• RELEVANCY SCORE 4.61

    DB:4.61:Msi Eclipse Plus xj







    Hi all...any high hope of a better Plus version than the regular Eclipse?

    DB:4.61:Msi Eclipse Plus xj


    Just having realtime QPI voltage will be a Plus in itself.

  • RELEVANCY SCORE 4.46

    DB:4.46:Msi Eclipse (Problem) zx







    Dear MSI Teams,

    Currently my MSI Eclipse plus was send for RMA. 1st ram slot spoil. 1st sata spoil. But cannot 1 to 1 exchange. And also prblem with the skype.
    Now the distributer loan a MSI Eclipse to me. Now my pc keep restart. WTH!! Supporting MSI so many years and get this !

    Regret to get this MSI Eclipse plus my previous (MSI Eclipse). Going to change ASUS Rampage II. Solid and not much problem compare with MSI Eclipse plus.

    WHAT DO YOU GUYS SAYS???????

    DB:4.46:Msi Eclipse (Problem) zx


    Are you asking for assistance or...? How about giving details about your system to see if you have some component creating this experience. Please give us your complete system specs including the PSU(the brand, model and especially the amps for the +12v rail(s)). Please read the Posting Guide

  • RELEVANCY SCORE 4.35

    DB:4.35:Msi 58 Eclipse Plus Problem. fa







    I just got myself an MSI Eclipse Plus and have the same problem. Help please. The computer worked fine for like a week. Then it started acting weird. At first, any sound stopped playing, then the vga card fan stopped spinning. So I rebooted the computer. (I had it do a check disk before the problem occurred) so the computer did that and rebooted again. This time in complained that there was no harddisk. So I reinserted the SATA wires and rebooted again. Now the computer refuses to boot (the led flashes for 0.5 of a second). Even when I removed all connections except the CPU and the CPU fan, the computer still not boot.

    My comp:
    i7 920
    Western Digital 500GB
    Corsair DDR3 1333
    MSI Geforce 8800GT
    Corsair 750W TX

    DB:4.35:Msi 58 Eclipse Plus Problem. fa


    I doubt the video card had anything to do with damaging a Corsair TX750W. If anything it was defective from the factory and thats pretty rare for Corsair PSUs. I have caused accidental shorts on the PC with my VX450W and it instantly shut down with no damage. Same thing with power surges on the AC in during lightning storms and such it also instantly shuts down with no damage. That Corsair PSU has saved me $$ from nature and myself.

  • RELEVANCY SCORE 4.02

    DB:4.02:Msi Eclipse Sli Sas Support? xc




    Would like to know if the MSI Eclipse SLI supports SAS drives? Some websites say it does some dont specify that it does?

    DB:4.02:Msi Eclipse Sli Sas Support? xc


    Would like to know if the MSI Eclipse SLI supports SAS drives? Some websites say it does some dont specify that it does?

  • RELEVANCY SCORE 3.74

    DB:3.74:Msi Eclipse Audio Card Drivers And Turbo Boost 39




    I have an MSI Eclipse and am using the audio card that comes with it. I no longer have the CD and the ones off the site give me errors when i try to configure. Enhancements are causing problems, click here to disable. Where can i get the full audio drivers other than the CD?

    Also on the board website i have noticed it has a feature called turbo boost. I can not find any information on it. How can i enable this for my drives?

    Thank you.

    DB:3.74:Msi Eclipse Audio Card Drivers And Turbo Boost 39


    You can simply visit the Creative website and download the driver for the X-fi Xtreme Audio.

  • RELEVANCY SCORE 3.67

    DB:3.67:Installed Eclipse 3.4 And Gtk 2.12 And Now Jds Will Not Load. kk


    I recently installed Eclipse 3.4 and when I tried to run it the first time it said I needed GTK. I installed GTK 2.12 plus all of the dependencies from Sunfreeware.com. I tested GTK and it works fine. Eclipse works fine too. However, now I cannot logon to Solaris using the Java Desktop System. It just hangs at a blue screen. CDE works fine. Any ideas?

    DB:3.67:Installed Eclipse 3.4 And Gtk 2.12 And Now Jds Will Not Load. kk

    New_DS_User wrote:
    I recently installed Eclipse 3.4 and when I tried to run it the first time it said I needed GTK. I installed GTK 2.12 plus all of the dependencies from Sunfreeware.com. I tested GTK and it works fine. Eclipse works fine too. However, now I cannot logon to Solaris using the Java Desktop System. It just hangs at a blue screen. CDE works fine. Any ideas?I've never compiled CDE but JDS requires GTK. A newer version in theory should cause no harm but I've seen that version 3 will be a major split with previous versions and will generally break a lot of apps.

    Did you change any environment variables, set any environment variables, and did you install the new version into a different directory hierarchy?

    alan

  • RELEVANCY SCORE 3.44

    DB:3.44:How To Locate The S/N For The Msi Eclipse Without Disassembling The Whole Pc sd




    I am hoping there is a way to locate the serial number for my MSI Eclipse SLI mobo without disassembling it from the pc case (which would require disassembling the ENTIRE pc.

    Does anyone know if there is a way to do this - needed apparently to start a tech support call with MSI - from software or by some other method?

    Is it located anywhere but the rear of the mobo?

    DB:3.44:How To Locate The S/N For The Msi Eclipse Without Disassembling The Whole Pc sd


    Good luck doing that with an Eclipse (using the information on the packaging label)... mine wont work - it says not MSI product when pressing OK.

  • RELEVANCY SCORE 3.44

    DB:3.44:Msi Eclipse Plus Oc Of The Century s1




    Ok, so maybe just of the decade. With the assistance of NASA, I was able to procure a suit designed for deep space exploration. Using NASAs Cold Eco Chamber, I set up my air cooled rig, the liquid helium was converted to a gas pumped into the chamber. Only one screen shot was saved as the system literally froze shut down. Please note the speed, bclk, multiplier before the session was abruptly ended. 10+ was within reach!

  • RELEVANCY SCORE 3.39

    DB:3.39:Question On Remedy Developer Plus And Ars V7.5 z7



    Hi,

    As ARS V7.5 is based on Java Eclipse, does anyone have any information on the status of Remedy Developer Plus with respect to ARS V7.5?

    Thanks.

    Nyall

    DB:3.39:Question On Remedy Developer Plus And Ars V7.5 z7


    Developer Studio is part of AR System 7.5.00 - just like Admin Tool was part of AR System 7.1.00 and prior. So the documentation for Developer Studio can be found in the AR System 7.5.00 documentation:

    http://www.bmc.com/support/hou_Support_ProdVersion/0,3648,19097_19695_158340_0,00.html

    Thanks,

  • RELEVANCY SCORE 3.34

    DB:3.34:Does Msi Eclipse Sli Support d9




    Hi
    i want to know is my mobo MSI ELCIPSE SLI support intel new processer Corei7 2600K or not?

    DB:3.34:Does Msi Eclipse Sli Support d9


    i am really very thank,s full to all of you

  • RELEVANCY SCORE 3.31

    DB:3.31:Moved: Msi Eclipse No Display kp




    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=123984.0

    DB:3.31:Moved: Msi Eclipse No Display kp


    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=123984.0

  • RELEVANCY SCORE 3.30

    DB:3.30:Msi X58 Motherboards: Sli, Availability, Pricing? 93




    Do all MSI X58 motherboards support SLI? Including Platinum, Eclipse and the unamed high end one (Diamond?). Somebody tested X58 Eclipse with two nVidia cards (link below) and it worked it seems.
    http://www.xfastest.com/viewthread.php?tid=14994page=1#pid120285

    Also, what will be the market availability? November-December or Q1 2009? Pricing for North America?

    DB:3.30:Msi X58 Motherboards: Sli, Availability, Pricing? 93


    And more http://www.anandtech.com/showdoc.aspx?i=3395p=2

  • RELEVANCY SCORE 3.26

    DB:3.26:First Look.Msi X58 Eclipse xd




    No heatpipes/heatsinks shown as yet.

    http://www.bit-tech.net/hardware/2008/08/26/early-look-msi-x58-eclipse/1

    DB:3.26:First Look.Msi X58 Eclipse xd


    No heatpipes/heatsinks shown as yet.

    http://www.bit-tech.net/hardware/2008/08/26/early-look-msi-x58-eclipse/1

  • RELEVANCY SCORE 3.25

    DB:3.25:Msi Eclipse Damages Socket k7




    hi
    my eclipse has badly damaged pins in the cpu socket, can the socket be replaced or is it now junk :(
    thanks
    grizz

  • RELEVANCY SCORE 3.25

    DB:3.25:Mai Eclipse Sli Cpu Problem x1




    Just got new i7 970 CPU and for some strange reason the bios setting for turbo boost is greyd out and another thing when I run the msi overclocking tool it reports only 4 cores not 6, in device manager is showe all 12 threads but when I look at the performance manager it shows only 8 threds anyone can suggest anything?

