• RELEVANCY SCORE 4.04

    DB:4.04:Evolution Mk449c Mod Wheel Problem With Logic Pro/Vsl Performance Tool 87




    I'm using the latest version of Logic Pro on a new Intel Mac Pro. My controller keyboard is the Evolution MK449C, connected via a USB cable.

    When using a Logic Audio Instrument assigned to the ESX Sampler Plug-in (running various samples, mostly from the Vienna Symphonic Library,) Logic's Transport Window doesn't register any modulation information generated from my keyboard.
    As the VSL Performance Tool relies heavily on the Mod Wheel info to effect the sounds, I'm at a bit of a loss to spot the solution. When I assign a different conroller to the Mod Wheel, i.e. volume, pan, pitch bend, etc., I can see the info in the Transport Window with no problem, so I know the wheel itself is working okay.
    Has either Logic or the ESX got some kind of controller filter, - maybe I've accidently turned something on that cuts out any incoming modulation. Can anyone help?

    Thanks

    Mac Pro Mac OS X (10.4.8)

    DB:4.04:Evolution Mk449c Mod Wheel Problem With Logic Pro/Vsl Performance Tool 87

    I'm using the latest version of Logic Pro on a new Intel Mac Pro. My controller keyboard is the Evolution MK449C, connected via a USB cable.

    When using a Logic Audio Instrument assigned to the ESX Sampler Plug-in (running various samples, mostly from the Vienna Symphonic Library,) Logic's Transport Window doesn't register any modulation information generated from my keyboard.
    As the VSL Performance Tool relies heavily on the Mod Wheel info to effect the sounds, I'm at a bit of a loss to spot the solution. When I assign a different conroller to the Mod Wheel, i.e. volume, pan, pitch bend, etc., I can see the info in the Transport Window with no problem, so I know the wheel itself is working okay.
    Has either Logic or the ESX got some kind of controller filter, - maybe I've accidently turned something on that cuts out any incoming modulation. Can anyone help?

    Thanks

    Mac Pro Mac OS X (10.4.8)

  • RELEVANCY SCORE 2.65

    DB:2.65:Articulation Works, Then It Doesn't 8x




    I'm running Logic Pro 7.2.3 on MacPro 2.66 with 2 gigs of RAM. I have a cheap evolution Keys 49 Midi keyboard that has pitch bend and modulation wheels. I am using Jam Pack 4 to compose symphony tracks.

    When I create a new Logic song/project, the mod wheel on my keyboard handles articulation perfectly. Using cello as an example, it switches from legato to staccato fine. Here's the problem: When I close or quit the song and return, the mod wheel doesn't function. The cello is locked into legato mode. The transport window shows that Logic is reading the articulation data, but no articulation is heard. I know it's not the keyboard because I can bring the same cello instrument up in Garageband and the articulation works everytime.

    Has anyone had this problem?

    MacPro 2.66 2GB RAM Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

    DB:2.65:Articulation Works, Then It Doesn't 8x

    It's good to know someone else is having a similar problem (if one can call that good!)

    I've been poking around and I've also noticed this: If I create a cello part in Garageband, articulation works everytime I open it. If I take that Garageband song and open it in Logic, articulation still works everytime I open it. The Logic file in this instance is saved as a "Logic Song." I don't know how to tell, but I'm assuming the Logic song is drawing it's sound files from the Garageband song (I don't know how to check that).

    However, if I save the newly created Logic song as a project - with all sound files being copied to folders within a master project folder - articulation does not work when I reopen the file.

    Strange. And frustrating.

    MacPro 2.66 2GB RAM Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

  • RELEVANCY SCORE 2.57

    DB:2.57:Evolution 3.01 Problem With Imap And Gmail 81





    Im having some problems with imap and gmail in Evolution. There is a problem when retriving new messages it seems. The problem is that I recive a mail(checked by going to gmail.com) which Evolution hasnt recived, tried to make Evolution retrive all mails still nothing, even after a restart of evolution it still couldnt get it. Then I started Thunderbird which was capable of retriving the message, then all of a sudden Evolution also retrives it. Has anyone experienced something similar or have a solution? Gmail is configured to use Imap+. Not sure if I should make a bug repport upstream or not, tried searching bugtracker but couldnt find anything that resembled my problem.

    DB:2.57:Evolution 3.01 Problem With Imap And Gmail 81


    The problem for me seems to be Evolution filtering messages, turned off all filtering and now it seems to be behaving

  • RELEVANCY SCORE 2.51

    DB:2.51:Evolution And Electronical Certificates Problem 73



    Hi, I have a problem with importing any of certificates into Evolution. Id like to use the Evolution, but I use elect. sign, so I tried to import my certificate, it asks for password, I have entered it and nothing happens, no error no info, just empty list of certificates, in friends certificates at notebook Contact certificates is same problem, I have removed $HOME/.evolution and try to do again, I have reinstalled, but the same. Has anybody same problem?

    DB:2.51:Evolution And Electronical Certificates Problem 73


    Hi, I have a problem with importing any of certificates into Evolution. Id like to use the Evolution, but I use elect. sign, so I tried to import my certificate, it asks for password, I have entered it and nothing happens, no error no info, just empty list of certificates, in friends certificates at notebook Contact certificates is same problem, I have removed $HOME/.evolution and try to do again, I have reinstalled, but the same. Has anybody same problem?

  • RELEVANCY SCORE 2.42

    DB:2.42:Won't Take Discs And Won't Start cj


    My iBook G4 is 1 year and 2 months old - unfortunately my warranty JUST ran out. I have never had a problem with my computer before....it was sleeping the other night and it woke me up because it was so loud. It was making wierd noises/crackling sounds. I forced a shut down. Now, when I start it up, it goes to the Apple screen with the wheel turning...and then the wheel just suddenly stops. And it all of a sudden won't take any CD's or DVD's, so I can't even install OS or run hardware tests.

    I called Apple support...they think it might be the logic board but it' going to cost $700 for them to fix. Does anyone have any other suggestions? Thanks!

    DB:2.42:Won't Take Discs And Won't Start cj

    Do you have access to another Mac with FireWire? If so, you may be able to run the Disk Utility from that computer on your iBook's hard drive since you can't use your CD drive on the iBook. You can use FireWire Target Disk Mode to access your iBook's hard drive from another Mac. If you can't startup in "target" mode, then it's more likely that your logic board is having trouble than your hard drive.

    -Doug

  • RELEVANCY SCORE 2.42

    DB:2.42:Evolution 3.2.2-1 Issue With Online Accounts (Google Calendar) 8c



    I have my Google account in the online accounts feature in gnome 3, so I was hoping the gnome 3 calendar would show my Google Calendar events, without success.

    I did a quick search on google on how to achieve this, and I found this guide

    I figured I needed to install evolution since it wasnt installed in the first place, which I did, but I found a Google Calendar already set (I guess due to the online accounts thing) and also an IMAP account for Gmail.

    My problem is that the Google Calendar on evolution is not syncing, and if I try to close evolution then it hangs and I have to do xkill.

    Thanks in advance

    DB:2.42:Evolution 3.2.2-1 Issue With Online Accounts (Google Calendar) 8c

    prasinoulhs wrote:
    Try this (https://github.com/vintitres/gnome-shel … e-calendar) python script, works fine for me .

  • RELEVANCY SCORE 2.39

    DB:2.39:Evolution-Mapi Send Issue c3



    If anyone is familiar with evolution-mapi, perhaps you can help me. I have no problem connecting to our exchange (2007) server. I have full access to my mailbox and can sync and read my mail. My issue is I cannot send. I get this error message:
    Could not send message: WriteStream: MAPI error MAPI_E_CALL_FAILED (0x80004005) occurred

    DB:2.39:Evolution-Mapi Send Issue c3


    If anyone is familiar with evolution-mapi, perhaps you can help me. I have no problem connecting to our exchange (2007) server. I have full access to my mailbox and can sync and read my mail. My issue is I cannot send. I get this error message:
    Could not send message: WriteStream: MAPI error MAPI_E_CALL_FAILED (0x80004005) occurred

  • RELEVANCY SCORE 2.38

    DB:2.38:Griffin Powermate With Logic 79


    is anyone using the griffin powermate with logic? am thinking of picking one up to use as a jog/shuttle wheel and play button. does it configure easily to do this in logic? does it work well?

    apologies if there's already been a thread on this..

    DB:2.38:Griffin Powermate With Logic 79

    In the Powermate control panel you can assign a particular function, i.e., long-click, to send any key command, such as Command + Y, for snipping audio. I'm not sure if it has built-in command for Logic or not, I've had a couple different version of the Powermate software now, they didn't work quite the same.

  • RELEVANCY SCORE 2.37

    DB:2.37:Exchange 2007 + Evolution-Mapi + Evolution Login Problem c9



    Hi, I have succesfully installed evolution-mapi 3.0.2-1 in evolution 3.0.2-1 in order to connect to my companys Exchange server but im unable to do it, im getting Authentication failed.MapiLogonProvider: Failed to login into the server

    My config:

    Server Type: Exchange MAPIConfigurationServer: exch.mydomain.comUser Name: myuserDomain: mydomain.comSecure Connection: true

    Here I paste my debug info:--------------------------------------------------------------------------------------------------------------------------------------------------------e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)(evolution:1912): libexchangemapi-DEBUG: Create profile with myuser@mydomain.com@exch.mydomain.com

    (evolution:1912): libexchangemapi-DEBUG: Logging into the server...(evolution:1912): libexchangemapi-DEBUG: Deleting profile myuser@mydomain.com@exch.mydomain.com---------------------------------------------------------------------------------------------------------------------------------------------------------

    I also tried the ip instead of fqdn name and the domain name all in caps, but nothing works

    kernel: 2.6.39-ARCH 64 bitsgnome version: 3.0.2

    Please help!!!! i need this in order to finally erase the fuc**** Windows from my laptop!!

    Last edited by jorel1981 (2011-06-29 16:28:38)

    DB:2.37:Exchange 2007 + Evolution-Mapi + Evolution Login Problem c9


    If Im in the same network of the Exchange server after trying to connect i get Segmentation Fault and evolution closes

  • RELEVANCY SCORE 2.35

    DB:2.35:Live Chat With Evolution Studios jz



    hopefully more stuff will be revealed for Apocolypse:

    http://blog.eu.playstation.com/2010/07/22/live-cha​t-with-evolution-studios/

    DB:2.35:Live Chat With Evolution Studios jz


    hopefully more stuff will be revealed for Apocolypse:

    http://blog.eu.playstation.com/2010/07/22/live-cha​t-with-evolution-studios/

  • RELEVANCY SCORE 2.34

    DB:2.34:Thread: Evolution Client Subfolders sp


    I am unable to create and use any subfolders via Evolution on Groupwise

    (Linux). Evolution will crash shortly after attempting to access a

    subfolder. Seems like such an obvious problem I have probably something

    misconfigured? Evolution is configured as a Groupwise Client.

    -Mike

    DB:2.34:Thread: Evolution Client Subfolders sp

    Preston Stephenson wrote:

    We have two test servers. They are not very robust servers. They are many

    used to test specific problems.

    My guess is that it is size related, as many issues I\'ve had with

    Evolution testing were due to the amount of items in my mailbox.

    -' + '-

    Danita Zanre

    Novell Support Forums Volunteer

    GroupWise 7 Upgrade Guide!

    www.caledonia.net/gw7upg.html

  • RELEVANCY SCORE 2.33

    DB:2.33:Evolution 2.24.3 Seems Quite Buggy pj



    I upgraded to Evolution 2.24.3 the other day and Im finding it very buggy compared to the last version. The main problem Im having is its interaction with my main imap account. It isnt marking mail as read in imap when it is read in evolution so sometimes when moving mail from one folder to another imap moves it as unread.

    It has also randomly closed down a few times for no apparent reason.

    Is this just me or is anyone else having problems with it?

    DB:2.33:Evolution 2.24.3 Seems Quite Buggy pj


    I upgraded to Evolution 2.24.3 the other day and Im finding it very buggy compared to the last version. The main problem Im having is its interaction with my main imap account. It isnt marking mail as read in imap when it is read in evolution so sometimes when moving mail from one folder to another imap moves it as unread.

    It has also randomly closed down a few times for no apparent reason.

    Is this just me or is anyone else having problems with it?

  • RELEVANCY SCORE 2.33

    DB:2.33:Cannot Synchronize My Google Calendar Account With Evolution. kj



    Hello.

