• RELEVANCY SCORE 5.36

    DB:5.36:3620 Bootstrap Update j1





    Hello,

    I Have a Problem with an 3620 IOS 12.2.29 and a Bootstrap 11.1.(17)AA. There is a known Bug CsCdj91818 wich describe my Problem !!!

    So, but how can I get / download the Bootstrap 11.1(19)AA and Update the Bootstrap ?

    DB:5.36:3620 Bootstrap Update j1


    Hi,

    The ROMMON or bootstrap is a physical chip that must be replaced on the motherboard, its probably best speaking to Cisco TAC about this one.

    HTH

    PJD

  • RELEVANCY SCORE 3.85

    DB:3.85:How To Update Aspire 3620 9f




    which updates do i need for the apire 3620

    DB:3.85:How To Update Aspire 3620 9f

    which updates do i need for the apire 3620

  • RELEVANCY SCORE 3.45

    DB:3.45:Networker No Bootstrap 1z




    Hi All,I have used Networker 7.3.2 Jumbo update-1 on Windows 2003.When I start group and run to finish, which it has write index, save set but no bootstrap?.Why it don't wrote bootstrap?. (no used pool index)Thanks.Suwan

  • RELEVANCY SCORE 3.23

    DB:3.23:Lost In Ios Versions 8a



    Hi

    I wanted to upgrade my Cisco 3620 (R4700) and 2611 (MPC 860) routers to the minimal supported IOS Release for installing SDM 2.3.1. I am stuck with quite a few queries in this regard:

    1. Release Notes for SDM lists supported models as Cisco 2611XM and Cisco 3620.

    Is 2611XM different from mine - 2611(MPC 860)?

    ------------------------------------

    'Sh Ver' on 2611 enlists he following details:

    IOS TM C2600 Software (C2600-IS-M) R 12.2(2)T1

    ROM Bootstrap v 11.3(2)XA4 FC1

    Cisco 2611 (MPC860) Processor, 61440/4096 bytes memory.

    "Sh Flash" depicts the following:

    C2600-is-mz.122-2.T1.bin

    --------

    Now, when I go to download IOS Release 12.4.4T listed for platform 2610XM-2611XM, it gives me varios options to choose software feature sets, for example:

    ADVANCED ENTERPRISE SERVICES WITH SNA SWITCH

    ADVANCED IP SERVICES

    ADVANCED SECURITY

    ENTERPRISE BASE

    ENTERPRISE BASE W/O CRYPTO etc..etc..etc.

    What should I choose and what all am I licenced for?

    Same is the case with my 3620.

    "Sh flash", tells me that my image file is: c3620-i-mz.122-5d.bin.

    On this router series, the last supported IOS Release is : 12.3.19(GD)

    Available for various options, Which one should I choose to download??

    Options include:

    ENTERPRISE BASIC

    IP

    IP PLUS

    IP/FW/IDS

    IP/FW/IDS PLUS IPSEC 3DES BASIC NO ATM

    etc..etc..etc.

    Which one should I choose?

    Please Advise!!

    Rgds

    DB:3.23:Lost In Ios Versions 8a


    Thanks for the reply Amit.

    Section 4 (migration guide of the suggested link)does related the migration path for my current 2600 image "c2600-is-mz" to be replaced with "C2600-ipvoice-mz".

    There is nothing listed whether IOS v 12.3 is supported on my 3620 whose current image is:c3620-i-mz.122-5d.bin.

    Also: There one minor confusion which arose after glancing through the Table 1 of Section 3 which states that

    ---------------------------------------------

    "The following platforms do not support Cisco IOS Packaging in Release 12.3: Cisco 1720, Cisco 2600 non-XM, and the Cisco 3600 Router Series"

    ---------------------------------------------

    Two of the unsupported 12.3 platforms are excatly mine, Cisco 2600 non-XM and 3600.

    Still slightly confused there.

    Pls Advise!!

    EDITED::

    I just read the link here:http://tinyurl.com/hshtb

    and it says the 12.3 supports both Cisco 2611 and 3620.

    I got the migration path for 2611 from the earlier link you provided, please advise on the 3620 migration path from current "c3620-i-mz.122-5d.bin", or relate the document as despite considerable effort, I have failed to find it.

  • RELEVANCY SCORE 3.11

    DB:3.11:Bootstrap Process Failer kz


    can someone hlep me wiith this error message: Bootstrap process failer

    DB:3.11:Bootstrap Process Failer kz

    Your question is
    a) more suitable for the Database-General forum
    http://forums.oracle.com/forums/search.jspa?threadID=q=ORA-00704objID=f61dateRange=alluserID=numResults=15
    General Database Discussions
    b) incomplete, there should be more than only that error.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e0.htm#sthref384
    Always post all (full) error messages including the error code.

  • RELEVANCY SCORE 3.02

    DB:3.02:R2 Signalling In 3620 8d



    Hi,

    I have 3620 with 1FE-2CE1 B/U and NM-30DM.It is not working with R2 signalling.Is there any option to make this active with E1 R2 signalling (Erricson).However it works on PRI.Plz help and oblige in this regard.

    DB:3.02:R2 Signalling In 3620 8d


    Try going through this: http://www.cisco.com/warp/public/788/signalling/e1r2config.html#sixth

  • RELEVANCY SCORE 2.97

    DB:2.97:Does Anyone Know Whether The Dram In Cisco 25xx/26xx Can Be Placed In 3620? 8m



    Does anyone know whether the DRAM in Cisco 25xx/26xx can be placed in 3620?

    Many thanks!

    DB:2.97:Does Anyone Know Whether The Dram In Cisco 25xx/26xx Can Be Placed In 3620? 8m


    For the 2500: no way to use them in a 3600.

    As far as I can tell, the memories from the 2600 cannot be used in the 3600 and vice-versa. Can you tell us exactly which memory SIMMs you want to use ?

  • RELEVANCY SCORE 2.91

    DB:2.91:Must I Pay Dmxzone To Update Bootstrap In Dreamweaver? 38


    PleaseThe latest version of Dreamweaver CC (2014) boasts of its inclusion of Bootstrap but it is an old 2.x version. Exchange Manager prompts me to update but I am transferred to DMXzone and asked to put it in my cart for purchase. I'm experiencing more than a little cognitive dissonance because Bootstrap is open source and I don't want to believe Adobe adds older versions and requires payment to use up-to-date freeware through "third-party" for-profit entities.ThanksRichard

  • RELEVANCY SCORE 2.90

    DB:2.90:3620 As A Vpn Choke Router ks



    Hi all,

    Can someone privide a basic config required to make a 3620 a VPN choke router? I have a 7200 sitting behind it and want to only allow IPSec through.

    Thanks in advance,

    Best Regards,

    Jerry Roy

    DB:2.90:3620 As A Vpn Choke Router ks


    Hi,

    I have done that already it only gives the IP address. I need to also get the routers hostname, is there a way to get the router to send its hostname via syslog?

    Thanks,

    Jerry

  • RELEVANCY SCORE 2.86

    DB:2.86:Wic-1adsl With Older 3620 Router f7



    I received a phone call from a customer, they tried the following images and 3620s don't see the WIC-1ADSL. She had opened a TAC case, the image they sent her (12.3(9a)) didn't show the WIC-1ADSL either. She tried multiple ADSL cards in multiple routers and stated none recognized the WICD-1ADSL card was inserted. Maybe she is doing something wrong? I'm assuming a show ip int brief would show a new interface for her. I'm not onsite and thinking something simple is wrong.

    IP Plus (ie c3620-is-mz.123-10.bin)

    12.2T image (iec3620-is-mz.122-15.T14.bin)

    Software Support

    The ADSL feature is supported in the IP/ADSL Image ("y7" image) for the Cisco 1700 Series. Cisco 2600/3600/3700 series routers require a PLUS IOS image for ADSL if using 12.2T. From 12.3 Mainline and beyond ADSL WIC support is available in the "IP Base" feature set. Some QoS features require an advanced image (IP PLUS, IP VOICE, or above) for Cisco 1700/2600/3600/3700 series router support.

