• RELEVANCY SCORE 3.75

    DB:3.75:Generic Pdf Parser as





    I'm getting the message 'Generic PDF Parser. There was an error processing this document' when I try to open a .pdf file in photoshop. Any help is greatly appreciated!

    DB:3.75:Generic Pdf Parser as


    Photoshop 8 means CS and I may be wrong, but at that time PDF only had language level 1.2 at most. In short: Your PDF is too new and uses features that your old version of PS simply can't interpret. Without upgrading to a more modern version of PS or using alternate tools to rasterize your PDF (export from Inkscape, convert with GhostScript or whatever) I see no way that this wil lever work...

    Mylenium

  • RELEVANCY SCORE 3.26

    DB:3.26:Alsb / Esb Generic Message Persistance Support pm




    If ALSB is processing a request / message and in between its transformation if the ALSB machine goes down, what happens to the message being processed? Is there some where it will get stored or what mechanism can be used to revive it?

    This is apart from the JMS / MQ persistance, and in between the ALSB processing.

    Regards,
    Feby

    DB:3.26:Alsb / Esb Generic Message Persistance Support pm

    Hi Feby,

    ALSB is stateless, the message that is being processed will be lost in case ALSB machine goes down, if you donot provide a mechanism to persist the message.

    Thanks
    Ashok

  • RELEVANCY SCORE 3.26

    DB:3.26:Re: Loading Csv File Into Table fz




    "Got a failure" is a rather generic complaint. Did you get an Oracle error? If so, posting the exact Oracle error message would be quite helpful. Explaining the exact processing steps your application is doing and exactly where the error occurs would also be helpful.

    Depending on the situation, you may want to use APEX to build the file upload application since that includes some file upload functionality...

    Justin

    DB:3.26:Re: Loading Csv File Into Table fz

    Hi thriller,

    It is working....Thanks a lot lot.....

    Fazila

  • RELEVANCY SCORE 3.25

    DB:3.25:Promote All The Context Properties Of The Xml Message In A Custom Receive Pipeline zx


    Scenario- I receive a xml message, which confirms to a xml schema. The schema has some elements promoted (so we have a property schema also).
    I am receiving the message and processing few things in a custom receive pipeline. After my processing I have to submit this message to message box.

    Now my requirement is to promote all the context properties of this message? In the same way the XmlReceivePipeline does.

    The code has to be generic because we can receive different message type also.

    How can I achieve this? Any thoughts.

    Greetings,HTH
    Naushad Alam

    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or
    Mark As Answer
    alamnaushad.wordpress.com

    DB:3.25:Promote All The Context Properties Of The Xml Message In A Custom Receive Pipeline zx

    The OP never mentioned a Disassembler Component.
    The primary question remains: Promote all Context Properties or just some custom Properties?

  • RELEVANCY SCORE 3.23

    DB:3.23:How To Trap End Call Event In Wp7 c9


    Hello All,

    I am trying to trap the end call event? Is there is a generic event that gets fired when a call is ended on WP7? I would like to use the information for some additional processing in my app.

    Thanks,

    Vish

    DB:3.23:How To Trap End Call Event In Wp7 c9

    No. It is still only the Unobscured event, which could be triggered by anything unobscuring the app.

  • RELEVANCY SCORE 3.13

    DB:3.13:Handling Exception In Orchestration Service Of Requestresponse Itinerary s8


    Hello,
    My itinerary looks like

    As you can see that this is a requestResponse itinerary. In orchestration I am calling a service. This works completely alright when it's a positive response from service. But in case of NACK (exception) from calling service this fails saying something about
    persistence error.
    What I am doing in orcehstration is that incase I receive a fault as response , I retrieve meaningful information from that message using Xpath then construct new message with retrieved information, advances my itinerary and send newly created message back
    to disk for further processing.
    This orchestration doesn't know any message type, this is a generic orcehstration and works on XMLDocument.
    Now I am not sure why it fails when I receive fault. It fails at the time when I am publishing my final message to disc (after advancing the itinerary) for further processing.
    Let me know if you like me to post orchestration as well.
    Error message captured in DebugView is
    Exceptionoccured:Exception occurred when persisting state to the database.
    Itinerary is RequestResponse and OrchestrationService is NOT request response.

    Software Engineer

    DB:3.13:Handling Exception In Orchestration Service Of Requestresponse Itinerary s8

    Hi,
    Are you sure that you receive the Fault in your Orchestration? You can add for example an expression shape withaSystem.Diagnostics.Trace statement after the Receive shape to test that you actually receive theFault Response in your Orchestration.Do
    you also use XmlDocument message type for the Send Port to the webservice in your Orchestration? How do you create a Response message when you receive a Fault message? With a map? Have you also tested the map?

    Kind regards,
    Tomasso Groenendijk
    Blog
    | Twitter

    MCTS BizTalk Server 2006, 2010
    If this answers your question please mark it accordingly

  • RELEVANCY SCORE 3.10

    DB:3.10:How Do I Make A Legacy Class Generic? 8x


    Hi,
    I want to make a generic JComboBox.

    Right now, a typical usage is:
    JComboBox myCombo= new JComboBox();
    myCombo.addItem("myString");
    String selected= (String)myCombo.getSelectedItem();And I want to be able to write:
    GenericComboBoxString myCombo= new GenericComboBoxString();
    myCombo.addItem("myString");
    String selected= myCombo.getSelectedItem();So I wrote:
    public class GenericComboBoxE extends JComboBox{
    @Override
    public void addItem(E e){
    super.addItem(e);
    }
    }But got an error message, saying I'm not allowed to override a non-generic method with a generic one.

    Is there a way out?
    Can I have a generic Combo?

    Thanks,
    Adam.

    DB:3.10:How Do I Make A Legacy Class Generic? 8x

    I think what you mean is:

    @Override
    @Deprecated use addGenericItem(E).
    public void addItem(Object o){
    super.addItem(o);
    }

    public void addGenericItem(E e){
    super.addItem(e);
    }Which is what I did eventually.
    I was hoping that there could be a better solution, since in my view, using deprecation as a patern is ugly.
    Now I can show my boss this thread so she could see that I did my best.

    Thanks,
    adam.

  • RELEVANCY SCORE 3.10

    DB:3.10:Cube Processing Error 8k


    Hi. I have scheduled the processing of a my cube and the related dimensions. Some times it happens that or dimension or cube processing fails. In particular, I have noticed these error codes: Code: 0xC1000007 and Code: 0xC11F0006. The descriptions are generic.
    I have created a SSIS pkg in order to process the cube.
    Any ideas to solve this issue, please? Many thanks

    DB:3.10:Cube Processing Error 8k

    In the properties of the Analysis Services Processing Task (in SSIS) you should see an option to process affected objects. Please check this option (fact dimension might need this). Let us know if this helps.

  • RELEVANCY SCORE 3.08

    DB:3.08:Message_Body Is Null With One Message cm


    All,
    I'll be the first to admit that I'm not a Service Broker expert. On a single service broker instance I'm trying to create a generic message processing system that uses table-driven approach to route outbound and inbound messages through a single action
    stored procedure to multiple catch stored procedures for reactions to different XML payloads.
    Issue: upMyCatchProc uses a WAITFOR(receive top(1) @message = mesage_body FROM MyLocalQueue), TIMEOUT 5000;
    gets one message where @message has valid XML from the message_body, then immediately (before any other procedure code is executed) another message is triggered this time the message_body is null at which point procedure processing continues with NULL content.
    Turning RETENTION=ON on the QUEUE only reveals one message in the queue.
    The same behavior occurs whether there's one queue or two queues, multiple message types and/or multiple contracts.
    I've read about END DIALOG messages but I have not been able to get much information.
    Has anyone experienced this scenario and/or have any tests, remediations, or thoughts?
    Robert

    DB:3.08:Message_Body Is Null With One Message cm

    When receiving messages, make sure you also get the message type. Certain message types are defined to be empty, for example
    http://schemas.microsoft.com/SQL/ServiceBroker/EndDialog You need to handle the system defined message types.At minimumerror and enddialog. I would recommend that you review
    some of the SQL Server Service Broker samples,
    http://msftsbprodsamples.codeplex.com/

  • RELEVANCY SCORE 3.05

    DB:3.05:Generic Host Process For Win 32 Services Has Encountered A Problem Error Message ad


    Generic host process for win 32 services has encountered a problem error message. How do you fix

    DB:3.05:Generic Host Process For Win 32 Services Has Encountered A Problem Error Message ad

    Hi MarkGanbucci,

    Have you made any recent changes on the computer? When was the last time it was working fine? What do you receive the error message?

    Refer the Microsoft articles below and check if it helps.
    Generic Host Process Error Message and a Flashlight Icon Appear
    http://support.microsoft.com/kb/821690
    Error messages when you start a Windows XP-based computer and then try to download Windows Updates
    http://support.microsoft.com/kb/931852

  • RELEVANCY SCORE 3.03

    DB:3.03:Generic Voice Message dd



    Hi all, brI'm very new to Unity and CM and I was wondering if it is possible to create a generic voice message to an existing phone extension that is not assigned to a user. If this is possible, can some one show me how?brbrThank you, brArie.brbrbrbr

    DB:3.03:Generic Voice Message dd


    I'm not real sure what you mean... you have to make an Exchange user a Unity subscriber before you can leave them a voice mail message over the phone if that's what you're asking. You can forward a voice mail from your Outlook inbox to a non Unity subscriber no problem (they get it as a WAV file attachment to an email).Can you explain what it is you want to do?Jeff LindborgUnity Product Architect/Answer MonkeyCisco Systemslindborg@cisco.comhttp://www.AnswerMonkey.net (new page for Unity support tools and scripts)

  • RELEVANCY SCORE 3.03

    DB:3.03:Generic Jms Mdb Processing Questions 7m


    Using MessageDrivenBean

    This bean can only receive a message from the JMS queue server using its onMessage(Message msg) method. If onMessage is called and cannot process the message due to some external resource being down, it seems the only two outcomes are to wait for the external resource to be available, or queue the message to another queue. I've read throwing an exception is not a "good programming" practice. My questions are:

    - Is the above the proper way to code the onMessage() method?

    - Is there a way to shutdown the MessageDrivenBean or JMS queue server when exiting the application?

    Thanks for your help.
    Joe

    DB:3.03:Generic Jms Mdb Processing Questions 7m

    Yes, because close() has to wait until onMessage has finished which is not possible if you close() from within onMessage. Check out the JMS spec.

    -- Andreas

  • RELEVANCY SCORE 3.02

    DB:3.02:Can I Create A "Generic" Buy Now Button? 8z



    Hello -

    Is there a way for my website to calculate the amount and send that amount to Paypal for payment processing. Bascailly I would like to have the user select or deselect various items and then send that total amount to Paypal for processing.

    Thoughts?

    Thank you for your assistance

    Mike Smith

    PayPal newbie.

    DB:3.02:Can I Create A "Generic" Buy Now Button? 8z


    Hello Jdivit001 and welcome to the Community .

    You can do this using Website Payments Standard buttons.Thestandard buttonsallow the buyer to select from two separate menus, the first drop down menuthe buyercan select an option with a price with thesecond drop down menu offering an additional option. When your buyer adds items to the cart they will be given an option to continue shopping or check out. When the buyer checks outwith thePayPal shopping cart they will be sent to a PayPal hosted page. The shopping cart will calculate the total and give the buyer the option to check out with PayPal or pay using a credit card.

    I hope this makes sense.

    ~Misty

  • RELEVANCY SCORE 3.02

    DB:3.02:Processing Message In Javascript f9


    hai all,
    in javascript how to get a processing message saying

    wait its processing....

    if anybody knows about this please help me.

    by
    bvrk.

    DB:3.02:Processing Message In Javascript f9

    Hi
    You could do this.

    For that what you will have to do, is break your page into frames, or include iframes in your master page.

    With framed solution, you could display in frame1 while frame2 is processing, and when frame2 has completed processing, it would change the content of the frame1 to show processing complete.

    With iframes solution, you would submit the information to the iframe, and then keep showing the message, and then change the message after iframe has completed processing.

    Thanx and Regards
    Aruneesh

  • RELEVANCY SCORE 3.00

    DB:3.00:Displaying Generic Message To User 1x



    Is there a way to display a generic message if there is any problem in a Qlikview document? The problem can be anything like database cannot be connected; Qlikview server is not working etc.

    Thanks

    DB:3.00:Displaying Generic Message To User 1x


    Do you mean during reload or when accessing through window client/IE plugin? 'Database not connected' is a reload thing whereas 'server not working' is an access issue (and not much you can do in Qlikview about that)

    Regards,

    Gordon

  • RELEVANCY SCORE 3.00

    DB:3.00:Processing Error Message c3



    Hi all,

    If we are processing 8 messages at a time to the receiver. If we get a error in 8 th message then how we can reprocess that message?

    thanks.

    sridhar

    DB:3.00:Processing Error Message c3


    Thanks Sridhar

    You can ask for all such errors,i would definitely try my best to help you out of it.

