• RELEVANCY SCORE 3.36

    DB:3.36:What Does Dsc (Directory Service Connector) Do? xm






    What does DSC (Directory Service Connector) do in qlikview?

    QVWS and QVS are running but DSC is shown as disconnected. What effects would this have?

    Thanks in advance,

    Venkatesh

    DB:3.36:What Does Dsc (Directory Service Connector) Do? xm


    Hi Miguel,

    Thanks for the response. While DSC was down, we were trying to assign CALs but could not do so. Now, it makes sense.

    Thanks and regards

    Venkatesh

  • RELEVANCY SCORE 3.29

    DB:3.29:Qmc Is Showing Qvws As Disconnected Even Though Qvws Service Is Running And Accesspoint Is Fine df






    Hi,

    I am not sure why QMC is showing QVWS as disconnected when QVWS service is running and accesspoint is working correctly .

    I have the following setup:

    Server 1 = QVS, QVWS, DSC

    Server 2 = QMS, QDS, DSC

    Additionally, it is odd that QMC can see QVS but not QVWS since they are installed on the same server.

    Thanks for the help!

  • RELEVANCY SCORE 3.26

    DB:3.26:Qvs "Disconnected" All Services Are Running d8






    Hello, I am trying to get qvs working when it shows that all services are running and the only thing not connected is QVS.

    The account running services has admin rights and is part of qlikview admin group.

    In the event log:-failed to retrieve settings from qvserver-failed to send response; an operation was attempted on a non existing network connection

    It is win server 2008 R2 x64intel 2.27GHz (12core)32GB Ram

    Any suggestions would be helpful.Thank you!

    DB:3.26:Qvs "Disconnected" All Services Are Running d8


    Hi Zach,

    I'm having the same issue that you'd experience, and just wondering if you got it resolved.

    Would you mind sharing how did you solve it? I tried changing the domain service account, and even reinstall the Server (QV Server 10 SR3), and it's still happening.

    Thanks

    Anton

  • RELEVANCY SCORE 3.01

    DB:3.01:"No Server" Message In Qv 11 cx



    Good day everybody.

    i use QV (v11) i'm facing a "no server" error some time i reach the access point.i found that QVS@qlickview-server1 in Qlikview Management Consoel is disconnected at the same time.

    for Solving the Problem i must restart QVS service in windows services.then it work correct for two or three daye.and repeat the problem.

    can somebodody help me please?

    DB:3.01:"No Server" Message In Qv 11 cx


    Good day everybody.

    i use QV (v11) i'm facing a "no server" error some time i reach the access point.i found that QVS@qlickview-server1 in Qlikview Management Consoel is disconnected at the same time.

    for Solving the Problem i must restart QVS service in windows services.then it work correct for two or three daye.and repeat the problem.

    can somebodody help me please?

  • RELEVANCY SCORE 3.00

    DB:3.00:Instable Brower.... Why Does It Keep Closing Unexpectedly? s7


    Hi,

    I am running OSX 10.3.9 on a 366 MHz PowerPCG3 Graphite Clamshell with 320 MB of SDRa.

    It seems that when I am on the internet the browsers are always very instable. I will be fine checking my email, etc. but every now and then the browser shuts down unexpectedly. I have dumped all unneeded programs and files from this comp and uyse it primarily as a second computer so that I can check my email from the kitchen. What can I do to stop the browsers from closing? I have tried both Firefox IE, and Safari. It seems to happen with all 3.

    Thanks for the advice!

    DJ

    DB:3.00:Instable Brower.... Why Does It Keep Closing Unexpectedly? s7

    DJ

    Safari ver.1.0.3 on my iBook will not access one of my banking sites on my iBook but a later version on my iMac will work on that same site. I use firefox on the iBook also and it works with no problem on all my banking sites. Try firefox: http://www.mozilla.com/firefox/

    Rick

  • RELEVANCY SCORE 2.88

    DB:2.88:Qlikview Server Is Down a3



    Hi Friends,

    I have installed the Qlikview server with valid license and I got one problem i.e. QVS service is down. I have Uninstalled the server and Installed again. But it is showing SERVER DOWN. Please let me know the answer.Please Find attachment.

    Thanka in advance,

    Chandu

    DB:2.88:Qlikview Server Is Down a3


    Any firewall or proxy running in the computer?

  • RELEVANCY SCORE 2.84

    DB:2.84:Esata Cardbus Sil3112 - Windows 7 Is Not Booting ka


    Installing the Sil3112 based eSATA cardbus controller by Windows Update was working fine. But when connecting my external WD75000 AACS hard disk, the system became instable (a lot of hard disk accesses, mouse pointer freezes). When trying to reboot with disconnected hard drive but inserted cardbus controller, Windows freeze at th really beginning of the boot sequence - after removing the controller it works fine.
    Anybody encountered similar problems? My system: Windows 7 x64 - Notebook MSI S270

    DB:2.84:Esata Cardbus Sil3112 - Windows 7 Is Not Booting ka

    I am having a similar issue.  I have an eSata drive that I connect and it slows the boot process even including the bios.  With out it connected it takes about 30 seconds to boot.  With the drive connected it takes around 5 minutes.   The other part of this is that over half the time the drive doesn't even show up in Disk Management.  My external USB drive on the other hand works every time.

  • RELEVANCY SCORE 2.78

    DB:2.78:Problems Reloading Documents In Qvs zs



    Hi!

    I cannot reload a QVW file within the QVS interface, but it works when I use the Qlikview Desktop. I'm running both at the same machine and I'm using OLE DB to connect. The message that appears in log file is "Error: ErrorSource: (null), ErrorMsg: The specified module could not be found."

    Does anybody knows out what could be happening?

    DB:2.78:Problems Reloading Documents In Qvs zs


    Hi

    I reinstall the Oracle Client and started to use ODBC64 instead of OLE DB and it worked.

    Thanks everyone!

  • RELEVANCY SCORE 2.70

    DB:2.70:Detect Qlikview Server 8x



    Hi everyone,

    I got a question, does anybody know how to detect/identify a QV Server in your network? I mean find out if there is a QVS service running in my network and detect what machine has it?

    DB:2.70:Detect Qlikview Server 8x


    Well the issue was fixed using the QVSDetector in a customer environment working as expected by detecting to QVS with the same license applied, so they were able to shutdown one and solve the problem. Thanks everyone for your help.

    **NOTE: In my environment the QVSDetector doesn't detect my server as well. I don't know if it is firewall or Antivirus issue, I'll keep on trying.

    Regards!

  • RELEVANCY SCORE 2.68

    DB:2.68:Qvws As Separate Install Connecting To Existing Qvs s3



    I'm sure this is simple, but I'm having trouble getting it to work properly...

    I need to setup a stand alone QVWS server on a separate box from the QVS

    My target QVWS additional box is Windows2003 SP2. It is in the same domain as the QVS. I can ping the QVS server and get a response.

    I'm installing QlikView v10 SR2 on both the target QVWS server and it's already installed and working on the QVS server.

    2. I install the 'QV Web Server' from the install profile options.. and the install goes to completion. (there is NO iis on this machine)

    2a. I start the QVWS service, it starts with no errors

    3. I kick off IE 8, type http://'localhost'/qlikview into the address field....and receive the top portion of AccessPoint, along with a warning..."No Server' and a link...'click here for possible solutions' .

    3. I stop the QVWS service, then I modify the c:\documents and settings\All Users\Application Data\QlikTech\WebServer\config.xml

    3a. There is no QvsHost line or QvsTunnel, but there is a DefaultQvs entry that I change from 'localhost' to the server's host name.

    4. I restart the QVWS service, try IE8 to the AccessPoint. Same problem.

    5. I look at the ..\WebServer\Log\XXXXXXX.txt log file and it tells me: 'Warning config error - invalid default qvs: .....'

    So, I tried numerous permutations of the QVS box name, hostname, IP address, etc... same error.

    Last I tried adding tags for QvsHost and QvsTunnel as the documentation mentions, but no joy.

    How do I setup QV so that I have a separate QVWS pointing to an existing QVS ?

    DB:2.68:Qvws As Separate Install Connecting To Existing Qvs s3


    I'm sure this is simple, but I'm having trouble getting it to work properly...

    I need to setup a stand alone QVWS server on a separate box from the QVS

    My target QVWS additional box is Windows2003 SP2. It is in the same domain as the QVS. I can ping the QVS server and get a response.

    I'm installing QlikView v10 SR2 on both the target QVWS server and it's already installed and working on the QVS server.

    2. I install the 'QV Web Server' from the install profile options.. and the install goes to completion. (there is NO iis on this machine)

    2a. I start the QVWS service, it starts with no errors

    3. I kick off IE 8, type http://'localhost'/qlikview into the address field....and receive the top portion of AccessPoint, along with a warning..."No Server' and a link...'click here for possible solutions' .

    3. I stop the QVWS service, then I modify the c:\documents and settings\All Users\Application Data\QlikTech\WebServer\config.xml

    3a. There is no QvsHost line or QvsTunnel, but there is a DefaultQvs entry that I change from 'localhost' to the server's host name.

    4. I restart the QVWS service, try IE8 to the AccessPoint. Same problem.

    5. I look at the ..\WebServer\Log\XXXXXXX.txt log file and it tells me: 'Warning config error - invalid default qvs: .....'

    So, I tried numerous permutations of the QVS box name, hostname, IP address, etc... same error.

    Last I tried adding tags for QvsHost and QvsTunnel as the documentation mentions, but no joy.

    How do I setup QV so that I have a separate QVWS pointing to an existing QVS ?

  • RELEVANCY SCORE 2.66

    DB:2.66:Server Tasks Won't Start In Qmc/ Qemc aa



    Hi All,

    I installed QVS x64 V9 SR6 onto a Windows 2008 R2 server and found issues with using the Distribution Service (Qvb.exe) as a batch reload method.

    I downgraded to QVS x64 V9 SR5 which solved the issues with the QVB but now I am not able to run, or schedule, a task in the either the QMC or QEMC.

    I can reload the files with the x64 client without any problems.

    Any ideas why this may be occuring?

    The 'play' button will dissapear briefly before returning, with no error message displayed (or 'x' icon next to the task). The logs are set on full logging but there isn't any information in there pertaining to task running/ scheduling.

    Thanks Guys

    DB:2.66:Server Tasks Won't Start In Qmc/ Qemc aa


    See the QVS reference manual of SR5 and steps to follow when you upgrade from SRx to SR5. You have to do some specific things to get the worklist filled up.

  • RELEVANCY SCORE 2.64

    DB:2.64:Qms Api, Get Qvs Version 1p



    Hello,

    is there a way to get the QVS version using the QMS API ? I would like to verify that the server is running 11.2 and not 11.0.

    Regards,

    David

  • RELEVANCY SCORE 2.63

    DB:2.63:Qvs Memory Usage - Daily Restarts Of Qvs Service 33



    QV 11.20.12235.0

    Windows Server 2008 R2 SP1

    X64

    Memory: 28GB

    3x Xeon EON E5530 2.4GHz

    10 users

    10 QVW documents

    500,000 records

    ------------------------

    We are daily running through the memory ceiling of our QlikView 11 server, with the QVS consuming 70-80% of available memory. At that point, users are kicked off and unable to reconnect as memory utilization keeps growing. It's not until we stop and restart the QVS service that normal operation is restored. This happens every 18-24 hours.

    We only have 10 users and 10 QVW documents. I have previously worked in a 250-user QlikView environment with 8 quad core processors and 128GB memory - same problem.

    Does anyone have any recommendations to resolve this problem?

    If there isn't a solution to this unsustainable daily operational issue and memory 'leak' maybe it is time to finally look at a competitor solution.

    After 4 years of using QlikView, I love the product, but can't believe Qlik hasn't found a sustainable solution to this memory issue.

    DB:2.63:Qvs Memory Usage - Daily Restarts Of Qvs Service 33


    Klaus

    Older versions of Microsoft .NET had a memory leak that caused problems like you describe.

    Is your .NET a fairly recent version with fairly recent patches applied ?

    The actual joker is descibed in support.microsoft.com/kb/2628838 support.microsoft.com/kb/2600217

  • RELEVANCY SCORE 2.61

    DB:2.61:Qvs Is Down k7



    I have installed QliView server 11 on windows server 2008, all the services when I check on windows services are running, But when I started the mangement console it gives the message that the QVS@qlikview is down and I couldn't enter the licence key.

