• RELEVANCY SCORE 3.89

    DB:3.89:Problem Recording Mod Wheel 7d




    Dear All. i'm trying to record the mod wheel using my Oxygen8 controler. I'm recording it over a solo violin track (from Garritan PO). I can record it ok but when i play back I can't hear the violin! In Sonar or Cubase, which I am more used to, this is easy enough but I can't seem to do it properly in GB3. Help!

    Cheers, Maestro-C

    DB:3.89:Problem Recording Mod Wheel 7d

    Dear All. i'm trying to record the mod wheel using my Oxygen8 controler. I'm recording it over a solo violin track (from Garritan PO). I can record it ok but when i play back I can't hear the violin! In Sonar or Cubase, which I am more used to, this is easy enough but I can't seem to do it properly in GB3. Help!

    Cheers, Maestro-C

  • RELEVANCY SCORE 3.60

    DB:3.60:Mod Wheel In Exs24 x3




    Whenever I try to set the mod wheel to control something like resonance in EXS24, the samples (the included flute and clarinet sounds so far) become short and staccato-like without any sustain when I have the mod wheel up all the way. This problem also happens when I don't even have the mod wheel set to anything. Is the mod wheel automatically set to change samples or something else?

    DB:3.60:Mod Wheel In Exs24 x3

    Got it! Under "groups" in the instrument editor it lets me decide when I want to access the samples. I just have all the mod wheel values set to trigger the sustained flute sounds instead of the staccato at the half way point. Thanks again for your help!

  • RELEVANCY SCORE 3.13

    DB:3.13:Evolution Mk449c Mod Wheel Problem With Logic Pro/Vsl Performance Tool 87




    I'm using the latest version of Logic Pro on a new Intel Mac Pro. My controller keyboard is the Evolution MK449C, connected via a USB cable.

    When using a Logic Audio Instrument assigned to the ESX Sampler Plug-in (running various samples, mostly from the Vienna Symphonic Library,) Logic's Transport Window doesn't register any modulation information generated from my keyboard.
    As the VSL Performance Tool relies heavily on the Mod Wheel info to effect the sounds, I'm at a bit of a loss to spot the solution. When I assign a different conroller to the Mod Wheel, i.e. volume, pan, pitch bend, etc., I can see the info in the Transport Window with no problem, so I know the wheel itself is working okay.
    Has either Logic or the ESX got some kind of controller filter, - maybe I've accidently turned something on that cuts out any incoming modulation. Can anyone help?

    Thanks

    Mac Pro Mac OS X (10.4.8)

    DB:3.13:Evolution Mk449c Mod Wheel Problem With Logic Pro/Vsl Performance Tool 87

    I'm using the latest version of Logic Pro on a new Intel Mac Pro. My controller keyboard is the Evolution MK449C, connected via a USB cable.

    When using a Logic Audio Instrument assigned to the ESX Sampler Plug-in (running various samples, mostly from the Vienna Symphonic Library,) Logic's Transport Window doesn't register any modulation information generated from my keyboard.
    As the VSL Performance Tool relies heavily on the Mod Wheel info to effect the sounds, I'm at a bit of a loss to spot the solution. When I assign a different conroller to the Mod Wheel, i.e. volume, pan, pitch bend, etc., I can see the info in the Transport Window with no problem, so I know the wheel itself is working okay.
    Has either Logic or the ESX got some kind of controller filter, - maybe I've accidently turned something on that cuts out any incoming modulation. Can anyone help?

    Thanks

    Mac Pro Mac OS X (10.4.8)

  • RELEVANCY SCORE 3.09

    DB:3.09:Using Mod Wheel 7d


    In Garageband when I use mod wheel some instruments (like those in Symphonic Jam Pack) have different modes of playing. How to get this effect in Logic Express? It surely doesn't work the same way... :/

    DB:3.09:Using Mod Wheel 7d

    Since I got the same MIDI controller it should be easy from now on. Thanks and kudos for reply!

  • RELEVANCY SCORE 3.02

    DB:3.02:Bt Vision V2 Problems Finally Explained md


    Recording problems on New Look BT Vision

    Hi all

    We’re aware that New Look BT Vision has a software problem which affects stability and causes recordings to fail for some customers. We understand this is really frustrating, sorry for the inconvenience.

    The software in the New Look Vision Set Top Box is being affected by changes on the Freeview network including Digital switchover, channel moves, and channel re-names which cause one of the set top box tuners to lock and not respond when a recording is due to start.

    A reboot unlocks the tuner so if you turn the box off at the mains and switch it back on it will help to avoid these problems. The problem can reoccur later following another Freeview change.

    We know there are Freeview changes on 12th and 17th October that will cause this problem for some customers. This could affect any customer on our New Look BT Vision base. Each time a Freeview change is made, we see a spike in recording failures and crashes.

    We need to rollout new STB software. We have this software under test but cannot say yet when it will be deployed. Fixing this issue is the highest priority in BT Vision and the fix will be rolled out as soon as possible.

    Thanks

    Stuart
    BTCare Community Mod






    Solved!
    Go to Solution.

    DB:3.02:Bt Vision V2 Problems Finally Explained md


    Old thread pointless booting. There is a dedicated team looking after these forums. They do an excellent job!




    ________________________________________If you like a post, or want to say thanks for a helpful answer, click the white star. 1967 Plus RadioBT LifeKafka's World1000 Classical Hits

  • RELEVANCY SCORE 2.85

    DB:2.85:Stand Alone Pitchbend/Mod Wheel ? j9


    I love my current midi keyboard, but have no "wheels." I never needed them until GB2. =]

    Does anyone make a cheap usb standalone box with just the wheels? I know I can edit this info directly in the tracks, but having a the wheels would be great.

    -Morgan

    DB:2.85:Stand Alone Pitchbend/Mod Wheel ? j9

    Yes, it's cheaper to just buy a new keyboard, and it also saves you from using another USB slot.

  • RELEVANCY SCORE 2.83

    DB:2.83:Sound Audio Microphone Record Recording ma


    why after up date audio not working why????

    [Mod Comment, adding content from a duplicate thread]

    Sound Audio microphone record recording
    my sony vaioon 8/13/13 after update ,my laptop it no sound , no audio output device is installed ,I try down load software arealtekhight definition again on a ,sony web but not working why?????

    DB:2.83:Sound Audio Microphone Record Recording ma

    That's great, only it doesn't work for windows 8. Maybe they haven't got drivers for older sound cards for 8.

  • RELEVANCY SCORE 2.82

    DB:2.82:Cant Make Call- Problem With Recording Device 8f



    cant call problem with recording device

  • RELEVANCY SCORE 2.80

    DB:2.80:Mouse Wheel Cascading Programs Instead Of Dragging Them. z1


    original Title: Mouse wheel action
    Pressing my mouse wheel causes my program to cascade instead of dragging or panning like it is supposed to. How do you fix this problem?

    DB:2.80:Mouse Wheel Cascading Programs Instead Of Dragging Them. z1

    You do not provide much info for us to assist you. What make and model computer? What make and model mouse? What version of Windows 7?

    I'd suggest going to the Control Panel and open Mouse, check to see what is assigned as functions for your mouse.

  • RELEVANCY SCORE 2.78

    DB:2.78:Problem With Driving Force Gt Wheel 1c



    Having loaded GT5, I connected my wheel to my PS3. All the buttons on the wheel and both pedals work fine but there is no steering!

    I connected the wheel to my PC and ran the Logitech software - the light in the centre of the wheel came on and the wheel spun during calibration after which there was resistance when turning the wheel.

    Re-connected the wheel to the PS3 but again everything except steering.

    Can anyone suggest what I have missed please?

    Many thanks







    Solved!
    Go to solution

    DB:2.78:Problem With Driving Force Gt Wheel 1c


    Er... look at the post above yours. He fixed it.




  • RELEVANCY SCORE 2.75

    DB:2.75:Bug In Modifier Plugin 3z


    If you chose convert Mod wheel to Expression, no way to turn off, or remove plugin, it set Expression to zero.To get sound back you need resend Expression to plugin.

    DB:2.75:Bug In Modifier Plugin 3z

    If you chose convert Mod wheel to Expression, no way to turn off, or remove plugin, it set Expression to zero.To get sound back you need resend Expression to plugin.

  • RELEVANCY SCORE 2.75

    DB:2.75:Midi Keyboard Gets Random Delays cj


    I have an axiom61 that I use to play software instruments in Logic Pro. Everything is right on with no delay on any of the keys on the keyboard. However when I used the mod wheel or some of the pressure pads the delay is extremely noticeable and I have to reset the device get rid of the delay. Everytime I need to use that pads or mod wheel same thing. The weird thing is I have been using this keyboard for the same purpose for over a year now with no problems. Please help!

    DB:2.75:Midi Keyboard Gets Random Delays cj

    I have an axiom61 that I use to play software instruments in Logic Pro. Everything is right on with no delay on any of the keys on the keyboard. However when I used the mod wheel or some of the pressure pads the delay is extremely noticeable and I have to reset the device get rid of the delay. Everytime I need to use that pads or mod wheel same thing. The weird thing is I have been using this keyboard for the same purpose for over a year now with no problems. Please help!

  • RELEVANCY SCORE 2.75

    DB:2.75:Analogue Signal Pulse Count 19



    I am using CDAQ with a NI9229 4 Channel analgoue input card.

    I have a sensor that outputs an analogue 5v square wave signal. The pulses are triggered from eithe a north or south pole of a magnet. I have an aluminium wheel with 30 magnets, all magnets are in opposition to each other. when the wheel is rotated the output is a square wave.

    My magnet wheel is rotating at 182° per second. Over 360 degrees there is 30 magnets. Thus making the sensor switch 30 times.

    The time to revolve the wheel one revolution is 1.978 seconds.

    I have set up the NI9229 to the following

    - sampling rate is set to 25kS/s So to record the data for one revolution it works out as 49450 bits.

    - Have set the trigger levels for recording a hi or lo pulse to 2.7 and 0.7 volts.

    50000 samples would be two seconds worth of data which would be more than 360° of rotation of the magnet wheel.

    The problem I am having is that my pulse count changes between 30 and 31. But as I am only recording 1 revolution of data there is physically only 30 switches. Do you know why I am getting a change of 30 and 31.










    Attachments:







    pulse count 2.PNG ‏20 KB

    DB:2.75:Analogue Signal Pulse Count 19


    Ok thanks

    Thats ok as the CDAQ i am using uses a 9205, 9411 9474, 9229

    I will see what i can figure out today and get back to you.

  • RELEVANCY SCORE 2.75

    DB:2.75:Number Of Lines Wheel Advances Changes On Its Own 7j


    Hello Community,

    My recent computer issues began with first noticing that my mouse wheel changed from the two line scroll that I had it set at two 6 and then 19 lines each time I turned off the computer and then rebooted. I took my IBM ThinkPad w/ Windows 7 into the Microsoft
    Scottsdale, AZ store - since they say they have free virus removal and I thought a Microsoft store would be the most professional place to go for laptop repair. I got the laptop back on June 4, 2014. Anyway - they could not get rid of the virus but insisted
    it was a hard drive problem and I let them replace my hard drive. Yesterday July 23, 2014 the same wheel advancing problem started happening again. When this happened previously it was quickly followed by all sorts of strange things going on with the
    laptop and eventually screen freezes and the RealPlayer music videos began not working properly.

    Has anyone in the community experienced this change with the mouse wheel - that is the number of lines changing every time you reboot. Thanks to everyone for your response. I am fully familiar with how to change and apply new setting from the control panel
    for the mouse. I use a Microsoft Mobile Mouse Mod. 3500

    DB:2.75:Number Of Lines Wheel Advances Changes On Its Own 7j

    I did back up the date to a week earlier when the problem did not exist - and it is scrolling the set number of lines now - however realplayer now removes videos from the hard drive that are downloaded - without me removing them - Very strange - but
    this is identical to what happened before I took it to the Microsoft store and before they replaced the hard drive. It seems it is following the same routine as with the old hard drive - I don't see how this can be anything but a virus, I am careful but
    I suspect it arrived somehow through email. Does anyone have any suggestions? Thanks very much.

  • RELEVANCY SCORE 2.73

    DB:2.73:Mod Function Sometimes Returns Nan 3c



    My program has four subroutines that call MOD one or more times. I'm finding that the various MOD calls in the program will sometimes return NaN. Any ideas on how I could track if this is some problem on my end?