    Note: WIC-1ADSL is only supported with the following platforms Cisco 1720, 1721, 1751, 1760, 2610-51, 2610-51XM, 2691, 3620, 3640, 3640A, 3660, 3725, and 3745

    Cisco 1700/2600/3600/3700 Series 1-Port ADSL WICs

    http://www.cisco.com/en/US/products/hw/routers/ps221/products_data_sheet09186a0080088713.html

    Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3620-J1S3-M), Version 12.3(9a), RELEASE SOFTWARE (fc4) Copyright (c) 1986-2004 by cisco Systems, Inc. Compiled Fri 23-Jul-04 04:38 by kellythw Image text-base: 0x60008B00, data-base: 0x61994000 ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f c1) hdsoutel-pcm-r36 uptime is 4 minutes System returned to ROM by power-on System image file is "flash:c3620-j1s3-mz.123-9a.bin" cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory. Processor board ID 17652431 R4700 CPU at 80MHz, Implementation 33, Rev 1.0 Bridging software. X.25 software, Version 3.0.0. TN3270 Emulation software. Basic Rate ISDN software, Version 1.1. 2 Ethernet/IEEE 802.3 interface(s) 1 ISDN Basic Rate interface(s) DRAM configuration is 32 bits wide with parity disabled. DRAM configuration is 32 bits wide with parity disabled. 29K bytes of non-volatile configuration memory. 32768K bytes of processor board System flash (Read/Write) 16384K bytes of processor board PCMCIA Slot0 flash (Read/Write) Configuration register is 0x2102

    DB:2.86:Wic-1adsl With Older 3620 Router f7


    True,

    Generaly any nm witch has an fe and 2w will do the job.

  • RELEVANCY SCORE 2.79

    DB:2.79:Please Consolidate Oliver Pabst Publications. cd


    DB:2.79:Please Consolidate Oliver Pabst Publications. cd

    Hi Werner,
    Thank you for your information. We will look into this issue and make necessary changes soon. Please check back later. We appreciate your continuous feedback and support.
    Best,
    Academic Search Feedbac Team

  • RELEVANCY SCORE 2.78

    DB:2.78:Security Update For Sql Server 2005 Service Pack 2 (Kb948109) In Windows Update px


    I am also having trouble getting this update to complete correctly. The automatic update is retrying the install repeatedly.
    I have posted my summary.txt file from %programfiles%\Microsoft SQL Server\90\Setup Bootstrap\Log\Hotfix below.
    The problem seems to be the Workstation Components, Books Online and Development Tools.
    Does anyone know how to fix this?
    Robert
     
    Microsoft SQL Server 2005 9.00.3042.00 ============================== OS Version      : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time            : Wed Feb 13 22:43:32 2008  Machine         : MR-RIGHT Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_SQLSupport_1.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : Microsoft SQL Server Native Client Product Version : 9.00.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : Microsoft SQL Server VSS Writer Product Version : 9.00.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_SqlWriter_1.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : MSXML 6.0 Parser (KB933579) Product Version : 6.10.1200.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_MSXML6_1.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_SQLSupport_2.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : Microsoft SQL Server Native Client Product Version : 9.00.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : MSXML 6.0 Parser (KB933579) Product Version : 6.10.1200.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_MSXML6_2.log -------------------------------------------------------------------------------- Machine         : MR-RIGHT Product         : Microsoft SQL Server 2005 Express Edition Product Version : 9.2.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_SQL.log -------------------------------------------------------------------------------- Machine         : MR-RIGHTProduct         : Workstation Components, Books Online and Development ToolsWarning         : Warning 28123.Warning: SQL Server Setup cannot install this feature because a different edition of this feature is already installed. For more information, see 'Version and Edition Upgrades' in SQL Server Books Online.--------------------------------------------------------------------------------Machine         : MR-RIGHT Product         : Microsoft SQL Server 2005 Tools Express Edition Product Version : 9.2.3042.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0002_MR-RIGHT_Tools.log --------------------------------------------------------------------------------   Setup succeeded with the installation, inspect the log file completely for status on all the components.
    Time            : Wed Feb 13 22:45:56 2008

    DB:2.78:Security Update For Sql Server 2005 Service Pack 2 (Kb948109) In Windows Update px

    Jonathan, thanks for your reply.
     
    I realized I had a version of SQL Server Compact Edition installed. When I removed Compact Edition and updated the SQL Server Books Online, I was able to get the patch installed.
     
    I confirmed the patch is installed by listing the programs in the Add or Remove Programs applet with the Show updates box checked.
     
    The issue I still have is that the automatic update icon continues to show in the systray. The system does not recognize that the update has successfully completed.
     
    Robert

  • RELEVANCY SCORE 2.78

    DB:2.78:3620 Router pk



    Hello,

    Is the card WIC 1T on router 3620 support a rate of 4Mbps and if it is compatible with a V35 interface?

    thanks

    DB:2.78:3620 Router pk


    Hi

    Your configuration in the earlier post is fine

    interface Serial0/0

    ip address 10.0.70.109 255.255.255.252

    encapsulation ppp

    bandwith 2048

    In case if both the connecting routers are cisco , you can go for " encapsulation hdlc " also , which is by default in cisco devices.

    Hope this helps

    regards

    vanesh k

  • RELEVANCY SCORE 2.78

    DB:2.78:3620 Pri Not Passing Any Traffic.. x3



    Hi all

    Today my 3620 PRI stopped answering the pri t1 calls. I had to reload it to start functioning again. My 3620 has a t1 pri connected to verizon wireless and a ethernet connection to my DMZ which holds the web server. I would like to know if anyone had this problem before or is it a bug i am hitting on. I am running 12.2.12a code. attached is the sh ver output.

    ------------------ show version ------------------

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-I-M), Version 12.2(12a), RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-2002 by cisco Systems, Inc.

    Compiled Tue 24-Sep-02 00:21 by pwade

    Image text-base: 0x60008930, data-base: 0x60A08000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    as-syr3620a uptime is 10 hours, 17 minutes

    System returned to ROM by reload

    System restarted at 09:46:38 EST Wed Feb 19 2003

    System image file is "flash:y"

    cisco 3620 (R4700) processor (revision 0x81) with 45056K/4096K bytes of memory.

    Processor board ID 15619969

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    MICA-6DM Firmware: CP ver 2730 - 5/23/2001, SP ver 2730 - 5/23/2001.

    Bridging software.

    X.25 software, Version 3.0.0.

    Primary Rate ISDN software, Version 1.1.

    1 FastEthernet/IEEE 802.3 interface(s)

    24 Serial network interface(s)

    24 terminal line(s)

    2 Channelized T1/PRI port(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    16384K bytes of processor board System flash (Read/Write)

    16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)

    Configuration register is 0x2102

    -----

    I also like to know , if there is any dropping off calls, or line not answered (in my t1 controller) , can be proactively managed throught a management console. I am already directing my logging traffic to a syslog server. Can you people recommed how and what looging need to be turned on to monitor the above mentioned.

    any help is appreciated.

    Thanks

    Senthil Natarajan

    DB:2.78:3620 Pri Not Passing Any Traffic.. x3


    Need to know that status of PRI line when it stops answring the calls. You need to issue command "show isdn status" to see layer 1,2 and 3 status. Now also need to know "sh controller T1" to see any physical layer issue it may have.

    Now if the users are complaining about the calls are getting dropped prematurely, then you need to start troubleshooting it. I do know that you want to do it proactively but its difficult to see the possible problem if it dosn't appear with pattern.

    Anyway following debug will help,

    debug isdn q931

    debug ppp nego

    debug modem csm

    debug modem

    debug ppp auth

  • RELEVANCY SCORE 2.75

    DB:2.75:What Exactly Is The Term "Bootstrap" 9c


    Can somebody provide a clear explanation to what "bootstrap" means?

    DB:2.75:What Exactly Is The Term "Bootstrap" 9c

    Sure. I'll avoid java and just blab about the problem in general.

    All computers are designed with some ability to be started at a particular memory address. If there are no instructions in that memory located, well, the computer won't get very far.

    Alternatively you could type in - somehow - a very large program. In fact, to do very much - say read from a disk - you might have to type in an awful lot. No fun.

    So a challenge is to write a very small amount of code so the computer can start, and have that code load a larger amount of code and jump into it. That's bootstrapping.

    A few other random notes:

    o Most, if not all, computers are designed so that the lowest level of bootstrap is stored somewhere in read-only memory - no typing required.

    o You can view the process of getting a complete operating system - or a runtime system like java - as a bootstrapping operation: Start with something simple and limited, and birng up something complex and powerful.

  • RELEVANCY SCORE 2.74

    DB:2.74:How To Change Bootstrap Theme For Asp.Net Web Form? xs


    Hello,
    I'm currently running visual studio 2013 update 2. I am trying to make a ASP.NET WEB FORMS APPLICATION in Visual C#.

    I wanted to change the current bootstrap theme to a different one (from bootswatch).I have already installed nuget and installed bootstrap.

