• RELEVANCY SCORE 4.03

    DB:4.03:Are Host Files Containing The Virtual Disks Encrypted? 9c





    Are host files containing the virtual disks encrypted when you select to encrypt a virtual machine, or does encryption encompass virtual machine configuration files only?

    DB:4.03:Are Host Files Containing The Virtual Disks Encrypted? 9c


    Diskmount is a command line tool used to mount a vmdk on the host as a local disk. It is not able to mount an encrypted vmdk. But it is not needed anymore as you can now do the same operation with a simple right click on the virtual disk and select "Map Virtual Disk"...

    Franck

  • RELEVANCY SCORE 3.85

    DB:3.85:Virtual Machine Startup/Shutdown fx





    Is it possible to script the configuration of Virtual Machine Startup/Shutdown on a ESXi host?

    Thanks

  • RELEVANCY SCORE 3.81

    DB:3.81:Jboss 4.2.3 Virtual Host Configuration aa





    Hi,I'm trying to configure a Web Service on a virtual host using the @WebContext annotation. However, I know that there is an issue "JBWS-981 Virtual Host configuration for EJB endpoints" that ignores the virtualHosts parameter of the @WebContext annotation. This is fixed in JBossWS native 3.0.3 and JBoss 5.I would like to know if there is some workaround to configure the virtual host in JBoss 4.2.3. I updated to JBossWS 3.0.3 but no success. Maybe with some XML configuration instead of the annotation?Thank you!

    DB:3.81:Jboss 4.2.3 Virtual Host Configuration aa


    I have the same problem (JB AS 4.2.2). JBossWS 3.0.5 is not deployed to the server.My web service class has:// start@Name("myWS")@Stateless()@WebContext(virtualHosts = {"my.virtual.host"}, contextRoot = "/services"@WebService(name="myWS", serviceName="myWS")public class MyWSBean {}// endaccessing http://my.virtual.host/services/MyWSBean?wsdl fails, while http://localhost:8080/services/MyWSBean?wsdl works.

  • RELEVANCY SCORE 3.73

    DB:3.73:Virtual Hosts 404 Not Found 1x



    Hi all ,

    I have to set up a virtual host on CE7.2

    I configure it on "SAP NetweaverAdministrator" -- "Java HTTP Provider Configuration"

    virtual hosts name : share_folder

    root directory : /share -- all user and group can access (local directory)

    aliases : test_share

    after complete configuration.

    I access this virtual host by

    http://server:port/share_folder

    or

    http://server:port/test_share

    all response "404 not found"

    Can you give me suggestion.

    DB:3.73:Virtual Hosts 404 Not Found 1x


    Hi all ,

    I have to set up a virtual host on CE7.2

    I configure it on "SAP NetweaverAdministrator" -- "Java HTTP Provider Configuration"

    virtual hosts name : share_folder

    root directory : /share -- all user and group can access (local directory)

    aliases : test_share

    after complete configuration.

    I access this virtual host by

    http://server:port/share_folder

    or

    http://server:port/test_share

    all response "404 not found"

    Can you give me suggestion.

  • RELEVANCY SCORE 3.70

    DB:3.70:Azure Virtual Machine - Are They Still In Preview Or Now Live sf


    I plan to host production sites using Virtual machines in the Azure cloud. Need to know if this would be a supported configuration

    DB:3.70:Azure Virtual Machine - Are They Still In Preview Or Now Live sf

    Using the VM for hosting IIS webpage is supported as long as it's an issue with the VM or the platform itself. When we hit GA, support may change but as of now it does not sound like an unsupported scenario but I cannot say for sure.
    Thanks!
    Patrick [MSFT]

  • RELEVANCY SCORE 3.63

    DB:3.63:Suggest A Configuration 18



    Scenario: Virtual session of Windows 2003 Server running on host which also runs 2003 Server. One hardware NIC, connected to the LAN with a static public address. The virtual server has IIS and is a web server, so I believe the virtual server should also have a static IP, as well as the web server in IIS. Will some kind soul suggest how to configure the virtual adapters to accomplish this? Thank you so much.

    DB:3.63:Suggest A Configuration 18


    What about configuration of the VMWare virtual adapters (VMNet1, VMNet8), DHCP and NAT?

  • RELEVANCY SCORE 3.62

    DB:3.62:Rac Using Qfs On Sun Solaris 10 -Vip Configuration a3


    Hi DBA's

    how to create Virtual IP address in Virtual Box?

    I just add in the host file my IP address but i am not able to Ping the Virtual IP address
    My host file is as follows. Kindly guide me how to create Virtual IP Address?

    bash-3.00# cat /etc/hosts
    #
    # Internet host table
    #
    ::1 localhost
    127.0.0.1 localhost
    192.168.1.10 rac1.orademo.com rac1
    192.168.1.11 rac2.orademo.com rac2
    192.168.0.10 rac1-priv.orademo.com rac1-priv
    192.168.0.11 rac2-priv.orademo.com rac2-priv
    192.168.1.12 rac1-vip.ordemo.com rac1-vip
    192.168.1.13 rac2-vip.orademo.com rac2-vip
    192.168.1.100 rac-scan.orademo.com rac-scan
    192.168.1.6 win
    bash-3.00#

    Regards,
    SG

    DB:3.62:Rac Using Qfs On Sun Solaris 10 -Vip Configuration a3

    Hi;

    Please follow below steps

    http://onlineappsdba.com/index.php/2007/07/09/step-by-step-build-rac-part-1-install-vmware-and-linux/ click next, you will see how you can create it

    Regard
    Helios

  • RELEVANCY SCORE 3.60

    DB:3.60:Virtual Infrastructure - Configuration At Core/Access Switch xd



    Hello,

    Please help understand below points

    --To implement a virtual infrastrucure with ESX host and virtual machine running in different VLAN - what configuration is required at core/access switch.

    --If virtual infrastrucutre needs to communicate to servers which are behind firewall - what changes needs to be done at firewall/core/access switch side

    --Any special requirements for communicating with servers in DMZ domain

    Please help

    Amul

    DB:3.60:Virtual Infrastructure - Configuration At Core/Access Switch xd


    The simplest method is just treat your virtual machines as you would physical machines and configure your core switches accordingly insuring the p orts are configured for the approriate vLANs - the same holds true for communicating thwough a firewall and to machines in the DMZ -

    If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful

  • RELEVANCY SCORE 3.59

    DB:3.59:How To Fix: Error (10698) The Virtual Machine () Could Not Be Live Migrated To The Virtual Machine Host () Using This Cluster Configuration. pj


    I am unable to live migrate via SCVMM 2012 R2 to one Host in our 5 node cluster. The job fails with the errors below.

    Error (10698)
    The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.

    Recommended Action
    Check the cluster configuration and then try the operation again.

    Information (11037)
    There currently are no network adapters with network optimization available on host.

    The host properties indicate network optimization is available as indicated in the screen shot below.

    Any guidance on things to check is appreciated.

    Thanks,
    Glenn

    DB:3.59:How To Fix: Error (10698) The Virtual Machine () Could Not Be Live Migrated To The Virtual Machine Host () Using This Cluster Configuration. pj

    I've done more reading and came up with a solution that I think will work for us until we get more components of System Center online.
    A named VMNetwork can be used provided the Logical Network has a Network Site defined with all of the VLANs needed to be used by the VM's defined. Setting all of those up made me miss the Trunk all VLANS button in VMM 2008 R2.
    http://technet.microsoft.com/en-us/library/jj983727.aspx was one of the more helpful pages for me to understand the networking changes with SCVMM 2012 R2.
    Hopefully this dialogue will help someone else someday.

  • RELEVANCY SCORE 3.59

    DB:3.59:Unable To View Templates x8


    Hello everybody.

    Please help out a rookie here...I recently setup Virtual Center 2.5 w/SQLexpress configuration for temporary purpose until we got our new hardware to host Virtual Center. I had built several virtual machines from a couple of templates I created. Now onto our new hardware...I installed SQL2005 and Virtual Center 2.5. Using Virtual Infrastructure client interface, I can see all host, virtual machine, etc. except for the templates I created (yes, I did change my views to "Virtual Machines and Templates"). I can see the template files in the storage area. Any ideas? Can you help?

    Thank you,

    Steve

    DB:3.59:Unable To View Templates x8

    No prob. HTH.

    Note: If you find that your questions posted on the forums are answered helpful, please mark them as such.

    Regards, J

  • RELEVANCY SCORE 3.55

    DB:3.55:Virtual Host pf


    What do we mean by Virtual Host and Document root??

    DB:3.55:Virtual Host pf

    virtual hosts and document root (in this case) are to do with server settings,

    when a browser is directed to a web page it interrogates the DNS (which you set up with your network connection) for the IP address where the web site can be found, there may be more than one domain at that IP#, so for a proper HTTP request there is a Host field in the headers.

    HTTP servers are written to read that header and serve files from an appropriate directory, aka the document root

    as for "what has this to do with java", im guessing the OP is configuring tomcat or writing an HTTP server...

  • RELEVANCY SCORE 3.54

    DB:3.54:Need To Configure Wildcard Subdomains For A Virtual Host In sf



    Hi,is there any chance to configure a virtual host in JBoss 5.1 to redirect any subdomain to one configured virtual host. Examples of the subdomains:sub1.domain.tldsub2.domain.tldsub3.domain.tldsubn.domain.tldThe goal is to read a subdomain as configuration element in a servlet filter and give the caller his personal view to the application in ervery request. But unfortunately the Alias alement can't handle wildcards:

    Host name="vhost-name" autoDeploy="false" deployOnStartup="false" deployXML="false"
    Aliasdomain.tld/Alias
    Alias*.domain.tld/Alias
    /Host

    DB:3.54:Need To Configure Wildcard Subdomains For A Virtual Host In sf


    Hi,is there any chance to configure a virtual host in JBoss 5.1 to redirect any subdomain to one configured virtual host. Examples of the subdomains:sub1.domain.tldsub2.domain.tldsub3.domain.tldsubn.domain.tldThe goal is to read a subdomain as configuration element in a servlet filter and give the caller his personal view to the application in ervery request. But unfortunately the Alias alement can't handle wildcards:

    Host name="vhost-name" autoDeploy="false" deployOnStartup="false" deployXML="false"
    Aliasdomain.tld/Alias
    Alias*.domain.tld/Alias
    /Host

  • RELEVANCY SCORE 3.53

    DB:3.53:Unable To Create Virtual Machine On Vmware From Scvmm 2012 s9


    Hi Expers,

    I have add the vCenter Servers EXS 4.1 Host in SCVMM 2012. Certficate import and ESX host status is OK.
    Now I am trying to create the VM's from SCVMM 2012 to ESX, It's getting two error on Host Ratings Explanation :

    Configuration issues related to the virtual hard drive configuration with ID [b6cb4e23-d3e3-4c7f-9659-7e716529d257] of virtual machine [hh] prevent deployment.
    Update placement or determine an appropriate host for this virtual machine and try the operation again.
    ID: 23721
    Please help me on the same..
    Shambhu

    DB:3.53:Unable To Create Virtual Machine On Vmware From Scvmm 2012 s9

    Are you using VMware templates for the new VM ? if you are trying to deploy VHD files to VMware host you may get that errorMohamed Fawzi | http://fawzi.wordpress.com

  • RELEVANCY SCORE 3.53

    DB:3.53:Problem When Migrate Ms Exchange To Virtual Machine 9a



    Hi,

    I have a SMTP node defined in my Solution Manager which send mails to external MS Exchange host without problems.