    I am only experiencing this on the 64bit platform (10.1.021). The 32bit build works without any problem.

    DOUBLEPRECISION RESULT,A,B
    B=360.0D0
    RESULT=MOD(A,B)

    If I replace the MOD call with

    RESULT=A-INT(A/B)*B

    I do not get a NaN result.

    I wrote out all the values used in the above MOD calculation to a file and wrote a simple program to read in the values and do a MOD on them. This simple program does not exhibit any problem with the MOD call.

    DB:2.73:Mod Function Sometimes Returns Nan 3c


    To answer your other question, since libmmd and msvcrt both provide "mod" routines with the same external name and same interface, if you have libmmd first then your C code will use libmmd's version and msvcrt's version will not be used since that name has already been resolved by libmmd.

  • RELEVANCY SCORE 2.70

    DB:2.70:Vengence K70 - Volume Wheel Problem (???) 7s


    Hi everyone,

  • RELEVANCY SCORE 2.70

    DB:2.70:Need Help With Problem Using Pitch Bend Wheel In Logic 8 78


    Hello,

    I just upgraded to Logic Studio to compose an upcoming film score with, and I've run into a problem. Previously I used GarageBand and the Symphony Orchestra Jam Pack with my 66-key M-Audio Keystation MIDI keyboard, using the pitch bend wheel for string crescendos and decrescendos. It's made a huge difference in lending more performance emotion to the piece. Logic 8 is an incredible improvement over Garageband, but for some reason the pitch bend wheel no longer works to control the volume/expression of the strings. This is also the case now with Garageband (even though it worked fine before installing Logic Studio). I did a lot of research to try to figure out why this is, and from the best I can tell, it seems like it has something to do with one of the MIDI controllers needing to be reassigned.

    The pitch bend wheel works fine to bend the pitch on other patches, but for the Symphony Orchestra Jam pack, it doesn't do anything.

    In case this helps, I tried recording with the pitch bend/expression wheel on one of the Symphony Orchestra string sounds in GarageBand, and although there's no difference in volume when I turn the wheel as I record, I do hear the expression once I rewind and listen to the recording. So apparently it's recording the signal (at least in Garageband), but somehow I can't hear it when I'm performing. I'm not sure if the same is true in Logic.

    Any help would be greatly appreciatedI need to use those sounds for the score, and I don't have too much time before I need to get started. Thanks!

    DB:2.70:Need Help With Problem Using Pitch Bend Wheel In Logic 8 78

    Open the symphony orch instruments in exs24, if they're currently simple garageband instruments just change the plugin to exs24 and it'll "promote" the instrument to the bigger sample player, and here you'll find you can adjust the pitch range and change a whole host of other parameters.

    That help?

    Steve

  • RELEVANCY SCORE 2.65

    DB:2.65:M60 Wheel Problem xk


    Hi : D

    DB:2.65:M60 Wheel Problem xk

    Yep we can turn the wheel and see the page go down or up but his button doesn't works. What do you mean with different program ? I tried to change with the offcial program the buttons for exemple change the right click to the wheel button etc but for every fonction the wheel button never works

  • RELEVANCY SCORE 2.64

    DB:2.64:Pitch Bend Wheel Does Not Respond As It Should cz


    I have the latest GB and Mountain Lion.
    Now I wanted to use the pitch bend wheel for a Guitar track, using the standard "Big Lead" guitar.But although it sounds correct while recording (with the musical keyboard), the result is only half of the wanted pitch bend.
    And even when I try to correct it manually in the pitch editor dialog, it does not change!I tried also to use the pitch wheel in Absynth and FM8, but with the same result.likeIs there any workaround?I would like to be able to set the range of the pitch bend wheel, too.
    Another way, which could be helpful, if I could use the AUPitch plugin in conection with an automation track - I mean, to be able to control the input. Now it's quite useless in the automation track, because there is no way to get a desired value. By the way, the same problem (to get excact values) appears in the volume track of the master track!!!!It would be a great help, when I could double click a dot to enter a value by numbers. Any help would be appriciated!Dietmar

    DB:2.64:Pitch Bend Wheel Does Not Respond As It Should cz

    I have the latest GB and Mountain Lion.
    Now I wanted to use the pitch bend wheel for a Guitar track, using the standard "Big Lead" guitar.But although it sounds correct while recording (with the musical keyboard), the result is only half of the wanted pitch bend.
    And even when I try to correct it manually in the pitch editor dialog, it does not change!I tried also to use the pitch wheel in Absynth and FM8, but with the same result.likeIs there any workaround?I would like to be able to set the range of the pitch bend wheel, too.
    Another way, which could be helpful, if I could use the AUPitch plugin in conection with an automation track - I mean, to be able to control the input. Now it's quite useless in the automation track, because there is no way to get a desired value. By the way, the same problem (to get excact values) appears in the volume track of the master track!!!!It would be a great help, when I could double click a dot to enter a value by numbers. Any help would be appriciated!Dietmar

  • RELEVANCY SCORE 2.63

    DB:2.63:What Does Problem With Recording Voice Mean And How Can I Fix It? 1z


    Problem of recording voice

    DB:2.63:What Does Problem With Recording Voice Mean And How Can I Fix It? 1z


    Please run Skype troubleshooter.

    Automatically diagnose and fix Skype audio and webcam issues




    Regards,Tamim__________________________________________________________________________________________Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hourIf one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • RELEVANCY SCORE 2.63

    DB:2.63: Pas D'Aftertouch Sur Mon Xboard49 pz


    Hello, I'm new on the forum. I use windows seven/reason3/xboard49.
    My problem, I can't have aftertouch on my Xboard49 keyboard.I use it with reason 3 and all commands drives fine reason but not the aftertouch. I did an UART reset, it send me the message :good. I have installed the good drivers from the cd and I saw that all was perfect in the peripherique window. I controlled the high and low value (80 / 600) of aftertouch with the key X1 of the keyboard all is ok. With a little soft named midiox I can see in realtime all the midi data transferred (mod wheel/pitch/note on and off/ control change...)but nothing from aftertouch.

    Thank a lot for your help
    mr Bousquet JR

    DB:2.63: Pas D'Aftertouch Sur Mon Xboard49 pz






    Originally Posted by Casey_E-MU


    So when you purchased the board in 2007 the after touch worked?
    Was it just recently that you noticed the after touch not working?

    How often do you use the board? Have you noticed if the action on the board is getting softer?

    Thanks
    Casey


    I don't use very often the xboard I m guitar player and effectively I'm looking to the aftertouch function only that last days.
    I play the keyboard twice a year in average.Maybe as you think something in the keyboard is dust by the time.
    But if it was that case the other day when the aftertouch worked, all the key worked and when it stopped worked it was for all the key. if it was a dust probl

  • RELEVANCY SCORE 2.63

    DB:2.63:Synaptics Not Working On Sony Vaio aj



    And another problem to solve...

    My system doesnt detect my touchpad. Well, it works, but I cant use Synaptics driver, because its detected as generic mouse. Ive installed xf-86-input-synaptics and xf86-input-evdev.

    Heres what my Xorg log says:
    [ 15396.302] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event8)
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass evdev pointer catchall
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Device: /dev/input/event8
    [ 15396.328] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 15396.329] (II) XINPUT: Adding extended input device ImPS/2 Generic Wheel Mouse (type: MOUSE)
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 15396.329] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)

    DB:2.63:Synaptics Not Working On Sony Vaio aj


    And another problem to solve...

    My system doesnt detect my touchpad. Well, it works, but I cant use Synaptics driver, because its detected as generic mouse. Ive installed xf-86-input-synaptics and xf86-input-evdev.

    Heres what my Xorg log says:
    [ 15396.302] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event8)
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass evdev pointer catchall
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Device: /dev/input/event8
    [ 15396.328] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 15396.329] (II) XINPUT: Adding extended input device ImPS/2 Generic Wheel Mouse (type: MOUSE)
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 15396.329] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)

  • RELEVANCY SCORE 2.63

    DB:2.63:Mod Wheel Changes Patches s7


    When I move the mod wheel the patches change in Mainstage. I have tried 3 different keyboard controllers and they all do this. I read that MS automatically passes modulation data without a controller assigned in layout mode so I deleted the mod wheel from my layout. Using MS 1 this was not an issue.
    I'm using a MOTU Micro Express MIDI interface. I can't find info on this in the manual, anybody know how to fix this?

    DB:2.63:Mod Wheel Changes Patches s7

    Changing the Channel to "Unassigned" does the trick.

  • RELEVANCY SCORE 2.63

    DB:2.63:Assassins Creed 2 Item Wheel Problem f9



    Everytime I pause the game or try losing it, the item wheel opens up and i can't get it to go away. Is this a problem with the game, counsle or my controller?







    Solved!
    Go to solution

    DB:2.63:Assassins Creed 2 Item Wheel Problem f9


    You're welcome





    Best (Ex)Community Moderator: Wretched_Hawk

  • RELEVANCY SCORE 2.63

    DB:2.63:Map Mod &Amp; Pitch Wheel To Ctrl. 4 &Amp; 11 Greyed Out! 3k


    I've been trying to edit my Orchestral Template in LP9 using the GB Jam Pack Orchstral instruments and other libraries. When I try to edit some of the other EXS instruments to respond to the mod and pitch wheel like the GB Orch instruments, the "Map Mod amp; Pitch Wheel to Ctrl. 4 amp; 11" is greyed out and I can't change it. Also, in the EXS editor the GB instruments won't allow me to "uncheck" this feature. (I did this in my problem solving experiments) I created this orchestral template with all EXS instruments and would like it if all of the brass, woodwinds, and strings responded the way that the GB Orch instruments respond for crescendo, decrescendo, and articulations. Thanks for any ideas about what's going on!

    DB:2.63:Map Mod &Amp; Pitch Wheel To Ctrl. 4 &Amp; 11 Greyed Out! 3k

    Thanks CCTM! I had to tick "show all" under the groups tab to find the select by control #4. Your help is greatly appreciated! You must be the same CCT from the Logic Pro Files bulliten board. Cheers

  • RELEVANCY SCORE 2.62

    DB:2.62:Crash On Stop Recording 9j


    I have just encountered a problem with GB08 - when ever I stop recording, I get the coloured wheel of death and have to force quit every time, losing my recording. It happens whether I use space bar, mouse click on record button, mouse click on play button, etc. I never had this problem with GB3. Very frustrating - anyone else come across this/have any ideas as to the solution. Cheers!

    DB:2.62:Crash On Stop Recording 9j

    I think it is a bug of GB 08??? Do you think so?

  • RELEVANCY SCORE 2.61

    DB:2.61:Request For Windows 2000 Pro Os pc


    Dear Sir/Madam,
    We are facing problem in starting up of an intel celron CPU.We feel it required formatting but, we lost the OS CD which we received along with the unit.This unit is using in an wheel alignment machine which is old(2005).
    The details of the CPU are as follows,
    Mod.: 5-100068A
    GTI: 2319
    VGA: ON BOARD
    Date: ott-04
    Case: MICRO ATX

    Ram: DDR 128 333MHZ
    DVD: LG DRD-8160B
    Lan: ON BOARD
    S.Oper: 2000 PROFF. UK
    PM: INTEL 845GVRSL
    Audio: ON BOARD
    Altro: PASSACAVO

    DB:2.61:Request For Windows 2000 Pro Os pc

    Even MSDN subscription doesn't carry Windows 2000 anymore. You could try one of these forums:
    http://answers.microsoft.com/en-us/windows.www.annabooks.com / www.seanliming.com / Book Author - Pro Guide to WE8S, Pro Guide to WES 7, Pro Guide to POS for .NET

  • RELEVANCY SCORE 2.61

    DB:2.61:Event Type Descriptions - Mod Wheel / Quick Access Auto Help zs


    I really just need some description for the possible event types you can assign to controllers in logic, like the mod wheel. For example, expression, portamento time... I don't know what i should be listening for when it comes to utilizing these controls. But I know some of these options would greatly enhance my samples (EWQLSO) in terms of reality (strings swelling instead of remaining stagnant). The manual mentions around 15 event types, and I was wondering if I could get some solid definitions. Some are obvious, but feel free to fill in the gaps, it would be much appreciated.

    Also, I've had some trouble getting mod-wheel movement to show up in multiple windows in logic. Even if I do automation quick access assigned to the mod wheel, I get split information. For instance, the Arrange Window will record pitch bend data, but it will not be reflected in the Event List, or Editor, let alone these options in the Matrix window.