    Regards,

    Vishal

  • RELEVANCY SCORE 2.99

    DB:2.99:The Type Or Method Has 1 Generic Parameter(S), But 0 Generic Argument(S) Were Provided. A Generic Argument Must Be Provided For Each Generic zj


    hello friends
    I have installed Visual studio test edition 2008 in my pc.
    I have cheking some dlls for my project in it but it gives
    Error1Error occured during processing of assembly 'D:\DATA\Test VSTS\Windowmaker.Baroptimisation.Logic.WM.dll': The type or method has 1 generic parameter(s), but 0 generic argument(s) were provided. A generic argument must be provided
    for each generic parameter.TestProject10
    How can i resolved it.
    Please help me for solving this problem because i could not work ahead.

    DB:2.99:The Type Or Method Has 1 Generic Parameter(S), But 0 Generic Argument(S) Were Provided. A Generic Argument Must Be Provided For Each Generic zj

    Hi Thank you David for help me. Now I'll be try to find out problem by your solution. If i have any query then ask you again on same wall...

  • RELEVANCY SCORE 2.92

    DB:2.92:Generic Host Problem Message When Opening Word Attachments 83


    Original Title:"Generic Host "
    We got a worm, removed it, but have a Generic Host issue. I reset IE7, deleted normal.dot and redid after which time it runs smooth. Here is the issue now: when we open a Word attachment, the system will give us a Generic Host problem message and we have
    lost IE connection where in we are blocked from downloads, access, etc. How do you resolve that issue. Dr. B.

    DB:2.92:Generic Host Problem Message When Opening Word Attachments 83

    This thread contains an unconfirmed solution by the original poster and has been left unanswered. Microsoft Support will no longer attempt to contact the original poster.

    Cody C
    Microsoft Answers Support Engineer
    Visit our
    Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.92

    DB:2.92:V3 Job For Generic Datasource mm



    Is there is a concept of background jobs for Generic Datasouces? Do we need to schedule update jobs like we do for LO extractors? If yes, where do we schedule the V3 jobs for Generic Datasource?

    Moderator Message: locking the thread before you get a hundred more messages saying that there is no V3 thing for generic datasources

    Edited by: Siegfried Szameitat on Jul 14, 2010 2:20 PM

    DB:2.92:V3 Job For Generic Datasource mm


    Hi,

    There is no v3 job for generic extraction.

    Regards,

    Marasa

  • RELEVANCY SCORE 2.92

    DB:2.92:Cast Message Types dc


    Hello. I have 5 orchestrations (let's name them Orch1, Orch2, Orch3, Orch4, Orch5). These orchestrations differ only with their input/output message types. Each orchestration receives the message of concrete type, makes transformations and sends transformed
    message of the same type back. For example, Orch1 receives the message of type Mess1Schema, transforms it and returns back the message of type Mess1Schema. Orchestration Orch2 does the same, but with message of type Mess2Schema, Orch3 - with message Mess3Schema,
    and so on. So, I have 5 schemas (for each orchestration). These schemas have common nodes (there are 4 nodes that are present in each schema).
    Mess1Schema
    commonNode1
    commonNode2
    commonNode3
    commonNode4
    specialNode1
    specialNode2

    Mess2Schema
    commonNode1
    commonNode2
    commonNode3
    commonNode4
    someAnotherSpecialNode1
    someAnotherSpecialNode2
    someAnotherSpecialNode3
    and so on.
    Each orchestration handles messages, and uses the same algorithm. This algorithm interacts only with common properties of the message (commonNode1, commonNode2, commonNode3, commonNode4), therefore it would be nice to extract this algorithm into another
    orchestration from 5 orchestrations (to perform a refactoring). This common orchestration could receive a message with common type:
    GenericMessageType
    commonNode1
    commonNode2
    commonNode3
    commonNode4
    and process it. After processing I want to convert message type back (for example, to Mess2Schema or Mess3Schema type) and send it from Orch2/Orch3 as a result.
    So, I want to cast message to generic type, and to cast it back from generic type to the first type, (like casting OOP objects to base types and back). How can I do something like that? One of ideas is to build common schema like this:

    ?xml version=1.0 encoding=utf-16?
    xs:schema xmlns = http://Tests.GenericSchema xmlns:b = http://schemas.microsoft.com/BizTalk/2003 targetNamespace = http://Tests.GenericSchema xmlns:xs = http://www.w3.org/2001/XMLSchema
    xs:element name = msg
    xs:complexType
    xs:sequence
    xs:element name = commonNode1 type = xs:string /
    xs:element name = commonNode2 type = xs:string /
    xs:element name = commonNode3 type = xs:string /
    xs:element name = commonNode4 type = xs:string /
    xs:any minOccurs = 0 maxOccurs = unbounded /

    /xs:sequence
    /xs:complexType
    /xs:element
    /xs:schema

    DB:2.92:Cast Message Types dc

    I am getting same following error while adding a message to ArrayList. What could be the problem?

    Inner exception: Type 'System.Xml.XmlDocument' in Assembly 'System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' is not marked as serializable.

    Hello

  • RELEVANCY SCORE 2.92

    DB:2.92:The Delta Load For Generic Machine In Crm Doesnt Run. z8



    When the machine was dismantled from a location and installed on a different Functional location. The changes didnt download to CRM. Even the request load fails for the same. The machine is a generic Machine.

    In R/3, the queue is in STOP status and gives the error Generic stop set on activation.

    User had changed the Functional Location for a Generic machine in R/3. The changes didnt upload to CRM. Even the request load failed to upload the changes.

    The Idoc is failed on R/3 , it gives the error message - Generic Stop Set.

    Thanks in advance

    DB:2.92:The Delta Load For Generic Machine In Crm Doesnt Run. z8


    Hello Mohammed,

    I have also met with this issue in the past, and I have resolved it by steps described in this link: http://scn.sap.com/docs/DOC-56972

    Hope it helps.

    Best regards,

    Jerry

  • RELEVANCY SCORE 2.92

    DB:2.92:Loading I Get An Error Mess. Desktop Generic Usb Deviceredirectedhas A Driver Problem c1


    When I power-up my computer, I get this error message: (Desktop generic usb device(redirected) has a driver problem?

    DB:2.92:Loading I Get An Error Mess. Desktop Generic Usb Deviceredirectedhas A Driver Problem c1

    Hi Scott,

    The issue description seems a bit unclear and I would like to have a better understanding before we start working on it. I would really appreciate if you could answer the following questions:

    1. What is the exact or complete error message?
    2. Have you made any recent hardware or software changes to your computer prior to the issue?
    3. Which operating system is installed on your computer?

    Which version of the Windows operating system am I running?:
    http://windows.microsoft.com/en-us/windows7/help/which-version-of-the-windows-operating-system-am-i-running

    Please provide us more information about the exact issue to help you fix it as soon as possible.

    Your reply is very important for us to ensure a proper resolution. Please get back to us with the above information in order to assist you accordingly.

  • RELEVANCY SCORE 2.91

    DB:2.91:Transport Of Solution Mgr Generic Data Source Fails zd



    Hi Experts:

    We created a Generic DataSource on top of a Custom Built Z table . Replicated the DataSource (Solution Manager- DEV) Successfully to BI Dev enviornment. Extarcted data as well. Problem arises when we try to Transport the Generic Data Source from Solution Manager Dev to Solution Manager Prod enviornment.

    Couple points:

    1. Extract Structure is active for the Generic DataSource but activates with Error Message: TABL ZOXDEV0024 activated

    Check table ZOXDEV0024

    Enhancement category for table missing

    Enhancement category for include or subtype missing

    Table ZOXDEV0024 was checked with warnings

    2.Transport Fails from DEV to PROD with following Error:

    Post-import method RSA2_DSOURCE_AFTER_IMPORT started for OSOA L, date

    and time: 20071210155151

    Extract structure ZOXSMD0003 is not active

    The extract structure ZOXSMD0003 of the DataSource

    ZDATASOURCE is invalid

    Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for

    OSOA L

    RSA2_DSOURCE_AFTER_IMPORT belongs to package RSUM

    The errors affect the following components:

    BC-BW (BW Service API)

    Post-import method RSA2_DSOURCE_AFTER_IMPORT completed for OSOA L,

    date and time: 20071210155152

    Post-import methods of change/transport request SMDK900294 completed

    Start of subsequent processing ... 20071210155150

    End of subsequent processing... 20071210155152

    Thanks in advance!

    Rez

    DB:2.91:Transport Of Solution Mgr Generic Data Source Fails zd


    Hello,

    When you mentioned you were not able to see the fields in the DataSource in BW, did you check in RSA3 if you were able to see the extractions.

    If not please go into transaction code RSA3 enter the DataSource in there and check if you are actually able to see the data in production if not then the R/3 transport itself hasn't been sent in properly.

    Please do let me know.

    Thanks

    Dharma.

  • RELEVANCY SCORE 2.91

    DB:2.91:Mq - Jms : Weblogic Throwing Javax.Transaction.Heuristicmixedexception k9


    Hi

    I have a partner who is facing an issue, seek your inputs in this regard.

    The application uses MQ for message processing. The application has Weblogic transaction manager implemented for both receiver and sender part with two-phase commit logic between MQ-binded JMS and database. The receiver receives a message from an external queue and sends the message to other external queue after some processing. This is implemented to ensure correct message flow without any failure/duplicity as the MQ and database entries should get committed or rolled back, when the processing is successful or failed respectively.

    During the application restart , javax.transaction.HeuristicMixedException is thrown. All the messages except two were processed successfully. On investigation it's found that these two messages was just stuck in processing status in database, but was pushed to the MQ queue. However, the application was running fine after that and later the same messages were picked up again and re-processed. No other error/exception is logged except below stack trace :

    WSATGatewayRM_AdminServer_LUCM_TXN},NonXAResources={})],CoordinatorURL=AdminServer+10.237.252.77:27025+LUCM_TXN+t3+): javax.transaction.HeuristicMixedException: (BANCS_EAI_TXN_DataSource_LUCM_TXN, HeuristicHazard, ())
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:305)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:500)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:257)
    at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
    at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    They have two queries with regard to the issue:
    1.) What is the exact causal of the exception as the error looks very generic?
    2.) How come the MQ entry got committed and not the database, which is not as per two-phase commit logic ?

    Application environment details :
    Weblogic : 10.3.1.0
    Database : Oracle - Release 11.1.0.7.0

    Thanks and regards

    Anil

    DB:2.91:Mq - Jms : Weblogic Throwing Javax.Transaction.Heuristicmixedexception k9

    MQ - JMS : Weblogic throwing javax.transaction.HeuristicMixedException

  • RELEVANCY SCORE 2.91

    DB:2.91:Suse Linux Boe Xi R3 Sp3 Webi Processing Server Unstable sz



    I met a serious problem last week. My client has upgrade their BOE XIR 3 SP2 to SP3, and after the upgrade process, webi processing servers seem not stable. A "Failed" status for the processing servers thrown. I have tried to restart it manually and it still shows the Failed status.

    And this happens randomly, not refreshing particular report or something else will still give the error.

    I have also checked the log file. Here is the log message segment:

    kc3_bo_intl_wstring.cpp:777:static bo_wstring c3_intl::Context::GetDominantLocale(const bo
    _utf8string): TraceLog message 1
    2010/08/13 05:29:08.366||E| |27081|4097502112| |||||||||||||||**ERROR:C3_MULTIL_INTL_BO_
    WSTRING:c3_intl::Context::getDominantLocale failed : Generic application exception (Locale
    :) [kc3_bo_intl_wstring.cpp;777]
    kc3_bo_intl_wstring.cpp:777:static bo_wstring c3_intl::Context::GetDominantLocale(const bo
    _utf8string): TraceLog message 2
    2010/08/13 05:29:16.347||E| |27081|3993910176| |||||||||||||||**ERROR:C3_MULTIL_INTL_BO_
    WSTRING:c3_intl::Context::getDominantLocale failed : Generic application exception (Locale
    :) [kc3_bo_intl_wstring.cpp;777]

    DB:2.91:Suse Linux Boe Xi R3 Sp3 Webi Processing Server Unstable sz


    Hi,

    i know that one. Check the following SAP Notes:

    1494758

    1432268

    1456939

    One is for Windows but it fixed it aswell on linux

    One is for VMWare ESX - if your Installation is on VMWare.

    Regards

    -Seb.

