• RELEVANCY SCORE 4.75

    DB:4.75:Re: Vehicle Tracking ap





    I have the vehicle tracking add in ribbon installed on AutoCAD 2015. When I try selecting any of the features on the ribbon, the message box comes up with Unknown Command. Is there anything I need to do, to get these to work?







    Solved!
    Go to Solution.

    DB:4.75:Re: Vehicle Tracking ap

    Hello

    I am a stupid boy, I don't look at the Vehicle Tracking Page ZERO !!

    OK THKS, I have learned something today !

    Regards, Patrice




    Bye, Pat ( Supporting Troops )If you are happy with my answer please mark "Accept as Solution" and if very happy please give me a Kudos (Compliment) - Thanks

  • RELEVANCY SCORE 4.53

    DB:4.53:Re: Vehicle Tracking - Create Custom Vehicle 1f





    I'm evaluating / testing Vehicle Tracking swept path design software. I have a Heavy Load Haul trailer I would like to create in the program but I just can't seem to figure out what to use where. I saw a video when the program was AutoTrack that had a similar vehicle but I can't find it in this program. Any advice or help would be greatly appreciated. I'm going to try to attach a side profile view of the vehicle.

    DB:4.53:Re: Vehicle Tracking - Create Custom Vehicle 1f


    The detailed information required to model most vehicles can be seen from the help pages provided with AVT (search for "Vehicle Wizard") e.g. the number of axles, the axle widths, the spacing between axles, the number of wheels on each axle, wheelbases, turning circle, coupling points and the dimensions of the different units.

    However, as this particular vehicle has an unorthodox configuration, additional parameters probably apply. The advanced editor in the Vehicle Wizard may be necessary to create this vehicle. For example, the 5th and 6th axles are on a separate drawbar bogey and seem to be spanned by a rigid beam with a pivot on the truck and the 2nd bogey. The dimensions of each separate unit will be required including overhangs and wheelbases. This is to ensure that all coupling points and linkages are correctly specified.

    Any steering linkages between the rear and front axles of any of the units will therefore alsobe required. Please provide details if the option exists to override the rear steering of any unit. This can be also modelled.

    Please let me know if you wishto clarify any of the above.




    Viji.Kumar

  • RELEVANCY SCORE 4.09

    DB:4.09:Vehicle Tracking System fa




    How can I read the mobile internal information like System ID through my MIDlet. I'm working on a project of vehicle tracking system. Every tower (GSM) has a unique System ID which the mobile update as soon as it enters a new cell. Now the problem is how can I read the System ID. Thanks in advance.

    DB:4.09:Vehicle Tracking System fa

    Hi vyasanirudh,
    I'm going to work in a project called Vehicle Tracking system. Our company have no idea of how to implement this in Java platform. Pls give me the details for it and the technologies that should be used for the application in java and more information if u feel that will help me

    Thanks Regards

    Mani

  • RELEVANCY SCORE 3.98

    DB:3.98:Vehicle Tracking System cd


    I want to develop the vehicle tracking system using bing maps i got the multi point dicections program on Bing Maps Interactive SDK here we can track the road but i want to show the online tracking means i want to show the tracking using coordinates(latitude and longitude). i want to track vehicle on online data.Is it possible using bing maps interactive SDK or i have to use other bing web sevices or any other option?Thanks in advance.

    DB:3.98:Vehicle Tracking System cd

    All you need to do to show a vehicle on map is either use the latlong to put a pushpin on the map and then update it as it moves, or create a polyline and add the new coordinates to an array of coordinates. Nothing special here. I have a blog post on how to integrate a gps with bing maps which may help: http://rbrundritt.spaces.live.com/blog/cns!E7DBA9A4BFD458C5!824.entry Windows Live Developer MVP - http://rbrundritt.spaces.live.com

  • RELEVANCY SCORE 3.88

    DB:3.88:Problem With Vehicle Package System 91



    Regarding the Premier Pack, since I was never able to find the vinyls or artwork of the Premier Vehicles, I had to save their default schemes as a vehicle package and then apply it to other vehicles.

    BUT NOW whenever I try to do so, i get a prompt saying "this package contains content that must be purchased or downloaded. please visit motorstorm.com for details.."

    I re-downloaded everything (twice) and reset my Kimachi to default and save a new package, but got the same pop upwhen trying to apply it to another vehicle.

    I downloaded the premier pack months ago when I got it with my US copy of the game.

    I think it has something to do with the premier pack being released just now in Europe.




    DB:3.88:Problem With Vehicle Package System 91

    I've noticed too. It baffles me why they would release content that doesn't include the stickers/artwork/or liveries. Also that the superbikes have no parts...

  • RELEVANCY SCORE 3.77

    DB:3.77:How Do I Display Two Open Programs On A Large Screen For One Minute Alternatively? 3a


    I wish to display a vehicle tracking program, and an Excel spreadsheet on a large 46 screen for a one minute each rotation. they are installed on a Windows 2003 server and will be running under Remote Desktop\Terminal Server

    DB:3.77:How Do I Display Two Open Programs On A Large Screen For One Minute Alternatively? 3a

    Hi,
    if you want to send key-strokes using Powershell this article may help
    http://technet.microsoft.com/en-us/library/ff731008
    Until now there is no nativ implementation of sending keystrokes using native Powershell.
    regards Thomas Paetzold visit my blog on: http://sus42.wordpress.com

  • RELEVANCY SCORE 3.73

    DB:3.73:Re: Objects Communicating With Each Other k9


    example of Vistor parttern from Wikipedia
    interface Visitor {
    void visit(Wheel wheel);
    void visit(Engine engine);
    void visit(Body body);
    void visitCar(Car car);
    void visitVehicle(Vehicle vehicle);
    }

    class Wheel {
    private String name;
    Wheel(String name) {
    this.name = name;
    }
    String getName() {
    return this.name;
    }
    public void accept(Visitor visitor) {
    visitor.visit(this);
    }
    }

    class Engine {
    public void accept(Visitor visitor) {
    visitor.visit(this);
    }
    }

    class Body {
    public void accept(Visitor visitor) {
    visitor.visit(this);
    }
    }


    abstract class Vehicle {
    protected Engine engine = new Engine();
    protected Body body = new Body();
    protected Wheel[] wheels;

    public Engine getEngine() {
    return this.engine;
    }
    public Body getBody() {
    return this.body;
    }
    public Wheel[] getWheels() {
    return this.wheels;
    }
    public void accept(Visitor visitor) {
    visitor.visitVehicle(this);
    }
    }

    class Car extends Vehicle {
    public Car() {
    super();
    this.wheels = new Wheel[]
    { new Wheel("front left"), new Wheel("front right"),
    new Wheel("back left") , new Wheel("back right") };
    }

    public void accept(Visitor visitor) {
    visitor.visitCar(this);
    }
    }

    class PrintVisitor implements Visitor {

    public void visit(Wheel wheel) {
    System.out.println("Visiting "+ wheel.getName()
    + " wheel");
    }
    public void visit(Engine engine) {
    System.out.println("Visiting engine");
    }
    public void visit(Body body) {
    System.out.println("Visiting body");
    }

    public void visitVehicle(Vehicle vehicle) {
    System.out.println("Visiting vehicle");
    }
    public void visitCar(Car car) {
    System.out.println("Visiting car");
    car.getEngine().accept(this);
    car.getBody().accept(this);
    for(Wheel wheel : car.getWheels()) {
    wheel.accept(this);
    }
    }

    }

    class DoVisitor implements Visitor {
    public void visit(Wheel wheel) {
    System.out.println("Steering my wheel");
    }
    public void visit(Engine engine) {
    System.out.println("Starting my engine");
    }
    public void visit(Body body) {
    System.out.println("Moving my body");
    }
    public void visitCar(Car car) {
    System.out.println("Starting my car");
    car.getEngine().accept(this);
    car.getBody().accept(this);
    for(Wheel wheel : car.getWheels()) {
    wheel.accept(this);
    }
    }
    public void visitVehicle(Vehicle vehicle) {
    System.out.println("Starting my vehicle");
    }
    }

    public class VisitorDemo {
    static public void main(String[] args){
    Car car = new Car();
    Visitor printVisitor = new PrintVisitor();
    Visitor doVisitor = new DoVisitor();
    car.accept(printVisitor);
    car.accept(doVisitor);
    }
    }

    DB:3.73:Re: Objects Communicating With Each Other k9

    The run() method of a Thread returns nullyou mean 'is void'

  • RELEVANCY SCORE 3.47

    DB:3.47:Re: Vehicle Trackig. Wheres The Buzz? pa



    http://knowledge.autodesk.com/support/vehicle-trac​king/learn-explore/caas/video/youtube/watch-v-JrML​...

    Don't know how this got past me? Ayone care to share there experience?




    Thank youJoseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 2013HP Z210 WorkstationIntel Xeon CPU E31240 @ 3.30 Hz12 GB RamNote: Its all Resistentialism, so keep calm and carry on64 Bit Win7 OS

    DB:3.47:Re: Vehicle Trackig. Wheres The Buzz? pa


    When you install you should be prompted for a 30 day trial or to enter a serial number and keycode. You need to select the trial. If you installed more than 30 days ago as a trial the trial is over and you may be prompted as you stated.




    John Mayo, PEIDSP 2014Win 7 64, Xeon ES165@3.2Ghz,64 GB RAM, Quadro K4000 (x2)

  • RELEVANCY SCORE 3.47

    DB:3.47:Re: Infraworks Intersection 97



    Hello!

    Tell me, please, how can I create my own vehicle to the intersection?







    Solved!
    Go to Solution.

    DB:3.47:Re: Infraworks Intersection 97


    To RavchukNA's comment I would add that the design vehiclerating selectionsforintersectionsare now available to InfraWorks 360 Pro subscribers withRoadway Design for InfraWorks 360 Proas well. (By the way, this functionalityworks with intersections of design roads, not with the basic ("spline") roads that come standard with InfraWorks.) For more about the rule-based intersections, see our blog post at http://autode.sk/152AttS.

  • RELEVANCY SCORE 3.46

    DB:3.46:Sharepoint Group Calendars Dont Remeber Resorces f3


    Hi
    This may be in the wrong forum but it was the closest i could find.
    i have a proble with sharepoint Foundation 2010 that i belive many people have.
    I have created a group calendar for tracking Vehicle use.
    Ihave 5 vehicles in the related resources list and i can book them for specific times. which is excellent, exactly what i want to do.
    Ican add resources to the view of the calendar showing all the events for each resource which is also good because this is what i want to see, every vehicle and what it is doing today/this week.

    the problem is that when i navigate away from the page with the calendar view on it then return the resources are no longer shown in the view.
    I can re-add the resources to the view but every time i navigate away the view reverts to being empty.
    how can i default to showing specific resources.
    Thanks

    DB:3.46:Sharepoint Group Calendars Dont Remeber Resorces f3

    Hi
    This may be in the wrong forum but it was the closest i could find.
    i have a proble with sharepoint Foundation 2010 that i belive many people have.
    I have created a group calendar for tracking Vehicle use.
    Ihave 5 vehicles in the related resources list and i can book them for specific times. which is excellent, exactly what i want to do.
    Ican add resources to the view of the calendar showing all the events for each resource which is also good because this is what i want to see, every vehicle and what it is doing today/this week.

    the problem is that when i navigate away from the page with the calendar view on it then return the resources are no longer shown in the view.
    I can re-add the resources to the view but every time i navigate away the view reverts to being empty.
    how can i default to showing specific resources.
    Thanks

  • RELEVANCY SCORE 3.25

    DB:3.25:Which Microsoft Product Is Best For Vehicle Tracking pp


    Hi,I would like to know which Microsoft Product will be suitable for developing vehicle tracking solution, am getting confuse about various product of Virtual Earth like,Virual Earth - Bing Maps API,Bing Maps Map Services,MapPoint,MapPoint webservice API,SliverLight MapControl ctp.Initially, we are planning to develop vehicle tracking solutions in pilot phase using GPS device on 400 vehicles. In this case, I have found a lots of help forums, blogs of virtual earth, still I am getting confuse to choose the product.Kindly help me out of this, and guide me the right direction to achieve my task as earily as possible.Regards,prats

    DB:3.25:Which Microsoft Product Is Best For Vehicle Tracking pp

    I've been prototyping vehicle tracking in the UK with the Silverlight control and it's perfect for us; we have live tracking for a relatively small number of vehicles, plus mapping of a large number of fixed assets and the silverlight control gives us by far the best performance and features. It's very easy to work with and given that everying is XAML, really easy to code against. We're using SQL Server 2008 although we aren't using the spatial types due to the existing code base; we would like to start using the new geo-features, but we have very large databases and some rough calculations show that spatial indexes are very large, so we're holding off on that for another phase. With regard to licensing, you need to contact your local Microsoft representative; they'll be in the best position to advise you on the exact license you require and the costs. [edit] Mail maplic@microsoft.com to ask about licencing.

