• RELEVANCY SCORE 4.12

    DB:4.12:Huge Sound Problem During A Subway Scene... Can Anything Be Done? cf





    i think not, but maybe someone more experienced than me can tell me for sure. there's basically a series of scenes that take place on a subway. the sound is obviously choppy. we did ADR, and it didn't help much so now we're trying to put together the clips with the original sound recorded on location. obviously very little can be heard from the characters, and the subway noise is extremely annoying. what can i do to make it better???

    DB:4.12:Huge Sound Problem During A Subway Scene... Can Anything Be Done? cf

    igory87 wrote:
    i think not, but maybe someone more experienced than me can tell me for sure. there's basically a series of scenes that take place on a subway. the sound is obviously choppy. we did ADR, and it didn't help much

    Hmm, with ADR you have the actors in a sound booth. They watch the video on a screen and listen to the original audio on headphones. They then repeat their lines in the nice, quiet soundbooth.

    You then go back to the video, throw away the audio, put in the new dialog. You then add foley to simulate the sounds you expect to hear (at a much lower level).

  • RELEVANCY SCORE 2.75

    DB:2.75:Subway Surfer Problem jm






    Double tap doesnt work for using hoverboard in subway surfer...

    DB:2.75:Subway Surfer Problem jm


    i tried reinstalling... didnt work...the level was reset to zero also....after so much playing... its so much annoying....

  • RELEVANCY SCORE 2.74

    DB:2.74:Scene Builder Can't Show Working Pane. pa





    Hi,I am opening the JavaFX Scene builder 1.1 on Mac for the first time.Everything i huge I can't see the whole working pane, only upper left corner is shown (I couldn't attach a picture to this discussion).And there is no scrollbars so I can't scroll around to see all my working pane.Do any one have any idea why (I tried with JavaFX Scene builder 2.0 but got the same problem)/ Peter

    DB:2.74:Scene Builder Can't Show Working Pane. pa

    Hi,I am opening the JavaFX Scene builder 1.1 on Mac for the first time.Everything i huge I can't see the whole working pane, only upper left corner is shown (I couldn't attach a picture to this discussion).And there is no scrollbars so I can't scroll around to see all my working pane.Do any one have any idea why (I tried with JavaFX Scene builder 2.0 but got the same problem)/ Peter

  • RELEVANCY SCORE 2.67

    DB:2.67:Losing Data Connection When Going Under Subway kx



    Hello,

    I recently got the Blackberry Tour under Sprint and one problem I've been having is permantly losing the data connection when going under the subway in NY. When I reach the street level, I have to manually disable the "Mobile Network" and re-enable it. I'm on the latest version of software (4.7.1.40). Just to make it clear, I know it won't work while I'm in the subway, it is when I return to the ground level.

    Anybody else have this problem?

    DB:2.67:Losing Data Connection When Going Under Subway kx


    Hello,

    I recently got the Blackberry Tour under Sprint and one problem I've been having is permantly losing the data connection when going under the subway in NY. When I reach the street level, I have to manually disable the "Mobile Network" and re-enable it. I'm on the latest version of software (4.7.1.40). Just to make it clear, I know it won't work while I'm in the subway, it is when I return to the ground level.

    Anybody else have this problem?

  • RELEVANCY SCORE 2.61

    DB:2.61:Play Sound At Scene Change Time dz



    Try testing what exactly happens with an Debug.Log after playing the sound. If it works, try delaying the scene switch for several frames using a Couritine, the scene probably switches to fast for the sound to play.

    DB:2.61:Play Sound At Scene Change Time dz


    Try testing what exactly happens with an Debug.Log after playing the sound. If it works, try delaying the scene switch for several frames using a Couritine, the scene probably switches to fast for the sound to play.

  • RELEVANCY SCORE 2.50

    DB:2.50:Distorted/Cracked Sound During Installation 7z



    For some reason, whenever i install program that has sound during installation, the sound become distorted/cracked. This problem only occurs during installation; every other programs don't have this kind of problems...anyone know why?
    P.S my sound card is Audigy 2 ZE with newest updates

    DB:2.50:Distorted/Cracked Sound During Installation 7z


    For some reason, whenever i install program that has sound during installation, the sound become distorted/cracked. This problem only occurs during installation; every other programs don't have this kind of problems...anyone know why?
    P.S my sound card is Audigy 2 ZE with newest updates

  • RELEVANCY SCORE 2.49

    DB:2.49:Boundingspheres j7


    When I back the view away from an object in my scene, I can't get too far away before sections start to disappear and then the object is no longer visible. In other words, I can only see objects that are a short distance away in world coordinates. I want to see distant objects as well. I figured it was a problem with some kind of view boundaries.

    My light influencingBounds is huge. This should make my light affect all objects in my scene, right?
    My viewPlatform activationRadius is huge. This may not have a thing to do with my problem.

    Any other ideas?

    Thanks

    DB:2.49:Boundingspheres j7

    Nevermind.

    view.setBackClipDistance() is what I needed.

    Sets the distance at which objects are cut off from rendering.

  • RELEVANCY SCORE 2.46

    DB:2.46:Problem With Mental Ray With Sun And Sky And Reflective Materials ax



    Hi

    I have made an outdoor scene in Maya 2011 consisting of a few buildings and some fields with surrounding trees to hide horizon line. I have used mental ray to light the scene so there is a physical sun and the sky looks realistic too. Also realistic shadows are cast over the scene making a very simple model (so it loads fast) look quite realistic.

    I export the scene and then convert to a w3d file using 3DS Max Design 2011 for use in Director but the sky and lighting does not appear.

    I have read elsewhere that the best option is to texture the model to include the shadows and such. However, I will be using animation on top of my scene and need shadows to be there, and moving with the animations.

    There is also some glass and water in the scene which reflects the scene in Maya but does not work in Director. And as the user will have control of the camera the reflection needs to show the animations as well as the scene.

    The mental ray effect and the use of reflections is of huge importance to my project and so any help or advice is much appreciated.

    Many Thanks

    Patrick

    DB:2.46:Problem With Mental Ray With Sun And Sky And Reflective Materials ax


    Baking your textures is the only way I can think of here (plus a few tricks), just remember to bake without the shadows that's going to change in your animation. Those shadows you'll have to simulate with a baked shadows on planes, alternatively a flattned version of the shadowcasting object ( http://www.inludo.com/developments/tuts/shadows01.htm ).

    As for the sky, use a skybox (http://www.inludo.com/developments/tuts/skybox01.htm)

    As for reflections this can also be faked with geometry by using duplicate models under the reflective surface, you can also use another 3d sprite with dts turned of and grab the image of a camera (pointed towards your current camera) and applying that image to the appropriate surfaces (http://necromanthus.com/Games/ShockWave/tutorials/Mirror.html). A method I haven't tested but I belive will also work and might give a better performance is to have two cameras rendering to the same sprite. You can get a start at it here http://homepage.mac.com/nephilim/sw3ddev/multiple_cameras.html.

    You might also want to look at http://www.robotduck.com/content/articles/director/3d/alphaReflections/index.htm if you don't need to detailed reflections which could be usefull for surfaces far from the camera for example.

  • RELEVANCY SCORE 2.46

    DB:2.46:Sound Problem During Phone Call, Please Help 8x


    anyone have problem with the sound during phone call? it sound like my voice is having an echo...

    DB:2.46:Sound Problem During Phone Call, Please Help 8x

    anyone have problem with the sound during phone call? it sound like my voice is having an echo...

  • RELEVANCY SCORE 2.41

    DB:2.41:How To Organise Huge 3d Scenes zj


    Hy there,we are working on a huge car scene, with lots of technic like engine, chassis and stuff like that. The scene is separated in many different scenes. All these different scenes are about 500MB in MAX with at least 2-5mio polygons.What I would like to know: Did anybody invent a workflow handling such a huge amount of polygons? Sure, XRef is a solution, but it´s not as handy, as I expected.Just generally speaking, but I am interested in organising this monster. Right now, opening the engine scene takes about 10minutes. Amazingly VRay can render this without a problem...Help would be nice...D.



    www.lightshape.net

    DB:2.41:How To Organise Huge 3d Scenes zj

    Let us know what works out best for you, I would love to know.I also work with very large car models (9-13 million polygons) I have a very powerful computer graphics card so I don't have a lot of problems, but I do rely on Max's layers to organize my car parts for easier workflow. I seperate mostly by what type of shader the objects will get. I use layers for my car paint, chrome, glass, rubber, etc. But I also seperate my tires, rims and brakes into seperate layers. This way I can hide many objects and just concentrate on a couple at a time. Not sure how this effects things if you're animating though....

  • RELEVANCY SCORE 2.41

    DB:2.41:Lighting My Subway 91


    i have been working on this a month i'm not sure of a way to light it i was going to use the photomtic light with the web and the free point like set it to web and then use the webfile add the linar cover. but it does not work in this scene i have the exposure control on when i render the scene, the acene turms black i have about 4 of the same lights but no effect.2 images attachedwith the light.without the lights




    Computer engineer, 3ds max freelancer 3ds max used currantly using max 9 (7, 8)poser using 8 (5,6,7)windows xp sp2512 memory 40 and 80 gb hard drivessis mirage 3 VGA CardAsus motherboard

    DB:2.41:Lighting My Subway 91

    Too many problems to list. Could be-- Scene not set to correct scale-- light intensity too low-- render setiings too low--- etc.



    Windows 64 Ultimate, Max 9 to current, Quad Q6600, 8gig RAM, 1gig 4870 HD

  • RELEVANCY SCORE 2.40

    DB:2.40:Sound Of Mc On Scene 1 Play When Moving Between Scene 2 And Scene 3 zm


    the fla project have 3 scenes

    scene 1 has a mc with sound ( a character talking )

    so i create a button on scene 3 to go back to scene 2
    when testing

    its back to scene 2 but with the sound of the mc on scene 1 ?

    how ? why ?

    DB:2.40:Sound Of Mc On Scene 1 Play When Moving Between Scene 2 And Scene 3 zm


    correct, it's not happening to me.

    in fact, the sound stops as soon as you go to scene 3 (or scene 2).

    update your flash player: http://get2.adobe.com/flashplayer/

    (untick any unwanted-ware.)

  • RELEVANCY SCORE 2.40

    DB:2.40:I Can Not Hear The Sound From Microphone During The Chat mm


    microphone sound hearing problem during chat

    DB:2.40:I Can Not Hear The Sound From Microphone During The Chat mm

    Hi,

    Does the sound work fine apart from chat?

    Please check on a different computer and see if it works or not.

    Step 1:

    I would suggest you to run the recording troubleshooter and check if it helps.

    http://windows.microsoft.com/en-US/windows7/Open-the-Recording-Audio-troubleshooter

    Step 2:

    Try running the troubleshooter for the sound and check:

    http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter

    Step 3:

    Check if Microphone is enabled or not.

    a.Click on start.
    b.Click on Control panel.
    c.Switch to classic view.
    d.Click on Sound.
    e.Then click on Recording tab.
    f.Right click in the empty space under select recording device.
    g.Show disabled devices.
    h.If microphone is disabled enable it.