    There is a project for migrate Exchange to a virtual machine. When I modify the SCOT configuration for send mails to new virtual host, i get an error connection message.

    I check the exchange relay for my SAP machine and it looks right. There is no problems with net connections between sap system host and exchange host.

    Is necesary any special configuration or adaptation in SAP when migrate exchange server to a virtual machine???

    Thanks for all.

    DB:3.53:Problem When Migrate Ms Exchange To Virtual Machine 9a


    @Chetan,

    Sorry... but how are those links related to the problem?

  • RELEVANCY SCORE 3.53

    DB:3.53:Different Certificates In Different Virtual Host For The Same Server 98


    Hi, I'm using a server with a number of virtual hosts. Anyone knows if I can set a ssl configuration, that means, a different ssl certificate for each one???

    Thx

    DB:3.53:Different Certificates In Different Virtual Host For The Same Server 98

    Hi, I'm using a server with a number of virtual hosts. Anyone knows if I can set a ssl configuration, that means, a different ssl certificate for each one???

    Thx

  • RELEVANCY SCORE 3.52

    DB:3.52:Host Self-Rename At Virtual Center Reboot f9



    Hi all,

    has anyone experienced with a virtual center behavior/trouble, such after a reboot it merges host displayed name loosing correct configuration link? That is, it renames all machine applying a (1) at the end.

    Thanks.

    DB:3.52:Host Self-Rename At Virtual Center Reboot f9


    Upgrade to VC to the latest version (1.3.1 patch 1), and that should solve the problem.

  • RELEVANCY SCORE 3.51

    DB:3.51:Can Vmesxi5 Be Virtual Machine? s8



    Hi, All

    I have two physical ESXi hosts with ESXi5.0 installed. However, our physical servers just have one physical NIC card.

    Because we want to test some functions such as vMotion, HA, we tried to intall two ESXi5.0 on our physical ESXi hosts

    as virtual machine. So we can have multiple virtual NICs on our virtual ESXi hosts, After that, we added two shared

    datastore to these virtual ESXi hosts. Finally, we succeed to configure vSphere HA by using these two virtual ESXi host

    without configuration problems.

    We tried to create virtual machines on one virtual ESXi host and poweron the virtual machine but It failed with the attached

    picture of 1.JPG which told us that CPU does not support the poweron. I know that it is due to the reason of creating virtual machine on virtual

    ESXi host and choose 64bit OS for the virtual machine. I have the first question as follows.

    Q1. I wonder if it is possbile to poweron 64bit virtual machine which is created on virtual ESXi host?

    (※I can poweron 32 bit virtual machine os which is created on virtual ESXi host.)

    Sencondly, we tried to test vSphere HA by manually stopping one virtual ESXi host, but we found that the virtual machine on it

    will not failover to another virtual ESXi host, So I have the second question as follows.

    Q2. Is it must to poweron virtual machine on virtual ESXi host before doing vSphere HA test? We think vSphere HA is the function

    to monitor the status of virtual machine and vSphere will restart all virtual machines on failed virtual ESXi host?

    DB:3.51:Can Vmesxi5 Be Virtual Machine? s8


    Note: Discussion successfully moved from VMware ESXi 5 to Nested Virtualization

  • RELEVANCY SCORE 3.49

    DB:3.49:How To Access Linux Machine With The Putty On Host . s9



    Hi , I am new to this virtualization. I have managed to install linux on virtual machine (host is windows ) but not able to access this virtual machine with the putty on windows . Can anyone let me know what are the network configuration need to be done for this .

    DB:3.49:How To Access Linux Machine With The Putty On Host . s9


    --If you are using Bridged or Host-only networking on the Guest, and both host and guest are pingable from each other, you should be able to access SSH with Putty no problem. Try turning off any Firewall in the Guest.

    ./. If you have appreciated my response, please remember to apply Helpful/Correct points. TIA

  • RELEVANCY SCORE 3.48

    DB:3.48:Virtual Machine Configuration jp



    in VMware fusion 6, when using Windows 8.1 I get the following message when attempting to open a URL: " Make sure the virtual machine's configuration allows the guest to open host applications"

    How do I deal with this please?

    Thanks,

    Ron West.

    DB:3.48:Virtual Machine Configuration jp


    That did it! Thank you for this info.

    Ron

  • RELEVANCY SCORE 3.48

    DB:3.48:Virtual Host Weblogic 10 3c


    How a virtual host assumes an application by defult?
    In version 8 was:
    VirtualHost DefaultWebApp="postMed" Name="nombre"
    Targets="portalServer" VirtualHostNames="www.url.cl"/

    In version 10?

    virtual-host
    namenombre/name
    targetAdminServer/target
    virtual-host-namewww.url.uchile.cl/virtual-host-name
    /virtual-host

  • RELEVANCY SCORE 3.47

    DB:3.47:Hyper-V Virtual Server Wont Connect To The Internet. dd


    Hi,
    I've just setup my first Hyper-V virtual PC with Windows 7 Home Premium installed on the virtual host. I've setup a Virtual Switch and added it to the VM, but the VM is not even detecting the connection let alone connecting to the internet.
    I've attached screenshots of my configuration, any help would be apprechiated!

    DB:3.47:Hyper-V Virtual Server Wont Connect To The Internet. dd

    Because you have a Physical server the hyperV host with that adapter and now a VM usingthe same adapteryou have two devices on that WAN network, does you ISP allow more than one computer connected to the WAN, i'm assuming WAN means it's the public
    internet not a firewall plugged into a switch and the server also plugged into switch i.e. a LAN.
    The proper way to connect only a VM directly to public internet is to do exactly what you did but disable the virtualLAN adapter on the hyper v host, this prevents public access to your hyperv host.
    Because tis machine has only one adapter it's not likely it's running as your firewall so my assumption may be totally off.

  • RELEVANCY SCORE 3.45

    DB:3.45:Networker Licencing For Virtualization zs


    HiWe have got a Vmware ESX Cluster of 8 Hosts machines.When creating a Virtual Client in Networker, I must enter the physical machine host name.My problem is that the virtual machine may be moved from one physical host to another (Vmotion, DRS, HAS)so I can not really affect it to a specific host.Should I only declare my 8 hosts as Networker Clients, and no matter to which one I declare each virtual client?Or is this important that each virtual client does run on the physical host which was declared in virtual client configuration?

  • RELEVANCY SCORE 3.45

    DB:3.45:Virtual Vcenter ? dx



    I had someone suggest putting the vcenter on a virtual server to manage the vm's on the same host that this virtual vcenter would be on. Is this supported configuration? Are there any advantages/disadvantages or other issues with this configuration?

    DB:3.45:Virtual Vcenter ? dx


    As other people mentioned it is supported. Lots of the same pro's/con's as the physical vs. virtual comparison. One thing to watch out for is making sure you can bring things up in an order where everything works. With DNS/DHCP before active Active Directory etc. Have vCenter run on 1 specific server typically the first host, so you know exactly where it is so you don't have to connect to 5-10 Hosts to find it if your running it from within the cluster. Or better run it from a second cluster or esxi server so its outside of the "management domain". As when there is issues with storage or networks with that cluster, its better for vCenter to be outside of that so it can still be running and manage what's going on.

  • RELEVANCY SCORE 3.45

    DB:3.45:Nested Virtual Machines fa



    Hi

    I am having an issues with the following configuration:

    Host: ESXi 5.0

    Guest Windows 7

    VMware Workstation Version 9.0.2

    When trying to power on a virtual machine in vmware workstation in the Windows 7 guest we get the following error:

    Running Vmware Workstation in a Virtual Machine requires the outer virtual machine to be configured as a Vmware ESX guest operating system. You cannot power on a virtual machine until the outer virtual machine is reconfigured.

    I have seen some conflicting resources on line on how to resolve this.

    Any help would be great.

    Thanks.

  • RELEVANCY SCORE 3.45

    DB:3.45:What's The Virtual Machine Configuration Maximum On An Esxi 4 Host? 3x



    What's the virtual machine configuration maximum on an ESXi 4 host?

    Unless I am reading this wrong, this document is very misleading for example we can't add more than 4 vCPU to an ESXi virtual machine.

    http://www.vmware.com/pdf/vsphere4/r40/vsp_40_config_max.pdf

    DB:3.45:What's The Virtual Machine Configuration Maximum On An Esxi 4 Host? 3x


    We want umlimited vCPUs for testing purposes. We want to test our server under different OSs and CPU/Memory configurations. (Does it run correctly under 2, 4, 8, 16, 32, 48 processors on Windows 2003, 2008, and 2008R2.) Virtualization allows us to use 1 48 CPU server by configuring the VM's via VSphere control panel.

  • RELEVANCY SCORE 3.45

    DB:3.45:Weblogic Virtual Host Configuration 7p


    Hi,

    Can anyone explain to me what is virtual host.

    what is the significance and purpose of the same.

    in what scenario should we configure a virtual host.

    and what is the benefit of the same.

    from the documentation i did not understand the concept.

    Thanks in advance.

    DB:3.45:Weblogic Virtual Host Configuration 7p

    This should help

    http://weblogic-wonders.com/weblogic/2010/05/18/configuring-virtual-hosts/

  • RELEVANCY SCORE 3.45

    DB:3.45:Dpm On A Virtual Host 1j


    HI there,
    I'm wanting to install DPM on a clustered virtual host, this is because it is by far the most suitable computer we have - however I need to know if that is a really Bad Idea(tm) for some reason or an unsupported configuration to have it on a clustered computer
    or on a virtual host - or both!

    DB:3.45:Dpm On A Virtual Host 1j

    http://technet.microsoft.com/fr-fr/library/ff399554.aspx
    DPM is designed to run on a dedicated, single-purpose server. The DPM server should not be installed on any of the following:

    A computer on which the Application Server role is installed

    A computer that is a System Center Operations Manager management server

    A computer on which Exchange Server is running

    A computer that is a node of a cluster

  • RELEVANCY SCORE 3.44

    DB:3.44:Host-Only Virtual Network To Host-Only Virtual Network fz



    hello all

    is there anyway for a vm on one host-only virtual network to talk to a vm on a different host-only virtual network

    regards

  • RELEVANCY SCORE 3.42

    DB:3.42:Hyper-V Virtual Switch Configuration File? dc


    Where is the Hyper-V Virtual Switch configuration stored?
    By that I mean if its stored in a config-file somewhere on the host itself or if its stored in the registry.
    I've been researching this without a clear answer.

    Knowledge is power.

    DB:3.42:Hyper-V Virtual Switch Configuration File? dc

    If you have Hyper-V 2012 you can use the PowerShell to document the current virtual switch configuration - the switch and its settings and physical NIC attachment, then loop through each vNIC and document its configuration and associated vSwitch.
    the vNIC is unique from the vSwitch and is associated with the VM. There are capabilities of the vSwitch that depend on the capabilities of the physical NIC, thus binding it to hardware and a machine.
    Like I mention, you can use the PowerShell to document it, or to get the object and serialize it, but you cannot simple re-hydrate it and have it work on a different Hyper-V Server.
    And, you could also, dump the configuration parts that matter to a CSV and then write a script to create a switch and then link all the appropriate VMs (based on the configuration you dumped).
    Any way you do it, there is an investment in scripting.
    And, if you are not using 2012, then you have WMI.

