• RELEVANCY SCORE 4.00

    DB:4.00:Pitch Bend Wheel Does Not Respond As It Should cz




    I have the latest GB and Mountain Lion.
    Now I wanted to use the pitch bend wheel for a Guitar track, using the standard "Big Lead" guitar.But although it sounds correct while recording (with the musical keyboard), the result is only half of the wanted pitch bend.
    And even when I try to correct it manually in the pitch editor dialog, it does not change!I tried also to use the pitch wheel in Absynth and FM8, but with the same result.likeIs there any workaround?I would like to be able to set the range of the pitch bend wheel, too.
    Another way, which could be helpful, if I could use the AUPitch plugin in conection with an automation track - I mean, to be able to control the input. Now it's quite useless in the automation track, because there is no way to get a desired value. By the way, the same problem (to get excact values) appears in the volume track of the master track!!!!It would be a great help, when I could double click a dot to enter a value by numbers. Any help would be appriciated!Dietmar

    DB:4.00:Pitch Bend Wheel Does Not Respond As It Should cz

    I have the latest GB and Mountain Lion.
    Now I wanted to use the pitch bend wheel for a Guitar track, using the standard "Big Lead" guitar.But although it sounds correct while recording (with the musical keyboard), the result is only half of the wanted pitch bend.
    And even when I try to correct it manually in the pitch editor dialog, it does not change!I tried also to use the pitch wheel in Absynth and FM8, but with the same result.likeIs there any workaround?I would like to be able to set the range of the pitch bend wheel, too.
    Another way, which could be helpful, if I could use the AUPitch plugin in conection with an automation track - I mean, to be able to control the input. Now it's quite useless in the automation track, because there is no way to get a desired value. By the way, the same problem (to get excact values) appears in the volume track of the master track!!!!It would be a great help, when I could double click a dot to enter a value by numbers. Any help would be appriciated!Dietmar

  • RELEVANCY SCORE 3.37

    DB:3.37:Pitch Bend To External Instruments In Ms2 Flawed 1m




    Does anyone have problems transmitting correct Pitch Bend to external midi instruments in Mainstage 2?

    I'm using a wind controller and PB doesn't work very well.

    Thor

  • RELEVANCY SCORE 3.37

    DB:3.37:Bend Range k3




    I am looking for the bend range, not the pitch range on the exs24. Can you tell me where it is?

    DB:3.37:Bend Range k3

    I am looking for the bend range, not the pitch range on the exs24. Can you tell me where it is?

  • RELEVANCY SCORE 3.29

    DB:3.29:Vocal Pitch Bend ks


    My friend just made a song in their music program and it had a cool pitch bend effect on the voice... i was wondering if there's anything like that in garageband?

    DB:3.29:Vocal Pitch Bend ks

    i tried it out, and it worked just fine. you answered my question there anyway. thank you again!

  • RELEVANCY SCORE 3.29

    DB:3.29:Bend Modifier 9k


    Does anyone actually understand how the bend modifier works? The help file doesnt really explain it very well #40;or maybe I'm just thick#41;. It just seems unpredictable!Any better explaination anywhere?



    3DS Max 6 to 2009, Maya 2010 NVIDIA Quadro 1700, Quad Core 2.67GHz, 4Gb RAMwww.beanboxanimation.co.uk

    DB:3.29:Bend Modifier 9k

    Thanks for your reply Tim. It may help get me closer to understanding the bend modifier. If you understand something you should be able to predict the outcome, however, I currently can't predict which way it will bend. I will experiment with the ref coordinates.Many thanks Tim!!!...I currently can't predict which way it will bend.You dont need to predict it :#41; Apply Blend, set its parameters to something not-zero, then play with the Blend sub-oject Gizmo and Center. Move it, Rotate it, then you will see, and can set it where the object blend.

  • RELEVANCY SCORE 3.18

    DB:3.18:Pitch Bending Question sf


    Is there a way to achieve greater pitch bends on a note beyond what the "bender" allows or (even) what a pitch wheel might offer on a keyboard? Having to use separate notes to achieve the transitional pitches I'm after most takes away from the realism... Thanks.

    DB:3.18:Pitch Bending Question sf

    Thanks Mike -

    I'll see if I can find such a control as mentioned.

  • RELEVANCY SCORE 3.03

    DB:3.03:Re: Sheet Metal Bend Command Question 7c


    I am trying to bend a shape using a bend line that does not fall within the profile of the part. Inventor will not let me pick the line I have drawn in the attachment to bend on. Can this be done? Is there another way?









    Attachments:






    BEND SHEET METAL.JPG ‏95 KB

    DB:3.03:Re: Sheet Metal Bend Command Question 7c

    2010 might work to unfold. Can you post the part,
    zipped?
    -- Dennis Jeffrey, Autodesk Inventor Certified
    ExpertAutodesk Manufacturing Implementation Certified
    Expert.Instructor/Author/Sr. App Engr. Tel. (260) 399-6615AIP 2008 SP3,
    AIP 2009-SP1 PcCillin AVAMD 64 x2 3.0 Ghz, 8GB RAM GeForce 9800GT 512MB
    XP Pro SP3, Windows XP Silver Theme
    href="http://teknigroup.com"http://teknigroup.com

  • RELEVANCY SCORE 3.03

    DB:3.03:Question About Mp3 Mixing Software zz


    Are there any mac programs that will let you beat mix mp3's with pitch control, bend, etc? like you do when you are using 2 turntables or a double CD player with pitch bend controls....

    DB:3.03:Question About Mp3 Mixing Software zz

    you really need to loosen up and try not living such
    a rigid life...

    thanks for the wonderful help, most people are very
    helpful and friendly even if the topic is not 100%
    about the Specific Forum.

    Aloha (you should try living with aloha sometime)

    In this forum people will answer a question if they know the answer (even, sometimes, when it's off-topic). If they don't, there really isn't any reason why they should spend time doing research for you when, once pointed in the right direction, you can easily do it yourself. Researching is also a good way of learning about the subject.

  • RELEVANCY SCORE 3.00

    DB:3.00:Controlling Logic Pro Pitch Bend zc


    Okay I just got Logic Pro 9 and haven't even dived into the manual yet but I hope someone can step me through this nonetheless. How do I control the pitch bend sound for the software guitar? It has this unappealing country twang (no offense to country fans) every time I hit the pitch bend button on my midi and it's driving me batty. I have to get rid of it. Can someone please guide me through changing this? I'm looking for a pitch bend setting similar to the one in garageband, more of a rock feel, or better. Anything but this.Thank you, for the love of God, thank you.

    DB:3.00:Controlling Logic Pro Pitch Bend zc

    Okay I just got Logic Pro 9 and haven't even dived into the manual yet but I hope someone can step me through this nonetheless. How do I control the pitch bend sound for the software guitar? It has this unappealing country twang (no offense to country fans) every time I hit the pitch bend button on my midi and it's driving me batty. I have to get rid of it. Can someone please guide me through changing this? I'm looking for a pitch bend setting similar to the one in garageband, more of a rock feel, or better. Anything but this.Thank you, for the love of God, thank you.

  • RELEVANCY SCORE 2.99

    DB:2.99:M Audio Keystation 49e Is Recognized But Not Working x8


    hey everyone the m audio keystation 49e is recognized by my macbook but it's not working. In garageband for example the volume slider moves the volume slider in garageband's mixer and changes the volume and if move the pitch bend and modulation wheel while playing through garageband's onscreen keyboard it changes the sound, but if i play any keys on the keystation nothing happens. Also when i plug it in a message pops up saying "The number of MIDI inputs has changed. Now one input is available." Can anyone help me out. Thanks

    DB:2.99:M Audio Keystation 49e Is Recognized But Not Working x8

    Hi, on my iMac the M-Audio Keystation 49e works great.

    A test whit GB and al worked well (Just the USB connection)
    Volume, Pichbender, Modulation, Octave up-down, all work fine.

    Ore reset your 49e (see your manual for details) maybe there are some internal settings in the Keystation that mess up your connetction.

    Try a testing using SimpleSynth (http://notahat.com/simplesynth/
    ore Midikeys (http://www.manyetas.com/creed/midikeys).

  • RELEVANCY SCORE 2.96

    DB:2.96:Need Help With Exs24 And Cc#'S cf


    Hi, I use purchased midifiles and then change most of the tracks from GM sounds to my plugin's (EXS24, EzDrummer, NI Komplete4)

    I am coming across CC#101 101 which are suppose to set the pitch bend wheel depth. The default would be +-2, but these CC#'s are telling me to change the depth as the song moves along to either +-12 or +-5 etc at various points.

    How can I move these CC#100 101 to EXS24 to do the same job?

    As far as I can see, the pitch bend depth is currently set to +-2 and no way of either automating it or telling EXS24 to read the CC#100 101 to change the depth.

    Need this to work!!

    Thanks
    C.

    Macbook Pro 15" 2.16Ghz Intel Core Duo Mac OS X (10.4.8) 2GB Ram, Logic Pro 7.2.3, Focusrite Saffire, Motif ES Rack

    DB:2.96:Need Help With Exs24 And Cc#'S cf

    Thanks for the info,

    I had to search for the key command (AppleCntrlE) this opens Automation Event Edit and I saw that it was Fader 5 I was after, using transformer after that seems straight forward.

    C.

  • RELEVANCY SCORE 2.95

    DB:2.95:Cant Change Rotary Speaker With Wheel a1


    Hi I'm trying to change the rotary speaker in the Garage Band tonewheel organ using the modulation wheel on my midi keyboard.The activity shows up as a Midi input but the settings don't change,neither does the Pitch Bend.I have been right through the settings in Logic and garage band .Any help would be appreciated/Thanks

    DB:2.95:Cant Change Rotary Speaker With Wheel a1

    Hi I'm trying to change the rotary speaker in the Garage Band tonewheel organ using the modulation wheel on my midi keyboard.The activity shows up as a Midi input but the settings don't change,neither does the Pitch Bend.I have been right through the settings in Logic and garage band .Any help would be appreciated/Thanks

  • RELEVANCY SCORE 2.94

    DB:2.94:Pitch Correction d9


    Hi,

    I'm using garageband '09, and I wanted to know if there was any way I could pitch bend certain parts of my vocal tracks, I am well aware that there is a pitch correction effect and I also know how to use autotune but what if i just want to pitch bend one word ?!

