• RELEVANCY SCORE 3.01

    DB:3.01:Error In Summarise Function fa




    Hi,
    I have a table named feedback with two columns - Date and Organised By. The Organised by column has Client names.
    I want to generate a table where I Group by Organised by column and count the unique dates
    I wrote the following calculated field formula (name is Sessions conducted by client) to compute Sessions conducted per client
    =SUMMARIZE(Feedback,Feedback[Organised by],Count of sessions,DISTINCTCOUNT(Feedback[Date]))
    When I click on Check formula, I get the following error
    Calculation error in measure 'Feedback'[Sessions conducted by client]: The expression refers to multiple columns. Multiple columns cannot be converted to a scalar value.
    Could you please correct my formula above.
    Once the error is resolve, I will pass it to a function which will return require a Table input.
    Pleas help.

    Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

    DB:3.01:Error In Summarise Function fa

    Hi,
    Thank you for clarifying. I used the following calculated field formula to compute the sessions conducted at Top 10 clients
    =sumx(TOPN(10,SUMMARIZE(Feedback,Feedback[Organised by],Count of sessions,[Sessions conducted]),[Sessions conducted],0),[Sessions conducted])
    Sessions conducted is a calculated field computed as follows
    =DISTINCTCOUNT(Feedback[Date])

    Thank you for your help.

    Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

  • RELEVANCY SCORE 3.01

    DB:3.01:How To Summarise A Text In Pages? 8p




    I am trying to summarise a text - I know Word can do it but wondered if I can do this in Pages?

    DB:3.01:How To Summarise A Text In Pages? 8p

    Ahh that date gives it away!Just looked it up, it comes from NeXTSTEP. I can't remember exactly which version of OSX first got Services but am pretty sure it was one of the later ones and only in Snow Leopard did we finally get the means to organise them. Prior to that it was a mess of stuff installed by other applications behind our backs and with no obvious origin or explanation of what or how they do what they do.Like much of Apple's efforts these days unfortunately. Peter

  • RELEVANCY SCORE 3.01

    DB:3.01:Eigrp Design md





    Does anyone have any URL'sn with best design principles for large EIGRP networks. In particular EIGRP with different AS's and advice on the best way to re-distribute and summarise.

    DB:3.01:Eigrp Design md


    http://www.cisco.com/warp/customer/103/index.shtml

    http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd2003.htm

  • RELEVANCY SCORE 3.01

    DB:3.01:Need Some Information j3



    Hi Experts,

    I need small information on below.

    Summarise Infotypes and what they should be used for.

    Thanks all in advance.

    Regards,

    Sekhar.

    DB:3.01:Need Some Information j3


    hi sekhar, can you please make your post less specific? I was completely mislead by all its detail when once I read the question.

    btw, link above is good answer to your question.

    cheers.

  • RELEVANCY SCORE 2.99

    DB:2.99:Function Datepart pf



    Hello

    I am attempting to use Datepart function but in the log i end up with the error:

    Error: Function Datepart requires a numeric expression as argument 1

    Any suggestions?

    Fred

    DB:2.99:Function Datepart pf


    See this page when you get a chance, for help on working with data in SAS.

    http://www.ats.ucla.edu/stat/sas/modules/default.htm

  • RELEVANCY SCORE 2.95

    DB:2.95:Re: sx


    I got Lots of useful input from this week's Error handling discussion... but
    I still need this.

    I'm curious-- what's the best method to structure the Local symbol?
    Does the Larger function store the *error* function... or the Nested
    function?

    Example..
    (defun function-to-store-"current"-modes ( / *error*)
    ;; - store system settings -
    )

    (defun Do_this ( / *error*)
    (function-to-store-"current"-modes )
    ;; ... - the do_this function
    (function-to-restore-"current"-modes)
    )

    ---

    (defun Do_this ( / )
    (function-to-store-"current"-modes )
    ;; ... - the do_this function
    (function-to-restore-"current"-modes)
    )

    and relying on the ...-restore-"current"... to reset the error handler?

    DB:2.95:Re: sx

    I acquired code a while back that's just a list processor---
    saves sysvar's to a list and later restores it... so the list may vary in
    length... but
    I had a bit of difficulty deciding where to start and finish it.
    getting clearer, now. Thanks again, all!

    "Kevin Nehls" wrote in message
    news:2711D979A8E7ADA3BAFBCDB57FFC21B3@in.WebX.maYIadrTaRb...
    Yea, most of mine don't vary that much either, but I'm usually changing
    different variables (which is solved by using Frank's ChangeVars routine,
    http://code.acadx.com/autolisp/006.htm). But I might have one or two
    things
    different in my error handler for most of my main routines, so I end up
    having to define them locally anyway.

    I mean, instead of defining *GlobalErrorHandler*, define it at *Error*.
    If
    you use that error handler for 99% of your routines as a globally defined
    function you don't need to use setq for setting *error*, ever. Even if
    you
    globally define *Error*, you can still locally define *Error* to one
    particular routine:

    Contents of acaddoc.lsp:
    (defun *Error* (Msg)
    (restore-stuff)
    (princ (strcat "\nError: " Msg"))
    )

    Contents of Lisp1.lsp
    (defun C:MyLisp1 ()
    (save-stuff)

    )

    In this Lisp1.lsp example *Error* is defined globally for everything and
    that global definition is used by this routine.

    Contents of Lisp2.lsp
    (defun C:MyLisp2 (/ *Error*)
    ;;uses a different error handler than the global one
    (defun *Error* (Msg)
    (restore-stuff)
    (princ "\nC:MyLisp2 Bombed out!!!")
    )

    )

    In this Lisp2.lsp example *Error* is defined within the scope of that
    routine. This "local" definition is used by this routine and only this
    routine. It does not change or effect your global definition of *Error*.
    --
    Kevin Nehls

    "Mark Propst" wrote:

    Do you mean set *Error* to *GlobalErrorHandler* ? as in (setq *error*
    *GlobalErrorHandler* ) ?
    or am I missing something else also?
    And that line would be like in acaddoc.lsp or a .mnl file right?
    That's a cool Idea, I never thought of that.

    Since at the beginning of virtually all routines I get the list of sys
    vars
    that I commonly may change, like clayer cmdecho osmode etc and then the
    error handler just resets to those global vars. and closes the undo
    group,
    so really I don't do much specific with routines that varys as far as
    the
    error handler is concerned. Not too sophisticated me!



  • RELEVANCY SCORE 2.88

    DB:2.88:How To Add New Summarised Field In Cross Tab ? x3



    Dear Experts ,

    I designed a cross tab report and every thing is working fine .., Now i need to add a new summarise fields next to Actual amount .

    I create a formula Total

    if isnull ({R00068_2.BUDGETED_AMOUNT} )

    then

    0

    else

    ({R00068_2.ACTUAL_AMOUNT}/{R00068_2.BUDGETED_AMOUNT})*100

    But i am not getting correct amount ,getting same total for every group . Please check my image file , What formula i need to write .

    DB:2.88:How To Add New Summarised Field In Cross Tab ? x3


    Its Really Helpful ,

    Thanks Abhilash ,

    I Tried in CR version 13 there is no option available , so now I downloaded trial version of CR Version 14 , designed in that and I will use in Visual Studio ...

  • RELEVANCY SCORE 2.87

    DB:2.87:Summarize I/O Server For Visualiser ds



    Ask a daft question, but what does this actually do to the output from a Manager run in Visualiser (Manager - Advanced Features - Visualiser - Summarise I/O Server for Visualiser) :?: Regards...Mike.

    DB:2.87:Summarize I/O Server For Visualiser ds


    Excellent. Many thanks for your time and effort in replying Perry.It makes sense now Regards...Mike.

  • RELEVANCY SCORE 2.82

    DB:2.82:Rich:Scrollabledatatable Oncomplete Function Undefined jj



    Hello,I get an error in a4j:log when nesting a scrollableDataTable in a tabPanel:
    Error evaluate oncomplete function undefined

    DB:2.82:Rich:Scrollabledatatable Oncomplete Function Undefined jj


    "rosdorff" wrote:I had one h:form too much around the rich:tabPanel.Is working fine now.Hi, does it mean you problem has been resolved? Best Regards, Tsikhon Kuprevich

  • RELEVANCY SCORE 2.78

    DB:2.78:Any Benefits Of Using A Keep Statment In A Proc Tabulate? 8p



    Are there any performance benefits of using a Keep statement in a Proc Tabulate (or Means / Summary / Report)? I am looking to reduce the time taken to summarise the data without using an index on the initial dataset.

    Thanks.

  • RELEVANCY SCORE 2.74

    DB:2.74:Lightswitch Windows Azure Issue dc


    Hi
    I have create a very simple Contact application with LS and trying to deploy it to the Windows Azure using my free trial.
    I am pretty confident that all the instructutions have been followed in the guide show on the LS Develper web page, however, I get the error message, Could not connect to Windows Azure using provide Subscription ID and certification.
    To summarise,
    1) I have checked the Subscription ID several times.
    2) The certification has been added in the Window Azure Portal using the Copy Path button. The certificate is also showing up in the drop down.
    3) The certification is showing up as being created under my Windows Azure portal
    Any ideas what could be the reason for the connectivity failure?
    Many Thanks

    DB:2.74:Lightswitch Windows Azure Issue dc

    It sounds like you may have forgot to go in and add IP's that the database accepts incoming connections from? From what I understand, SQL Azure DB's only accept incoming connections from the IP ranges that you explicitly specify.

  • RELEVANCY SCORE 2.73

    DB:2.73:Ods Cube 9a



    Hi All,

    will the ODS allows duplicate records. If so which table allows it.

    What is the use of unique data records option in ODS settings.In this

    case will duplicate records aggregate or summarised.

    will the Info Cube allows duplicate records.If so in reporting side

    how the duplicate records will be?

    I mean whether they will aggregarte or summarise.

    Thanx in advance,

    Yogesh.

    DB:2.73:Ods Cube 9a


    1) ODS will allow all unique records for the combination of Primary key fields present in the ODS. You can have the Key fig as additive or overrite in the update rules.

    2) Cube will always be additive for the unique combination of dimentions. For eg: if you load the same record second time then the value of the key fig would be doubled.

  • RELEVANCY SCORE 2.71

    DB:2.71:Where-Clause With Function(Entered Static Parameter) p8


    Hello,

    I have no clue on the way to deal with this issue.
    Basically, for performance, I removed a join with a table, and replaced it by a call to a function within the where clause. This function only convert the entered date into an id, in order to compare with the id in the selected table.

    I knew (I think I'm right!!) that if I put a function into a where-clause, then the function is called at each row.
    As the parameter of this function is a Discoverer parameter, and therefore, it's a static value, I wanted to know whether with Discoverer, there would be a way to convert the entered Discoverer parameter value into a constant that I could use within my where-clause.

    To summarise, hete is the face of my query, at the moment:
    SELECT myColumns
    FROM myTables
    WHERE thisID myConvertedDate(:RefDate);

    I would like to do this :
    The User enters the :RefDate, I convert it and save the result into a constant.
    Then, my query would look like :
    SELECT myColumns
    FROM myTables
    WHERE thisID myConstantFromDate;

    I hope that my explanation is clear, and that one of you will be able to advise me.

    Thanks,
    Olivier

    DB:2.71:Where-Clause With Function(Entered Static Parameter) p8

    Hello Nigel,

    I am not too sure that the function is called at each row. This is just my thought, from my "average" knowledge of SQL. We cannot run tkprof at the office, in order to get a better understanding.

    And also, the fact that goes towards this direction is that, when I add the call to my function in the where-clause, I have the impression that the query runs more slowly than without the call.

    I reckon that it would be great if the optimizer notices that the function is called with the same value, and returns always the same result.

    Thanks for your comments,
    Olivier

  • RELEVANCY SCORE 2.70

    DB:2.70:Update Failed Error 8002f14e - Any Help? 3x


    To summarise. Playstation broke, replacement sent, day off work to receive.

    It arrives, I slot in mydrive, fail to save the data and have to format the drive. Groan.

    I went to sign in to my psn account and was prompted to install an update. It failed with error 8002F14E, and now its getting to 99% and freezing. I turn it off, restart and it does the same thing. Groan.

    I havent called Sony yet, suspect they will tell me they will send another one, and i'll have to sit about again and wait for it. Anybody got any suggestions before this?

    Thanks




    Capital H, Number 0, Capital P, Number 5

    DB:2.70:Update Failed Error 8002f14e - Any Help? 3x

    There's a list of error codes somewhere on this site... Check that to see what you're dealing with if you haven't already... Other than that if it was me I'd need to be giving Sony a ring... They might be able to offer suggestions over the phone on what to try... Catch 22 you've got yourself here... Sorry I can't really help... Hope you get it sorted without having to wait on another console being sent out

  • RELEVANCY SCORE 2.69

    DB:2.69:Map 4.0: Problems With Authentication In A Single Forest, Multiple Domain Environment j1


    I am trying to scan our servers across a relatively complex environment.We have 10 domains, running to 4 levels deep. To summarise for a later example:    Root.local        child1.root.local               grandchild1.child1.root.local        child2.root.local        child3.root.local               grandchild3.child3.root.localI have a problem when entering the username/password of accounts in certain domains.MAP is installed in the Grandchild1 domain. I have no problems scanning this domain, either by Active Directory or Windows Networking.However, I get the error Login failure while connected to Active Directory, invalid username or password. Specify a valid user name and password and try again when I enter Root\Root_Administrator or Child1\Child1_Administrator account details. I installed a packet sniffer, and I discovered that when I enter the Root\Root_Administrator details, what is actually sent over the network is Grandchild1\Root_Administrator.Put simply, in the Domain Account field it pays no attention to the DOMAIN when entering DOMAIN\User.Obviously it refuses to accept the userPrincipalName format.DNS and WINS resolution works fine. I can browse the NetBIOS domain names in Explorer without problems and DNS lookups correctly resolve the various domains. I have experienced this problem on both XP SP2 and Server 2003 R2.Bug? Is is worth opening a support incident?Thank you in advance,Phil.

    DB:2.69:Map 4.0: Problems With Authentication In A Single Forest, Multiple Domain Environment j1

    Phil -Can you send your email address to me at mapfdbk@microsoft.com so that we can pass on the URL to get the QFE bits?Rob

  • RELEVANCY SCORE 2.69

    DB:2.69:Home V1.10 Bug Summary - Localisation And Translation dk


    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

    DB:2.69:Home V1.10 Bug Summary - Localisation And Translation dk

    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

  • RELEVANCY SCORE 2.69

    DB:2.69:Visa - Unable To Queue Operation Device Reported An Input Protocol Error. 7x



    To summarise I have two main questions:

    How can I clear the VISA operation queue and what causes an input protocol error during transfer?