    Since last upgrade of evolution-data-server, I cannot synchronize anymore my google calendar datas. I thought it was related to my computer, but when I made a clean install of archlinux with gnome in a VirtualBox machine, I got the same problem : Evolution dropdown menu is empty. No more tasks listed.

    I opened evolution and get this error message :
    Unable to connect to Agenda: Unable to open the calendar: Authentication Required

    DB:2.33:Cannot Synchronize My Google Calendar Account With Evolution. kj

    djwave28 wrote:
    This is not a solution, but I did find out that disconnecting and reconnecting to the internet does reset the state of the google account into active. After doing this step my Evolution mail client is not crying at me and synchronizes fine.

  • RELEVANCY SCORE 2.32

    DB:2.32:Latest Evolution-Exchange Doesnt Update Inbox List kx



    Hi there,

    I just updated to the latest released evolution-exchange package and it seems to have a problem. It doesnt update my Inbox with new messages.

    Older version works just fine -- its with the latest release. Anyone else see this problem?

    Thanks
    Norm

    DB:2.32:Latest Evolution-Exchange Doesnt Update Inbox List kx


    Ok. Its still happening to me with the older version...Only about 4 - 5 times an hour now...so I guess thats an improvment.

  • RELEVANCY SCORE 2.32

    DB:2.32:F1 2013 With Logitech Driving Force Gt Wheel 3a



    Hi has anyone else got this game and wheel set up? Whats the ideal setting for the wheel to avoid the turning problems on it? I had the same problem on last years game so i expect the same on this years.

    DB:2.32:F1 2013 With Logitech Driving Force Gt Wheel 3a


    Hi has anyone else got this game and wheel set up? Whats the ideal setting for the wheel to avoid the turning problems on it? I had the same problem on last years game so i expect the same on this years.

  • RELEVANCY SCORE 2.32

    DB:2.32:No Printers Displayed In Evolution On Solaris 10 X86 ap


    I hope somebody can help me. I have a great problem with some applications, for example firefox or evolution.

    No printers are displayed in evolution or firefox.

    following Software are installed:

    Solaris SunOS XXXXX 5.10 Generic_120012-14 i86pc i386 i86pc
    CSWcups 1.2.7,REV=2007.01.22
    evolution. 1.4.6.322

    the following links were set:

    /usr/bin/lp /opt/sfw/bin/lp
    /usr/bin/lpstat /opt/sfw/bin/lpstat
    /usr/bin/cancel /opt/sfw/bin/cancel
    /usr/bin/enable /opt/sfw/bin/enable
    /usr/sbin/lpadmin /opt/sfw/sbin/lpadmin
    /usr/sbin/lpmove /opt/sfw/sbin/lpmove
    /usr/sbin/accept /opt/sfw/sbin/accept

    lpstat -v shows
    device for test: socket://phpb0001:9100

    gnome-print-manager displayed the printer.

    Why I cant select printers in evolution now?
    Pls help me. Its urgent.

    Thx for your helps
    Marco

    DB:2.32:No Printers Displayed In Evolution On Solaris 10 X86 ap

    Hello folks,

    I have found one which could work other possibilities. Does anybody have experience with PAPI over cups? I would like to know who has experience with PAPI about cups and how its configured. One then also should be able to select a printer about evolution.

    kind regards and thx for your help.
    Marco

  • RELEVANCY SCORE 2.32

    DB:2.32:Mod Wheel Difficulties kp


    Hi there,

    Im getting more into the modwheel aspects of software such as Garritan and EastWest Gold Symphonic Orchestra but my keyboard doesnt have a mod wheel or a pitch wheel

    So

    1. Can I buy an external stand alone mod wheel that plugs in as a usb midi device? Does anyone know anywhere that might have this?
    2. If not then is there a virtual mod wheel plug in I could use, or is it possible to edit all the midi information sent from the mod wheel using automation data in Logic? I notice Garritan has a virtual mod wheel, is there a plug in that could be downloaded to use with EastWest?
    3. My ancient keyboard has a pitch wheel but its spring loaded, is it worth getting this out and trying to assign it as a mod wheel or is it just not worth it? (plus its only 2 octaves.
    4. My keyboard is a really expensive full scale fully weighted stage piano so Im reluctant, actually cant afford a full size mod wheel one, should I get a small keyboard with a mod wheel and use this after inputting the notes on the other keyboard or is that not worth it either?
    5. Can anyone recommend any other solutions to my problem or a really good cheap midi controller keyboard?

    Thanks for any help anyone can give! Im really worried that I dont really have an easy way out here without buying a new keyboard :s.

    All the best,

    Blair

    iMac G5 2.1 Power pc 1.5 Gb Ram Mac OS X (10.4.9)

    DB:2.32:Mod Wheel Difficulties kp

    Hi there,

    Im getting more into the modwheel aspects of software such as Garritan and EastWest Gold Symphonic Orchestra but my keyboard doesnt have a mod wheel or a pitch wheel

    So

    1. Can I buy an external stand alone mod wheel that plugs in as a usb midi device? Does anyone know anywhere that might have this?
    2. If not then is there a virtual mod wheel plug in I could use, or is it possible to edit all the midi information sent from the mod wheel using automation data in Logic? I notice Garritan has a virtual mod wheel, is there a plug in that could be downloaded to use with EastWest?
    3. My ancient keyboard has a pitch wheel but its spring loaded, is it worth getting this out and trying to assign it as a mod wheel or is it just not worth it? (plus its only 2 octaves.
    4. My keyboard is a really expensive full scale fully weighted stage piano so Im reluctant, actually cant afford a full size mod wheel one, should I get a small keyboard with a mod wheel and use this after inputting the notes on the other keyboard or is that not worth it either?
    5. Can anyone recommend any other solutions to my problem or a really good cheap midi controller keyboard?

    Thanks for any help anyone can give! Im really worried that I dont really have an easy way out here without buying a new keyboard :s.

    All the best,

    Blair

    iMac G5 2.1 Power pc 1.5 Gb Ram Mac OS X (10.4.9)

  • RELEVANCY SCORE 2.31

    DB:2.31:Playseats / Logitech G25 7k


    What do you guys think of the playseats for use in driving games? I am looking at getting a driving seat for my ps3 and my preference was for the playseat evolution (with extra gear stick holder) and then for the logitech g25 steering wheelset.

    Its frightenly expensive but it does look the business. Any of you guys have this particular setup and what do you reckon?

    Playseats in the uk
    http://www.tgrav.com/ProductCategories.aspx?catid=722
    Logitech steering wheel G25
    http://www.amazon.co.uk/Logitech-G25-Racing-Wheel-PC/dp/B000I7NRNC/ref=pd_bbs_sr_1?ie=UTF8s=videoga...

    DB:2.31:Playseats / Logitech G25 7k

    check this out: http://www.youtube.com/watch?v=dRdF0wOBi4w
    kind of makes the G25 with racing seat look like a pile of crap!!



  • RELEVANCY SCORE 2.31

    DB:2.31:Logic Control Jog Wheel? ap


    Hi! been trying to find out how to get jog wheel to snap to start of bar rather than to division i stopped sequencer at e.g if i stop at say the 5th 16th of a bar and move to next bar with jog it snaps to same , pain?? thanks Ronny.

  • RELEVANCY SCORE 2.31

    DB:2.31:Does Anyone Have Problem With Wheel Mouse ? (Win7) zp


    I have recently updated on WINDOWS7.

    the troublesome happens when I move the wheel on the mouse.

    what ever I do ...

    Move wheel upward or downward , .. it only goes DOWN.

    I use Microsoft explore mini mouse.

    the wheel works fine with other toos.

    if anyone solve this troublesme . please share the knowlegde.

    I know this issue might not be so significant but , it makes low performance on working with jdeveloper

    DB:2.31:Does Anyone Have Problem With Wheel Mouse ? (Win7) zp

    Have you tried Googling around? As I recall, it was fixed in a subsequent version of JDK6, and there was some indication that it was related only to Microsoft mice and/or Microsoft Intellipoint.

    John

  • RELEVANCY SCORE 2.31

    DB:2.31:Volume Fader And Sends Have Only 128 Steps Resolution ????? xa


    Hi .
    I Notice that the Volume Fader and Sends have only 128 Steps Resolution ?????
    To avoid of the REAL problem you can use the Gainer Plug in and you will get 0.1db Steps for Volume with mouse wheel support...
    Why is this not fixed yet...Is Logic Pro not a Professionel Music app .
    In compare to other Application like Cubase has Full mousewheel support for ALL Mixing parameter (Volume, Send, etc) with a High resolution.
    Love to Mix with Logic but put every time the Gain plug in in every track to have higher Volume resolution takes time.
    We need higher Resolution for Faders AND Sends, icl Mousewheel support !!..

    Do somebody notice this??

    G5 DUAL 2Ghz Mac OS X (10.4.5) WAVES, Powercore, Logic 7.2

    DB:2.31:Volume Fader And Sends Have Only 128 Steps Resolution ????? xa

    logic's name's been changed to protect the guilty.
    i keep on pushing that logic's audio engine needs a total re-write.(with bus modelling)

    G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

  • RELEVANCY SCORE 2.31

    DB:2.31:Logic Does Not Support Usb Midi Keyboards!? zf


    Hey there,

    is it correct that logic 7.2.1 does not support MIDI-Keyboards that are
    connected via USB??
    I got a Evolution (m-audio) MK-249C which is found from my System
    (Apple Profiler in OsX 10.4.6) with full name as usuall. But although the m-audio guys say online that I don't need no driver and I can "plug 'n play"...
    Logic does not respond to it anyhow....
    Am I wrong in some way - what can I do or try...

    MacBook Pro 2Ghz Core Duo/ G4 Sawtooth 450 Mhz Dual Core Mac OS X (10.4.6) Logic 7.2.1 / MotU 828 / Yamaha 03R....

    DB:2.31:Logic Does Not Support Usb Midi Keyboards!? zf

    Hey,
    you must install driver! 249C not working without special patch, see www.m-audio.com - support - drivers and browse download matrix.

    G5 dualcore 2.3 Mac OS X (10.4.6)

  • RELEVANCY SCORE 2.31

    DB:2.31:Evolution Hogging System Resources dk



    This has happened to me before - evolution suddenly started using at least 50% of cpu, sometimes %100, also Xorg jumps right up there too if evolution is running. Previously I fixed this problem by disabling sync with google calendar in gnome3 online accounts. Now its back, I havent reenabled calendar syncing either. Evolution was fine this morning, but not this afternoon. The only thing I can think of is I logged into my google calendar account and enabled a calendar. But that was yesterday and evolution was working fine this morning.

    In online accounts everything is disabled except for mail. I have relogged into google calendar from a web browser and turned off all calendars... I am not sure where I should look next. I know there was a bug with evolution and google calendar, but maybe I am looking in the wrong place?

    Thanks!

    DB:2.31:Evolution Hogging System Resources dk


    This has happened to me before - evolution suddenly started using at least 50% of cpu, sometimes %100, also Xorg jumps right up there too if evolution is running. Previously I fixed this problem by disabling sync with google calendar in gnome3 online accounts. Now its back, I havent reenabled calendar syncing either. Evolution was fine this morning, but not this afternoon. The only thing I can think of is I logged into my google calendar account and enabled a calendar. But that was yesterday and evolution was working fine this morning.

    In online accounts everything is disabled except for mail. I have relogged into google calendar from a web browser and turned off all calendars... I am not sure where I should look next. I know there was a bug with evolution and google calendar, but maybe I am looking in the wrong place?

    Thanks!

  • RELEVANCY SCORE 2.31

    DB:2.31:Logic Pro Freezing Everytime I Click Save 93


    Hi, my logic pro is recently freezing everytime I click save, save as, or do the command for saving. Also, before the spinning rainbow wheel appears, the screen flashes white. Not sure if anything is tied in with that. I can't even run logic/my projects anymore and I am extremely confused because I have an upgraded MacPro and it is a brand new computer..

    DB:2.31:Logic Pro Freezing Everytime I Click Save 93

    Hi, my logic pro is recently freezing everytime I click save, save as, or do the command for saving. Also, before the spinning rainbow wheel appears, the screen flashes white. Not sure if anything is tied in with that. I can't even run logic/my projects anymore and I am extremely confused because I have an upgraded MacPro and it is a brand new computer..