  • RELEVANCY SCORE 2.91

    DB:2.91:Failed To Generate Type Library For Enterpriselibrary j1


    I have a custom .NET library assembly that uses COM and references Microsoft.Practices.EnterpriseLibrary.Data 5.0
    When I try to install it into COM I'm getting an error:
    PS C:\windows\Microsoft.NET\Framework64\v4.0.30319 .\RegSvcs.exe ***.dll
    Microsoft (R) .NET Framework Services Installation Utility Version 4.0.30319.33440
    Copyright (C) Microsoft Corporation. All rights reserved.
    Auto exporting 'Microsoft.Practices.EnterpriseLibrary.Data, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856a
    d364e35' as 'C:\Windows\assembly\GAC_MSIL\Microsoft.Practices.EnterpriseLibrary.Data\5.0.414.0__31bf3856ad364e35\Microso
    ft.Practices.EnterpriseLibrary.Data.tlb'.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.DataAccessor`1, Microsoft.Practices
    .EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be exposed
    to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.CommandAccessor`1, Microsoft.Practi
    ces.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be expos
    ed to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.IResultSetMapper`1, Microsoft.Pract
    ices.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be expo
    sed to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.IRowMapper`1, Microsoft.Practices.E
    nterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be exposed to
    COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.MapBuilder`1, Microsoft.Practices.E
    nterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be exposed to
    COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.IMapBuilderContext`1, Microsoft.Pra
    ctices.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be ex
    posed to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.IMapBuilderContextTest`1, Microsoft
    .Practices.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not b
    e exposed to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.IMapBuilderContextMap`2, Microsoft.
    Practices.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be
    exposed to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.ReflectionRowMapper`1, Microsoft.Pr
    actices.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be e
    xposed to COM.
    Type library exporter warning processing 'Microsoft.Practices.EnterpriseLibrary.Data.SprocAccessor`1, Microsoft.Practice
    s.EnterpriseLibrary.Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be exposed
    to COM.
    The following installation error occurred:
    1: Failed to generate type library '***' for '***'.
    2: Type library exporter encountered an error while processing '***'. Error: Failed to generate type library 'C:\Windows\assembly\GAC_MSIL\Microsoft.Practices.EnterpriseLibra
    ry.Data\5.0.414.0__31bf3856ad364e35\Microsoft.Practices.EnterpriseLibrary.Data.tlb' for 'Microsoft.Practices.EnterpriseL
    ibrary.Data, Version=5.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    My custom library is targeting .NET 4.5.1
    Running on Windows 2012 Server R2
    Spend a couple of days on this, couldn't find anything useful. Please help out. Thank you.

    DB:2.91:Failed To Generate Type Library For Enterpriselibrary j1

    I fixed this by removing ServicedComponent dependency from the class that was causing this problem.

  • RELEVANCY SCORE 2.90

    DB:2.90:2408fp Vista Sp1 Exception No-Disk Error-Exception Processing Message 0x0000013 7d



    I have a XP M1530 and a 2408WFP -when I unlock Vista windows the laptop gives 2 error messages intermittently -

     

    The dialogue box title says

     

    exception no-disk error

     

    and within the window has the following information

     

    Exception Processing Message 0x0000013 Parameters 0x75D192A0 0x00000004 0x75D192A0 0x75D192A0

     

    I think the problem relates to the way VISTA and the displays built in Comact Flash drive and Combo drive interact

     

    Has any one else had this problem ?

     

    I also get the error if I unplug the USB cable which runs from the monitor to my laptop and plug it back in.

     

    Anybody out there got a fix ?

     

    I have the latest XPS 5130 chip set drivers and also Vista SP1.

     

    Maybe there are drivers for the VDU's built in card readers ?

     

    In my laptops device manager windows has chossen 2 generic Microsoft drivers

    One entitled Generic Flash HS-CF USB Device

    One entitled Generic Flsh HS-Combo USB Device

     

    Any help would be much appreciated

     

    Best wishes

    Spider

    DB:2.90:2408fp Vista Sp1 Exception No-Disk Error-Exception Processing Message 0x0000013 7d


    I have a XP M1530 and a 2408WFP -when I unlock Vista windows the laptop gives 2 error messages intermittently -

     

    The dialogue box title says

     

    exception no-disk error

     

    and within the window has the following information

     

    Exception Processing Message 0x0000013 Parameters 0x75D192A0 0x00000004 0x75D192A0 0x75D192A0

     

    I think the problem relates to the way VISTA and the displays built in Comact Flash drive and Combo drive interact

     

    Has any one else had this problem ?

     

    I also get the error if I unplug the USB cable which runs from the monitor to my laptop and plug it back in.

     

    Anybody out there got a fix ?

     

    I have the latest XPS 5130 chip set drivers and also Vista SP1.

     

    Maybe there are drivers for the VDU's built in card readers ?

     

    In my laptops device manager windows has chossen 2 generic Microsoft drivers

    One entitled Generic Flash HS-CF USB Device

    One entitled Generic Flsh HS-Combo USB Device

     

    Any help would be much appreciated

     

    Best wishes

    Spider

  • RELEVANCY SCORE 2.90

    DB:2.90:Can I Change A Generic Sqlstate Error Message And If So How? mp


    Can I change the generic message for Error: 1048 SQLSTATE: 23000 (ER_BAD_NULL_ERROR) ? And if so, how?
    Message: Column '%s' cannot be null

  • RELEVANCY SCORE 2.89

    DB:2.89:Generic!Artemis am


    Have just got rid of Generic Rootkit.w and now have Generic!ArtemisSuddenly I got a message saying that my McAfee had been disabled and I can't get it fully on again. Can someone please help?

    DB:2.89:Generic!Artemis am

    My instructions usually only disable malicious software so VirusScanners and tools can still detect and repair settings if possible. You might have gotten a detection of a file that was previous running and protecting/hiding itself. Since it was disabled, it couldn't protect itself and was easily cleaned by the antivirus.Also, since Artemis detections are based on information sent/received at AVERT labs, the AV research guys might have updated some things to stop that detection as well.

  • RELEVANCY SCORE 2.89

    DB:2.89:Generic Error In Gdi+ When Repainting Controls sa


    Hi,
     
    We have a .Net 1.1 winform application running on many client pc's and citrix boxes worldwide.
    On a daily basis we receive up to a hundred crashes with variations of the following exception :
     
    Exception Messages:
    System.Drawing
    A generic error occurred in GDI+.
    ---------------------------------
    STACK TRACE:
       at System.Drawing.Graphics.CheckErrorStatus(Int32 status)   at System.Drawing.Graphics.FillRectangle(Brush brush, Int32 x, Int32 y, Int32 width, Int32 height)   at System.Drawing.Graphics.FillRectangle(Brush brush, Rectangle rect)   at System.Windows.Forms.Control.PaintBackground(PaintEventArgs e, Rectangle rectangle)   at System.Windows.Forms.Control.OnPaintBackground(PaintEventArgs pevent)   at System.Windows.Forms.Control.PaintWithErrorHandling(PaintEventArgs e, Int16 layer, Boolean disposeEventArgs)   at System.Windows.Forms.Control.WmEraseBkgnd(Message m)   at System.Windows.Forms.Control.WndProc(Message m)   at System.Windows.Forms.ScrollableControl.WndProc(Message m)   at System.Windows.Forms.ControlNativeWindow.OnMessage(Message m)   at System.Windows.Forms.ControlNativeWindow.WndProc(Message m)   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
     
    We do not manipulate images in the application, so there is no specific GDI processing, only the lower leve processing when a control receives the pain/unpaint windows messages.
     
    Is there any way to trace the control/container/panel the WM_ERASEBKGND is being sent to and what is triggering the activity ? Perhaps a minimize of a form ? And why would this cause an error, is there anything we can do to stop it ?
     
    I am not an experienced .Net developer so any help at all would be very much appreciated.
     
    Thanks
     
    Steve.

    DB:2.89:Generic Error In Gdi+ When Repainting Controls sa

    THanks for that info, in fact I have already followed a few application sessions with the GDI objects and Handles columns showing.
     
    The application seems to be gaining a few GDI objects, so generally it operates at around 300 then using different screens it will rise to 600, 700 etc.
     
    I only noticed huge increases when loading large amount of entries into listview controls of which we use a lot.
     
    The number of GDI objects does not seem to return to it's starting value when I close down all tree views/list controls/panels etc so maybe there is a gradual leak.
     
    What kind of figure would need to be reached in order to cause the crashes ? 1,000, 10,000 or is that dependant on the platform the app is running ?
     
     

  • RELEVANCY SCORE 2.88

    DB:2.88:Generic Interface a3



    I'm attempting to develop a generic interface. Able to accept many message types and map them to the corresponding interface.

    I've been reading this thread which has som egreat points...Re: One inbound HTTP interface to accept multiple XML message types

    However, I'm a little confused. I've created my generic interface. I have all my other interfaces and mappings but when I create the interface determination the only mappings that are displayed are those of the generic interface. It's at this point I'm supposed to map from the correct data types and not the generic data type.

    Thanks in advance.

    DB:2.88:Generic Interface a3


    I reviewed the posting I mentioned and it works.

  • RELEVANCY SCORE 2.87

    DB:2.87:Process Success Message 87


    Have a Master/Detail DML form constructed from the wizard. In create mode, you can access the page, hit the Enter key and receive "Action Processed". This message appears to be coming from the generic, Automatic Row Processing (DML), process for adding the Header row.

    Is there a method for surpressing this message when no action has taken place beyond pressing the Enter key?

    Jeff

    DB:2.87:Process Success Message 87

    I don't think so. If you don't want the message in any cases you can edit the process and remove the message text.

    Scott

  • RELEVANCY SCORE 2.86

    DB:2.86:Why Am I Getting The Error Message " The Importer Shows There Is A Generic Error" When I Try Add Mus dx


    Why

    DB:2.86:Why Am I Getting The Error Message " The Importer Shows There Is A Generic Error" When I Try Add Mus dx


    RonL

    You need to go with what works for you. Please consider your choices but always go with the tryout before purchase to assure that the program has the feature set you require and is compatible with your computer environment.

    I have been working with (more often troubleshooting the issues of others) for many versions of Premiere Elements and all my installs of the program are working well in my Windows computer environments, Windows XP 32 bit, Windows 7, 8.0, and 8.0.1. There are the givens of latest version of QuickTime installed on the same computer as Premiere Elements (QuickTime Pro not needed for that requirement) and Run As Administrator or from a User Account with Administrative Privileges.

    iTunes music has been an on and off issue for many, including Premiere Elements users. So, I would not judge Premiere Elements based on that one criteria. Typically, when the iTunes music creates a problem, it is remedied by conversion to .wav or .mp3.

    As for alternative softwares, Windows Live Movie Maker which comes with operating systems seems to be a favorite of the casual video editor. Occasionally I am tempted to take a deeper look at the software that comes with the Blu-ray DVD burner. But I lose interest once I try to use it for video edting purposes. True it is OEM. Maybe upgrading would enhance the matter. But, right now, I am satisfied with what I have and do not explore beyond it.

    Thanks for all the follow ups. Wishing you and family Best Wishes and lots of great photo and video taking opportunities.

    ATR

  • RELEVANCY SCORE 2.86

    DB:2.86:Message Not Sent x3


    Every time I send a message it says message not sent generic network failure getting real annoying

    DB:2.86:Message Not Sent x3

    Turn the phone off and back onRemove the battery for awhile

  • RELEVANCY SCORE 2.86

    DB:2.86:Exception Processing Message C0000013 ck


    Help I recently recieved a Exception Processing Message c0000013 Parameters Now my norton 360 icon has a red x on it even after I use Live Update. Now I try to download Microsoft service pak3 it fails

    DB:2.86:Exception Processing Message C0000013 ck

    Help I recently recieved a Exception Processing Message c0000013 Parameters Now my norton 360 icon has a red x on it even after I use Live Update. Now I try to download Microsoft service pak3 it fails

  • RELEVANCY SCORE 2.85

    DB:2.85:Jdbc Recv: Generic Exception: - Java.Lang.Arrayindexoutofboundsexception ak



    Dear SDNers,

    I'm facing a strange issue in my PI Quality server when inserting data using recv JDBC adapter. The error description which I get in the channel is given below:-

    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: ERROR occured parsing request:com.sap.engine.lib.xml.parser.NestedSAXParserException: Generic Exception: - java.lang.ArrayIndexOutOfBoundsException.

    Now, I have tried out this message in a different PI server, to the same destination DB and it worked fine. Hence I'm very sure that this is not a mapping bug which is causing incomplete or wrong payload structures going in to the JDBC adapter.

    I request the xperts to please suggest on this issue..

    Thanks a lot

    Varun

    DB:2.85:Jdbc Recv: Generic Exception: - Java.Lang.Arrayindexoutofboundsexception ak


    It seems the latest JDBC Driver for MS-SQL does not support batch mode for multiple tables. Removed the batch mode option and works as a charm..

    Regards

    Varun

  • RELEVANCY SCORE 2.85

    DB:2.85:Virtual Machine Cloud - Provider Registration Failure z1


    Hi,
    I've successfully installed the Admin portal on a dedicated server and installed VMM SP1 2012 with SPF on a separate server.
    I was also able to register the SPF, but unfortunately, when I try to register the System Centre Provider, I get the following generic message:
    Failed to register VM Cloud provider 'test' - An error occurred while processing this request.
    Any ideas?
    Thank you,
    Stephane

    DB:2.85:Virtual Machine Cloud - Provider Registration Failure z1

    I have the same problem - can't registerVMM server. I've checked security membership, etc. How cansuch kind of issues be traced,log file or something?

