• RELEVANCY SCORE 3.27

    DB:3.27:Error 0x80070035 Windows 7 xx





    I'm having an error when I try to connect to another computer on my network
    the error is:error 0x80070035

    DB:3.27:Error 0x80070035 Windows 7 xx

    Hi,
    ·Is it a wired or wireless network? Was it working fine before?
    ·Did you make any hardware/software change after which the issue started?
    I would suggest you to follow the steps as below and check if it helps.
    Step 1:
    Run the Network troubleshooter first to see if it can help diagnose and solve your problem.
    Open networking troubleshooters
    Step 2:
    Temporarily disable the antivirus software and check if you are able to connect to the shared folders.
    Disable antivirus software
    Warning:Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other
    software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this helps. Let us know if you need further assistance.

  • RELEVANCY SCORE 3.21

    DB:3.21:Windows 7 System32 Error Code 0x80070005 m1





    I also have another error: file or directory is corrupted and unreadable 0x80070570

    DB:3.21:Windows 7 System32 Error Code 0x80070005 m1

    Hello JillianGeorge,

    1. Tap F8 during startup to get to the Startup Options menu.

    2. Choose Repair Windows.
    3. After choosing the location and logging on, click on the Command Prompt option.
    4. Type the following command followed by the ENTER key:

    CHKDSK C: /F
    5. Let CHKDSK run to completion. It may take some time so be patient and do not restart the computer while it is running.

    6. When CHKDSK has completed, restart and see if we can get into normal and/or safe mode.
    Let us know if you have any questions.
    Best regards,
    Matthew_Ha

  • RELEVANCY SCORE 3.13

    DB:3.13:In Windows 7, Trying To Do Backup, Getting Error 0x80004001 sc





    I am trying to burn a backup copy of windows 7 to disk. I get error msg 0x80004001. Itried to downlload a fix but it was not compatible with windows 7. I have been unable to find another soution

    DB:3.13:In Windows 7, Trying To Do Backup, Getting Error 0x80004001 sc

    Change backup preferences again. (change latter of the disk where is backup) Works for me.

  • RELEVANCY SCORE 3.13

    DB:3.13:Error 7 (Windows Error 126) cp


    error 7 (windows error 126)

    DB:3.13:Error 7 (Windows Error 126) cp

    plug in ipod iphone etc. when downloading actually starts worked for me

  • RELEVANCY SCORE 3.08

    DB:3.08:Update Error 800705b4. W7 Kb2529073 Failed To Install k9


    Update failed Win 7 KB2529073. each time I open the computer I get configuring update which is taking five minutes then another fail message, error 800705b4

    DB:3.08:Update Error 800705b4. W7 Kb2529073 Failed To Install k9


    Hi
    Try to follow the steps from this link: Windows Update error 800705b4
    http://windows.microsoft.com/en-GB/windows7/Windows-Update-error-800705b4

  • RELEVANCY SCORE 3.06

    DB:3.06:Cannot Backup Windows 7 64bit - Error Code 0x80070020 1c


    Original title: backup of windows 7 64 bit issues with it not completing
    hi, im having a problem under windows 7 professional 64 bit. when I run a back up to any of my hard drives it will all most finish then get an error stating that the process can not access the file because it is being used buy another process.
    error code 0x80070020
    please any help would be appreciated

  • RELEVANCY SCORE 3.03

    DB:3.03:When Trying To Install Itunes On Windows 7, Receive Error Codes 0x80070002, 80070652, And 652 kp


    I am receiving error codes 0x80070002, 80070652, and 652. I am also havingproblems with the install wizard, it keeps telling me I need to finish one install before I can do another one. I am not trying to do another install.
    I do not have anyversion of iTunes or Quicktime installed. I am running windows 7 64
    *original title - I am trying to download iTunes 10 and am required to download Quicktime onto Windows 7*

    DB:3.03:When Trying To Install Itunes On Windows 7, Receive Error Codes 0x80070002, 80070652, And 652 kp

    Try doing a clean boot:
    * Click Start, type msconfig in the Start Search box, and then press ENTER.
    * Accept User Account Control permission
    * If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
    * On the General tab, click Selective Startup.
    * Under Selective Startup, click to clear the Load Startup Items check box.
    * Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
    * Click OK.
    * When you are prompted, click Restart.
    * After the computer starts, proceed with the installation.

    Right click the iTunes setup executable, click Run as Administrator to see if it works:

    64-Bit download:
    http://support.apple.com/kb/DL1037

  • RELEVANCY SCORE 3.02

    DB:3.02:Sap Omniportlet Registration Failed sz


    Hi

    I am trying to "Register the OracleAS Data Source Plugin for OmniPortlet for SAP Provider" and I getting following error message.

    Internal error (WWC-00006)
    Unexpected error - ORA-06550: line 1, column 7:
    PLS-00352: Unable to access another database 'PORTAL_DBLINK'
    ORA-06550: line 1, column 7:
    PLS-00201: identifier 'WWCTX_API_VPD@PORTAL_DBLINK' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored (WWC-35000)

    Thanks
    Ashok

    DB:3.02:Sap Omniportlet Registration Failed sz

    Hi

    I am trying to "Register the OracleAS Data Source Plugin for OmniPortlet for SAP Provider" and I getting following error message.

    Internal error (WWC-00006)
    Unexpected error - ORA-06550: line 1, column 7:
    PLS-00352: Unable to access another database 'PORTAL_DBLINK'
    ORA-06550: line 1, column 7:
    PLS-00201: identifier 'WWCTX_API_VPD@PORTAL_DBLINK' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored (WWC-35000)

    Thanks
    Ashok

  • RELEVANCY SCORE 3.01

    DB:3.01:Restore From Backup Of Another Pc 7d


    I have backed up, onto a WD external hard drive, a Windows 7 PC. When I come to restore individual files to a different Windows 7 PC, I get a permissions error.

    What do I need to do to either the files, or the original PC, to ensure that this permissions error goes away?

    DB:3.01:Restore From Backup Of Another Pc 7d

    If you are looking for a quick way to take ownership of those files, check this article:

    Add or Remove the Take Ownership Option to the Right Click Context Menu

  • RELEVANCY SCORE 3.00

    DB:3.00:Error Code 28could Not Find Any Drivers . Windows 7 64 Bit Could Not Find The Drivers For My Seagate Backup Plus. The Same Device Is Working For Another Windows 7 32 Bit Version. za


    I have tried to connect my Seagate Backup plus with my computer. I couldn't install it. It says Access denied with error code 28.

    DB:3.00:Error Code 28could Not Find Any Drivers . Windows 7 64 Bit Could Not Find The Drivers For My Seagate Backup Plus. The Same Device Is Working For Another Windows 7 32 Bit Version. za

    Hi,

    Thanks for the updated information.

    Your efforts to resolve this issue is very much appreciated.

    Feel free to post your query here on Windows Forums, we would be happy to assist you.

  • RELEVANCY SCORE 2.99

    DB:2.99:Problem Using System Generator With Windows 7 s9



    Hello,

    I have installed DSP tools on Windows 7 but once I start a System Generator block it shows the following error message:

    "Error using xlCOM Server at 13

    Unable to start COM Server 'sysgengui10_1.Waitbox"

    I made another installation but it didn't fix the problem.

    Is there a way to make it work with Windows 7 just like Windows XP?

    DB:2.99:Problem Using System Generator With Windows 7 s9

    Windows 7 isn't supported until 13.1. It does mostly work with Windows 7 in 12.2 - 12.4.



    ChrisVideo Solutions Center: http://www.xilinx.com/support/answers/56851.htm

  • RELEVANCY SCORE 2.99

    DB:2.99:I.E Has Caused An Error In Flash c9


    Hi all
    Here's another puzzle for you. I have another friend who has uninstalled and reinstalled flash 7 (Win XP) and everytime he installs it and opens IE he gets the above error "I.E. has caused an error in flashplayer.exe and will now close"
    Any ideas or theories?



    DB:2.99:I.E Has Caused An Error In Flash c9

    I tired the flash uninstaller and it said "flash ocx is currently being used" yet the flashplayer is not in the list of programs.

    I deleted that out of Internet Options; flash uninstaller ran successfully. We were able redownload flash 7, and so far, everything is okay.

    Message was edited by: H2O



  • RELEVANCY SCORE 2.97

    DB:2.97:Integration Error Ssl Failure Running Another Product.Frm-41211 7p


    Não consigo gerar um relatório forms no Windows 7, forneço os parâmetros e quando aciono o botão executar aparece a mensagem de erro descrita a seguir:
    "Integration error: SSL failure running another product.(FRM-41211)"
    Sendo que o mesmo relatório funciona normalmente no Windows XP, seria incompatibilidade entre as versões?

    DB:2.97:Integration Error Ssl Failure Running Another Product.Frm-41211 7p

    Acrescentando mais uma possibilidade, no meu caso, monitorando o problema era de comunicação com a impressora.

    Para fazer um teste, basta definir outra impressora como padrão (uma de PDF por exemplo).

    Funcionou normalmente. Após isso removi o driver da impressora anterior e reinstalei, voltando ao comportamento normal.

  • RELEVANCY SCORE 2.96

    DB:2.96:Not Able To Link Another Computer On Our Network az


    I use windows 7 utimate and I tried linking another computer on our network to get some files. The message that was returned was error code 0x8007003. The network path is not found.

    DB:2.96:Not Able To Link Another Computer On Our Network az

    Hi,

    1. Is your computer connected to a domain?
    2. What is the number of computers on the network?
    3. Is it a wired or wireless connection?
    4. What is the version of Windows installed on the other computer?
    5. Have you made any software or hardware changes to your computer prior to this issue?

    To work with this issue, refer these methods.

    Method 1:

    Step 1:

    Start your computer in safe mode with Networking.
    http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

    NOTE: refer 3 from the above link, Advanced startup options (including safe mode).
    http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

    Select Safe Mode With Networking.

    Check if the issue persists in this mode.

    Step 2:

    Perform a clean boot of the computer.

    Clean boot- It’s a process wherein you can start Windows 7 by using a minimal set of drivers and startup programs.
    A clean boot helps eliminate software conflicts.