    I am using a Tektronix AFG3022B Function Generator with latest firmware connected via USB and LabVIEW 2013 SP1 patch 2 (13.0.1f2) 32bit with NI-VISA 5.4.1.

    If I have a small timeout, say 100ms, and perform a save operation and op complete query on the device (*SAV 1;OPC?), then do up to 10 VISA reads; the first few reads time out (as expected), but then I frequently get the following error:

    -1073807305 (0xBFFF0037) VI_ERROR_INP_PROT_VIOL. "Device reported an input protocol error during transfer."

    Once this occurs, the whole VISA session seems to become unstable and lots of the read operations fail returing this error code and not the timeout error (0xBFFF0015 (VI_ERROR_TMO)).

    This only seems to happen when I do save/recall operations (either internal or to a mass storage device connected to the instrument), all other commands/queries timeout for the first few reads (as expected) then return the value. Do you think this is probably down to poor instrument firmware/hardware? Or am I using the VISA incorrectly? I would have thought that attempting to read VISA data to soon should only generate a timeout error and not a protocol error.

    Reason for small timeouts:

    Instead of setting the timeout to 4 seconds and having no way of cancelling the read operation I set the timeout to 100ms and run a for loop up to 40 times ignoring timout errors unless it's the last loop iteration. This means I can the operation within ~100ms.

    What causes the VISA protocol error? I can't find much information on it.

    Once the protocol error occurs and I keep repeating the *SAV command, I get the following error:

    -1073807303 (0xBFFF0039) VI_ERROR_IN_PROGRESS. "Unable to queue the asynchronous operation because there is already an operation in progress."

    Once this error occurs, how can I force a clear on the VISA queue without unplugging/power cycling the instrument?

    Some NI I/O trace captures attached to show what happens and test VI.




    Using LV2013 SP1

    DB:2.69:Visa - Unable To Queue Operation Device Reported An Input Protocol Error. 7x


    I thought I would try to duplicate your problems, but I only have a Tektronix TDS Scope that has USB.

    I am a big fan of using *OCP? to sync instruments control and your problem is of interest to me

    This very simple write/read returns the *OPC '1' return char consistently between 175-185 ms. No problem

    Trying your short timeout with a loop, I do not get what I or you expected.

    If I run this with an adequate timeout (something well longer than the needed 185 ms) it returns in between 175-185 ms with one time through the for loop. As expected. No problem.

    BUT!If I try setting the timeout to something below the needed 175 ms like your 100ms...

    Sometimes it works but it takes over 2000 ms to return but only goes though the for loop twice.

    But sometime it does not work at all, taking well over 10 sec to exit out of the for loop with a timeout error.

    I never see the queue error that you are seeing

    How long does it take to do a simple *SAV

    I don’t think the queue error is coming from the instrument. You would have to send the instruments the SYSTEM:ERROR? Request before the instrument would report any of the instruments errors.

    Be sure to set your Termination Char setting. I prefer to turn it off for the Writes so I control when to send it. But turn it on for the Reads

    Also I noticed from your trace files that you use the *OPC? after a *IDN?. This is not needed as you will know the *IDN? is complete when your received the string back. In fact my Tektronix scope did not like it if I sent it "*IDN?;*OPC?\n". It would not send me anything back, not even the IDN.

    Is the SAV command on your instrument so long that you need to be able to break out of the loop?




    Omar

  • RELEVANCY SCORE 2.62

    DB:2.62:Home V1.10 Bug Summary - Character Customisation mj


    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

    DB:2.62:Home V1.10 Bug Summary - Character Customisation mj

    Hi Revs, the report section for Character customisation is still missing



  • RELEVANCY SCORE 2.61

    DB:2.61:Error In Import/Export Of Functions - For The Apex Team jf


    After exporting functions, the import gives an error.
    Reason :
    the export generates a script with
    function \
    function

    importing this script gives an error because only the first function is imported. or the functions seems to be togheter one function

    the export should generate
    function
    \
    function

    Leo

    DB:2.61:Error In Import/Export Of Functions - For The Apex Team jf

    Scott,

    Teh reason can be that I have looked after the content with notepad, and saved the file.
    Sorry for the incovenience and thanks for your efforts.

    BTW Indeed, I meant /

    Leo

  • RELEVANCY SCORE 2.61

    DB:2.61:Triigering Two Cards From One Trigger 7c



    Here is a quick question - in the diagram below it shows two cards (DEV1 and DEV2) being triggered from the same device (DEV1).

    The way I understand LabVIEW is that once it is setup and sitting waiting for the triggerit becomes indpenedant of sofwtare making it more accurate in time.That is fine for DEV1 using a DEV1 trigger, what happens if DEV2 is using a DEV1 trigger does it incur a time cost does it use software in order to begin acquiring ADC data.

    I suppose to summarise what I am asking is,

    (1) If I wired the trigger into one device and then on my VI made both devices look at that trigger will it be less accurate than if I (2) phyiscally wired the sametrigger to both DEV1 and DEV2 via a SCB-68 and then in the VI made them look at their own device trigger.Is(2) more accurate because I am using both the cards hardware to begin data acquisition and in (1) I have one card which is relying on sofwtare to tell it tha something is triggered. If this is a case is it really an issue anyway, i mean isdo I really incurlarge error in timing (a1ms is bad timing in my case)?

    DB:2.61:Triigering Two Cards From One Trigger 7c

    Hello Mr Nice,

    Using a RTSI cable between your devices will be the way to go to achieve what you wish. Theres a great article on the NI DeveloperZone that discusses the different possiblities of Multifunction and Multidevice triggering and synchronisation, you can read it here: M Series Synchronization with LabVIEW and NI-DAQmx

    Hope this helps
    TomNIUK

  • RELEVANCY SCORE 2.60

    DB:2.60:The Legends That Are...... 9k



    FrankstaPasta and Chewybacon

    now, people in this - the lovely GD seem to think that we're going out or something

    THIS IS NOT TRUE

    we're two parts of the best friend trio of Franksta, Chewy and Cheesecake - he just doesnt come on the forums so much

    so, to summarise;

    Me and Chewy are not a couple

    all cool? *hug*




    RAWR.

    DB:2.60:The Legends That Are...... 9k

    chewybacon wrote:Hyperguy20 wrote:I DEMAND A PIC OF TEH CHEESE! NOAW! #We look drunk xD

    *****? chewy!!! thats not ME on your shoulder its Jon!!!! what the hell! my nose is at least a quarter of the size of his!




    RAWR.

  • RELEVANCY SCORE 2.60

    DB:2.60:Crm 2011 Rollup 2 Javascript Error. sf


    I am working on upgrading our CRM 4 system to CRM2011. Things were mostly working beside the plugin issue which I asked

    here. Today I did a manual upgrade to CRM2011 Rollup 2 and now most of my pages have this error

    ScriptErrorDetails
    MessageObject doesn't support property or method 'get_$C0'/Message
    Line0/Line
    URL/main.aspx/URL
    PageURL/main.aspx/PageURL
    Function(eventCode,parameters)/Function
    CallStack
    Function(eventCode,parameters)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function($p0,$p1,$p2,$p3,$p4)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function(eventCode,parameters)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function($p0,$p1,$p2,$p3,$p4)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function(eventCode,parameters)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function($p0,$p1,$p2,$p3,$p4)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function(eventCode,parameters)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function($p0,$p1,$p2,$p3,$p4)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function(eventCode,parameters)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    Function($p0,$p1,$p2,$p3,$p4)/Function
    Function(eventCode,parameters,sourceComponent)/Function
    /CallStack
    /ScriptErrorDetails

    Which I considered as a good thing because the java script problem might have been there to begin with. But now the new version is able to display to us.
    My question is that if I want to modify the offending js files, where can I get them? Customization button in the page was grayed out so I can't get it from the browser.
    Thanks in advance.

    DB:2.60:Crm 2011 Rollup 2 Javascript Error. sf

    Try a repair of CRM using Programs in the control panelRegards Faisal

  • RELEVANCY SCORE 2.59

    DB:2.59:Outlook 2013 Email Sendreceive Problems zd


    I run Windows 8 with Outlook 2013 to access my primaryemail provider account. That provider is a large national company. Three weeks ago, after operating with no problems for over 6 months, the send/receive function went down. In summary,
    I was sent the message that there was a send/receive error. I consulted my email supplier, and we reconfigured the email twice. I can now send emails, but they do not getcopied to the "items received" box. Also, I cannot receive any incoming emails at all.
    Hitting the Send/Receive button tells me that x email are being delivered, followed by a message that the download was successfully completed - nothing appears in my inbox though.
    I can access my incoming email on the Webmail version from my email supplier, but that is not satisfactory. My supplier now tells me I have an Outlook problem. I see from looking on the net that this is a problem others have had or are having. It seems that
    the next step is to uninstall and re-install Outlook 2013 to try and cure the problem. However, I am no techie, and do not know how to do that. I would therefore appreciate
    simple and easy steps for me to follow to try and do the uninstall/re-install work.
    I also want tobe reassured that doing this uninstall/reinstall work will not result in the loss of files, emails etc etc.
    Also, I access Hotmail correspondence via Outlook - will uninstalling/reinstalling work damage or compromise my accessing Hotmail?
    To summarise, advice and help please on how to uninstall/reinstall Outlook 2013 so as to allow my email provision to work as it should do, with downloaded emails going into my inbox and with sent emails being copied to my sent file.

    Steve Pelan

    DB:2.59:Outlook 2013 Email Sendreceive Problems zd

    Don't hold your breath! Since I purchased Outlook 2013 last August, once a month I have lostthe ability to receive email. I can send email but it is like myOutlook Inboxjust gets "stuck." So once a month I have to delete my email account and reload
    it. One month a techie from Microsoft went through the whole process of uninstalling and reinstalling Outlook. Made no difference. If your friend did anything other than deleting and adding your account, I would be interested in knowing what he did. Thanks
    for listening.

  • RELEVANCY SCORE 2.59

    DB:2.59:Syspreped Vista Wim Deployment Error 8j


    Hello,
     
    I've run into a problem when I try to deploy the Vista Business 32-bit Wim I have created. To summarise the situation, I have created a Vista image on my reference laptop (HP 6910p) fully configured as I want it. Everything seems to be working. I sysprep (using v3.14) the laptop using:
     
    sysprep /generalize /oobe /shutdown /unattend:unattend.xml
     
    with a very basic xml file (I have tried various modifications to it so far. Even just running sysprep from the GUI. ) However when the laptop is powered back on (same hardware remember) it stays on the Vista wallpaper with the spinning cursor (with HDD activity) for up to 10mins before displaying the following error message:
     
    setup could not configure windows to run on this computer's hardware.
     
    I have also tried running sysprep in /audit mode which works, and I can redeploy the pre-sysprep WIM back onto the laptop without issue. Anybody had a similar issue? I'll supply more info on request if it will help.
     
    Any help appreciated!
     
    DaveW

    DB:2.59:Syspreped Vista Wim Deployment Error 8j

    I've looked at several guides as to how to build a sysprep.xml file using WSIM.  and it shows that things like the product key can possibly be entered at different points of the file.  I have a file that looks complete and passes the answer file validation tool, but still doesn't work.  i even tried running sysprep without the answer file and i still get the error message windows setup can not configure windows to run on this computer's hardware 
     
     
    what ever help given is greatly appreciated.  Thank you

  • RELEVANCY SCORE 2.58

    DB:2.58:Getting Control Back From Pemnloop() pk



    Is there any way to get orderly control back from the PemnLoop() function?I have the following problem - I am connected to a number of agents, processing events as they come in. If I loose connectivity to an agent, the CallBack registered with PemnRegisterUserMessageHandler() is called with an appropriate error message, and then I receive no more events from that agent. I would like to be able to regularly attempt to re-connect (say every 5 minutes), but I am unable to do this as the processing is locked in the PemnLoop. I have attempted to set a signal on SIGALARM and this has limited success, but I feel is a dangerous approach as I am potentially calling a non-re-entrant function(s)To summarise, I require the ability to register my own CallBack routine with the API, that will be called at specified intervals from within the main loop - Help!

    DB:2.58:Getting Control Back From Pemnloop() pk


    GeertI am using Patrol 3.5 on a Sun box (SunOS 5.6 Generic_105181-31 sun4u sparc SUNW,UltraSPARC-IIi-cEngine)cksum on my libhandlers.a is 3127790990 72680 Byteshope this helps!Julian

  • RELEVANCY SCORE 2.58

    DB:2.58:Looking For An Analogue To Excel's Pivottable Report In Numbers xj


    Dear fellows,I have a large list of data (expenses chart for my business). There are several columns: type of expense, date, amount and source (cash/bank account). I need to summarise expenses of each king for every month. Is there an apportunity to do this automatically? *I know that similar function in excel called pivot table report.Your suggestions are highly appreciated!Andrey.

    DB:2.58:Looking For An Analogue To Excel's Pivottable Report In Numbers xj

    Hi Andrey,Categories has gone in Numbers 3, but you are on the right track! See this reply from tomogdenin response to Menno06That reply explains the SUMIFS, the COUNTIFS and the AVERAGEIFS functions and others like them to build Excel-like pivot tables.Regards,Ian

  • RELEVANCY SCORE 2.58

    DB:2.58:Possible To Use Swr10 Swr30 Together? kc



    Hi

    Is it possible to use both SWR10 SWR30 together, switching between either of them and summarise it in Lifelog?

    I.e. to use SWR10 in the night and SWR30 at daytime.

    Thanks in advance for a valuable answer.

    //P

    DB:2.58:Possible To Use Swr10 Swr30 Together? kc


    Don't quote me on this but if you are to use one at a time then I see no issue as these devices are linked to an account - There maybe an issue if you try and use both at the same time ie:Conflict




    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

  • RELEVANCY SCORE 2.56

    DB:2.56:How To Load A Sprite Via Www On Ios? z3



    Okay, I've found out, that my problem was indeed path. I've copied my old code and for IOS i had a different path - cuz for System.IO.File u dont need file:// and for www u do need it, so to summarise: I've added file:// at the start, and everything is ok. I just didnt thought it might be the problem, cuz there were no exceptions, and i didnt catch any nulls from the function output.

