• RELEVANCY SCORE 3.80

    DB:3.80:Nvidia Graphics Card Burn Out - Known Problem? 78





    I have a VGC-LA1 model that has been diagnosed with a NVIDIA graphics card burn out - I have heard that this is a known problem and would welcomesuggestions on the best way forward







    Solved!
    Go to Solution.

    DB:3.80:Nvidia Graphics Card Burn Out - Known Problem? 78

    Sony has acknowledged problems with the nVidia chip fitted in certain models. The VGC-LA1 is not one of these models.

    Here's the list of Sony Vaio models affected:

    VGN-FZ11x, VGN-FZ18x, VGN-FZ21x, VGN-FZ31x, VGN-FZ38x,

    VGN-AR11x, VGN-AR21x, VGN-AR31x,

    VGN-C1Zx, VGN-C2Zx,

    VGC-LM1xx, VGC-LM2xx,

    VGC-LT1xx, VGC-LT2xx.

    I can only suggest that you contact one of Sony repair partners for an idea of repair cost. It will not be cheap as the chances are a new motherboard will be needed.

    http://support.vaio.sony.eu/computing/vaio/contact​s/asc.aspx?l=en_GBm=VGC-LA1




    Go n-éirí an bóthar leat

  • RELEVANCY SCORE 3.62

    DB:3.62:Nvrm: Rminitadapter Failed! (Hardware Problem?) [Solved] cm





    Fairly recently, an older i686 box I have cannot load X but displays the bootup info, and non-graphical login prompt just fine. The video card is an nVidia 8400GS. After googling around for several of the dmesg errors, and not finding much of relevance, I am starting to wonder if the card itself is bad. Anyone with experience is welcomed to chime in with suggestions.

    I have tried:* Moving the card to another PCI slot.* Both the linux/nvidia and linux-lts/nvidia-lts packages.* Chapter 8 of the nvidia README recommends several kernel bootline mods, none of which work.

    LinksComplete dmesg: http://pastebin.com/J0y8yKT6Complete /var/log/Xorg.log: http://pastebin.com/iCkq9kM5

    Relevant drivers:
    % pacman -Qs nvidia
    local/libvdpau 0.7-1
    Nvidia VDPAU library
    local/nvidia 325.15-8
    NVIDIA drivers for linux
    local/nvidia-libgl 325.15-1
    NVIDIA drivers libraries symlinks
    local/nvidia-utils 325.15-1
    NVIDIA drivers utilities

    DB:3.62:Nvrm: Rminitadapter Failed! (Hardware Problem?) [Solved] cm


    Reporting in. 331 still has the same issue with kernel version 3.12.3-1 . Has there been a bug opened on Nvidias side? Im going to see if 304 still works.

  • RELEVANCY SCORE 3.60

    DB:3.60:Nvidia Geforce 8400 M pf





    hello i have some problem like this video with my nvidia card

    http://www.youtube.com/watch?v=8Z9ZRG6190k

    can you help please

    DB:3.60:Nvidia Geforce 8400 M pf

    Hello johnpereze!

    There are no available drivers for the NVIDIA Geforce 8400 m on your computer running on Windows 7 32bit. You would have to make due with what was installed when you installed Windows 7 on your computer.

  • RELEVANCY SCORE 3.59

    DB:3.59:Problem With Preinstalled Nvidia Gx5200 128meg Video Card ms


    Hi all,

    DB:3.59:Problem With Preinstalled Nvidia Gx5200 128meg Video Card ms

    Sounds to me like you have already solved your problem, but don't want to face the fact that you video card has gone bellyup. Yes the 96MB of RAM is shared system RAM.

    Dell Demension 8400
    3.0GHz HT P4 processor
    250 GB SATA HD
    ATI 300SE 128MB RAM PCI Express Video Card
    1901FP 19 Flat Panel
    NIC card
    DVD+RW 16X Drive
    DVD ROM drive
    56K Modem
    Windows XP SP2 OS
    1 GB DDR2 533MHz memory
    Sound Blaster Audilogy Sound Card

    Dell XPS T850r
    512 MB RAM
    Nvidia GeForce 3 64MB RAM Video card
    20 GB IDE HD
    30 GB IDE HD
    17 Quantex CRT Monitor
    NIC Card
    DVD-/+RW 16x
    CD-RW Drive
    Sound Blaster Live Audio
    Windows XP SP2 OS

    Dell Inspiron 8100
    1.13 Pentium III M processor
    512 MB Ram
    30 GB HD
    15 Screen
    DVD Rom Drive
    CD-RW 8X Drive
    Linksys Wireless Adapter
    Windows XP SP2 OS

    All systems networked using Linksys Wireless Router.

  • RELEVANCY SCORE 3.50

    DB:3.50:[Solved] My Display Got Mad! Black Space Under It! c8



    Hi guys,I dont even know how to explain my problem. Yesterday I upgraded nvidia drivers with nvidia-utils-bumblebee package to 302.17 version, and today I found my display moved upward, with a black space at the bottom. Im using xmonad. Ive never had a problem like this. Ive always used nvidia-bumblebee and nvidia-utils-bumblebee drivers, but yesterday I removed nvidia-bumblebee and installed the official nvidia driver, so maybe this problem is due to this different configuration.What can I do to solve it?

    Last edited by fabrydrunk (2012-06-27 09:26:33)

    DB:3.50:[Solved] My Display Got Mad! Black Space Under It! c8


    I always look into /var/log/Xorg.0.log for the start...

    Edit: well... It should be a rule of thumb to ask for help only if we have already done our best to eliminate any PEBKAC possibility...

    Last edited by bohoomil (2012-06-27 09:28:20)

  • RELEVANCY SCORE 3.42

    DB:3.42:Graphics Card fd



    vpccw21fx with windows 7 home 32 bit doesn't know I have the nvidia geforce with cuda card. How can I fix this??? I have the 310.61 beta driver but won't install cause it does it know I have a card. Please help...







    Solved!
    Go to Solution.

    DB:3.42:Graphics Card fd


    Yeah, Nvidia says to check Sony...

    But this site shows how to take the Sony Vista drivers and the Nvidia Win 8 Drivers and 'merge' them to create Sony Win 8 merged drivers that work, (Though I haven't tried it yet, but today will be the day)

    http://www.technoish.com/1137/fix-latest-nvidia-mobility-driver-to-fit-your-notebook/comment-page-3/

    Make Nvidia drivers work with 8111L

    Seems like a 'poor move' to exclude a perfectly good laptop because of a simple driver update. The rest of the drivers work fine with the Sony and Windows 8, but the display driver is "Basic Windows" driver and Nvidia sees the hardware, identifies it, but when you get the driver it tells you it can't see it now, contact Sony...

    so it seems like Sony has 'blocked' updates.

  • RELEVANCY SCORE 3.34

    DB:3.34:Graphics Card 8p



    i have a all in one computer with a nvidia 310m graphics card but cannot find a updated driver that works ones on nvidia website dont .







    Solved!
    Go to Solution.

    DB:3.34:Graphics Card 8p

    Hi n1ck21,

    If there is an updated driver that has been tested and released by Sony you will find it on the support site under your model.

    http://support.vaio.sony.eu/computing/vaio/index.a​spx?l=en_GB

    The drivers released by NVIDIA will not install on your Vaio without a modified inf file. If you want to install drivers released by NVIDIA then have a look at the following link – this is of course at your own risk.

    http://www.laptopvideo2go.com/drivers

    Be sure to read the Quick Start Guide.

    Rich




    Go n-éirí an bóthar leat

  • RELEVANCY SCORE 3.33

    DB:3.33:T510 - Dual Graphics Card a9


    I have bought a T510 with an Intel HD Graphics card and an NVIDIA NVS 3100M Optimus graphics card running Windows 7 64-bit.How do I switch between the usage of both graphics cards ? I only just discovered that the Intel HD Graphics card is being used, which seems a waste when I have the NVIDIA card.Thanks







    Solved!
    Go to Solution.

    DB:3.33:T510 - Dual Graphics Card a9

    dazdaz wrote:I would assume that the NVIDIA card has a higher refresh rate. The Intel HD gfx card hurts my eyes at 1920x1080 at 60Hz.Is there an application installed to manage the NVIDIA Optimus technology, is Optimus more like an API.How do I force the OS to use the NVIDIA card, my eyes are more important than battery life.And you would be wrong, the max refresh rate is detected off the LCD itself. If you were to attach an external monitor that has a higher refresh rate you would be able to select it. 60Hz is standard for TN panels.

  • RELEVANCY SCORE 3.31

    DB:3.31:No Shadows On Windows 8.1 Geforce Gtx880m px



    SOLVED! I managed to turn off the Intel Card by clicking fn+f5 this rebooted my system with only NVidia Card enabled and all is running great!!!

    DB:3.31:No Shadows On Windows 8.1 Geforce Gtx880m px



    Ok, I have found out that in DirectX 11 Unity is not detecting my Nvidia card



    Please submit a bug report following these guidelines and our QA team will investigate further:


    http://blogs.unity3d.com/2009/04/15/bug-reporting-and-you/

  • RELEVANCY SCORE 3.27

    DB:3.27:[Solved] Nvidia Artefacts On Text While Browsing Web kd



    Hey,

    I have nVidia 7300GT card with nvidia-304xx drivers and some webpages look like this:

    Before I used noveau drivers but had problems with flashplayer so I changed to proprietary again. My card is marked as legacy since Valves cooperation with nvidia. Any ideas?

    Last edited by mkkot (2012-12-02 16:48:58)

    DB:3.27:[Solved] Nvidia Artefacts On Text While Browsing Web kd


    Or you can rebuild the xorg-server package after commenting out the line where the patch is applied in the PKGBUILD. On a related issue, with the rebuild server, there are no performance issues in firefox or thunderbird either.

  • RELEVANCY SCORE 3.26

    DB:3.26:Nvidia Nview Problem zx



    Hello all!

    I am facing a problem with my graphics card. It all started when I decided I would like to watch my dvds on my tv screen. I have an nvidia graphics card.
    $lspci
    .....
    01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
    $

    DB:3.26:Nvidia Nview Problem zx


    It seems everything has already worked out fine for everyone, but I just felt I should mention nv-tv... quite nifty little app that with a keypress will switch the output to the TV and with another switch it back to the CRT. Changes resolution and everything without having to edit a line in X.

    http://sourceforge.net/projects/nv-tv-out/

  • RELEVANCY SCORE 3.24

    DB:3.24:[Solved] Gnome Shell 3.6 Themes Are Ugly x9



    hi, i have a problem with gnome-shell, i installed a theme in gnome-shell, and gtk theme, but windows are similar to the windows 95, and gnome-shell theme not work property.

    hi have nvidia graphic card and nvidia property drivers.

    and sometimes gnome-shell is freezing.

    Last edited by emanuelx (2012-11-10 17:12:28)

    DB:3.24:[Solved] Gnome Shell 3.6 Themes Are Ugly x9

    emanuelx wrote:
    tanks, i installed gtk-engine-murrine now works fine

  • RELEVANCY SCORE 3.24

    DB:3.24:Nvidia/Bumblebee Not Working With Rootless X.Org [Solved] 7j



    Hi!

    Ive been having problems running programs on my NVidia discrete graphic card through bumblebee (I use the proprietary drivers) since X.org 1.16. Ive traced the root of the problem to X being run in rootless mode (I start X from a console after logging in, no kdm/gdm/... here), and so I disabled rootless execution through /etc/X11/Xwrapper.config, by setting:
    needs_root_rights = yes

  • RELEVANCY SCORE 3.23

    DB:3.23:Graphics Card Updation kf



    my bluetooth problem was solved. thank you so much
    NVIDIA graphics card working. my system shows updation is available. when i click updation, it shows "installation cannot be continue".

    DB:3.23:Graphics Card Updation kf

    dhinakaran wrote:
    can u suggest the link to download the driver

    HI,

    To help us answer question quicker, please read this: http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/HelloRegards.

  • RELEVANCY SCORE 3.23

    DB:3.23:Xlib: Extension Glx Missing On Display :0.0 With Optimus cd



    Hi

    I have a few problems with my hybrid video cards (Intel HD4000 and Nvidia 630M). I followed the steps in this wiki https://wiki.archlinux.org/index.php/Bumblebee and I tried to install all with: pacman -S nvidia nvidia-utils nvidia-libgl (all related with my intel video card is in my system). Also I have installed primus-git, bbswitch-git and bumblebee-git.

    But the first problem that I had when I installed the Nvidia driver is, it shows me a conflict between mesa-libgl and nvidia-libgl. I solved this (for now) running pacman -Sdd nvidia-libgl but it removes mesa-libgl and without it I cant use my intel video card with GLX aceleration and I need it. How to avoid this conflict?