    Please refer the following link to obtain information on how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.microsoft.com/kb/929135
    Check if the issue persists.
    NOTE: Ensure you perform the step 7 mentioned under “Reset the computer to start as usual”
    after you check if the issue persists in clean boot, at the above link.

    Method 2:

    Refer:
    Enable or disable network discovery
    http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

    Check if it helps.

  • RELEVANCY SCORE 2.95

    DB:2.95:Error 205 mp



    hello,

    I am having problems re-installing the creative cloud. Error 205 appears during installation. I've tried to install with another browser, but the error continues. I'm using a MAC, iOS 7. What can I do to resolve?

    DB:2.95:Error 205 mp


    Hi MMB25,

    Please refer to the below mentioned links for solution:

    Sign in, activation, or connection errors | CC, CS6, CS5.5

    Installation, launch log errors | CS5, CS5.5, CS6, CCM

    You may also contact Customer/Chat support:

    Adobe - Contact Support Download and Installation

    Let us know if this helps,

    Regards,

    Gurleen

  • RELEVANCY SCORE 2.95

    DB:2.95:Ts3074 I'M Running Windows 8.1 And Keep Getting An Error 1c


    I get an error message when I download iTunes and I can't access my account. I get another error 7 (Windows Error 127). Is there a specific download that works for 64-Bit WIndows 8.1?

    DB:2.95:Ts3074 I'M Running Windows 8.1 And Keep Getting An Error 1c

    I get an error message when I download iTunes and I can't access my account. I get another error 7 (Windows Error 127). Is there a specific download that works for 64-Bit WIndows 8.1?

  • RELEVANCY SCORE 2.95

    DB:2.95:Uninstalling Program Error Message Another Program Is Being Installed k1


    I am running Windows 7 Enterprise. When trying to uninstall a program, I receive this error message: Another program is being installed. Please wait until that installation is complete, and try installing this software again. I am not aware of any
    program being installed. How do I fix? Thanks.

    DB:2.95:Uninstalling Program Error Message Another Program Is Being Installed k1

    Thank you for your response. The issue is not confined to a specific program. Everytime I want to uninstall a program, I get the same response about a program not yet finished loading. The solution and link that you provided helped me in uninstalling
    the programs that I wanted to uninstall, but it did not solve the core problem that everytime I try to uninstall a program I get the same answer. And I am curious as to what the program is that is supposedly not completed loading.
    Thanks.
    Gary

  • RELEVANCY SCORE 2.94

    DB:2.94:Error Update 80248009 sj


    ANYONE CAN HELP WITH A SPECIFIC PROBLEM?CANT UPDATE WINDOWS 7.ERROR 80248009.DONT GIVE ME SOLUTIONS FOR ANOTHER PROBLEMS.THE ERROR IS 80248009 HOW MANY TIMES I HAVE TO REPEAT IT?PLEASE

    DB:2.94:Error Update 80248009 sj

    ANYONE CAN HELP WITH A SPECIFIC PROBLEM?CANT UPDATE WINDOWS 7.ERROR 80248009.DONT GIVE ME SOLUTIONS FOR ANOTHER PROBLEMS.THE ERROR IS 80248009 HOW MANY TIMES I HAVE TO REPEAT IT?PLEASE

    I have the same problem. I have followed all the steps listed below and the problem still persists. I am using Windows 7 64bit version.

  • RELEVANCY SCORE 2.94

    DB:2.94:Windows 7, Office 2013, Error Something Went Wrong, Office Cant Do That Right Now Because Your Product Is Busy With Another Task. ... 8p


    I have tried the web site, read many (most) of the discussion, but I am stymied. Seeking advice.

    DB:2.94:Windows 7, Office 2013, Error Something Went Wrong, Office Cant Do That Right Now Because Your Product Is Busy With Another Task. ... 8p

    Hello James,

    What are you troubleshooting steps you've tried so far?
    Try the following and verify the result:

    1) Follow the instructions mentioned in the following KB article and verify the result:
    http://support.microsoft.com/kb/2827031

    2) Run ‘Fix it’ from the article below to remove any remnants of Office installation files and then try re-downloading and installing the Office suite:
    http://support.microsoft.com/kb/2739501
    Note: Save the ‘Fix it’ before running it as you’re working on 64 bit Windows. And ensure that you have the Office installation source and the product key for the Office suite before running the ‘Fix it’.

    If you’re unable to run ‘Fix it’, follow Manual steps to ensure that Office installation files are removed and see if it helps.

    3) You may also refer to the following thread link which discusses about common Office installation issues and see if it helps:
    http://answers.microsoft.com/en-us/office/forum/office_2013_release-office_install/problems-installing-office-2013-and-office-365/42d81528-c7a9-4604-8687-f85f4df9770e

    I hope the above suggestions helps to resolve your issue. Take your time to try the suggestion and let me know the results at your earliest convenience.

    Thank you.

  • RELEVANCY SCORE 2.93

    DB:2.93:Creative Cloud Installation Error 87 x8



    Hi there,

    I am trying to install Creative Cloud desktop

    I get the following error:

    Another installer is currently running, which must be closed

    Error code: 87

    Running Windows 7 and I dont believe I have any other installers running

    Thanks for any advice!

    DB:2.93:Creative Cloud Installation Error 87 x8


    Which one worked. I am having the same problem.

  • RELEVANCY SCORE 2.93

    DB:2.93:Sims House Party, Setup Launches And Then Closes Immediately, Giving Me The Error 0x80040707 - Dll Call Function Crashed Isrt.Pathgetspecialfolder. a8


    original title: Error number: 0x80040707
    When I try to install the Sims House Party, setup launches and then closes immediately, giving me the error "0x80040707 - DLL call function crashed: ISRT.PathGetSpecialFolder.

    According to the Windows 7 compatility center, House Party is compatible under 64bit and 32bit Windows 7. I've tried installing it on another computer running Windows 7 32 bit and the error does not occur.

    I'm running Windows 7 Professional 64bit.

    DB:2.93:Sims House Party, Setup Launches And Then Closes Immediately, Giving Me The Error 0x80040707 - Dll Call Function Crashed Isrt.Pathgetspecialfolder. a8

    Seems like method 1 solved my problem. Normally I would get this message several times a day. It has been over 3 hours since I applied method 1, and the error has not popped up again. Thanks much.

  • RELEVANCY SCORE 2.93

    DB:2.93:Codeword Error Rate Is High 78


    This is another new-to-me message from my Terayon T715x:

    Codeword Error Rate is high (75157.0e-7).

    This is very intermittent. Is it anything to worry about? Or is this within normal error rates?

    DB:2.93:Codeword Error Rate Is High 78

    This is another new-to-me message from my Terayon T715x:

    Codeword Error Rate is high (75157.0e-7).

    This is very intermittent. Is it anything to worry about? Or is this within normal error rates?

  • RELEVANCY SCORE 2.92

    DB:2.92:Error 517 1j



    I am using Windows 7 and Google Chrome. I've uninstalled and re-installed adobe flash player numerous times and I continue to receive the same error of 517. I tried disabling and enabling the plug-ins and the error still occurs. Is there another solution to fix error 17?

    DB:2.92:Error 517 1j


    I cannot watch Gotham or any other Fox shows.

  • RELEVANCY SCORE 2.92

    DB:2.92:Unable To Perform Monthly Back Up. Get Error Message 0x80070020. 1s



    1. HP G62 Notebook

    2. Windows 7 64-bit

    3. Error Message "The process cannot access the file because it is being used by another process".

    4. No changes.

    DB:2.92:Unable To Perform Monthly Back Up. Get Error Message 0x80070020. 1s


    1. HP G62 Notebook

    2. Windows 7 64-bit

    3. Error Message "The process cannot access the file because it is being used by another process".

    4. No changes.

  • RELEVANCY SCORE 2.92

    DB:2.92:Error Another Version Of Outlook Is Currently Running. Close It And Try Again xm


    This error occurs whenever a reminder pops up. sometimes when I click on another email address. Freezes outlook.

    Windows 7
    Office 2010
    Outlook 2007

  • RELEVANCY SCORE 2.91

    DB:2.91:Error 0x80071a90 While Installing Windows 7 Service Pack 11


    I continue try to install Windows 7 service pack, but another error messages display.

    DB:2.91:Error 0x80071a90 While Installing Windows 7 Service Pack 11


    I then dowlonaded Microsoft Update standalone Package then i get error0X8007000d.

  • RELEVANCY SCORE 2.91

    DB:2.91:Disc Check Error 766f6c756d652e63 3f1 And Another Problem 9p



    At every start up. My computer tries to run a disc check and I get the error766f6c756d652e63 3f1 due to recent software installation on my hard disc Windows 7 and I should run a system restore.

    DB:2.91:Disc Check Error 766f6c756d652e63 3f1 And Another Problem 9p

    Hello Kevin and thank you for helping, but as I stated in my post. I have another problem, and it is preventing me from using the windows 7 repair feature on the disc to fix the error and I have run a a chkdsk in command promt as admin and all it does
    is work in READ MODE and sees the problem but wont fix it.
    Also again Every time I have tried to use the windows 7 repair feature on the disc. The mouse point never shows on the screen at that time. Which prevents me from continuing from the start of the repair.
    I have tried 3 different mice and yet the point still doesn't show and I am still stuck with the error.
    I do not know if they are related and I tried to fix this as well to no avail, but the is the error associated with system restore I am getting as well. (0x80071a91)

    Both of these error showed up at the same time. My system is getting sluggish and I am starting to worry and I have no way to back up anything.

  • RELEVANCY SCORE 2.90

    DB:2.90:Rip Cd Problem Windows 7 8p


    I rippede some cd`s using WMP.I inserted another cd and error message came up where status is shown.I tried a previously ripped cd and error message came up.There is no rip cd tab showing on the toolbar now.

    DB:2.90:Rip Cd Problem Windows 7 8p

    Hi,
    1. What is the exact and complete error message you get?
    2. Which security software is installed?
    3. Did you make any changes to the computer prior to this issue?