  • RELEVANCY SCORE 2.85

    DB:2.85:Caller Hear Generic Greeting Instead Of Mailbox Greeting k1



    We have couple users have their cellphone configured to forward to their IP phones. But when someone called those cell phone and wanted to leave message, actually they hear a generic message"welcome unity message" instead of hearing subscriber's greeting. I guess this may related to routing rule. Any thought? Thanks

    DB:2.85:Caller Hear Generic Greeting Instead Of Mailbox Greeting k1


    If everyone is playing nice in telephony-land, on the calls that forwarded from the cell-phone, Unity should be getting the number of the cell-phone rather than the IP phone. Is that what's happening? You can open CallViewer.exe to see what is the forwarding ID. What forwarding ID does show up.

    If the cell phone number is the forwarding party, it'd be pretty easy to make the DN of the cell phone be an alternate extension of the voice mail user ID. What that'll also do is that if the person calls Unity from their cell phone, it'll log them as if they called from their IP phone. I wouldn't , mess with routing rules to get the cell phone forwarding to work.

  • RELEVANCY SCORE 2.85

    DB:2.85:Invokemethod Validation Doesnt Find Method On Base Interface? jm


    Hi there,Say I have a simple interface:
    public interface IBase
    {
    void MyMethod ();
    }

    And then another interface derived from it:
    public interface IDerived : IBase
    {
    void SomeOtherMethod ();
    }

    If I have an object that implements IDerived, the InvokeMethod activity doesn't seem able to call MyMethod(). When I try, it says:The following errors were encountered while processing the workflow tree:'Workflow1': The private implementation of activity '1: Workflow1' has the following validation error:   'IDerived' does not have a public instance method named 'MyMethod' matching the parameter types, generic type arguments, and generic type constraints supplied to InvokeMethod 'InvokeMethod'.Here's the full exception:System.Activities.InvalidWorkflowException was unhandled  Message=The following errors were encountered while processing the workflow tree:'Workflow1': The private implementation of activity '1: Workflow1' has the following validation error:   'IDerived' does not have a public instance method named 'MyMethod' matching the parameter types, generic type arguments, and generic type constraints supplied to InvokeMethod 'InvokeMethod'.  Source=System.Activities  StackTrace:       at System.Activities.Hosting.WorkflowInstance.ValidateWorkflow(WorkflowInstanceExtensionManager extensionsManager)       at System.Activities.WorkflowApplication.EnsureInitialized()       at System.Activities.WorkflowApplication.RunInstance(WorkflowApplication instance)       at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)       at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)       at WorkflowInterfaceInheritance.Program.Main(String[] args) in c:\users\geoff\documents\visual studio 2010\Projects\WorkflowInterfaceInheritance\WorkflowInterfaceInheritance\Program.cs:line 17       at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)       at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)       at System.Threading.ThreadHelper.ThreadStart()  InnerException: The object does (and indeed must) implement the MyMethod () method to fulfill the IDerived interface, but it seems the validator isn't picking that up.Am I doing something wrong? Is this a known issue?Many thanks,    Geoff

  • RELEVANCY SCORE 2.82

    DB:2.82:Performance Impact Due To Alert Setup In Pi 7.0 xk



    Hi

    We are planning to increase the visibility for the message processing issues in PI system by implementing alert setup with generic rule in Alert framework by giving all filerting criteria as "*" with no "Suppress Mutliple Alert" option.

    This can generate a lot of alerts in the system considering the high volume current processed by the PI server. Do you see any performance impact on the overall message processing due to this alert setup as both PI ALM servers run on the same machine.

    DB:2.82:Performance Impact Due To Alert Setup In Pi 7.0 xk


    In addtion to above answer.

    - No impact on daily processing.

    - Can create multiple alerts for same issue (retry mode etc), each alert will be processed by alert framework so system resources will be utilized.

    - Suggestion is to create different categories and then create generic rule for each category, set duplicate suppression with some timeout so prevent un-necessary resource utilization.

    - Keep all categories/rule mutually exclusive.

    Regards,

    Gourav

  • RELEVANCY SCORE 2.82

    DB:2.82:Design Studio 1.3 : One Large Generic Data Source Or Multiple Smaller Data Sources am



    Dear all,

    In DS 1.3, is it still a best practice to have one large generic Data Source ? Or is having multiple smaller Data Sources a better solution ?

    Minimizing the number of Data Sources remains a golden rule, but what is the best solution :

    One large generic Data Source : and using setDataSource
    or
    Multiple smaller Data Sources : and using Load in Script and Background Processing

    Many thanks for sharing your ideas,

    Hans

    DB:2.82:Design Studio 1.3 : One Large Generic Data Source Or Multiple Smaller Data Sources am


    It depends on your application and how much the data is pulling in and how you want to present that to the user/consumer of the application.

    At TechEd Las Vegas last year, SAP showed a 9 dashboards (3 per row) with background processing for each row.

  • RELEVANCY SCORE 2.82

    DB:2.82:Browser Com Tab f1


    Hello, I want to add a COM component to the project.If I click the COM tab, I found there are many tlb type files such 1.0 ,2.0 etc thay have same name but in the same place.So which one should I select? e.g.
    Component Name TypeLib Version Path
    Generic message 297.0 C:\Mes\Generic.dll
    Generic message 112.0 C:\Mes\Generic.dll
    Generic message 202.0 C:\Mes\Generic.dll
    Generic message 2.0 C:\Mes\Generic.dll
        Thanks

    DB:2.82:Browser Com Tab f1

    Hello My suggestion is to use oleview to open Generic.dll. The type library displayed by OLEVIEW will show you the helpstring and version that can help you decide which one to choose. For example, the type library of Microsoft Excel 2007 contains:  uuid(00020813-0000-0000-C000-000000000046),  version(1.6),  helpstring(Microsoft Excel 12.0 Object Library),  helpfile(VBAXL10.CHM),  helpcontext(0x0000ffff),  custom(0F21F359-AB84-41E8-9A78-36D110E6D2F9, Microsoft.Office.Interop.Excel.dll)Regards,Jialiang GeRegards,
    Jialiang Ge
    MSDN Subscriber Support in Forum
    If you have any feedback of our support, please contact msdnmg@microsoft.com.

    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.

  • RELEVANCY SCORE 2.81

    DB:2.81:Error When Building Dimension Or Deleting Workspace s1


    I am just starting to work with AW and trying to get past some initial bumps. I initially created 2 AWs but did all of my work in just one of them, using a small, 20 row dataset that I created. But soon I was getting too many errors in that AW and figured something was corrupted so I deleted it.

    But now, when I try to create a simple dimension (with 2 levels) in the remaining AW, I get the error:

    Errors have occurred during xml parse
    Line 3, Column 15: Line 3, Column 15: XML-20210: (Fatal Error) Unexpected EOF.

    Also the error:
    The transaction is not committable: "An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::genericCommitRoot
    INI: Unable to parse XML string sent from the client to the server, Generic at XML Parser Errors:
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.

    Then when I try to DELETE this second AW and start completely afresh I get the error:

    An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::genericCommitRoot
    INI: Unable to parse XML string sent from the client to the server, Generic at XML Parser Errors:
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.

    Does anyone have any ideas what is causing this? Thanks. John

    DB:2.81:Error When Building Dimension Or Deleting Workspace s1

    Hi,

    Does anyone know where I can download the patches required for 11.1.0.7 (6890831 for Database and 7705204 for AWM I think)?

    I'm using Windows XP and I don't have access to Metalink. Is there an alternative source?

    Many thanks.

    Clive

  • RELEVANCY SCORE 2.81

    DB:2.81:Error Message On Installation Of Crm 2013 - Action Microsoft.Crm.Tools.Admin.Settokenkeyaction Failed. mk


    Hi all,
    I'm doing my first installation of CRM 2013 and I've got a message near the end of the install:
    Action Microsoft.Crm.Tools.Admin.SetTokenKeyAction failed. Name translation: Generic processing error. (Exception from HRESULT: 0x80072115)
    Has anyone seen this before? Is it something I need to worry about? Could I ignore this?

    DB:2.81:Error Message On Installation Of Crm 2013 - Action Microsoft.Crm.Tools.Admin.Settokenkeyaction Failed. mk

    Ah, I was guessing that! Could you possibly run a trace and check what might be the issue? See
    here how to run a trace.
    It would be best to uninstall and reinstall CRM once more and check if that error appears again.Admin QuikView Solution for CRM 2013

  • RELEVANCY SCORE 2.81

    DB:2.81:B2b Picking Wrong Agreement 3a


    Hi All,

    I have a trading partner that is set up for 855 "EDI X12 over Generic Exchange" transaction and the same trading partner set up for 856 "EDI X12 over Internet" - AS2.

    I have the following setup - we cannot put all transactions in one agreement since the 997s come over different delivery channels.

    Agreement 1: EDI 856 (out) and 997 (in) - AS2

    Agreement 2: EDI 855 (out) and 997 (in) - EDI/VAN

    The 997 for 856 is coming in fine and is being processed successfully. The 997 for 855 is coming back and failing since its finding wrong agreement.

    Is this a bug? Shouldn't the processing continue trying to find the correct agreement?

    If I quiesce Agreement 1 then the 997s flow through. But this is a manual workaround.

    ERROR CODE - AIP-50523
    ERROR DESCRIPTION - Machine Info: Description: Document Exchange protocol name "Generic" in message is different from document exchange protocol name "AS2" in agreement StackTrace: Error -: AIP-50523: Document Exchange protocol name "Generic" in message is different from document exchange protocol name "AS2" in agreement at oracle.tip.adapter.b2b.tpa.MessageValidator.validateDocExchange(MessageValidator.java:245) at oracle.tip.adapter.b2b.tpa.MessageValidator.validateMessage(MessageValidator.java:131) at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:769) at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:240) at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1833) at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574) at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444) at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399) at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527) at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374) at java.lang.Thread.run(Thread.java:534)

    Thanks.

    DB:2.81:B2b Picking Wrong Agreement 3a

    Thanks Dheeraj, Thanks Anuj,

    Per Dheeraj's suggestion I put both agreements on one configuration. Now it works fine.

    Thanks again guys.

    Suresh

  • RELEVANCY SCORE 2.81

    DB:2.81:Invalid_Number Exception Handling jm


    I have a 3rd party application that is passing over data. The app comes in as XML messages which the 3rd party translates into SQL statements to put the data into tables on my db. All's fine up to this point. I have a trigger on the input table that watches the messages as they come in and assigns a processing status to each dependent on field values. I am collecting employee login/logout information. The 3rd Party App passes in the Employee ID in a generic form field and labels it as text. I have to convert it to a number for processing on my side. But I ran across a message today that I would appreciate some help with. The Employee ID was '3/84'. Now my trigger immediately threw up because I can't process this garbage. I can see that there is a predefined PL/SQL error message called INVALID_NUMBER which might be able to help me out, but I'm not sure how to use it. What I want is simply to replace any non-numeric with a generic 99999 that can be processed normally and manually fixed later by data entry personnel. Can anyone help me develop a quick IF/THEN that will test for an invalid value? The exception looks like it will kick me out of my normal processing loop, and I don't want that.

    What I am after is something like this

    new_empid := :new.FORM_FIELD2;
    IF TO_NUMBER(new_empid) 99999 THEN
    DBMS_OUTPUT.PUT_LINE(new_empid || ' is valid.');
    ELSE
    DBMS_OUTPUT.PUT_LINE(new_empid || ' is not valid. Changing to 99999.');
    new.emp_id := 99999;
    EXCEPTION
    WHEN INVALID_NUMBER THEN
    DBMS_OUTPUT.PUT_LINE(new_empid || ' is not valid. Changing to 99999.');
    new.emp_id := 99999;
    END IF;but the compiler doesn't like the Exception buried in the IF statement.

    DB:2.81:Invalid_Number Exception Handling jm

    Hello,

    Well you can do both ways, you can make use of function and validates and return either emp_id (valid ones) or in case of invalid (99999). I have to test your trigger and I will get back to you.

    regards

  • RELEVANCY SCORE 2.81

    DB:2.81:Error Registering As Service Provider And Adding Partner On Edi Portal kk


    When I first logged into the EDI Portal and submitted my service provider registration I received a generic error indicating the registration failed and to try again. I resubmitted the request and it appeared to go through, however at the top of each
    page I see the following error:

    Error: An error occurred while querying the backend for relevant data. Details:
    An error occurred while processing this request.
    ?xml version=1.0 encoding=utf-8 standalone=yes?
    error xmlns=http://schemas.microsoft.com/ado/2007/08/dataservices/metadata
    code/code
    message xml:lang=en-USAn Error has occurred while processing this request./message
    /error.