    I tried these steps below... But it does not work.
    (http://www.asp.net/visual-studio/overview/2013/creating-web-projects-in-visual-studio#bootstrap)

    In your browser, go to bootswatch, choose a theme, and then click Download. (This downloads
    bootstrap.min.css by default; if you want to examine the CSS code, get
    bootstrap.css instead of the minified version.)Copy the contents of the downloaded CSS file.In Visual Studio, create a new Style Sheet file named bootstrap-theme.css in the
    Content folder and paste the downloaded CSS code into it.Open App_Start/Bundle.config and change bootstrap.css to
    bootstrap-theme.css.
    The main problem I'm running into, other than it not changing the theme, is underApp_Start/Bundle.config, there is no bootstrap.css or bootstrap-theme.css.
    Could someone provided very, very detailed instructions on how to change the default theme?

    Thanks!

    DB:2.74:How To Change Bootstrap Theme For Asp.Net Web Form? xs

    Hi bkoo,
    The main problem I'm running into, other than it not changing the theme, is underApp_Start/Bundle.config, there is no bootstrap.css or bootstrap-theme.css.
    I check it in my side, I just could get it in the MVC project. It doesn't have it in the default WebForm project.

    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.

    Click
    HERE to participate the survey.

  • RELEVANCY SCORE 2.71

    DB:2.71:Ios For 3620 And Nm16-Ews kx



    i have 3620 with nm16-ews

    working with ios is-mz-12.3-6a?

    thanks

  • RELEVANCY SCORE 2.66

    DB:2.66:Mod_Cluster-Manager Ui Update 71



    Hello,

    i was looking to modernize a bit UI of mod_cluster-manager, maybe use bootstrap, pull it from official CDN (v3.x+) and not go heavy on JS, in fact for initial release not use JS at all (aka bootstrap js + jquery).

    here is what i have so far, let me know if it is worthy to request a pull (this would be part of [MODCLUSTER-209] mod_cluster_manager need better presentation - JBoss Issue Tracker)

  • RELEVANCY SCORE 2.66

    DB:2.66:Voip Setup Using Cisco 3620 3s



    I am using a 3620 for VoIP debit card platform. I have a few questions:

    1. Can I write my own TCL IVR scripts to run on a Cisco 3620 ?

    2. Does the signature locked scripts that are provided by Cisco identify payphone calls and if yes then what variable name is used to store the information digits ?

    Thanks in advance.

    AJ

    DB:2.66:Voip Setup Using Cisco 3620 3s


    Yes, the best IOS to run is 12.2.11T. This has SRST and IOS Telephony 2.0

    ** www.iptnetworkers.com **

  • RELEVANCY SCORE 2.63

    DB:2.63:3620 Drops Connection 1k



    I have a 3620 acting as my edge router. For reasons unknown it recently has been dropping its connection and not allowing any Internet activity. When this has occured, I tried to console in to it and that was even unavailable. (Just happened while I was typing this) I notice on the front of the unit are two activity lights for slot 0 and 1. During normal operation, only 0 is active. When this issue occurs, 1 is on steady and 0 is off.

    We used to have a frame connecting our sites, but now have a different configuration so the only role this router has is connection to our Internet (DIA).

    Two questions: 1) where can I look (logs)to see if there are any configuration or hardware issues; and 2) if I wish (and I do) to replace the unit, what would an equivilant unit be? Addendum to #2, I am planning on replacing my NS firewall with an ASA-5510.

    Here is my current sh ru:

    Building configuration...

    Current configuration:

    !

    version 11.3

    service timestamps debug uptime

    service timestamps log uptime

    no service password-encryption

    !

    hostname powi

    !

    enable password ******

    !

    ip subnet-zero

    !

    !

    !

    !

    interface Ethernet0/0

    ip address 68.78.90.226 255.255.255.224

    !

    interface Serial0/0

    description Internet T1 via SBC

    ip address 68.23.65.6 255.255.255.252

    encapsulation frame-relay IETF

    frame-relay map ip 68.23.65.5 659 broadcast

    frame-relay lmi-type ansi

    !

    interface Ethernet1/0

    ip address 64.211.222.130 255.255.255.192

    !

    interface Serial1/0

    description Internet T1

    ip address 64.208.169.38 255.255.255.252

    shutdown

    !

    interface Serial1/1

    description Link to Grafton

    ip address 172.20.201.1 255.255.255.0

    encapsulation ppp

    shutdown

    !

    ip classless

    ip route 0.0.0.0 0.0.0.0 68.23.65.5

    ip route 172.16.201.0 255.255.255.0 172.20.201.2

    !

    access-list 1 permit 172.16.0.0 0.0.255.255

    access-list 111 permit ip 172.16.0.0 0.0.255.255 any

    banner motd ^C

    CONSTRUCTION FORMS PORT WASHINGTON ROUTER

    NON-AUTHORIZED PERSONNEL DISCONNECT ^C

    !

    line con 0

    line aux 0

    line vty 0

    password ****

    login

    line vty 1 3

    login

    line vty 4

    password ****

    login

    !

    end

    My show ver:

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-IS-M), Version 11.3(6)T, RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-1998 by cisco Systems, Inc.

    Compiled Wed 07-Oct-98 09:38 by ccai

    Image text-base: 0x600088E0, data-base: 0x60842000

    ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc

    1)

    powi uptime is 9 minutes

    System restarted by power-on

    System image file is "flash:c3620-is-mz_113-6_T.bin", booted via flash

    cisco 3620 (R4700) processor (revision 0x81) with 18432K/6144K bytes of memory.

    Processor board ID 09197395

    R4700 processor, Implementation 33, Revision 1.0

    Bridging software.

    X.25 software, Version 3.0.0.

    2 Ethernet/IEEE 802.3 interface(s)

    3 Serial network interface(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    8192K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    DB:2.63:3620 Drops Connection 1k


    You can look at the logs , with the "show logg" command . You also may be the only person left still running 11.X code , you should really think about upgrading the code within the constraints of the memory installed on the box .

  • RELEVANCY SCORE 2.63

    DB:2.63:Cisco 3620 Router Ios Ccie Lab xa



    Dear Sir,

    I procured one Cisco 3620 Router for CCIE RS Lab.

    Which IOS should I download from www.cisco.com to support 12.2T and IPV6.

    Waiting for reply..

    Thanks/Regards

    Atul

    DB:2.63:Cisco 3620 Router Ios Ccie Lab xa


    Dear Sir,

    Please answer to my some question.

    I am writing my exam on 4 th July mean definately I will not have DLSW/ATM/ISIS/ISDN.

    I have a question about the equipment because on cisco website yet it has not been modified.

    Waiting for your reply...

    Regards

    Atul

  • RELEVANCY SCORE 2.63

    DB:2.63:Viruscan 8.7p4 Client Not Updating 83



    Hello,

    I have 2000 clients with VS8.7Patch 4 manage by an EPO 4.5 server. I have 15 clients that failed to update.

    both Pushing definition frm epo server, or manual update from PC failed.

    Uninstall and reinstall Mcafee agent and virusScan has solved the problem on a few pc, but problem still occurs on others.

    I have this kind of logs :

    McScript_error.log :

    2010-12-28 06:48:10 E #3620 ScrptExe [Executing section GetNewDATs]-2010-12-28 06:48:10 E #3620 ScrptExe [CallIf]-2010-12-28 06:48:10 E #3620 ScrptExe [Executing section DownLoadFullDats]-2010-12-28 06:48:10 E #3620 ScrptExe [Call]-2010-12-28 06:48:10 E #3620 ScrptExe [Executing section VerifyFile]-2010-12-28 06:48:10 E #3620 ScrptExe [GetFiles]-2010-12-28 06:48:10 E #3620 creposi [getFiles,Previous\VSCANDAT1000\DAT\0000,C:\Documents and Settings\All Users\Application Data\McAfee\Common Framework\Previous\VSCANDAT1000\DAT\0000]-2010-12-28 06:48:10 E #3620 creposi [downloadFile,avvdat-6208.zip,C:\Documents and Settings\All Users\Application Data\McAfee\Common Framework\Previous\VSCANDAT1000\DAT\0000]-2010-12-28 06:48:10 E #3620 imsite [downloadFile,avvdat-6208.zip,Previous\VSCANDAT1000\DAT\0000,C:\Documents and Settings\All Users\Application Data\McAfee\Common Framework\Previous\VSCANDAT1000\DAT\0000,1]-2010-12-28 06:48:10 E #3620 imsite The naInet library returned an error. [Parent error: NaInet library returned code == -10]2010-12-28 06:48:10 E #3620 ScrptUtl Error trace:2010-12-28 06:48:10 E #3620 Thread [Main thread]-2010-12-28 06:48:10 E #3620 SessMgr [SessionManager::runScript:C:\Documents and Settings\All Users\Application Data\McAfee\Common Framework\UpdateMain.McS]-2010-12-28 06:48:10 E #3620 ScrptExe [Executing section ScriptMain]-2010-12-28 06:48:10 E #3620 ScrptExe [CallIf]-