    Any help would be great.

    DB:2.61:Event Type Descriptions - Mod Wheel / Quick Access Auto Help zs

    I really just need some description for the possible event types you can assign to controllers in logic, like the mod wheel. For example, expression, portamento time... I don't know what i should be listening for when it comes to utilizing these controls. But I know some of these options would greatly enhance my samples (EWQLSO) in terms of reality (strings swelling instead of remaining stagnant). The manual mentions around 15 event types, and I was wondering if I could get some solid definitions. Some are obvious, but feel free to fill in the gaps, it would be much appreciated.

    Also, I've had some trouble getting mod-wheel movement to show up in multiple windows in logic. Even if I do automation quick access assigned to the mod wheel, I get split information. For instance, the Arrange Window will record pitch bend data, but it will not be reflected in the Event List, or Editor, let alone these options in the Matrix window.

    Any help would be great.

  • RELEVANCY SCORE 2.61

    DB:2.61:Another Mod Problem jz


    Hi, i downloaded one MOD from UT3MOD.COM
    i did it from my ps3, i created the folders on my laptop then downloaded mod into that folder
    It worked
    But when i go to install another mod, it won't work for some reason. It says file already exists, so when i rename and save it it still doesn't work



    PSN-IITriXIIXBL-I T r i X II

    DB:2.61:Another Mod Problem jz

    Hi, i downloaded one MOD from UT3MOD.COM
    i did it from my ps3, i created the folders on my laptop then downloaded mod into that folder
    It worked
    But when i go to install another mod, it won't work for some reason. It says file already exists, so when i rename and save it it still doesn't work



    PSN-IITriXIIXBL-I T r i X II

  • RELEVANCY SCORE 2.58

    DB:2.58:Pitchbend ks


    i cant seem to get orchestral sounds to respond to the pitchbend wheel or to the manually inputed pitchbend data. mod wheel, fine. it also works fine with any of the 'synth string' type of sounds (any other sounds actually) but not with the xtra orchestral instruments or orchestral jam packs. anyone any thoughts?

    thanks.

    DB:2.58:Pitchbend ks

    i cant seem to get orchestral sounds to respond to the pitchbend wheel or to the manually inputed pitchbend data. mod wheel, fine. it also works fine with any of the 'synth string' type of sounds (any other sounds actually) but not with the xtra orchestral instruments or orchestral jam packs. anyone any thoughts?

    thanks.

  • RELEVANCY SCORE 2.58

    DB:2.58:Wheel Colliders Created At Runtime Strange Behavior 9c



    Yes! Change gameobject parent DOES corrupt data!

    wheel = new GameObject();
    wheel.transform.parent = transform;
    wheel.transform.localPosition = Vector3.zero;
    wheel.name = wheelNames[i];
    wheels.push(wheel);
    wheel.AddComponent(WheelCollider);
    wheelColliders.push(wheel.GetComponent(WheelCollider));
    wheelColliders[i].motorTorque = 0.0;



    That solved the problem!

    DB:2.58:Wheel Colliders Created At Runtime Strange Behavior 9c


    Yes! Change gameobject parent DOES corrupt data!

    wheel = new GameObject();
    wheel.transform.parent = transform;
    wheel.transform.localPosition = Vector3.zero;
    wheel.name = wheelNames[i];
    wheels.push(wheel);
    wheel.AddComponent(WheelCollider);
    wheelColliders.push(wheel.GetComponent(WheelCollider));
    wheelColliders[i].motorTorque = 0.0;



    That solved the problem!

  • RELEVANCY SCORE 2.58

    DB:2.58:Mod Wheel Instrument Articulation In Logic Express ss


    Hello all;
    I'm new to all things Apple. In Garageband I can play different articulations using the mod wheel and Symphony Orchestra Jam Pack without making any additional settings. It just works. However, in Logic Express, the mod wheel does not appear to work the same way. The MIDI activity window shows the wheel is inputing data but the sound remains the same, no articulations.

    Any suggestions would be helpful.

    Thanks
    Bill

  • RELEVANCY SCORE 2.58

    DB:2.58:Recording Source Changed By Game 1s


    Hi there, I have an Audigy 2 Platinum eX. I've recently started playing Counterstrike (a Half Life Mod), I use a piece of software called 'Ventrilo' to talk to friends via my mic during gameplay.

    The problem is, every time I open Counterstrike, the recording source in my 'surround mixer' gets changed to 'wave/mp3' from 'line /mic'. This means that when I talk on ventrilo, whatever I am listening to (noises from gameplay) are broadcast to the other users on ventrilo.

    The only way I can stop this, is to alt+tab out of counterstrike, and change the recording source back to line /mic.

    There are no settings inside counterstrike to define the input source (as they have an integrated voice comms) and I can't find any options to disable or change the source it picks.

    My friend has my old Sound Blaster Li've! Platinum, and he doesn't have this problem.

    Is there any way to maybe disable applications from changing the recording source? Or any other solutions?

    Sorry for writing so much, and thanks for your help!

    DB:2.58:Recording Source Changed By Game 1s

    empty_sound,

    You may need to change certain setting within CS. Check this article from Steam.


    Jason

  • RELEVANCY SCORE 2.58

    DB:2.58:Player Lags When Recording? 1s



    i was recording something for about 30-40 minutes.

    the screen went off but the player was still recording.

    when i tried to move the scroll wheel it took almost 4 minutes to get the player to respond and the screen come back on.

    is this normal?

    DB:2.58:Player Lags When Recording? 1s


    using the latest firmware.

    the recording im doing is usually around 30 minutes to hour and half.

    ive listened to the recording and it plays fine, but upon trying to wake it from recording, it takes a LONG time.
    Message Edited by devadv on 03-27-2009 03:11 PM

  • RELEVANCY SCORE 2.57

    DB:2.57:Pitch Bend Not Working ka


    hi I have an evolution mk461c usb midi controller.
    when I play any software synth in logic 8 I can use the mod wheel (c23) and it works but the pitch bend (c22) doesnt. I can see midi data coming in on channel 22 but ut has no effect. any ideas?
    best tommy banana

    DB:2.57:Pitch Bend Not Working ka

    hi I have an evolution mk461c usb midi controller.
    when I play any software synth in logic 8 I can use the mod wheel (c23) and it works but the pitch bend (c22) doesnt. I can see midi data coming in on channel 22 but ut has no effect. any ideas?
    best tommy banana

  • RELEVANCY SCORE 2.57

    DB:2.57:Bdc Is Not Working In Back Ground 9k



    Hi all,

    I have created bdc for F-51 but it is not working in back ground (mod N) and it is not showing any error in error tab , but it is working fine in mod A E .I tried with mod P and using CTU_PARAMS but no use..

    I have tested my recording in SHDB , in SHDB I have assigned session ,

    And I executed that session in SM35 .

    In SM35 I given processing mod foreground and error mod both are working fine but while trying in Background mod it is showing below error

    u201CThe difference is too large for clearingu201D

    How can I resolve this problem?

    DB:2.57:Bdc Is Not Working In Back Ground 9k


    Hi,

    I think, you can check once as set as mode n. it means 'N' indicates the errors of background will be shown.

    and it doesn't shows no screens. It will shows output or input at end .

    Might be check once because when the mode 'A' it successfully worked then mode 'N' also work properly.

    so, you have check it.

  • RELEVANCY SCORE 2.56

    DB:2.56:Articulation Works, Then It Doesn't 8x


    I'm running Logic Pro 7.2.3 on MacPro 2.66 with 2 gigs of RAM. I have a cheap evolution Keys 49 Midi keyboard that has pitch bend and modulation wheels. I am using Jam Pack 4 to compose symphony tracks.

    When I create a new Logic song/project, the mod wheel on my keyboard handles articulation perfectly. Using cello as an example, it switches from legato to staccato fine. Here's the problem: When I close or quit the song and return, the mod wheel doesn't function. The cello is locked into legato mode. The transport window shows that Logic is reading the articulation data, but no articulation is heard. I know it's not the keyboard because I can bring the same cello instrument up in Garageband and the articulation works everytime.

    Has anyone had this problem?

    MacPro 2.66 2GB RAM Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

    DB:2.56:Articulation Works, Then It Doesn't 8x

    It's good to know someone else is having a similar problem (if one can call that good!)

    I've been poking around and I've also noticed this: If I create a cello part in Garageband, articulation works everytime I open it. If I take that Garageband song and open it in Logic, articulation still works everytime I open it. The Logic file in this instance is saved as a "Logic Song." I don't know how to tell, but I'm assuming the Logic song is drawing it's sound files from the Garageband song (I don't know how to check that).

    However, if I save the newly created Logic song as a project - with all sound files being copied to folders within a master project folder - articulation does not work when I reopen the file.

    Strange. And frustrating.

    MacPro 2.66 2GB RAM Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

  • RELEVANCY SCORE 2.56

    DB:2.56:Problem With Hour Formats f7


    Hello,
    I have a field smallint which gives duration in seconds. I want to show it in on SSRS but on  ' hh:mm:ss ' instead of second, so I use the following custom expression:
     
    =IIF(Fields!.Value=0,00:00:00,
    IIF( Len( Fix((Fields!.Value/3600))=1,0 Fix((Fields!.Value/3600),Fix((Fields!.Value/3600))
    : IIF(Len( Fix(((Fields!.Value mod 3600) / 60) )=1,0 Fix(((Fields!.Value mod 3600) / 60),Fix(((Fields!.Value mod 3600) / 60))
    : IIF(Len( ((round(Fields!.Value mod 3600) mod 60))=1,0 ((round(Fields!.Value mod 3600) mod 60),((round(Fields!.Value mod 3600) mod 60))
    )
     
     
    The problem is that, when I export the report to Excel, I cannot make calculations on this column, because Excel does not know the format of the column.
     
    What can I do to have this field with an hour format in SSRS, and in Excel too?

    DB:2.56:Problem With Hour Formats f7

    I have already do it, and i can have the field in excel and SSRS in the date format. But the problems is that, i can't do an agregation for this field in reporting services ( and that very imoprtant for me),because it's in the date format. And in excel i have a problem in the calculation, for exemple the sum of too field : 00:00:10 and 00:00:01 is 48:00:11, i have 48 hour in more .Someone have a solutions please!!!!!!!!

  • RELEVANCY SCORE 2.55

    DB:2.55:Dbi Perl Mod d7





    A client could need that DBI perl mod be installed on our server, would this be any problem ?

    I havnt heard of this mod before, have any of you heard of it, and if so will it cause any problems on plesk ?

    Thanks,
    Glenn

    DB:2.55:Dbi Perl Mod d7




    I have 3 servers with RH7.2 and psa 5.0.2 rpm running that module and I have not had any problems.(just thought I would let you know that)......Briman

  • RELEVANCY SCORE 2.54

    DB:2.54:Spinning Wheel When Audio Recording p7


    when i attempt to audio record onLogic 9 i get the spinning wheel and have to wait about ten seconds before record engages, regardless of buffer size; No other programs (digital performer or ableton live) have this problem on my computer (imac 2.6 dual; new;) other people making same complaint but update dosen'taddress this; messing up my business; what to do

    DB:2.54:Spinning Wheel When Audio Recording p7

    Having the same problem too. It seems to take even longer when the singer or guitarist is in the room.
    Very embarrassing. I have been going back to 7.2 for overdubbing until I sort it out.
    I'm thinking that because I'm on a new terra drive it's paving the way for a millennium of space each time I hit record. It says there are 536 minutes recording time remaining. This is a great feature to be able to turn off.
    I'm still trying things. I've noticed it the worst (i.e. longest waiting time) when the song had a lot of instrument plug-ins. It's not so bad at the moment on the current song with no one in the room. Only 2 secs when doing a test record. The same song took up to 10 secs to start recording when the guitarist was here yesterday!
    More importantly, does anyone know how to set the record time to i.e.5 minutes like we can do in 7.2?
    Any ideas would be most appreciated.