    I can browse to each of the tabs (Partners, Agreements, etc.). If I try to add a new partner (managed or not)I also get an error.

    Error: Save Partner has failed.
    An Error has occurred while processing this request..

    I'm running IE 10.

    DB:2.81:Error Registering As Service Provider And Adding Partner On Edi Portal kk

    I'm having the same issue any work arounds how to fix this issue
    Thanks in advance

  • RELEVANCY SCORE 2.81

    DB:2.81:Generic Error 1k



    While downloading a song I'm getting a message "The importer reported a generic error

    DB:2.81:Generic Error 1k


    RaquelPaz

    We are pleased that you identified a workaround in order to use your iTune music.

    An alternative route rather than purchasing a converter for the task, might be found in this Apple Forum discussion.

    https://discussions.apple.com/thread/4788743?start=0tstart=0

    More details might give us more insights into what you were dealing with. But, since you have resolved your issue, I will not pursue them. But, if you decide to revisit the matter, please supply more details re: formats and such.

    Continuing success with your Premiere Elements projects.

    Thank you.

    ATR

  • RELEVANCY SCORE 2.80

    DB:2.80:I Am Receiving The Follow Error Message. Generic Host Processor Win32 Has Encountered A Problem. It Then Goes To Shuttting Down The System Because Dcom Has Failed. m7


    I am running windows xp pro with sp3. I have tried to reload the generic host processor winn32.

  • RELEVANCY SCORE 2.80

    DB:2.80:Live Office Xi 3.1 "Unknowned" Error pz



    We are trying to use Live Office XI 3.1 (latest SP and FP) in Excel 2007 to create a single column dataset with approx. 250,000 rows. The file size for this dataset is approx. 12mb and in the CMC we have set the "Maximum Character Stream Size" to 50mb in the Webi Processing Server settings. The process returns a very generic error message stating "An error occurred when refreshing". When we click the "Show Details" button, we get the "unknowned error" message. We have successfully run a much smaller dataset from the same universe.

    Any ideas why the larger dataset would return this error?

    Thanks.

    DB:2.80:Live Office Xi 3.1 "Unknowned" Error pz


    Figured out the answer to this. When bringing in large amounts of data into Excel 2007 from LO, you have to force Excel out of Compatibility Mode when it starts up. If not, Excel 2007 starts up as Excel 2003 and you're limited in the number of rows a LO query can return.

    Thanks.

  • RELEVANCY SCORE 2.80

    DB:2.80:Error Message 1f



    I keep getting "The importer reported a generic error" when importing video that is upside down.

    DB:2.80:Error Message 1f


    I guess you should post your query in Premiere Elements forum instead.

    Thanks

    Andaleeb

  • RELEVANCY SCORE 2.80

    DB:2.80:Generic Extractor Over A Function Module ps



    Hi SDN,

    I have built a generic datasource over a function module and it works. However, when I load into BI, the load stays yellow complaining about 0 source records. I have to manually change the load to green to send data further up into BI.

    The status shows following yellow messages in Monitor:

    Extraction(messages):

    Missing message: Number of sent records

    Missing message: Selection completed

    Transfer (IDocs and TFRC) missing messages or warnings

    Data Package 1: arrived in BW; Processing: Selected number does not agree with transferred number

    Processing and Subsequent update are both green.

    Please advise.

    SM

    DB:2.80:Generic Extractor Over A Function Module ps


    Hi Shahid

    First check out the background job (in the source system in SM37),whether it is finished.

    If it is finished that means the extarction part in source system has been scussessfully completed.

    Then check in SM58 whether is there are any LUW's has been struckedup in TRFC.

    Regards

    Jagadish

  • RELEVANCY SCORE 2.80

    DB:2.80:Acs + Adfs Wont Work When Outside Of Domain zz


    Hi, I'm having some trouble setting up the ADFS 2 ACS to authenticate, it works fine when I'm logged in the domain network but when I am outside of the network I get this error shown bellow.
    We have UAG sat in front of ADFS for external Access, could this be issue?

    ACS20001: An error occurred while processing a WS-Federation sign-in response.
    ACS50008: SAML token is invalid.
    Trade Id: cfeff2e7-4b1f-4ec9-948b-e9fc9afa1773
    I'm not sure why it's not working from outside of the domain network since the message is too generic, this is the message I got from ADFS debug

    Ignoring Invalid entry 'signoutCleanup;https%3a%2f%2fxxx.accesscontrol.windows.net%2fFSS0-XXXAzurehttps%3a%2f%2fxxx.accesscontrol.windows.net%2fv2%2fwsfederationhttps%3a%2f%2fxxx.accesscontrol.windows.net%2fv2%2fwsfederation'
    in signout cookie

    Constructing MSISAppliesTo from custom URI 'microsoft:identityserver:https://xxx.accesscontrol.windows.net/' if applicable

    Constructing MSISAppliesTo from custom URI 'https://xxx.accesscontrol.windows.net/' if applicable

    Initiating search for scope https://xxx.accesscontrol.windows.net/

    Successfully retrieved scope details for scope https://xxx.accesscontrol.windows.net/

    Began processing policy for target: https://xxx.accesscontrol.windows.net/
    Request AppliesTo: https://xxx.accesscontrol.windows.net/
    Using ActAs: false
    Using OnBehalfOf: true

    LDAPAttributeStoreReader: Successfully retrieved 1 attribute(s) for user sAMAccountName=k000000

    Finished processing policy

    Constructing MSISAppliesTo from custom URI 'https://xxx.accesscontrol.windows.net/' if applicable

    Constructing MSISAppliesTo from custom URI 'https://xxx.accesscontrol.windows.net/' if applicable

    Thanks,
    Lucas

    DB:2.80:Acs + Adfs Wont Work When Outside Of Domain zz

    As Bryan mentioned, I would recommend opening a support incident to further troubleshoot this if you are still seeing the issue.
    We will need some more details like the ACS namespace, traceId with timestamp and the fiddler traces to further troubleshoot the issue.
    Also,
    http://www.microsoft.com/en-us/download/details.aspx?id=13789 has a good walkthrough on setting up SSO with ADFS and ACS.

  • RELEVANCY SCORE 2.80

    DB:2.80:The Type Or Method Has 1 Generic Parameter(S), But 0 Generic Argument(S) Were Provided. A Generic Argument Must Be Provided For Each Generic j9


    hello friends
    I have installed Visual studio test edition 2008 in my pc.
    I have cheking some dlls for my project in it but it gives
    Error1Error occured during processing of assembly 'D:\DATA\Test VSTS\Windowmaker.Baroptimisation.Logic.WM.dll': The type or method has 1 generic parameter(s), but 0 generic argument(s) were provided. A generic argument must be provided
    for each generic parameter.TestProject10
    How can i resolved it.
    Please help me for solving this problem because i could not work ahead.

    DB:2.80:The Type Or Method Has 1 Generic Parameter(S), But 0 Generic Argument(S) Were Provided. A Generic Argument Must Be Provided For Each Generic j9

    Hi mithapara,

    I am writing to check the status of the issue on your side. Would you mind letting us know the result of the suggestions?

    If you need further assistance, please feel free to let me know. I will be more than happy to be of assistance.

    Have a nice day!

    Best regards,
    Paul ZhouPaul Zhou [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • RELEVANCY SCORE 2.80

    DB:2.80:Windows - No Disk__Exception Processing Message 0xc0000013 Parameters 0x758f023c0x83a2bdcc 0x758f023 0x758f023c xd



    I have just started getting the error message
    Windows - No Disk
    exception Processing Message 0xc0000013 Parameters 0x758f023C0x83A2BDCC 0x758F023 0x758F023C

    Does anyone have a clue what it means?

    DB:2.80:Windows - No Disk__Exception Processing Message 0xc0000013 Parameters 0x758f023c0x83a2bdcc 0x758f023 0x758f023c xd

    //
    // MessageId: STATUS_NO_MEDIA_IN_DEVICE
    //
    // MessageText:
    //
    // {No Disk}
    // There is no disk in the drive.
    // Please insert a disk into drive %hs.
    //
    #define STATUS_NO_MEDIA_IN_DEVICE ((NTSTATUS)0xC0000013 L)

    This message means no DVD/CD is in the drive. Which program do you try to start? Does it require a CD to be insert?

    "A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

  • RELEVANCY SCORE 2.80

    DB:2.80:Generic Voicemail 37



    Does anyone know how to set the generic voicemail on a iphone 5, as in ' you have reached the voicemail of...' instead of recording your own message?

    DB:2.80:Generic Voicemail 37


    Hi Darina

    You need to do the following:

    Dial 172.
    Press 1 for full personalised greeting.
    Press 1 to record a new greeting.

    When you hear the beep to record your greeting press hash (#) straight away and press 2 to save the changes.

    See how you get on with that and let me know if you have any issues.

    Thanks, Elaine




    Learn all about our new forum, right here .If I've requested details via a private message, please include a link to your thread when sending these over - due to the volume of queries, PMs without a thread link may not be answered. ...

  • RELEVANCY SCORE 2.80

    DB:2.80:Error Generic Host Process For Win32, After I Get This Error Message I Lose My Sound.Please Help Me.I Am Very Frustrated. Microsoft Sent Me A Hotfix But It Didnt Work. mk


    generic host process for win32

  • RELEVANCY SCORE 2.80

    DB:2.80:Consumers Parallel Processing mc


    hi,
    I have a question regarding consumers. Suppose a particular topic has multiple consumers. When a message arrives, do these consumers start processing the message in parallel or one after another.

  • RELEVANCY SCORE 2.79

    DB:2.79:Using A Generic Serviceresult Return Type For Webservices? ja


    We need to implement numerous publicly available services. Let me sayGetStudentsByClass(int classno) and GetStudentName (int id) webmethods.GetStudentByClass returns all student of given class as DataTable and GetStudentName returns just string. Additional service methods may require returning DataSet or any other types. Additionally if there is an error processing service methods, client must be informed with a clear message and releated exception.
    To form a common structure and accomplish my goals, I thought writing a generic bag class (ServiceResult) as service return type of both services.




       [Serializable] 


        public class ServiceResult 


        { 


            public bool Succeed = false; // if service succeeded or not



            public Exception Error = null; // any exception thrown when executing



            public Type ReturnType = null; // Returned object type. eg:DataTable or string



            public object ResultData; // data returned by service



            public int Version;         


        } 


    DB:2.79:Using A Generic Serviceresult Return Type For Webservices? ja

    You are right John :)By switching to soap faults for exceptions and out parameters for other messages,my ServiceResult class became useless.Secondly, I think, its my laziness returning DataTable rather than writing some table wrapper class.I will follow your advice.Thanks for all your helpBest regards

  • RELEVANCY SCORE 2.79

    DB:2.79:Using Generics In Pipeline Components. js


    I've written my own pipeline component to retrieve information about a product outside of commerce server and populate LineItem properties with that information. For data access, I am using a repository pattern that implements c# generics.
    When I run regasm against the assembly, it gives me a bunch of warnings:

    Types registered successfully
    Type library exporter warning processing 'DataAccess.IRepository`1, Data'. Warning: Type library exporter encountered a generic type. Generic classes may not be exposed to COM.
    Type library exporter warning processing 'QuotingServiceClient, Quoting'. Warning: Type library exporter encountered a type that derives from a generic class and is not marked as [ClassInterface(ClassInterfaceType.None)].
    Class interfaces cannot be exposed for such types. Consider marking the type with [ClassInterface(ClassInterfaceType.None)] and exposing an explicit interface as the default interface to COM using the
    ComDefaultInterface attribute.

    Type library exporter warning processing 'Security.IWebSecurity.GetCartsForCustomer(#0), Security'. Warning: Type library exporter encountered a generic type instance in a signature. Generic code may not be exported to COM.
    [etc for a few more types]

    Assembly exported to 'assembly.tlb', and the type library was registered successfully

    When I try to insert the component into a pipeline stage, I can select it, but it says:

    Unable to create component. The following error code was returned : 0x80040154
    Is there a way to get this to work?

    DB:2.79:Using Generics In Pipeline Components. js

    Scotty, you are not going to like the answer, but Generics dont play well with COM. Per

    MSDN , you cannot access Generics DIRECTLY from COM, but you can do it indirectly. Not all the possible solutions are pretty, some are uglier than other. It would be up to you to decide which you implement.
    You can find other ways to implement what you need by doing some searching, but a few options include:
    1. Write your own class/interface that inherits from a generic.
    2. Create an explicit interface and marking it as default.
    3. Depends on what you are trying to accomplish you could use a different object like an ArrayList.
    This is why you have an ISimpleList and an IDictionary in the Commerce Server pipeline.

