• RELEVANCY SCORE 4.64

    DB:4.64:Im Gettting A Certificate Error Response When Trying To Sign On fa





    wondering why i'm getting a certificate error response when tyring to sign on

    DB:4.64:Im Gettting A Certificate Error Response When Trying To Sign On fa

    Also check your system date and time and make sure it is correct.

  • RELEVANCY SCORE 3.51

    DB:3.51:Firefox 31 On Osx Getting Certificate Error When Connecting To Logmein zd






    Hi,

    My Firefox on OSX was updated to version 31. Since then, I am gettting the following certificate error when connnecting to Logmein :

    Secure Connection Failed

    An error occurred during a connection to secure.logmein.com. Invalid OCSP signing certificate in OCSP response. (Error code: sec_error_ocsp_invalid_signing_cert)

    DB:3.51:Firefox 31 On Osx Getting Certificate Error When Connecting To Logmein zd

    FYI to anyone following this thread, as of this morning LMIC is working as expected with FF 31. /whew!

  • RELEVANCY SCORE 3.25

    DB:3.25:Word2010getting Sending Error 18





    gettting error when seding emails in word 2010

    DB:3.25:Word2010getting Sending Error 18

    Which office 2010 suite have you installed?

  • RELEVANCY SCORE 3.24

    DB:3.24:Nobody Knows... af


    I'm sending an XML request using SSL on port 443 and keep getting the error "javax.net.ssl.SSLHandshakeException: Could not find trusted certificate"

    I have used the keytool to import the servers certificate, and it shows that the cert is properly imported. After importing I still get the error.

    This error always pops up when trying to access the page through our webserver, but when loaded locally it submits and a response is generated...

    Please help!

    DB:3.24:Nobody Knows... af

    If you are launching via a link in a browser, you need to make sure that your JRE has the trusted certificate installed (%JRE_HOME%/lib/security/cacerts), not the JWS cache.

    The JWS cacerts file is used to allow you to launch apps from the JWS console.

    At least that's what I've seen from experience.... But by updating my JRE with my trusted certificates, I can launch my apps.

  • RELEVANCY SCORE 3.05

    DB:3.05:Cannot Install Network Solutions Ssl Certificate pk





    Hello,

    Im having a lot of trouble with installing a SSL certificate from Network Solutions.

    I had originally generated the CSR through IIS and installed the SSL certificate on the domain there. When I did that, the certificate did install successfully, but when I went to the domain through HTTPS, it kept trying to use the default SSL certificate (the Plesk one).

    My next step was to generate a CSR through Plesk and then have Network Solutions reissue the certificate. Now, when I try to upload the SSL certificate and the CA certificate in Plesk, I get an error message which says Error: Unable to set the certificate: Incompatible private key/certificate pair. Im not sure how to proceed at this point.

    Thanks,

    Ben

    DB:3.05:Cannot Install Network Solutions Ssl Certificate pk




    I would strongly recommend against trying to use a Network Solutions SSL cert if you are on Plesk for Windows. I spent hours researching myself and more hours on the phone with their support staff (who sucked, by the way) and at the end of the day, the certificate still would not install. Network Solutions support had no idea what the issue was.

    Finally, I just gave up and bought one through GoDaddy, which took me like 20 minutes to install.

    Thanks phytorian for mentioning that the subdomain needed to be on its own IP. That was necessary, and I didnt see it mentioned anywhere in the Plesk help files.

  • RELEVANCY SCORE 2.97

    DB:2.97:Unable To Renew The Webserver Certificate ; Error : No Certificate Templates Could Be Found ... js


    Hi
    I have been facing this issue when trying to renew the web server certificate from my CA .
    I get the error
    No Certificate templates could be found . You do not have permission to request a certificate from this CA, or an error occurred while accessing the active directory.
    Tried various steps , Kindly suggest a solution.

    Joyso Senior Messaging Admin

    DB:2.97:Unable To Renew The Webserver Certificate ; Error : No Certificate Templates Could Be Found ... js

    Are you using the Certificates MMC targeted at the local machine of the web server?

    The web server's computer account need to have Enroll permissions to a suitable certificate template. such as Web Server or a copy of it, and of course that template needs to be published at the CA (Check Certificate Templates in certsrv.msc).
    Elke

  • RELEVANCY SCORE 2.86

    DB:2.86:E-Mail Error 79





    We are gettting the following error message if we try to reply to an e-mail from Horde webmail.

    There was an error sending your message: unable to add recipient [****@*****.com]: Invalid response code received from server

    Any ideas on what might be generting this?

    Thanks,

    blemming

    DB:2.86:E-Mail Error 79




    Found the solution in this post:



    happyadmin
    Senior Member

    Registered: Sep 2003
    Location:
    Posts: 271
    RE: Horde problem ( Invalid response? )
    Dear Insomnia,

    Just add your server ip to the whitelist in the mail setup under the server tab in the admin.

    Regards,

  • RELEVANCY SCORE 2.82

    DB:2.82:Smartview Error While Opening Forms md


    Hi,

    We are trying to open data forms available in HFM application via smartview. In this most of the forms work well, however when we open few forms it throws the error "Stub recieved Bad data" error. Same forms open with out any error in UAT application. Did anybody had this issue before, if so please help me in gettting this resolved.

    Thanks,

    DB:2.82:Smartview Error While Opening Forms md

    I think you will likely need to open an SR on this one. I have not seen this and it may be application, environmental, or version specific. In any case you will for sure need to provide more details.

  • RELEVANCY SCORE 2.82

    DB:2.82:Certificate Error Navigation Blocked Messages When Trying To Log Into Facebook Account 7m


    I'm getting certificate error navigation blocked messages when trying to
    log into facebook account

    DB:2.82:Certificate Error Navigation Blocked Messages When Trying To Log Into Facebook Account 7m


    Hi,
    If you encounter a certificate error at a website you've visited before without errors, it's possible the website is not configured correctly.

    Step 1: Try retyping the address you're using. For example, if you're typing the address as https://example.com, try changing it to https://www.example.com.
    “About certificate errors”:
    http://windows.microsoft.com/en-us/Windows-vista/About-certificate-errors
    "There is a problem with this website's security certificate" when you try to visit a secured website in Internet Explorer” :

    http://support.microsoft.com/kb/931850

  • RELEVANCY SCORE 2.80

    DB:2.80:Acs Can Not Find Its Certificate From Storage f3



    Hello team:

    I am finding problems when trying to install a certificate to my ACS 4.2 (on Windows 2003 Server Standard Edition SP1 - English version). The certificate was enrolled from a Windows Certificate Authority (running on Windows 2003 Enterprise Edition SP2 -english version).

    The enrollment process was normal, and the certificate was installed on the local storage in the final step of the enrollment process ("The certificate you requested was issued to you": "Install this certificate" - Your new certificate has been successfully installed).

    But when I want ACS to acknowledge and install this certificate, an error message appears (System Configuration - ACS Certificate Setup - Install ACS Certificate - Use certificate from storage):

    "Certificate configuration error: Cannot find certificate with specified common name in the ACS storage"

    Has anybody run into a problem like this?

    Thank you very much in advance

    Rogelio Alvez

    DB:2.80:Acs Can Not Find Its Certificate From Storage f3


    Hi,

    Looking your  inputs to validate my understanding.

    We can instal the ceritifcate in ACS using opton "Use certificate from storage" and providing the valid CN name. As an option we can also use "Select Certificate From Storage" and choose a ceritifcate from the drop down list. I just want to understand if we must select the "Select Certificate From Storage" option or is it just an option. Along the same lines how is the drop down list populated?

    Thanks,

  • RELEVANCY SCORE 2.79

    DB:2.79:A Certificate With The Thumbprint...Already Exists. 9k


    There was a typo in my certificate and I have corrected it. I created a new certificate, submitted it to RapidSSL and received the response file which I saved. I am now trying to complete the pending request but I get the following error;
    Cannot import certificate. A certificate with the thumbprint 9F0535C475387C8AC95FA306DF8229F57DA09C3C already exists.
    How can I resolve this issue?

    DB:2.79:A Certificate With The Thumbprint...Already Exists. 9k

    I would suggest you recreate new certificate request in exchange 2010 console by recreating new ignoring the old and get rekeying with the new thumbprint from rapid ssl.
    While recreating it will automatically pull all the fqdn you were using during mailserver migration. Remove all those one from activesync, outlook anywhere, activesync and ensure you have proper fqdn and additional name in place.
    Rekey the certificate thumbprint with rapid ssl and obtain new public certificate, import the certificate and publish it again. While importing you will be asked to overwrite the existing certificate, select the required from list and submit. Then the certificate
    issue would be solved.
    For the outlook client may be cache would be the problem, you may need to reconfigure new outlook profile to stop the old cache address.
    All the bestRegards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.78

    DB:2.78:Error When Trying To Se Smtp Over Ssl z1



    Hi all ,

    I have a webdynpro application that sends mail using smtp over ssl .

    Ihvae imported the ca certificate to trused ca key store , but when I run the application I get the following error :

    javax.mail.MessagingException: Exception reading response;

    nested exception is:

    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

    could you please help

    Regards ,

    Oren

    DB:2.78:Error When Trying To Se Smtp Over Ssl z1


    Hi all ,

    I have a webdynpro application that sends mail using smtp over ssl .

    Ihvae imported the ca certificate to trused ca key store , but when I run the application I get the following error :

    javax.mail.MessagingException: Exception reading response;

    nested exception is:

    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target

    could you please help

    Regards ,

    Oren

  • RELEVANCY SCORE 2.75

    DB:2.75:Certificate Error While Sending And Receiving Message fs



    Hi Friends,

    When I am trying to send message from XI7.1 to our Business partner, I am getting error,

    Transmitting the message to endpoint https://xxx.xxx.xxx.xx:xxx/invoke/Bxxx_Alxxx.flows:sendOrder using connection BcAdapter failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 401 with message "[B2BSERV.0084.9004] Access Denied"..

    Without attaching certificate i am able to send message to partner by user name and password provided by partner, so I think there is some error in certificates.

    I Want to confirm, while sending I am giving our companies certificate view and entry in integration builder.Is it correct?

    Any other suggestion/?

    DB:2.75:Certificate Error While Sending And Receiving Message fs


    Hi,

    You need to use the certificate provided by your partner. Thus that certificate will be acceptable on your Business partner side. Also try to provide the proxy details if those are available.

    the Error code 401 indicates that the the expected certificate or User ID details are not valid. As you say the User Details are fine, then confirm with the certificate.

    You are on sender side then, you should follow the client certificate.

    Thanks

    Swarup

  • RELEVANCY SCORE 2.74

    DB:2.74:Sql Developer pp


    I am trying to create a connection to scott schema: ConnScott and the status keeps saying Failjure -ORA-28000: the account is locked and when I try to unlcok the account in SQL PLUS.I keep gettting the error message: ORA-12154: TNS:could not resolve
    the connect identifier specified.

    PLEASE HELP

    DB:2.74:Sql Developer pp

    scott schema is locked by default upon initial installation starting 10g (or perhaps earlier, I really can't remember). Connect with system to unlock.
    ORA 12154 means either there's a problem with your tnsnames.ora or you're missing the appropriate names.directory_path parameter in your sqlnet.ora
    As Stan210 mentioned, this is a SQL Server forum. You'll get better details from one of the Oracle usenet groups or metalink.
    Of course, you can also download an
    eval and give SQL Server a try. We're pretty good at answering those questions here. :-)
    No great genius has ever existed without some touch of madness. - Aristotle

  • RELEVANCY SCORE 2.73

    DB:2.73:Installing A Certificate 97


    I am trying to install a certificate from my company, and get an error when trying to install. Error/troubleshooting say to contact software manufacturer, apparently there is some changes to Internet Explorer that need to be made to allow me to add this certificate.

    DB:2.73:Installing A Certificate 97

    http://help.lockergnome.com/vista/save-certificate-IE7-Vista-3508-ftopict733.html

  • RELEVANCY SCORE 2.73

    DB:2.73:Thread: Digicert Ssl Certificate mp


    We are installing our first third party SSL certificate to one of our

    servers. The certificate is from DigiCert. We keep getting cannot read

    certificate revocation list error when trying to validate the

    certificate. Is there something else that we must do in order to get a

    third party certificate to work in our tree? DigiCert support is as lost

    as we are.

    Phil Arnold

    University of Central Arkansas

    DB:2.73:Thread: Digicert Ssl Certificate mp

    Phillip Arnold,

    cannot read

    certificate revocation list

    Does this help?

    http://www.novell.com/support/search...200%2046025734

    FWIW: I recently imported a cert and followed the procedures on DigiCert\'s website. No problem whatsoever importing, but could not connect to Apache. In that case, the fix was simple: Export the cert and create a new by importing it. Just in case you run into it.

    http://www.novell.com/support/search...200%2046025835

    - Anders Gustafsson, Engineer, CNE6, ASE

    NSC Volunteer Sysop

    Pedago, The Aaland Islands (N60 E20)

    Novell does not monitor these forums officially.

    Enhancement requests for all Novell products may be made at

    http://support.novell.com/enhancement

    Using VA 5.51 build 315 on Windows 2000 build 2600

  • RELEVANCY SCORE 2.73

    DB:2.73:Trying To Install Sp-3 In Windows 7. Keep Gettting Error 80070663 ka


    Any tips on avoiding error 80070663 for installation of Service Pack 3 in Windows 7?