    I am running:
    6x2gb OCD gold 1600
    Intel i7 970
    Msi eclipse sli bios 1.13
    Radeon 5870
    And a few drives

    I replaced intel i7 940 which worked great

    DB:3.25:Mai Eclipse Sli Cpu Problem x1


    Starting to sound like it is CPU/socket related. Sometimes a CPU reseat will help. Uneven downward pressure on the CPU by the cooler can cause these symptoms. The socket pins should probably be very closely inspected for any that may be bent or broken. The CPU contact pads each checked for solid contact. Before pulling the CPU, try with only one stick RAM in the primary (A0) black dimm slot check for results. If you do pull the CPU, be sure to remove the PSU power cord clear CMOS before starting up the system again.

  • RELEVANCY SCORE 3.19

    DB:3.19:Merged: Msi Eclipse Booting Issue Everest Cache And Memory Benchmark sm




    Hello

    My question is why MSI ECLIPSE booting at startup take 2,3 minutes..before running windows xp a long white color bar came.they complete and then window load.

    i insatll 64-bit operating system too.same problem

    is there any bios setting?

    Thanks in advance

    DB:3.19:Merged: Msi Eclipse Booting Issue Everest Cache And Memory Benchmark sm


    Dont let little things like this worries you. Most of the time, they are harmless.

  • RELEVANCY SCORE 3.19

    DB:3.19:Msi Eclipse Latest Beta Bios 8j




    Does anyone know what version we are up to now for the Eclipse Beta BIOS? And is it just me or can the ftp site no longer be accessed?

    DB:3.19:Msi Eclipse Latest Beta Bios 8j


    Yes, as Jack stated, the bios is erased before the new bios is written to it--so, go directly to the bios version you want to install.

  • RELEVANCY SCORE 3.15

    DB:3.15:Oc'd Eclipse Sli km




    I love the MSI Eclipse SLI and my new i7. Despite what 3dMark is reporting here, my CPU is an i7 920. Im sure I can push it further- my temps are still really good, but just had to share my excitement. Great job MSI!!

  • RELEVANCY SCORE 3.15

    DB:3.15:Over Clock Msi Eclipse 8p




    Hello!

    Guys now its time to rock my pc :o) After out of white-bar issue

    Please help me how i over-clock my PC?

    Waiting for your prompt reply

    DB:3.15:Over Clock Msi Eclipse 8p


    Quote from: MSgt.Gunny on 29-April-09, 03:49:38

  • RELEVANCY SCORE 3.14

    DB:3.14:How To Find Serial Number Of X58 Eclipse Mainboard px




    I try to register the ECLIPSE mainboard with barcode no. on the box ,get a reply saying that is not a MSI product.
    try another barcode on the top side of the mainboard also fail.
    Please tell me where is the serial number,is it at the backside of the mainboard.
    what a pity, Ive put the mainboard inside the case and get everythings tidy up.

    DB:3.14:How To Find Serial Number Of X58 Eclipse Mainboard px


    No choice. You have to remove everything as the boards serial number label is at the back.

  • RELEVANCY SCORE 3.11

    DB:3.11:How To Run A Jsp Application From Eclipse Platform d8


    Hai, i am developing an web application using jsp.All these days i had used Edit plus for the purpose.But now i am interested and also had to use Eclipse platform for this purpose.Can anyone give me an idea regarding the usage of Eclipse platform for running jsp applications.I heard that i had to get some plugins to run a jsp application.What is that plugin and how can i get it.

    DB:3.11:How To Run A Jsp Application From Eclipse Platform d8

    you have to integrate plugins to your eclipse inorder to achieve this

    check out these links

    this plugin is free for personel it is very good to work with struts/JSp etc and it has got a nice starter tutorial also,but for a good performance this need atleast 512mb memory

    http://www.exadel.com/web/portal/home

    this can be used for j2ee development
    http://www.objectlearn.com/index.jsp

    this one is not free but its really nice you can have 30 day trial
    http://www.myeclipseide.com/

    if you just want to start / stop tomcat and deploy applications in tomcat you can use this nice plugin

    http://www.sysdeo.com/eclipse/tomcatplugin

  • RELEVANCY SCORE 3.05

    DB:3.05:Gtx 470 And Msi Eclipse Sli 98




    hi,

    I got a msi eclipse sli mobo and i going to upgrade my sapphire hd 4870 512mb to a gtx 470.

    but why should i buy an msi gtx 470, does the card make a special connection with the mobo so it performs better than when i would put in an EVGA card ??

  • RELEVANCY SCORE 3.03

    DB:3.03:Msi Eclipse Sli X58 + Tr3x6g1333c9 = Cmos Nightmare 8p


    I've run into a what I believe to be a compatibility issue between my Corsair TR3X6G1333C9 6GB 1333 memory and my MSI Eclipse SLI X58 i7 motherboard. At first, I thought it was just a bad MSI board, but now I am thinking it's a compatibility issue between MSI and Corsair.

  • RELEVANCY SCORE 3.03

    DB:3.03:K8n Diamond Plus Vista X64 Ps2 Keyboard Sleep Problem. f3




    On Vista x64 RTM my ps2 keyboard quits working after resuming from sleep. I am running a MSI K8N Diamond Plus. ???

    DB:3.03:K8n Diamond Plus Vista X64 Ps2 Keyboard Sleep Problem. f3


    I have a similar problem with win 7 x64. Im using a standard dell ps2 keyboard and it does not work after waking up.

    Bios 1.34

  • RELEVANCY SCORE 3.03

    DB:3.03:Moved: Msi X58 Eclipse Plus Core I7 Cannot Underclock Overclock fs




    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=129133.0

    DB:3.03:Moved: Msi X58 Eclipse Plus Core I7 Cannot Underclock Overclock fs


    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=129133.0

  • RELEVANCY SCORE 3.03

    DB:3.03:Msi Eclipse Sli / Newest Beta Bios am




    Anyone here got a link to the ftw, cant access ftp now.

    Msi Eclipse.

    142/143b?

    DB:3.03:Msi Eclipse Sli / Newest Beta Bios am


    1.4B2: Using this file is of your own risk

  • RELEVANCY SCORE 3.02

    DB:3.02:Moved: Msi X58 Eclipse Bugging Out! 3x




    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=123814.0

    DB:3.02:Moved: Msi X58 Eclipse Bugging Out! 3x


    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=123814.0

  • RELEVANCY SCORE 3.01

    DB:3.01:Tarjeta Para Televisin Msi Plus No Compatible Con Windows 7 7c


    Hace poco me instalaron Windows 7, tengo una tarjeta para TV marca MSI Plus, pero resulta que no funciona bien con Windows 7. Escucho el audio de los canales y de las emisoras de radio, pero no se pueden ver las imágenes de la televisión. ¿Alquna solución?

    DB:3.01:Tarjeta Para Televisin Msi Plus No Compatible Con Windows 7 7c

    Te puedes contactar con el fabricante MSI , tambien revisa los requerimientos de sistema

    aqui.
    Por ultimo desinstala el programa y el controlador, descargalo desde la pàgina del fabricante y por ultimo instala la ultima version del programa y el
    controlador.
    Cada vez que realices estos procedimientos reinicia el sistema.
    Espero te sirva.

  • RELEVANCY SCORE 2.99

    DB:2.99:Msi Eclipse Won't Post In Triple Channel cj


    2 installed works fine but in dual mode o.c. also instaaled windows 7 64 with two modules

    DB:2.99:Msi Eclipse Won't Post In Triple Channel cj

    Bad luck till now. Mobo producers do not give quaranty on pinns bowed. They also do not repair a faulty socket so in my case 350 Euro gone in air pfff.

  • RELEVANCY SCORE 2.99

    DB:2.99:Msi Eclipse + Tr3x6g1866c9df Problem 7c


    Looking for help, I've been troubleshooting for a month now w no luck.

  • RELEVANCY SCORE 2.99

    DB:2.99:Hope I Can Find Help! jx




    Whats up everyone! First time poster.
    So it seems I cannot get my bios stable to save my life. I get constant restarts and freezing at random times. I have checked all my hardware building this computer one component at a time. I had it stable after making some changes to the bios, 5 months went by and a bios came out so I upgraded and forgot what changes I made to make it stable. Wondering if I can get help, thanks in advance.
    I created everest reports but they are very long... please advise what I should post up from them if anything.

    MSI Eclipse Plus
    core i7 extreme edition
    12g Corsair Dominator Ram
    evga gtx 460
    800w power supply

    DB:2.99:Hope I Can Find Help! jx


    Great to hear that. The best performance is when a system is fully stable, unless you are referring to overclocking which you have to do some reading in our overclockers section.

  • RELEVANCY SCORE 2.99

    DB:2.99:Msi Eclipse Plus d8




    Hai i have a strange problem with me eclipse plus combined with corsair dominator 3x2 GB TR3X6G1866C9DF in triple channel mode (black slots,2,4,6) the sytem constant reboots after showing d4 led...

    Placing one memory in slot 2 works fine for all three, also puttiing two modulus in slot 2 and 4 off whatever combination of the three works fine windows 7 installed.

    Tried all kinds of cell menu settings found on the net and msi and corsair forums and memory timings no luck with three in triple mode unsuccesfull.

    I have an i7 920 processor and gtx 295 and 850 W silverstone power supply.

    Is there an eclipse plus bios update like for the eclipse standard mobo that couls help me?

    Or should i buy other memory and which and forget about the dominators.....180 euro lost.....