    Any idea please?

  • RELEVANCY SCORE 2.60

    DB:2.60:Qvs Service Not Auto-Starting k7



    Hi, I'm having a problem installing a new QV 11 server or upgrading an existing one. I'm working on integrating the v11 SR1 install into our product installation.

    New install: I'm doing a command-line installation as I did previously with v10. The end result is that even though I supply the credentials, ensure that the user is in the Administrators group, verify the logon as a service right etc, restart the system, license the server, etc., that the QVS service does not auto-start. I can start the service manually, but it does not auto-start.

    Upgrade: I'm uninstalling the old QV10, and installing QV11, using the same credentials previously used w/QV10. Service does not auto-start.

    Am I doing something wrong? We need our upgrade process to be turnkey (its a fail if it won't auto-start)

    DB:2.60:Qvs Service Not Auto-Starting k7


    go to services.msc and select the service and goto properties

    change from mannual to automatic

    hope this helps

  • RELEVANCY SCORE 2.58

    DB:2.58:Qlikview Server - Ad Service Account Permission ad



    Hi,

    We are running QlikView server version 11.0.11414.0 on Windows 2008 R2 Standard Edition (x64).

    All the components are installed on a single server.

    QlikView Management Service (QMS)

    QlikView Directory Service Connector (DSC)

    QlikView Distribution Service (QDS)

    QlikView Server (QVS)

    QlikView Web Server (QVWS)

    When we try to run the 5 QlikView services (as above) under a AD Service account, they do not restart properly.

    The only service which restarts properly is the QlikView Server (QVS).

    All the other services starts but fails/crashes immediately.

    The only solution at this time is to make the Service account as a Local Admin on the server (or) to run the other 4 services under "Local System".

    I have provided the required permissions as per the QV11 Infrastructure -Minimum Security Requirements.pdf document.

    I have also provide the service account with COM permissions.

    We have a policy which restricts the Service account to have Admin privileges on the server.

    Kindly let me know if there is any other change I need to perform so that the Services can run under a AD Service account.

    Thanks in Advance,

    Kums.

    DB:2.58:Qlikview Server - Ad Service Account Permission ad


    Indeed, i have just installed with the minimum requirements, and only after adding the QlikView Service Account user to Administrators Group on the server, the services start to work.

    it is my first install.

    Can i add an Active Directory Group to the Local "QlikView Administrators Group"

  • RELEVANCY SCORE 2.58

    DB:2.58:Session Collaboration j1



    Hello

    Got QVS 11.2 SR5

    Today we enabled session collaboration on a document and we tried it internally at the client's intranet

    the other user opens the document but when he clicks on a field the screen freezes and the one who shared the session in the first place gets a "Disconnected from server" message and he will never be able to share his session anymore as the screen keeps freezing

    until the QV Server service is restarted

    have you encountered such a problem?

    what shall I investigate to resolve this issue?

    please advise

    Message was edited by: Ali Hijazi

    DB:2.58:Session Collaboration j1


    It looks like it got fixed in higher versions. try to upgrade.

    check below link

    shared session hangs

  • RELEVANCY SCORE 2.56

    DB:2.56:What Might Cause Buttons In Qlikview To Be "Instable"? xp



    Hi,

    I have a phenomenon that I've actually had quite some times before in different scenarios: There is one button in one of the diagrams in a new QlikView_app I've developed that seems instable - like a lightbulb just before quitting its service - it appears and disappears at irregular intervals.

    There was some weird formula for the availability of that button that seemed to be wrong, so I deleted that, but the button is still instable.

    That is quite annoying to see, especially on one of the many operative PCs where my QlikView apps are supposed to run.

    Can anyone offer some advice here as to how that problem might be solved?

    Thanks a lot!

    Best regards,

    DataNibbler

    DB:2.56:What Might Cause Buttons In Qlikview To Be "Instable"? xp


    Hello Philippe,

    I guess you can consider this solved...

    Have a nice weekend!

    Best regards,

    DataNibbler

  • RELEVANCY SCORE 2.56

    DB:2.56:I Don't See The Qvs / Dsc / Qds Services In The Enterprise Management Console xd



    Hi,

    I've just made an upgrade of QV server on a W2k8 server (x64).

    When I go to the QlikView Management console, all is OK.

    When I go to the QlikView Enterprise Mangement Console, in hte list of services, I don't see the QVS / DSC / QDS services.

    I have just

    Service Name Running On StatusCC@my-domain my-domain Off Duty
    Can anybody tell me how to have the CC running and the others services in the list ?

    Regards,

    DB:2.56:I Don't See The Qvs / Dsc / Qds Services In The Enterprise Management Console xd


    After reinstalling several times, I tried to remove all "Qlik" references with regedit.

    I made a new install, and it was OK.

    I still don't know what was the problem, but it works...

  • RELEVANCY SCORE 2.55

    DB:2.55:Qvs 9 - Off Duty - Will Not Turn On 3j



    Aargh.

    Installed QV9 on a machine that has never had QV installed on it before. This is a VM image and is not connected to our network, it is running in a stand-alone mode (cannot connect to any other network. I enter the license and control number, see a Success message. Don't see an updated lef, and after the success message the license screen fields "blank" out. The server status shows Off Duty. The event log says "Cluster limit exceeded, going off duty..." This is not possible. There is no way it sees our other server. Just in case, I also shut down the services of that machine and it I still get off duty status and cluster message in the event log. Uninstalled and reinstalled, rebooted a couple of times. Started with Local System then changed to a specific user account. Nada.

    Win2003 Srv R2 SP2. All services are running (although distribution server and directory service both show disconnected).

    Any ideas out there? Trying to prep a machine for an important demo on Monday.

  • RELEVANCY SCORE 2.54

    DB:2.54:Multiple Distribution Service Tasks 7c



    I have 2 "QlikviewDistributionService.exe" tasks indicated in the Task Manager on my reload server, but only 1 seems to be processing anyting.

    Is this an expected scenario? Should there be 2 tasks?

    Here's my environment info: Window Server 2008 x64, 2 Quad-core CPUs, QVS and Publisher x64 V9SR7.

    Any insight would be appreciated,

    B

    DB:2.54:Multiple Distribution Service Tasks 7c


    I have 2 "QlikviewDistributionService.exe" tasks indicated in the Task Manager on my reload server, but only 1 seems to be processing anyting.

    Is this an expected scenario? Should there be 2 tasks?

    Here's my environment info: Window Server 2008 x64, 2 Quad-core CPUs, QVS and Publisher x64 V9SR7.

    Any insight would be appreciated,

    B

  • RELEVANCY SCORE 2.54

    DB:2.54:Ram Not Deallocated After Reload / Redistribution xz



    Is it possible that the memory used up by a previously opened document is not released after

    the document is reloaded and redistributed?

    For Test Purposes I have a Windows Server 2008 64Bit with QV 10 SR1 and only one distributed Document.

    If 5 users are connected to the document, about 10 GB of RAM are allocated by the qvs Service. When I

    reload and redistribute the document, all users get disconnected, but the 10 GB of RAM stay allocated.

    As users start to connect again to the redistributed document, allocated RAM grows to 20 GB.

    It seems like the timeout parameters work for the redistributed document, but the older version of the

    document allocates RAM forever.

    DB:2.54:Ram Not Deallocated After Reload / Redistribution xz


    Hello Rolandm,

    You could get that behaviour for a number of reasons, such as the"Allow only one copy of document in memory" setting, document timeout or pre-load options.

    Also 10gb QVS would mean quite a large QVW document.

    It also depends on which browser method the users are using, Ajax doesnthave a 'close session' mechanism so the session remains open until the timeout is reached.

    As a side note, there is a way to stop the users getting disconnected,called 'graceful document refresh' but Im having trouble with this feature at present and QT are looking into it.

  • RELEVANCY SCORE 2.54

    DB:2.54:Server Down Error 8s



    I have installed QVS on my office laptop but now these are the following errors i am getting

    On Access point : " No Server "

    On the QEMC : " QVS@inber " Status is " Disconnected " when i checked the services its showing all services Started ..

    Can any body help me with this .. ASAP

    And also suggest to remove the licence key form it . because on the licence TAB it has become non editable text ....

    DB:2.54:Server Down Error 8s


    I have done all this but now there is written Update Licence Key but .. no clik on it is there .. please suggest me how to completely remove the qlik view completely including the registory

  • RELEVANCY SCORE 2.53

    DB:2.53:Accesspoint Suddenly Not Accessible From Ie 78



    Hi everyone,

    Has anyone experienced recent a AccessPoint outage?

    I had QVS/QVWS set up and running fine, but am suddenly unable to access it through IE.

    Currently, I get the following error: localhost is not setup to establish a connection on port world wide web service

    I can verify that all the QV Server services are running, and all appear to be green and functioning from QEMC. My server is on an Amazon AWS instance; is it possible a Microsoft security update caused this to suddenly stop functioning?

    Thanks,

    DJ

    P.S. I'm currently blocked from downloading Firefox by the server's security settings. One more thing to look into.

    DB:2.53:Accesspoint Suddenly Not Accessible From Ie 78


    Hi everyone,

    Has anyone experienced recent a AccessPoint outage?

    I had QVS/QVWS set up and running fine, but am suddenly unable to access it through IE.

    Currently, I get the following error: localhost is not setup to establish a connection on port world wide web service

    I can verify that all the QV Server services are running, and all appear to be green and functioning from QEMC. My server is on an Amazon AWS instance; is it possible a Microsoft security update caused this to suddenly stop functioning?

    Thanks,

    DJ

    P.S. I'm currently blocked from downloading Firefox by the server's security settings. One more thing to look into.

  • RELEVANCY SCORE 2.53

    DB:2.53:Message: No Server, Qvs@Hostname Is Down fd



    Dear All,

    I have installed QvServer 11 SR1 setup with IIS as Webserver.

    All Qlikview services running in Service console IIS is also working fine.

    In QMC Service tab QVS status is Disconneted and it shows

    "Failed to contact the service.hostname: Disconnected"

    In Access Point it shows: Message: No Server

    In Windows Application event log it shows:

    System.Exception: Failed to retrieve document list from the specified QVS

    at QMSBackendCore.Service.ServiceImpl.GetUserDocumentList(Guid qvsID)

    at QMSBackendCore.Service.ServiceImpl.Diagnostics.CacheDocumentAvailable()

    Please advice how do we overcome this? what conflict does it make not to work ?

    Thanks,Kumar

    DB:2.53:Message: No Server, Qvs@Hostname Is Down fd


    Hi kumarm215,

    I've had the same problem you are facing with Qlikview Server on Amazon Cloud. The Qlikview Server was working fine after the installation and in the next day it stopped working.

    In my case, it has occurred due to a service called ec2config which was changing the server name each time the machine was restarted.

    See the following links for details about ec2config service:

    https://forums.aws.amazon.com/message.jspa?messageID=317249

    http://docs.amazonwebservices.com/AWSEC2/latest/WindowsGuide/UsingConfig_WinAMI.html

    I've solved the problem disabling the ec2config service to prevent it to run each time the machine was restarted, and correcting the server name in QVS, DSC and QVWS on QMC- Server - Setup, because the urls was using the older server name.

    Hope it helps you.

    Regards

  • RELEVANCY SCORE 2.52

    DB:2.52:Windows 2000 Server Not Support Qvs 8.5? dm



    Hi, All:

    Windows 2000 server + SP4 does not support QVS 8.5?

    In QVMC, ExeType: Server not running, but in Service Console, we can see the service has been started.

    Anyone can help me???

    Thanks.

    DB:2.52:Windows 2000 Server Not Support Qvs 8.5? dm


    QlikView Server 8.5 and above are not supported on Windows 2000.

    If memory serves me correctly it to do with versions on .net framework needed for QVS 8.5.

    Chris

  • RELEVANCY SCORE 2.51

    DB:2.51:Closing Open Sessions On Qvs 8.5 ms



    On a daily basis, I have users who open document sessions and restart the browser and open a new session. By the end of the day, our QVS has one loaded document with 10-20 open sessions, but no Active Users.