    I would suggest you to refer to these articles and check if this helps.
    Rip music from a CD: http://windows.microsoft.com/en-in/windows7/rip-music-from-a-cd
    Rip music: frequently asked questions: http://windows.microsoft.com/en-in/windows7/rip-music-frequently-asked-questions

    Windows Media Player frequently asked questions:
    http://windows.microsoft.com/en-in/windows7/windows-media-player-frequently-asked-questions
    Let us know if you need help with this issue, we will be glad to offer our assistance.

  • RELEVANCY SCORE 2.90

    DB:2.90:Outlook Client Error When Emailing From Another Program z7


    I am currently using Outlook 2010 and Windows 7 64 bit. Every timeI try to email from a another program even Adobe I get an error telling me to create an Outlook client or use Firefox, Windows live, etc. This is killing my productivity.
    Advice please.

    DB:2.90:Outlook Client Error When Emailing From Another Program z7


    Sorry, but you have posted your question in a forum that talk about Microsoft Operations Framework (MOF), then I am moving your post
    to another forum and I hope you can get some help. But if you want you can try to find other forum by yourself:

    http://social.technet.microsoft.com/Forums/en-US/

    Hope that helps

    Regards,

    Cleber Marques
    Microsoft MVP MCT | Charter Member: SCVMM MDOP
    MOF Brazil Project: Simplifying IT Service Management
    My
    Blog |
    MOF.com.br
    | CleberMarques.com
    | CanalSystemCenter.com.br

  • RELEVANCY SCORE 2.90

    DB:2.90:Cannot Change A Windows7 Password From Another Windows7 Pc. a1


    I need to be able to remotely change the password on a Windows 7 PC from another Windows 7 PC. When I attempt to do this, I get Access Denied error. I have both PC's on the same subnet while debugging but still getting the access
    denied error. Is there a security setting that needs to be changed to allow this?

    DB:2.90:Cannot Change A Windows7 Password From Another Windows7 Pc. a1

    Hi,
    I'm afraid that it's not possible, this can only be performed in a domain, if you want to remotly changethe password, please use RDP or remote control commandlike PSPassword I mentioned in my first reply.Yolanda Zhu
    TechNet Community Support

  • RELEVANCY SCORE 2.90

    DB:2.90:Bluetooth Not Working In Htc 7 Pro Windows Phone 7 sd


    Hello sir,

    Bluetooth not workingof my HTC 7 pro phone,,when i trying to send too another device that time one error show not support

    DB:2.90:Bluetooth Not Working In Htc 7 Pro Windows Phone 7 sd

    Can u tell me how much take time for bluetooth..u know bluetooth is very important feathers in mobile if its is not working i think no one think about window phone.

  • RELEVANCY SCORE 2.90

    DB:2.90:Installing Windows 7 Pro On A System With Windows 8 Pre-Installed (Error : Gpt Patition Style) f1


    Hi,
    I want to install Win 7 in another directory of system with win 8 but the error is prompting while installing win 7 windows cannot be installed on this
    disk. The selected disk is of the GPT partition style. And I don’t want to uninstall windows 8.
    What can I do to install windows 7 in another partition without uninstall windows 8?

    DB:2.90:Installing Windows 7 Pro On A System With Windows 8 Pre-Installed (Error : Gpt Patition Style) f1

    You could install virtualization software (like VMware and others) in Windows 8 and install Windows 7 inside VM.
    As A.Ziegler already posted native booting on GPT/UEFI is possible only with Windows 7 64-bit version.

  • RELEVANCY SCORE 2.89

    DB:2.89:Windows 7 Update - Error Codes 800700d And 80243004 d7



    Hi,
    I purchased Windows 7 some while ago, but didnt install it before now. The installation went well, but when i run update for windows 7, there is one left (for x64-based systems (KB974431)), and i get error code 8007000D on that.
    I searched the forums for the error and found one solution - run msconfig.exe and check services which in my case was only AVG internet security, and now i got error 80243004.
    Any suggestions that wouldnt cause another error, please? :)
    Martin

    DB:2.89:Windows 7 Update - Error Codes 800700d And 80243004 d7

    Thank you. This (and Caste-cates's post above) are the sort of replies that are useful in working around the mind-bogglingly unstable and unpredictable behavior of Windows Update.

  • RELEVANCY SCORE 2.89

    DB:2.89:Debuging Error In Adobeflex Builder (Windows-7) 18



    Here is an Error for me in AdobeFlex Builder 3

    My Operating System is Windows-7,Presntly FlashPlayer 10 is running in MySystem,but while debuging in Flex this Error was Coming

    Except this Debug Problem FlexBuilder works fine in Windows-7

    How to Solve this Problem ?...

    in Windows-Xp the debugging works fine but only in Windows-7 it's not working for AdobeFlex.....

    after that i Installed FlashPlayer 9 then another Error cames as below...but Debugging not working...

    plz any body give the solutin for this Problem

  • RELEVANCY SCORE 2.89

    DB:2.89:Another Code 7 Victim. Pretty Bad Comcast. 19



    On demand has always worked fine but a few weeks ago we started getting error 7 on both our HD boxes when we try to access on deman. Tried the reboots but still get error 7. From the looks of the forums this isn't an unusual problem.

    Is Comcast actually doing anything to resolve the issue??

    DB:2.89:Another Code 7 Victim. Pretty Bad Comcast. 19


    Finally got the upstairs box to work with On Demand. Not sure if it will stay on but it's on now. Downstairs box is still out.

  • RELEVANCY SCORE 2.89

    DB:2.89:Error 7 Windows Error 126 ac


    Error 7 windows error 126

  • RELEVANCY SCORE 2.89

    DB:2.89:Error Message Windows Does Not Support This Cd-R Format. Please Try Another Disc. za


    I am trying to burn another session to a CD-R using the built in burner in Windows 7. I am getting this error: Windows does not support this CD-R format. Please try another disc.
    The first session was burnt on another computer. I've tried to burn another session on a differentcomputer and it works fine but when I put it in the window 7 machine I can't burn a second session. Well some of the Windows 7 machines allow me to burn
    a second session but other wont?

    DB:2.89:Error Message Windows Does Not Support This Cd-R Format. Please Try Another Disc. za

    Hi RickJB,

    Try the below methods:

    1.Run the troubleshooter:
    Open the Playing and Burning CDs, DVDs, and Blu‑ray Discs troubleshooter:
    http://windows.microsoft.com/en-us/windows7/Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter

    2.Uninstall any third party DVD/CD burning software installed on your computer and then burn and check if that helps.

    Regards:
    Samhrutha G S - Microsoft Support.
    Visit ourMicrosoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.89

    DB:2.89:Windows 7 Activation Error 0xc004c008 With One Pc Tying Up 2 Keys. 9f


    Can change between the 2 keys with one PC, but cannot use either key for another machine

    DB:2.89:Windows 7 Activation Error 0xc004c008 With One Pc Tying Up 2 Keys. 9f

    Activate Windows 7 manually:
    1. Click Start, and in the Search box type : slui.exe 4

    2. Press ENTER on your Keyboard

    3. Select your Country.
    4. Select the Phone Activation option, and hold on for a real person.

    Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  • RELEVANCY SCORE 2.89

    DB:2.89:Problem In Install Vs2010 d9


    hi
    when i'll install v.s 2010 on win 7 i meet error and when try another dvd again meet error
    please help me
    thanks

    DB:2.89:Problem In Install Vs2010 d9

    Hi,
    such a questions should go to the Visual Studio Setup and Installation forum instead of this forum. This forom only covers the developer documentation itself and the ms help system. So I would recommend to ask again inside here:

    http://social.msdn.microsoft.com/Forums/en-US/vssetup/threads
    And please be aware, that nobody might be able to help you if you do not give any details. What error do you get when? What exactly did you try?
    With kind regards,
    Konrad

  • RELEVANCY SCORE 2.89

    DB:2.89:How To Solve Cannot Connect Socket Error 10060 Windows 7 d7



    I have a clean installation of windows 7 professional and I am trying to setup webcam 7. When I try to setup Email Notifications I get Cannot Connect : Error # 10060 Connection timed out. Does anyone know how to solve this? I have tried installing Webcam
    7 in another computer with Windows 7 and the email notification works fine. I have installed Visual C++ 2008, 2010 and 2012 Redistributable and no luck so far.

    DB:2.89:How To Solve Cannot Connect Socket Error 10060 Windows 7 d7

    Hello,

    Thank you for posting in Microsoft Community. We will be happy to help you.

    I would like to know:
    1) How areyou trying to access emails? Are you using a email client for example windows live mail or Microsoft office outlook or using a web browser?
    2) Who is the email service provider?
    3) What is the make and model of the webcam which you are trying to set up?
    4) What is the error you get when trying to setup a webcam?

    10060 is a connection-timeout error that usually appears when the client does not receive a response from the server for a specific command. This error often occurs when you try to connect in PASV mode to a server that prefers PORT for data connections.
    It seems to be issue withit is a SMTP. Please check withyour service provider as well.

    For fixing the issue I would recommend you to follow to steps given below:
    1. On the Windows task bar, click Start Run. The Run dialog box appears.
    2. In the Run box, type cmd, then click OK. The Windows Command Prompt appears.
    3. At the prompt, type the command and then the IP address or domain name of the server to which you are trying to connect.

    For example: ping bing.com
    Now hit enter.

    After this check and let us know.

    Thank you

  • RELEVANCY SCORE 2.89

    DB:2.89:Ht1926 When I Launch I-Tunes I Get An Error Message dj


    When I launch I-Tunes I get an error message saying that it can't run because msvcr80.dll is missing and then another error message saying that I have an error 7 (Windows Error 126). I tried uninstalling I-Tunes and re-installing but it did not fix it.Has anyone else experienced this error? And what can I do to Fix it.

  • RELEVANCY SCORE 2.89

    DB:2.89:Printer Error In Windows 7 When I Try To Print From Explorer zd


    I get a printer error in windows 7: when I try to print from explorer I get an error with URL: res://ieframe.dll/preview.js.

    Can't seem to get to Start-- run -- etc... to run: "res://ieframe.dll/preview.js" . Is there another way to fix this?

    thanks.
    HC

    DB:2.89:Printer Error In Windows 7 When I Try To Print From Explorer zd

    I get a printer error in windows 7: when I try to print from explorer I get an error with URL: res://ieframe.dll/preview.js.