  • RELEVANCY SCORE 2.39

    DB:2.39:Sound Problems, Sometimes I Can Get The Sound To Work Then I Close Down The Computer And Next Time It Is Gone Again 77


    I have windows 7 64 bit on my asus laptop.All the updates have been installed including service pack 1.
    I am having a huge problem with sound.

    DB:2.39:Sound Problems, Sometimes I Can Get The Sound To Work Then I Close Down The Computer And Next Time It Is Gone Again 77

    What do you do when you get the sound to work?
    Did this just start recently or has it been happening for a long time?

    If it's a recent problem, you can try a system restore to when it was working.
    http://windows.microsoft.com/en-US/windows7/products/features/system-restore

  • RELEVANCY SCORE 2.39

    DB:2.39:Not Apple Standards - Pear Standards 7s


    I have finished increasing my multiplier to 30x in Subway Surfers on my iPhone. I have just recently bought an iPad, using the same iTunes, AppStore, and Game Center credentials. When I downloaded Subway Surfers on my iPad, I had to start from scratch. Even though the high score was visible on the starting page. The app is universal (available on iPhone and iPad). I would really appreciate it if the Game Center "experts", could possibly fix this problem - on all games and not just Subway Surfers. Thank You Game Center (if you guy even read this)

    DB:2.39:Not Apple Standards - Pear Standards 7s

    You're welcome. Just contact them. It will take a moment of your time.

  • RELEVANCY SCORE 2.39

    DB:2.39:Scene Crash 9f


    I have a huge problem - scene on wich i worked 2 months just crushed - when i try to open it it appears - "Errors have occured while reading this scene that may result in data loss.Please check the ScriptEditor for details" . In the script editor : settAttr defaultRenderLayer1.precompTemplate -type "string" ""; Can i recover this problem. The scene is huge . I have another copy of it but without the uv-layouts and big part of the shaders and textures which took me 2 months to make them .Also in the output window i get this:mental ray for Maya 2011 Maya binary file parse error: : (5) bad blockMaya binary file parse error: : (5) bad blockMaya binary file parse error: : (5) bad blockMaya binary file parse error: : (5) bad block

    DB:2.39:Scene Crash 9f

    If that doesn't work, try creating a brand new file and importing the file that crashes.Don't ask me why, but it worked when I ran into something similar.

  • RELEVANCY SCORE 2.38

    DB:2.38:I Tunes Rental Sound/Vision Problem jk


    I downloaded a movie in HD but there is a huge lipsync delay and the sound is distorted when I play it on my computer

    DB:2.38:I Tunes Rental Sound/Vision Problem jk

    I downloaded a movie in HD but there is a huge lipsync delay and the sound is distorted when I play it on my computer

  • RELEVANCY SCORE 2.38

    DB:2.38:Audio Dropping Out On Export To Quicktime j3


    Ive been exporting my film from FCP 4.5 so that I can make a DVD screening copy, however, when I export the film not all of the audio tracks export. During several scenes on the exported quicktime file the audio drops out.

    The way Ive been editing has been to make new sequences for each scene and then splice those sequences into a master sequence Ive labeled rough cut. I went back through the audio tracks in the individual sequences and the clips that dont have any problems have been imported with the same settings and dont appear to be different than those that are dropping out. Ive exported the file several times and the drop-outs occur randomly in several places but there is always one scene (the longest scene) in which this problem occurs every time. Ive checked those tracks and they appear to be the same as the clips that are fine.

    We shot on a DVX-100A and recorded the sound directly into the camera so there are no syncing issues. When you playback the entire sequence in FCP there are no problems.

    Because the project is 75 minutes long, and the exported file comes in at 12 GB, I think that my computer is just sputtering when it exports (its an older computer) and this is causing the problem.

    If anyone has any ideas Id appreciate it.

    This occurs both in Export - Quicktime, as well as Export - Quicktime Conversion.

    DB:2.38:Audio Dropping Out On Export To Quicktime j3

    The audio that is dropping is coming from tracks 1 and 2. The audio drops out mid-scene. I've exported several versions tonight and each time the audio drops out at different locations, but on each track. The audio output assignments are set to tracks 1 2.

  • RELEVANCY SCORE 2.37

    DB:2.37: Satellite L750 - Suttering Lagging Buzzing Sound During Media Playback xk


    Ok, I bought this Satellite L750/L755 Refurbished and ive had it for nearly 2 months now.

    Ive been putting up with this problem so far because everything i tried originally had no effect.

    So now im coming straight to the toshiba forums in hope of a solution.

    Ok so like the subject line says, there is a problem during media playback. Any media. YouTube streaming, DVDs, games etc. It is hard to describe what happens more than a Stuttering/ Buzzing sound, which seems to lag for about a second and then be fine again.

    However this can happen anywhere up to 10 times during a single song on YouTube. But it is not localized to sound. As the sound lags, so does the video but not to the same extent.

    The video just usually stops and then cuts back in after. The sound seems to just get stuck for the second, buzzing the last sound it was playing.

    Another thing i noticed was that this buzzing was accompanied every time by a huge spike in my CPU usage. sometimes to 100%. but the task mannager shows nothing using the CPU at these moments.

    So now to the solution and what i have tried

    While i was shopping around i noticed that -Dell- owners seemed to be having a similar problem that was being caused by a faulty driver in the Intel Rapid storage system files, but i didnt have that installed so it couldnt have been that.

    I noticed that Toshiba had released new drivers to solve a problem similar to this caused by the Atheros WLAN adapter, which my laptop has. I did download and try this driver, but as the problem occours offline as well as online i thought this might be a longshot. of course i was right.

    If anyone can help i would really appritiate it.

    Many thanks.

    DB:2.37: Satellite L750 - Suttering Lagging Buzzing Sound During Media Playback xk

    Hello!

    I Acctually have the exact same problem. Gigantic cpu spikes witch makes all streaming media stutter, lag.

    I've checked out some of the other threads about this in different forums and all of them points at dpc lag..

    In my case the DPC latency is caused by either Ndis.sys or tcpip.sys.. A network issue.. or wlan mayby i should say. What bugs me the most is tha i bought this computer (L775d-10R) brand new two days ago!

    I've updated every driver there is to update, including the new update from toshiba for the Atheros wlan adapter. None of it works.

    I've just contacted my retailer to see what they say about where and to whom i should turn to adress this issue.

    Is i t possible to update the ndis.sys somehow? Does it help? It feels like there is a internal conflict that dosent show somehow...

    It's funny though, i only bought that stupid machine to make my wife get her hands of my gaming pc..

    Now im struggeling with her laptop and shes on my system...

    Instant karma...

  • RELEVANCY SCORE 2.37

    DB:2.37:Xperia Neo V Got Lots Of Error 8f



    after updating to latest ics ver .587 i cannot set any notification and ringtones which i downloaded.when i restart phone the downloaded ringtones and notification comes up but when i select it not playing any sound and when set any downloaded tone when a call or notification recive it stays silent.cleaned all cache and clear data.try to set via music library and message options still i cant change factory reset and repair phone still problem existed please help...................

    play store is no more useful downloaded games like temple run 2,subway surfers after downloading it is showing package file is invalid it makes my phone worst 9/10 apps wont install cleared cache remove updates reinstall factory reset repair still problem occures.please help me to fix quickly

    DB:2.37:Xperia Neo V Got Lots Of Error 8f


    Have you tried all the ways that Sony suggested to re-install the updates? Like using the Update Service?

  • RELEVANCY SCORE 2.37

    DB:2.37:Problem In My Iphone 4s zj


    Camera mode auto shuts off when choosing pano or square mode and I think the phone's getting hot. Subway surfer started to hang...removed the application.

    DB:2.37:Problem In My Iphone 4s zj

    I tried it before I saw your post and it did work. Nevertheless, thank you for helping.Have noticed a new problem though. Today I switched the mobile internet service for 5 minutes or so and the phone got so warm that I could barely keep the phone close to my ears to make a call. I did complete the call though. I think the phone was a bit warmer on the side of the phone where the SIM card slot is provided.Is this normal?

  • RELEVANCY SCORE 2.37

    DB:2.37:I Am Facing Graphics Problem While Playing Games Like Temple Run 2, Subway Surfers, Etc On Iphone 5 aa


    I am facing graphics problem while playing games like Temple Run 2, Subway Surfers, etc on iPhone 5.
    Kindly help me.

    DB:2.37:I Am Facing Graphics Problem While Playing Games Like Temple Run 2, Subway Surfers, Etc On Iphone 5 aa

    I am facing graphics problem while playing games like Temple Run 2, Subway Surfers, etc on iPhone 5.
    Kindly help me.

  • RELEVANCY SCORE 2.37

    DB:2.37:Weird Alarm Sound Is Randomly Being Sent To My Contacts During Audio/Video Calls. 7a



    Greetings,

    I don't know how long exactly but for some time my friends whom I talk to through Skype have been saying they can randomly hear a very loud alert-like sound once in a while coming from my end. My friends aren't that computer savvy so I assumed it was a problem on their end (their PC's overheating or whatnot) but last week I was speaking with a friend and he had a huge echo problem so I was hearing myself as well and finally heard the sound for the first time because of the echo, the only thing I can compare it to is the overheat warning some computers make when their components get too hot. If you can help me find a possible solution I will be most grateful since this irritates my friends when we speak.

    Some details:

    + I don't hear this sound at all only the people I'm voice chatting with can hear it unless there is an echo. It's being sent directly to them.

    + I haven't heard this sound or anything like it from my laptop during the 2 years I have owned it.

    + My computer is an Asus N53SN Laptop.

    + I use a Logitech headset and don't use the built in speakers at all.

    + My sound card drivers and others are fully up to date as far as I know.

    + Have the latest version of Skype.

    + Will share anything else if needed, thanks

    DB:2.37:Weird Alarm Sound Is Randomly Being Sent To My Contacts During Audio/Video Calls. 7a

    I have the same laptop and have no issue at all, and I use an assortment of audio/video hardwaredo you hear this same sound played back when you test using echo123?have you enabled any programs to interface with Skype? (Tools|Options|Advanced -- Manage other programs' access to Skype)



    Regards,Neil

  • RELEVANCY SCORE 2.36

    DB:2.36:Huge Problems After Jb Update az



    the camera isuue is fixed but that's not enough.the loudspeaker is not that clear,infact the sound burnsts now.its ok with headphones.games lag a lot.even low end games like temple run and subway surfers lag a lot ITS SO FRUSTRATING!!.tapping on the call icon to call someone takes abt 5-6 seconds to open!go launcher ex works in slow motion.live wallpapers amkes the phone slow,if i swipe the home screens with live wallpaper on it lags!!!plaesse someone with same isuues help me!also the phone heats up too quick. it doesn't matter that i am playing subway surfers or etrnity warriors 2(which is now not compatible with the device)it heats up too quick.

    DB:2.36:Huge Problems After Jb Update az


    there are other threads on the same topic, use the search bar (top right corner) and post there, thank you.





    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • RELEVANCY SCORE 2.36

    DB:2.36:Also Missing Sound... xd


    Hello folks, I have a similar problem to the prev. post but a little different. I just made a home movie in iMovie and burned it in both iDvd and Toast. Both times the sound from the camera drops out after the first scene. All sound during transitions (from iTunes) and the first scene is intact. I tried the delete encoded assets trick and tried saving it to desktop and burning with Toast, didn't work. It plays just fine in iDVD preview. Any hints? Thanks, R

    DB:2.36:Also Missing Sound... xd

    I exported the movie into Quicktime and burned it from there. Seems to have worked, Hoo-ray. Too bad the programs don't simply work like they have in the past and should continue too.