    1. How can I close a session for a user if they open another session?

    2. Is there anyway for me to reset a specific users session without having to Stop and Start the service?

    3. What is the recommended actions required at the user front-end (IE plug-in users) to properly close a session on QVS?

    Thank you.

    DB:2.51:Closing Open Sessions On Qvs 8.5 ms


    Any other suggestions on this. This issue still keeps on coming up. I need a way to restrict one session per user.

  • RELEVANCY SCORE 2.49

    DB:2.49:After Migrated Into Domain B From Domain A Users Unable To Refresh Through Edx xf



    Hi All,

    We have a QVS 9, have settings to run some QVW's through EDX for specific users. It was running fine through EDX.

    Recently the users got migrated into Domain B from Domain A, but the QVS is still under domain A. Now users are facing issue with EDX refresh and they getting the error message(Please refer the attchment).

    Can you guys suggest me that, how to come out of this issue.

    Regards,

    Yoga

    DB:2.49:After Migrated Into Domain B From Domain A Users Unable To Refresh Through Edx xf


    Hi All,

    We have a QVS 9, have settings to run some QVW's through EDX for specific users. It was running fine through EDX.

    Recently the users got migrated into Domain B from Domain A, but the QVS is still under domain A. Now users are facing issue with EDX refresh and they getting the error message(Please refer the attchment).

    Can you guys suggest me that, how to come out of this issue.

    Regards,

    Yoga

  • RELEVANCY SCORE 2.48

    DB:2.48:Understanding Clustering Architecture d1



    Hey, So my current environment has two server which is persumably cluster together. The reason I believe that the servers are cluster is because the cluster created PGO's. So when a user go on to either server via the access point, they have access to all the documents. Now the issue and this might be because I don't have a full understanding of the clustering architecture of Qlikview. This morning, QVS service from Server A failed and only the QVS service from Server B was running. When a user went in via the Access Portal from server A, the user recieved an error back saying something alone the line: 'Cannot contact the service'.

    I was under the impression that if the QVS from server A goes down and a user access the Access Point from server A, then the Access Point will first try and connect to Server A's QVS and if it can't be contacted then it will go to Server B QVS? If this is not the case, from anyone's experience how do you deal with having high availability in your environment?

    Also, is there a way in the QlikView management console to send out alerts to a user when one of Qlikview services goes down?

    Many Thanks in advance for everyone's help,Samuel Pena

    DB:2.48:Understanding Clustering Architecture d1


    if the qvses are clustered then it should look like one qvs in the accesspoint and it should not send users to a node that is offline.

    the qvses are clustered if they have the same license (that supports clustering), are the same version and hae the same document folder set.

  • RELEVANCY SCORE 2.47

    DB:2.47:How An Existing Web Application Connects To Qlikview? a8



    Hi,

    I'm new to QlikView and now trying to explore how my existing web application running on WebSphere application server can integrate to the QlikView Server (QVS). From some technical documents and papers, mentioned that QVS supports HTTPS communication with AJAX. With this, I think my web app can directly invoke QVS to get the result from a web page and no need to run my web app on QlikView Web Server. Am I correct?

    May be someone has discussed this subject (but I could no find similar discussion topic), please kindly let me know.

    Many thanks.

    Cheers,

    Jackson

    DB:2.47:How An Existing Web Application Connects To Qlikview? a8


    Hi,

    I'm new to QlikView and now trying to explore how my existing web application running on WebSphere application server can integrate to the QlikView Server (QVS). From some technical documents and papers, mentioned that QVS supports HTTPS communication with AJAX. With this, I think my web app can directly invoke QVS to get the result from a web page and no need to run my web app on QlikView Web Server. Am I correct?

    May be someone has discussed this subject (but I could no find similar discussion topic), please kindly let me know.

    Many thanks.

    Cheers,

    Jackson

  • RELEVANCY SCORE 2.47

    DB:2.47:Can't Change Default Setup On Qlikview Server Sr2 pz



    I had been running QVS v9 and we ran into a problem with the Distribution Service taking over all the server resource. Found the fix to it to be "install SR2" ( http://community.qlik.com/ forums/t/22108.aspx)

    DB:2.47:Can't Change Default Setup On Qlikview Server Sr2 pz


    I've experienced this problem before, support recommended to recreate the user profile under which the services are running and ran the services under a domain admin.

  • RELEVANCY SCORE 2.47

    DB:2.47:Qvs Service Off Duty After Server Restart f9



    I've searched through some of the threads, but haven't really found an answer. The situation: Our services are split between 2 Windows 2012 servers, on with QVS and QVWS (App server) and DSC, QDS, and QMS (Pub server). Over the weekend, both servers were restarted. This morning when logging in to Access Point, users were receiving a message saying that there was no server. Checking Management Console, QVS was off duty, but when I check the servers, all of the services were up and running. To fix the situation, I had to manually stop and restart the QVS service. Each time the App server is rebooted, the QVS service goes off duty and it has to be stopped and restarted. What is causing this, and what can be done to prevent it in the future?

    DB:2.47:Qvs Service Off Duty After Server Restart f9


    I would do all the Qlikview services ( QVS, QDS, QMS, QVWS and DSC).

  • RELEVANCY SCORE 2.46

    DB:2.46:Qlikview Services(Qvws, Qds And Dsc Showing As Disconnected) zd



    Hi,

    I have installed qlikview 11.0.11440 in windows 2008 64 bit server, when i started the services from services, all services are started and then i applied the license and restarted all the services. All services are showing as started in services(services.msc) but when i open the qlikview management console only 2 services qms and qvs are showing as connected and rest of 3 services(qvws,qds and dsc) are showing as disconnected.

    Can any body help what could be the issue?

    DB:2.46:Qlikview Services(Qvws, Qds And Dsc Showing As Disconnected) zd


    Hi,

    Make sure all the services are having same machine name in the QMC.

    Regards,

    Nirav Bhimani

  • RELEVANCY SCORE 2.45

    DB:2.45:(Qvs) Is Currently Too Busy ps


    Hello Everyone.

    We have QVS 64bit V9 SR4 running, but the AccessPoint has started showing the error message"Access denied! The server (QVS) is currently too busy. If the problem persists, please contact your system administrator!"

    Trouble is that I'm the system administrator but not sure where to look next...

    I've checked:Services all running, logon details okManagement console loads and looks ok (although a little slow to load up)QVS licence ok1 of 5 user cals used1 small test qvw app loaded on the systemCPU usage 5%QVS ram usage is around 5mb

    I've even un-installed the server, and removed the config files from the c:\program data folder

    but the problem still persists!

    Does anyone have any thoughts on this?

  • RELEVANCY SCORE 2.45

    DB:2.45:Issue With User Documents xd


    We have a client using QVS 11.20.12018.0, when they access the User Document tab and select a QVW, the UI displays 'Processing ... Please wait, but the document details never display. Anyone any ideas? The management service log is also attached.

    Thanks in advance.

    Andy

    DB:2.45:Issue With User Documents xd


    No worries glad to help, I would also recommend changing that setting anyway too, just so you always have the xml there if you need to review

  • RELEVANCY SCORE 2.45

    DB:2.45:Qvs Disconnected zd



    I have this QVServer in a recently clean installed Windows Server 2003.

    All the services were going well, and suddendly in the Enterprise Management Console the QVS@ service is not reading the service in Windows (all the services in Windows are still up).

    Why does this happen, how can I solve it?

    Thanks

    DB:2.45:Qvs Disconnected zd


    I'm using QVS SR4 10 and QV SR3 10. I have another QVS in the network but with different licences, because they are two different enterprises but they share Network and DB. How can I check the QV logs?

  • RELEVANCY SCORE 2.45

    DB:2.45:Qlikview Server Installation On Multiple Machines k8



    Hi,

    I installed Qlikview Server ,Qlikview Web Server Qlikview Directory service in one machine.

    i installed qlikview distribution and QMC in second machine.

    Restart the QVS,DSC,QVWS from second machine by giving ip of First server.

    Services are running smoothly but i am facing connection problem with server When users hit into server and application is being up after some time "NO SERVER" comes and QVS starts again.

    Suggest some point ...

    Regards

    Vimlesh

    DB:2.45:Qlikview Server Installation On Multiple Machines k8


    Hi,

    Thanks for reply.

    Now problem is solved.

    when We made common user for both Servers and connect in domain ,all services work properly.

    Regards

    Vimlesh

  • RELEVANCY SCORE 2.44

    DB:2.44:Serial Number Not Accepted 7m



    Hi everybody,

    My client have an licence to his server test, but QVS are no getting it.

    A have no most options avaible in System Setup QVS

    In general tab, there is no space to serial number and control number.

    In the services, appears the status: off duty

    But the client do not have other servers running this license in the same network. (As far as I know)

    The date that is show in LEF (PRODUCTLEVEL) is 2013-08-01. And TEST_EDITION;YES;;

    Is it possible that, this license is out to date?

    Someone could give me some advice?

    Thanks

    DB:2.44:Serial Number Not Accepted 7m


    HI,

    This isn't the place you would input your license number. It is under the Licenses page.

    Bill

  • RELEVANCY SCORE 2.44

    DB:2.44:No Logon Servers Available ? fz



    After performing a scheduled restart of the QlikView Server hardware, the following error was captured in the events log several times...

    131ErrorFailure when creating document directory ("There are currently no logon servers available to service the logon request.")

    Has anyone seen this before? We've been running this server for several years, and this is the first time experiencing this issue.

    Restarting the QVS resolved the issue, but I'd like to understand why it happened in the first place.

    Any assistance would be appreciated,

    B

    DB:2.44:No Logon Servers Available ? fz


    Yes, we are using a SAN to store the user documents, but communication didn't fail.

    There were no error messages on the SAN at that time. Also, we send a timestamp every minute to the SAN from the the QlikView server, and it there wasn't any interuption in that log file.

    Is there anything else it might be?

    B

  • RELEVANCY SCORE 2.44

    DB:2.44:Distribution Service Disconnected z8



    I completed a new installation of QVS 9.0.7257.6 yesterday.

    I created a chained schedule, tested access to the server, running tasks, SMTP alerts etc... all successful.

    I connect to the server this morning and the Distribution Service is disconnected, and my entire task schedule has dissapeared and the SMTP alert settings have vanished.

    The settings returned when I manually restarted the distribution service. My problem is how to ensure it doesn't routinely disconnect and try to understand what is causing the problem.

    The account which runs the services is a member of Qlikview Administrators and Administrators AD groups on the server. I have debug logging in place, but there are no hints in the default.txt log as to why the distribution service was disconnected.

    On the Event Viewer, the service runs almost constantly overnight - well outside the range of scheduled times (see screenshot).

    Every couple of hours the following error is recorded;

    Exception=System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\ProgramData\QlikTech\Publisher\Qlikview Distribution Service\1\Log'. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)

    I would love some help guys, thanks very much.

    DB:2.44:Distribution Service Disconnected z8


    I completed a new installation of QVS 9.0.7257.6 yesterday.

    I created a chained schedule, tested access to the server, running tasks, SMTP alerts etc... all successful.

    I connect to the server this morning and the Distribution Service is disconnected, and my entire task schedule has dissapeared and the SMTP alert settings have vanished.

    The settings returned when I manually restarted the distribution service. My problem is how to ensure it doesn't routinely disconnect and try to understand what is causing the problem.

    The account which runs the services is a member of Qlikview Administrators and Administrators AD groups on the server. I have debug logging in place, but there are no hints in the default.txt log as to why the distribution service was disconnected.

    On the Event Viewer, the service runs almost constantly overnight - well outside the range of scheduled times (see screenshot).

    Every couple of hours the following error is recorded;

    Exception=System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\ProgramData\QlikTech\Publisher\Qlikview Distribution Service\1\Log'. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)

    I would love some help guys, thanks very much.

  • RELEVANCY SCORE 2.44

    DB:2.44:User Docs Still Showing In Qvs But No Folders Mounted zp



    I have unmounted all folders on QVS but still some older documents are showing in the QVS server documents.

    How can I clean these out?

    These are old documents that I accessed at one time but they are no longer relevant.

    DB:2.44:User Docs Still Showing In Qvs But No Folders Mounted zp


    Turned out to be related to "orphaned" Doc CALs.

    It's worth noting that the documents were showing the the document names in CAPS but the original files were not in caps. I wonder if this is QV's way of saying you broke something - which I did.