    Audrey

    DB:2.94:Pitch Correction d9

    AudreyMartin wrote:
    any way I could pitch bend certain parts of my vocal tracks

    use the AUPitch effect, and create an automation curve for it (search for "curve" in GB's help)

  • RELEVANCY SCORE 2.89

    DB:2.89:How Do You Pitch Bend Without A Controller Or A Wheel? kz


    Hi,
    I'm new to Logic LE9 and I'm trying to create the effect of a slide on a midi bass line. All I want to do is slide from A to B. I've looked everywhere on the internet for advice and it looks like one place to do it is in the hyper editor.

    But once in there, I can't work out exactly what to do. I've located the note, I know that I need to draw some bars in the Pitch lane above the note, but I don't know how the numbers correspond to the notes when I'm drawing the bars.

    If I had a pitch wheel on my keyboard or a bass, this wouldn't be a problem, so I spose I'm asking, how do you do it manually?

    Thanks...

    DB:2.89:How Do You Pitch Bend Without A Controller Or A Wheel? kz

    Thanks for the reply, I've found the Hyper draw function in the piano roll which is a bit easier to get my head around.

    But I still have one more question, for the values 0-127 in pitch, and if a value of 64 is the un-bent note, would a value of 127 represent two semi-tones above? It sounds like it could be, but it would be good to know what these values represent.

  • RELEVANCY SCORE 2.88

    DB:2.88:Editing Glide Notes From Gb Ipad In Gb On The Mac? za


    Hello,

    I've imported my iPad songs into GarageBand on the Mac now that the update came out and I don't find a way to edit the glide notes that you can make with the Synths where you slide the finger across the keyboard in "pitch" mode rather than triggering single notes. It doesn't seem to be pitch bend or modulation.

    Has anybody had any luck finding a way to edit those?

    The slide controlls two values. The pitch change and a kind of modulation (often vibrato) and neither of those show up in my views.

    DB:2.88:Editing Glide Notes From Gb Ipad In Gb On The Mac? za

    Hello,

    I've imported my iPad songs into GarageBand on the Mac now that the update came out and I don't find a way to edit the glide notes that you can make with the Synths where you slide the finger across the keyboard in "pitch" mode rather than triggering single notes. It doesn't seem to be pitch bend or modulation.

    Has anybody had any luck finding a way to edit those?

    The slide controlls two values. The pitch change and a kind of modulation (often vibrato) and neither of those show up in my views.

  • RELEVANCY SCORE 2.85

    DB:2.85:Roland Pc 180 Midi Controller Pitch Bend Not Working mf


    How do I get my Roland Pc 180 midi controller keyboard pitch bend to work in Garageband?

    I'm using a Fasttrack pro interface into my G5 mac.

    Thanks.

    DB:2.85:Roland Pc 180 Midi Controller Pitch Bend Not Working mf

    You got it. Pianos and Organ's for instance, do not have pitchbend in real life, so they don't in MIDI either (would be fun,though)

  • RELEVANCY SCORE 2.85

    DB:2.85:How Do You Quantize Midi Data Like Pitch Bend ? j3


    If you record a keyboard part with some pitch bent notes and modulation, how do you quantize so that the midi data moves with the notes? I cannot find an easy way to do this. Obviously it's hard to tell where continuous midi data starts and where it ends, but if you are pitch bending a note - could it not cut the midi data for pitch bend at the start and end points of that note, and move it with the note when the note is quantized?

    There is an option to have non-note data quantized, but it quantizes every point in the hyper draw to a blocky mess - it does not move the chunk of data relative to the note.

    This seems like a very simple and desirable thing to do?
    Have the midi data performance move with quantized notes.
    Right now, if you quantize a performance that has pitch bend and modulation - you ruin the performance because the notes move, but not the pitch bend and modulation.

    Any tips?

    Scott.

    DB:2.85:How Do You Quantize Midi Data Like Pitch Bend ? j3

    You say that in the hyper editor, quantizing pitch bend was a breeze?
    How so?

    If you have a nice pitch bend curve with 30 point on it, and then quantize - those points move to square positions that are unrelated to the start of the note - it does not quantized relative to the start and end points of the note. The note moves, and the pitch changes are now not 'under' the note anymore - although they are in some strange sense "quantized".

    The only work around I have found, is to open up the event list, and create a pitch bend 'event' at the same point in the bar as my note is on, then another pitch bend event somewhere after my note ends. Then after I quantize the note - I go into the hyper editor, and select all the points in the range that were 'under' the original note, and slide them. I then quantize by hand in the event list, because I know that first point was under the note start point, I select all the points and edit the first one so that it's new start point is in the notes' new quantized location. Then my pitch shift is where it should be relative to the note.

    This works, but boy is it a laborious task for something that seems many keyboard players would want to do easily on a regular basis. Quantize your performance, not just your notes.

    S.

  • RELEVANCY SCORE 2.85

    DB:2.85:Pitchbend And Other Control Events Not Being Displayed zd


    I have a bunch of projects created with Software instruments exclusively. All started out as MIDI files that I imported with previous versions of GB.

    My problem is, since upgrading to GB 08, that NONE of the control events are visible anymore: Pitch Bend, Modulation, Expression... NADA. They were all visible in previous versions. I upgraded to GB '08 from GB3, but GB2 showed all the MIDI events as well.

    i.e. I can select a track that I know has pitch bend (guitar track) and even though I can definitely hear the pitch bend, there is nothing displayed in the editor window in pitch bend mode. I have even cycled through all the other modes just to make sure, and there is nothing.

    Can anyone tell me if there is a special way to display pitch bend, or other events from a imported midi file?

    Thanks
    Gary

    DB:2.85:Pitchbend And Other Control Events Not Being Displayed zd

    Thanks Chris for the reply. I was getting a bit of a complex..

    Gary

  • RELEVANCY SCORE 2.84

    DB:2.84:49e Keyboard Freeze ma


    OK, I'm going straight to M-Audio after I post this. There are no driver updates from M-Audio for my 49e.

    My M-Audio 49e keyboard works fine until I start using either my mod wheel or my pitch wheel. Between 5-15 seconds of usage, the keyboard will freeze (thus playing the current note or chord continuously) and will no longer respond to input. The only way I can regain control is to shut off the keyboard, then restart it.

    Any clues?

    DB:2.84:49e Keyboard Freeze ma

    Yay for good news, and no need to buy a new keyboard

  • RELEVANCY SCORE 2.83

    DB:2.83:How To Slide Between Different Notes/Pitches In Midi? 3x


    I'm trying to achieve a portamento effect where I can slide between different notes (like pitch bending but on a large scale). The closest I've gotten is using the setPitchBend() method in MidiChannel. However, this only allows a range of 2 semitones from the note I started with. Is there another way to achieve this portamento effect, or maybe changing the pitch bend range?

    DB:2.83:How To Slide Between Different Notes/Pitches In Midi? 3x

    I'd assume you'd want to set the sequence to "slur" notes and then just calculate the notes between a top bottom value based on a float and generate NOTE_ON messages appropriately.

    The pitch bend is designed to emulate / support the bend wheel found on sound keyboards...and it just modifies the pitch associated with a given note. A pitch bend of +2 would turn an A into B, etc...

    So, you'd want to do...

    SET_SLUR (however you do that, I'm not a MIDI expert)
    pitch = bottom_pitch + ((top_pitch-bottom_pitch) * sliderValue);
    NOTE_ON(pitch)

  • RELEVANCY SCORE 2.83

    DB:2.83:Re: Animate A Bend Using Inventor Studio 9j



    Hello all,

    Does anyone know if its possible to animate a bend feature using Inventor studio? Ive seen other posts where someone suggests the bend in a simulation, but I need a animated bend feature in Inventor Studio for a rendered video.

    Any Ideas or help would be great, Thanks in advance!







    Solved!
    Go to Solution.

    DB:2.83:Re: Animate A Bend Using Inventor Studio 9j


    Im gonna take some screen shots for you so you can see how its done.

  • RELEVANCY SCORE 2.83

    DB:2.83:German Word: 'AnschlagstäRke' In Hyper Editor? Logic 7.2.1 fp


    Hi People. I'm a newbee on the forums and with music making, so first...hi to you all!

    My question...

    When i hyperedit a region, the Hyper Editor displays this...

    Volume
    Pan
    Modulation
    Pitch Bend
    Ch. Pressure
    Poly Pressure
    Program and
    'Anschlagstrke' What the...?!

    Does everybody have that with 7.2? Or 7.2.1?
    Did i do something wrong with an update?

    Greetings,
    Benny

    (yes...i'm a nitpicker...

  • RELEVANCY SCORE 2.81

    DB:2.81:Use Usb Joystick As Midi Cc? 8a


    While I have no knobs on my midi keyboard (no CC's at all, not even pitch bend or mod wheel), I noticed my old usb joystick lying around. The joystick could theoretically (in my mind) be a source of continuous control in 3 ways (x-axis, y-axis, slider). Is there any way that events from my joystick could be translated into midi events? Some kind of software?

    Many thanks in hope,
    Joe

    DB:2.81:Use Usb Joystick As Midi Cc? 8a

    While I have no knobs on my midi keyboard (no CC's at all, not even pitch bend or mod wheel), I noticed my old usb joystick lying around. The joystick could theoretically (in my mind) be a source of continuous control in 3 ways (x-axis, y-axis, slider). Is there any way that events from my joystick could be translated into midi events? Some kind of software?

    Many thanks in hope,
    Joe

  • RELEVANCY SCORE 2.81

    DB:2.81:Possible In Hyper Editor? 1d


    Is it possible to use the hyper editor to do something like: attach a pitch change to the end of all the (midi) notes within a certain range or time frame? In other words, if I want each note from bar 1 to 20 to bend up 4 semitones, is that possible?

    DB:2.81:Possible In Hyper Editor? 1d

    OK, then just draw one eighth note of pitch bend data, you'll need a hi-res grid for it to be meaningful, copy it, move the spl to the next note location and paste. You can do this all with key commands.

    The problem is that you have little control over it, other than varying the scaling that the synth responds to pitchbend. It did however, only take me 45 seconds and a few mouse clicks to open Sculpture, target envelope 2 to Pitch and set up the envelope for an eigth note sync'd to tempo. Then you just automate/toggle the Enable Envelope 2 Target 1 parameter for the bars that want the effect.

    But hey, if you want to do it with pitchbend, then you go guy!

  • RELEVANCY SCORE 2.80

    DB:2.80:Question About Midi Learning 87


    alright so i finally figured out how to map out midi using apple-L in logic. I think this is the easiest way.

    i have a question though, as i am new to midi.