    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • RELEVANCY SCORE 3.41

    DB:3.41:Virtual Center 2 With Two Esx 2.5 And One Esx 3.01 zc



    Hi,

    i have upgrade our virtual center from 1.2 to 2.

    now i see my two esx host with virtual center but don't see the configuration tab.

    also i can not add an esx 3.0.1 host with an host based licence file.

    error=not enozgh licence. what it is?

    under licences in vc i see ESX Server Standard Cost 1/CPU Package, Remaining 8 and Total 8

    DB:3.41:Virtual Center 2 With Two Esx 2.5 And One Esx 3.01 zc


    yes i have, and under the esx 3.01 host i see licenced for 4 cpus

  • RELEVANCY SCORE 3.40

    DB:3.40:Need Help!! Error Ethernet Card (Bridged) f1



    i need your helps about a error of the configuration bridged "(The virtual machine may not be able to communicate with the host or with other machines on your network.)"

    DB:3.40:Need Help!! Error Ethernet Card (Bridged) f1


    OK

    VMware workstation 6

    SO (windows server 2003 enterprise edition)

    the guest SO (windows XP SP2)

    is host conected network /internet (Cable ethernet, DSL)

    the resques od ipconfig/all is:

    Ethernet adapter Local Area Connection:

    Connection-Specific DNS Suffix:

    Description..............................: VMware Accelerated AMD PCnet Adapter

    Physical Address.....................: 00-0c-29-66-55-E8

    DHCP Enabled.........................: No

    IP Address..............................: 190.75.71.175

    Subnet Mask...........................: 255.255.224.0

    Default Gateway.....................: 190.75.64.1

    DNS servers............................: 200.44.32.12

    200.11.248.12

    How view the file .vmx ??

  • RELEVANCY SCORE 3.40

    DB:3.40:Logical And Virtual Host Name sj



    Hi,

    Please help me to understand "what is virtual host and logical host"?

    I got the following definition from scn but not getting exactly.
    A 'Virtual host' designates a simulated host running for example on top of a VMware.A 'Logical host' designates a network/host configuration which associates a physical host with one or more additional host names and dedicated IP addresses. This is used, for example, to be able to move systems from one physical host to another.

    Please help me to understand by giving simple example.

    Thanks and Regards,

    Akshay Jagtap


    DB:3.40:Logical And Virtual Host Name sj


    See the picture:

    Logical names: hanahost1, hanahost2

    Virtual: hanahost3

  • RELEVANCY SCORE 3.40

    DB:3.40:Time Synchronization Esxi With My Virtual Machines 7j



    Hi

    i have a prolem .

    i have more than 100 virtual machine on my esxi host 5.1 i added ntp server and in Configuration Tab / time configuration my time and date is ok but when i create new virtual machine and installed on Vmwae tools and tik this box synchronize guest time with host but time of my virtual machine is not sync with esxi

    how can solve yhis problem?

    Best regards

    Babak

    DB:3.40:Time Synchronization Esxi With My Virtual Machines 7j


    i am confused i want sync my vms time with esxi host without login to my virtual machines and chnage timezone or ..... but you say the host and the VM are in the same timezone i don't want login to machines i have just installed vmware tools on my machines can i sync all of my vms with esxi host without login to vms and change manually?

  • RELEVANCY SCORE 3.40

    DB:3.40:Missing Host Configuration Information zj


    I have several targets that are on HP-Itanium virtual servers. OEM cannot seem to get any of the Host Configuration information (i.e. operating system, hardware platform, CPU's etc). When you view the Host Configuration tab, the following is displayed. I performed the below, but all I get are errors.

    Error

    Error displaying host configuration - Host Configuration not found. Check to see if the target exists. Check to see that the Management Agent is running and try refreshing the host by clicking on the Refresh button. If the host configuration does not display, click Help for more information about refreshing host configuration. Host Configuration not found.

    My boss is wild to get this information. Anybody have any thoughts?

    John

  • RELEVANCY SCORE 3.39

    DB:3.39:Gsx 3.2 -- Virtual Switch Limits mk



    Does anyone know what the virtual switch limit is for GSX 3.2 server running on RedHat Linux Enterprise 3? This link:

    http://www.vmware.com/support/gsx3/doc/network_component_gsx.html

    says that the limit is 100 but my initial testing seems to indicate it is 10 like on Windows. If the limit is 100, then is the only way to assign virtual networks over 10 to a virtual host is editing configuration files?

    DB:3.39:Gsx 3.2 -- Virtual Switch Limits mk


    Probably not directly. Internally it is bug 14014...

    If you are really adventurous, you can stop using vmnet-dhcpd, and instead you can enable dhcp server built into vmnet-natd (by setting "enableNatDhcp = 1" in "\[host]" section in nat config). If you are using (lots of) natd. This server should not have any problem with random subnet masks, on other side it is as RFC compliant as Linux Windows need, but not single line of code more...

  • RELEVANCY SCORE 3.39

    DB:3.39:Vmware Compliance 1j



    I'm trying to build a component template that checks for the "sync time to host" of VMs running on ESX.

    the object is located at

    /ESX Host/Virtual Machines//Options/Advanced/Configuration Parameters/tools.syncTime

    my problem is checking for all virtual machines, not a specific one.

    I've tried with

    /ESX Host/Virtual Machines/*/Options/Advanced/Configuration

    /ESX Host/Virtual Machines/**/Options/Advanced/Configuration

    both in the part section as well as in the rule itself with no success.

    How can I iterate through all the configured VMs on each host?

    DB:3.39:Vmware Compliance 1j


    i think that you will have to identify the possible instances that exist on all of your hosts, then specifically associate an instance w/ a host (discovery), then run your compliance against each instance.

    see:

    https://www.bladelogic.com/community/thread.jspa?threadID=3239

  • RELEVANCY SCORE 3.37

    DB:3.37:Auto-Deploy And Host-Profiles pp



    What part of auto-deploy configures the following setting in host-profiles?

    Networking configuration - Host virtual NIC - switch : vnic : management - Stateless boot properties for virtual NIC

    For some reason, when I update my host-profile from the reference host, it sets my VLAN to 200. However, my vmknic has no VLAN... it's native (to allow PXE). I have to keep manually changing this back to '0' to disable it in the host profile.

    Thoughts?

    DB:3.37:Auto-Deploy And Host-Profiles pp


    What part of auto-deploy configures the following setting in host-profiles?

    Networking configuration - Host virtual NIC - switch : vnic : management - Stateless boot properties for virtual NIC

    For some reason, when I update my host-profile from the reference host, it sets my VLAN to 200. However, my vmknic has no VLAN... it's native (to allow PXE). I have to keep manually changing this back to '0' to disable it in the host profile.

    Thoughts?

  • RELEVANCY SCORE 3.37

    DB:3.37:Applience And Host Os dz



    Hello,

    Is it poosible that virtual applience consists of 2 parts:

    \- virtual applience by tself;

    \- host OS installtion/configuration script.

    There are some ideas (for example Multi PC (one PC emulates 2 or more PCs with extra i/o pysical devices)), but this require host OS configuaration (like VM-to-monitor binding, input devices-to-VM binding etc.).

    Also there are some more ideas for virtual appliences, but almost each require additional software for host OS.

    Is it acceptable?

    DB:3.37:Applience And Host Os dz


    Hello,

    Is it poosible that virtual applience consists of 2 parts:

    \- virtual applience by tself;

    \- host OS installtion/configuration script.

    There are some ideas (for example Multi PC (one PC emulates 2 or more PCs with extra i/o pysical devices)), but this require host OS configuaration (like VM-to-monitor binding, input devices-to-VM binding etc.).

    Also there are some more ideas for virtual appliences, but almost each require additional software for host OS.

    Is it acceptable?

  • RELEVANCY SCORE 3.36

    DB:3.36:Vmware Server (Free Version) Cpu Support f3


    Hi all,

    I wanna know-be sure that vmware server (the free version) supports physical CPUS (32-bit, 64-bit) on host system, and how many virtual CPUS you can have on the virtual machines and if you can make specific configuration of the physical CPUS to the virtual machines.

    Regards

  • RELEVANCY SCORE 3.36

    DB:3.36:Virtual Disk Consistency Error Due To The Linux Virtual Machine Virtualization Host Location ? 78


    Environment
    - windows server 2012 r2 Hyper-v failover clustering configuration
    Installing CentOS 6.5 as a guest OS
    Virtual machine is up on clustering , that information and virtual disk in the CSV .for the virtual machine .
    1 of 1 showed the data virtualization in a virtual machine when there is a CentOS virtual machine on a host , the data of one of the virtual machine does not look after migrating to twice the virtualization host .

    Do you have any experiences you had one of the above ? The workaround ?

    DB:3.36:Virtual Disk Consistency Error Due To The Linux Virtual Machine Virtualization Host Location ? 78

    Environment
    - windows server 2012 r2 Hyper-v failover clustering configuration
    Installing CentOS 6.5 as a guest OS
    Virtual machine is up on clustering , that information and virtual disk in the CSV .for the virtual machine .
    1 of 1 showed the data virtualization in a virtual machine when there is a CentOS virtual machine on a host , the data of one of the virtual machine does not look after migrating to twice the virtualization host .

    Do you have any experiences you had one of the above ? The workaround ?

  • RELEVANCY SCORE 3.36

    DB:3.36:Virtual Host Multi Configuration Problem kj


    We are trying to move all of our servers to the SUN App Server where each server has many virtual hosts using the smae application.

    My problem is that I start each instance of my application for each virtual host using a ServletContext init() and need different configurations for each virtual host (like if you wanted each virtual server to point to a separate database
    , ect ect) but I can't figure out a way to pass a unique config file name or get the virtual host name from the init method.

    So when I add a new virtual host, it starts perfectly, but it has no way of knowing which config file to load. Does anyone know how to dynamically pass the virtual host name through the web.xml (using like ${host} or something like that) or start the application another way without using a servlet.

    I can do this in all other app servers I have tried using tricks (like in Resin you add a new folder for each virtual host and I can parse out that folder name to get the host name which I can use to find a unique config file)

    Any help would be appreciated - otherwise I have to ditch SUN and go with something else.

    DB:3.36:Virtual Host Multi Configuration Problem kj

    exactly what are you trying to do ? also, will it be possible to try it out with web server 7 - because unlike web server 6.1, web server 7 is compliant with java ee 5 servlet container

  • RELEVANCY SCORE 3.36

    DB:3.36:How To Recover Lost Configuration File For Virtual Machine In Esx 3.0.1 ? km



    After adding the ESX 3.0.1 host into management server, one of my virtual machine was showing disconnected and in the event, the reason was shown " No configuration file found for this VM" .. Now what should I do to retrieve this configuration file?

    Any help is highly appreciated..

    Thanks,

    Ketal

  • RELEVANCY SCORE 3.36

    DB:3.36:Ha Agent On Esxi Host In Cluster Nam In Gdc Virtual Data Center Has An Error: Cannot Complete The Ha Configuration Error 4/9/2013 7:18:47 Am Reconnect Host kp



    VMware cluster operational status shows me the below:-

    ESXi host : Secondary Role : HA Issue - HA agent on ESXi host in VMware cluster in the Virtual Data center has an error: Cannot Complete the HA configuration.

    Any help is highly appreicated!!!

    DB:3.36:Ha Agent On Esxi Host In Cluster Nam In Gdc Virtual Data Center Has An Error: Cannot Complete The Ha Configuration Error 4/9/2013 7:18:47 Am Reconnect Host kp


    is this the first time you are trying to configure HA on this Host or has it worked before ?