  • RELEVANCY SCORE 2.36

    DB:2.36:Re: Problem With Zoom Out px


    Hi all. When I want to zoom out in my scene, I can do it up to some limit, after that it does not work. The scene is in mm and I have a huge building model there. How to change zoom out limit. Thank you.

    DB:2.36:Re: Problem With Zoom Out px

    Dad anyone ever get a fix for this problem, I am having the same issue and my scene is on mm as well. These people don't realize that when your working with Engineered Models you have to maintain the proper scale for future work that need to match.



    D.R.3ds Max 2013/2014Autodesk Inventor AutoCADHP xw8600 WorkstationWindows 7 64BitDual Intel Xeon 2.83 E5440 GHz8.00 GB of Ram

  • RELEVANCY SCORE 2.35

    DB:2.35:Call Answer N Album Problem Cant Solve, Plz Help. sx



    i am using Xperia P and few days back updated it with this latest version. All went good but suddenly after few days it got hanging during receiving and dialing the call, album thumbnails disappear and sometimes shows msg like app not responding or gets blank.

    i have formatted many times but it again come back after few days of use. Plz help me what i should do,

    i use app like atrium, maple, currency, file expert, pages mgr, my prayer, skype, clean master, twitter, temple run,racing moto, instagram, app lock, eset, outlook, kingsoft office, subway, mx player, picsart, iquran lite, flashlite, yahoo msgr.

    DB:2.35:Call Answer N Album Problem Cant Solve, Plz Help. sx


    for your album

    try download this

    http://www.apkmania.co/2011/10/gallery-pro-v11.html

    another way to see ur photo

    i also have a problem with the call

    it seem a bit delay when im calling people or answering call

    any suggest?

  • RELEVANCY SCORE 2.35

    DB:2.35:Sound Problem 1x



    i am using hp pavilon dv6,my sound from the headphones sound like i m hearing it in a huge hall,and not properly like how an headphones usually sound,i chnged the headphones but ol have the same problem as i connect it to its jack.please help here

    DB:2.35:Sound Problem 1x


    i am using hp pavilon dv6,my sound from the headphones sound like i m hearing it in a huge hall,and not properly like how an headphones usually sound,i chnged the headphones but ol have the same problem as i connect it to its jack.please help here

  • RELEVANCY SCORE 2.35

    DB:2.35:Help! 9a



    I have a; huge problem my sound doesnt even work on my phone what should i do

    DB:2.35:Help! 9a


    While the phone is on, pull the battery for 30 seconds. If that doesn't cure your problem I would suggest you take the phone back to ATT.

    Bill J

  • RELEVANCY SCORE 2.35

    DB:2.35:More Than One Sound Effect 7s


    I tried looking elsewhere for an answer (as well as experimenting) but I'm stumped.

    My middle school kids are adding sound effects to a dramatic scene... something I have them do every year... but some of them want to add 2 sounds to the same portion of the scene. Like a dramatic beat from the "textures" category and during the time "glass breaking".

    In imovie 6, there were two audio tracks.

    I realize there's no timeline anymore, so is there a way to have sound effects play at once?

    (I even looked into exporting the project back to imovie 6, but a 1 minute scene took 7 minutes to export, followed by 2 minutes to import into the old imovie.)

    Thanks

    DB:2.35:More Than One Sound Effect 7s

    See this video tutorial from Apple:

    This one talks about Sound Effects
    http://www.apple.com/ilife/tutorials/#imovie-making-25

    This one shows how to do multiple sound effects and music tracks at the same time.
    http://www.apple.com/ilife/tutorials/#imovie-sharing-33

  • RELEVANCY SCORE 2.34

    DB:2.34:Lumia 820 Sound Stuttering In Games After Lumia Bl... 89



    Hello, I've updated my phone to Lumia Black and I've noticed that in some 3D games the sound stutter randomly, it's most noticeable on Subway Surfers but it also happen slightly on Asphalt 8 and Final Fantasy III. Is there any one else with this problem? Is there any fix for it?

    DB:2.34:Lumia 820 Sound Stuttering In Games After Lumia Bl... 89


    I can't believe that it's normal since it was ok before the update, please someone can help me? It's really annoying me...

  • RELEVANCY SCORE 2.34

    DB:2.34:Xperia Sl Over Heating Issue : m3



    Hi all,

    I recently bought a Xperia SL white in India, but i m facing over heating issue with this phn:

    Temp during charging is 31-32 degree (normal)

    but temp goes to 47 degree while playing subway surfer, temple run for 15-20 mins.

    also temp goes to 40 degree during surfing using mobile GPRS data (2G).

    i bought this one specially for playing games , but now it seems like impossible with this phone.

    i go to local service center in Jalandhar, Punjab (India), they said this is normal. but it doesnt seems normal to be bcoz phone gets so hot that unable to hear any call after playing games.

    Is this normal issue with all Xperia SL's ?

    Does Jelly Bean update help in override this problem ??

    DB:2.34:Xperia Sl Over Heating Issue : m3


    @Desirockerz that's the yellow tint issue, take it to a Sony repair center, Sony will replace the LCD





    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • RELEVANCY SCORE 2.34

    DB:2.34:N82 - Restarts In Subway/Pedestrian Subway While M... ac


    AFAIK, this is known problem, at least here in Moscow it was reported continuously by N82 owners. After you turn on Music Player and go underground, in a several minutes (up to 15 minutes sometimes) N82 goes in restart. The same happens with Radio while travelling across the street via pedestrian subway - it usually takes dozen of seconds to get that UNPLEASANT result. I assume this can be caused by GSM transmitter lack of signal - but who could expect this can be somehow connected to listening the music?

    I've heard of a dozen unhappy owners with the problem, and shouldn't Nokia staff pay attention to us?

    DB:2.34:N82 - Restarts In Subway/Pedestrian Subway While M... ac

    Have checked it up. Phone restarts with no Music Player working as well - have launched only Step Counter, after going up it was saying that application has crashed, and it was not in Task bar.

    Nokia Care had replied with advise to 'turn Cell Broadcast off - this is causing a problem' (actually, I did never turn it on at all) - checked this up, CB is dead off mode.

    Needless to say that the problem is continues.

    I'm not talking of *free* 2 Gb Nokia MicroSD card from the package that went to daisies after a few days.

  • RELEVANCY SCORE 2.34

    DB:2.34:No Sound During Phone Calls? kx



    I was wondering if anyone else is having this problem. I didn't see any other post relevant to it either.

    Basically when I try to answer a call, or make a call I get no sound. At first I thought it was my friend and maybe they were accidentally muting their phone when they called. This however, is not the case. Turning my phone off and back on usually fixes the problem. But it seems to occur rather randomly and I never had this issue before my phone updated.

    It isn't a huge problem, but there are other things going on with my phone since the recent update.

    I admit I am curious why the phone does this and if anyone else is having this problem.

    Droid 2 Global

    DB:2.34:No Sound During Phone Calls? kx


    I was wondering if anyone else is having this problem. I didn't see any other post relevant to it either.

    Basically when I try to answer a call, or make a call I get no sound. At first I thought it was my friend and maybe they were accidentally muting their phone when they called. This however, is not the case. Turning my phone off and back on usually fixes the problem. But it seems to occur rather randomly and I never had this issue before my phone updated.

    It isn't a huge problem, but there are other things going on with my phone since the recent update.

    I admit I am curious why the phone does this and if anyone else is having this problem.

    Droid 2 Global

  • RELEVANCY SCORE 2.34

    DB:2.34:Another Huge File Size Problem pc


    Hi,I've imported a .fbx model (which was exported from Cinema 4D) into Max2012.Fbx-file and c4d-file were approx. 250MB, the Max file is 990MB. Polygon Count is 4.8Million, Allocated RAM is 2.5GB. No Materials, no animation, no note tracks, no motion mixer data.Similar files with the same polgon count do not exceed approx. 400MB. So the problem is not excessive RAM usage or scene handling but autoback/Save takes ages and my project folder will grow to hundrets of gigabytes during the project.Just checked "Compress on save" which reduces file site to 280MB. But saving the scene takes even longer so this is not an option.Any ideas how to reduce file size are highly appreciated.Thanksg_lab

    DB:2.34:Another Huge File Size Problem pc

    Hi,I've imported a .fbx model (which was exported from Cinema 4D) into Max2012.Fbx-file and c4d-file were approx. 250MB, the Max file is 990MB. Polygon Count is 4.8Million, Allocated RAM is 2.5GB. No Materials, no animation, no note tracks, no motion mixer data.Similar files with the same polgon count do not exceed approx. 400MB. So the problem is not excessive RAM usage or scene handling but autoback/Save takes ages and my project folder will grow to hundrets of gigabytes during the project.Just checked "Compress on save" which reduces file site to 280MB. But saving the scene takes even longer so this is not an option.Any ideas how to reduce file size are highly appreciated.Thanksg_lab

  • RELEVANCY SCORE 2.33

    DB:2.33:Capture Question m9


    I was able to capture the video into FCE but I wasn't able to hear the sound coming out from the computer during capture. I only see the video on the screen. I didn't have this problem working with Elements on PC. Is that normal? If not, pls tell me where to look in the setup to turn on the sound because I couldn't find it.

    Second, after capturing it always says that my sound is at different bit and therefore the video and audio could be out of sync. I recorded at 12 bps. Is that the problem? Am I supposed to record my video at 16bps? I reviewed the video file output and everything seems to be alright.

    Third, the sound status shows MONO on all my scenes with the exception of 1 scene. Do you know why? It's exactly the same camera during the same shooting.

    Thanks for the help.

    DB:2.33:Capture Question m9

    1 and 3 don't function in FCE.

    http://www.fcpbook.com/Audio3.html

    FCE always captures as separate mono tracks. You can convert them to stereo pairs in the timeline.

  • RELEVANCY SCORE 2.33

    DB:2.33:Botones Flash En Mc fc


    HI!!!! I've a huge problem and I tryied almost everything to
    deal with it and I couldn't make it work...
    Here is the problem: I'm using 1 scene... In that scene I've
    a preloader (that work perfectly) in the first frame. In the second
    frame I've a movie clip with some buttons in it (that also works
    perfectly), the problem is in the third frame where I've a similar
    movie clip but the buttons DON'T WORK and I'm loosing my mind
    trying to figured out why????

    Thanks in advance

    DB:2.33:Botones Flash En Mc fc

    SEBA_BRIOSO wrote:
    Hi!!! I'm sorry it's just English isn't my first
    language... I'll try to be
    more specific this time...