    DB:2.56:How To Load A Sprite Via Www On Ios? z3


    Okay, I've found out, that my problem was indeed path. I've copied my old code and for IOS i had a different path - cuz for System.IO.File u dont need file:// and for www u do need it, so to summarise: I've added file:// at the start, and everything is ok. I just didnt thought it might be the problem, cuz there were no exceptions, and i didnt catch any nulls from the function output.

  • RELEVANCY SCORE 2.55

    DB:2.55:How Do I Display Or Hide A Java Menu Based On Current Url In A Php Page f1


    How do I display or hide a Javascript menu based on the current url in a php page?

    I want to specify when a java menu appears on a page based on the current url - does anyone have a script for the vars and conditional statements to make this happen - it would be something like this in natural language:

    javascript
    if currenturl = http://jemmakidd.com/categories.php
    then displaymenu
    else if currenturl = http://jemmakidd.com/categories.php?cat=14 (or 15,16 etc)
    then DONOTdisplaymenu

    What is needed is that, if you look at this page there is a java menu under the first category:

    http://jemmakidd.com/categories.php

    I WANT the menu to appear on that page so that is working, however if I look at one of the store categories, like on this page, I do NOT want the menu to appear - it may be that this can be done without using a java current url type function - thats why I'm asking...

    http://jemmakidd.com/categories.php?cat=14

    So to summarise:

    http://jemmakidd.com/categories.php (If this url is used DO display menu - if any other url DONT display menu)

    Thanks again...any ideas?

    Edited by: littlealex2009 on Jul 15, 2009 12:51 AM

    DB:2.55:How Do I Display Or Hide A Java Menu Based On Current Url In A Php Page f1

    Java isn't javascript. Google for a Javascript forum. I'm locking this thread.

  • RELEVANCY SCORE 2.55

    DB:2.55:Summarise The Five Lowest Numbers Out Of Ten 8x


    Hi,
    We have a golf tournament during the summer consisting of 10 separate events with in total some hounded participants. Some of the competitors are only participating in a couple of events while others play them all.

    After the summer, we summarise the five best results for each of the players (1 for the winner, 2 for second place etc). If one player does not participate, they share the last position in that event with the others which do not participate.
    Lowest score in total will be the winner.

    In Excel, I have the players in the first column (starting on line 2) and then the 10 different competitions in the following 10 columns to the right (heading for each competition on line 1).

    How can I in a smart way summarise the five lowest results for each player in a column to the far right?

    Best regards,

    /Lars

    DB:2.55:Summarise The Five Lowest Numbers Out Of Ten 8x

    Glad you got things working to your satisfaction and thanks for the feedback.

    Have you tried turning it off and then on again?

  • RELEVANCY SCORE 2.54

    DB:2.54:Asset Sale With Customer (F-92) With Sales Tax ss



    Hi Gurus,

    Is it possible to post a asset sale in F-92 with Sales Tax directly in FI? If yes, Kindly assist me on the config steps required...

    OR

    Is it possible only through SD-FI integration?

    To summarise,

    My client want to sale a fixed asset to customer Sales Tax entry should be generated... *Is it possible through F-92 *

    Kindly assist on this issue....

    THANKS

    DB:2.54:Asset Sale With Customer (F-92) With Sales Tax ss


    HI,

    In FTXP there will be description right !

    If you are not able to find in FTXP, check out in your tax procedure in OBQ3 you will get an idea what is the account key and corresponding Condition type.

    Thanks Regards

    Om

  • RELEVANCY SCORE 2.54

    DB:2.54:How To Summarise Formula Column 13


    Hello,

    How to take summation of Formula column when formula colunm is in repeating group ? I want to place this summation at the end of report.
    my pl/sql formula is
    function CF_1Formula return Char is
    begin

    if :CS_Anzahl_Layer =1 then
    return FBR_ZAHL_FMT(NVL(:BTR_MR1,0),'999G999G999G999',:P_SPRACHE) ;
    else
    return FBR_ZAHL_FMT(NVL(0,0),'999G999G999G999',:P_SPRACHE) ;
    end if;
    end;

    Regards,

    Jagdish

    DB:2.54:How To Summarise Formula Column 13

    Jagdish,

    it's not possible to summarize a character-function. Ignore formating issues in the function and make a number-function out of it. Summarize the function in a group, which is above the group which contains your function or (in your case) at report level, which could be done on the free screen in the data modeller.

    Regards
    Rainer

  • RELEVANCY SCORE 2.54

    DB:2.54:Totals Values On Task View Incorrect When Any Column Filtered 89


    Hi,

    I have modified various views on the default Tasks list to count the number of entries and summarise the Days to Complete column.
    However, when I filter a column, the overall totals are still shown - they do not adjust to exclude values related to columns not included in the filter. This worked on SharePoint 2010.
    Is there any way of resolving this?

    DB:2.54:Totals Values On Task View Incorrect When Any Column Filtered 89

    Hi,

    I have modified various views on the default Tasks list to count the number of entries and summarise the Days to Complete column.
    However, when I filter a column, the overall totals are still shown - they do not adjust to exclude values related to columns not included in the filter. This worked on SharePoint 2010.
    Is there any way of resolving this?

  • RELEVANCY SCORE 2.54

    DB:2.54:Formula For Adding Another Column x8


    Hi,
    My objective is to summarise a table and then apply a filter to finally count rows in the filtered database.
    In the following post, I will try to explain the logic of every calculated Field formula I am using. When I stitch al individual formulas together, the Check formula reveals No errors in the formula but in the Pivot Table no values appear
    at all.
    So here it goes
    Initial Setup
    I have a table named feedback with two columns
    1. Organised By -
    which contains names of clients I visited
    2. Date - Date on which the visit happened
    If I visit multiple employees of a client on the same day, then the client name and date will repeat. So if I visited 10 employees of client A on January 23, 2013, then Client A will appear 10 times under the Organised By column and so will the date
    January 23, 2013 under the Date column.
    I wrote the following calculated Field formula to determine the Clients visited in every financial year
    =SUMMARIZE(Feedback,Calendar1[FiscalYearKey],clients_visited_per_year,[Sessions conducted])
    My understanding of this formula is that I will get a two column table with FiscalYearKey
    as the first column andClients_visited_per_year as the second column. Sessions conducted is a calculated Field formula computed as:
    =DISTINCTCOUNT(Feedback[Date])
    I then wrote the following calculated Field formula to create a Cartesian product of Organised By and the two column table create from the above SUMMARIZE() function
    =GENERATE(SUMMARIZE(Feedback,[Organised by]),SUMMARIZE(Feedback,Calendar1[FiscalYearKey],clients_visited_per_year,[Sessions conducted]))
    My understanding of this formula is that I will get athree column table with Organised By as the first column, FiscalYearKey as thesecond column and Clients_visited_per_year as thethird
    column. Also, the Clients_visited_per_year will now all show a value of 1because there will now be all unique combinations of FicalYesrKey and Organised By.
    My objective now isto summarise the numbers in the Clients_visited_per_year column by Organised By tocreate a two column table showing the number of years in which the Client was visited. So I wrote the following calculated field formula
    for this
    =ADDCOLUMNS(GENERATE(SUMMARIZE(Feedback,[Organised by]),SUMMARIZE(Feedback,Calendar1[FiscalYearKey],clients_visited_per_year,[Sessions conducted])),Years_of_business,sum([clients_visited_per_year]))
    I now want to count only those rows in the table generated above which have a value of4 in the Years_of_business column. I wrote the following calculated Field formula for this
    =COUNTROWS(FILTER(ADDCOLUMNS(GENERATE(SUMMARIZE(Feedback,[Organised by]),SUMMARIZE(Feedback,Calendar1[FiscalYearKey],clients_visited_per_year,[Sessions conducted])),Years_of_business,sum([clients_visited_per_year])),[Years_of_business]=4))
    When i click on Check formula, the message displayed is No error in formula but no value displays in the Pivot Table (Fiscal years are in column labels of the Pivot Table). I changed the4 to3 but still no change in the Pivot Table.
    Where am I going wrong.

    Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

    DB:2.54:Formula For Adding Another Column x8

    No. Not any more.Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

  • RELEVANCY SCORE 2.54

    DB:2.54:Concentrator 3000 Ospf k9



    Hi all,

    We are having a bit of a problem with our concentrator 3000.

    Version details:

    Cisco Systems, Inc./VPN 3000 Concentrator Version 4.7.2.B Oct 04 2005 05:10:52

    The concentraor is currently on our OSPF area 0.0.0.0

    We would like to move it to a different area so that we can route summarise (There are about 1000 routes in area 0.0.0.0, and the concentrator can't handle it)

    The problem is that when the concentrator won't let us change its OSPF area!

    I have created the new area in Config/System/IP Routing/OSPF Areas

    but when I try to remove the area 0.0.0.0 entry it fails with a

    "Error deleting OSPF Area (Configuration Lock)" or a "Error deleting OSPF Area (General Error)" depending on how it's feeling.

    I tried leaving the 0.0.0.0 area in there, and changed the router it is attached to to the new area, but the Concentrator does not recieve the new routes (I know the new area is working because I have another router recieving them OK)

    When it doesn't work and I change it back, the concentrator just sits there with an empty routing table, and we are forced to reboot it before it recieves the area 0.0.0.0 routes again.

    Can anyone please point me in the right direction?

    Thanks,

    Nick

    DB:2.54:Concentrator 3000 Ospf k9


    Aaaaah!

    Cool I will give that a go when I can arrange downtime :)

    Thankyou!

  • RELEVANCY SCORE 2.53

    DB:2.53:Summarise Failed.. 1d


    We are having an issues that when we try and summarise our project they fail with the following error."Some activities were longer than the maximum length of 100000 hours"Any one have any suggestions to resolve this?

    DB:2.53:Summarise Failed.. 1d

    Yes, that configuration applies to job services (v7 or previous releases) or services with P6 PPM that is basically a windows service. However, In P6 EPPM v8.x you use P6 Services (Java based), that is completely different. I reviewed all the configurations from P6 administrator but couldn't find any similar to "MaxDurationToSummarize".. What P6 version are you using? If P6 EPPM v7, then you can go ahead and test the "MaxDurationToSummarize" configuration. Page 252, http://docs.oracle.com/cd/E16281_01/Product_Manuals/adminguide.pdfIf you are in P6 8.x, then the only workaround that I have found is to change the duration....Hope this helps.Regards, Pablo

  • RELEVANCY SCORE 2.53

    DB:2.53:Eigrp Question sx



    Does anyone have any URL'sn with best design principles for large EIGRP networks. In particular EIGRP with different AS's and advice on the best way to re-distribute and summarise.

    DB:2.53:Eigrp Question sx


    Consult the BSCN book by CIsco Press, it is really a good source!

  • RELEVANCY SCORE 2.53

    DB:2.53:Extract Information From Website z3


    i need to write a program to read the latest stock information from some websites,then summarise the information to generate some reports in my final year project.
    It is because the format of these websites may be changed , so it is difficult to extract correct information from these websites.
    Does any java api can solve this problem?

    thank you

    DB:2.53:Extract Information From Website z3

    http://www.google.com/search?sourceid=navclientie=UTF-8oe=UTF-8q=java+html+parser

  • RELEVANCY SCORE 2.53

    DB:2.53:Options For Remote Authentication To Sharepoint 2010 zj


    Hi,

    I am in the midst of reading about claims based architecture in Sharepoint 2010, and authentication in general - very complicated stuff!
    However, I want to summarise what my options are for authenticating a remote application (e.g. winforms app) with a sharepoint app that a) may be in the same domain (on the same or different server) and b) outside the domain with a lot of network distance.
    Could someone summarise my options for authentication in the above scenarios? I am guessing things like the spcontext only being available on the same server will be an issue (any possible way around that?).

    Thanks

    DB:2.53:Options For Remote Authentication To Sharepoint 2010 zj


    Hi,
    According to my analysis, claim authentication supports cross server in one domain. For cross domain, you can use trust to resolve the issue. Central Administration options allows SharePoint farms to share a trust between their Identity Providers(IP-STS).
    This means that Identity supplied by one can be trusted by another.
    Consider the following scenario, you will have a full view about trust:
    1.A client in the Fabrikam trust domain sends a request to an application in the Contoso trust domain.
    2.The application redirects the client to an STS in the Contoso trust domain. This STS has no knowledge of the client.
    3.Therefore, the Contoso STS redirects the client to an STS in the Fabrikam trust domain. This can happen because Contoso’s STS has a trust relationship with Fabrikam’s.
    4.The Fabrikam STS verifies the client’s identity (he knows people from his domain) and then issues a security token to the Contoso STS.
    5.The Contoso STS uses the Fabrikam security token to create its own token (valid in the Contoso trust domain), which it then sends to the application.
    6.The application recognizes the provider and extracts the client’s claims from the security token. Now it can make its authentication decision.
    Thanks,
    Rock WangRock Wang TechNet Community Support

  • RELEVANCY SCORE 2.53

    DB:2.53:Aggregation In Report 97


    Hi Guys,
    Im using RS 2008R2...
    I have a report which looks something like this...

    Customer No of Visits
    ABC 445
    ABC 545
    ABC 434
    CDE 434
    CDE 564

    Ideally i'd like to group on Customer and summarise the no of visits like:
    Customer No of Visits
    ABC 1424
    CDE 998

    However when i goup on customer i get the following results

    Customer No of visits
    ABC 445
    545
    434
    CDE 434
    564

    What am i doing wrong, ive tried using Sum function but still no luck

    Regards
    Dave

    DB:2.53:Aggregation In Report 97

    Hi Dave,
    You could adopt Rajkumars method of using a matrix control, you could also achieve this using Table control. For detailed steps please follow
    these:
    1.
    Drag the Datafields
    Customer and No of visits to the columns of the table.
    2.
    Right-click the
    (Details) in the Row Groups panel at the left-bottom corner, and then select
    Group Properties.
    3.
    Click
    Add button, then type in a group field in the drop-down list, here you need to select [Customer]
    4.
    Click OK.
    5.
    Type in the expression =SUM(Fields! No of visits.value) in the column No of visits
    Preview the report, you will get the report like this:
    Customer No of Visits
    ABC1424
    CDE998
    If you have any question, please feel free to ask.
    Regards,
    Challen Fu

  • RELEVANCY SCORE 2.53

    DB:2.53:Does Eigrp Process Distribute-List Out First Or Ip Summary-Address? pc



    Say a route has a /24 route in its eigrp top, "distribute-list out" applies a prefix list (only matching that /24 subnet) on a interface to a eigrp neighbor. but on the same interface, "ip summary-addess" summarise that subnet to a /16 subnet. Will the /24 or /16 route be advertised to the eigrp neighbor?