    Hi,
    Download, unzip and run the script ie8-rereg.zip from
    http://iefaq.info/index.php?action=artikelcat=42id=133artlang=en

    Don

  • RELEVANCY SCORE 2.89

    DB:2.89:Error Windows 7 Logonui Usernit ps


    i just fixed a start-up error now there's another error Logonui usernit [...]
    title revised,extraneous content removed by moderator

    DB:2.89:Error Windows 7 Logonui Usernit ps

    Your PC maker has provided a means of reinstalling the entire system [possibly using a repair partition]. You will need to use the Windows 7 Product Key [which is likely to be on the casing of the PC or inside the battery compartment].

    Provided that you do have that Product Key you could create, then reinstall using, a Windows 7 Installation DVD/USB:-

    Requirements
    -1 Another Windows 7 / Vista / XP-SP2* PC on which you can use an admin-level account
    [* XP requires additional components- see para 1.1 below]
    AND EITHER
    - 2 Blank (re)writeable DVD
    OR
    - 3 4GB USB
    Hazards
    - 1 This recovery method will result in the loss of all user files all installed applications and it may also remove all disk partitions.

    Links to essential external procedures that must be followed during this recovery method
    - 1 Installing and reinstalling Windows 7
    Links to advisory documents worth reviewing before starting this recovery method
    - 1 Windows Help
    - 2 PC manual

    Procedure
    1 To make an installation DVD or USB:
    1.1 Download the correct ISO file [see para 1.2 below] fromOfficial
    Windows 7 SP1 ISO from Digital River and the
    Windows 7 USB-DVD download tool
    The download tool can run on Windows 7, Vista XP SP2 but XP users need additional components that are listed, linked to, on the download page.
    1.2 You can only run a successful installation of the version of Windows [Home Premium so on] that is identified on your Certificate of Authenticity [CoA].
    The PC manual also needs to be checked as, if the PC is only specified as being capable of running 32 bit Windows 7 [“x86” but often referred to as x32], then only a 32 bit [x86] installation will succeed.
    If the PC is specified as being capable of running 64 bit Windows 7 [“x64”] then a x64 installation would normally be chosen.
    If you have any access to the system at all at this stage, then you can check the current version at Control panel, [set it to View by - large or small icons rather than Categories], System - see the entry at the top for the version the entry lower
    down at System type for 64 bit or 32 bit. Your Windows 7 CoA Product Key is valid for 32 bit 64 bit versions so you can choose which one to install.
    Your Windows 7 CoA Product Key is valid for SP1 even if you have not yet installed that update.
    1.3 On another PC, using an admin-level account, install the USB-DVD Download Tool then run it with the ISO file stored anywhere on the system [except the target DVD / USB drive, I discovered, although others say that it can be on the
    target drive]. The result is a Windows 7 SP1 installation DVD / USB.
    The USB-DVD Download Tool can then be ignored or it can be uninstalled.
    2 To install Windows 7:
    2.1 Insert the Windows installation disk, (re)start the system.
    As soon as the PC maker’s logo appears, set the system to boot from the DVD / USB drive as appropriate by pressing repeatedly on the
    Boot options key or the BIOS key identified onscreen at this point [or identified in the PC manual].

    2.2 After several minutes [that can include periods with a blank screen no apparent activity], wait during the “Starting Windows” screen then, at the first
    Install Windows dialog, select the language the time-currency format the keyboard.
    Then click Next.

    2.3 At the next Install Windows dialog, select Install now.

    2.4 Onscreen instructions will then guide you through the installation procedure.
    There is more detailed guidance at Installing and reinstalling Windows 7.
    2.5 At the end of the reinstallation, you may or may not have to activate Windows 7.
    If you are reinstalling the version preinstalled by the PC maker then they might have provided for a self-activation process that you will not even notice.
    If you have any doubts then you can go to Genuine Microsoft Software Validation afterwards to validate the activation / self-activation
    if you wish.

  • RELEVANCY SCORE 2.89

    DB:2.89:Windows 7 Is Not Passing Secondary/Additional Credentials To Sql Server 2008 Database On Another Domain. 3a


    Windows 7 is not passing secondary/additional credentials to databases on another domain.

    This error I am gettingwhen using SQL Server Management Studio or when using Visual Studio 2008 and Im trying to connect to another server/database
    across another domain using Windows authentication:

    Login Failed. The login is from an untrusted domain and cannot be used with windows authentication. (Microsoft SQL Server, Error: 18452)

    DB:2.89:Windows 7 Is Not Passing Secondary/Additional Credentials To Sql Server 2008 Database On Another Domain. 3a

    Hi,
    Could you please provide more detail? The error message indicates that you try to access SQL Server from an untrusted domain using Windows Authentication. You can refer to the following link to fix the issue:
    http://arjunachith.blogspot.com/2010/05/failed-login-is-from-untrusted-domain.htmlPlease remember to mark the replies as answers if they help and unmark them if they provide no help.

    Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.

  • RELEVANCY SCORE 2.89

    DB:2.89:Ps Vita Error Code C2-15948-7 ks



    plz help ive been trying to connect my ps vita to ps4 and i keep getting error code c2-15948-7 or ps4 is already connected to another device it is not connected to another device as i have only just bought it i want to use my vita as remote play device. any help will be greatly appreciated thanx







    Solved!
    Go to solution

  • RELEVANCY SCORE 2.89

    DB:2.89:Itunes Error fx


    when I try to load itunes it comes up with an error message telling me it wont nt start because WebKitQuartzCoreAdditions.dll is missing from your computer after getting rid of this message another one pops up telling me itunes was not installed correctly help me and shows the error 7 alert please help me

    DB:2.89:Itunes Error fx

    ive tried that multiple times and i still get the same message

  • RELEVANCY SCORE 2.89

    DB:2.89:Windows 7 - Task Scheduler Has Error Messages On Start. The Selected Task 0 No Longer Exists. When I Display Running Tasks Another Error ... mz


    Windows 7 - Task
    Scheduler has error messages on start. The selected task 0 no longer exists. When I display running
    tasks another error ...

    DB:2.89:Windows 7 - Task Scheduler Has Error Messages On Start. The Selected Task 0 No Longer Exists. When I Display Running Tasks Another Error ... mz

    Hi john,
    Could you please have a share with the full error messages here?
    Based on the information you shared, please check if the following article would help you to resolve the issue:
    Error message 'The selected task {0} no longer exists. To see the current
    tasks, click Refresh’(TechNet blog)
    A similar thread:
    Task Scheduler (Win7) error message
    If any further help needed, please feel free to post back.
    Best regardsMichael Shao
    TechNet Community Support

  • RELEVANCY SCORE 2.88

    DB:2.88:Windows Error When Running Link For Other Application a1



    When FF is not running and I click on a link in another application there is a error reported but FF loads and goes to the link. Example Outlook email link results in a Windows General failure error message.
    Run Windows 7 sp1

    DB:2.88:Windows Error When Running Link For Other Application a1


    When FF is not running and I click on a link in another application there is a error reported but FF loads and goes to the link. Example Outlook email link results in a Windows General failure error message.
    Run Windows 7 sp1

  • RELEVANCY SCORE 2.88

    DB:2.88:Error Id= -54 kp


    Illustrator cs5, windows 7, read only problem error -54 can't save the illustration. the file may be read-only, or the file is in use by another application, or you do not have required permissions.all new or old file showing same error ... n only when work illustrator file ....not other filePlz help

    DB:2.88:Error Id= -54 kp

    I have the same problem in Illustrator CC on my laptop. Saving a copy is a solution, but it is still annoying

  • RELEVANCY SCORE 2.88

    DB:2.88:Another Vc037 Error 7p



    Whenever I try and view live sport on any of the three channels, after about 30 seconds of watching the spinning circle I get an error pops up "Access not allowed to the provided stream URL" And the error code given is VC037.This is on an Android Google Nexus 7 running Android 4.2.2

    I can watch other clips within the app no problem and I can watch live sport on an iPad and on a Windows 7 PC. I've looked on the usual error code page but VC037 doesn't appear.Thanks in anticipation.

    DB:2.88:Another Vc037 Error 7p


    I was beginning to think I was the only one.

    VC037

  • RELEVANCY SCORE 2.88

    DB:2.88:Pe12 Will Not Open aj


    Error message states the catalog cannot be opened beacuse it is currently in use by another program. Using Windows 7.

    DB:2.88:Pe12 Will Not Open aj

    Error message states the catalog cannot be opened beacuse it is currently in use by another program. Using Windows 7.

  • RELEVANCY SCORE 2.88

    DB:2.88:\Device\Cdrom0, Has A Bad Block Error Trying To Install Office 2007 Ent On Win7 ss


    Anybody see this error, the DVD works in another PC I have, the DVD drive that spits this error works for music movies etc. Any ideas, HP Pavilion DV-7 WIN7 Pro

    DB:2.88:\Device\Cdrom0, Has A Bad Block Error Trying To Install Office 2007 Ent On Win7 ss

    I was able to install by sharing my DVD drive from another computer, thanks for your input. Issue I have with HP is they pointed a finger at Microsoft, our drive plays movies so there for its a Microsft issue when clearly it is some compatibility issue with their drive as the DVD boots the installer in many PC's. They also claimed that it works in some of those due to Office already being installed, well guess what NOT! It still chokes on my brand new DV-7 netbook that has Office 2007 installed on it.I feel better now, thanks

  • RELEVANCY SCORE 2.88

    DB:2.88:Long Delay In Finding Wireless After Sleep... 9x


    Often up to two minutes. I am running a late 2008 MacBook and have an Airport Express. Other devices (old PowerBook and iPhone) find network immediately. The system log is giving the following error.