    *I'm using one scene
    -LAYER 1_In the first frame on the first layer I've a
    preloader working fine
    -LAYER 2_The first frame on the second layer is empty.
    However the second
    frame on the second layer conteins a movie clip. This MC
    has a lot of photos
    and two buttons to show them trough... This MC also
    works fine.
    -LAYER 3_In the second frame of the third layer I've a
    button that takes me to
    the frame number 3. (Until now I didn't have anything in
    the third frame on the
    main timeline)
    -LAYER 4_The first two frames of this layer are blank...
    In the third frame
    I've put a similar MC with different photos and the same
    two buttons to show
    them trough... HERE IS MY PROBLEM!!! The buttons don't
    show the other photos
    and the animations don?t work

    :)

    To help you figure it out we need to see the file.
    You could miss a DOT in the button action script, you could
    overlook something obvious
    that we can't possibly guess from here. Post like this end up
    having few days follow
    up on guessing and trying stuff. I would rather not do that.
    Please upload the file, someone from here or myself will look
    into it and tell you right
    away what you have done wrong. Otherwise we won't be able to
    help you.

    --
    Best Regards

    Urami

    --
    "Never play Leap-Frog with a Unicorn."

    urami
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    /urami

  • RELEVANCY SCORE 2.33

    DB:2.33:Scene Name za



    During the game: Application.loadedLevel or Application.loadedLevelName.


    Editor: EditorApplication.currentScene

    DB:2.33:Scene Name za


    Application.loadedLevelName gives me Level1, and EditorApplication.currentScene gives me Assets/Level1.unity


    This is my solution to always get Level1

    string GetSceneName()
    {
    string scene;
    if (Application.isPlaying)
    {
    scene = Application.loadedLevelName;
    }
    else
    {
    scene = EditorApplication.currentScene; //Assets/Level1.unity

    int startLetter, endletter;

    for (endletter = scene.Length - 1; endletter = 0; --endletter)
    {
    if (scene[endletter] == '.')
    {
    break;
    }
    }

    for (startLetter = endletter; startLetter = 0; --startLetter)
    {
    if (scene[startLetter] == '/')
    {
    ++startLetter;
    break;
    }
    }

    scene = scene.Remove(endletter);
    scene = scene.Remove(0, startLetter);
    }
    return scene;
    }

  • RELEVANCY SCORE 2.32

    DB:2.32:Huge Sound Drivers Problem dd


    I am having a ridiculous amount of trouble trying to get my sound to work again.

    DB:2.32:Huge Sound Drivers Problem dd

    I am having a ridiculous amount of trouble trying to get my sound to work again.

  • RELEVANCY SCORE 2.32

    DB:2.32:Problem Of Sound Jerked During The Reading Of A Dvd df


  • RELEVANCY SCORE 2.32

    DB:2.32:Want To Stop All Sounds And Start Them Up Too sd


    Hi.

    I have a flash website that is entirely based on videos. It
    loads and starts with an intro. Then a scene where a loop movie
    plays, and depending on which objects from the scene you press on a
    different videos start playing and then back to the scene.

    The problem si that, as with all videos, the sound is
    incorporated into the different videos that load.

    I want to stop or set the volume to zero by pressing on a
    button and to restore the sound by pressing again. How can i do
    that and have the sound stopped even if i load different movies all
    with their sound incorporated?

    Thank you.

    DB:2.32:Want To Stop All Sounds And Start Them Up Too sd

    Hi.

    I have a flash website that is entirely based on videos. It
    loads and starts with an intro. Then a scene where a loop movie
    plays, and depending on which objects from the scene you press on a
    different videos start playing and then back to the scene.

    The problem si that, as with all videos, the sound is
    incorporated into the different videos that load.

    I want to stop or set the volume to zero by pressing on a
    button and to restore the sound by pressing again. How can i do
    that and have the sound stopped even if i load different movies all
    with their sound incorporated?

    Thank you.

  • RELEVANCY SCORE 2.32

    DB:2.32:Re: Htc Evo V - Trouble With Downloading Playlist sm



    Dear Spotify Community,

    I've scanned the boards and seen that some other posts refer to playlist downloading problems for HTC Evo V users. There have also been general complaints about the app's functionality on the EVO V. I'm writing to join the chorus.

    1) I'm regularly unable to download playlists.

    To be clear, some of the playlist selected via mobile or desktop do, in fact, download for listen offline. The problem is that I've been unable to determine a cause of the failure to download other playlist I've added. To troubleshoot, I've tried (1) uninstalling and re-installing the app, in addition to rebooting the EVO (2) canceling the download and trying again (2) initiating the download while using a WiFi connection, while using 3G, and using 4G. I noted that one community member's comment suggested that the app was incompatible with 4G and I've since altered my set-up to no avail.

    2) The app frequently displays a "No Internet Connection" message

    The No Internet Connection banner along the bottom of the screen appears frequently-- even when I'm located in a place with access to 3G or 4G networks. As can be imagined, the false "No Internet Connection" problem compounds the frustration stemming from the app's inability to download some playlists for offline listening.

    The bargain of using the app is to access preferred playlist during, for example, subway commutes where data connections are spotty. I, like many of the app's users, are subway or el commuters at least twice daily. We may also work in buildings were wireless data connections are weak. If the app 1) fails to download playlist for offline listening and 2) fails to access data connections when they're likely available, then having the app isn't providing its intended service.

    3) But I am a Spotify Evangelist!

    Seriously, I have told just about everyone I've encountered that Spotify is the best thing since sliced bread. No, really, without exaggeration. Like many people, music is a huge part of my day and Spotify's promise undoubtedly increases the enjoyment I can have just from scrolling through its nearly limitless catalog. I really want to continue my out-sized fandom for an obviously paradigm-shifting app and service. Are there any indications that HTC Evo users will soon enjoy the ease of use, reliability, and functionality the app deserves? I have one more day til my billing cycle restarts and I'm likely to discontinue paying for a service that has proven so inconsistent in reliability and functionality.

    DB:2.32:Re: Htc Evo V - Trouble With Downloading Playlist sm


    Dear Spotify Community,

    I've scanned the boards and seen that some other posts refer to playlist downloading problems for HTC Evo V users. There have also been general complaints about the app's functionality on the EVO V. I'm writing to join the chorus.

    1) I'm regularly unable to download playlists.

    To be clear, some of the playlist selected via mobile or desktop do, in fact, download for listen offline. The problem is that I've been unable to determine a cause of the failure to download other playlist I've added. To troubleshoot, I've tried (1) uninstalling and re-installing the app, in addition to rebooting the EVO (2) canceling the download and trying again (2) initiating the download while using a WiFi connection, while using 3G, and using 4G. I noted that one community member's comment suggested that the app was incompatible with 4G and I've since altered my set-up to no avail.

    2) The app frequently displays a "No Internet Connection" message

    The No Internet Connection banner along the bottom of the screen appears frequently-- even when I'm located in a place with access to 3G or 4G networks. As can be imagined, the false "No Internet Connection" problem compounds the frustration stemming from the app's inability to download some playlists for offline listening.

    The bargain of using the app is to access preferred playlist during, for example, subway commutes where data connections are spotty. I, like many of the app's users, are subway or el commuters at least twice daily. We may also work in buildings were wireless data connections are weak. If the app 1) fails to download playlist for offline listening and 2) fails to access data connections when they're likely available, then having the app isn't providing its intended service.

    3) But I am a Spotify Evangelist!

    Seriously, I have told just about everyone I've encountered that Spotify is the best thing since sliced bread. No, really, without exaggeration. Like many people, music is a huge part of my day and Spotify's promise undoubtedly increases the enjoyment I can have just from scrolling through its nearly limitless catalog. I really want to continue my out-sized fandom for an obviously paradigm-shifting app and service. Are there any indications that HTC Evo users will soon enjoy the ease of use, reliability, and functionality the app deserves? I have one more day til my billing cycle restarts and I'm likely to discontinue paying for a service that has proven so inconsistent in reliability and functionality.

  • RELEVANCY SCORE 2.32

    DB:2.32:Subway Surfer 9a


    i update subway surfer to seoul, on my lumia 525,when i installed and started to play,the screen goes blank foe more than 10sec,
    what problem is this?????it ll cause any thing serious to my phone????

    DB:2.32:Subway Surfer 9a

    You have to ask the developer.

  • RELEVANCY SCORE 2.32

    DB:2.32:Audio Seems To Auto Level 3s



    Hi,

    today I encountered a problem in my newest project, that came abruptly. In a scene where huge differences in audio volume from one clip to the next were quite important and mixed by me to great effect (i was really proud of myself), now audio suddenly seems to have been normalized autom leveled from one moment to the other, as if premiere was auto leveling my audio in the timeline. When I increase the audio gain on a clip, it seems to have little to no effect and the overall volume seems to go down in parts, where my sound effects should really shoot at the audience for dramatic effetc. Only thing I can rule out is windows screwing my audio, because when I playback a 2 day old render of the scene in VLC Media Player, it has all the audio frenzy that i intended still working the way it should. Really annoying thing. Bothers me quite a bit, as I am approaching completition on the project and handing it over for final mixing. Does anyone in here know what's going wrong?

    I'm running Premiere Pro CS6 Production Premium

    MY SYSTEM:

    OS: Windows 7 | 64Bit | Ultimate

    Motherboard: Asus | P8P67 DELUXE

    Processor: Intel | Core i7-2600K | 3400 MHz

    GPU: Asus Nvidia GeForce GTX760 DC | 2 GB

    RAM: G.Skill | Ripjaws 16GB 1333-999 | 4x4GB

    System-Drive: ADATA | Internal SSD, 128GB | ASP900S3-128GM-C | Sata

    Monitor: Eizo | 23 L FS2331-BK

    DB:2.32:Audio Seems To Auto Level 3s


    I found the solution myself. Going to Preferences Audio Hardware ASIO Settings showed me that somehow I must have checked the 32 bit playback box. Uncheking it got me rid of the problem. Thread can be closed (I hope )

  • RELEVANCY SCORE 2.32

    DB:2.32:Hi-Res Gtaiv Subway Map! x1


    Source- gta4.fr



    DB:2.32:Hi-Res Gtaiv Subway Map! x1

    Huh, thats a clever way around the Getting to other islands.



  • RELEVANCY SCORE 2.32

    DB:2.32:3ds Max Huge Performance Drop With Upgraded Pc 9x


    I recently upgraded my rig from a crappy old thing to something a fair bit better. It still isn't quite a monster but I expected to see a fair improvement in Max and instead I have actually seen performance drop dramatically. I'm getting really low framerates even with an empty scene, I'm fairly sure it is only my viewports that are lagging and I suppose it is a graphical problem. It isn't only when rotating or panning the view but I also lag when scrubbing or playing through animations on the timeline. Its just a constant low FPS which is worsened as soon as I add any geometry into the scene.Here's my specs for my new rig:- OS: Windows 7 Home Premium 64 bit- CPU: AMD Bulldozer FX-4 Quad Core 4100 3.60GHz Processor- Motherboard: AMD 760G Chipset (AM3+) Motherboard- RAM: 8GB DDR3 1600MHz Dual Channel Kit- Hard Drives: 1TB HDD- Graphics Card: asus ati radeon hd 6450 silent edition 1024MB GDDR3 Low Profile- Sound: 7.1 Channel Sound (On-Board)I've been scouring the web for the past couple of days looking for a fix but cant find anything!Things I have already done:Updated all my graphics card driversinstalled all the hot-fixes and service packs from autodeskturned off Aerotried switching to Direct3D or OpenGL (This just made the problem worse)switching from realistic mode to shaded (no difference)Let me stress this is all in a completely empty Max scene!The strangest part of the whole thing is that I noticed the problem when I first set up my new PC and installed the program and that is what made me go and install all the service packs and update all my drivers. This fixed the problem, my framerates were much higher than I was used to with my old rig and I was a happy man. But then the next day when I booted up my system again I was back with the same problem. That's what is frustrating me the most. I know my specs can handle Max to the level I am after as I managed to fix it once but now I'm stuckAny help would be highly appreciated!Thanks

    DB:2.32:3ds Max Huge Performance Drop With Upgraded Pc 9x

    Nothing wrong with AMD. Have a Radeon HD 6800 in mine. Works fine. But if I was to upgrade i'd get a GTX 560 Ti(1Gb). It seems to be on top of all kinds of lists



    Old in animation - New in the rest!