    DB:2.73:Trying To Install Sp-3 In Windows 7. Keep Gettting Error 80070663 ka


    The latest Service Pack available for Windows 7 is Service Pack 1.

    To find out if you have Service Pack 1 installed:
    Click Start, right click Computer
    Click Properties
    Look under Windows Edition

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1

    Thanks for the response. That answers my question!

  • RELEVANCY SCORE 2.71

    DB:2.71:Trying To Buy Sendgrid 77


    I am trying to buy send grid and I am gettting the following error

    Credit Card is the only supported payment instrument for purchases

    DB:2.71:Trying To Buy Sendgrid 77

    Or because you using EA or Open License.

  • RELEVANCY SCORE 2.71

    DB:2.71:Error: Warning: The Ca Certificate Does Not Sign The Certificate. z8





    hi,

    i am getting this error when i am trying to upload the certificate and CA vertificate in PLESK 8.0

    the CA and Certificate has been generated from godaddy, and there is no problem

    after i get the error the certificate shows up but not in the certificate list on the domain where i can assign one

    please help

    i am in big trouble and we need to host SSL now

    apprecite ur help

    DB:2.71:Error: Warning: The Ca Certificate Does Not Sign The Certificate. z8




    hi,

    i am getting this error when i am trying to upload the certificate and CA vertificate in PLESK 8.0

    the CA and Certificate has been generated from godaddy, and there is no problem

    after i get the error the certificate shows up but not in the certificate list on the domain where i can assign one

    please help

    i am in big trouble and we need to host SSL now

    apprecite ur help

  • RELEVANCY SCORE 2.71

    DB:2.71:Capacity Issue 9a


    When using DVD decrypter at 70% of completion I am gettting a capacity error message. There is 160 gig of room on the drive I am dending the file to. Any thoughts?

    DB:2.71:Capacity Issue 9a

    When using DVD decrypter at 70% of completion I am gettting a capacity error message. There is 160 gig of room on the drive I am dending the file to. Any thoughts?

  • RELEVANCY SCORE 2.70

    DB:2.70:Digital Certificate Error 93


    I am trying to create a digital certificate.  When I run Selfcert.exe I type in the name of the certificate.  I get the error An error occurred during certificate creation.  Selfcert was unable to create your certificate.  I am running XP pro and Office 2003.  Any suggestions on how to fix? 
    Thanks.

    DB:2.70:Digital Certificate Error 93

    I spoke too soon.The certificate I created worked fine on my PC, but when one of my users tried to open the database I'd signed with it, Access 2003 crashed.Not and invalid certificate error, but a full blown Access has encountered a problem... shut down. :(Back to the drawing board.

  • RELEVANCY SCORE 2.69

    DB:2.69:Pxhelp20 Error In Thin App Photoshop Elements 9 sm



    When I an trying to create a package for photoshop elements 9 then I m getting following error like this while running the post scan on the system.

    "A new kernel mode pxhelp20 has been installed, which is not supported by thin app"

    and because of this error the package build process gettting failed. please help me on this.

    DB:2.69:Pxhelp20 Error In Thin App Photoshop Elements 9 sm


    i tried to capture adobe photoshop elements 10 and get the same error/mesage. i can build the package without problem, but it crashes from time to time (see screenshot). very often if you start it the first time. is it really supported for thinapp?

    Thank You

    PS: Win7 32Bit, ThinApp Ver. 4.7.7101

  • RELEVANCY SCORE 2.69

    DB:2.69:Cant Send Email, Keep Gettting Error Ox800cccoe 8k


    No matter what I do I cant send email out. I have changed my password and Windows Live Mail opens up with my name in upper right corner but when I hit send on an outgoing email it says connection Failed and Error Ox800cccOE comes up. I've been trying
    to get this fixed for 24 hours...Help

    DB:2.69:Cant Send Email, Keep Gettting Error Ox800cccoe 8k

    You're welcome. I don't even use WLMail so someone else will have to help with your other post. Never did like the program and switched to Thunderbird real quick.

  • RELEVANCY SCORE 2.68

    DB:2.68:Thread: Ifolder 3.7 Ssl Connectivity To Active Directory jz


    Hi,

    We\'ve been trying to get iFolder 3.7 to authenticate against AD using

    SSL for some time without success. We can authenticate fine using clear

    text (port 389) however. We are getting this error when trying to

    accept the SSL certificate:

    Accept LDAP Certificate? [Y]:

    Done

    Connecting to ldaps://AD Server/...Detected errors in the Server

    Certificate:

    -2146762486

    Failed

    LdapException: (91) Connect Error

    System.IO.IOException: The authentication or decryption has failed.

    My colleague Jon has posted on this problem a couple weeks ago and we\'ve

    not seen any response. Isn\'t there ANYONE using AD over SSL to

    authenticate users to iFolder? I would think there would be similar

    issues using SSL against OpenLDAP also.

    Any ideas would be greatly appreciated!

    Best regards,

    Greg

    DB:2.68:Thread: Ifolder 3.7 Ssl Connectivity To Active Directory jz

    Thanks for the quick reply, Wyld!

    So you\'re saying that if we uncheck the 389 and just only do 636 it

    should work? I don\'t think we tried that...will give it a go. One of

    the things we noticed is that we can\'t get the LDAP browser to work

    against the AD directory over 636 either, getting an invalid certificate

    error... We were thinking it had something to do with the SSL setup on

    the AD server.

    Thanks again,

    Greg

    wyld wrote:

    I Had test AD and Openldap, which configured SSL (636) but ifolder

    configure connect to LDAP by using LDAPS , it will configure fail;

    un-check the setting (using 389) , ifolder could connect the two LDAP

    Server fine.

    I think that whether iFolder need other methods that import ertificate

    to ifolder server or not.

    wyld

  • RELEVANCY SCORE 2.67

    DB:2.67:Invalid Certificate 80072f0d Wm5 Trusted Ca kc


    Hi all,
    Ok, I am gettting the 80072f0d Invalid Certificate error when trying to sync my WM5 PPC6700.  I am using a trusted CA, Comodo, and have installed the cert on the device as well.  I am still getting the error though.  I am going through a ISA 2004 server and OWA works like a champ.  I am not really sure what else to try.
    Any suggestions would be appreciated.
     
    TIA,
    John

    DB:2.67:Invalid Certificate 80072f0d Wm5 Trusted Ca kc

    Thanks for the reply. What I ended up having to do was export the cert again from my FE server as a PFX with the cert chain.  Download the PFX import tool, copy both to my PPC6700, run the import tool, import the PFX and then it worked.
    Do you know if this is the easiest way to make it work?  I find it hard to believe that I have to jump through all these hoops to make WM5 work w/ Active Sync when we are using a puplic trusted CA cert.
    Thanks,
    John

  • RELEVANCY SCORE 2.67

    DB:2.67:Unable To Login sp


    Hi all,
    I just cloned my 11i instance. when trying to login gettting error "Unable to execute function. (FUNCTION_ID=28910)".
    database is 10.2.0.4
    OS is AIX

    Please suggest.

    DB:2.67:Unable To Login sp

    Hi,

    Please check Apache log files for details about the error.

    Did AutoConfig complete successfully?

    Thanks,
    Hussein

  • RELEVANCY SCORE 2.67

    DB:2.67:Http 302 Error In Simulator mz



    Hi All,

    I am getting Htpp 302(before getting this response its showing certificate prompting, and if i pressed "view crtificate" it showing one level of certificate,then "coninue" it showing 302 response code)in simulator when I am trying to connect to a link , but if we use same link in simulator browser its working fine means its getting 401 error,becuase we didnt provide any credentials.

    Before getting this response code i found following excecution.

    SSL:-CHSSL:-SHSSL:-SCSSL:-SKESSL:-SHDSSL:-CKESSL:-CCSTLS:-FTLS:-F

    Can you tel me what is happening here exacly,I am thinking that its a certificate issue.Or is there any inconsistant server behaviour.In Android the same link is working fine.

    Looking Forward,

    Harinadh.

    DB:2.67:Http 302 Error In Simulator mz


    Hi All,

    I am getting Htpp 302(before getting this response its showing certificate prompting, and if i pressed "view crtificate" it showing one level of certificate,then "coninue" it showing 302 response code)in simulator when I am trying to connect to a link , but if we use same link in simulator browser its working fine means its getting 401 error,becuase we didnt provide any credentials.

    Before getting this response code i found following excecution.

    SSL:-CHSSL:-SHSSL:-SCSSL:-SKESSL:-SHDSSL:-CKESSL:-CCSTLS:-FTLS:-F

    Can you tel me what is happening here exacly,I am thinking that its a certificate issue.Or is there any inconsistant server behaviour.In Android the same link is working fine.

    Looking Forward,

    Harinadh.

  • RELEVANCY SCORE 2.67

    DB:2.67:Received Certificate Error When Trying To Access The Account On Android Tablet 4.1.1 cm


    Outlook.com, Hot mail and any Microsoft e-mail app show a security warning saying certificate not valid. What do I do ?

    DB:2.67:Received Certificate Error When Trying To Access The Account On Android Tablet 4.1.1 cm

    Hi JohnL46,

    I am sorry for the delayed response. Let me assist you with your issue about receiving a certificate error when trying to access your account.

    Kindly try todisable the HTTPS option inyouraccount usingborwser on the computer. Follow the steps below for instructions:

    1. Log in to this link.

    2. Choose Don't use HTTPS automatically.
    3. Click on Save.
    After doing the steps above perform the following steps on your phone

    1.Remove email account from the Hotmail app.
    2.Add the account again on
    Mobile data not wifi.
    3.It should give the following message
    "The server is using a self-signed authentication certificate. Do you want to login anyway?"
    Click
    Accept

    Hope this helps. If above resolution didn't fix your issue, post back here.

    Thanks.

  • RELEVANCY SCORE 2.66

    DB:2.66:Thread: How To Replace Self-Signed Ca Certificate With A Third Party 3m


    I need help to replace self-signed CA certificate that was installed during initial installation with a third party CA. Here are the steps that I already done.

    1. I created new Server Certificate in iManager - Novell Certificate Access - Server Certificate.

    2. Generated CSR and received a certificate from third part CA (GoDaddy.com).

    3. Now I see status Import in Certificate Status column across third party Server certificate.

    4. I\'m trying to Import the certificate , but when I click Finish button I\'m receiving error message:

    SSL Certificate Go Daddy FailPKI Error -1226 A certificate was not found in the NDS tree certificate authority (CA) object or Server Certificate Object (also known as the Key Material Object).

    DB:2.66:Thread: How To Replace Self-Signed Ca Certificate With A Third Party 3m

    * vsurinovich wrote, On 04/06/2013 12:06 AM:

    Does anyone know where a

    file with a private key located?

    Since you generated the CSR in eDir, you should find it there and export it.

    Uwe

    -' + '-

    Novell Knowledge Partner (NKP)

    Please don\'t send me support related e-mail unless I ask you to do so.

  • RELEVANCY SCORE 2.65

    DB:2.65:Error With New-Edgesubscription pa


    Hi there,I'm gettting the following error when I run the new-EdgeSubscription cmdlet on my new Edge Server server/guest. It is the same as my full Exchange server/guest, with the exception of being Windows Server 2008 x64 Standard instead of Enterprise:New-EdgeSubscription : The task couldn't add the certificate to the ADAM directory service store. Error: Access is denied..At line:1 char:21+ New-EdgeSubscription -FileName Z:\Exchange\NewSub.xml -Site mysite.orgBarnaby Duncan
    barnaby@naiahedc.org

    DB:2.65:Error With New-Edgesubscription pa

    hi ,1. try to delete exchange self signed certificate from MMC console.2. Create new Certificate. ( New-edgecertificate).3. the account that u r using must be local admin on the edge server.4. create New edge subscribtion (.xml file).5. Copy this file to the HUB server.6.on the hub server use exchange admin account to make the edge subscription on hub.7. then on hub server open the exchange shell run start-edgesynchronization.check the result.

  • RELEVANCY SCORE 2.65

    DB:2.65:0xe8008001 83


    I'm trying to download an app i purchased through itunes on my laptop, to my iphone 3gs. I keep gettting error 0xE8008001. Can anyone help me?

    DB:2.65:0xe8008001 83

    Any possibility you ended up with apps in your iTunes library that were either dragged and dropped in from somewhere rather than actually downloaded from the app store? You may have an app that's corrupt as well.If it's one particular app, I'd say delete it from iTunes and re-download it. You should not be charged a second time if you've already purchased it (with the same Apple ID). If nothing else above applies, I'd say it sounds like the app itself is corrupt somehow.

  • RELEVANCY SCORE 2.65

    DB:2.65:Secured Webservice Java Net Socketexception Ssl Implementation Not Avail p7


    Hi all,
    i am trying to call a secured webservice (which has authentication and trusted certificate) from plsql by using a java stub generated using JDeveloper 10.1.
    I called the java method using a wrapper procedure for the java class in plsql.
    While trying to call the webservice i am gettting the following exception

    SOAPException: faultCode=SOAP-ENV:Client; msg=Error opening socket: java.net.SocketException: SSL implementation not available; targetException=java.lang.IllegalArgumentException: Error opening socket: java.net.SocketException: SSL implementation not available
    *** 2010-02-06 18:32:14.155
    at org.apache.soap.transport.http.SOAPHTTPConnection.send(SOAPHTTPConnection.java:436)
    at org.apache.soap.messaging.Message.send(Message.java:125)

    The problem happens only when i call a secured webservice, whereas i can able to call the certificate less common webservices. Please provide a way to proceed.