  • RELEVANCY SCORE 2.30

    DB:2.30:[Solved] Evolution 3.4.1 Birthdays Anniversaries Not Showing fk



    Hi there,

    after upgrade to Linux 3.3.3-1-ARCH, Gnome 3.4.1 and Evolution 3.4.1, the new Evolution client does not show any Birthdays Anniversaries in the calendar anymore. Neither in the Evolution calendar nor in the Gnome Date and Time calendar overview (top of screen). Running is evolution, evolution-addressbook-factory, evolution-calendar-factory and evolution-alarm-notify. It worked fine in the previous version of Evolution 3.2.x. Maybe it is not an Arch, but an Evolution issue; but a quick search at Gnome Bugzilla did not bring up anything. However, anyone else with this problem (or with a solution)? I do not want to get into too much trouble by missing many birthdays

    Best regards,

    christoph

    Last edited by roepi (2012-06-20 08:17:37)

    DB:2.30:[Solved] Evolution 3.4.1 Birthdays Anniversaries Not Showing fk


    What if a person wants to disable or remove the Birthdays and Anniversaries calendar entirely, is this possible as well?

  • RELEVANCY SCORE 2.30

    DB:2.30:Evolution Crashing Under Kde With Seg Fault zm



    Dear Arch community,

    Im now with Arch and here is my problem:

    I just installed Evolution and gtk3 package under KDE (both are at their latest versions). Running evolution and selecting an email inbox results in a seg fault:

    ...(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion GDK_IS_PIXBUF (pixbuf) failed(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion GDK_IS_PIXBUF (pixbuf) failed(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_rowstride: assertion GDK_IS_PIXBUF (pixbuf) failed(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_n_channels: assertion GDK_IS_PIXBUF (pixbuf) failedSegmentation fault (core dumped)

    using gdb i got this stacktrace:

    #0 0x00007ffff3515fa0 in gdk_cairo_surface_create_from_pixbuf () from /usr/lib/libgdk-3.so.0#1 0x00007ffff35160c3 in gdk_cairo_set_source_pixbuf () from /usr/lib/libgdk-3.so.0#2 0x00007ffff786819c in ?? () from /usr/lib/evolution/3.10/libevolution-util.so#3 0x00007ffff786a504 in e_cell_draw () from /usr/lib/evolution/3.10/libevolution-util.so#4 0x00007ffff78e5e9c in ?? () from /usr/lib/evolution/3.10/libevolution-util.so#5 0x00007ffff309e89a in ?? () from /usr/lib/evolution/3.10/libgnomecanvas.so#6 0x00007ffff30a0cf9 in ?? () from /usr/lib/evolution/3.10/libgnomecanvas.so...

    I tried with with a fresh user profile and same result.My question is how to deal with problem? Evolution is the only client to deal with Outlook Servers properly, so I depend on it. So I cant wait for the developers to fix this bug. Googling for it returned nothing, so it seems Im the only one having this problem. Do you have any ideas how to deal with this?

    Thanks, Thorsten

    DB:2.30:Evolution Crashing Under Kde With Seg Fault zm


    Dear Arch community,

    Im now with Arch and here is my problem:

    I just installed Evolution and gtk3 package under KDE (both are at their latest versions). Running evolution and selecting an email inbox results in a seg fault:

    ...(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_height: assertion GDK_IS_PIXBUF (pixbuf) failed(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_pixels: assertion GDK_IS_PIXBUF (pixbuf) failed(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_rowstride: assertion GDK_IS_PIXBUF (pixbuf) failed(evolution:21594): GdkPixbuf-CRITICAL **: gdk_pixbuf_get_n_channels: assertion GDK_IS_PIXBUF (pixbuf) failedSegmentation fault (core dumped)

    using gdb i got this stacktrace:

    #0 0x00007ffff3515fa0 in gdk_cairo_surface_create_from_pixbuf () from /usr/lib/libgdk-3.so.0#1 0x00007ffff35160c3 in gdk_cairo_set_source_pixbuf () from /usr/lib/libgdk-3.so.0#2 0x00007ffff786819c in ?? () from /usr/lib/evolution/3.10/libevolution-util.so#3 0x00007ffff786a504 in e_cell_draw () from /usr/lib/evolution/3.10/libevolution-util.so#4 0x00007ffff78e5e9c in ?? () from /usr/lib/evolution/3.10/libevolution-util.so#5 0x00007ffff309e89a in ?? () from /usr/lib/evolution/3.10/libgnomecanvas.so#6 0x00007ffff30a0cf9 in ?? () from /usr/lib/evolution/3.10/libgnomecanvas.so...

    I tried with with a fresh user profile and same result.My question is how to deal with problem? Evolution is the only client to deal with Outlook Servers properly, so I depend on it. So I cant wait for the developers to fix this bug. Googling for it returned nothing, so it seems Im the only one having this problem. Do you have any ideas how to deal with this?

    Thanks, Thorsten

  • RELEVANCY SCORE 2.30

    DB:2.30:[Solved] Evolution :: Not Able To Send Email 8k



    HI

    It was working before, but now I am not able to send email over work {office} smtp server.

    I have two accounts in Evolution, work and personal. For personal I am using my own debian server with postfix and I can send email over that.I did contact hosting company who we are using for work smtp server and they are saying that there is no incaming connection for my acount in time when I am trying to send email.

    I did install Thunderbird, wow, I can send email from work and personal account and with same configuration as evolution, port 25 with and without security (TLS).

    I think it is cleary problem of evolution, can someone explain me what could happen? Friend visit me today, He is using Evolution too, but he is running MINT, same problem.

    thanks for comments

    Last edited by jancici (2012-02-03 08:16:48)

    DB:2.30:[Solved] Evolution :: Not Able To Send Email 8k


    Thanks, I was trying to check trafic on router, and I did not see where the problem is, well I did not check IP.

    Now, tcpdump show me the problem. I am using OPENDNS and here is output from tcpdump:
    08:52:14.287372 IP frodo.49219 hit-nxdomain.opendns.com.smtp: Flags [s], seq 1810390044, win 14600, options [mss 1460,sackOK,TS val 34963370 ecr 0,nop,wscale 6], length 0
    E..#.@.@.|...TdC.A..C..k.\.......9............
    ............
    08:52:15.288964 IP frodo.49219 hit-nxdomain.opendns.com.smtp: Flags [s], seq 1810390044, win 14600, options [mss 1460,sackOK,TS val 34963671 ecr 0,nop,wscale 6], length 0
    E..#.@.@.|...TdC.A..C..k.\.......9............
    ............
    08:52:17.292307 IP frodo.49219 hit-nxdomain.opendns.com.smtp: Flags [s], seq 1810390044, win 14600, options [mss 1460,sackOK,TS val 34964272 ecr 0,nop,wscale 6], length 0
    E..#.@.@.|...TdC.A..C..k.\.......9............

  • RELEVANCY SCORE 2.29

    DB:2.29:How Can I Use My Uc-33e As A Drawbar Controller For Evb3 In Mainstage? 9m


    Hi,

    I am a complete noob when it comes to Mainstage. I've been using Logic for close to a year now with relatively few problems, but I am stumped when it comes to MS, for a couple of issues anyway. Here's one:

    I use various software B3 emulations - EVB3, B4 and VB3. I use my Evolution UC-33e controller as the drawbars controller. I use this in Logic with no problem, took me a minute or two to figure how to set up the EVB3 but it all works great - in Logic.

    I was thinking that MS was basically Logic minus the recording and sequencing, but as for now that doesn't appear to be the case. I have my keyboard and the UC-33e both transmitting on Ch 1. When I call up the Jazz Organ patch (for example), I can still go into EVB3 and set it to recognize the NI controller set (which is what the UC-33e transmits), but when I move the drawbar controllers I will get patch changes, parameter changes, but nothing relating to the EVB3. I can go into layout mode and get the Drive control to work, as 'Distort Drive' is one of the parameters that are available on the layout for this patch, so I know it can work.

    Do I have to create a new layout that contains the controllers on UC-33e? I want to at least be able to use the drawbars, Leslie fast/slow, volume drive.

    I'm also curious to know why this setup works with no problems in Logic but not in MS. I have 3 weeks to get MS set up correctly, but if I'm still having trouble in a week I'll just use Logic - I know that will work!

    -Doug

    DB:2.29:How Can I Use My Uc-33e As A Drawbar Controller For Evb3 In Mainstage? 9m

    You have to create slider controllers for your UC-33e in Layout mode and learn the controller #s. Same with volume (expression pedal). You can toggle leslie slow/fast/brake w/mod wheel. There are some other posts on configuring this so check those out. I use my Axiom-61 sliders for drawbar settings and it works fine.

  • RELEVANCY SCORE 2.29

    DB:2.29:Evolution Criteria 79



    Hi Communtiy,we are going to develop new web application Using JSF and facelets.But for rich Client application we are in dilema to select which framewrok is good.So we have followed some Evolution Criteria I mean Selection Criteria for Frameworks choose ,those areRun-time performance,Developer productivity-Config,debugging,maintenance,version upgardes,component library compatibility,Flexible Validation Logic Error Presentation,Exception Handling Mechanism,IDE supportSo please Can U help to find out the comaparison of these points regarding RichFaces with other frameworks like IceFaces1.8 and ZK.And also suuggest any other pros are there for RichFaces over others.ThanksUday

    DB:2.29:Evolution Criteria 79


    Hi,I guess it might be useful in decision, UI framework:http://www.jsfmatrix.net/(However I'm not sure whether which all frameworks can be integrated with Seams).

  • RELEVANCY SCORE 2.28

    DB:2.28:[Solved] Evolution Problem With Google-Calendar d7



    Hi everybody.

    I woke up today (as any other day) and tried to Sync my Google Calendars with Evolution in GNOME, but... nothing happened. I cant create new events (from Evolution) and when i try to sync them, shows this error in the console:

    (evolution:15259): e-data-server-ui-WARNING **: Keyring key is unusable: no user or host namelibgdata-Message: Unhandled XML in GDataCalendarCalendar: gd:where valueString=Bogotá/libgdata-Message: Unhandled XML in GDataCalendarCalendar: gd:where valueString=Bogotá/

    What do you guys think it could be?

    Thanks in advance,Jaime

    EDIT:Both updating GNUTLS to the 3.0.18 version or upgrading Evolution solved the problem.

    Last edited by japenagosc (2012-04-24 14:13:48)