    If you are running SBE here's how to get the orphaned CALs back.

    http://community.qlik.com/servlet/JiveServlet/download/344300-61977/How-To-Recover-Document-CALs-Assigned-To-A-Deleted-Q

  • RELEVANCY SCORE 2.44

    DB:2.44:Qmc And Qemc Services Not Starting. xs



    Hi all,

    I had to uninstall QV Server 10 from my server and I installed V9, as it was working just fine.

    All the services are running, except for the Qlikview Management service, and it is using the same logins as before. -So there shouldn't be any reason for it to now work.

    Therefore I cannot access :
    QEMC: http://localhost:4780/QEMC/
    QMC: http://localhost:4780/QMC/

    Also, I can see the Services from the previous(QVS 10) installation. None of these are running, but is there any way to remove these.

    Any ideas on how I can get the QV Management Service to start working???

    Much appreciated!

    DB:2.44:Qmc And Qemc Services Not Starting. xs


    We have a similar problem

    we have degraded your server from QV11 to QV 10

    But the issue is we are unable to open the QEMC

    but access point is able to view .

    we have NET Framework version V4.0.

    Reply ASAP.

  • RELEVANCY SCORE 2.44

    DB:2.44:Distribution Service And Directory Service Connector Disconnected Post-Install kp



    All,

    I'm having issues with two services, the DSC and the DS.

    I completed a fresh install of QVS 9 SR5 x64 on a Windows 2008 R2 64-bit server and these two services are disconnected.

    The account running the services is a member of Administrators as well as a Qlikview Administrators. The account is on the same domain as the computer.

    I've tried to run the services on the local system account, the local administrator and a newly created local administrator with no luck. I've also tried V9 SR3 and V9SR5 32-bit.

    I can call the Distribution Service in a batch method and execute tasks, so the service is functioning on this basis. The services not functioning properly is also resposible for the Command Center being inaccessible via the QEMC.

    The logs are inconclusive.

    How else can I troubleshoot this issue?

    DB:2.44:Distribution Service And Directory Service Connector Disconnected Post-Install kp


    Neil,

    please disregard the line 'Normal 0 false false false EN-US X-NONE X-NONE'

    this is a symptom of a direct copy and paste into the message composition text box on these forums.

  • RELEVANCY SCORE 2.44

    DB:2.44:Problem With Qv Server 10 Sr1 x3



    Hello,

    I have installed the QV Server SR1 on my local machine as Administrator. All services are running. There are no entries in the event viewer.

    In the QMC I cannot enter my licence as the fields are not enabled. It says: Server is down.

    In other dialogs the status of the QVS service is displayed as disconnected.

    Can anybody help?

    Kind regards

    Christian

    DB:2.44:Problem With Qv Server 10 Sr1 x3


    i hace the same problem, can anyone explain the solution please!!!!

  • RELEVANCY SCORE 2.43

    DB:2.43:Qv Service Is Starting But Console Showing Disconnected 9p



    Hi,

    I have stopped and started the services in QV11. All the service got started except Qlikview Server, showing disconnected in console.

    What could be the issue?. It was running properly before.

    Regards,

    Sivaraj

    DB:2.43:Qv Service Is Starting But Console Showing Disconnected 9p


    Could you call the server by using in your browser qvp://server ?This require plug-in installation of course but is a good way to check if qvs is responding.

    In your server configuration link from QMC to QVS are you using qvp//ip , dns name or just server name?Do you have a defult installation with server config ini file under c:\programdata\qliktech ? Domain or local account? What say QMC log under C:\ProgramData\QlikTech\ManagementService\Log?

    BR//Gonza

  • RELEVANCY SCORE 2.43

    DB:2.43:Dms Authorization Code Is Not Working On Qvs 10 mk



    I have read thread http://community.qlik.com/message/49657#49657. The sample authorization code (written in C#) is working fine on QVS 9. But it is not working on QVS 10 (Both on SR2 and SR3), Actually the session attribute in response is empty. I do not which QVS component is necessary for these codes. Anyone can help me on this? Thanks in advance.

    DB:2.43:Dms Authorization Code Is Not Working On Qvs 10 mk


    I have read thread http://community.qlik.com/message/49657#49657. The sample authorization code (written in C#) is working fine on QVS 9. But it is not working on QVS 10 (Both on SR2 and SR3), Actually the session attribute in response is empty. I do not which QVS component is necessary for these codes. Anyone can help me on this? Thanks in advance.

  • RELEVANCY SCORE 2.43

    DB:2.43:Sdk : Required Access Level Qlikviewmanagementapi (Qv10) f8



    Hi

    I tested the TaskConsole sample shipped with the SDK.

    it builds ok but i get an error saying : Authorization failed for user domain\user required access level QlikViewManagementAPI

    when i run it.

    Running GA version of QVS 10

    Any ideas?

    DB:2.43:Sdk : Required Access Level Qlikviewmanagementapi (Qv10) f8


    How can you become a member of these two groups? I am searching them in the groups list but I cannot find them.

  • RELEVANCY SCORE 2.43

    DB:2.43:Qvs Service Gets Disconnect??? ds



    Hi All,

    I am facing strange problem from last few days i.e my QVS gets disconnected 2-3 times in a day, previously it was running soomthly without disconnection.

    I didnot start any services, doesnot install anything on my system.

    Currently using QVS x64 SR1 on windows server 2003 R2 64bit (SP2)

    Any suggestion / solution would be appreciated

    Thanks Regards

    DB:2.43:Qvs Service Gets Disconnect??? ds


    Setup up log level to debug and get back with log information.

    Check so you dont have any performance issues, like RAM.

    Have you recently added more applications or load to the Server?

  • RELEVANCY SCORE 2.42

    DB:2.42:How Can I Set Memory Limits For All Documents On A Server d9



    Does anyone know if there is a simple way to limit the amount of RAM that can be used by a document on the QlikView Server?

    I administer a server that houses 85+ documents, some of which are 300-400 MB in size. I have set-up calculation conditions on serveral charts, but still I can experience a 10-20GB spike in RAM when some unidentified charts load. Most of which is returned after the calculations are complete. If all the available RAM is consumed though, the server thrashes and eventually I'm forced to restart the QVS service.

    I'm running QVS v9 SR7 64bit on a Windows Server 2008 with 32GB of RAM.

    Since I allow the users to create collaborative objects, I'd like a way of identifying the culprit(chart), and limiting the amount of RAM that can be used by a document.

    Any suggestions would be appreciated,

    B

    DB:2.42:How Can I Set Memory Limits For All Documents On A Server d9


    Any updates on this? Is this feature planned?

    We keep having to reset QVS because the server reaches 100% memory utilization and things start to break.

  • RELEVANCY SCORE 2.42

    DB:2.42:Group Authorization To Documents 3m



    Hi,

    Ive been told that it should be possible to use AD groups to authorize qlikview documents. But I cant work it out.

    I use Qlikview Server and Publisher 9.0.7257.6.

    DSC is config to use both AD and WinNt. User account running QVS is member om Qlikview Administrators.

    Please help!

    DB:2.42:Group Authorization To Documents 3m


    It seems to work after a restart of the server.

    Thanks for your input!

    /HP

  • RELEVANCY SCORE 2.42

    DB:2.42:Qv Server Service Starts With Error 8p



    Hi,

    I've uninstalled QV serevr 8.5 and installed the version 9.0. after the restart in Services log I see that all the QV services are started, bet when I try to open QV Management console I see 3 disconnected services.

    In QVS event log I find a following line for each service restart:

    2009-07-07 11:11:44 2009-07-07 11:11:44 2 104 Warning The initialization process failed. Cluster limit exceeded, going off duty
    Please advise how to deal with that?

    DB:2.42:Qv Server Service Starts With Error 8p


    is there some guidelines what exactly to remove and from where?

    especially what registers and settings in some hidden folders.

    Thanks,

    JC

  • RELEVANCY SCORE 2.42

    DB:2.42:Qvs Service Down According To Qmc, But Still Showing As Running In Server Services Menu a3



    I am wondering if anyone has encountered this. Today, according to the QMC,our QVS service became disconnected.

    However, when I called our server admin, he mentioned that the QlikView server service still showed as running. I had him do a restart of this service and everything went back to normal.

    Note that we do have our QlikView server services (QVS, QDS, QWS...etc) set to automatically restart after 5 minutes of down time, but in this case it was never stopped (according to the services directly on the windows server).

    Has anyone every experienced this? Why would this happen?

    Thanks,

    Andrew

    DB:2.42:Qvs Service Down According To Qmc, But Still Showing As Running In Server Services Menu a3


    No, I havent found a direct cause of this. However, as Michael has stated, the reboot takes care of the issue.

  • RELEVANCY SCORE 2.42

    DB:2.42:Http://Localhost/Qvajaxzfc/Accesspointsettings.Aspx Error 500.19 ? 88



    Hi All,

    I have the following qlikview 10 SP3 installation scenario on 2 virtual servers:

    Server 1

    - QlikView Server

    - QlikView WebServer

    Server 2

    - QlikView Distribution Service

    - QlikView Directory Service

    - QlikView Management Service

    on Server 2 services works fine, but on server 1 QVS work fine but QWVS does not work.

    On QEMC QVWS has status Disconnected -- Message: Failed to contact server

    if I call the page http://localhost/QvAJAXZfc/AccessPointSettings.aspx I'm getting the
    HTTP Error 500.19 - Internal Server ErrorThe requested page cannot be accessed because the related configuration data for the page is invalid.ModuleIIS Web CoreNotificationBeginRequestHandlerNot yet determinedError Code0x80070021Config ErrorThis configuration section cannot be used at this path. This happens when the section is locked at a parent level. Locking is either by default (overrideModeDefault="Deny"), or set explicitly by a location tag with overrideMode="Deny" or the legacy allowOverride="false". Config File\\?\C:\Program Files\QlikView\Server\QlikViewClients\QlikViewAjax\web.configRequested URLhttp://localhost:80/QvAJAXZfc/AccessPointSettings.aspxPhysical PathC:\Program Files\QlikView\Server\QlikViewClients\QlikViewAjax\AccessPointSettings.aspxLogon MethodNot yet determinedLogon UserNot yet determined

    I googled and found the page http://support.microsoft.com/kb/942055 -- http://learn.iis.net/page.aspx/145/how-to-use-locking-in-iis-configuration/

    But I did the same installation before on a normal machine and I shouldn't definitely change %windir%\system32\inetsrv\config\applicationHost.config.

    This is the first time I'm getting this error.

    Does anybody ever faced the same problem ?

    thanks in advance

    Glnur

    DB:2.42:Http://Localhost/Qvajaxzfc/Accesspointsettings.Aspx Error 500.19 ? 88


    Hi All,

    I could solve the problem. I'm really happy :-)

    It seems that I couldn't open any aspx pages due to incorrect .net 4.0 installation on server.

    I googled and found out that sometimes during the .net 4.0 installation not all registry entries will be installes correctly :-( and this was exactly my problem.

    In QVWS log I found the warning:

    http://muswqlik001.ger.corp.intel.com/QvAJAXZfc/AccessPointSettings.aspx

    6/27/2012 14:36:59.6163967 Warning file not supported. (.ASPX)

    After .net 4.0 re-installation everything works fine.

    cheers

    Glnur

  • RELEVANCY SCORE 2.42

    DB:2.42:Qlikview Server Error ad



    Dear QlikView Support,

    I am Rishi Beri (Developer Qlikview) I am stuck into a crucial situation and I want a help from your side .

    I will explain you the problem now .
    Scenario 1

    Actually I had used the licence key of my client for the testing purpose (Publishing and section access) on my official laptop whose domain is Atrapa and user name is rberi .I installed the QV QVS on my system and applied the licence to it and till Monday it was running fine there were no errors as such . But suddenly the following errors started coming which are in the Picture attached :
    1. Status tab of QEMC is showing that Qlikview Server disconnected
    2. In the user Tab its showing Could not connect to the Qvs
    3. In the licence Tab its showing Server Down and the button Update licence on server and apply licence is not working
    4. All the services status are started and working properly .

    Qlikview Server version on my laptop : 9.0.7320.7

    Scenario 2

    One More issue and its as follows :

    On the test server of the client I used the same key and installed the QVS its running fine but the Access Point is showing no values that is all the drop Down are coming blank

    All the services are running fine on this system.