  • RELEVANCY SCORE 2.54

    DB:2.54:Swap Files cs


    hi, i searched the forums but no real info or solution about this.before i had no such problem, it all began 3 weeks ago and without any reason i can think of.Machine: Mac pro 12Gb ram, disk free space 80Gb. lion all updates done.what happens is sometimes osx pops up a force quit window repeatedly.i managed to find possible reason: 59GB of swap files ?!always had large swap files and a 1-1 size for the sleepimage/RAM amountbut this is absurd.. 62 swapfiles og 1GB ?! seriously,how do i clear that up? avoid it to happen again? (except from buying additional HD ... lol)thnx for advices.ame235.the output of ls /private/var/vm/[11:15][xxx@xxx] /private/var/vm lstotal 148897792drwxr-xr-x 66 root wheel 2244 May 16 11:15 ./drwxr-xr-x 30 root wheel 1020 Mar 2 10:49 ../-rw------T 1 root wheel 12884901888 Apr 23 15:26 sleepimage-rw------- 1 root wheel 67108864 May 16 11:15 swapfile0-rw------- 1 root wheel 67108864 May 16 11:15 swapfile1-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile10-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile11-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile12-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile13-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile14-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile15-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile16-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile17-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile18-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile19-rw------- 1 root wheel 134217728 May 16 11:15 swapfile2-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile20-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile21-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile22-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile23-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile24-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile25-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile26-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile27-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile28-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile29-rw------- 1 root wheel 268435456 May 16 11:15 swapfile3-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile30-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile31-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile32-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile33-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile34-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile35-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile36-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile37-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile38-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile39-rw------- 1 root wheel 536870912 May 16 11:15 swapfile4-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile40-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile41-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile42-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile43-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile44-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile45-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile46-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile47-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile48-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile49-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile5-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile50-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile51-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile52-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile53-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile54-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile55-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile56-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile57-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile58-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile59-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile6-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile60-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile61-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile62-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile7-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile8-rw------- 1 root wheel 1073741824 May 16 11:15 swapfile9

    DB:2.54:Swap Files cs

    I really apreciate your help,ialso tried that but activity monitor didn't reveal anything at that time. Apps using memory, nothing special none using that much ram.i rebooted in the meantime, so i cannot check it again.will wait for problem to happen again and check back at that time.

  • RELEVANCY SCORE 2.54

    DB:2.54:Is There A Shortcut For This? ck


    When you are looking at a midi track in the matrix view, is there a way to hit a key and have the Hypereditor that shows MOD wheel (or sustain) come up? I know I should probably just save a window set....;)

    TH

    DB:2.54:Is There A Shortcut For This? ck

    Oh man, Jim, very cool!

    Is this program crazy or what? Seems like it can do almost anything;)

    Tom

  • RELEVANCY SCORE 2.53

    DB:2.53:Midi Controllers And Software Instruments - How Block "Default"? zk


    In M.S. v. 2.2.2, I have programmed a pad patch in the ES P software instrument and discovered I could assign the keyboard's modulation wheel (MIDI controller #1) to the ES P's -1 Octave and -2 Octaves parameters, so I could reduce those to zero to make the patch less "meaty." That works great. The problem I have is that moving the mod. wheel also causes the modulation depth of VCF via the LFO to change, bringing in a nasty wah/vibrato. Strangely, the on-screen controls in the ES P for the VCF/LFO do not change when I move the wheel; only the -1 and -2 octave controls change.It seems like MIDI controller #1 is implemented, at least in this software instrument, with a default action which I don't see how to change or defeat. Ideas?Aha! I found a band aid approach! I added a third (ugh!) mapping to the mod. wheel via the Screen Control Inspector, selecting MIDI Controller | 1 (Modulation) then setting the Saved Value, Range Max and Range Min values to 0.Grace under pressure...

    DB:2.53:Midi Controllers And Software Instruments - How Block "Default"? zk

    In M.S. v. 2.2.2, I have programmed a pad patch in the ES P software instrument and discovered I could assign the keyboard's modulation wheel (MIDI controller #1) to the ES P's -1 Octave and -2 Octaves parameters, so I could reduce those to zero to make the patch less "meaty." That works great. The problem I have is that moving the mod. wheel also causes the modulation depth of VCF via the LFO to change, bringing in a nasty wah/vibrato. Strangely, the on-screen controls in the ES P for the VCF/LFO do not change when I move the wheel; only the -1 and -2 octave controls change.It seems like MIDI controller #1 is implemented, at least in this software instrument, with a default action which I don't see how to change or defeat. Ideas?Aha! I found a band aid approach! I added a third (ugh!) mapping to the mod. wheel via the Screen Control Inspector, selecting MIDI Controller | 1 (Modulation) then setting the Saved Value, Range Max and Range Min values to 0.Grace under pressure...

  • RELEVANCY SCORE 2.53

    DB:2.53:Expression Pedal Isn't Recogonized When Recording xj


    I am able to play my Novation Remote SL and logic records the notes, after touch, mod wheel, and external sustain pedal, but will not record the expression pedal plugged into the keyboard controller right along side the sustain pedal. I AM able to hit Command-L and assign that expression pedal to a parameter, like the wah pedal in logic's pedal board. Its so cool, and that seems to work perfectly, But for whatever reason, the control change data isn't being recogonized and recorded along with the rest of the performance data. Please help.

    DB:2.53:Expression Pedal Isn't Recogonized When Recording xj

    Oh thank you so much. This makes sense now. If I assign the exp pedal to a pedalboard wah, then ofcourse I want it to latch to the wah automation track. I was under the impression that my assignments are only valid for instruments and plugs when I highlight that particular track.It seems to me, that there must be a preference to allow the exp pedal to default back to CH11 when not using the Wah I assigned to it. But I guess it's so easy to assign it and then delete it, no big deal.

  • RELEVANCY SCORE 2.53

    DB:2.53:Mouse Wheel Not Working Anymore In Max fk


    hellothe mouse wheel is not panning nor rotating in any viewport. It works fine in any browser so the problem is not with the mouse wheel itself. It greatly affects my workflow in animation. Please advise.Thanks.

  • RELEVANCY SCORE 2.52

    DB:2.52:Disk Too Slow (-10004) (Record) Please Help! 9k


    Hey all,

    I've recently started using Logic Express, my latest version is 7.2.3 (961.9).

    I use an Edirol FA-66 Firewire interface (core audio enabled) and I plug in an AKG Perception 200 mic to record an acoustic guitar.

    When recording audio, getting to about 2.20 I get the above message (-10004), this interrupts the recording.

    My Audio driver preferences are:

    Driver: FA-66 (0511)
    IO Buffer Size: 128
    Recording Delay: 0
    Max tracks: 32
    Larger Disk buffer is checked
    24-bit is unchecked
    Software Monitoring is checked.

    The only mod I have made to these settings to try to solve my problem is changing the IO buffer size from 512 to 128, but I still get the same message.

    Its really quite upsetting as I've spent 1000s of pounds on this setup, the disk cant be too slow for 1 track of audio surely?? Its a brand new disk 160gb with at least 90gb available, I also bought an extra gig of ram for recording purposes.

    Please Help!

    DB:2.52:Disk Too Slow (-10004) (Record) Please Help! 9k

    Hi,
    Thanks again everyone for your help.

    I think I've solved the problem using my external hard drive as a dedicated audio drive.

    The audio settings i'm now using are:

    I/O buffer size : 1024
    Large Disk Buffer : unchecked.

    I also have the sample rates on the FA-66 and Logic set at 44.1

    With these settings I was able to get 5:40 with no interruptions. I'll keep you updated if anything else goes wrong.

    Right now it looks fixed......

    Thanks again!

  • RELEVANCY SCORE 2.52

    DB:2.52:Legend Of Grimrock And I3wm - Mouse Clicks Dont Work 3c



    Hello!I played Legend of Grimrock on my XPS 15 laptop using primusrun on Openbox without any problems. Now as I switched to i3, when I start this game, either with primusrun or without, it shows up, sound works etc. I can navigate the menu with keyboard arrows, move the cursor around, but there is no reaction to clicks, so I am not able to go past the New/Load Game screen.

    My question is: have any of you encountered this problem (especially using i3)? Is there any workaround?

    Here is my i3 config file:
    # This file has been auto-generated by i3-config-wizard(1).
    # It will not be overwritten, so edit it as you like.
    #
    # Should you change your keyboard layout somewhen, delete
    # this file and re-run i3-config-wizard(1).
    #

    # i3 config file (v4)
    #
    # Please see http://i3wm.org/docs/userguide.html for a complete reference!

    set $mod Mod4

    # Font for window titles. Will also be used by the bar unless a different font
    # is used in the bar {} block below. ISO 10646 = Unicode
    #font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
    # The font above is very space-efficient, that is, it looks good, sharp and
    # clear in small sizes. However, if you need a lot of unicode glyphs or
    # right-to-left text rendering, you should instead use pango for rendering and
    # chose a FreeType font, such as:
    # font pango:DejaVu Sans Mono 10
    font pango:DejaVu Sans Serif 10

    # Use Mouse+$mod to drag floating windows to their wanted position
    floating_modifier $mod

    # start a terminal
    bindsym $mod+Return exec i3-sensible-terminal

    # kill focused window
    bindsym $mod+Shift+q kill

    # start dmenu (a program launcher)
    #bindsym $mod+d exec dmenu_run
    # There also is the (new) i3-dmenu-desktop which only displays applications
    # shipping a .desktop file. It is a wrapper around dmenu, so you need that
    # installed.
    bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

    # change focus
    bindsym $mod+j focus left
    bindsym $mod+k focus down
    bindsym $mod+l focus up
    bindsym $mod+semicolon focus right

    # alternatively, you can use the cursor keys:
    bindsym $mod+Left focus left
    bindsym $mod+Down focus down
    bindsym $mod+Up focus up
    bindsym $mod+Right focus right

    # move focused window
    bindsym $mod+Shift+j move left
    bindsym $mod+Shift+k move down
    bindsym $mod+Shift+l move up
    bindsym $mod+Shift+semicolon move right

    # alternatively, you can use the cursor keys:
    bindsym $mod+Shift+Left move left
    bindsym $mod+Shift+Down move down
    bindsym $mod+Shift+Up move up
    bindsym $mod+Shift+Right move right

    # split in horizontal orientation
    bindsym $mod+h split h

    # split in vertical orientation
    bindsym $mod+v split v

    # enter fullscreen mode for the focused container
    bindsym $mod+f fullscreen

    # change container layout (stacked, tabbed, toggle split)
    bindsym $mod+s layout stacking
    bindsym $mod+w layout tabbed
    bindsym $mod+e layout toggle split

    # toggle tiling / floating
    bindsym $mod+Shift+space floating toggle

    # change focus between tiling / floating windows
    bindsym $mod+space focus mode_toggle

    # focus the parent container
    bindsym $mod+a focus parent

    # focus the child container
    #bindsym $mod+d focus child

    # switch to workspace
    bindsym $mod+1 workspace 1
    bindsym $mod+2 workspace 2
    bindsym $mod+3 workspace 3
    bindsym $mod+4 workspace 4
    bindsym $mod+5 workspace 5
    bindsym $mod+6 workspace 6
    bindsym $mod+7 workspace 7
    bindsym $mod+8 workspace 8
    bindsym $mod+9 workspace 9
    bindsym $mod+0 workspace 10

    # move focused container to workspace
    bindsym $mod+Shift+1 move container to workspace 1
    bindsym $mod+Shift+2 move container to workspace 2
    bindsym $mod+Shift+3 move container to workspace 3
    bindsym $mod+Shift+4 move container to workspace 4
    bindsym $mod+Shift+5 move container to workspace 5
    bindsym $mod+Shift+6 move container to workspace 6
    bindsym $mod+Shift+7 move container to workspace 7
    bindsym $mod+Shift+8 move container to workspace 8
    bindsym $mod+Shift+9 move container to workspace 9
    bindsym $mod+Shift+0 move container to workspace 10

    # reload the configuration file
    bindsym $mod+Shift+c reload
    # restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
    bindsym $mod+Shift+r restart
    # exit i3 (logs you out of your X session)
    bindsym $mod+Shift+e exec i3-nagbar -t warning -m You pressed the exit shortcut. Do you really want to exit i3? This will end your X session. -b Yes, exit i3 i3-msg exit

    # resize window (you can also use the mouse for that)
    mode resize {
    # These bindings trigger as soon as you enter the resize mode

    # Pressing left will shrink the window’s width.
    # Pressing right will grow the window’s width.
    # Pressing up will shrink the window’s height.
    # Pressing down will grow the window’s height.
    bindsym j resize shrink width 5 px or 5 ppt
    bindsym k resize grow height 5 px or 5 ppt
    bindsym l resize shrink height 5 px or 5 ppt
    bindsym semicolon resize grow width 5 px or 5 ppt

    # same bindings, but for the arrow keys
    bindsym Left resize shrink width 5 px or 5 ppt
    bindsym Down resize grow height 5 px or 5 ppt
    bindsym Up resize shrink height 5 px or 5 ppt
    bindsym Right resize grow width 5 px or 5 ppt

    # back to normal: Enter or Escape
    bindsym Return mode default
    bindsym Escape mode default
    }

    bindsym $mod+r mode resize

    # Start i3bar to display a workspace bar (plus the system information i3status
    # finds out, if available)
    bar {
    status_command i3status
    }

    #no borders
    new_window none

    #firefox, workspace 1, programming 2
    assign [class=^Firefox$] → 1
    assign [class=^NetBeans.*] → 2
    assign [class=^Geany$] → 2
    assign [class=^Codeblocks$] → 2

    #autostart
    exec setxkbmap pl
    exec wicd-client --tray

    # class border backgr. text indicator
    client.focused #101010 #000000 #ffffff #2e9ef4
    client.focused_inactive #333333 #5f676a #ffffff #484e50
    client.unfocused #333333 #222222 #888888 #292d2e
    client.urgent #2f343a #90000 #ffffff #900000

    workspace_auto_back_and_forth yes
    bindsym $mod+i exec firefox

    DB:2.52:Legend Of Grimrock And I3wm - Mouse Clicks Dont Work 3c


    Im smacking a potentially dead horse here... but did anything else come from this? I installed Legend of Grimrock (incidentally while running i3) sometime back (always from the AUR) and it ran beautifully. Then, a month or so ago I made the move to KDE, and Grimrock had this issue: mouse clicks didnt work no matter what I tried.