  • RELEVANCY SCORE 3.22

    DB:3.22:Re: Cannot Resolve Symbol dx


    super-precise description. "My vehicle doesn't run. Why?"

    Can you give us the code that you're trying to run?
    Then we might have a chance to tell you what's wrong.

    DB:3.22:Re: Cannot Resolve Symbol dx

    i added the classpath already..im using win2k and it goes like this:
    Variable Name: CLASSPATH
    Variable Value: D:\jdk1.3\lib;D:\Java

    D:\Java = where my .java files reside.

    but still i got the same errors. hoping for some response. thanks

  • RELEVANCY SCORE 3.21

    DB:3.21:Crowdsupport a9


    Do Telstra have or can they recommend a vehicle tracking system? My business runs a boat and several cars and I'd like to be able to, for example, log in to a website or open an app and see where all my vehicles are.

    DB:3.21:Crowdsupport a9


    Hey Whosonsecond,We have this:http://www.telstra.com.au/business-enterprise/down​load/document/business-navman-teg-brochure.pdfI can't personally give you any more info about the product, however our business team should be able to, on 13 22 00




    StephSenior Moderator24x7 Digital Customer Care Team____________________PM Steph - I’m a member of the Overnight Team, so I’ll reply to messages between 10:30pm – 7:00am on the days I’m working.Live Chat with TelstraNeed help? Check out our KnowledgeBase here || Find what you were looking for? Tag answers as Accepted Solution All moderation actions are supported by the CrowdSupport Community Guidelines

  • RELEVANCY SCORE 3.19

    DB:3.19:No Text Or Email, Just Called Cs And Got My Tracking Number :)) 9a



    Your parcel is on the vehicle for delivery, due between 14:49 - 15:49woooop!!!

    DB:3.19:No Text Or Email, Just Called Cs And Got My Tracking Number :)) 9a


    @ lara7677

    Me too, just done exactly the same thing 10 mins ago

    IPhone 5, 16gb black, ordered sunday 11:00

  • RELEVANCY SCORE 3.15

    DB:3.15:I Downloaded Ios7 Now I Do Not Have Voice Commands On My Gm Connect Bluetooth Via Onstar! My Calls Are Routed They Siri Not My Vehicle. I Contacted Apple I Contacted Gm, Went To The Dealer And Everyone Seems To Pass The Buck. Ios6 Worked, 8z


    Since downloading ios7 i do not have GM connect bluetooth capability! Due to this I contacted apple! GM connect, and took my vehicle to the dealer.. To no avail. Each are passing to buck as to who's fault it is. I was told to delete my phone from vehicle and re install.. Did not work.. My calls go thru Siri not the vehicle. Apple stated that GM needs to update to be compatible to them.. But I am in awe.. I purchased bluetooth with and worked fine with ios6.. This is a real problem due to driving safety....

    DB:3.15:I Downloaded Ios7 Now I Do Not Have Voice Commands On My Gm Connect Bluetooth Via Onstar! My Calls Are Routed They Siri Not My Vehicle. I Contacted Apple I Contacted Gm, Went To The Dealer And Everyone Seems To Pass The Buck. Ios6 Worked, 8z

    Since downloading ios7 i do not have GM connect bluetooth capability! Due to this I contacted apple! GM connect, and took my vehicle to the dealer.. To no avail. Each are passing to buck as to who's fault it is. I was told to delete my phone from vehicle and re install.. Did not work.. My calls go thru Siri not the vehicle. Apple stated that GM needs to update to be compatible to them.. But I am in awe.. I purchased bluetooth with and worked fine with ios6.. This is a real problem due to driving safety....

  • RELEVANCY SCORE 3.15

    DB:3.15:Re: Navigation m9


    Hi,

    I have created a base and target dummy report using the column I wish to link. The values in the base report appear as:

    base

    DIVISION
    Business Finance
    Commercial Vehicle Solutions
    Consumer Finance
    Driving Instructor Centre
    Head Office
    Insurance Services
    Invoice Finance
    Vehicle Solutions

    When I click on Business Finance this leads to:

    target

    DIVISION
    Business Finance
    Commercial Vehicle Solutions
    Consumer Finance
    Driving Instructor Centre
    Head Office
    Insurance Services
    Invoice Finance
    Vehicle Solutions

    The filtering is not taking effect, the columns are the same. Can anyone help?

    Thanks

    DB:3.15:Re: Navigation m9

    Thanks for your help, will retry all options.

  • RELEVANCY SCORE 3.12

    DB:3.12:Re: Tracking Code 7c


    Please can someone help to find my unlock code please

    DB:3.12:Re: Tracking Code 7c


    Hi @fabionostyle

    If you contact us here,we’ll be able to take a look. Please also have the reference number to hand and the date you submitted the request.

    Thanks

    Michelle




  • RELEVANCY SCORE 3.05

    DB:3.05:Re: Bridge Vehicle Autoloader dj



    Dear customer service,

    Could you please explain the reason the above option was changed in the latest versions of the software?

    Why the load patern and definition of influance surface (it still shows the vehicle icon in the left top corner) do not work with load case defined as the vehicle moving on the route.

    If the option was modyfied and should work with such loads, then could you please provide guide on this?

    Thank you in advance

    Pawel

    DB:3.05:Re: Bridge Vehicle Autoloader dj


    Pawel,

    In such case you are referring to the entirely different functionality which is not available for Robot versions released by Autodesk.

    The influence surfaces option has not been changed and is available with the same range of application for both Robobat and Autodesk released versions of Robot.

    If you find your post answered press the Accept as Solution button please. This will help other users to find solutions much faster. Thank you.




    Artur Kosakowski

  • RELEVANCY SCORE 3.02

    DB:3.02:Re: Drawing Time Tracking fd


    We're interested in implementing a time tracking system, which will indicate who and when opened a drawing, the REAL time spent on it, etc.

    Is there an effective Time Tracking software the anyone can recommend?

    Thanks for your help.

    Orlando Rosario

    DB:3.02:Re: Drawing Time Tracking fd

    Does the cadtempo software work well with Vault?

  • RELEVANCY SCORE 3.01

    DB:3.01:Ivalueconverter Getting Called With Null Value 1s


    Perhaps I made an easy to spot mistake, but I am still fairly new to Silverlight and am having some problems figuring this one out.
    I've got a datagrid bound to an ObservableCollection. The type the collection contains has some properties that are enum values. I used an IValueConverter to convert those values to readable strings and back within the datatemplate column in the grid. I
    fill a combobox with them.
    To reproduce this error, I add an item to my datagrid, delete and item, and then add another.My IValueConverter.ConvertBack(..) gets called with a null value every time.
    I've got nothing to debug through, as the call stack is full of system code from the point I click the add button. Can anyone give some advise on tracking the problem down?
    I'll post some snippets in hopes that the mistake is easy to spot:
    Call Stack:
    GT5_Tracker!GT5_Tracker.Model.CountryConverter.ConvertBack(object value = null, System.Type targetType = {System.RuntimeType}, object parameter = null, System.Globalization.CultureInfo culture = {System.Globalization.CultureInfo}) Line 62C#
    System.Windows.dll!System.Windows.Data.BindingExpression.UpdateValue() 0x290 bytes
    System.Windows.dll!System.Windows.Data.BindingExpression.UpdateValueIfNecessary() 0x27 bytes
    System.Windows.dll!System.Windows.Data.BindingExpression.TargetPropertyChanged(System.Windows.DependencyObject sender, System.Windows.DependencyProperty dp) 0x2b bytes
    System.Windows.dll!System.Windows.DependencyObject.OnPropertyChanged(System.Windows.DependencyProperty dp) 0x17 bytes
    System.Windows.dll!System.Windows.FrameworkElement.OnPropertyChanged(System.Windows.DependencyProperty dp) 0x51 bytes
    System.Windows.dll!System.Windows.Controls.Primitives.Selector.OnPropertyChanged(System.Windows.DependencyProperty dp = {System.Windows.CustomDependencyProperty}) 0x16 bytes
    System.Windows.dll!System.Windows.DependencyObject.RaisePropertyChangeNotifications(System.Windows.DependencyProperty dp, object oldValue, object newValue) 0x5c bytes
    System.Windows.dll!System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.DependencyProperty property, System.Windows.EffectiveValueEntry oldEntry, ref System.Windows.EffectiveValueEntry newEntry, System.Windows.DependencyObject.ValueOperation
    operation) 0xf6 bytes
    System.Windows.dll!System.Windows.DependencyObject.SetValueInternal(System.Windows.DependencyProperty dp, object value, bool allowReadOnlySet) 0x1da bytes
    System.Windows.dll!System.Windows.Controls.Primitives.Selector.UpdatePublicSelectionProperties(int oldSelectedIndex = 0x00000000, int newSelectedIndex, object oldSelectedItem = USA, object newSelectedItem = null) 0x5b bytes
    System.Windows.dll!System.Windows.Controls.Primitives.Selector.SelectionChanger.End() 0x150 bytes
    System.Windows.dll!System.Windows.Controls.Primitives.Selector.OnItemsChanged(System.Collections.Specialized.NotifyCollectionChangedEventArgs e) 0x7e4 bytes
    System.Windows.dll!System.Windows.Controls.ItemsControl.OnItemCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e) 0x52 bytes
    System.Windows.dll!System.Windows.Controls.ItemCollection.NotifyCollectionChanged(System.Collections.Specialized.NotifyCollectionChangedEventArgs e) 0x37 bytes
    System.Windows.dll!System.Windows.Controls.ItemCollection.UpdateItemsSourceList(System.Collections.IEnumerable newItemsSource) 0x10b bytes
    System.Windows.dll!System.Windows.Controls.ItemsControl.ItemsSourceChanged(System.Windows.DependencyObject d, System.Windows.DependencyPropertyChangedEventArgs e) 0x69 bytes
    System.Windows.dll!System.Windows.DependencyObject.RaisePropertyChangeNotifications(System.Windows.DependencyProperty dp = {System.Windows.CustomDependencyProperty}, object oldValue, object newValue) 0x51 bytes
    System.Windows.dll!System.Windows.DependencyObject.UpdateEffectiveValue(System.Windows.DependencyProperty property, System.Windows.EffectiveValueEntry oldEntry, ref System.Windows.EffectiveValueEntry newEntry, System.Windows.DependencyObject.ValueOperation
    operation) 0xf6 bytes
    System.Windows.dll!System.Windows.DependencyObject.RefreshBLOCKED EXPRESSION Line 57 0x24 bytesC#
    ---------------------------------------------
    Button event to Add an item:
    private void btnNewVehicle_Click(object sender, RoutedEventArgs e)
    {
    Vehicle vehicle = new Vehicle();
    Repository.Instance.Vehicles.Add(vehicle);
    }
    ----------------------------------------------
    Button event to remove an item
    private void btnDeleteVehicle_Click(object sender, RoutedEventArgs e)
    {
    Vehicle vehicle = dataVehicles.SelectedItem as Vehicle;
    Repository.Instance.Vehicles.Remove(vehicle);
    }
    ---------------------------------------------
    Repository
    public class Repository
    {
    private static volatile Repository m_instance;
    private static object m_lockInstance = new Object();
    ObservableCollectionVehicle m_vehicles;
    ObservableCollectionRace m_races;