    or

    2011-01-06 14:13:59 E #4040 Thread [Main thread]-2011-01-06 14:13:59 E #4040 SessMgr [initializeScript]-2011-01-06 14:13:59 E #4040 creposi [setNextRepositoryToUse]-2011-01-06 14:13:59 E #4040 creposi [Candidate ePOSA_GREWPIMP046: testing]-2011-01-06 14:13:59 E #4040 creposi [downloadFile,SiteStat.xml,C:\WINDOWS\TEMP]-2011-01-06 14:13:59 E #4040 imsite [downloadFile,SiteStat.xml,,C:\WINDOWS\TEMP,1]-2011-01-06 14:13:59 E #4040 imsite NaInet library returned code == -882011-01-06 14:13:59 E #4040 imsite Error trace:2011-01-06 14:13:59 E #4040 Thread [Main thread]-2011-01-06 14:13:59 E #4040 SessMgr [initializeScript]-2011-01-06 14:13:59 E #4040 creposi [setNextRepositoryToUse]-2011-01-06 14:13:59 E #4040 creposi [Candidate ePOSA_GREWPIMP046: testing]-2011-01-06 14:13:59 E #4040 creposi [downloadFile,SiteStat.xml,C:\WINDOWS\TEMP]-2011-01-06 14:13:59 E #4040 imsite [downloadFile,SiteStat.xml,,C:\WINDOWS\TEMP,1]-2011-01-06 14:13:59 E #4040 imsite The naInet library returned an error. [Parent error: NaInet library returned code == -88]2011-01-06 14:14:02 E #4040 ScrptExe Error trace:

    agent_machinename_error.log :

    2010-12-10 12:12:37 E #660 Logging addAgentInfoToLog GUID query error 22010-12-10 12:12:41 E #3912 Logging addAgentInfoToLog GUID query error 22010-12-10 12:47:31 E #3068 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-10 12:47:32 E #3068 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-10 12:47:32 E #3068 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-10 12:47:33 E #3068 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-10 12:47:33 E #3068 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-10 13:12:37 E #2000 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-10 13:12:37 E #2736 Sched --CSchedule::DeleteTask hr=0x8000001b : Task is not found2010-12-10 13:12:37 E #3576 Sched --CSchedule::GetTask hr=0x8000001b : Task is not found2010-12-10 13:12:38 E #3940 Sched --IsSWInstalled hr=-1011(0xfffffc0d)2010-12-10 13:13:10 E #3576 updater Error trace:2010-12-10 13:13:10 E #3576 updater [set updater options,VIRUSCAN8700,0,0,SelectiveUpdateOptions,SelectiveClientUpdateList,VSCAN ENG*;VSCANCEU1000;VSCANDAT*;EXTRADAT1000;BOCVSE__1000;VIRUSCAN8700;]-2010-12-10 13:13:10 E #3576 updater An update session is already running2010-12-10 13:13:27 E #1328 Logging drop 1 [\\.\mailslot\VSECMA-{89F85BC2-D499-4383-8226-D02E7366A95C}] file not found2010-12-10 13:18:30 E #3068 Sched --CSchedule::ModifyTask hr=0x8000001b : Task is not found2010-12-14 17:29:29 E #2044 Logging drop 0 [\\.\mailslot\{76889C92-A0C0-46e3-A4E1-1D6A5439B8DD}00000b30] file not found2010-12-14 17:29:29 E #2040 Logging drop 0 [\\.\mailslot\{76889C92-A0C0-46e3-A4E1-1D6A5439B8DD}00000b30] file not found2010-12-15 17:42:38 E #628 Logging drop 0 [\\.\mailslot\{76889C92-A0C0-46e3-A4E1-1D6A5439B8DD}000009a8] file not found2010-12-16 17:42:58 E #612 Logging drop 0 [\\.\mailslot\{76889C92-A0C0-46e3-A4E1-1D6A5439B8DD}00000de0] file not found2010-12-28 14:50:56 E #3512 ipcchannel Error trace:2010-12-28 14:50:56 E #3512 ipcchannel Data not available for reading in 21600000 milliseconds2010-12-28 14:50:56 E #3512 ipcchannel Error trace:2010-12-28 14:50:56 E #3512 ipcchannel Data receive failed2010-12-28 14:50:56 E #3512 Uec Error trace:2010-12-28 14:50:56 E #3512 Uec Mue ipc client did not terminate gracefully2010-12-30 09:16:24 E #2984 ipcchannel Error trace:2010-12-30 09:16:24 E #2984 ipcchannel Data not available for reading in 21600000 milliseconds2010-12-30 09:16:24 E #2984 ipcchannel Error trace:2010-12-30 09:16:24 E #2984 ipcchannel Data receive failed2010-12-30 09:16:24 E #2984 Uec Error trace:2010-12-30 09:16:24 E #2984 Uec Mue ipc client did not terminate gracefully2010-12-31 12:18:21 E #3744 Sched --CSchedule::DeleteTask hr=0x8000001b : Task is not found2010-12-31 12:23:23 E #3744 Sched --CSchedule::DeleteTask hr=0x8000001b : Task is not found2011-01-04 15:17:00 E #2896 ipcchannel Error trace:2011-01-04 15:17:00 E #2896 ipcchannel Data not available for reading in 21600000 milliseconds2011-01-04 15:17:00 E #2896 ipcchannel Error trace:2011-01-04 15:17:00 E #2896 ipcchannel Data receive failed

    If anyone hs a clue...don't know if the problem comes from VS or EPO (Agent GUID problem or what else ? )

    Thanks,

    Frederic.

    DB:2.63:Viruscan 8.7p4 Client Not Updating 83


    Did you get any resolution to this? I am seeing the same type of errors in some logs. Similar issue but on a larger scale.

  • RELEVANCY SCORE 2.63

    DB:2.63:Call Manager Express On 3620 sk



    Could a Cisco 3620 router with the necessary amount of memory be used for the Cisco Call Manager Xpress?

    Thanks for any help.

    Jeff

  • RELEVANCY SCORE 2.63

    DB:2.63:Win7 Printer Driver Without Win Update z3



    I am trying to install a printer driver for my HP Deskjet 3620.

    Windows update has been turned off on my laptop but I can install drivers and such locally.

    When I try to install the printer it obviously fails because it can not connect to thru Windows Update to get a driver.

    Is there a way to install the driver locally without Windows Update? I can not find anywhere on HP site to download a driver for Windows 7 for my printer that I can install locally.

    DB:2.63:Win7 Printer Driver Without Win Update z3


    Hi RickVR,

    The driver for this printer is only available through Windows Update when using Windows 7 (32/64bit). There is not a downloadable driver available for this printer through HP unfortunately.

  • RELEVANCY SCORE 2.63

    DB:2.63:Crash Durring Flash Erase p8



    My 3620 crashed durring the erase of the old image.

    It now hangs in a loop trying to load the bootstrap.

    I can't interrupt it with 'break'.

    any ideas?

    many thanks,

    Karl

    DB:2.63:Crash Durring Flash Erase p8


    Ok,

    if your bootstrap IOS image can able to do TFTP communication, just load with new image into flash and remember that before that one "squeeze" the flash file system.

    Ashok.

  • RELEVANCY SCORE 2.63

    DB:2.63:Apache Wont Start After Bootstrap Repair - Urgent mx





    So after a failer update to 12 I ran bootstrap repair.

    But Apache wont start. - I get errors like -

    Code:

    DB:2.63:Apache Wont Start After Bootstrap Repair - Urgent mx




    I decided to move to cPanel,
    I got sick of struggling my way through.

    The KB article helped list the problems but I had no clue how to fix them.

    The cPanel crew will do a full migration for me.

    Thanks anyway!

    Regards
    Dave

  • RELEVANCY SCORE 2.62

    DB:2.62:Vonage Not Working Behind Cisco 3620 Router fz



    Trying to configure vonage behind Cisco 3620 router. It worked fine behind a D-Link home router but not behind the Cisco 3620. Any ideas?

    DB:2.62:Vonage Not Working Behind Cisco 3620 Router fz


    If you can't remember how you set up your ATA, then it may just be best to reset it and let it grab a proper DHCP address for its subnet in case you put in a static IP that isn't correct for the subnet it is on now.

    And you don't have to specify your WAN IP with Vonage. . .all that should be automatically gotten. And the MAC address is so that the ATA device can be registered on Vonage's network.

  • RELEVANCY SCORE 2.61

    DB:2.61:3620 Modules zj



    Can I install an NM-4B-S/T an NM-8AM and a WIC-2T together in a 3620 router?