    7/11/09 12:15:07 PM airportd[6686] Error: Apple80211Scan() failed: Resource busy (16)
    7/11/09 12:15:07 PM airportd[6686] No networks found on channels remembered for B's Network
    7/11/09 12:15:07 PM airportd[6686] Could not find "B's Network"
    7/11/09 12:15:07 PM airportd[6686] Error: Apple80211Scan() error 16

    7/11/09 12:15:35 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:36 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:36 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:37 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:37 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:38 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:38 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:39 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:39 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:40 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:40 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:41 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:41 PM SystemUIServer[3794] Error: __performScan() failed (16)
    7/11/09 12:15:48 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    7/11/09 12:15:48 PM SystemUIServer[3794] Error: __performScan() EBUSY, try again in a sec
    7/11/09 12:15:49 PM SystemUIServer[3794] Error: Apple80211Scan() error 16

    This continues for at least another two minutes or so, until resolving with:

    7/11/09 12:17:24 PM com.apple.launchd[1] (com.apple.backupd-wake[6690]) Exited with exit code: 1
    7/11/09 12:17:24 PM com.apple.launchd[1] (com.apple.backupd-wake[6690]) Exited with exit code: 1
    7/11/09 12:18:13 PM ntpd[14] time reset -0.184324 s
    7/11/09 12:18:13 PM ntpd[14] time reset -0.184324 s

    DB:2.88:Long Delay In Finding Wireless After Sleep... 9x

    Do you have any update on this probem? I'm getting the same issue today... MBP 13 with 10.5.7.... Don't even know how to donwgrade, since my install disk is already 10.5.7....

  • RELEVANCY SCORE 2.88

    DB:2.88:Blackberry Not Installing On Windows 7 - Error Code 10 f1


    Original Title: my mtp is not installng error code 10
    when iam connecting my bb to my pc it was not installing showing error code 10.mean while when it was connected to another pc it was installing.please check out this problem

    DB:2.88:Blackberry Not Installing On Windows 7 - Error Code 10 f1

    Try removing the battery from the Blackberry, reboot it then attempt connection again.

    Did you install the latest version of the Blackberry Desktop software for Windows?
    Install first, restart your computer then connect the device.
    You might also want to try connecting it to a different USB port on the system.
    BlackBerry -
    Desktop Software for PC

  • RELEVANCY SCORE 2.88

    DB:2.88:Error No Item Exists At Http://... It May Have Been Deleted Or Renamed By Another User zf


    Does anybody know how to replace the ugly default exception pagefor this error whenan item(here with id=7) has been removed by another user?
    No item exists at http://myserver/Lists/mylist/DispForm.aspx?id=7. It may have been deleted or renamed by another user
    Thanks,
    Leszek

    Website: www.wisenheimerbrainstorm.com

    DB:2.88:Error No Item Exists At Http://... It May Have Been Deleted Or Renamed By Another User zf

    Try this link
    http://www.spdeveloper.co.in/articles/pages/custom-error-pages-for-sharepoint2010-sites.aspx
    I have developed the custom error page for one of my project using the above snippet.Murugesa Pandian.,MCTS|App.Devleopment|Configure

  • RELEVANCY SCORE 2.88

    DB:2.88:Fail To Activate Windows 7 Rc fp


    I still got this error error code : 0x80072F8F while trying to activate my windows 7 RC that I downloaded from official site. I had got and try another product key from official site, but the problem still there.

    DB:2.88:Fail To Activate Windows 7 Rc fp

    btw - that 2nd to last link crashes my IE8 installation every time.  A fine example, that.Here, let's try it again:http://www.google.com/search?hl=ensource=hpq=80072F8Faq=foq=aqi=
    So another words your telling me the clock was set for Napal intead of New Guinea? 

  • RELEVANCY SCORE 2.88

    DB:2.88:Unity 7 Dirt Backup To Another Domain 1p



    Hello,

    I'm running Unity 7 in a VM only configuration with on box AD and Exchange.   I want to schedule regular DIRT backups to a storage server in another domain.   The problem I have is that DIRT will not allow me to put in credentials from another domain.   I get an error that it cannot validate the account.   Anyone know how I can get around this without creating a trust between the domains?

    Thanks,

    Glenn

    DB:2.88:Unity 7 Dirt Backup To Another Domain 1p


    Thanks again for the info.

    I've found that you can workaround this by using a local account on the target backup server instead of a domain account.   As long as the usernames and passwords are the same on the Unity server and the backup server, this works just fine.

    Thanks,

    Glenn

  • RELEVANCY SCORE 2.88

    DB:2.88:Get Lv Class Default Value.Vi Error 7 Using Executable z8



    I'm generating a Word Document with an X-Y graph embedded. This works fine on my development machine. When I run the executable on another machine,I'm getting an error 7. I'm never generating the document because the "Get LV Class Default Value.vi" inside of the "New Report.vi" is generating the error.

    I don't know if this is a build error

    or

    a computer configuration error

    or

    a MS Word configuration error.

    Any help/clues/ideas would be appreciated.....

    DB:2.88:Get Lv Class Default Value.Vi Error 7 Using Executable z8


    The solution is found here....

    http://digital.ni.com/public.nsf/allkb/C38CE3F3054​2D65B86256F0E00740DD8

    Thanks to Heath Causey, NI TechRep in Huntsville, Alabama for the quick find.

  • RELEVANCY SCORE 2.87

    DB:2.87:Error 1935 Office 2010 Suite Upgrade s8


    On attempting to upgrade Office 2007 Pro to Office Pro Plus 2010 received error 1935. Setup then rolled back to 2007. Operating system is Windows 7 Pro 32 bit. A clean install to another computer worked fine.

    DB:2.87:Error 1935 Office 2010 Suite Upgrade s8

    One of the threads suggested downloading CCleaner which I did and then after running, I reattempted the 'Upgrade' install. This resulted in error 1935 again.
    I next downloaded the Office Pro Plus 2010 .exe file again. It showed the same date and file size as my original download.
    Using the fresh download I reattempted. Instead of taking the 'Upgrade' option, I took the 'Custom' option and changed nothing, which presumably gave the same choices as 'Upgrade'. When I returned two hours later the installation was complete!
    Take your choice as to whether it was the fresh download or using 'Custom' or random kindness of the CPU.
    Thanks for your suggestions!

  • RELEVANCY SCORE 2.87

    DB:2.87:Another Eroom Migration Issue ma


    The second problem is that I get this error while creating a eRoom 7 site:"Cannot create..........scheme files are corrupt"Please help

    DB:2.87:Another Eroom Migration Issue ma

    Are you using SQL as a Database Server?If so check that the Microsoft SQL Server must be installed with the following Microsoft defaults:- Character Set: 437 U.S. English- Sort Order: 1252 ISO character set, 52 nocase_iso Dictionary order, caseinsensitive.(Other sort orders like binary are not supported. To verify SQLServer sort order, from the MS SQL Query Analyzer run the SQL Statementsp_helpsort.)- Unicode Collation: 1033 General Unicode- Unicode Style: Case-InsensitiveTo check wether SQL is setup right, do the following:Go to SQL Query analyzer and run the two commands:sp_helpsortsp_server_infoThose commands give you an output of the current settings.The Problems most probably comes from a incorrect installed SQL Server. This schema files corrupt message is mostly caused by this.RegardsDominik

  • RELEVANCY SCORE 2.87

    DB:2.87:Bluetooth Windows 7 64 Bit (Was Re: Palm Tx Error Message (Sys 0505) (0,841) 81


    Merging this thread with another you previously started

  • RELEVANCY SCORE 2.87

    DB:2.87:Prompted To Update To Latest Version Of Itunes But It Comes Up With A Microsoft C&Nbsp;&Nbsp; Visual Error a3


    Prompted to update iTunes on my Laptop but it fails and comes up with a Microsoft C++ runtime error R6034 then another error window with iTunes error 7 (Windows error 1114

    DB:2.87:Prompted To Update To Latest Version Of Itunes But It Comes Up With A Microsoft C&Nbsp;&Nbsp; Visual Error a3

    Prompted to update iTunes on my Laptop but it fails and comes up with a Microsoft C++ runtime error R6034 then another error window with iTunes error 7 (Windows error 1114

  • RELEVANCY SCORE 2.87

    DB:2.87:Ifs&Amp; Wireless ac


    I would like get the ifs application running. We have the IFS (server) running on the url http://hostname:7777/files/app/

    When I go to the url above I get the SSO interface where I can log on using the administrator password. Here I can browse through my maps.

    Which url do I have to use in the wireless IFS application settings to get access to IFS. If I use the url above then I get the following error:

    milliseconds
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] at infra.ifs._jsp._IfsGetSession._jspService(_IfsGetSession.java:440)
    ERROR come to IfsGetSesion.jsp
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR WebDAVRequestGenerator::generatePropFind()
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR Command: allprop
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR Depth: one
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR error host in req is hostname
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR error port in req is 7777
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR WebDAVService::processResponse
    11-6-03 18:47:53 ERROR : [ApplicationServerThread-7] module.infra.webdav.WebDAVService.println(Unknown Source)
    ERROR DAV Interpreter:

    Is there another url that I can use for the wireless interface?

    I've also tried http://hostname:7777/files but I got the same error.

    Any help will be appreciated.

    Rgds Thomas

    DB:2.87:Ifs&Amp; Wireless ac

    the rest of the topic can be read @ the collaboration suite forum:

    configuration IFS with wireless IFS application

  • RELEVANCY SCORE 2.86

    DB:2.86:7/12: Error 4001 9k



    I'm getting the same error, and yes, I am using the play now.

    I also checked how many activated devices I am using as suggested in another thread. I'm only using 2 out of my 3 allowed at the moment.

    Still not sure why it gives me the 4001 error every time I try to play a show.

    DB:2.86:7/12: Error 4001 9k

    I'm trying to watch the latest episode of The Walking Dead on the xbox app and I keep getting error 4001 I'm on my home wifi and and have version 2.04

  • RELEVANCY SCORE 2.86

    DB:2.86:Error Settings.Ini. Is Being Used By Another Progress In Windows 7 j3


    After not installing YAHOO instant messenger, I reluctantly agreed to install it on my computer for my wife and now....

    DB:2.86:Error Settings.Ini. Is Being Used By Another Progress In Windows 7 j3

    Hi,
    I would suggest you to perform the following troubleshooting methods:
    Method 1:
    Set the computer to clean boot, and then check how it works.
    To set the computer in clean boot, follow the steps from the following link:
    How to perform a clean boot

    Note: After checking in clean boot, follow step: 7 from the article to reset the computer to normal boot.
    Method 2:
    If that doesn’t work, I would suggest you to perform System File Check to fix all the corrupted system files.
    Refer the following link to perform System File Check.
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
    Note: It may ask for windows DVD to fix and to enable SFC to make more than minor repairs. Some files saved on your computer might get deleted when fixing corrupted files.
    Method 3:
    If that doesn’t work, I would suggest you to perform system restore to the point when it was working fine.
    Refer the following ink to perform system restore.
    System Restore Win 7

  • RELEVANCY SCORE 2.86

    DB:2.86:Error Message Error Username And Password Do Not Match cx


    This message occurs the minute I open windows 7. It began when I accessed another computer on the network.