    /// summary
    /// Gets the single instance of this class
    /// /summary
    public static Repository Instance
    {
    get
    {
    if (m_instance == null)
    {
    lock (m_lockInstance)
    {
    if (m_instance == null)
    {
    m_instance = new Repository();
    }
    }
    }
    return m_instance;
    }
    }
    // SNIP
    /// summary
    ///
    /// /summary
    private Repository()
    {
    m_vehicles = new ObservableCollectionVehicle();
    m_races = new ObservableCollectionRace();
    Vehicle vehicle = new Vehicle();
    m_vehicles.Add(vehicle);
    }
    /// summary
    ///
    /// /summary
    public ObservableCollectionVehicle Vehicles
    {
    get
    {
    return m_vehicles;
    }
    }
    // SNIP
    }
    --------------------------
    Datagrid:
    !-- Vehicle Data --
    StackPanel Grid.Row=0 Margin=12,12,0,0
    sdk:Label Name=lblGarage Content=Garage FontSize=16 FontWeight=Bold HorizontalAlignment=Left /

    sdk:DataGrid Name=dataVehicles AutoGenerateColumns=False Width=600 Height=200 HorizontalAlignment=Left Margin=0,10,0,0
    sdk:DataGrid.Columns
    sdk:DataGridTextColumn Binding={Binding Name} Header=Vehicle Width=120 /
    sdk:DataGridCheckBoxColumn Binding={Binding Used} Header=Used Width=60 /
    sdk:DataGridTextColumn Binding={Binding Price} Header=Price Width=120 /
    sdk:DataGridTemplateColumn Header=Country Width=120
    sdk:DataGridTemplateColumn.CellTemplate
    DataTemplate
    ComboBox ItemsSource={Binding Countries}
    SelectedItem={Binding Country, Mode=TwoWay, Converter={StaticResource CountryConverter}} /
    /DataTemplate
    /sdk:DataGridTemplateColumn.CellTemplate
    /sdk:DataGridTemplateColumn
    /sdk:DataGrid.Columns
    /sdk:DataGrid
    StackPanel Orientation=Horizontal Margin=0,10,0,0
    Button Name=btnNewVehicle Content=New Vehicle Click=btnNewVehicle_Click Width=100 Height=23 Margin=390,0,0,0 /
    Button Name=btnDeleteVehicle Content=Delete Selected Click=btnDeleteVehicle_Click Width=100 Height=23 Margin=10,0,0,0 /
    /StackPanel

    /StackPanel
    -------------------------
    Converter from where the exception is coming:
    public class CountryConverter : IValueConverter
    {
    public object Convert(object value, Type targetType, object parameter, CultureInfo culture)
    {
    Country country = (Country)value;
    switch (country)
    {
    case Model.Country.USA:
    return USA;
    case Model.Country.GERMANY:
    return Germany;
    case Model.Country.JAPAN:
    return Japan;
    default:
    throw new Exception(Cannot convert unknown value);
    }
    }
    public object ConvertBack(object value, Type targetType, object parameter, CultureInfo culture)
    {
    string strValue = value as string;
    switch(strValue)
    {
    case USA:
    return Model.Country.USA;
    case Germany:
    return Model.Country.GERMANY;
    case Japan:
    return Model.Country.JAPAN;
    default:
    throw new Exception(Cannot convert unknown value); // Exception thrown here,value was null, why?
    }
    }
    }

    DB:3.01:Ivalueconverter Getting Called With Null Value 1s

    I am kind of forced to use an enum since there will be million of these objects in storage. Storing an int(converted enum)value would be way better than strings. I could just use ints in the class being stored, but i'd still have to write all that conversion
    code for UI.

  • RELEVANCY SCORE 3.01

    DB:3.01:How Can I Setup A Window Server Either 2008, 2003 Or 2012 R2 To Send Sms Text To Cell Phone. fa


    How can I setup a window server either 2008, 2003 or 2012 R2 to send SMS
    Basically we are hosting using window 2008 and 2012 R2a vehicle tracking system and

    have the need to text cell phone with information.

    DB:3.01:How Can I Setup A Window Server Either 2008, 2003 Or 2012 R2 To Send Sms Text To Cell Phone. fa

    This is a System Center Configuration Manager 2007 forum. You should post your question in a Windows forum although to my knowledge, there is nothing built-in to Windows to provide this capability and you will have to implement a third-party solution.Jason | http://blog.configmgrftw.com

  • RELEVANCY SCORE 3.01

    DB:3.01:Shipping fa



    hello, I recently ordered something for my vehicle and a week already past so I checked out my ups tracker through paypal and it said that it got sent back to the sender because I apparently had a wrong address so what happens now?

    DB:3.01:Shipping fa


    hello, I recently ordered something for my vehicle and a week already past so I checked out my ups tracker through paypal and it said that it got sent back to the sender because I apparently had a wrong address so what happens now?

  • RELEVANCY SCORE 2.95

    DB:2.95:Real Time Vehicle Tracking? 8m


    Can virtual earth be used to track vehicles in real time and show them as moving points on the map?

    DB:2.95:Real Time Vehicle Tracking? 8m

    Thanks for the replies! If the TOC says nothing about displaying moving vehicles on the map, and other companies are doing it, it seems like its safe to use. 

  • RELEVANCY SCORE 2.94

    DB:2.94:Re: Polar Tracking ap


    i am running autocad 2002 on windows xp home edition. when i turn on polar tracking the cursor "imprints" itself across the screen leaving a trail of cursor marks on the drawing. if i turn off polar tracking, the cursor still leaves imprints of itself on the screen, but they are fewer. any suggestions?

    DB:2.94:Re: Polar Tracking ap

    I currently have AutoCAD 2002 installed on Windows
    XP Professional. If you have XP Home edition, it is possible that there
    can be problems. Autodesk says that they absolutly do not support autocad
    installed on XP Home, but I have heard of many who have it.

    There is no AutoCAD XP, just AutoCAD 2002.
    Maybe 2002 will give you better results. I never had the chance to try
    2000 on XP Professional.

    Good Luck

    style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
    "Rasoul Khoshravan Azar"
    href="mailto:rasoulaz@hotmail.com"rasoulaz@hotmai​l.com wrote in
    message
    href="news:04AE0CDC7078520E8132EF427B7442CE@in.Web​X.maYIadrTaRb"news:04AE0CDC7078520E8132EF427B7......
    a question off the topix but related to Windows
    XP and AutoCad 2000.

    Is it poosible to install AutoCad 2000 on Windows
    XP.

    I was using AutoCad 2000 on Windows 2000 with no
    problem but now that I have upgraded my OS to Windows XP I can't install my
    AutoCad 2000 on it.

    A responder (dviator) to my other question
    12/7/2002 1:31 AM, "Is there AutoCad XP or 2002" told it is
    possible.
    Where should I look for it.

    TIA
    Rasoul

    style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"
    "uhuru"
    href="mailto:sarahshetter@hotmail.com"sarahshette​r@hotmail.com
    wrote in message
    href="news:f12a88e.-1@WebX.maYIadrTaRb"news:f12a8​8e.-1@WebX.maYIadrTaRb...am
    running autocad 2002 on windows xp home edition. when i turn on polar
    tracking the cursor "imprints" itself across the screen leaving a trail of
    cursor marks on the drawing. if i turn off polar tracking, the cursor still
    leaves imprints of itself on the screen, but they are fewer. any
    suggestions?

  • RELEVANCY SCORE 2.94

    DB:2.94:Re: Autodesk Vehicle Tracking Failed To Retrieve A Licence sx



    I downloaded the 64bit trial version of Autodesk Vehicle Tracking today.

    I've installed the software as a 30 day trial stand-alone on top of AutoCAD Civil 3D 2014 (network license).

    But when I click any of the functions from the Ribbon I get this message:

    "Failed to retrieve a licence"

    Please any help is welcome.

    Kind regards,

    Edward Winter

    DB:2.94:Re: Autodesk Vehicle Tracking Failed To Retrieve A Licence sx


    I just installed the standalone trial. The company I work purchased one network license.




    Vincent Sheehanhttp://polyin3d.blogspot.com

  • RELEVANCY SCORE 2.94

    DB:2.94:Vehicle Tracking j8


    "Real Time" Tracking availability car tracking device? Anybody know of a supplier who sells in quantity? Please advise

    Jon

    DB:2.94:Vehicle Tracking j8

    "Real Time" Tracking availability car tracking device? Anybody know of a supplier who sells in quantity? Please advise

    Jon

  • RELEVANCY SCORE 2.89

    DB:2.89:Google Map Api cc


    Actually I am currently working on GPS project.
    vehicle tracking.
    So I am using Latitude,logitude to locate vehicle.
    vehicle itself send me it's own current latitude longitude values.
    i am saving that values with respective time date in MS access.
    Now problem is that, for google mapping APIs are present in AJAX technology.
    So I don't know how to use AJAX HOw to connect my database with that AJAX.
    Please help me in this problem

    Thanks in advance

    DB:2.89:Google Map Api cc

    http://code.google.com/apis/maps/

  • RELEVANCY SCORE 2.87

    DB:2.87:Re: Turning Radius For Fire Truck mp


    I need to set up a turn-around at the end of a 400' drive for fire truck
    turns. Not a cul-de-sac but a tomahawk. What radius or vehicle type? I
    know, that's a bit like "how high is up?" but let's stipulate a mid
    range vehicle rather than, say, an urban ladder. Any leads appreciated!

    rs

    DB:2.87:Re: Turning Radius For Fire Truck mp

    Re: Turning radius for fire truck

    Laurie, I slaver at the thought. But this time all I really need is the pc equivalent of the turning diagram. I will look it up and check it out but it has to be really inexpensive.

    rs

    You should explain to your boss its unethical for you to be designing life safety facilities like fire truck accesses without the necessary tools and or training.

    I would flat out refuse to take responsiblity for those drawings and certainly wouldn't put my initials on them. (What usually happens when you design something different is after it is built the fire department sends a truck out to test it. Expect a phone call if they can't turn around.)

    If you are forced to design it on a shoestring budget you could consider calling the responding fire hall (not 911) and explain to them what you are designing. They should be able to give you their guidelines and tell you what their biggest truck is. Then call the manufacturer for turning radius or 3-point turn specifications. (I've done something similar for bus stations and facility specific articulated buses. They provided a scale diagram which I was able to scan, import and rescale correctly to check my designs).

