

    Regards,




    If your issue is resolved, please mark this thread as solved. Click "Accept as solution" on the post that contains the answer to your question.

  • RELEVANCY SCORE 2.45

    DB:2.45:Cp-6921-C-K9 As Sip Phone On Cucm 6? dm



    Can a CP-6921-C-K9 phone be used as a third party SIP device on CUCM 6?

    We will be upgrading soon to a new version of CUCM where 6921 would be supported but for now can we get them to work on CUCM 6 as SIP phones?

    Regards.

    DB:2.45:Cp-6921-C-K9 As Sip Phone On Cucm 6? dm


    Hi Kasey,

    yes I found the same information about SIP support in 7.1.X but was wondering if anyone had tried to connect the phones as a third party SIP phones in CUCM 6. I don't see why it should not work but there is no way for me to test this now.

  • RELEVANCY SCORE 2.45

    DB:2.45:Tracking Instant Message Conversations In Microsoft Dynamics Crm pd


    Hi,I am following Tracking Instant Message Conversations in Microsoft Dynamics CRMhttp://blogs.javista.com/2008/06/02/tracking-instant-message-conversations-in-microsoft-dynamics-crm/ article but in my Outlook 2007, I can't find Track in CRM button. What's wrong in my settings.FYI:SERVER:-1x crm4, crm4 email router-1x office communication server 2007-1x AD Win 2k3 R2SP2-1x Exchange 2007CLIENT:-1x crm4 client +1x crm4 for outlook +1x cisco client +1x outlook 2007 +1x communicator 2007Between communicator can talk without problemI can see chatting conversation in Outlook Historythanks

    DB:2.45:Tracking Instant Message Conversations In Microsoft Dynamics Crm pd

    Imran,Sorry for my mistake.I haven't run CRM4Outlook Configuration Wizard.When I run the wizard, I encounter it can't connect to the server.After searching, I found this tool in this link http://support.microsoft.com/kb/948779 and http://www.sadev.co.za/node/171.Then I run the tool, after that then I can connect using crm4outlook from the client.In the Outlook client, then I can see Track in CRMthanks

  • RELEVANCY SCORE 2.45

    DB:2.45:Unity 4.2 Engineering Specials Available On Cisco.Com a3



    In a proactive effort to make important Unity defect fixes directly available to customers, the Unity team is starting to post Unity Engineering Specials on Cisco.com.

    A set of recommended Unity 4.2(1) Engineering Specials have been posted to the following location:

    http://www.cisco.com/cgi-bin/tablebuild.pl/unity-42

    Please refer to the attached readme (also included in the ES package) for installation instructions as well as to understand what is included in this ES package.

    Look for Unity 5.0(1) Engineering Specials to be posted in the near future.

    Thanks.

    Mike

    DB:2.45:Unity 4.2 Engineering Specials Available On Cisco.Com a3


    In a proactive effort to make important Unity defect fixes directly available to customers, the Unity team is starting to post Unity Engineering Specials on Cisco.com.

    A set of recommended Unity 4.2(1) Engineering Specials have been posted to the following location:

    http://www.cisco.com/cgi-bin/tablebuild.pl/unity-42

    Please refer to the attached readme (also included in the ES package) for installation instructions as well as to understand what is included in this ES package.

    Look for Unity 5.0(1) Engineering Specials to be posted in the near future.

    Thanks.

    Mike

  • RELEVANCY SCORE 2.45

    DB:2.45:Procedure For Upgrade Cucm 6.Xxx To 6.Yyy 9x



    Who can advice me procedure for upgrade CUCM from version 6.XXX to 6.YYY?

    Where I can read about this?

    DB:2.45:Procedure For Upgrade Cucm 6.Xxx To 6.Yyy 9x


    Hi,

    Below is the procedure in brief:-

    1. Check the CUCM Version Compatibility with the Upgrade Version.

    2.Take a complete Disaster Recovery Backup of the Publisher Server using a SFTP Server that is always accessible through the Network.

    3.Navigate to the OS Administration on the Publisher Server, Login to the OS Administration Page

    Click on Software Upgrade - Install/Upgrade

    Use the DVD Media if you are upgrading from the DVD

    If you are upgrading from the Remote File System, enter the below:

    Directory /

    Server x.x.x.x

    User Name (SFTP/FTP Username)

    User Password (SFTP/FTP Password)

    Transfer Protocol:- SFTP/FTP

    Click on Next

    4. You should see the Upgrade File

    5. Continue with the Wizard (if you would like to complete the upgrade automatically, choose to boot to upgraded Partition, else you can do a manual switchover

    Settings - Version- Switch Version to boot to the Upgraded Partition).

    6. Only upon booting to the upgraded partition, start the Subscriber Upgrade.

    Regards,

    Thanks and Regards

    Sriharshaa Prabhakar

    Senior Consultant - Cisco Unified Communications

    Network Telecoms Group

    Mannai Corporation, QSC

  • RELEVANCY SCORE 2.45

    DB:2.45:Cdr Billing Product For Cucm 6 - Recommendations? 1s



    I am looking for a CDR billing product that will allow me to generate easy-to-read and understand reports for our network users. Can someone recommend one that will work CUCM 6?

    -Shikamaru

    DB:2.45:Cdr Billing Product For Cucm 6 - Recommendations? 1s


    Cisco Unified Communications Manager is not designed to process the CDR records generated by the router during fallback. Calls that are placed through the PSTN receive billing information only by the PSTN billing system. You can use CiscoWorks Voice Manager to export the call history log to a file that can then be processed in CDR format. CDR records can also be logged onto a syslog or a RADIUS server.

    The SRST router provides CDRs in two formats -- syslog and RADIUS. In both formats, you need an external server to collect the CDR records from the SRST router.

    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/prod_qas0900aecd8028d113.html

  • RELEVANCY SCORE 2.44

    DB:2.44:How To Install A Backup On Cucm 6? sp



    Hi,

    I have just upgraded my CUCM from 6.1(4) to 6.1(5) (oh and the inactive partition is every old version of 6.1(3) but there has been a bit of an issue and I need roll back to a pervious version backup.

    Thing is all my backup are from version 6.1(4), Therefore can I install the backup from CUCM 6.1(4) straight on to CUCM 6.1.(5) or to I have to downgarde back to version 6.1(4) before I install the backup?

    Cheers for any help

    DB:2.44:How To Install A Backup On Cucm 6? sp


    Hi

    You need to restore to the exact version that you backed up from.

    Also best to keep your problem in one thread with an accurate description of what you've done rather than open a load of separate ones.

    Regards

    Aaron

  • RELEVANCY SCORE 2.43

    DB:2.43:Slow Browsing Even Though Having A Good Internet Download Speed zd



    All my browsers wait for the web page to get loaded ( waiting for xxxxxxxx.com),even though I have a good internet speed in downloading.Especially when a web address is typed in new tab its just waits too long to get the page to be loaded.my network is connected to  ISP thru  their node(cisco 2750),from node its connected to cisco 4500 switch,from there to three firewalls (cisco ASA series  ).Have 16 public IP address ,and in my cisco 4500 a default route is been set to the ISP node

    vlan 10

    ip address a.b.c.d 255.255.255.240

    vlan 100

    ip address 1x.1x.1x.6 255.255.255.252

    ip route 0.0.0.0 0.0.0.0 1x.1x.1x.5 (Isp node private ip)

    kindly respond and help,what configuration have to be done to resolve the slow browsing

    DB:2.43:Slow Browsing Even Though Having A Good Internet Download Speed zd


    I was curious to see if there were any updates to this issue.

    I am wondering if further testing was done. What makes you think you have "good" bandwidth speed?

    As Tanveer stated, I would eliminate the ASA's and see if speed increases. I'm suspecting a DNS issue myself. Seems like DNS is taking a long time to resolve the name to IP to load the page.

    Have you checked speed and duplex settings on each device?

  • RELEVANCY SCORE 2.43

    DB:2.43:Migrate Licences Ip Phones (Dlu) From Cucm 4 To 6 cx



    Hello,

    A customer have a CUCM 4.1 cluster in a remote office, and a CUCM cluster 6.1 in the headquarter, now we will migrate the IP Phones for the remote office in the CUCM 6.1 Cluster.

    I want to ask you how to get licences for IP Phones from the CUCM 4.1 cluster to add it in the CUCM 6.1 Cluster.

    Regards

    Mohamed

    DB:2.43:Migrate Licences Ip Phones (Dlu) From Cucm 4 To 6 cx


    Hi Mohamed,

    The problem with the reply from Cisco is that they don't realise that you are not using DMA migration to move from CCM 4.x to CUCM 6.x which would generate the proper info for DLU Licensing :) The most important fact here is that you want to add phones that are already licensed on a 4.x build to an **Existing 6.x build without using DMA. So yours will require a **Manual** license issue.