  • RELEVANCY SCORE 2.53

    DB:2.53:Copying Files From Win7 Pro To Dfs Share jd


    Hi, I am having an issue with Win7 Pro writing files to a Win2k3 R2 DFS share, I can copy tiny files (around 200k in size)  however when I try to write a large file (4gb file) I receive the following error: Error 0x8007003B: An unexpected network error occurred. I then tried writing the file directly on the DFS share with \\servername\share however I still received the error, after this I created a brand new share on my file server outside of DFS to which the file was copied successfully, I can also write the file to C$ share. So to summarise, large files cannot be copied to any DFS share on my network but can be copied to shares that are not part of DFS. **Update** Just tried the same test on a completely different system to which the same issue is occurring (this system has had no patches install, no software just registered to the domain).

    DB:2.53:Copying Files From Win7 Pro To Dfs Share jd

    I am getting the same error with a similar operation: copies to a duplication enabled default share folders in a clean WHS with Power Pack 3, but file size doesn't seem to matter.
    I had a few failed backups, checked the details and was getting read/write errors on drive D, so I copied all my shares (photos, videos, etc.) to another system on the LAN, replaced that physical drive, added and formatted a few additional drives (not the
    suspect one), reinstalled WHS and applied all the patches and updates, turned on duplication for all shared folders, configured my users, connected two clients and configured their backups, then tried to restore my backed up shares to the new server.
    I kicked off copies folder by folder, so I had about 5 separate long copy operations running from my Win7-64 client to my WinHomeServer, and left it running overnight. I have a gigabit LAN, so the bottleneck was disk speed. The client was set
    to not enter sleep/suspend/hibernate, only screensaver.
    When I woke up this morning, some were done, but three copy groups were stuck on retry/skip/cancel dialogs. Retried several times with no difference. Tried to access those folders through Explorer and they were visible. Retried a few more
    times and one continued but two gave me An unexpected network error occurred. with Error 0x8007003B. Retried and checked the box to do this for all instances, and eventually all went through and continued copying.
    I went and checked and the files that it had been stuck on were copied successfully to the server eventually, but instead of finishing the copy overnight, I still have a few hours to go.
    File sizes: one was a 2.4GB file, the others were just a 4.6MB JPG and a 25MB WMA file.

  • RELEVANCY SCORE 2.53

    DB:2.53:Did System Restore, Lost Itunes Wont Re-Install az


    Right, this one is bugging me.
    ive just got an ipod nano for my birthday (november) and have installed all my songs onto it.
    but then after a few weeks of having itunes my pc decided it didnt like its sound device, so the sound on my pc completley vanished, so we tried re-installing all the drivers, no avail.
    so, (this is on windows xp) i did a system restore to an earlier restore point (before itunes was installed!)
    and then did another one, before that date too!

    now, i dont have sound, i dont have itunes, i dont have quicktime.
    and whenever i try install any of these i get this error message

    [IMG]http://i5.photobucket.com/albums/y163/vibrating_cake/ipodprob.jpg[/IMG]

    http://i5.photobucket.com/albums/y163/vibrating_cake/ipodprob.jpg

    same for quicktime, just with quicktime in the name rather than itunes.

    this is incredibly annoying as i cant even watch dvd's on my desktop anymore because something is blocking my sound device

    so what can i do?????????

    (to summarise)

    i have windows xp
    i did two system restores BEFORE i installed ITUNES
    i cant re-install ITUNES because i get an error ITUNES.MSI is on a network device which is unavailable.
    i dont want to loose all my songs and albums because theres over 1000songs in there.
    and itunes will not open or install!

    oh... and i have tried backup on the system restore function on windows xp, wont backup BOTH system restores!

  • RELEVANCY SCORE 2.52

    DB:2.52:Bw Security And Authorization a8



    Dear Gurus,

    I need a help in making a best approach BW Security document. We are implementing BI7.0 for a client. I have to summarise the security Authorizations required for Users prospective.

    I need to summarise all which required...

    If you have any document , please help me..

    Sudha...

    DB:2.52:Bw Security And Authorization a8


    Hi

    Check these

    http://help.sap.com/saphelp_nw04s/helpdata/en/df/009441b8972e7be10000000a1550b0/content.htm

    http://help.sap.com/saphelp_nw04s/helpdata/en/66/019441b8972e7be10000000a1550b0/content.htm

    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144

    Assign points if useful

    Thanks

    N Ganesh

  • RELEVANCY SCORE 2.51

    DB:2.51:Css Link Help Please fm


    Hi all, a bit frustrated now! to summarise I have a a:link
    defined in my style sheet, but, I do not want that to be inherited
    into a sliding panel I have, so I have done what I though it is
    required but its still inheriting it, can somebody please shed any
    light on this for me?

    basically the sliding panels should NOT have the dotted line

    http://www.tranquilseas.co.uk/travelinfo.html

    many thanks in advance

    DB:2.51:Css Link Help Please fm

    thanks for the replies, ok, so this worked:

    I removed

    #maincontent a:hover {
    color: #3C6EA1;
    border-bottom-width: 1px;
    border-bottom-style: dashed;
    border-bottom-color: #3C6EA1;
    text-decoration: none;
    }

    as not needed

    and added

    a.slidernav {border-bottom-style:none;
    border-bottom-width:0px;}

    basically I was getting it the wrong way round, so I was
    doing .slidernav a but it should have been a.slidernav

    Cheers all

  • RELEVANCY SCORE 2.49

    DB:2.49:Pivot Table In Jmp ks



    Hi,

    I am using Tabulate to summarise raw categorical data table. This works well but I would like the results expressed as percentages of row totals.

    The raw table format is columns with Date, Failure Mode ("OK", "Chips", "Flakes" etc). Result should be a row for each day and a column for each failure mode, so each row contains % "OK", % "Chips", % "Flakes" for each day.

    Thanks,

    DB:2.49:Pivot Table In Jmp ks


    Thanks to everyone. Finally I made interactive tabulate work....

  • RELEVANCY SCORE 2.48

    DB:2.48:Click And Drag Not Clicking Or Dragging 3d



    Ok to summarise the answer:


    The Update function needed a capital U. The kinematic property needed to be set in the OnMouseXXXX functions and the rigidbody needed to be set to the ray.GetPoint(14) not moved by it.

    DB:2.48:Click And Drag Not Clicking Or Dragging 3d


    Here's the working code, for anyone that wants to use it. If you can make it run better or smarter, please feel free to add to it.

    var moving = false;
    var posX : float;
    var posY : float;
    var ray : Ray;

    function Update () {

    if(moving == true){
    ray = Camera.main.ScreenPointToRay (Input.mousePosition);
    //The Object is 14 away from the camera,
    Debug.Log(ray.GetPoint(14));
    //rigidbody.MovePosition(rigidbody.position + ray.GetPoint(14) * Time.deltaTime);
    transform.position.x = ray.GetPoint(14).x;
    transform.position.y = ray.GetPoint(14).y;
    transform.position.z = 1.1;
    }
    }

    function OnMouseDown () {
    moving = true;
    }

    function OnMouseUp () {
    moving = false;
    //Snap to feature
    posX = transform.position.x;
    posX = Mathf.Round(posX);
    if(posX transform.position.x){
    posX--;
    }
    posY = transform.position.y;
    posY = Mathf.Round(posY);
    if(posY transform.position.y){
    posY--;
    }
    transform.position.x = posX + .5;
    transform.position.y = posY + .5;
    }

    function OnCollisionEnter () {
    rigidbody.isKinematic = true;
    }

    function OnCollisionExit () {
    rigidbody.isKinematic = false;
    }

  • RELEVANCY SCORE 2.47

    DB:2.47:Re: Using Aggregate Function In Queries 8s


    which query? which error?----Ramin Hashimzade

    DB:2.47:Re: Using Aggregate Function In Queries 8s

    Hi,Depending on your data, you may have a Chasm Trap, which makes it impossible (or at least very messy) to do both of the aggregates at the same time. Do one of the aggregates (either the SUM or the AVG) by itself, in a sub-query, and then join that result set to the query that does the other aggregate. For example:
    SELECT t1.name
    , t1.description
    , SUM (t2.quantity) AS total_quantity
    , a3.avg_price
    FROM table1 t1
    , table2 t2
    , ( -- Begin in-line view a3, to get AVG (price) from table3
    SELECT id
    , AVG (price) AS avg_price
    FROM table3
    GROUP BY id
    ) a3 -- End in-line view a3, to get AVG (price) from table3
    WHERE t1.id = t2.id
    AND t1.id = a3.id ( + )
    GROUP BY t1.name
    , t1.description
    , a3.avg_price
    ;
    I don't have Oracle 8, and you didn't post any sample data, so I can't test this, but it doesn't use any features that weren't in Oracle 8.1.

  • RELEVANCY SCORE 2.47

    DB:2.47:Error When Executing Function In Mss Launchpad Report ??? xd



    In MSS lanchpad report, we have the following problem:

    Error in Manager Sef-Service
    When calling the report, the following error occurred:
    System: HRP
    Error when executing function

    DB:2.47:Error When Executing Function In Mss Launchpad Report ??? xd


    There are four things to check:

    - Check if report is running fine in the back-end

    - Check if the MSS selection screen displaying good in front-end

    - Check if MSS is connected to the report / query in the back-end.

    - You can also check if the Java version of portal is compatible with the patch of SAP

    The report PWPC_RPT_START_REPORT_TEST allows you to simulate the function code in the back-end.

  • RELEVANCY SCORE 2.47

    DB:2.47:Cuic Reporting Help. pm



    Hi

    We are trying to write a report in CUIC based on the Agent Team Historical All Definition that when run doesn't bring back each interval of call data for each agent.

    i.e. We'd like the report to show a daily total without each interval of the day

    We have some reports uploaded from the CISCO developer site called:

    Agent Team Historical Daily

    Agent Team Historical Weekly

    Agent Team Historical Monthly

    that I assume are supposed to do just that, summarise daily weekly and monthyl but these reports dont; seem to work

    Any help on how to summarise Daily Weekly or MOnthly, or the get the above reports working if you have also downloded them woudl be much appreciated

    Thanks

    Stuart

    DB:2.47:Cuic Reporting Help. pm


    I haven't fully reviewed the process you have followed - but the first thing that came to mind is to run an SQL query on the tables and validate that the data you are looking for is in the tables.

    Can you execute the SQL and get results? If the query comes back empty, it may not be an issue with the reports.

  • RELEVANCY SCORE 2.46

    DB:2.46:Detach In Charts 91



    Hi all

    I am trying to detach a bar chart by using the expression below but it doesnt seem to work.

    Num(If([Numerator Flag] = 1 And [Summarise Flag] = 0 , Avg({1}Numerator),

    If([Numerator Flag] = 1 And [Summarise Flag] = 1, Sum({1}Numerator),

    If([Numerator Flag] = 0 And [Summarise Flag] = 0, (Avg({1}Numerator)/Avg({1}Denominator)),

    If([Numerator Flag] = 0 And [Summarise Flag] = 1, (Sum({1}Numerator)/Sum({1}Denominator)))))),[Format Code])

    DB:2.46:Detach In Charts 91


    Incorrect Syantax. 'No Data to display'

  • RELEVANCY SCORE 2.46

    DB:2.46:Function 'Function Name' May Not Used In Sql 1j


    Hi Guys,

    How to call a function in a form level trigger?

    i created a function in program unit.In timer expired trigger i tried to call a function as
    select sf1('a') from dual;Im getting below error
    function sf1 may not use in sqlAdvance thanks

    DB:2.46:Function 'Function Name' May Not Used In Sql 1j

    You can also do it like

    Declare
    val varchar2(20)
    begin
    select sf1('a')
    into :val from dual;
    end;

  • RELEVANCY SCORE 2.46

    DB:2.46:Re: Error While Accessing Seesion Bean From Java Client, Is The Lookup Ok? mk


    Hi,
    This error usually shoots up due to the incompatibility with the dependecies. Can you please summarise how you went on compiling the application. Meanwhile, I'm trying to simulate same scenario with the GreeterEJB and the Converter examples.

    Regards
    Raj

    DB:2.46:Re: Error While Accessing Seesion Bean From Java Client, Is The Lookup Ok? mk

    I got the following error..
    Exception in thread "main" java.lang.VerifyError: (class: com/sun/enterprise/iio
    p/POAEJBORB, method: addCSIv2Component signature: (Lcom/sun/corba/ee/internal/co
    re/IOR;[B)Lcom/sun/corba/ee/internal/core/IOR;) Incompatible object argument for
    function call
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:199)
    at org.omg.CORBA.ORB.create_impl(ORB.java:303)
    at org.omg.CORBA.ORB.init(ORB.java:352)
    at com.sun.enterprise.util.ORBManager.createORB(ORBManager.java:140)
    at com.sun.enterprise.util.ORBManager.init(ORBManager.java:69)
    at com.sun.enterprise.naming.java.javaURLContextFactory.getObjectInstanc
    e(javaURLContextFactory.java:27)
    at javax.naming.spi.NamingManager.getURLObject(NamingManager.java:594)
    at javax.naming.spi.NamingManager.getURLContext(NamingManager.java:543)
    at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.jav
    a:282)
    at javax.naming.InitialContext.lookup(InitialContext.java:357)
    at samples.helloworld.ejb.Client.main(Client.java:32)

    the program is:
    env.put("java.naming.factory.initial",
    "com.sun.jndi.cosnaming.CNCtxFactory");
    env.put("java.naming.provider.url", "iiop://" + host + ":"+port);
    System.out.println("after setting properties.");

    Context initial = new InitialContext(env);
    System.out.println("before setting initial context.");
    Object objref = initial.lookup("GreeterEJB");
    System.out.println("after lookup.");
    //END OF ADDITIONS FOR IAS

    //Context initial = new InitialContext();
    //Object objref = initial.lookup("GreeterEJB");

    System.out.println("before home");
    GreeterHome home = (GreeterHome)PortableRemoteObject.narrow(objref,
    GreeterHome.class);

    System.out.println("before create");
    Greeter remote = home.create();
    String msg = remote.getGreeting();

  • RELEVANCY SCORE 2.46

    DB:2.46:Sharepoint 2010 Calendar Daily Summary Email.. 17


    Hi,
    We want a daily summary email of all the events on the calendar for that day,the alerting available in sharepoint 2010 is only for changes. In brief this job should
    iterate thru all events on the calendar for that day, summarise on only some columns for each event and then send a single consolidated email.