    I would suggest you to check from scratch follow VMware article

  • RELEVANCY SCORE 3.35

    DB:3.35:Feature Ejb Endpoints jf



    Hello!Could you make some examples for following feature? * [JBWS-981] - Virtual host configuration for EJB endpoints

    DB:3.35:Feature Ejb Endpoints jf


    package org.jboss.test.ws.jaxws.jbws981;

    import javax.ejb.Stateless;
    import javax.jws.WebService;
    import org.jboss.wsf.spi.annotation.WebContext;

    @Stateless
    @WebService
    (
    serviceName = "EndpointService",
    targetNamespace = "http://www.jboss.org/test/ws/jaxws/jbws981",
    endpointInterface = "org.jboss.test.ws.jaxws.jbws981.EndpointInterface"
    )
    @WebContext( virtualHosts = { "localhost", "www.jboss.org" } )
    public class EJB3Bean implements EJB3RemoteInterface
    {
    public String hello(final String message)
    {
    return message;
    }
    }

  • RELEVANCY SCORE 3.35

    DB:3.35:Apache Virtualhost _Default_:443 In Httpd-Ssl.Conf mz



    Why we need virtual host in httpd-ssl.conf configuration? I just cannot understand.

    _default_ reffers to 127.0.0.1 or what?

    DB:3.35:Apache Virtualhost _Default_:443 In Httpd-Ssl.Conf mz


    Default is used when no vhost claims a request for a certain IP. In other words, this is the configuration that is going to be used when you add an IP to your server and the server has no configuration for that IP yet.

  • RELEVANCY SCORE 3.35

    DB:3.35:Packet Loss On Virtual Machine Bus Network Adapter 8f


    I have Windows 2008 R2 virtual server that is running on a 2008 Hyper-V host. I see packet loss when I use a Virtual Machine Bus Network Adapter on the virtual server. For example, a continuous ping to another system will drop several pings.
    However, if I use a Legacy Adapter instead I don't see any loss, even with the same IP configuration,the same physicial NIC on the host,etc. Is there some setting on the virtual adapter that might cause this?
    Thanks,
    Ken

    DB:3.35:Packet Loss On Virtual Machine Bus Network Adapter 8f

    Yes i have read that other are having issues as well. Do you knwo of any solution to this? Changing that actual CPU's to the 55xx seriesseems like the only thing I have discovered that will correct tthis.

  • RELEVANCY SCORE 3.34

    DB:3.34:Manage Server 2008 + Virtual Server 2005 With Vmm2008 mm


    Now that 2008 is supported as a host operating system for VS2K5, is there a way to add a host server running that configuration into VMM 2008?  If done from the GUI VMM will enable the Hyper-V role and add it has a Hyper-V host.  Can the Add-Host cmdlet be used to do this?  Is it supported?
     
     

    DB:3.34:Manage Server 2008 + Virtual Server 2005 With Vmm2008 mm

    Hi,
     
    Server 2008 is not supported in VMMv1 (2007).
     
    http://technet.microsoft.com/en-us/library/bb740951.aspx
     
    -matt
     

  • RELEVANCY SCORE 3.34

    DB:3.34:Configure Certificate Ssl Wildfly Https dm



    I need configuration a certificade ssl to my virtual host, but i dont found nothing to explain do this..

    How to configure wildfly virtual host with https certificate?

    DB:3.34:Configure Certificate Ssl Wildfly Https dm


    see Undertow (web) subsystem configuration - WildFly 8 - Project Documentation Editor

  • RELEVANCY SCORE 3.34

    DB:3.34:Unfenced Deployment And Host Spanning c3



    So I have a configuration that requires all of the VMs to reside on the same host, for traffic spanning to work. The configuration uses physical networks that are not fenced - as a result, after they deploy I have to create DRS rule on the cluster to keep all the VMs together. The issue is host spanning, which says:

    Host Spanning allows configurations with virtual machines using virtual networks or fenced physical networks to be deployed across multiple hosts. This option does not affect configurations on physical networks that are not fenced; these are always allowed to span multiple hosts.

    Is there a way to configure an unfenced configuration to deploy all VMs to the same host? Creating rules works ok, but it's tedious if I'm undeploy/redeploying the configuration frequently (which we are)

    DB:3.34:Unfenced Deployment And Host Spanning c3


    You cannot specificy an unfenced configuration to use a specific host. Note ... anything that is unfenced and uses physical networks technically doesn't use the 'host spanning' feature. It just uses your physical network.

    The reason that we can dictate a fenced configuration to stay on one host is by creating a vMotion restriction. When we deploy fenced to one host, the Port Group is created on a single ESX host ... therefore all VMs using that port group must be on a single ESX host. Then DRS complies by moving the runtime of the VMs arounda accordingly.

    In the case of an 'unfenced' configuration, the network port group already exists on all hosts since it would use the physical network.

    If you deploy a configuration 'unfenced' with a virtual network, it will deploy to a single host ... but won't have network connectivity without the 'Connect Virtual To Physical' enabled during deployment.

    Best Regards,

    Jon

  • RELEVANCY SCORE 3.34

    DB:3.34:Ha Error. Message: Misconfiguration In The Host Network Setup. 9a


    Hi,

    I have a configured cluster with 2 hosts. (ESXi4 and VC 4.0) I installed virtual machines, it's working, and i can ping management network for all host, but when i configure HA, i get the following message: Cannot complete the configuration of the HA agent on the host. See the task details for additional information. Misconfiguration in the host network setup.

    Have ideea what is wrong?

    DB:3.34:Ha Error. Message: Misconfiguration In The Host Network Setup. 9a


    Check in the task history to see the reason for the configuration problem.

    See also this KB:

    http://kb.vmware.com/kb/1003691

    Be sure that your have shared storage, a pingable default gateway, that your can ping each COS IP, that DNS resolution is working fine, ...

    Also you will have (when HA comes up) a warning cause you lack of redoundancy on COS interface.

    Andre

  • RELEVANCY SCORE 3.34

    DB:3.34:How Many Virtual Marchine Can Be Host? mc


    I had a server with the following configuration, wondering how many clients marchine can i host on it. No need to take in the consideration of the disk space, space can supply via iSCSI server.

    Host Server Spec:

    2 x Xeon E5520

    48Gb Memory

    2.1Tb Local SAS Storage

    ESXi 4.0

    Client VM Spec:

    Windows Server 2008 x64

    4Gb Virtual memory

    DB:3.34:How Many Virtual Marchine Can Be Host? mc

    If you have an existing environment you are thinking of virtualising your best bet is to do some capacity planning. Use a tool such as Novell Recon to gather data from the servers you wish to virtualise. You will then be able to create scenarios with your hardware spec to properly work out how much hardware you need to have in your vmware environment to host the servers.

  • RELEVANCY SCORE 3.34

    DB:3.34:Conflicting Network Maximums In Documentation 9s


    The configuration maximums document states a max of 127 virtual switches per physical host, however the Vmware virtual networking concepts document states 248 virtual switches ?

    Which one is correct?

    DB:3.34:Conflicting Network Maximums In Documentation 9s

    I found this same error when I was studying for my VCP. I went with the configuration maximum as that had the most recent updated date on the document.

    I'm glad someone else has seen this. After all the reading I was doing I started to think I imagined it.

  • RELEVANCY SCORE 3.34

    DB:3.34:Changing The Host For A Virtual Machine On A Cluster And Host Is Not In Complaince With The Attached Profile zm



    Hi all,

    I have 02 questions.

    1. We have a cluster which has 02 physical hosts (Host1 and Host2). On the Cluster we have 02 virtual machines. DRS enabled on the cluster.

    But the problem is my 02 virtual machines are always stays on a Host2. Few weeks ago each VM was on on each host. How do I place each virtual machine on each host for the best performance.

    How do I this?

    2. I connect to the cluster using vSphere client 5.1, Under Host Summery I get the following message

    "Configuration issues: Host is not in complaince with the attached profile"

    I suspect this is the case for my question 1 ?

    Many Thanks

    DB:3.34:Changing The Host For A Virtual Machine On A Cluster And Host Is Not In Complaince With The Attached Profile zm


    Hi,

    I think found the answer for the Host profile problem. I changed the following values to 1 for each host at configurations Under Software Advanced Settings

    Under DataMover

    HardwareAcceleratedInit

    HardwareAcceleratedMove

    Under VMFS3

    HardwareAcceleratedLocking

    Then the compliance status came back to green.

    Thanks for the tips guys!

    Thanks

  • RELEVANCY SCORE 3.34

    DB:3.34:Virtual Server Question 1a


    I have downloaded the Microsoft Virtual PC 2007 SP1 on my laptop, the specs are ok, but I am getting this message:not running on a supported operating system please see microsoft virtual pc for a list of host, virtual pc might work but configuration will not be supported.any idea why?thanks

    DB:3.34:Virtual Server Question 1a

    The message is not a problem, it is only a notification, that the OS is not directly supported.So if you have issues, you will get no support from Microsoft - and that's it, what the message is telling you.Best greetings from GermanyOlaf

  • RELEVANCY SCORE 3.34

    DB:3.34:Can't Connect My Virtual Machine To The Network xd



    Hello,

    My platform is; Host OS WinXP SP3, VMWare Workstation 6.5.2, Guest OS Win2003 R2 SP2

    When I start the virtual machine all looks fine but I can't make a network connection

    The virtual machine is using a bridged configuration (the VM is not in the domain of the host OS)

    What can I check or do to solve this issue?

    Best regards.

    DB:3.34:Can't Connect My Virtual Machine To The Network xd


    Hi,

    I got the password, did you know wath change I need to do in the HIPS admin screen?

    Regards,

  • RELEVANCY SCORE 3.34

    DB:3.34:Apache And Jboss With Virtual Host c3



    Hi,I try to have the following set-up:Apache virtual hosts:domain1.com - 80domain2.com - 8080Currently, my configuration redirects all domains to JBOSS!Anyone with some experience?Thanks.DvJ

    DB:3.34:Apache And Jboss With Virtual Host c3


    Hi,I try to have the following set-up:Apache virtual hosts:domain1.com - 80domain2.com - 8080Currently, my configuration redirects all domains to JBOSS!Anyone with some experience?Thanks.DvJ

  • RELEVANCY SCORE 3.34

    DB:3.34:Problem With Virtual Network Manager - Host Connection Not Connected sx



    Hi all.

    I have a problem with virtual network manager. I have created virtual connections but after applying i lost the host connection and finally the virtual network connection is not created. could you help me please?

    when i try to connect the network on my Virtual machine i receive the following message:

    "The host-only adapter driver does not seem to be running. If you have not rebooted the host since installing the host-only network adapter, you need to do so before you can use this support. Otherwise, check the system Event Log for an explanation of why service VMnetAdapter did not startup properly.

    Failed to connect virtual device Ethernet0"

    i have reinstalled vmware workstation 10, restore the default configuration on virtual network editor etc etc...

    ps: screenshots attached

    DB:3.34:Problem With Virtual Network Manager - Host Connection Not Connected sx


    the network at my network connections is not created there is no network adapter ... i need to install host-only driver but reinstalling workstation the driver is never been installed

  • RELEVANCY SCORE 3.34

    DB:3.34:Generic Scsi Shared From Two Server In Cluster Configuration p7



    I add a TAPE like Generic SCSI device in Server1 and Server2.