    I recently did a fresh install, and got excited thinking whatever I did should be fixed... same issue (this time in Cinnamon, I DE/WM hop a lot). Yet it works for me in Debian... so theres something specifically about the AUR version thats not quite right.

    Ill try the regular install tonight, but please let me know if you find anything else out. I made a comment on the AUR package (last comment was in January). Would love to at least know *why* its suddenly gone bonkers on me.

    UPDATE: Installing from the script downloaded from HB works just fine. Which begs the question of what goes on with the AUR install. Grr...

    Last edited by mtcupps (2013-03-28 23:09:00)

  • RELEVANCY SCORE 2.52

    DB:2.52:Mod Wheel Difficulties kp


    Hi there,

    Im getting more into the modwheel aspects of software such as Garritan and EastWest Gold Symphonic Orchestra but my keyboard doesnt have a mod wheel or a pitch wheel

    So

    1. Can I buy an external stand alone mod wheel that plugs in as a usb midi device? Does anyone know anywhere that might have this?
    2. If not then is there a virtual mod wheel plug in I could use, or is it possible to edit all the midi information sent from the mod wheel using automation data in Logic? I notice Garritan has a virtual mod wheel, is there a plug in that could be downloaded to use with EastWest?
    3. My ancient keyboard has a pitch wheel but its spring loaded, is it worth getting this out and trying to assign it as a mod wheel or is it just not worth it? (plus its only 2 octaves.
    4. My keyboard is a really expensive full scale fully weighted stage piano so Im reluctant, actually cant afford a full size mod wheel one, should I get a small keyboard with a mod wheel and use this after inputting the notes on the other keyboard or is that not worth it either?
    5. Can anyone recommend any other solutions to my problem or a really good cheap midi controller keyboard?

    Thanks for any help anyone can give! Im really worried that I dont really have an easy way out here without buying a new keyboard :s.

    All the best,

    Blair

    iMac G5 2.1 Power pc 1.5 Gb Ram Mac OS X (10.4.9)

    DB:2.52:Mod Wheel Difficulties kp

    Hi there,

    Im getting more into the modwheel aspects of software such as Garritan and EastWest Gold Symphonic Orchestra but my keyboard doesnt have a mod wheel or a pitch wheel

    So

    1. Can I buy an external stand alone mod wheel that plugs in as a usb midi device? Does anyone know anywhere that might have this?
    2. If not then is there a virtual mod wheel plug in I could use, or is it possible to edit all the midi information sent from the mod wheel using automation data in Logic? I notice Garritan has a virtual mod wheel, is there a plug in that could be downloaded to use with EastWest?
    3. My ancient keyboard has a pitch wheel but its spring loaded, is it worth getting this out and trying to assign it as a mod wheel or is it just not worth it? (plus its only 2 octaves.
    4. My keyboard is a really expensive full scale fully weighted stage piano so Im reluctant, actually cant afford a full size mod wheel one, should I get a small keyboard with a mod wheel and use this after inputting the notes on the other keyboard or is that not worth it either?
    5. Can anyone recommend any other solutions to my problem or a really good cheap midi controller keyboard?

    Thanks for any help anyone can give! Im really worried that I dont really have an easy way out here without buying a new keyboard :s.

    All the best,

    Blair

    iMac G5 2.1 Power pc 1.5 Gb Ram Mac OS X (10.4.9)

  • RELEVANCY SCORE 2.51

    DB:2.51:Another Forum Mod Problem... 3k


    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_install/windows-wont-accept-my-activation-code-after/25a708b6-b768-464b-84fe-adfa1e2515d5
    The 'Answer' is so general that it would cover anything, almost.
    One Forum Mod doing a fvaour for another?

    DB:2.51:Another Forum Mod Problem... 3k

    Hi Kiran.
    Thanks - but that wasn't really what I was looking for :)

    The second link in M Joseph's response is redundant, since if the OP correctly follows the somewhat convoluted references in the firstcorrectly, they will already have contacted the Activation Center.

    The first link is one of MS's wonderful 'catch-all' articles - and I've seen many people confused by it, and wander off into a metaphorical wilderness.

  • RELEVANCY SCORE 2.51

    DB:2.51:Problem With Recording Device 9f



    My skype keeps saying this: "Problem with recording device" whenever I call out with video.

    DB:2.51:Problem With Recording Device 9f


    In Skype go to Tools - Options - Audio settings. What device do you see there selected as your Microphone? Is there more than one option available in the selection box? Can you see any response on the Volume bar when you make any sound?

  • RELEVANCY SCORE 2.51

    DB:2.51:(Nokia N9) Is The Video Recording Really That Bad? dp



    Hello guys, there's some time that I'm using the Nokia N9 and I just can't believe that the video recording quality is that bad, I came from a Nokia C6-01 and honestly, the C6-01 is much much better. The problem with the N9 is that when you move the camera the video become a mess full of artifacts, the auto-focus and the incredible audio recording become irrelevant when the videos don't make any justice for what you expect from HD videos. It's just sad that this only happens when you are moving the camera, if you stand still, the quality is incredible and the audio quality makes it perfect. I bet that the problem is from the low bitrate from the N9 videos. I'm hopeless but I wonder if there's a mod or anything that can be done to make the videos look better?

    DB:2.51:(Nokia N9) Is The Video Recording Really That Bad? dp

    The N9 does have an issue on video recording.
    When I was still using the Nokia N9, there are some frame lags and video quality is not at its best. Details are good on me but not as good as my Lumia 710 or the Nokia E7.
    And yet unfortunately, I can't help you on this one.



    If I have helped you in any way, give me a kudos!

  • RELEVANCY SCORE 2.51

    DB:2.51:How Do I Make It So I Can Use My Mod Wheel To Control The Volume For Jampak m8


    how do I make it so I can use my mod wheel to control the volume for the Orchestra Jam Pack?

    Let's say I want to use the Violins 1 legato EXS instrument and use the mod wheel for volume, or say, expression (CC#11)? What's the best way to redirect that information? I think I tried it once using a transformer in the environment, but I seem to recall that ended up recording MIDI data on all my MIDI tracks at once.

    Also, is there a way I can set it up so it cross fades between the three different samples there are for this instrument (I checked it out and apparently there's a legato f, mf, and p)

    How do you folks handle this kind of thing? (Volume and expression)

    thanks!
    Keith

    DB:2.51:How Do I Make It So I Can Use My Mod Wheel To Control The Volume For Jampak m8

    Thanks! I'll try that when I get home. I think I started to do that but I'll keep working with it.

    Also, to clarify my question, I'm referring specifically to the volume controls that emulate what a real musician would do when they'd be playing a wind or string instrument-- like something I'd implement when I'd actually record the part. (I'm not asking so much about the mixing process for a good overall orchestra sound.)

    Anyone else have any thoughts specifically on volume controls and setting up cross fading in EXS? I apologize if this topic's been covered in previous sessions.

    Keith

  • RELEVANCY SCORE 2.51

    DB:2.51:Video: Problem With Recording Device sc


    When I try to initiate a video call I get this reply: Problem with recording device. How can I fix this????

    DB:2.51:Video: Problem With Recording Device sc


    What do you have selected as Microphone in Tools - Options - Audio settings? Is there more than one option available in the selection box? Can you see any response onthe Volume bar when you make any sound?

  • RELEVANCY SCORE 2.51

    DB:2.51:Pitchbend Problem m3


    For recording an audio instrument (guitar) I've used my controller keyboard. I've used my modulation wheel to get the pitchbend I needed. With this pitchbend I could push the note up and down. Today I opened the arrangement and I wanted to record a new guitar part, but using the modulation wheel on my keyboard doesn't change the pitchbend, but now it's controlling the master volume of my guitar amp. I've tried to Reset controllers in Options, but it's no help. Any advice on how to get my pitchbend back?

    DB:2.51:Pitchbend Problem m3

    For recording an audio instrument (guitar) I've used my controller keyboard. I've used my modulation wheel to get the pitchbend I needed. With this pitchbend I could push the note up and down. Today I opened the arrangement and I wanted to record a new guitar part, but using the modulation wheel on my keyboard doesn't change the pitchbend, but now it's controlling the master volume of my guitar amp. I've tried to Reset controllers in Options, but it's no help. Any advice on how to get my pitchbend back?

  • RELEVANCY SCORE 2.51

    DB:2.51:Access Duplicate Rows mf


    Hello all, I am trying to combine two rows in access that has duplicate data. Here is an example.

    My current SQL
    SELECT [PM List].[Preferred Engineer], [PM List].[PM Due Date], [PM List].Customer, [PM List].[IB Model/Test], [PM List].[Instance #], [PM List].[PM Task Number], [PM List].[PM Type], [Type 1 Mod].[MOD Number], [Type 2 Mod].[MOD Number]
    FROM ([PM List] LEFT JOIN [Type 1 Mod] ON [PM List].[Instance #] = [Type 1 Mod].[IB Instance Number]) LEFT JOIN [Type 2 Mod] ON [PM List].[Instance #] = [Type 2 Mod].[IB Instance Number];

    My problem is that the PM, Mod type 1, and Mod type 2 can have multiples that causes duplicate rows. I would like to combine the like information and display the unique data in another column or seperated by a comma.
    Thamk you

    DB:2.51:Access Duplicate Rows mf

    You do know of the 'Hide Duplicates' in a report that would present the data like this --
    dddd eeee fffff xyz
    pqr
    stu
    dddd eeee gggg abc
    def
    ghi
    This method might accomplish what you want.

  • RELEVANCY SCORE 2.51

    DB:2.51:Automate Mod Wheel? m8


    I cant seem to figure out how I might be able to do this. Is it possible?

  • RELEVANCY SCORE 2.51

    DB:2.51:Violin Solo In Jp5! Part Ii 77


    Hello

    So, to turn the Fiddle into a Violin, do the following:
    1. In GarageBand, load up the Irish Fiddle.
    2. In the Track Info window, click on the Pencil Button (In the row labeled "Generator"
    3. Drag the "Attack" slider to the right slightly.
    TA DAAA!

    Now, for playing.
    Make sure you have an expression pedal.
    Move the mod wheel all the way up to get a full vibrato.
    If you want a trill one whole step up, move the mod wheel to a lower middle position.
    If you want a trill one half step up, then move the mod wheel to an upper middle position.
    Use the expression pedal to add crescendi and decrescendi.

    Hope this works!
    So long!

    DB:2.51:Violin Solo In Jp5! Part Ii 77

    Hello

    So, to turn the Fiddle into a Violin, do the following:
    1. In GarageBand, load up the Irish Fiddle.
    2. In the Track Info window, click on the Pencil Button (In the row labeled "Generator"
    3. Drag the "Attack" slider to the right slightly.
    TA DAAA!