    Thanks,
    Ramesh.R

    DB:2.65:Secured Webservice Java Net Socketexception Ssl Implementation Not Avail p7

    The name of this forum is "Database - General" not "Java and SOAP and stuff"

    Please change the subject to "Please Ignore" and post in the correct Java group.

    Thank you.

  • RELEVANCY SCORE 2.64

    DB:2.64:Changing Expired Mpns Certificates Causes A 403 Error Response 17


    Our MPNS certificate expired so we bought another and uploaded it successfully to dev center, but we were receiving 403 forbidden error when trying to submit pushes. I read that the friendly names on the certificates had to match, so I updated the friendly
    name to match and uploaded the adjusted certificate, but instead of replacing the previous uploaded certificate I now have two certificates with the same thumbprint showing which does not look correct. We are still receiving the 403 Forbidden errors:
    403 - Forbidden: Access is denied.

    You do not have permission to view this directory or page using the credentials that you supplied.
    How do we get MPNS back online, and delete the duplicate certificate?

    DB:2.64:Changing Expired Mpns Certificates Causes A 403 Error Response 17

    The issue seems to be around the certificate was exported with the extended properties included. No errors were shown and the certificate uploaded fine but wasn't being accepted at the MPNS URI's. We exported the certificate again without the extended properties
    being included and it resolved the issue when using this certificate.
    Frustratingly the certificate shouldn't be accepted in dev centre if it is unusable, and a clear error message displayed, as this would have saved me and my team many hours of trial and error.

  • RELEVANCY SCORE 2.64

    DB:2.64:Record 1 :Contents Pc From Field G_Uabsmg Cannot Be Converted In 9c



    Hi Experts,

    When iam trying to load transaction data i'm gettting fallowing error.

    Pls suggest.

    Record 1 :Record 1 :Contents PC from field G_UABSMG cannot be converted in type QUAN -longtext.

    Siri

  • RELEVANCY SCORE 2.63

    DB:2.63:Incorrect Sslservercertificatechainfilename xk



    I am trying to use trail certificate on WLS 6.1 to connect to secure server.

    I am getting following error while getting response back to our server

    ----
    java.io.IOException: weblogic.security.AuthenticationException: Incorrect encrypted
    block possibly incorrect SSLServerCertificateChainFileName set for this server
    certificate
    at weblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:171)
    ----

    I would appreciate help from anyone out there.

    regards

    DB:2.63:Incorrect Sslservercertificatechainfilename xk


    Dear Utpal,

    Can you send me a mail to my mailID. I am not able to go ahead with the this problem.

    regards
    Subramanyam
    "Utpal" ugandhi_99@yahoo.com wrote:
    Refer to,

    http://groups.google.com/groups?hl=enlr=ie=UTF-8oe=UTF-8threadm=3B96B07C
    ..A92A501%40directcommerce.comrnum=7prev=/groups%3Fq%3Dweblogic.security.Ci
    pherException%253A%2BIncorrect%2Bencrypted%2Bblock%26ie%3DUTF-8%26oe%3DUTF-8
    %26hl%3Den

    -utpal

    "Subramanyam" ksubramanyam@lgsoftindia.com wrote in message
    news:3e3a0089@newsgroups.bea.com...
    Steps done:

    1. I have installed weblogic 6.1 with sp2
    2. Applied service pack sp4
    3. Generated CSR using mydomain Generated on same machine where weare
    hosting
    the application
    4. Got trial certificate from verisign
    a. certificate cert.pem
    b. CA root getcacert.cer getcacert.der renamed .cer to .der
    5. Set following values for SSL in weblogic server
    a. ServerKeyFileName -- key.pem generated while CSR
    b. ServerCertificateFileName -- cert.pem
    c. ServerCertificateChainFileName -- getcacert.der
    6. After configuration started WLS 6.1 server for the new applicationdomain
    7. Started without any error.
    8. I am able to browse the application using http or https protocol
    9. This application provides online buying which has interface withpayment gateway
    10. There is server to server communication between merchant server(our
    WLS 6.1
    server) and payment gateway server.
    11. I am getting error while I am getting response from payment gatewayserver.
    Following is error:

    --------
    weblogic.security.CipherException: Incorrect encrypted block
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:208)
    at weblogic.security.RSAMDSignature.verify(RSAMDSignature.java:89)
    at weblogic.security.X509.verifySignature(X509.java:243)
    at weblogic.security.X509.verify(X509.java:172)
    atweblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:131)
    atweblogic.security.SSL.SSLCertificate.input(SSLCertificate.java:115)
    at weblogic.security.SSL.Handshake.input(Handshake.java:118)
    atweblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:1160)
    at weblogic.security.SSL.SSLSocket.clientInit(SSLSocket.java:450)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:297)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:243)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:128)
    atweblogic.security.SSL.SSLSocketFactory.createSocket(SSLSocketFactory.java:50
    )
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:117)
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:175)
    at weblogic.net.http.HttpsClient.init(HttpsClient.java:84)
    atweblogic.net.http.HttpsURLConnection.getHttpClient(HttpsURLConnection.java:1
    47)
    atweblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:126)
    atweblogic.net.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1
    58)
    atcom.tienda.order.PaymentAction.invokeBankServlet(PaymentAction.java:861)
    atcom.tienda.order.PaymentAction.sendStatusQuery(PaymentAction.java:557)
    atcom.tienda.order.PaymentAction.processBankResponse(PaymentAction.java:216)
    at com.tienda.order.PaymentAction.service(PaymentAction.java:150)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :262)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :198)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2637)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2359)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    java.io.IOException: weblogic.security.AuthenticationException: Incorrectencrypted
    block possibly incorrect SSLServerCertificateChainFileName set forthis
    server
    certificate
    atweblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:171)
    atweblogic.security.SSL.SSLCertificate.input(SSLCertificate.java:115)
    at weblogic.security.SSL.Handshake.input(Handshake.java:118)
    atweblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:1160)
    at weblogic.security.SSL.SSLSocket.clientInit(SSLSocket.java:450)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:297)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:243)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:128)
    atweblogic.security.SSL.SSLSocketFactory.createSocket(SSLSocketFactory.java:50
    )
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:117)
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:175)
    at weblogic.net.http.HttpsClient.init(HttpsClient.java:84)
    atweblogic.net.http.HttpsURLConnection.getHttpClient(HttpsURLConnection.java:1
    47)
    atweblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:126)
    atweblogic.net.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1
    58)
    atcom.tienda.order.PaymentAction.invokeBankServlet(PaymentAction.java:861)
    atcom.tienda.order.PaymentAction.sendStatusQuery(PaymentAction.java:557)
    atcom.tienda.order.PaymentAction.processBankResponse(PaymentAction.java:216)
    at com.tienda.order.PaymentAction.service(PaymentAction.java:150)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :262)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :198)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2637)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2359)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    weblogic.security.CipherException: Incorrect encrypted block
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:208)
    at weblogic.security.RSAMDSignature.verify(RSAMDSignature.java:89)
    at weblogic.security.X509.verifySignature(X509.java:243)
    at weblogic.security.X509.verify(X509.java:172)
    atweblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:131)
    atweblogic.security.SSL.SSLCertificate.input(SSLCertificate.java:115)
    at weblogic.security.SSL.Handshake.input(Handshake.java:118)
    atweblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:1160)
    at weblogic.security.SSL.SSLSocket.clientInit(SSLSocket.java:450)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:297)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:243)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:128)
    atweblogic.security.SSL.SSLSocketFactory.createSocket(SSLSocketFactory.java:50
    )
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:117)
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:175)
    at weblogic.net.http.HttpsClient.init(HttpsClient.java:84)
    atweblogic.net.http.HttpsURLConnection.getHttpClient(HttpsURLConnection.java:1
    47)
    atweblogic.net.http.HttpsURLConnection.connect(HttpsURLConnection.java:126)
    atweblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:28
    1)
    atweblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnecti
    on.java:29)
    atweblogic.net.http.HttpURLConnection.getInternalResponseCode(HttpURLConnectio
    n.java:659)
    atweblogic.net.http.HttpURLConnection.getResponseCode(HttpURLConnection.java:6
    44)
    atcom.tienda.order.PaymentAction.invokeBankServlet(PaymentAction.java:885)
    atcom.tienda.order.PaymentAction.sendStatusQuery(PaymentAction.java:557)
    atcom.tienda.order.PaymentAction.processBankResponse(PaymentAction.java:216)
    at com.tienda.order.PaymentAction.service(PaymentAction.java:150)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :262)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :198)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2637)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2359)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    weblogic.security.CipherException: Incorrect encrypted block
    at weblogic.security.RSApkcs1.decrypt(RSApkcs1.java:208)
    at weblogic.security.RSAMDSignature.verify(RSAMDSignature.java:89)
    at weblogic.security.X509.verifySignature(X509.java:243)
    at weblogic.security.X509.verify(X509.java:172)
    atweblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:131)
    atweblogic.security.SSL.SSLCertificate.input(SSLCertificate.java:115)
    at weblogic.security.SSL.Handshake.input(Handshake.java:118)
    atweblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:1160)
    at weblogic.security.SSL.SSLSocket.clientInit(SSLSocket.java:450)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:297)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:243)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:128)
    atweblogic.security.SSL.SSLSocketFactory.createSocket(SSLSocketFactory.java:50
    )
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:117)
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:175)
    at weblogic.net.http.HttpsClient.init(HttpsClient.java:84)
    atweblogic.net.http.HttpsURLConnection.getHttpClient(HttpsURLConnection.java:1
    47)
    atweblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:31
    3)
    atweblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnecti
    on.java:29)
    atweblogic.net.http.HttpURLConnection.getInternalResponseCode(HttpURLConnectio
    n.java:659)
    atweblogic.net.http.HttpURLConnection.getResponseCode(HttpURLConnection.java:6
    44)
    atcom.tienda.order.PaymentAction.invokeBankServlet(PaymentAction.java:885)
    atcom.tienda.order.PaymentAction.sendStatusQuery(PaymentAction.java:557)
    atcom.tienda.order.PaymentAction.processBankResponse(PaymentAction.java:216)
    at com.tienda.order.PaymentAction.service(PaymentAction.java:150)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :262)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :198)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2637)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2359)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    EXCEPTION :: PaymentAction :: sendStatusQuery() :: IOEXCEPTION forOrder
    ID: 290306580301
    java.io.IOException: weblogic.security.AuthenticationException: Incorrectencrypted
    block possibly incorrect SSLServerCertificateChainFileName set forthis
    server
    certificate
    atweblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:171)
    atweblogic.security.SSL.SSLCertificate.input(SSLCertificate.java:115)
    at weblogic.security.SSL.Handshake.input(Handshake.java:118)
    atweblogic.security.SSL.SSLSocket.getHandshake(SSLSocket.java:1160)
    at weblogic.security.SSL.SSLSocket.clientInit(SSLSocket.java:450)
    at weblogic.security.SSL.SSLSocket.initialize(SSLSocket.java:297)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:243)
    at weblogic.security.SSL.SSLSocket.init(SSLSocket.java:128)
    atweblogic.security.SSL.SSLSocketFactory.createSocket(SSLSocketFactory.java:50
    )
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:117)
    at weblogic.net.http.HttpsClient.openServer(HttpsClient.java:175)
    at weblogic.net.http.HttpsClient.init(HttpsClient.java:84)
    atweblogic.net.http.HttpsURLConnection.getHttpClient(HttpsURLConnection.java:1
    47)
    atweblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:31
    3)
    atweblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnecti
    on.java:29)
    atweblogic.net.http.HttpURLConnection.getInternalResponseCode(HttpURLConnectio
    n.java:659)
    atweblogic.net.http.HttpURLConnection.getResponseCode(HttpURLConnection.java:6
    44)
    atcom.tienda.order.PaymentAction.invokeBankServlet(PaymentAction.java:885)
    atcom.tienda.order.PaymentAction.sendStatusQuery(PaymentAction.java:557)
    atcom.tienda.order.PaymentAction.processBankResponse(PaymentAction.java:216)
    at com.tienda.order.PaymentAction.service(PaymentAction.java:150)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :262)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :198)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2637)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2359)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    Jan 29, 2003 3:06:11 PM IST Error HTTP[WebAppServletContext(2972848,webINMallApp,/webINMallApp)]
    Servlet failed with Exception
    java.lang.StringIndexOutOfBoundsException: String index out of range:-1
    at java.lang.String.substring(String.java:1519)
    atcom.tienda.order.PaymentAction.sendStatusQuery(PaymentAction.java:565)
    atcom.tienda.order.PaymentAction.processBankResponse(PaymentAction.java:216)
    at com.tienda.order.PaymentAction.service(PaymentAction.java:150)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :262)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :198)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2637)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2359)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    --------

    regards
    Subramanyam

    "Utpal" ugandhi_99@yahoo.com wrote:
    I am not quite sure if I understood your problem. Could you tell meif
    you
    have successfully
    set up the SSL on your weblogic server 6.1? Do you get any error about
    SSL
    setup during
    weblogic startup?
    could you post the entire trace from the begining?
    -utpal

    "Subramanyam" ksubramanyam@lgsoftindia.com wrote in message
    news:3e3903f8$1@newsgroups.bea.com...
    I am trying to use trail certificate on WLS 6.1 to connect to secureserver.
    I am getting following error while getting response back to ourserver
    ----
    java.io.IOException: weblogic.security.AuthenticationException:Incorrect
    encrypted
    block possibly incorrect SSLServerCertificateChainFileName set forthis
    server
    certificate
    atweblogic.security.SSL.SSLCertificate.verify(SSLCertificate.java:171)
    ----

    I would appreciate help from anyone out there.

    regards

  • RELEVANCY SCORE 2.63

    DB:2.63:Secured Webservice Java Net Socketexception Ssl Implementation Not Avail kz


    Hi all,
    i am trying to call a secured webservice (which has authentication and trusted certificate) from plsql by using a java stub generated using JDeveloper 10.1.
    I called the java method using a wrapper procedure for the java class in plsql.
    While trying to call the webservice i am gettting the following exception

    SOAPException: faultCode=SOAP-ENV:Client; msg=Error opening socket: java.net.SocketException: SSL implementation not available; targetException=java.lang.IllegalArgumentException: Error opening socket: java.net.SocketException: SSL implementation not available
    *** 2010-02-06 18:32:14.155
    at org.apache.soap.transport.http.SOAPHTTPConnection.send(SOAPHTTPConnection.java:436)
    at org.apache.soap.messaging.Message.send(Message.java:125)The problem happens only when i call a secured webservice, whereas i can able to call the certificate less common webservices. Please provide a way to proceed.