    DB:2.86:Error Message Error Username And Password Do Not Match cx

    Hi,
    1)What exactly does you mean when you say that “when I accessed another computer on the network”?
    2)Is your computer connected to a Domain network?
    3)Do you enter any credential to login to the Windows 7 computer?

  • RELEVANCY SCORE 2.86

    DB:2.86:Desktop Doctor pj


    Downloaded DD and an error message stated I needed IE 5.5 SP2 or higher.. I have IE 7!Is there another version for this IE version?

    DB:2.86:Desktop Doctor pj

    Thanks for the advice... I deleted the install file.. :-)

  • RELEVANCY SCORE 2.86

    DB:2.86:I Get This Error Code While Installing My Windows 7 Update - Error Code 80246008 . cc


    If i follow microsoft help steps for this error ie., clicking the Background Intelligent Transfer Service (BITS) - start .. it is showing another error that error 1068 : the dependancy service or group failed to start

    DB:2.86:I Get This Error Code While Installing My Windows 7 Update - Error Code 80246008 . cc

    ajaysundar,
    http://support.microsoft.com/kb/910337

    Error message after you install Antigen: "Error 1068: The dependency service or group failed to start
    http://support.microsoft.com/kb/905999/en-us

  • RELEVANCY SCORE 2.85

    DB:2.85:Quicktime 7 Os Status Error -50 When Opening A Movie. 9j


    Have reinstalled quicktime 7, think there's some conflict. Have tried rereinstalling, updating, copying application from another computer. But quicktime 7 just won't play anything! Think there's a file corrupted somewhere.... not sure where to check. any thoughts greatly appreciated.

    DB:2.85:Quicktime 7 Os Status Error -50 When Opening A Movie. 9j

    Have reinstalled quicktime 7, think there's some conflict. Have tried rereinstalling, updating, copying application from another computer. But quicktime 7 just won't play anything! Think there's a file corrupted somewhere.... not sure where to check. any thoughts greatly appreciated.

  • RELEVANCY SCORE 2.85

    DB:2.85:Windows 7 Upgrade 98


    I just installed windows 7 upgrade on a Gateway pc.I had an error saying checkdisk had to repair the error.Now when it boots up I get as far as set up installation services and then it gets another error saying the pc restarted unexpectidely and the computer
    needs to restart to complete the installation. Any suggestions how to fix this problem??

    DB:2.85:Windows 7 Upgrade 98

    CHKNTFS.EXE: Use the following program to disable CHKDSK
    http://support.microsoft.com/?kbid=160963#appliesto

    Credit Linney MPV

    Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

  • RELEVANCY SCORE 2.85

    DB:2.85:Ts1567 Newest Update To Itunes, 1/28/2014, Caused Problems On Windows 7.&Nbsp; Error 126...No Msvcr80.Dll And Another Error, Apsdaemon.Exe.&Nbsp; How To Fix? k1


    Newest update to iTunes, 1/28/2014, caused problems on WIndows 7. Error 126...no msvcr80.dll and another error, APSDaemon.exe. How to fix?

    DB:2.85:Ts1567 Newest Update To Itunes, 1/28/2014, Caused Problems On Windows 7.&Nbsp; Error 126...No Msvcr80.Dll And Another Error, Apsdaemon.Exe.&Nbsp; How To Fix? k1

    Newest update to iTunes, 1/28/2014, caused problems on WIndows 7. Error 126...no msvcr80.dll and another error, APSDaemon.exe. How to fix?

  • RELEVANCY SCORE 2.85

    DB:2.85:In Windows 7 Getting Error The Action Cant Be Completed Because The Folder Or A File In It Is Open In Another Program 8p


    I have had this problem with Windows Vista Professional, was advised it would be fixed in Windows 7, have now installed windows 7 and problem still exists.

    DB:2.85:In Windows 7 Getting Error The Action Cant Be Completed Because The Folder Or A File In It Is Open In Another Program 8p

    I take that back. After I restarted win explorer it did delete the folder.
    deleting the recycle bin does work.......................

  • RELEVANCY SCORE 2.85

    DB:2.85:Windowsupdate_80246007 Error dx


    What is this and PLEASE tell me how to fix it coomes up with another error WindowsUpdate_80070002 at the same time and does let me download updates.
    System runnimg : Windows 7 home premium with sp 1

    DB:2.85:Windowsupdate_80246007 Error dx

    Hi Steven,

    We apologize for the inconvenience. I would suggest you to place the computer in a
    clean boot to check if any third party application is causing the issue, as clean boot helps in eliminating software conflicts.

    Note: After troubleshooting, see the section “Reset the computer to start as usual” to return the computer to a
    Normal startup mode.

    Hope it helps.

  • RELEVANCY SCORE 2.85

    DB:2.85:Thread: Can't Move Resources From 6.5 To 7 77


    I have an old GroupWise 6.5 server. I have about 8 resources. We are

    moving all users to a new servers that is GroupWise 7. I am getting the

    users moved finally. But now I need to move some resources. Everytime I

    try, I get the error:

    A move error occured.An error occurred modifying an attribute value.

    Modifying unsafe record (0xDB03)

    I immediatly undo the move. But I have tried from several resources. It

    works fine from another GW 7 PO. Are moves incompatible with GW6.5 and 7?

    Thanks,

    John Jakus

    DB:2.85:Thread: Can't Move Resources From 6.5 To 7 77

    I\'ve encountered issues moving from 6.5 to 7 as well, with similar concerns

    about my 6.5 server. It\'s not so much the database as the hardware in my

    case, though. It seems that I can move some users to 7, but at some point

    the 7 Domain database corrupts and moves get stuck in limbo. I\'ve opened an

    incident with Novell, but I\'m about ready to demand a new engineer. It\'s

    pretty bad when you pay your $650 and can\'t get a response to email....

    Neal

    John Jakus John.Jakus@*diespammerdie*Valence.com wrote in message

    news:fRuIf.1818$wT2.371@prv-forum2.provo.novell.com...

    I have an old GroupWise 6.5 server. I have about 8 resources. We are

    moving all users to a new servers that is GroupWise 7. I am getting the

    users moved finally. But now I need to move some resources. Everytime I

    try, I get the error:

    A move error occured.An error occurred modifying an attribute value.

    Modifying unsafe record (0xDB03)

    I immediatly undo the move. But I have tried from several resources. It

    works fine from another GW 7 PO. Are moves incompatible with GW6.5 and 7?

    Thanks,

    John Jakus

  • RELEVANCY SCORE 2.85

    DB:2.85:Windows 7 Create System Image Error Another Copy Running 7j


    I have been trying to create a system image, but have be unable to since early December. Am being told cannot create shodow copy - another version running, please wait a few minutes and try again; or something very close to this. I am backing up to a
    Seagate 1TB portable and have tried different portable disks. I am running Windows 7 Profession, fully up to date, and, to the best of my knowledge, I am NOT running another backup.

    DB:2.85:Windows 7 Create System Image Error Another Copy Running 7j

    Hi,

    Thank you for choosing Microsoft Community Forum.

    Did you make any changes on the computer prior to the issue? Which antivirus is installed on the computer?
    You may be getting this error message as result of some services being disabled or not working properly, and some windows files corruption. I would suggest to try following methods and check if that helps. You must be logged on as an administrator to perform
    these methods:

    Refer to article below to know how to logon as an administrator.

    How do I log on as an administrator?
    http://windows.microsoft.com/en-US/Windows7/How-do-I-log-on-as-an-administrator

    Method 1: Check whether Volume Shadow Copy Service, Windows Backup service also stop and restartthe respective services.

    Click on start Type Services.msc in search box and open it. Make sure that the Volume Shadow Copyand Windows Backup Serviceis
    Running and set on Automatic. If the Status of System Restore Service is not Started, Start it. Also set it on Automatic if it is not.If the status is started, then sttop and restartthe services. Restart the computer and check.
    Method 2:
    I suggest that you disable the Antivirus temporarily and then check for the issue.

  • RELEVANCY SCORE 2.85

    DB:2.85:Error Code - Windows Is Not Genuine dx


    This computer was installed with windows 7. Something happended and i had to reset Windows 7 from a disk i had from another computer. How was i going to re-instal windows without the disc. no im getting an error saying my windows is not genuine. What do
    i do?

    original title: error code

    DB:2.85:Error Code - Windows Is Not Genuine dx

    Assuming you purchased a PC with Win7 preinstalled, that PC maker must have supplied you with a means of recovery, either by way of Recovery disks or a hidden partition with which you were supposed to make the recovery disks
    Using a disk supplied for another PC is unlikely to work, which has allways been the case, at least since win 2000

  • RELEVANCY SCORE 2.84

    DB:2.84:Windows 7 Failure To Install Error Code 80070570. ff


    I am running Windows 7 and since last night I have been trying to download an Update that says it's Windows 7 x64 Service Pack 1 but everytime I attempt it I keep getting a Failure to Install Error Code 80070570. I ran the Trouble Shooter on Windows Updater
    and it said the problem(s) were fixed and to try again. Only when I do try again it results in yet another Failure to Install Error Code 80070570. What do I do???

    DB:2.84:Windows 7 Failure To Install Error Code 80070570. ff


    [HRESULT = 0x80070570 - ERROR_FILE_CORRUPT]

    Before running WindowsUpdate, please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

    sfc.exe /scannow

    Is it able to find and repair broken files? If not, run the System Update Readiness Tool [3].