    Where can I review diferents configurations like that?

    Somebody help.

    Thanks in advanced.

    mc

    DB:2.61:3620 Modules zj


    Just to add, the problem will be with WIC-2T. Following url indicates what NM modules you need to install WICs. So in you have NM-4B-S/T and NM-8AM, will occupy 2 NM slots already.

    http://www.cisco.com/warp/public/107/wic-2t.shtml

  • RELEVANCY SCORE 2.58

    DB:2.58:How To Insert 10x15 Papers In 3620? m7



    How do I load 10x15 paper in 3520?

    DB:2.58:How To Insert 10x15 Papers In 3620? m7


    Hi,

    Hope the following instructions help:

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?lang=encc=ustaskId=120prodSeriesId=​...

    Regards.

  • RELEVANCY SCORE 2.58

    DB:2.58:Upgrade 3620 Router With 2811 Router ca



    I currently have in place a cisco 3620 Router with 4 t1 wic cards and 2 Fastethernet ports. We want to replace with somthing compareable. Can I use the wic cards from the 3620? If not What all do I need to have the same configuration

    DB:2.58:Upgrade 3620 Router With 2811 Router ca


    Edison, I know that the ISR supports WIC-1DSU-T1-V2 cards but not sure whether they support

    the version1 WIC-1DSU-T1 module.

    It does not. Only v2 is supported. Good point.

    __

    Edison.

  • RELEVANCY SCORE 2.58

    DB:2.58:Interconnecting 2811 And 3620 mm



    I have 2811 ruter installed with FXS card. I have a FXO card but since its not supported on 2811, i therefore installed it in 3620. How will i interconnect these routers having FXS card on one router and FXO card on the other??

    DB:2.58:Interconnecting 2811 And 3620 mm


    Connect them with ethernet and confgure the appropriate dial-peers. Generally speaking, for a given destination-pattern, the dial-peer will of pots type on one router, and voip on the other.

    You can use either H.323 or SIP for this.

  • RELEVANCY SCORE 2.58

    DB:2.58:I Cant Acsess Windows Update. 9k


    I have service packs 23,are there no up dates for service pack 3?

  • RELEVANCY SCORE 2.58

    DB:2.58:Nat And Dhcp On A 3620 d3



    I just connected a 3620 running 122-15 T12 to my cablevision modem to use instead of Netgear routers. How can I see how much memory is being consumed by Nat translations? How can I see what leases have been given out to the clients?

    Thanks

    DB:2.58:Nat And Dhcp On A 3620 d3


    I found the command to check these items. Thanks anyway.

    I read that there may be problems with the rebinding of the interface connected to the cable modem, and it not being able to bind again (get the dhcp address). Is this the case?

  • RELEVANCY SCORE 2.57

    DB:2.57:Trying To Configure A 3620 Mgcp Gateway s9



    Getting this error please change your VIC selection

    DB:2.57:Trying To Configure A 3620 Mgcp Gateway s9


    Post that error message as you try to configure it with

    sh run, sh ver, sh diag

    from 3620.

  • RELEVANCY SCORE 2.57

    DB:2.57:Cisco 3620 Router Ios Ccie Lab 9j



    Dear Sir,

    I procured one Cisco 3620 Router for CCIE RS Lab.

    Which IOS should I download from www.cisco.com to support 12.2T and IPV6.

    Waiting for reply..

    Thanks/Regards

    Atul

    DB:2.57:Cisco 3620 Router Ios Ccie Lab 9j


    Hi Atul,

    This link may help you with the same

    http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

    Regards,

    Ankur

  • RELEVANCY SCORE 2.57

    DB:2.57:[Svn:Osmf:] 15775: Change Bootstrap Update Criteria. mz


    Revision: 15775Revision: 15775Author: weizhang@adobe.comDate: 2010-04-27 15:32:23 -0700 (Tue, 27 Apr 2010)Log Message:***********Change bootstrap update criteria. A bootstrap update will take place if either the newer bootstrap has a larger version number or the newer bootstrap has the same version number but a newer current media time.Modified Paths:************** osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as

    DB:2.57:[Svn:Osmf:] 15775: Change Bootstrap Update Criteria. mz

    Revision: 15775Revision: 15775Author: weizhang@adobe.comDate: 2010-04-27 15:32:23 -0700 (Tue, 27 Apr 2010)Log Message:***********Change bootstrap update criteria. A bootstrap update will take place if either the newer bootstrap has a larger version number or the newer bootstrap has the same version number but a newer current media time.Modified Paths:************** osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as

  • RELEVANCY SCORE 2.57

    DB:2.57:1638p Firmware Error 8a



    After firmware update of our NV 1638P on last version NV1638A-18-02-05-00, the switch has been reboted and started in bootstrap mode, I have just tried to upload from tftp server and xmodem all firmware version downloaded from "https://www.adtran.com/web/appmanager/portal/Adtran?_nfpb=true_pageLabel=waverunner_page_support_softwaredownloads_hiddensoftwareFamilyId=1811", but all time when the switch boot sand this message:

    Executing bootstrap...

    ram: 268435456 bytes of RAM detected.

    Serial Number: LBADTN1124AX266

    Bootstrap

    Version: 18.01.01.00

    Checksum: cffe6c1d3684d97af466c3942cafdd43

    Build Date: Tue Mar 8 16:04:55 CST 2011

    vfs: NONVOL: 134217728 total, 54777856 used.

    bootstrap: Checking boot configuration...

    bootstrap: Primary image is 'NONVOL:/NV1638A-18-02-01-00.biz'.

    bootstrap: Booting 'NONVOL:/NV1638A-18-02-01-00.biz'

    bootstrap: Verifying file integrity, stand by...

    bootstrap: Image checksum failed.

    bootstrap: Primary image boot failed.

    bootstrap: Could not boot primary image.

    bootstrap: Could not boot image, entering bootstrap mode...

    cli: starting command line interface...

    cli: starting user interface

    Press '?' for help.

    eth0/1: initializing...

    eth0/1: MAC address is 00:A0:C8:7B:FA:E6

    bootstrap#

    What can I do?

    Thank a lot

    DB:2.57:1638p Firmware Error 8a


    mrglace:

    I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

    Thanks,

    Levi

  • RELEVANCY SCORE 2.56

    DB:2.56:Ipv6 On Cisco 3620 Router 13



    Dear Sir,

    I have a Cisco 3620 Router with 32 mb Dram and 16 MB flash.

    Which IOS will support IPV6 addressing on this Router.

    Thanks/Regard

    Atul

    DB:2.56:Ipv6 On Cisco 3620 Router 13


    The IOS image will depend on the features that you want, for example, to get the full features of IPv6 routing protocols like OSPFv3, ISISv3, RIPng, BGP-4+.

    12.3(6a)

    12.2(15)T9

    Ranging from features sets depending on what version you want to run

    ENTERPRISE BASIC

    IP PLUS

    IP/FW/IDS PLUS IPSEC 3DES BASIC NO VOICE

    IP/FW/IDS PLUS IPSEC 3DES BASIC NO ATM

    IP/H323 PLUS BASIC

    IP/IPX/FW/IDS PLUS BASIC

    Please go to http://tools.cisco.com/Support/Fusion/FusionHome.do use “Find software with the features I need”

    On a 12.3.6a images require 96 Mb ram and 32 Mb flash for most of the images mentioned below.

    ENTERPRISE PLUS c3640-js-mz.12.3-6a

    ENTERPRISE PLUS IPSEC 3DES c3640-jk9s-mz.12.3-6a

    ENTERPRISE PLUS/H323 MCM c3640-jsx-mz.12.3-6a

    ENTERPRISE/FW/IDS PLUS IPSEC 3DES c3640-jk9o3s-mz.12.3-6a

    ENTERPRISE/SNASW PLUS c3640-a3js-mz.12.3-6a

    ENTERPRISE/SNASW PLUS IPSEC 3DES c3640-a3jk9s-mz.12.3-6a

    IP PLUS c3640-is-mz.12.3-6a

    IP PLUS IPSEC 3DES c3640-ik9s-mz.12.3-6a

    IP/FW/IDS PLUS IPSEC 3DES c3640-ik9o3s-mz.12.3-6a

    IP/IPX/APPLETALK PLUS c3640-bins-mz.12.3-6a

    IP/IPX/APPLETALK PLUS FW/IDS c3640-bino3s-mz.12.3-6a

    Thanks, Mak

  • RELEVANCY SCORE 2.56

    DB:2.56:Hp Pavilion 3620, 8a



    , i need driver for windows xp, at least for the wireless plug or ethernet one plz

    DB:2.56:Hp Pavilion 3620, 8a


    Hi:

    I think I know what wireless driver you need. I searched and found someone said that wireless adapter using the Ralink chip.