  • RELEVANCY SCORE 2.31

    DB:2.31:Lag Problem 8a



    I got some question.Why my sony xperia J play templer run 2 and subway surf ,it is lag during the game process,how can i solve this problem??

    DB:2.31:Lag Problem 8a

    okay I got it to work but it's still not as smooth as I would want it to be-

  • RELEVANCY SCORE 2.31

    DB:2.31:Error Your Scene Is Using The " Use Mb 5.5 Axis Orientation"Property On A Control Rig. 81


    Dear MB expertsI am new to Motion builder During my study of Motion Builder I opened a file which has been created in older version of MB. when ever Iopen that file it shows an error " your scene is using the " Use MB 5.5 Axis Orientation"property on a control rig." and it shows only the skeletons not the 3d mesh. Please help me how to rectify this problem. Thanks in advancedasappan

    DB:2.31:Error Your Scene Is Using The " Use Mb 5.5 Axis Orientation"Property On A Control Rig. 81

    Hi Dasappan,The warning message around MB 5.5. axis orientation normally indicates that the file was saved in older version of the software which used different setup for IK/Skeleton. Typically the file should load without issue – the problem with the mesh not displaying shouldn’t be related to this. Note: for really old files, some will need to be opened in MotionBuilder 7 or 7.5 for them to open correctly in MotionBuilder 2009 or newer.If you have Gold subscription support setup, you should contact the Autodesk Support team so they can look into the issue further.Best Regards,Lee

  • RELEVANCY SCORE 2.31

    DB:2.31:Hair Fur Grass Scale Issue Between Scenes fd


    I created some pretty nice grass in a test scene, then saved the grass as a preset. The problem is that when I load it into another scene, the grass is huge and all out of proportion. See pics.




    3ds Max 6.5 - Max 2014Windows 8 Intel Core 2 Quad Q9400 2.13 GHZ64-Bit, 8 GB RAMFacebook: https://www.facebook.com/DM.3D.ArtistWebsite: http://dustinmoore.us

    DB:2.31:Hair Fur Grass Scale Issue Between Scenes fd

    You know that did cross my mind. Ill have to check that. That would be wonderful because I really like the ease of use and the look of Hair Fur for grass comparedto other methods. Particle Flow is nice but its crashing my scene right now.



    3ds Max 6.5 - Max 2014Windows 8 Intel Core 2 Quad Q9400 2.13 GHZ64-Bit, 8 GB RAMFacebook: https://www.facebook.com/DM.3D.ArtistWebsite: http://dustinmoore.us

  • RELEVANCY SCORE 2.31

    DB:2.31:No Sound From My Application zs



    Hi packagers, I am trying some of my first testing apps and have a weird problem that iPhone doesn't play any sound

    They works well when publish my scene and test it in Flash Player, but there is definitely no sound played by the device.

    I tried almost everything - change bitrate, use them as embed and dynamic, different file formats ... still no sound.

    I appreciate any help with this issue!

    Thank you!

  • RELEVANCY SCORE 2.31

    DB:2.31:My Subway Surfers Game Problem km


    helo sir,
    in my pc subway surfers game is blinking while playing.

    DB:2.31:My Subway Surfers Game Problem km

    helo sir,
    in my pc subway surfers game is blinking while playing.

  • RELEVANCY SCORE 2.31

    DB:2.31:Paltalk Scene Messenger 10.2 Build 485 - No Sound On Windows 8 64-Bit Idt Audio zm


    Hi,

    I am not a newbie on Paltalk messenger and have been using it for years. Using
    Paltalk Scene Messenger, I was always able to hear sound and use the mic in regular chat rooms on my Windows XP 32-bit and Windows 7 32-bit Machines with Realtek Audio. I recently got a new HP machine with 64-bit Windows 8 and IDT Audio w/BEATS.

    On my new 64-bit Win 8 + IDT Audio machine, I am unable to get any sound in the
    regular chat rooms! Paltalk seems to detect incoming sound--because I can see full bars next to the speaker in the chat room when some1 is playing tunes or using the mic; yet, I am unable to hear it. It seems to be going through to a muted channel.

    I already tried all kinds of settings of sound formats; I also tried running Paltalk Scene in all compatibility modes (and restarted the PC after changing each single setting)-- all to no avail.

    The only sound I am able to get in Paltalk is that of streaming audio SHOUTcast Radio rooms like 977 - 80'S Music Room. All other regular rooms, I cannot get/hear any sound at all. Paltalk's support has no idea what the problem is and thus, was unable to help
    out with the problem at all.

    I know that I am not the only one with this problem--others with 64-bit Win 8 and IDT audio have the same problem. Is this a 64-bit Issue, Win 8 Issue, IDT Audio Issue, or a Paltalk Scene Issue?

    Thank you.

    Note: I am able to hear sound just fine from my media players, the web and also Windows system sounds.

    DB:2.31:Paltalk Scene Messenger 10.2 Build 485 - No Sound On Windows 8 64-Bit Idt Audio zm

    I just found out what the problems is--by coincidence. My PC ran into trouble and I had to do a system recovery process which rolled back my IDT Audio to the original and old driver.

    FAULTY CODEC:
    As it turns out, The new IDT High Def Audio CODEC -- Dated: 10-12-2012 Build: 6.10.6429.0 -- which was offered by Windows Optional Update, was the cause of the problem. It's not compatible with Paltalk. I didn't try other voice chats.

    GOOD/COMPATIBLE CODEC:
    My original IDT High Def Audio CODEC -- Dated: 7-24-2012 Build: 6.10.6418.0 works just fine with Paltalk! Too bad I found that out just two days after purchasing a new USB sound card!

    Please try contacting HP, if possible, about the driver issue so that maybe they'll update/fix their latest driver.

  • RELEVANCY SCORE 2.31

    DB:2.31:Xperia P Jellybean, The Good And The Bad? (Need Help For Bad) fd



    I updated my Xperia P with jellybean yesterday and these are my reviews

    BAD

    1. I can not call any one i.e ( NO outgoing only Incoming)

    2. I can not check my balance ( the USSD codes does not works, it shows an error "Connection problem or invalid MMI code'')

    3. Internet connectivity is lost

    These SYMPTOMS of jellybean occurs only after updating to Jellybean

    I tried reparing my phone too, but all in vain.

    What should I do? Can anyone help me?

    How can I downgrade my SXP to 4.0.4 ?

    on the GOOD side this is what I experienced

    1. less lag in games (the tinest lag in Subway Surfers is now gone,but i saw some frame drops in NFS most wanted which otherwise ran smoothly)

    2. new Walkman with clearaudio+ is amazing (sound quality is improved greatly)

    3. there is less lag during transition between homescreen (filled with widgets and with livewallpaper)

    4. The Camera bug is fixed

    5. Stamina mode really works.

    other features are improved but the basic fuctions of a phone is of no use. its really very sad

    Do anyone else suffer from this problems. I hope its just a network problem

    DB:2.31:Xperia P Jellybean, The Good And The Bad? (Need Help For Bad) fd


    Thanks but everything worked properly again ,lol ,it happened automatically .yipeee

  • RELEVANCY SCORE 2.31

    DB:2.31:A Problem About Scene za



    Hi,everyone.

    i want to know How to change from an UI Scene(UI.scene) to a Game Scene(GameEngine2E.scene)?

    thx~

    DB:2.31:A Problem About Scene za


    Someone has asked a similar question here

    http://community.eu.playstation.com/t5/GameEngine2​D/Using-UI-Toolkit-and-GameEngine2D/m-p/16418721#M​...

    Please let us know if you are still having any trouble.




    PlayStation®Mobile Dev TeamI am like you, I have no name.

  • RELEVANCY SCORE 2.31

    DB:2.31:How Do I Get The Same Song To Play On The Main Menu And During Scene Select sa


    I would like the music to play continuously throught the menu and scene selection. As it is I have to drag the audio file into each scene selection, and the music starts at the beginning.
    At least, is there a way to remove the awful sound track that iDVD has on the themes?

    iMac 20 core Duo Mac OS X (10.4.8)

    DB:2.31:How Do I Get The Same Song To Play On The Main Menu And During Scene Select sa

    Thanks for the info. Disappointing though, my PC ULead software can do this

  • RELEVANCY SCORE 2.31

    DB:2.31:Subway Surfers 7x


    PORQUE O Subway Surfers
    NAO PEGA NO LUMIA 620????

    DB:2.31:Subway Surfers 7x

    e no nokia lumia 520? por que não tem subway surfers,pou e nem dumb ways to die? poderiam me responder por favor?

  • RELEVANCY SCORE 2.31

    DB:2.31:Database Is Not Transferred During Republishing. p3





    What exactly is meant by this?, Version 4.1 solves this huge problem?, And we must act before a case of this kind?

    DB:2.31:Database Is Not Transferred During Republishing. p3




    Probably this message related to modules database which should be re-uploaded during re-publication. Could you give me more details for this situation? When did you get this message? How it could be reproduced?

  • RELEVANCY SCORE 2.30

    DB:2.30:Plz Help Me With My Huge Problem d7



    I have Curve-8900, and a while ago something happened, everytime i plogged my headphone i hear beeeeeb sound like a whistle, it's annoying me very very much

    Plz Help Me With this Huge Problem

  • RELEVANCY SCORE 2.30

    DB:2.30:Prefab Instantiation And Destruction k3



    If you don't do anything about it, it's going to exist as long as your scene does. If there is one or two, that's not a huge problem, if you have a couple thousand, you're in trouble ! So, a common trick to do that, create an empty game object in the middle of your scene with a box collider so big it contain everything, set to trigger. Add a script that destroy everything that comes out of it (OnTriggerExit), and pray for those poor souls. That should do it :)

    DB:2.30:Prefab Instantiation And Destruction k3


    Thank you for all of your answers.


    @BiG I'm fine with the instantiation of the rockets.


    Those solutions are good for me, either use a yield, the second param of destroy or an invisible wall that will destroy on collisions.


    It's not really an advanced topic but when I'm reading all the examples on how to instantiate a rocket, they never destroy the instances and they fall out somewhere in the void under my scene. I was simply worried about memory.


    Francis

  • RELEVANCY SCORE 2.30

    DB:2.30:Allow "Mute" For Videos With Sound fm


    Is it possible to add an option to mute my video clips that have sound? I don't want readers to get in trouble if they are on a subway or on an airplane!

    DB:2.30:Allow "Mute" For Videos With Sound fm

    Thanks GG, appreciate it. I'm wondering if there would be an option if I dropped a video clip into the Keynote module?