    We need to move XXXX Licensed Phones from a CCM 4.x cluster to an **existing** CUCM 6.x we would require these DLU's to be tied to existing Publisher MAC AAABBBCCCDDD accordingly.

    Can you please send us the IP Phone DLU calculator spreadsheet so we can fill in the appropriate device information.

    The note below;

    Step 1: In Cisco Call Manager Administration, choose System Licensing License File Upload. The License File Upload window displays

    Refers only to CUCM 5.x and above and is done when using the DMA migration method.

    Hope this helps!

    Rob

  • RELEVANCY SCORE 2.43

    DB:2.43:Cucm 6 Upgrade To 8.6 And Add New Usr-Lic fs



    Hi Guys,

    I have a requirement from one customer. Basically, I have to upgrade the exsiting CUCM 6 to CUCM 8.6 and also to add new user license. The existing CUCM has arround 400 users, and I need to upgrade the License to 1000. I'm trying to prepare a quote using UCSS, please check below BOQ and tell me If I'm missing something:

    CUCM-USR-LIC                              Top Level Sku For User License                                                                                                                                       1

    MIG-CUCM-USR-A                         Migration to UC Manager Enhanced - Less than 1K Users                                        300

    UCSS-UCM-1-1-A                    UC      Manager Enh UCSS Less than 1K users - 1 user - 1 year                                                       300

    MIG-CUCM-BASIC-A       Migration to UC Manager Basic - Less than 1K Users                                                                      300

    UCSS-UCM-BAS-1-1-A          UC      Manager Basic UCSS Less than 1K users - 1 user - 1 year                                             300

    UCM-7835-85                                             CUCM 8.5 7835                                                                                               3

    CCX-85-CMBUNDLE-K9               CCX 8.5 5 Seat CCX ENH CM Bundle - AVAILABLE ONLY FOR NEW CM                              1

    CUCM-PAK                    Include PAK Auto-expanding PAK for CUCM                                                                                                                             1

    CUCM-USR                    Include PAK Auto-expanding User for CUCM                                                                                                              1200

    UCM-7835-85-UKIT          CUCM 8.5 Upgrade Media Kit                                                                                                                                                 1

    UCM-7835-UPG-NODE          CUCM 7835 Upgrade Node                                                                                      3

    UCSS-UCM-BASIC-PAK          Include PAK Auto-expanding User for CUCM 8.0                                                                                          1

    UCSS-UCM-PAK                    Include PAK Auto-expanding UCSS PAK for CUCM                                                             1

    What I want to know, do I require other part # for the new user license or it's ok I can use the MIG-CUCM-USR-A to upgrade and add more license??

    Thanks

    Naoufal

    DB:2.43:Cucm 6 Upgrade To 8.6 And Add New Usr-Lic fs


    You probably need to read through the ordering guide once more. The MIG-CUCM-USR SKUs are meant to upgrade a customer who does not have UCSS entitlement. It seems unlikely that a customer on CUCM6 would have already allowed their UCSS contract to lapse. If they still have UCSS you only need to place a PUT order for them and then add CUCM-USR SKUs for the additional users they are adding. Also be careful to pay attention to users vs. public space devices.

    Your Partner Account Manager or supporting Customer SE can help you more interactively than this forum allows.

  • RELEVANCY SCORE 2.43

    DB:2.43:What Is The Simplest Solution For Implementing Phone Book In Cucm 6? 79



    What is the simplest solution for implementing phone book in CUCM 6?

    DB:2.43:What Is The Simplest Solution For Implementing Phone Book In Cucm 6? 79


    But with this solution I should create users in CUCM directory. How I can prevent configuration that depends on adding users in CUCM?

  • RELEVANCY SCORE 2.43

    DB:2.43:Cucm Encryption On Ucs dp



    Hi everyone:

    I need to order a migration of CUCM from 6.x to 8.x, and my customer wants encription in that new CUCM using UCS. I not sure what items I must purchase.

    CUCM migation Licences (CUCM-USR-LIC )

    UCS (UCS-C210M2-VCD2)

    VM ware license (VMW-UC-STD-K9-1A)

    Tokens (KEY-CCM-ADMIN-K9=), at least two.

    My questiona are:

    Is the encryption supperted UC on UCS?????

    Is the last part number (KEY-CCM-ADMIN-K9=) valid for UCS platform??????

    Is KEY-CCM-ADMIN-K9= only valid in MCS infraestructure????

    Francisco Arias Reyes

  • RELEVANCY SCORE 2.43

    DB:2.43:Activating Snmp For Cucm 3a



    Hi,

    I have a CUCM 6. I will activate SNMP service, put snmp destination..etc and restart "SNMP Master Agent".

    My Question:

    - could enabling SNMP on all nodes affect the CUCM? CPU? anything that I'am missing? we have thousands of IP-Phones connected and crashing the CUCM would be a nightmare.

    - Will the CUCM send me only failed services? how many traps will be generated?

    Jay

    DB:2.43:Activating Snmp For Cucm 3a


    Does anyone know if this is service affecting?

    Just to confirm the SNMP Master agent needs to be restarted after making changes.

    Will it cause any issues with phones rebooting?

    Many thanks in advance

    Amre

  • RELEVANCY SCORE 2.43

    DB:2.43:Zune Movie Specials x7


    Hi guys,
    i noticed there is a couple of specials for some movies on the xbox 360. I go to buy the movies at the special price, but it still wants to charge me the full price for the item. Is there something doing wrong or this is fail on Zunes behalf?

    DB:2.43:Zune Movie Specials x7

    Hi x0de,
    Have you sort out your question? Is it still showing youthe special price and charging you the full price?

  • RELEVANCY SCORE 2.43

    DB:2.43:Sip Phones Certified For Cucm 6? xk



    Can anyone recommend a SIP phone that is certified for CUCM 6 that is comparable to the 7911?

    -Shikamaru

    DB:2.43:Sip Phones Certified For Cucm 6? xk


    Just browse online to see the 9xx models and the different prices. Usually phones are chosen by customers based on price mainly.

  • RELEVANCY SCORE 2.42

    DB:2.42:Filter By Ip The Admin Access To Cucm 6 fc



    Hello,

    For security reason, I'd like only my Administrator lan be able to connect to the CUCM Page. (https://cucm:8443/ccmadmin)

    I cannot filter by acl on my router as the port 8443 is also used by the ccmuser page (https://cucm:8443/ccmuser)

    Is there a way to do that on CUCM 6 ?

    Thanks for your answer

    DB:2.42:Filter By Ip The Admin Access To Cucm 6 fc


    You probably cant do it thought ACL because the ccmadin and the ccmuser pages use the same ports.   Even if you changed the port, they still both use the same ports.

    You should really use the Application user account security built into CUCM.   Turn on account login failures and you will know if someone is trying to log into the CUCM pages that does not have access.  Usually reports the IP address and usernames tried.  (RTMT)

  • RELEVANCY SCORE 2.42

    DB:2.42:Phones Are Not Connecting Automatically To New Cucm 9.1 Have To Delete The Ctl File Manually x1



    Dear Team,

    We are upgrading customer CUCM from 6.X to 9.1. It is parallel setup. we have CUCM setup on new UCS server with different IP. Now aif we shift the phone to new CUCM, it is not registering to new CUCM. We have to delete the CTL file manullay on the phone.

    Any advise on it, we can not manually erase the CTL files.

    We are using security on existing CUCM. We had installed the certificate on 6.1 CUCM and enable the secure profiles for the phones.  Do you think I have to install the same certificate on new CUCM.

    Your valuable input are very important to us.

    BR

    Muhammad Irfan

    DB:2.42:Phones Are Not Connecting Automatically To New Cucm 9.1 Have To Delete The Ctl File Manually x1


    Hi Irfan,

    what certificate you upload on new cucm server?

    could you please post the steps you follow to migrate phones from old cluster with security to new cluster with out security?

    thanks 

    regards

    Mc

  • RELEVANCY SCORE 2.42

    DB:2.42:Night Bell With Cucm 6.X 87



    My customer is requesting a night bell service for after hours calls. I know this is possible with CME, but they are running CUCM 6.x. Is there a 3rd party product that can accomplish this?

    thanks all.

    DB:2.42:Night Bell With Cucm 6.X 87


    Thanks for the reply.

    The customer is looking for a type of ring/bell to ring over the PA system that is currently running to a EM card on the ISR router. Basically I'm thinking of some type of call park that makes the night bell ring and someone dials the DN for that call park.