    John (geometrics designer)

  • RELEVANCY SCORE 2.86

    DB:2.86:Re: Another Go To Database Home Page Failure jk


    Your tracking number is:

    190276011191208368

  • RELEVANCY SCORE 2.86

    DB:2.86:Tracking On Gps fd


    Is there any way to get the old "Start Tracking" feature on the maps application in the N95?? possibly without re-setting the WHOLE phone?

    Thanks

    DB:2.86:Tracking On Gps fd

    nope that doesnt work as it closes the route

  • RELEVANCY SCORE 2.86

    DB:2.86:Can I Use J2me To Send/Receive Gprs Data? a3


    Hi guys
    Firstly, I hope I'm on the most suitable forum - if not, feel free to redirect me to the best place for this question.
    I'm working on a vehicle tracking project and we're evaluating several devices that are designed to be placed inside vehicles - the devices have GPS capability for vehicle tracking and SMS or GPRS functionality to send or receive data.
    What we'd like to be able to do is to have these tracking boxes relay vehicle positioning information back to a central server PC over GPRS. Also, we'd like the server to be able to send information back to the devices. The tracking boxes do not support Java, so I'm concentrating completely on the server side of things... so here's my question....
    Can I send and receive data to and from these devices over GPRS using something like a GPRS WLAN card? If I can, what's the best way to do this?
    I don't really know too much about J2ME so feel free to "dumb things down" if you need to.
    Thanks a million,
    Jason

    DB:2.86:Can I Use J2me To Send/Receive Gprs Data? a3

    off the top of my head:

    How about sourcing for a SCADA / telemetry package that support GPRS I/O? So you have the scada run time on your server, and you can ask for a GPRS to ethernet card along with it.

    It'd probly not be cheap but if it's a university project you could get a trial / edu version.

    Try wonderware (www.wonderware.com) as they're pretty aggressive in sales.

    I believe J2me is java technology for mobile devices, so J2me is for developing applications that have small memory footprint so that they can be deployed on mobile devices like hand phone and pdas. So, yes, I think you're in the wrong forum!

  • RELEVANCY SCORE 2.86

    DB:2.86:Vehicle Tracking Using Bingmap fj


    Hi,
    I wish to do a vehicle tracking system
    using bingmap silverlight control
    In this applciation I want to update the location of vehicle by reading the vehicle locations from Database
    So I need to conitinuously call a webservice for each vehicle (max vehicle number is 4)
    Please suggest a threading model with asynchronous calls (for reading the database through Web service)
    for this application

    Ajish

    DB:2.86:Vehicle Tracking Using Bingmap fj

    An easy method is to just use a timer or BackgroundWorker and get the latest data every x seconds. Normally a refresh rate of 15 seconds is good for this type of application. Note that vehicle tracking applications fall under a differentlicensingmode
    for online maps. I suggest contacting maplic@microosft.com for more information.http://rbrundritt.wordpress.com

  • RELEVANCY SCORE 2.84

    DB:2.84:Vehicle Ideas 8m



    Tell your vehicle ideas and let's make them together!!

    A vehicle can be ANY size right?




    DB:2.84:Vehicle Ideas 8m

    I made this thread on the US Forums. People were saying stuff like batmobile. Do you think youll be able to make things that glide



    This is james1994

  • RELEVANCY SCORE 2.84

    DB:2.84:Can We Go For Microsoft Virtual Earth Bing Maps Development To Implement Vehicle Tracking System For The Government Enterprise. d1


    Hi Dude,I am .Net Developer planning to develop real-time vehicle Tracking system for the Government Enterprise  with the use of Microsoft Virtual Earth Bing Maps API. I would like to know whether any license agreement has to be entered before doing so. If so, Please Let me know the procedures to obtain the license in order to accomplish the above project(Vehicle Tracking System for the Govt. Enterprise). If not, Can I go for developing the Real-time Vehicle Tracking system with the use of Microsoft Bing Maps SDK which has been defined in the following link : http://www.microsoft.com/maps/isdk/ajax/ without any License agreement. Currently I am in the situation to select the product for effective development in VTS(vehicle Tracking System) and I prefare Microsoft Virtual Earth would accomplish my thoughts.Kindly help me to proceed further for development in Microsoft Virtual Earth Bing Maps. 

  • RELEVANCY SCORE 2.83

    DB:2.83:Send And Receive Sms Through Web Application kd


    I'm developing web application for vehicle tracking. where in i want an sms servicing.

    I had googled. regarding this topic but I'm not able to figured out the best solution.

    My task is to send and receive sms using the sms gateway, through the web application developed in J2EE.

    Can you provide me the detail or the steps to achieve this.

    Thanks in advance.

    DB:2.83:Send And Receive Sms Through Web Application kd

    Hi,

    When I started to achieve this, I had gone through,

    lot's of website, blog to achieve this.

    Finally I achieved that.

    For any new comer who would like to do same task,

    Who would like to find everything need to achieve this,

    I posted the information in my blog,

    that can help for them, and they will not need to go through lot's of website

    just refer this

    http://chetanmenge.blogspot.com/

    Hope this will be useful for them.

    Thanks,
    #1085;e#1090;#945;#951; Menge
    NURV (Never Underestimate Your Radical Vision)

  • RELEVANCY SCORE 2.83

    DB:2.83:Vehicle Tracking System. pk



    my final year project is to make a vehicle tracking system using gps module and gsm modem with the help of atmega16 microcontroller.would you help me in this project?

    DB:2.83:Vehicle Tracking System. pk


    my final year project is to make a vehicle tracking system using gps module and gsm modem with the help of atmega16 microcontroller.would you help me in this project?

  • RELEVANCY SCORE 2.82

    DB:2.82:How To Work With Tracking A Vehicle Using Gps In Sharepoint 2010 mj


    Hi All,
    I am working on Fleet management System and i need some idea about Tracking Vehicle in sharepoint 2010...

    DB:2.82:How To Work With Tracking A Vehicle Using Gps In Sharepoint 2010 mj

    Hi,
    You can add a page view web part in your certain page, and link the web part to yourFleet management System page.
    Thanks,
    Kenon Yin

  • RELEVANCY SCORE 2.82

    DB:2.82:Real Time Gps Tracking In Google Earth fp


    Hi All!!I am a new labview user, working on a project making a boat fully powered on solar energy. (www.frisiansolarchallenge.com)The whole vehicle will be controllerd bij CompactRio Labview PDA, and all the data will be send wireless to the team Car.In the compactrio i am using the Gxxx combo module from Sea-gmbh in germany. I already found some Google Earth examples in onther forums so i can control google earth with labview.The Gxxx combo module provides GPS data (Longitude and Lattitude, Speed, world clock and some other data)I tryed to find out how to get a real time gps from Labview into Google Earth so i can track the vehicle and draw a pad or something like that, but it din't succeed.has anyone experience this before or can someone help me?Greetz Folkert AttemaTanks for your help!

    DB:2.82:Real Time Gps Tracking In Google Earth fp

    Dear Wiebe and AndreMaybey you can contact me via info@solar-team.nlGreetz Folkert

  • RELEVANCY SCORE 2.81

    DB:2.81:Re: Tracking Number [Edited] sk



    Cannot track my hub posted on 17 June. Tricia
    REMOVED

    Moderated: Removed sensitive/personal information

    DB:2.81:Re: Tracking Number [Edited] sk

    Do you mean it is not on your order tracking page via your online Sky account or you cant track it via the Royal Mail website ?



    __________________________________________________________________________________________.

    If someone has helped you then please click on the LIKES button in their post.
    I do not work for Sky.

  • RELEVANCY SCORE 2.79

    DB:2.79:Vehicle Detection And Vehicle Tracking xs



    Hi all,

    I'm trying to construct a vision-based vehicle detection and tracking system on LabVIEW.

    I've searched some method to implement the system:

    (1)Using pattern/geometric matching function

    (The matching mode of pattern matching function seems can't search scaled target;however, geometric matching function can do.

    I have tried to combine them,but failed..and I also wonder that if the pattern matching function can achieve vehicle detection and tracking through camera on moving vehicle.)

    (2)Use classification toolkit to create a custom classifier

    (If I take this method, how can I extract the feature?)

    I'm a newer to LaVIEW,please give me some idea or example,or if there is any other method that can help me to do the work.

    Thank you

    Regards,

    Linda

    e-mail: maktubcq52@gmail.com

  • RELEVANCY SCORE 2.79

    DB:2.79:Best Approaches And Tips For Tracking Vehicle On A Very Short Time Interval ap


    Hi seniors/experts please I need your suggestion/advice. One of the requirements of our application is to provide the vehicle tracking feature in which we are locating our field force by using the Location api on the windows phone and updating in the head
    office main application using WCF.

    Now we are planning to set the geoCoordinateWatcher.MovementThreshold = 100(meters). What I need to know is what type of errors should I expect while logging the location because on every position change I am reporting back to head office and updating the database.
    I am using WCF JSON to transport data do yo u agree with this or shall I go for Socket level.

    Please if there is any other precautionary measurements please please suggest.

    DB:2.79:Best Approaches And Tips For Tracking Vehicle On A Very Short Time Interval ap

    My statement that applications will not run under a locked screen was not quite correct. That is the default action and can be modified.
    See these threads and blog:

  • RELEVANCY SCORE 2.79

    DB:2.79:Crowdsupport 78



    I have a vehicle tracking device which needs a SIM card so that my vehicles location can be tracked on a particular website/software.

    I already have a Telstra usb dongle stick (from my laptop) that has a telstra prepaid Mobile Broadband SIM card in it - it has been recharged has got credit on it. I purchased the Recharge $180 for 12GB over a 1yr period as I am only using the internet from this SIM card from time to time I don't use it for phone calls/sms.

    My 1st question is:

    Can I just take the SIM card out of the USB dongle stick put it in the tracking device? Will it still work?

    I assume I would need to take my tracking device with the usb's SIM card to Tracking software vendor have him marry the device SIM card together so that it would make the tracking device findable on their website.

    My 2nd question is:

    Does this assumption sound correct?

    DB:2.79:Crowdsupport 78


    Thanks. All is good. My dongle SIM works fine in the tracker. Just handed everything to the software guy he set it all up.

  • RELEVANCY SCORE 2.79

    DB:2.79:Re: Parking Stalls Numbering s7



    Is it possible to number the parking stalls on the drawing automatically?




    neilyj(No connection with Autodesk other than using the products in the real world and despite the new rankings I am not an Advisor to Autodesk or anyone else.....) IDSP Premium 2015 (mainly Civil 3D 2015 UKIE Infraworks with some limited 3ds Max Design) Win 7 Pro x64, 500Gb SSD, 1Tb HDD32Gb Ram Intel Xeon CPU E5-2650 v2 @ 2.6GHz (32 CPUs), ~2.6GHzNVIDIA Quadro K4000, Dual 27" Monitor, Dell T5610

    DB:2.79:Re: Parking Stalls Numbering s7


    Hi Joe

    Thanks, that makes it clear. The bay numbering is not the utility to summarisethe number of bays or types of bays. The Parking Report shown below does but only breaks down the total using the categories shown.

    I hope that helps,

    Cheers

    Viji




    Viji.Kumar

  • RELEVANCY SCORE 2.79

    DB:2.79:Re: Autodesk Vehicle Tracking (2014) az


    We have Autodesk Vehicle Tracking 2014. I'm wondering if anyone has found any good training materials that we can use.

    Every "tutorial" I've found seems more like a product demo than a tutorial. They show what it can do but don't explain any of the settings as they go through it.



    Don Ireland

    If a reply solves your issue, please remember to click on "Accept as Solution". This will help other users looking to solve a similar issue. Thank you.

    Do not send a PM asking for assistance. That's what the forums are for. This allows everyone to benefit from the question asked and the answers given.