    DB:2.99:Msi Eclipse Plus d8


    Hmm I asked the Dutch MSI RMA service if they could repair for a fee they say they simply cant. Cuase they are not equiped to do it. I know MSI USA has done it but the office in Holland obviously cant... minor headache..

  • RELEVANCY SCORE 2.99

    DB:2.99:No Sound From Msi X79a-Gd45 Plus mz




    I have the MSI X79A-GD45 Plus. Ive uninstalled the Realtek drivers and reinstalled them from the Mother Drivers CD and also downloaded one from the MSI website.
    Realtek Audio Manager shows speakers are plugged in and work but I hear no sound. Ive tried working speakers and headphones.

  • RELEVANCY SCORE 2.99

    DB:2.99:Msi: Sli Plus Eight zf




    Anand Tech has a review of the MSI K8N Diamond Plus:

    Quote

    DB:2.99:Msi: Sli Plus Eight zf


    Quote from: Richard on 20-April-06, 02:34:49

  • RELEVANCY SCORE 2.97

    DB:2.97:Eclipse Crashes All The Time No Matter What I Do s8



    Hello,

    my problem is as follows: eclipse crashes (freezes) all the time within 1-3 minutes without any error message.I think it doesnt matter what I do.I installed eclipse plus junit and got kde running (its all up to date).

    I dont know what to do. Are there even any log files? I couldnt find one.

    Any help could help O_o

    DB:2.97:Eclipse Crashes All The Time No Matter What I Do s8


    Hey,

    fortunately starting eclipse this way seems to be working:

    export LD_LIBRARY_PATH=/opt/java/jre/lib/i386/client::/opt/java/jre/lib/i386/usr/share/eclipse/eclipse

    thanks a lot

  • RELEVANCY SCORE 2.96

    DB:2.96:Msi Eclipse Plus Motherboard Compatible With 32nm Gulftown Cpu's? 9z




    Hi, I am new to the forums here. I was told by a tech support agent that since the Eclipse Pluss product page on MSI.com didnt list the Intel 32nm Gulftown CPUs under the CPU Compatibility list, that I should register in the forums on MSI.com and seek help.

    So here is my concern. I recently got a hold of an engineering sample i9 chip. I already have my motherboard (MSI Eclipse Plus) ordered, and the CPU is on its way as well. I researched the compatibility of this motherboard, and found that the MSI Eclipse Plus is supposed to be compatible with 32nm Gulftown chips if you have v1.0 of the BIOSes. Well there is only one BIOS on MSI.com for the Eclipse Plus, so I dont have many options anyway. But I was just wondering if anyone has tried 32nm chips on any MSI X58 boards, and whether a special beta BIOS is required or something.

    Thanks in advance!

    DB:2.96:Msi Eclipse Plus Motherboard Compatible With 32nm Gulftown Cpu's? 9z


    Blaise, thats no big surprise as long as it sometimes takes them to update CPU support and BIOS pages on their websites. Its my opinion too many people expect instant changes which in the real world arent as instant as some people would like. I would like to order parts from newegg and get them within 2 days but its not going to happen if though I live close enough for it to be possible.

  • RELEVANCY SCORE 2.96

    DB:2.96:Msi X58 Eclipse [Ms-7520] Beta Bios Thread p8




    MSI has added VIRTUALIZATION TECHNOLOGY feature in this release [v1.9b2].

    DB:2.96:Msi X58 Eclipse [Ms-7520] Beta Bios Thread p8


    Yes, cleared the CMOS allways after flash (unplug and hold button in for 20 seconds, not sure if I have to hold for 20 seconds or not). I only set the time and loaded the optimized defaults. Also set the onboard to RAID.

  • RELEVANCY SCORE 2.96

    DB:2.96:Moved: How To Hard Reset Msi Windpad Enjoy 7 Plus? cz




    This topic has been moved to MSI Tablet PCs.

    https://forum-en.msi.com/index.php?topic=165780.0

    DB:2.96:Moved: How To Hard Reset Msi Windpad Enjoy 7 Plus? cz


    This topic has been moved to MSI Tablet PCs.

    https://forum-en.msi.com/index.php?topic=165780.0

  • RELEVANCY SCORE 2.95

    DB:2.95:Moved: Ms-7520 Msi X58 Eclipse Help Bios Hangs! jk




    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=124153.0

    DB:2.95:Moved: Ms-7520 Msi X58 Eclipse Help Bios Hangs! jk


    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=124153.0

  • RELEVANCY SCORE 2.93

    DB:2.93:Msi Eclipse Plus Problem, Help Me !!! 3a




    Sorry for my poor English, I am an Italian boy!

    I bought a MSI Eclipse and I assembled a PC
    check all connections and perfect, first switch
    black screen, no signal, I think the GPU, the change .....

    but nothing, black screen, NO signal video !!!!!

    What is the problem ....????

    I state that I CPU core i7 930, may be the problem ...????

    CPU does not support possible black screen!!

    I do not think since at least the post bios should see!!

    Help me please!!

  • RELEVANCY SCORE 2.93

    DB:2.93:Msi Eclipse mc




    Hi guys

    My MSI eclispe is doing weird things... it may be normal... thats why im checking...

    I have left everything in the bios to the defaults... Ram is running at 1333 everything perfect...

    IF i run CPUZ in Vista the core voltage is not stable and jumps around from 1.056 to 1.280

    Why is it changing the voltages the whole time??? Should this be happening...

    I have a MSI eclipse with I7 920 , Mushkin 3x2 1333 kit, Corsair TX750 , 8800GT

    DB:2.93:Msi Eclipse mc


    perfectly normal , what bios do you have ?
    If you have bios 1.43 then you can leave EIST on and disable C1E in the CPU features , this will stop changing the voltage.
    Eist must be on if you want to use Turbo mode .
    If you have bios 1.2 then you can disable EIST but you will loos your Turbo mode.
    It is a power saving tool from Intel , but if your not overclocking, just leave it on.

  • RELEVANCY SCORE 2.93

    DB:2.93:Msi Eclipse Plus (Sli) Boot Problem ! 1c




    Hi

    I have a problem , but im not sure if its a motherboard problem ! So i request some help to clearly identify the troubleshoot .

    When i try to launch my computer i got 4 bip and message on the Debug led (on the back of the motherboard) :
    - It say FF
    And on the DLed 2 i have the message :
    - CPU Ini.

    FF means status = Power on and Initialize CPU (see in the booklet of MSi Motherboard)

    All is running : CPU Fan and front fan turning; Power on Hard drive ; GTX295 Led is Green , but nothing happen . The card stay in freeze position .

    I have check the PSU 1000w Corsair . GTX295 have power , Motherboard led of CPUpower is on (6 blu Led )
    I have unplug all component on motherboard except PSU and still the same message and status
    I have pull off the PSU and press the Cmos reset button .
    I have Pull out the battery of the motherboard for 30 sec , still nothing

    So i dont understand what happened . May be CPU is down or the motherboard is down i dont know if there is a solution to identify the problem

    All Component are new from monday .

    I apologise for my english

    Thanks for helping if you got any idea

    DB:2.93:Msi Eclipse Plus (Sli) Boot Problem ! 1c


    If you do pull the CPU for reseating, be sure to check carefully for socket pins damaged or bent.

  • RELEVANCY SCORE 2.93

    DB:2.93:Msi Eclipse Plus dx




    Hello, i will try to get the eclipse plus on watercooling i have a quetion about the isolation with pads or paste.

    http://www.overclockersclub.com/reviews/msi_eclipse_plus/3.htm give the pics for standard cooling block and NB, SB and NF200 chip.

    The NB has a black cloth isolation it is i think, the NB chip has paste.

    The SB has a white pad fully covered and the NF200 has paste as its surrounding see the pics.i

    Where there is no contact MSI block has a thin plastic coating.

    Im planning to cover the SB again with isolation pad and also the NB and NF200 area and use paste on these two chips itself.

    What do u think will this work. What is this black stuff around the NB can i use pad for this?

    DB:2.93:Msi Eclipse Plus dx


    Hi Grimulkan, welcome to the forum. We dont want to hijack gulares thread, but, you should be ok around the NF200. If MSI thought it necessary to put an isolation pad there, they would have. It sounds like you didnt put quite enough thermal compound on the chips. I put about a 1/4 grain size of rice, slowly carefully spread it from the center towards the outer edges using a toothpick. Also, a very thin layer spread out on the heatsink as well. (This was on the Pro-E IOH, but the principal is the same). My Eclipse Plus was 74c I left it alone. After two weeks runtime, the IOH temp dropped 10c to 64c +/- 1c.

    The other modification I made, was to add some nylon #4-40 washers between the black original washers the springs. This allowed just a little more torque pressure of the heatsinks to the chips. Around a 20c (or more) reduction in temps is not uncommon with the redo.

  • RELEVANCY SCORE 2.91

    DB:2.91:3 Crossfirex In Eclipse Plus.. Freeze..Any Idea..?? xk




    Dear all..