    Victor O. Castro - Blog - Twitter:
    @vcastro - Work: Commerce Generation -
    LinkedIn

  • RELEVANCY SCORE 2.78

    DB:2.78:Ws-Federation Metadata File For Selfsts1 In Acswithlocalsts Lab Seems To Be Bad ck


    Task 4 in this lab adds two Identity Providers SelfSTS1 and SelfSTS2. The form that defines SelfSTS1 WS-Federation metadata, references the lab file
    Source\Assets\SelfSTS1\FederationMetada.xml- and saving this form results with an error (see below)

    Editing this xml file (to replace http:// with https:// does not solve the problem as processing this corrected metadata file results with a more generic error message - like error processing metadata file. It likely means that the metadata file hash
    is stored somewhere.
    If my analysis is correct, can I get the correct metadata files - as I would really like to finish this lab and use it in my application. It would also be helpful to get the information about how these two STS applications were created.

    Nik

    DB:2.78:Ws-Federation Metadata File For Selfsts1 In Acswithlocalsts Lab Seems To Be Bad ck

    Hello Guy
    I would love to be able to answer your question - but my memory does not nearly reach two years back with such fine grain resolution :-)Nik

  • RELEVANCY SCORE 2.78

    DB:2.78:Query In Biztalk Console af


     
    Hi,
     
    i have a generic orchestration that do some processing base on the content of the message. I track the properties of the message and in HAT, i can build a query that display the value of one property in the message next to the orchestration name.
     
    I would like to do the same thing in Biztalk console.  If i can do this, it would be easy to resume the right orchestration base on the content of the property.  Otherwise, i need to open the suspended orchestration and look at the content of the message to find the right orchestration to resume.
     
    Is there a way to build a query without using the dropdown?  Is it the same syntax as in HAT?
     
    Thank you!

    DB:2.78:Query In Biztalk Console af

    My understanding is the HAT and the Adm.Console use defferent methods to access the data.

  • RELEVANCY SCORE 2.78

    DB:2.78:Transport Of Solution Mgr Generic Data Source Fails xf


    Hi Experts:We created a Generic DataSource on top of a Custom Built Z table . Replicated the DataSource (Solution Manager- DEV) Successfully to BI Dev enviornment. Extarcted data as well. Problem arises when we try to Transport the Generic Data Source from Solution Manager Dev to Solution Manager Prod enviornment.Couple points:1. bExtract Structure is active for the Generic DataSource but activates with Error Message:/b TABL ZOXDEV0024 activated Check table ZOXDEV0024 bEnhancement category/b for table missing bEnhancement category/b for include or subtype missing Table ZOXDEV0024 was checked with warnings2.bTransport Fails from DEV to PROD with following Error/b:Post-import method bRSA2_DSOURCE_AFTER_IMPORT/b started for OSOA L, date and time: 20071210155151bExtract structure ZOXSMD0003 is not active/bThe extract structure ZOXSMD0003 of the DataSource bZDATASOURCE is invalid/bErrors occurred during post-handling bRSA2_DSOURCE_AFTER_IMPORT for OSOA L/bbRSA2_DSOURCE_AFTER_IMPORT belongs to package RSUM/bThe errors affect the following components:bBC-BW (BW Service API)Post-import method RSA2_DSOURCE_AFTER_IMPORT completed for OSOA L,/b date and time: 20071210155152Post-import methods of change/transport request SMDK900294 completedStart of subsequent processing ... 20071210155150End of subsequent processing... 20071210155152Thanks in advance!Rez

    DB:2.78:Transport Of Solution Mgr Generic Data Source Fails xf

    Hi Experts:We created a Generic DataSource on top of a Custom Built Z table . Replicated the DataSource (Solution Manager- DEV) Successfully to BI Dev enviornment. Extarcted data as well. Problem arises when we try to Transport the Generic Data Source from Solution Manager Dev to Solution Manager Prod enviornment.Couple points:1. bExtract Structure is active for the Generic DataSource but activates with Error Message:/b TABL ZOXDEV0024 activated Check table ZOXDEV0024 bEnhancement category/b for table missing bEnhancement category/b for include or subtype missing Table ZOXDEV0024 was checked with warnings2.bTransport Fails from DEV to PROD with following Error/b:Post-import method bRSA2_DSOURCE_AFTER_IMPORT/b started for OSOA L, date and time: 20071210155151bExtract structure ZOXSMD0003 is not active/bThe extract structure ZOXSMD0003 of the DataSource bZDATASOURCE is invalid/bErrors occurred during post-handling bRSA2_DSOURCE_AFTER_IMPORT for OSOA L/bbRSA2_DSOURCE_AFTER_IMPORT belongs to package RSUM/bThe errors affect the following components:bBC-BW (BW Service API)Post-import method RSA2_DSOURCE_AFTER_IMPORT completed for OSOA L,/b date and time: 20071210155152Post-import methods of change/transport request SMDK900294 completedStart of subsequent processing ... 20071210155150End of subsequent processing... 20071210155152Thanks in advance!Rez

  • RELEVANCY SCORE 2.78

    DB:2.78:Book Stuck In "Processing" For 6 Weeks - Should I Upload Again? ma



    My book has been stuck in processing for 6 weeks (since October 6). Repeated e-mails to support have only resulted in a generic "we are experiencing longer than usual processing times." It does not appear that anyone has actually taken a look at my particular situation.

    Should I upload the book again, or will that make things worse?

    Thank you!

  • RELEVANCY SCORE 2.78

    DB:2.78:Generic Delta In Bw 7.0 38



    Hello,

    We have installed new version of BW - 7.0.

    Unfortunately delta extractors which work properly on BW3.5 in old transformation concept does not work on 7.0 in new transformation concept.

    On source system SAP R3 (version 4.7) I have created a custom generic DataSource based on custom DBView (transaction data). To this DataSource I have created generic additive delta based on Timestamp.

    On BW system (version 7.0) I replicated the extractor as DataSource (new). Then I have created an InfoCube and connect it to the DataSource. Then Data Transfer Process was created and I set extraction mode to delta.

    When I execute DTP (with processing mode "Parallel Extraction and Processing") delta queue on source system is not activated and data are not accesible.

    Is anybody on the forum who succeed in custom generic delta in BW7 or I am missing something during creation of the extractor.

    Regards

    DB:2.78:Generic Delta In Bw 7.0 38


    You need to use info package to bring data to PSA or DSO .

    In infi package you must initialise delts and bring data to DSO.

    Then from DSO you must use DTP to the cube as a data mart.

    Ravi Thothadri

  • RELEVANCY SCORE 2.78

    DB:2.78:'' The Importer Reported A Generic Error" 1z



    When i try to replace with after effects composition it apears a message sayng "the importer reported a generic error"

    like the folowing

    there is any solution?

  • RELEVANCY SCORE 2.78

    DB:2.78:Scorecard Set Kpis Error Message 1k



    I am getting this error message when I go to Set KPIs:

    A problem was encountered while processing your request. Please try again later!

    This error message loads within the SSM Admin interface. It seems to be a generic SAP message, as the SAP logo and banner load with the message. There are 'Back' and 'Close' buttons on the error page.

    I thought this might be a Java issue so I bounced Java processes via the SAP MMC, but that did not resolve the issue. I get the error regardless of which Context is selected. Set KPIs was acessible just a few days ago and to my knowledge no system changes have since been made.

    Thoughts/suggestions on resolving this?

    DB:2.78:Scorecard Set Kpis Error Message 1k


    Hi Laura,

    You should make sure that your user, even though you might be set as a Strategy Management administrator, needs to have access to the PAS model metrics.

    This is done through the model connection. If the model connection has an app.server connection specified for everyone, then you have access to the PAS model. Otherwise your user needs to be specified in one of the created App.Server Connections.

    In case there is a security procedure implemented in the PAS model, then the PAS user you assigned to (through the ModelConnection-App.ServerConnection) needs to have the appropriate access rights defined there.

    I would expect that if your user has no rights to the PAS model, or to its metrics, you would get such an error when connecting to this page. You would also find in this case that you would not be able to see the data for this model in the end-user interface, in the Scorecard Tab.

    Hope this helps!

    Ricardo Vieira

  • RELEVANCY SCORE 2.77

    DB:2.77:Service Desk Message Average Processing Time And Totally Processing Time kp



    Dear friends,

    Do you know how to analysis the totally processing time for emssages and average processing time for a message ?

    Is it available in service desk area?

    Best regards,

    Lament

    Edited by: Gates Lament on Feb 9, 2009 9:14 AM

    DB:2.77:Service Desk Message Average Processing Time And Totally Processing Time kp


    Hi,

    We cannot see Process from CRM_DNO_MONITOR, We need to use the structures that hold these data (You refert to the same report).

    Feel free to revert back.

    -=-Ragu

  • RELEVANCY SCORE 2.77

    DB:2.77:Fr: Make All Seam-Originated Internal Facesmessages Optional dj



    Is it possible to make Seam to not produce any FacesMessages with it's internal informations? I've hit some topics on this and AFAIR only way was to "override" default message etc.C'mon - most of our applications are focused on a common user's that don't want to see strange message that "Conversation has expired OR was processing another request OR ..."... Seam even produces a generic "Welcome" message after logging in... What for? Most of these cases are handled by us anyway, with proper redirect or message and the way that Seam tries to put it's low-level, not-meaningful-for-a-common-user messages in every h:messages/ found on a random page is strange. These things should be simply handled by producing a log error on a debug/info level, not jumping into the face of a user... This brings no value at all anyway...Maybe generic configuration parameter that would disable Seam's oververbose h:messaging?Should I fill a FR for this? What do you think?

    DB:2.77:Fr: Make All Seam-Originated Internal Facesmessages Optional dj


    You can override the messages by setting the key to an empty value. Seam-gen generates a messages.properties which has the keys in.But feel free to add an FR if you like.

  • RELEVANCY SCORE 2.77

    DB:2.77:High Memory Usage ,Generic Host Services Win 32. Is There A Fix jd


    I recently got XFINITY internet service. Now I get a message saying high memory usage generic host service win 32. Does this mean my ram memory is not enough ?

    DB:2.77:High Memory Usage ,Generic Host Services Win 32. Is There A Fix jd

    Hi Ben Odtojan,
    To avoid confusion, I would recommend starting your own question so that the community can best focus on your specific issue.

  • RELEVANCY SCORE 2.76

    DB:2.76:Best Pattern For Batch Processing jd



    Hi,

    I'm working in a new BTS solution for batch processing. I will receive a CSV or TXT file with 5k to 15k orders every two hours. I have to process each order, mapping and calling a WCF service.

    Due some business rules (or restrictions), I have to track each order and report it when the process finish, so I want to debatch the message inside orchestration and send it to WCF, but I'm afraid about throttling due the high message volume and the time spend
    by WCF to finish the process (3-5 seconds for each order).

    So, my new idea is to split the main batch into smaller batches and inside it I can finally process each msg. Using this approach I don't find a simple way to aggregate the result for each small batch.

    To finish, I want to create an generic solution. I have 5 customers sending different message types, so I want a general debatch orchestration to split each message, send it to message box and then a specific orchestration will handle the customer
    msg (apply a business rule, etc).

    Can anyone help me with this scenario?

    DB:2.76:Best Pattern For Batch Processing jd

    This requirement gives headache all day long.
    The idea to use SQL Server as a status controller sounds very good.
    I can store a structure like this:
    CorrelationToken | CustomerId | OrderId | Status
    When the counter reaches my 6.753 messages for a specific correlation token, I will return all data in a response message. Do you any article or sample using this approach (or something similar).
    I read your resource dispenser article. Very cool.

  • RELEVANCY SCORE 2.76

    DB:2.76:Message Driven Beans - Next Hop ak


    How can I dynamically retrieve the "next hop" where I want to pass
    along the Message data for processing. In the ejbCreate() method, I
    would like to have a generic piece of code that will set the "next
    hop" (be it another EJB or otherwise) where the message is to be
    processed. That way, I can have a generic MDB, rather than changing
    the code each instance of the MDB to lookup the processing
    information.

    DB:2.76:Message Driven Beans - Next Hop ak

    You could specify the destination for the outgoing message in the MDB's
    deployment descriptors. For instance, you could put this in your
    ejb-jar.xml:

    resource-env-ref
    resource-env-ref-namejms/NextQueue/resource-env-ref-name
    resource-env-ref-typejavax.jms.Queue/resource-env-ref-type
    /resource-env-ref

    and this in your weblogic-ejb-jar.xml:

    resource-env-description
    res-env-ref-namejms/NextQueue/res-env-ref-name
    jndi-nameQUEUENAME/jndi-name
    /resource-env-description

    (Of course, you replace QUEUENAME with the name of the queue, and change
    "javax.jms.Queue" above to a Topic if that's what you want.)