    Forum links:AutoCAD 2013/2014/2015AutoCAD 2010/2011/2012AutoLISP, VB and other AutoCAD customization
    Civil 3D GeneralCivil 3d Customization
    Other Helpful links:My File is too large to post or I can't post it due to privacy issues!

    DB:2.79:Re: Autodesk Vehicle Tracking (2014) az


    Sounds likeoffseting a pline? I wouldn't expect one leg ot he pline to offset. Perhaps the perimeter needs to be segmented? I'm guessing. My delivery hasn't arived yet, but I am excited to get it.

    Have you checked out toutube? they may not be tutorials but I'm sure we can glean something from them. There must be something some of these go on for more than an hour

    https://www.google.com/search?hl=ensource=hpq=au​todesk+vehicle+tracking+tutorialgbv=2oq=Autodesk​...




    Thank youJoseph D. Bouza, P.E. (one of 'THOSE' People) Civil 3D 2012 2013HP Z210 WorkstationIntel Xeon CPU E31240 @ 3.30 Hz12 GB RamNote: Its all Resistentialism, so keep calm and carry on64 Bit Win7 OS

  • RELEVANCY SCORE 2.79

    DB:2.79:Re: Tracking Problem - Best Buy: Unboxed 87



    I ordered a ps4 with next day delivery, I never recieved a confirmation email or a tracking email that was sent to my inbox, I called customer service it said it had shipped the 24th....but I do not have the order

    DB:2.79:Re: Tracking Problem - Best Buy: Unboxed 87


    Hi tommy_olsen23,

    I'm sure you're excited for that delivery! I was able to locate your order using the email you registered on our forum. I'll be sending you more detailed information via private message shortly, which you can check by signing into the forum and clicking the envelope icon in the upper right-hand corner.

    Enjoy your new PS4!




    Elizabeth|Social Media Supervisor|Best Buy® CorporatePrivate Message

  • RELEVANCY SCORE 2.79

    DB:2.79:Threading Tcp Server kx


    Hi,
    I`m developing TCP Server that use to connec with AVL Devices (Vehicle Tracking).
    Each device start connecting to my server using Static IP Port and start thread that keep connection with device, sometimes device disconnec to my server and start connect again with new thread.
    My problem is that after device disconnect, thread still alive. i need to kill threads after device disconnect.
    Thank YouProg:\Mohammed Galal

    DB:2.79:Threading Tcp Server kx

    You should invoke Read/BeginRead on a server thread for each connected device and close connectionas soon as 0 bytes are read or an exception occurs (connection is terminated). That should also terminate the infinite loopdedicated to that connection
    (which would terminate the threadas well or return it back to the pool). You also need to make sure that Read/BeginRead aren't waiting indefinitely and invoke TcpClient.Close asynchronously after some inactivity timeout which would cause immediate return
    from Read or callback from BeginRead.

  • RELEVANCY SCORE 2.78

    DB:2.78:Re: Osnap Tracking + Floating Commandline df



    I've noticed some issues with Osnap tracking not working consistantly with a floating commandline. It seems to happen especially when trying to track back along an object.

    No problems whatsoever when commanline is docked.

    Can anyone else confirm?

    DB:2.78:Re: Osnap Tracking + Floating Commandline df


    Yes Indeed , and very thank"s for your message because I'se seeking the cause of this very disturbing bug !!Maybe the upcoming SP will Fix it

    Cheers

  • RELEVANCY SCORE 2.78

    DB:2.78:Re: Legs Alignement kf



    Hello:

    I just want to know how can i transform the legs alignements in a roundabout design into lines and circuls and not into little lines as do vehicle tracking, because alignaments are made with lines amb circuls with not decimals radius.

    Thank you. (excuseme for me english)

    Victor

    DB:2.78:Re: Legs Alignement kf


    Hi Victor

    The AVT development team acknowledge that they are aware of your requirement and have informed me that they are investigating the rules that need to be implemented to enable the rounding ofthe relevant parameters.

    Thank you for your patience and help in helping toidentify and define this issue.

    Viji




    Viji.Kumar

  • RELEVANCY SCORE 2.78

    DB:2.78:Re: Tracking User In Logs 7c


    Hi,Use the "Usage tracking option" in workspace for tracking who has used the reports and when it was last accessed.After enabling "Usage tracking option" the output will be captured in the FRlogging.log file with time stamp,user id ,report nameFor Example in FRLogging.log search for below content[Elapsed :0.14] [host:esxs] [jobid:2] [USER:Test][Name:Testchart13]Hope this one helps youThanks,Sreekumar Hariharan

    DB:2.78:Re: Tracking User In Logs 7c

    Thank you Sreekumar and Celvin i'm finally able to do it.. just worked with the FRlogging.log file and created a batch script and macro to get it done!

  • RELEVANCY SCORE 2.78

    DB:2.78:Re: Polar Tracking Switching Off All The Time? m8


    I use polar tracking to work all the time but for some unknown reason it keeps turning off on me. It's been doing this for a wile now (since ADT 2007).

    Does anyone know what is causing this?

    Pierre

    DB:2.78:Re: Polar Tracking Switching Off All The Time? m8

    I guess we wouldn't be posting here if we had it all figured out, huh? Work on Friday? Yeah, right...

  • RELEVANCY SCORE 2.77

    DB:2.77:Adu Vehicle Creation 79


    Create Your own ADU Vehicles! Do it like this:Offical Vehicle Name: Vehicle Nickname:

    DB:2.77:Adu Vehicle Creation 79

    Create Your own ADU Vehicles! Do it like this:Offical Vehicle Name: Vehicle Nickname: Official name: Dropship W-1Nickname: Dropship

  • RELEVANCY SCORE 2.77

    DB:2.77:Re: Vehicle Tracking 2015 - Free Trial - License Issue jx



    I'mtrying to evaluateAutodesk's Vehicle Tracking 2015. I installed it as a standalone license since I'm wanting to do the free trial.

    AfterI open Civil 3D and go to the Vehicle Tracking tab, I can't do anything. I get a license error messege.Apparently sincetheCivil 3D 2015 license is a network license, the Vehicle Tracking won't run with a stand alone license. I tried to reinstall and do a network license but the free trial isn't an option for network license.

    How can I get the free trial to work?










    Attachments:






    VTrack-Lic-error.jpg ‏25 KB

    DB:2.77:Re: Vehicle Tracking 2015 - Free Trial - License Issue jx


    I installed the free trial and it has interfaced with my autocad and does not work and it does not have an uninstall associated with it so I suppose i will have to use the repair function to remove it. Thanks, they should tell you at the download page not to install on a system with a network license.

    As for installing it at home, I get enough face time at work with Autocad and have better things to do at home.

  • RELEVANCY SCORE 2.76

    DB:2.76:Usage Tracking Subject Area In Obiee 11 Not Visible In Answers 8f


    Hi All,

    I implemented Usage tracking in OBIEE 11G, set the permissions to every one in presentation layer of the rpd. Re started the server, I am able to see Usage Tracking dashboard but not able to see Usage Tracking Subject area in the Answers.

    Please help me..

    Thanks,
    LonaD

    DB:2.76:Usage Tracking Subject Area In Obiee 11 Not Visible In Answers 8f

    Hi,

    I tried to set privileges under Administration-Manage Privileges-Add respective role to that SA,
    here the respective role is not showing up to add in search. However i have already Created Application Roles and Assigned User Groups to Roles.

    Please help.

    Thanks,
    LonaD

  • RELEVANCY SCORE 2.76

    DB:2.76:Re: Usage Tracking md


    Usage tracking settings should not affect your scheduler settings. Check the schema created for scheduler. Check the connectivity from your application server to database . Try tnsping..

    Regards,
    Sandeep

    DB:2.76:Re: Usage Tracking md

    Thanks for your input, I found the problem by going back over the job config - my version control did not include this element - but a small repeat of config and I am good to go again...

    thanks anyway,

    Robert.

  • RELEVANCY SCORE 2.75

    DB:2.75:Tracking Legality km


    I'd like to use the Bing Maps WPF control for a vehicle tracking commercial application. Does this fall within the license agreement?Fabricio Rodriguez Pretoria, South Africa

    DB:2.75:Tracking Legality km

    Thanks RichardFabricio Rodriguez Pretoria, South Africa

  • RELEVANCY SCORE 2.75

    DB:2.75:Re: Saving Form Element Values sc


    I have my own back button. Session tracking using what?

    DB:2.75:Re: Saving Form Element Values sc

    But javabeans are just java classes. Nothing crazy about them...I guess perhaps I don't understand your problem.

  • RELEVANCY SCORE 2.73

    DB:2.73:Re: z3


    Does anyone have or seen any cad drawings showing typical design vehicles
    and their turning paths?

    Thanks,

    Aaron Barnhart
    Marshall Engineering and Surveying, Inc.
    www.marshalleng.com

    DB:2.73:Re: z3

    Thanks for everyone's replies... I think I figured out what I need to know.

    Thanks,

    Aaron Barnhart, EIT
    Marshall Engineering and Surveying, Inc.
    www.marshalleng.com

  • RELEVANCY SCORE 2.73

    DB:2.73:Fertige Mapping Applikationen Fr Personal Tracking Und Vehicle Tracking aa


    Hello,wir planen eine Trackingapplikation fr Fahrzeuge und Personen zu launchen. Wir wollen allerdings das Rad nicht neu erfinden, daher habeb wir auch kein Interesse daran die Webapplikationselbst zu entwickeln.Kennt jemand eine Firma an die man das outsourcen kann? Voraussetzung: Die Applikation muss auf unserer Seite laufen!

    DB:2.73:Fertige Mapping Applikationen Fr Personal Tracking Und Vehicle Tracking aa

    Hello,wir planen eine Trackingapplikation fr Fahrzeuge und Personen zu launchen. Wir wollen allerdings das Rad nicht neu erfinden, daher habeb wir auch kein Interesse daran die Webapplikationselbst zu entwickeln.Kennt jemand eine Firma an die man das outsourcen kann? Voraussetzung: Die Applikation muss auf unserer Seite laufen!

  • RELEVANCY SCORE 2.73

    DB:2.73:Moble Phone Tracking ks



    Someone has been following me with that Follow mee QPS tracking device .How do I stop this ? Re booting phone dose not work. This is very frustrating.

    DB:2.73:Moble Phone Tracking ks

    theresatyson wrote:

    Someone has been following me with that Follow mee QPS tracking device .How do I stop this ? Re booting phone dose not work. This is very frustrating.

    Not sure if this is forum to report this problem? has it anything to do with XFINTIY COnnect App on your device?

  • RELEVANCY SCORE 2.73

    DB:2.73:Re: Tracking/Order Shipping Issue - Best Buy: Unboxed k1



    Hey Maria, I'm also having trouble with an order.I pm'ed my information. Ty

    DB:2.73:Re: Tracking/Order Shipping Issue - Best Buy: Unboxed k1


    Hello Giants2k15,

    Yikes! Our online ordering process is supposed to be a quick and easy process, so I’m sorry to hear that something went wrong. As I’d like to help, please check your private messages by making sure you are logged into the forum and clicking on the envelope in the upper right hand corner so that we may discuss this in greater detail.

    Thank you for posting!