    Now, for playing.
    Make sure you have an expression pedal.
    Move the mod wheel all the way up to get a full vibrato.
    If you want a trill one whole step up, move the mod wheel to a lower middle position.
    If you want a trill one half step up, then move the mod wheel to an upper middle position.
    Use the expression pedal to add crescendi and decrescendi.

    Hope this works!
    So long!

  • RELEVANCY SCORE 2.50

    DB:2.50:How To Rotate The Wheel Smoothly Without Graphics Flickering? ca



    I have created a small rotating wheel animation by manual tuning. The wheel BG graphics is flickering and also breaking when we rotate the wheel.

    The sample file is uploaded in below link

    Kindly update me the solution for this problem and thanks in advance.

    Link: https://rapidshare.com/files/1237949451/Sample.zip

    DB:2.50:How To Rotate The Wheel Smoothly Without Graphics Flickering? ca


    Thanks for the suggested techniques.I followed all the thing that you adviced. But still the issue is not yet solved.As per your advice i update the file you can find the updated file on the following link.Can you give me feedback what is wrong in this file.

    Uploaded path: http://rapidshare.com/files/1632745100/Sample1.zip

  • RELEVANCY SCORE 2.50

    DB:2.50:Disreguard - Problem Quit Happening 9c



    Disreguard
    Mod please delete?

  • RELEVANCY SCORE 2.50

    DB:2.50:Problem With Recording Device dk



    Skype was working fine but after downloading a new version of Quick Player 7.1.1, Skype gives error of 'problem with recording device"

    DB:2.50:Problem With Recording Device dk

    very helpful followed your instructions and it worked perfectly thanks again

  • RELEVANCY SCORE 2.50

    DB:2.50:Android Wheel On Samsung Galaxy S2 Ics mz


    In our app we use Android wheel lib. Problem is on Galaxy SII. The wheel works only when user touch it, move his finger on the side (out of the wheel) and then scroll up or down. Have anyone this problem too and possible solution?

    DB:2.50:Android Wheel On Samsung Galaxy S2 Ics mz

    Hi,

    I tested this issue on WheelDemo application on
    Galaxy SII
    Android 4.0.3
    and in my opinion it works correctly.
    Could you give me more information or send me sample code on my email which reproduces this issue?
    Regards
    Konrad
    Samsung Developers


    This content has been quoted from c902249@s thought. (Link to original post)
    In our app we use Android wheel lib. Problem is on Galaxy SII. The wheel works only when user touch it, move his finger on the side (out of the wheel) and then scroll up or down. Have anyone this problem too and possible solution?

  • RELEVANCY SCORE 2.50

    DB:2.50:Dvr Recording Problem 1x



    when dvr is recording i cant watch in different channel

    DB:2.50:Dvr Recording Problem 1x

    Quote: Originally Posted by vivian28

  • RELEVANCY SCORE 2.50

    DB:2.50:Automating Mod Wheel Data After Midi Input d1


    Hi all,

    So what ive done is create a Bodyrox style patch on the ES2 and linked the mod wheel using the routing to cutt off 1+2 and Env3 release. I have inputed my midi via piano roll but not want to add the automation for the mod wheel so that I can open and close the feed to the cut offs and release through out the piece.

    I have a feeling I am over looking something really obvious, but isn't it always the way!

    Regards Craig

    DB:2.50:Automating Mod Wheel Data After Midi Input d1

    It's even easier to record Hyper Draw:

    Record over the existing MIDI region and move the Mod wheel... you'll record the CC data in Hyper Draw mode, which you can view in the Piano Roll by clicking on the Hyper Draw button (bottom left of Piano Roll).

    Here you can fine edit the Hyper Draw info if needed.

    Hope that helps
    Rounik

  • RELEVANCY SCORE 2.50

    DB:2.50:Help Setting Up Toggle Recording Using A Foot Pedal zj


    I have a very old korg wavestation keyboard.

    I was able to go into the function: toggle recording - and put that into learn MIDI - and then I hit the sustain pedal.

    - Now - I am able to toggle recording on and off by hitting the sustain pedal on my wavestation keyboard.

    - I would prefer to use one of the 2 pedal inputs 1 or 2 that can be set to things like - mod pedal or effects switch ( two things I won't really need) - and use a momentary switch foot pedal (I forget exactly what they should be called) ... and hopefully use this other foot pedal trigger the record toggle... the problem as I can't seem to get it to work - when I choose " learn MIDI " nothing comes in...

    *Question: does anyone know how to set up this secondary foot pedal to trigger the record toggle?

    DB:2.50:Help Setting Up Toggle Recording Using A Foot Pedal zj

    But this is a generation 1 korg - wavestation ... when I press the foot pedal I do not see any action in logic... - any ideas?

  • RELEVANCY SCORE 2.49

    DB:2.49:Recording Terminates 8p



    When recording Heartbeat recording stops before programme finishes. Have set time out from 5mins to 10 mins but still same problem. other recordings okay.

    DB:2.49:Recording Terminates 8p


    Try a planner rebuild:

    http://helpforum.sky.com/t5/Sky-HD-Recording-Playback/Sky-HD-System-Fault/ta-p/583396




    __________________________________________________________________________________________.

    If someone has helped you then please click on the LIKES button in their post.
    I do not work for Sky.

  • RELEVANCY SCORE 2.49

    DB:2.49:Next Mod Kart Dlc 9d



    No pic's yet.

    Princess Mod and Kart

    Princess will bring some royal class to the MRC! Don’t be fooled by Princess’ deceptively dainty style and kart, she has enough skills to rule the track and take the crown. This ModNation™ Racers Princess Mod AND Princess’ Kart bundle pack includes a fully-designed Mod, Kart, as well as several related parts and accessories for you to Create within the Mod and Kart Studios.

    Princess includes several Mod accessories for you to Create within the Mod Studio including a Tutu, Tiara, and Stampable Jewels. Kart parts for you to Create within the Kart Studio are a Carriage Body and Seat, Magic Mirror steering wheel, and Carriage Wheels for tires




    DB:2.49:Next Mod Kart Dlc 9d

    moriarty1975 wrote:

    kivi95 wrote:I want a track DLC

    I would rather see some of that too.

    Me 3




  • RELEVANCY SCORE 2.49

    DB:2.49:M90 Scroll Wheel Problem dd


    Hello Corsair Support,

  • RELEVANCY SCORE 2.49

    DB:2.49:Android Wheel On Samsung Galaxy S2 Ics 97


    In our app we use Android wheel lib. Problem is on Galaxy SII. The wheel works only when user touch it, move his finger on the side (out of the wheel) and then scroll up or down. Have anyone this problem too and possible solution?

    DB:2.49:Android Wheel On Samsung Galaxy S2 Ics 97

    Hi,

    I tested this issue on WheelDemo application on
    Galaxy SII
    Android 4.0.3
    and in my opinion it works correctly.
    Could you give me more information or send me sample code on my email which reproduces this issue?
    Regards
    Konrad
    Samsung Developers


    This content has been quoted from c902249@s thought. (Link to original post)
    In our app we use Android wheel lib. Problem is on Galaxy SII. The wheel works only when user touch it, move his finger on the side (out of the wheel) and then scroll up or down. Have anyone this problem too and possible solution?

  • RELEVANCY SCORE 2.48

    DB:2.48:Can I Reassign The Piano Pedals To The Volume Controller? kd


    My piano doesn't have a mod wheel that controls the volume, but I really need it. Is it possible to reassign the left and middle pedals that do send midi data, in Logic to a volume up and volume down midi send?

    DB:2.48:Can I Reassign The Piano Pedals To The Volume Controller? kd

    The logic file, right? Thanks for that, it works. I was wondering if it is possible to make it react faster so the slider can go faster up and down.

  • RELEVANCY SCORE 2.48

    DB:2.48:Midi Capture Recording Creates Take Folder Instead Of Overlapping Regions cc


    This is a very weird glitch that happens under a very specific set of circumstances, that I believe is caused by a bug in Logic. If anyone could shed light on it, it would be much appreciated.I normally record midi using the Capture Recording tool, which I find far more convenient (and less pressure) than actually hitting Record. I routinely record multiple passes on a single track, with Cycle both on and off. I'll often record different midi CC's on different passes, then merge the regions afterwards. Usually, this works with no issue.Today, for some odd reason, recording a second pass created a take folder. After doing some investigative work, it seems that this only happens, at least initially, when a midi controller is mapped to a specific control in the instrument. (I'll get back to the specifics in a bit.) Bizarrely, though, once that's happened, it seems to open the floodgates, where it starts randomly occurring on other tracks (both Instrument tracks and Midi tracks triggering external instruements), including on the first pass, which will randomly be split into multiple takes. (Even more infuriating, flattening those takes only preserves a section, making it almost impossible to retain the performance without extra work.)As for the details, this started happening using Heavyocity libraries (it happens with Evolve, Evolve Mutations 12, and Damage), loaded in Kontakt 5.1. When I use a midi CC that is mapped to one of the parameters on the instrument (e.g. CC74) and capture the recording, a take folder is automatically generated. If I use a controller that does nothing (e.g. mod wheel), a normal region is created. However, if I remap the parameter to the mod wheel, that then generates a take folder as well.Once this happens on one track, it starts happening on other tracks, including Stylus RMX, EXS24, and even midi tracks sending to a slave machine over ipMidi, including when recording just notes, and no controller data. Quitting and relaunching Logic usually fixes it for a little while, but then it will start happening again.I've verified that it's not caused by file corruption, which I initially suspected, by recreating it in a fresh empty template. I've also deleted and reset the Logic preferences to no avail.Under Project Recording Settings, MIDI Overlapping Regions is set to "Merge only in Cycle Record". (On a side note, how is there no option of "Record Normally" or "Do Nothing" here?!) In any event, I've tried switching this, but it doesn't resolve the issue.There is no complex routing going on in the Environment on any of these tracks.At this point, I've run out of ideas on how to fix this issue.ReuvenLogic Pro 9.1.8OS X Mountain Lion 10.8.22012 Mac Pro 12 core 3.06 GHz64 GB RAMRME HDSPe Raydat

  • RELEVANCY SCORE 2.48

    DB:2.48:Re: Error When Meshing And Simulating A Part! dc



    I have a problem when meshing my model.

    I get this text when the error is find:

    fem2esh - Make esh file from fem file for a specified design scenarioVersion 2014.00.00.0513-W64/X64 22-Feb-2013Copyright (c) 2013, Autodesk, Inc. All rights reserved.

    Version of fem2esh.exe : 2014.00000513Version of dcx1-win-x64.dll : 2014.00000513Version of femapi-win-x64.dll : 2014.00000513Version of agsdb_ar-win-x64.dll : 2014.00000513Version of tsx2tsy.exe : 2014.00000513

    Input Model : C:\Autodesk\2014-13-26\Ram_simulering.ds_data\1\dsInput File : C:\Autodesk\2014-13-26\Ram_simulering.femOutput File : C:\Autodesk\2014-13-26\Ram_simulering.ds_data\1\ds​.mod\group.eshLog File : C:\Autodesk\2014-13-26\Ram_simulering.ds_data\1\ds​.mod\group.ldxDesign scenario : 1Analysis type : Linear StressStart time : 2014/03/28-11:17:39

    --- Get 34 active element parts in range [1, 34] from fem file--- 1 enabled LC groups are defined--- Get 233086 points defined in range [1, 270785] from fem fileCalling the Surface Topology Generator (tsx2tsy)...tsx2tsy: Update part surface contact/bonding data (duration=1 sec.)Making interior points for midside nodes...--- Made 75209 interior points for midside nodesSet up nodal properties such as admissible BC etc. by adjacent elements...

    In working on FEM file for a FEA modelTerminal Error: FEM2ESH#63NO_3D_ELEMENT: please check meshing phase 112014/03/28-11:17:41

    Its a problem with part 11 (se picture below), there is a (i) marked on the part. What does this mean? And I get a error when meshing this part.

    And as you can se, the joint lookes wird at the nearest wheel. I dont know if its a bug or something but when i created the joint, I selected the area in the holes where the joint should run through. It should look like the other wheel but it dosent.. Is it just a bug or something wrong?

    DB:2.48:Re: Error When Meshing And Simulating A Part! dc


    Hi Medinh,

    Can you upload the model to look at?