    The second thing is my Nvidia card and bumblebee. After all, when I run optirun glxgears -info I get this error:
    Xlib: extension GLX missing on display :0.0.
    Xlib: extension GLX missing on display :0.0.
    Error: couldnt get an RGB, Double-buffered visual

    DB:3.23:Xlib: Extension Glx Missing On Display :0.0 With Optimus cd


    Thanks for the answer sano. I installed the mesa-libgl and lib32-mesa-libgl (I forgot to mention that my system is x86_x64) with the command pacman -Sdd mesa-libg lib32-mesa-libgl and that automatically removes the lib32-nvidia-libgl and nvidia-libgl without problem.

    Now I run glxgears -info and shows me the GLX test and it gives me about 60FPS with the Intel. If I run primusrun glxgears -info it gives me the same 60FPS (thats extrange I think, should be more). Same thing for glxspheres and/or using optirun instead primusrun.

    I ran some games, mostly from Steam and the diference between the Intel and the Nvidia is waaaay too long (in terms of performance). So, I think bumblebee is working fine and is using the Nvidia.

    Problem Solved. Thanks.

  • RELEVANCY SCORE 3.22

    DB:3.22:Z570 Ideapad Graphics Cards Issue a9


    anyone could help me with this issue ?i've got such problem that my grphics cards not detected as it should to?the NVIDIA graphics card not worked when i installed games such PES2012 .the NVIDIA grpahics not detected,but it only using INTEL grpahics card.anyone please help me out ,thank you .







    Solved!
    Go to Solution.

  • RELEVANCY SCORE 3.21

    DB:3.21:Nvidia/Msi 61.77 Drivers xj




    Hi

    I just downloaded both the Nvidia and MSI 61.77 Drivers, I have the MSI 5900XT VTD 128MB Card, and this card is not even listed in the Readme.txt. How safe is it to use the above mentioned drivers. Currently I'm using the Drivers which came on the CD along with the card i.e 56.xx version. Any help is appreciated.

    Readme.Txt:

    NVIDIA Display Driver for Windows 2000/XP version 61.77, 07/15/2004
    ================================================================================

    Operating systems supported
    ---------------------------
    Microsoft Windows XP Home
    Microsoft Windows 2000/XP Professional
    Microsoft Windows 2000 Server

    Adapters supported
    ------------------
    NVIDIA RIVA TNT
    NVIDIA RIVA TNT2
    NVIDIA RIVA TNT2 Pro
    NVIDIA RIVA TNT2 Ultra
    NVIDIA Vanta
    NVIDIA Vanta LT
    NVIDIA RIVA TNT2 Model 64
    NVIDIA RIVA TNT2 Model 64 Pro
    NVIDIA Aladdin TNT2
    NVIDIA GeForce 256
    NVIDIA GeForce DDR
    NVIDIA Quadro
    NVIDIA GeForce2 MX
    NVIDIA GeForce2 MX 200
    NVIDIA GeForce2 MX 400
    NVIDIA Quadro2 MXR
    NVIDIA Quadro2 EX
    NVIDIA GeForce2 GTS
    NVIDIA GeForce2 Pro
    NVIDIA GeForce2 Ti
    NVIDIA GeForce2 Ultra
    NVIDIA GeForce2 Integrated GPU
    NVIDIA Quadro2 Pro
    NVIDIA GeForce4 MX 420
    NVIDIA GeForce4 MX 440
    NVIDIA GeForce4 MX 440-SE
    NVIDIA GeForce4 MX 460
    NVIDIA Quadro NVS
    NVIDIA Quadro4 500 XGL
    NVIDIA Quadro4 550 XGL
    NVIDIA GeForce4 MX Integrated GPU
    NVIDIA GeForce4 MX 420 with AGP8X
    NVIDIA GeForce4 MX 440 with AGP8X
    NVIDIA GeForce4 MX 440SE with AGP8X
    NVIDIA Quadro4 NVS with AGP8X
    NVIDIA Quadro4 380 XGL
    NVIDIA Quadro4 580 XGL
    NVIDIA GeForce3
    NVIDIA GeForce3 Ti 200
    NVIDIA GeForce3 Ti 500
    NVIDIA Quadro DCC
    NVIDIA GeForce4 Ti 4200
    NVIDIA GeForce4 Ti 4400
    NVIDIA GeForce4 Ti 4600
    NVIDIA GeForce4 Ti 4200 with AGP8X
    NVIDIA GeForce4 Ti 4800
    NVIDIA GeForce4 Ti 4800 SE
    NVIDIA Quadro4 700 XGL
    NVIDIA Quadro4 750 XGL
    NVIDIA Quadro4 900 XGL
    NVIDIA Quadro4 780 XGL
    NVIDIA Quadro4 980 XGL
    NVIDIA GeForce FX 5800
    NVIDIA GeForce FX 5800 Ultra
    NVIDIA Quadro FX 1000
    NVIDIA Quadro FX 2000

    Where is my card listed above ???

    Thanks
    Rajiv

    DB:3.21:Nvidia/Msi 61.77 Drivers xj


    best driver for 5900xt in terms of image quality is 53.03
    best drivers for higher frames is 66.00

  • RELEVANCY SCORE 3.21

    DB:3.21:[Solved]Nvidia Drivers df



    I run ArchLinux x86_64 and Wine. In order to run Wine games I have to have lib32-Nvidia-Utils installed.I run the beta Nvidia Drivers, and my 64bit Nvidia driver version isnt matching up with my lib32 Nvidia drivers and thats giving me problems.Ive searched for a lib32-nvidia-utils 173.14.05 package but I couldnt find one.Then I looked in the official 32bit testing repository and found Nvidia-utils 173.14.05 (32 bit version)Could I just rename this 32 bit Nvidia-Utils package to Lib32-Nvidia-Utils and install it, and have everything work just fine?Thanks in advance, Coda.

    Also, the reason I run beta Nvidia drivers is because my card is relatively new and I need these beta drivers for my card to work well.

    Last edited by DeeCodeUh (2008-05-30 03:00:57)

    DB:3.21:[Solved]Nvidia Drivers df


    I cant find the nvidia-utils in the testing branch. Am I blind or is ftp://ftp.archlinux.org/testing/os/i686/ the wrong place?

  • RELEVANCY SCORE 3.21

    DB:3.21:Satellite L50 Nvidia Was Not Detected m3



    Hello,

    I have been using the laptop for about 4 months now. At first, the NVIDIA works fine. But recently when I click the NVIDIA icon, it said "An NVIDIA graphics card was not detected in your system". I couln't find it in ComputerManageDevice ManagerDisplay Adapters either.

    Someone please help me with this problem

    DB:3.21:Satellite L50 Nvidia Was Not Detected m3


    Could you give me the laptop's full model and part numbers from the label on the bottom?




    - Peter

  • RELEVANCY SCORE 3.20

    DB:3.20:[Solved] Upgrade Of New Kernel Broke My Nvidia 3p



    OK, long time running arch, but with a new laptop. Which means Im running nvidia-beta to get the new nvidia card running. However, yesterday, there was a kernel upgrade. The wiki refers to a recompile. Ive reinstalled both nvidia-beta-utils and nvidia-beta, but still not working. I tried to modprobe nvidia but nothing is reported (even after reboot). Any tips?

    Last edited by kabads (2015-01-16 21:47:15)

    DB:3.20:[Solved] Upgrade Of New Kernel Broke My Nvidia 3p


    OK, so redownloading the new packages from aur and installing those worked (I could see the nvidia part compiling, which it didnt do before). Thanks for all the support here. Ive marked this one as solved. Now, I just need to look at automating this (if possible) with a hook. Perhaps tomorrow - its late here.

  • RELEVANCY SCORE 3.20

    DB:3.20:[Solved] Cant Launch X Server With Nvidia Card kj



    I am having difficulties setting up X on my computer. Hardware is Nvidia Geforce 970 GTX. I keep getting the error:
    modprobe: ERROR: could not insert nvidia: No such device
    (EE) Fatal server error: no screens found

    DB:3.20:[Solved] Cant Launch X Server With Nvidia Card kj


    I was able to get everything up and running by removing acpi=off from the kernel parameters. I initially added it there because udev hung at boot, but that appears to be resolved now.

    Last edited by Nepherte (2014-12-30 10:04:22)

  • RELEVANCY SCORE 3.20

    DB:3.20:(Solved) Nvidia Gt 650m Driver 331.38 Problem With Bumblebee mc



    Hello people. Since i updated my system to nvidia 338.38-3 via pacman the bumblebee service stopped working and now i have the following error when i started something with primusrun or optirun:


    [ 2070.640091] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

    [ 2070.640141] [ERROR]Aborting because fallback start is disabled.

    DB:3.20:(Solved) Nvidia Gt 650m Driver 331.38 Problem With Bumblebee mc


    Ok i finally solved it. The thing i needed to do was put this line
    rcutree.rcu_idle_gp_delay=1

  • RELEVANCY SCORE 3.18

    DB:3.18:Problems With Flash 10.1 And 1080p Videos cm



    Hi. Since flash 10.1 was released, I noticed great slowdowns when playing 1080p videos, although I have a nvidia GT 240 graphics card which is supposed to be compatible with hardware aceleration. I solved this problem disabling hardware aceleration, but now it uses much more CPU. Any help?

    Windows 7 32bit + chrome 8.0.552.237 32 bit + flash player 10,2,152,14 (also on flash player 10.1)

    Thx

    DB:3.18:Problems With Flash 10.1 And 1080p Videos cm


    Hi, Thank you, but I wanted you to give me the info on my Post#3.

    Thanks,

    eidnolb

  • RELEVANCY SCORE 3.18

    DB:3.18:Bumblebee : Problem With Nvidia Card cz



    Hello,I have got a new laptop with optimus (with a nvidia 650m card). I can start X on intel card without problem.But when I want to switch to nvidia card, i get :
    [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0.

    DB:3.18:Bumblebee : Problem With Nvidia Card cz


    @john https://wiki.archlinux.org/index.php/Bumblebeefor Ubuntu just install bumblebee from the PPA https://launchpad.net/~bumblebee/+archive/stable

  • RELEVANCY SCORE 3.18

    DB:3.18:Make Nvidia Main Card How To Contact Lenovo Support ca


    hey,
    I have y50-70 nvidia 860m (4 gb) laptop. how do I use nvidia 3d with it. I have monitor and everything, Ive talked to nvidia and they are insisting the problem caused by lenovo... is there anyway to contact official lenovo support (mail/chat, not phone) ?
    things that I tried and didnt work:
    1. clean/reinstall/upgrade drivers
    2. ask nvidia for help
    3. check nvidia control panel ( I dont have any options in there because according to nvidia, intel is prime gpu and took the options out)

    well thanks for editing this post over three times now by mods, still not a single comment,

    Admin Edit; post again edited to conform with the forum rules (4th time in total pls see below)







    Solved!
    Go to Solution.

    DB:3.18:Make Nvidia Main Card How To Contact Lenovo Support ca

    Perhaps this link will answer your question:

    http://forums.lenovo.com/t5/Welcome-FAQs/Lenovo-Community-Participation-Rules/m-p/1

    "These communities have been created to provide a high quality atmosphere in which users of Lenovo products and services may share experiences and expertise. While members from Lenovo may participate at intervals to engage in the discussions and offer advice and suggestions, this forum is not designed as a dedicated and staffed support channel. This is an informal and public forum, and Lenovo does not guarantee the accuracy of information and advice posted here..."

    If you want to contact Lenovo Support in Thailand, call:

    Thai, English 001-800-4418-711 (Toll Free) (+662) 787-3066 (Standard Charges Apply)

    Cheers,

    DragonRider




    I'm DO'ing ITLenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )YOGA Tablet 2 Pro-1380FT420

  • RELEVANCY SCORE 3.18

    DB:3.18:[Solved] Nvidia-Ck-Corex: Requires Nvidia-Utils=290.10 fk



    Hi all,

    Ive been using arch time and I am very happy with it, but today when updating the system had a problem Im not sure you know how to solve.I have a problem with the nvidia-kernel and nvidia corex ck-utils, this is what appears on the terminal
    Error: failed to prepare transaction (could not Satisfy dependencies)
    Starting full system upgrade :: ...
    :: Nvidia-ck-corex: requires nvidia-utils = 290.10

  • RELEVANCY SCORE 3.18

    DB:3.18:Y470 Disabled Nvidia Graphic 7z


    Hi all,I need help on this. I disabled my nvidia graphic card to troubleshoot any issue with my card when using optimus to switch between hd3000 and the card.I went all the way and reformated my laptop, and after a fresh install, now it can't detect my nvidia graphic card.Installing either version of nvidia driver from Lenovo website or nvidia didn't work. It says can't find compatible hardware.Is there a way for me to re-enable my nvidia graphic?For sake I have been trying to get it work, even to the extend to dismantle half of my laptop to find a way to "reseat" the graphic card. (and the card seems to be soldierd onboard).Any help would be appriaciated.Thanks,Danny







    Solved!
    Go to Solution.