    Each knob corresponds to something i can do with my mouse right? so if i can change the wave form with my mouse by dragging a knob i can set that to a tangible knob on m controller. okay.

    now, for stuff like modulation, pitch bend, and sustain, where is that found on the computer? is there a virtual knob or are these midi controls always set to do the same thing? inother words, can i pitch bend by doing something with my mouse? can i see my pitch bend wheel to do something else? can i set something else to do what my pitch bend does?

    remember i am new so if you could try to keep the language/instruction simple for me i would appreciate it.

    also, and i realize i should post this in the Digidesign forums, does anyone happen to know how to midi learn somthing like the mixer levels in protools?

    thanks.

    DB:2.80:Question About Midi Learning 87

    Sorry I dont know. Bought LE8 some weeks ago, got bored with SX3.

    There's some other fora as well for Logic, try there.

    W.

  • RELEVANCY SCORE 2.79

    DB:2.79:Using Pitch Bend In Logic z3


    Hello
    I wonder how I use pitch bend on one single tune.

    Best regards / Freddy

    DB:2.79:Using Pitch Bend In Logic z3

    Well, forget about the first question. I know how I use pitch bend in piano roll with keyboard, but how can you do it with voice that you've recorded?

    Best regards / Freddy

  • RELEVANCY SCORE 2.78

    DB:2.78:Pitch Bending Vocals 3m


    I would like to be able to pitch bend the last word in a vocal phrase. Can anyone advise me as to how I can do this? I do have a midi keyboard with a pitch bend control. Thanks.

  • RELEVANCY SCORE 2.78

    DB:2.78:Multitrack Pitchbend ac


    I'm having some trouble importing midi files into garageband. I'll drag the desired file into the garageband window. This creates separate tracks for each channel of the midi file, 15 in all. Now, all of these channels have pitch bend changes associated with them. However, these changes only appear on the first track of the sequence. Any idea why this might be? If I record the same sequence into garageband, squashing all channels onto one track, every channel's pitch bend changes appear as desired. However, when importing I'm left with only the first channel's worth of pitch bend data, or at least only that visible in the note editor. Thanks in advance for any help.

    DB:2.78:Multitrack Pitchbend ac

    I'm having some trouble importing midi files into garageband. I'll drag the desired file into the garageband window. This creates separate tracks for each channel of the midi file, 15 in all. Now, all of these channels have pitch bend changes associated with them. However, these changes only appear on the first track of the sequence. Any idea why this might be? If I record the same sequence into garageband, squashing all channels onto one track, every channel's pitch bend changes appear as desired. However, when importing I'm left with only the first channel's worth of pitch bend data, or at least only that visible in the note editor. Thanks in advance for any help.

  • RELEVANCY SCORE 2.77

    DB:2.77:Auto Pitch Bend &Amp; Modulation On M-Audio Key Station Pls Help !! 1x


    During recording process, even without a key is pressed from Key Station (41), the Pitch Bend Modulation is triggered on and off randomly in a minor scale on the track, leaving a blank recorded region with minor vertical bars of Pitch Bend Modulation.
    This happens as well when notes are played giving very interrupted music from Key Board.

    Is my Key Station gone? Do i need to reinstall the M-Audio Driver?

    If so can anyone show how do i uninstall the M-Audio Driver before i proceed?

    Regards
    Kajendra

    DB:2.77:Auto Pitch Bend &Amp; Modulation On M-Audio Key Station Pls Help !! 1x

    During recording process, even without a key is pressed from Key Station (41), the Pitch Bend Modulation is triggered on and off randomly in a minor scale on the track, leaving a blank recorded region with minor vertical bars of Pitch Bend Modulation.
    This happens as well when notes are played giving very interrupted music from Key Board.

    Is my Key Station gone? Do i need to reinstall the M-Audio Driver?

    If so can anyone show how do i uninstall the M-Audio Driver before i proceed?

    Regards
    Kajendra

  • RELEVANCY SCORE 2.74

    DB:2.74:Pitch Bend Issues zd


    I've been experiencing pitch bend issues where the note doesn't reset to the original pitch. I first assumed it was my keyboard (Alesis QS 7.1) but now I'm experiencing the same problem with my Roland Ax1. Any insights would be greatly appreciated!

    DB:2.74:Pitch Bend Issues zd

    I've been experiencing pitch bend issues where the note doesn't reset to the original pitch. I first assumed it was my keyboard (Alesis QS 7.1) but now I'm experiencing the same problem with my Roland Ax1. Any insights would be greatly appreciated!

  • RELEVANCY SCORE 2.73

    DB:2.73:How Do I Set The Range Of Pitch Bend For The Efm-1? 7k


    Hi folks,I have a simple patch for my EFM-1 and I want to apply a pitch bend in Mainstage. It is presently set up to go a whole step up or down when the pitch bend is pushed all the way up (or down). I probably set it up that way.....but I can't for the life of me remember how I did it, or how to change it. For this particular patch, I need the pitch bend to go an octave. Where do I set this usually easy-to-find parameter? Is there a global setting? (It seems to be set for a whole step for all patches). A setting within the EFM-1?Thanks!-Mike Kaplan

    DB:2.73:How Do I Set The Range Of Pitch Bend For The Efm-1? 7k

    Yeah, I think there is no such parameter for the EFM1! Surprising. I thought it should still be possible in Mainstage to do this by reassigning the pitch wheel directly to one of the oscillator parameters within the EFM1, but no luck.Anyway, as a workaround, I made a similar sound in the ES2, which DOES have control of the pitch bend input. Luckily the sound itself was easy to recreate- I just needed a sound with 5 or 6 harmonic partials and no modulation.

  • RELEVANCY SCORE 2.73

    DB:2.73:Need Help With Problem Using Pitch Bend Wheel In Logic 8 78


    Hello,

    I just upgraded to Logic Studio to compose an upcoming film score with, and I've run into a problem. Previously I used GarageBand and the Symphony Orchestra Jam Pack with my 66-key M-Audio Keystation MIDI keyboard, using the pitch bend wheel for string crescendos and decrescendos. It's made a huge difference in lending more performance emotion to the piece. Logic 8 is an incredible improvement over Garageband, but for some reason the pitch bend wheel no longer works to control the volume/expression of the strings. This is also the case now with Garageband (even though it worked fine before installing Logic Studio). I did a lot of research to try to figure out why this is, and from the best I can tell, it seems like it has something to do with one of the MIDI controllers needing to be reassigned.

    The pitch bend wheel works fine to bend the pitch on other patches, but for the Symphony Orchestra Jam pack, it doesn't do anything.

    In case this helps, I tried recording with the pitch bend/expression wheel on one of the Symphony Orchestra string sounds in GarageBand, and although there's no difference in volume when I turn the wheel as I record, I do hear the expression once I rewind and listen to the recording. So apparently it's recording the signal (at least in Garageband), but somehow I can't hear it when I'm performing. I'm not sure if the same is true in Logic.

    Any help would be greatly appreciatedI need to use those sounds for the score, and I don't have too much time before I need to get started. Thanks!

    DB:2.73:Need Help With Problem Using Pitch Bend Wheel In Logic 8 78

    Open the symphony orch instruments in exs24, if they're currently simple garageband instruments just change the plugin to exs24 and it'll "promote" the instrument to the bigger sample player, and here you'll find you can adjust the pitch range and change a whole host of other parameters.

    That help?

    Steve

  • RELEVANCY SCORE 2.73

    DB:2.73:Mail Does Not Respond 8k


    HiUpgraded recently to OSX 10.8.5Mail does not respond , spinning wheel and then impossible to get our "Mail does not respond i.e. need to kill the applicationI tried to pu t com.apple.mail to trash : no effect.Impossible to time machine Mail Any ideas? ThksGdem

    DB:2.73:Mail Does Not Respond 8k

    Thank you very much. Mail is working againBestGdem

  • RELEVANCY SCORE 2.70

    DB:2.70:A Strange Effect With Pitch Bend kz


    I want to make a pitch bend (portamento) that lowers the tone from A to G, i.e. a double half tone. I use my PC keyboard to create the pitch bend. I press the H key and then the 1 key and then I depress the H key. I do this in a separate track and then edit the result into the track in the position where I want the pitch bend to be. However, I have observed the following when I play that track:- The pitch bend lowers the tone by only one half tone.- However, I can make the pitch bend lower the tone a double half tone by opening any menu in Garageband using the left mouse key and just keeping that menu open for as long as the pitch bend lasts.Does anyone understand what's going on?I have Garageband '09 and I've just started using it.

    DB:2.70:A Strange Effect With Pitch Bend kz

    I want to make a pitch bend (portamento) that lowers the tone from A to G, i.e. a double half tone. I use my PC keyboard to create the pitch bend. I press the H key and then the 1 key and then I depress the H key. I do this in a separate track and then edit the result into the track in the position where I want the pitch bend to be. However, I have observed the following when I play that track:- The pitch bend lowers the tone by only one half tone.- However, I can make the pitch bend lower the tone a double half tone by opening any menu in Garageband using the left mouse key and just keeping that menu open for as long as the pitch bend lasts.Does anyone understand what's going on?I have Garageband '09 and I've just started using it.

  • RELEVANCY SCORE 2.69

    DB:2.69:Mainstage 3.X From 2.X Drum Questions... pk


    Hey MS3 gang, I'm using multiple channel strips with lots of drums -- in Mainstage 2.XX, I could load the drums as EXS samples and then detune/retune them by adjusting the pitch bend range (accessible on the EXS edit screen) -- on each channel strip. With the 3.XX upgrade, we get an additional library of drum kits. Does anyone know: Is there any way to load the new drum kits and still access the pitch bend parameters of the EXS editor? With the new 3.0 drums, I can only get/see the new interface showing a drum kit set up on a rug...If i try to access any new drum kits through the EXS, sampler, I can't find the new kits anywhere...Also, the drum kits and the image show one drum configuration w. 1 bass drum, 1 tom, and a couple floor toms. Is there any way to add cymbals, toms, cowbell, etc... or am I completely misunderstanding the new UI? thx in advance for any help -- lipp

    DB:2.69:Mainstage 3.X From 2.X Drum Questions... pk

    Hey CCT! -- Thanks so much -- it's working great...and thanks for the drum kit configuration clarification...I do have another question about drums and damping that you may be able to answer, but I'll post it as a new topic, since others may not see it buried here --thanks again for your help and have a great holiday -- Lipp

  • RELEVANCY SCORE 2.69

    DB:2.69:How Do I Edit Pitch Bend Midi Data? 9j


    I have used the pitch bend wheel on my external keyboard while recording to bend the pitches of the samples on the EXS24. Is it possible to edit this MIDI data in Logic? I can't seem to find it in any track automation or in the matrix edit window. Editing the data in the event list window seems like a disaster (or maybe it's not that bad and I just don't know how to do it).