    Thanks,

    James




    James KubliPlease marked this as solved if your question has been answered.

  • RELEVANCY SCORE 2.48

    DB:2.48:Exs24 Mod Wheel Assignment Possibility? kx


    Is there a way of assigning Velocity/Volume to the mod wheel in EXS24? I am trying to keep the Volume constant on one of my EXS24 samples but the sample I have loaded increases in Volume automatically. I want to keep it constant via the mod wheel (or change it to MY liking via the wheel). Is this possible in ESX? I can do it in K2 with no problem but can't figure out how to do it within the EXS24.
    Any suggestions are appreciated. Thanks.

    DB:2.48:Exs24 Mod Wheel Assignment Possibility? kx

    Set the slider to 100% and select the "inv" (the button turns orange) function for controller 1. Every available controller available in the menue can be assigned as a Source so it has nothing to do with the controller numbers you mentioned.

  • RELEVANCY SCORE 2.48

    DB:2.48:Cc#1 Resetting At The Start Of Every Loop - Bug ??? f9


    Make a 1 bars bas pattern, (internal or external synth with mod-wheel/CC#1 assigned to filter cut off) and loop it. On another track, same midi channel, i record a mod-wheel movement (filter sweep) more than 1 bar, say 4 bars, starting from 0 and moving to max. This is now a filter sweep with a length of 4 bars. Everytime the bas pattern repeat it self, (every 1 bar - because of the loop)the mod-wheel/CC#1 jumps back to zero, until it recieves the next mod-wheel info from the 4 bars sweep.

    I have to use "make loop into real copies or alias" to make it work.

    Is this a bug ?

    nice regards

    Henning Flintholm

    G5 dual 2.0 Mac OS X (10.4.8)

    DB:2.48:Cc#1 Resetting At The Start Of Every Loop - Bug ??? f9

    Hi Fred

    Thanks a lot for a fast answer

    nice regards

    Henning Flintholm

    www.flintholm.com

    G5 dual 2.0 Mac OS X (10.4.8)

  • RELEVANCY SCORE 2.47

    DB:2.47:Firefox Crashes With Error Msg: Plug-In Container Exe Has Encountered A Problem And Needs To Close. Mod Name: Mozallac.Dl x9



    Firefox crashes with error messages: plug-in container exe has encountered a problem and needs to close. Details: Mod User 32.0.3.5379 Mod Name: mozallac.dl

    Why does this constantly occur?

    DB:2.47:Firefox Crashes With Error Msg: Plug-In Container Exe Has Encountered A Problem And Needs To Close. Mod Name: Mozallac.Dl x9



    Start Firefox in Safe Mode {web link}
    While you are in safe mode;

    Type about:preferencesEnter in the address bar

    Select Advanced General.
    Look for and turn off Use Hardware Acceleration.

    Poke around safe web sites. Are there any problems?

    Then restart.

  • RELEVANCY SCORE 2.47

    DB:2.47:Xsi Mod Tool Problem 9s


    There is an error requesting Direct x 9b and I have a better version and it still displays the same error Help!

    DB:2.47:Xsi Mod Tool Problem 9s

    Have you tried re-installing the DX9 - Redistributable download? Not the web installer, but the full redist?

  • RELEVANCY SCORE 2.47

    DB:2.47:Assigning Organ To Work With Modulator xc


    I have a Oxygen 49 midi controller that has a mod wheel. When I use the Yamaha, I can use the mod wheel to cause the rotary wheel to speed up on the organ sound. Now that I swtiched to mainstage, I can't seem to get the same affect. I use the peachy Hammond sound on the midi. But when I use the mod wheel, nothing happens. I think I have to assign it to something. But I don't know what. I don't know if I should use the vibrato or the tremelo. When I use Mainstage's classic rock 3 sound with the main keyboard, I can press the pedal to get a similar affect of a rotary sound. But I would really like to use the wheel instead and it seems that only certain organ sounds will work with the wheel. Anyone successfullly do what I am asking?

    DB:2.47:Assigning Organ To Work With Modulator xc

    Okay, I think I have figured out a soultion.This assumes you are using MS3.1. Create a patch (without any channel strips).2. Go to the Channel Strip Inspector and select "Add Instrument Channel Strip".3. On the channel strip, where it says "Instrument", click once. This will bring up a drop-down of all of the plugins.4. Select "Vintage B3 Organ---Stereo", this will bring up the B3 window on the setting "Default".5. Press the "Rotor Cabinet" button and change the "Speed MIDI Control" parameter to "ModWheel".6. Click on the drop down menu where it says "Default" up at the top. Select "Save As Default".7. From this point on, any organ you add following steps 1-4 SHOULD keep your rotor setting.The key seems to be saving a user default, and then adding the strip in that way.Hope this helps.

  • RELEVANCY SCORE 2.47

    DB:2.47:Logic/Alesis Ion Question 7j


    Hi, I had an idea a while ago that I'd set up a mini studio at home and that I'd be writing tracks within seconds, recording every nuance and filter/resonance keyboard dial twist I cared to throw in to the mix.

    The problem is I can get the keyboard's mod wheels to record and play back data in Logic, but if I touch any other dial on the synth it records the data, but won't play it back. ie. The noise from the synth will stay the same on playback, not reflecting the changes I made to the sound while I was recording.

    Is there a way to assign this recorded data to certain parameters on the keyboard?

    DB:2.47:Logic/Alesis Ion Question 7j

    I can't find an Alesis Ion forum, that's why I posted here, on a general synth forum and elsewhere too but no-one seems to know how to do this.

    The Sysex tip might help though.
    From the Logic manual:
    Click the MIDI In button at the top left of the SysEx window. If the button is pressed,this means it is ready to receive incoming MIDI data.
    2 Alter the parameter on your device.
    3 The corresponding SysEx message will be displayed and the MIDI In button will switch off automatically.
    Another way is to type the SysEx string into the event list. (Consult your MIDI device manual for SysEx documentation). Use of this method qualifies you as a confirmed MIDI freak.

    Particularly like the last bit

    Message was edited by: unbelievabledave

  • RELEVANCY SCORE 2.47

    DB:2.47:Learning The "Learn" Function 3p


    The manual is no help so...Help!
    How do I get a plug or instrument to "learn" to be controlled by a specific controller. For example, if I want the Cutoff on Auto Filter to be controlled by my mod wheel, how would I do such a thing???

    thanks

    DB:2.47:Learning The "Learn" Function 3p

    The manual is no help so...Help!
    How do I get a plug or instrument to "learn" to be controlled by a specific controller. For example, if I want the Cutoff on Auto Filter to be controlled by my mod wheel, how would I do such a thing???

    thanks

  • RELEVANCY SCORE 2.47

    DB:2.47:Video Recording Problem In Nokia 6233 fz


    I am using a nokia 6233, and facing problem of recording video. when it starts recording, it automatically finishes recording after exactly one second!! anyone knows whats the bug?

    DB:2.47:Video Recording Problem In Nokia 6233 fz

    okay no, i solved this problem..the video clip length was set to default and i changed it to max in the camera settings.... wow, small problem, big correspondence!

  • RELEVANCY SCORE 2.47

    DB:2.47:Problem With The Mod Function In Excel 33


    =MOD((15*(1,4-1));6)
    returns 6,0 and
    =MOD((15*(0,4));6)
    returns 0,0

    I would like the first MOD function to return 0 as well. Is there a reason why Excel behaves like this? Do you experience the same problem in excel 2010?

    I could replace the function with a INT-test instead ( =(15*(1,4-1))-6*INT((15*(1,4-1))/6) ), but it would be nicer if MOD would work.

    Office 2010 - I did not experience the same problem in office 2003

    Thanks

    DB:2.47:Problem With The Mod Function In Excel 33

    HanV wrote:
    With =A1-6-0, we're back at -1.77636E-15. If must say that I find this behavior very confusing. What is the difference between =A1-6 and =A1-6-0?

    If you find it confusing, I'm sure my explanation did little to alleviate Jennie's confusion. My apologies for getting too mired down in details. To answer your question....

    Refer to the poor description of the dubious heuristic under the misleading title "Example When a Value Reaches Zero" in http://support.microsoft.com/kb/78113 [3].

    In short, sometimes Excel forces an arithmetic result to be exactly zero if it considers the result to be "close enough" to zero [1].

    The operative word is "sometimes". KB 78113 states that it is when "an addition or subtraction operation result in a value at or very close to zero". But that is imprecise.

    First, it applies to the last arithmetic operation of a formula, not to subexpressions [2].

    Second, it applies when the last operation is subtraction of two operands with the same sign or addition of two operands with opposite signs.

    Third, and this is the key: it applies when the last operation changes the result.

    Parentheses count as an "operation" in this context. So =A1-6 is zero, but =(A1-6) is not zero, just as =A1-6-0 is not zero. The last operation, right parenthesis or -0, does not change the result.

    Don't try to make sense of that. It does not, IMHO. It is just the way it is.

    Bottom line: If you want to know the true value of an expression that might be close to zero, always append -0 to it.

    -----
    Endnotes

    [1] Let's not get into the definition of "close enough". To my knowledge, Microsoft never documents the criteria. I have deduced some of my own; but they are too complicated to explain, and they might be incomplete.

    [2] The "close to zero" heuristic also applies to comparisons of the form x=y, which we can think of x-y compared to zero.

    Generally, I don't believe this heuristic applies to Excel functions. But recently, I discovered that SUM has its own heuristic for changing
    some "close to zero" results to exactly zero. Too difficult to explain. Suffice it to say: IMHO, it is even more fickle than the addition/subtraction rule in KB 78113.

    [3] It is a "poor" description because it is incomplete and imprecise.

    It is a "dubious" heuristic because it is not applied consistently, leading to many seemingly inexplicable conditions. For example IF(A1=6,TRUE) is TRUE and =A1-6 is exactly zero, but IF(A1-6=0,TRUE) is FALSE.

    It is a "misleading" title because the heuristic is not limited to results that are "close to zero". For example, if A1 is =2^104+2^52, =A1-2^104 results in exactly zero, but =A1-2^104-0 demonstrates that the result is 2^52, which is obviously not "close to
    zero".

  • RELEVANCY SCORE 2.47

    DB:2.47:Uccx Recording Step Returns Success, But The Recording Is Empty 79



    I have a weird problem on a new UCCX install. (10.5)

     

    When recording a prompt using the recording step, I am immediately trying to play the recording back, and it is silence / empty.  I can upload the recording ok, but the uploaded file is always 0.06KB regardless of how long I try to record the prompt.

     

    Any ideas?

     

     

    DB:2.47:Uccx Recording Step Returns Success, But The Recording Is Empty 79


    Ooops. I'm so sorry. Yes, it is the same issue. It looks like I was too keen and posted at the same time as a colleague.

     

    Please disregard this post.

     

    Apologies.

  • RELEVANCY SCORE 2.47

    DB:2.47:Problem For Audio Driver Windows 7 For Thinkpad Mod. R51 z1


    HI ,I CANNOT FOUND THE AUDIO DIRVER FOR WINDOWS 7 FOR THINKPAD MOD. R51 .CAN YOU HEL ME , PLEASE ?REGARDS

    DB:2.47:Problem For Audio Driver Windows 7 For Thinkpad Mod. R51 z1

    there is no windows 7 driver for such an old machine. But try to let windows update to find some compatible driver for you.



    Regards,Jin LiMay this year, be the year of 'DO'!I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • RELEVANCY SCORE 2.47

    DB:2.47:Capturing Screen Video With Quicktime Screen Recording 8s


    I've just found that Quicktime can record everything on the screen. This is very useful as I want to produce some training videos that are based on web-browsing. The problem is that I want to be able to zoom in on parts of the screen and I saw elsewhere a trick that invloved using Universal Access to Zoom in with either the mouse wheel or Keyboard. The problem is that these zooms don't appear to be recorded in Quicktime. Is that correct, or am I missing something?many thanks

    DB:2.47:Capturing Screen Video With Quicktime Screen Recording 8s

    captfred-- Can you help with this from an Oct 2010 post? I'm having the same trouble in OS 10.6.8--random dropouts in QT Screen Recordings using QT Player 10.0 (131). The original poster said the problem only happens when recording sound, but I need sound. If you can help, please email me at blockard @@ iname . com. Thanks!"Sometimes it records fine and I end up with a full recording, sometimes the middle is gone, sometimes just the end. The file size doesn't seem to matter; I have some good recordings that are nearly 500MB, and some that failed when they are only 30MB (and I have well over 300GB free)."