    DB:3.18:Y470 Disabled Nvidia Graphic 7z

    I guess... my card is fried. Cannot be detected at all. So sad.

  • RELEVANCY SCORE 3.17

    DB:3.17:Graphics Card Not Switching, And Nvidia Settings Make No Difference 83



    Hi all,

    Having a problem with my new Dell machine (Inspiron 17R with Nvidia Geforce GT 650M and Intel HD Graphics 4000).

    When I try to run certain games they are complaining of not having enough VRAM (one game showed a message showing that it could only detect 32MB of VRAM, so the game could not run).

    I only have a basic understanding of the way these video cards work, but as I understand it, the Intel HD Graphics 4000 should be handing over to the Nvidia card when it detects that it is running a program that needs more VRAM - I strongly suspect that it is not doing this, and that is what is causing the problem.

    Also, I read on another forum that someone suffering from a similar problem had solved it by going into the Nvidia Control Panel and adding a program-specific setting for their game, telling it to use the Nvidia card - I tried this, but it appears to have made no difference.

    Does anyone know if I can somehow force the system to use my Nvidia card? Or have I misunderstood what the problem is, and if so can anyone point me in the right direction to fixing the issue?

    Thanks.

    DB:3.17:Graphics Card Not Switching, And Nvidia Settings Make No Difference 83


    I have the same issue with a 3 week on 17R SE I bought for my son. The video performance has dropped and it is sluggish on games. I have updated the BIOS to A14 and the drivers. It is running Win8.0. The WEI for graphics is 5.8. It should be in the area of 7.0. I see lots of complaints on this issue. What is your WEI for this maching?

  • RELEVANCY SCORE 3.17

    DB:3.17:Nvidia Driver For Optimus Capable Cards And Uefi da


    Has anyone have had any luck installing the nvidia (proprietary) driver for laptop with nvidia card like the Y series?I can't boot the laptopafter installing the Nvidia driver. After installing the driver, I get an error saying "device not found" and drops to a shell mode.







    Solved!
    Go to Solution.

    DB:3.17:Nvidia Driver For Optimus Capable Cards And Uefi da

    Yes, I did make this thread, but a month ago. Since then I have it resolved, and I even have it tagged as resolved. Back then, I had a lot of problem making it work. But that was a month ago.And yes, I admit now that there are still issues with the driver. But as I've said at least twice already, the issues exist because native support NVIDIA provides is still relatively new. And yes, people are still experiencing problems because, I'll say it again for the third time, native support is still relatively new and therefore can be buggy.I think it's totally off pace to make factual statements based on one's experience. You're not paying attention to what you're reading and you're very quick to jump to conclusions. NVIDIA most certainly doesn't say that it doesn't support Optimus on linux based OSes. There are minimum required kernel and xrandr versions, and that's pretty much it. They even tell you how to install it on their website:http://us.download.nvidia.com/XFree86/Linux-x86/31​9.12/README/randr14.htmlThere can be/are issues after you install it, and as I mentioned before, I summarized in another thread as to how I got around a lot of the issues I had. Click my username and view it.Finally, every other person and their grandmother is using Ubuntu these days, so there is a lot of support out there for it. I'd imagine that for the latest version of Ubuntu, someone out there has posted a step-by-step guide as to how to install the nvidia driver on an optimus card. The major issue is with older kernels or I'd imagine BSD, etc.

  • RELEVANCY SCORE 3.17

    DB:3.17:Upgrade Nvidia Graphics Card 1x


    Hello, I was just wondering if I could upgrade my lenovo z580 nividia graphics card. I purchased it with this graphics card already installed about a year and a half ago and I am just wondering if I can buy a better graphics card and install it for better performance.







    Solved!
    Go to Solution.

  • RELEVANCY SCORE 3.17

    DB:3.17:[Solved] Need To Keep Installed Old Nvidia Driver 3j



    Hello, since my nvidia gtx660 (gk106, kepler) card doesnt play well with the newest nvidia 313.x drivers i need to be able to keep installed the 310.19 series.To do this im going to add these packages on the pacmans ignore list this way:
    IgnorePkg = nvidia nvidia-utils

  • RELEVANCY SCORE 3.16

    DB:3.16:[Not Solved] Cant Load Nvidia Module At Boot zk



    Hi guys,Ive got some problem with graphic drivers.I own a x53s series Asus laptop, mounting a Nvidia Geforce GT520MX together with an Intel HD Graphics 3000, so I must use Bumblebee drivers to make my Nvidia VGA work.I added the following line in /etc/modules-load.d/nvidia.conf:
    #loads nvidia module at boot
    nvidia

    DB:3.16:[Not Solved] Cant Load Nvidia Module At Boot zk


    Anyway when I try to run

    $ nvidia-settings

    it shows me this advice: You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.

  • RELEVANCY SCORE 3.15

    DB:3.15:[Solved] Resolution Problem mk



    Ok, I finally got Arch Linux working, but my screen resolution is low (I think it is 1024x786, it should be 1280x1024). I have configuret xorg with help from this page: http://wiki.archlinux.org/index.php/How … g_X-Server

    Info:My card is: Nvidia Geforce Fx 5200Installed and working driver: nvidia-96xx

    any more info you need? just ask

    Thanks for the help

    Last edited by gjoellee (2008-12-19 21:34:37)

    DB:3.15:[Solved] Resolution Problem mk


    Strange

    My 19 Samsung had max resolution of 1280x1024 and it seemed to me as normal 4:3 screen. Moreover, I have never seen resolution 1280x960. Also vbetest gives 1280x1024 as valid framebuffer 4:3 resolution... Can it be that the pixels are not square or how can this be explained???

    Sorry Offtopic.

  • RELEVANCY SCORE 3.15

    DB:3.15:Tv Out Problem This Is How I Solved. fd




    Well, first of all I cannot guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
    How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.

    The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20, , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.

    The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT). The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.

    Than It came the must boring part. ;( I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):

    Nvidia 28.32. work with nview.
    nvidia win-xp-2k-2835 work with nview.
    nvidia win-xp-2k-2880 doesnt work with nview.
    nvidia win-xp-2k-2890 doesnt work with nview.
    nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
    nvidia win-xp-2k-2920 doesnt work with nview.
    nvidia win-xp-2k-2942 doesnt work with nview.
    nvidia win-xp-2k-2960 doesnt work with nview.
    nvidia win-xp-2k-2980 doesnt work with nview.
    nvidia Win2k-xp-29.90 doesnt work with nview.
    nvidia W2K_XP_V29.90 doesnt work with nview
    nvidia Win2k-xp-3020 doesnt work with nview
    nvidia Win2k-xp-3030 doesnt work with nview.
    nvidia Win2k-xp-3082 doesnt work with nview.

    I got all this drivers from a really nice site: 3dchipset .
    Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.

    And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once. X(

    That all folks

    DB:3.15:Tv Out Problem This Is How I Solved. fd


    Well, first of all I cannot guarantee if this will work for all people with tv out problems. TV with PC I think will always be a BIG headache .
    How I did fix my TV OUT problem. Since I live here in Brazil, people have a problem with the system that is Pal-m. But this is easy to set up, since you just have the screen working on your TV.

    The first thing that I did is to remove completely the most recent NVDIA drive (not the one made for MSI) that is 30.82. I also removed the WDM driver. Since Im using XP I didnt have to reboot 30 times just 20, , yes 20 reboot times to see if everything was all right, it took me about 1,5 hour of work.

    The second thing was that I started to install the driver that came with my MSI Card (Geforce4 MX-460 TV OUT). The version was 27.50. The TV out problem was gone. I got a really nice image from the screen.

    Than It came the must boring part. ;( I tested all nvidia drives from 27.50 to 30.82. Look the results I got concerning just the nview situation(dual monitors):

    Nvidia 28.32. work with nview.
    nvidia win-xp-2k-2835 work with nview.
    nvidia win-xp-2k-2880 doesnt work with nview.
    nvidia win-xp-2k-2890 doesnt work with nview.
    nvidia win-xp-2k-2911 doesnt work with nview. Not all parts from the driver was updated, someone belongs to 28.90.
    nvidia win-xp-2k-2920 doesnt work with nview.
    nvidia win-xp-2k-2942 doesnt work with nview.
    nvidia win-xp-2k-2960 doesnt work with nview.
    nvidia win-xp-2k-2980 doesnt work with nview.
    nvidia Win2k-xp-29.90 doesnt work with nview.
    nvidia W2K_XP_V29.90 doesnt work with nview
    nvidia Win2k-xp-3020 doesnt work with nview
    nvidia Win2k-xp-3030 doesnt work with nview.
    nvidia Win2k-xp-3082 doesnt work with nview.

    I got all this drivers from a really nice site: 3dchipset .
    Of course most of these are beta drivers and due to my limitation knowledge, I dont know why the nview display stopped to work at version 28.32.

    And the last. The driver 28.90 driver did a really fatal crash on my PC when I was using my web camera and the nview together. It just shut down my PC, at once. X(

    That all folks

  • RELEVANCY SCORE 3.15

    DB:3.15:Lenovo Z510 And Nvidia Gt740m Error-Icon jf


    Hi, i have buy a Lenovo ideapad Z510 with i74702MQ and Nvidia 740M 2Gb.At my first run i see that nvidia geforce experience icon was not present into fast-execute program bar (around the clock).I see only intel integrated graphic-card icon. Into another notebook with same I7 4600 integrated and nvidia GT740M was present every 2.Moreover the link of nvidia geforce experience on the desktop open the nvidia geforce experience 1.6 window, but show an error. Open the nvidia control panel from the windows 8.1 control panel show the correct window nvidia control panel.A new installation of windows 8.1 with the restoration system of notebook give same result.My vendor with assistance resolved the problem with a unistallation of nvidia geforce experience 1,6 and installation of nvidia geforce experience 2.0, downloaded from nvidia website.When he give back to me the notebook, i try a new installation of Windows 8.1 and strangely without change nvidia geforce experience 1.6 to 2.0, i never have the problem to launch geforce experience software.For this I doubt that my vendor has changed something hardwarewithout telling me.I have install nvidia geforce 2.0 software give to me by my vendor, downloaded from nvidia website.After the installation Nvidia GeForce icon was present on fast-execute software beside clock with the integrated graphical card of intel 4600.But when i restart the notebook she disappear.I think that probably was not a hardware problem (benchmark work, now i try a free game to see nvidia GT740M in action) but a compatibility problem. Surely not a compatibility problem with Windows 8.1, because into my another notebook GT740M have no problem with W8.1.I dont know if it is a compatibility problem with energy manager.Can you help me?







    Solved!
    Go to Solution.

    DB:3.15:Lenovo Z510 And Nvidia Gt740m Error-Icon jf

    Ok, after 2 month without help i find that every problem on my Ideapad Z510 was created by Lenovo Power manager software (SBIE2101 error on sandboxie, problem with directx's dll not found when i play some videogame, problem with random blue-crash after hybernation, etc...)Unistalled this software every work good.Where i can ask a new version of Lenovo Power manager that dont create problem with Nvidia 740 M and Windows 8.1 ?

  • RELEVANCY SCORE 3.14

    DB:3.14:[Solved] Nvidia* Gets To Cinnamon Fallback Mode At Best. f1



    [SOLVED] Wiki recommends nvidia or nvidia-lts (currently 343.x) for my card, while Nvidia says 340.x. Installing nvidia-340xx-lts didnt solve the problem. After looking at my pacman logs, I saw an install of opencl-nvidia along with the stretch of time that I had nvidia working. I installed opencl-nvidia340xx and now it is running again.

    Hi All,First post here; Ive been running arch since Aug, as my main OS since early September. Im having issues with the nvidia driver and nvidia-lts drivers. (Ive basically rewritten this entire post to make it more clear and to the point.)

    Google results suggest installing bumblebee; Im running an AMD X2 and a nvidia GT 610 desktop so my understanding is that it isnt relevant.

    3.14 kernal + nvidia = driver doesnt load, modprobe cant find it. 3.14 kernal + nvidia-lts = driver loads, cinnamon only reaches fallback mode. Gnome-classic wont load at all. 3.14 kernal + nvidia-340xx-lts = driver loads, cinnamon only reaches fallback mode. Gnome-classic untested. 3.14 kernal + nvidia-340xx = driver doesnt load, modprobe cant find it. 3.16 kernal + nvidia-lts = driver doesnt load, modprobe cant find it.

    I think this may be related to having moved /boot around; I had other problems that I resolved by moving it back (I thought sucessfully, but maybe not. I have had nvidia drivers working off and on; Id like to figure out what is breaking them, though.