  • RELEVANCY SCORE 2.30

    DB:2.30:Unity 3d Singleton Problem m9



    There is also a very good singleton reference on UA, located here. It also has a few alternatives to the singleton pattern.


    Are the two objects that this singleton references also marked with DontDestroyOnLoad? I have a strong feeling they aren't; marking the singleton with DontDestroyOnLoad doesn't keep any of its references alive during a scene change. So what happens is your referenced objects get Garbage Collected during a scene change.

    DB:2.30:Unity 3d Singleton Problem m9


    There is also a very good singleton reference on UA, located here. It also has a few alternatives to the singleton pattern.


    Are the two objects that this singleton references also marked with DontDestroyOnLoad? I have a strong feeling they aren't; marking the singleton with DontDestroyOnLoad doesn't keep any of its references alive during a scene change. So what happens is your referenced objects get Garbage Collected during a scene change.

  • RELEVANCY SCORE 2.30

    DB:2.30:Vgn-A317m Problem Adjust Sound And Brightness During Game j1



    When i adjust sound or brightness during a game, the game stop.Thanks for help

    DB:2.30:Vgn-A317m Problem Adjust Sound And Brightness During Game j1


    I did post all that I could think of in French for you in that other forum.

  • RELEVANCY SCORE 2.30

    DB:2.30:How Do I Lower Sound File Volume During Video Play? fk


    I have a Flash CS4 project with sound that starts to play in the first scene, set to event/loop so that it plays all through the entire time.But I have a piece of video with audio in another scene and I would like to have the sound file playing at a lower volume while the video is playing, then get it to return to normal volume when the video is over. I have no actionscript at this point. Just timeline animations, etc.Anyone have an idea how I could accomplish this?Thanks!

    DB:2.30:How Do I Lower Sound File Volume During Video Play? fk

    if your background sound is attached to a movieclip timeline (eg, mc), use:var s:Sound=new Sound(mc);s.setVolume(10);

  • RELEVANCY SCORE 2.30

    DB:2.30:Sound Help. zj



    Hi all,

    Here's my problem,

    I have a flash file with about 20 different scenes in it. And in one of the scenes there is an audio file that is 15 seconds long. The sound is on a menu page so i only want it in that scene. But if you are on that page for less than 15 seconds and go to another page then it carries on the sound into the next scene and if you go to and from the menu page to another scenes in quick succession you get a build up of sound which is horrible.

    So basically I want to know..

    How to make a sound file play in ONLY one scene.

    Thanks

    DB:2.30:Sound Help. zj


    if your sound is attached to the timeline, assign its sync property to stream.

  • RELEVANCY SCORE 2.30

    DB:2.30:Sound Problem 9j



    Hi. I have a file which contain 10 different scenes in it. In each scenes, there are narrations and buttons to go to the next scene. When i click the next button before the narration ends it will continue playing on in the next scene. What should i do for the narration to only stay at their own respective scene?

    Thank you.

    DB:2.30:Sound Problem 9j


    Do you get any errors? Where are you putting that code? The SoundMixer.stopAll(); should go in the button code that takes you to a new scene.

  • RELEVANCY SCORE 2.30

    DB:2.30:Huge Bug!!! d3



    I used the bone tool

    clicked the the bone animation frame group(unsure of name)

    and clicked properties

    and clicked from authortime to run time

    and i clicked test scene and it all froze and windows was looking for problem

    and my unsaved progress was gone

    does anybody have the same problem?

    DB:2.30:Huge Bug!!! d3


    i am using cs5

    there is no compiler errors when i click on runtime

    it's only when i click test scene that it says

    the program is not working

  • RELEVANCY SCORE 2.30

    DB:2.30:Copy/Paste Unsorts Lists 19


    I need a list of the file names in a folder. I open the folder, do a select all, copy and paste into an email page. The list is totally out of sort order with no rhyme or reason. It doesn't matter where I paste: email, Word, Excel, TextEdit. Anyone know why or better, how to remedy this problem? I've had this problem over the years over various OS and computers. Thanks.

    East Valley HS #1.JPG
    Valhalla #8.JPG
    Valhalla #6.JPG
    Valhalla #4.JPG
    noho signs and trees.jpg
    NH Subway Station #2.JPG
    Academy #3.JPG
    Academy #4.JPG
    Academy #5.JPG
    3018-0071.jpg
    Wells Fargo Bldg. #2.JPG
    Valley of the Stars Sign.JPG
    Valhalla #9.JPG
    another subway entrance.jpg
    Metro sign horiz.jpg
    Subway Shot.jpg
    subway entrance.jpg
    Portal of Folded Wings #1.JPG
    Academy #1.JPG
    3018-0137.jpg
    3018-0073.jpg

    DB:2.30:Copy/Paste Unsorts Lists 19

    It's an odd one to be sure.

    The problem only occurs when copying a list of file names from the Finder. Copying text in a sorted order out of a document to another works fine.

    So... my workaround when I need to communicate files I have in a folder, I copy them, paste into a blank Word doc, sort and then copy/paste the list into whatever target doc, like an email, that I want.

    Not the worst problem I've encountered

  • RELEVANCY SCORE 2.30

    DB:2.30:Re: 3ds Max Generates Huge File With Almost Empty Scene a1


    Hy guys, I've been looking thru many sites and cant find a solution for my problem...I was working a simple 3ds max scene: one table 6 chairs, and 4 sofas, 3 trees and so on...not a big file, and everything was ok. Scene was only 30 mb.But suddently after keep working max file start to increase MB and now, my scene is 350 MB! and render times increase from 3-4 min to 15- 20 min for a 640x480 image.I've also noticed that if I select or create anyOBJECT on scene #40;chair, plants, pictureS#41; and try to "SAVE SELECTED" to a new max file, it keeps a large amount of MB doesnt matter what i select, even a LINE is the same. I open it, and it has no more objetcs/textures on scene, just a 200 MB file.there are not hide geometry, lights, external references attached to sceneThe goal is to clean up my orginal max file #40;35mb#41;, by deleting "something" inserted/corrupt which makes my file increases up to 350 MB, with only few geometry as you can see on image.pleasEEE HELP MEEEEE! I cannot save my objects/textures/model to start a new one clean max file from scratch. And wich is worst...It happened to whole 7 files within THIS PROJECT. All other max files on my pc are ok. So....? anyone? there is a way to purge my scene?Is it a 3DS Max bug i guess

    DB:2.30:Re: 3ds Max Generates Huge File With Almost Empty Scene a1

    The the only way is to start with a clean scene and merge the objects in one at a time, saving and checking the filesize each time. Has to be something wrong somewhere to get that kind of bloat.I've looked and looked at the empty file, having eventually got rid of all vray traces #40;I don't have it so I get errors loading the scene#41; and I can't find anything.



    Max 4.2 through 2016, Composite 2014.Win7Pro x64 (SP1). i5-3570K @ 4.4GHz, 8Gb Ram, DX11.nVidia GTX760 (2GB) (Driver 335.23).

  • RELEVANCY SCORE 2.29

    DB:2.29:Phone Hanging! 7k



    My phone is hanging while i play games like subway surfers and angry birds...also sometimes problem in swiping the application menu!!

    DB:2.29:Phone Hanging! 7k


    Have you tried updating/repairing the phones software? You can do that using a computer and the USB-cable. See http://www.sonymobile.com/global-en/software/phone​s/xperia-j/ for update.If you want to make a repair of the phones software, download Bridge for Mac or PC Companion from http://www.sonymobile.com/global-en/support/phones​/xperia-j/.





    - Official Sony Xperia Support Staff

    If you're new to our forums make sure that you have read our Discussion guidelines.If you want to get in touch with the local support team for your country please visit our contact page.

  • RELEVANCY SCORE 2.29

    DB:2.29:Downgrade Neo V From Ics To 2.3.4 dk



    My is crashing during the programs running such as:"subway surfers , fifa 12, vector" after 5 mins.

    I want to downgrade it, but don't know how??

    Who can help me??

    DB:2.29:Downgrade Neo V From Ics To 2.3.4 dk


    How to manually update, downgrade, root 2011 Xperias

    http://talk.sonymobile.com/thread/38251

    Don't forget the Kudos





    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • RELEVANCY SCORE 2.29

    DB:2.29:Sony Xperia V Screen Flicker During Games And Apps c1



    sony have great mobile phones and amazing ... but all xperia v owners have this problem with screen flicker during games running like csr racing and subway surfer temple run dead trigger ... etc

    plz sony we need to fix this problem as soon as posible.

    the screen going black and then back to pause menue again all the time ... how we can fix this huge problem.







    Solved!
    Go to Solution.

    DB:2.29:Sony Xperia V Screen Flicker During Games And Apps c1

    All of software update fail to fix this flickreing screen. Come on Sony, we need kitkat.

  • RELEVANCY SCORE 2.29

    DB:2.29:Subway Surfer Oyna 8a



    subway surf,subway surfers indir,subway surfers pc,subway surfers pc indir,subway surf armv6,subway surf hilesi,subway surfers oyna,subway surfer,subway surf oyna
    Bir önceki yazımız olan Murgul Devlet Hastanesi Randevu Alma başlıklı makalemizde devlet hastaneleri randevu alma, murgul devlet hastanesi ve murgul devlet hastanesi randecu alma hakkında bilgiler verilmektedir.

    DB:2.29:Subway Surfer Oyna 8a


    subway surf,subway surfers indir,subway surfers pc,subway surfers pc indir,subway surf armv6,subway surf hilesi,subway surfers oyna,subway surfer,subway surf oyna
    Bir önceki yazımız olan Murgul Devlet Hastanesi Randevu Alma başlıklı makalemizde devlet hastaneleri randevu alma, murgul devlet hastanesi ve murgul devlet hastanesi randecu alma hakkında bilgiler verilmektedir.

  • RELEVANCY SCORE 2.29

    DB:2.29:Sound ap


    Hi i have a flash movie, with a pause and play button,

    i also have 4 scenes with a main menu which the user clicks
    to view each scene.

    i have a sound loop on stream, but when you view a scene and
    the scene reaches the scene end stop action, the sound loop stops
    aswell.

    is there away of having a sound loop continuously run for the
    whole movie

    DB:2.29:Sound ap

    right click the sound in your library panel, click linkage,
    tick export for actionscript and enter a name in the id field, say
    soundID and click ok.

    on the frame where you want your sound to start attach:

  • RELEVANCY SCORE 2.29

    DB:2.29:Gtx 295 Single Pcb Hdmi Sound Problem df




    hello,im having an issue with the sound on gtx 295 via hdmi.i have connect the spdif cable mother+vga but no sound via hdmi.in the sound option of my windows 7 64 bit the sound level going up and down during playing sound,music etc but no sound came out.

    DB:2.29:Gtx 295 Single Pcb Hdmi Sound Problem df


    Dont bash oldhag. Please read and comply with the Forum Rules.

    Have you been in contact with MSIs official support? How to contact MSI. MSI support will be closed from the 16th to the 18th I believe for vacation though. Also, if it is a bad VGA, one card does not a bad product make.

  • RELEVANCY SCORE 2.29

    DB:2.29:Humour In Games 87


    Can you think of any? Any games that you've laughed at like you would a film (and in some respects a good book?) Any games that make the popular acronym of 'lol' worthy of use?