  • RELEVANCY SCORE 2.47

    DB:2.47:Conversion Problem jp



    Why won't my pdf convert to word?- the wheel keeps spinning.

    DB:2.47:Conversion Problem jp


    The free Adobe Reader cannot convert PDF files to any other format. If you are talking about ExportPDF, the forum to ask is here:

    http://forums.adobe.com/community/exportpdf

  • RELEVANCY SCORE 2.47

    DB:2.47:N81 8gb Navi Wheel Problem am


    I have bought recently Nokia N81 8GB i have switched on Navi wheel settings but still its not working, could this problem be solved by updating the firmware? please help






    Solved!
    Go to Solution.

    DB:2.47:N81 8gb Navi Wheel Problem am

    send it to nokia care centre so if firmware did not work




    If i have helped at all a click on the white star below would be nice thanks.

    Now using the Lumia 1520

  • RELEVANCY SCORE 2.46

    DB:2.46:Problem Using The Scroll Wheel In Itunes 7.4.3.1 17


    I cannot use the scroll wheel since I installed this version of iTunes on Vista. Has anyone experience this problem and did you find a solution?

    DB:2.46:Problem Using The Scroll Wheel In Itunes 7.4.3.1 17

    Found a solution now for me - I deinstalled MS IntelliMouse, now it works!

    See here: http://support.microsoft.com/kb/828677/en-us

  • RELEVANCY SCORE 2.46

    DB:2.46:Audio Recording Problem 38



    Hi all,

    Can any one suggest me the code to implement audio recording!

    How to implement audio recording!




    Thanks Regards,Kumar Shivam

    DB:2.46:Audio Recording Problem 38

    Here I give a sample program example which will recode the audio and saved it on server and play from ithttp://blackberryaudiorecording.blogspot.in/

  • RELEVANCY SCORE 2.46

    DB:2.46:Ut3 Mod Import Problem k7



    Can someone help, whenever i try to import a mod on ut3, it recognises the mod, then it imports it then nothing appears in my content. Sometimes it also crashes on the unpacking mod process. Can someone please help. Ive tryed wiping the ut3 data and it doesnt work.




    PSN / Steam - Chas19, My Flickr

    DB:2.46:Ut3 Mod Import Problem k7

    im getting the mods from the internet, but ill try using the browser



    PSN / Steam - Chas19, My Flickr

  • RELEVANCY SCORE 2.46

    DB:2.46:Problem : Skype Muting When I Talk In-Game On Garrys Mod xj



    whenever i play garrys mod 13, and i rpess the talk button for garrys mod skype mutes, and i have to reopen skype for it to work again, PLEASE HELP!!!

    DB:2.46:Problem : Skype Muting When I Talk In-Game On Garrys Mod xj


    I have the same problem, did you resolve your problem yet?

  • RELEVANCY SCORE 2.45

    DB:2.45:How To Automate Wah Pedal In Pedalboard Lp9 ? a7


    How do I automate the Wah Pedal plug (pedal position), in the Pedalboard plug of LP9?

    I assign CC1 mod wheel to control the pedal position fine, it controls what I want it to (pedal position, this isn't the problem). It records the automation with CC1 I can clearly see the automation I've written when opening up the View Menu- View Automation... it's right there plain as day ( Wah Pedal Position Automation Nodes )

    But play back the track Wah Pedal is not receiving the automation (even when changing the tracks automation button to "Read, Touch or Latch"

    DB:2.45:How To Automate Wah Pedal In Pedalboard Lp9 ? a7

    Can't find anything in the LP9 on-line manual that specifically deals with automating the new pedalboard effects

    Maybe Wah Pedal does not respond to CC1? I find that highly unlikely..

  • RELEVANCY SCORE 2.45

    DB:2.45:Controlling Mulitple Parmeters From One Modulation Source Problem 9c


    Hi,

    I am trying to control "multiple parameters" of the ES 2 from "one" modulation source (my breath controller). I go into learn mode and it indeed works for the first assignment but if I click on another parameter the new parameter is controlled by the breath controller and the first one I assigned is gone. It seem like Logic will not let me assign more than 1 parameter to the breath controller. I did test assigning different controllers like Mod Wheel then breath controller to two different parameters and that did work.

    So am I doing something wrong or will Logic only let you use one mod source per parameter?

    Thanks!

    DB:2.45:Controlling Mulitple Parmeters From One Modulation Source Problem 9c

    Thanks..The matrix solution is a good idea. The only problem with that is that I wanted to control the "Drive Parameter" as well as the Filter Cuttoff of the ES2. I could not find the
    "drive Parameter" as an option in the matrix editior. Not sure if I missed it but I will look again and see if Drive is listed.

    So what I was trying to do is use the "learn controller" to set the BC for the drive parameter and then use the Matrix Editior for everything else. The problem once again is that I could not use the Learn Control with the Breatth controller and combine that with BC settings in the matrix.

    Thanks for your help. If you have any other suggestions please let me know.
    Dave

  • RELEVANCY SCORE 2.45

    DB:2.45:Better Choices For Midi Keyboard Controllers? df


    What are some of you using?
    I am looking at some AKAI and EMU units.
    Something that will run plug ins and synths in logic 9...
    Mod and pitch wheel would be cool.

    akai mpk49 any good?

    DB:2.45:Better Choices For Midi Keyboard Controllers? df

    I hear the AKAI MPK is a little tougher and better quality. I'd go with that but my only concern is are all the knobs and sliders programmable within logic? I do have an MPC so I am also debating getting something with just keys -

  • RELEVANCY SCORE 2.45

    DB:2.45:Search Here... Skype Call Failed: Problem With Recording Device. zp



    Skype Call Failed: Problem with recording device. Anybody knows how to fix it up?

    DB:2.45:Search Here... Skype Call Failed: Problem With Recording Device. zp


    Please run this FixIT.

    Automatically diagnose and fix Skype audio and webcam issues

    try to set the sound input to microphone.

    In the call, Click Call quality Microphone Set the input to your microphone.




    Regards,Tamim__________________________________________________________________________________________Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hourIf one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • RELEVANCY SCORE 2.45

    DB:2.45:Ut3 Mods 1 At A Time m1


    is everybody else having this problem that they can only put 1 mod onto the ps3 at a time when i put on the playground mod it was on the deathmatch list then i put on the metal mod and the playground mod was gone if this is all you can put on 1 mod at a time i really hope they change it

    DB:2.45:Ut3 Mods 1 At A Time m1

    yeah, and you can use more than one at a time too



    Gamertag - yeilams

  • RELEVANCY SCORE 2.45

    DB:2.45:The Midi Side cm


    I know that Logic is great for audio recording and is user friendly but how about the MIDI side? I remember MIDI was a once a week point in Logic. Has Apple made it competitive with other DAWs MIDI features. How does it compare with say Digital Performer, Sonar, Reaper or Cubase for editing in the piano roll. I use Garritan Personal Orchestra which requires a lot of modulation editing with all but the percussive instruments, either penciled in or over-dubed using the mod wheel. I bought digital Performer 6 a few years ago but it's way too confusing compared to the DAW I have been using. Is Logic a good tool for composing with software instrument?

    DB:2.45:The Midi Side cm

    That's good infomation to know. Thanks!

  • RELEVANCY SCORE 2.45

    DB:2.45:Stats Not Updating Info d3


    according to a mod on myresistance.net the servers are recording stats not displaying them, should be sorted soon though.

    DB:2.45:Stats Not Updating Info d3

    all stats! this has now been fixed!

  • RELEVANCY SCORE 2.45

    DB:2.45:Screen Recording dk


    This is probably a blatantly obvious one but it's making my head hurt.On Snow Lion when I used to do screen recording/web casts I could use the zoom with scroll wheel/mouse and it would be recoreded in the video. Example in my video here: http://www.youtube.com/watch?v=VTgXIWQlMMoNo when I do screen recording in LION it totally ignores the zoom.... Anyone know how to enable it so the zooming is recorded please?Thanks

    DB:2.45:Screen Recording dk

    This is probably a blatantly obvious one but it's making my head hurt.On Snow Lion when I used to do screen recording/web casts I could use the zoom with scroll wheel/mouse and it would be recoreded in the video. Example in my video here: http://www.youtube.com/watch?v=VTgXIWQlMMoNo when I do screen recording in LION it totally ignores the zoom.... Anyone know how to enable it so the zooming is recorded please?Thanks

  • RELEVANCY SCORE 2.45

    DB:2.45:Nokia N79 Navi-Wheel Problem. jd



    my nokia n79's navi wheel isnot working. its on from setting, navi light is glowingaroundcenter button but navi wheel is not give anyresponse. my software version is 32.001, its a t-mobile unlocked fone.

    DB:2.45:Nokia N79 Navi-Wheel Problem. jd


    Here are a couple of things to try (in this order):

    Turn off phone, remove battery for 5 seconds, replace, turn on phone.

    Adjust naviwheel setting to OFF, leave Settings application (return to standby), then open up Settings once more on turn naviwheel back on.

    The naviwheel, as you might know, does not work across all applications; nor does it work beyond a certain "depth" of menus. You should test it at the "root" (first) level of the Menu application. If it doesn't work there, perhaps you need to back up your settings and data and reinstall your phone software. But first: do you have any applications which allow for key shortcuts or special key mappings? There could be a conflict there.

    Finally, there have been problems with an electrical component behind the naviwheel, but this is more commonly associated with a general keyboard lockup.

    Good luck, and maybe someone else will have some additional suggestions...

  • RELEVANCY SCORE 2.45

    DB:2.45:G25 Mod mf



    I was wondering if anyone knows if the RA functions off the GT Force Steering Wheel can be made so i can use them with my G25 Setup ?

    DB:2.45:G25 Mod mf


    I was wondering if anyone knows if the RA functions off the GT Force Steering Wheel can be made so i can use them with my G25 Setup ?

  • RELEVANCY SCORE 2.45

    DB:2.45:Recording Device a3



    I have a problem with the recording device What to do?????

    DB:2.45:Recording Device a3

    Which Mac device are you using?Any (USB?) audio devices that you have connected to your computer?Check Skype Preferences to verify that the correct recording device is selected.



    ↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

  • RELEVANCY SCORE 2.45

    DB:2.45:Korg Kontrol49 Mod Wheel + Logic 8 7m


    Has anyone figured out how to get the mod wheel to work in Logic 8? I've read a few posts but the replies seem to be 'RTFM' or the need for a hack / additional software to make the mod wheel work...

    I'm new to MIDI controllers (though not a complete idiot...)

    I see where I can set up the K49 as a control surface, and has a learn function, but the mod wheel ends up being 'pan'.

    Any help would be appreciated, as it seems the manual for the K49 was written before Logic 8.

    DB:2.45:Korg Kontrol49 Mod Wheel + Logic 8 7m

    Has anyone figured out how to get the mod wheel to work in Logic 8? I've read a few posts but the replies seem to be 'RTFM' or the need for a hack / additional software to make the mod wheel work...

    I'm new to MIDI controllers (though not a complete idiot...)

    I see where I can set up the K49 as a control surface, and has a learn function, but the mod wheel ends up being 'pan'.

    Any help would be appreciated, as it seems the manual for the K49 was written before Logic 8.

  • RELEVANCY SCORE 2.45

    DB:2.45:Garrys Mod Crashes 7j


    Problem signature:

    DB:2.45:Garrys Mod Crashes 7j

    Problem Event Name: BEX -
    This is (yet another) one of those errors that can be caused by many things.
    One option is to change your Data Execution Prevention (DEP) to the second option -
    "Turn on DEP for all programs and services except those I select" and add HL2 and Garry's Mod to the list. "

    To access DEP go to Control Panel System Advanced system settings Performance Data Execution Prevention.
    I have not had to do this personally when modding HL2 or any other game. It may be one of the benefits of not installing games to the default location - Program Files (x86).
    I do know that not installing games to the default location is helpful with other 'permissions' issues .

    Another option is to run from Clean Boot and see if there is a conflicting software or process -
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Or - Uninstall Gary's Mod and then go to the HL2 folder (Steam Appsyour user name folder) and R/click on the folder. Then go to PropertiesPrevious Versions and restore HL2 to a time before installing Gary's Mod.
    Then after rebooting your machine try installing Gary's Mod again.

    Still no luck ? - try the Steam forums.
    .