    Alex|Social Media Specialist | Best Buy® CorporatePrivate Message

  • RELEVANCY SCORE 2.71

    DB:2.71:Blackberry 8120 Pearl Bluetooth Reconnection With Gm Vehicle, Hummer H3t jf


    THE NEW HUMMER H3T HAS BLUETOOTHEQUIPPEDWITH THE VEHICLE, PAIRING THE PHONE TO THE VEHICLE IS A PIECE OF CAKE AND THE SYSTEM WORKS GREAT, BUT WHEN THE VEHICLE IS TURNED OFF AND YOU TRY TO RE-ESTABLISH CONNECTION, WHEN YOU TURN THE VEHICLE BACK ON, THE RE-CONNECTION FAILS/TERMINATEDEVERY TIME.. THE BLUETOOTH FEATURE IS NEW TO GM VEHICLES SO EVEN THE DEALERSHIP IS HAVING TROUBLE WITH THIS ISSUE

    DB:2.71:Blackberry 8120 Pearl Bluetooth Reconnection With Gm Vehicle, Hummer H3t jf

    Exact same problem with my BB and 09 Malibu... anyone found a solution?

  • RELEVANCY SCORE 2.70

    DB:2.70:Re: All Terrain Vehicle Models j7


    Does anyone happen to posses a model of Hummer or similar type of all terrain vehicle? If that somebody would be willing to share it, i would be most grateful.

    As discussed in similar thread three years back (http://discussion.autodesk.com/thread.jspa?messag​eID=656990), there is a vast range of 3ds-models available, but nothing in solid format.

    greetings,
    Tero

    DB:2.70:Re: All Terrain Vehicle Models j7

    I did catch the essence of John's evil grin even without seeing it, i just played along. I don't expect him to start modeling his car for me...unless he wants to .

    Again, seriously, it would be nice to download solid vehicle models from somewhere as easily as surface models. Even simplistic versions would do just fine in most cases. At the moment, there are none as fas as i can find.

    Tero

  • RELEVANCY SCORE 2.70

    DB:2.70:Re: Plot Tracking jj


    Is anyone aware of a decent software package that would automatically track
    all plots from multiple users?

    Thanks,

    Joe

    DB:2.70:Re: Plot Tracking jj

    we use Pcounter also, not a bad piece of software.
    batch plotting was a bit of a challange until we were able to turn on the auto response feature.

    Paul Caruthers

  • RELEVANCY SCORE 2.70

    DB:2.70:Gprs Listener Server 81


    I am going to develop a GPRS listener server application. The application will listen to the messages send by AVL vehicle tracking devices and also reply to the device by using IP address and a port. Can anyone guide me, how start this application, so it can communicate with AVL device?

    DB:2.70:Gprs Listener Server 81

    JavaFX isn't really designed to work on the server side...

  • RELEVANCY SCORE 2.70

    DB:2.70:Re: Vehicle Turning Radii kf


    i have been unable to flind anything in LDDT or civil to check truck turning radii on the site plans i am laying out. i still take out my acetate templates and spin them around on a print. if third party software is the answer, any suggestions

    DB:2.70:Re: Vehicle Turning Radii kf

    On Fri, 14 May 2004 12:24:04 -0400, John Mayo wrote:

    Try AutoTrack from Savoy (a British co.). Very stable, easy to use, standard
    libraries...

    I've used AutoTrack as well - mainly because it had Australian Standard
    Cars/Trucks. (and was the first one we found that we liked)

  • RELEVANCY SCORE 2.69

    DB:2.69:Pairing Issue With Bluetooth On 2013 Kia Sorento m1



    My blackberry 9900(os 7.1 bundle 2108) will not stay paired with new vehicle we just purchased. I have to set it up each time the phone disconnects from the car, or vehicle turns off, etc. I've deleted and re-paired a number of times, updated software to most recent version and still no good. Any suggestions out there?

    DB:2.69:Pairing Issue With Bluetooth On 2013 Kia Sorento m1

    I'm in the same boat as you BMcintosh. I have exactly the same model (Bold 9900) and the 2013 Sorento. When I first got the car the BB paired perfectly. Now it pairs but the keypad on the car Nav screen doesn't work. Then the screen tells me I'm connected to a call when in fact I'm not. I've tried every tip that's available on the net and this forum. I'm upgrading to 7.1.0 Bundle 1424 in the hopw that this might fix the problem. It's definitely a Blackberry problem as my wife's iPhone pairs perfectly and the car's Nav screen with the keypad and contacts from the phone all work perfectly. Blackberry needs to step up and fix these problems!

  • RELEVANCY SCORE 2.69

    DB:2.69:Canada Eh! mp


    Small company in Canada checking out the XR9 and the Routerstation Pro. Possible use will be for mobile vehicle tracking with two way communications on airport airfields. If anyone has info on using this equipment with multiple AP's. Let me know how well it works.Thanks

    DB:2.69:Canada Eh! mp

    Small company in Canada checking out the XR9 and the Routerstation Pro. Possible use will be for mobile vehicle tracking with two way communications on airport airfields. If anyone has info on using this equipment with multiple AP's. Let me know how well it works.Thanks

  • RELEVANCY SCORE 2.69

    DB:2.69:Delete User Tracking Database cs



    Dear Sir,

    Can you tell me how to delete all of the user tracking database, then it can re-learn again.( My Ciscoworks version is LMS 2.2 )

    Best Regards,

    Jackson Ku

    DB:2.69:Delete User Tracking Database cs


    See this post:

    http://forums.cisco.com/eforum/servlet/NetProf?page=netprofforum=Network%20Infrastructuretopic=Network%20ManagementCommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc836f/4#selected_message

  • RELEVANCY SCORE 2.69

    DB:2.69:Re: Autodesk Vehicle Tracking 2014 Trial Version ak



    I'm trying to install theAutodesk Vehicle Tracking 2014 Trial Version and keep getting a message that says: "The procedure entry point inflateEnd could not be located in the dynamic link library zlib.dll" after which the installation closes. Any ideas?

    I have a standalone 2014 Premium Infrastructure Design Suite installed on a Windows 7 machine.







    Solved!
    Go to Solution.

    DB:2.69:Re: Autodesk Vehicle Tracking 2014 Trial Version ak


    There is not a lot of chatter on here about Autodesk Vehicle Tracking but I've yet to get my trial version installed, thanks for the Intallation notes, much appreciated. Out of curiosity do the "junctions" part of the software offer some sort of intersection design tools or is it only specific to Roundabouts?

    I personally wouldlike to see the Intersection tool in Civil 3D migrate to something like the tool they've purchased here for Autodesk Vehicle Tracking. Mores specifically theautomated Roundabout design tools, then thecreation of Civil 3D corridors... I watcheda presentatoin from the Savoy crew from the UK (not sure on spelling) at this year's AU, they designed a roundabout and created a corridor in about 20mins. Tweaking linework alone when adjusting a roundabout design would usually take hours vs. the new workflow provided by Autodesk Vehicle Tracking. I heard AVT is on sale for 50% until end of April! The tools available here far exceed what I'm getting out of myAutoTURN license.

  • RELEVANCY SCORE 2.69

    DB:2.69:Hi 1j


    i am on a project of tracking vehicle on a city map;
    i have set map image on jlabel;
    i want to superpose a point on the map according to the location of the vehicle. i painted oval on the map but when scrollbar is moved the point
    is vanished; i wnat them to be permanent on the map image ; i have auto focused the map;
    can u help me?
    please;

    DB:2.69:Hi 1j

    wouldn't a glass pane cause the oval to be in the wrong position when the user scrolls?Yes, you are probably correct.

    Stick with overriding the paintComponent() of the label.

  • RELEVANCY SCORE 2.69

    DB:2.69:Re: Tracking 3k


    Cant seem to make tracking work for me.
    Start the Line command,
    select temp tracking
    pick first point

    then autocad beeps at me.......???

    Can anyone give me a quick overview. This was so simple in 14.

    Fitz

    --
    William D. Fitzpatrick Jr. (fitzx2@provide.net)
    MacMullan Architects, P.C.
    308 N. River Ypsilanti, Mi 48198
    "AutoCad!! Everything else is just a toy."

    DB:2.69:Re: Tracking 3k

    Wayne,

    You can still add tracking back in your toolbar. What I did was add it to
    my shift+right click popup menu. I did not like the fact that Autocad
    removed it from the toolbars either. It is Fixable though, the command is
    still there.

    Wayne Capra wrote in message
    news:7th091$g0l5@adesknews2.autodesk.com...
    Is it just me or do others miss the simplicity of ACAD 14's tracking and
    Direct Distance functions. I'm finding it extremely difficult to draw or
    edit anything in A2K!
    After acquiring a tracking point, for a second point of displacement, and
    entering a Direct Distance value sometimes the second point is placed
    relative to the tracking point (as desired) and sometimes relative to the
    base point (not desired). Removing the tracking point created at the base
    point (caused by picking slowly) is necessary to avoid this. Tracking
    actions don't seem to work at all if Ortho is on. Turning Polar on or off
    also affects results.
    The most frustrating is that A2K only allows one move from a tracking
    point,
    where ACAD 14 allowed making several moves before settling on a point.
    It's
    no longer possible to set a point multiple Direct Distance entered values
    from a reference point e.g. x=+1, y=+1. The old ACAD 13 From only allows
    this by entering @1,1. This was much easier with the ACAD 14 Tracking and
    Direct Distance combination. I feel like we've been sent back to ACAD 13
    on
    this feature.

    Wayne Capra

  • RELEVANCY SCORE 2.68

    DB:2.68:Future Vehicle... 9c



    In the future, when life is great and money flows freely into the bank account and stops...and I have saved enough to purchase another vehicle...

    How do I protect my credit report from dealership vultures?

    I recently learned that some dealerships pull credit using your driver's license information while you test drive.

    I have had a cash policy for years. If I can not afford to pay cash the car, then I need to re look at some things.

    DB:2.68:Future Vehicle... 9c

    How do you put a "freeze" on your credit report?

  • RELEVANCY SCORE 2.68

    DB:2.68:Re: Tracking Cookies And Foxfire zx


    Are tracking cookies bad? Is Foxfire safer than safari?

    DB:2.68:Re: Tracking Cookies And Foxfire zx

    Thank you for advise concerning cookies and foxfire. I have research on my Mac. that is delicate and worry of tracking. I have added so much security that cookies are usually rejected by my system. As this limits my browsing ability, it assures me that my research is safe.

  • RELEVANCY SCORE 2.68

    DB:2.68:Wearable Vehicle 1a



    Is it possible to make a wearable vehicle?

    DB:2.68:Wearable Vehicle 1a


    Perhaps the easiest way is to create a basic vehicle that rezzes and attaches more complicated parts when you sit on it. You cannot force someone to sit on a vehicle, but you can certainly send a message that asks a person to sit. I suggest that you read the Linden Vehicle tutorial that I referred to earlier and then get hold of a couple of freebie vehicles to dissect and study carefully.




    Not as dumb as I look

  • RELEVANCY SCORE 2.68

    DB:2.68:How Do I Display Two Open Programs On A Large Screen For One Minute Alternatively a1


    I wish to display a vehicle tracking program, and an Excel spreadsheet on a large 46 screen for aone minute each rotation. they are installed on a Windows 2003 server and will be running under Remote Desktop\Terminal Server

    DB:2.68:How Do I Display Two Open Programs On A Large Screen For One Minute Alternatively a1

    Hi SorcererValkyrie,

    The issue that you’ve posted is better suited in the TechNet Forums. Please post your query in the link for further assistance.

    http://social.technet.microsoft.com/Forums/en/category/windowsserver

  • RELEVANCY SCORE 2.68

    DB:2.68:Re: Polar Tracking From Alisp m1


    I want to thank Frank Oquendo for his answer to toggling on Polar Tracking
    from Alisp.

    ;;(setvar "autosnap" (boole 6 (getvar "autosnap") 8));;

    I also need to test whether Polar Tracking is currently on before toggling
    it. How would this be done?