  • RELEVANCY SCORE 2.42

    DB:2.42:Ejecucion Incompleta De Archivo .Bat Mediante Una Tarea Programada From Task Manager 1k


    Buenos días, Saludos cordialmente!!
    Tengo una archivo .bat, el cual es ejecutado el comando “Net Time” para cuatros estaciones para indicarme su hora actual, está configurado mediante una tarea programada y que al ejecutarse sólo procesa el primer comando:

    Archivo: tmreport.bat.bat
    @echo off
    echo ___________________________________ C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log

    Resultado por Tarea Programa: tmreport.log
    _________________________________________________________
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:15:00 PM
    The command completed successfully.
    NOTA: Sin embargo, al ejecutarlo manualmente si
    Archivo: tmreport.bat.bat
    Resultado ejecutándolo de forma manual: tmreport.log
    _________________________________________________________
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:15:00 PM
    The command completed successfully.
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:15:00 PM
    The command completed successfully.
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:14:45 PM
    The command completed successfully.
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:14:57 PM
    The command completed successfully.

    ¿A qué se deberá esto?
    Saludos y gracias de antemano por la ayuda que me puedan,

    Richard

    DB:2.42:Ejecucion Incompleta De Archivo .Bat Mediante Una Tarea Programada From Task Manager 1k

    Buenos días, Saludos cordialmente!!
    Tengo una archivo .bat, el cual es ejecutado el comando “Net Time” para cuatros estaciones para indicarme su hora actual, está configurado mediante una tarea programada y que al ejecutarse sólo procesa el primer comando:

    Archivo: tmreport.bat.bat
    @echo off
    echo ___________________________________ C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log
    net time \\1x.1x.1x.1x C:\logs\tmreport.log

    Resultado por Tarea Programa: tmreport.log
    _________________________________________________________
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:15:00 PM
    The command completed successfully.
    NOTA: Sin embargo, al ejecutarlo manualmente si
    Archivo: tmreport.bat.bat
    Resultado ejecutándolo de forma manual: tmreport.log
    _________________________________________________________
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:15:00 PM
    The command completed successfully.
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:15:00 PM
    The command completed successfully.
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:14:45 PM
    The command completed successfully.
    Current time at \\1x.1x.1x.1x is 1/27/2013 1:14:57 PM
    The command completed successfully.

    ¿A qué se deberá esto?
    Saludos y gracias de antemano por la ayuda que me puedan,

    Richard

  • RELEVANCY SCORE 2.42

    DB:2.42:Third Party Device And Cucm 6.0 77



    Anyone have experience with the interop of a third party SIP device registering and using CUCM 6.X? I am trying to find a workable softphone solution for Linux and then MAC.

    Thanks,

    Rob

    DB:2.42:Third Party Device And Cucm 6.0 77


    I use SJLabs and Xlite

    both in windows and linux flavors

    And also you can use SJLabs and Xlite in MAC

  • RELEVANCY SCORE 2.42

    DB:2.42:Specials? s3


    hey, does any1 know if F.S will have any specials on the PS3, for xmas or boxing day sale? and if u kno how much it will be could u tell me, i have the money now for a 80gb but its almost xmas and boxing day so im assuming they might lower the pricesdoes any1 kno if they will and how much a 40gb and 80gb will be

    DB:2.42:Specials? s3

    ya, its always crazy i went there last bxing day round5am and it was still,packed lines going ointo the parking lots i went:manvery only 4 a ipod and thats it

  • RELEVANCY SCORE 2.42

    DB:2.42:1x Ds3 And 1x Fastethernet Port 9k



    What will be a cheap solution for that?

    Thank'x!

    DB:2.42:1x Ds3 And 1x Fastethernet Port 9k


    Thank you for your promt anser.

    I will use 2 modules (NM-1T3/E3 and FastEthernet) together with a old 3640.

  • RELEVANCY SCORE 2.42

    DB:2.42:Transformation Patterns Cucm 6 7x



    What are transformation pattern used for? Any example?

    Thank you!

    DB:2.42:Transformation Patterns Cucm 6 7x


    Just remove partner/ from the url and you should be able to access

    HTH

    java

    if this helps, please rate

  • RELEVANCY SCORE 2.42

    DB:2.42:Sx20 ,Ex90 With Cucm kf



    Hi

    the customer wants to buy SX20 and Ex90 , and he needs information in my side,  the Questions :

    - Does he need a VCS ? or CUCM it is enogh for that ?

    - what is the CUCM version is supported for SX20 , EX90 ?

    - how to add these endpoints to CUCM ?

    - regarding the Bandwidth ,  what is the good the bandwitdth to make the video and audio calls are very clear and high quality ? up to 6 Mbps ?

    - what is the version for SX20 , EX90 should be suppoeted with CUCM or VCS ?

    please your answers are very important for me

    thanks

  • RELEVANCY SCORE 2.41

    DB:2.41:Cucm Adding Presence Server zk



    Hi, I'm trying to add a CUPs server as an application server in a CUCM (V6.01). Normally I would see under systemapplication servercisco unified presence server, however instead I see 'typeAppServer.App_Server_EPAS'.

    I believe EPAS was an old name for CUPs, could the CUCM code be either corrupt or beta or is something else missing ? The version of Cups I wish to add is 6.x.thanks..Jag

  • RELEVANCY SCORE 2.40

    DB:2.40:Call Routing Between Cucm 6 And Ms Lync Question j7



    Hi All,

    I have a SIP trunk configured between CUCM and Lync and I need add configuration to make it possible for CUCM to route external calls for Lync.  The issue which I am encountering is when Lync sends its digits to CUCM it as a “+” in front of them but I believe CUCM is having trouble processing them because the digits begin with “+”.  What do I need to do to transform the digits sent from to Lync to strip out the “+” and make the digits conform so that CUCM can route the call properly.

    Some example or a brief step by step for how to make this happen would be greatly appreciated.

    Thanks in advance,

    Adil

    DB:2.40:Call Routing Between Cucm 6 And Ms Lync Question j7


    Chris is correct; CUCM 6.x did not support the plus character. You can either have Lync strip it (unlikely), run it through a SBC such as CUBE before it gets to CUCM, or upgrade CUCM to 7.1+. Note that 6.0 reached end of software support on May 1st, 2012. If you intend to keep that system in production it is really time to upgrade.

    Please remember to rate helpful responses and identify helpful or correct answers.

  • RELEVANCY SCORE 2.40

    DB:2.40:Cucm And Uccx 8.5 Cluster Ip Addresses Change dc



    Dear Networkers,

    We do have CUCM cluster and UCCX cluster v8.5 installed on UCS as follows:

    - 1x CUCM Publisher 172.16.100.11

    - 1x CUCM Subscriber 172.16.100.12

    - 1x UCCX Publisher 172.16.100.13

    - 1x UCCX Subscriber 172.16.100.14

    we are planning to migrate the ip addresses of the 4 servers to another vlan as follows

    - 1x CUCM Publisher 172.16.101.11

    - 1x CUCM Subscriber 172.16.101.12

    - 1x UCCX Publisher 172.16.101.13

    - 1x UCCX Subscriber 172.16.101.14

    Is there any order to follow ? I know that such action may result in DB replications issues for CUCM and UCCX clusters, is there any order that should be followed ? should we start with CUCM cluster or UCCX cluster ? we need to change the defaut gateway also.. there are many changes and we're really confused . Can you plaese advice?

    Thanks in advance.

    Best Regards.

    DB:2.40:Cucm And Uccx 8.5 Cluster Ip Addresses Change dc


    Hi,

    You can change the CUCM clusters ip first and than the UCCX cluster's ip addresses.

    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_5_1/ipchange/ipchg851.html

    Once you change the CUCM ip, run the below UCCX CLI commands,

    and restart of the engine and of the Cisco tomcat service.

    set uccx provider ip axl

    set uccx provider ip jtapi

    set uccx provider ip rmcm

    Remember to specify all CUCM ip addresses that are part of the cluster.

    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/configuration/guide/uccx851cli.pdf

    You can refer the below thread,

    https://supportforums.cisco.com/thread/2147128

    Once you current UCCX is working fine with the new CUCM ip addresses, than go ahead and change the UCCX cluster ip addresses.

    Hope this helps,

    Anand

    Please rate helpful posts !!

  • RELEVANCY SCORE 2.40

    DB:2.40:Smartnet For Cucm 6 And Unity Connection ma



    Hello,

    I'm preparing for an service order from Cisco, but I cannot find SMARTNET for these items:

    - UNIFIED-CM-6.1

    - LIC-CM6.1-7816=

    - UNITYCN8-USR

    Any idea???

    DB:2.40:Smartnet For Cucm 6 And Unity Connection ma


    Hi there,

    Part of the problem here may be related to the EoL (End of Life) for

    CUCM 6.1

    End-of-Sale and End-of-Life Announcement for the Cisco Unified Communications Manager Version 6.1

    End of New Service Attachment Date: HW, App. SW
    For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
    September 3, 2011

    http://www.cisco.com/en/US/prod/voicesw/ps6788/vcallcon/ps556/end_of_life_notice_c51-589088.html

    You don't mention the exact MCS-7816 model but many have been EoL as well

    Here is an example;

    End-of-Sale and End-of-Life Announcement for the Cisco MCS 7816-H3 Media Convergence Servers

    End of New Service Attachment Date: HW
    For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.
    July 24, 2010

    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/end_of_life_notice_c51-519083.html

    I'm no expert on smartnet but I believe you'll find the CUC stuff under "ESW" support.