    DB:2.28:[Solved] Evolution Problem With Google-Calendar d7


    In my case problem is solved with update to Evolution 3.4.1

  • RELEVANCY SCORE 2.28

    DB:2.28:Time Machine Stuck After "Ownership Is Disabled..." dm


    Hi,I have a problem with Time Machine + Time Capsule on my Mac Pro.1 week ago all was working properly, but now I'm not able anymore the complete the initial backup.Here is what I have in the log :04/10/13 11:23:54,018 com.apple.backupd[1696]: Starting automatic backup04/10/13 11:23:54,038 com.apple.backupd[1696]: Attempting to mount network destination URL: afp://jocelyn%20fournier;AUTH=SRP@Time-Capsule-Lia-Joce.local/Time%20Capsule%20 Lia%20_%20Joce04/10/13 11:23:54,486 com.apple.backupd[1696]: Mounted network destination at mount point: /Volumes/Time Capsule Lia _ Joce using URL: afp://jocelyn%20fournier;AUTH=SRP@Time-Capsule-Lia-Joce.local/Time%20Capsule%20 Lia%20_%20Joce04/10/13 11:23:58,111 com.apple.backupd[1696]: User continued after being warned of changed destination volume identity04/10/13 11:23:58,128 com.apple.backupd[1696]: Creating disk image /Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle04/10/13 11:24:34,198 com.apple.backupd[1696]: Failed to hide extension on /Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle, error: Error Domain=NSCocoaErrorDomain Code=4 "The file Mac Pro de jocelyn fournier.sparsebundle doesnt exist." UserInfo=0x7fbb91c1a2f0 {NSURL=file://localhost/Volumes/Time%20Capsule%20Lia%20_%20Joce/Mac%20Pro%20de% 20jocelyn%20fournier.sparsebundle/, NSFilePath=/Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle, NSUnderlyingError=0x7fbb91c19970 "The operation couldnt be completed. No such file or directory"}.04/10/13 11:24:40,606 com.apple.backupd[1696]: Disk image /Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle mounted at: /Volumes/Copies de sauvegarde Time machine04/10/13 11:24:40,611 com.apple.backupd[1696]: Backing up to: /Volumes/Copies de sauvegarde Time machine/Backups.backupdb04/10/13 11:24:40,616 com.apple.backupd[1696]: Ownership is disabled on the backup destination volume. Enabling.Nothing is happening after this point, and Time Machine is stuck in the state 'Preparing backup...'The time capsule is connected directly through ethernet.I've tried the same setup on an iMac, and all is working perfectly, so I assume there's somework wrong on the Mac Pro.Here's what I have already tried :- Reformat the time capsule- Fix permission on the Mac Pro- Start the mac pro in Safe mode- Let the time capsule alone on the ethernet port (wifi is disabled)- Changing the name of the time capsule partition- Reselecting the time capsule through the 'choose disk' button- Enabling / Disabling trim on my main SSD diskHere is what I can see on the time capsule :-rwxrwxrwx@ 1 root wheel 0 4 oct 10:26 .com.apple.timemachine.supporteddrwxrwxrwx@ 1 root wheel 264 4 oct 11:44 Mac Pro de jocelyn fournier.sparsebundledrwxrwxrwx@ 1 root wheel 264 4 oct 11:44 iMac de Jocelyn.sparsebundledrwxrwxrwx@ 1 root wheel 264 4 oct 11:44 .drwx------ 1 root wheel 264 4 oct 11:24 ..-rwxrwxrwx 1 root wheel 500 4 oct 11:23 Info.bckup-rwxrwxrwx 1 root wheel 500 4 oct 11:23 Info.plistdrwxrwxrwx 1 root wheel 3730 4 oct 11:43 bands-rwxrwxrwx 1 root wheel 445 4 oct 11:24 com.apple.TimeMachine.MachineID.bckup-rwxrwxrwx 1 root wheel 445 4 oct 11:24 com.apple.TimeMachine.MachineID.plist-rwxrwxrwx 1 root wheel 0 4 oct 11:23 token[root@Mac-Pro-de-jocelyn-fournier] /Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle/bands ltotal 1705048drwxrwxrwx 1 root wheel 3730 4 oct 11:43 .drwxrwxrwx@ 1 root wheel 264 4 oct 11:44 ..-rwxrwxrwx 1 root wheel 3264512 4 oct 11:23 0-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 19-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1a-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1b-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1c-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1c9-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1ca-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1cb-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1cc-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1cd-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1ce-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1cf-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d0-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d1-rwxrwxrwx 1 root wheel 4775936 4 oct 11:23 1d145-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d2-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d3-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d4-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d5-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d6-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d7-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d8-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1d9-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1da-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1db-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1dc-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1dd-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1de-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1df-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e0-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e1-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e2-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e3-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e4-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e5-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e6-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e7-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e8-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1e9-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1ea-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1eb-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1ec-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1ed-rwxrwxrwx 1 root wheel 184320 4 oct 11:24 1ee-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 1f-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 20-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 21-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 22-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 23-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 24-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 25-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 26-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 27-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 28-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 29-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 2a-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 2b-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 2c-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 2d-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 2e-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 2f-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 30-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 31-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 32-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 33-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 34-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 35-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 36-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 37-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 38-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 39-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 3a-rwxrwxrwx 1 root wheel 8388608 4 oct 11:23 3a271-rwxrwxrwx 1 root wheel 1077248 4 oct 11:24 3a272-rwxrwxrwx 1 root wheel 1097728 4 oct 11:23 3a282-rwxrwxrwx 1 root wheel 24576 4 oct 11:24 3a9-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 3b-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 3c-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 3d-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 3e-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 3f-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 40-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 41-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 42-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 43-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 44-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 45-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 46-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 47-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 48-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 49-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 4a-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 4b-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 4c-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 4d-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 4e-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 4f-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 50-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 51-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 52-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 53-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 54-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 55-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 56-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 57-rwxrwxrwx 1 root wheel 8388608 4 oct 11:24 58-rwxrwxrwx 1 root wheel 6475776 4 oct 11:24 59And the mounted backup :[root@Mac-Pro-de-jocelyn-fournier] /Volumes/Copies de sauvegarde Time machine l 11:48:15total 0drwxr-xr-x 4 root wheel 272 4 oct 11:24 .drwxrwxrwt@ 10 root admin 340 4 oct 11:39 ..d-wx-wx-wt@ 2 _unknown _unknown 68 4 oct 11:24 .Trashesdrwx------ 2 _unknown _unknown 102 4 oct 11:24 .fseventsdAny clues of what could be wrong here ?(the mounting seems really strange to me, especially the ownership)Thanks, Jocelyn

    DB:2.28:Time Machine Stuck After "Ownership Is Disabled..." dm

    Actually this is quite annoying, for the incremental backup, I have to manually quit mds to unblock the backup...05/10/13 02:35:01,870 com.apple.backupd[2263]: Starting automatic backup05/10/13 02:35:01,897 com.apple.backupd[2263]: Network destination already mounted at: /Volumes/Time Capsule Lia _ Joce05/10/13 02:35:04,717 com.apple.backupd[2263]: Disk image already attached: /Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle, DIHLDiskImageAttach returned: 3505/10/13 02:35:06,144 com.apple.backupd[2263]: Disk image /Volumes/Time Capsule Lia _ Joce/Mac Pro de jocelyn fournier.sparsebundle mounted at: /Volumes/Time Machine Backups05/10/13 02:35:06,145 com.apple.backupd[2263]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb05/10/13 02:36:41,366 com.apple.backupd[2263]: Waiting for Spotlight to finish indexing /Volumes/Time Machine Backups/Backups.backupdb05/10/13 02:43:50,453 com.apple.backupd[2263]: Waiting for Spotlight to finish indexing /Volumes/Time Machine Backups/Backups.backupdb= here I kill mds05/10/13 10:57:06,493 com.apple.backupd[2263]: Using file event preflight for SSD05/10/13 10:57:22,008 com.apple.backupd[2263]: Will copy (3.6 MB) from SSD05/10/13 10:57:22,026 com.apple.backupd[2263]: Using file event preflight for Macintosh HD05/10/13 10:57:22,051 com.apple.backupd[2263]: Will copy (Zero KB) from Macintosh HD05/10/13 10:57:22,052 com.apple.backupd[2263]: Found 690 files (3.6 MB) needing backup05/10/13 10:57:22,076 com.apple.backupd[2263]: 5.55 GB required (including padding), 1.53 TB available

  • RELEVANCY SCORE 2.28

    DB:2.28:Gnome 3 - Evolution - High Cpu Usage jx



    I have a problem with evolution 3. As soon as I have it opened, X takes 100% cpu and evolution 49%, is anyone having the same problem or anyone knows how to solve this?

    Thanks.

    DB:2.28:Gnome 3 - Evolution - High Cpu Usage jx

    niqingliang2003 wrote:
    my evolution always crash

  • RELEVANCY SCORE 2.28

    DB:2.28:Pro Evolution Soccer 2012 On Y570 x9


    Hello!I have a Lenovo Y570 with i3. I tried to play PES 2012 but it stuttered a lot.i tried a bunch of WHQL and beta drivers, D3D overrider, nvidia inspector etc... It's still not OK. Does anybody have solution for this problem?Sorry for my bad English.

    DB:2.28:Pro Evolution Soccer 2012 On Y570 x9

    Hi ktommy91

    Try change to High Performance power plan under Control Panel, Power Options.

    When you are playing PES2012, when does it stuttered? Beginning of the game, or after minutes? After minutes or hours of playing, does your machine heats up badly? (left side, near fan vent)

    Have a nice day!
    Peter
    W520 (4284-A99)
    Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
    =====================================
    Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
    http://forums.lenovo.com/t5/General-Discussion/Dol​by-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/6...
    http://forums.lenovo.com/t5/IdeaPad-Slate-Tablets/​IdeaPad-Tablet-Sound-Enhancement-Thread/td-p/715

  • RELEVANCY SCORE 2.28

    DB:2.28:Evolution Imap Not Working? df



    Hi,

    Archlinux gets updated every two or three days on my laptop. Since 27 april 2011 I didnt use evolution, so I guess I have updated the system a few times. Yesterday I was not able to check my imap-mail from evolution - also sending an email through SMTP did not succeed. Checking it with thunderbird went perfectly, as well as sending that email through SMTP.

    Anyone else having the same problem? In what logfile does evolution/gnome output its errors, so I can submit a bugreport...

    DB:2.28:Evolution Imap Not Working? df


    Hi,

    Archlinux gets updated every two or three days on my laptop. Since 27 april 2011 I didnt use evolution, so I guess I have updated the system a few times. Yesterday I was not able to check my imap-mail from evolution - also sending an email through SMTP did not succeed. Checking it with thunderbird went perfectly, as well as sending that email through SMTP.

    Anyone else having the same problem? In what logfile does evolution/gnome output its errors, so I can submit a bugreport...

  • RELEVANCY SCORE 2.28

    DB:2.28:Microsoft Photo Viewer Not Reacting To Wheel No Zoom With Microsoft Wireless Laser Mouse 6000. cm


    On Win7-64 I found no wheel zooming working (no reaction).
    As other apps work with wheel zoom, I thought the feature was removed. But by chance I found spinning the wheel very fast gives a "jump" zoom.
    "http://www.sevenforums.com/drivers/11562-microsoft-lazer-mice-scroll-wheel-problems-vista-w7.html" mentions the problem as well.
    Is there an official solution which works with current IntelliPoint software?

  • RELEVANCY SCORE 2.28

    DB:2.28:[Workaround Found] Evolution Wont Authenticate On Smtp pf



    Hi there,

    since the gnome update yesterday, evolution wont use any SMTP auth when sending emails. This basically means I cannot send emails with evolution. Anyone else having the same problem?

    Cheers,acidicX

    Last edited by acidicX (2014-10-19 13:00:49)

    DB:2.28:[Workaround Found] Evolution Wont Authenticate On Smtp pf


    It is bit strangeI have new PC so I have fresh instalation of evolution and this is not a problem. I can send email over smtp with SSL and encrupted pass.On old PC I have still problem with sending, I need to use smtp without SSL.

    any idea?

  • RELEVANCY SCORE 2.27

    DB:2.27:How Do I Handle This Scenario? j7



    Scenario:- Parallel development with multiple teams. Database schema is evolving / may evolve.Question:- How to reduce dependency impact on development teamsIntent:-
    Make distinction between process logic (slsb ejb) and domain logic (belongs in model classes that are persistent). Model classes are affected due to DB schema evolution/changes.

    DB:2.27:How Do I Handle This Scenario? j7


    Scenario:- Parallel development with multiple teams. Database schema is evolving / may evolve.Question:- How to reduce dependency impact on development teamsIntent:-
    Make distinction between process logic (slsb ejb) and domain logic (belongs in model classes that are persistent). Model classes are affected due to DB schema evolution/changes.

  • RELEVANCY SCORE 2.27

    DB:2.27:Weird .Wav Problem - Only Some Will Work 1z


    I've got a bunch of Zero-G sample libraries, but have major problems with three (Celtic, eVolution and Seismic Frequencies).

    The problem is that some of the .wav samples in each of these packs work absolutely fine with Logic - I can drag them into the Media browser and it views them with all my other Apple loops and audio samples.

    However, there are others which don't - Logic simply won't import them, whatever I try. If I try to drag them on to the media browser, the familiar plus-in-a-green-circle doesn't appear and it won't import them any other way either.

    There doesn't seem to be any recognisable difference (such as length of file name, etc) between those that work and those that don't - it's got me absolutely stumped.

    I've tried refreshing the library and all sorts, but nothing will change the fact that Logic imports some of the .wav files OK but not others.

    I have tried contacting ZeroG about this, with no luck so far.

    Has anyone else had a similar problem and/or can make any suggestions, please?

    DB:2.27:Weird .Wav Problem - Only Some Will Work 1z

    I have done some more tests and this is the situation:

    The .wav files which are causing the problems play fine in Quicktime Player, they will play if you preview them by hitting the space bar and you can import them into Waveburner OK.

    In Logic, they also work fine if you drag them to the Arrange Window. However... you cannot import them directly to the Loops media browser window.

    However... if you drag them to the Arrange window first, and THEN to the media browser window, the Loops media browser will then import them OK!

    So the problem has to be something about those particular .wav files and the Apple Loops media browser, which dragging them to the Arrange window first fixes.