    Ive run this:
    # mkinitcpio -p linux
    # mkinitcpio -p linux-lts
    # nvidia-xconfig

    DB:3.14:[Solved] Nvidia* Gets To Cinnamon Fallback Mode At Best. f1


    [SOLVED] Wiki recommends nvidia or nvidia-lts (currently 343.x) for my card, while Nvidia says 340.x. Installing nvidia-340xx-lts didnt solve the problem. After looking at my pacman logs, I saw an install of opencl-nvidia along with the stretch of time that I had nvidia working. I installed opencl-nvidia340xx and now it is running again.

    Hi All,First post here; Ive been running arch since Aug, as my main OS since early September. Im having issues with the nvidia driver and nvidia-lts drivers. (Ive basically rewritten this entire post to make it more clear and to the point.)

    Google results suggest installing bumblebee; Im running an AMD X2 and a nvidia GT 610 desktop so my understanding is that it isnt relevant.

    3.14 kernal + nvidia = driver doesnt load, modprobe cant find it. 3.14 kernal + nvidia-lts = driver loads, cinnamon only reaches fallback mode. Gnome-classic wont load at all. 3.14 kernal + nvidia-340xx-lts = driver loads, cinnamon only reaches fallback mode. Gnome-classic untested. 3.14 kernal + nvidia-340xx = driver doesnt load, modprobe cant find it. 3.16 kernal + nvidia-lts = driver doesnt load, modprobe cant find it.

    I think this may be related to having moved /boot around; I had other problems that I resolved by moving it back (I thought sucessfully, but maybe not. I have had nvidia drivers working off and on; Id like to figure out what is breaking them, though.

    Ive run this:
    # mkinitcpio -p linux
    # mkinitcpio -p linux-lts
    # nvidia-xconfig

  • RELEVANCY SCORE 3.14

    DB:3.14:Problem With Auto Loading Modules And Nvidia px



    Well I have old Nvidia card that seems to be giving me problems. The card is
    01:07.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

    DB:3.14:Problem With Auto Loading Modules And Nvidia px


    Ok fixed it FINALLY. Many many many many thanks go to stonecrest from #archlinux for the solution.he said to do
    hwdetect --show-modules

  • RELEVANCY SCORE 3.14

    DB:3.14:[Solved] Nvidia-340xx-Lts Fails After Upgrade To Linux-Lts 3.14.36-1 f9



    update2:Problem solved in: nvidia-340xx-lts 340.76-5 with linux-lts 3.14.36-1

    update:The question has been answered and the bug was reported.

    My question is: Where should I report it? Respective Arch Package Maintainer or Upstream?

    I am in doubt of where to report because of the different version numbers in the various nvidia packages after doing a full system upgrade with pacman.
    problem:
    --------
    lxdm with nvidia=340xx-lts fails to start after upgrade to linux-lts 3.14.36-1
    (downgrading to linux-lts 3.14.35-1 solves the problem)
    architecture: x86_64

    boot error messages:
    --------------------
    systemd[1]: Started LXDE Display Manager.
    kernel: nvidia: disagrees about version of symbol proc_mkdir_mode
    kernel: nvidia: Unknown symbol proc_mkdir_mode (err -22)
    kernel: nvidia: disagrees about version of symbol proc_create_data
    kernel: nvidia: Unknown symbol proc_create_data (err -22)
    kernel: nvidia: disagrees about version of symbol PDE_DATA
    kernel: nvidia: Unknown symbol PDE_DATA (err -22)
    kernel: nvidia: disagrees about version of symbol proc_remove
    kernel: nvidia: Unknown symbol proc_remove (err -22)
    kernel: nvidia: disagrees about version of symbol proc_mkdir_mode
    kernel: nvidia: Unknown symbol proc_mkdir_mode (err -22)
    kernel: nvidia: disagrees about version of symbol proc_create_data
    kernel: nvidia: Unknown symbol proc_create_data (err -22)
    kernel: nvidia: disagrees about version of symbol PDE_DATA
    kernel: nvidia: Unknown symbol PDE_DATA (err -22)
    kernel: nvidia: disagrees about version of symbol proc_remove
    kernel: nvidia: Unknown symbol proc_remove (err -22)
    systemd[1]: lxdm.service: main process exited, code=exited, status=1/FAILURE
    systemd[1]: Unit lxdm.service entered failed state.
    systemd[1]: lxdm.service failed.

    Arch-Linux package versions:
    ----------------------------
    linux-lts 3.14.36-1
    nvidia-340xx-lts 340.76-4 --ends with -4 instead of -2 as the other two nvidia packages(is this relevant?)
    nvidia-340xx-libgl 340.76-2
    nvidia-340xx-utils 340.76-2
    lxdm 0.5.0-4

    lib32-nvidia-340xx-libgl 340.76-1
    lib32-nvidia-340xx-utils 340.76-1
    lib32-opencl-nvidia-340xx 340.76-1

    DB:3.14:[Solved] Nvidia-340xx-Lts Fails After Upgrade To Linux-Lts 3.14.36-1 f9


    Problem solved in: nvidia-340xx-lts 340.76-5 with linux-lts 3.14.36-1

    Thread can be closed now. Thanks again everyone.

  • RELEVANCY SCORE 3.13

    DB:3.13:Nvidia 8600gt Dont Work With Nvidia Drivers 100.14.11 [Solved] ca



    Hi.

    I have problem with my new graphic card MicroStar NX8600GT-T2D256EZ 256MB, PCI-E. It dont work with NVIDIA binary drivers. Old version 1.0.9755 does not support 8600GT yet (7300LE works great), so i wait for new drivers. But after upgrade to nvidia 100.14.11-1 is everything the same, but i dont know why

    ...please, can anybody help me?

    Thanks in advance

    http://www.instalater-topenar.com/tmp/lsmod.txthttp://www.instalater-topenar.com/tmp/Xorg.0.loghttp://www.instalater-topenar.com/tmp/xorg.conf

    Last edited by w0c45_x86 (2007-06-26 10:43:43)

    DB:3.13:Nvidia 8600gt Dont Work With Nvidia Drivers 100.14.11 [Solved] ca


    Yes.. it was because of outdated nvidia-utils package... i dont mind, that nvidia-utils does not upgrade ..now is everything ok

  • RELEVANCY SCORE 3.13

    DB:3.13:T410. Possible To Upgrade The Graphics Card (Nvidia 3100m)?? c7


    Have a T410 (2522) with a Nvidia graphics card. I would like to buy another better card as I do some CAD work on my laptop. I have not found a clear answer to this, some information says that the Nvidia 3100m is switchable, other information says that T410 has an inboard graphics cards.Does someone has a clear answer to this?







    Solved!
    Go to Solution.

    DB:3.13:T410. Possible To Upgrade The Graphics Card (Nvidia 3100m)?? c7

    some of the T410 with Nvidia GPU isn't switchable. But upgrading the GPU isn't possible as the discrete gpu are soldered onto the motherboard.



    Regards,Jin LiMay this year, be the year of 'DO'!I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • RELEVANCY SCORE 3.13

    DB:3.13:Video Card Automatically Sets Fan Speed To 0% Upon Awakening From Sleep Mode fc


    Graphics card: Nvidia GeForce 9800 GTX+ MoBo: Gigabyte EP45-UD3R Software: Nvidia System Tools with ESA Support Attempts to solve the problem using the Profile Policies feature of the Nvidia Sys Tools software have failed. I have sent feedback to Nvidia about the problem. Any idea why this is happening and what possible solutions there may be?

    DB:3.13:Video Card Automatically Sets Fan Speed To 0% Upon Awakening From Sleep Mode fc

    I also have the same Mobo (EP45-UD3R) and have been running windows 7 since the RTM release.   I have an nvidia GTX 260 and have this EXACT same issue.  The video card fan is actually running at 100% but reports 0% to the computer.  Very annoying.  This basically disables sleeping for me since I end up restarting when it happens since the video card fan is so damn loud at 100%.

  • RELEVANCY SCORE 3.13

    DB:3.13:New Video Card Problems [Solved] 7z



    i had to swap the video card in my home theater pc. the card i had was an nvidia 7900gt. the card im putting in is an ati x300se. i removed all the nvidia stuff and when i try and install the xf86-video-ati driver it says it conflicts with xorg-server.

    any idea what the problem might be?

    EDIT: there was an xorg update i hadnt done yet. updated and it went in with no problems.

    Last edited by thelastknowngod (2009-11-10 23:59:39)

    DB:3.13:New Video Card Problems [Solved] 7z


    i had to swap the video card in my home theater pc. the card i had was an nvidia 7900gt. the card im putting in is an ati x300se. i removed all the nvidia stuff and when i try and install the xf86-video-ati driver it says it conflicts with xorg-server.

    any idea what the problem might be?

    EDIT: there was an xorg update i hadnt done yet. updated and it went in with no problems.

    Last edited by thelastknowngod (2009-11-10 23:59:39)

  • RELEVANCY SCORE 3.12

    DB:3.12:[Solved] Hdmi Audio Broken After Upgrading To Kernel 3.13.4 1s



    Hi,

    Yesterday I upgraded to kernel 3.13.4 from 3.12.9 andHDMI audio through my nVidia GTX660 card stopped working.The problem occurs both with nouveau and nVidia drivers.My system is an aged Intel quadcore Q9400 on a Intel motherboard.By typing aplay -l I get:
    card 0: Intel [HDA Intel], device 0: 92HD73E1X5 Analog [92HD73E1X5 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: 92HD73E1X5 Digital [92HD73E1X5 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    DB:3.12:[Solved] Hdmi Audio Broken After Upgrading To Kernel 3.13.4 1s


    Thank you very much, silenceleaf.

    I managed to make it work with some tweaking like you said.But only after a deep power cycle, unpluging any power to the system.Just turning off the machines power button was not enough. Odd!

    Last edited by tenoriocalc (2014-02-23 16:09:44)

  • RELEVANCY SCORE 3.12

    DB:3.12:Y480 Problem With Nvidia m3


    This problem always occurs after i open my computer for a few hours.Any idea how to fix it?nvidia driver version is 304.79. window7 64bit.







    Solved!
    Go to Solution.

    DB:3.12:Y480 Problem With Nvidia m3

    jonathan,try uninstalling the driver, reboot then install it again? If problem persist, try doing a one key recovery to factory default. If problem persist after that then contact support to get the hardware checked.



    *Non Lenovo employee*I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

  • RELEVANCY SCORE 3.12

    DB:3.12:[Solved (Ish)] Startx Broken After Nvidia 346.35.3 cx



    SOLVED: I still dont know what the official problem is, but switching to the opensource / nouveau drivers worked for me. I need a working PC, so I dont have any more time to put into messing with the regular nvidia for now.

    The following is my cat /var/log/Xorg.0.log.old | grep NVIDIA output after I try to startx.

    What I am left with is my monitor that is put to sleep and unrecoverable.

    I had a working machine before the switch from Nvidia 343 to the 346.35-2. However, I added fiscos 10-nvidia.conf file fix and was able to successfully boot once (which lasted the 24 hours before returning to school).

    After powering up at school I had a monitor resolution issue, and checked for updates. I saw the Nvidia update, so I removed the 10-nvidia.conf file/fix by fisco, took the update, and then rebooted. I havent had a working GUI since.

    I have tried reinstalling all nvidia drivers after removing nvidia* packages from cache, and then reinstalling the packages fresh.

    I am currently at a loss as to what to do and am open to any/all suggestions.

    My card is a GeForce GT 640.

    UPDATE: there are no errors anywhere in all of the Xorg.0.log and in dmesg, and I am unable to view any modes in xrandr to try and change from the NULL mode to something else.

    UPDATE2: I found the errors where it failed to assign any displays to the monitor, and I updated the log file to the one where this occured.

    It seems like something is triggering the monitor to go to sleep.
    [ 6109.545] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
    [ 6109.545] (EE) NVIDIA(0): Set AllowEmptyInitialConfiguration if you want the server
    [ 6109.545] (EE) NVIDIA(0): to start anyway
    [ 6109.751] (EE) NVIDIA(0): Failing initialization of X screen 0

    DB:3.12:[Solved (Ish)] Startx Broken After Nvidia 346.35.3 cx


    SOLVED: I still dont know what the official problem is, but switching to the opensource / nouveau drivers worked for me. I need a working PC, so I dont have any more time to put into messing with the regular nvidia for now.

    The following is my cat /var/log/Xorg.0.log.old | grep NVIDIA output after I try to startx.

    What I am left with is my monitor that is put to sleep and unrecoverable.

    I had a working machine before the switch from Nvidia 343 to the 346.35-2. However, I added fiscos 10-nvidia.conf file fix and was able to successfully boot once (which lasted the 24 hours before returning to school).

    After powering up at school I had a monitor resolution issue, and checked for updates. I saw the Nvidia update, so I removed the 10-nvidia.conf file/fix by fisco, took the update, and then rebooted. I havent had a working GUI since.