    Server1 and 2 are Wondows Server 2003 in cluster configuration.

    But if I start both O.S. the Virtual machine that I start for second popup this message:

    Virtual device scsi0:5: Unable to open SCSI host device TAPE0. The device appears to be in use by another virtual machine.

    Virtual device scsi0:5 will start disconnected.[/i]

    Ok, is impossible shared the same TAPE for two different Virtual Machine? or exists a configuration. Is only read only like a CdRom?

    DB:3.34:Generic Scsi Shared From Two Server In Cluster Configuration p7


    I add a TAPE like Generic SCSI device in Server1 and Server2.

    Server1 and 2 are Wondows Server 2003 in cluster configuration.

    But if I start both O.S. the Virtual machine that I start for second popup this message:

    Virtual device scsi0:5: Unable to open SCSI host device TAPE0. The device appears to be in use by another virtual machine.

    Virtual device scsi0:5 will start disconnected.[/i]

    Ok, is impossible shared the same TAPE for two different Virtual Machine? or exists a configuration. Is only read only like a CdRom?

  • RELEVANCY SCORE 3.33

    DB:3.33:Can Not Create Virtual Host In Ohs kf


    How to create Virtual Host in OHS .
    I have tried to put

    NameVirtualHost *

    VirtualHost *
    DocumentRoot "/htdocs/mysite/htdocs"
    ServerName www.mysite.com
    /VirtualHost

    VirtualHost *
    DocumentRoot "/htdocs/mysite/leasing"
    ServerName lc1.mysite.com
    /VirtualHost

    to httpd.conf and restart OHS but it seemed the server configuration still the same

  • RELEVANCY SCORE 3.31

    DB:3.31:Detailed Explanation Of Privileges sk



    I have been reviewing the privileges for the roles in VC 2.0.1 and can guess what most of them do, but not all. We are going to create some custome roles in our environment, and I was wondering if anyone had a link to a doc that defines them in detail. These are the things I'm looking for detailed explanations on:

    1. Global

    Manage Custom Attributes

    Set Custom Attribute

    Log Event

    Cancel Task

    Licenses

    Diagnostics

    Settings

    VC Server

    2. Folder

    Create Folder

    Delete Folder

    Rename Folder

    Move Folder

    3. Datacenter

    Create Datacenter

    Remove Datacenter

    Rename Datacenter

    Move Datacenter

    4. Datastore

    Rename File

    Remove Datastore

    Browse Datastore

    Remove File

    5. Network

    Remove

    6a. Host Inventory

    Add Standalone Host

    Create Cluster

    Add Host To Cluster

    Remove Host

    Move Cluster/Standalone Host

    Rename Cluster

    Remove Cluster

    Modify Cluster

    Move Host

    6b. Host Configuration

    Connection

    Maintenance

    Virtual Machine Auto-start Configuration

    Hyper Threading

    Storage Partition Configuration

    Security Profile and Firewall

    Memory Configuration

    Network Configuration

    Advanced Settings

    System Resource Allocation

    Change SMNP Settings

    6c. Host Local Operations

    Add Host to VirtualCenter

    Manage User Groups

    Create Virtual Machine

    Delete Virtual Machine

    7a. Virtual Machine Inventory

    Create

    Remove

    Move

    7b. Virtual Machine Interaction

    Power On

    Power Off

    Suspend

    Reset

    Answer Question

    Console Interaction

    Device Connection

    Configure CD Media

    Configure Floppy Media

    Tools Install

    7c. Virtual Machine Configuration

    Rename

    Add Existing Disk

    Add New Disk

    Remove Disk

    Raw Device

    Change CPU Count

    Memory

    Add or Remove Device

    Modify Device Settings

    Settings

    Change Resource

    Upgrade Virtual Hardware

    Reset Guest Information

    Advanced

    Disk Lease

    7d. Virtual Machine State

    Create Snapshot

    Revert to Snapshot

    Remove Snapshot

    Rename Snapshot

    7e. Virtual Machine Provisioning

    Customize

    Clone

    Create Template From Virtual Machine

    Deploy Template

    Clone Template

    Mark As Template

    Mark As Virtual Machine

    Read Customization Specifications

    Modify Customization Specification

    Allow Disk Access

    Allow Read-only Disk Access

    Allow Virtual Machine Download

    Allow Virtual Machine Files Upload

    8. Resource

    Assign Virtual Machine To Resource Pool

    Apply Recommendation

    Create Pool

    Rename Pool

    Modify Pool

    Move Pool

    Remove Pool

    Migrate

    Relocate

    Query Vmotion

    9. Alarms

    Create Alarm

    Remove Alarm

    Modify Alarm

    10. Scheduled Task

    Create Tasks

    Remove Task

    Run Task

    Modify Task

    11. Sessions

    View and Terminate Sessions

    Global Message

    12. Performance

    Modify Intervals

    13. Permissions

    Modify Role

    Reassign Role Permissions

    Modify Permission

    DB:3.31:Detailed Explanation Of Privileges sk


    No problem.

    I'm sure the original guide was missing that section. It is worth re-downloading the docs to check if any new updates have been added.

    Glad it helped.

    Michael.

  • RELEVANCY SCORE 3.31

    DB:3.31:I Want An Easy Way To Mange Virtual Host cp



    Hello ,I am a PHP Developer , I have many Virtual Hosts to mange in my PC is there any script or program to add new , delete or edit virtual hosts domain configuration ?

    DB:3.31:I Want An Easy Way To Mange Virtual Host cp


    Hello ,I am a PHP Developer , I have many Virtual Hosts to mange in my PC is there any script or program to add new , delete or edit virtual hosts domain configuration ?

  • RELEVANCY SCORE 3.31

    DB:3.31:Migration Will Cause The Virtual Machine's Configuration To Be Modified m8


    when I try to migrate a vm from a 3.0.2 to a 3.5 esx host, i am getting this warning

    migration will cause the virtual machine's configuration to be modified, to preserve the CPU feature requirements for its guest OS.

    is it ok to migrate?

    DB:3.31:Migration Will Cause The Virtual Machine's Configuration To Be Modified m8


    Do you mean that a CPU mask will be added to the VMX config file for the VM?

    If so, what's the purpose of that?

    I got the same warning message when trying to migrate a VM from an ESX Server 3.0.5 U2 to an ESX Server 3.0.2 U2.

    The hosts have identical hardware (Dell PowerEdge 1950 with dual Intel Xeon 5150).

    Thanks.

  • RELEVANCY SCORE 3.31

    DB:3.31:Configuring Virtual Hosts On Jboss 7 38



    Hi all,

    I have an application running on JBoss 4.x which is configured to run virtual hosts. (The virtual hosts are contained in the Host section of server.xml and in jboss-web.xml). How do I port this to JBoss 7 ? just adding the alias in the virtual-server section seem not to work.
    virtual-server name="default-host" enable-welcome-root="true" alias name="localhost"/ alias name="myhost.com"/ /virtual-server
    am I missing something in the virtual host configuration ?

    Thanks

    Max

    DB:3.31:Configuring Virtual Hosts On Jboss 7 38


    Hi,

    you have to create a new virtual-server element and point it to the war module you want to use.

    If you don't set the web-module, jboss will use the default ROOT.war.

    So, if your war file is nameOfWarModuleWithoutDotWar.war, your virtual server configuration will be like below.

    subsystem xmlns="urn:jboss:domain:web:1.0" default-virtual-server="virtualServerName" connector name="http" protocol="HTTP/1.1" socket-binding="http" scheme="http"/ virtual-server name="virtualServerName" default-web-module="nameOfWarModuleWithoutDotWar" alias name="example.com"/ alias name="otherExample.com"/ /virtual-server /subsystem

  • RELEVANCY SCORE 3.30

    DB:3.30:Virtual Host Domain Configuration cc



    I'm having trouble setting up the virtual host configuration for my app when in domain mode on 7.1.0-Final. The app has no jboss-web.xml configuration file, and in both standalone and domain mode uses this configuration:

    subsystem xmlns="urn:jboss:domain:web:1.1" native="false" default-virtual-server="super-host"

    connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/

    virtual-server name="super-host" default-web-module="myapp-0.0.1-SNAPSHOT" enable-welcome-root="false"

    alias name="domain.com"/

    /virtual-server

    /subsystem

    In standalone mode, I can access the app at http://domain.com:8080/, but in domain mode it remains accessible only at http://domain.com:8080/myapp-0.0.1-SNAPSHOT/. How do I get rid of the context path in domain mode? Shouldn't I be getting the same behavior in domain/standalone mode?

    Also it would be appreciated if someone could first confirm this isn't simply a blunder on my part.

    Cheers!

    DB:3.30:Virtual Host Domain Configuration cc


    Hi,

    there ware many issues with this, most of them were addressed as part of AS7-3850 and JBPAPP-8216

    --

    tomaz

  • RELEVANCY SCORE 3.30

    DB:3.30:3 Vmware Configuration? ad



    i want ot realize the following virtual network on/inside one windows7 host computer:

    +------+ | | +------+ vmnet1| |vmnet2 +----+ +----+ | | | | +----+ +----+

    one VMWare with two network adapters, vmnet1 (host-only) and vmnet2 (host-only);one VMWare with one adapter, vmnet1 (host-only)one VMWare with one adapter, vmnet2 (host-only)

    I don't know how to correctly configure the two vmnet1 and vmnet2 on the host computer. Do I need some kind of virtual router or switch? Is there any crash tutorial on this issue?

    DB:3.30:3 Vmware Configuration? ad


    Do I need any virtual router/switch to specify network mapping/forwording for the three workstations?

    It would be more helpful if you'd diagram or detail your network layout however any system, physical or virtual, that is multihomed and you want network communication to pass between the different Subnets you need to route the trafic and how will depend on what OS is being used. So on the VM that has two network adapters, VMnet1 and VMnet2, if you need to communicate between them then you'll need to route the traffic between them.

  • RELEVANCY SCORE 3.30

    DB:3.30:Virtual Host Configuration af



    Hi!

    I try to configure a virtual host but it doesn't work. I have create it (name=myVirtualHost,
    virtual host names=gandalf.foo.com). I assigne it to my managed server (port 5021).
    In the managed server i have a web application calls "rings". If i type the url,
    gandalf.foo.com/rings/login : 404 not found error. BUT if i use gandalf.foo.com:5021/rings/login
    : it works.

    Can someone explain me what i do wrong?

    Regards

    Simon Pierre NOLIN

    DB:3.30:Virtual Host Configuration af

    Hi Simon

    You are not doing anything wrong. Setting up a virtual host has obviously
    worked as you can access it. You still have to specify the port number as
    it is not running on the standard port 80 that your browser assumes if you
    do not explicitly state it.

    regards
    Nick

    "Simon Pierre NOLIN" simon.nolin@sgam.com wrote in message
    news:3be7f4f1$2@newsgroups.bea.com...

    Hi!

    I try to configure a virtual host but it doesn't work. I have create it(name=myVirtualHost,
    virtual host names=gandalf.foo.com). I assigne it to my managed server(port 5021).
    In the managed server i have a web application calls "rings". If i typethe url,
    gandalf.foo.com/rings/login : 404 not found error. BUT if i usegandalf.foo.com:5021/rings/login
    : it works.

    Can someone explain me what i do wrong?