    Qlikview Server version on Client : 9.0.7257.6

    Rishi Beri+91 9911744655

    DB:2.42:Qlikview Server Error ad


    Hi,

    I have a similar problem to this whereby i cannot get QVS to work. When i lok at the windows event viewer (eventvwr.msc) i see lots of errors against the Qlikview Distribution Service(QDS) and Qlikview Management Service(QMS). The error messages for QDS are Authorization failed for user NT AUTHORITY\SYSTEM and for the QMS it says bAccess Denied/bbr/br/Membership of local security groups is missing.br/br/Please refer to the manual for more information. I have ensured that the user the services are logging in as have both Qlikview Administrators and Administrators rights.

    I am now thinking of uninstalling and reinstalling but need to know which windows registry entries to delete.

    Thanks

    SKH


  • RELEVANCY SCORE 2.42

    DB:2.42:Qlikview Services,Qemc,Qmc 93



    Hi,

    We have the QlikView Server installed in the domain.I have changed the service Account from one user to another user. Added the new user in to the QV Administartaor and local administrator group. I have logged off and logged in .

    After doing this these are list of problems we are facing

    1. QVS started showing unlicensed

    2.No documents are shown in the User Documents tab in the QEMC

    3. Not able to see the Source Document Tab in the QEMC.

    4.In the system -setup tab-Qlikview Server tab - i am getting the error as "Sequence contains no matching element,Makre sure that QVS is running with correct credentials"

    5. In the QMC user Documents tab i am getting the error as "Invalid request:Exception has been thrown by the Target on invaction "

    6. Is it necessar to reapply the licesnce when ever there is a change in the service account user credentials.

    But all the services are running fine.

    Please suggest it is very urgent.

  • RELEVANCY SCORE 2.42

    DB:2.42:Qvs Off Duty V11 md



    Hi,

    Could you please provide some assistance with the issue below?

    Issue: Qlikviews access point reports error Message: No Server

    Actions taken to unsuccessfully rectify the issue: All the following Qlikview services were successfully stopped and started: Qlikview Directory Service Connector, Qlikview Distribution service, Qlikview Management service, Qlikview Server and Qlikview webserver. These actions did not resolve the problem

    Investigation: the Qlikview management console reports under Status Services that QVS@owdprddbsw002 is Off Duty.

    When I then go to Status QVS Statistics Performance QVS@owdprddbsw002, under Off Duty there is the following message:

    Cluster Join Denied by qlvprdappw001-backup.optus.com.au. This could be because of mismatching version or document root

    Servers in operation

    Please note that we only have Qlikview running in one single server. This server was restarted last week and since then QVS is Off Duty. I suspect a config issue, but i don't know where to start. Please help.

    Other info:
    Operating SystemWindows Server 2008 R2 Standard Service Pack 1 (64 bit edition)Operating System Version6.1.7601Wow64 modeNot using Wow64QlikTech ProductQlikViewServer 64-bit Edition (x64)Product Version11.0.11440.0

    DB:2.42:Qvs Off Duty V11 md


    Please mark this post as "Solved"

    Regards.

  • RELEVANCY SCORE 2.42

    DB:2.42:Windows 2008 Server R2 Install Problem fa



    A few days'm trying to install Qlikview Server on Windows 2008 R2 without success.

    I'm using:

    A clean installation of Windows Server 2008 R2;

    All Windows Updates;

    Dotnet Framework 4.5;

    I install Qlikview Server 11 and all services start up, but in the service management console appears qvs down.

    The user is running Qlikview Administrators group;The firewall is turned off;I tried using localhost and the number of ip;

    Already tested versions 10 and 9.

    Nothing solved the problem.

    DB:2.42:Windows 2008 Server R2 Install Problem fa


    I have no number.

    I researched a bit more about the problem and discovered that the root problem is the time of my virtual machine. She was wrong, what the DNS did not work properly. I adjusted the server time and everything was fine.

  • RELEVANCY SCORE 2.41

    DB:2.41:Not Able To Access Documents Using Access Point. Please Refer Below Screenshot 8x



    Hi All,

    Not able to Access documents using Access Point. Please refer below screenshot.

    This is the link I am using:

    And also not sure why below 3 servers are not running.

    How to Change QVS@ from local to service account?

    DB:2.41:Not Able To Access Documents Using Access Point. Please Refer Below Screenshot 8x


    Hi All,

    Issue has been resolved by following attached documents.

    So basically Installed all the components mentioned in document QlikView Installation on IIS8 (http://community.qlik.com/servlet/JiveServlet/previewBody/5922-102-1-7164/QlikView%20Installation%20on%20IIS8.pdf) and followed document QlikView Server Installation Guide (!http://community.qlik.com/docs/DOC-5291) for QlikView Installation and Setup.

    and for QlikView IIS (Under Application Pools) identity I set to my service account. Now Access-point is opening but still 2 Services (QDS and DSC) are not running when I Check in QVMC but when I check from services there 2 servers are up and running.

    Open QVMN --Status--Services (DSC--Status Disconnected, QDS--Status Disconnected).

    What needs to do so that they should get connected

  • RELEVANCY SCORE 2.41

    DB:2.41:Setting Users From Remote Desktops Up On Qlikview Server sf



    I bought a windows 2008 r2 server for the purpose of installing QVS and enabling other people at our office to remote into the server to access files on Qlikview simultaneously. I have tried for many hours, including phone conversations with Qliktech, but I have been going in circles. First, I installed an active directory and made the server a domain controller, but learned that QVS won't work on the domain controller. Then after going back and forth with Qliktech, I removed domain controller status and got the server up and running (I think) including applying license successfully, but nobody could access it via their desktop Qlikview applications.

    How do I configure QVS on the server and how do I then assign users so that we can each access QVS remotely from our desktops? Advice would be greatly appreciated.

    DB:2.41:Setting Users From Remote Desktops Up On Qlikview Server sf


    I bought a windows 2008 r2 server for the purpose of installing QVS and enabling other people at our office to remote into the server to access files on Qlikview simultaneously. I have tried for many hours, including phone conversations with Qliktech, but I have been going in circles. First, I installed an active directory and made the server a domain controller, but learned that QVS won't work on the domain controller. Then after going back and forth with Qliktech, I removed domain controller status and got the server up and running (I think) including applying license successfully, but nobody could access it via their desktop Qlikview applications.

    How do I configure QVS on the server and how do I then assign users so that we can each access QVS remotely from our desktops? Advice would be greatly appreciated.

  • RELEVANCY SCORE 2.41

    DB:2.41:Sharepoint Permissions 9c



    I read through the other post on this but I was unable to find an answer.

    I would like to read data from an xls file stored on our shareponit site. I am able to accomplish when developing but when I run the job through publisher it fails. I am guessing it is a permissions issue. I am guessing the account running the QVS and QVP services needs permissions to sharepoint? We have tried a few different combinations but the job is still failing. Does any one have any idea of what permissions need granted to who?

    We are running 8.5 on a windows 2003 64 bit server, webclient service is installed and started.

    Thank you

    DB:2.41:Sharepoint Permissions 9c


    We have the same exact problem in our environment and all QlikView services run under a system account which has full permissions to the SharePoint location. We tried this with both SharePoint 2007 and 2010. We also did a trace on the QlikView server and when the Publisher tries to reload the document it gets a 401 when trying to execute an HTTP OPTIONS command to our SharePoint server.

    Manually logging on to the server as the service account that runs publisher and navigating to the SharePoint UNC path provides an authentication prompt. After authenticating with the service account and password we're able to open the source file we're trying to reload from.

    Any other ideas? I'm going to try to submit this to support but it may take a while to get it resolved.

  • RELEVANCY SCORE 2.41

    DB:2.41:How Is Qlikview 10 Server For Bugs ms



    How's QlikView Server version 10 SR1 for issues?

    I'm running QVS version 9 SR6 and I have a few issues, but for the most part stable and well performing.

    I'd like some feedback on version 10, because it took over a year and 6 service releases in version 9 to resolve most of my issues, and I don't want to go through it again.

    Any feedback, positive or negative would be appreciated,

    B

    DB:2.41:How Is Qlikview 10 Server For Bugs ms


    Kal,

    Thanks for the feedback. These are the type of issue that I'm attempting to avoid. Did your support contact indicate if these will be fixed in v10 SR2? I presume you are using SR1, not the beta version of SR2.

    Cheers,

    B

  • RELEVANCY SCORE 2.41

    DB:2.41:Disconnected Ap When Running As A Service 7p



    Hi,

    I'm running 2.4.6 on windows 2008. If I run the controller in desktop mode all is ok, it can see the AP's and everything works as expected.

    However, I have also configured the controller to work as a service. It originally worked but now the AP's are showing disconnected. This only happens when running as a service, if i switch back to desktop mode the AP's reconnect.

    What am I missing?

    DB:2.41:Disconnected Ap When Running As A Service 7p


    I'm running with the theory that if that were true, you would not be asking the question in the first place - so I speculate that they are the same software on the same server but with different data. No guarantee that I'm right, just a theory that would match what you see for behavior where one instance of the controller sees the APs and the other does not. Forgetting one AP temporarily and switching controller startups is a way to try and check that theory. It could very well be wrong.




    18 UAPs and a UAP Outdoor with 2G16-90 Sector, 3 NSLM5, a mile or so of single-mode fiber, and a crummy cable connection to the internet.

  • RELEVANCY SCORE 2.40

    DB:2.40:Webparts 10 Sr1 - Cal Use mp



    Hi experts,

    could you please help me with finalization of WebParts.

    We have Sharepoint 2007 and on separate machine the QVS 10 SR1 (both in same domain).SP 2007 settings:- SP machine is configured in Active Directory as 'Trust this computer for delegation to any service (Kerberos only).- Application pool is running under account: 'Network Service'- Authentication providers IIS Authentication Settings: Integrated windows auth.: Negotiate (Kerberos)

    QVS settings:- QV services are running under Domain account (or as well under Local System = same result). Accounts are in QV Admin.group.- System\Setup\QVS\Security\ Clients=Allow anonymous, Authorization = DMS - see picture bottow below- System\Setup\QVWS\Authentication=Login, Type = Ntlm - see picture bottow below- Manually edited Config.xml in C:\ProgramData\QlikTech\WebServer. Changed row from QvsAuthenticationProtNegotiate/QvsAuthenticationProt to QvsAuthenticationProtKerberos/QvsAuthenticationProt- We have only Named CALs and those I would like to use

    I uninstalled webpart 9 and replaced it (with difficulty) with 10 version.

    I can see:- this QV webpart- QV documents published on server (but only those allowed to see by anonymous users)- Types (Pivot table,...) and Objects- but can't see any result, picture, drawn objectThe website throw me an error in left bottom corner with error 'Access is denied':

    And what is weird is that on QVS I can see that open document with my user name, but when I check Session log there is CAL Type = None!!!

    I appriciate any help with this desprite implementation!

    DB:2.40:Webparts 10 Sr1 - Cal Use mp


    Hello smelcdus,

    Could you please share this document? This URL does not seem to be working anymore.

    Thanks,

    Amit

  • RELEVANCY SCORE 2.40

    DB:2.40:Hkey_Local_Machine Settings 7 Is Missing In Registery ?? ss



    Hi All,

    I installed last week qlik 10 server on 2 machines.

    machine 1 - qlik server and web server (qvs and iis)

    machine 2 - qlik publisher (distribution and directory service)

    Management service is also running on machine2.

    Everythhing works fine.

    I would like to change some settings and opened

    HKEY_LOCAL_MACHINE\SOFTWARE\QlikTech\QlikViewServer\Settings 7

    But I cannot find any qlik server setting 7 entry in registery !!!!

    This should be the counter part of settings.ini in registry entries.

    I installed for the first time such a distributed scenario.

    How can I correct this ?

    Thanks kind regards

    Glnur

  • RELEVANCY SCORE 2.39

    DB:2.39:Wcs Is Facing Instability 4.1.83.0 ac



    We have WCS 4.1.83.0 is installed in 2003 Server but nowadays the same is instable, When we done some analysising and found that "Wireless Network Management Application" was stopped and we were not able restart it. There is no problem with OS as well. After the service stops we need to reboot the server to enable this service.