    Need a help with 3 CrossfireX setting in the MSI Eclipse Plus, im running 3 x HD4890 on this board but the pc will freeze then have a BSOD if start using the 3d application ( games too ). The GPUZ and CCC show there are 3 gpu in crossfirex enable..Using 2 x HD 4890 is fine. My testing pc specs : MSI Eclipse Plus bios 1.0, ATI HD 4890 x 3, Enermax Revo 1050w, Corsair 6gb DDR31600CL7, Core i7 920 ( running OC or not the result are still same ), CCC 9.8. Any idea what happened ? or maybe we couldnt run 3 CFX in this board ? only support for 3 SLI...?

    Thank You....

    DB:2.91:3 Crossfirex In Eclipse Plus.. Freeze..Any Idea..?? xk


    SOLVED.... the problem gone... ECLIPSE PLUS could running the 3 CFX... im miss to flashing bios back to normal bios.. ( using the beta bios to test ). Will post a quick test result...

  • RELEVANCY SCORE 2.89

    DB:2.89:Eclipse Plus Bios 1.1 Bricked My System!!!! 3j




    I have had some weird bluescreen issues after cold-booting my system since I built it last year. When I saw that there was a new BIOS, I thought it might fix this issue (since the BIOS fixes listed memory, which I have always thought to be the problem). I ran the M-Flash utility and it said ROM dismatch! However, I was confident that this was the correct BIOS, since I downloaded it from MSI, and I forced the flash. Now my debug LED is only going to FF (meaning power-on) and nothing else happens. What can I do?

    DB:2.89:Eclipse Plus Bios 1.1 Bricked My System!!!! 3j


    I think there should be a disclaimer in a read-me included with the BIOS if it is known that M-Flash doesnt work properly. The word doc included had very dated instructions (i.e. saying to use a floppy to flash when the Eclipse Plus doesnt even support floppy drives!) and I didnt know that there was a better option than M-Flash. BIOS recovery, unfortunately, isnt an option, because the POST procedure never gets past the CPU initialization phase.

    I do have access to facilities where I could potentially flash the BIOS using a parallel port (I am a Electrical and Computer Engineering Graduate student) and the DOS program called spipgm, but I dont feel like going through that hassle right now.

    So far I think Ill just RMA the board, unless my schedule frees up and I think I want to try flashing manually.

    I really wish the board had redundant, socketed BIOS chips like most high-end motherboards now have. It would probably save MSI a lot of money in just customer service costs. I know that the fix is trivial and almost free of cost for them since all they do is plug into the jspi1 port and flash the BIOS, but all of the shipping and emails/phone calls probably cost a pretty penny.

  • RELEVANCY SCORE 2.87

    DB:2.87:Eclipse Ide Deploy On Hana Prem-Plus 99



    Hi,

    I have a HANA prem-plus instance. Every time I try to deploy directly from Eclipse I get on start:

    Could not start application psd: Attempt to start more VMs [1] of size [LITE] than the quota [0] for account [xxx]

    Sure I can use the console "neo deploy" with "--size prem-plus" and it works but this is a little inconvient... Is there anyway to give that size etc. parameter with Eclipse deploying?

    Thx in advance,

    Frank

    DB:2.87:Eclipse Ide Deploy On Hana Prem-Plus 99


    Hi Frank,

    It's not possible to specify the compute unit size when deploying/starting from the Eclipse IDE, and it just tries to start on the default size. Certainly we can improve here e.g. by looking at what is available in the account, but for the time being you'll have to avail of the console commands.

    Cheers,

    --Vlado

  • RELEVANCY SCORE 2.85

    DB:2.85:Moved: X99s Sli Plus Freckles cj




    This topic has been moved to MSI Intel boards.

    https://forum-en.msi.com/index.php?topic=251579.0

    DB:2.85:Moved: X99s Sli Plus Freckles cj


    This topic has been moved to MSI Intel boards.

    https://forum-en.msi.com/index.php?topic=251579.0

  • RELEVANCY SCORE 2.84

    DB:2.84:Re: Msi 58 Eclipse Plus Won't Start ax




    Hmmm...bad board. I guess my context was completely wrong. Hehehehe

    DB:2.84:Re: Msi 58 Eclipse Plus Won't Start ax


    Hmmm...bad board. I guess my context was completely wrong. Hehehehe

  • RELEVANCY SCORE 2.84

    DB:2.84:Re: Help With Eclipse 3m


    I thought Tomcat and Web services were separate plugins for Eclipse. Do you have both installed?

    I use Eclipse, but I don't use the Tomcat or Web service plugin. I don't find a need to run servlets or JSPs inside Eclipse. The only reason I can think of would be for debugging, and usually I do that with a logger. Plus I unit test the classes that actually do the work in my apps, so the servlet is just delegating to them. JSPs are just for display, so they're no problem.

    %

    DB:2.84:Re: Help With Eclipse 3m

    has anything changed much from eclipse 2.1.3 ?????A LOT. Yes. The 3.0 release is a very different beast.

    You don't normally "compile" as such. The compilation happens as you write the code, so that errors can be detected and reported dynamically. It is possible to build all projects, or to turn off runtime compilation and do individual project builds - but I don't recommend it unless you have a very slow machine. You'll get used to it, then grow to love it.

    The compile errors thing is dead handy too - you can filter out errors/warnings you're not interested in, but far better to leave them all on so that your resulting code produces no warnings. It's also nice to be able to add a "//TODO:" tag to something and have it listed so that you don't forget to do it. I use that one a lot (I think the idea comes from Visual Studio originally)

    Dave.

  • RELEVANCY SCORE 2.84

    DB:2.84:Msi Eclipse No Display 83




    can anyone help me Im Having a problem with my MSI ECLIPSE i bought it last 3 months ago but suddenly last night my computer hangs and after i restart it it always restart without showing the bios or any msg in the Monitor i tried to insert the D-Led 2 and it shows CPU INI - DDR INI then it restarts and it will show the same message again.. I Tried not to install memory. and video CArd and after i turn ON the CPU it shows CPU INI and stop there and it didnt restart.. anyone know what is the problem with my MOTHERBOARD

    SPECS

    MSI ECLIPSE
    Core i7 920
    GTX 280
    Transcend 2GB ddr3 1333
    Corsair 620watts PSU

    DB:2.84:Msi Eclipse No Display 83


    I agree with Jack try starting it with just one stick in the proper slot. Then check out the user manual to make sure you are using compatible RAM.

    User Manual Link

    http://global.msi.com.tw/index.php?func=downloaddetailtype=manualmaincat_no=1prod_no=1695

  • RELEVANCY SCORE 2.81

    DB:2.81:Java Deployment With Intune Issues p7


    Hi.
    I found an issues regarding deployment of Java Update 25 in both 32 as 64 bit.
    Deployment works fine, I use the msi and cab files belonging to each distribution, the issues are, if someone has Eclipse open as example while the deployment runs:
    1. Intune will ask for a PC restart
    2. Eclipse fails to start since the pathto Java can't be found
    Deploymentworks fine if Eclipse is closed, no asking for a restart, no failing Eclipse startup.
    So it would be nice if there was a way to tell people toshut down Eclipse, browsers and other Java dependent applications before they run the update.
    Also, currently it is only possible to chosesoftware deployments to be required, what if I want a msi/exe to be available as free of choice just like many Microsoft Updates are?

    Regards Joerg Baermann

    DB:2.81:Java Deployment With Intune Issues p7

    Hi.
    I found an issues regarding deployment of Java Update 25 in both 32 as 64 bit.
    Deployment works fine, I use the msi and cab files belonging to each distribution, the issues are, if someone has Eclipse open as example while the deployment runs:
    1. Intune will ask for a PC restart
    2. Eclipse fails to start since the pathto Java can't be found
    Deploymentworks fine if Eclipse is closed, no asking for a restart, no failing Eclipse startup.
    So it would be nice if there was a way to tell people toshut down Eclipse, browsers and other Java dependent applications before they run the update.
    Also, currently it is only possible to chosesoftware deployments to be required, what if I want a msi/exe to be available as free of choice just like many Microsoft Updates are?

    Regards Joerg Baermann

  • RELEVANCY SCORE 2.81

    DB:2.81:Msi Eclipse Sli Plus Wont Load Windows k7




    Ok, hopefully someone can help me out here. Just got the new x58 MSI Eclipse Plus SLI Board from Newegg. I have tried everything possible just to get the thing to boot so i can install windows 7.

    It will load up to the point it says starting windows and then just sits there.

    Here are my specs

    Core i7 920
    MSI Eclipse Plus
    12GB Gskill DDR3-1600 Ram
    3 WD Velociraptor in Raid O
    1 WD Black 1TB for storage
    EVGA GTX 285 SC x2

    I

    DB:2.81:Msi Eclipse Sli Plus Wont Load Windows k7


    3 HDDs in RAID 0? Try with just 2 HDDs in RAID 0.

    I suggest that you try with just 1 piece of RAMs as well.

    Please provide your PSU specs amps.

  • RELEVANCY SCORE 2.81

    DB:2.81:Overclocking The I7 920 On Eclipse To 3.2 Ghz 3m




    I am trying to overclock my i7 920 to 3.2 ghz to match my 1600 DDR3 rams, I tried alot of settings but got nowhere. If anyone has successfully clocked such a simple setting could they post their BIOs settings please?
    Also is it advicable to clock to 3.2 from 2.66 on stock fan with MSI eclipse mainboard?