    Cheers!

    Rob

  • RELEVANCY SCORE 2.40

    DB:2.40:Lost Cucm 6 Node Licence File. 38



    Hi

    I recently installed CUCM 6 Publisher and also uplaoded 5000 Units for devices.

    i am going to Install CUCM subscriber but i have only 1 Unit for Node and i don't have another file for licence.

    I lost the licence file during delivery and now i need that licence file  how i can recover my licence file to add new node in a cluster because i need Node Licence file to add subscriber.

    Please advice me how i can resolve this issue.

    DB:2.40:Lost Cucm 6 Node Licence File. 38

    Thank you for your posting and interest in the Cisco Support Community.  For best practices on posting documents in this community you can refer to

    https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions.

    For technical questions related to a Cisco Product or Technology, we encourage you to post on the Network Professionals Forum (NetPro).

    For your specific question, you can go to IP Telephony Forum.

  • RELEVANCY SCORE 2.40

    DB:2.40:H323 Names Between Cucm sk



    I`ve set up a H323 GW CUCMA going to the Nortel and get names in both directions .I repoint the session target in the Voip Dial-peer to another CUCM 6  CUCM B

    Calling from CUCM A to CUCM B, the display on CUCM A phone shows the ringing phone, Phone B shows the orginating name- on connecition names still show

    CUCM B calls CUCM A, the user at B does not see any names only DN but CUCM A the user A can see CUCM B details

    CUCM B GW settings !voice service pots!voice service voip qsig decode allow-connections h323 to h323 fax protocol cisco h323  h225 timeout t302 4  h225 timeout ntf 1000

    h225 display-ie ccm-compatible!

    interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-qsig isdn protocol-emulate network isdn incoming-voice voice isdn supp-service name calling profile Network-Extension operation-value-tag local no cdp enable!

    I can see the name being sent using  in Q931

    CUCM-ACUCM GWH323Q SIG GWH323-ACLOUD GWH323-BQSIG CUCM GWH323CUCM-B

    If I point the voip dial-Peer in  GWH323-A to another GWH323 C which connects to an TDM system then names are good in both directions. I done testing between CUCM and Nortel and Siemens and names are good but between CUCM failing.

    i`m running c2800nm-ipvoicek9-mz.124-24.T3.bin

    Any ideas, what debugs can I run to check  where the names drop

    I`ve attached some debugs

    Final Router is ay CUCM B - when CUCM A calls CUCM B

    Calling CUCM B to cucm  A- you see the name SMITH being sent to GWH323-A but do not see it futher on

    FInal router at CUCM B- last router at CUCM B when CUCM A calls - yo usee the name Pompeo- all ok

    The configuration on the GWH323 A, B are the same , we only can change the CUCM H323 GW`s 

    I`ve enabled  IE display at CUCM B CUCM page

    What  is the best debug to check names- I was running DEBUG 225 EVENT, Q931- the presentation is set for allowed, since if I call the TDM at GWH323-C i can see names when CUCM B calls .

     

    Are there any commends I`ve missing?

    thanks

    DB:2.40:H323 Names Between Cucm sk


    I`ve set up a H323 GW CUCMA going to the Nortel and get names in both directions .I repoint the session target in the Voip Dial-peer to another CUCM 6  CUCM B

    Calling from CUCM A to CUCM B, the display on CUCM A phone shows the ringing phone, Phone B shows the orginating name- on connecition names still show

    CUCM B calls CUCM A, the user at B does not see any names only DN but CUCM A the user A can see CUCM B details

    CUCM B GW settings !voice service pots!voice service voip qsig decode allow-connections h323 to h323 fax protocol cisco h323  h225 timeout t302 4  h225 timeout ntf 1000

    h225 display-ie ccm-compatible!

    interface Serial0/0/0:15 no ip address encapsulation hdlc isdn switch-type primary-qsig isdn protocol-emulate network isdn incoming-voice voice isdn supp-service name calling profile Network-Extension operation-value-tag local no cdp enable!

    I can see the name being sent using  in Q931

    CUCM-ACUCM GWH323Q SIG GWH323-ACLOUD GWH323-BQSIG CUCM GWH323CUCM-B

    If I point the voip dial-Peer in  GWH323-A to another GWH323 C which connects to an TDM system then names are good in both directions. I done testing between CUCM and Nortel and Siemens and names are good but between CUCM failing.

    i`m running c2800nm-ipvoicek9-mz.124-24.T3.bin

    Any ideas, what debugs can I run to check  where the names drop

    I`ve attached some debugs

    Final Router is ay CUCM B - when CUCM A calls CUCM B

    Calling CUCM B to cucm  A- you see the name SMITH being sent to GWH323-A but do not see it futher on

    FInal router at CUCM B- last router at CUCM B when CUCM A calls - yo usee the name Pompeo- all ok

    The configuration on the GWH323 A, B are the same , we only can change the CUCM H323 GW`s 

    I`ve enabled  IE display at CUCM B CUCM page

    What  is the best debug to check names- I was running DEBUG 225 EVENT, Q931- the presentation is set for allowed, since if I call the TDM at GWH323-C i can see names when CUCM B calls .

     

    Are there any commends I`ve missing?

    thanks

  • RELEVANCY SCORE 2.40

    DB:2.40:Oracle Specials..........? 1m


    Hi,
    Just i want knowledge about Oracle Specials
    any documentation for Oracle specials

    DB:2.40:Oracle Specials..........? 1m

    Start from here
    http://www.oracle.com/technology/products/spatial/index.html
    Aman....

  • RELEVANCY SCORE 2.39

    DB:2.39:Transcoder Question Cucm 6 c3



    I see from RTMT that TranscoderResourceAvaible is 6

    Is it possible increase this number?

    DB:2.39:Transcoder Question Cucm 6 c3


    I understand the procedure of configuration XCODERS.

    How many XCODERs can configure on CUCM, as I understand this XCODERs are used by MRGL - Device Pools.. so only 1 XCODER can work at a time?

    An other question: to configurate fault tolerance should I configure second XCODER?

  • RELEVANCY SCORE 2.39

    DB:2.39:Comparing Cucm 6.X Versus Cucm 7.X js



    I am looking for a document comparing two major versions and a guidelines (pros and cons) as to why a customer who has 4.x would upgrade to 7 instead of 6 or vice versa

    thanks

    DB:2.39:Comparing Cucm 6.X Versus Cucm 7.X js


    Hi Jhun,

    It's on the way my friend

    Cheers!

    Rob

  • RELEVANCY SCORE 2.39

    DB:2.39:Corporate Directory Cucm 7.X- Ideas For Multi Tenant Solution cj



    Hello,

    We have One Call Manager Cluster setup with several different customers. We would like to allow customers to search for users inside of only their Company. Is anyone doing this on CUCM 6/7?

    Thanks

    DB:2.39:Corporate Directory Cucm 7.X- Ideas For Multi Tenant Solution cj


    Ccharlebois,

    I do not have any experience with Java, but i am interested in the method you talked about.

    I am curious, how is your application aware of the User ID of the phone making the query?

    Phone Device--- Associated to User,

    Then only query other users with the same Department field?

    MD

  • RELEVANCY SCORE 2.39

    DB:2.39:Land Specials 1a



    Looking for a bargain?

    We're currently running specials for new tenants - pay 3 weeks, get 1 week free rent!

    Also - weekly specials on select sims - pay 2 wks, get 1 free OR pay 4 wks, get 2 free!!

    Contact Moonstone Nightfire for details

    DB:2.39:Land Specials 1a


    Looking for a bargain?

    We're currently running specials for new tenants - pay 3 weeks, get 1 week free rent!

    Also - weekly specials on select sims - pay 2 wks, get 1 free OR pay 4 wks, get 2 free!!

    Contact Moonstone Nightfire for details

  • RELEVANCY SCORE 2.39

    DB:2.39:Cucm / Cup / Cuc 10.5 Not Compatible With Ucs C210m ? 7j



    Hi Community.

    As I see in the Compatibility Matrix the UCS C210M is not listed under CUCM / CUP / CUC 10.5.

    What does that mean the installation will fail? We're using the CUCM / CUP / CUC for our own little office (6 Phones) and using now CUCM / CUP / CUC 8.5. We don't need much CPU Power and Memory with just 6 Phones.

    Does someone know why the UCS C210M is not on the Compatibility Matrix for CUCM / CUP / CUC 10.5.

     

    Thanks and best regards Patrick

    DB:2.39:Cucm / Cup / Cuc 10.5 Not Compatible With Ucs C210m ? 7j


    http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#UC_on_UCS_Tested_Reference_Configurations

  • RELEVANCY SCORE 2.39

    DB:2.39:Cucm 5.1.3 To 8.6.2 Upgrade f9



    Hello,

    I have to do an upgrade of a 3-node cluster CUCM 5.1.3d (5.1.3.5000-3) to 8.6.2. Hardware will remain the same. The servers support 8.6.2.