    Thanks,
    Ramesh.R

    Edited by: Ramesh_R on Feb 6, 2010 5:11 AM

    DB:2.63:Secured Webservice Java Net Socketexception Ssl Implementation Not Avail kz

    Hi,
    thanks for your reply.
    i have placed the location in the classpath of the machine(mean environment variables).what does oralce's jvm classpath mean and where it resides?
    Please help i have been in this issue for 5 days :-( with the same error.

    Thanks,
    Ramesh.R

  • RELEVANCY SCORE 2.62

    DB:2.62:Database Control kp


    Am trying to invoke a Oracle SQL procedure thro' DB Control.

    Am gettting "invalid SQL statement" error while executing..

    Any suggestions?

    DB:2.62:Database Control kp

    Try this,

    /**
    * @jc:sql statement="call procname()"
    */
    void callProcedure();

    - AM

  • RELEVANCY SCORE 2.62

    DB:2.62:During Dtp Execute Gettting Error??? 3a


    Hello FriendsPls look below screen shot error, When i am executing DTP so i got the errorso kindly advive me how could be rectify this errorThanksRegardsWaseem

    DB:2.62:During Dtp Execute Gettting Error??? 3a

    HI waseem,Can you followthe following steps it will solve your issue.1)delete red request from data target2)go to PSA fileter on PADESC find out wrong value3)correct it and load.hope it will solve your issue.Regards,Ganesh Bothe

  • RELEVANCY SCORE 2.62

    DB:2.62:Iphone Syncing, Keep Gettting Error Cannot Sync To Many Files Open Currently 8d


    iphone syncing, Keep gettting error cannot sync to many files open currently

    DB:2.62:Iphone Syncing, Keep Gettting Error Cannot Sync To Many Files Open Currently 8d

    After reading many suggestions, like turn off sharing etc. I discovered why iPod-iTunes sync is suddenly not working.Too many push notifications!When a application is installed you are often asked "do you want push notifications?", to which most answer "yes". However, each time an app. uses-up resources.Solution: Go the iPad/iPhone notifications and turn the least useful off.(Turning off sharing might work when you have almost enough resources left!)Paul

  • RELEVANCY SCORE 2.62

    DB:2.62:Keep Getting Error Code 646 When Trying To Install Kb 2754670 p8


    I keep gettting error code 646 when I try to install KB 2754670 with Windows Update. How I fix this error?

    DB:2.62:Keep Getting Error Code 646 When Trying To Install Kb 2754670 p8


    There are a few solutions to your problem, try this first and see how it goes.

    A KB has been crəated for the 646 error code that appəars when installing Microsoft Office Updates.

    The KB includes an automated Microsoft Fix it 50461 that corrects the issue.

    Look at the following KB:
    http://support.microsoft.com/kb/2258121
    Suggest you download and save the Fix it.
    Then close all open programs and browsers prior to running MS Fix it 50461.msi.
    Make sure "all" non-essəntial devices are unplugged. ( USB keys or any external media as this takes place.).
    Let us know if this helped

    OR

    1. Turn off UAC. Don't just lower down the restrictions - turn it off completely.
    2. Restart your computer for the change to take into effect.
    3. Re-download Security Update for Microsoft Works 9 (KB2754670) from the link below:
    http://www.microsoft.com/en-us/download/search.aspx?q=KB2754670
    4. Install it.

    5. When the update finished reapply your original UAC settings

    Save the update to a place on your hard drive you can find and then install the update from thəre.

    Download, *save*, and install the KB2754670 with no security software (antivirus/security suite) installed, disconnect from Internet, disable the fire-wall
    close all non-essential process in the task manager (i.e., anything with an icon on the taskbar) (all of them, basically) from the system tray (lower right)..
    I also recommend taking off USB keys or any external media as this takes place.

    TIP: Save the download to your desktop, right-click on the saved file and select Run as Administrator.
    Please let us know if this did or didn't həlp to resolve your problem.

  • RELEVANCY SCORE 2.62

    DB:2.62:Windows Azure Upload Certificate Error ck


    I am getting the following error when trying to upload to azure.
    The certificate with thumbprint cert thumb was not found.

    DB:2.62:Windows Azure Upload Certificate Error ck

    I've done those steps. Seems that i need to update the current cert.

  • RELEVANCY SCORE 2.62

    DB:2.62:Certificate Error When Trying To Install Trust Certificate To Open Oracle Site Within Vpn. pd


    Original Title: error certificate
    Hi all daily iam connected to client site through cisco vpn. but i tried to open oracle site with in VPN i need to

    install trust certificate. but when i install that i got the certificate error. i also rename my profile and tries again and
    again. but iam getting same issue,so what was the issue? pls help me.

    DB:2.62:Certificate Error When Trying To Install Trust Certificate To Open Oracle Site Within Vpn. pd

    ​Hi,

    The issue you posted is related to Technet and would be better suited in the Technet community. Please visit the link below to find a community that will offer the best support.
    http://social.technet.microsoft.com/Forums/en-us/w7itpronetworking/threads

  • RELEVANCY SCORE 2.61

    DB:2.61:How Do I Fix This Problem Certificate Error Navigation Blocked xp


    When I try to access the AKO website this is the response I get: Problem with website's security certificate. Also, Certificate Error: Navigation Blocked.
    How can I remedy this situation?

    DB:2.61:How Do I Fix This Problem Certificate Error Navigation Blocked xp

    Hi,
    Which operating system are you working on?

    You can refer the following articles on certificate errors
    About certificate errors
    http://windows.microsoft.com/en-us/Windows7/About-certificate-errors

    Certificate errors: frequently asked questions
    http://windows.microsoft.com/en-US/windows7/Certificate-errors-frequently-asked-questions

    As a work around you can try the following steps
    a) Open Internet Explorer and verify that the page you are trying to view is listing a certificate error.
    b) To clear the certificate error click on ‘Tools’ then ‘Internet Options’ from the menu of Internet Explorer 9
    c) Click on the ‘Advanced’ tab and scroll down to the security section. Clear the boxes for: “Check for publisher's certificate revocation" and "Check for server certificate revocation".
    d) Click Apply and Ok.
    e) Attempt to reload the page by clicking the Refresh button at the end of the address bar or by pressing the F5 key. Your page should now load as expected.

  • RELEVANCY SCORE 2.61

    DB:2.61:Failed Certificate Import am



    receiving % Error in saving certificate: status = FAIL

    when trying to import a certificate on ASA running 8.2.

    Certificate is a capf_trustpoint for Phone Proxy configuration.

    DB:2.61:Failed Certificate Import am


    Hi Brett,

    I've found the same issue trying to import callmanager certificates. Please check:

    https://supportforums.cisco.com/docs/DOC-1688#cf

    I still haven't found the solution.

    Regards,

    Jesus

  • RELEVANCY SCORE 2.61

    DB:2.61:Ocsp Issue - Unable To Get Good Response From Online Responder xa


    Hi all,
    I'm trying to setup windows server (2008 R2 enterprise) as Online Responder to serve requests for third party certificates (created by OpenSSL).
    I tried followingMicrosoftguide and also looked at Brian Komar book (Windows server 2008 PKI and certificate security) with no success.
    I setup root CA, IIS and Online Responder (using Windows rootCA and selectingmanuallythe signing certificate) and everything looks fine under AD certificate services screens.
    When I send OCSP request to my server I get OCSP response status - unauthorized (6).
    I enabled nonce but it didn't help.
    I also tried creating revocation configuration using my third party root CA but then I got an error under the PKI screen:
    OCSP Location#1 ERROR http://win-24agiegr6m/ocsp
    Anyone has any idea what I'm doing wrong ?
    Thanks,
    Tal

    DB:2.61:Ocsp Issue - Unable To Get Good Response From Online Responder xa

    Let me correct myself.
    OpenSSL has a bug in function ocsp_basic_verify which cause verification error when trying to check the root of the signing certificate.

    Tal

  • RELEVANCY SCORE 2.61

    DB:2.61:Ssl/Entrust Intermedate Certificate Issue dm


    I have what I hope will be a simple question. Iu2019m trying to get an Entrust Certificate properly imported into my Portal u2013 weu2019ve done this before with our CA but have recently been acquired and need a globally trusted certificate. I generated the CSR and send it to Entrust. I get back two certificates the response and the chain. I import the response and when I access the Portal it tells me there is a problem with the certificate. It shows the certificate to be from Entrust; however it appears the chain is missing u2013 presumably the intermediary certificate. If I import the chain certificate into the client browser it works fine; however it is not something we want to do for 10k desktops. Iu2019ve tried to import the chain certificate in the server but have had no success.Please tell me what Iu2019m missing. Thanks in advance./Greg

    DB:2.61:Ssl/Entrust Intermedate Certificate Issue dm

    take a look at this post. Installing Verisign SSL Certificate on NW 700 Java system

  • RELEVANCY SCORE 2.61

    DB:2.61:Installing A Wildcard Certificate In Strust cf



    Hi,

    I am trying to install a wildcard SSL certificate using STRUST on our ABAP system.

    If I try to import it using the "Import Cert. Response" button, I get an error message saying the certificate cannot be installed. I presume this is because my private key does not match the public key of the certificate.

    How can I get a wildcard certificate working with my ABAP system? Do I need to somehow change the private key of my system?

    Thanks in advance

    DB:2.61:Installing A Wildcard Certificate In Strust cf


    Hi Stuart,

    Please check below thread it may help in your case.

    Problem importing a certificate using Strust

    https://scn.sap.com/thread/1587251

    BR

    Atul

  • RELEVANCY SCORE 2.61

    DB:2.61:Cannot Download Itunes 1z


    I keep gettting an error message when trying to download itunes.

    DB:2.61:Cannot Download Itunes 1z

    I keep gettting an error message when trying to download itunes.

  • RELEVANCY SCORE 2.60

    DB:2.60:Getting C:\Program Files (X86) Errors m7



    I am gettting c:\program files (x86) landesk\managementsuite\resources\tools\bmps\tools1\bmp error when I launch the management suite.

    Any help

    DB:2.60:Getting C:\Program Files (X86) Errors m7


    I'm assuming you are using 9.X. Is this a remote console or the core? you should have 84 bitmaps in that folder for 9.

    You can review the following article on troubleshooting console issues.

    http://community.landesk.com/support/docs/DOC-10876

    http://community.landesk.com/support/docs/DOC-9940 Post your console log file.

    Hmm if that is the exact path c:\program files (x86) landesk\managementsuite\resources\tools\bmps\tools1\bmp it is wrong and should be C:\Program Files (x86)\LANDesk\ManagementSuite\resources\tools\bmps.

  • RELEVANCY SCORE 2.60

    DB:2.60:Smartphone Activesync Certificate Error am


    When we setup sync of a smartphone using Activesync we get the following on the phone: The certificate from name of organization for account email account' could not be verified.
    When examining certificate on phone it indicates: Secure.Nameoforganization This is not our certificate as we setup a wildcard certificate at GoDaddy on the server properly. When we click ok on the error everything works properly so just trying
    to figure out why its not getting our registering our regular certificate. Note we are not transferring/registering the certificate on the phone.
    Thanks,

    DB:2.60:Smartphone Activesync Certificate Error am

    We have the same thing happen here... works fine, but not working as intended. All iPhone here.