    What I would like is to be able to apply pitch bend using a similar interface as track automation, being able to create points and curves and what not. That would be ideal. Any thoughts on the matter? Thanks.

    DB:2.69:How Do I Edit Pitch Bend Midi Data? 9j

    Great! I can't believe I didn't see that before in the view menu of the Matrix window. That's exactly what I am looking for. Thanks!

  • RELEVANCY SCORE 2.66

    DB:2.66:Pitch Bend? ff


    Can anyone help me?
    I can't, for the life of me, get the pitch bend to work.
    I have the EXS24 sampler open, and I can't get that to work. I've tried everything!

    DB:2.66:Pitch Bend? ff

    Brad

    does your exs24 intrument have a pich bend range associated with it?
    If so, try Donald's idea, also, record some notes, and in the piano roll editor draw your own pitch bend curves. If it bends, then your controller is at fault.
    Best

    http://www.realworldremixed.com/remixer.php?remixer_id=v8k7o6MtnPQeUMTPCsc.

    Steve

  • RELEVANCY SCORE 2.66

    DB:2.66:Mod Wheel Difficulties kp


    Hi there,

    Im getting more into the modwheel aspects of software such as Garritan and EastWest Gold Symphonic Orchestra but my keyboard doesnt have a mod wheel or a pitch wheel

    So

    1. Can I buy an external stand alone mod wheel that plugs in as a usb midi device? Does anyone know anywhere that might have this?
    2. If not then is there a virtual mod wheel plug in I could use, or is it possible to edit all the midi information sent from the mod wheel using automation data in Logic? I notice Garritan has a virtual mod wheel, is there a plug in that could be downloaded to use with EastWest?
    3. My ancient keyboard has a pitch wheel but its spring loaded, is it worth getting this out and trying to assign it as a mod wheel or is it just not worth it? (plus its only 2 octaves.
    4. My keyboard is a really expensive full scale fully weighted stage piano so Im reluctant, actually cant afford a full size mod wheel one, should I get a small keyboard with a mod wheel and use this after inputting the notes on the other keyboard or is that not worth it either?
    5. Can anyone recommend any other solutions to my problem or a really good cheap midi controller keyboard?

    Thanks for any help anyone can give! Im really worried that I dont really have an easy way out here without buying a new keyboard :s.

    All the best,

    Blair

    iMac G5 2.1 Power pc 1.5 Gb Ram Mac OS X (10.4.9)

    DB:2.66:Mod Wheel Difficulties kp

    Hi there,

    Im getting more into the modwheel aspects of software such as Garritan and EastWest Gold Symphonic Orchestra but my keyboard doesnt have a mod wheel or a pitch wheel

    So

    1. Can I buy an external stand alone mod wheel that plugs in as a usb midi device? Does anyone know anywhere that might have this?
    2. If not then is there a virtual mod wheel plug in I could use, or is it possible to edit all the midi information sent from the mod wheel using automation data in Logic? I notice Garritan has a virtual mod wheel, is there a plug in that could be downloaded to use with EastWest?
    3. My ancient keyboard has a pitch wheel but its spring loaded, is it worth getting this out and trying to assign it as a mod wheel or is it just not worth it? (plus its only 2 octaves.
    4. My keyboard is a really expensive full scale fully weighted stage piano so Im reluctant, actually cant afford a full size mod wheel one, should I get a small keyboard with a mod wheel and use this after inputting the notes on the other keyboard or is that not worth it either?
    5. Can anyone recommend any other solutions to my problem or a really good cheap midi controller keyboard?

    Thanks for any help anyone can give! Im really worried that I dont really have an easy way out here without buying a new keyboard :s.

    All the best,

    Blair

    iMac G5 2.1 Power pc 1.5 Gb Ram Mac OS X (10.4.9)

  • RELEVANCY SCORE 2.66

    DB:2.66:Pitch Bend Controller Data Not Recognized By Instrument Plug-Ins a3


    Am I the only one who has problems to get logics plug-ins to recognize pitch bend controller data? I have a MK-461C evolution USB controller keyboard. I see in the midi in monitor in logic that it receives the data but I don't hear any effect. How the **** do I get the plug-ins to recognize pitch band info???
    I'd be grateful for any help.

    Thomas

    DB:2.66:Pitch Bend Controller Data Not Recognized By Instrument Plug-Ins a3

    Am I the only one who has problems to get logics plug-ins to recognize pitch bend controller data? I have a MK-461C evolution USB controller keyboard. I see in the midi in monitor in logic that it receives the data but I don't hear any effect. How the **** do I get the plug-ins to recognize pitch band info???
    I'd be grateful for any help.

    Thomas

  • RELEVANCY SCORE 2.66

    DB:2.66:How Would I... xp


    Achieve these two effects?
    The first ones are like stutters with pitch bend? How would I do that?

    And then second one, with the piece from Rihanna's Umbrella, there's a pitch bend and then the last song I assume has a pitch bend? How would I achieve these 2 different effects (stutter w/ pitch bend and plain pitch bend) with Logic Pro?

    http://bradlowentertainment.com/help.mp3

    DB:2.66:How Would I... xp

    Yeah, but you'd have to cut the word up first, save a copy to disk and then load it back into the EXS 24 manually.

    And no, Logic 8 unfortunately won't do the DJ brake thing .

    Here a quick video tutorial on loading samples ( don't blame me for the voice, I never made it) :

    http://www.youtube.com/watch?v=jBVq2GwIQfI

  • RELEVANCY SCORE 2.65

    DB:2.65:When Recording The Pitchbend Works But When I Play It Back It Doesn't! mm


    Hello everybody!

    I have some problems with recording samples when I bend the pitch.
    I chop samples up and put them in my on screen keyboard.
    When I record I often pitch bend these samples to fit the tone or bpm.
    But when I play back the pitch seems unchanged.
    It doesn't happen all the time so it's really annoying cause I don't know
    what I'm doing wrong or right!
    Please help me!
    Thanx!

    DB:2.65:When Recording The Pitchbend Works But When I Play It Back It Doesn't! mm

    just figured it out by accident (i think)

    when you record with pitchbend (i did with a midi controller) open the edit track with the scissor button

    in that click the pulldown-bar where it says view, and select pitchbend

    i didn't have to touch anything in there, but once i selected it, my playback recognized it

    hope this helps!

  • RELEVANCY SCORE 2.64

    DB:2.64:Scroll Wheel Error, Help Requested. 9z


    My the pause/play button on my scroll wheel only works when I push really hard on it.
    If I press at it with the same power as I press at the other buttons it won't respond. Sometimes it doesn't respond at all.
    I think it's broken because the button didn't act like this yesterday.....
    Does anyone know what I have to do?

    DB:2.64:Scroll Wheel Error, Help Requested. 9z

    Thanks for your reply,
    I tried all the 5 R's, but it didn't solved the problem,
    that's why I posted and looked around on the forum.
    I didn't bought my I-pod directly from Apple but from an
    (authorised) dutch company.
    Can I contact Apple or should I contact the company
    from wich I bought my I-pod?

  • RELEVANCY SCORE 2.64

    DB:2.64:Bend Midi Pitch While Playback Midi Files 93


    is it possible to bend the midi music pitch while playing back a midi file with multiple tracks?

    Edited by: toyse on Jan 10, 2008 4:50 PM

    DB:2.64:Bend Midi Pitch While Playback Midi Files 93

    is it possible to bend the midi music pitch while playing back a midi file with multiple tracks?

    Edited by: toyse on Jan 10, 2008 4:50 PM

  • RELEVANCY SCORE 2.64

    DB:2.64:Can't Get M-Audio Keystation 49e To Work 3d


    Hi everyone i'm having a lot of trouble getting the keystation 49e to work with logic pro 9. When I plug the keyboard into my macbook I can only play sounds through the virtual keyboard (hitting caps lock), however logic recognizes the when move the volume slider and when I play a note on the virtual keyboard logic I am able to bend the pitch using the pitch bend wheel. I can not play sounds with the keys on the key station though. logic recognizes the volume slider along with the pitch bend and modulation wheel, but I when i press the keys on the keyboard nothing happens. Anyone have any solutions?
    Thanks

    DB:2.64:Can't Get M-Audio Keystation 49e To Work 3d

    Have you already checked your preferences to insure your macbook is selected as your input device? Are you sure your keyboard isn't trying to play very high or very low octaves of where the instrument normally plays? Check the keyboard at higher and lower octave ranges.
    I find that most problems I have with midi keyboards are solved by closing Logic and restarting the computer.

  • RELEVANCY SCORE 2.64

    DB:2.64:Are There Any Live Musicians Here For My Pitch Bend Question?? m7


    C'MON,THERE MUST BE SOME MUSICIANS USI NG THIS PROGRAM THAT HAVE HAD THIS TROUBLE, ANYBODY??????????????

  • RELEVANCY SCORE 2.64

    DB:2.64:My Ipad Does Not Respond To Anything. The Little Wheel In The Middle Of The Screen Has Been Turning For 10 Hours Now. I Tried Pushing All Buttons (Holding Them Long) And Connecting To Power. No Response. 3j


    My IPAD does not respond to anything. The little wheel in the middle of the screen has been turning for 10 hours now. I tried pushing all buttons (holding them long) and connecting to power. No response.

  • RELEVANCY SCORE 2.64

    DB:2.64:Pitch Requirements 77



    Does imsdk require mfxFrameSurface1::mfxFrameData::Pitch to be a multiple of 16/32? Or it can be any value = Width * bytes_per_pixel?

    DB:2.64:Pitch Requirements 77


    Is Width = 544, Pitch = 560 allowed?

  • RELEVANCY SCORE 2.64

    DB:2.64:M-Audio 88es Pitch Bend z9


    Hi - I'm using GarageBand 2 with an M-Audio 88es. It works great, but I've hit a brick wall with trying to program the pitch bend on the thing! Has anybody else had any success with this?