    Regards

    Simon Pierre NOLIN

  • RELEVANCY SCORE 3.29

    DB:3.29:Vs Host Based Clustering as



    Anyone successfully get Virtual Server to cluster at the host level? I have been thinking about setting up a linux drbd heartbeat configuration and running Virtual Server on top of it as an alternative to ESX.

    Has anyone accomplished something like this before?

    DB:3.29:Vs Host Based Clustering as


    Anyone successfully get Virtual Server to cluster at the host level? I have been thinking about setting up a linux drbd heartbeat configuration and running Virtual Server on top of it as an alternative to ESX.

    Has anyone accomplished something like this before?

  • RELEVANCY SCORE 3.29

    DB:3.29:Php Virtual Host Specific Settings 3s


    Hi,
    is possible to have some php settings defined differently fo
    virtual hosts ? Our global php configuration has safe mode
    enabled by default, but some virtual hosts need safe mode
    to be off.

    DB:3.29:Php Virtual Host Specific Settings 3s

    Hi,
    is possible to have some php settings defined differently fo
    virtual hosts ? Our global php configuration has safe mode
    enabled by default, but some virtual hosts need safe mode
    to be off.

  • RELEVANCY SCORE 3.29

    DB:3.29:Windows Server 2012 Failover Cluster Error: Cluster Resource Virtual Machine Configuration ... Of Type Virtual Machine Configuration In Clustered Role ... Failed. 11


    I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:

    Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
    When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
    Any suggestion on resolving this problem?

    Thanks
    Ikad

    DB:3.29:Windows Server 2012 Failover Cluster Error: Cluster Resource Virtual Machine Configuration ... Of Type Virtual Machine Configuration In Clustered Role ... Failed. 11

    Hi Team,

    Can somone help me with recommended Group policy applied to HyperV hosts.
    With above underlying issue I had to move HyperV computers to separate OU where no GP is applied. Now everything works fine but it is security concern.

  • RELEVANCY SCORE 3.28

    DB:3.28:Updating Esx4 Without Virtual Center Or Update Manager 39



    Hello,

    I am running a 1 host configuration where Virtual Center is installed as a VM. I understand that this is not "Best Practice". Our host is in a data center and rack space is limited for us. Anyway, how would we update ESX in this environment? Since Virtual Center is a VM, it would have to be shut down for the host to remediate the updates. We cannot provide a physical box at the current moment to run Virtual Center. So is there a non Virtual Center / Update Manager way of updating ESX?

    Thanks as always....

    DB:3.28:Updating Esx4 Without Virtual Center Or Update Manager 39


    Right on. Thanks for this!!

    You all have been very helpful with this issue and I greatly appreciate the assistance.

    I wanted to give helpfull or correct to each answer as each answer was helpful and educational. However i could not mark each answer correct, the forum only allowed me to mark 2 of the answers helpful and 1 correct. Thank again....

  • RELEVANCY SCORE 3.27

    DB:3.27:No Bridged Network On Debian Etch ck



    Hi,

    I'm using VMware Server 2 (2.0.1-156745) with Debian Etch as host (kernel 2.6.18-6-686). During the installation everything worked fine. All modules were compiled and loaded. The final output was:

    Starting VMware services:
    Virtual machine monitor done
    Virtual machine communication interface done
    VM communication interface socket family: done
    Virtual ethernet done
    Bridged networking on /dev/vmnet0 done
    Host-only networking on /dev/vmnet1 (background) done
    DHCP server on /dev/vmnet1 done
    Host-only networking on /dev/vmnet8 (background) done
    DHCP server on /dev/vmnet8 done
    NAT service on /dev/vmnet8 done
    VMware Server Authentication Daemon (background) done
    Shared Memory Available done
    Starting VMware management services:
    VMware Server Host Agent (background) done
    VMware Virtual Infrastructure Web Access
    Starting VMware autostart virtual machines:
    Virtual machines done

    The configuration of VMware Server 2.0.1 build-156745 for Linux for this
    running kernel completed successfully.

    DB:3.27:No Bridged Network On Debian Etch ck


    Hi,

    I'm using VMware Server 2 (2.0.1-156745) with Debian Etch as host (kernel 2.6.18-6-686). During the installation everything worked fine. All modules were compiled and loaded. The final output was:

    Starting VMware services:
    Virtual machine monitor done
    Virtual machine communication interface done
    VM communication interface socket family: done
    Virtual ethernet done
    Bridged networking on /dev/vmnet0 done
    Host-only networking on /dev/vmnet1 (background) done
    DHCP server on /dev/vmnet1 done
    Host-only networking on /dev/vmnet8 (background) done
    DHCP server on /dev/vmnet8 done
    NAT service on /dev/vmnet8 done
    VMware Server Authentication Daemon (background) done
    Shared Memory Available done
    Starting VMware management services:
    VMware Server Host Agent (background) done
    VMware Virtual Infrastructure Web Access
    Starting VMware autostart virtual machines:
    Virtual machines done

    The configuration of VMware Server 2.0.1 build-156745 for Linux for this
    running kernel completed successfully.

  • RELEVANCY SCORE 3.27

    DB:3.27:Virtual Host Issue sf



    on linux using Jboss 4.2.2GA, facing issue on virtual host configuration .. it shows blank page on opening in browserhttp://kn.example.com:8080below is server.xml conf for virtual host.
    Host name="kn"
    autoDeploy="false" deployOnStartup="false" deployXML="false"
    Aliaskn.example.com/Alias
    Valve className="org.apache.catalina.valves.AccessLogValve"
    prefix="kn" suffix=".log"
    pattern="common" directory="${jboss.server.home.dir}/log"/
    /Host

    DB:3.27:Virtual Host Issue sf


    below error in jboss startup logs22:34:21,196 WARN [TomcatDeployer] Failed to map vhost: kn.example.com22:34:21,196 INFO [TomcatDeployer] deploy, ctxPath=/Calendar, warUrl=.../tmp/deploy/tmp43393Calendar-exp.war/22:34:21,397 WARN [config] Unable to process deployment descriptor for context 'null'22:34:22,621 WARN [config] Unable to process deployment descriptor for context 'null'22:34:22,762 WARN [config] Unable to process deployment descriptor for context 'null'22:34:23,016 WARN [config] Unable to process deployment descriptor for context 'null'22:34:24,005 WARN [config] Unable to process deployment descriptor for context 'null'22:34:24,416 WARN [config] Unable to process deployment descriptor for context 'null'22:34:24,719 WARN [config] Unable to process deployment descriptor for context 'null'

  • RELEVANCY SCORE 3.27

    DB:3.27:Distrbuted Switch Configuration Restore fa



    please create a possibility if you have the must to create a virtual center from the scratch, that the distrbuted switch configuration are restored to the virtual center by adding the host like the classic switch configuration

    DB:3.27:Distrbuted Switch Configuration Restore fa


    please create a possibility if you have the must to create a virtual center from the scratch, that the distrbuted switch configuration are restored to the virtual center by adding the host like the classic switch configuration

  • RELEVANCY SCORE 3.27

    DB:3.27:Virtual Host Adapter And Virtual Switch? jf


    Hi

    I have 2 questions

    1-) VMware create virtual host adapters for host OS and Lan adapters for virtual OSes.

    What are those 2 virtual adapters stand for? I mean what are they for?

    2-) How can i learn/assign the virtual switch's ip adress? (Does virtual host adapter represent virtual switch?)

    Thanks

    DB:3.27:Virtual Host Adapter And Virtual Switch? jf

    Man, I don't know why it is so. But when i click Start-gt;Programs-gt;Vmware-gt;Virtual Network Editor, i can't see Intel Wireless pro in the list.

    But when i click in VMware's EDit-gt;Virtual NEtwork Editor, Intel is there. Now i am able to set it bridged network and Server 2008 can connect to internet.

    Very interesting. Thanks for help.

    But why is it so? I amreally curious about that.

    Why does Edit-gt;Virtual Netwok EDitor works but Start-gt;Programs-gt;Vmware-gt;Virtual Network EditorStart-gt;Programs-gt;Vmware-gt;Virtual Network Editor can't show my wireless card?

  • RELEVANCY SCORE 3.26

    DB:3.26:Clustering Virtual Machines Across Physical Host 3p



    I built two virtual machines on two separate ESX 4.0 hosts, I am using shared storage disks, separate SCISI controllers for each shared disk and SCSI Bus Sharing configuration to Physical. When I launch the Failover Cluster Validation Wizard to validate the configuration I get an error on the report "Failed at Validate SCSI-3 Persistent Reservation" and many storage configuration test get canceled on the wizard report.

    If I move both virtual machines to a single ESX 4.0 host and run the Failover Cluster Validation Wizard I don't get any error.

    Have anyone ran into this issue?

    Thanks

    Bandolero

    DB:3.26:Clustering Virtual Machines Across Physical Host 3p


    I got it back in November

    Thanks

    Carlos Martinez

    Message was edited by: a.p. - removed private data

  • RELEVANCY SCORE 3.26

    DB:3.26:Cannot Connect To Host When Add To Virtual Center k1



    I tried to connect the host to virtual center and all others seem to be fine. But one of them I got error "cannot connect to host" after about 10 minutes. I checked the DNS configuration and all seems to be fine.

    Any idea what else can go wrong??

    Thanks.

    DB:3.26:Cannot Connect To Host When Add To Virtual Center k1


    Do you have a firewall between your VirtualCenter server and the ESX Server? If so, do you have the relevant port open?

    I hope this helps.

  • RELEVANCY SCORE 3.26

    DB:3.26:Virtual Host-Only Doesnt Have A Valid Ip Configuration 1x


    hey my wifi was working perfectly ok .. but after i installed a virtual machine lunix i cant seem to connect to internet through my wifi.
    Though i am able to connect with internet with a cable please help.

    DB:3.26:Virtual Host-Only Doesnt Have A Valid Ip Configuration 1x

    Hi Sana,

    Thank you for posting in Microsoft community!

    From the issue description, I understand that your wifi is not working after installing virtual machine lunix. The issue you have posted is complicated to be answered in this forums. I would suggest you to contact IT pro forums.

    http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/threads

  • RELEVANCY SCORE 3.26

    DB:3.26:Virtual Memory 100% 7d


    Dear All,

    I am using Oracle RAC 11g under Windows 2008 Server 64-bit. I am having following errors/warninings in the DB Console of the Database:

    Finding Significant virtual memory paging was detected on the host operating system.
    Impact (Active Sessions) 1.15
    Impact (%) 100
    Period Start Time Apr 3, 2011 1:00:46 PM AST
    Period Duration (minutes) 59.3

    Host Configuration 100
    Action Host operating system was experiencing significant paging but no particular root cause could be detected. Investigate processes that do not belong to this instance running on the host that are consuming significant amount of virtual memory. Also consider adding more physical memory to the host.

    DB Configuration 100
    Action Consider enabling Automatic Shared Memory Management by setting the parameter "sga_target" to control the amount of SGA consumed by this instance.

    This is consuming 100% virtual memory and database has become extermely slow.

    Your help on this would highly be appreciated.

    Thanks
    GQ

    DB:3.26:Virtual Memory 100% 7d

    Handle: GQ
    Status Level: Newbie (20)
    Registered: Jan 20, 2001
    Total Posts: 344
    Total Questions: 92 (76 unresolved)
    so many questions so few answers.
    :-(

    Your help on this would highly be appreciated.increase size of virtual memory

  • RELEVANCY SCORE 3.26

    DB:3.26:Virtual Hosts Error 9x


    Whenever I try to make a virtual host using the Enterprise Manager I get an error:

    Configuration changes cannot be saved until the following validation errors are corrected:
    Base Exception: There are multiple instances in the input config file. Resolution: Please check the config file.