  • RELEVANCY SCORE 2.60

    DB:2.60:Tls Encryption ff


    I am trying to set up TLS between two Exchange Server organizations.  It looks as though every thing is configured correctly except when sniffing the packets I get a Response: 504 Need to authenticate first error.  Everything I can find on this refers to something being wrong with the certificate.  This certificate that was generated has All Purposes enabled.  Could this possibly be the problem?  So I only need to enable Server Authentication and Secure Email purposes on the certificate?  Our current certificate only has Server Authentication enabled so would having all these extra purposes be what is causing this error or is their something else I may look out for?  Any help is appreciated.  Thank you.

    DB:2.60:Tls Encryption ff

    have you checked this ? http://support.microsoft.com/kb/843106
    rgds,
    Jiri

  • RELEVANCY SCORE 2.60

    DB:2.60:Upgrade ak


    I"m gettting an error when trying to upgrade iso 6. Anyone else with this problem. HOw did you fix it. thanks.

    DB:2.60:Upgrade ak

    Well it's saying error, Upgrade failed. Been trying since yesterday with it. I'm ready to give up on it.

  • RELEVANCY SCORE 2.60

    DB:2.60:Call Getbom() From Jsp j7


    AllIs it possible to call getBOM() from jsp and not from action // gettting custom BOM Z_CustomBusinessObjectManager myBOM = (Z_CustomBusinessObjectManager)userSessionData. getBOM(Z_CustomBusinessObjectManager.CUSTOM_BOM);getting run time error when I call from jspMurali

    DB:2.60:Call Getbom() From Jsp j7

    Hi, Yes you still instantiate from a jsp. But this is not a recommended way to call a FM or bom from a jsp.Try to follow the right way to call i.e. from a Java class.Regards,Sateesh Chandra

  • RELEVANCY SCORE 2.60

    DB:2.60:Keep Gettting Response That The Exetender Player Is Not Working fj


    When I login and begin to use my computer the following response keeps popping up and wont let me go any further:
    "EXETender {layer has stopped working. A problemcaused theprogram to stop working correctly. Windows will close the program and notify you if a solution is available."

    DB:2.60:Keep Gettting Response That The Exetender Player Is Not Working fj

    I can't locate EXETender Player in Programs in order to uninstall it.

  • RELEVANCY SCORE 2.60

    DB:2.60:Error Renewing Ssl Certificate In Iis 8 - Failed To Remove The Certificate x7


    I am trying to renew a SSL certificate for my server which is running Windows Server 2012 and IIS 8. I have generated a certificate request and received my certificate back from the certificate authority. When I try to complete the certificate
    request I receive the error message failed to remove the certificate. I have searched around and so far I have been unable to find out what this error means or how to fix it. Any suggestions?

    DB:2.60:Error Renewing Ssl Certificate In Iis 8 - Failed To Remove The Certificate x7

    Just to follow up on this problem, I followed the steps at the link below to repair the private key for the SSL certificate. I was then able to export the certificate from my personal certificate store and import it into IIS 8 and that fixed the problem.
    http://www.entrust.net/knowledge-base/technote.cfm?tn=7905

  • RELEVANCY SCORE 2.60

    DB:2.60:Win7 Ie8 Printing Error xj


    When trying to print from IE8 in Windows 7, I'm gettting the following error dialog

    "An error has occurred in the script on this page"
    Line: 291
    Char: 1
    Error: ClassFactory cannot supply requested class
    Code: 0
    URL: res://ieframe.dll/preview.js

    Any ideas?

    DB:2.60:Win7 Ie8 Printing Error xj

    Yes, running Internet Explorer as administrator does work but it is a program frequently used and hence is a bind to have to keep right clicking it. To permanently set a program to run in administrator mode do the following : -

    1. right click the shortcut
    2. select properties
    3. on the 'shortcut' tab, select 'advanced'
    4. tick the box, 'run as administrator'
    5. select 'OK'
    6. back in the shortcut window, select 'apply'

    .... and there you have it. Every time you click the shortcut, IE will start in administrator mode. Of course, if you have more than one shortcut you will need to repeat the above procedure for each one.

  • RELEVANCY SCORE 2.60

    DB:2.60:Error When Trying To Import The Csr Response From Verisign For The Private cd


    Hi all, We have bought the Verisign Certificate for SSL.The following Error is coming when trying to import the CSR response from Verisign for the private. E: ID21181: ID21113: iaik.asn1.CodingException: No ASN.1 AlgorithmID Type!. I have deployed the sda files in SDM got when I extracted the CAR file 011000358700005230472003E. Did anyone the faced the same problem and solved it,please help me. Thanks in advance.Ponnusamy P.

    DB:2.60:Error When Trying To Import The Csr Response From Verisign For The Private cd

    problem solved.Solution:1) Right click on certresponse.crt2) Rename to certresponse.p7r3) Right Click on certresponse.p7r - Open4) Select the file with your domain name5) Right Click - All Tasks - Export6) Then import this in to the J2EE Key Store

  • RELEVANCY SCORE 2.59

    DB:2.59:Mpns Certificate Mismatch When Trying To Use New Wildcard Certificate pc


    I have a published app using certificate with CN=messageservice.xxxx.com
    I am trying to update my app to use a wildcard certificate CN=*.xxxx.com
    This is flagged as 'error'.
    Is this the designbehavior ?

    Frank

    DB:2.59:Mpns Certificate Mismatch When Trying To Use New Wildcard Certificate pc

    Wild-card certificate is not supported for Push Notification.
    The push service name used to create the channel must match exactly the certificate Subjects common name (CN).
    -Eric.

  • RELEVANCY SCORE 2.59

    DB:2.59:Thread: Verisign Certificate 73


    I\'ve downloaded and installed a VeriSign certificate in ConsoleOne.

    However, when trying to validate the certificate, I get an error saying

    Cannot Read Certificate Revocation List. VeriSign isn\'t being much help.

    Thanks in advance.

    DB:2.59:Thread: Verisign Certificate 73

    On Tue, 05 Jun 2007 15:08:14 GMT, David Calhoun dcalhoun @@

    clinton.k12.ms.us wrote:

    On Tue, 29 May 2007 21:06:25 GMT, Michael.Haack@premierbankcard.com

    (Michael Haack) wrote:

    I\'ve downloaded and installed a VeriSign certificate in ConsoleOne.

    However, when trying to validate the certificate, I get an error saying

    Cannot Read Certificate Revocation List. VeriSign isn\'t being much help.

    For whatever it\'s worth, my Geotrust certificates also fail

    verification with the same error but work just fine. I treat it as a

    cosmitic error. Are yours working?

    IIRC, I had the same error with Digicert Certificates. But everything

    works fine here. I wouldn\'t worry about it unless your certs don\'t

    work.

    Regards,

    Ken

    Novell....it does a server good!

  • RELEVANCY SCORE 2.59

    DB:2.59:Processing Error In Icm When Receiving Response From Webservice pj



    Hi!

    I have configured a scenario which involves consuming a web service over HTTPS.

    When trying to test the proxy I get the error: bSRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR/b.

    I have looked for solutions in here, but so far no luck. A lot of similar errors but they are all related to SM59 connection, which is fine in my case.

    Looks like it has something to do with my certificate (imported from the web service), but I am not able to figure out what it is...

    dev_icm says:

    [Thr 5596] Thu May 03 15:39:47 2007
    [Thr 5596] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL
    [Thr 5596] session uses PSE file "C:SAPNSPDVEBMGS00secSAPSSLS.pse"
    [Thr 5596] SecudeSSL_SessionStart: SSL_connect() failed --
    secude_error 9 (0x00000009) = "the verification of the server's certificate chain failed"
    [Thr 5596] ---------- Begin of Secude-SSL Errorstack ----------
    [Thr 5596] ERROR in ssl3_get_server_certificate: (9/0x0009) the verification of the server's certificate chain failed

    ERROR in af_verify_Certificates: (27/0x001b) Chain of certificates is incomplete : "OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US"

    ERROR in get_path: (27/0x001b) Found root certificate of OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US which does not fit the given PKRoot

    ERROR in verify_with_PKs: (27/0x001b) Found root certificate of OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US which does not fit the given PKRoot

    [Thr 5596] ---------- End of Secude-SSL Errorstack ----------
    [Thr 5596] SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"
    [Thr 5596] SSL socket: local=192.168.17.106:2950 peer=153.110.169.1:443
    [Thr 5596] - ERROR: SapSSLSessionStart(sssl_hdl=02946F48)==SSSLERR_SSL_CONNECT
    [Thr 5596] *** ERROR = IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT {00010007} [icxxconn.c 2005]

    DB:2.59:Processing Error In Icm When Receiving Response From Webservice pj


    Thanks, I deleted two created but unused PSEs and reloaded the CERTs in the correct PSE and it worked perfectly.

    Thank you very much.

    Also the aswer will be on this post for the next guy with the same problem :P

    Regards.

    Mariano Billinghurst.

  • RELEVANCY SCORE 2.59

    DB:2.59:Peer Certificate Rejected By Chainverifier Error With Receiver Soap Adapter xk



    Hi Experts,

    Peer certificate rejected by ChainVerifier error with receiver soap adapterwhile testing the scenario, we have used https webservice link forsecure communication.

    https://test.lms.e2train.com/UUPLC/LMS/LMS_WebService/Webservice.asmx?wsdlis the link we have used receiver side.

    in order to resolve Peer certificate rejected by ChainVerifier issue,we have also applied the sap note sapnote_0001577913, but still weare gettting same error. please advise the solution for this error--. we do not have any client certificate at webserver side.

    we are getting the above mentioned error in SAP PI 7.3

    Thanks and Regards,

    Krushi.

    DB:2.59:Peer Certificate Rejected By Chainverifier Error With Receiver Soap Adapter xk

    Ensure SSL is enabled on the Java ServerDoes the SOAP URL you are hitting have a Self Signed Certificate or a Trusted Certificate? If self signed, ensure that the same is loaded into the Trusted CAs of your Server.If the Cert is a Tusted Certificate, ensure that the Certificate Authorithys Cert ( Intermediate and Root ) are loaded into the TustedCAs in the Keystore.
    Regards,

    Bhavesh

  • RELEVANCY SCORE 2.59

    DB:2.59:Error Trying To Search For Bc- Infocube ca



    Hello Experts,

    I am using a training system and when I try to search for CO-OM-CCA(sap BC) in the Metadata Repository, but I am gettting an error 'RFC Connetction to TREX engine is Null; Searching or indexing is not possible. Any Idea on what this error means

    Thanks

    Niraj

    DB:2.59:Error Trying To Search For Bc- Infocube ca


    I cant find RSOADMIN 'TransactionRSOADMIN does not exist" I am searchingv from SAP Easy Access, and also /orsoadmin in DWWB(rsa1)

    I am unable to login into the ECC system, when i try to login it says waiting for response

    Please advise

    Niraj

  • RELEVANCY SCORE 2.59

    DB:2.59:I Cloud Issues jk


    Keep getting invalid certificate error when trying to enter password for Icloud.

    DB:2.59:I Cloud Issues jk

    Keep getting invalid certificate error when trying to enter password for Icloud.

  • RELEVANCY SCORE 2.59

    DB:2.59:Error Renewing Ssl Certificate In Iis 8 - Failed To Remove The Certificate c1


    I am trying to renew a SSL certificate for my server which is running Windows Server 2012 and IIS 8. I have generated a certificate request and received my certificate back from the certificate authority. When I try to complete the certificate
    request I receive the error message failed to remove the certificate. I have searched around and so far I have been unable to find out what this error means or
    how to fix it. Any suggestions?

    DB:2.59:Error Renewing Ssl Certificate In Iis 8 - Failed To Remove The Certificate c1

    Just to follow up on this problem, I followed the steps at the link below to repair the private key for the SSL certificate. I was then able to export the certificate from my personal certificate store and import it into IIS 8 and that fixed the problem.
    http://www.entrust.net/knowledge-base/technote.cfm?tn=7905

  • RELEVANCY SCORE 2.58

    DB:2.58:Ssl Setup For B2b xm


    Hi All,

    Iam trying to setup SSL between 2 B2B servers namely Acme and GlobalChips. I referred the blog http://www.b2bgurus.com/2007/08/oracle-as-b2b-security-how-to.html. In brief I did the following things -

    1. Create a new wallet with OWM (Oracle Wallet Manager).
    2. Generate a certificate request from wallet manager for the host Acme.
    3. Sign this certificate request from OCA (Oracle Certificate Authority).
    4. Import the approved certificate in the wallet. The wallet now contains the ready certificate of host Acme.
    5. Import the CA certificate. Wallet now contains the host certificate and CA root certificate. Also import the remote trading partners certificate. Wallet now has host,CA and remote trading partners certificate.
    6. Export the wallet and save it as wallet.txt.
    6. Update the tip.properties for wallet location to c:/mycertificates/mywallet/wallet.txt. Also update opmn.xml for ssl-enabled.
    7. Create the wallet password in host trading partner.
    8. Create the delivery channel for host and remote trading partners with transport security enabled.
    9. Create the agreement with working collaboration and secured delivery channels and deploy it.

    Now when Iam testing these collaboration, the Acme server gives the following error -

    Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :javax.net.ssl.SSLException: Private key set to ssl context failed.

    javax.net.ssl.SSLException: Private key set to ssl context failed

    I find no clue from this error. please help.

    DB:2.58:Ssl Setup For B2b xm

    Thanks for the reply.