    I have two questions:

    - The upgrade path that I've chosen is: 5.1.3d (5.1.3.5000-3) - 6.1.4a (6.1.4.2000-2) - 8.6.2a (8.6.2.20000-2). I have already downloaded the upgrade images from Cisco site, but what concerns me is this paragraph from the 6.1.4a upgrade release notes:

    Caution

    Use the ISO files that are mentioned in the

    “Upgrading to Unified CM Release 6.1(4a) by Using the UCSInstall File” section on page 5 for upgrades from 6.1(1x) and later.

    Upgrading to Unified CM 6.1(4a) from Unified CM 4.x and 5.x

    Product Upgrade Tool (PUT) orthe PUT for registered customers only to obtain a media kit and license or purchase the upgrade from Cisco Sales.
    
    Is this really the case? Will i not be able to upgrade from 5.1 to 6.1.4a using this media?

    - I have an idea for "optimizing" the upgrade procedure. Because the standard approach would be to execute two separate upgrade procedures for 3 servers, this could take a lot of time. I was thinking of doing this:

    1. Take a backup of the current CUCM 5.1.3d

    2. Install CUCM 5.1.3d on a virtual machine and restore the backup

    3. Upgrade the VM to 6.1.4a

    4. Upgrade the VM to 8.6.2a

    5. Take a backup of the VM CUCM 8.6.2a

    6. Take one of the subscribers and do a clean install of a Publisher CUCM 8.6.2a (same hostname, IP, etc as the real publisher)

    7. Restore the backup from the VM to the new publisher

    8. Reseat the license on the new publisher

    9. Switch the old publisher with the new one and let all phones upgrade and re-register

    10. Reinstall the other 2 nodes as subscribers to the new 8.6.2a cluster.

    

    This is much easier to me because i can execute all updates in a non-production environment with zero risk. Only when everything is verified working will an actual migration take place. Then installing two subscribers is peace of cake and can be done even in business hours.

    

    Any ideas what could go wrong?

  • RELEVANCY SCORE 2.38

    DB:2.38:"Early Bird Specials" For The Mlb z7


    Was directed by an email that I received from "comcast delivery" to go to url:www.comcast.net/sports to get information on "Early Bird Specials" for the MLB. There is nothing on the site that your email directs us to about this.

    DB:2.38:"Early Bird Specials" For The Mlb z7

    jsh118 wrote: Was directed by an email that I received from "comcast delivery" to go towww.comcast.net/sports to get information on "Early Bird Specials" for the MLB. There is nothing on the site that your email directs us to about this.
    (Fixed that link for you)

    Agreed. There's nothing about any specials there.

    mady




    Honi soit qui mal y pense

  • RELEVANCY SCORE 2.38

    DB:2.38:Cucm 6.X - 7945, 65, 75 zd



    Anyone know when they plan on incorporating these phones into Call Manager for device type selection? Is there any articles on recommended selections on how these will work with CUCM 6.X now? I am most concerned about the 65 as it's colors opposed to the 61?

    DB:2.38:Cucm 6.X - 7945, 65, 75 zd


    On another note I turned on auto-registration it actually loaded the phone as a 7975 with the appropriate load. Although I still can't find anywhre in the UI within the device add page and the default load information page that makes mention of the 5 seris.

  • RELEVANCY SCORE 2.38

    DB:2.38:Estimating Drs Backup Requirement Cucm 6.X 9f



    New versions of CUCM have a feature that allows one to estimate the size requirements of a DRS backup:

    DRS Backup Manual Backup Estimate Size

    How can I estimate the directory size requirement for a CUCM 6.x cluster with 1 Pub / 2 Subs and  with just several hundred registered devices?

    Thanks,

    Amir

  • RELEVANCY SCORE 2.38

    DB:2.38:Cucm 7.1.5 Not Showing 6945 Icon k8



    Hi Cisco Expert

    I have one cucm version 7.1.5.20000-6. I just enable 6945 firmware for this cucm by using 6945 enabler. I have a problem because my cucm was not appear the 6945 icon when i view under DevicePhone. May i know why the thing happen?

    DB:2.38:Cucm 7.1.5 Not Showing 6945 Icon k8


    Hi Chris

     

    Thanks for the info..actually i already update the device package but it still same.The icon not showing up..Do i need upgrade the server itself? If yes which version i should upgrade.

    It is because i have a see this version UCSInstall_UCOS_7.1.5.35901-1.sgn.iso which is full restricted with full encryption and UCSInstall_UCOS_UNRST_7.1.5.35901-1.sgn.iso which is unrestricted with fewer encryption. 

     

    Which one i need to use? what the different?

  • RELEVANCY SCORE 2.38

    DB:2.38:Can Anyone Help Me Download Sccp69xx.9-2-2-6-Es1 For Cucm 7.1.5 ac



    Can anyone help me download SCCP69xx.9-2-2-6-ES1 for CUCM 7.1.5

  • RELEVANCY SCORE 2.38

    DB:2.38:Upgrade Firmware For Phones In Cucm pa



    Hi all, Im trying to find the place where I would go upgrade the firmware for the phones registered to CUCM 6.x system. Ive downloaded a device pack, but I cant seem to find where to put it. Anyone know how to get there? Thanks.

    DB:2.38:Upgrade Firmware For Phones In Cucm pa


    Hope the link does not break:

    http://tools.cisco.com/support/downloads/go/ReleaseType.x?optPlat=isPlatform=Ymdfid=280968161sftType=Unified+Communications+Manager%2FCallManager+Device+PackagestreeName=Voice+and+Unified+CommunicationsmodelName=Cisco+Unified+Communications+Manager+Version+6.0mdfLevel=Software%20Version/OptiontreeMdfId=278875240modifmdfid=nullimname=hybrid=Yimst=N

    if it breaks go to download page and follow this path:

    Voice and Unified Communications Cisco Unified Communications Manager Version 6.0 Unified Communications Manager/CallManager Device Packages

    HTH

    javalenc

    if this helps, please rate

  • RELEVANCY SCORE 2.37

    DB:2.37:Windows Server 2012 Optimale Festplatteneinteilung. 9m


    Hallo!
    Ich plane einen neuen Server (HP DL380 G6 mit 32GB Ram, 8x 146GB Festplatten und Raid 6). Darauf soll VMware vSphere Hypervisor, und dann 1x Windows Server 2012 Essentials (Hauptserver), 1x Windows Server 2012 Standard (Webserver) und Ubuntu Server 12.04
    (Webserver).
    Ist es heutzutage und mit meiner Vorgabe noch sinnvoll 2 (oder mehr) Festplatten für die Windows Maschinen zu machen, oder sollte ich besser je nur 1 Platte machen?
    Geplanmt hätte ich:
    * Essentials: 1x 60GB und alles was noch da ist für die 2. Platte. Das ist der Hauptserver. Mailserver, Fileserver, diverse Programme, MySQL und ein paar Webseiten.
    * Standard: 1x 32GB und 1x 62GB. Das ist ein reiner Webserver. MySQL, ein paar Webseiten (speziell .NET).
    * Ubuntu: 1x 100 GB. Das ist ein reiner Webserver. MySQL, ein paar Webseiten (speziell PHP).
    Danke für Eure Tips,
    Christian.

  • RELEVANCY SCORE 2.37

    DB:2.37:Guide How To Change Ip Address On Cucm Version 6 a7



    Could somebody provide me the blueprint for how I can change IP address on CUCM version 6

    Thank you !

    DB:2.37:Guide How To Change Ip Address On Cucm Version 6 a7


    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/install/6_1_1/ipchange/ipchg611.html

    Also, Change IP + Hostname Doc:

    http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucm/install/6_1_2/ipchange/ipchg612.html

  • RELEVANCY SCORE 2.37

    DB:2.37:Cucm 6.X With Panasonic Td500 mc



    Hi everybody, i have to realize a integration between CUCM 6 and Panasonic TD500 , someone have experience in this kind of integration for help.

    thanks a lot.

    DB:2.37:Cucm 6.X With Panasonic Td500 mc


    In the PBX i have Pri30 cards where put the E1.

    The PBX is used for the call center and its interacts with the CM.

  • RELEVANCY SCORE 2.37

    DB:2.37:Hot Pre-Order Specials!! 8j



    Hi Ps3 AUS Fans,

    T****T is having pre-order specials for November arrivals.

    Assassin's Creed: Brotherhood $89 arrives 8/11/10

    Call of Duty Black Ops $95 arrives 9/11/10

    Need for Speed: Hot pursuit $79 arrives 18/11/10

    Gran Turismo 5 $95 arrives 4/11/10

    Active 2 $129 arrives 18/11/10

    Thx,

    Cc

    DB:2.37:Hot Pre-Order Specials!! 8j


    Ozgameshop.com is selling games cheaper and offer free delivery.