    It's very strange and, once again, all ideas and suggestions would be very welcome. I'd rather not have to drag every single one to the Arrange window first as there are so many.

  • RELEVANCY SCORE 2.27

    DB:2.27:Thread: Groupwise 7 Po And Evolution Client Problems xm


    I am not sure if this is a question for the Groupwise community or Evolution

    folks but since this list is a lot more active than the Evolution one I

    figured I would take a shot here first. Thanks in advance for any help.

    We have Groupwise 7 on a post office here (netware) and I am running a SUSE

    10 laptop with Evolution 2.4 as my primary workstation. I started out

    really liking the Evolution/Groupwise integration. But after a few days I

    noticed that the network traffic on my laptop was constantly hovering at

    around 120-150k/sec. After further investigation I found that it was

    traffic between my workstation and the Groupwise Post office. I did a

    packet capture on my local machine and saw that it was tons of SOAP port

    traffic. Looking closer at the packets I found that it was addressbook sync

    traffic and specifically it was Evolution Data Server trying to sync like

    4-5 addressbook entries with the Groupwise addressbook over and over again.

    The same entries constantly. So Rcon\'d into the post office and found that

    while this was going on it was eating up on average about 20% of the

    server\'s cpu cycles. If I killed Evolution on my workstation the server\'s

    avg cpu utilization would settle down to a normal level.

    I can recreate this problem at will. And on multiple machines. Another

    Suse10 laptop in my office is doing the exact same thing. Recently I

    upgraded to Evolution 2.4.1 but this has not resolved the problem.

    Evolution will run fine as long as I do not try to do anything that

    involves touching the Groupwise Addressbook. As soon as Evolution

    auto-completes an address for me in a new message, or as soon as I manually

    search the addressbook under the contacts tab in Evolution the network

    traffic begins and does not stop until I kill Evolution. I think I am going

    to try setting the visibility of those 4-5 addressbook entries to none

    temporarily to see if that resolves the problem. But I was wondering if

    anyone else had ever seen anything like this before.

    Thanks

    DB:2.27:Thread: Groupwise 7 Po And Evolution Client Problems xm

    You are probably best taking this to the evolution list. The evolution-gw

    connector is not officially supported by Novell.

    -' + '-

    Michael J. Bell

    Novell Support Connection Volunteer Sysop

    Author of Guinevere (http://www.openhandhome.com)

    PLEASE: Do not e-mail me privately unless specifically asked.

    I\'m a volunteer, not a Novell employee!

    All opinions and advice provided are MINE alone and NOT Novell\'s unless

    specifically identified as such.

    Novell does not officially monitor these forums.

    Enhancement requests for all Novell products may be made at

    http://support.novell.com/enhancement

    You\'ve got a way to keep me on your side/You give me cause

    for love that I can\'t hide/For you I know I\'d even try to

    turn the tide/Because you\'re mine, I walk the line

    Johnny Cash (RIP)

    Kennon Keoseyan kkeoseyan@co.tulare.ca.us wrote in message

    news:F6Yuf.6287$012.3120@prv-forum2.provo.novell.com...

    I am not sure if this is a question for the Groupwise community or

    Evolution

    folks but since this list is a lot more active than the Evolution one I

    figured I would take a shot here first. Thanks in advance for any help.

    We have Groupwise 7 on a post office here (netware) and I am running a

    SUSE

    10 laptop with Evolution 2.4 as my primary workstation. I started out

    really liking the Evolution/Groupwise integration. But after a few days I

    noticed that the network traffic on my laptop was constantly hovering at

    around 120-150k/sec. After further investigation I found that it was

    traffic between my workstation and the Groupwise Post office. I did a

    packet capture on my local machine and saw that it was tons of SOAP port

    traffic. Looking closer at the packets I found that it was addressbook

    sync

    traffic and specifically it was Evolution Data Server trying to sync like

    4-5 addressbook entries with the Groupwise addressbook over and over

    again.

    The same entries constantly. So Rcon\'d into the post office and found that

    while this was going on it was eating up on average about 20% of the

    server\'s cpu cycles. If I killed Evolution on my workstation the server\'s

    avg cpu utilization would settle down to a normal level.

    I can recreate this problem at will. And on multiple machines. Another

    Suse10 laptop in my office is doing the exact same thing. Recently I

    upgraded to Evolution 2.4.1 but this has not resolved the problem.

    Evolution will run fine as long as I do not try to do anything that

    involves touching the Groupwise Addressbook. As soon as Evolution

    auto-completes an address for me in a new message, or as soon as I

    manually

    search the addressbook under the contacts tab in Evolution the network

    traffic begins and does not stop until I kill Evolution. I think I am

    going

    to try setting the visibility of those 4-5 addressbook entries to none

    temporarily to see if that resolves the problem. But I was wondering if

    anyone else had ever seen anything like this before.

    Thanks

  • RELEVANCY SCORE 2.27

    DB:2.27:Will Not Finish Install 7m


    A bit frustrated. Logic x will not finish install. Interface appears to come up and ask for previous session. After which the ubiquitous spinning wheel. Have read other posts advising to install in safe mode but did not resolve the problem. Wondering if any other suggestions concerning MIDI drivers or the like interfering with and sell? Have been using logic nine many years now. Have never run into such a problem. Thanks for any help.

    DB:2.27:Will Not Finish Install 7m

    A bit frustrated. Logic x will not finish install. Interface appears to come up and ask for previous session. After which the ubiquitous spinning wheel. Have read other posts advising to install in safe mode but did not resolve the problem. Wondering if any other suggestions concerning MIDI drivers or the like interfering with and sell? Have been using logic nine many years now. Have never run into such a problem. Thanks for any help.

  • RELEVANCY SCORE 2.27

    DB:2.27:Why Cant I Sign In To Wheel Of Fortune As I Did With Qwest 3z



    I can't sign in to Wheel of Fortune as I did with my former ISP-Qwest. What is the problem?

    DB:2.27:Why Cant I Sign In To Wheel Of Fortune As I Did With Qwest 3z


    I can't sign in to Wheel of Fortune as I did with my former ISP-Qwest. What is the problem?

  • RELEVANCY SCORE 2.27

    DB:2.27:Spinning Wheel During Shut Down, Won't Respond 9z


    Help! iTouch is stuck on spinning wheel... had a problem with backup earlier in the day and now it won't respond at all.

    DB:2.27:Spinning Wheel During Shut Down, Won't Respond 9z

    Help! iTouch is stuck on spinning wheel... had a problem with backup earlier in the day and now it won't respond at all.

  • RELEVANCY SCORE 2.27

    DB:2.27:Using My Evolution Uc-33 With Logic 8 ss


    Hi all,

    Anyone know how to get my UC-33 to control elements of my Logic 8 environment. I am an Ableton Live user and that works perfectly. The scale of the two products (Live and Logic 8) are totally different I understand that. But I want to be able to dynamically assign the faders/pots/buttons on the UC-33 to areas of the Logic environment such as mixer etc or parameters of the soft synths that come with Logic. Its not very obvious to me. I am new to Logic but I am familiar with computer sequencers.

    DB:2.27:Using My Evolution Uc-33 With Logic 8 ss

    Hi all,

    Anyone know how to get my UC-33 to control elements of my Logic 8 environment. I am an Ableton Live user and that works perfectly. The scale of the two products (Live and Logic 8) are totally different I understand that. But I want to be able to dynamically assign the faders/pots/buttons on the UC-33 to areas of the Logic environment such as mixer etc or parameters of the soft synths that come with Logic. Its not very obvious to me. I am new to Logic but I am familiar with computer sequencers.

  • RELEVANCY SCORE 2.27

    DB:2.27:Logic Requests Midi Control Data 1d


    Hi
    I am having a problem when using my evolution MK-249C controller keyboard with logic.
    Every time I switch the keyboard on or wake my imac from sleep with the keyboard attached and switched on, logic receives controller positions for the current position of all the knobs on the keyboard, thereby adjusting all the onscreen parameters and basically stuffing my project.

    I am not sure if logic is requesting a snapshot when it detects a device being re-connected or whether the controller just sends them all out whenever it is switched on.
    It seems to be a logic thing, as "Live" or "Traktor" do not display this behavior.

    Any ideas?

    Many thanks
    Bluey

    DB:2.27:Logic Requests Midi Control Data 1d

    Hi
    I am having a problem when using my evolution MK-249C controller keyboard with logic.
    Every time I switch the keyboard on or wake my imac from sleep with the keyboard attached and switched on, logic receives controller positions for the current position of all the knobs on the keyboard, thereby adjusting all the onscreen parameters and basically stuffing my project.

    I am not sure if logic is requesting a snapshot when it detects a device being re-connected or whether the controller just sends them all out whenever it is switched on.
    It seems to be a logic thing, as "Live" or "Traktor" do not display this behavior.

    Any ideas?

    Many thanks
    Bluey

  • RELEVANCY SCORE 2.26

    DB:2.26:Logic Topdrive Gt4 Steering Wheel Not Working With Ps3 k3



    Okay, I have searched and read threads and none are specific to this wheel...

    I got given this as a free gift, the Logic3 Topdrive GT4 steering wheel. It only had PS2/XBox/GameCube ports so i bought the Logic3 convertor for the PS3 and I tried it and it works fine with a PS2 controller. Its has the lights to tell you which controller etc you are.

    When i plug my wheel into the port convertor it doesn't work but does with a normal controller, what am i doing wrong here?

    Trying to play Burnout Paradise with it.

    Any help?

    DB:2.26:Logic Topdrive Gt4 Steering Wheel Not Working With Ps3 k3


    Okay, I have searched and read threads and none are specific to this wheel...

    I got given this as a free gift, the Logic3 Topdrive GT4 steering wheel. It only had PS2/XBox/GameCube ports so i bought the Logic3 convertor for the PS3 and I tried it and it works fine with a PS2 controller. Its has the lights to tell you which controller etc you are.

    When i plug my wheel into the port convertor it doesn't work but does with a normal controller, what am i doing wrong here?

    Trying to play Burnout Paradise with it.

    Any help?

  • RELEVANCY SCORE 2.26

    DB:2.26:Assassins Creed 2 Item Wheel Problem f9



    Everytime I pause the game or try losing it, the item wheel opens up and i can't get it to go away. Is this a problem with the game, counsle or my controller?







    Solved!
    Go to solution

    DB:2.26:Assassins Creed 2 Item Wheel Problem f9


    You're welcome





    Best (Ex)Community Moderator: Wretched_Hawk

  • RELEVANCY SCORE 2.26

    DB:2.26:Garageband And Uc-33 z7


    Bonjour everybody,

    I've just bought a surface control (I think it's the English word) from Evolution : the UC-33e.
    I would like to know if and how it can work with Garageband or Logic Express (and even Final Cut Pro).
    Could someone knows ?
    Are there some templates ?
    Please, feel free to help me.
    Good bye from Paris

    PS : excuse my English, I'm desperatly French

    DB:2.26:Garageband And Uc-33 z7

    Thank you very much agin.
    I think I will try to learn more about Logic Express.
    Regards

  • RELEVANCY SCORE 2.26

    DB:2.26:[Solved] Evolution Upgrade Problem With Groupwise 99



    Hello,

    i upgraded evolution today and my account did not load and is not working. in the account settings i cannot select groupwise as my server type. when i run evolution i receive these errors:

    (evolution:1000): evolution-mail-WARNING **: e_mail_store_add_by_account: Failed to add transport service: No provider available for protocol groupwise

    (evolution:1000): evolution-mail-WARNING **: Couldnt get service: my_work@email.address: No provider available for protocol groupwise

  • RELEVANCY SCORE 2.26

    DB:2.26:N96 Nav Wheel Not Working!!! z7


    Is it me or has anyone else got a problem with the nav wheel feature??? been hanging on the phone with nokia care for 32 minutes and the music is awful!!

    DB:2.26:N96 Nav Wheel Not Working!!! z7

    YEP the feature is no longer there.

    So nothing we can do to bring it back I'm afraid




    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • RELEVANCY SCORE 2.26

    DB:2.26:Mouse Wheel Wont Scroll In Excel c3


    Just started having a problem with my Microsoft Wireless Laser Mouse 6000 v.2. I can't use the wheel the scroll through worksheets in Excel - worked fine before yesterday. The "wheel scrolling" works in other programs (Word, Outlook, etc.). Problem is
    limited to Excel - and to web pages in Internet Explorer.
    Any ideas?