    FYI, it says in the manual 'by assigning function 128 to either the Modulation Wheel or the Volume Slider you can alter the Pitch Bend function up to one octave'. All well and good, but it doesn't say how to alter the pitch bend function once you've done this.

    Anyone else had any more success here? It's driving me nuts!

    K

    DB:2.64:M-Audio 88es Pitch Bend z9

    Hi - I'm using GarageBand 2 with an M-Audio 88es. It works great, but I've hit a brick wall with trying to program the pitch bend on the thing! Has anybody else had any success with this?

    FYI, it says in the manual 'by assigning function 128 to either the Modulation Wheel or the Volume Slider you can alter the Pitch Bend function up to one octave'. All well and good, but it doesn't say how to alter the pitch bend function once you've done this.

    Anyone else had any more success here? It's driving me nuts!

    K

  • RELEVANCY SCORE 2.64

    DB:2.64:Non Responsive Click Wheel dp


    Hi can someone help me please?

    I have had my ipod mini for 17 months so it is out of warranty. The click wheel is unresponsive. I have tried the 5 R's but no success.

    When I toggle the hold switch the screen comes up but the wheel/select button is non responsive. I have tried to reset a few times by holding select and menu, the apple logo comes up but then the screen goes blank. The menu comes up again only when I toggle the hold button but again the wheel/select button does not respond.

    I have itunes 7.02 and ipod software version 1.4.1. I have tried to restore the ipod twice now. The only screen I get now when I toggle the hold button is the choose language screen. The wheel/select button still do not respond.

    Any suggestions anyone?

    toshiba satelite pro Windows XP

  • RELEVANCY SCORE 2.64

    DB:2.64:Re: How To Bend A A Flat Part? km


    I hope someone out there can tell me why this will not work.
    I have a flat part which I want to bend, when I try the bend command I get an error. Does bend not work with one part?
    What we did is backwards in that we have a flat pattern of the part and now need to bend them along a line, how can I do this? Thanks Fred

    DB:2.64:Re: How To Bend A A Flat Part? km

    Good to know.

    Personally, I'd like to see a dialog come up when converting from solid to
    sheetmetal.

    Should have at least 2 options: shell to ask you for removal surfaces and
    thickness or automatic conversion to thickness defined in the styles dialog
    or one of your choice. If we dig a little further, IV should be able to
    identify the thickness and suggest the value. If changed, styles should be
    changed as well.

    I wonder where I've seen that......

    --
    Rui

    "stevensf" wrote in message
    news:20787957.1084976097923.JavaMail.jive@jiveforu​m1.autodesk.com...
    Thanks Kent and Rui
    I had the 'Thickness' at default of .125 and when changed to .02 it
    worked.
    Fred

  • RELEVANCY SCORE 2.63

    DB:2.63:Values Get 'Stuck' When Using Hyper Editor And Affect All Notes fx


    I'm not sure if these are bugs or if I'm misunderstanding something about the Hyper Editor. When I edit something in the Hyper Editor, for example the modulation or pitch bend, two things tend to occur:1) The value gets stuck. For example, if I draw a pitch bend bar for one note, and then erase the bar, the pitch is still bent.2) Changing the value for something affects all other notes on that track. For example, if I draw a pitch bend bar for one note on that track, it affects the pitch of all other notes on that track, including any notes before it.Thanks for any help.

    DB:2.63:Values Get 'Stuck' When Using Hyper Editor And Affect All Notes fx

    There's a couple of settings you might want to look at.....Settings/MIDI/Chase.... You can try selecting "Send Full MIDI Reset Before Chasing"Also.... Preferences/MIDI/Reset Messages Select "Send Used Instrument Settings on Reset"Not sure about the results, I don't use these and tend to enter all required MIDI commands in the sequence rather than relying on a "setting".Remember, "Settings" are per song "Preferences are Global and affect all past and future projects"

  • RELEVANCY SCORE 2.63

    DB:2.63:Pitch Bend Not Working ka


    hi I have an evolution mk461c usb midi controller.
    when I play any software synth in logic 8 I can use the mod wheel (c23) and it works but the pitch bend (c22) doesnt. I can see midi data coming in on channel 22 but ut has no effect. any ideas?
    best tommy banana

    DB:2.63:Pitch Bend Not Working ka

    hi I have an evolution mk461c usb midi controller.
    when I play any software synth in logic 8 I can use the mod wheel (c23) and it works but the pitch bend (c22) doesnt. I can see midi data coming in on channel 22 but ut has no effect. any ideas?
    best tommy banana

  • RELEVANCY SCORE 2.63

    DB:2.63:Logic And Eastwest Play Vst 83


    Just started using EastWest Play Complete Composers Collection with Logic 9.1.1.

    I had a lot of memory issues running Play, and after a lot of experimenting have got things working better by doing the following:

    1. Chosen a "Lite" sample set (uses half as many samples)
    2. Switched off the plugin's convolution reverb
    3. Upped Logic's buffer setting to 1024

    I have filtered out Channel Pressure, Pitch Bend and Aftertouch in an attempt to avoid the other issue I was having: every now and again there were weird pitch wobbles.

    However I have still noticed some anomilies, occasionally playback sounds like as if its changing speed/pitch slightly (like a tape reel slipping on an old multitrack).

    Is this a streaming issue or some MIDI issue?

    Incidentally I tried using Play as standalone app linked via IAC driver but this seemed to overload the processor, as pressing a piano key in Logic did nothing for several seconds then I would get a distorted jerky plaback. I thought it was a MIDI loop so checked the clicks and ports to makes sure. Any idea why this does not work?

    *Setup: iMac 2008 (2.4GHz Intel Core 2 Duo, 4GB Ram, at least 120GB free HD Space, External Firewire 800 Drive with Samples Stored)*

    DB:2.63:Logic And Eastwest Play Vst 83

    Pianos Gold
    Orchestra Gold
    Symphonic Choirs
    RA
    Goliath
    Voices Of Passion
    Storm Drum 2

  • RELEVANCY SCORE 2.60

    DB:2.60:Changing Drum Sounds... zp


    When I have my Midi controller keyboard hooked up to the computer, it seems like I can only access 1 sound of drums. I might want my snare drum to be a higher pitch or a different sound in cymbals etc. How can I change the sounds of the drums? I am not referring to using the pitch bend wheel on the M-Audio keyboard either. If you scroll through all the drum loops or kits you will hear different sounding drums. How can I get those same sounds through the midi keyboard so I can tap out my own pattern?

    DB:2.60:Changing Drum Sounds... zp

    True. Although I wrote to them about it once, and they wrote back saying they didn't care, UNLESS I got signed by Sony Records or something like that. LOL

  • RELEVANCY SCORE 2.60

    DB:2.60:"Feedback" Noise From Yamaha Wx5 ... How To Fix? z8


    I have my Yamaha WX5 EWI hooked up through a USB MIDI to my MacBook Pro (OSX 7.3.1) and running Logic. Several software instruments (i.e. Pop Strings, but many others) start a low, feedback-like rumbling as soon as I start playing. No idea why ... the basic synth that shows up when I do "New Track - Software Instrument" doesn't have this problem.Some fiddling around discovered that the pitch bend wheel causes the same "feedback" when pressed down, and a multi-note blast with "feedback" when pressed up.At another user's suggestion I opened the Environment window and it looks like the pitch wheel emits a stream of commands when pressed down (see attached jpeg) that kicks off the "feedback". Any idea what I can do to figure out what the 'feedback' command is, and how I can prevent it? Many of the voices in Logic are not useable for me because of this feedback.

    DB:2.60:"Feedback" Noise From Yamaha Wx5 ... How To Fix? z8

    The other thing to look at... make sure "Follow Hold" is not on.

  • RELEVANCY SCORE 2.60

    DB:2.60:Pitch Bend Won't Work On Garageband 7p


    I'm having a problem with the pitchbend for an individual track, and the weird thing is that it works sometimes and other times it doesn't. i'm going to pitchbend on the bottom track info and creating the dots up and down, but when i play the track the sound is not bending up or down with the pitch. also my midi axiom keyboard is not bending the pitch when i move the wheel up and down either. none of it makes any sense. could there be a problem with the software?

    DB:2.60:Pitch Bend Won't Work On Garageband 7p

    I'm having a problem with the pitchbend for an individual track, and the weird thing is that it works sometimes and other times it doesn't. i'm going to pitchbend on the bottom track info and creating the dots up and down, but when i play the track the sound is not bending up or down with the pitch. also my midi axiom keyboard is not bending the pitch when i move the wheel up and down either. none of it makes any sense. could there be a problem with the software?

  • RELEVANCY SCORE 2.59

    DB:2.59:Articulation Works, Then It Doesn't 8x


    I'm running Logic Pro 7.2.3 on MacPro 2.66 with 2 gigs of RAM. I have a cheap evolution Keys 49 Midi keyboard that has pitch bend and modulation wheels. I am using Jam Pack 4 to compose symphony tracks.

    When I create a new Logic song/project, the mod wheel on my keyboard handles articulation perfectly. Using cello as an example, it switches from legato to staccato fine. Here's the problem: When I close or quit the song and return, the mod wheel doesn't function. The cello is locked into legato mode. The transport window shows that Logic is reading the articulation data, but no articulation is heard. I know it's not the keyboard because I can bring the same cello instrument up in Garageband and the articulation works everytime.

    Has anyone had this problem?

    MacPro 2.66 2GB RAM Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

    DB:2.59:Articulation Works, Then It Doesn't 8x

    It's good to know someone else is having a similar problem (if one can call that good!)

    I've been poking around and I've also noticed this: If I create a cello part in Garageband, articulation works everytime I open it. If I take that Garageband song and open it in Logic, articulation still works everytime I open it. The Logic file in this instance is saved as a "Logic Song." I don't know how to tell, but I'm assuming the Logic song is drawing it's sound files from the Garageband song (I don't know how to check that).

    However, if I save the newly created Logic song as a project - with all sound files being copied to folders within a master project folder - articulation does not work when I reopen the file.

    Strange. And frustrating.