    Avi

  • RELEVANCY SCORE 2.46

    DB:2.46:Responsibilities sf


    I need some tips on how to analyze what a user in Payables / Receievables can do if they were given a particular responsibility. Rather than log in and physically naviagate round forms, I wondered if there is a quick way to review all our reposnibilities. Is the function the best place to look? I.e. the function is what allows the user to do what? Is there anywhere that describes what each Oracle EBS function does? and how can I see which function is attached to which particular responsibility?

    I am hoping to summarise a report on all our responsibilities something like:

    With responsibility x, the user can do action a, b, c
    With responsibility y, the user can do action d, e, f

    Any pointers much appreciated.

    DB:2.46:Responsibilities sf

    Hi,

    Both FND_FORM_FUNCTIONS_VL and FND_FORM_FUNCTIONS_TL have description columns.

    Regards,
    Hussein

  • RELEVANCY SCORE 2.46

    DB:2.46:Quicktime.Msi Error Installing 7.2.0.240 9a


    iTunes has stopped working and reports quicktime as not working. It suggests resinstalling.

    Installing iTunes + Quicktime or standalone realtime prodcues the error - "the feature you are trying t us is on a network resources that is unavailable" and has a box called "Use source..." for defining where this file exists. The .msi file lives in the path specified by default. Clickig OK produces the message "The file 'C:\Program File\Apple Software Update\Packages\Quicktime.msi' is not a valid installation package for the product Quicktime. Try to find the insatllation package 'Quicktime.msi' in a folder from which you can install Quicktime"

    There is no change if I browse to the direct from the dialog and select the file.

    I have tried uninstalling the current version of Quick Time from "Control Panel Add/Remove Programs" but this produces the same error. Selecting change in this dialogue also produces the same error.

    Selecting "Uninstall Quicktime" from Start Programes Qicktime produces the error - uninstall only valid for insatlled products.

    To summarise I can neither install or uninstall Quicktime and this is additionally screwing up iTunes.

    The current installationof Quicktime is 7.1.5.120

    HELP!

    DB:2.46:Quicktime.Msi Error Installing 7.2.0.240 9a

    I had the same problems. Apparently it occurs when wrongly uninstalling itunes.

    i fixed the problem by using the Windows Installer Cleanup Utility:

    http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

    hope this helps.

  • RELEVANCY SCORE 2.46

    DB:2.46:Error 6 In Function Module Rss_Program_Generate m9



    HI,

    wen using rsa3 facing problem

    Error 6 in function module RSS_PROGRAM_GENERATE

    Thnx regards

    DB:2.46:Error 6 In Function Module Rss_Program_Generate m9


    Hi Nishu,

    Checkout the below links

    Error 6 in function module RSS_PROGRAM_GENERATE

    error Error 6 in function module RSS_PROGRAM_GENERATE

    Regards,

    Sajeed

  • RELEVANCY SCORE 2.46

    DB:2.46:Good Router With Qos For Bt Broadband cx


    Hello, long story short, I'm going to summarise -

    Live in a house with 4 others

    They are heavy Torrenters / Limewire'ers

    I'm getting about 0.8mbs instead of 7.6.

    I need a router that can prioritize the bandwidth to my PC and Laptop.

    Something like what this can do would be WONDERFUL:

    DB:2.46:Good Router With Qos For Bt Broadband cx

    Hello, long story short, I'm going to summarise -

    Live in a house with 4 others

    They are heavy Torrenters / Limewire'ers

    I'm getting about 0.8mbs instead of 7.6.

    I need a router that can prioritize the bandwidth to my PC and Laptop.

    Something like what this can do would be WONDERFUL:

  • RELEVANCY SCORE 2.46

    DB:2.46:Urgent: Ajax Url Gateway And Hosted Mode Issues as


    Hi We have a ajax request(via Jquery) being posted to a remote server to load a dropdown. Also we need to keep the hosted mode checked in the webservices. but when the response comes back it contains the whole page source along with data. This is a customised search text box in header portlet and AJAX is for autocomplete.
    If we only gateway the request via PTportlet Java script framework and then use this gatewayed URL instead of gatewaying in webservices to call we are getting the security issue warning in mozilla's error console stating that content from repote server could not be loaded.

    So to summarise we need to gateway the ajax URL in webservice and also use hosted mode as we need the response back to be loaded in with portal header and banner on the sumbit of the form but same time we need to get rid of the junk data coming in the ajax call along with the reduired data.

    DB:2.46:Urgent: Ajax Url Gateway And Hosted Mode Issues as

    Ensure that the hosted mode is off in both the webservices and the tag. For me I have turned hosted mode off in services.

  • RELEVANCY SCORE 2.46

    DB:2.46:Query To Summarise Numbers Of Users In Each Group k1


    Hi.I'm looking for a DQL that will summarise the numbers of users in each group. This does it for one group:select count(*) from dm_user where user_name in (select users_names from dm_group where group_name = 'group1')But what I would like to see in the output is:group1 25 25
    group2 104 104
    group3 19 52
    Where column 2 is number of users explicitly defined, i.e. users_names (as in query above), and column 3 is number of users taking into account groups within groups, i.e. i_all_users_names.So, group1 and group2 have no sub-groups (or they're empty) but, from the difference in counts for group3, it has at least one sub-group.Thanks very any help.Martin

    DB:2.46:Query To Summarise Numbers Of Users In Each Group k1

    Thanks, Raju. Just what I needed. I was then able to combine your queries into one:SELECT group_name, count(DISTINCT users_names) AS Users, count(DISTINCT i_all_users_names) AS AllUsers, count(DISTINCT groups_names) AS Groups FROM dm_groupGROUP BY group_nameORDER BY group_namecheers,Martin

  • RELEVANCY SCORE 2.46

    DB:2.46:Finally Can See The Channels... But Still No Bt Sp... s8



    So...I've now had infinity for two weeks with a youview box with BT vision built in.

    To start with I could only see channel 57 (BT Sport Promo) with no other BT Sport channels, but after a coupleof updates (taking a week of checking) I can now see BT Sport 1,2 and ESPN... But now I cannot set the channels up, so time to get in touch with BT.

    Three hours++ on the phone/chat sessions yesterday (22/08) with 360deg conversations starting with the tech team, through subscriptions, through cust care to tech team to subscriptions etc etc. with still no clear advice other than its another departments issue, I am patient with call centres so allowed this to happen.

    I have trawled the forum, and tried some of the fixes but to no avail.

    To summarise...

    I have infinity

    I have a BT Sport Subscription (for App and online, and some inform me TV too!)

    All On demand players function correctly indicating full connection

    I can see the BT Sport channels

    I cannot set up the channels

    I cannot bear another phone call/chat session

    Hope someone can assist me... thx!

    Otherwise, what is the best form of escalation?







    Solved!
    Go to Solution.

    DB:2.46:Finally Can See The Channels... But Still No Bt Sp... s8


    Hello Steve_M and Paddy,

    You've weaved your magic and its now all on...BT Sport 12 and ESPN all working

    Many thanks for your help...

    I'm assuming my subscription was to fault, although Cust Care and Sales all said it was set up!...

    Again, thx for your help...

    Just a shame we can't get to you guys sooner!...

  • RELEVANCY SCORE 2.46

    DB:2.46:Export To Excel 8c


    Hi All,

    I am exporting a chart section form Hyperion Ver 8.5 using the following export code.

    ChartSection.ExportToStream(Filename + ".xls", bqExportFormatOfficeMHTML, true, true, false);

    And getting the attached xls as output - If you see in the attached XLS you will see two tabs (one with data and one with chart).
    This xls is generated using the above code.

    Now if someone open the same file from Hyperion Ver9.3 they are getting only data while exporting (no chart tab) with the same code.
    Can anyone give me equivalent code to export in version 9.3

    Just to summarise I want a export function in 9.3 which export both data and chart in one xls file in two different tabs.

    Regards
    Ujjawal

    Edited by: ujjawal_friend@yahoo.co.in on May 11, 2009 10:04 PM

    DB:2.46:Export To Excel 8c

    Hi All,

    I am exporting a chart section form Hyperion Ver 8.5 using the following export code.

    ChartSection.ExportToStream(Filename + ".xls", bqExportFormatOfficeMHTML, true, true, false);

    And getting the attached xls as output - If you see in the attached XLS you will see two tabs (one with data and one with chart).
    This xls is generated using the above code.

    Now if someone open the same file from Hyperion Ver9.3 they are getting only data while exporting (no chart tab) with the same code.
    Can anyone give me equivalent code to export in version 9.3

    Just to summarise I want a export function in 9.3 which export both data and chart in one xls file in two different tabs.

    Regards
    Ujjawal

    Edited by: ujjawal_friend@yahoo.co.in on May 11, 2009 10:04 PM

  • RELEVANCY SCORE 2.46

    DB:2.46:Eigrp Summarizing pp



    hi

    Can anyone tell me, if I want to summarise on my interface for eigrp, if say router A has learnt from router B 20 routes, if on router A I have another interface to another network, would I summarize on this interface the 20 routes in the routing table learnt from another router ?

    DB:2.46:Eigrp Summarizing pp


    Hi Carl

    You can disable auto summarization (no auto-summary) and enable summary-address command on the interface, to summarize the route out that interface:

    interface serial 0

    ip summary-address eigrp 100 192.168.0.0 255.255.0.0

    router eigrp 100

    no auto-summary

    Try this and let us know if it works..

    All the best

    Raj

  • RELEVANCY SCORE 2.46

    DB:2.46:Newbie Question Re Temporary Tables 8m


    Hi,

    I'm trying to do a comparison between 2 tables but since the realtionship between them is a many -- many I need to summarise the data from each before doing the comparison

    I've done this before in SQL server by using temporary tables as in

    SELECT Order_Number,count(*)
    INTO #temporders
    FROM orderlines
    GROUP BY Order_Number

    Is such a facility available within SQL Developer?

    Many thanks

    Steve

    DB:2.46:Newbie Question Re Temporary Tables 8m

    Another alternative, and one I would consider using in SQL Server instead of temporary tables would be something like:

    SELECT order_number, count(lines) lines, count(other) other
    FROM (SELECT Order_Number, 1 lines, to_number(null) other
    FROM orderlines
    union all
    SELECT Order_Number, null, 1
    FROM other_table)
    GROUP BY Order_NumberJohn

  • RELEVANCY SCORE 2.46

    DB:2.46:E-Mail Policy Reapplied Every 1-2 Minutes - Error 31506 Microsoft Forefront Tmg Control ks


    Dear Microsoft,
    Have you any update concerning when you expect to resolve this long-outstanding bug? Until a fix is available, your customers cannot subscribeany Exchange Edgeservers when they are integrated with Forefront TMG andForefront Protection
    for Exchange.
    To summarise: TMG integration prevents any changes being made directly to Exchange Edge Server using the Exchange MMC. Any attempted changes are reversedand the configuration realplied by TMG. Thisbehavious is by-design and
    is generally a good idea as it keeps the TMG/Exchange configuration in sync. However, whenanEdge Server is subscribed,the subscription information written by the Hub servers causes the TMG to use this same mechanism.Hence,
    the E-Mail policy is continually reapplied andthe alerts triggered.
    Looking forward to hearing from you.
    Ian Currie

    IanC

    DB:2.46:E-Mail Policy Reapplied Every 1-2 Minutes - Error 31506 Microsoft Forefront Tmg Control ks

    Hi Nick,
    Thanks for responding.
    I'm afraid this thread doesn't include a solution to the problem. What I need to know is: when will Microsoft fix this bug?
    Regards,
    Ian

    IanC

  • RELEVANCY SCORE 2.46

    DB:2.46:Home V1.10 Bug Summary - Commerce 1d


    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

    DB:2.46:Home V1.10 Bug Summary - Commerce 1d

    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

  • RELEVANCY SCORE 2.46

    DB:2.46:Pre-Requisite Query Schedule Task Location. 8k



    Currently hoping to use pre-requisite queries in order to prevent Windows XP packages being installed on Windows 7 machines. In order to achieve this we have created a public pre-requisite query which will exclude non-XP machines. Within a test environment this works fine. However, when placing the scheduled tasks in a 'team area' the result of running the tasks is returned as "Device failed the pre-requisite query." If the scheduled task is then placed within 'My Scheduled tasks' the pre-requisite query functions as intended. (We have found that pre-requisite queries must remain public.)

    The creator of the query is also the creator of the package and scheduled task and is also a member of the team area that the scheduled task was placed within.

    To summarise the issue, the scheduled task only functions as intended when not placed in a team area. It will obviously function correctly if no pre-requisite query is placed on the software package.

    Has anyone else experienced this issue?

    DB:2.46:Pre-Requisite Query Schedule Task Location. 8k


    In case anyone experiences the same issue - SP3 appears to have resolved the problem.

  • RELEVANCY SCORE 2.45

    DB:2.45:Xps 710 Not Vista Compatible fp


    Hi,

    Can someone summarise what the present situation is with installing Vista x64 (released version from MSDN subscription) on a new XPS 710, 4gb RAM, 1gb Nvidia and Raid 0.

    My experience has been that Vista will NOT install and on this machine. I can get it to part function with 2gb RAM removed but this is not appropriate. Also throughput on the disk is very slow.

    Is this Dell MS or both?

    Many thanks,

    Lee.

  • RELEVANCY SCORE 2.45

    DB:2.45:Hp Photosmart C309a Series Driver Issues On Windows 7 Ultimate 64bit df



    I have repeatedly tried to resolve a problem I find with my PC and my HP 309a printer.

    The printer appears to work, but I keep seeing a yellow warning symbol on my Devices and Printers display.

    When I select the PC icon, I get driver errors reporting.

    The printer does print, and it also appears to function.

    The only part which seems ok is the "fax" driver.

    The other one shows:

    Photosmart C309a series

    Device type: Other devices

    Manufacturer: Unknown

    Location: Unknown

    The drivers for this device are not installed. (Code 28)

    There is no driver selected for the device information set or element.

    To find a driver for this device, click Update Driver.

    This driver seems to work:

    Photosmart C309a series

    Device type: Imaging devices

    Manufacturer: HP

    Location: ip:nnn:nnn:nnn:nnn,subnet:nnn.nnn.nnn.nnn/nnn (obviously I have not included the IP address.)

    This device is working properly.

    It also looks like the Fax part is working correctly, but at present I am not using the Fax.