    Okay, maybe the odd pinch of laughter. But the problem for me is that this laughter is either brought on something in a game that is inexplicitly cringeworthy (that scene in Fahrenheit in the abandoned subway, for instance) Or a bug that makes us laugh. But usually for me the humour in games is only found from a multiplayer perspective. There is nothing funnier than an intersting game of PES, Eyetoy, Singstar, Timesplitter, MarioKart/CTR

    This is because we are the ones creating the experience and the humour for each other, but why can't the games do it more often?

    Take most singleplayer adventures that have attempted to be funny and there will not be much success. Characters randomly blurt out a sentence that is their to sound funny but just doesn't work, and ends up as a stale attempt to make the player laugh. Most games have cutscenes (and long ones at that) yet as hard as they try it seems they just can't cut it

    The main reason for this is game developers focusing mostly on gameplay etc and giving less time to writing the story, the script and so on. So why can't they employ someone who knows funny? Why can't events in games be made to make us chuckle?

    Why are games so crap in the comedy department? Why aren't they funnier?

    I'm certainly not laughing



    DB:2.29:Humour In Games 87

    The monkey island games are great for comedy. The other one that springs to mind is we love katamari, mainly for the j pop though, funny stuff.

  • RELEVANCY SCORE 2.29

    DB:2.29:Huge Sound Delay. Please Help 78


    Hi my question is about sound delay in windows 8. Same problem was and in win7. So i have dell inspiron n5010 computer with IDT 92HD81B1X sound device (this sound device is only compatible with IDT drivers (realtek is not working, if this would realtek
    i know what to do)). I have installed all drivers and i do a lot of other things but nothing help. Sound delay is huge about 0,5s. I want to record music with win8 but this is imposible for this huge sound delay. Please help!!! I know that and others have
    the same problem maybe someone solve this :(With win XP everything was ok. I just want to plug in my guitar and mic and make some records.

    DB:2.29:Huge Sound Delay. Please Help 78

    Same issue here. The above steps did not help! I read posts all over about this issue with Windows8!

  • RELEVANCY SCORE 2.29

    DB:2.29:Sound Faster Than Video Problem 99


    I just finished a movie in Flash Mx Pro 2004, and whenever i
    play the movie, on the eight scene the sound starts moving faster,
    and the video stays the same speed. I think the sound jumps ahead
    like 10 seconds and then starts going the same speed.

    I don't think it's a problem with my computer, it should be
    able to handle the movie.

    DB:2.29:Sound Faster Than Video Problem 99

    I just did some tests with the movie, and now im sure that
    the sound is moving faster, not just ahead by 10 second for the
    whole movie.

  • RELEVANCY SCORE 2.29

    DB:2.29:Images In Photo's App Smaller Than In Iphoto as


    The images on my Photo's app are considerably smaller than the ones I am sync'ing with in iPhoto.

    They are subway maps, so I need as much detail, and rather huge image to scroll around as possible.

    Is there a way to have them sync to the iPhone at the same size as they are in iPhoto?

    thx!

    DB:2.29:Images In Photo's App Smaller Than In Iphoto as

    I have the same problem. Want to put some of my private hires images on the iPhone. iTunes seems to scale them to iPhone screen resolution. This drives the very nice multi-touch panzoom feature useless, because the zoomed image looks crappy.

    I wonder if there exist other ways of copying photos to iPhone? Some software that simply shows you the iPhone file system and let's you copy stuff back and forth? I'm using a Windows PC btw ...

    Regards,
    iCharly

  • RELEVANCY SCORE 2.28

    DB:2.28:Retiming An Animated Scene x3


    hey guys, Id like to offset some animation for an entire scene. is there an easy way to do this, besides selecting everything and dragging it over manually?#40;id do that, but this scene file is huge and is crashing often#41;

    DB:2.28:Retiming An Animated Scene x3

    hey guys, Id like to offset some animation for an entire scene. is there an easy way to do this, besides selecting everything and dragging it over manually?#40;id do that, but this scene file is huge and is crashing often#41;

  • RELEVANCY SCORE 2.28

    DB:2.28:Subway Surf j9


    Dış ülkelerde mağazada bu uygulama warken turkiyde neden yok.

    DB:2.28:Subway Surf j9

    faruksio bu video ole tamada bunun gibi yuzlerce war adamlar forum sitelerinde xap. dosyasini koymuslar unlock olayi olmasa indirecemde.Bu adamlar nereden buluyor onu anlayamiom.

  • RELEVANCY SCORE 2.28

    DB:2.28:How To Make Sound Stop In All Scene In Unity 1s



    Set the AudioListener.volume to 0.

  • RELEVANCY SCORE 2.28

    DB:2.28:Muffled Sound During Loud Scenes k8


    Hi all,

    This is hard to explain, but my sky+ hd box is connected to my Samsung TV via HDMI cable, but when there is a loud scene, or scene with lots of sound levels, such as music, a person singing, and a crowd cheering all at the same time, the sound becomes muffled, almost as if the tv can't process all the sounds at the same time?

    I have checked my sound settings and it says output - optical is DD, but there isn't an option to tell the box that the output is actually HDMI.

    I think my box is outputting in 5.1 which my tv can't cope with.

    Any suggestions??

    DB:2.28:Muffled Sound During Loud Scenes k8

    You are quite right, no optical input to the TV.

  • RELEVANCY SCORE 2.28

    DB:2.28:Sound Problem Iphone 3g f8


    Often the sound of the key's during writing or sound of phone speaker stops.
    What can I do myself?
    Should I send it back to Apple?

    DB:2.28:Sound Problem Iphone 3g f8

    Page 46 of the manual:

    "If something isnt working right, restarting, force quitting an application, or resetting
    iPhone will likely solve the problem.
    Restart iPhone: Press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and
    hold the Sleep/Wake until the Apple logo appears.
    If you cant turn off iPhone or if the problem continues, you may need to reset. A reset
    should be done only if turning iPhone off and on doesnt resolve the problem.
    Force quit an application: Press and hold the Sleep/Wake button on top of iPhone
    for a few seconds until a red slider appears, and then press and hold the Home button
    until the application quits.
    Reset iPhone: Press and hold the Sleep/Wake button and the Home button at the
    same time for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix A, Troubleshooting, on
    page 190. "

    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • RELEVANCY SCORE 2.28

    DB:2.28:I Capture Hdv In Adobe Premiere 4 , From Sony Hdr-Fx 7 E To Sony Vaio Ar 71 S. After 10 -15 Minutes Of Editing Desynchronisation Sound From Image Appear . I Have Another Problem With Detect Scene In Capture . Files Capture Is Movie Mpeg. k8



    I capture HDV in Adobe Premiere Elements 4 , from Sony HDR-FX 7 E to laptop Sony Vaio AR 71S . After 10-15 minutes of editing , appear a desynchronisation of sound from image . I had another problem with " detect scene " in capture . Files ( format ) captured are movie mpeg .

  • RELEVANCY SCORE 2.28

    DB:2.28:Sound Recording Is Very Soft After I Update To 1.0.1 7x


    I have the problem with my nano5. I cant hear the sound during I recording video camera and recording voice memo. I only can hear the hissing sound and the sound recorded is too soft. I don't have this problem during I am using 1.0.

    DB:2.28:Sound Recording Is Very Soft After I Update To 1.0.1 7x

    I bought my wife a nano 5th gen a few days back, and it wont record sound too as far as i know. the recorded video / voice memo just played noise/hissing sound. is there any way to fix this other than resending it back to Apple?

    Thanks!

    Message was edited by: iqbalbaskara

  • RELEVANCY SCORE 2.28

    DB:2.28:[Solved] Vlc: Sometimes No Sound After Jump 8j



    When jumping to random places during video playback in vlc (e.g., to look for a particular scene), I notice that sometimes sound playback quits. Jumping around some more often restores sound playback, but sometimes it takes several jumps to get the sound back. How many jumps it takes to reproduce the problem or make it go away seems to be random. This is happening on all video files Ive tried.

    I never had this problem before I upgraded my system on 3/1/15. My current vlc version is 2.2.0-1. I tried downgrading just vlc to the version I had before the upgrade (2.1.5-5) and the problem is still there. I also tried installing phonon-qt5-vlc (since during the upgrade pacman asked me whether to install phonon-qt5-gstreamer or phonon-qt5-vlc and I chose pacmans recommendation, which was phonon-qt5-gstreamer) and that did not solve the problem, either.

    Im not sure where to go from here. Can someone please help me troubleshoot further?

    Last edited by bdantas (2015-03-12 21:22:50)

    DB:2.28:[Solved] Vlc: Sometimes No Sound After Jump 8j


    I tried smplayer and am happy to report that it is a drop-in replacement for vlc. The issue that prompted me to open this thread does not affect smplayer at all.

    graysky, I found that the functionality of your mplayer-resumer wrapper script is built into smplayer. It is a very nice feature.

    I think the issue I reported is a bug in vlc and not arch-related. Also, smplayer is a very satisfying workaround. I will mark thread as solved.

    Last edited by bdantas (2015-03-12 21:23:18)

  • RELEVANCY SCORE 2.27

    DB:2.27:Is It Possible To Have Multiple Scenes Active At A Time? zk



    Well, a scene is basically just a collection of GameObjects. The sum of everything you see in your Hierarchy comprises a 'scene'. Loading a scene is to Destroy all the gameobjects you have, and load a bunch of new ones, to put it bluntly.


    If you don't want to destroy the ones you have, you can call LoadLevelAdditive instead, which will simply add all of Scene 2's GameObjects to your Hierarchy without destroying those from Scene 1. But then you have to keep track of which gameobjects got added so you can destroy them manually again to return to scene 1.


    It doesn't sound like multiple active scenes is really the core of your problem, though. To me, it just sounds like you want to preserve the data that follows your main player. That is, when a scene change occurs, you don't want your player's score to reset. To accomplish that, you can put DontDestroyOnLoad(gameObject) into the Awake or Start method of your main player script, causing it to survive scene changes, including his score.


    The only pitfall with that strategy is that the scene that initially creates the main player must be non-revisitable. If not, then you'll get additional main player objects every time the user returns to that scene. :)

  • RELEVANCY SCORE 2.27

    DB:2.27:Sound Blaster Live! Weird Centre Speaker.. c7


    Hi everybody,
    I'm new to this whole scene and this is the first sound card i've actually bought, (before I was using onboard sound) so bear with me here folks!

    My problem is with my centre/subwoofer output (yes I know this problem has been posted many times). The strange thing is that the centre speaker seems to be outputting very low sounds, like it's acting as the subwoofer..

    The subwoofer itself outputs no sound whatsoever. I've tried mixing and matching the speaker cables' input into the soundcard, and the centre/sub are still functioning.

    The sub/centre cable is plugged into the orange port of the sound card which i believe is the digital out. The rear and front speakers are plugged into the correct holes as they output sound with no problems during the test sequence.

    So there's my curious problem. The only thing I haven't done to try and fix it is to disable the onboard sound in the bios, but I don't know if this will help or not, or where to find the option to switch it off in the bios menu. Any help would be greatly appreciated, I need to get back to playing F.E.A.R.!
    Regards,
    Monkey06

    DB:2.27:Sound Blaster Live! Weird Centre Speaker.. c7

    Actually scratch that last question, I've unplugged the subwoofer input from the back of the sound card and now the centre/sub are working perfectly. What the hell is going on?