    I have tried reinstalling all nvidia drivers after removing nvidia* packages from cache, and then reinstalling the packages fresh.

    I am currently at a loss as to what to do and am open to any/all suggestions.

    My card is a GeForce GT 640.

    UPDATE: there are no errors anywhere in all of the Xorg.0.log and in dmesg, and I am unable to view any modes in xrandr to try and change from the NULL mode to something else.

    UPDATE2: I found the errors where it failed to assign any displays to the monitor, and I updated the log file to the one where this occured.

    It seems like something is triggering the monitor to go to sleep.
    [ 6109.545] (EE) NVIDIA(0): Failed to assign any connected display devices to X screen 0.
    [ 6109.545] (EE) NVIDIA(0): Set AllowEmptyInitialConfiguration if you want the server
    [ 6109.545] (EE) NVIDIA(0): to start anyway
    [ 6109.751] (EE) NVIDIA(0): Failing initialization of X screen 0

  • RELEVANCY SCORE 3.11

    DB:3.11:Nvidia 8600m Gt Grafic Card Issue aj


    I had a problem with preinstalled driver that came with Win8 for Geforce 8600M GT card.
    I tried almost ten different versions and then I rolled back to NVIDIA 179.48 that was for Vista.
    That solved flickering screen issue with my card.

    DB:3.11:Nvidia 8600m Gt Grafic Card Issue aj

    I finally fix the problem by installing the acer aspire 5920G Windows Vista 32bit VGA drivers from the acer website.

  • RELEVANCY SCORE 3.11

    DB:3.11:Problem With Nvidia Geforce 8600m Gt On Dell Inspiron 1720! 1z


    Hey people here!
    I am having problems with my NVidia GeForce 8600M GT graphics card on my Dell Inspiron 1720! It always crashes and the screen becomes blank for 5-30 seconds! I don't know what is happening... But, I tried reinstalling the driver... But, it still doesn't work! I have solved other problems but this one is the main concern and still exsists! OMG! I need help! :|!

    DB:3.11:Problem With Nvidia Geforce 8600m Gt On Dell Inspiron 1720! 1z


    G'Day ,

    I had all the problems listed in your post and from post in other forums and not sure why Dell hasn't offered this advice as a starting point.

     

    I found that by entering bios setup (F2) scrolling down to ONBOARD DEVICES and then to SATA OPERATION select ATA  and after restarting all graphics card issues were resolved on my notebook which is the same model as yours.

     

    Also I recommend the latest DELL NVIDIA graphics card driver (JULY 12 2008) 175. 97

     

    I hope this helps anyone that might be going through the same headaches and hassles that I went through.

     

    Cheers

  • RELEVANCY SCORE 3.11

    DB:3.11:Nvidia Tesla C2075 Disappeared After Nvidia Driver Update s1



    Hi,

    I have 2 NVIDIA cards, the primary is NVIDIA GTS 450 and the secondary is Tesla C2075.

    After upgradinglinux 3.6.9 = linux 3.7.9-2nvidia 310 = nvidia 313.18-3nvidia-utils 310 = nvidia-utils 313.18-1opencl-nvidia 310 = opencl-nvidia 313.18-1

    The cudaGetDeviceCount function in CUDA didnt recognize Tesla C2075,and cudaGetDeviceProperties couldnt find it as well.

    Strangely enough, Tesla C2075 still shows up in nvidia-smi and nvidia-settings,and some programs using opencl-nvidia interface could recognize Tesla C2075 as well,the problem is only with CUDA programs....

    I tried reinstalling cuda5 and recompiling the binaries, switching the Tesla C2075 to the primary video card,but they didnt make any difference.

    Any idea on how this could happen?Now I just down-graded nvidia driver and Tesla C2075 shows up in CUDA programs again....

    Thanks.

    Last edited by liuexp (2013-02-27 13:06:34)

    DB:3.11:Nvidia Tesla C2075 Disappeared After Nvidia Driver Update s1


    [update]Strange enough, the issue just disappeared with the latest update,i.e. linux-3.8.4-1 nvidia-313.26-1

  • RELEVANCY SCORE 3.11

    DB:3.11:Nvidia 8800gt Vertical Lines With Pixels Problem. - Best Buy: Unboxed 9a



    Hi to all of you, I have been using my 8800gt for almost two years. It suddenly got "corrupted".

    It doesn't load any nvidia driver, it installs it, but doesn't run it because it says: "The device has a problem". The display has always four vertical lines across the screen. Each one of those four has pixels stock. They look really weird. Is this fixable. I mean has anyone has ever had this problem before? Im currently using the card, the lines are still there, and I can't run any 3d software 'cause the card won't load its drivers. And if it does, after rebooting it doesn't anymore.







    Solved!
    Go to Solution.

    DB:3.11:Nvidia 8800gt Vertical Lines With Pixels Problem. - Best Buy: Unboxed 9a


    Also keep in mind when you contact the company you will most likely need to send them the card so they can test it out. Then they will make a determination on why it failed and if they will replace it or what actions they will take. I am pretty certain this will not be something that will happen in a few days. I have heard some real nightmare stories about video card returns.

    However I returned a hard drive once to seagate and the whole thing took less than a week. I was pleasantly surprised, maybe you will have that kind of luck with your card.

    Good luck.

    Paul

  • RELEVANCY SCORE 3.11

    DB:3.11:[Solved] Problem With Dual Nvidia/Intel And Xorg (W/ Bumblebee) pk



    Hi there!I just bought a new laptop, and I having a couple of problem trying to run xorg on it.It has those fantastic nvidia optimus card. I have tried with bot just nvidia driver and bumblebee, but my xorg still refusing to start.I attach here my Xorg.0.log, nvidia intel installed packages and dmesg.
    local/bumblebee 3.1-5
    NVIDIA Optimus support for Linux through VirtualGL
    local/libvdpau 0.6-1
    Nvidia VDPAU library
    local/nvidia 313.30-2
    NVIDIA drivers for linux
    local/nvidia-utils 313.30-2
    NVIDIA drivers utilities
    local/intel-dri 9.1.1-1
    Mesa drivers for Intel
    local/bbswitch 0.6-2
    Kernel module allowing to switch dedicated graphics card on Optimus laptops

    DB:3.11:[Solved] Problem With Dual Nvidia/Intel And Xorg (W/ Bumblebee) pk


    Ok guys, I fixed it.Looking at https://wiki.archlinux.org/index.php/NV … IA_Optimus, I found that I had no intel driver installed.The solution was as stupid as installing xf86-intel-driver, blacklisting nvidia, and everything works now flawlessly, even optirun ^^Ah, forgot it, deleted /etc/X11/xorg.conf, and regererated it with X -configure.
    [roobre@Archpv3 ~]$ glxspheres
    Polygons in scene: 62464
    Visual ID of window: 0x21
    Context is Direct
    OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile
    59.074222 frames/sec - 50.617156 Mpixels/sec

  • RELEVANCY SCORE 3.11

    DB:3.11:T430 Low Cpu Clock When Using Nvidia Card kz


    When I'm using any aplication with Nvidia card (Photoshop, 3D Max, etc.) or switching to external monitor (Display Port) my CPU sets down to minimal values: 1.15Ghz.Why???What can I do? How to fix this?Please help. This issue very important for me, because working on such speed is impossible [ T430, Core i5-3210M, Nvidia NVS5400, Windows 8 x64 PRO ]







    Solved!
    Go to Solution.

    DB:3.11:T430 Low Cpu Clock When Using Nvidia Card kz

    Great! I'm glad I could help.



    ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • RELEVANCY SCORE 3.10

    DB:3.10:Upgrade Graphic Card k8



    I have Model P105-S6217 with graphic card NVIDIA 7300, 128 MB, Is it possible to upgrade this card to NVIDIA 7900, 256MB (or any other).

    Thanks

    HG







    Solved!
    Go to Solution.

    DB:3.10:Upgrade Graphic Card k8

    Sorry to bear bad news. In general, notebook computers aren't great gaming platforms. Game designers tend to continually push the envelope in using the latest graphics card capabilties and notebook manufacturers just don't have to resources to keep up with the constant updates required to device drivers and hardware. There are a very few notebooks designed as gaming machines (Voodoo PC, Alienware, etc.) but even those have limitations. They also are at the very high end of the cost scale running upwards from $5K or so for those that are really game capable.

  • RELEVANCY SCORE 3.10

    DB:3.10:Nvidia Geforce 9100 Card 9f



    I have a pavilion p6320f with a nvidia geforce 9100 grafics card and the monitor has about a 1" space at the bottom that is blank. It want move all the way to the bottom. Is this a common problem with this card or is it just a bad card?

    New desk top and monitor.

    Thanks ron

    DB:3.10:Nvidia Geforce 9100 Card 9f


    I have a pavilion p6320f with a nvidia geforce 9100 grafics card and the monitor has about a 1" space at the bottom that is blank. It want move all the way to the bottom. Is this a common problem with this card or is it just a bad card?

    New desk top and monitor.

    Thanks ron

  • RELEVANCY SCORE 3.10

    DB:3.10:[Solved] Nvidia Geforce 6150 Lockup k8



    I have happily running a system with this video card for some time. However, the latest nVidia drivers no longer support it and I pinned the driver, nut its now longer possible to upgrade other packages as Arch cant install several packages without updating the NVidia driver. So I did a clean install with the Nouveau driver. I get login screen with either KDE or Slim with no problem. However, as soon as I login the system completely freezes either instantly(KDE), or after a few minutes (Xfce). I have used Nouveau drivers with this card in the past without problem.

    Googling reveals people have had problems in the past, but nothing recent. Is it new video card time, or can anyone suggest how to get Nouveau to work.

    Last edited by geekinthesticks (2013-03-15 08:36:53)

    DB:3.10:[Solved] Nvidia Geforce 6150 Lockup k8


    Thank you, that worked. I hadnt realized there were packages for the legacy drivers.

  • RELEVANCY SCORE 3.09

    DB:3.09:[Solved]Lspci Command Is Wrong 8m



    When I run the lspci command it gets my graphics card wrong. I have a NVIDIA GeForce 8200M G, but lspci gives me this in the vga line:02:00.0 VGA compatible controller: nVidia Corporation C79 [GeForce 9200M G] (rev b1)

    Could someone please tell me how to make it give correct information? I can deal with it since I already know what my card is, but I am afraid it might be part of a larger problem.

    Last edited by Tux the penguin (2010-09-16 21:47:56)

    DB:3.09:[Solved]Lspci Command Is Wrong 8m


    You can also see below where 086f translates to a 8200M:

    http://us.download.nvidia.com/XFree86/L … chips.html

  • RELEVANCY SCORE 3.09

    DB:3.09:Nvidia Module With Kernel26-Ck xx



    If you use the arch nvidia package and want to install kernel26-ck alongside your stock kernel, you might run into a conflict. The nvidia module built for my stock arch kernel wouldnt load with kernel26-ck.

    The problem was solved by removing nvidia and installing nvidia-all from the AUR, which builds nvidia modules for all kernels detected on your system. It worked well.

    DB:3.09:Nvidia Module With Kernel26-Ck xx


    Ooh, the nvidia-all PKGBUILD is pretty neat. I hadnt thought of doing something like this.

  • RELEVANCY SCORE 3.08

    DB:3.08:Nw9440 Problem With Nvidia Quadro Fx 1500m Drivers 83



    Hello,

    i'm looking for new drivers for my graphic card Nvidia Quadro FX 1500M but don't find anyone. The drivers on the hp website are old and not compatible with new games and there are no drivers for this card on the nvidia website. Is this card abandonned by hp and nvidia that i can't find anything working?

    DB:3.08:Nw9440 Problem With Nvidia Quadro Fx 1500m Drivers 83


    Ok, thanks, but i was there already and it's an old post. I finally force install 296.70 driver of 1500 but i don't really notice difference (other than not having nvidia control panel). Sad that the products aren't supported

  • RELEVANCY SCORE 3.08

    DB:3.08:[Solved]Problems With Nvidia/Intel Integrated Graphics m8



    I just bought a Lenovo E540 with integrated Intel and Nvidia GT740M graphics cards. In the last 10 hours, Ive tried to work with nouveau and bumblebee, but it didnt work out. I then disabled the Nvidia card from BIOS, removed and blacklisted nvidia and nouveau. I now have a functioning laptop and do not seem to have any error messages in my logs.

    However rendering graphics with my Intel card seems to pose a problem. glxgears does not show anything, just a black screeen and gives the following output:
    aydin :: ~ » glxgears -info
    Running synchronized to the vertical refresh. The framerate should be
    approximately the same as the monitor refresh rate.
    GL_RENDERER =
    GL_VERSION =
    GL_VENDOR =
    GL_EXTENSIONS =

    DB:3.08:[Solved]Problems With Nvidia/Intel Integrated Graphics m8


    Yep, that was the problem. I removed all the libGL files, and aforementioned nvidia ones by hand.I then reinstalled all intel packages, and mesa-libgl from the repositories. Problem solved.