    The problem is: I don't know what Ralink chip you have so just trythe 3 USB driver links until you get the right one. One of them has to work. Hopefully it will be the first one.

    http://www.ralinktech.com/en/04_support/support.ph​p?sn=500

    Paul

  • RELEVANCY SCORE 2.53

    DB:2.53:3620 Router md



    will a 3620 router with a second ethernet module be able to route ethernet connections from cable modems.

    DB:2.53:3620 Router md


    I am assuming that the cable modem is in bridging mode, this should help

    http://www.cisco.com/warp/public/109/router_behind_cm_19268.shtml

    Thanks, Mak

  • RELEVANCY SCORE 2.53

    DB:2.53:3620 Router With Buffer Failures zd



    We have just replaced a 1600 router with a 3620 and we are seeing a lot of small buffers failures (show buffers) I can't see what is causing this or how to solve it. Any ideas?

    Duncan

    DB:2.53:3620 Router With Buffer Failures zd


    It seams to have calmed down, now the errors are less 0.01%. I will have to keep an eye out, thanks for the links.

  • RELEVANCY SCORE 2.52

    DB:2.52:Problem Policy Routing 3620 Ios 12.2.12 d7



    Hi,

    I can not turn on policy routing on frame-relay subinterfaces. I have router 3620 and IOS 12.2.12.

    Do you know if the problem is IOS or another?

    Thank you

    David

    DB:2.52:Problem Policy Routing 3620 Ios 12.2.12 d7


    I am not aware of any bugs in 12.2 code for PBR. If you are still having problems with configuring policy routing on subinterfaces, you might want to re-post to this forum with a screen capture of what you are configuring and a more detailed description of what is not working.

  • RELEVANCY SCORE 2.52

    DB:2.52:Ipv6 On 12.3(5a) On Cisco 3620 Router pc



    I am procuring a Cisco 3620

    Router . I just want to confirm whether 12.3(5a) IOS on Cisco 3620 Router will support IPV6 OR NOT..

    Cisco 3620 Router is having following config.

    Memory

    64 MB Dram – 8MB Flash

    Thanks/Regards

    Atul

    DB:2.52:Ipv6 On 12.3(5a) On Cisco 3620 Router pc


    The IOS image will depend on the features that you want, for example, to get the full features of IPv6 routing protocols like OSPFv3, ISISv3, RIPng, BGP-4+.

    12.3(6a)

    12.2(15)T9

    Ranging from features sets depending on what version you want to run

    ENTERPRISE BASIC

    IP PLUS

    IP/FW/IDS PLUS IPSEC 3DES BASIC NO VOICE

    IP/FW/IDS PLUS IPSEC 3DES BASIC NO ATM

    IP/H323 PLUS BASIC

    IP/IPX/FW/IDS PLUS BASIC

    Please go to http://tools.cisco.com/Support/Fusion/FusionHome.do use “Find software with the features I need”

    On a 12.3.6a images require 96 Mb ram and 32 Mb flash for most of the images mentioned below.

    ENTERPRISE PLUS c3640-js-mz.12.3-6a

    ENTERPRISE PLUS IPSEC 3DES c3640-jk9s-mz.12.3-6a

    ENTERPRISE PLUS/H323 MCM c3640-jsx-mz.12.3-6a

    ENTERPRISE/FW/IDS PLUS IPSEC 3DES c3640-jk9o3s-mz.12.3-6a

    ENTERPRISE/SNASW PLUS c3640-a3js-mz.12.3-6a

    ENTERPRISE/SNASW PLUS IPSEC 3DES c3640-a3jk9s-mz.12.3-6a

    IP PLUS c3640-is-mz.12.3-6a

    IP PLUS IPSEC 3DES c3640-ik9s-mz.12.3-6a

    IP/FW/IDS PLUS IPSEC 3DES c3640-ik9o3s-mz.12.3-6a

    IP/IPX/APPLETALK PLUS c3640-bins-mz.12.3-6a

    IP/IPX/APPLETALK PLUS FW/IDS c3640-bino3s-mz.12.3-6a

    Thanks, Mak

  • RELEVANCY SCORE 2.51

    DB:2.51:3620 Router And Wic-1dsu-T1-V2 T1 Card Support. dm



    Hello All. Anyone know if the 3620 router supports the WIC-1DSU-T1-V2 T1 WIC?

    I insert the card into the NM-1FE2W Port adapter but the card is not being recognized. I get: " WIC Slot 1: Unknown WAN daughter card"

    The router is running IOS version 12.2(5d) and I know that the IOS must be 12.2.17 for the card to be supported.

    Do I need to just update the IOS to a newer version?

    This is the output of the "show diag" on the router :

    Slot 1:

    NM-1FE2W Port adapter, 2 ports

    Port adapter is analyzed

    Port adapter insertion time unknown

    EEPROM contents at hardware discovery:

    Hardware Revision : 1.0

    Top Assy. Part Number : 800-04796-01

    Board Revision : G0

    Deviation Number : 0-0

    Fab Version : 05

    PCB Serial Number : JAD061105M9

    RMA Test History : 00

    RMA Number : 0-0-0-0

    RMA History : 00

    EEPROM format version 4

    EEPROM contents (hex):

    0x00: 04 FF 40 00 D7 41 01 00 C0 46 03 20 00 12 BC 01

    0x10: 42 47 30 80 00 00 00 00 02 05 C1 8B 4A 41 44 30

    0x20: 36 31 31 30 35 4D 39 03 00 81 00 00 00 00 04 00

    0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

    WIC Slot 0:

    FT1

    Hardware revision 1.4 Board revision F1

    Serial number 17175863 Part number 800-03279-04

    Test history 0x0 RMA number 00-00-00

    Connector type Wan Module

    EEPROM format version 2

    EEPROM contents (hex):

    0x20: 02 11 01 04 01 06 15 37 50 0C CF 04 00 00 00 00

    0x30: 79 00 00 00 99 11 24 01 FF FF FF FF FF FF FF FF

    WIC Slot 1:

    Unknown WAN daughter card

    Hardware revision 64.0 Board revision 5

    Serial number 1379991810 Part number 800-7441222-79

    Test history 0x43 RMA number 49-49-52

    Connector type PCI

    EEPROM format version 4

    EEPROM contents (hex):

    0x20: 04 FF 40 00 52 41 01 02 C1 8B 46 4F 43 31 31 34

    0x30: 35 32 52 55 51 82 49 20 9A 05 42 41 30 03 00 81

    This is the "show ver" output:

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-I-M), Version 12.2(5d), RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-2002 by cisco Systems, Inc.

    Compiled Sat 02-Feb-02 01:51 by kellythw

    Image text-base: 0x600089A8, data-base: 0x60A54000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    MAN-RTR-3620 uptime is 6 days, 18 hours, 59 minutes

    System returned to ROM by power-on

    System image file is "flash:c3620-i-mz.122-5d.bin"

    cisco 3620 (R4700) processor (revision 0x81) with 49152K/16384K bytes of memory.

    Processor board ID 30404845

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    Bridging software.

    X.25 software, Version 3.0.0.

    2 FastEthernet/IEEE 802.3 interface(s)

    3 Serial network interface(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    32768K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    Any help would be appreciated.

    Thank you.

    Dmitry.

  • RELEVANCY SCORE 2.51

    DB:2.51:3620 Boot Msg Password Functionality Disabled p8



    I am trying to clear the password on a 3620 and I get the above message right after the Bootrom counts the memory. I cant break into the ROMMON either. Any help would be appreciated.

    Thanks,

    Jeff Sanborn

    DB:2.51:3620 Boot Msg Password Functionality Disabled p8


    Hmmm...I know that on some routers NVRAM is stored on the flash stick and other times it is stored on an EEPROM. If you replaced the FLASH, it looks like a 3620 probably has an EEPROM NVRAM (I can't verify this for sure, but just a guess).

    The only I can think of to try is to use the XMODEM procedure from rommon mode and downgrade the IOS on the router to a version that doesn't understand the no service password-recovery command. I think this command was introduced in IOS version 12.x so maybe try downgrading to an 11.2 version of IOS. As I said I'm just throwing an idea out there.

    http://www.cisco.com/warp/public/130/xmodem_generic.html

  • RELEVANCY SCORE 2.51

    DB:2.51:Cisco 3620 Router Ios Ccie Lab 7a



    Dear Sir,

    I procured one Cisco 3620 Router for CCIE RS Lab.

    Which IOS should I download from www.cisco.com .

    Waiting for reply..