    But the properties for the Fax element show:

    Manufacturer: Unavailable

    Model: HP Photosmart C309a series Fax

    Model number: Unavailable

    Categories: Printer

    Description: Unavailable

    I have gone to the HP website, searched for the latest driver to run on Windows 7 64bit (Ultimate). I have downloaded it successfully, and the printer prints and appears to scan successfully, following restart of the PC, I keep getting the same error.

    I have downloaded v14 full suite of HP Solutions Centre, PS_AIO_05_C309a_Net_Full_Win_enu_140_047

    I have downloaded the patch: dot4patch_reboot

    I have downloaded the scan update: CPE_SCAN_DESTINATION_UPDATE_hpcom_001_003

    I have downloaded Smart Web printing update: hp_smart_web_printing

    Whilst the printer seems to work, I still get issues with Solution Centre not working, although at the moment it is.

    So to summarise, how do I resolve the missing driver issue? I cannot find the actual driver on its own to point to when trying to run the update driver option too.

    Anyone able to help please?

    DB:2.45:Hp Photosmart C309a Series Driver Issues On Windows 7 Ultimate 64bit df


    Bob

    this was great that you provided this information.

    I have been trying to assist my sister for a couple of weeks now looking for answers as to how to fix the issue with her printer not running wirelessly.. it has no problem with usb cable printing but still unable to use it wirelessly. I unfortunately have made a grave mistale that most people will make and select the HP rather than the Hewlett Packard for the driver update. KUDOS to you for being the first to recognize this as being the wrong selection....

    Hopefully she will now be able to resolve the problem and use the printer as she intended to use it ,. wirelessly as it was working fine on her VIsta machine until it took a bath and had to buy a new laptop with windows 7 installed... has not been able to esolve the wireless issue .

    She is disabled and hte wireless portion of it is a MUST so this is grand to have found the solution and hopefully it will resolve any future issues.. thanks have a happy new year

    I think you need to post more out on the web on like yahoo answers and such and get this saturated.. so people can find this solution in any place they search..

  • RELEVANCY SCORE 2.45

    DB:2.45:Errors Lnk2019: Unresolved External Symbol jk


    Hi All,
     
    I am trying to migrate code from HP-UNIX to WINDOWS environment (VS 2005). When compiling the code, I am facing a lot of LINKER errors . LNK2019.
     
    The errors are as below. Please write in your comments about the errors/solutions.
     
    Error 278 error LNK2019: unresolved external symbol _ct_con_props@24 referenced in function _DB_AddCmd coDbGen_ct.obj
    Error 279 error LNK2019: unresolved external symbol _ct_cmd_drop@4 referenced in function _DB_SubmitQuery coDbGen_ct.obj
    Error 280 error LNK2019: unresolved external symbol _ct_cancel@12 referenced in function _DB_SubmitQuery coDbGen_ct.obj
    Error 281 error LNK2019: unresolved external symbol _ct_send@4 referenced in function _submitQuery coDbGen_ct.obj
    Error 282 error LNK2019: unresolved external symbol _times referenced in function _submitQuery coDbGen_ct.obj
    Error 283 error LNK2019: unresolved external symbol _ct_command@20 referenced in function _submitQuery coDbGen_ct.obj
    Error 284 error LNK2019: unresolved external symbol _ct_cmd_alloc@8 referenced in function _submitQuery coDbGen_ct.obj
    Error 285 error LNK2019: unresolved external symbol _sysconf referenced in function _getResults coDbGen_ct.obj
    Error 286 error LNK2019: unresolved external symbol _ct_results@8 referenced in function _getResults coDbGen_ct.obj
    Error 287 error LNK2019: unresolved external symbol _ct_res_info@20 referenced in function _getNumRows coDbGen_ct.obj
    Error 288 error LNK2019: unresolved external symbol _ct_fetch@20 referenced in function _getRowResults coDbGen_ct.obj
    Error 289 error LNK2019: unresolved external symbol _ct_bind@24 referenced in function _getRowResults coDbGen_ct.obj
    Error 290 error LNK2019: unresolved external symbol _ct_describe@12 referenced in function _getRowResults coDbGen_ct.obj
    Error 291 error LNK2019: unresolved external symbol _cs_config@24 referenced in function _coDbInit coDbGen_ct.obj
    Error 292 error LNK2019: unresolved external symbol _ct_callback@20 referenced in function _coDbInit coDbGen_ct.obj
    Error 293 error LNK2019: unresolved external symbol _ct_init@8 referenced in function _coDbInit coDbGen_ct.obj
    Error 294 error LNK2019: unresolved external symbol _cs_ctx_drop@4 referenced in function _exitHandler coDbGen_ct.obj
    Error 295 error LNK2019: unresolved external symbol _ct_exit@8 referenced in function _exitHandler coDbGen_ct.obj
    Error 296 error LNK2019: unresolved external symbol _cs_ctx_global@8 referenced in function _exitHandler coDbGen_ct.obj
    Error 297 error LNK2001: unresolved external symbol _cs_ctx_global@8 DBCmn_ct.obj
    Error 298 error LNK2019: unresolved external symbol _getpwuid referenced in function _coDbConnect coDbGen_ct.obj
    Error 299 error LNK2001: unresolved external symbol _getpwuid eh.obj
    Error 300 error LNK2019: unresolved external symbol _geteuid referenced in function _coDbConnect coDbGen_ct.obj
    Error 301 error LNK2001: unresolved external symbol _geteuid eh.obj
    Error 302 error LNK2019: unresolved external symbol _ct_connect@12 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 303 error LNK2019: unresolved external symbol _gethostname referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 304 error LNK2001: unresolved external symbol _gethostname eh.obj
    Error 305 error LNK2019: unresolved external symbol _ct_con_drop@4 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 306 error LNK2019: unresolved external symbol _ct_con_alloc@8 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 307 error LNK2019: unresolved external symbol _cs_ctx_alloc@8 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 308 error LNK2019: unresolved external symbol _ct_close@8 referenced in function _coDbDisconnect coDbGen_ct.obj
    Error 309 error LNK2019: unresolved external symbol _kill referenced in function _coProgArgParseKill coProgArg.obj
    Error 310 error LNK2019: unresolved external symbol _str_rstr referenced in function _coProgArgParsePubSubParameters coProgArg.obj
    Error 311 error LNK2019: unresolved external symbol _cs_convert@24 referenced in function _coDbConvert DBCmn_ct.obj
    Error 312 error LNK2019: unresolved external symbol __NutPathToWin32 referenced in function _EH_ReopenLogFile eh.obj
    Error 313 error LNK2019: unresolved external symbol _getlogin referenced in function _EHSetLogString eh.obj
    Error 314 fatal error LNK1120: 32 unresolved externals D:\data\197670672\My Documents\Visual Studio 2005\Projects\etrs\Debug\etrs.exe
     
    Vikas

    DB:2.45:Errors Lnk2019: Unresolved External Symbol jk

    Well....now this becomes more tricky...there is no direct equivalent of the function 'fork()' exposed through the Win32 API. Although there exists e.g. 'CreateProcess()', the behavior is still different. Off the top of my head, there is no easy way to circumvent this issue. Either way you have to change the code (or at least provide your own version of 'fork').

  • RELEVANCY SCORE 2.45

    DB:2.45:Summarisation z1



    Hi,

    can we summarise TYPE 5 LSAs in ospf..?

    Thanks in advance

    Thomas.

    DB:2.45:Summarisation z1


    Hi,

    type 5 LSA can be summarized on the ASBR

    Router(config-router)#summary-address address mask

    regards

  • RELEVANCY SCORE 2.45

    DB:2.45:Bcoee 71



    Hi - I am planning our install of BCOEE and looking at the doco under system configuration it mentions datawarehouse aging policy - we currenly keep our detailed data for six wks so I guess I would need to look at keeping our detailed data for 2 months. The hour, day and months columns are confusing me. Are these periods for summary data? Currently we use automator to summarise and we summarise using Morning,Lunch,afternoon,evening and early, and we keep about 18months of summry data so I don;t know how this would fit with the hour day month field? does anyone know? Thanks in advance Andrea

    DB:2.45:Bcoee 71


    Hi Andrea,

    Sorry, but I did not receive any mail from you - please use my corporate email giuseppe (underscore) nardiello (at) bmc (dot) com.

    Thanks,

    G

  • RELEVANCY SCORE 2.45

    DB:2.45:Re: Error Handlling In Function mm


    Thank you very much

    DB:2.45:Re: Error Handlling In Function mm

    Thanks a lot for your time and patience. It did work .

  • RELEVANCY SCORE 2.45

    DB:2.45:Ospf Summarisation 3a



    I am getting conflicting statements regarding the summarising of routes on an ASBR using the summary-address command.

    Is the summary-address command used to summarise routes internal to the OSPF domain before advertising them to the outside world, or is it used to advertise external routes before injecting them into the OSPF domain?

    thanks in advance for your help

    Daniel,

    DB:2.45:Ospf Summarisation 3a


    summary-address will summarize ONLY external routes and advertise them into

    ospf domain. This command can only be applied at ASBR

    This new summary will go as an External LSA in all of your OSPF areas.

    Hope this helps

    Zaheer

  • RELEVANCY SCORE 2.45

    DB:2.45:Need Suggestion In Displaying Data In Alv. 93



    Hi All Experts,

    I have a scepic scenario for which I need your inputs. I am preparing a report which will display data foe entries made in time sheet. The entries in time sheet can be made for anything like a change request on an incident etc. It will have various output fields

    And also dates for which entries are made. So it can have date from 1 to 31. This all is

    to be displayed in ALV. Now the report can be displayed in two Summarised ways.

    One summary can be for a user and another for the object type(incident, change request).

    Now if the user wants to see this report for a period more than a month then I have to summarise it against a month too. So am not sure how to handle this. Which type of ALV function module to be used to display this?

    Regards,

    Saket

  • RELEVANCY SCORE 2.45

    DB:2.45:Rac And Grid Computing zz


    Hi,

    I am trying to understand the connection between RAC and Grid Computing.
    In RAC, we can have multiple instance of the same physical database and if all these instances are running on n* separate machines then we have n+ set of processes to take care of computation.

    Isn't this summarise the Grid computing as well or is it something entirely different. Please share.

    Thanks in Advance

    DB:2.45:Rac And Grid Computing zz

    Hi,

    Billy already answered well.

    Litte Note:

    Timeline of Oracle Databases:

    1992: Oracle version 7 appeared with support for referential integrity, stored procedures and triggers.
    1997: Oracle Corporation released version 8, which supported object-oriented development and multimedia applications.
    1999: The release of Oracle8i aimed to provide a database inter-operating better with the Internet (the i in the name stands for "Internet"). The Oracle8i database incorporated a native Java virtual machine (Oracle JVM, aka "Aurora").
    2001: Oracle9i went into release with 400 new features, including the ability to read and write XML documents. 9i also provided an option for Oracle RAC, or "Real Application Clusters", a computer-cluster database, as a replacement for the Oracle Parallel Server (OPS) option.
    2003: Oracle Corporation released Oracle Database 10g, which supported regular expressions. (The g stands for "grid"; emphasizing a marketing thrust of presenting 10g as "grid computing ready".)
    2005: Oracle Database 10.2.0.1aka Oracle Database 10g Release 2 (10gR2)appeared.
    2007: Oracle Corporation released Oracle Database 11g for Linux and for Microsoft Windows.

    Future (*Just a guess*): Oracle Database will release version 12c. (The c stands for "cloud"; emphasizing a marketing thrust of presenting 12c as "Cloud Computing ready".)

    Oracle has released products with "C" of the "Cloud" (e.g Oracle Enterprise Manager 12c)

    http://en.wikipedia.org/wiki/Oracle_Database

    Regards,
    Levi Pereira

  • RELEVANCY SCORE 2.45

    DB:2.45:Get Sum Of Payload Values Over A Variable Length Tumbling Or Snapshot Window pk


    Hi, I need to summarise the values in my event payload when the event overlap with interval events of varying length:

    |----interval 1-----|---interval 2-------|------...
    |1| |2| |3| |4| |5| |6| |7| ...

    - I need the sum of a payload fields from 1,2 3 and 4,5, 6.
    - The length of interval 1 and interval 2 changes
    - There are 1 or more events occurring during each interval

    Tried creating a tumbling window over each interval event but cant set the length dynamically, so looked at snapshot windows but these generate windows on each change of points(1,2,3) during the interval i'm trying to summarise.
    How can I create a variable length tumbling window (this would allow me to easily summarise the points contained in the window) or alter the snapshot to capture all the events in an interval at once instead of on each change?
    Thanks in advance.

    DB:2.45:Get Sum Of Payload Values Over A Variable Length Tumbling Or Snapshot Window pk

    If I had to guess, I'd say that the snapshot window is a touch more efficient. Not because UDSO's aren't efficient - they are - but because it has, I think, fewer operators overall. You should make sure, however, that the temporal properties of the output
    events are correct with what you are looking for and trying to do.DevBiker (aka J Sawyer)
    Microsoft MVP - Sql Server (StreamInsight)

    If I answered your question, please mark as answer.
    If my post was helpful, please mark as helpful.

  • RELEVANCY SCORE 2.45

    DB:2.45:Summarise Value In Main Report Which Links To Shared Variable In Subreport dj



    I have a Main Report and a linked Sub Report with a Shared Boolean Variable. The Shared Variable is returning the correct values and I have been able to use the result in a formula calculation (@Management Fee). I am then trying to summarise the value returned in the @Management Fee formula at Group Header 1 level, and the system won't allow it due to the reset formula I have in the subreport of the shared value.

    The sub report is set up as follows:

    Details A

    @Reset VAR

    whileprintingrecords;

    shared booleanvar Deduction:=false

    Details B

    @Shared VAR

    whileprintingrecords;

    shared booleanvar Deduction;

    Deduction:={@Deduction}

    Details C

    @Deduction

    if {DeductDetail.Deduction}="Management Fee" then true

    In the main report I have the linked SubReport in Details A and the Shared Variable in Details B as follows:

    @DeductionVAR

    whileprintingrecords;

    Shared BooleanVar Deduction;

    Deduction;

    How can I summarise the value of @Management Fee and formulas using this value given the reset issue and also the fact that the other figures used in the formula are not contained within the SubReport?

    Any assistance you can provide would be appreciated.

    DB:2.45:Summarise Value In Main Report Which Links To Shared Variable In Subreport dj


    Resets are not usually in the same part of the report as the formula doing the calculating. If you do not have a group header, try putting the reset in the report header of the subreport.