    [1]
    http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token

    [2] http://support.microsoft.com/kb/929833

    [3] http://support.microsoft.com/kb/947821

    `~`
    03/19/1110:54:26 am

  • RELEVANCY SCORE 2.84

    DB:2.84:Listner And Enterprise Manager Error kz


    TNS-12560: TNS:protocol adapter error
    i m unable to start my listner. i m using oracle 11g on windows 7

    another error is of enterprise manager

    their is something like falling back to standard locale ("c")

    em configration isses c:\app\manish\product\11.2.0\db_home_1\manish-pc_orcl not found

    DB:2.84:Listner And Enterprise Manager Error kz

    your question:
    CLASSIC Windows error due to any number of OS/Networking mis-configurations

    are both OS Services for database listener started running?
    when was last time all worked with out error?
    what changed since then?

    Does system get is IP# via DHCP?

    yes os services and listner are both running
    error is from the begning

  • RELEVANCY SCORE 2.84

    DB:2.84:Error 7 ma



    What is error 7?

    DB:2.84:Error 7 ma


    Error 7 means the cable box doesn't have a IP address causing On Demand not to work. Sometimes a power cycle of the box will grab a new IP address. It can also be signal issues to the box or even an account code issue.

    Unplug the box for two minutes, then power it up and test in 15 minutes. If it still has a error 7, then please contact Comcast support as they will need to decide on the next steps to take.

  • RELEVANCY SCORE 2.84

    DB:2.84:Another Windows 7 Error 7d



    I just upgraded to windows 7 and now skype refuses to work.

    After logging in I get the "skype has stopped working" error window with below details:

    Problem signature: Problem Event Name: APPCRASH Application Name: Skype.exe Application Version: 6.14.0.104 Application Timestamp: 52f90e3e Fault Module Name: Skype.exe Fault Module Version: 6.14.0.104 Fault Module Timestamp: 52f90e3e Exception Code: c0000005 Exception Offset: 00cb01bb OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 3081 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

    Please help!

    thanks.







    Solved!
    Go to Solution.

    DB:2.84:Another Windows 7 Error 7d


    it is working now - thanks very much for your help!

  • RELEVANCY SCORE 2.84

    DB:2.84:I Am Getting Error Code 0x80070422 8j


    I tried to run the WIN 7 online scanner as recommended in another post, but it didn't work and I got error code 0x0C600C03...any ideas?

    I cannot start or access any firewall functions...thanks!

    DB:2.84:I Am Getting Error Code 0x80070422 8j

    Hi c2pilot,
    In order to troubleshoot the issue better, please provide more information.
    1. How long have you been experiencing this problem?
    2. Have you recently installed or uninstalled any software or hardware?

    3. When exactly do you get ‘0x80070422’ error message?
    4. Which online scanner did you run?
    5. What happens when you access any firewall functions?
    I would suggest you to come back with more information in order to troubleshoot the issue better.
    You may refer the below mentioned link for error ‘0x80070422’.
    http://social.answers.microsoft.com/Forums/en-US/w7security/thread/e5ee6823-98f8-4575-a254-00a038b17e34

    http://social.technet.microsoft.com/Forums/en-US/w7itprosecurity/thread/d6060a49-7dbb-4dd4-b380-f078068e3ac7

    Hope this information helped!

    Thanks and regards,
    Fouzan – Microsoft support.
    Visit our Microsoft Answers Feedback Forum
    http://social.answers.microsoft.com/Forums/en-%20US/answersfeedback/threads and let

    us know what you think.

  • RELEVANCY SCORE 2.84

    DB:2.84:Unable To Map Webdav Webdrive In Windows 7 8m



    Hi

    I am trying to map WebDAV webdrive from Windows 7 PC but getting below error

    'The Folder you enered does not appeared to be valid.Please choose another'

    Same URL gets successfully mapped from Windows XP PC.

    Can somebody please let us know if there is any issue with Win 7

    Thanks

    DB:2.84:Unable To Map Webdav Webdrive In Windows 7 8m


    I have been wrestling with Win7 and WebDAV for a few weeks now. It isn't just DCTM WebDAV. Microsoft rewrote/changed the way WebDAV works in Win7 (to make it work better/only with SharePoint?), and lots of folks are having a problem with it. Check Google, you might get lucky and find a solution to your problem.

  • RELEVANCY SCORE 2.84

    DB:2.84:Windows 7 Upgrade Software k9


    I just installed windows 7 upgrade on a Gateway pc.I had an error saying checkdisk had to repair the error.Now when it boots up I get as far as set up installation services and then it gets another error saying the pc restarted unexpectidely and the computer
    needs to restart to complete the installation. Any suggestions how to fix this problem??

    DB:2.84:Windows 7 Upgrade Software k9

    Wrong forum, sorry. Please repost your question here:
    http://social.answers.microsoft.com/Forums/en-US/w7install/threads

    ~Robear Dyer (PA Bear) ~ MS MVP (IE, Mail, Security, Windows Update Services) since 2002 ~ Disclaimer: MS MVPs neither represent nor work for Microsoft

  • RELEVANCY SCORE 2.84

    DB:2.84:Dreaded Fatal System Error C000021a fc


    I am getting a fatal error c000021a and the hard drive diagnostics Drive 0 failed with return code 7. Is this a hard drive replacement issue or is there another fix?

    DB:2.84:Dreaded Fatal System Error C000021a fc

    Hi Steven,

    • Who is the manufacturer of your computer? Mention the name and the model number?
    • Did you try running check disk see if that helps you to eliminate the fatal error?

    Return code 7 according to some OEM's is a bad/failed drive. However, based on my research I’ve found that Check disk has fixed some hard drives.

    If you’re not able to login, then I would suggest you to try running check disk from the Windows Recovery Environment using Windows Vista Operating System DVD.

    1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
    2. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then click

    Next.
    4. Click Repair your computer.
    5. Click the operating system that you want to repair, and then click Next.
    6. In the System Recovery Options dialog box, choose Command Prompt.
    7. By default, you’ll see X:\sources

    type c:

    C:\cd windows/system32

    C:\windows\system32\chkdsk /f /r

    If you get a message stating that there were some unrecoverable errors and chkdsk cound not fix it, then you’ll have to replace the hard drive.

    Note :Check Disk will try to fix the bad sectors on the hard disk. So data present on the bad sectors will be lost.

    Also, if you’re using an external video card, check if your hard drive is connected to the same power plug that is connected to the video card. If so, you’ll have to disconnect it and plug the HD to a different one.

    Try these steps and post your results back. I would also suggest you to contact your system manufacturer to check if they have any solution on this.

    Mouneshwar R – Microsoft Support
    -------------------------------------------------------------------------------------------------------------------
    Visit our Microsoft Answers Feedback Forum and let us know what you think

    [If this post helps to resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others find the answer faster.]

  • RELEVANCY SCORE 2.84

    DB:2.84:Windows-7 Upgrade Advisor Installation Error Message c9


    After downloading the Windows-7 Upgrade Advisor and when the install starts, right after I click "accept the agreement........" I receive a message stating that ".....another instance if the installer is running... wait until it finishes and try again......

    I tried rebooting my [Vista 32-bit Ultimate] system... but same results.

    Thanks,

    Mack

    DB:2.84:Windows-7 Upgrade Advisor Installation Error Message c9

    Hey mtc222,
    •On which version of Windows you are trying to run the Upgrade Advisor?
    •Please give us the complete and exact error message.
    •Does it happen when you try install any other program?
    Please right click on the task bar to check if any processes is running or not.
    If yes, please end the process and try to install again and check.
    I would like to suggest you using Windows Installer cleanup utility to fix Windows Installer and reinstall Windows Upgarde Advisor.
    1. Download and install the Windows Installer Cleanup Utility (
    http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe).
    2. Then, please run it from "Start" then "All Programs" then "Windows Install Clean Up".

    3. Select and remove relevant item with Windows Upgrade Advisor.
    For more information, please refer to:
    Description of the Windows Installer CleanUp Utility

    Upgrading from Windows Vista:

    http://windows.microsoft.com/en-us/windows7/products/upgrade?os=winvista

    Upgrading from Windows XP to Windows Vista:

    http://windows.microsoft.com/en-US/windows-vista/Upgrading-from-Windows-XP-to-Windows-Vista

    For your information:

    http://windows.microsoft.com/systemrequirements
    Regards,
    Savan – Microsoft Support.

  • RELEVANCY SCORE 2.84

    DB:2.84:Listener Error Port Conflict 1521 sk


    Ple help me to resolve my issue. I installed oracle 11g on windows 7. Showing an error message "use another port number" While configuring listener in Windows 7 environment. But I have checked that port with using netstat -nabo command even any application not engaged with this port.

    DB:2.84:Listener Error Port Conflict 1521 sk

    Thanks SB, missed that. OP, At the OS prompt if UNIX or Linux run ps -ef | grep lsn. This will show if a named listener is being used. The code posted does not set the listener name which is how most shop probably set up the listener but I have seen named listeners used so I guess that is worth checking.Also please verify you have set the $ORACLE_HOME correctly before attemping to access the listener.Are any database instances up and running? Is yes and the instance is 11g can you use a sysdba connection and run the following query to check to see what port is in use between the listener and the database.set echo off---- Show Listener Connect Information for Instance, req 11g+---- 2013-09-19 Mark D Powell Save 4 future use--set pagesize 99select *from v$listener_network/HTH -- Mark D Powell ---

  • RELEVANCY SCORE 2.84

    DB:2.84:Install Failure With Lr 5, Error Message Message 7, Os 10.6.8, Everything Up To Date cm



    I see Adobe has released another product with bugs in the install. Has anyone had success with install after getting the dreaded 'error 7'?

    DB:2.84:Install Failure With Lr 5, Error Message Message 7, Os 10.6.8, Everything Up To Date cm


    Byumom11 you need to have Mac OS 10.7 or later to install and use Lightroom 5. Please see the system requirements at http://www.adobe.com/products/photoshop-lightroom/tech-specs.html.

  • RELEVANCY SCORE 2.83

    DB:2.83:What Does Error 0x80070057 Mean Exactly I See The Error Code In Many Scenarios On Forums. In My Case, I Got It When Trying To Move A Folder To Another Location. 81


    Error occurred on laptop: Windows 7 64 bit with Waterfox

    DB:2.83:What Does Error 0x80070057 Mean Exactly I See The Error Code In Many Scenarios On Forums. In My Case, I Got It When Trying To Move A Folder To Another Location. 81

    Hi,

    1. Is the folder that you are trying to move, stored on a network location?

    2. Are you trying to move a encrypted folder?

    3. Are you trying to move this folder to an external drive?

    4. Is this issue specific to a particular folder?

    5. Are you running a back up online or folder lock software?

    This error might occur due to various reasons and there is no specific cause for this error. However, we may start off troubleshooting by eliminating third party software conflicts.