    Appreciate the help

    Donald E. Butler

    DB:2.68:Re: Polar Tracking From Alisp m1

    If your intention is to turn a bit off in a number
    unconditionally, then you don't test and then toggle
    it, contrary to what others are showing.

    This unconditionally turns off polar tracking:

    (setvar "autosnap"
    (logand (getvar "autosnap") (~ 8))
    )

    Chico_Don wrote:

    Thanks alot Mike (and Paul)!

    This is one function I have never quite understood. This and the BOOLE
    function.

    What is the syntax for LOGAND?
    Does it return 8 if the 8 bit is set in this instance?
    Do the other bit codes return their bit code values as well?

    Thanks again

    Don Butler
    dbutler@butler-plumbing.com

    Michael Puckett wrote in message
    news:ef326f0.2@WebX.SaUCah8kaAW...
    Doh, thought I had looked at the A2K help.

    In that case ...

    (progn
    (if (eq 8 (logand 8 (getvar "autosnap")))
    (princ"\nPolar tracking is on.")
    (princ"\nPolar tracking is off.")
    )
    (princ)
    )

    Thx Paul.

    ______________________________________

    "Paul Turvill" wrote in message
    news:ef326f0.1@WebX.SaUCah8kaAW...
    Turns on polar tracking. Your quote is from the R14 Command Reference;
    A2K added 8, 16 (object snap tracking), and 32 (tooltips) to the list.
    ___

    "Michael Puckett" wrote in message
    news:ef326f0.0@WebX.SaUCah8kaAW...
    What does value 8 correspond to for Autosnap?

    Autosnap ---

    0 Turns off the Marker, SnapTip, and Magnet
    1 Turns on the Marker
    2 Turns on the SnapTip
    4 Turns on the Magnet

    --

    Checkout the AcadX(tm) ActiveX Extension Library at:

    http://www.caddzone.com/acadx/acadx.htm

    /*************************************************​********/
    /* Tony Tanzillo Design Automation Consulting */
    /* Programming Customization for AutoCAD Compatibles */
    /* --------------------------------------------------​--- */
    /* tony.tanzillo@worldnet.att.net */
    /* http://www.caddzone.com */
    /*************************************************​********/

  • RELEVANCY SCORE 2.68

    DB:2.68:Looking To Hire Someone To Write A Vehicle Maintenance Database 3j


    To anyone interested, we are looking for a vehicle maintenance database for our fleet of 11 vehicles. We are a small company and we do a lot of our preventative maintenance in house. Our employees take the vehicles home with them and there lies the
    problem with tracking the services. So we are looking for a vehicle maintenance database to track our services with reminders. we like to track oil changes every 10k, trans service every 60K, brake fluid flush every two years, etc. we have a server
    and three workstationsall with access 2010 or 2013. We have not been able to find anyone local that we could afford. I think the downloaded templatevehicle maintenance will work with some modifications. If anyone is
    interested, please let me know. Thank You

    DB:2.68:Looking To Hire Someone To Write A Vehicle Maintenance Database 3j

    Hello,
    There are specific sites to get free lance code done.
    I'd do a Bing search for free lance coder or free lance programmer
    KarlWhen you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?=\G.{2})'|%{if($_){[char][int]0x$_}})

  • RELEVANCY SCORE 2.68

    DB:2.68:Challenge: Clocking A Waveform In Reverse x9



    Hi All,

    I have an application that simulates a moving vehicle.

    This vehicle has a number of characteristics that are represented by waveforms.

    As the vehicle speed increases, the waveform compresses accordingly.

    The waveforms are incremented in milimeters, so each dt represents 1mm

    I use a counter timer to clock the waveform. By changing the Frequency I can change the speed of the vehicle (1 hz = 1 mm/second).

    This method becomes problematic when you want to go in reverse.

    At the moment, I have a mirror image of the waveform that I have to offset and re-load

    Does anyone know of a clever way to get an m-series (6229 et al) to reverse clock a waveform with out fliping and re-loading?




    iTm - Senior Systems Engineeruses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

    DB:2.68:Challenge: Clocking A Waveform In Reverse x9


    I guess I am thinking too Low Level,

    There are a number of CMOS Counters (74xx/40xxx) that have an Up/Down Clock Functionality.

    Other applications:

    Image Processing - First person shooters games - Look Left, look Right,

    Displays with scrolling dot matrix Text.

    I used to work with Seiko 20col,2row character LCD's that would have an 80 character memory and you would clock up/down to display different sections of text in RAM..

    The applications exist,

    I was wondering if the HW designers at NI had considered the possibility.

    I could save my application a bunch of processing if it did.




    iTm - Senior Systems Engineeruses: LABVIEW 2012 SP1 x86 on Windows 7 x64. cFP, cRIO, PXI-RT

  • RELEVANCY SCORE 2.67

    DB:2.67:Re: Error On Snowflake, No Workaround 8f


    You should avoid the snowflake completely in the BM.

    The model you have described seems to indicate that there is a relationship between Mec Date and Vehicle. If that is true then MEC date should become an attribute of the Vehicle Dimension.

    DB:2.67:Re: Error On Snowflake, No Workaround 8f

    Happy to help - good luck with the rest of your project.

  • RELEVANCY SCORE 2.67

    DB:2.67:Re: Tracking Short Cut zk


    What happened to "TK"?

    How can i customize the Tracking Command back to TK - i have to type T-R-A-C-K every time, it used to be just TK. I have tried through the .pgp but that dont work.

    Little help please - Thanks.

    B

    DB:2.67:Re: Tracking Short Cut zk

    If they have made it "tra", I would assume that it has finally been made
    like all the other osnap inputs.

    wrote in message news:4811796@discussion.autodesk.com...
    TT does not work, i found TRA does, but still would like to know if i can
    even shorten that down.

  • RELEVANCY SCORE 2.67

    DB:2.67:Re: Plot Tracking Programs Such As Smart Plot cs


    We have a custom lisp for plot tracking. We are having issues with it so are investigating going with Smart Plot.
    Any suggestions for a plot tracking software? No reprodesk is not an option
    Any preferences between the version 3 or 4 of smart plot?

    --------------------------
    Dave Lewis
    CAD Manager
    http://www.cadthinking.com

    Just say no to HTML Posts!

    DB:2.67:Re: Plot Tracking Programs Such As Smart Plot cs

    I'll second this one. We use's Terry's package every day across 55 installed
    seats. One of the best utility packages for Acad out there.

    --
    James Wedding, P.E.
    IT Manager
    Jones Boyd, Inc.
    Dallas, TX
    XP/1 on P4-1.6/512
    LDT2004+C3D

  • RELEVANCY SCORE 2.67

    DB:2.67:Basic Question On Sap Event Management In Sap Erp Logistics - Transportation Vehicle Tracking kf



    Dear Experts,

    We are planning to implement ERP ECC 6 SD Transportation Module along with SAP Event Management for shipment/vehicle tracking.

    Currently we do have SAP ECC 6.0 Ehp5 system along with SAP Netweaver Portal 7.3 SP07.

    The requirement is to track the transportation vehicles from the starting point to the ending point.

    We've has not planned to implement SAP SCM, however using SAP ECC 6.0, SAP Event Management module has to be implemented.

    Following are the grey areas we would like to un cover before the start.

    How SAP EM has to be installed in SAP ECC 6.0 Ehp5? Installing the Software Component Event Manager (SCM-EM-MGR) would do the job?What are the SAP skill set(s) required for developer(s) to work on the implementation?There is a scope to implement mobile tracking for the transportation vehicle as well.At any given point of time if an issue occurs, exception has to be raised intimated to the concerned line official.

    Many thanks.

    DB:2.67:Basic Question On Sap Event Management In Sap Erp Logistics - Transportation Vehicle Tracking kf


    Hi,

    for the installation please have a look at the note 1320497. You need to install SCEMSRV 701 on SAP ERP 6.0 EhP5A developer needs ABAP knowledge and would be a plus if a developer also has knowledge on SD like nowing the tables etc. Mobile tracking - there is so far no mobile app available for SAP EM so far. Or do you mean something else?If an event is overdue you can set up the system in a way that at this point in time SAP Alert Framework is called. Within this framework it is possible to e.g. send e-mails or SMS. The same is possible when an event occurs.

    Best regards

    Berthold

  • RELEVANCY SCORE 2.66

    DB:2.66:Thread: Novell Instant Messenger Tracking x8


    Can anyone provide with some information on what kind of message tracking

    I can do as an administrator for Groupwise Messenger 2? I work in k-12

    and we\'re thinking about implementing GW Messenger, but only if we really

    have some good options for tracking dowm inappropriate messaging.

    DB:2.66:Thread: Novell Instant Messenger Tracking x8

    Archive Agent comes with the Messaging agent, AFAIK.

    You need to configure it through Consoleone, etc.

    Did you check this?

    http://tinyurl.com/24cgjr

    Basically, when you enable it each session will have a little icon at the

    bottom saying that this convo is being logged or something like that.

    If you are an authorized searcher, you\'ll get a new option in the client

    that allows you to search the archive.

    HTH

    knowltonm@sterling.edu wrote in message

    news:9O3wh.12089$Sz4.11221@prv-forum2.provo.novell.com...

    Thanks for the info. I\'ve got it turned on and it has some files in the

    store directory. How do I go about viewing conversations and searching

    for certain keywords? Also, this is an evaluation version, how/where do

    I put in licensing information to upgrade it? Does it come with

    groupwise or is it seperate. I\'m already licensed for Groupwise 7.

    The archive agent work independently of the local history file. The

    agent

    runs on the server and is configured via an administrator.

    Check http://tinyurl.com/24cgjr

    knowltonm@sterling.edu wrote in message

    news:B5Lvh.11122$Sz4.10725@prv-forum2.provo.novell.com...

    Mark...

    Is there some documentaion on how to do this and not let students

    delete

    their own history?

    You can archive all messages, and as an administrator you can search

    through

    all messages, either for all or individual users.

    regards,

    Mark

    knowltonm@sterling.edu wrote in message

    news:Iopuh.8311$Sz4.873@prv-forum2.provo.novell.com...

    Can anyone provide with some information on what kind of message

    tracking

    I can do as an administrator for Groupwise Messenger 2? I work in

    k-

    12

    and we\'re thinking about implementing GW Messenger, but only if we

    really

    have some good options for tracking dowm inappropriate messaging.

  • RELEVANCY SCORE 2.66

    DB:2.66:Re: Tracking Of Missing Transaction Nos x3


    Posted sample data please go through.

    thanks
    satya

    DB:2.66:Re: Tracking Of Missing Transaction Nos x3

    NOT TESTED !
    with
    the_range as
    (select the_min,
    to_number(ltrim(substr(the_max,4),'0')) - to_number(ltrim(substr(the_min,4),'0')) + 1 steps
    from (select max(tranno) the_max,
    min(tranno) the_min
    from tx_table
    )
    ),
    all_nums as
    (select 'CB02' || lpad(to_char(level),8,'0') every_tranno
    from dual
    connect by level = (select steps
    from the_range
    )
    )
    select every_tranno missing_tranno
    from (select every_tranno,
    tranno
    from all_nums,
    tx_table
    where every_tranno = tranno(+)
    )
    where tranno is null
    and every_tranno = (select the_min
    from the_range
    )

  • RELEVANCY SCORE 2.66

    DB:2.66:Converting Pdf To Excel, Maintain Format? a1



    Hi,

    I am trying to convert a PDF version of a Log book (generated by my vehicle tracking system) into Excel, but the formating is not maintained and only one random page kept the format. The rest is unusable. Any ideas how I can maintain the integrity of the formatting?