    One word of advice for hybrid graphics users: (specifically nvidia owners)

    If you install using the proprietary installer, or install the nvidia packages from the repos, be VERY careful with leftover files. I reinstalled mesa-libgl dozen times after I removed nvidia, but I guess pacman does not replace any files on disk if they exist, while reinstalling. If pacman gives you conflicting files, be sure to expect problems,

    Last edited by nrs (2014-03-08 20:10:40)

  • RELEVANCY SCORE 3.08

    DB:3.08:Y470 Nvidia Gt550m 2gb Ddr3 Problem ja


    Hi...I need help to solving my graphic card issue...My lenovo always crash to start application (high end game mostly) using the nvidia graphic card (it need to be restarted to running again...)Anyone have a solution for me???Spec (Y470, i7 2630qm, 4gb ram, Nvidia geforce GT550M 2gb with cuda (switchable graphic card), win 7 home premium)

    DB:3.08:Y470 Nvidia Gt550m 2gb Ddr3 Problem ja

    hi nickname7thif you have minidump file, please, upload it so i can check it.



  • RELEVANCY SCORE 3.08

    DB:3.08:Nvidia Gt 630m 2gb Driver Installation Problem cp


    I have just purchased Lenovo Ideapad Z580 59-356331Intel Core i3 3110M 2,4 Ghz4GB Ram ,NVIDIA GT 630M 2GB but without operating system.A friend of mine installed Windows 7 Ultimate 32bitAll drivers were installled from dvd.Installation was succesfful ,I surfed the net , but we became aware of a huge problem.We realized that we cannot find NVIDIA card or nvidia window anywhere ??After we tried to install NVIDIA graphic driver we got the message."This Graphics Driver Could Not Find Compatible Graphics Hardware".We tried drivers from web and recent advices regarding nvdia problem but got same message.The salesman told us that we should have installed w7 64 bit .He advised us to reinstall windows 7 with 64bit version. and 64bit version should recognize nvidia.What is your opinion and advice please help and share







    Solved!
    Go to Solution.

    DB:3.08:Nvidia Gt 630m 2gb Driver Installation Problem cp

    I have some questions and I hope somebody would answer:1) Why was so important to install w7 64 bit instead of 32 bit version . i.e. what is the realdifference between two versions in this case.2) Does it mean that this nvidia 2gb card would not work on w7 32 bit at all ??( I was wondering what would happen with manual instalation on w7 32 bit version?Would it work or no ??? )3) Now I have together Intel HD graphic and nvidia. How they work together? Do I have to activate some settings or everything is done by intel and nvidia graphic without me ?4) Can somebody more precisely tell what would be the difference in performance with and without nvidia card ( because I do not notice anything special with nvidia activated ) Is it important only for gaming or there are some other benefits with 2gb nvidia card

  • RELEVANCY SCORE 3.08

    DB:3.08:[Solved] Force 60hz Instead 50hz px



    Hello. My English is very poor, warning! :-P

    I have a laptop computer with a Nvidia 9600M GT graphic card , with a resolution native 1680x1050 and 60Hz (VertRefresh). The problem that I have is that although it modifies the values in xorg.conf, I believe that HAL omits them and it puts its refresh for 50Hz. I would like to force my 60Hz native.PD: The driver that I use is nvidia and I configured xorg.conf through nvidia-xconfig.

    I hope if somebody can help me, thank you!

    Last edited by alehox (2009-09-15 16:40:15)

    DB:3.08:[Solved] Force 60hz Instead 50hz px

    toxygen wrote:
    I can verify kde also shows 60hz now on the settings manager. Thanks!

  • RELEVANCY SCORE 3.08

    DB:3.08:Nvidia Windows Updates p9


    Hi, Iinstalled "nVidia - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA NVS 5400M" from Windows update and I think that Optimus stopped working. The graphic card was still running even if there was no program using it. So, I installed the official Nvidia drivers and the problem was still there. The graphic card never turned off. So I tried to install "NVIDIA Optimus Display Driver for Windows 7 (64-bit) - ThinkPad" from Lenovo and it seems that the problem is solved now, but the graphic driver is 296.88 not the newest 305.93 and "nVidia - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA NVS 5400M" is showing again in WIndows update. So, I'd like to ask if somebody is experiencing the same problem and if there is some solution for it. Thanks.PS: My laptop is ThinkPad T530 (2392-3EG).

    DB:3.08:Nvidia Windows Updates p9

    HiI tried installing this update last night: "nVidia - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA Quadro K2000M" on my W530. The installation failed, reporting that the device was not connected. Now the Quadro K2000M appears no longer to work at all. I have tried re-installing the g5de33ww package, but no change - the machine must be started in integrated graphics mode, or fails during boot, "unable to connect to device".I wonder if my K2000M is now broken...W530: 3720QM, K2000M, 32GB DDR3-1600, Samsung SSD 830 256GB, FHD

  • RELEVANCY SCORE 3.07

    DB:3.07:Nvidia Drivers...[Solved] c1



    Hi everybody

    The problem is that my nvidia drivers dont work. I tried (almost) every method on arch wiki to make them work, but they dont. Nouveau driver dont work, closed surce nvidia drivers too. My card - geforce go 7300. What outputs should i show you?

    Last edited by tadasbar (2012-05-13 11:10:04)

    DB:3.07:Nvidia Drivers...[Solved] c1


    Install the bublebee, nvidia-utils-bumblebee, nvidia and final libvdpau. With that no error compilling.

  • RELEVANCY SCORE 3.07

    DB:3.07:Nvidia Problem [Solved] 7s



    Hello,

    On a new install I did these steps to install X and the properaity nvidia drivers.

    pacman -Syupacman -S xorgpacman -S xf86-input-udevpacman -S nvidia nvidia-utils

    nvidia -xonfig --composite

    But now X does not start up with a message that X can not find the nvidia-kernel.

    How to solve this ?

    Roelof

    Last edited by roelof (2010-08-23 17:09:32)

    DB:3.07:Nvidia Problem [Solved] 7s


    Hello Wonder,

    Thank you.That solved my problem

  • RELEVANCY SCORE 3.07

    DB:3.07:Problem With Nvidia-Optimus After Update s8



    I have installed the proprietary nvidia driver on a notebook with a nvidia optimus card. Ive followed the instructions of the /usr/share/doc/nvidia/README, but after an update last week, it has not been working any more.

    The main error seems to be on this part of my xorg.conf
    Section Device
    Identifier nvidia
    Driver nvidia
    BusID PCI:01:00:0
    EndSection

    DB:3.07:Problem With Nvidia-Optimus After Update s8

    rejak wrote:
    I forgot to post the output of dmesg, shame on me!
    [ 613.444524] nvidia 0000:01:00.0: irq 49 for MSI/MSI-X
    [ 618.745185] NVRM: RmInitAdapter failed! (0x25:0x28:1157)
    [ 618.745193] NVRM: rm_init_adapter(0) failed

  • RELEVANCY SCORE 3.07

    DB:3.07:I Want To Upgrade The Graphic Card Of My Sve1513acnb To Nvidia 2gb Graphic Card .Is It Possible px


    I have been getting trouble with playing games on my origimal sony graphic card.so my question is can i uninstall my old graphic card and intall a new one






    Solved!
    Go to Solution.

    DB:3.07:I Want To Upgrade The Graphic Card Of My Sve1513acnb To Nvidia 2gb Graphic Card .Is It Possible px

    Hi there!

    It seems that the Model number that you have provided is not a US Model.

    This Forum is for help and support for US Sony products.

    For best assistance, please contact the Sony Support team in your area!

    Thank you!

    Sorry for any inconvenience!

    http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific



    Sony's #1 Fangirl, Esther Smit

  • RELEVANCY SCORE 3.06

    DB:3.06:Macbook Pro 2010 Nvidia 330m Loss Video mp


    hello and happy new year.....i have a macbook pro 2010 i5 with the graphic card (330m) when open nvidia,macbook pro crash with backlight keyboard on and my question is...if i repair the nvidia 330m with new nvidia chihset the problem can fix it?somebody find solution with theis repair?thanks

    DB:3.06:Macbook Pro 2010 Nvidia 330m Loss Video mp

    hello and happy new year.....i have a macbook pro 2010 i5 with the graphic card (330m) when open nvidia,macbook pro crash with backlight keyboard on and my question is...if i repair the nvidia 330m with new nvidia chihset the problem can fix it?somebody find solution with theis repair?thanks

  • RELEVANCY SCORE 3.06

    DB:3.06:[Solved] Movies On 1080p Screen 3p



    I have a laptop with 1080p screen and Nvidia 460m card. I have install the latest nvidia drivers. When I play movies 720p and 1080p, I get something like lines on the screen when there is too much movement. These lines do not show on my second screen 1650X1050 when I play the movie. I have tried mplayer, smplayer and vlc with gpu. I guess the problem is the screen with resolution 1080p. How can I fix it?

    Last edited by pavkonti (2013-11-07 22:06:16)

    DB:3.06:[Solved] Movies On 1080p Screen 3p


    This sounds like screen tearing. Use a search engine of your choice and search for screen tearing along with whatever video hardware is in play here.

  • RELEVANCY SCORE 3.06

    DB:3.06:[Solved] Random Beeps Through Sound-Card (Pcspkr Is Not Loaded) aa



    Hi everybody,

    Im having a problem with random beeps. They happen without any logical reason (at least for me), usually five or seven in a row every two hours (though it doesnt seem periodic in time). They are routed through headphones, hence I think they are not produced by the laptop speakers, instead they come from the sound card. Some info on my system:

    Installed recently (one week ago), never happened before with similar configurations.DE: Gnome, without gnome-power-managementAudio: Alsa + PulseCPU: Intel Core i5 540MGraphic: Nvidia, driver 256.53 (last version gives a black laptop LCD screen and is a no go for me)Modules: pcspkr AND snd_pcsp are not loaded (listed with ! in rc.conf MODULES array)Kernel: 2.6.35.8-ARCHAudio: Using card 0 from
    alessandro@alessandro-lappy:~$ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC275 Analog [ALC275 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: NVIDIA HDMI [NVIDIA HDMI]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    DB:3.06:[Solved] Random Beeps Through Sound-Card (Pcspkr Is Not Loaded) aa


    NOT WORKING - I still have beeps: After many days of search I might have made it two minutes after posting: Systems sound were unmuted in Gnome audio setting (What an idiot I am!).

    LAST EDIT: The culprit was a Google advert on the nvnews linux forum page, which I leave open to check some posts. I left the pulseaudio volume control window open and checked for applications making sounds. When the computer beeped the alsa chromium plugin was being used. I was using ad-block before reinstalling.

    Some questions for the crowd. Is there any other way to check what is using the sound card, in the case that I do not have pulseaudio running (or in the case that I do not want to stare at the monitor waiting for a beep).Is there something I can do to send to hell the advert developers for three days of beeps, logs reading, pulse reconfiguration, etc.?

    PS Ive left previous comments in this post, even though I do not think they will be useful to others.

    Cheers, and sorry for the really big noiseAlessandro

    Last edited by alexcriss (2010-11-15 13:50:08)

  • RELEVANCY SCORE 3.06

    DB:3.06:Problem With Vgn-Ar31s 1f



    Hello,

    I am new to vaio but i was just given this sony vaio VGN-AR31S laptop. I updated it to windows 7 but there was a problem : the nvidia GeForce Go 7600 GT card is now registered as simple VGA card and I cannot view HD movies any more. I tried to update the driver with windows, with the official nvidia website but it does not change a thing...

    Does anybody have a piece of advice for me?

    Thanks and best regards







    Solved!
    Go to Solution.

    DB:3.06:Problem With Vgn-Ar31s 1f


    First right click on the driver setup file and select " TROUBLESHOOT COMPATIBILITY" option. Tick the program worked in earlier version of windows, click next, then select windows vista, click next and click next again to install the driver.

    _______________

    The truth is a poor exscuse for lack of imagination

  • RELEVANCY SCORE 3.05

    DB:3.05:Nvidia Geforce Gt 640 And Dell Vostro 270 Late 2012 7a



    I have a Dell Vostro 270 which was fitted with a Nvidia GeForce GT 640 Video card and it worked fine until the hard drive packed up. Technical support fitted a new motherboard. When I installed Windows 8 the system started up to Dell sign and then blank screen forever. I understand this has to do with Bios version and the secure boot option off etc. but have gotten nowhere.

    Is there anybody who have solved this problem who might assist me? I would be eternally grateful....