  • RELEVANCY SCORE 2.27

    DB:2.27:Can't Open Internal Storage And Very Lag 1z



    i have problem opening my internal storage, last few days i can open it, it started yesterday, i can only open my sd card.

    i notice my xperia go is very lag, games like asphalt 7, mega jump, subway surfer.... the screen just stop there and won't move but the sound of the game still running.

    please help, anybody, and i heard that 4.0 for xperia go is already out, should i upgrade it, ive been hearing a few bad comments about the ics, should i upgrade? how to upgrade?

    DB:2.27:Can't Open Internal Storage And Very Lag 1z


    you can solve this issue by:

    First plugin your usb to your phone then to your computer:

    1. enable debugging service

    2. return and go to application services, select all and look for tne MntApp, select and clear data

    3. return to debugging service and this time uncheck

    4. wait untill you computer redetects your phone, internal mem and sd. be patient until all are set - time depends on how large is your sd

  • RELEVANCY SCORE 2.27

    DB:2.27:Stopping The Sound In A Scene 1f


    My app has several scenes, each with its own sound track.
    When you go from "scene 1" to "scene 2", the sound in "scene 2"
    starts but the sound in "scene 1" does NOT stop. Both sound tracks
    play simultaneously. If I go back to "scene 1" yet another "scene
    1" sound track starts even while the original "scene 1" sound track
    is still playing. So, at this point, we have three sound tracks
    (two from "scene 1" and one from "scene 2") playing simultaneously.

    Is this a bug or a feature? How do we stop the sound in a
    scene when we leaves that scene?

    DB:2.27:Stopping The Sound In A Scene 1f

    put this code on starting of all scenes
    SoundMixer.stopAll()

    it will work

  • RELEVANCY SCORE 2.27

    DB:2.27:Maya Won't Playback The Scene k7


    Hi guysI installed maya 2012 hotfix 2 but 2 days later when I press playback button nothing happens. In empty scenes the frame will not change from 1 and in a heavy scene with animation and sound just the mouse pointer changes from arrow to loading circle repeatedly and frame doesn't change. but playblast and mouse dragging on time slider works.another problem is in playblast with sound. when I use fcheck I have sound and when I use avi there's no sound!can anybody tell me whats the matter?thanksmy config:Windows 7 64bitAutodesk maya 2012 hotfix 2Inetl i5 760Asus p7p55d pro6 gb of corsair DDR3 memoryAti radeon 4670 HD Sapphire

    DB:2.27:Maya Won't Playback The Scene k7

    Hi guysI installed maya 2012 hotfix 2 but 2 days later when I press playback button nothing happens. In empty scenes the frame will not change from 1 and in a heavy scene with animation and sound just the mouse pointer changes from arrow to loading circle repeatedly and frame doesn't change. but playblast and mouse dragging on time slider works.another problem is in playblast with sound. when I use fcheck I have sound and when I use avi there's no sound!can anybody tell me whats the matter?thanksmy config:Windows 7 64bitAutodesk maya 2012 hotfix 2Inetl i5 760Asus p7p55d pro6 gb of corsair DDR3 memoryAti radeon 4670 HD Sapphire

  • RELEVANCY SCORE 2.27

    DB:2.27:S-Video Dell 2407wfp a3


    Hi, I've a 2407WFP. I'm quite enthusiast about this monitor but I've a problem when I hook a Digital TV decoder in the s-video port. The image is good and sharp but when the scene changes from dark to white (especially during the promos with a lot of scene changes) the backlight goes to maximum intensity and all becomes white with no contrast like an overexposed photo.

    DB:2.27:S-Video Dell 2407wfp a3

    Thank you Malow, I did it. You're a Ace.

  • RELEVANCY SCORE 2.27

    DB:2.27:Mesh Detaching From Rig When Loading And Rendering 17


    I have a mesh that is detaching from its rig when I load the scene for the first time. Reloading appears to fix the problem but the mesh detaches again during batch rendering (but not during single frame renders). I've tried detaching and reskinning, importing into a new scene, optimizing the scene, and deleting history. None of these things seem to fix it. If you have any clue what is causing this please let me know.

    DB:2.27:Mesh Detaching From Rig When Loading And Rendering 17

    I have a mesh that is detaching from its rig when I load the scene for the first time. Reloading appears to fix the problem but the mesh detaches again during batch rendering (but not during single frame renders). I've tried detaching and reskinning, importing into a new scene, optimizing the scene, and deleting history. None of these things seem to fix it. If you have any clue what is causing this please let me know.

  • RELEVANCY SCORE 2.27

    DB:2.27:Hi Model Kdl40hx803, Having Itermittent Sound Blips Appears To Be Mainly On Hd Channels, Any Ideas Please? xs



    Purchased this model KDL40HX803 December 2010 ..in the past 6 weeks October 2011 have noticed a breakdown in the sound, itermittent and random blips when either music or scene changes (ie, when going into a an advert) the sound breaks and stutters, so miss sylables from time to time during dialogue/singing. my manufacturers warranty for the year expires on the 5 Dec 2011. is this a problem which needs a warranty claim or can it be rectified by myself? is getting rather annoying now, have tried all the remedial checks, Ie. the HDMi cables checked, a sound reset, a programme re set..owing to the digital switchover..HELP pleeeeease. Thanks







    Solved!
    Go to Solution.

    DB:2.27:Hi Model Kdl40hx803, Having Itermittent Sound Blips Appears To Be Mainly On Hd Channels, Any Ideas Please? xs


    Hi,

    have you performed a firmware update on your tv recently if at all?, it may be crying out for an update which may be the solution to your problem.

  • RELEVANCY SCORE 2.27

    DB:2.27:3d Space Maps - Are They Possible? af



    That sound pretty strange, but I'll give it a shot.


    Do you mean a skybox, which is a huge box containing the whole scene with it's normals turned inwards, having a set of 6 textures to simulate the far environnement, usually the sky, but is perfect for space as well ? The hard part here is to find a decent set of texture.

    DB:2.27:3d Space Maps - Are They Possible? af


    Thanks Quontex Will give it a look.


    Syclamoth and Berenger: Not sure you have understood what I have written.


    I want top make a space travel game. The spacecraft will need starcharts mapping the places (solar systems) which can be travelled to. I want the map (the starchart) to be 3D in 'effect' not necessarily in 'look'. i.e. To explore the Starchart you can go sideways, up or down (as in ordinary 2D maps) but also forward and backward (because space doesn't exist on a flat surface). I'd also like the option for planets and stars to enlargen when selcted for closer view - they don't have to zoom right in however - just enough to give a little more detail. i.e. A small white dot labelled 'Solar System 1' can be clicked and the map will zoom slightly to show the planets of that solar system.


    I would have thought that this would be possible to do, existing as a simple game 'scene' (or 'world?') with spheres, surely? Then, this *emphasized text*game scene (the starchart) would be accesible at the press of a button from the cockpit of the spacecraft which itself is another game scene within a game scene (or world) (i.e. gamescene becomes map).


    What do you think?

  • RELEVANCY SCORE 2.27

    DB:2.27:Reset Subway Surf In&Nbsp; Game Center a7


    Reset subway surf in game center

  • RELEVANCY SCORE 2.27

    DB:2.27:Imported Sound Problem ( No Sound ) 11


    I imported a wav (also tried aif) file into my scene. set the playback to 24 fps. the sound file's graphic is loaded to the timeline successfully.but when I press play there is no sound. I check my sound card and related configuration. they're seems to be ok. Also I followed many tutorials for importing sound to maya to find if I'm doing something wrong. But I had no chance. thanks for replies.

    DB:2.27:Imported Sound Problem ( No Sound ) 11

    Thanks a lot vfxforge I didnt know it had to be 16 bit . It works like a charm now =)thanks so much.

  • RELEVANCY SCORE 2.27

    DB:2.27:Sound On/Off Button a3


    I am creating an elearning movie with many scenes. for each a
    scene an external sound clip loads. i would like to create a sound
    on/off button. I can create the button and turn the sound off. But
    the problem i have is that it only turns it off for that particular
    scene. So when the user goes to the next scene. the sound will come
    back on because it loads an external sound clip. Is there any way
    that the user can switch the sound on/off and it effects the all
    the scenes?

    Thanks

    DB:2.27:Sound On/Off Button a3

    Your compilation time and SWF size should be the same. If
    your layers are getting a little complex, use layer folders to
    separate things out.

  • RELEVANCY SCORE 2.27

    DB:2.27:Different Sound Levels On Same Sound Clip jm


    Hi everyone.

    During a scene in a iMovie project I'm doing, there's a background song. I'd like to reduce the volume sound of the song just for a few seconds so a person that is talking can be heard.
    When I change the sound mix between movie background sound and the song, it affects the whole song. Is there any way to change the sound levels of the same track for a few seconds?

    Thank you all.

  • RELEVANCY SCORE 2.27

    DB:2.27:Animation Keys Are Lost In The Scene File cx


    There is a problem while opening the scene file #40;animation keys are lost once saved#41;. The scene file is saved in .ma format and the characters and BG files are referenced in the scene file and i am not facing this problem in all the referenced scene files and it occurs randomly, the application maya which i am using is version 7.0. if someone could provide me a solution , it would be an immense help for me to save my precious time during my production schedule.

    DB:2.27:Animation Keys Are Lost In The Scene File cx

    There is a problem while opening the scene file #40;animation keys are lost once saved#41;. The scene file is saved in .ma format and the characters and BG files are referenced in the scene file and i am not facing this problem in all the referenced scene files and it occurs randomly, the application maya which i am using is version 7.0. if someone could provide me a solution , it would be an immense help for me to save my precious time during my production schedule.

  • RELEVANCY SCORE 2.27

    DB:2.27:The Quality Of Video And Sound Is Degrading With Time. 7m


    One movie is stored on my D Drive of hard disk. The format is AVI and its taking about 700mb of space on the disk.
    On watching my favourite scene of the movie again and again i noticed that the quality of video and sound of that scene is degrading than rest of the movie .

    Can u suggest me anything so that this problem of degarding does not occur as this is my favourite scene.

    DB:2.27:The Quality Of Video And Sound Is Degrading With Time. 7m

    It can't be the file so it has to be either your player and/or the sound drivers and settings.

    Right click Speaker Icon - Playback Devices - Highlight Speakers and on Lower Left - Configure -
    Click - NEXT - Click Full Range (unless you have surround sound)
    Also go back and Higlight Speaker and on lower right Properties.

    Control Panel - Sound also is same place

    Look in Control Panel for ANY Audio Managers.

    Check in Control Panel - Device Manager - Sound - you might need to look at devicemaker's site for newer drivers.

    What player are you using, some have Equalizers and other sound enhancers.

    http://maximumpcguides.com/windows-vista/enable-and-adjust-windows-media-player-11-graphic-equalizer/

    Also I have used DFX for years on WMP, WinAMP and others (you can get a single player version or a master pack for many players)

    http://www.fxsound.com/dfx/index.php?vendor=0subvendor=0plus=0refer=0

    Rob - Supporting Member, Cascade Bicycle Club P.O. Box 15165 Seattle, WA. 98115-0165 206-522-3222 and 24 hr hotline 206-522-BIKE http://www.cascade.org