    I tried what you said, copied the wallet to location $oracle_HOME/Apache/Apache/conf/ssl.wlt/default, saved it as wallet.txt and updated tip.properties for the path "D:\\OraHome\\Apache\\Apache\\conf\\ssl.wlt\\default/wallet.txt".

    But this has no effect... the error is same as previous.

    One more thing that I did is uncommented the transport logs in tip.properties.
    oracle.tip.adapter.b2b.transportTrace = D:\\OraHome\\ip\\log/transport.trc

    The file transport.trc has following contents -

    -------------------------------------------------------------------------------------------------------------
    TransportProperties.TransportProperties():http.receiver.registry_port=5110;port=4444;smtp.receiver.protocol=imap;PROTOCOL_ENDPOINT=null;http.receiver.instance_name=IP;
    [IPT_HttpRecRegisterBegin] HTTPReceiver.init(): Registering HTTP Receiver ...
    RMIResponsePort = null
    low port = 5110
    high port = 5110
    Started Receiver at rmi port 5110.
    [IPT_HttpRecRegisterCompleted] HTTPReceiver.init(): Completed registering HTTP Receiver.
    TransportProperties.TransportProperties():http.sender.wallet_location=D:\OraHome\Apache\Apache\conf\ssl.wlt\default/wallet.txt;http.sender.wallet_password=******;
    TransportProperties.TransportProperties():http.sender.port=4444;http.sender.proto=https;http.sender.host=b2bsoa;http.sender.path=/b2b/transportServlet;http.sender.wallet_location=D:\OraHome\Apache\Apache\conf\ssl.wlt\default/wallet.txt;http.sender.wallet_password=******;
    [IPT_HttpSendWalletInfo] HTTP Sender uses wallet from D:\OraHome\Apache\Apache\conf\ssl.wlt\default/wallet.txt with password ?v??s?-.
    Basic authentication is not used due to one of security parameters not set. Make sure username, password, and realm are set in delivery channel.
    Number of headers to be added is 3
    [IPT_HttpSendHttpResponseError] HTTP response error :{0}.

    java.io.IOException: javax.net.ssl.SSLException: Private key set to ssl context failed
    at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
    at HTTPClient.OracleSSL.getSSLSocket(OracleSSL.java:267)
    ------------------------------------------------------------------------------------------------------------

    Looking at this I think the error occured while starting the handshaking process. Does this mean that the certificate that were generated are invalid ???

    Edited by: user567514 on Oct 10, 2008 4:38 AM

  • RELEVANCY SCORE 2.58

    DB:2.58:Pix Gets No Ca Root Certificate From Ms Ca Server k3



    I am trying to get a PIX running 6.3.3 to request a certificate from a Win2K server running certificate services. The server is running as a stand-alone root CA.

    The PIX config's for the CA access are:

    name 172.10.224.5 ca.lab1b972.com

    ca identity ca.lab1b972.com 172.10.224.5:/cgi-bin

    ca configure ca.lab1b972.com ca 1 20 crloptional

    I've created a set of general purpose RSA keys. When I issue the ca authen ca.lab1b972.com, I get a response with the fingerprint of the CA server. If I issue the command with the fingerprint, it confirms the fingerprint just fine. When I issue the enroll command, however, I get an error that reads:

    "No CA Root certificate found. Use CA authenticate." I'm absolutely stuck - can anyone suggest possible methods to move forward?

    DB:2.58:Pix Gets No Ca Root Certificate From Ms Ca Server k3


    There are a number of things that you could look into:

    1) Domain name should be the same on PIX and CA server.

    2) Make sure that the old certificates have been cleared

    3) The 'isakmp identity hostname' command has been configured on the PIX

    4) System clocks should be in synch

  • RELEVANCY SCORE 2.58

    DB:2.58:Vs2010 Express Error When Trying To Recompile fs


    I am gettting this error when pressing CTRL-F5:
    ---------------------------------------------------------------------------------------------------------------
    Error1Unable to copy file obj\x86\Release\Simpson1.exe to J:\Microsoft Visual Studio 10.0\Projects\Simpson1\Bin\Simpson1.exe. The process cannot access the file 'J:\Microsoft Visual Studio 10.0\Projects\Simpson1\Bin\Simpson1.exe' because
    it is being used by another process.Simpson1
    ---------------------------------------------------------------------------------------------------------------
    Any Hint?

    DB:2.58:Vs2010 Express Error When Trying To Recompile fs

    That's more like it, except that restarting VS doesn't help .... I have to restart the whole system

    Bye

    Andrea

  • RELEVANCY SCORE 2.58

    DB:2.58:Error Invalid Certificate When Trying To Access Internet. fs


    Original Title: invalid certficate XP 2001
    New computer in shop, so using old 2001 XP. Can get internet, but INVALID CERTIFICATE sign keeps popping up. What should I do?

    DB:2.58:Error Invalid Certificate When Trying To Access Internet. fs

    Two conditions that can cause this. One is that you computer isset to the wrong date and/or time. Verify that your correct time zone is set on your computer and that the date / time is within about 5 minutes of the correct time.

    Second, you may have old certificates that need to be updated. Go to the following website:
    " Windows Root Certificate Program Members"
    http://support.microsoft.com/kb/931125

    and click on the link in the paragraph "Root Update Package (intended for Windows XP only)". After downloading the update, double-click on it to install.

    HTH,
    JW

  • RELEVANCY SCORE 2.58

    DB:2.58:I Cant Defrag. Gettting Access Denied. m9


    I am getting an error when I try to Defrag. I get C:\WINDOWS\system32\dfrag.msc Access in Denied. Can you please help?

    DB:2.58:I Cant Defrag. Gettting Access Denied. m9

    I am getting an error when I try to Defrag. I get C:\WINDOWS\system32\dfrag.msc Access in Denied. Can you please help?

  • RELEVANCY SCORE 2.58

    DB:2.58:Failed To Retrieve Directory Listing x7





    Hi,

    Initially I was able to connect via FTP. Then all of a sudden I started getting 550 SSL/TLS required on the control channel. Why did it suddenly required SSL/TLS when I did not do anything extra?

    Now when Im trying to connect via FTPES using FileZilla (tried both active and passive) on Linux Mint Debian, Im getting the error below. Im really stumped. I have tried to Allow incoming from all on port 49152-65534/tcp via Plesk firewall, but still no go.

    The worst thing now is, I cant even get FTP to work anymore. Of course I would prefer to have TLS working. Any ideas?

    Status: Connection established, waiting for welcome message...
    Response: 220 ProFTPD 1.3.5 Server (ProFTPD) [206.106.213.243]
    Command: AUTH TLS
    Response: 234 AUTH TLS successful
    Status: Initializing TLS...
    Status: Verifying certificate...
    Command: USER jbob
    Status: TLS/SSL connection established.
    Response: 331 Password required for jbob
    Command: PASS *************
    Response: 230 User jbob logged in
    Command: OPTS UTF8 ON
    Response: 200 UTF8 set to on
    Command: PBSZ 0
    Response: 200 PBSZ 0 successful
    Command: PROT P
    Response: 200 Protection set to Private
    Status: Connected
    Status: Retrieving directory listing...
    Command: PWD
    Response: 257 / is the current directory
    Command: TYPE I
    Response: 200 Type set to I
    Command: PORT 192,168,0,103,159,241
    Response: 200 PORT command successful
    Command: MLSD
    Error: Connection timed out
    Error: Failed to retrieve directory listing

    DB:2.58:Failed To Retrieve Directory Listing x7




    I figured it out.

    In /etc/proftpd.conf I added the following line:

    # Use the IANA registered ephemeral port range
    PassivePorts start-port end-port

    Example:
    # Use the IANA registered ephemeral port range
    PassivePorts 20000 25000

    Then in Plesk Firwall I created a custom rule with the above port range.

    In FileZilla I used Passive mode.

  • RELEVANCY SCORE 2.58

    DB:2.58:Gettting A 700 305 0 Error When Trying To Watch Online z3



    Cant seem to solve this...help!!

  • RELEVANCY SCORE 2.57

    DB:2.57:Newly Downloaded jp


    I have just downloaded J2SE JRE in order to be able to use downloaded tables from the Government of Canada. I am having a problem when trying to install the tables. I keep gettting an error message and I don't know if the problem is with Java or the tables. Can anyone help?

    DB:2.57:Newly Downloaded jp

    The most likely tables are the ones you use to calculate government payroll deductions (tax, Canada Pension Plan etc). But I haven't worked with payroll since those tables were only on paper so I have no idea what the Java connection is.

  • RELEVANCY SCORE 2.57

    DB:2.57:Unable To Upload Signed Certificate zp



    I'm trying to upload a certificate that I've had signed by an external CA into CUPS (9.1). When I upload the certificate, I get back the unhelpful message "Error reading the certificate"

     

    I've had a look at the RTMT OS Admin Web Service logs, and that just gives a meaningless Java stacktrace and the same error.

     

    Any suggestions as to how to troubleshoot this?

     

    Thanks,

     

    GTG

    DB:2.57:Unable To Upload Signed Certificate zp


    Hi Gordon,

    Have you uploaded the Root CA certs to the tomcat-trust? Also, is the cert in PEM format (Base 64)?

    Please rate useful posts.

  • RELEVANCY SCORE 2.57

    DB:2.57:Sony Ericsson Satio - Getting 'Certificate Error' When Trying To Install Software 3x


    Hi,

    I keep getting a certificate error message when I try to install software? does anyone else have this problem? and know how to fix it? I have tried to install python 1.9.7 but that gets the certificate error message aswell my settings are to allow all certificates any help appreciated.

    Robert.

    DB:2.57:Sony Ericsson Satio - Getting 'Certificate Error' When Trying To Install Software 3x

    It only tends to come about if you try to install old themes, software or you haven't had the software signed for your mobile phone using a valid certificate.

    If its the case for old themes, just put your phone's date back a year or two



    ----------------------------------------------------------------------------------------------------------Mobile: Samsung Galaxy S3If I have helped you in any way then please click on the star on the left ^_^ Thank you!

  • RELEVANCY SCORE 2.57

    DB:2.57:Transfer Structure Is Not Yet Active mz



    Hi Experts,

    Am getting error " Transfer structure is not yet active" when am trying to trigger the IP.

    I tried activating it using program "RS_TRANSTRU_ACTIVATE_ALL"

    But still gettting same error.

    Kindly suggest how to avoid this error.

    Best Regards,

    Krishna.

    DB:2.57:Transfer Structure Is Not Yet Active mz


    Hi Krishna,

    I am wondering in which system you have the problem. For now I assume that it's not Development and that you have transported objects.

    First check if the DataSource works in the source system (t/code RSA3). If it does not work, then try to solve this first.

    It could be that there is a mismatch between replicated DataSource and Transfer Structure. I suggest to execute the following steps (by creating new transports and exactly in this sequence):
    Transport the DataSource in the source system;Replicate the DataSource in BW;Transport the Transfer Structure/ Transfer Rules;Transport the InfoPackage (if necessary).

    Best regards,

    Sander

  • RELEVANCY SCORE 2.57

    DB:2.57:Cisco Asa And Anyconnect Vpn Certificate Error xp



    Hi,

    I'm trying to configure Cisco AnyConnect VPN and everything works but I'm getting this warning message when opening the connection:

    I don't have public certificate in ASA. Is there any possibility to use self-signed certificate and get rid of this warning message?

    DB:2.57:Cisco Asa And Anyconnect Vpn Certificate Error xp


    Hi,

    This is expected behavior on the ASA for SSL connection .You can surely use the self signed certificate on the ASA and then apply it on the outside interface.Once done , you will need to install that certificate on the clients and this will alleviate the error popup message.

    Here is a document that you can refer to create self-signed certificate.https://supportforums.cisco.com/document/44116/asa-self-signed-certificate-webvpn

    Regards,Dinesh Moudgil

    P.S. Please rate the helpful posts. 

  • RELEVANCY SCORE 2.57

    DB:2.57:Since Latest Update, My Bookmarked Site Fails With Certificate Key Usage Inadequate, Why? (It Works Fine In Windows Explorer)Explorer a9



    This worked the day before I got the "Gettting Started" screen when I started the browser and still works for co-workers who have not gotten the new version of Mozilla firefox.

    DB:2.57:Since Latest Update, My Bookmarked Site Fails With Certificate Key Usage Inadequate, Why? (It Works Fine In Windows Explorer)Explorer a9



    That could be a problem with the usage of libPKIX in the Firefox 31 and later releases.

    https://blog.mozilla.org/security/2014/04/24/exciting-updates-to-certificate-verification-in-gecko/

    It is possible to disable this new feature by disabling libPKIX support, but this is not recommended for security and vulnerability reasons.

    about:config page: security.use_mozillapkix_verification = false

  • RELEVANCY SCORE 2.57

    DB:2.57:Ssl Configuration - Error While Importing Csr Response x7



    Hi,

    We are trying to configure SSL Server Test Certificate in our J2EE system through Visual Admin.

    However while doing so we get below error ....

    The private key entry doesn't match the given CSR response file!

    Signature decryption error:javax.crypto.BadPaddingException:Invalid PKCS#1 padding:no leading zero!

    I can view the downloaded certificate that ensures that the certificate is not currupted. I can view the Private Key but stuck without the Public Key.

    Appreciate your help for resolution of the error.