    MacPro 2.66 2GB RAM Powerbook 400mhz "Pismo" Mac OS X (10.4.7)

  • RELEVANCY SCORE 2.58

    DB:2.58:How To Pitch Bend In Garage Band W/ M-Audio 61 Keyboard sk


    hello,
    i just purchased the m-audio *keystation 61es* keyboard and want to utilize the *pitch bend* on it so i can do short portementos with garage band software instruments. Anyone know how to do it? I know both the keyboard and garage band allow pitch bend but i cant figure out how to set up the keyboard as the manual seems to be written for the upscale keyboard with the digital numeric window and all the other buttons for setting.
    If nothing else, it seems *garage band allows you to adjust the pitch bend in the track editor* for an individual track. i tried to follow the garage band help instructions but when attempting to adjust a single note in the editor there is nothing to click on to set the key point perameters.
    thanks for any help/
    mike

    DB:2.58:How To Pitch Bend In Garage Band W/ M-Audio 61 Keyboard sk

    meaning, i can only adjust the pitch bend in the edit window of garageband if the voice is one of the instruments that seem to allow pitch bend on the keyboard in the first place.

  • RELEVANCY SCORE 2.57

    DB:2.57:Need Help On How Enlarge The Pitch Bend Range.... fc


    I'd like to know if there is any way to increase the pitch bend automation range, as I find its small range (0-120 or whatever it is) unsatisfactory for the dramatic beat drops I wish to create.

  • RELEVANCY SCORE 2.57

    DB:2.57:Any Info On How To Work With Pitch Bend In Hyper Editor kx


    ...would be very handy. I'm trying to created a drum roll with STUDIO BRUSH KIT in MIDI that starts with a snare hit and lower the pitch of subsequent beats so they create a sort of descending tone to a bass drum kick. Anyone have ideas on this or has anyone done something similar. Thanks

    DB:2.57:Any Info On How To Work With Pitch Bend In Hyper Editor kx

    There are no charts for this kind of thing. Even if there were, every synth is going to respond differently so any chart would only be applicable to the synth it was derived from.Sure, you can start with trying some math, but there's no guarantee that the number will work out. Even if they got you close, you might not end up with a perfect Bb no matter what you do. Suggest that the easiest approach is by trial and error.

  • RELEVANCY SCORE 2.57

    DB:2.57:How To Control Environment Pitch Bend Fader With&Nbsp; Nano Or Other Kontroller? cz


    I use a MIDI guitar controller so I don't have the usual mod and pitch wheels. But I do have Nano Kontrol which is set up for frequently used MIDI continuous controllers (1,7,8,10,11,64, etc) and "learned" Logic functions. It works great!!!

    Is there a way to assign a Kontrol fader or knob to control the on-screen Environement pitch bend fader knob?

  • RELEVANCY SCORE 2.57

    DB:2.57:How Can I Set Up A Mainstage Channel Strip To Recognize Coarse Detune? js


    Can anyone clue me in on how to get Mainstage 2 to recognize coarse detune? Right now I have it set up so that a mainstage channel strip recognizes standard pitch bend messages and I can set the pitch bend range of the associated instrument to 12 (the default for the channel strips appears to be 2), and so standard pitch bend works fine. But when the pitch bend messages I'm sending are coarse detune, I'm getting zip...nada...nuttin -- even when I have set the pitch bend range for the instrument on the channel strip set to 12. I don't want to just offset the pitch by a set amount; I want to use coarse detune to bend the pitch by semitones during a performance. If anyone here has any suggestions or knows how to make this happen, I'd really appreciate your help -- thanks in advance, Lipp

    DB:2.57:How Can I Set Up A Mainstage Channel Strip To Recognize Coarse Detune? js

    HiThere seems to be some confusion here??MIDI Coarse and Fine Tuning messages are MIDI Registered Parameter Numbers (RPN's). Are you expecting Logic/MS Instruments to respond to these messages?Are you expecting MS to 'convert' incoming Pitch Bend messages to these RPN's?If yes, I think you are barking up the wrong tree...Try mapping a control slider/knob DIRECTLY to the Coarse/Fine tuning parameters within the plugin.You may need to make a new knob in Layout mode and MIDI Learn it to incoming MIDI PB messages.I have tried this method and it works (if I correctly understand what you are trying to do?).CCT

  • RELEVANCY SCORE 2.57

    DB:2.57:Undo A Bend 3k


    I imported a midi file (created with TuxGuitar) that had a bend in it (the pitch increased during the note). It sounds terrible - how do I undo it? I deleted the note, and put it back in, but the pitch change is still there. I searched the FAQ for bend and pitch, no luck...

    Thanks,

    j

    DB:2.57:Undo A Bend 3k

    I never did figure this out. It was something to do with the track (imported from midi). I'd add a new note in the same place, it had the same problem, and shifting notes around, the bend stayed in the same place.

    I "fixed" it by creating a new track, splitting the old track into 3 regions - before, during, and after. I copied the before and after regions from the old track to the new, and just entered the notes of "during" by hand...

    j

  • RELEVANCY SCORE 2.57

    DB:2.57:Pitch Bend Restriction 8p


    Where , in Express 8, can I restrict the pitch bend to 1 semitone, when playing a note from a midi controller? I've looked at the 'inspector' column where I would expect to see such a thing - and there's everything but.

    DB:2.57:Pitch Bend Restriction 8p

    Ok Thanks - very helpful. I'll ignore suggestion (1) as the environment is not part of my world.
    But suggestions 2+3 would both be easy to do.

  • RELEVANCY SCORE 2.56

    DB:2.56:Wheel Does Not Respond After Run. f3


    Several times the wheel has not respond after I run. To end the run I click menu but cannot roll down to "end run".
    By disconnecting the sensor the run data is saved. Otherwise the wheel works without problems. (Problem occurs only after a run).
    Is it possible that the lack of reponsiveness is due to moisture (perspiration)?
    Has anyone elso encountered this problem or have any advice.

    DB:2.56:Wheel Does Not Respond After Run. f3

    Several times the wheel has not respond after I run. To end the run I click menu but cannot roll down to "end run".
    By disconnecting the sensor the run data is saved. Otherwise the wheel works without problems. (Problem occurs only after a run).
    Is it possible that the lack of reponsiveness is due to moisture (perspiration)?
    Has anyone elso encountered this problem or have any advice.

  • RELEVANCY SCORE 2.56

    DB:2.56:Pitch Bending Vocals jp


    I would like to pitch bend the last word of a vocal phrase. I am using Express 8 and have a midi keyboard with a pitch bend control. What is the easiest way to do this?

  • RELEVANCY SCORE 2.56

    DB:2.56:Midi Communication d1


    On a scale of 1-10 I would say I have about a level 4 understanding of MIDI so please respond accordingly as you may talk way over my head

    I am using a korg kontrol 49 hooked up through USB mode into Logic8. I also have a yamaha motif XS8 hooked up through a MOTU MIDI interface. On the motif, I can use all of the controls: pitch bend, sustain pedal, modulation. On the korg, I can't get any of them to work. Mainly I would like the sustain pedal to work. Any thoughts?

    DB:2.56:Midi Communication d1

    On a scale of 1-10 I would say I have about a level 4 understanding of MIDI so please respond accordingly as you may talk way over my head

    I am using a korg kontrol 49 hooked up through USB mode into Logic8. I also have a yamaha motif XS8 hooked up through a MOTU MIDI interface. On the motif, I can use all of the controls: pitch bend, sustain pedal, modulation. On the korg, I can't get any of them to work. Mainly I would like the sustain pedal to work. Any thoughts?

  • RELEVANCY SCORE 2.56

    DB:2.56:Trouble Recording Automation For Pitch Bend And Modulation Wheels 17


    Im sorry for such a stupid issue, but I'm having problems with Logic recording both my Pitch Bend and Modulation wheels on my keyboard controller. They work. They just don't record. I have my track either set to Touch or Latch and during playback when I am fiddling with these wheels, the automation data does not get recorded. I went into the Track Automation settings and made sure my Touch/Latch/Write Erase check boxes have been checked (I have all checked except for solo). I don't know if that was the right setting to mess with but it didn't fix it.

    Can anyone please tell me what the problem is and how do I get Logic to record automation data for my keyboard wheels? I'd really appreciate any tips or advice...

  • RELEVANCY SCORE 2.56

    DB:2.56:Timpani In Garage Band Constantly Disappearing... kd


    Hi,

    The Timpani in Garage Band (Sym. Orch) frequently dissapears on playback of a given file. I have to constantly go to the Pitch Wheel on my controller and reset it to access an audible sample layer - which is annoying.

    Why does this happen how might I avoid this problem?

    Thanks,
    Joseph

    G5-iMac Mac OS X (10.4.3) Logic PRO 7

    DB:2.56:Timpani In Garage Band Constantly Disappearing... kd

    Hi,

    The Timpani in Garage Band (Sym. Orch) frequently dissapears on playback of a given file. I have to constantly go to the Pitch Wheel on my controller and reset it to access an audible sample layer - which is annoying.

    Why does this happen how might I avoid this problem?

    Thanks,
    Joseph

    G5-iMac Mac OS X (10.4.3) Logic PRO 7

  • RELEVANCY SCORE 2.56

    DB:2.56:How Do You Stop Midi Controller From Switching Screensets? 1m


    Yesterday i loaded some projects from logic 7 and all of the sudden when i hit certain notes on my keyboard controller it started to switch through screent sets and my pitch bend was also sending messages to my Mackie control. Does anyone know how to stop that behavior? Im assuming somehow in my enviorment something was altered.

    DB:2.56:How Do You Stop Midi Controller From Switching Screensets? 1m

    Yesterday i loaded some projects from logic 7 and all of the sudden when i hit certain notes on my keyboard controller it started to switch through screent sets and my pitch bend was also sending messages to my Mackie control. Does anyone know how to stop that behavior? Im assuming somehow in my enviorment something was altered.

  • RELEVANCY SCORE 2.55

    DB:2.55:Strangeness When Having More Than One Modulation Object In The Layout 71


    I get strange behavior on the modulation wheel shelf control when using more than one midi channel.

    Example:

    - Start Mainstage.
    - Open a blank project, like Keyboard starter.
    - Drag two mod/pitch wheel objects to the layout. "Learn" them to respond to modulation wheel (Midi CC#1) on midichannel 1 and 2 respectively.
    - Make sure Midi Thru is set to automatic [1].
    - Now check that it works. Sending modulation wheel on midi channel 1 will move one of the wheels, sending on midi channel two will move the other one. Fine.
    - Go to Edit mode; very strange if I send modulation on channel 1 both will move. In some cases the other way round.

    I get similar behavior on other midi CC's (like expression, CC#11) that are sent through directly to the plugins. That is, those that are marked "Same as input" in the parameter mapping.

    Adding more channels makes it even more confusing. Mostly at least two of the modulation wheels will move although I'm only sending on one channel.

    In layout mode all works the way one would expect.