    DB:2.81:Overclocking The I7 920 On Eclipse To 3.2 Ghz 3m


    timings? if I let them go auto they end up at 8-8-8-19 1t (1440mhz) but I have been forcing them to 9-9-9-24 2t and 1.55v for stabilitys sake while testing the 6gb.... I got some good advice on some different settings to try.. I think the vdimm and qpi voltage need to be higher with 6gb... like a bit higher than I was trying... anyways, I am going to do some more testing tonight.. with bios 1.39 and some new settings.. if I have any success I will be sure to post my settings here.

    BTW, have you tried leaving everything on AUTO and just upping the BCLK? I read a review on anand about differences between 3gb, 6gb, and 12gb memory configs and they had a hell of a time with the eclipse and 12gb... they ended up having to put everything on AUTO and then raide the BCLK which made it stable while overclocked. Granted we are only using 6gb here, but its something to try.. I think the worst part about the AUTO settings is it will put too much vcore into your cpu likely, but just to test things out it should be safe to try.

    PS: thanks for the report on the LEDs.. I think mine are just burned out.. if there was a real issue with the ddr power I am sure my machine would not work.

  • RELEVANCY SCORE 2.81

    DB:2.81:Latest Beta Bios For Msi Eclipse 7d




    Greetings to everyone and Happy Valentines! Is there anyone who has the latest beta bios for Eclipse? Thanks in advance

    DB:2.81:Latest Beta Bios For Msi Eclipse 7d


    https://forum-en.msi.com/index.php?topic=124124.0

    P.S wrong section.

  • RELEVANCY SCORE 2.81

    DB:2.81:Strange Power Up ... Eclipse 73




    Hey

    It probably normal but when i turn my pc on... it seems to go on for like 4 secs then turns off again and a small delay then it turns on and runs...

    Is this normal? The bios settings are default ... Been really happy with the MSI eclipse just turned it on and everything worked... Ram set to 1333 and everything else is perfect...

    Is this normal?

    Im running a MSi eclipse with a I7 920 and Mushkin 1333 3x2 kit

    DB:2.81:Strange Power Up ... Eclipse 73


    Quote from: BronxAtHome on 25-March-09, 13:46:25

  • RELEVANCY SCORE 2.81

    DB:2.81:Msi Eclipse Sli - Esata And Power Over Esata? fx




    Does the Eclipse SLI support power over eSATA?

    DB:2.81:Msi Eclipse Sli - Esata And Power Over Esata? fx


    Its something that could be incorporated into PSUs as well. An enterprising PSU maker could probably boost their sales with such a connection or 2 built into the back.

  • RELEVANCY SCORE 2.81

    DB:2.81:Moved: Latest Beta Bios For Msi Eclipse ax




    This topic has been moved to BETA MOD BIOS Section.

    https://forum-en.msi.com/index.php?topic=124321.0

    DB:2.81:Moved: Latest Beta Bios For Msi Eclipse ax


    This topic has been moved to BETA MOD BIOS Section.

    https://forum-en.msi.com/index.php?topic=124321.0

  • RELEVANCY SCORE 2.81

    DB:2.81:Msi Eclipse Sli - Max Ram Per Slot Question d1




    Hello,

    I have this old MSI Eclipse SLI board, and was wondering if anyone tried to install 3x8GB (any Mhz) and got it working. This system currently has 3x2GB 1333Mhz and runs fine, but it needs more in order to run more virtual machines. I believe this board supports a maximum 24GB of RAM.

    DB:2.81:Msi Eclipse Sli - Max Ram Per Slot Question d1


    There were no 8GB modules when this board was made, they may or may not work with this board but I know at least one X58 board that runs 2 x 8GB http://forums.tweaktown.com/gigabyte/60314-x58a-ud3r-rev-1-0-8gb-dimm-compatibility.html#post496522.

  • RELEVANCY SCORE 2.80

    DB:2.80:Help Needed To Get Started With Lsl Plus In Eclipse 9a



    I have just completed the Eclipse tutorials to try to understand the workbench.

    So far it has been satisfactory. What I now need is help to get started with using Eclipse and the LSL Plus plugin.

    Does anyone have any turorials or descriptions of how to get started?

    DB:2.80:Help Needed To Get Started With Lsl Plus In Eclipse 9a


    *snickers* I'm lazy too, that's why I'm using an editor with sytax highlighting, auto completion ... in the first place - and one with out world debugging. For movements and such, I use inworld debugging, of course - that's much easier and straight forward. But in projects that include quite some communication (e.g. a HUD with many communicating prims) or scripts that mostly do data manipulation that does nor result in 'graphical action', I frequently use this LSL plus feature. Also, I code a lot while on the train, and it's not much fun running SL there. There are circumstances and reasons to do some debugging offline - but it takes a little time to set up an sim project.

  • RELEVANCY SCORE 2.80

    DB:2.80:Msi X58 Eclipse Sli No Sound d1




    I have a x58 eclipse sli with the x-fi sound card with xp I had sound when first set up for a day or two but now no sound. It shows the sound card listed in the device manger but in the sound option it will not let me choose anything. I updated to the newest drivers. Any ideas?

    DB:2.80:Msi X58 Eclipse Sli No Sound d1


    What OS are you running? Please include a complete listing for your system.
    Read==Posting Guide

  • RELEVANCY SCORE 2.80

    DB:2.80:Moved: Sli Won't Stay Available On Msi Eclipse Sli Mobo With 2 Evga Gtx 280s zf




    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=122254.0

    DB:2.80:Moved: Sli Won't Stay Available On Msi Eclipse Sli Mobo With 2 Evga Gtx 280s zf


    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=122254.0

  • RELEVANCY SCORE 2.79

    DB:2.79:Msi Eclipse Sli (Not Plus) Weird Memory Problem dc




    Hi there these are my specs:
    CPU: i7 920 D0 2.66Ghz
    Mobo: Eclipse SLI (not PLUS) X58
    RAM: 3 x 2GB Crucial CT3KIT25664BA1339 1333Mhz 9-9-9-24 1.5V LINK
    VGA: ASUS 4870 1GB Glaciator
    HDDs: System 250GB WD AAKS, Storage 250GB WD KS + 1TB Seagate gen12
    Peripherals: 1 PCI Wifi Card
    PSU: CoolerMaster Real Power M520

    My Problem:
    Im having trouble understanding why the board wont recognize all 6GB of RAM instead of only 4GB.. On POST screen I get 4096MB OK.. BIOS recognizes all 3 sticks and Memory Timings and Speed. When I install a single stick the computer wont even POST... it falls in an infinite rebooting loop. Works only with more than 1 stick installed.

    What Ive done so far:
    Updated the BIOS to version 1.10 (1.A)
    Tested with bare minimum hardware... VGA, 1xHDD, K/B+Mouse Ive even disconnected the front panel connectors
    Swapped the memory modules around the slots.

    Some screen-shots (of weirdness):

    Notes:
    System runs perfectly stable with only the 4GB of RAM, stress tested it with different tools. (except Memtests)

    DB:2.79:Msi Eclipse Sli (Not Plus) Weird Memory Problem dc


    Thats a tedious job to do. I remember doing the same for the socket 478 processors when I am still a technician in the company. After doing a few of them, you can feel your eyes popping out and seeing pins everywhere .

  • RELEVANCY SCORE 2.79

    DB:2.79:Msi Eclipse Plus (Skype Sound Problem) zf




    Hi,

    Currently i have a problem with my soundcard (X-Fi sound card) i think. After change a new sound (rma) card last week, i still facing the same problem. I play game with a skype. The problem was my friend cant hear me clearly (robot sound)(sometime no sound)(water sound) . Already re-stall everything include my window 7. Stll the same. Any idea wht is the problem?

    DB:2.79:Msi Eclipse Plus (Skype Sound Problem) zf


    Quote from: tancheeru on 13-March-10, 08:18:05

  • RELEVANCY SCORE 2.79

    DB:2.79:Eclipse Plus Nothing Turns On Except Tiny Yellow Light j9




    Motherboard: MSI Eclipse Plus
    Bios: AMI BIOS Version 1.0
    CPU: Intel I7 975
    Memory: Corsair Dominator GT 6GB
    Video card: EVGA GeForce GTX 295 Driver 190.62
    Power Supply: Thermaltake Toughpower 1200 W - Four Independent dedicated +12V rails (12V1 12V2 12V3, 12V4)
    Hard Drives: WD VRaptor 300GB SATA WD Seagate Barracuda 7200.11 1.5TB SATA
    Optical Drives: Samsung SH-S223 SATA
    Operating system: Windows Vista Ultimate 64 bit SP2

    This is the second system I have built with identical parts except for the RAM. The first system works fine and I have 6 GB of OCZ Gold TC PC3-1600 DDR3 in it.

    The second system will not light up except for a small yellow light on the Eclipse Plus board just above the power button. I disconnected the power supply from my first system and put it into the second system but nothing changed. I put the power supply from the second system in the first system and it worked perfectly powering up the first system.