  • RELEVANCY SCORE 2.45

    DB:2.45:Eigrp Manual Summarization 8x



    If you have an existing connection that is manually summarising a network block as 10.90.0.0/18 subnet, is it possible to use one of the subnets within that block for another remote site even though it is being advertised in the summary route or would it be easier to not summarise and increase the size if the routing table?


    DB:2.45:Eigrp Manual Summarization 8x


    Hi,

    This is neither optimul routing design, nor recommended setup.

    However, its possible, the impact would be the longest prefix will always be preferred over the summarized route. Another impact would be if this Network (most specific route) always reachable, No traffic destined for the Network part of the summarized route is going to reach its destination due to the longest match preference.

    Could you provide more details about the reason of having 2 Networks spilitted at different sites. I mean why you had to?

    HTH

    Mohamed

  • RELEVANCY SCORE 2.45

    DB:2.45:Re: Condition ????? pj


    in Function Returning Error Text

    DB:2.45:Re: Condition ????? pj

    Hi Jure

    In the front end iam having twon fields one is character field and the other is numeric field.

    The character field has 15 max length. If i typed more than 15 character i dont want the cursor to proceed to next field and it should through the error message with field length is fixed to 15.

    The another field is numeric it should not allow character and before going to next filed the error should through this is numeric field and the cursor should be in the same field.

    can you please give me the code for this. Iam new to this application.

    with regards
    Ravi

  • RELEVANCY SCORE 2.45

    DB:2.45:Hdinsight Interactive Javascript Ls Throwing Error md


    Hi,
    I'm trying to use the Interactive JavaScript to list the files in a folder but it throws something that looks like an error.
    When I use commands with the # hash it outputs the following instead of what I want it to do. For example, at the js command line I put in #ls and it outputs
    {
    0: {
    readyState: 4
    setRequestHeader: [object Function]
    getAllResponseHeaders: [object Function]
    getResponseHeader: [object Function]
    overrideMimeType: [object Function]
    abort: [object Function]
    done: [object Function]
    fail: [object Function]
    progress: [object Function]
    state: [object Function]
    isResolved: [object Function]
    isRejected: [object Function]
    then: [object Function]
    always: [object Function]
    pipe: [object Function]
    promise: [object Function]
    success: [object Function]
    error: [object Function]
    complete: [object Function]
    statusCode: [object Function]
    responseText:
    status: 12017
    statusText: error
    }
    1: error
    2:
    }

    I have HDInsight installed on a Windows 2008 R2 machine.
    Any ideas?

    Thank you for your help!

    g

    DB:2.45:Hdinsight Interactive Javascript Ls Throwing Error md

    OK, I lied, because it just did it again and my previous suggestion wasn't enough this time. I even restarted Apache Hadoop isotopejs service and that didn't help either. What I then tried was open the site in Chrome (interactive JavaScript commands worked
    there) and then immediately went back ovber into IE and they magically are working there again too.
    In other words, I have no idea what's going on.

  • RELEVANCY SCORE 2.45

    DB:2.45:Database Related Files Are Missing. xj


    We are able to compile the program, but the program cannot reference some of the sybase related definitions( which are available in ctlib and cslib of sybase source files mentioned below), due to this we are getting the below linker errors.
     
    Do we need to use the different ct/cs libraries for Windows to connect into the sybase running on Solaris system?
    Is the source/libraries are available to download for Windows?
     
    Could somebody give some inputs on this.
     
    ctcancel.c
    ctcmd.c
    ctresult.c
    ctrinfo.c
    ctdesc.c
    ctbind.c
    ctfetch.c
    csconfig.c
    ctcallbk.c
    ctinit.c
    ctexit.c
    csctxdrp.c
    csctxglb.c
    ctcon.c
    cscnvrt.c
     
     
    Linker Errors are below:
    Error 278 error LNK2019: unresolved external symbol _ct_con_props@24 referenced in function _DB_AddCmd coDbGen_ct.obj
    Error 279 error LNK2019: unresolved external symbol _ct_cmd_drop@4 referenced in function _DB_SubmitQuery coDbGen_ct.obj
    Error 280 error LNK2019: unresolved external symbol _ct_cancel@12 referenced in function _DB_SubmitQuery coDbGen_ct.obj
    Error 281 error LNK2019: unresolved external symbol _ct_send@4 referenced in function _submitQuery coDbGen_ct.obj
    Error 283 error LNK2019: unresolved external symbol _ct_command@20 referenced in function _submitQuery coDbGen_ct.obj
    Error 284 error LNK2019: unresolved external symbol _ct_cmd_alloc@8 referenced in function _submitQuery coDbGen_ct.obj
    Error 286 error LNK2019: unresolved external symbol _ct_results@8 referenced in function _getResults coDbGen_ct.obj
    Error 287 error LNK2019: unresolved external symbol _ct_res_info@20 referenced in function _getNumRows coDbGen_ct.obj
    Error 288 error LNK2019: unresolved external symbol _ct_fetch@20 referenced in function _getRowResults coDbGen_ct.obj
    Error 289 error LNK2019: unresolved external symbol _ct_bind@24 referenced in function _getRowResults coDbGen_ct.obj
    Error 290 error LNK2019: unresolved external symbol _ct_describe@12 referenced in function _getRowResults coDbGen_ct.obj
    Error 291 error LNK2019: unresolved external symbol _cs_config@24 referenced in function _coDbInit coDbGen_ct.obj
    Error 292 error LNK2019: unresolved external symbol _ct_callback@20 referenced in function _coDbInit coDbGen_ct.obj
    Error 293 error LNK2019: unresolved external symbol _ct_init@8 referenced in function _coDbInit coDbGen_ct.obj
    Error 294 error LNK2019: unresolved external symbol _cs_ctx_drop@4 referenced in function _exitHandler coDbGen_ct.obj
    Error 295 error LNK2019: unresolved external symbol _ct_exit@8 referenced in function _exitHandler coDbGen_ct.obj
    Error 296 error LNK2019: unresolved external symbol _cs_ctx_global@8 referenced in function _exitHandler coDbGen_ct.obj
    Error 297 error LNK2001: unresolved external symbol _cs_ctx_global@8 DBCmn_ct.obj
    Error 302 error LNK2019: unresolved external symbol _ct_connect@12 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 305 error LNK2019: unresolved external symbol _ct_con_drop@4 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 306 error LNK2019: unresolved external symbol _ct_con_alloc@8 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 307 error LNK2019: unresolved external symbol _cs_ctx_alloc@8 referenced in function _coDbConnect_P coDbGen_ct.obj
    Error 308 error LNK2019: unresolved external symbol _ct_close@8 referenced in function _coDbDisconnect coDbGen_ct.obj
    Error 311 error LNK2019: unresolved external symbol _cs_convert@24 referenced in function _coDbConvert DBCmn_ct.obj
     
     

    DB:2.45:Database Related Files Are Missing. xj

    Why not try the Sybase community newsgroups?
     
    http://www.sybase.com/detail?id=47613
     
    Brian
     
     

  • RELEVANCY SCORE 2.45

    DB:2.45:Cucm 10 Axl Function Listuser Error 9d



    Hi,

    In normal situation, "LUser"

    DB:2.45:Cucm 10 Axl Function Listuser Error 9d


    Sorry for my clicking error. Please refer to the following thread:

    CUCM 10 Incorrect Response from function "listUser"

  • RELEVANCY SCORE 2.44

    DB:2.44:Manual Eigrp Summarisation (Where To Do It) zd


    ------rtr7-----------rtr10----------rtr4----------

    The line off rtr7 is an ethernet network of 172.16.5.0/29

    Between rtr7 and rtr10 is a /24 WAN link and runs EIGRP.

    Between rtr10 and rtr4 is an ethernet network /24 running RIPv1

    rtr10 redists EIGRP into RIPv1. (all networks are /24 except the /29 off rtr7)

    So, i know that I have to manually summarise the /29 into a /24 so that RIPv1 will accpet the route.

    Question is, where is best to do it. Assume no other 172.16.5.0 networks in the routing table.

    The logical place to do this is off the rtr7 WAN line to rtr10 with the command "ip summary-address eigrp 65001 172.16.5.0 255.255.255.0"

    but, i could also just summarise this on the ethernet from rtr10 to rtr4 on even the WAN link off rtr10 back to rtr7. I could even create a loopback interface with no ip address on rtr10 and put the summarisation on this interface.

    If i summarise on a loopback with no ip address on rtr10, i dont send a summary route back to rtr7 and it just creates the null0 route on rtr10 and summarised a /24 for the RIPv1 redistribution.

    Surely, this is neater for the routing table, to hap on a redistribution router a loopback doing all the summarsation?

    HELP :)))))))))))))))))))))

    DB:2.44:Manual Eigrp Summarisation (Where To Do It) zd


    Any of the above options would work, but I'd probably summarize at the EIGRP/RIPv1 border, on the outbound interface towards RTR4 on RTR10. My reasoning would be that it doesn't make any sense to take routing information out of eigrp before it is pushed into RIP, since you might have other /29's added later that will need to be routed to, and could cause yourself problems if you summarize at the RTR7/RTR10 interface.

    Russ.W

  • RELEVANCY SCORE 2.44

    DB:2.44:Eigrp Auto Summmary Query dd



    I have the following network:

    All routers are configured in EIGRP AS 1 and the network 172.16.0.0 command (and the network 10.0.0.0 command for R1 and R4). All except for Router 1 have been configured with no auto. Router 1 has been left as the default of auto summarisation. The link between R2 and R3 is down.

    My question is as follows:

    What will R1 advertise to  R3 about 172.16.4.0/24 and why?

    It will summarise at the classful boundary... meaning that it will send 172.16.0.0 to Router 4. However what will it send to R3?

    After running this in GNS3 I find that R3 has 172.16.4.0/24 in its routing table. But why? Does it realise that the link to R3 is in the same classful network and not summarise?

  • RELEVANCY SCORE 2.43

    DB:2.43:Complaints And Leaving Vodafone 3p


    So I'm having a seemly common nightmare with Vodafone.Firstly, my iPhone 6 cannot and has not been able to receive calls routinely since I started my contract in November- a pretty basic function on a phone! I've called customer services 6 times now and spent over 5 hours in the phone with them, plus been to a Vodafone store about this. To summarise this experience, they have all been nice people but nobody has done ANYTHING to resolve this problem. In fact, I've been lied to twice now about getting compensation and that some one will call me (or email me because of the issue) and keep me updated about what they're doing to help.Utter rubbish and really frustrating.Does anyone know what I can do about this? I'm pretty much at the point of handing my phone back to them and cancelling my direct debit on the basis that they're not upholding their side of the contract, any advice?

    DB:2.43:Complaints And Leaving Vodafone 3p

    If you do opt to visit an  store then please do make a Genius Bar Appointment as you could be turned away if their busy.The official  link is https://www.apple.com/uk/retail/geniusbar/I appreciate your frustrated but please don't be tempted to cancel your Direct Debit as this could cause issues and in the extreme affect a Credit Rating.Would you let us know how you get on please.




    iPhone 6 Plus.

  • RELEVANCY SCORE 2.43

    DB:2.43:Home V1.10 Bug Summary - Network Errors fs


    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

    DB:2.43:Home V1.10 Bug Summary - Network Errors fs

    Summarise the bugs in this category here. Please don't reply to this thread unless you are part of the team managing the category. If you aren't sure then don't post.

  • RELEVANCY SCORE 2.43

    DB:2.43:Could Not Connect To Windows Azure Using Provide Subscription Id And Certification cd



    Hi
    I have create a very simple application with LS and trying to deploy it to the Windows Azure.
    I am pretty confident that all the instructutions have been followed in the guide show on the LS Develper web page, however, I get the error message, Could not connect to Windows Azure using provide Subscription ID and certification.
    To summarise,
    1) I have checked the Subscription ID several times.
    2) The certification has been added in the Window Azure Portal using the Copy Path button. The certificate is also showing up in the drop down.
    3) The certification is showing up as being created under my Windows Azure portal
    Any ideas what could be the reason for the connectivity failure?

    DB:2.43:Could Not Connect To Windows Azure Using Provide Subscription Id And Certification cd


    Hi
    I have create a very simple application with LS and trying to deploy it to the Windows Azure.
    I am pretty confident that all the instructutions have been followed in the guide show on the LS Develper web page, however, I get the error message, Could not connect to Windows Azure using provide Subscription ID and certification.
    To summarise,
    1) I have checked the Subscription ID several times.
    2) The certification has been added in the Window Azure Portal using the Copy Path button. The certificate is also showing up in the drop down.
    3) The certification is showing up as being created under my Windows Azure portal
    Any ideas what could be the reason for the connectivity failure?

  • RELEVANCY SCORE 2.43

    DB:2.43:Using Mbapi To Calculate Proration d9





    hi,
    I have successfully used the MBAPI function ProcessOrder() to submit a sale into cbm / modernbill. This will create the client, add the Products as packages and add relevant contacts.

    What i would like to do is summarise an order with consideration given to proration. does cbm / modernbill expose any functions to calculate Proration based upon ProcessOrder() or ProcessCheckout() ?

    Thanks
    Paul

    DB:2.43:Using Mbapi To Calculate Proration d9




    Dmitry,

    ok i think im getting the idea.

    the panel version is 11.04 i think - the data has come from a 6.03 modernbill installation.

    so i could call ProcessCheckout() with disableCharging and disableInvoicing set to 1.
    then GetInvoice() to get the generated invoice and display the charge summary from this as it would include proration
    then call ProcessInvoice() to charge.

    very useful - thanks

    thanks
    Paul

  • RELEVANCY SCORE 2.43

    DB:2.43:Csol Query In Quality Gate Management mz



    Hello,

    We're currently using SAP 7.1 SP3 and are using Quality Gate Management

    to manage our transports.

    Here's a description of our current scenario.

    We have three QGM projects - P1, P2 and P3.All three projects are of type "Implementation".Our Cross System Object Lock configuration is as follows3.1 If transport 1 in P1 locks an object that is to be used in transport
    2 in P2 then the system should show an error.
    3.2 If transport 1 in P1 locks an object that is to used in transport 3
    in P1 then the system should show a warning.
    To summarise, transports in the same project locking objects are shown
    as warning. Whereas transports between two different projects are shown

    as errors.

    Our Requirement:

    We want the system to show warning if the transports that are spread

    across projects belong to the same type - e.g. Implementation for P1 and

    Implementation for P2. But transports that are spread across project

    belonging to different type - e.g. Implementation for P1 and

    Maintenance for P3 the system should show an error.

    Is this possible? If yes, could you please explain how this is done.

    Please find attached the screen shot of our current CSOL config in our system.