    Then, inside the MDB, rather than looking up the destination queue directly,
    you get it like this:

    InitialContext ctx = new InitialContext();
    Queue destQueue = (Queue)ctx.lookup("java:comp/env/jms/NextQueue");

    The advantage of this approach is that you can have the same Java source
    code for lots of MDBs. However, you still have to change the
    weblogic-ejb-jar.xml for every one that wants to point to another
    destination. You can do this in a script, Makefile, or ant task when you
    assemble the beans, however. This is a fairly common problem and we're
    thinking of better ways to solve it for future releases...

    greg

    "Mike Walsh" mike.walsh2@thehartford.com wrote in message
    news:c7a2f7cd.0209060926.203b77bc@posting.google.com...
    How can I dynamically retrieve the "next hop" where I want to pass
    along the Message data for processing. In the ejbCreate() method, I
    would like to have a generic piece of code that will set the "next
    hop" (be it another EJB or otherwise) where the message is to be
    processed. That way, I can have a generic MDB, rather than changing
    the code each instance of the MDB to lookup the processing
    information.

  • RELEVANCY SCORE 2.76

    DB:2.76:Generic Webapp For Jbpm 7k



    is it possible to create a generic webapp for any kind of process definition? All i want to do is allow processing of the next signal and then let the process definition take care of wht happens next.Similar to what the jbpm-console does. Where can I find the source for that?

    DB:2.76:Generic Webapp For Jbpm 7k


    Yes it's quite possible. I'm busy creating my own JSP webapp, using AppFuse and the JBPM 3.2.1 libraries. Looking at the jbpm-console source code, the JBPM tutorials, various JBoss wiki pages and help from these forums, it's coming on quite nicely.As Ronald mentioned, you can get the source code from CVS.A previous thread (from when I started) should help you get the source:http://www.jboss.com/index.html?module=bbop=viewtopict=114954

  • RELEVANCY SCORE 2.76

    DB:2.76:Generic Host Encounter Problem ks


    Sir
    While i am surfing on internet about 15 minutes one error message shows " GENERIC HOSE PROCESS FOR WIN32 SERVICE HAS ENCOUNTERED A PROBLEM AND NEEDS TO CLOSE, WE ARE SORRY FOR THE INCONVENIENCE"" and my network connectivity freezes. I am using windows XP-2.
    Help me how to sort out this error message.

  • RELEVANCY SCORE 2.76

    DB:2.76:Analytic Workspace Manager Tutorial 7m


    Im a Newbie using DB 11g AWM 11.1.0.7.OB on Windows XP.
    When i try to create a dimension on AWM i get this error:

    The transaction is not committable: "An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::genericCommitRoot
    INI: Unable to parse XML string sent from the client to the server, Generic at XML Parser Errors:
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.

    "
    at oracle.olap.awm.dataobject.dialog.PropertyViewer.doCreateAction(Unknown Source)
    at oracle.olap.awm.dataobject.dialog.CreateDialogHostActionThread.doAction(Unknown Source)
    at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(Unknown Source)

    Please help,
    Kea

    DB:2.76:Analytic Workspace Manager Tutorial 7m

    Im a Newbie using DB 11g AWM 11.1.0.7.OB on Windows XP.
    When i try to create a dimension on AWM i get this error:

    The transaction is not committable: "An error has occurred on the server
    Error class: Express Failure
    Server error descriptions:
    DPR: Unable to create server cursor, Generic at TxsOqDefinitionManager::genericCommitRoot
    INI: Unable to parse XML string sent from the client to the server, Generic at XML Parser Errors:
    Error processing subelement: StandardDimensionAttributeBaseAttributeClassification
    Error processing tag: Classification:
    Error returned by xsOqXmlParserExecute.

    "
    at oracle.olap.awm.dataobject.dialog.PropertyViewer.doCreateAction(Unknown Source)
    at oracle.olap.awm.dataobject.dialog.CreateDialogHostActionThread.doAction(Unknown Source)
    at oracle.olap.awm.ui.dialog.ThreadedDialogActionThread.run(Unknown Source)

    Please help,
    Kea

  • RELEVANCY SCORE 2.76

    DB:2.76:Failed Message Routing - Generic Error Description - Why? pm


    Hi,
    I have developed a custom pipeline component but when it throws an exception, it throws a generic exception description, as follows:
    The Message Engine encountered an error during the processing of one of or inbound messages
    I have 'Failed Message Routing' enabled on my port and an orchestration that subscribes to these failed messages.
    But I'm creating my own custom error description, with information I use further down the process, this custom description gets overwritten by Biztalk somewhere after been thrown.
    Is there a reason for this? And is there a way to work around this?

    DB:2.76:Failed Message Routing - Generic Error Description - Why? pm

    Try changing the scope of your XPathReader to be global (it may close your stream when it goes out of scope). Also usereadOnlySeekableStream.Seek(0, SeekOrigin.Begin);instead ofreadOnlySeekableStream.Position
    = 0;

    There is a lot happening under the covers of these wrapped streams and setting the Position may not account for this.David Downing... If this answers your question, please Mark as the Answer. If this post is helpful, please vote as helpful.

  • RELEVANCY SCORE 2.76

    DB:2.76:Problema Registrazione Dll E Error In Debug Con C# p7


    ciao a tutti ho un problema di una registrazione di dll. in poche parole la registo con Regsvcs (preso da \windows\microsoft.net\framework\v2.0.50727 ) e nel momento della registrazione appare il seguente warning:Type library exporter warning processing.
    Warning: Type library exporter encountered a generic type.
    Generic classes may not be exposed to COM.

    DB:2.76:Problema Registrazione Dll E Error In Debug Con C# p7

    Francesco1984 wrote:

    ciao a tutti ho un problema di una registrazione di dll. in poche parole la registo con Regsvcs (preso da \windows\microsoft.net\framework\v2.0.50727 ) e nel momento della registrazione appare il seguente warning:Type library exporter warning processing.
    Warning: Type library exporter encountered a generic type. Generic classes may not be exposed to COM. WARNING: The assembly does not declare an ApplicationAccessControl Attribute. Application security will be enabled by default.

    Sembra che stai cercando di esportare una classe con un tipo generico (T) verso COM, cosa non possibile.
    Ricordati che quando crei oggetti COM devi farlo con le regole COM.

    Raffaele Rialdi http://www.iamraf.net
    Weblog: http://blogs.ugidotnet.org/raffaele
    Microsoft MVP profile
    https://mvp.support.microsoft.com/profile/raffaele
    UGIdotNET - http://www.ugidotnet.org/
    Raffaele Rialdi [MVP] My articles and videos: http://www.iamraf.net Italian blog: http://blogs.ugidotnet.org/raffaele

  • RELEVANCY SCORE 2.75

    DB:2.75:Generic Article pm



    When and how do we create a generic article?

    DB:2.75:Generic Article pm


    Hi,

    Please refer below link for details

    http://help.sap.com/saphelp_ides/helpdata/en/60/c3af6a05c111d285cf0000e8a4bb0c/content.htm

    Regards,

    JS

  • RELEVANCY SCORE 2.75

    DB:2.75:Message: Generic Host Process For Win32 Services Has Encountered A Problem And Needs To Close. cd


    Please help.  Almost always on star-up, I get a message stating Generic Host Process for Win32 Services has encountered a problem and needs to close.

  • RELEVANCY SCORE 2.75

    DB:2.75:&Amp; In An Insert Statement 8s


    I am trying to insert 'Generic JS Notification' into the name column of the table. This is my statement, Because of I get enter value notifications.
    To avoid that I changed to chr(38). It inserts the row, but it inserts chr(38) instead of , what should be my insert statement to insert (Generic JS Notification')
    into a column of a table.

    Thanks I will appreciate all the help, here are my results.

    INSERT INTO ta_wf_notifications_tab(name,subject,message,details)
    values('Generic JS Notification');

    Enter value for s:
    old 2: values('Generic JS Notification')
    new 2: values('Generic J Notification')
    values('Generic J Notification')
    *
    ERROR at line 2:
    ORA-00947: not enough values

    INSERT INTO ta_wf_notifications_tab(name)
    values('Generic J''||chr(38)||''S Notification');

    1 row created.

    SQL select name from ta_wf_notifications_tab;

    NAME
    ----------------------------------------------------------
    Generic J'||chr(38)||'S Notification

    Rajan

  • RELEVANCY SCORE 2.75

    DB:2.75:Generic Equivalent To Integer.Tryparse, Doubletryparse, Etc mf


    Hello all,I am trying to create a generic class. Part of the processing will involve parsing a delimited list of strings. They list will contain valid integers, doubles, etc. If this was not generic, I would use the TryParse methods to intantiate variables. How would I do this in the context of generics, since there is no T.TryParse. Thanks in advance for any ideas and/or suggestions!

    DB:2.75:Generic Equivalent To Integer.Tryparse, Doubletryparse, Etc mf

    Hello Reed and Vladimir,Thanks to both of you for your helpful comments. I am incorporating parts of each of your answers into my code. You both hang out on the Designer forum as well soI thought you might findthis enhancement request interesting.Add ToolboxTabAttribute: https://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=523893wa=wsignin1.0

  • RELEVANCY SCORE 2.75

    DB:2.75:Voicemail Setup x7


    Hi

    I'm currently trying to set up my voicemail on iPhone 4S with a generic "the vodafone customer you are calling cannot take your call please leave a message" etc...

    I don't want a personalized greeting with my voice. How can I just get a generic message??

    DB:2.75:Voicemail Setup x7

    This is ridiculous trying to get a customer service agent to help !!

  • RELEVANCY SCORE 2.75

    DB:2.75:Generic Network Failure dc



    HTC DESIRE cant not recieve MMS. I done what operater said with the apn settings and i still can't download a picture, a message comes up everytime i press download as ''generic network failure''....If anyone has answers please help, thanks.

    DB:2.75:Generic Network Failure dc

    Hi Sammy, When you are sending the MMS do you have the internet or Wifi enabled on your phone? You need to ensure that only mobile data is enabled. If you click on the link in the above post it will advise of the internet settings. Once you have the correct settings could you send yourself an MMS and let me know what happens. Grainne



    _______________________________________________________ Help Support Home Page | Forum TC's - Please read | Meteor web-chat: 9AM - 11PMUnsolicited PMs will not be answered, use our 'Search Bar'' in the top right hand corner, your question may already have been answered but if not, drop a post on a relevant thread, or set one up yourself.The forum is moderated from Monday-Friday - 9AM-5PM.

  • RELEVANCY SCORE 2.75

    DB:2.75:Is-Retail So Processing With Generic Articles ff



    Hi

    We are implementing IS-Retail ECC6.0 in which require to process sales order with generic article for DC sale.

    Is there way to explode varients article in Sales order by putting generic article code like we do in purchase order processing.

    Sandip

    DB:2.75:Is-Retail So Processing With Generic Articles ff


    Hi ,

    Change the Item Category group Maintained in the Article Master from NORM- Standard item to SAMM-Generic item.

    And for the Particular Generic Material you will be able to get the variants in Sales Order Level.

    Regards,

    Sarosh

  • RELEVANCY SCORE 2.75

    DB:2.75:Mq - Jms : Weblogic Throwing Javax.Transaction.Heuristicmixedexception zf


    Hi

    I have a partner who is facing an issue, seek your inputs in this regard.

    The application uses MQ for message processing. The application has Weblogic transaction manager implemented for both receiver and sender part with two-phase commit logic between MQ-binded JMS and database. The receiver receives a message from an external queue and sends the message to other external queue after some processing. This is implemented to ensure correct message flow without any failure/duplicity as the MQ and database entries should get committed or rolled back, when the processing is successful or failed respectively.

    During the application restart , javax.transaction.HeuristicMixedException is thrown. All the messages except two were processed successfully. On investigation it's found that these two messages was just stuck in processing status in database, but was pushed to the MQ queue. However, the application was running fine after that and later the same messages were picked up again and re-processed. No other error/exception is logged except below stack trace :

    WSATGatewayRM_AdminServer_LUCM_TXN},NonXAResources={})],CoordinatorURL=AdminServer+10.237.252.77:27025+LUCM_TXN+t3+): javax.transaction.HeuristicMixedException: (BANCS_EAI_TXN_DataSource_LUCM_TXN, HeuristicHazard, ())
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:305)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
    at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:500)
    at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
    at weblogic.ejb.container.internal.NewJMSMessagePoller.processOneMessage(NewJMSMessagePoller.java:257)
    at weblogic.ejb.container.internal.NewJMSMessagePoller.run(NewJMSMessagePoller.java:121)
    at weblogic.ejb.container.internal.NewJMSMessagePoller.timerExpired(NewJMSMessagePoller.java:204)
    at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    They have two queries with regard to the issue:
    1.) What is the exact causal of the exception as the error looks very generic?
    2.) How come the MQ entry got committed and not the database, which is not as per two-phase commit logic ?