    Any options

  • RELEVANCY SCORE 2.39

    DB:2.39:Accesspoint "Message: No Server" xp



    When using a browser to access AccessPoint (http://[hostname]/qlikview/index.htm), we receive a red banner "Message: No Server". This message shows up when connecting to AccessPoint via the browser remotely or on the local server.

    All servies are running according to QVMC and Windows Services.

    We can connect to the QVS via the desktop QV client.

    We are using IIS for the webserver.

    The QV service account is in the QV and Local Admin groups.

    QVS version 11.0.11154.0

    I am fairly certain it is something really simple but after a number or reinstalls I am out of ideas. Any help at all would be aprpeciated.

    DB:2.39:Accesspoint "Message: No Server" xp


    For those working on a similar issue as Karthikeyan:

    I was able to do this with the group IIS_IUSRS. After adding the account to the group and verifying the account was set as the ApplicationIdentityPool, I was able to load the Access Point. Funny story though, I was using my personal account for the fix and it changed my permissions, kicked me out of the machine and didn't allow me to log back in until I reset my login permissions. How rude!

  • RELEVANCY SCORE 2.39

    DB:2.39:Xml Files sm



    Hi

    I have a little problem to locate some XML files:

    First i will explain our environment:

    First we had in production 1 server: QV02

    Then we added QV03

    QV03 was replaced by QV04 what was a much more powerfull server

    Then we added a new server QV05

    On QV02 there is QVS and QDS

    On QV04 there is QVS

    and on QV05 there is QVS and QDS

    There is a cluster for QVS but no cluster for QDS.

    On the server QVWEB01 there all the log files are stored

    All servers are running QV 11.20 (on windows 2008 R2)

    On QVWEB01 i can find all XML files for QV02 (C:\ProgramData\QlikTech\ManagementService\QVPR)

    But i can not find any XML files for QV05 (not on QV05 and not on QVWEB01)

    I want them to be on QVWEB01

    Any suggestions?

    DB:2.39:Xml Files sm


    You have a single QMS (Management service) defined right?

    The QVPR definded the QMS contains tasks for both QV02 and QV05.

    -Rob

  • RELEVANCY SCORE 2.38

    DB:2.38:Lef Has Expired. 1c



    I have had QVS and Publisher running for some time, then some time in the last week, the publisher piece seems to have disappeared. The scheduled tasks still run every day, but the DocumentsSource Documents tab has disappeared, as well as all the tasks on the Status tasks page.

    I also noticed that in StatusServices there is a service name CC@computername that is in "Off Duty" status with the message LEF has expired.

    So all this seems to indicate to me that the license for Publisher has expired.

    Is this a valid conclusion? and if so, what do I need to do?

  • RELEVANCY SCORE 2.38

    DB:2.38:Sending Email From Qvs (Missing Fqdn) 31



    In the QV EMC under system/setup there's a functionality to send email via the qvs Mail Server.

    On our internal network the smtp server requires a fqdn (Fully qualified domain name) like qvs.ad.yourdomain.com, if not supplied when talking to the smtp server during the EHLO process, the smtp server will reply with a error like " ... bogus HELO name used: qvs

    My problem is that its simply that i have no way ofchanging the setting of the server name, as qlikview don't use the fqdn, but only the servername.

    The server is a member of our ad, and named qvs.ad.mycompany.com.

    Running a single server 64 bit on Win2008 version 10 SR3

    Any ideas?

    Lars Poulsen

    DB:2.38:Sending Email From Qvs (Missing Fqdn) 31


    QlikTech have now accepted this as a bug. bug ID is 41679.

  • RELEVANCY SCORE 2.38

    DB:2.38:Warning: Many Lost Ticks. Your Time Source Seems To Be Instable a1


    i am running centos 5.1 as a guest machine. when i leave the window and come back to it later, i see the following at the console:

    warning: many lost ticks.

    your time source seems to be instable or some driver is hogging interupts

    rip __do_softirq+0x53/0xd5

    i've already installed the centos-vm kernel that uses 100hz instead of 1000hz, but i'm still seeing this message.

    also my system date and the bios date from hwclock is showing the date incorrectly...saying its 3:30 am tomorrow instead of 4:30pm today (gmt -6)

  • RELEVANCY SCORE 2.38

    DB:2.38:Qvs 10 Sr1 With Ldap mj



    Hi anyone there, I have an issue, I tried to connect QVS with LDAP (Tivoli in Linux) but we couldn't make it work, any of you have an example of configuring LDAP on QVS 10? We have this connection parameters:

    LDAP IP Address: 192.9.207.98dn: ou=users, ou=java_applications, O=CASA

    DB:2.38:Qvs 10 Sr1 With Ldap mj


    Hi anyone there, I have an issue, I tried to connect QVS with LDAP (Tivoli in Linux) but we couldn't make it work, any of you have an example of configuring LDAP on QVS 10? We have this connection parameters:

    LDAP IP Address: 192.9.207.98dn: ou=users, ou=java_applications, O=CASA

  • RELEVANCY SCORE 2.38

    DB:2.38:Qvs Service Instable, Disconnected But Running. 93



    Hi there.

    We are trying to get a Qlikview Test Server to work, that is: a QVS and a Qlikview Web Server both QV11.2 running on a old Windows 2003 server, where we earlier had a QV 10 later QV 11 running (Full Single Machine install). Before installing the QV 11.2 we did rename all old Qlikview-folders with a prefix "_OLD" and went through the RegEdit removing old Qlikview-keys.

    All the below is x64.

    The plan was to integrate the QV Test Server and the Test AccessPoint into the QMC on the new qv production setup, which is a Full Single Machine Install on Windows 2008 x64 with a IIS (not Qlikview Webserver).

    The problem(s) on the Test invironment:

    1. The QVS service is unstable, which means that it is possible to get the QVS service stated and to get the QMC on the production side to see and to talk to the Test QVS, but after a few minutes the QMC looses the connection to the Test QVS telling that the QVS "is down" and "disconnected" allthough the Test QVS service is still running on the Windows 2003 server.

    Trying to license the Test QVS we had the problem that it was not possible to get the LEF file in the normal way by pressing apply after Serial and Code numbers was typed in. We had to copy the LEF text directly into the form in the QMC.

    In the QV Event log we find: "300 error Init: The initialization process failed. Failed to capture port."

    In the Windows Application log we are getting the following errors:

    A.

    Detection of product '{5DBE95F6-823A-4547-9921-CEDFADA1D2D8}', feature 'Main', component '{B16F8F4C-AC5F-45B6-A585-E59FC813C246}' failed. The resource 'C:\Program Files (x86)\McAfee\Common Framework\LazyCache.dll' does not exist.

    B.

    Detection of product '{5DBE95F6-823A-4547-9921-CEDFADA1D2D8}', feature 'Main' failed during request for component '{21E2C07A-F2D2-4B27-811F-92661F26B1C4}'

    C.

    Reporting queued error: faulting application QVS.exe, version 11.20.11922.0, faulting module QVS.exe, version 11.20.11922.0, fault address 0x0000000000ead059.

    D.

    Windows cannot query DllName registry entry for {CF7639F3-ABA2-41DB-97F2-81E2C5DBFC5D} and it will not be loaded. This is most likely caused by a faulty registration.

    E.

    The description for Event ID ( 300 ) in Source ( QlikViewServer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Init: The initialization process failed. Failed to capture port.

    In the Windows System log the following errors can be found:

    A.

    Remote Access Connection Manager failed to start because the Point to Point Protocol failed to initialize. %1 is not a valid Win32 application.

    is not a valid Win32 application.

    is not a valid Win32 application.

    is not a valid Win32 application.

    B.

    The Remote Access Connection Manager service terminated with the following error:

    Remote Access Connection Manager is not a valid Win32 application.

    Besides that there is a problem with the new AccessPoint that is stuck on: "loading content". If that has to do with the Windows Authentication, which some one mentions in connection with a IIS setup, how do we correct that in a setup with a QV Web Server? Or could it bee .NET Framework 4 related, that is: version 4 is not the one being used?

    The later problem with "loading content" could be related to the first QVS-instability, I guess.

    The is no firewall between the 2 windows servers.

    DB:2.38:Qvs Service Instable, Disconnected But Running. 93


    Hi Colin.

    Yes, we tried to rename all relevant QV-folders.

  • RELEVANCY SCORE 2.38

    DB:2.38:Qvs Error - "Document Became Obsolete While Loading - Retrying" fa



    I've posted this a few months ago, now I thought I give it another try.

    I have problem with the Qvs / Qv Publisher - as soon as a user tries to open a document (after Qvs restart) the Qvs event log is filled with the following phrase;

    " Document XXXXX became obsolete while loading - retrying"

    After a few minutes the event log is really big (100mb) and it dont stop until i stop Qvs.

    I think it has something with Publisher and maybee nfts rights, because if i stop all the Publisher services everything works fine when i try to open the documents. I talked to QT support, they talked about the IQVS_servername account, but that didn't help this time (I've seen this error earlier).

    Im running latest 8.5 relase.

    DB:2.38:Qvs Error - "Document Became Obsolete While Loading - Retrying" fa


    Interesting. We are seeing the same "obsolete" error followed by QVS filling all available memory on our server (200GB including Virtual Page file), and then dumping everything and starting over.

    How did you "give 'domain users" ftfs rights to list the Published folder"?

    Thanks! Tyler

  • RELEVANCY SCORE 2.37

    DB:2.37:Ocx And Forms sf


    Hello,

    maybe some persons have a solution of it. We use a ListView in forms which are running fine, but it seems that forms is really instable by using ocx elements. If youo want to close the form then forms crashed and create a ifrun60 dump. Thats really terrible.

    Maybe somebody knows why it alwys happened so often.

    DB:2.37:Ocx And Forms sf

    Crashes in Forms that use OCX are usually because there are some OLE resources still in use when the Form is closed.
    You should make sure that you call release_obj (or OLE2.Release_Obj) to free up your references to the OCX before you exit the Form.

  • RELEVANCY SCORE 2.37

    DB:2.37:Qvs 11 In On Domain User In Other Domain 8d



    Hi!

    The QVS is installed on a severin in domain A.

    Users logs in on the computers in domain B.

    There is no user trust betwene domain A and B.

    Have added the domain B in Directory Service Connection both AD and Configurable LDAP.

    I can browse the users in domain B under User Management in QMC.

    But the problem is that I cant login with user from domain B (from computer i domain B) to the AccessPoint.

    What's wrong?

    /Otto

    DB:2.37:Qvs 11 In On Domain User In Other Domain 8d


    Hi,

    Remember there are two parts to this Authentication which decides who you are and then authorization is what you have rights to.

    When you use the QMC you are only looking at who you can assign a document two. This has nothing to do with the login. To handle that you will have to write some type of SSO webpage to handle this for you. You can do this using Headers are tickets, but this is outside of QlikView.

    Bill

  • RELEVANCY SCORE 2.37

    DB:2.37:Qlikview Settings Service Is Down Own Its Own.. ---- Why??? md



    Hi All

    I want to ask why my QVS Service is down on its own.

    I have restarted the QVS Services. It is working fine now. But I want to ask why this has happened....???

    Kindly see the Attached Image.

    Regards

    Aviral Nag

    DB:2.37:Qlikview Settings Service Is Down Own Its Own.. ---- Why??? md


    Nag,

    It could be various reasons, I recommend to check the logs that will give you pretty good idea what could cause the service to drop.

    Default location for Qlikview server logs:

    C:\ProgramData\QlikTech\QlikViewServer

    Also I would check the windows application and system event logs:

    ( this is on windows) Open server manager Diagnosticswindows logs application and system.

  • RELEVANCY SCORE 2.37

    DB:2.37:Memory Allocation On Qvs 9 ck



    We are running QVS 9.0 x64 under W2K8 x64 server on an ESX server with 4gb memory allocated to the VM.

    Are there any operating system or QVS considerations for the allocation of 4gb memory to the VM?

    DB:2.37:Memory Allocation On Qvs 9 ck


    Already deployed many systems with 16GB on vmware systems without problems, of course memory have to be present and available for the virtual machine on the vmware host.Remember that vmware tools, immediately after a system restart, execute a memory test using the baloon driver and fill all available memory to force windows to swap unecessary memory page on disk, this means that your virtual machine will use ALL memory you have configured on startup for 30 seconds circa.