    I know these controls aren't really needed they are merely a visual yet helpful aid but why this strange behavior? Is it a bug or a feature I don't understand?

    ----------footnote:
    [1] This is the normal way to set things up. The modulation wheel object is not assigned to anything it just sends through CC#1 to the plugin instrument.

    DB:2.55:Strangeness When Having More Than One Modulation Object In The Layout 71

    It sounds as though you have a routing error somewhere. How many mod wheels do you use to send messages from your hardware?

  • RELEVANCY SCORE 2.53

    DB:2.53:Pitch Bend 1d


    I'm not getting any response from the pitch bend on my roland xv-88 keyboard when playing v irtual instruments in logic pro.The modulations work when i push the wheel up,but when doing a pitch bend it only increases the volume up and down.The boxes in all the instruments i have tried show pitch bend thennumber of notes to bend,but nothing works.The roland is set and works ok alone and with digital performer and garage band.what am i doing wrong?

    DB:2.53:Pitch Bend 1d

    Frank, that did it,that made the fix,thanks several millions,made my day,i owe ya, its workin GREAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • RELEVANCY SCORE 2.53

    DB:2.53:Iskin j3


    does any1 have iskins? does the click wheel respond even with the cover on it?

    DB:2.53:Iskin j3

    after what happened yesterday if i was you i would definetly buy an iskin duo. ok i was on my bike and i got hit by a car and my ipod was in my pocket with the iskin duo on it and the ipod hit the hood of the car and then landed on the ground and i looked at the ipod it was still playing the music and it worked mint and there wasnt a scratch on it. whether the iskin looks bulky or not id say its worth it cause my ipod would have been in pieces if it hadnt been for this case.

  • RELEVANCY SCORE 2.52

    DB:2.52:Does Your One Bend? ds


    So seeing all these reports of how easy it is to bend the iPhone 6 plus while in your pants, has anyone had any experience of the One bending as well?

    DB:2.52:Does Your One Bend? ds

    What he said above, I am waiting for a deluge of recalls to hit them hard.

  • RELEVANCY SCORE 2.51

    DB:2.51:Why Doesn't Application Manager Not Respond, Just Get A Spinning Wheel cj



    why doesn't application manager not respond, just get a spinning wheel?

    DB:2.51:Why Doesn't Application Manager Not Respond, Just Get A Spinning Wheel cj


    Welcome to Adobe Forum,

    You can follow the steps in:

    http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launchin g-cc.html

    Other related threads:

    http://forums.adobe.com/message/5468864 (spinning blue wheel)

    http://forums.adobe.com/message/5469306

    Please follow the steps in:

    CC Spinning Blue Wheel under 'Home' or 'Apps'?

    Creative Cloud Desktop App stuck on blue spinning wheel after update.

    Regards,

    Rajshree

  • RELEVANCY SCORE 2.51

    DB:2.51:Hyperdraw Display Problem In Arrange Window p7


    Anyone tried using Hyperdraw on a midi part in the arrange window yet?

    I tried it and for some reason it's not displaying correctly as it would in 7.

    Say you select pitch bend: it says pitch bend is selected on the midi event but there are no pitch bend events displayed even if you have created pitch bend events in the piano roll editor.

    Anyone else experienced this? Bug perhaps?

    DB:2.51:Hyperdraw Display Problem In Arrange Window p7

    Seems to work fine here. Is this a newly created L8 project...or an imported L7 song?

    best,
    Jon

  • RELEVANCY SCORE 2.50

    DB:2.50:Microtonal 77


    Hi,I found this post that it's very useful but I have some questions, maybe someone could answer me:https://discussions.apple.com/thread/1895803?start=0tstart=01) I made some tests and the pitch bend affects every midi channel in a track...is this normal?2) How was the quarter tone amount calculated?3) I could find the pitch bend in exs but not in other sofware instruments...Thanks in advance

    DB:2.50:Microtonal 77

    Ok, if you find a solution please let me know.Thanks in advance!BestK

  • RELEVANCY SCORE 2.50

    DB:2.50:Ipod Wheel Not Working mx


    The wheel on my ipod will not respond to touch or responds intermittently. I have two and it's happening with both of them. I'm trying to figure out if it's a mechanical problem or a software problem. I notice the lower the battery is the worse the problem. I can click the wheel but I can't navigate menus or control volume. I have tried resetting it but that does nothing. Help!

    DB:2.50:Ipod Wheel Not Working mx

    Probably a hardware problem then...just thought it was weird that I would have the same problemwith both. Thanks!

  • RELEVANCY SCORE 2.49

    DB:2.49:Good Bpm Analyzer 91


    Trying to beat match those songs really accurate. Found a tool called MixMeister BPM analyser. It works so good you don't have to bend the pitch to keep them in sync that often.

    DB:2.49:Good Bpm Analyzer 91

    Trying to beat match those songs really accurate. Found a tool called MixMeister BPM analyser. It works so good you don't have to bend the pitch to keep them in sync that often.

  • RELEVANCY SCORE 2.49

    DB:2.49:Event Type Descriptions - Mod Wheel / Quick Access Auto Help zs


    I really just need some description for the possible event types you can assign to controllers in logic, like the mod wheel. For example, expression, portamento time... I don't know what i should be listening for when it comes to utilizing these controls. But I know some of these options would greatly enhance my samples (EWQLSO) in terms of reality (strings swelling instead of remaining stagnant). The manual mentions around 15 event types, and I was wondering if I could get some solid definitions. Some are obvious, but feel free to fill in the gaps, it would be much appreciated.

    Also, I've had some trouble getting mod-wheel movement to show up in multiple windows in logic. Even if I do automation quick access assigned to the mod wheel, I get split information. For instance, the Arrange Window will record pitch bend data, but it will not be reflected in the Event List, or Editor, let alone these options in the Matrix window.

    Any help would be great.

    DB:2.49:Event Type Descriptions - Mod Wheel / Quick Access Auto Help zs

    I really just need some description for the possible event types you can assign to controllers in logic, like the mod wheel. For example, expression, portamento time... I don't know what i should be listening for when it comes to utilizing these controls. But I know some of these options would greatly enhance my samples (EWQLSO) in terms of reality (strings swelling instead of remaining stagnant). The manual mentions around 15 event types, and I was wondering if I could get some solid definitions. Some are obvious, but feel free to fill in the gaps, it would be much appreciated.

    Also, I've had some trouble getting mod-wheel movement to show up in multiple windows in logic. Even if I do automation quick access assigned to the mod wheel, I get split information. For instance, the Arrange Window will record pitch bend data, but it will not be reflected in the Event List, or Editor, let alone these options in the Matrix window.

    Any help would be great.

  • RELEVANCY SCORE 2.49

    DB:2.49:Cannot Send Eps File Via Mail. Just Crashes. 7p


    Everytime I try and attach an eps to a message
    the spinning wheel appears and mail does not respond.
    I have to force quit mail everytime.

    DB:2.49:Cannot Send Eps File Via Mail. Just Crashes. 7p

    Had to re-install Tiger after a crash. Worked fine after this.

  • RELEVANCY SCORE 2.49

    DB:2.49:Re: Can Not Bend fx


    I have this part one step from completion. The last step is to bend into an elbow until the cut-out sides meet. Inventor is looking for a face to start the bend. How do I go about about a line in space and does not lay on the part? Need about a .5 inch radius. Thanks.

    DB:2.49:Re: Can Not Bend fx

    Attached.
    Inventor Professional 2008









    Attachments:






    Re-EnforcementElbow.zip ‏594 KB

  • RELEVANCY SCORE 2.49

    DB:2.49:Dj Mixing Applications. N97 a7


    Anybody know of any out now or coming soon. Even something that gives me the ability to turn my n97 into another turntable by having a bpm counter, pitch bend and fx facilities. Im sure something like this would be possible but does anyone know of anything. Btw just thought i would say hi as im new to here.

  • RELEVANCY SCORE 2.48

    DB:2.48:High Pitch Whine xc


    I get a high pitch whine out of the hear piece when the phone is on, does anyone else get this .

    DB:2.48:High Pitch Whine xc

    The. Noise I get is when the phone is on standby, and without it pluged in. Has anyone had the same problem?

  • RELEVANCY SCORE 2.48

    DB:2.48:Setting Lfo To Control Filter Cut Off.. Help jc


    Hello,
    Can anyone explain how I can set the LFO to control the filter cut-off in the EXS24 and ES1. I want to be able to control this using the pitch bend knob on my midi keyboard.
    Many thanks in advance.

    20" intel imac Mac OS X (10.4.8)

    DB:2.48:Setting Lfo To Control Filter Cut Off.. Help jc

    Thanks Bee Jay, this was very helpful. You explained it very clearly and it worked just as I was hoping.

    20" intel imac Mac OS X (10.4.6)

  • RELEVANCY SCORE 2.47

    DB:2.47:Ipod Nano Will Not Respond xp


    I have tried messing with the hold switch, it does respond with the lock symbol on and off. I have reset it several times with power on and off. It is recognized in itunes and I restored it there. The click wheel is non-responsive.

    DB:2.47:Ipod Nano Will Not Respond xp

    I have tried messing with the hold switch, it does respond with the lock symbol on and off. I have reset it several times with power on and off. It is recognized in itunes and I restored it there. The click wheel is non-responsive.

  • RELEVANCY SCORE 2.46

    DB:2.46:How Far Backwards Does The Laptop Bend? 8s



    how far does the HP Pavilion 14-n223tx TouchSmart bend backwards?

    DB:2.46:How Far Backwards Does The Laptop Bend? 8s


    Until it breaks....seriously, where is yours stopping and where did you think it would stop?

  • RELEVANCY SCORE 2.46

    DB:2.46:How Do I Set Pitchbend For Soniis 9a


    How do I set pitchbend in Logic on an Instrument track.

    G2M Universal Guitar to MIDI Converter

    http://www.sonuus.com/products.html

    "For pitch-bend, the commonest setting
    for most MIDI devices is for full-scale
    pitch-bend to represent 2 semitones,
    and the G2M is also set to this range.
    To ensure your MIDI sounds are correctly
    in tune with your guitar, ensure the MIDI
    patch you use is also set to a pitch-bend
    range of 2 semitones."

    Also how would I set pitchbend to Chromatic?

    Thanks

    DB:2.46:How Do I Set Pitchbend For Soniis 9a

    How do I set pitchbend in Logic on an Instrument track.