    DB:2.43:Csol Query In Quality Gate Management mz


    hi,

    Yes, this is posible. just make the customizing only which you want to prompt error, rest of the conflicts system by default displays the warning.

    Since you are using implementation prject,

    Select the change relation type only as "Overlapping"

    P1 objects used in P2 you want to trigger error. then select project relation as "Cross" and the object type selection depends on you, if you select cross client only repository object considered to analyse, so I suggest you to choose "Client specific"

    there are other sceraios listed here

    Conflict Analysis Scenarios - SAP Documentation

    Please check and update

    Thanks

    Jansi

  • RELEVANCY SCORE 2.43

    DB:2.43:Problem With Motion Recording And Errors In Log 1k



    Hi, I have 1 aircam dome witch recently updated to UV 3.0.8 and cam firmware 3.0.9.25. Im not connecting the problem directly to the update, but nowI nottice new bugs:

    The cam is placed at the main entrance of a residential building with large in/out traffic. The camera is placed 6 months ago and it was working propterly (as far as I can tell).WhatI noticed, the cam not recording all motions - for example, yesterday it didn't recorded half a day events - the sensor is set to maximum, in the entire visible area of the lens. Another bug, the duration of the particular motion event is normaly 2-3 mins (now they are ~5:00 mins average), after I restarted the camera (immediately after I selected restart),in "recent recordings" hundreds of new events showed up. I checked and all the videos were with broken timing - something like 720.40, and not working. In the mean time there is error log witchI cannot understand - Im posting all logs. Last thing, every time in the recent days, when I check there is always "in progress" motion recording.

    So, lets summarise, main problem is not all events are recorded, additionaly the is some problem with the recoded ones. Will be gratefull for any help and advice.










    Attachments:







    logs.zip ‏158 KB

    DB:2.43:Problem With Motion Recording And Errors In Log 1k


    Ok, thanks will look at that tread. In the meantime if anyone come up with something is free to share it here

    Little update:

    If I din't mentioned it. When I reboot the camera trough the UV ui, as soon as I do it, there is a red popup on the bottom for recent recording come up. And depending on how quickly I restart the camera after hanging up, the "recent" videos could be tousands... Every one of them with the same broken duration time code - last time it was 3636:26 - probably thats the total duration of all missing recording. And if I try to plays some of them, they are not responsive.

  • RELEVANCY SCORE 2.43

    DB:2.43:Discoverer - Issue With Summary Object 89


    Hi,
    When I use Oracle Discoverer Administrator for mapping external table (rather view) created manualy for SALES area. I have 9 dimension in view after mapping in a list showing below summarise object I have only 7related object not all with was mapped. How I can solve this issue. What is wrong?
    I work on Discoverer 10.1.2.1.

    Regards,
    Lukasz

    DB:2.43:Discoverer - Issue With Summary Object 89

    Hi,
    When I use Oracle Discoverer Administrator for mapping external table (rather view) created manualy for SALES area. I have 9 dimension in view after mapping in a list showing below summarise object I have only 7related object not all with was mapped. How I can solve this issue. What is wrong?
    I work on Discoverer 10.1.2.1.

    Regards,
    Lukasz

  • RELEVANCY SCORE 2.43

    DB:2.43:Printing A Pdf File 7s


    Hi there everyone, just got my surface not long ago and getting used to it and learning how to do things. I need to print out an application form which is in a PDF format but to my surprise there doesn't seem to be a print function. Am I looking in the wrong
    place or is it really impossible to print these from the Surface ? If that is the case then I hope an update will be released because it's really silly. I'm glad that it seems to be possible to print at least from Word.

    So to summarise, I suppose the question would be - Is it possible to print a PDF file from the Surface ? by the way I have a WiFi network printer which I can see is recognised by Surface

    DB:2.43:Printing A Pdf File 7s

    My printer was already in devices, I didn't need to do anything. Worked perfectly when followed steps from Kate, thank you very much !! :)

  • RELEVANCY SCORE 2.43

    DB:2.43:Iphone 4 "Bricked" With Broken Power Button. kz


    Hello sorry If this is already posted here, but I've been trying to sort this for hours and my brain is in a bad way, along with my phone lol.Around a month ago I dropped it and cracked the screen, then a few days later the power button jammed. (don't know if it was related as it worked for a few days after the drop, but probably is). Anyway not having a power button didn't really matter and the phone continued to work fine up until this morning when the sliding of the touch screen became sticky; followed by the screen becoming black (as in no light atal). The phone must, in some capacity, still been turned on as I when I phoned it from the land line it still rang, as apose to going to answer phone; although there was no ringing/vibration from the handset.Anyway I read about a bit and this problem seemed not to be uncommon and was likely to resolve after the phone was restarted, only problem being I can't restart the phone without a power button and the full battery was going to take forever to drain when the phone had next to no function. Itunes was still recognisng the phone (although it wasn't allowing my to back up my contacts etc) so I tried to update the phone in the hope that this would also cause the phone to restart. However after the back up and the initializing, the update failed to launch and itunes no longer recognises my phone (have tried reinstalling/ different computer etc) and I am met with the error iphone error 0xE8000045. Following this the phone no longer rings when i try from the land line either. All of the fixes I have read about for this involve putting the phone into recovery mode, but with conventinal methods this isn't possible without the power button.Does anyone have any advice on what I should do? I'm kind of accepting the phone might be finished but I wouldn't like to let it go without a fight. I read something a method of forcing the phone into recovery mode without using the button? Don't know how legal that is ha.To summarise its an Iphone 4 GSM, about 14 months old, not sure what version it was on. Basically broke it even more trying to upgrade it to the latest operating system and now itunes won't recognise it whatsoever!

    DB:2.43:Iphone 4 "Bricked" With Broken Power Button. kz

    Hello sorry If this is already posted here, but I've been trying to sort this for hours and my brain is in a bad way, along with my phone lol.Around a month ago I dropped it and cracked the screen, then a few days later the power button jammed. (don't know if it was related as it worked for a few days after the drop, but probably is). Anyway not having a power button didn't really matter and the phone continued to work fine up until this morning when the sliding of the touch screen became sticky; followed by the screen becoming black (as in no light atal). The phone must, in some capacity, still been turned on as I when I phoned it from the land line it still rang, as apose to going to answer phone; although there was no ringing/vibration from the handset.Anyway I read about a bit and this problem seemed not to be uncommon and was likely to resolve after the phone was restarted, only problem being I can't restart the phone without a power button and the full battery was going to take forever to drain when the phone had next to no function. Itunes was still recognisng the phone (although it wasn't allowing my to back up my contacts etc) so I tried to update the phone in the hope that this would also cause the phone to restart. However after the back up and the initializing, the update failed to launch and itunes no longer recognises my phone (have tried reinstalling/ different computer etc) and I am met with the error iphone error 0xE8000045. Following this the phone no longer rings when i try from the land line either. All of the fixes I have read about for this involve putting the phone into recovery mode, but with conventinal methods this isn't possible without the power button.Does anyone have any advice on what I should do? I'm kind of accepting the phone might be finished but I wouldn't like to let it go without a fight. I read something a method of forcing the phone into recovery mode without using the button? Don't know how legal that is ha.To summarise its an Iphone 4 GSM, about 14 months old, not sure what version it was on. Basically broke it even more trying to upgrade it to the latest operating system and now itunes won't recognise it whatsoever!

  • RELEVANCY SCORE 2.43

    DB:2.43:Fim 2010 R2 Upgrade Paths cz


    Hi,
    Please could someone summarise the various upgrade paths when moving from FIM 2010 to FIM 2010 R2.
    Is there an in-place upgrade path?
    I assume a parallel FIM R2 deployment and a migration is another option.
    How do we chose which is the better upgrade path?
    Any other comments would be great.
    Thank you,
    SK

    DB:2.43:Fim 2010 R2 Upgrade Paths cz

    If you have large Synchronization environment [ex: ~200K objects], better go with R2 SP1 upgrade. It only takes few hours compared to couple of days with R2 RTM. in my testing, R2 took 48 hours and R2 Sp1 took 3 hours.. huge improvement. in reality, we can't
    have few days sync outages in production. there are many other perf. improvements in Sp1 especially group mgmt / criteria based groups populations.

    -Prakash

  • RELEVANCY SCORE 2.43

    DB:2.43:Is The Firewall In A Cisco 880 Enough To Protect My Vpn 7s



    I'm having vendors trying to scare me into replacing my Cisco routers ("which do nothing but route and don't have any security features") with Sonicwall or Netasq products which have more sophisticated firewalls, Internet filters and other features.

    I've got two offices with routers the small (4 people) has a Cisco 880 which was installed jan 2013 and the big (11 people) has a Cisco 877 which has worked faithfully for ten years but which I am planning to replace. The 877 provided wi-fi for our 250m² ground floor as well and I'm quite keen that its replacemment fulfill the same function.

    The vpn contains essentially an AD and a database and about 50 mobile users in various countries use it with a software client as well.

    So to summarise this newbie administrator would like your advice:

    When I read the specs it seems to me that there is a firewall in the 880, even a statefull firewall: surely this should be enough to keep my VPN safe?

    If so which model would you recommend for my "big" office?

    Thanks in advance for any advice you can give me

    Lucie

     

    DB:2.43:Is The Firewall In A Cisco 880 Enough To Protect My Vpn 7s


    Hi lucieoehlmann, i see that you are looking at replacing your current ISR, you may check the ISR 891W(http://cs.co/9004iebA), also with built in firewall and supports high performance. Feel free to message me for further assistance. Hope this helps! :)

    I have no idea who you are or what business unit (I think you must be from sales) you work for, but I'd like to recommend you be careful what you are doing.  

     

    1.  Cisco has announced the End-of-Sale/End-of-Support for 891/892 (including wireless variety).  The model number you've quoted, 891W, is included.  

    End-of-Sale and End-of-Life Announcement for the Select Cisco 891 and 892 Integrated Services Routers (02 Jan 2014)End-of-Sale and End-of-Life Announcement for the Select Cisco 891 and 892 Integrated Services Routers (19 Feb 2014)
    2.  Without knowing the technical details, like networking topology or WAN bandwidth, I'd be reluctant to recommend anything.  You're the one with a "Cisco" logo.  Consider what would happen when someone follows your recommendation and it doesn't work.  He could potentially go back to the seller (or social media) and ... well, you know how the rest of the story will go. 

  • RELEVANCY SCORE 2.43

    DB:2.43:Group By Summary zf


    Hi All,
    I've got a small programme in MS Project 2010, and am using 'Group By' function to summarise various phases.
    The summary value for 'duration' is not calculating correctly. Is showing the maximum duration within the group, rather than the latest finish minus earliest start. The start and finish dates for the summary bar are showing correctly though.
    This problem is only in MSP2010, the duration appears to calculate properly in MSP2007.
    Any suggestions?
    Thanks,
    Hugh.

    DB:2.43:Group By Summary zf

    Hugh,
    Why would you think logic is involved? I mean, does it make "logical" sense to restructure the fields that users are familiar with and have used for years? Wait, let me answer that. No, it doesn't, but that's what the developers decided to do when the
    manual scheduling mode was introduced. To me, it would have made much more sense to leave the existing familiar fields alone and create a whole new set of fields for manual mode (e.g. Manual Duration, Manual Start, etc.).

  • RELEVANCY SCORE 2.43

    DB:2.43:Re: Error In Function p1


    What's the error output message?

    DB:2.43:Re: Error In Function p1

    Just other way out, which I have tried with EMP table

    Here I am selecting ename where deptno is the one I pass in parameter.

    SQL Create or replace Function fEmpName (fdeptno number)
    2 Return varchar2
    3 as
    4 v_name varchar2(1000);
    5 Begin
    6 select nvl(replace(wm_concat(ename),',','/'),'-') into v_name from emp where deptno=fdeptno;
    7 return v_name;
    8 End;
    9 /

    Function created.

    SQL select fEmpName(30) from dual;

    FEMPNAME(30)
    ----------------------------------------------------------------------------------------------------
    ALLEN/WARD/MARTIN/BLAKE/TURNER/JAMES

    SQL select fEmpName(40) from dual;

    FEMPNAME(40)
    ----------------------------------------------------------------------------------------------------
    Walter

    SQL select fEmpName(55) from dual;

    FEMPNAME(55)
    ----------------------------------------------------------------------------------------------------
    -You can do this with simple sql stmt too..

    SQL select case when count(ename)=0 then '-' else
    2 replace(wm_concat(ename),',','/') end name from emp
    3 where deptno=10;

    NAME
    ---------------------------------------------------------
    CLARK/KING/MILLER

    SQL select case when count(ename)=0 then '-' else
    2 replace(wm_concat(ename),',','/') end name from emp
    3 where deptno=40;

    NAME
    ---------------------------------------------------------
    Walter

    SQL select case when count(ename)=0 then '-' else
    2 replace(wm_concat(ename),',','/') end name from emp
    3 where deptno=55;

    NAME
    ---------------------------------------------------------
    -Twinkle

  • RELEVANCY SCORE 2.43

    DB:2.43:Incomplete Record For Confirmation No. Xxxxxx : No Measured Value Indicated kz



    Dear All

    We have a scenario in which master inspection characteristic have sampling value,in inpsection plan few MIC have Single result and Some has summarise,we want to upload the data through BAPI,we are uploading through excel file,if all the data entered in excel file then there is no error,if any data not filled in it then tis not uploaded and gives error mentioned in subject

    DB:2.43:Incomplete Record For Confirmation No. Xxxxxx : No Measured Value Indicated kz


    I'm not sure I understand your question.

    What you stated appears to be fact, i.e. this is what is happening.

    So what is your question? You don't have a complete set of data so you get an error when you upload the data. That seems like a pretty straight forward issue. Are you surprised you are getting an error?

    Since you are uploading this via a custom program using a BAPI how in the heck are we to know what is programmed in that? Is your question about the BAPI? Your folks wrote the upload program!

    Did I miss something here?

    Craig

  • RELEVANCY SCORE 2.42

    DB:2.42:Ht2523 Tables In Text Edit 8k


    Hi there,I'm using TE to enter basic copy and have included some tables to summarise some points. After I saved and quit the document, I opened it back up to discover that the tables had disappeared. Is there any reason for this? Thanks so much.

    DB:2.42:Ht2523 Tables In Text Edit 8k

    Thanks for your speedy reply. I was already working in a Rich Text Document, so unsure why it didn't save the first time. However, I've tried it again and now the tables seem to have been preserved when saved as an .rtf doc. Thanks again!