    I tried the second system with just 1 stick of memory in slot A0. No change. I have checked all the connections. I switched connectors for the power on button for the reset button on the mother board in case the power on button was defective but there was no difference.

    Is there anything else I should test?

    Do you think I have a defective mother board?

  • RELEVANCY SCORE 2.79

    DB:2.79:Eclipse Sli Slow Install Of Vista 64 And No Bootable Raid 0 Volume 7x




    Ive been trying to install Vista 64 on the MSI Eclipse SLI mobo with 2x Seagate 1.5TB hdd in raid 0. Can someone please help me?

    I have the following:
    1) Onboard ATA Devices set for [RAID]
    2) Use ctl-i to create a raid volume [RAID0] - the volume reads as not bootable
    3) Vista 64 install takes a long long time and does not recognize the disk volumes even with the ICH10R SATA RAID driver.

    MSI Eclipse SLI mobo BIOS v1.8
    OCZ DDR3 1600 mem
    i7 950

    DB:2.79:Eclipse Sli Slow Install Of Vista 64 And No Bootable Raid 0 Volume 7x


    Have you try on WinXP or Vista yet?

    There may be 2 complications to this issue. One is largest size supported in RAID0, the other may be a driver issue, which means limitation on size and platform support like Win7.

  • RELEVANCY SCORE 2.77

    DB:2.77:Tr3x6g1600c8d Auf Msi Eclipse Sli Laufen Nur Auf 1066mhz cz


    Hallo zusammen ich bin neu hier..

  • RELEVANCY SCORE 2.77

    DB:2.77:Msi Eclipse North Bridge Temp f7




    MSI Eclipse north bridge temp [room temp 19C]
    1/ GreenPower Default 60C [6 CPU APS LED]
    2/ GreenPower Optimize 75C [2 CPU APS LED]
    3/ GreenPower Max Power Saving 80C [2 CPU APS LED]

    why is it with Max Power Saving ,north bridge temp is highest.

    please enlight me

    DB:2.77:Msi Eclipse North Bridge Temp f7


    Hi!

    Check my post here: https://forum-en.msi.com/index.php?topic=122469.0

    I havent tried experimenting with power savings yet.

  • RELEVANCY SCORE 2.76

    DB:2.76:Msi Enjoy 10 Plus pj




    I cant open and play angry bird on my MSI enjoy 10 plus please help me to solve this problem...thank you

    DB:2.76:Msi Enjoy 10 Plus pj


    Havent tried to update yet but thanks jinkira for the information. Is updating easy or hard for newbies like me?

  • RELEVANCY SCORE 2.76

    DB:2.76:Thread: Standalone Repackager Question j7


    I installed the above on a clean PC and created the MSI package for my legacy program.

    In the C:\\Packages folder, I saw 2 msi and 2 ism files plus other files and subfolder. Do I only need the 2 MSI files when I want to use the MSI install or I need to copy this complete c:\\Packages folder and create the bundle as network MSI Install?

    Thanks

    Andy

    DB:2.76:Thread: Standalone Repackager Question j7

    just the 1 msi. packagename.msi. NOT pakagename.context.msi

  • RELEVANCY SCORE 2.75

    DB:2.75:Thread: Zcm 10.0.3 On Sles 10 Sp2 /Tmp Folder 50gigs Plus aj


    I have one ZCM server running on SLES 10 SP2 and zenworks keep putting massive amount of folder/file in my /tmp folder. All same files but different name

    all the folder are in these format

    iep58418.tmp

    iep55962.tmp

    iep55967.tmp

    iep60858.tmp

    iep58428.tmp

    iep60868.tmp

    iep58423.tmp

    iep60863.tmp

    and they contain

    CASA.x86_64.msi

    FirewallHandler.dll

    Interop.NetFwTypeLib.dll

    TargetOS.x64

    ZENPreAgent.exe

    ZENPreAgent.exe.cer

    ZENPreAgent.exe.cfg

    ZENPreAgent.exe.server

    ZPA_Iface.exe

    authtokenclient.x86_64.msi

    novell-zenworks-actionhandlers-10.0.2.0.msi

    novell-zenworks-actions-10.0.3.msi

    novell-zenworks-actions-langs-client-10.0.3.msi

    novell-zenworks-agent-help-10.0.1.msi

    novell-zenworks-bundle-10.0.3.2.msi

    novell-zenworks-bundle-langs-client-10.0.2.msi

    novell-zenworks-content-distribution-point-10.0.3.msi

    novell-zenworks-content-distribution-point-langs-client-10.0.1.msi

    novell-zenworks-extnlibraries-10.0.1.0.msi

    novell-zenworks-inventory-10.0.3.2.msi

    novell-zenworks-inventory-langs-client-10.0.1.msi

    novell-zenworks-patch-10.0.1.msi

    novell-zenworks-patch-management-agent-10.0.3.2.msi

    novell-zenworks-policy-10.0.3.2.msi

    novell-zenworks-policy-action-handler-res-10.0.1.0.msi

    novell-zenworks-policy-langs-client-10.0.3.msi

    novell-zenworks-policyhandlers-10.0.3.2.msi

    novell-zenworks-primary-agent-10.0.3.2.msi

    novell-zenworks-primary-agent-langs-client-10.0.1.msi

    novell-zenworks-remotemanagement-10.0.3.msi

    novell-zenworks-remotemanagement-langs-client-10.0.1.msi

    novell-zenworks-system-update-10.0.3.2.msi

    novell-zenworks-uninstall-10.0.3.msi

    novell-zenworks-usermanagement-10.0.3.2.x86_64.msi

    novell-zenworks-usermanagement-langs-client-10.0.3.msi

    novell-zenworks-version-10.0.3.msi

    novell-zenworks-windows-desktop-10.0.3.msi

    novell-zenworks-windows-desktop-langs-client-10.0.2.msi

    novell-zenworks-winproxy-10.0.3.msi

    novell-zenworks-zencore-agent-10.0.3.2.msi

    novell-zenworks-zencore-agent-langs-client-10.0.3.msi

    novell-zenworks-zennotifyicon-10.0.1.msi

    novell-zenworks-zennotifyicon-langs-client-10.0.1.msi

    novell-zenworks-zisdservice-10.0.1.0.msi

    novell-zenworks-ziswin-10.0.3.2.msi

    x64.dotnetfx.exe

    Anyone know why ZCM hates me?

    DB:2.75:Thread: Zcm 10.0.3 On Sles 10 Sp2 /Tmp Folder 50gigs Plus aj

    Originally Posted by knodi


    I do see this process running

    #ps aux | grep update

    root 16054 0.0 0.8 177336 31332 ? Ssl 15:47 0:02 zen-updater -' + '-desktop /usr/lib/zen-updater/ZenUpdater.exe -' + '-patch-view

    is this normal? Or should that be not running.



    That zen updater doesn\'t have anything to do with the System Update mechanism. That is the zmd updater (SLES online update patches). Those two can confuse somewhat :)

  • RELEVANCY SCORE 2.75

    DB:2.75:Moved: Msi Diamond Plus Problems s1




    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=96047.0

    DB:2.75:Moved: Msi Diamond Plus Problems s1


    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=96047.0

  • RELEVANCY SCORE 2.75

    DB:2.75:Overclock Msi Eclipse Plus With Intel Core I7 920 xk




    Hi,

    I need help on how to overclock MSI Eclipse Plus with Intel Core i7 920?

    Here are my system spec.

    MSI Eclipse Plus
    Antec Quattro 850W PSU
    Corsair TR3X6G1600C9
    120GB Sata HDD

    Rgds

    DB:2.75:Overclock Msi Eclipse Plus With Intel Core I7 920 xk


    With a stock Intel CPU cooler, I dont recommend going past what default voltages can achieve, excluding maybe a memory voltage increase or timings adjustment if needed. Some utilities are very important to have before starting to OC such as Real Temp CPU-Z. What are your CPU IOH temps reading in bios H/W Monitor? The temps of the individual cores is also very important, which Real Temp will provide you with.

    As mentioned, with a stock cooler, I would suggest not going past about 3.507 (bclk 167 X 21). Other settings need to be changed before this is done however. We need those temps too, before specific settings can be suggested. The last thing any of us want to do, is make settings changes voltage recommendations that may damage your system.

  • RELEVANCY SCORE 2.75

    DB:2.75:Question By Blackberry Plus 1.3.0 For Eclipse 37



    why the editor cant' show content assist (code assist) ~?

    DB:2.75:Question By Blackberry Plus 1.3.0 For Eclipse 37


    i think it's turned off by default ... not sure why

    but Help-Preferances-Java-Editor-Content Assist-Advanced and click all in the bottom box

  • RELEVANCY SCORE 2.73

    DB:2.73:Error When Opening Richfaces File In Eclipse With Fedora 8 9z



    When I try to open the seam generated home.xhtml file with Eclipse (plus jboss tools) on Fedora 8 I get the following error:Caused by: java.lang.UnsatisfiedLinkError: no swt-xulrunner-gtk-3346 or swt-xulrunner-gtk in swt.library.path, java.library.path or the jar file at org.eclipse.swt.internal.Library.loadLibrary(Library.java:219) at org.eclipse.swt.internal.Library.loadLibrary(Library.java:151) at org.eclipse.swt.browser.Mozilla.create(Mozilla.java:244) ... 48 moreI'm using a standard Fedora 8 image of eclipse yet I spent all day trying to find this file and I can't. Should libswt-xulrunner-gtk-3346.so. exist in /usr/lib/eclipse?