  • RELEVANCY SCORE 2.37

    DB:2.37:Minimum Security Requirements For Qvs 10 91



    I have been looking for documentation regarding the minimum Security requirements for the Service Account that QVS10 uses and have not been able to locate anything. Does anyone have that document, or can point me in the right direction? I have found the QV9 document, but we run QV10.

    Thanks,

    Nate

    DB:2.37:Minimum Security Requirements For Qvs 10 91


    This is exactly what I was looking for. Thank you very much.

    Nate

  • RELEVANCY SCORE 2.37

    DB:2.37:Gt70 0nc-494 Sata 3 Issue s9




    Hi guys,

    i have this laptop for almost an year and Im tired of trying to fix this issue by myself. i installed a SSD (OCZ Vertex 4 256GB) on the sata 3 port and moved the HD to the SATA 2, but when i finished the windows installation the system got instable and restarted with less the 10 minutes (sometimes i cant even finish the windows installation).
    So i gave up and switch the drivers, SSD on sata 2 and HD on sata 3, works fine, but only with half speed. I already tried to switch the drivers after windows installation, but it gets instable the same way.
    All the firmware are up to date, such as the drivers and windows.
    What else can i do?
    Im running windows 8 pro, pretending to upgrade to 8.1

    thank you a lot.

  • RELEVANCY SCORE 2.37

    DB:2.37:Cisco Secure Acs V3.2 Under W2k - Supported Service Pack jp



    Cisco´s official statement about supported Service Packs for ACS 3.2 under Windows 2000 is:

    "The computer running Cisco Secure ACS use an English-language version of Windows 2000 Server with Service Pack 3 installed."

    Is SP 4 also meanwhile supported?

    If not at the moment, does anybody have a roadmap when this will be supported?

    Is anybody running ACS 3.2 under W2k SP4 although officially not supported, and can provide me with experiences (runs, runs instable, runs partially, does not run ) ?

    DB:2.37:Cisco Secure Acs V3.2 Under W2k - Supported Service Pack jp


    ACS 3.2(1) is currently supported with Win2K SP4.

    When ACS 3.2(2) is released (should be in 2-3 weeks) , the release notes will specify this.

    Meanwhile, if you ask TAC , they'll tell you SP4 is now supported with ACS 3.2(1).

  • RELEVANCY SCORE 2.37

    DB:2.37:Charges For Temporarily Disconnected Service? sk



    My phone has been temporarily disconnected for non payment about a month ago. But I am wondering why I was charged for last months service still when it was disconnected?

    DB:2.37:Charges For Temporarily Disconnected Service? sk







    Hi kait330! I understand no one wants to have to pay for service theyre not using. Id be more than happy to ensure youre not being billed for disconnected service. Tell me, when is your bill cycle date? This would be the last day of each bill cycle; found on your My Verizon homepage under My Usage. What day were your services suspended for non-pay? Keep in mind; charges are billed one month in advance, so you may very well receive a credit for the days the line was not active when the next bill prints. Let me know so I can further assist. Thanks!

    AnthonyTa_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • RELEVANCY SCORE 2.37

    DB:2.37:Qds Status Started On Server But Disconnected On Qemc kj



    Have an issue with QEMC running with load sharing on two physical servers, Qlikview Distribution Service will show started on server but shows as disconnected on QEMC Services tab. Restarting the service corrects the problem, but does not correct the root cause for the disconnection.Any Idea on what could be causing this behavior?

    DB:2.37:Qds Status Started On Server But Disconnected On Qemc kj


    The client resolved the issue by reconfiguring the load sharing on their servers.

  • RELEVANCY SCORE 2.37

    DB:2.37:Google Maps Are Not Working On Server cx



    Hi All,

    In one of my application i incorporated the google map using API. the map is working fine when i open qvw file in my local PC but i am not able to see the map on server. i can see the bubbles on scatter chart but google map is not appearing. I checked and made sure that The Windows Account running the QVS service have internet access . Could you anyone suggest is there any other settings do i need to modify to work google maps on server?

    Thanks for your help in advance.

    DB:2.37:Google Maps Are Not Working On Server cx


    Any news about this problem??

    Tanks

    Renato Barbosa

  • RELEVANCY SCORE 2.37

    DB:2.37:Sloooow Reports mk



    Hello,

    I just installed the 9.0 versions of QV, QVP QVS, but besides other problems, my reports are running very slow. The charts and everything else seems OK, but the reports are killing the CPU, not using too much RAM and very very slow... Anyone any ideas why is that like that?

    DB:2.37:Sloooow Reports mk


    Hello,

    I just installed the 9.0 versions of QV, QVP QVS, but besides other problems, my reports are running very slow. The charts and everything else seems OK, but the reports are killing the CPU, not using too much RAM and very very slow... Anyone any ideas why is that like that?

  • RELEVANCY SCORE 2.37

    DB:2.37:Change Location Of Distribution Log Files ? px



    Server 9 sr2, Distribution service is saving Distribution log files to C:\ProgramData\QlikTech\Publisher\Qlikview Distribution Service\1\...

    I dont want these on the c drive for obvious reasons, How do I change the Location, there is an option to move the QVS logs in the qemc console but there doesnt seem to be any config options for the Distribution service (scheduled Reloads). Is there an XML Config File anywhere ?

    ColinR

    DB:2.37:Change Location Of Distribution Log Files ? px


    Note that if you want to move the location of the QlikView WebServer log files you must create a file called QVWebServer.exe.config in the directory C:\Program Files\QlikView\Server\Web Server. This file should contain:

    ?xml version="1.0" encoding="utf-8"?configuration appSettings !-- ****** General ****** -- !-- Defaults to %PROGRAMDATA%\QlikTech\WebServer -- add key="ApplicationDataFolder" value="C:\YourDirectoryPath" / /appSettings/configuration

  • RELEVANCY SCORE 2.37

    DB:2.37:Partial Reload In Qvs 11 mf



    HI Experts,

    I would like to execute partial reload in QVS 11 , but I do not know how to set.

    Is partial loadding possible?

    Would you please teach me how to partial loading in QVS 11?

    Regards

    Kenji

    DB:2.37:Partial Reload In Qvs 11 mf


    Hi,

    Thanks for your cooperlation.

    I would like to know how can partial reload be shcheduled.

  • RELEVANCY SCORE 2.37

    DB:2.37:Accesspoint Slow To Display Dashboards After Qvs Reboot ad



    Hi gurus

    Environment :

    2 X clustered QlikView 10 SR4 servers

    3 X QlikView 10 SR4 Access Points running on IIS 7.5

    Problem :

    After a reboot of the QVS servers it will take 19 seconds to log onto each of the Access Points after that.

    After performing some investigation with Qliktech we have discovered that the w3wp.exe (IIS worker process) holds the connection to the QVS open even though the server has been rebooted. This is due to the application pool worker process idle timeout being set to 20 minutes.

    When the QVS is rebooted and another login has been initiated from the AccessPoint this will force the tcp connection held open by the worker process to the QVS to timeout (19 seconds) and logins will be immediate as before.

    The only way to solve this is to recycle to application pool on each of the AccessPoints after the QVS servers are rebooted.

    Is it possible to setup IIS in a 'web garden' configuration with multiple worker processes so the single worker process is not a bottleneck ?

    Has anyone came across this before ? I am currently working with Qliktech to solve but just wanted to know if anyone else had a similar problem ?

    Thanks

    DB:2.37:Accesspoint Slow To Display Dashboards After Qvs Reboot ad


    Hi gurus

    Environment :

    2 X clustered QlikView 10 SR4 servers

    3 X QlikView 10 SR4 Access Points running on IIS 7.5

    Problem :

    After a reboot of the QVS servers it will take 19 seconds to log onto each of the Access Points after that.

    After performing some investigation with Qliktech we have discovered that the w3wp.exe (IIS worker process) holds the connection to the QVS open even though the server has been rebooted. This is due to the application pool worker process idle timeout being set to 20 minutes.

    When the QVS is rebooted and another login has been initiated from the AccessPoint this will force the tcp connection held open by the worker process to the QVS to timeout (19 seconds) and logins will be immediate as before.

    The only way to solve this is to recycle to application pool on each of the AccessPoints after the QVS servers are rebooted.

    Is it possible to setup IIS in a 'web garden' configuration with multiple worker processes so the single worker process is not a bottleneck ?

    Has anyone came across this before ? I am currently working with Qliktech to solve but just wanted to know if anyone else had a similar problem ?

    Thanks

  • RELEVANCY SCORE 2.37

    DB:2.37:Distribution Service Disconnected 89



    After installing QV Server 9 SR1, two services are "disconnected" - directory Service Connector, and Distribution Service.Both services are running. In fact, all Qlikview services are running.I cannot schedule reload. There is a "reconnect" button on the Reload page to reconnect Distribution Service, but it doesn't connect.Nothing special in the Event Viewer.Log file for Distribution Service says in last line "...Qlikview Distribution Service v9.0.7257 is up and running..."

    What can be wrong?

    Appreciate any hints.

    DB:2.37:Distribution Service Disconnected 89


    Hi,

    We are also getting the same issue on windows server.

    As per the suggesion here I have tried to delete the .xml file but that s not available in the path

    c:\programdata\qliktech\Qlikview Distribution Service.

    Hence kindly help us on this and tell me for what reason this issue will come.

    Regards,

    Bindu

  • RELEVANCY SCORE 2.36

    DB:2.36:How To Delete A Task From Qvs ?? x7



    How to delete a task from QVS ??

    I to remove it from DocumentsUser Documents QVS model.qvw ??

    I have already remove it from DocumentsSource documents QDS model.qvw

    but it is not going from QVS ...

    Need Help..

    DB:2.36:How To Delete A Task From Qvs ?? x7


    You should delete the file from User Documents as well

  • RELEVANCY SCORE 2.36

    DB:2.36:Question About Setting Accesspoint In Iis Qv Web Server cd



    Hi,

    I install QVS 9 on Windows Server 2008R2 (X64) with IIS7 (IIS 7).

    Follow the Qvs Reference Manual, I set up IIS7. But I get problem in 4.4 QlikView Web Service and Microsoft IIS, in page 50 I cannot connect to accesspointsetting.aspx. Below is is some firuge:

    Qvs Reference Manual page 50

    The error on my qvServer:

    Is there something wrong in my IIS setting? What should I do now?

  • RELEVANCY SCORE 2.36

    DB:2.36:Qvs Drops Users Abruptly If A Chart Is Cpu Intensive And Many Users On It 3k



    Has anyone faced an issue where QVS drops the connection with the client if many users are on a chart that is CPU intensive and many users on it.

    Seems like only 1-2 users are able to get in and get results but others get 0.00 and are disconnected from the session. Very odd behavior. Wish there was a graceful error message or if it at least waited in turn (multi-threading wise) to get results for other users.

    This is specifically in v9 SR 4

  • RELEVANCY SCORE 2.36

    DB:2.36:Qvs 10, Webparts With Sharepoint 2010 a9



    Hi,

    I'm getting the following error "unexpected end of file with parsing name has occurred. line 2, position 10" when running the Webparts x64 on my sharepoint server. I have QVS and Sharepoint installed on the same server and the QVS all works fine on its own. I now want to install the webparts functionality but this error turns up. I can click OK and the installer continues except when it gets to the window to select the sharepoint server, the drop down is empty i.e. it doesn't seem to recognize my Sharepoint install and I cannot progress past this point.

    Am I missing something here?

    Regards

    Ashley

    DB:2.36:Qvs 10, Webparts With Sharepoint 2010 a9


    Hi Ashley,

    you're probably facing this same problem like I did: http://community.qlik.com/forums/p/39048/157284.aspx#157284

    Solution is that your account need more rights to access Sharepoint DB.

    BR

    Dusan

  • RELEVANCY SCORE 2.36

    DB:2.36:Qvs Installation c9



    Dear All,

    Installed QlikView server in client side but problem is in that URL wat i sent is not able to access by the client.Am running in out of time.

    Please give me a solution as soon as possible.

    Thanks in Advance

    Regards,

    Sri

    DB:2.36:Qvs Installation c9


    Watever I will Chk it Yar... Thnks fr ur kind reply.