    Can you tell me what places,you have seen games at a cheaper price?

  • RELEVANCY SCORE 2.37

    DB:2.37:Preguntas Frecuentes Acerca De Cucm 77



    Preguntas Frecuentes acerca de CUCM

  • RELEVANCY SCORE 2.37

    DB:2.37:Password Change Cucm 6 And Unity 5 9z



    For security reasons, I need to change passwords in callmanger 6 and Unity 7. I can't find a good document on these versions. Anyone made this change?

    DB:2.37:Password Change Cucm 6 And Unity 5 9z


    Hi Johnny,

    You are most welcome my friend! We don't run Unity 7.x so I can't tell you for sure about the UnitySFTP account.(sorry)

    The other references should carry over. I'll see what I can track down about the missing link here.

    Cheers!

    Rob

  • RELEVANCY SCORE 2.37

    DB:2.37:Cucm 6.1.2 Su1 37



    A service update for CM 6.1.2 has been released and available for download.

    The version no is 6.1.2.1001-4.

    Does CM6.1.2 SU1 include all fixes in Engineering specials considering the ES version nos are higher? If not what's the purpose is the SU??

    The documentation needs to be clearer, especially when new stuff is introduced.

    Come on Cisco -- make our lives easier.

    DB:2.37:Cucm 6.1.2 Su1 37


    6.1(2)su1 includes fixes for

    CSCso96280 and CSCsu38644 only as stated in readme file.

    Those bugs were critical thats why it was released.

    Readme file is here:

    http://www.cisco.com/web/software/282074295/23265/cucm-readme-612su1.pdf

  • RELEVANCY SCORE 2.37

    DB:2.37:Softphone For Cucm 6? sc



    I have a client running CUCM 6.1.1.2000-3 and they're interested in setting up softphones.  I can't seem to find any info on this.  I got the softphone software but that seems to only go up to CUCM version 4.

    Is there a new option for higher versions of CUCM?  What's the install procedure?  What are the licensing concerns?

    Any help would be greatly appreciated.

    G

    DB:2.37:Softphone For Cucm 6? sc


    Don't forget about QoS with soft phones. Most existing switch configurations clear the DSCP markings from the PC which will make your call best effort.

    You can either change your QoS design; or, use a TRP to remark the traffic.

    QoS SRND:

    http://www.cisco.com/en/US/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoSDesign.html

    Trusted Relay Points for QoS Enforcement:

    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmsys/a05media.html#wp1053888

  • RELEVANCY SCORE 2.37

    DB:2.37:Uploading A New Phone Load - Cucm 6 98



    Hello

    CUCM 6.0(1a)

    Where does one go about uploading a new phone load into the communications manager?

    I see the readme states to use the BAT, but I can't seem to find how. It's asking for a csv file, so I know I must be in the wrong place.

    Can someone please assist me?

    DB:2.37:Uploading A New Phone Load - Cucm 6 98


    hey Rob, that takes me to the OS Admin page, which is indeed where I need to upload the phone loads. However, the readme files with the phone loads must not reflect exactly how it's done on 6.x, cause the instructions don't match up.

    The TFTP Management section is what handles the phone loads, ring tones, yada yada.

    Now however, I'm tyring to figure out how 6.x processes the cop.sgn files. That's the only format that I can download for 7940/7960 sccp. The readme says it'll prompt for "install" after uploading and verifing the hash, mine sure doesn't. It's like all the readme's on that download page reflect how it's done in 5.x, even the ones that say "6.0" don't seem to be accurate. The items it says to click on aren't exactly the same, like rather that "Installs/Upgrades" I have to use the "TFTP Management" - maybe I'm missing something here. But I know for sure this 6.0(1a) is different from what the readme says.

  • RELEVANCY SCORE 2.36

    DB:2.36:Alcatel Pbx Integration With Cucm 6.0 1p



    Is there any documentation avialable to integrate Alcatel OMNIPCX Enterprise PBX with CUCM 6.x over QSIG(preferrably ESIG).

    Can i use the same documentation available for Alcatel 4400 PBX at Cisco.

    Thnks

    DB:2.36:Alcatel Pbx Integration With Cucm 6.0 1p


    Not sure what need to be configured on the Alcatel side, but from Cisco perspective it will be identical.

    Chris

  • RELEVANCY SCORE 2.36

    DB:2.36:Integration Cucm 6.X And Exchange 2010 d3



    Hello everybody,

    I plan to integrate Exchange 2010 UM with Callmanager 6.1 for voice mail, i want please to know :

      - If exchange 2010 is compatible CUCM 6.x

      - What about Exchange 2010 and CUCM 6.x MWI support, it work or not ?

    Regards

    Mohamed

    DB:2.36:Integration Cucm 6.X And Exchange 2010 d3


    thank you Joemar2 for your answer,

    I find a document for integration exchange 2010 as voice mail with CUCM 7, but not with a CUCM 6.x, did you have it or it's the same.

    Regards,

    Mohamed

  • RELEVANCY SCORE 2.36

    DB:2.36:Providing Bri Connections To Users xm



    Hi,

    I would like to find a solution to the following problem:

    We will be replacing a Siemens Hicom PBX (connected to the provider via PRI) with a a Cisco VoIP solution (1x 2801 Voice Gateway with 1x PRI, 2x CUCM). At the moment the old PBX is providing BRI connections to several users at the site. These BRI connections have numbers within the PRI number range.

    Can I accomplish this with the Cisco (or 3rd party) solution? Would be grateful for any advice!

    Ingo

    DB:2.36:Providing Bri Connections To Users xm


    There is an EVM cards with 4 BRI, plus 4 more on a daughtercard. It also gives you 8 FXS.

    That plus 6x  BRI (on 3x VIC2s) would at least give you 14 BRIs on a 2811, not too bad.

  • RELEVANCY SCORE 2.36

    DB:2.36:Unadvertised Specials - Best Buy: Unboxed mc


    In the market for a new TV, but don’t want to brave the crowds this Thanksgiving weekend? Well, you may just be in luck! BestBuy.com is currently featuring a number of unadvertised specials for select Panasonic TV models:www.bestbuy.com/PanasonicBFPricingThese “Black Friday” prices are only valid between 11/25/2009 and 11/30/2009, so make sure to check them out before they’re gone!

    DB:2.36:Unadvertised Specials - Best Buy: Unboxed mc

    In the market for a new TV, but don’t want to brave the crowds this Thanksgiving weekend? Well, you may just be in luck! BestBuy.com is currently featuring a number of unadvertised specials for select Panasonic TV models:www.bestbuy.com/PanasonicBFPricingThese “Black Friday” prices are only valid between 11/25/2009 and 11/30/2009, so make sure to check them out before they’re gone!

  • RELEVANCY SCORE 2.36

    DB:2.36:Shutdown Exchange 2010 Dag Cluster z7


    Hi,

    We need to shutdown our exchange environment du to extensive maintenance on power and core switching.
    I was just wondering if there is a proceeding to follow in shutting down the environment.
    we have:

    Datacenter 1: 1x edge, 1x hub, 1x cas, 1x passive MBX

    Datacenter 2: 1x edge, 1x hub, 1x cas, 2x passive MBX, 3x Active MBX
    Datacenter 3 (FR): 1x hub/cas, 1x active MBX
    DC 1 and DC 2 will go down. DC3 will be unreachable for some time.
    All in DAG and Cluster
    thx

    DB:2.36:Shutdown Exchange 2010 Dag Cluster z7

    I am planning this:

    1. Shut down the Edge servers.

    2. Shut down the CAS/HUB servers

    3. Move all databases to one MBX server - Use the -lossless switch. ( This ensures it moves only if all logs are up to date)

    4. Dismount all databases (this will allow replication to catch up as there will be no new logs generated.)

    Dismount the databases either from EMC (Exchange management console) or EMS (Exchange management shell).
    From EMS user can use Get-MailboxDatabase | Dismount-Databases -Confirm:$False to make sure that they will not switch-over to another node.

    5. Shut down the passive (no active databases) MBX servers

    6. Shut down the other MBX servers

    7. Shut down the File Share Witness.
    Bring it up in reversed order.

  • RELEVANCY SCORE 2.36

    DB:2.36:What Licenses Are Needed To Have Cucm Not In Demo But For Lab pm



    I am trying to build a lab with new versions of CUCM 9.1

    I do not want to use demo versions for 60 days nor request a temp license for 6 months.

    what is the minimum licenses i will need to have CUCM in full production mode for Lab somulation and with the least cost?