    DB:2.26:Mouse Wheel Wont Scroll In Excel c3

    Turned out that the problem was a corrupted user file. By creating a new user file the problem was solved.

  • RELEVANCY SCORE 2.26

    DB:2.26:Parrot Ck3000 Evolution + Iphone, Problems?&Nbsp; Experience? k3


    Anybody else on the forum uses Parrot CK3000 Evolution bluetooth kit with their iphone?
    i had one installed last week, few things didn't work which is okay.... but sometime the phone won't auto connect to the kit. it connects 80% of the time.
    just want to see if anybody else out there using the same kit experience the similar problem, not sure if this is related to my installer or iphone

    DB:2.26:Parrot Ck3000 Evolution + Iphone, Problems?&Nbsp; Experience? k3

    I also have a Parrot CK3100 and would like to know if you have been able to download your iPhone phone book to the CK3100 in your car, prior to buying an iPhone.

    I have been told by Car Phone Warehouse locally that you can't.

  • RELEVANCY SCORE 2.26

    DB:2.26:Pitch Bend Not Working ka


    hi I have an evolution mk461c usb midi controller.
    when I play any software synth in logic 8 I can use the mod wheel (c23) and it works but the pitch bend (c22) doesnt. I can see midi data coming in on channel 22 but ut has no effect. any ideas?
    best tommy banana

    DB:2.26:Pitch Bend Not Working ka

    hi I have an evolution mk461c usb midi controller.
    when I play any software synth in logic 8 I can use the mod wheel (c23) and it works but the pitch bend (c22) doesnt. I can see midi data coming in on channel 22 but ut has no effect. any ideas?
    best tommy banana

  • RELEVANCY SCORE 2.26

    DB:2.26:Mouse Wheel Capture c1


    i develouped a code for canvas like scrolling with x and y with mouse wheel support when i am left that canvas the mouse wheel is not working on it untill i click on the canvas how to rectify this problem please .....

    DB:2.26:Mouse Wheel Capture c1

    I'm not sure why you need to click, is there any event code hooked up to the canvas's click event? Here is a link to a scaled down example of using the mouse wheel. It supports IE and Firefox. It also calculates the vertical and horizontal scroll positions
    of the page.
    http://www.realtimesilverlight.com/RTLMouseWheelCapture/RTLMouseWheelCapture.aspx
    --- Ken

  • RELEVANCY SCORE 2.26

    DB:2.26:Problem With Driving Force Gt Wheel 1c



    Having loaded GT5, I connected my wheel to my PS3. All the buttons on the wheel and both pedals work fine but there is no steering!

    I connected the wheel to my PC and ran the Logitech software - the light in the centre of the wheel came on and the wheel spun during calibration after which there was resistance when turning the wheel.

    Re-connected the wheel to the PS3 but again everything except steering.

    Can anyone suggest what I have missed please?

    Many thanks







    Solved!
    Go to solution

    DB:2.26:Problem With Driving Force Gt Wheel 1c


    Er... look at the post above yours. He fixed it.




  • RELEVANCY SCORE 2.26

    DB:2.26:Evolution Loses Configuration After Every Desktop Logoff p9



    Anyone having this issue and have any suggestions to clear this up.

    Each time I loggoff my desktop, using XFCE but happens with KDE, Gnome, evolution dumps its configuration. So, each time I start Evolution, I am prompted to configure my email accounts.

    Using Evolution 3.2.2

    Regards,Bruce.

    DB:2.26:Evolution Loses Configuration After Every Desktop Logoff p9


    Anyone having this issue and have any suggestions to clear this up.

    Each time I loggoff my desktop, using XFCE but happens with KDE, Gnome, evolution dumps its configuration. So, each time I start Evolution, I am prompted to configure my email accounts.

    Using Evolution 3.2.2

    Regards,Bruce.

  • RELEVANCY SCORE 2.26

    DB:2.26:Does Logic Recognize Gestures? Replace Mouse With Magic Trackpad? ks


    Can you replace your mouse with a trackpad? I use the wheel for zooming does logic recognize gestures?

    DB:2.26:Does Logic Recognize Gestures? Replace Mouse With Magic Trackpad? ks

    Is this computer dependant or hardware dependant? I am running an older Macbook Pro...

  • RELEVANCY SCORE 2.26

    DB:2.26:Evolution - Some Preferance Settings Greyed Out m9



    I have a problem, where I want to use some of the settings that come with Evolution, except some of them are greyed out.

    I took a screenshot to show exactly what I am talking about:

    Basically I want to make use of:Keep Signature above the original message on replying

    but I can not since it is greyed out. Do I have to compile my own Evolution to get rid of this problem?

    DB:2.26:Evolution - Some Preferance Settings Greyed Out m9


    Well I guess this is not going to happen then. Anyone have pointers where I can start looking? Google didnt return any usefull results to me at least.

  • RELEVANCY SCORE 2.26

    DB:2.26:Online Problem Withpro Evolution Soccer 08 ja



    i have just bought PES08 in used condition and i have found that i can not get online to play as the person who had the game before me already used the code to access the online play. he does not remeber the password so is there anyway i can get online with this game now

    thanks

    DB:2.26:Online Problem Withpro Evolution Soccer 08 ja


    I've heard that using the code locks the game to the 1st user - it might be wortha google though.

    The online is hit and miss. I've had hours of fun on it but sometimes lag ruins the game. The ball can suddenly teleport and goes from inside the opponents half to being at the feet of Henry just outside your own box and he's1v1 with the keeper......... And even when the lag's fine you'll find A LOT of players who only try and score from cut-backs.

    I've won about 60% of my games though and I'm finding that I'm going back to it again after a few months of other games.

    Yes it's not as good as it could have been but it's still better than FIFA!

  • RELEVANCY SCORE 2.26

    DB:2.26:Evolution Doesnt Send 9f



    Hi, I just installed my first Arch system (Nova). It was a bit of a challenege, but by reading the docs and this forum I was actually able to fix most issues to the point I now have a functional system. My one remaining problem is that Evolution wont send my mail, responding with a message:error while performing operation: MAIL FROM response error: command unrecognized:

    Im using Evolution to get my mail to and from POP3 account with my ISP. I tried to start Evolution from a terminal but I didnt get any other messages this way. Evolution works and will fetch my mail, just wont send it... Kmail does receive and send without any problems.

    BTW, is there any way of enabling spellchecking in this build?

    DB:2.26:Evolution Doesnt Send 9f


    After a long time with the problem and googling a little bit ive found the solution right here: http://www.linuxquestions.org/questions … genumber=1

    basically you have to delete all the comments and empty lines from your /etc/hosts file..

    works like a charm!!

    greets,

  • RELEVANCY SCORE 2.25

    DB:2.25:How To Control Vibrato And Vibrato Speed In Logic Instruments sa


    Anyone know? I'd like to do this especially with woodwinds and brass.... some patches have this on the modulation wheel and some don't...

    DB:2.25:How To Control Vibrato And Vibrato Speed In Logic Instruments sa

    Anyone know? I'd like to do this especially with woodwinds and brass.... some patches have this on the modulation wheel and some don't...

  • RELEVANCY SCORE 2.25

    DB:2.25:Controlling Logic With Evolution Uc-33 sx


    hi there. i work with logic express, basically, and i have an evolution uc33 controller. i have tried to configure making an environment but it was practically impossible to get what i want, or the environment concept is very difficult to me. maybe if i have a supported control surface....

    the fact is, i have downloaded a template from m-audio site that they recommend to use under logic pro and express, it works fine, but, when i am using this template i can not control midi out/in of the uc33, wich i also use as midi usb interface. that is, if i wanna mix audio tracks with the knobs and faders of the uc33, works ok, but if i wanna to use the midi capabilities of the uc33 it does not work.....

    any help or suggestion ??? thanks and greetings from barcelona.
    fernando.

    DB:2.25:Controlling Logic With Evolution Uc-33 sx

    hi there. i work with logic express, basically, and i have an evolution uc33 controller. i have tried to configure making an environment but it was practically impossible to get what i want, or the environment concept is very difficult to me. maybe if i have a supported control surface....

    the fact is, i have downloaded a template from m-audio site that they recommend to use under logic pro and express, it works fine, but, when i am using this template i can not control midi out/in of the uc33, wich i also use as midi usb interface. that is, if i wanna mix audio tracks with the knobs and faders of the uc33, works ok, but if i wanna to use the midi capabilities of the uc33 it does not work.....

    any help or suggestion ??? thanks and greetings from barcelona.
    fernando.

  • RELEVANCY SCORE 2.25

    DB:2.25:[Solved] Evolution-2.12.3-1-I686.Pkg.Tar.Gz Is Corrupted 9d



    There is one strange problem with evolution upgrading
    [root@ziggy zig]# pacman -Suy
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community 339.6K 1578.6K/s 00:00:00 [#####################] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...

    Targets: evolution-2.12.3-1

    Total Download Size: 47.62 MB

    Proceed with installation? [Y/n] y
    :: Retrieving packages from extra...
    evolution-2.12.3-1-i686 47.6M 2.4M/s 00:00:20 [#####################] 100%
    checking package integrity...
    :: File evolution-2.12.3-1-i686.pkg.tar.gz is corrupted. Do you want to delete it? [Y/n] y
    error: failed to commit transaction (corrupted package)
    file evolution-2.12.3-1-i686.pkg.tar.gz was corrupted (bad MD5 checksum)
    Errors occurred, no packages were upgraded.

    DB:2.25:[Solved] Evolution-2.12.3-1-I686.Pkg.Tar.Gz Is Corrupted 9d


    Ok. issue has been resolved auto magically within a week.

    Thanks for the help!

  • RELEVANCY SCORE 2.24

    DB:2.24:Installation Problem, 9.0 Installer Hangs After Entering Serial Number da


    I'm unable to install my new Logic Studio 9 upgrade. The installer is hanging after entering the seriel number (spinning color wheel overnight).

    Anybody else seen this?

    DB:2.24:Installation Problem, 9.0 Installer Hangs After Entering Serial Number da

    Thanks a million 45rpm. I had this exact same problem on my new Macbook Pro. Moved the files as you suggested and installation is now going smoothly.

  • RELEVANCY SCORE 2.24

    DB:2.24:Building Evolution 2.2.2 -- Errors z8



    Hi there,

    As Im having problems with Evolution and libgnomecanvas 2.10.1, Ive been trying to rebuild Evolution 2.2.2 using ABS. Unfortunately, I get the following error:
    configure: error: evolution requires pilot-link to have working UTF-8 conversion routines
    make: *** No targets specified and no makefile found. Stop.
    == ERROR: Build Failed. Aborting...

    DB:2.24:Building Evolution 2.2.2 -- Errors z8

    JGC wrote:
    Your bug has been solved with the release of libgnomecanvas 2.10.1-2.

    Seems our pilot-link package is a little bit broken, need to check gnome-pilot for that. About the -lnss3: change the PKGBUILD to use make LDFLAGS+=/opt/mozilla/lib/firefox, the evolution-data-server package has been compiled against nss-nspr itself, while youre trying to compile evolution against firefox libs, which means that LDFLAGS for firefox arent passed through correctly from evolution-data-server.

  • RELEVANCY SCORE 2.24

    DB:2.24:Gconf Error Evolution mc



    Hello.

    Its not breaking up evolution, but I get this irritating messages every time I start evolution.

    (evolution:4694): e-utils-WARNING **: GConf error: Type mismatch: Expected `string got `int for key /apps/evolution/shell/network_config/http_host

    (evolution:4694): e-utils-WARNING **: GConf error: Type mismatch: Expected `string got `int for key /apps/evolution/shell/network_config/authentication_user

    (evolution:4694): e-utils-WARNING **: GConf error: Type mismatch: Expected `string got `int for key /apps/evolution/shell/network_config/authentication_password

    Now Ive played with gconf-editor, changed values, googled and scanned fora, but couldnt find the right solution.

    Anybody a clue ?