    Thanks,

    With Regards,

    SARANG

    DB:2.57:Ssl Configuration - Error While Importing Csr Response x7


    Hi Sarang,

    We are facing the saame error. How did you resolve this problem?

    Regards,

    Rehan

  • RELEVANCY SCORE 2.57

    DB:2.57:Webview 8 Security Certificate Error: Not Issued By A Trusted Certificate Authority 1f



    Hi, all. We have webview 8 and we enabled SSL. When accessing the login page it gives the error as below:

    "The security certificate presented by this website was not issued by a trusted certificate authority."

    If I access the page from the server itself then I will not have the error. Any external computers will show this error when trying to access the login page.

    I also checked the IIS admin for the certificate. It's valid but the certificate path only has the server name there.  Does it mean it's self signed certificate? I'm really not familiar with security certificate. The customer's policy is not to allow access to a secure web site with untrusted certificate. So I cannot just ignore this error.

    Thanks.

    DB:2.57:Webview 8 Security Certificate Error: Not Issued By A Trusted Certificate Authority 1f


    Thanks. We cannot disable it because of the security policy. They won't have unencrypted user information travel over network. However the customer has accepted installing the certificate on client workstation so now we're good.

  • RELEVANCY SCORE 2.56

    DB:2.56:Httpclient And Multiple Certificates sa


    I am trying to access the Azure Service Management API which requires management certificate for authentication. I am able to implement it for a single subscription by installing the certificate on the phone and then attaching to HttpProtocolBaseFilter object.
    But I get 403 Forbidden error when I try to do it for another subscription. The certificate is installed for multiple subscriptions, so I don't know why I'm getting the error.
    Here is my code:

    public async TaskCertificate GetCertificate()
    {
    await CertificateEnrollmentManager.ImportPfxDataAsync(Certificate, , ExportOption.Exportable, KeyProtectionLevel.NoConsent, InstallOptions.None, SubscriptionID);
    CertificateQuery query = new CertificateQuery();
    query.FriendlyName = SubscriptionID;
    var c = await CertificateStores.FindAllAsync(query);
    return c[0];
    }
    public async TaskHttpResponseMessage SendRequest(string url,string version)
    {
    HttpResponseMessage response = null;
    try
    {
    HttpBaseProtocolFilter filter = new HttpBaseProtocolFilter();
    filter.ClientCertificate = await GetCertificate();
    using (HttpClient client = new HttpClient(filter))
    {
    HttpRequestMessage request = new HttpRequestMessage();
    request.RequestUri = new Uri(url);
    request.Headers.Add(x-ms-version, version);
    response = await client.SendRequestAsync(request, 0);
    }
    return response;
    }
    catch(Exception e)
    {
    var status=Windows.Web.WebError.GetStatus(e.HResult);
    if (status == WebErrorStatus.CannotConnect)
    throw new Exception(Cannot connect to internet. Check your connection.);
    else if (status == WebErrorStatus.Disconnected)
    throw new Exception(Connection was disconnected.);
    else if (status == WebErrorStatus.ServiceUnavailable)
    throw new Exception(Server was unavailable);
    else if (status == WebErrorStatus.ConnectionReset)
    throw new Exception(Connection was reset.);
    else if (status == WebErrorStatus.BadGateway)
    throw new Exception(Bad gateway.);
    else if (status == WebErrorStatus.InternalServerError)
    throw new Exception(Internal server error occurred);
    else if (status == WebErrorStatus.HostNameNotResolved)
    throw new Exception(Check your network connection. Host name could not be resolved.);
    }
    return response;

    }

    DB:2.56:Httpclient And Multiple Certificates sa

    I can't remove the certificate because it is installed in the MY store and it is not accessible in Windows Phone. I have debugged the code and I am able to retrieve the correct certificate but I still get the 403 forbidden error. Basically, the latest
    subscription that I add works, but not the previous one.

  • RELEVANCY SCORE 2.56

    DB:2.56:Ikev2 Ipsec Vpn Certificate Error pk


    We have deployed a Strongswan based IPSec VPN on our premises that uses Certificate authentication. It works great with all OSs except from Windows. When trying to connect to the VPN we get Error 798: A certificate..... The user certificate contains the
    Client Authentication EKU and under SAN it has a UPN field.

    I have attached my certificate (public part only)
    it's at rghost id 56905698

  • RELEVANCY SCORE 2.56

    DB:2.56:Ftpwebrequest Ssl sd


    Hi,    I'm trying to do FTP over SSL (Explicit). When i try to access the Response like this                   response = (FtpWebResponse)request.GetResponse();I'm getting the error  Remote certificate was verified as invalid by the user. I'm able to login to the same ftp server list the directory without using the SSL but when I use SSL i'm getting the error. I'm adding part of the tracing log file containing the error. Can anyone tell me how to fix the error? ThanksMohanSystem.Net Information: 0 : [2512] SecureChannel#50510248 - Remote certificate has errors:System.Net Information: 0 : [2512] SecureChannel#50510248 -     A certificate chain processed correctly, but terminated in a root certificate which is not trusted by the trust provider.System.Net Information: 0 : [2512] SecureChannel#50510248 - Remote certificate was verified as invalid by the user.System.Net.Sockets Verbose: 0 : [2512] Socket#7588182::Dispose()System.Net Information: 0 : [2512] FtpWebRequest#32977404::(Releasing FTP connection#5923895.)System.Net Error: 0 : [2512] Exception in the FtpWebRequest#32977404::GetResponse - The remote certificate is invalid according to the validation procedure.System.Net Error: 0 : [2512]    at System.Net.FtpWebRequest.SyncRequestCallback(Object obj)   at System.Net.FtpWebRequest.RequestCallback(Object obj)   at System.Net.CommandStream.Abort(Exception e)   at System.Net.FtpWebRequest.FinishRequestStage(RequestStage stage)   at System.Net.FtpWebRequest.GetResponse()System.Net Verbose: 0 : [2512] Exiting FtpWebRequest#32977404::GetResponse()

    DB:2.56:Ftpwebrequest Ssl sd

    Thanks Durgaprasad....I now know how to add the Trusted Root Cert Authorities from the Certificate though i didnt actually add it test it...

  • RELEVANCY SCORE 2.56

    DB:2.56:Thread: Import Of Certificate Failed Error f8


    Hi,

    I am trying to setup the user source using LDAP SSL but I kept getting

    Import of Certificate Failed error when trying to import the certificate.

    I have tried a different LDAP server but got the same error message.

    I have no problem if I don\'t use SSL (port 389).

    Any ideas?

    thanks

    DB:2.56:Thread: Import Of Certificate Failed Error f8

    JS,

    It appears that in the past few days you have not received a response to your

    posting. That concerns us, and has triggered this automated reply.

    Has your problem been resolved? If not, you might try one of the following options:

    - Visit http://support.novell.com and search the knowledgebase and/or check all

    the other self support options and support programs available.

    - You could also try posting your message again. Make sure it is posted in the

    correct newsgroup. (http://support.novell.com/forums)

    Be sure to read the forum FAQ about what to expect in the way of responses:

    http://support.novell.com/forums/faq_general.html

    If this is a reply to a duplicate posting, please ignore and accept our apologies

    and rest assured we will issue a stern reprimand to our posting bot.

    Good luck!

    Your Novell Product Support Forums Team

    http://support.novell.com/forums/

  • RELEVANCY SCORE 2.56

    DB:2.56:Adfs And Certificate Problems sd


    I am trying to configure ADFS but have hit this strange problem. I ran through the ADFS setup wizard and used a wildcard certificate as my certificate. However, after it completes and I try to browse to the metadata (https://adfs.domain.com/federationmetadata/2007-06/federationmetadata.xml)
    I get a certificate mismatch error. When I choose to view the certificate, it says it's using the local machine certificate.
    I've checked IIS and the SSL binding uses the wildcard certificate. How and why is ADFS ending up with the machine certificate?

    DB:2.56:Adfs And Certificate Problems sd


    You can use Powershell on the AD FS 2.0 server to look at your certificate settings via GET-ADFSCertificate. If you want to set the bindings on the service communication certificate, you can use:
    SET-ADCFS -CertificateType Service-Communications -Thumbprint xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
    Regards,
    Mylo

    Well the answer is not exactly correct. The Syntax is wrong. It should be.

    Set-ADFSCertificate-CertificateType Service-Communications -Thumbprint xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  • RELEVANCY SCORE 2.56

    DB:2.56:Crl From Https jd


    Hi All,

    currently i m trying to get crl certificate from repositary of different provider.
    When i m trying with "HTTP" it works fine bt when i m trying to get crl certificate
    from HTTPS it showed me error of no certificate found.
    How to resolve this problm???

    Thanks in Advance.

    DB:2.56:Crl From Https jd

    See the Javadoc/Guide to Features/Security/JSSE Reference Guide.

    You can't use SSL without knowing something about it, and this is the place to start.

  • RELEVANCY SCORE 2.56

    DB:2.56:Sslvpn Certificate Will Not Import am



    I have a Cisco 2800 ISR. We have sslvpn setup. Trying to get a valid ca certificate and router certificate installed. Using MS CA on windows 2000.

    I get this error when I try to import they certificates.

    =========================================

    Certificate import has failed. The error returned is:

    Certificate is not valid, or has expired, or

    the time on your router is invalid.

    =========================================

    Time has been verified.

    DB:2.56:Sslvpn Certificate Will Not Import am


    Hi,

    Otherthan the above mentioned points,please make sure that the device timing settings are synchronized with the CA server timings.

    While downloading the certificate form the CA server, the router will do a check on the time value available on the certificate to ensure that it is not expired. If it is expited then it would not install the certificate.

    --Jaffer

  • RELEVANCY SCORE 2.55

    DB:2.55:While Coppying Getting Error "Insufficient Arguments". z7


    Hi,while trying to execute this comand,cp .Xauthority/home_sap/xipadm/i am gettting an error saying insufficient arguments.Can any one help me how to proceed.Regards,Vamsi.

    DB:2.55:While Coppying Getting Error "Insufficient Arguments". z7

    You need to give a target where you want to copy.cp source targetyou omitted the target.-- Markus

  • RELEVANCY SCORE 2.55

    DB:2.55:Gettting Error 0x80040fb3 When Syncing 8800 With Outlook 2003 18


    I get this error message and the the sync process stops with no updates applied. any ideas what the problem is and how it can be fixed? thanks

    DB:2.55:Gettting Error 0x80040fb3 When Syncing 8800 With Outlook 2003 18

    davidnestler wrote:
    is there anyway to reset the address book and caledar on the 8800 so that i can completely refresh the blackberry with outlook entries?

    thanks
    If you are not connected to a BES, then it's easily done with the Desktop Manager in the advanced options.If you are connected to a BES, there is a KB that explains how to turn off the wireless synchronization and do the same as for BIS but it didn't work for me when I tried. The other solution is to ask your BES admin to delete these two databases.



    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • RELEVANCY SCORE 2.55

    DB:2.55:Gettting Javax.Xml.Ws.Webserviceexception: Java.Io.Eofexception jd


    Hi,

    I am using jdeveloper to generate awebservice proxy for this service
    http://mktinterface.dnb.com/wsgateway/services/DNBWebServiceGateway?wsdl

    after that i am generating a java class which uses a method inside the above webservice and then exposing the java class as a webservice.
    when the overridden method in this exposed webservice is called i get the following error.

    i get the data when i use HTTP protocol but when i modify the endpoints and use HTTPS protocolo get the below error. I have included all the required certificates as well during execution.

    DNBGetResp findBusiness --------------------DB find business is called--------------------
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    DNBGetResp findBusiness --------------------DB find business just abt to call --------------------
    I have an exceptionjavax.xml.ws.WebServiceException: java.io.EOFException: Response contained no data
    not the stack trace
    javax.xml.ws.WebServiceException: java.io.EOFException: Response contained no data
    at com.sun.xml.ws.transport.http.client.HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:218)
    at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:204)
    at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:124)
    at com.sun.xml.ws.transport.DeferredTransportPipe.processRequest(DeferredTransportPipe.java:121)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
    at com.sun.xml.ws.client.Stub.process(Stub.java:272)
    at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:117)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
    at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
    at $Proxy272.findBusiness(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
    at $Proxy271.findBusiness(Unknown Source)
    at com.edf.proxy.dnb.DNBGetResp.findBusiness(DNBGetResp.java:114)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
    at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
    at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
    at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
    at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
    at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
    at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
    at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
    at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)
    at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:172)
    at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
    at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
    at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
    at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:95)
    at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: java.io.EOFException: Response contained no data
    at weblogic.net.http.MessageHeader.isHTTP(MessageHeader.java:227)
    at weblogic.net.http.MessageHeader.parseHeader(MessageHeader.java:148)
    at weblogic.net.http.HttpClient.parseHTTP(HttpClient.java:468)
    at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:377)
    at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:37)
    at weblogic.net.http.HttpURLConnection.getResponseCode(HttpURLConnection.java:965)
    at com.sun.xml.ws.transport.http.client.HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:215)
    at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:206)
    ... 77 more

    need help on this.