    I can't find any information on how I can fix this.

    DB:3.26:Virtual Hosts Error 9x

    Whenever I try to make a virtual host using the Enterprise Manager I get an error:

    Configuration changes cannot be saved until the following validation errors are corrected:
    Base Exception: There are multiple instances in the input config file. Resolution: Please check the config file.

    I can't find any information on how I can fix this.

  • RELEVANCY SCORE 3.26

    DB:3.26:Test Agent Configuration Error: No Such Host Is Known x7



    I had 4 Virtual Machines connected via internal virtual switch and configured to run CUITs. I had Test Controller running on host and Test Agents running on VMs. I used Visual Studio 2013 running on host to run tests: I used testsettings files to control
    on which VM the tests will be executed, which data will be collected etc.

    DB:3.26:Test Agent Configuration Error: No Such Host Is Known x7

    Hi,
    I guess this Mocrosoft Connect is submitted by you:
    http://connect.microsoft.com/VisualStudio/feedback/details/840538/test-agent-configuration-error-no-such-host-is-known
    Since we have reported this issue to Microsoft product team, then this issue is in their support scope, then I will close this thread, which also will be beneficial for other members who is looking at the same issue when they search on forums. I will help
    to follow up the Microsoft Connect, if there are some news/workarounds, I will post in this thread.
    Thank you for your understanding and support.Best regards,We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.

    Click
    HERE to participate the survey.

  • RELEVANCY SCORE 3.25

    DB:3.25:Lab Manager Connect Virtual Network To Physical Networks Confusing 9k


    Hi,I am testing on use lab manager3.0.I create a virtual network template (named virtual-network)with static ip addressing mode.I have only one vm in my configuration.And then connect my vm nic to the virtual network(virtual-network).Then I deploy my configuration ,in the deploy configuration page ,I check Connect Virtual Networks to Physical

    Networks.And chose my physical network (named lab manager default)Then deploy the configuration.In VC, I can see two vm are delpoyed.one is the vm,another is a virtual router.I am confusing about the virtual router.

    What does it do?

    1. In the user guide ,it says when you desploy a fenced configuration ,lab manager will configure the

    virtual router.However,i only check the Connect Virtual Networks to Physical

    Networks.The fenced network is not checked ,it still configures a new virtual router vm.Does this make sense?

    2.Does this VR route between vm in virtual network subnet (192.168.1.) to physical network(10.32.120.) subnet?

    3.As fenced network vm should keep on one ESX host,so the fenced network can not be Vmotion or using DRS.As Connect Virtual Networks to Physical

    Networks will creates a new virtual router vm,when the vm does vmotion,the virtual router vm has to move too.This is not supported in VI3 .So does this mean configuration with Virtual Networks to Physical

    Networks can not do Vmotion or DRS?

    Thanks a lot! And I am looking forward your explain.

    DB:3.25:Lab Manager Connect Virtual Network To Physical Networks Confusing 9k


    I've seen this and assumed that it was what LM used to route NAT traffic out of the LM environment. As you say it does exist even if you have never used fencing.

  • RELEVANCY SCORE 3.25

    DB:3.25:6509 Configuration mk



    Hi,

    I think I'm missing something very simple here. I have added a host to port gi1/1 on the 6509. I can ping the HSRP virtual address from the host and I can ping other gateway's elsewhere in the network. However I can't ping the host on the vlan 100. There is a route to the VLAN everything looks good. The host is on the same subnet, just can't figure this out. I have attached the configuration file.

    Any help well rated...

    Gavin

    DB:3.25:6509 Configuration mk


    Hi

    Sometimes, I do have same type of problem. But they are generally solved by disabling/enabling the NIC.

    Do you find errors on the switch interface when you connect your problematic host?

    Regards

    JD

  • RELEVANCY SCORE 3.25

    DB:3.25:Configuration Issues Related To The Virtual Hard Drive Configuration With Id xd


    hi,
    i am trying to create a new vm using svcmm 2012. i have marked the server to be highly available... when i try to add the server to a host i get the follwoing error
    configuration issues related to the virtual hard drive configuration with id (long id number)
    Update placement or determine an appropriate host for this virtual machine and try the operation again.
    any help appreciated

    phill

    DB:3.25:Configuration Issues Related To The Virtual Hard Drive Configuration With Id xd

    Nitram88 -
    Are you getting errors about your cluster being over-committed?

    Nick

  • RELEVANCY SCORE 3.25

    DB:3.25:Virtual Memory Paging p1


    Hey everyone,
    Here's the issue. I have an 11g database and pretty much I get a consistent "Virtual Memory Paging" in the ADDM Performance Analysis section. This has 100% impact on the system. I run a ADDM Report and i get this:

    Finding 1: Virtual Memory Paging
    Impact is .9 active sessions, 100% of total activity.
    -----------------------------------------------------
    Significant virtual memory paging was detected on the host operating system.

    Recommendation 1: Host Configuration
    Estimated benefit is .9 active sessions, 100% of total activity.
    ----------------------------------------------------------------
    Action
    Host operating system was experiencing significant paging but no
    particular root cause could be detected. Investigate processes that do
    not belong to this instance running on the host that are consuming
    significant amount of virtual memory. Also consider adding more physical
    memory to the host.

    Can anyone point me in the right direction to solving this issue??

    DB:3.25:Virtual Memory Paging p1

    Charles, Thanks for the reply. I was not sure where to go with this, but you helped answer some of my questions.

  • RELEVANCY SCORE 3.24

    DB:3.24:Virtual Xxxx Groups 3j


    Hello,
    I saw two groups under Authoring Groups: (they are Enabled)
    - Virtual Machine Group
    - Virtual Server Group
    They are empty even I have ESX servers and Virtual machines (nworks is reporting them - VMware - Veeam) what is the exact criteria beside

    ( Object is Virtual Machine Host AND True ) or

    ( Object is Virtual Machine AND True )
    used for these groups?
    Thanks,
    Dom
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    DB:3.24:Virtual Xxxx Groups 3j

    Hello Walter,
    Thanks a lot I saw that the Virtual Machine Virtual Server is listed

    under Attributes from the Windows Core Library Management Pack
    and/or Microsoft Windows Hyper-V Library.
    Overrides:
    System Center Virtual Machine Manager 2008 PRO Host Performance
    Brocade FCHBA Monitoring
    Dell PRO-enabled Management Pack
    System Center Virtual Machine Manager 2008 PRO Host Performance
    System Center Virtual Machine Manager 2008 PRO Virtual Machine Right-Sizing
    XXXX - VMware ESX
    nWorks VMware VEM MP
    Microsoft Windows Hyper-V 2008 Discovery
    Target:
    System Center Virtual Machine Manager 2008 PRO Library

    Thanks,
    DOm

    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

  • RELEVANCY SCORE 3.23

    DB:3.23:Whats A Virtual Host zk


    Could anyone tell me what is a Virtual Host.

  • RELEVANCY SCORE 3.23

    DB:3.23:Vmotion Error - "Unable To Access The Virtual Machine Configuration: Unable To Access File" 7a



    During the migration validation I am receiving the following error:

    Unable to Migrate from Hostx to Hostz: Unable to access the virtual machine configuration: Unable to access file.

    Each host is set up exactly the same

    Please Advise

    Aaron

    DB:3.23:Vmotion Error - "Unable To Access The Virtual Machine Configuration: Unable To Access File" 7a


    All my VMs are on shared SAN storage. I did find out with the issue was though when I attempted to do a storage motion with the VM. It had a Snapshot attached to it still. I do not recall when I created it but once I deleted the Snapshot it migrated without a problem.

  • RELEVANCY SCORE 3.23

    DB:3.23:What Is The Best Practice For Hyper-V Host Virtual Memory Configuration?---Should This Be Manually Set Or Automatically Set? pz


    what is the best practice fora hyper-v host's virtual memory configuration?---should this be manually set or automatically set?
    windows 2008 R2.dsk

    DB:3.23:What Is The Best Practice For Hyper-V Host Virtual Memory Configuration?---Should This Be Manually Set Or Automatically Set? pz

    Hi,
    Please check the following blogs.
    Hyper-V Server Sizing: How Much Memory for the Host?
    http://blogs.technet.com/b/tonyso/archive/2008/08/12/hyper-v-server-sizing-how-much-memory-for-the-host.aspx
    Parent memory reserve with dynamic memory
    http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/09/03/parent-memory-reserve-with-dynamic-memory.aspx

  • RELEVANCY SCORE 3.22

    DB:3.22:What Virtual Router Goes With What Configuration fz


    When you fence a configuration it creates a virtual router on the host, in some cases they are next to each other in the list. However sometimes the virtual router is created far down the list from the configuration. My question is how do you know which virtual router goes with which configuration? I end up having to look at which datastore its on and cross referencing it with that organization. Then i have to look at everyone in the configuration to find the combination. Does anyone have a better way of finding this out?

    Alan

    DB:3.22:What Virtual Router Goes With What Configuration fz


    Go into the vCenter and change to "virtual machine and templates" view.

    You should be able to expand the folders to see exactly where each configuration is laid out, and the routers should be stored with them.

    Remember, don't fiddle with stuff from here ... it's just suppose to look pretty __

    Regards,EvilOne

    VMware vExpert 2009

    NOTE: If your problem or questions has been resolved, please mark this thread as answered and award points accordingly.

  • RELEVANCY SCORE 3.22

    DB:3.22:Error Adding Host To Cisco N1000v 7c


    Cannot complete a Distributed Virtual Switch operation for one or more host members.

    DVS operations failed on host x, error during the configuration of the host: create dvswitch failed with the following error message: sysinfoexception:node (vsi_node_net_create); status(bad0003)=not found; message = instance(0); Input(3)DvsPortset-0 256 cisco_nexus_1000v got (vim.fault.PlatformConfigFault) exception

    DB:3.22:Error Adding Host To Cisco N1000v 7c


    "Those builds are patched and there is an issue where VUM does not recognize that the VEM module is compatibile with those builds. If you use the FCS build of 164009 it works no problem. There is a lot of confusion around what is the right procedure to get VUM working again. I don't have a good answer right now other than install manually.

    I'm going to work on it today and hopefully have a procedure for fixing VUM to work with the patched ESX and ESXi images."

    ****************

    Hello,

    I have exactly the same problem than Ed. I tried all your tests (install via vCLI, vMA, VUM) but the VEM doesn't want to be install. The esx build that i use now is 186700. So the two VEM patch doesn't to run unless the core VEM is not installed. If you have some news concerning a new release of the Nexus 1000v, inform me. Thanks.

    jp

  • RELEVANCY SCORE 3.22

    DB:3.22:Importing A Datastore With Virtual Machines Residing On A San Disk Into Esx Host 3.5 9c



    Hi guys,

    Just a quick question. I have built a ESX 3.5 U2 host and I want to import a SAN disk containing a datastore with several virtual machines which was originally running under a ESX 3.0.1 host. SAN configuration is completed. Is it a matter of scanning the HBA's and importing the SAN disk with the virtual machines?

    Thanks,

    Paul.