    Thanks

  • RELEVANCY SCORE 2.24

    DB:2.24:Applications Using Dbus Crash On Gnome3.2 mz



    hey all,Im having troubles with dbus as an increasing number of applications depending on it crash, each one with the same error message. Heres the output of evolution, for instance:
    [kyoki@ashrigo ~]$ evolution

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()

    (evolution:1999): Pango-WARNING **: Invalid UTF-8 string passed to pango_layout_set_text()
    process 1999: arguments to dbus_message_iter_append_basic() were incorrect, assertion _dbus_check_is_valid_utf8 (*string_p) failed in file dbus-message.c line 2534.
    This is normally a bug in some application using the D-Bus library.
    D-Bus not built with -rdynamic so unable to print a backtrace
    Abgebrochen

    DB:2.24:Applications Using Dbus Crash On Gnome3.2 mz


    Me too. I had the same problem. Locale was it_IT@euro. I solved switching to it_IT.UTF-8 in my /etc/rc.conf file. Then I converted filenames in my home by using convmv:http://www.archlinux.org/packages/extra/any/convmv/

    sorry for my english

  • RELEVANCY SCORE 2.24

    DB:2.24:Xfce4 With Evolution/Exchange f7



    Hi all,

    I have made the switch to XFCE4 and am liking what I see but have one nagging problem. When using gnome with Evolution and the Exchange server plugin, it asked for my exchange password once and probably stored it in the gnome keyring. With XFCE it asks me each and every time for my password when I change between mail and calendar or contacts. It can get a bit annoying. Is there a keyring or similar available in XFCE that works with Evolution?

    ThanksNorm

    DB:2.24:Xfce4 With Evolution/Exchange f7


    Too easy... worked like a charm. Thanks!

    Norm

  • RELEVANCY SCORE 2.24

    DB:2.24:Cs6 Zoom Thru Scroll Wheel Problem 13



    hello, its my first time here. nice to meet you

    i recently participated on windows 10 tech preview and installed my photoshop cs6, i enabled zoom thru scroll wheel and i cant zoom it with my scroll wheel. there is no problem with my scroll wheel since its working with other apps and stuff. is it just me? i need your answers soon. thanks

    DB:2.24:Cs6 Zoom Thru Scroll Wheel Problem 13


    Bumping this thread due to exact same issue. I actually posted a video on youtube about this today, because I really need to get some work done and I can't see myself re-formatting over a scrollwheel issue? Photoshop CC Scroll Zoom Issue - YouTube

    I was first having the issue with CC but I installed CS6 within the last hour after having no luck fixing the issue over 17 hours, and CS6 has the exact same problem (Clearly). I mentioned in the video it did work for a split second at one point, but not once again since.

    Honestly, zoom with scrollwheel is the most absolutely useful and necessary thing in my opinion. I'm going to send a feedback report on the Windows 10 feedback "app" as well, but I don't think this will be high atop their list if it even makes it. Best of luck to us, I hope this is resolved within hours but I'm expecting weeks which means yay no work..

    ***Edit Oct 12th 2014***

    I found a program via "RUSH MAERIQ ROQUE", a user with the same problem, called "KatMouse" which fixes the problem. Just google it, its actual purpose is pretty awesome too, but in turn works to zoom in photoshop with the scrollwheel!

  • RELEVANCY SCORE 2.24

    DB:2.24:Weird Screen Glitch With Certain Projects... Help ms


    Hi, I am expeiriencing an extremely annoying and corrupt problem in Logic pro 9. All updated, and not using any faulty plugins. Check the screen shots, if anyone has ever seen this before please let me know!!Thanks!JamesSometimes my screen just goes white and then the crazy rainbow wheel of death makes his appearence....

    DB:2.24:Weird Screen Glitch With Certain Projects... Help ms

    Hi, I am expeiriencing an extremely annoying and corrupt problem in Logic pro 9. All updated, and not using any faulty plugins. Check the screen shots, if anyone has ever seen this before please let me know!!Thanks!JamesSometimes my screen just goes white and then the crazy rainbow wheel of death makes his appearence....

  • RELEVANCY SCORE 2.24

    DB:2.24:Miss The Track Wheel? 3c


    Is it just me or does anyone else miss the track wheel a little? I had a problem with my trackball on my Curve. I even replaced the trackball and the problem still wasn't fixed.

  • RELEVANCY SCORE 2.24

    DB:2.24:Evolution 2.0 xm



    help guys, Ive got a problem with evolution 2.0

    evolution-shell-Message: Killing old version of evolution-data-server....*** glibc detected *** corrupted double-linked list: 0x080b7f18 ***

  • RELEVANCY SCORE 2.24

    DB:2.24:Kayring For Evolution E Mail-Notification jc



    Hi (sorry for the english),with recently update, when I turn on my PC, after the gdm, gnome ask me a password for keyring beacuse evolution and mail-notification want a password.

    Its possible to resolve the problem?

    Thanks.

    DB:2.24:Kayring For Evolution E Mail-Notification jc


    Yeah, mail-notification is a real nuisence. I cannot get gnome-keyring to shut off bugging me about passwords to mail-notification. Only way to cope with it is to downgrade mail-notification.

  • RELEVANCY SCORE 2.24

    DB:2.24:Page Jumps When Scrolling With Mouse Wheel sf


    I have just purchased a new laptop running windows 7 withIE8. When I scroll down using mymodel# 96781 2.4?G?hz notemouse wheel, the page jumps up and down. How can I fix this problem?..

    DB:2.24:Page Jumps When Scrolling With Mouse Wheel sf

    Go into the control panel, in the top right of the page you will see a search box. Type in
    Scroll Wheel . It should come up with the mouse settings to change the scroll problem

  • RELEVANCY SCORE 2.24

    DB:2.24:Calendar Colours/Colors Broken In Evolution 3z



    Ive just upgraded to evolution 2.12.0 and the colouring of my calendars has stopped working. They have all gone to shades of pink and even if I change them back to the colours I want, that colour goes across the current calendar then gets wiped again with the pink.

    Anyone else having this problem?

    Just for the Americans searching here.... color

    DB:2.24:Calendar Colours/Colors Broken In Evolution 3z


    After a reboot it was still broken but then I changed the colours 4-5 times and suddenly they started sticking and it seems to be working ok now.

    I also had a problem with the calendar running slowly for a while but that cleared up with a restart.

  • RELEVANCY SCORE 2.24

    DB:2.24:Logic Constantly Crashing!! zm


    I am still using logic pro 8, because of all i've problems i've heard about with logic 9, but this last month or so i have been having unbelievable problems with it in regards to it hanging/crashing.

    I cannot seem to go more than 10 minutes without the loss of audio and just getting popping/clicking through the speakers, or, the program will just freeze and the spinning wheel will just keep spinning and i then have to force quit.

    I'm absolutely sick of this now. It's quite clear to me that since i installed snow leopard there has been problem after problem!

    null

    DB:2.24:Logic Constantly Crashing!! zm

    Yeah it will take time

    Spetrasonics
    Komplete
    BFD
    were all problems

    Good luck!

  • RELEVANCY SCORE 2.24

    DB:2.24:Re: Wheel On Mouse Will Not Zoom s3


    Hello, i have a problem with my wheel on my mouse, on my
    previous computer revit would zoom and pan with the wheel
    and pan by clicking on the wheel like autoCAD but since i got
    my new computer with new side scrolling wheel and thumb buttons this function does not work, do i need to get a new mouse or is there a way to make this pan and zoom like i am used to?

    DB:2.24:Re: Wheel On Mouse Will Not Zoom s3

    Did you assign it to be the middle button in the mouse controls? Once I did that it worked fine on mine.

    LD, Kalamazoo MI

  • RELEVANCY SCORE 2.24

    DB:2.24:Evolution 2.30 On Ubuntu Maverick Cant Connect To Exchange 2007 f7



    Hi!

    Im using Ubuntu 10.10 and Evolution 2.30 w/ plugin Mapi to connect to Exchange server 2007. But I cant connect to it. Ran Evolution from terminal, I got log as below:

    =====** (evolution:3084): DEBUG: Loading Exchange MAPI Plugin

    ** (evolution:3084): DEBUG: MAPI listener is constructed with 0 listed MAPI accounts EI: MAIL PREFSFailed to connect host 118.69.193.12 on port 1040 - NT_STATUS_IO_TIMEOUTFailed to connect host 118.69.193.12 (exc1.prism.com.vn) on port 1040 - NT_STATUS_IO_TIMEOUT.=====

    And the UI showed as below:

    =====Authentication failed.MapiLogonProvider:MAPI_E_LOGON_FAILED=====

    Our Exchange server is 2007. And I can use that user/pass to log in via Outlook or Webmail. Admin only opened ports 993,587 and 25. I also tried Evolution 2.91.4 built from source but got same errors

    Does anyone know what problem is? Thanks

    P/s: Admin plz help me move this post to correct sub 4rum. I posted in sub 4rum :-(

    Last edited by portlet (2011-01-10 07:37:37)

    DB:2.24:Evolution 2.30 On Ubuntu Maverick Cant Connect To Exchange 2007 f7

    portlet wrote:
    P/s: Admin plz help me move this post to correct sub 4rum. I posted in sub 4rum :-(

  • RELEVANCY SCORE 2.23

    DB:2.23:Mouse Wheel Under Windows Xp Does Not Work- 9.0.3 1m


    I use Windows XP and JDeveloper9.02 handled mouse wheel scrolling reasonably well(help files could not be scrolled). I can not use the mouse wheel in the Jdeveloper9.03 editor or the help files. Am I missing something? I thought JDeveloper9.03 added mouse wheel capability as its new release feature.
    I know user's of windows 98 had problem with mouse wheel. However, migrating to JDeveloper9.03 seems to have fixed the mouse wheel problem for Windows98 users and made it a problem for WindowsXP users!

    DB:2.23:Mouse Wheel Under Windows Xp Does Not Work- 9.0.3 1m

    You were right. I run JDeveloper 9.03 by itself and the mouse wheel works just right. Thanks.

  • RELEVANCY SCORE 2.23

    DB:2.23:Logic Freezes (Spinning Wheel Of Death) When In Loop Browser... kx


    When I try to click on different loops (that came with Logic) in the loop browser I occasionally get an audible, "dunt"....and then the spinning wheel of death. I mostly happens when I click on a sample while another sample is currently playing. I have to force quit Logic and I send this error report to Apple:

    Date/Time: 2008-10-17 15:55:36 -0400
    OS Version: 10.5.5 (Build 9F33)
    Architecture: i386
    Report Version: 4

    Command: Logic Pro
    Path: /Applications/Logic Pro.app/Contents/MacOS/Logic Pro
    Version: 8.0.2 (1502.22)
    Build Version: 9
    Project Name: Logic
    Source Version: 15022200
    Parent: launchd [114]

    PID: 316
    Event: hang
    Time: 6.96s
    Steps: 44

    + much more jargon that is too lengthy to put in this message.
    Any thoughts??? I have sent this error report probably 30+ times already.

    Thanks people

    DB:2.23:Logic Freezes (Spinning Wheel Of Death) When In Loop Browser... kx

    OK, I think that worked. I've been clicking on everything, really fast, one after and other and no lockups yet. Thanks a million.
    The only folders I dragged back into the browser was "apple loops" and "apple loops for garage band". The only one I haven't dropped in is "apple loops for soundtrack pro", but that's because they seem to be in there. Maybe they're in the apple loops folder too? I don't know.

    Thanks again!!!!

  • RELEVANCY SCORE 2.23

    DB:2.23:Mouse Wheel Not Working Anymore In Max fk


    hellothe mouse wheel is not panning nor rotating in any viewport. It works fine in any browser so the problem is not with the mouse wheel itself. It greatly affects my workflow in animation. Please advise.Thanks.

  • RELEVANCY SCORE 2.23

    DB:2.23:Spinning Wheel Of Death When Recording To External Hard Drive 8f


    I recently upgraded from Logic Gold 6 to Logic Pro 8. In Logic 6 I recorded everything to a 250GB external hard drive with no problems at all. Anytime I try recording to the same drive when using Pro 8 I get the "spinning wheel of death" for about 1 minute and then it begins to record. If I record straight to my internal hard drive there are no problems. Any suggestions?

    DB:2.23:Spinning Wheel Of Death When Recording To External Hard Drive 8f

    you guys are the bomb! thanks so much. I don't know why I didn't think of that. I guess I was too excited to start recording in Logic Studio.

    -Jakoby

  • RELEVANCY SCORE 2.23

    DB:2.23:Nav Wheel Failure k7


    I have a problem with the navi wheel. It currently only scrolls to the left and perceives scrolling to the right as a left scroll. Has anyone else encountered this? Could it be cable damage or power problem or just an equipment failure??

    Thanks
    Steve

    DB:2.23:Nav Wheel Failure k7

    That looks like a dodgy one.