    DB:3.05:Nvidia Geforce Gt 640 And Dell Vostro 270 Late 2012 7a


    Install WIN8 with the integrated video first in NON SECURE BOOT mode.

    Then add the card after you are online and have installed all the other drivers.

  • RELEVANCY SCORE 3.05

    DB:3.05:[Solved] Display Problem - Random Grid Appears On Screen 1j



    I have recently started using Arch with nvidia driver (I had a lot of problems getting nouveau to even work so I decided to try nvidia) and I started experiencing rather odd problems. Every now and then, at random, the screen starts displaying grid over all windows. Screenshot

    Dock (cairo-dock) seems to be unaffected: ScreenshotAnd so is Youtube and surprisingly skype window.

    I am running Arch 3.4.3-1 (x86_64) with Compiz-Fusion and Cairo-Dock under Gnome 3.4.1. Nvidia was installed using nvidia package in [extra]

    Name : nvidiaVersion : 302.17-1URL : http://www.nvidia.com/Licenses : customDepends On : linux=3.4 linux3.5 nvidia-utils=302.17Conflicts With : nvidia-96xx nvidia-173xxArchitecture : x86_64Description : NVIDIA drivers for linux.Window manager is Emerald. Graphics card is GT220.

    There is nothing relevant in the log (that I can see). The only way (that I found) to solve this is restart X server.

    The same thing happens with gnome-shell.

    I have been suggested that its possibly libpng problem (due to transparency grid appearance) or something with the compositor. Either way I cant figure out how to find out exactly whats wrong or how to fix it.

    I would much appreciate any help - its really getting annoying.

    **EDIT:** Forgot to mention - compiz cube is displayed properly as well.

    Last edited by norfavrell (2012-06-30 00:58:01)

  • RELEVANCY SCORE 3.05

    DB:3.05:[Solved] Extra/Nvidia Package Problem 1f



    Hi, i am using 64bit arch with 32bit subsystem configured...BUT

    in 64bit extra/nvidia does not depend on nvidia-utils which is correctand i686 the same package extra/nvidia depends on nvidia-utils

    Can somebody fix this please?

    Last edited by microcz (2012-01-24 13:46:05)

    DB:3.05:[Solved] Extra/Nvidia Package Problem 1f


    No worries. I guess you just have to build nvidia-utils-bumblebee under your chroot first before installing nvidia.If your problem is solved, please add [solved] to the title by editing the first post.

  • RELEVANCY SCORE 3.04

    DB:3.04:[Solved] Failure To Start X With Nvidia Graphics Card 9p



    Apparently even after a 4th install of Arch on different machines I still cant get a working X server on the first try...

    The graphics card is
    02:00.0 VGA compatible controller: NVIDIA Corporation GT200b [GeForce GTX 285] (rev a1)

    DB:3.04:[Solved] Failure To Start X With Nvidia Graphics Card 9p


    Please remember to mark your thread as [Solved] by editing your first post and prepending it to the title.

  • RELEVANCY SCORE 3.04

    DB:3.04:Nvidia Kernel Mode Driver Problem zm


    Hello,for some time I've been having serious problem with my grapihics card. From time to time everything except sound freezes and screen goes black. At first it stayed that way for a few seconds, now it is up to two minutes. Then everything goes back to normal and Windows displays message "Display DriverNVIDIAWindowsKernel Mode DriverVersion 280.26has stopped working and has successfully recovered'.This happens with any driver downloaded from Nvidia site, but not with driver from Lenovo (at least I think so, it was ok for over a week, whereas with Nvidia driver it freezes almost every day). I could just use Lenovo driver, but driver is from 2009 (180.00 or something like that), and I actually need some new features.My laptop is Lenevo Y550, graphic card is Geforce 130m. Few months ago my laptop was at Lenovo service, because graphic card was overheating (there was a problem with a fan and it was replaced), and the problem started happening before that.It is worth noting that the problem occurs only when using Windows (using Internet, starting some applications etc), but never when I play any game, so I don't think the card is overheating again (especially since it is not simply powering down, like before.Do you have any idea what's the problem might be?







    Solved!
    Go to Solution.

  • RELEVANCY SCORE 3.04

    DB:3.04:Sound Problems..Nvidia Hda [Solved] jd



    heres the output of aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: NVidia [HDA NVidia], device 1: AD198x Digital [AD198x Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

    DB:3.04:Sound Problems..Nvidia Hda [Solved] jd


    heres the output of aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: NVidia [HDA NVidia], device 1: AD198x Digital [AD198x Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

  • RELEVANCY SCORE 3.04

    DB:3.04:Mudbox 2014 Works Nvidia Geforce Gt 750m 9j


    I wanted to know if a Dell Inspiron 14R with Nvidia geForce GT 750M, Intel Core i7, 8 GB RAM, Windows 8 64-bit and HD Touchscreen could to run Mudbox 2014 no error needing a ATI ou Nvidia card? Thanks.






    Solved!
    Go to Solution.

    DB:3.04:Mudbox 2014 Works Nvidia Geforce Gt 750m 9j


    If it's of any use, I have a Sony Vaio Flip with the GeForce GT 735M and Mudbox 2014 runs without the ATI or nVidia error message.

  • RELEVANCY SCORE 3.04

    DB:3.04:[Solved] Xorg Fails To Start : Failed To Load Nouveau d9



    Hello,

    i compiled a custom kernel yesterday and wanted to start using the nouveau Driver for my nvidia card to make things easier. So I deinstalled my nvidia driver.And installed nouveau-dri. Made sure that nouveau isnt still blacklisted in modprobe. Created /etc/X11/xorg.conf.d/20-nouveau.conf with
    Section Device
    Identifier nvidia card
    Driver nouveau
    Option GLXVBlank true
    EndSection

  • RELEVANCY SCORE 3.04

    DB:3.04:X Crashes On Gnome-Session / Gdm Logout, Corrupts Ttys (Nvidia) 3a



    Recently I had a problem with the NVIDIA proprietary drivers and X crashing after starting a gnome-session (with xorg-xinit) or when logging out to GDM, corrupting the tty consoles (random flickering white artefacts). It was simply solved by using NVIDIAs automatic configuration utility:
    nvidia-xconfig

    DB:3.04:X Crashes On Gnome-Session / Gdm Logout, Corrupts Ttys (Nvidia) 3a


    Recently I had a problem with the NVIDIA proprietary drivers and X crashing after starting a gnome-session (with xorg-xinit) or when logging out to GDM, corrupting the tty consoles (random flickering white artefacts). It was simply solved by using NVIDIAs automatic configuration utility:
    nvidia-xconfig

  • RELEVANCY SCORE 3.04

    DB:3.04:Video Card Problem 1a



    I have a Vaio SZ5XWN/C and have lost the ability to use the full screen and display on an external monitor.
    The display is shown as a Generic non p-n-p monitor on standard vga graphics adapter. Max resoloution is 1024*768 although my screen is 1280*800. Ihave tried downloading the NVIDIA driver from NVIDIA but no joy.I have tried checking with Driver Detective which says the video driver is OK. Not sure what to try next.






    Solved!
    Go to Solution.

    DB:3.04:Video Card Problem 1a

    Hi pcsmith,

    The driver from NVIDIA will not install on a Vaio without a modified .inf file.

    Try installing either the original driver or the Update version 7.15.10.9754, both of which can be downloaded from support.

    http://support.vaio.sony.eu/computing/vaio/downloads/updates/index.aspx?l=en_GBm=VGN-SZ5XWN_C

    Alternatively you may be able to reinstall the original driver via Vaio Recovery Center – Reinstall Programs or Drivers option.

    Rich




    Go n-éirí an bóthar leat

  • RELEVANCY SCORE 3.04

    DB:3.04:[Solved] Problem With Flash, Firefox And Probably Nvidia p8



    HelloSince some time I experience a lot of problems with the flashplugin in firefox. It crashes more often than usual, leaving even my X unusable, since fonts get smeared or pictures of the last flash video are displayed in the terminal emulator.

    I noticed that there was a upgrade of the fftw with the following output:
    upgraded fftw (3.2.2-1 - 3.2.2-2)

    If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.

  • RELEVANCY SCORE 3.04

    DB:3.04:[Solved] Nvidia 304.32-1 Brightness sf



    Does anyone else have a problem with nvidia 304.32-1 brightness problem in games like tremulous, quake 4, and others?The problem is that I cant adjust the brightness its stuck and in tremulous its too low.Im using 64bit version of arch and have a nvidia geforce gtx 460 768mb.I ended up downgrading nvidia, nvidia-utils, and lib32-nvidia-utils to 302.17 this version doesnt have this problem.

    Last edited by Dotslash (2012-08-28 14:27:58)

  • RELEVANCY SCORE 3.03

    DB:3.03:Nvidia Sli Issue, Screenshare/Webcam Flickering pd



    I have found that the issue is sli. When i turn this off the problem is solved.

    Wondering if i could fix this with sli on? (put single gpu now on skype only)

    Is it nvidia or skype problem? or me?

  • RELEVANCY SCORE 3.03

    DB:3.03:Lenovo N3000 200 0769 Bwg Graphics Card Problem 8k


    Hi, I am having one long beep and two short beeps on my laptop. My tech has advised that the graphic card needs to be replaced. This has 256MB graphic NVIDIA graphic card and I dont same again due to very known NVIDIA graphic card issues. http://www.nvidiadefect.com/nvidia-geforce-graphics-card-t1424.html 1. Can I use Intel graphic card instead of NVIDIA graphic 2. Is it possible to change the mother board with Intel Graphic card Regards SKD

    DB:3.03:Lenovo N3000 200 0769 Bwg Graphics Card Problem 8k

    pretty much imposible.usb ports things like that even the shape of the boards change alot.only thing you can do is turn one into a mini pc pretty much.some guys are doing pci links to grapics cards that you could do in a mini pc if you have the right cable made and can get the right speed of pci xpress.pretty much laptops are a toss away item after 4 -5 years.as for the beep you could buy a used one for parts but you can also find a used one working as well.kinda defeats the point.

  • RELEVANCY SCORE 3.03

    DB:3.03:[Solved]Nvidia Ck804 With Alc850 Does Not Work za



    When I start amarok i get this message Nvidia CK804 with ALC850 does not work.Falling back to default.My sound card is detected i have sound in kde and when i play something in smplayer (movie, mp3) but when i start amarok or JuK i get no sound.
    cat /proc/asound/cards
    0 [CK804 ]: NFORCE - NVidia CK804
    NVidia CK804 with ALC850 at irq 22

    DB:3.03:[Solved]Nvidia Ck804 With Alc850 Does Not Work za


    Thanks svejaka, your solution also worked for me!

    Still weird that KDE thinks the device doesnt work whilst it does actually work.

  • RELEVANCY SCORE 3.02

    DB:3.02:[Solved] Compiling Mplayer zp



    Ok, so after a small bit of research, it seems the package that you would get by using pacman -Sy mplayer is an old version and it is best to compile from SVN. so I was trying to follow the wiki

    http://wiki.archlinux.org/index.php/Com … r_From_SVN

    to do just that, however, i have run into a problem right at the beginning. i have an nvidia graphics card, and the proprietary drivers for it installed, and whenever I try to install libgl i get the following
    libgl conflicts with nvidia-utils. Remove nvidia-utils?

    DB:3.02:[Solved] Compiling Mplayer zp


    I went ahead and edited the PKGBUILD file and added the correch arch line, and it compiled and installed fine, it is also showing up in firefoxs add-ons list, havnt had a chance to test it yet though, still only gone to sites with flash video.

    peace

  • RELEVANCY SCORE 3.02

    DB:3.02:[Solved]Gnome 3.14 User Switch Not Working 9j



    Hi everybody, happy new year.

    I noticed quite recently that user switching doesnt work on GNOME 3.14 anymore.Im using nVidia drivers (343.36 from repo), I dont know if its the one thing responsible for this, as desktop experience with their driver is becoming quite buggy in recent years.

    Does anyone experience the same problem?(I know its not a very widely used feature but I got used to share the same computer at home and sometimes it proved to be very useful...)

    Thanks in advance.

    [Edit] Im not talking about closing session, but switching between users on the fly...

    [Solution] Fixed with nVidia drivers 346.35= Its more complicated than that! In fact package nvidia-346.35-2 forced me to create the following file in order to be able to start X:
    /etc/X11/xorg.conf.d/20-nvidia.conf

    Section Device
    Identifier Nvidia Card
    Driver nvidia
    VendorName NVIDIA Corporation
    EndSection

    DB:3.02:[Solved]Gnome 3.14 User Switch Not Working 9j


    Omer666,

    This also fixed the problem I was having. The specific steps to reproduce the problem were as follows:

    1. Log in as user1. (start some apps)2. Click Switch User3. Log in as user2.4. Log out5. Log back in as user1.

    At this point without the above mentioned fix. user1s session will be restarted (or maybe it was killed when we clicked Switch User).