    Application environment details :
    Weblogic : 10.3.1.0
    Database : Oracle - Release 11.1.0.7.0

    Thanks and regards

    Anil

    DB:2.75:Mq - Jms : Weblogic Throwing Javax.Transaction.Heuristicmixedexception zf

    Ideally, shouldn't the weblogic transaction manager rollback the transaction.Normally yes. The problem could be on the MQ or the WL side. It could also be application specific if you're not using a standard/supported method for making sure MQ participates in WL transactions.

    Thoughts:

    - I think you should raise the Bug with support, and ask for a transaction expert to take a look.

    - How does the application ensure that the MQ sender participates in the WL MDB's CMT?

    - Are web-services somehow involved? If so, you might want to try post to the web service forum. The stack trace has the word "WSATGatewayRM_AdminServer_LUCM_TXN". I'm not familiar with web-services, but thought that WS-AT support came after 10.3.1. Perhaps WSAT stands for something other than "web-services AT".

  • RELEVANCY SCORE 2.75

    DB:2.75:Recorded For Outbound Processing 87



    Hi

    I am working on SOAP to Proxy scenario in PI 7.1 Version, a test message has been triggered from SOAP and message has received the PI

    I can see the message in SXMB_MONI and status shows as Recorded for Outbound processing,

    Cananyone tell me what does it mean Recorded for Outbound processing

    Thanks

    PR

  • RELEVANCY SCORE 2.74

    DB:2.74:Adware Generic Che 9m


    What is Adware Generic CHE? I scan my Dimension 4550 daily using AVG Free edition. Recently, every day I will get a message indicating that WINDOWS\SYSTEM32\cdn.dll was infected by Adware Generic CHE. Yet, my PC seems to work fine. Any comments/advice?

    DB:2.74:Adware Generic Che 9m


    ktmgurl

    i only use the basic [free] edition of Ad-Aware.... which should *not* be automatically monitoring things on start-up, warning you about registry changes.

    so either:
    1) you're talking about an upgrade/paid version of ad-aware, with which i'm not familiar. or
    2) you're talking about another program... such as Microsoft Anti-spyware Beta, or the TeaTimer feature of Spybot.

    had you just done a Windows Update [or done any other installation] which indicated the need to reboot, in order to complete that installation? if so, it's likely that the registry changes being implemented, and files being added/copied, were a continuing part of that installation process.... and by blocking them, the installation is now "incomplete" (or "corrupted"). it that's what it is, then [assuming you still have internet access] you can try to do the Windows update [or other installation] again, to allow it to complete.

    aside from that suggestion, without more details [which particular registry entries were being changed, what particular files you decided to block], it's very difficult for me to advise you.

  • RELEVANCY SCORE 2.74

    DB:2.74:Generic Host Error. 9k


    from a couple of days i have been receiving this error message- Generic host error for win32. i have installed the updates as suggested by the MS website but it continues to be there. someone please help me out.

    DB:2.74:Generic Host Error. 9k

    from a couple of days i have been receiving this error message- Generic host error for win32. i have installed the updates as suggested by the MS website but it continues to be there. someone please help me out.

  • RELEVANCY SCORE 2.74

    DB:2.74:Generic I/O Error ??? 37



    Hi

    Whenever i try to open a VI i'm getting a message as "generic I/O error.Not a valid LabVIEW file".The VI is very important.is there any way to recover or repair the VI?

    DB:2.74:Generic I/O Error ??? 37


    Hi swathi,

    no need to cry!

    But you should say "it was a VI"

    And pick up your backup. Or start to backup regularly right now!




    Best regards,GerdWCLAD, using 2009SP1 + LV2011SP1 + LV2014f1 on WinXP+Win7+cRIOKudos are welcome

  • RELEVANCY SCORE 2.73

    DB:2.73:Populating Error Status Message In Outbound Idoc d9



    Hello,

    Could you pls. help me with the following:

    I am looking for a general BADI/User-exit for outbound IDocs where I can populate error message in the status segment of IDoc based on certain condition. By this I want the IDoc to fail and later reprocess it when the error condition is resolved.

    I do not want to code this in each and every user-exit for each IDoc type. So if there is a generic exit which is called during outbound processing of all IDocs then it will be helpful to my cause.

    Thanks.

    Best Regards,

    Gajendra.

  • RELEVANCY SCORE 2.73

    DB:2.73:I Get An Error Message That Says, Generic Host Procedure For Win32 Has Encountered A Problem. m7


    How can a keep this erroe box from popping up repeatedly. It says- Generic Host Procedure for Win32 has encountered a problem.

    DB:2.73:I Get An Error Message That Says, Generic Host Procedure For Win32 Has Encountered A Problem. m7

    Hi RB Swersky,
    1. Did you make any changes prior to the issue?
    2. When exactly do you get the message?
    3. Is it at the system startup or downloading/installing something?
    Please provide us more information about the issue, so that we can assist you better.
    Check if any of the following articles helps you in fixing the issue.
    1. See Generic Host Process Error Message and a Flashlight Icon Appear
    2. See Generic Host Process for Win32 Services has encountered a problem and needs to close.

    Visit our
    Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.73

    DB:2.73:Rsbk257 78



    we are using the retail solution and loading from variants to generic articles. In other words we are loading 0MATERIAL to 0MATERIAL and update a first date field in a generic article that is only maintained on the variant level .

    Do do that we loop through 0MATERIAL and in the end we delete most of the source package as we only need to update a small portion of 0MATERIAL. While this is working in DEV and TST we now get and error in PROD when we execute the DTP.

    Error is:

    Exceptions in Substep: Start Routine

    and

    Processing Terminated

    with the message for the node

    Data package 1 / 10/21/2009 13:11:36 / Status 'Processed with Errors'

    RSBK257

    As I mentioned: the activation is fine, a check of the start routine is fine [and the START routine is working in DEV and TST];

    master data is available, as all variants point to their generic article.

    Any hint is greatly appreciated.

    OSS notes 1223532 and 1180163 are rather pointing to records created in the START routine but not deleted,

    DB:2.73:Rsbk257 78


    we are using the retail solution and loading from variants to generic articles. In other words we are loading 0MATERIAL to 0MATERIAL and update a first date field in a generic article that is only maintained on the variant level .

    Do do that we loop through 0MATERIAL and in the end we delete most of the source package as we only need to update a small portion of 0MATERIAL. While this is working in DEV and TST we now get and error in PROD when we execute the DTP.

    Error is:

    Exceptions in Substep: Start Routine

    and

    Processing Terminated

    with the message for the node

    Data package 1 / 10/21/2009 13:11:36 / Status 'Processed with Errors'

    RSBK257

    As I mentioned: the activation is fine, a check of the start routine is fine [and the START routine is working in DEV and TST];

    master data is available, as all variants point to their generic article.

    Any hint is greatly appreciated.

    OSS notes 1223532 and 1180163 are rather pointing to records created in the START routine but not deleted,

  • RELEVANCY SCORE 2.73

    DB:2.73:Could Not Updata Data In Psa Table From Datasource In Bi 7.0 sf



    Dear friends,

    I am working in BI 7.0 , I have created generic data source for table mara and

    i have replicated it in BW , I have created InfoPackage for datasource and i have tried to load data to PSA table from Datasource, but i could n't able to upload data to PSA table ,

    In monitor i am getting the error message

    Extraction error occured 386 send(0record received)

    ' Processing (data packet) error occured'

    inbound processing 0 records : missing message

    Please give me solution to solve this issue

    DB:2.73:Could Not Updata Data In Psa Table From Datasource In Bi 7.0 sf


    Hi Sirisha,

    I have checked the records in RSA3, data is there,

    I Can able to see data in Rsa3,but i am not able to transfer data to PSA table

    Please help me ya

    Thanks,

    D.prabhu

  • RELEVANCY SCORE 2.73

    DB:2.73:Dvr Scheduler d8


    I have tried a few times and can not get the feature to work. I get a generic error message.

    DB:2.73:Dvr Scheduler d8

    I have tried a few times and can not get the feature to work. I get a generic error message.

  • RELEVANCY SCORE 2.73

    DB:2.73:Generic Pdf Parser Error 17



    Sent: 11/25/14

    Happy Thanksgiving!

    Is there a solution to this Photoshop error: "There was an error processing the document. The file may be damaged or corrupted."

    DB:2.73:Generic Pdf Parser Error 17


    Hi, Gene. Thanks so much for your prompt reply.

    All these ( other) pdf's open fine with Adobe Reader. It's just when I try to open them in Photoshop 7 that I get the error. This used to happen only occasionally, starting earlier this year (no issues last year that I recall). Now PS7 returns that error with every pdf I try to open. I've read this tends to happen when the pdf is created in a newer program. I have no idea about this, but others on our staff have been able to open the same files with CS2, so I'm downloading the installation files for that now. (Used to use CS2, but went back to PS7 when I got a new machine as I have the DVD for that and wasn't aware of these issues with PS7. Will let you know if this works.)

    Thanks again!

  • RELEVANCY SCORE 2.73

    DB:2.73:Paypal Not Processing Payment as



    Hello all, i hope someone can help me. i keep getting this error message when trying to pay for an item on ebay;

    "Your request could not be processed at this time

    We were not able to process your payment.

    Please check out again and try a different credit card or bank account for your PayPal payment. If you're still having problems, contact PayPal customer support.

    Error code #10486"

    i have sent an email to paypal, but seemed to have recieved a generic reply prompting me to call them on the phone, which i am not going to do due to costs. I purchased something last week and all was fine, has anyone any idea how to resolve this issue?







    Solved!
    Go to Solution.

    DB:2.73:Paypal Not Processing Payment as


    Many thanks kernowlass, changing the browser seemed to have worked.

  • RELEVANCY SCORE 2.73

    DB:2.73:Pst Capture Fails With 0xc004ab16 pj


    Trying to transfer a 7GB PST back into an Exchange account for Online Archive processing. PST Capture gets about 1/3 of the way through the process (this takes 3 hours to get to this point) and then fails with the error message Import error: Exception
    from HRESULT: 0xC004AB16. The only thing I can find online about this refers to PST Capture's inability to transfer Junk E-mail folders. There is no Junk E-mail folder in this PST. How can I locate the offending message/folder? PST Capture doesn't seem
    to log anything. It's a very generic error message.

    Great tool by the way!

    TIA

    DB:2.73:Pst Capture Fails With 0xc004ab16 pj

    Copy it back a folder or range of messages at a time until you can locate the corrupt message.Ed Crowley MVP There are seldom good technological solutions to behavioral problems.

  • RELEVANCY SCORE 2.73

    DB:2.73:Getting "Generic Error" When Linking Clips. Generic Not A Helpful Word. sd



    Getting "generic error" when linking clips. Generic not a helpful word.

    DB:2.73:Getting "Generic Error" When Linking Clips. Generic Not A Helpful Word. sd


    Zero information also does not allow anyone here try to help

    More information needed for someone to help... please click below and provide the requested information

    -PPro Information FAQ http://forums.adobe.com/message/4200840

  • RELEVANCY SCORE 2.73

    DB:2.73:Error In Mr90 "No Messages For Initial Processing Exist". 9d



    Hello

    While doing testing (genertaing invoice output through MR90) in Quality system I got the message "No messages for initial processing exist". Same testing was successful in Development client. I hvae checked the settings and all seems ok. Can you provide some guidnace?

    I had changed the MEM3 settings for message type REKL (invoice reduction/incretion) to generic PDF printer. Earlier REKL was pointed to a specific printer which Basis was discarding.

    thanks
    Vikram

    DB:2.73:Error In Mr90 "No Messages For Initial Processing Exist". 9d


    Check the all setting with comparing development client.

    If you development system is working fine, but production client doesn't.

    Then there are must be some setting is done after moving the TR.

    First compare the all setting for production with regards to development.

    Then also check the TR is successfully moved or not?

  • RELEVANCY SCORE 2.72

    DB:2.72:Generic Host Process mm



    I keep getting a message, "Generic Host Process for Win 32 Services has encountered a problem and needs to close," about 15 minutes after I start my computer. At that point, everything locks up and I have to turn the computer off. Any advice?

    DB:2.72:Generic Host Process mm


    You might read information on this link to see if it helps you.

    Clickable Link

  • RELEVANCY SCORE 2.72

    DB:2.72:N70 Generic Firmware? kx


    If I update my N70 to a generic rather than the Three firmware, will I lose all my message centre and internet connection, etc?

    DB:2.72:N70 Generic Firmware? kx

    Your settings can be directly sent to you from the setup option under settings on nokia.co.uk. You can then enter your phone model, network etc and then they will be directly sent to your mobile.

  • RELEVANCY SCORE 2.72

    DB:2.72:Cannot Select From A Type Variable. 8c


    I have the following static method that generates the "Cannot select from a type variable" message:

    public static T String somefunction()
    {
    ClassT c = T.class;
    ...
    }

    It would be nice to be able to access the Java class information of a generic to perform processing without having to workaround this by having to introduce a class parameter as follows:

    public static T String somefunction(ClassT theClass)
    {
    ClassT c = theClass;
    ...
    }

    Are there any plans for adding this?