    Thanks Regards,

    Sri

  • RELEVANCY SCORE 2.36

    DB:2.36:Change Setting Value. (Qvs) x9



    hi~

    i want to use QVSservice API

    so I need change QMC setting.

    now QMC - System - Management Service -General

    location url is http://Servername:4799/QMS\Service.

    but i want change servername - IPaddress.

    How can i do this?

    please let me know~

    Thanks in advance

    DB:2.36:Change Setting Value. (Qvs) x9


    hi~

    i want to use QVSservice API

    so I need change QMC setting.

    now QMC - System - Management Service -General

    location url is http://Servername:4799/QMS\Service.

    but i want change servername - IPaddress.

    How can i do this?

    please let me know~

    Thanks in advance

  • RELEVANCY SCORE 2.36

    DB:2.36:Failed To Connect To Qlikview Server df



    Hi all,

    I found this warning in QMC:

    WarningFailed to connect to QlikView Server. This error is most likely because the server is not contactable or that the account the QlikView Distribution Service is running as is lacking permissions. Address=wgeadl36qsc001:4747, Exception=System.Net.Sockets.SocketException (0x80004005): A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond
    at QlikTech.NetClient.QvClient.GetMessageDataFromSocket(Byte[] buffer, Double timeout)

    at QlikTech.NetClient.QvClient.GetMessageSizeFromSocket(Double timeout)

    at QlikTech.NetClient.QvClient.Open()

    at QVSWrapper.QlikViewServer..ctor(Action`2 i_Logger, String i_Hostname, Int32 i_Port, Mode i_Mode, Boolean i_Https)

    at QlikTech.QlikViewServerConnection..ctor(Action`2 i_Logger, String i_Address, String i_Username, String i_Password)

    at QlikTech.QVSHelper.GetQlikViewServerConnection(String i_ForPath, String o_RelativePath, String i_Username, String i_Password)
    WarningCould not connect. Type=QlikView Server, Path=qvp://wgeadl36qsc001/. Exception=System.Exception: Could not connect! Path=qvp://wgeadl36qsc001/ --- System.Exception: GetQlikViewServerConnection returned null
    at QlikTech.DMS.Connect(String i_Path)

    --- End of inner exception stack trace ---

    at QlikTech.DMS.Connect(String i_Path)

    at QDSMain.FileSystemPluginHelper.CreateInstanceOfPluginHandlingPath(ILogBucket i_LogBucket, String i_Path, String i_Username, String i_Password, LogMessage i_LogMessage, LogFileProgress i_LogFileProgress)
    WarningFileSystem Plugin was not found - No operations will be executed! Path=qvp://wgeadl36qsc001/WarningCould not connect to QVS. QVS=qvp://wgeadl36qsc001/WarningCould not connect. QVS=qvp://wgeadl36qsc001/InformationTrying to distribute. QVS=qvp://wgeadl36qsc002/
    [cut]
    InformationPerformance data (CopyFile): Connecting to QVS. (0), DMSAccessRules=2 (0), Uploading file: AL_VT_01_FCVita/AL_VT_01_FCVitaFull.qvw (16), Write complete. (1094656 bytes processed) (187)WarningQVS Distribution failed to distribute to one or more nodes in the QVS Cluster, but one node completed with success. NodeCount=1WarningDistribution reported warnings for resource "AL_VT_01_FCVitaFull_QVS_1" (QlikViewServerDistributionResource). Warnings=6WarningDistribution to resources reported warnings. Warnings: 7

    Environment:

    structure with 2-node server cluster and publisher. Please see attached files.

    I found same warning for many scheduled documents. I try to reload right now some qvw from QMC and warning appears again.

    It depends on what? Thank you

    DB:2.36:Failed To Connect To Qlikview Server df


    One of two nodes failed distribution.

    What happens if you use Open in Server in your QV Desktop, and you try to connect to qvp://wgeadl36qsc001/ using the Service account name and password?

    Best

    Peter

  • RELEVANCY SCORE 2.36

    DB:2.36:Vcenter Keeps Showing Everything "Offline" And "Disconnected" 8s



    Running 3.5 on several hosts with vCenter. things keep being thrown offline or disconnected. Hosts actually say "not responding" and VMs show "disconnected" If I restart the primary service, it comes back online for a while, but then happens again.

    What should I check?

    DB:2.36:Vcenter Keeps Showing Everything "Offline" And "Disconnected" 8s


    Some thoughts:
    check the host's Management Network settings (including the gateway address, DNS server settings)double check proper DNS name resolution for the hosts as well as vCenter Serverdisable HA for the cluster, and then re-enable it to let it reconfigure the hosts

    Andr

  • RELEVANCY SCORE 2.35

    DB:2.35:Export To Excel\Cvs Problems 39



    Hello,

    We are running QV9 SR2 and we have some problems when exporting to Excel or QVS. We actually know what the solution is but don't know how to fix it.

    The Users use IE to connect to QV and the data, when the navigate around the url gives the FQDN or full name of the server i.e. Server.group.faa.gov. But when we go to export a file or qvs the pop up page that shows them the data or asks them to download the excel sheet only shows "servername/qvprint/xxxxxxxx.xls or xxxxxxx.cvs.

    And then it says "page cannot be displayed". If we manully put in the rest of the FQDN "group,faa,gov" and refresh it works.

    So does anyone know how to change the output to keep the FQDN when exporting an Excel or QVS?

    Thanks,

    Moe

    DB:2.35:Export To Excel\Cvs Problems 39


    Hi,

    Use below macro to exort all the sheet objects on excel, just change sheet name with yours

    'Export objs to excelTestsub ExportBitmapExcel2dim str1ActiveDocument.Sheets("PG EIR").ActivateAllSet objExcel = CreateObject("Excel.Application")objExcel.Visible = Trueset s=ActiveDocument.Sheets("PG EIR")objExcel.Workbooks.Addfor i=0 to s.NoOfSheetObjects-1 s.SheetObjects(i).Activate nextfor i=1 to s.NoOfSheetObjects-1str1 = "CH0" iActiveDocument.GetSheetObject(str1).CopyBitmapToClipboardobjExcel.ActiveSheet.Pastenextif err.number 0 then msgbox "Error occured "end ifend sub

  • RELEVANCY SCORE 2.35

    DB:2.35:Qvs 10 Disconnected - Failed To Create Account 89



    Hi everybody!

    I'm trying to install QVS 10, but the QVS is still disconnected after a lot of instalations..

    Looking on log, I found these messages:

    Server Started Timestamp SeverityID EventID Severity Message

    2011-08-02 15:30:23 2011-08-02 15:30:25 1 300 Error Account: Failed to create account IQVS_COMPANY, Acesso negado.

    (Error Code : 5 (NERR_BASE + -2095)).

    2011-08-02 15:30:23 2011-08-02 15:30:25 1 300 Error Account: Failed to create account IQVS_COMPANY, Acesso negado.

    (Error Code : 5 (NERR_BASE + -2095)).

    2011-08-02 15:30:23 2011-08-02 15:30:25 1 300 Error Logon: Failed acquiring token for anonymous access

    Guys.. What priviliges I have to give to solve this problem? I installed using one account in Admin group on machine. To use the 'top dog' admin role, I have to known that it is the real problem. (Information Security)

    The other services work fine... but the QVS still down..

    I have Win2003 Server R2 SP2.

    Thanks

    DB:2.35:Qvs 10 Disconnected - Failed To Create Account 89


    Guys...

    I almost solved it!

    After reinstall some times, I put the admin user to QVS logon and the others services with other user as Admin and QlikView Admin roles.

    But some services still are disconnected.. I don't know why, but the acess point access works fine.

    I still guess the real problems is the accounts from networks, or the AD roles.

  • RELEVANCY SCORE 2.35

    DB:2.35:Couldn't Start Qlikview Web Server Service kj



    Hi,

    I installed QVS 9 SR2,

    the services running exept the wlikview web server,

    there is no iis on the machine,

    but anytime i try to start the web sever service it failed,

    whith the massage:

    the service started and than stop....

    Can somone help

    thenks...

    but ant

    DB:2.35:Couldn't Start Qlikview Web Server Service kj


    Look in windows services..in properties..logon..is in "This account" an administrator account?

  • RELEVANCY SCORE 2.35

    DB:2.35:64-Bit Installation Problems V8.5 7d



    I'm reposting this becuase I was at a fellow user's desk when I posted it and I wouldn't get email notifications.

    I'm trying to get the 64-bit QVS Server installed on a test 64-bit Windows Server 2008 box that previously had the 32-bit version installed on it in conjunction with our product. I uninstalled that first, cleaned out any remaining files and registry keys related to the server installation, and ran the installer with the same option selections we used for 32-bit (only installing the QVS Server and Mgmt Console, installing QVS under our products folder instead of Program Files\QlikView). After installation, I go the the Mgmt console, and the service is not listed as running, and the location of the exe is blank. I set the location of the file, then use the registration process to set up my license, and configure my document folder. When I close down Mgmt Console and go back in again, my changes have been lost, and the server location is not listed as running and blank. I verified that the service is listed as running under Administrative Tools- Services, and have verified Administrator's membership in the QlikView Administrators group.

    If I try to uninstall QlikView and start again, the uninstall process is unable to complete because of a timeout trying to shut down the service. I have to disable the service and restart the system before I can uninstall.

    I am using 8.50.6231.5 (to stay in sync with out 32-bit install), but have tried the later builds of 8.5 with the same issue.

    Can someone provide guidance?

    DB:2.35:64-Bit Installation Problems V8.5 7d


    Check these two area of the registry.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\QlikViewServer\ImagePath

    See if the correct server path is there and check

    HKEY_LOCAL_MACHINE\SOFTWARE\QlikTech\QlikView\Install\ExePath

    to make sure it is there

    let me know

  • RELEVANCY SCORE 2.34

    DB:2.34:Multiple Qvs Off-Line Due To Domain Controller / Ad Group Changes mk



    I hope someone can assist or has experienced a similar issue:

    We have 3 Enterprise Qlikview Servers running on VM's - all are currently experienceing the same issue relating to their internal authentication (not the authentication of Users):

    In the Q(E)MC's the Services are all showing as ok apart from the 'Qlikview Server' that shows as 'Disconnected' (All the Services are running), when we try to access the License tab everything greys out and we are left with the message 'Server Is Down', most of the other pages within the consoles are also unavailable.

    This appears to be related to wider amends that have been made to our Domain Controllers and / or AD Group policies.

    I have managed to get the servers running so as they can serve documents to users by amending the relevant Config.xml file to use 'NTLM' authentication instead of 'Negotiate' however the Q(E)MC issue persists along with the fact that we can't shedule / admiister tasks and documents and the existing tasks aren't sucessfully reloading.

    I'm in contact with Qliktech Support but they are at a loss to explain what the QVS is trying to do to point us in the direction of the issue.

    Below is an extract from the 'Management Service' log file:
    ...

    DB:2.34:Multiple Qvs Off-Line Due To Domain Controller / Ad Group Changes mk


    Already tried / checked all those things.

    This doesn't appear to be a 'QVS Issue' but until we know what the QVS is trying to do that results in the errors we can't identify what to fix.

    The amends to the AD Groups / Domain Controllers have been inherited from above so our DBA's aer unsure as to whats changed.

    Thanks for the suggestions.

    Matt

  • RELEVANCY SCORE 2.34

    DB:2.34:Server Restart - Phoenix Detected s1



    I had the following error message appear several times in my QVS events log...

    120 Error Server aborted trying to recover by restart. Reason for restart: Phoenix detected: Performance monitor stuck

    Does anyone know what this is? The server restarted each time, but there wasn't any significant CPU or Memory load on the system at the time. The server is QVS v9 SR5 running on Windows Server 2008.

    Any assistance is appreciated,B

    DB:2.34:Server Restart - Phoenix Detected s1


    Further to earlier answers, I experienced this error once this month on a server (11.0.11440.0 64-bit) and it was simply caused by a network outage. I suspect the message logged at 4.27am may actually have been at the end of a timeout as it coincides at approximately 8 hours after the network initially dropped which corresponds with my document timeout of 480minutes, or possibly 150 minutes after my nightly attempt to restart the services (although cannot find that setting).

    flipside