    DB:3.22:Importing A Datastore With Virtual Machines Residing On A San Disk Into Esx Host 3.5 9c

    Hi Paul,

    I picked the following up after a bit of Googling - might be worth a go:

    On the VC server, locate the upgrade folder under your VC server program directory. Open the bundleversion.xml file and look for the bundle ID that corresponds to your ESX version (ie. ESX 3.0.x = 6, ESX 3.5.x = 7)
    Copy the appropriate vpx-upgrade file for your bundle ID to a temp directory on your ESX server (ie. vpx-upgrade-esx-6-linux-)Install the file by typing the following from the Service Console in the directory that you copied the file to: sh ./
    Once it completes restart the hostd and vpx services on the ESX host by typing "service vmware-vpxa restart" and "service mgmt-vmware restart"
    If your server still shows disconnected, then a reboot of the ESX server is usually needed to recover from this.span class="a3"
    If the server still displays as disconnected, you
    can try manually installing the VC agent on the ESX server by following
    these steps:

    I've never tried this myself, but it sounds like it could do the trick.

    Doug.

  • RELEVANCY SCORE 3.22

    DB:3.22:Windows Server 2012 Failover Cluster Error: Cluster Resource Virtual Machine Configuration ... Of Type Virtual Machine Configuration In Clustered Role ... Failed. xm


    I have two windows 2012 host server that are clustered using windows failover cluster feature. Each server is hosting four VMs. When migrating from Host2 to Host1, the migration failed with the following error:

    Cluster resource 'Virtual Machine Configuration SCPCSQLSRV01' of type 'Virtual Machine Configuration' in clustered role 'SCPCSQLSRV01' failed. The error code was '0x569' ('Logon failure: the user has not been granted the requested logon type at this computer.').
    When this happens, the VM that I was migrating can no longer be started even on the original host. The only remedy is to restart the host server.
    Any suggestion on resolving this problem?

    Thanks
    Ikad

    DB:3.22:Windows Server 2012 Failover Cluster Error: Cluster Resource Virtual Machine Configuration ... Of Type Virtual Machine Configuration In Clustered Role ... Failed. xm

    Post Hyper-V questions here:
    http://social.technet.microsoft.com/forums/en-US/winserverhyperv/threads/
    This forum is for Virtual Server 2005, a discontinued product.

  • RELEVANCY SCORE 3.22

    DB:3.22:Host Memory And Ram a9


    we are using Oracle 10gr2 database on windows server 2003. At server 12 GB ram is insatalled but when in the Enterprise Manager, host configuration page it shows "Memory Size (MB) 2048 "

    there is also messages "Significant virtual memory paging was detected on the host operating system"

    how i can increase memory size of host?

    OS windows server 2003
    DB 10gr2

    DB:3.22:Host Memory And Ram a9

    Konsultant wrote:
    we are using Oracle 10gr2 database on windows server 2003. At server 12 GB ram is insatalled but when in the Enterprise Manager, host configuration page it shows "Memory Size (MB) 2048 "

    there is also messages "Significant virtual memory paging was detected on the host operating system"

    how i can increase memory size of host?

    OS windows server 2003
    DB 10gr2I'm amazed.... that what constitutes hacks are used to supply crutches for a commercial (expensive) 32bit operating system.. when there is an Open Source operating system available that provides full and proper 64bit support. When this same Open Source o/s is used by over 80% of this planets largest and baddest computer clusters.. (of which a mere 1% use Windows).

    Think about it.. Oracle uses Linux. 80% of the largest and fastest computer clusters use Linux. Linux dominate as the preferred operating system for devices (from web server to app servers to cloud infrastructure) on the Internet.

    And you want to use PAE "hacks" to enable a 32bit commercial o/s to use more memory than what is was designed to properly handle? Why?

  • RELEVANCY SCORE 3.22

    DB:3.22:What Is A Difference Between "Logical Cpus" And "Logical Cpus Per Host"? 3z



    Hello everyone!

    In VMware official document "vsphere-51-configuration-maximums" or "vsphere-55-configuration-maximums.pdf" in section "ESXi host maximums \ Compute Maximums" exists to items:

    "Host CPU maximums \ Logical CPU per host" ( vSphere 5.1: 160; vSphere 5.5: 320 )

    and

    "Virtual machine maximums \ Virtual CPUs per host" (vSphere 5.1: 2048; vSphere 5.5: 4096)

    Question: what is the difference between these two items?

    And one more complex thing from maximums:

    Virtual machines per host: 512

    Hosts per cluster: 32

    Therefore, in the cluster can exist Virtual Machines (in maximum): 521 * 32 = 16384

    But in document we have only 4000 VMs in maximum.

    Why?

    Thank you

    DB:3.22:What Is A Difference Between "Logical Cpus" And "Logical Cpus Per Host"? 3z


    You are seeing double the number of logical processors because your CPUs probably support hyperthreading, and that is also enabled, which doubles the number of visible Logical Cores.

    However this doesn't mean that you actually have 64 processors. More information about this, like others have said is available in the vsphere performance guide, on page 21.

    http://www.vmware.com/pdf/Perf_Best_Practices_vSphere5.5.pdf

  • RELEVANCY SCORE 3.21

    DB:3.21:Errors When Trying To Vmotion ac



    unable to migrate from host a to host b: unable to access the virtual machine configuration: unable to access file.

    \[storage1(1)]/VMW-HostA/VMW-HostA-dc548a14.vswp

    unable to migrate from host a to host b: virtual disk 'Hard Disk 1' is not accessible on the host: unable to access file.

    \[storage1(1))]VMW-HostA/VMW-HostA.vmdk

    any ideas?

    DB:3.21:Errors When Trying To Vmotion ac


    One thing that we have seen with deleting/merging snapshots is that the task hangs in the VI client but actually completes ok.

    try (at the service console) restarting the management agent

    service mgmt-vmware restart

  • RELEVANCY SCORE 3.21

    DB:3.21:Host-Only Guest Adapter Reach Internet Through Host Adapter Adding A Route In The Host Os d9



    Manual Using VMware workstation 10, in page 163, says:

    "In the default configuration, a virtual machine in a host-only network cannot connect to the Internet. If you install the proper routing or proxy software on the host system, you can establish a connection between the host virtual network adapter and the physical network adapter in the host system..."

    But it does not give any sample or advice about how to achieve this goal.

    Can anybody give a step by step procedure to config this?

    Regards,

    DB:3.21:Host-Only Guest Adapter Reach Internet Through Host Adapter Adding A Route In The Host Os d9


    My Host is Win7 x64 with VMware Workstation 10. My Guests are Red Hat Linux 5 and 6, Oracle Linux 5 and 6, and Oracle Solaris 11. My host has 2 physical network adapters.

    Are you now able to recommend me the next steps? Is it needed a proxy software (which ones can I use)? Is it possible to achieve this task using only ip forwarding and route add command on the host or guest?

    In other goals, can I use same technic to get communicated the VMware Workstation 10 virtual adapters (in the Host) with Oracle VirtualBox 4 virtual adapters (also in the host) and viceversa. I am currently using the Bridged Network of my VMware to communicate to VBox machines, but it provides mostly only one network. I want to be able to communicate more networks between them.

    Regards,

  • RELEVANCY SCORE 3.21

    DB:3.21:Cannot Deploy Any Configuration ds


    I receiving this error message and cannot deploy any configuration,could someone guide me how to fix this please.

    Add virtual switch "myserver.com" Error during the configuration of the host: SysinfoException: Node (VSI_NODE_net_create) ; Status(bad0006)= Limit exceeded; Message= Instance(0): Input(3) pgInternal01-159LM20 64 etherswitch

    DB:3.21:Cannot Deploy Any Configuration ds

    i resolved this issue!,

    i have check the pg on the first vSwitch and found out that it configured as 4096, so i reduce number to 256, restart the esx and this all old vswitch were restored and able to create the pg in LM4 as usual.

  • RELEVANCY SCORE 3.21

    DB:3.21:Configure Virtual Hostnames In Aix 7a



    Hi All,

    We would like to configure virtual hostnames for our sap servers. We are running on AIX 5.3

    Please let us know what exactly needs to be done at unix level to do the configuration.

    We are referring to the below sap notes.

    Note 962955 - Use of virtual TCP/IP host names

    Thanks,

    Tanuj

    DB:3.21:Configure Virtual Hostnames In Aix 7a


    HI,

    Ask your OS vendor or who has implemented cluster about IP address of cluster package,

    then, add those IP addresses in you "/etc/hosts" file as below:

    IP add clusterPackage ClusterPakage-1
    IP add clusterPackage ClusterPakage-2

  • RELEVANCY SCORE 3.21

    DB:3.21:Virtual Cpus In Vsphere 5 31



    Hi Techies,

    Kindly assist for the below queries?

    as per vmware's Configuration Maximums for vSphere 5.0

    Number of Virtual CPUs per host = 2048

    Number of Virtual CPUs per Core = 25

    As for as i understood, One Virtual CPU = 1 CPU core, a bit confusion here, How 25 Virtual CPUs will be created per Core.

    DB:3.21:Virtual Cpus In Vsphere 5 31


    Thanks Dave, Now its clear to me...:)

  • RELEVANCY SCORE 3.20

    DB:3.20:Can't Migrate Virtual Machine fa



    Can`t migrate Virtual Machine with snapshots from ESX 3.0.1 to Cluster (4 ESX Servers 3.0.1) with DRS and HA Enabled. In "Compatibility" window i've seen error " Unable to access virtual machine configuration. Unable to to access file "snapshot file name" ". Virtual machine with out snapshot migrated succesfully. All permissions on snapshot file exist. Is it possible migrate virtual machine with snapshot from host to cluster?

    DB:3.20:Can't Migrate Virtual Machine fa


    Did you take the snapshot when the VM is powered on? I couldn't migrate VMs from one host to another if it had a snapshot, taken when the VM is powered on.

    Having said that, I couldn't migrate the VM even after deleting the snapshot and re-creating it in power off state.

  • RELEVANCY SCORE 3.20

    DB:3.20:How Delete Virtual Infrastructure 2.5 Configuration Issue xa


    ...has no management network redundancy

    I have reconfigured my virtual switches with two network adapters, but I still receive the same message "Host has currently no management network redundancy".

    DB:3.20:How Delete Virtual Infrastructure 2.5 Configuration Issue xa

    You have found the solution. In the 2 servers where I have the problem I have reconfigured for HA and, despite that have remained hanging and I have had to reboot them, no longer the message "Host xxx currently has no management network redundancy" appears.

    Thanks by your contribution

  • RELEVANCY SCORE 3.20

    DB:3.20:Distributed Switches d9


    Dear All,

    I would like to setup two hosts using Distributed Switches. Now I need to find out if the following configuration will be supporte.

    Host 1

    6 Nics

    Host 2

    6 Nics

    vCenter Server

    The way I want to configure the distributed switches is as follows

    Host 1

    I will use two Nics for service console same thing with Host 2

    Then I will take 1 Nic Host 1 and 1 Nic Host 2 for vMotion

    Take 1 Nic Host 1 and 1 Nic Host 2 for iSCSI

    Take 1 Nic Host 1 and 1 Nic Host 2 for Virtual Machine 0

    Take 1 Nic Host 1 and 1 Nic Host 2 for Virtual Machine 1

    So my question is this configuration supported?

    Regards,

    T

    DB:3.20:Distributed Switches d9

    Yes, its supported. This link will give you a better idea http://www.networkworld.com/community/node/36359. it discuss about the scenario in virtual switch, you can follow the same on DVS as well.

    :+: VCP,RHCE,EMCPA.