    Thanks

    DB:2.66:Converting Pdf To Excel, Maintain Format? a1


    Hi Joanne,

    Would you mind sharing a bit more information? Was your original document excel prior to PDF?

    If you would like you can send it directly to me and I'd be happy to take a look? Please email: stacy@adobe.com

    Looking forward to hearing back from you.

    Regards, Stacy

  • RELEVANCY SCORE 2.66

    DB:2.66:Vehicle Tracking Devices pa



    I'm looking at buying a cheap tracking device to fit into my classic car. Most, if not all, currently utilise a 2G SIM card for communication purposes. My question is : What would be the cheapest way of puchasing a 2G SIM card to put into my new device ? The most basic tariff would be adequate. Some of the more expensive devices charge upwards of £120 per annum for the privelage of a subscription. Admittedly they will provide instant access to vehicle location (for fleet operators or trucking), but I just need it if the car ever gets stolen. Any cheap suggestions out there

    Andy G.







    Solved!
    Go to Solution.

    DB:2.66:Vehicle Tracking Devices pa


    @ bambino, they will if it is on the approved list.




    My Opinions are my own but if you do not like them it is because I am telling you the way it is.

  • RELEVANCY SCORE 2.66

    DB:2.66:Line Following Robot x1


    Hello!
    What would be the best Mechanical Design for a line tracking robot?
    What is better to choose a front drive vehicle or a rear drive vehicle, considering that the robot is heavy; in other words what is better for the motors to drag (pull) the load or push it?
    What would be the best H-Bridge circuit for this purpose?
    Have there been any Line Tracking Robots projects at universities in USA or UK, what were the best procedures, if yes has any information been uploaded online, if yes then where?
    Kindly respond.
    Thank you for your time.

    DB:2.66:Line Following Robot x1

    Your question is too general to answer. What sort of line are you following -- black or white, how wide, etc.? How big can the robot be? How many wheels do you want it to have?
    There have been robotic line following competitions formany years. There are even kits for line following robots that you can buy on the Internet. However, it sounds like you want to build your own robot. In that case look at one of them many web sites
    that sell parts for robots. They are easy to find.
    If you want to use RDS you will either have to write the services for your robot or use one of the robots that we provide samples for. For instance, it is quite possible to build a line following robot using a LEGO NXT and light sensors. Search the forum
    for more information.
    Trevor

  • RELEVANCY SCORE 2.66

    DB:2.66:Re: Creating Subclasses Dynamically mc


    public class Vehicle {Protected Sting reg;}

    public class Car extends Vehicle
    (public void print(){System.out.println(reg);}}
    These classes (or different ones) are stored in one
    text file.For some reason, only one top level class in a file is
    allowed to be public. I don't know why. All classes in
    the file will be in the same package, the default
    package if the name isn't specified.

    DB:2.66:Re: Creating Subclasses Dynamically mc

    Read the book at
    http://docs.rinet.ru:8083/Junleashed/!index.htm to
    make your decisionAbout what?

  • RELEVANCY SCORE 2.65

    DB:2.65:Re: Object Snap Tracking? 11


    Is Object Snap Tracking available in LT? Can it be an add on?

    I was trained at an Autodesk ATC site specifically was told that it was available in LT. Thanks!

    DB:2.65:Re: Object Snap Tracking? 11

    The short answer to your question is No, AutoCAD LT does not include the
    Extension object snap. It doesn't have Parallel either.
    --
    Dave Byrnes / Vancouver, BC
    Autodesk Discussion Group Facilitator

    wrote in message news:5006597@discussion.autodesk.com...
    since you are talking about object snaps, i thought you might be able to
    answer a query.....? i have just started using '2006 LT' and cant find the
    'Extension Object Snap' tool in 'Drafting Settings' - having only used
    autocad 2004 before, its very frustrating not being able to extend a simple
    line........does the tool exist in 2006 LT?

  • RELEVANCY SCORE 2.65

    DB:2.65:Favorite Vehicle xz



    WHAT IS YOUR FAVORITE VEHICLE?

    DB:2.65:Favorite Vehicle xz

    mirage3145 wrote:I like the Space Devastator (the flying section of the Bug Obliterator). I also agree with Aaron, the Eradicator Mech looks very cool!
    I got it for my brother for his birthday.




    Homeschooled Christian Musician, Author of the "All That Has Happened" Stories, Creator of "Gallery Contest"Real Friends are like GilGaladHighKing,Happy Happenings! -ÃⒶɍℴṋṥ⓼⓶⓹

  • RELEVANCY SCORE 2.65

    DB:2.65:Vehicle Wise Loan Tracking cc



    Dear Friends,

    In one of our client place, new car loans are availed frequently. Need to track Vehicle wise loan status at any point of time. Anyone can tell the SAP best and simple business process.

    Regards,

    nms

    DB:2.65:Vehicle Wise Loan Tracking cc


    The suggestion that comes to my mind is to maintain seperate GL accouts for each car loan account and thus we can track the loan balances of individual carwise.

    Other suggestion would be to create different car loans as Vendors with different vednor codes and assign it to a reconcilation account. So you can get the summarised balance from the Reconcilation account and individual balances from the vendor balances.

    Regards

    V.Krishnan

  • RELEVANCY SCORE 2.65

    DB:2.65:Internal Order m8



    Dear Guru's

    I have an scenario where in i have 400 telephone lines and 200 motor vehicles and currently they tracking each telephone line wise and each motor vehicle wise cost.

    Now in SAP how can we Map this process scenario.

    Can we suggest internal order and is there any alternative solution is there.

    Regds,

    KK

    DB:2.65:Internal Order m8


    Hi KK,

    The best option is to suggest them of Statistical internal order.

    Every telephone line or Motor vehicle should be created as an Statistical internal order.

    The best part is you dont require settlement of the same as when ever you post the related expenses to this order,, system will look for a real cost object which can be in general scenario Cost center.

    So this way you can post the actual expense to the cost center besides getting it posted on to Statistical internal order also which helps your client to hav a track on.

    Thanks Regards,

    Ravi Kumar

  • RELEVANCY SCORE 2.65

    DB:2.65:Re: Moving Load On Inclined Slab sk



    slab has a smooth grade .

    If vehicle with concentraded loads run in the perfect longitudinal direction , load components are perfectly created.

    If this same vehicle run in an inclined route in relation to the longitudinal direction(as shown in the picture) , load components of this part of the route are not created or at least they´re not applied to the slab.

    If vehicle is created with planar loads , load components are perfectly created in every route segments. Is there a way to make a concentrated loads vehicle work on this route/structure geometry combination??







    Solved!
    Go to Solution.

  • RELEVANCY SCORE 2.65

    DB:2.65:Re: Vehicle Turning Radius Templates/Info 8' X 20' 9f


    Can anyone direct me to any websites that might have downloadable blocks or
    info on turning radius/paths for different types of vehicles? Specifically,
    I am interested in semi-tractor/trailer info.

    DB:2.65:Re: Vehicle Turning Radius Templates/Info 8' X 20' 9f

    Do a web search for a product called AutoTurn. They have templates for
    vehicle turning radius' for sell. Most Civil Engineering firms that do
    traffic analysis will have AutoTurn and they might give you the radius.

    Also, if you have Architectural Graphics Standards book (Chapter One,
    General Planning and Design), you can draw your own.

    You can also perform a Google search for other ideas.

    --
    Dean Saadallah
    http://LTisACAD.blogspot.com
    --

  • RELEVANCY SCORE 2.65

    DB:2.65:Need Immediate Help Regarding Project About Vehicle Tracking Using Labview sm



    hello everyone

    i am doing a project on vehicle tracking using lab view

    i have completed the following steps

    1)color to grayscale conversion

    2)thresholding

    3)morphological operations

    my problem is that how do i get a bounding box around the vehicle and track the vehicle, also may be get the coordinates and speed ?

    also how to stop the bounding box from one frame to appear in the next?

    please help soon.

    an immediste reply would be of great help to me.

    thank you

    DB:2.65:Need Immediate Help Regarding Project About Vehicle Tracking Using Labview sm


    Aviva as in Aviva Insurance Company? What does that have to do with image detection? Do they provide satellite images or something?

    I can't open your Version 11 project but I also don't see how the sequence of vision functions in you diagram is appropriate for tracking vehicles. If I had a video of traffic and I wanted to track individual vehicles the first thing I would try to track would be their color and you convert to greyscale right away. Can you show us some sample images and explain what you're trying to do a little better? I don't think we're getting your problem yet.

    I hope you don't need to complete this project in a couple days (unless you're a LabVIEW and Image Processing genius it's going to take some time and effort... )

    BTW,do you have the NI Vision Development System Module???

    EDIT: One more thing: If you "Save for Previous Version" and create a LabVIEW 10 project to post more people (like me) will be able to see your code and perhaps help out...




    Using LabVIEW: 7.1.1, 8.5.1 2013

  • RELEVANCY SCORE 2.65

    DB:2.65:My Bluethooth Wont Conncet Th My Vehicle xj


    it conncet last night on my way to work. On the way home i couldn't get it to connect i tried deleting from vehicle and tried re pairing it and it keeped giving me an error. I'm trying to pair with 2013 Dodge Journey it uses Uconnect.thanks

    DB:2.65:My Bluethooth Wont Conncet Th My Vehicle xj

    I will try that thanks I'm restoring my phone right know because it was giving my an error that it wouldn't back up through iTunes on my iMac.

  • RELEVANCY SCORE 2.64

    DB:2.64:Re: An Object Casted Into Its Child? zz


    Hi,

    of course you can cast your class as

    if( vehicle.getType() == BUS )
    {
    Bus bus = (Bus) vehicle;
    }

    or

    if (vehicle instanceof Bus)
    {
    Bus bus = (Bus) vehicle;
    }

    regards

    DB:2.64:Re: An Object Casted Into Its Child? zz

    hello,
    m trying to do the same thing...
    I want to typecast an object of type "Object" to
    t" to a class object.
    its like:
    Object obj = (again)obj;You never have to cast when assigning to a variable of type Object, since every class extends Object.

    ........
    class again{}

    However,this doesnt work..it throws an Class Cast
    Exception...wts d way out?
    Thanks..You'll get a class cast exception when you try to cast an incompatible reference. You can't change the object's type with a cast. If the object isn't of type "again" (or one of its subclasses), you won't be able to cast its reference to "again".

  • RELEVANCY SCORE 2.64

    DB:2.64:Start Date End Date Duration In A Pivotchart mm


    I have a spreadsheet that is tracking a vehicle model, Vehicle ID, start date for usage, end date for usage and total number of days used. I want to create a pivotchart that plots the total number of vehicles used for each day. For each day a vehicle is
    being used, I want to be able to plot it. For example, if vehicle A is used 1/1 through 1/5 and vehicle B is used 1/3 through 1/6, I want to see vehicle AB on 1/3 and 1/4 -- stacked so I can see the number of vehicles used that specific date.On the vertical
    axis I want to see the vehicle model and VIN, on the horizontal axis I want to see each date even if a vehicle is not used on a specific date, so I can track no usage. Is this possible? I have tried everything I can think of today.

    DB:2.64:Start Date End Date Duration In A Pivotchart mm

    Excel 2010 Tables, PivotTables, Gantt Chart
    Just replace NName with Model and VIN.
    http://c3017412.r12.cf0.rackcdn.com/10_18_11.xlsm
    Alternate:
    http://c3412576.r76.cf0.rackcdn.com/04_25_12a.xlsm
    If you get *.zip, don't unzip, just rename *.xlsm