    DB:2.36:What Licenses Are Needed To Have Cucm Not In Demo But For Lab pm


    Hi Israel.NFR ( Not For Resale) is a special Kit for Cisco partner only intended for internal use and it includes both installation software and license and, if you need, also hardware.HTHRegardsCarloSent from Cisco Technical Support iPhone App

  • RELEVANCY SCORE 2.36

    DB:2.36:How Do You Design A Small Call Center Like This? 9d



    I want to build a 40 agents call center for my company. I think I need those devices that are:

    1, 2X MCS 7816 for CUCM, CUCM 8.6;

    2, 1X MCS 7816 for UCCX, UCCX 8.6;

    3, 40X 7945 IP PHONE(or 40 PCs with CIPC);

    4, 40 headsets;

    5, Cisco router 2921, PVDM3-64, VWIC2-1MFT-E1.

    I am not sure of my design.

    DB:2.36:How Do You Design A Small Call Center Like This? 9d


    Hi Lou,

    If you are referencing to Real Time Reporting and Historical Reportign from UCCX perspective, "Yes" it is availbale with both the type of UCCX integrations with CUCM or CUCME.

    Adding to GP's note, in case if you go with UCCX\CUCME deployment, there wont ab any upgrade paths available to come to UCCX 9.0 with CUCM, you need to bring the UCCX 9.0 system manually.

    Hope it helps.

    Anand

    Please rate helpful posts !!

  • RELEVANCY SCORE 2.36

    DB:2.36:Cucm 6.X Ad Integration - Modify Ldap Field Mappings ma



    Hello,

    Does anyone know if it is possible to map the CUCM 6.x field 'User ID' to the AD field 'telephoneNumber' instead of 'sAMAccountName'?

    This change would speed up the login procedure for Extension Mobility users as our AD usernames are 10 characters long.

  • RELEVANCY SCORE 2.36

    DB:2.36:Cucm 6 Hardware 8a



    To install CUCM 6.0, is any server which meets minimum requirements ( 2GB RAM for example) sufficient or do we still need to go for Cisco approved servers only like in 4x versions?

    DB:2.36:Cucm 6 Hardware 8a


    Steffen,

    Thanks a lot for your support. Wish you a very merry Christmas in advance.

  • RELEVANCY SCORE 2.36

    DB:2.36:Ucl License For Telepresence fx



    Hi Team,

    I have one question about UCL license for CTS-XXXX.

    The result of configuration of UCL for CTS-3010 is as following.

    CUCM-USR-LIC-ADD        1

    LIC-TP-MULT-SRN         1

    EXIST-DEPL-UNDER1K      1

    include CUCM-PAK        1

    include CUCM-USR        6

    6 CUCM-USRs are license for CTS-3010, is this correct number?

    I think Telepresence require 11 DLUs (5 DLUs are for 7975 w/Telepresence, 6 DLUs are for codec).

    Thanks.

    Yohei Hashiride

    DB:2.36:Ucl License For Telepresence fx


    You are correct
    11 DLUs per room:6 for the TelePresence and 5 for the 7975 IP Phone

  • RELEVANCY SCORE 2.36

    DB:2.36:No More Specials kd



    How about a fair, flat price for "CLEARLY" posted services. The specials are great, but it's a marketing ploy to get people in the door. Then they end. That's when the confusion begins.

    "Sorry. We don't have anything to offer you at this time with your same services." "We can upgrade you for $40 more plus taxes and fees plus free HBO or something for 6 months". Almost as if they want us to call and complain.

    Either way the bill will be more. Sound familiar?

    Just try to find the regular price for this stuff on their website. I called them once and asked them where can I find the regular price list for their services on their site and they couldn't find it either. Cuz it's not there. ..lol

    Thier business model is smoke and mirrors. I'm convinced and serious about this.

    And forget about having a problem with your service. Have a bad modem? They'll send out another and charge you $10 for it. But it'll take 3 phone calls and 2 months at least to have that charge off your bill. By then the bill will somehow be higher anyway.

    I can go on and on here people, but I'm sure those who are reading this know what I'm talking about. A comcast forum? Why would anyone want to be on here? lol

    DB:2.36:No More Specials kd


    How about a fair, flat price for "CLEARLY" posted services. The specials are great, but it's a marketing ploy to get people in the door. Then they end. That's when the confusion begins.

    "Sorry. We don't have anything to offer you at this time with your same services." "We can upgrade you for $40 more plus taxes and fees plus free HBO or something for 6 months". Almost as if they want us to call and complain.

    Either way the bill will be more. Sound familiar?

    Just try to find the regular price for this stuff on their website. I called them once and asked them where can I find the regular price list for their services on their site and they couldn't find it either. Cuz it's not there. ..lol

    Thier business model is smoke and mirrors. I'm convinced and serious about this.

    And forget about having a problem with your service. Have a bad modem? They'll send out another and charge you $10 for it. But it'll take 3 phone calls and 2 months at least to have that charge off your bill. By then the bill will somehow be higher anyway.

    I can go on and on here people, but I'm sure those who are reading this know what I'm talking about. A comcast forum? Why would anyone want to be on here? lol

  • RELEVANCY SCORE 2.35

    DB:2.35:Call Monitoring In Cucm 9p



    can I listen to another person in CUCM 6 without 3rd party devices and software?

    DB:2.35:Call Monitoring In Cucm 9p


    But it will not be silent monitoring. Am I right?

    I don't uderstand why Cisco used Monitoring features in CUCM 6 but this features are not realized as everybody want.

    How helpful can be for me monitoring features in CUCM 6?

  • RELEVANCY SCORE 2.35

    DB:2.35:Support For Patch Update Cucm 8.0.3.24046-2 9d



    Hi All,

    We are running CUCM ver 8.0.3.22018-1, would like to perfrom patch update on my cluster with CUCM 8.0.3.24046-2 (ES). Just want  to understand what are the major changes been addressed on this ES version.

    and also what the changes in ICT and Phone's firmware versions if i update this patch my cluster.

    Appreciated your replys.

    Thanks

    Bala

    DB:2.35:Support For Patch Update Cucm 8.0.3.24046-2 9d


    GP, Thanks for your advise. Hopefully i will get a help from any one here who already installed this ES.

  • RELEVANCY SCORE 2.35

    DB:2.35:Cupc 6 Authentication aa



    I have a CUCM 6.1.4 Cluster and CUPS 6.0.7. My CUCM cluster is not setup for LDAP authentication. My CUPS users can log into CUPC using their CUCM End User credentials, however, when they change their password, I have to manually run the Sync Agent on the CUPS server for them to log in. Shouldn't the CUPS server sync with the CUCM automatically?

    Thanks in advance.

    DB:2.35:Cupc 6 Authentication aa


    I have a CUCM 6.1.4 Cluster and CUPS 6.0.7. My CUCM cluster is not setup for LDAP authentication. My CUPS users can log into CUPC using their CUCM End User credentials, however, when they change their password, I have to manually run the Sync Agent on the CUPS server for them to log in. Shouldn't the CUPS server sync with the CUCM automatically?

    Thanks in advance.

  • RELEVANCY SCORE 2.34

    DB:2.34:Host Names For Cucm 5 Or 6 z3



    Anyone know or remember when installing CUCM 5 or 6 if it accepts capital letters or small case or a combination when entering in the hostname?

    Thanks!

    DB:2.34:Host Names For Cucm 5 Or 6 z3


    "The host name can comprise up to 64 characters and can contain alphanumeric characters and hyphens"

    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/5_0/cmins504.html

    As already stated it does not support special characters.

  • RELEVANCY SCORE 2.34

    DB:2.34:Any Specials For Movie Packages? kj



    Are there any specials for movie packages..like Showtime, Cinemax, Starz? I already have HBO and am a "new customer" for 1 month now.

    DB:2.34:Any Specials For Movie Packages? kj


    Are there any specials for movie packages..like Showtime, Cinemax, Starz? I already have HBO and am a "new customer" for 1 month now.

  • RELEVANCY SCORE 2.34

    DB:2.34:The Boost Specials Collection pc



    From CC: "The Boost Specials Collection will be available on 360 and PlayStation 3 on Thursday 9th March...more details soon"

    I think the Carson Extreme Hotrod will be...... extreme.

    Great. More trophies and fun, but this is coming way to fast for me. I've only had 5 minutes for the Toy Collection so far.....




    --my other console is a magnavox odyssey 200

    DB:2.34:The Boost Specials Collection pc


    New twitter post by Matt W:

    The Boost Specials Collection will be available on 360 and PlayStation 3 on Thursday 12th March...more details soon

  • RELEVANCY SCORE 2.34

    DB:2.34:Lost Cucm 6 Node Licence File. fj



    Hi

    I recently installed CUCM 6 Publisher and also uplaoded 5000 Units for devices.

    i am going to Install CUCM subscriber but i have only 1 Unit for Node and i don't have another file for licence.

    I lost the licence file during delivery and now i need that licence file  how i can recover my licence file to add new node in a cluster because i need Node Licence file to add subscriber.

    Please advice me how i can resolve this issue.