    I'd take that to a repair centre or where you'd got it from.



    Nokia N95
    V 20.0.015
    0546553

  • RELEVANCY SCORE 2.23

    DB:2.23:Evolution Reading Request Problem. f3



    Hi, I do not receive notifications of reading. I tried with the two accounts that I have not come...

    thanks.

    DB:2.23:Evolution Reading Request Problem. f3


    When sending an email, I would like to know if the mail has arrived at destination.So, I go in the menu and click (in Italian) on richiesta ricevuta di lettura. Translated should be request read receipt or something.

    The problem is that even if the cue option, then the mail arrives at destination but not receive the notice.

    Using arch64 + gnome. Evolution update to version 2.12.3

  • RELEVANCY SCORE 2.23

    DB:2.23:Some Advice Before I Buy 78



    hi all,

    just wondered if i can use my pro logic wheel the gt pro wheel i have on the game

    the wheel is the gran turismo one with the badge in the middle. (i know its a dumb question when i add it has the badge but i just wanted to know)

    also how is the game for everyone? is it worth it?

    thanks




    DB:2.23:Some Advice Before I Buy 78

    if you get it from argos and make it up to £100 you will get a £10 voucher back, early christmas present for someone. Thats what i did last week.



    Uploaded with ImageShack.us

  • RELEVANCY SCORE 2.23

    DB:2.23:Evolution Sendimg Email Problem xf


    I am setting up my comcast email through Evolution on Linux Fedora Core 3. I can receive emails fine but I cannot send any out. I know Comcast has had problems with spammers and I am wondering if this is the reason why I cannot send. I have also tried Mozilla's Thunderbird email client and KMail and I have the same problem. Is there anything on my machine that I need to change? My smtp settings are smtp.comcast.net with no secruity and no authentication. Thanks.

    DB:2.23:Evolution Sendimg Email Problem xf

    OK, now I'm confused, what campus? Are you behind your cable modem or not? That's criitcal information. If so, then the problem is definitely with your machine. If you are attempting to reach the SMTP servers via an outside netweork, then you need to talk to your ISP, they might be blocking. Some ISP's do this as a defense against hosting spammers. Comcast DOES allow outside connections, but you must turn on SMTP authentication, or the server will balk at you. The SMTP servers do respond to ping, so it's likely that you have a problem on your network somewhere. Care to post this traceroute? Even if your local ISP is blocking ports 25 and 465, a traceroute should still work, so this is odd.

  • RELEVANCY SCORE 2.23

    DB:2.23:Ibook G4 Keeps Crashing f8


    Hi, im running 10.3.9 on my iBook which i bought off a friend as he upgraded to a macbook pro. I've recently started having alot of problems with it freezing once or twice a day, and I am forced to restart it as there is no spinning coloured wheel or grey wheel, it just freezes. I have read that it might be a problem with the logic board or RAM, but i really dont have a clue. Any help would be much appreciated - im coming to my wits end!!

    Thanks

    DB:2.23:Ibook G4 Keeps Crashing f8

    It sounds like a similar problem that I am having, on which most people seem to think is a problem with the logicboard. You should probably take it in to Apple.

  • RELEVANCY SCORE 2.23

    DB:2.23:Stalling Graphics In Logic 9.1.7 - Colour Apple Wheel Constantly Shows Up, Slowing Down Work Rate! Help. k8


    Hi.i've been playing around with my logic Audio settings trying to change the buffer size etc etc but i can't seem to confige Logic to stop stalling.my problem is that i will be working on a project and then suddly, and very often, it will stall and the coloured wheel will come on but the audio loop i am working on will continue to play, then the image catches up once the wheel has stopped spinning.this is most frustrating and slowing my work rate down substantially!i have an apogee duet, and usuing my external WD FireWire drive for the audio drive while the system drive runs logic. (as I have for years!), i'm on the latest osx Lion too.Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 2.66 GHz Number of Processors: 2 Total Number of Cores: 4 L2 Cache (per Processor): 4 MB Memory: 5 GB Bus Speed: 1.33 GHzat the end of my teather so some sort of idea's/suggestions would be much appreicated.hope you can help, as this is same set up was working fine the last 2months ago before I upgraded to osc lion and the latest logic updated, i can believe I've tolerated it this long!!!!!!!HELP!!!!

  • RELEVANCY SCORE 2.23

    DB:2.23:How To Capture The Mouse Wheel Press Event d7



    Hi Friends,,

    Today I encounterd some strange problem with captureing the mouse wheel press Event .When user press on mouse wheel on a button .

    i am faceing problem with this please let me know.Any help is greatly appreciated!

    Thanks

    SREE

    DB:2.23:How To Capture The Mouse Wheel Press Event d7


    Are you looking for MouseEvent.MIDDLE_MOUSE_DOWN?

    s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
    initialize="btn.addEventListener(MouseEvent.MIDDLE_MOUSE_DOWN, handle)"
    fx:Script
    ![CDATA[
    public function handle(e:Event):void {
    trace(e.type);
    }
    ]]
    /fx:Script

    s:Button label="test" id="btn" /

    /s:Application

  • RELEVANCY SCORE 2.23

    DB:2.23:I Have Drank / Dranken / Drunk/ Supped Upon... The Coolaid... z1


    I bought the logic pro suite as soon as I saw what was possible with a simple keyboard controller and a Mac Book Pro. I have fully invested myself in my professional music career with this suite. I bought it for the Mainstage application. I enjoy the benefits of the other components of this software. I am not even upset that you can now buy the mainstage component by itself from the app store. That is simply the natural evolution of software and marketing. I am wondering however if there might be some consideration of a remote app configuration for the mainstage app the would apply to someone who has an iPad. I own a number of music business related apps that allow for the main program to run on my mac book pro with a remote client either on my iPhone or my iPad. I think this is an important and necessary evolution of the logic pro (or at least) mainstage app.I have 3 different apps purchased from the app store that I use to manage my performance notes..... ie: lyrics ... sets ... and the like.This is done from an iPad that is hanging from my mic stand at the front of the stage. It would be beautiful to be able to manage my Mainstage Concerts from a similar app on the same iPad. I don't have a problem with the core work being done on my Mac back stage. I am at this point though beginning to wonder why I have to walk anywhere from 5 to 30' to get to a mac that could be easily BT'thd to my iPad downstage.Anyone have any thoughts on this?Coolaid drinker #1

    DB:2.23:I Have Drank / Dranken / Drunk/ Supped Upon... The Coolaid... z1

    HiAs Chiccorosso states... if you want to use the iPad as if it were a MIDI controller to control aspects of Mainstage, there are plenty of MIDI apps... I'd go for TouchOSC.If you want to use the iPad to see control MS itself, the VNC way could be the answer.CCT

  • RELEVANCY SCORE 2.22

    DB:2.22:I'M Getting The Spinning Color Wheel Only On Fcp dp


    I'm getting the spinning colour wheel but only on FCP not Logic or iMovie.

    DB:2.22:I'M Getting The Spinning Color Wheel Only On Fcp dp

    So you should start by answering the questions Russ posed.

  • RELEVANCY SCORE 2.22

    DB:2.22:Evolution 3.0.0-1 Segfaults As Soon As It Starts 9x



    No matter how many times I clear the .config/evolution directory or the configured accounts, evolution fails to start, as it segfaults with no warning message

    If I start it with evolucion --express, or evolution -c mail, it works flawlessly. evolution -c contacts works as well. However, evolution -c calendar, evolution -c tasks and evolution -c memos fail with the same segmentation fault.

    What could be wrong with my setup?

    DB:2.22:Evolution 3.0.0-1 Segfaults As Soon As It Starts 9x


    Yup, gnome3 testing just installed, yaourt -Syu just executed

  • RELEVANCY SCORE 2.22

    DB:2.22:Is Htc Mozart 7 Compatible With Parrot Cx3000 Evolution Car Kit xz


    I need to make sure that the HTC Mozart 7 will be able to work with my Parrot CX 3000 evolution car kit through the voice command button on my multi function steering wheel before I buy it. I have had a Samsung GalaxyS which is supposed to have voice dial
    but it will not work. I need the phone to connect automatically when I start the car. I don't want to initiate it each time. The Nokia Classic 6720 phone will connect automatically even if it is in my pocket or in the boot. Has anyone had experience with this?

    DB:2.22:Is Htc Mozart 7 Compatible With Parrot Cx3000 Evolution Car Kit xz

    Can I give you a bit of advice. Dont go anywhere near WP7 if you are even remotely happy with your Galaxy S

  • RELEVANCY SCORE 2.22

    DB:2.22:Big Problem With Asus P5e64 Ws Evolution cf


    I have just assembled this new system, with a QX9770 and 2x2Gb Corsair TW3X4G1800C8DF, inserted into black slots.

    DB:2.22:Big Problem With Asus P5e64 Ws Evolution cf

    I would expect that as the MB BIOS matures the over clock ability will improve.

  • RELEVANCY SCORE 2.22

    DB:2.22:Problem With Evolution x9



    My installation of evolution is having trouble downloading my mail. It was working fine yesterday but perhaps I upgraded something that broke it (Ive been running pacman -Syu and yaourt -Syau pretty often). Evolution starts up find but seems to have trouble retrieving my mail. I can telnet to the pop server fine so this isnt the problem.

    The following errors are printed if I run evolution from a terminal:

    (evolution:3472): GLib-CRITICAL **: the GVariant format string `(u) has a type of `(u) but the given value has a type of `(s)

    (evolution:3472): GLib-CRITICAL **: g_variant_get: assertion `valid_format_string (format_string, TRUE, value) failedMigrating cached dataMigrating config dataMigrating local user data mv /home/bob/.evolution/mail/local/folders.db /home/bob/.local/share/evolution/mail/local/folders.db FAILED: Destination file already exists rmdir /home/bob/.evolution/mail/local FAILED: Directory not empty (contents follows) folders.db rmdir /home/bob/.evolution/tasks FAILED: Directory not empty (contents follows) tasks rmdir /home/bob/.evolution/mail FAILED: Directory not empty (contents follows) local

    Any ideas? Google gives me one or two hits for similar errors but no solutions.

    DB:2.22:Problem With Evolution x9


    Well, if you dont need any of the mail on the local system you can try removing the directories/files it is complaining about... Sorry I dont have an actual, good solution.

  • RELEVANCY SCORE 2.22

    DB:2.22:Navi Wheel In N85 73



    The navi wheel on my N85 works occasionaly.

    Is there a solution to this?

    Everything else about the phone is brilliant.

    It's just the navi wheel...

    Are there others with the same problem?

    Regards,

    Giriraj.

    DB:2.22:Navi Wheel In N85 73

    When i switch off and switch on d phone my mobile navigator key is fail to respond why

  • RELEVANCY SCORE 2.22

    DB:2.22:The Wheel Of Death fz


    On my laptop(powerpc g4 1.33ghz) using the latest version of logic pro, I get the wheel(seems to continue endlessly) after doing almost anything, moving an audio file from one track to the next, hitting the play button etc... I've tried zapping the ram, restarting opening nothing else but logic, and switching users. I've no other hardware connected to my computer. any advise? obviously, I'm not able to use the software with this problem. thanks, mirwin

    g4 tower(733mhz)/pb g4 1.33ghz Mac OS X (10.4.8)

    g4 tower(733mhz)/pb g4 1.33ghz Mac OS X (10.4.8)

    DB:2.22:The Wheel Of Death fz

    thanks much. I will take your advise certainly. fyi, I have 2 computers, a g4 (733 MHz with 1.3 GB of ram), and a powerbook, a g4(1.33 GHz with 256 MB of ram)that I will look into upgrading to about 1gb as you suggested.

    g4 tower 733mhz,1.3 gb and pb g4 1.33GHz,256mb Mac OS X (10.4.9) Presonus Firebox IO,

  • RELEVANCY SCORE 2.22

    DB:2.22:Macbook Pro Problem With Spinning Wheel zc


    hello....i have a macbook pro 15" i7 and i have a problem with the spinning wheel of Mac os X. I am always seeing this spinning wheel. for example I open mail and safari at the same time and i get this spining wheel for 25 secondes...
    any solutions????
    please help me...

    DB:2.22:Macbook Pro Problem With Spinning Wheel zc

    I have also had this problem- It seems to be getting worse rather than better and started about a week after I had some problems during freezing at start up of my macbook pro (which was all sorted).