    Please follow the links mentioned below to help troubleshoot the issue.

    Start your computer in clean boot.

    http://support.microsoft.com/kb/929135

    Note: Once you have completed all the necessary troubleshooting steps please perform step 7 from the article mentioned above to start the computer in normal mode.

    Try moving the file\folder after you start the computer in clean boot and post your results.

    Hope this helps.

  • RELEVANCY SCORE 2.83

    DB:2.83:I Have Installed Windows 7 Professional In C Drive .But I Can Not Install Windows 7 Ultimate In Another Drive. kp


    i have installed windows 7 professional in c: drive in intel compaq 6820s,i want to install windows 7 ultimate on another drive of computer.but when i trying to install window 7 ultimate on another drive excepting c drive,i get error that this drive is
    not compatible.this hard disk has more than one dynamic volumes''what should i do for installing windows 7 ultimate in adrive other than c.what should i do with another drive so that i may be able to install windows 7 in other drive.

    DB:2.83:I Have Installed Windows 7 Professional In C Drive .But I Can Not Install Windows 7 Ultimate In Another Drive. kp

    you says that one can not install a windows operating system on a drive that is currently a dynamic drive.but there is windows 7 installed in drive c: which is dynamic.how u can say windows operating system can not install on drive which is dynamic.

  • RELEVANCY SCORE 2.83

    DB:2.83:Windows 7 Backup. Near End Gets Error 4104 The Error Is The Process Cannot Access The File Because It Is Being Used By Another Process. 0x80070020. Any Ideas 9a


    It worked on 24th July and has failed from 31st July in between I loaded Windows 7 Service Pack 1 for x64-based Systems (KB976932)

    DB:2.83:Windows 7 Backup. Near End Gets Error 4104 The Error Is The Process Cannot Access The File Because It Is Being Used By Another Process. 0x80070020. Any Ideas 9a

    This is a copy of the event viewer display for the last failure

    Log Name: Application
    Source: Windows Backup
    Date: 21/08/2011 03:37:48
    Event ID: 4104
    Task Category: None
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: owner-PC
    Description:
    The backup was not successful. The error is: The process cannot access the file because it is being used by another process. (0x80070020).
    Event Xml:
    Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"
    System
    Provider Name="Windows Backup" /
    EventID Qualifiers="0"4104/EventID
    Level2/Level
    Task0/Task
    Keywords0x80000000000000/Keywords
    TimeCreated SystemTime="2011-08-21T02:37:48.000000000Z" /
    EventRecordID25149/EventRecordID
    ChannelApplication/Channel
    Computerowner-PC/Computer
    Security /
    /System
    EventData
    DataThe process cannot access the file because it is being used by another process. (0x80070020)/Data
    Binary20000780E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000
    /Binary
    /EventData
    /Event

  • RELEVANCY SCORE 2.83

    DB:2.83:"Error In Data Selection" While Loading jc



    hi,

    while loading data from one ODS to another(datamart) I, after extraction of some data packages successfully I m getting an error:"Error in data selection"

    i saw its help messages were

    1)error 7 when sending an idoc

    2)sql error in accessing table no 13

    3)error in source system

    in the source ods i have loaded thru init from R/3..

    please help

    DB:2.83:"Error In Data Selection" While Loading jc


    Hi,

    Take a look on the cosulting note : 610938.

    In place of R/3 system you have to consider BW itself when you are reading the note.

    With rgds,

    Anil Kumar Sharma .P

  • RELEVANCY SCORE 2.83

    DB:2.83:Error Ox807800a1 mx


    I receive error Ox807800A1 when I try to backup to a My Book external drive. I use another My Book on my other desktop with no problems. Both run win 8 32 bit. tried the win 7 backup error fix to no
    avail; please help. thank you

    DB:2.83:Error Ox807800a1 mx

    is the external HDD fine? Run chkdsk to see this. Also, does the destination folder exists on the external HDD?A programmer is just a tool which converts caffeine into code

  • RELEVANCY SCORE 2.83

    DB:2.83:Getting Another Error Message dz



    Another error message(109). Can anyone help?

  • RELEVANCY SCORE 2.83

    DB:2.83:Another 'Shared Lib' Problem 38


    Ever since installing 10.4.10 there are several programs I've been unable to open, giving me the 'Shared Lib' error. These programs are Final Draft 7, IE, Poser 5, Terragen, iMovie and Photoshop 7... about 60% of my application Another problem is iTunes crashing as soon as I click on 'Music'.

    DB:2.83:Another 'Shared Lib' Problem 38

    Hey Joe, already tried Disk Utillities, as well as Disk Warrior, but not from the OS DVD, which I'm 180 miles away from at the moment. Will give it a go when I get home, although I've go a feeling I'll have to Archibe and Install.

    Thanks,

    Mak

  • RELEVANCY SCORE 2.83

    DB:2.83:I Have An 02:10 Error Code On My Designjet 130nr. Somebody Can Help? 3d



    Designjet 130nr

    Product # C7791H

    OS: Windows 7, 64-bit

    Error code: 02:10

    No changes were made. From one day to another the printer showed this error

    DB:2.83:I Have An 02:10 Error Code On My Designjet 130nr. Somebody Can Help? 3d


    This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.

  • RELEVANCY SCORE 2.83

    DB:2.83:App Works On Ipad, Iphone, And Windows 7 Pc But Not On Another One Pc (Error 05-123-0) p9



    The Nomad app works fine on my iPad 2 5.0, iPhone 4 4.3, and one Windows 7 64-bit PC but I have another Windows 7 64-bit that can't find the Nomad. I get an error 05-123-0. I've tried turning off the firewall, reinstalling, running as administrator, running in compatibilty mode, etc. and keep getting the same error.

    What else should I be looking for?

    DB:2.83:App Works On Ipad, Iphone, And Windows 7 Pc But Not On Another One Pc (Error 05-123-0) p9


    It sounds like you did find issues with your network configuration. So, what errors are you seeing now? The activation and registration process simply requires the nomad to have the ability to hit our servers and since you have already activated a couple of devices, it does not appear that would be the overall issue. It appears the issue is isolate to a single PC you are trying to activate, that is why I need to know what are the errors now. Did you restart this computer?

    Please correct me if my assumptions are wrong.

  • RELEVANCY SCORE 2.83

    DB:2.83:Urgent Help Needed : 0x000007b And Error Code 7... ss


    Hello, another problem with my Dell Dimension 9200 :( im not happy.

  • RELEVANCY SCORE 2.83

    DB:2.83:Getting Activation Error 0x80072ee2 x8


    I have move my hard drive to another computer with windows 7. I have to re-activate my Windows but getting activation error 0x80072ee2

    DB:2.83:Getting Activation Error 0x80072ee2 x8

    I have move my hard drive to another computer with windows 7. I have to re-activate my Windows but getting activation error 0x80072ee2

  • RELEVANCY SCORE 2.83

    DB:2.83:Windows 7 Sync Issue md


    HI,
    We have a users with windows 7 OS having issue with Offline file.

    We are getting following error.
    The Process cannot access the file because it is being used by another process
    OS: Windows 7 Professional.

    Kindly advise.

    DB:2.83:Windows 7 Sync Issue md

    Hi,

    Thanks for the post!

    This error may be related to the opportunistic locking is not enabled.

    In order to enable it, we need to modify the registry, please make
    sure you back up the registry firstly.

    Then follow the steps:
    1.Go to start and type regedit.exe in the search field.

    2.Select regedit.exe from the list.
    3.Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
    4.Change the value of the REG_DWORD EnableOplocks
    from 0 to 1 (enabled).
    Reboot your computer and retry your offline files synchronization.
    Also refer to
    Configuring opportunistic locking in Windows.
    Please feel free to give me any update.
    Best Regards,
    Miya Yao
    This posting is provided AS IS with no warranties, and confers no rights. | Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.83

    DB:2.83:Labview Error: No Longer Builds Executables 31



    I have full development license and my labview creates an error when i try to build executables. does this error mean anything to anyone? btw, it used to make .exe's without issue.

    the error reads:

    Error 7 occurred at AB_Build.lvclass:Create_Destinations.vi - AB_Application.lvclass:Create_Destinations.vi

    when i try another time theerror reads:

    Error 7 occurred at Copy in AB_Targetfile.lvclassostBuild.vi-AB_Application.lvclassostBuild.vi-AB_Build.lvclass:Build_from_Wizard.vi-AB_UI_Frmwk_Build.lvclass:Build.vi-AB_UI_FRAMEWORK.vi-AB_Create_Build_Application.vi-EBUIP_Global_OnCommand.vi-EBUIP_Global_OnCommand.vi.ProxyCaller

    thanks,

    Erik

    DB:2.83:Labview Error: No Longer Builds Executables 31


    Hi Erik,

    A couple of questions for you - What is your destination directory for the build? Do you have write permissions for that folder? Is it on a network drive?

    Does this happen for all exes or just for this specific project? If you build a simple VI into an exe on the desktop, do you get the same error?

    What version of LabVIEW are you using?

    Regards,

    Jeff Peacock

    Product Support Engineer | LabVIEW RD | National Instruments | Certified LabVIEW Architect

  • RELEVANCY SCORE 2.83

    DB:2.83:Windows 7 Ultimate X64 Backup Error 0x8007000e j7


    I was getting an error earlier 0x01000038 and did a search and found a solution. The Windows 7 Backup started and got all the way to the end and I got the message that the last backup didn't complete successfully agin only this time I got a different error 0x007000E. Did another search and found nothing that related to Windows 7 Backup.Any suggestions or fixes?Craig

    DB:2.83:Windows 7 Ultimate X64 Backup Error 0x8007000e j7

    It seems that I had some sort of issue with the size of memory Windows 7 Backup was seeing. I cleared all backups and images off backup drive, rebooted and it worked this time. CCASE CLOSED