    DB:2.55:Gettting Javax.Xml.Ws.Webserviceexception: Java.Io.Eofexception jd

    Hi,

    I am using jdeveloper to generate awebservice proxy for this service
    http://mktinterface.dnb.com/wsgateway/services/DNBWebServiceGateway?wsdl

    after that i am generating a java class which uses a method inside the above webservice and then exposing the java class as a webservice.
    when the overridden method in this exposed webservice is called i get the following error.

    i get the data when i use HTTP protocol but when i modify the endpoints and use HTTPS protocolo get the below error. I have included all the required certificates as well during execution.

    DNBGetResp findBusiness --------------------DB find business is called--------------------
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    Jun 20, 2012 6:49:00 PM IST Notice Security BEA-090898 Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    DNBGetResp findBusiness --------------------DB find business just abt to call --------------------
    I have an exceptionjavax.xml.ws.WebServiceException: java.io.EOFException: Response contained no data
    not the stack trace
    javax.xml.ws.WebServiceException: java.io.EOFException: Response contained no data
    at com.sun.xml.ws.transport.http.client.HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:218)
    at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:204)
    at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:124)
    at com.sun.xml.ws.transport.DeferredTransportPipe.processRequest(DeferredTransportPipe.java:121)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
    at com.sun.xml.ws.client.Stub.process(Stub.java:272)
    at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:153)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:117)
    at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
    at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
    at $Proxy272.findBusiness(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
    at $Proxy271.findBusiness(Unknown Source)
    at com.edf.proxy.dnb.DNBGetResp.findBusiness(DNBGetResp.java:114)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:92)
    at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.invoke(WLSInstanceResolver.java:74)
    at com.sun.xml.ws.server.InvokerTube$2.invoke(InvokerTube.java:151)
    at com.sun.xml.ws.server.sei.EndpointMethodHandlerImpl.invoke(EndpointMethodHandlerImpl.java:268)
    at com.sun.xml.ws.server.sei.SEIInvokerTube.processRequest(SEIInvokerTube.java:100)
    at com.sun.xml.ws.api.pipe.Fiber.__doRun(Fiber.java:866)
    at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:815)
    at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:778)
    at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:680)
    at com.sun.xml.ws.server.WSEndpointImpl$2.process(WSEndpointImpl.java:403)
    at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:532)
    at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
    at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)
    at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:172)
    at weblogic.wsee.jaxws.HttpServletAdapter$AuthorizedInvoke.run(HttpServletAdapter.java:708)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
    at weblogic.wsee.jaxws.HttpServletAdapter$3.run(HttpServletAdapter.java:311)
    at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
    at weblogic.wsee.jaxws.JAXWSServlet.doRequest(JAXWSServlet.java:95)
    at weblogic.servlet.http.AbstractAsyncServlet.service(AbstractAsyncServlet.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: java.io.EOFException: Response contained no data
    at weblogic.net.http.MessageHeader.isHTTP(MessageHeader.java:227)
    at weblogic.net.http.MessageHeader.parseHeader(MessageHeader.java:148)
    at weblogic.net.http.HttpClient.parseHTTP(HttpClient.java:468)
    at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:377)
    at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConnection.java:37)
    at weblogic.net.http.HttpURLConnection.getResponseCode(HttpURLConnection.java:965)
    at com.sun.xml.ws.transport.http.client.HttpClientTransport.readResponseCodeAndMessage(HttpClientTransport.java:215)
    at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:206)
    ... 77 more

    need help on this.

  • RELEVANCY SCORE 2.55

    DB:2.55:Error Message When Trying To Enroll A Certificate dx



    When I try to install a certificate that I generated using Cisco ACS signing request (CSR) I am getting an error mesage.

    "Can not find certificate with specified common name in the ACS Storage"

    Am I missing a step I verified the name and the path of .pem file.

    Max

    DB:2.55:Error Message When Trying To Enroll A Certificate dx


    Hi

    You can get some walk through in http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/acstl_wp.htm

    This white paper is for EAP-TLS but you need section 5.2.2 - AAA Server Certificate Requirements which is the same for PEAP.

    Other than the points mentioned in this section , you have the step-by-step procedure in the previous correspodence.

    Let me know if you need more specific help

    Ami

  • RELEVANCY SCORE 2.55

    DB:2.55:About Soap Header 7x



    Hello ,

    i trying to call webservice.i got resposnse.i get saop body and its child element.but in that response i am not gettting soap header element.is there anything extra i have to do to get soap header.

    can anybody tell me ,How to get response header?

    i tryed follwing code to get response header.

    var qName:QName = new QName("http://xyz.com/");

    var soapH:SOAPHeader = ws.getHeader(qName,"SoapHeadeName");

    but this is not working.

    DB:2.55:About Soap Header 7x


    Hello ,

    i trying to call webservice.i got resposnse.i get saop body and its child element.but in that response i am not gettting soap header element.is there anything extra i have to do to get soap header.

    can anybody tell me ,How to get response header?

    i tryed follwing code to get response header.

    var qName:QName = new QName("http://xyz.com/");

    var soapH:SOAPHeader = ws.getHeader(qName,"SoapHeadeName");

    but this is not working.

  • RELEVANCY SCORE 2.55

    DB:2.55:Ssl - Certificate Creation Failed For Weblogic 8.1 71


    SSL - Certificate creation failed. We are using the weblogic 8.1.

    Getting this below error message when trying to create the certificate request using "pskeymanager.cmd -create" command
    ==============================================

    Generating private key.

    keytool error: java.io.IOException: Keystore was tampered with, or password was
    incorrect

    Certificate creation failed.

    Press any key to continue . . .
    ========================================================

    DB:2.55:Ssl - Certificate Creation Failed For Weblogic 8.1 71

    copied the file pskey from another PeopleSoft web server. And after that, was able to generate the certi request.

  • RELEVANCY SCORE 2.55

    DB:2.55:Zipexception?-Weblogic6.1-Sp2 7c



    I'm gettting the folling error on server start when it is trying to load/bind the
    EJB?
    "java.util.zip.ZipException: error in opening zip file"
    What is this Zip Exception??
    How to getrid of this.

    Thnx

    DB:2.55:Zipexception?-Weblogic6.1-Sp2 7c


    I get this behavior 10% of the time when I hot-deploy .ear.Try increase the timeout that is used to check for automatic redeployment. If
    the .ear is rather large and takes a while to copy, the timestamp is altered while
    the copy is still in progress and thus the ear can 't be unzipped by WLS for redeployment.
    We use a value of 4000msec in stead of the default 3000 and this is sufficient
    for a 7MB .ear.

    Regards,
    Merg

  • RELEVANCY SCORE 2.55

    DB:2.55:Error: Untrusted Server Certificate f1



    When i click on Query Interfaces (IPS Manager: Configuration Settings Interfaces) i get the following error:

    An error occurred trying to get the interface information. An error occurred while trying to determine the sensor version. Detail = Error occurred while communicating with 172.17.xx.xx: java.security.cert.CertificateException: Untrusted Server Certificate Chain

    Any suggestion?

    Thank you,

    DB:2.55:Error: Untrusted Server Certificate f1


    When i click on Query Interfaces (IPS Manager: Configuration Settings Interfaces) i get the following error:

    An error occurred trying to get the interface information. An error occurred while trying to determine the sensor version. Detail = Error occurred while communicating with 172.17.xx.xx: java.security.cert.CertificateException: Untrusted Server Certificate Chain

    Any suggestion?

    Thank you,

  • RELEVANCY SCORE 2.55

    DB:2.55:How To Load The Certificate Authority Into The Keystore For The Weblogic8.1 dd


    how to load the certificate authority into the keystore for the weblogic8.1
    ==================================================
    Getting the message below when trying to improt the certificate to the weblogic 8.1 web server. Received this certificate from our internal IT certificate authority. Trying to import the certificate to our test sytem.
    ===================================================
    keytool error: java.lang.Exception: Failed to establish chain from reply

    Import failed. Verify that the Certificate Authority that signed 'certi.pem'
    has been loaded into your keystore 'keystore\pskey'

    To view keystore contents issue 'PSkeymanager -list -keystore keystore\pskey [-v
    ]'
    To preview a certificate file issue 'PSkeymanager -previewfilecert -file certi.pem'

    DB:2.55:How To Load The Certificate Authority Into The Keystore For The Weblogic8.1 dd

    how to load the certificate authority into the keystore for the weblogic8.1
    ==================================================
    Getting the message below when trying to improt the certificate to the weblogic 8.1 web server. Received this certificate from our internal IT certificate authority. Trying to import the certificate to our test sytem.
    ===================================================
    keytool error: java.lang.Exception: Failed to establish chain from reply

    Import failed. Verify that the Certificate Authority that signed 'certi.pem'
    has been loaded into your keystore 'keystore\pskey'

    To view keystore contents issue 'PSkeymanager -list -keystore keystore\pskey [-v
    ]'
    To preview a certificate file issue 'PSkeymanager -previewfilecert -file certi.pem'

  • RELEVANCY SCORE 2.55

    DB:2.55:Certificate Not Found When Trying To Download Music To A Walkman jm


    original title: can't download music to my walkman. error saying certificate not found
    unable to download or import music to my walkman. message saying certificate not found

  • RELEVANCY SCORE 2.55

    DB:2.55:2147467259 0x80004005 Just Started Gettting This Error Message When Trying To Play Internet Spades Or Any Internet Games In Windows 7 - 87


    My windows 7 computer was working great - then on Dec 26 i went to play internet spades that I love ot play and it gives me that code 2147467259 (0x800004005) and i t will not let me play any internet games

    DB:2.55:2147467259 0x80004005 Just Started Gettting This Error Message When Trying To Play Internet Spades Or Any Internet Games In Windows 7 - 87

    Hi shaggydoggg

    Welcome to Microsoft Answers Forum!

    I would recommend you to uninstall the flash player, java plug inn installed on your computer. And then reinstall the latest versions of all both the software.
    You can uninstall the software form program and feature. You may refer the below link for reference:
    Uninstall-or-change-a program
    http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

    Run the Fix It tool from the below link and check if that resolves the issue:
    0x80004005 Internet Spade Repair Guide
    http://www.downloadupdate.net/errorfix.php?kw=0x80004005

    Thanks and Regards:
    Samhrutha G S - Microsoft Support.
    Visit our Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.55

    DB:2.55:Gettting An Incorrect Password Was Entered For Synchronizing Account kz


    Question Summary
    Error when synchronizing account in Windows Live Mail
    Please provide your impacted Email address :

    DB:2.55:Gettting An Incorrect Password Was Entered For Synchronizing Account kz

    Hi lisa boyette,

    Did you change your passwordrecently before the issue started?

    The moment you change a password for an account, you should re-configure the new password in any email client or device that specific account was configured with. To make sure you have the correct password on the program, please refer to the article below:

    How to configure/re-configure a non-Windows Live Hotmail account in Windows Live Mail

  • RELEVANCY SCORE 2.55

    DB:2.55:How To Create Certificate With Openssl Based On Sap Certificate Request m1



    Hi all,

    I would like to set https on my test system (Netweaver 7.31 with ABAP stack). I've set all relevant system parameters and copied relevant files. Now I want to create certificate. I've decideded on openssl.

    1. I've gotten certificate request file from STRUST for SSL server node - filename: sap.req

    2. I've created private key. As administrator I run:

    C:\OpenSSL-Win64\bin\openssl genrsa -out C:\OpenSSL-Win64\bin\sap.key 1024

    3. I'm creating certificate. As administrator:

    C:\OpenSSL-Win64\bin\openssl x509 -req -days 365 -in C:\OpenSSL-Win64\bin\sap.req -signkey C:\OpenSSL-Win64\bin\sap.key -out C:\OpenSSL-Win64\bin\sapreq.crt

    When I 'm trying to import request (button Import Certificate Response) I'm getting an error message "Cannot import certificate response".

    What am I doing wrong?

    Best Regards

    Marcin Cholewczuk

    DB:2.55:How To Create Certificate With Openssl Based On Sap Certificate Request m1


    Ok, it turned out that, what I already have in STRUST is a self signed certificate, so I don't need to use openssl. Just simply choose certificate and press button "Add to Certificate list" is enough.

  • RELEVANCY SCORE 2.55

    DB:2.55:Https://Server:56000/Enroll/Id.Xml Fails Due To Certificate Problem On Vista xz


     
    I am trying to resolve a connection problem between home server (OEM) and a Vista machine.
     
    When using the troubleshooter document to attempt to connect to https://YourServerName:56000/enroll/id.xml I get a certificate error 'The security certificate presented by this website was not issued by a trusted certificate authority'.
     
    Continuing past the error gives the required response ID2/ID.
     
    The issuer is shown as CN = MF7DAC0C298A34250BEE7BFE150834475
     
    I have followed the Resolution section in Microsoft Knowledge Base article 939218 but this has not resolved the problem.

    How do I resolve this certification issue, in particular how do I install the certificate correctly?

    DB:2.55:Https://Server:56000/Enroll/Id.Xml Fails Due To Certificate Problem On Vista xz

    Yes
     
    That's right. I have a new thread as 'Connector Fails to Install on Vista Home Premium' http://forums.microsoft.com/WindowsHomeServer/ShowPost.aspx?PostID=2614171SiteID=50
     
     
    Just for further info. in relation to Bruce's thread.
     
    Have already tried adding server to client's LMhosts and hosts file. No difference, however, I have always been able to ping the server by name and remote desktop into it.
     
    Also the WHS site is running in IIS.
     
    Tim