    Im running the nvidia drivers version 346.35-6.

  • RELEVANCY SCORE 3.02

    DB:3.02:Adding Nvidia Geforce Gtx 285 As A Second Card ! 19


    I have a NVIDIA card that cam with my mac pro, then I got the NVIDIA GeForce GTX 285 to use as my main card but I would like to use the NVIDIA as a secondary card I usually have two displays + my cintiq connected. Here's the problem the NVIDIA GeForce GTX 285 takes two power cables leaving none for the NVIDIA card.

    But I noticed there's a cable left for a second dvd burner could I use that for my second card or can I split one of the two available for the grfx cards?

    DB:3.02:Adding Nvidia Geforce Gtx 285 As A Second Card ! 19

    I have a NVIDIA card that cam with my mac pro, then I got the NVIDIA GeForce GTX 285 to use as my main card but I would like to use the NVIDIA as a secondary card I usually have two displays + my cintiq connected. Here's the problem the NVIDIA GeForce GTX 285 takes two power cables leaving none for the NVIDIA card.

    But I noticed there's a cable left for a second dvd burner could I use that for my second card or can I split one of the two available for the grfx cards?

  • RELEVANCY SCORE 3.02

    DB:3.02:Problem Installing Nvidia Driver On E5-571g 33


    I recently bought an Acer E5-571G. It was sold as being without operating system - but it had Linux on. I finally managed to install windows 7 Home Premium 64 bit. I updated the drivers including the Intel Hd graphics.I cannot install the nvidia driver for the 840M graphics card. The drivers on the resource DVD or the acer website don't work. I've tried different versions, including windows 8 drivers.i get a compatibility error message:NVIDIA Installer cannot continueThe NVIDIA graphics driver is not compatible with this version of windows.This graphics driver could not find compatible graphics hardware.Can anyone help?ThanksSteveCan you please help? Thanks.Steve






    Solved!
    Go to Solution.

    DB:3.02:Problem Installing Nvidia Driver On E5-571g 33


    double click on the device with the Yellow exclamation mark and click on driver tab, click to install manually the drivers and point to the folder where the modified .inf is.

    let me know if windows will pop up errors about unsigned drivers.




    If i was helpful, a KUDOS is appreciate and remember to mark "Accept as Solution", the post that solved your problem.I'm not an Acer employee, i'm unemployed

  • RELEVANCY SCORE 3.02

    DB:3.02:Problem With Nvidia Geforce Gt520mx ff


    I have a laptop ASUS K53SC with windows 7 64 bit, Intel HD 3000 integrated video card and dedicated video card Nvidia GeForce GT520MX.
    I have problems with the start of some games with the Nvidia card, if I start the game with the Intel card , the game starts but is triggered, and if I start with the Nvidia card the game tries to boot but hangs with black screen and show the error ***. exe has stopped working.
    In the Nvidia control panel I have everything set as factory.
    I tried to update the bios to 221 and drivers Nvidia to 344.75 but the problem persists.
    Then I tried to download the graphics driver from Asus site, I think 244.56 driver, but the problem persists.
    Doing an analysis with 3D Mark Benchmark Nvidia video card does not seem to cause problems and the score is average.
    My opinion is that the problem is in the switch from one card to another, I refer to Nvidia Optimus, even if the problem occurs even if I starts with Nvidia graphics processor.
    Which can be a solution to start the game without problems with Nvidia card?

    DB:3.02:Problem With Nvidia Geforce Gt520mx ff

    The computer is no longer under warranty and I would prefer not to send him assistance, unless absolutely necessary, because they would erase all the data on my computer.

  • RELEVANCY SCORE 3.02

    DB:3.02:Nvidia Gtx480 Card Overheating When Photoshop Cc2014 Is Started (Even With No Canvas Open) On Win7 64 Os fz



    hi,

    nvidia GTX480 card overheating when photoshop CC2014 is started (even when idle) on win7 64 os

    anybody has this isue or has solved it?

    thanks!

    DB:3.02:Nvidia Gtx480 Card Overheating When Photoshop Cc2014 Is Started (Even With No Canvas Open) On Win7 64 Os fz


    All the GPU should be doing at that point is compiling shader and OpenCL kernels.

    HAve you updated your drivers from NVidia's website?

    Have you asked NVidia about why the driver software is heating up the GPU while it should be idle?

  • RELEVANCY SCORE 3.02

    DB:3.02:Xps M170 Nvidia Video Card px


    I recently replaced the nvidia 6800 video card that went bad to an nvidia 7800. It works fine but the screen is flickering. I had the same problem with a replaced nvidia 6800 but exchanged it for the 7800 hoping to solve the problem. Any ideas?

    DB:3.02:Xps M170 Nvidia Video Card px

    I tried the external monitor. Still the same.

  • RELEVANCY SCORE 3.02

    DB:3.02:[Solved]Problems With Correctly Configuring X jz



    Hello! Im new to this forum, but not that new to Arch. In past I managed to get it working, but now I have a wireless USB mouse and keyboard and I just cant get X to work right. I have nvidia card (6600) so i instlled nvidia package, and did
    nvidia-xconfig

  • RELEVANCY SCORE 3.02

    DB:3.02:[Solved] Blue Tint On Youtube Videos. (Nvidia Or Flash Problem) f8



    Im not 100% sure if this is related to my nvidia card or flash.. First here is a picture of the error: http://dl.dropbox.com/u/26061302/blueyoutube.png

    I tryed to search google with no luck. Then i tryed to download the same youtube video with movgrab (AUR) and it turned up with fine colors with VLC.So im guessing with a flash error.Btw. i have also tryed in firefox, same issue.

    Anyone have som ideas?

    Last edited by vooze (2012-03-18 14:18:39)

    DB:3.02:[Solved] Blue Tint On Youtube Videos. (Nvidia Or Flash Problem) f8


    Im seeing the same blue tint problem but I also get another problem. The flash video stays on the screen even when I minimize the browser. Also if I scroll the web page up while the flash video is playing the video will eventually appear above and outside the browser window.

  • RELEVANCY SCORE 3.01

    DB:3.01:Problem With Nvidia Nvlddmkm Driver 88



    Hi guys,

     

    Couple days ago I got the problem with Nvidia nvlddmkm Driver. I did try to update the driver on Nvidia and Dell website however that has not solved the problem. Could you please tell me how do due with this problem?

    Thank you very much.

    DB:3.01:Problem With Nvidia Nvlddmkm Driver 88

    DuyNguyen wrote:

     

     

    Now I cannot turn on my computer.

     

     

    Literally?  A graphics driver/file problem wouldn't suddenly cause a complete lack of power to your laptop?

    It might be time to contact tech support now.

  • RELEVANCY SCORE 3.01

    DB:3.01:[Solved]Wine And Nvidia-96xx ps



    Hi. Just switched to arch from Debian, loving it so far. First major problem I ran into is, of course, wine related.

    Trying to get Diablo 2 running in wine. I have an ancient nVidia Geforce 4 Ti 4800 card in my machine, because I couldnt get my (slightly newer, but still ancient) ATI Radeon X1650 running in Debian. Had no problem with the nVidia card on Debian with the same wine version.
    Error: API mismatch: the NVIDIA kernel module has version 96.43.14, but this NVIDIA driver
    component has version 190.42. Please make sure that the kernel module and all NVIDIA
    driver components have the same version.

    DB:3.01:[Solved]Wine And Nvidia-96xx ps


    Cracked it. For whatever ridiculous reason, wine didnt want to run apps off my other hard drive, whether I symlinked the D2 dir or mounted it. Copying Diablo 2 to the drive where I have arch installed solved the problem. Guess Ill file a bug with wine. Now to erase Debian from my life (well, almost, its still running on my server ). Thanks for all the help guys!

  • RELEVANCY SCORE 3.01

    DB:3.01:[Solved] No Sound With A Nvidia Mcp51 High Definition Audio da



    Hello,The sound doesnt work with my nVidia Corporation MCP51 High Definition Audio sound card. Ive installed the packages alsa-utils and alsa-oss.
    $ lspci | grep Audio
    00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)

    $ aplay -l
    **** Liste des Périphériques Matériels PLAYBACK ****
    carte 0: NVidia [HDA NVidia], périphérique 0: ALC883 Analog [ALC883 Analog]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 0: NVidia [HDA NVidia], périphérique 1: ALC883 Digital [ALC883 Digital]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0

    DB:3.01:[Solved] No Sound With A Nvidia Mcp51 High Definition Audio da


    I had the same issue today, sudo rmmod snd_hda_intel and then sudo modprobe snd_hda_intel and my sound card listed and worked again.

  • RELEVANCY SCORE 3.01

    DB:3.01:Audio Wont Work Over Displayport-Hdmi (Mcp89, Nouveau) 71



    Hey there. I got a problem getting audio working over HDMI using DisplayPort on my MacBook7,1 which I boot viarEFInd in EFI mode. The laptop has Nvidia GeForce 320M (NV50) with MCP89 High Definition Audio which, according to the nouveau support matrix, works with the nouveau driver. Im using PulseAudio and it outputs several HDMI profiles but none that actually work.Heres a list of the profiles made by aplay -L:
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=NVidia
    HDA NVidia, Cirrus Analog
    Default Audio Device
    front:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Analog
    Front speakers
    surround40:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=NVidia,DEV=0
    HDA NVidia, Cirrus Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=NVidia,DEV=0
    HDA NVidia, HDMI 0
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=1
    HDA NVidia, HDMI 0
    HDMI Audio Output
    hdmi:CARD=NVidia,DEV=2
    HDA NVidia, HDMI 0
    HDMI Audio Output

  • RELEVANCY SCORE 3.01

    DB:3.01:[Solved] Problems Autostarting Xbmc After Nvidia Upgrade am



    Hello!

    With nvidia version 302.17-1 and with 302.17.2 xorg errors and fails when autostarting xbmc.:Here is my Xorg.0.log: https://gist.github.com/3118969

    Here is my xorg.conf:https://gist.github.com/3118996

    But downgrading nvidia and nvidia-utils to version 295.59 makes everything work again.So is this considered as a bug or can I change my configuration to make it work with latest nvidia drivers?My graphics card is PCI and not PCIe, maybe there is some problem with old PCI cards?

    I am now using standard xbmc package in repositories (earlier I used xbmc-pvr-git but I changed to standard xbmc to see if it was a problem even without using AUR packages).

    Last edited by ronnylov (2012-07-17 14:04:32)

    DB:3.01:[Solved] Problems Autostarting Xbmc After Nvidia Upgrade am


    I just manually removed the file /usr/lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz as root (actually moved it to my home directory if I would need it again) and then performed the upgrade of nvidia and nvidia-utils.I think the symlink from /lib to /usr/lib caused some confusion for pacman when downgrading nvidia (maybe pacman see this as some kind of conflict when examining the old package). Or maybe I am just wrong.

    However this is what I have done:
    [ronny@htpc ~]$ sudo mv /usr/lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz /home/ronny/
    Lösenord:
    [ronny@htpc ~]$ sudo pacman -Syu --ignore cairo
    :: Synkroniserar paketdatabasen...
    core är senaste versionen
    extra är senaste versionen
    community är senaste versionen
    :: Påbörjar full systemuppgradering...
    varning: cairo ignorerar uppgradering av paket (1.10.2-3 = 1.12.2-2)
    löser beroenden...
    letar efter inre konflikter...

    Mål (2): nvidia-302.17-2 nvidia-utils-302.17-1

    Total Installationsstorlek: 50,59 MiB
    Nettouppgraderingsstorlek: 0,02 MiB

    Fortsätt med installation? [Y/n]
    (2/2) kontrollerar paketintegritet [######################] 100%
    (2/2) laddar paketfiler [######################] 100%
    (2/2) kontrollerar filkonflikter [######################] 100%
    (2/2) kontrollerar tillgängligt filutrymme [######################] 100%
    (1/2) uppgraderar nvidia-utils [######################] 100%
    (2/2) uppgraderar nvidia [######################] 100%
    [ronny@htpc ~]$ ls -al /usr/lib/modules/extramodules-3.4-ARCH/
    totalt 4216
    drwxr-xr-x 2 root root 4096 17 jul 14.55 .
    drwxr-xr-x 4 root root 4096 3 jul 17.36 ..
    -rw-r--r-- 1 root root 9849 4 jul 05.50 lirc_atiusb.ko.gz
    -rw-r--r-- 1 root root 4735 4 jul 05.50 lirc_i2c.ko.gz
    -rw-r--r-- 1 root root 6081 4 jul 05.50 lirc_wpc8769l.ko.gz
    -rw-r--r-- 1 root root 4272613 4 jul 02.39 nvidia.ko.gz
    -rw-r--r-- 1 root root 13 3 jul 17.36 version