    Thanks/Regards

    Atul

    DB:2.51:Cisco 3620 Router Ios Ccie Lab 7a


    Atul,

    The current IOS version for CCIE Lab exam routers is 12.2T, including IPv6 features. See http://www.cisco.com/en/US/learning/le3/ccie/rs/lab_equipment.html.

    Cheers,

    Josef.

  • RELEVANCY SCORE 2.51

    DB:2.51:Is It Safe To Delete The Update Cache Folder? fc


    InC:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Update Cache, I've got a copy of (what looks like) SQL Server 2008 SP1, occupying about 340MB of disk space.
    Is it safe to delete this folder? Will deleting it impact upgrade or repair scenarios?

    DB:2.51:Is It Safe To Delete The Update Cache Folder? fc

    I had the same problem for 2012 - it was occuping about 2 GB on my SSD drive. I moved it to a different disk and used Junction to create a link back to the original location.

  • RELEVANCY SCORE 2.51

    DB:2.51:Ios Update For 3620 Router 1x



    Hi,

    I have a 3620 router and I am currently on 11.3 IOS. Can I go directly to the latest verison (12.4 I think) or does it need to be done incrementaly? Also, the last time I did this I used TFTP...is that the best way to update?

    Thanks!

    DB:2.51:Ios Update For 3620 Router 1x


    You can upgrade to 12.4 directly. There's no need to do it incrementally as is the case with PIX.

    TFTP should work fine. However, there might be some problems with the TFTP application if the file size is more than 20mb or so.

    Someone posted in Netpro a few days ago that the 3com TFTP application handles files bigger than 20mb with no issues. I had bookmarked the web link back then and here it is for your use.

    http://support.3com.com/software/utilities_for_windows_32_bit.htm

    File name: 3cdv2r10.zip

    HTH

    Sundar

  • RELEVANCY SCORE 2.51

    DB:2.51:Cisco 3620 With Firewall Software Pix 8x



    I am looking to redesign the way the routers work on my network. My plan is to have a Pix that will police the network internally and will forward any outbound traffic to a cisco 3620 with firewall and VPN which users will use to access the internet

    The Cisco 3620 will sit at the boundary of the network with firewalling configured

    The PIX will sit behind the Cisco 3620 as a second layer of security

    My questions are:

    Is my proposed design feasible with the equipment and is it a good idea to have a PIX behind a 3620 both acting as firewalls?

    Secondly would I configure the PIX or the 3620 to do the VPN connections?

    As you can imagine from my questions I'm pretty new to this all and would appreciate some help/guidance.

    DB:2.51:Cisco 3620 With Firewall Software Pix 8x


    Yes, the 3620 will be terminating our 2mb leased line connection to our ISP with the PIX sitting behind the 3620.

  • RELEVANCY SCORE 2.51

    DB:2.51:No Ipv6 Ospf Routing Feature Set Available For 3620? c9



    I was hoping up upgrade the RAM FLASH in my 3620 to support IPv6, as well as OSPFv3 that supports IPv6, but it pulls up as being available for say the 2621 as "IPv6 Routing: OSPF for IPv6 (OSPFv3)", but not available in any way for the 3620.

    Am I reading this wrong, or is OSPFv3 (that supports IPv6) just not available at all for the 3620?

    DB:2.51:No Ipv6 Ospf Routing Feature Set Available For 3620? c9


    Skip,

    OSPFv3 is indeed not available on the 3620. For more information, please refer to the following product bulletin:

    http://www/en/US/products/hw/routers/ps259/prod_bulletin09186a008012639b.html

    Hope this helps,

  • RELEVANCY SCORE 2.50

    DB:2.50:Aaa Preauth On Cisco 3620 9x



    Hi,

    it is possible config AAA preauth by CLID on Cisco 3620??. If yes, what is the IOS needed??. I can´t make it with IOS 12.2(4)T or 12.2(4)T. Thanks in advance.

    DB:2.50:Aaa Preauth On Cisco 3620 9x


    Here is the url which disuss step by step process "how to set up the Preauth based on DNIS"

    http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fsecur_c/fsecsp/scfrad.htm#xtocid14

    Make sure the aaa is setup right. If it still dosen't work, pl turn on following debug

    debug isdn q931

    debug aaa authentication

    debug aaa per-user

    debug aaa authorization

    debug radius

    debug ppp authentication

    debug ppp negotiation

    And present it to a cisco's TAC engineer by opening a case at http://www.cisco.com/tac

  • RELEVANCY SCORE 2.50

    DB:2.50:Cisco Router 3620 Boot Issues kp



    I received cisco router 3620 from a friend. I booted and got to the # sign mode. After a few minutes while checking the config. file, I noticed a sudden change on the console screen

    "System Bootstrap, version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)" and when press enter it just keeps coming so all I have on the console is now series of the above message over and over. Can someone help me ? Anyone out there who has experienced this before ? Thanks so much for your help.

    DB:2.50:Cisco Router 3620 Boot Issues kp


    Reza,

    I tried many times pressing the "pause" and nothing, can't get into rommon mode. What this could be ? The funny thing it was working at the # mode and then suddenly the bootstrap message keeps appearing. Any help to recover will be appreciated. Thanks.

  • RELEVANCY SCORE 2.50

    DB:2.50:2611, 3620 Routing Problem f1



    I have a 3620 directly connected to a 2611, all connections are up and running correctly and each router can ping the directly connected interface of its neighbour. The problem I have is that I cannot ping from a client on the LAN side of the 2611 to the 3620. RIP is set up, though the 3620 uses RIP V2. Default routing is also set up on each router to allow access to the internet.

    I can ping from a client node of 192.168.0.101 to e0/1 192.168.0.100 and also ping to e0/0 195.195.15.2 but thats it! I cannot ping on to the next hop of 3620 e1/3 192.168.100 even though if I ping from the 2611 router CLI I can ping the 3620 e1/3 192.168.100. What gives?

    DB:2.50:2611, 3620 Routing Problem f1


    yes you can specify under the interface what kind of Rip updates you want to send an/or receive

    I beleive the commands are

    send rip v1

    send rip v2

    receive rip 1

    receive rip v2

  • RELEVANCY SCORE 2.50

    DB:2.50:Implemnting Voip With Call Manager And Router 3620 71



    I have a problem with the command for the 3620.

    Help me, please, if anyone have the configuration exemple.

    Thank you

    DB:2.50:Implemnting Voip With Call Manager And Router 3620 71


    What are you trying to do? Pass VoIP traffic over a WAN link? What's the type and speed of the WAN link? Or are you trying to config some other feature? More detail please.

  • RELEVANCY SCORE 2.50

    DB:2.50:Cisco 3620 Router Configuration Guides 7z



    I have two sites connected by a dedicated 128K leased line with a 128K ISDN line as a backup link to the leased line.

    Both sites are using the Cisco 3620 router. Anyone know is there any router configuration guides and sample for the above scenerio ?

    Please help out.

  • RELEVANCY SCORE 2.49

    DB:2.49:Configure Atm/Ima Modules On 3620 jz



    Has anyone ever configured an IMA card and configured it on a 3620?

    DB:2.49:Configure Atm/Ima Modules On 3620 jz

    Once. I used this article:

    http://www.cisco.com/en/US/tech/tk39/tk356/technologies_configuration_example09186a0080174992.shtml

    Pay special attention to the minimum IOS requirements. If you need more than that, I am guessing you will need to open a call.

    Luck.

    Gary Jackson

  • RELEVANCY SCORE 2.49

    DB:2.49:Mpls Support For 3620 Router zp



    Hi,

    is there any IOS version available, which supports MPLS. This is only required in a lab for CCIP preparation.

    Frank

    DB:2.49:Mpls Support For 3620 Router zp


    Hi,

    I realise this thread is very old, and the 3620 even older and unsupported now, but ive got a bunch of them lying around and was trying to do an MPLS lab with them.

    Looks like "c3620-j1s3-mz.122-13.T16.bin" is not available on CCO for download any more, and "c3620-j1s3-mz.123-26.bin" which is on my box does not support MPLS (would have thought it carried features from 12.2T but apparently not for MPLS for this image).

    any way i can get hold of an MPLS image for lab purposes only ?

    thanks

    Mark

  • RELEVANCY SCORE 2.49

    DB:2.49:Pppoe And 3620 kz



    Hi,

    Anyone know how many broadband subscriber sessions (PPPoE) does support with the 3620? also 26xx

    i couldn't find any information about this issue for these series same as 7200.