    G2M Universal Guitar to MIDI Converter

    http://www.sonuus.com/products.html

    "For pitch-bend, the commonest setting
    for most MIDI devices is for full-scale
    pitch-bend to represent 2 semitones,
    and the G2M is also set to this range.
    To ensure your MIDI sounds are correctly
    in tune with your guitar, ensure the MIDI
    patch you use is also set to a pitch-bend
    range of 2 semitones."

    Also how would I set pitchbend to Chromatic?

    Thanks

  • RELEVANCY SCORE 2.46

    DB:2.46:2 Channel Xfader Control. 8d


    I made a 2 channel xFader. For now I can control it by selecting Modulation from the menu. I use Roland D-50 and it's more convenient to use the Pitch bend function of the joystic. Yes, but I don't see such an option in the menu. Or maybe it's under a different name. Does anyone knows which one of the rest 127 options it could be?

    DB:2.46:2 Channel Xfader Control. 8d

    Well, the solution is far more simple as yours. There is no need to make transformer from Modulation to PitchBend. I just had to select PitchBd as input control instead of Control. Let's keep it simple.

  • RELEVANCY SCORE 2.46

    DB:2.46:Map Mod &Amp; Pitch Wheel To Ctrl. 4 &Amp; 11 Greyed Out! 3k


    I've been trying to edit my Orchestral Template in LP9 using the GB Jam Pack Orchstral instruments and other libraries. When I try to edit some of the other EXS instruments to respond to the mod and pitch wheel like the GB Orch instruments, the "Map Mod amp; Pitch Wheel to Ctrl. 4 amp; 11" is greyed out and I can't change it. Also, in the EXS editor the GB instruments won't allow me to "uncheck" this feature. (I did this in my problem solving experiments) I created this orchestral template with all EXS instruments and would like it if all of the brass, woodwinds, and strings responded the way that the GB Orch instruments respond for crescendo, decrescendo, and articulations. Thanks for any ideas about what's going on!

    DB:2.46:Map Mod &Amp; Pitch Wheel To Ctrl. 4 &Amp; 11 Greyed Out! 3k

    Thanks CCTM! I had to tick "show all" under the groups tab to find the select by control #4. Your help is greatly appreciated! You must be the same CCT from the Logic Pro Files bulliten board. Cheers

  • RELEVANCY SCORE 2.46

    DB:2.46:Midi Record E Bend Data (Pitch) f9



    i have a problem: when I record with my midi guitar, audition dont recognize the pitch changes, such bending or tremolo... can anyone help me?

    DB:2.46:Midi Record E Bend Data (Pitch) f9


    i have a problem: when I record with my midi guitar, audition dont recognize the pitch changes, such bending or tremolo... can anyone help me?

  • RELEVANCY SCORE 2.46

    DB:2.46:Pitch Function In Garage Band Synths Gone With Last Update! Please Correct d9


    Hallo!the Synths in Garage Band have 3 modalities Slide, Scroll and Pitch defining how the intrument behave when sliding your finger on the keyboard.with the last upgrade the PITCH function no longer works smoothly but it's "magnetized" to the next key.so is no longer a "pitch"control but just a slide.this is very disappointing, because is no longer possible to play a vibrato or "bend" a note, wich was the only unique musical and expressive advantage to play on a touchscreen instead of on an actual keyboard!PLEASE CORRECT THIS!thank you

    DB:2.46:Pitch Function In Garage Band Synths Gone With Last Update! Please Correct d9

    Thank you! I submitted the problem to apple feedback..Very good heads up avoiding to install upgrades if not verified!

  • RELEVANCY SCORE 2.46

    DB:2.46:Can You Assign A Oxygen Pitch Wheel Or A Oxygen Knob As A Jog/Scrub Wheel? 31


    i have my asr-10 as my main controler, and my oxygen for others to use and for me to use the knobs to automate. i was wanting to use the oxygen's pitch wheel as a scrub or jog to move the spl back and forth. possible?

    DB:2.46:Can You Assign A Oxygen Pitch Wheel Or A Oxygen Knob As A Jog/Scrub Wheel? 31

    totally the same here. always doing some sort of two to three finger solutes on the keyboard. i was just thinking that i could do something new. thanks for your help.

  • RELEVANCY SCORE 2.46

    DB:2.46:How Do I Even Out The Pitch Bend At The Beginning Of A Note With Midi? zx


    Midi being me not using a keyboard. o.o
    Thanks.

    DB:2.46:How Do I Even Out The Pitch Bend At The Beginning Of A Note With Midi? zx

    Yeah, it's not there.

    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs

    I'm not using a Keyboard either though.

    doesn't matter

  • RELEVANCY SCORE 2.45

    DB:2.45:Use Usb Joystick As Midi Cc? cc


    While I have no knobs on my midi keyboard (no CC's at all, not even pitch bend or mod wheel), I noticed my old usb joystick lying around. The joystick could theoretically (in my mind) be a source of continuous control in 3 ways (x-axis, y-axis, slider). Is there any way that events from my joystick could be translated into midi events? Some kind of software?

    Many thanks in hope,
    Joe

  • RELEVANCY SCORE 2.45

    DB:2.45:Does Mainstage Support Midi Key Mapping? 3c


    I have an older Korg i30 keyboard workstation. It only has MIDI connection (not USB) and have it connected to MainStage via my audio interface. I was wondering if MainStage supports key mappings to older school MIDI keyboards. I attempted mapping the volume fader with zero luck. Only the piano keys and pitch bend map. Any suggestions? I've tried on my Rowland XV-88 as well without any luck.

    DB:2.45:Does Mainstage Support Midi Key Mapping? 3c

    Yeah... it seems that there's some confusion here. Maybe he means patch mapping? Controller mapping?

  • RELEVANCY SCORE 2.44

    DB:2.44:Wheel Does Not Work 8x


    My wheel does not respond, so I'm stuck on one playlist. Has this happened to anyone else? I've used my iPod a lot over the past 3-4 years, so I'm wondering if it is time for a new one, or if there is some trick out there. Thank you for any help you can give.

    DB:2.44:Wheel Does Not Work 8x

    Thank you so much. This worked really well and my wheel is spinning again! I appreciate it.

  • RELEVANCY SCORE 2.44

    DB:2.44:Pitch Bend Question In Logic 9 8a


    Hello,I am a newbie to Logic and have searched for an answer and can't find one. I am trying to automate a pitch bend and it is not working. Here is my setup:Running Kontakt 5 from a software instrument track. Using the factory library in Kontact and selected the string ensemble. What I am trying to do is set a pitch automation in Logic to bend the pitch of a single note from -64 to 63. When I set the pitch automation in Logic, it doesn't affect Kontact at all. The note plays without any pitch bend.Wondering what I have to do to get the bend to work?Running 10.7.5 on a MacBook Pro with no Midi Controller. Please let me know any other info you might need. Thanks in advance!Joe

    DB:2.44:Pitch Bend Question In Logic 9 8a

    Hello,I am a newbie to Logic and have searched for an answer and can't find one. I am trying to automate a pitch bend and it is not working. Here is my setup:Running Kontakt 5 from a software instrument track. Using the factory library in Kontact and selected the string ensemble. What I am trying to do is set a pitch automation in Logic to bend the pitch of a single note from -64 to 63. When I set the pitch automation in Logic, it doesn't affect Kontact at all. The note plays without any pitch bend.Wondering what I have to do to get the bend to work?Running 10.7.5 on a MacBook Pro with no Midi Controller. Please let me know any other info you might need. Thanks in advance!Joe

  • RELEVANCY SCORE 2.44

    DB:2.44:Midi Values Reset 91


    I'm working with a bass track, and I use the pitch wheel to band notes, but when I start in the middle of a bend it will sound all bent out of shape. Is there a way to reset it self the moment I hit play?

    DB:2.44:Midi Values Reset 91

    Is there a way to reset it self the moment I hit play?
    Yes, go to the Project Settings -Midi-Chase and uncheck the Pitch Bend box (which is ticked by default and causes your issue).A.G---------------------------------www.audiogrocery.comAuthor of: Logic GUI Deluxe(Free), Vox De Bulgaria s.a.g.e vocal pack for RMX,Logic Snapshot Console,RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

  • RELEVANCY SCORE 2.44

    DB:2.44:Exs Editor — Previous/Next Instrument 1p


    From LP7 reference, page 560: Previous/Next Instrument and the number fields alongside determine which MIDI event type (and data value) will be used for selection of the previous or next Instrument: Note, Poly Pressure, Control, Program, Channel Pressure, Pitch Bend.

    Does this mean one can switch to another sampler instrument using midi events? Or am I missing something?

    DB:2.44:Exs Editor — Previous/Next Instrument 1p

    It's great information for people using VSL with P/N inst though.

    Cheers

  • RELEVANCY SCORE 2.44

    DB:2.44:Pitch Bending Audio Files In Logic 8... j9


    Hi Guys, my problem is simple; how does one pitch bend audio files within Logic 8? Is it possible? I have noticed that the manual contains only info on midi pitch bend, and although the time and pitch machine can do clever things there seems to be no immediately obvious route to this function.
    Wavelab on my old pc had a quick and simple way of doing this so, as I fear, do I need to invest in an external wave editor for my Mac?

    Hope someone can help

    All the best y'all

    DB:2.44:Pitch Bending Audio Files In Logic 8... j9

    Thanks guys, the links were interesting too, it's seems a shame Logic doesn't have the feature within the time and pitch machine though, so I shall soldier on

    All the best

  • RELEVANCY SCORE 2.44

    DB:2.44:Running 2 Midi Keyboards Into Mainstage - Midi Signals Get Mixed Up s3


    Hi there,

    I'm running two midi keyboards into Mainstage 2 on a Macbook Pro. My midi interface is the Midisport 4x4 Anniversary Edition, and my audio interface is the Metric Halo ULN-2.

    I want to run my setup as if each keyboard was a different sampler, so I've set up each keyboard in Mainstage's layout. Each physical keyboard runs into a different channel on the midisport, and in mainstage, each keyboard has its own sustain pedal, a control pedal, a pitch bend wheel, and a modulation wheel. I linked each physical controller to it's software equivalent by the Learn feature.

    I set up 2 different software instruments in Mainstage one controlled by the first keyboard and the 2nd controlled by the 2nd keyboard.

    The issue is that the sustain pedal, the control pedal, the pitch bend, and the mod wheel of one keyboard affects the sound of the other keyboard's sampler, and vice versa. Do you have any idea why this is, and how to prevent it?