    DB:2.34:Lost Cucm 6 Node Licence File. fj


    Jamil,

    Fortunately, Cisco can still generate a new license for you. You can work through TAC or you can send a message to licensing@cisco.com. They will want to know the Sales Order number which documents the fact you are entitled to the additional node license. The Cisco Sales Order number will be on the packing slip and it will be on the invoice from the vendor you purchased the equipment from. If you can't find it there, then you can talk to your Cisco AM or your partner AM. Either/both can get this information for you. With the Sales Order number, the MAC address of your publisher node, and brief explanation the Cisco licensing team should be able to send you a new license file.

    HTH.

    Regards,

    Bill

  • RELEVANCY SCORE 2.34

    DB:2.34:Boq For Cucm 8.5 With Bundled Ccx xz


    Hi there,

    I have devised a BOQ based on CUCM 8.5 with MCS server; and for using 5 CCX user I have added additional MCS server and appliance entitlement for CCX server. Below is the BOQ.
    Server software:

    Product
    Description
    Quantity
    CUCM-USR-LIC
    Top Level Sku For User License
    1
    LIC-CUCM-USR-A
    Unified Communications Manager Enhanced Single User-Under 1K
    50
    UCM-7816-85
    Unified Communications Manager 8.5 Server Software
    1
    CCX-85-CMBUNDLE-K9
    CCX 8.5 5 Seat CCX ENH CM Bundle - AVAILABLE ONLY FOR NEW CM
    1
    CUCM-PAK
    Include PAK Auto-expanding PAK for CUCM
    1
    CUCM-USR
    Include PAK Auto-expanding User for CUCM
    300
    UCM-7816-85-KIT
    CUCM 8.5 Media Kit
    1
    UCM-7816-NODE
    CUCM 7816 Node
    1
    Server for CUCM:
    MCS7816I5-K9-CMD2
    Unified CM 8.5 7816-I5 Appliance, 0 Seats
    1

    Server for CCX
    MCS7816I5-K9-CXA1
    CCX 8.5 7816-I5 Appliance 1x X3430 CPU, 4GB RAM, 1x250 HDD
    Appliance Entitlement for CCX server
    L-CCX-85-CMBLDLIC=
    CCX 8.5 CCX CM Bundle Appliance Entitlement, PAK eDelivery

    And 5 IP communicator license
    IPCOMM86-LIC
    Cisco IP Communicator 8.6 license

    I would like to know if I have not missed out anything in the above and BOQ is correct, this is basically a small requirement for call center where they only require to use 5 enhanced users.

    I have also heard that CISCO is now supporting more UCS server instead of MCS. Need advice on how to Map above requirement on UCS. Please recommend. I think it will save one MCS server if we got with UCS route.

    Best regards,
    Faisal Qadri

    DB:2.34:Boq For Cucm 8.5 With Bundled Ccx xz


    Yes you can use UCS. For this size install you could use a C200M2 chassis:

    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/solution_overview_c22-597556.html

    The rest of the guidelines are posted to the DocWiki:

    http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization

    The problems that stand out at frist glance:
    You have no ESW or UCSSYou have no public space or analog port license. No lobby/meeting room phones or fax machines?You have no router for PSTN connectivity or DSPfarm functionality.You are missing the DVDs for CCX (CCX-85-SRVRS-MEDIA)You are missing the OS license for CCX (L-CCX-85-BDL-ADDON)

  • RELEVANCY SCORE 2.34

    DB:2.34:Cucm 6 ,Access User Page pm



    Hello,

    On CUCM 6, when my users want to access the user page, they should type http://ipaddress/ccmuser, but in CUCM 4.1 i was redirectng just the ip address directly to this link so it was much easier for them to access the page. How can I do this in CUCM 6?

    DB:2.34:Cucm 6 ,Access User Page pm


    You need to access the user page at http://ipaddress/ccmuser.

  • RELEVANCY SCORE 2.34

    DB:2.34:Marketing Att Specials In Billing Emails k9


    Why does my ATT online bill encourage me to click on a link to see all their "specials" when I am not eligible for them because I am an existing customer? Lame answer from service rep: computer generates the emails automatically!

    DB:2.34:Marketing Att Specials In Billing Emails k9

    Zaylyn wrote:
    Why does my ATT online bill encourage me to click on a link to see all their "specials" when I am not eligible for them because I am an existing customer? Lame answer from service rep: computer generates the emails automatically!

    Sounds just like what ATT would do, be clueless at times. Very easy to program appropriate links that would apply to you, or delete the links for you.

    Chris
    __________________________________________________________

    Please NO SD stretch-o-vision or 480 SD HD Channels
    Need Help? PM ATTUverse Care (all service problems)
    ATT Customer Care(all other problems)
    Your Results May Vary, In My Humble Opinion
    I Call It Like I See It, Simply a U-verse user, nothing more

  • RELEVANCY SCORE 2.34

    DB:2.34:Bat For Cucm 8.0 c8



    Dear all NetPro gurus,

    I have a customer who has recently purchased a CallManager 8.0.

    However, they currently have 6 x links for IP Phone Services.  And the customer is using

    Extension Mobility.  The current list of IP Phone Services are:-

    Extension Mobility - Primary CUCM

    Extension Mobility - Secondary CUCM

    Corporate Directory - Primary CUCM

    Corporate Directory - Secondary CUCM

    Personal Directory - Primary CUCM

    Personal Directory - Secondary CUCM

    Since the customer is using Extension Mobility, the customer has the following enquiries:-

    1)  If using BAT, is there any way to get all the User Device Profiles to subscribe all of

    the 6 defined PHone Services instead of adding them one-by-one manually??

    2) If using BAT, is there any way to get all the SURL link to get assigned to each of the

    six Phone Services other than assigning them manually on each line at Device Profile

    page??

    Cheers,

    Hunt

    DB:2.34:Bat For Cucm 8.0 c8


    HI

    I Think that you must to create a Phone Button Template (PBT) for 9971 IP Phones.

    This PBT must be assigned to UDP Template and write the SURL on UDP in the corresponding field.

    Regards

  • RELEVANCY SCORE 2.33

    DB:2.33:Ldap Integration Cucm 6.X f3



    Where can I get detialed information how LDAP integration works in CUCM 6.x platform?

    We have the admin guide for the config. steps. However, our AD group wants to find out how the integration functionlity will work before creating users etc.

    DB:2.33:Ldap Integration Cucm 6.X f3


    Thanks. Trying to keep up with the changes.

  • RELEVANCY SCORE 2.33

    DB:2.33:Solution For Automatic Creation Meet-Me Conferences In Cucm Version 6 fc



    Can anybody advice me solution that could creat automatic Meet-me conferences in CUCM?

    Thank you!

    DB:2.33:Solution For Automatic Creation Meet-Me Conferences In Cucm Version 6 fc


    AFAIK no one has developed anything like this, you would need to send all the signaling as if you were an IP phone and do the same process via SCCP messages.

    Natively there is no wau to do this.

    HTH

    java

    If this helps, please rate

    www.cisco.com/go/pdihelpdesk

  • RELEVANCY SCORE 2.33

    DB:2.33:Url For Idle Services For Ip Phone In Cucm 6 sz



    I have loaded file cisco.xml into TFTP folder. It's a picture.

    Now I use url http://IP CUCM/cisco.xml

    but nothing work. Does this solution is the same like in Callmanager 4.1 or there is some difference?

    Thank you a lot!

    DB:2.33:Url For Idle Services For Ip Phone In Cucm 6 sz


    to add to what Stephan said...

    If you are CCM 3.x or 4.x you can place the file in C:\CiscoWebs\IPPhoneServices\CCMCIP directory and it automatically runs it through IIS.

    this doc has the procedure..

    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml

    If you have CCM 5.x or 6.x you would have to use a different webserver on a machine other than the CCM..

    JoeL

  • RELEVANCY SCORE 2.33

    DB:2.33:Where I Can Download Ip Phone Services For Cucm 6 8x



    WHERE I CAN DOWNLOAD IP PHONE SERVICES FOR CUCM 6. I had many ip phone services like big clock on phone desktop in Callmanager 4, can I adjust this task? What interesting and useful services I can use in CUCM 6?

    DB:2.33:Where I Can Download Ip Phone Services For Cucm 6 8x


    http://www.andtek.com/communications-products-freexml.html

    JoeL

  • RELEVANCY SCORE 2.33

    DB:2.33:Cucm 5 To Cucm 7 Upgrade jp



    Hello everyone,

    What are the necesary licenses that I need purchase for this upgrade?. The migration will be on new MCS7825.

    What is a Feature License?.

    Do I need migrate to a version 6 first?.

    Thanks.

    RJB

    DB:2.33:Cucm 5 To Cucm 7 Upgrade jp


    Hey Rafael,

    First off, you are always welcome my friend

    As far as CUCM 8.x goes, I would steer clear for now as these

    newest versions tend to be pretty buggy. Lets try to find the most

    stable 7.1(3) version first and let 8.x simmer for awhile before moving

    that direction.

    Cheers!

    Rob