  • RELEVANCY SCORE 2.73

    DB:2.73:Msi Eclipse Sli Slowly x3




    I Upgrade My PC From MSI P45-8D - 3000 Core 2 Do With 4 GB DDR2 To This

    MSI Eclipse SLI (MS-7520)
    Intel(R) Core(TM) i7 CPU 940 @ 2.93GHz
    10229 MB (DDR3 SDRAM)
    NVIDIA GeForce 9500 GT (1024 MB) With Last Driver 182.08

    Clean Install Operating System Microsoft Windows Vista Business With SP1
    But Its Very Slowly

    And I Update Bios To 1.5B2
    And I Install lastest Drivers

    But My System Still Too Slowly

  • RELEVANCY SCORE 2.73

    DB:2.73:Msi 58 Eclipse Plus Start Problem. kz




    Hi
    i recently bought:
    MSI x58 Eclipse plus
    Intel i7 950
    2x OCZ DDR3 PC3-12800 Platinum 6 GB (3 x 2 GB) 1.65 voltage.
    Corsair 750w supply

    when i try to start the PC nothing happens, just led`s flash for 0.5 second and then fades.

    i have tried only 1 memory module,
    i have tried a another Videocard
    i dismounted the Motherboard from the case so its completely away from metal e.t.c
    i have tried another PSU and no luck

    Im just using the buttons on the mobo, ATM because it drives me crazy.
    any idea if it may be the motherboard`s fault?

    any tips are welcome

    DB:2.73:Msi 58 Eclipse Plus Start Problem. kz


    nvm smoke started comming out from the motherboard when i connected 4 pin(only)
    either this card aint holding its reputation or im just a crappy builder (built 6 pc`s last 12 months).
    im usualy MSI when it comes to Motherboards but this one dissapointed

    need to clear some smoke now..
    Laters folks.

  • RELEVANCY SCORE 2.72

    DB:2.72:2nd Time Msi Eclipse Plus Failed d7




    Good day this is linked to my earlier post. The first time I assembled my system with this motherboard it was having problems starting up. Found out later it was the motherboard problem and it was fried. Got a replacement..worked fine for 3 weeks then one day it couldnt detect my boot disk. Had to restart my machine, pressed restart button and Pfzzt.Pop there goes the motherboard.

    Whats going on? Anyways both motherboard and power supply have been sent back to manufacturer in Taiwan to be looked at and replaced under warranty. Really disappointed by this board.

    the OC I did was pretty standard and very conservative. Base clock set to 166~167; rest on auto. It was stable but this is the 2nd time the board has fried. (the first time; i didnt even OC at all)

    Your comments, anybody?

    Regards

    DB:2.72:2nd Time Msi Eclipse Plus Failed d7


    Rebuilt the machine with new parts works like a dream. Will leave this forum though since Im now using Asus Rampage Extreme 2. Thanks for your help. Much appreciated everybody.

  • RELEVANCY SCORE 2.72

    DB:2.72:Msi R7970 And Msi K8n Diamond Plus (Ms-7220) Compatibility Question s7




    Please will MSI R7970-2PMD3GD5 graphic card work in MSI K8N Diamond Plus (MS-7220) motherboard?
    I read conflicting stories so I would like to get opinion from here. Is old PCIe version (1.0) on MB an issue? Will card work even though it is PCIe 3.0?
    Thanks in advance, Jiri

  • RELEVANCY SCORE 2.72

    DB:2.72:Diamond Plus ms




    will my psu the seasonic s12 600w work with msi diamond plus? Does it require anything more than the 24pin and 4pin connector?

    DB:2.72:Diamond Plus ms


    mine has one. I just ordered the msi diamond plus and an opteron 148. Im just sick of my 3800+ venice holding my 7900 GTX back. I hope i can get a nice overclock on the msi diamond plus

  • RELEVANCY SCORE 2.72

    DB:2.72:Msi Eclipse Sli Lga1366, Does It Support Nvidia Gtx 780 Ti Gpu? 7x




    MSI ECLIPSE SLI, does it support Nvidia GTX 780 GPU?

    I need to urgently upgrade my GPU (currently using GTX 285 FTW) but am not ready to upgrade the mobo and all other stuff. So as a temprorary solution I would like to buy and install a new GTX 780 Ti into my MSI Eclipse SLI / i7 920 Win7 system. I think GTX 780 is a PCI-E gen. 3 card, while Eclipse seems to have gen.2 PCI-E slots.

    I have a new platinum 1000W PSU already installed, so cabling/power shouldnt be a problem.

    Will GTX 780 Ti run on my Mobo and if yes, will it be much slower due to PCI-E gen.2-gen3 differences, etc.?

    Thnaks in advance!

  • RELEVANCY SCORE 2.72

    DB:2.72:3 New Msi Nforce4 Boards! 7d




    MSI debuts new K8N series motherboards based on new Nvidia chipsets

    http://www.digitimes.com/mobos/a20050922PR203.html

    Hmmm....what will integrated graphics do for the K8N Diamond Plus!?

    DB:2.72:3 New Msi Nforce4 Boards! 7d


    SAB,

    Toms Hardware has a review of the new Mobos with Integrated Graphics, (I know, I know PIV is the devil, but it sould give a good idea of what the AMD Mobo will be like.)

    Three Premium nForce4 Motherboards from Gigabyte, Jetway, and MSI

    Take Care,

    Richard

  • RELEVANCY SCORE 2.71

    DB:2.71:Wanted: A Link On A Correct Eclipse Mdb Project 93



    Hi

    I could not find an Eclipse project with Message-Driven Bean that is deployable on JBoss without errors.

    It would be great to get a very simple native Eclipse project that was done without a lot of manual manipulations from scratch with an MDB plus a test web page or a test console client.

    I use EnterprisePlatform-5.0.1.CR2 and Eclipse Java EE IDE for Web Developers(Version: Helios Release Build id: 20100617-1415).

    Thank you in advance for any reference.

  • RELEVANCY SCORE 2.71

    DB:2.71:Je Ne Peux Plus Lire Les Fichiers .Msi c3


    Bonjour,

    DB:2.71:Je Ne Peux Plus Lire Les Fichiers .Msi c3

    Je ne suis pas dans les 2 derniers cas. J'ai lancé regcross mais cela n'a rien changé. Le problème c'est que j'ai voulu ouvrir le fichier msi avec un autre logiciel (dans la liste) et le programme utilise toujours le même programme. Comment faire pour
    annuler cette action?

  • RELEVANCY SCORE 2.71

    DB:2.71:Moved: Msi K8n Diamond Plus - Please Help 1z




    This topic has been moved to BIOS.

    https://forum-en.msi.com/index.php?topic=95480.0

    DB:2.71:Moved: Msi K8n Diamond Plus - Please Help 1z


    This topic has been moved to BIOS.

    https://forum-en.msi.com/index.php?topic=95480.0

  • RELEVANCY SCORE 2.71

    DB:2.71:Should I Flash My New Eclipse Plus? xz




    Hi

    I will be getting Eclipse Plus and will be using 2 way SLI and maybe even 3way SLI with it.
    with DDR3 1600, OC.
    with i7 920, OC.
    Do I need to flash and update its BIOS.
    Anyway, I have not bought the board yet but I am preparing all the information and stuff I will be needing in advance.

    Thanks!

  • RELEVANCY SCORE 2.70

    DB:2.70:Moved: Msi K8n Diamond Plus Multipler f8




    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=97217.0

    DB:2.70:Moved: Msi K8n Diamond Plus Multipler f8


    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=97217.0

  • RELEVANCY SCORE 2.70

    DB:2.70:Msi Eclipse Sli Bios V1.5b3 d8




    No changelog.

    All at your own risk, anything you break or damage is entirely your fault.

    Only click if you agree to the above

    DB:2.70:Msi Eclipse Sli Bios V1.5b3 d8


    No changelog.

    All at your own risk, anything you break or damage is entirely your fault.

    Only click if you agree to the above

  • RELEVANCY SCORE 2.70

    DB:2.70:Moved: Msi X58 Eclipse Sli Cpu Throttling Problem az




    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=128074.0

    DB:2.70:Moved: Msi X58 Eclipse Sli Cpu Throttling Problem az


    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=128074.0

  • RELEVANCY SCORE 2.70

    DB:2.70:Replacement Chipset Coolers That Fit The Msi Eclipse? ks




    The title pretty well sums up the question, I need some North and southbridge coolers that will fit the mountint holes (low profile for the southbridge) on my MSI Eclipse Motherboard.

  • RELEVANCY SCORE 2.69

    DB:2.69:Moved: Msi Eclipse Memory Question 9d




    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=123915.0

    DB:2.69:Moved: Msi Eclipse Memory Question 9d


    This topic has been moved to Intel Core I7 boards.

    https://forum-en.msi.com/index.php?topic=123915.0

  • RELEVANCY SCORE 2.69

    DB:2.69:Moved: Over Clock Msi Eclipse ak




    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=126654.0

    DB:2.69:Moved: Over Clock Msi Eclipse ak


    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=126654.0

  • RELEVANCY SCORE 2.69

    DB:2.69:Cleared Cmos With Power On!!! 71





    you know that nice big flashy button that says clear CMOS tho only while power is off? .. well ive done it with power on!!!

    current system being ...
    MSI Eclipse PLUS Ver1.0,
    3x 2Gig OCz Tri RAM,
    920 i7 CPU,
    ATI 4870 X2 GPU,
    850W InWin PSU

    graphics card was not responding after 2 months working fine, after some other debug attempts ... i pushed the clear CMOS button ... now im sitting with a mobo that ... serves me right for leaving RTFM till last!!!

    reboots once after (roughly) 10 sec and remains on,
    LED status remains at FF,
    D-LED shows blank display,
    all mobo panel button lights (rst, pwr, overclock) remain on,
    no communication to graphics card,
    status LED is green,
    system fans and processor fans are all on,
    hdd starts tho no activity is heard.

    ive tried ...
    different power supplies,
    different graphics cards,
    different RAM,
    taking mobo battery out, uplugging power, removing CPU, removing RAM, .... removing everything and leaving mobo for 24 hours as such.

    ive seen that a bios can be loaded from a usb disk? searched MSI website for documentation regarding this tho nothing found ... would it even help?

    DB:2.69:Cleared Cmos With Power On!!! 71


    I think you have a high chance of BIOS corruption. You can try flashing the BIOS again but I do not think it will help much. Your best bet now is to RMA the board.

    Use the MSI HQ Forum USB flasher

  • RELEVANCY SCORE 2.69

    DB:2.69:Odd Ram Problem On Eclipse Plus 3d




    Hi all. I was wondering if you might be able to help me out with an odd issue Im having. Here are the details of my build:
    Cooler Master ATCS 840
    MSI Eclipse Plus
    Intel Core i7 960
    3x2GB OCZ low voltage (1.65v) DDR3-1600 (PC3-12800) at 8-8-8-24 (product page here)
    Sapphire Vapor-X Radeon HD 5870

    Here is the story of what is going on: When I first got everything assembled and powered on, nothing would come up on the screen. After a bit, it would reboot. When I checked the debug LED, it would halt on d4 (initialize memory). So I made sure that the three sticks were in the proper spots (A0, B0, C0), and they were. So I came here in search of advice and saw the suggestion to try just one stick. Lo and behold, I finally was able to make it to the bios menu. So I played with the RAM settings, saved, and reboot. It worked fine. Then I tried repopulating the RAM, and the same hold on d4. So I pulled them again and tried each stick individually. They all would make it to the bios. Also, all of them would take the changes to the RAM settings except for the serial number ending in -3. So I tried with just -1 and -2, and still cant make it to the bios. So it seems that the only way I can get past the d4 is by having a single stick installed.
    So..... does anybody have any ideas as to what may be going on and/or something else I can try to get things working?

    DB:2.69:Odd Ram Problem On Eclipse Plus 3d


    Looks like everything is going in the right direction so far.

  • RELEVANCY SCORE 2.69

    DB:2.69:Only One Ram Slot Works! x9




    Hey, I just assembled my computer after having installed a new CPU and water cooling. But now there is only one RAM slot that works ... and funny enough it is the middle one! Non of the other works.

    I have tried all slots and all sticks, but it is only the one slot that works right now.

    So when I put all three sticks in, it only shows 2GB.

    I have also tried a BIOS update, but that didnt fix the problem.

    What should I do! Could it be the CPU in any way? ...

    My system:
    MSI Eclipse Plus
    Core i7-975
    Kingston HyperX 2000MHz 3*2GB

    It worked perfectly before whit my 920 CPU.

    DB:2.69:Only One Ram Slot Works! x9


    Thats great news! Hope you got it solved soon .

  • RELEVANCY SCORE 2.69

    DB:2.69:Msi Eclipse Plus Startup Problem x9




    Hi,
    I have the MSI eclipse plus motherboard, but I have a strange startup problem.
    Sometimes my computer fails to start up. When I try again sometimes it works fine. (without changing any hardware or software configuration)
    The Eclipse plus has a small D-led2 panel that shows information about the startup phases.
    When my startup fails, the panel mentions: CPU init. And the error Code is FF (this means: power on and first initialize CPU)
    (This is the phase just before DDR init).
    So the startup fails in a very early stage of the startup process, (before I can access my bios)
    When the start up fails, I have to disconnect the power cable, reconnect and try to start again. This is a very uncomfortable situation.

    I have the latest BIOS version 21/04/2009 V1.0
    I tried the fail-save default options in the bios.
    My processor is i7 940
    RAM: OCZ DDR3 . 6 pieces of 2GB. 1600Mhz (3 dual channel kits)
    Power supply: Corsair 1000Watt

    I hope somebody can help me.
    Thanks in advance

    DB:2.69:Msi Eclipse Plus Startup Problem x9


    Quote from: TonyAlosta on 06-July-09, 19:18:15

  • RELEVANCY SCORE 2.69

    DB:2.69:N295gtx-2d1792 No Sound Via Hdmi pa




    i have msi eclipse plus MB and the sound card (pci express x-fi extreme) that came with MB.

    I have correctly connected both spdif connctors on vga card and my sound card.

    my sound card has 3 pin (GND, SPDIF, VCC) and the internal cable that came with video card only has gnd and spdif, so I didnt use vcc.

    i connected my pc to tv via hdmi, but i only have video. I went to control panel and changed sound device to digital output device (spdif). I can see the volume meter going

    up and down when i play music, but no sound. tried using NVIDIA and MSI driver. PLZ help

    DB:2.69:N295gtx-2d1792 No Sound Via Hdmi pa


    In your picture...

    you need to click on the Digital Output Device (SPDIF) and then click on the [Set Default] button, and then Apply.

    Otherwise, sound will just come out of your speakers, connected to the green jack on your soundcard, and not through the HDMI port.

  • RELEVANCY SCORE 2.69

    DB:2.69:Moved: Msi X99s Sli Plus Usb 3.0 Disconnect zz




    This topic has been moved to MSI Intel boards.

    https://forum-en.msi.com/index.php?topic=253044.0

    DB:2.69:Moved: Msi X99s Sli Plus Usb 3.0 Disconnect zz


    This topic has been moved to MSI Intel boards.

    https://forum-en.msi.com/index.php?topic=253044.0

  • RELEVANCY SCORE 2.68

    DB:2.68:Msi K8n Diamond Plus + Corsair 3500llpro 78


    Hi - can anyone help with what the ram settings shold be for the MSI K8N diamond plus, using the twinx 3500llpro 2gb unbuffered kit.

    DB:2.68:Msi K8n Diamond Plus + Corsair 3500llpro 78

    You can follow the link in my signature for the tested settings, just load setup/optimized defaults before you start!

  • RELEVANCY SCORE 2.68

    DB:2.68:Msi Eclipse Plus Motherboard Featuring Nf200 Chip Is It Worth The It???? km




    Well MSI have launched there i7 with NF200 support according to some uk sites and the price is like ouch ouch and ouch again £350ish. Also it seems from some reports on the NF200 it slower that the X58 without the chip so is it really worth the money? Or are we been ripped of by the computer industry.

    DB:2.68:Msi Eclipse Plus Motherboard Featuring Nf200 Chip Is It Worth The It???? km


    I agree with HU16E that they should test with a wider range of cards cause they very from on maker to another as i have found when testing the hd4870 and the 4850s benchmarks can be as much as 10-15 diffrent on what is sold as the same card. So benchmarking should be done from at least 3 of the supplies of the card been tested, this would also show pepole that sometimes it worth paying a bit more for the same card and that all are not equal

  • RELEVANCY SCORE 2.68

    DB:2.68:Moved: Eclipse Plus: Bclk Settings Won't Stay 39




    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=128365.0

    DB:2.68:Moved: Eclipse Plus: Bclk Settings Won't Stay 39


    This topic has been moved to Overclockers Modding Corner.

    https://forum-en.msi.com/index.php?topic=128365.0

  • RELEVANCY SCORE 2.67

    DB:2.67:Msi Eclipse Plus, Sli, Pci And Double Hieght Graphic Cards. af




    Im intrested in building a system with the Eclipse Plus and 2 card sli setup.
    The manual states that for a 2 way sli, graphic cards should be placed in slots top 2 pci slots. MY graphic cards are double height so placing them in these slots would block out the only pci slot available which I need
    Is it possible to mount the graphic cards in the first and 3rd slot and still achieve sli?

  • RELEVANCY SCORE 2.67

    DB:2.67:Eclipse Plus- Bios/ Overclocking p9




    Although i am not having problems with my mobo as it runs stable and all, i cant run permanently at my overclock speed of 3900mhz. The system de-clocks which saves power, etc but i want to run at full speed all the time. With the BIOS revisions is there options to fix this and if so where can i get these bioss as the only one on MSI is version 1. See here all talking of v 1.3 and 1.4 but o cant to download them

    DB:2.67:Eclipse Plus- Bios/ Overclocking p9


    Thanks for the reply and information, will try it now