    Regards,

    M.Arshad rad

    www.ippacket.org

    DB:2.49:Pppoe And 3620 kz


    Check the below link for PPPOE

    http://www.cisco.com/pcgi-bin/Support/browse/psp_view.pl?p=Technologies:PPPoE__PPPoA__PPP_over_Ethernet__PPP_over_ATMviewall=true

  • RELEVANCY SCORE 2.49

    DB:2.49:My Acer Aspire 3620 Does Not Shut Down k1


    Everytime I try to shut the system down it appears the message "Windows is shutting down" but the power never go off. The screen just keeps on that. I have to turn it off by pressing for a few seconds the power button or directly unplugging the laptop from
    the energy. I read it could be a problem with an update file, but honestly I don't know what to do. I don't want to format again the PC, please... what can I do? Thanks a lot!

    DB:2.49:My Acer Aspire 3620 Does Not Shut Down k1

    It's been over a month since I'm having this trouble. The only thing I, probably, did was to update the system. Maybe whiledoingthis it didn't go right and a file is causing this matter.After that I haven't done any changes more than getupdated the Avast
    and Antimalwarebytes.
    I found that an option to this is to put the Laptop into 'Hybernate' mode, is this really helpful?

    I'm cheking this link you shared. Thanks a lot for your answer!

  • RELEVANCY SCORE 2.49

    DB:2.49:Hardware Upgrade From 3620 Router !!! mf



    Hi netpros,

    I need to upgrade a Cisco 3620 to a supported Cisco equivalent device. The customer uses this device for dedicated dial up remote access solution (ONRAMP10). Appart from access server, this device does nothing else. I am thinking a Cisco 2800 series or even a 1800 series ( I am not sure about this one). Your expert advice is much appreciated. Please see the relevant shows of the current device.

    SydRas#sh ver

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-I-M), Version 12.1(5)T5, RELEASE SOFTWARE (fc1)

    TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support

    Copyright (c) 1986-2001 by cisco Systems, Inc.

    Compiled Mon 26-Feb-01 21:15 by ccai

    Image text-base: 0x60008950, data-base: 0x60A26000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    ROM: 3600 Software (C3620-I-M), Version 12.1(5)T5, RELEASE SOFTWARE (fc1)

    SydRas uptime is 1 day, 1 hour, 6 minutes

    System returned to ROM by reload at 12:34:24 Sydney Mon Feb 11 2008

    System restarted at 12:35:09 Sydney Mon Feb 11 2008

    System image file is "flash:c3620-i-mz.121-5.T5"

    cisco 3620 (R4700) processor (revision 0x81) with 26624K/6144K bytes of memory.

    Processor board ID 25121822

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    MICA-6DM Firmware: CP ver 2720 - 5/30/2000, SP ver 2720 - 5/30/2000.

    Channelized E1, Version 1.0.

    Bridging software.

    X.25 software, Version 3.0.0.

    Primary Rate ISDN software, Version 1.1.

    1 FastEthernet/IEEE 802.3 interface(s)

    11 Serial network interface(s)

    30 terminal line(s)

    2 Channelized E1/PRI port(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    8192K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    SydRas#sh controllers e1

    E1 1/0 is up.

    Applique type is Channelized E1 - balanced

    No alarms detected.

    alarm-trigger is not set

    Framing is CRC4, Line Code is HDB3, Clock Source is Line.

    Data in current interval (414 seconds elapsed):

    0 Line Code Violations, 0 Path Code Violations

    0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

    Total Data (last 24 hours)

    0 Line Code Violations, 0 Path Code Violations,

    0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs

    E1 1/1 is down.

    Applique type is Channelized E1 - balanced

    Transmitter is sending remote alarm.

    Receiver has loss of signal.

    alarm-trigger is not set

    Framing is CRC4, Line Code is HDB3, Clock Source is Line.

    Data in current interval (416 seconds elapsed):

    0 Line Code Violations, 0 Path Code Violations

    0 Slip Secs, 416 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins

    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 416 Unavail Secs

    Total Data (last 24 hours)

    0 Line Code Violations, 0 Path Code Violations,

    0 Slip Secs, 86400 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,

    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 86400 Unavail Secs

    controller E1 1/0

    pri-group timeslots 1-10,16

    interface Serial1/0:15

    no ip address

    encapsulation ppp

    isdn switch-type primary-net5

    isdn incoming-voice voice

    !

    interface Group-Async0

    ip unnumbered Loopback1

    encapsulation ppp

    async mode dedicated

    peer default ip address pool dialin_pool

    ppp authentication ms-chap

    group-range 1 30

    DB:2.49:Hardware Upgrade From 3620 Router !!! mf


    Thanks Paolo,

    that was very helpful .. so would you agree that I should be OK with a 2811 plus a Channelized T1/E1 and ISDN PRI Module and a 12 ports integrated digital modem.

    your response is much appreciated !!!

  • RELEVANCY SCORE 2.49

    DB:2.49:Ssh To 3620 With 12.2(1b) Ip+ 3x



    Does anyone know if I can use regular SSH instead of telnet for remote connections to my 3600?

    Thanks,

    Josh

    DB:2.49:Ssh To 3620 With 12.2(1b) Ip+ 3x


    Thanks, I see that I need the IPSec version of the IP PLUS IOS. Also, thanks for the link...

    Josh.

  • RELEVANCY SCORE 2.49

    DB:2.49:Cisco Ios 3p



    where can I get Cisco IOS for 3620 router

    DB:2.49:Cisco Ios 3p


    Hi Revil,

    you need to have a valid CCO login to download the IOS from the Cisco Site.

    if you have CCO login then you can download the IOS for Cisco 3620 from

    http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?get_crypto=data_from=hardware_name=3620software_name=release_name=majorRel=state=:HWtype=

    for all Cisco IOS

    http://www.cisco.com/cgi-bin/Software/Iosplanner/Planner-tool/iosplanner.cgi?majorRel=

    hope this helps.

    rate this post if satisfied.

  • RELEVANCY SCORE 2.49

    DB:2.49:Deskjet 3620 Says Door Open 1d



    I am trying to print on deskjet 3620 and note keeps saying door open....help

    DB:2.49:Deskjet 3620 Says Door Open 1d


    I tried and retried everything....ended up buying a new printer...Thanks for your help.

  • RELEVANCY SCORE 2.49

    DB:2.49:Third Failed Feb Ctp Install, What Do I Do? fd


    Below is the summary log. I am speaking of three separate installs that failed, I only care about one right now:1. First Machine: Failed Upgrade of SQL 2005, I gave up, will eventually wipe disk. Won't uninstall 2008 bits now. Hopeless.2. Second Machine: Failed Removal of Nov CTP, which made install of Feb CTP impossible, and led to #3 below.3. Wiped Disk,XP Pro SP3, updated everything on Windows update, have .Net Framework 1, 2 3. Passed all SystemConfigurationCheck requirements. Tried Install, DB and SSRS failed. I am sad. I scoured registries and did everything with previous failed installs. This will be my third day wasted, same experience last Nov. Perhaps I should stick to release software. Can I fix this install? Previous uninstall attempts failed, despite every AWAL trick I could find on the Web (orphan reg key, setup100.exe w/ various switches etc).I have to upgrade the deployed server next week due to 180 timeout. 700 miles in car. Don;'t trust remote upgrade, likely will need to wipe disks. Very sad.Package results:  Failed: see details belowExecution statistics:  Exit code:                     0x84B30001   Exit facility code:            0x4B3   Exit error code:               0x0001   Exit message:                  Failed: see details below  Package start time:            05/16/2008 15:21:08  Package end time:              05/16/2008 15:54:27  Package install location:      C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap  Package initial action:        Install  Media source location:         Install  Media version:                 10.0.1300.13Machine properties:  Machine name:                  PICCOLA  Machine processor count:       1  OS version:                    Windows XP  OS service pack:               Service Pack 3  OS language:                   English (United States)  OS architecture:               x86  Process architecture:          32 BitProperties provided in package.xml file:  LegalProductName:              SQL Server Database Services 2008  Description:                   SQL Server Database Services 2008  Details:                       Install for SQL Server Database Services 2008  ProductName:                   SQL2008  Version:                       10  SPLevel:                       0  KBArticle:                     KB876234  KBArticleHyperlink:            http://support.microsoft.com/?kbid=876234Command line arguments provided:  ACTION:                        Install  INSTANCEIDSUFFIX:              Product features discovered:  Product:                       SQL2005  Product:                       SQL2008Feature status after execution:  Database Engine Services: Failed: see logs for details  FullText: Passed  Replication: Failed: see logs for details  Analysis Services: Passed  Reporting Services: Failed: see logs for details  Integration Services: Failed: see logs for details  Client Tools: Passed  Business Intelligence Development Studio: Passed  Microsoft Sync Framework: PassedWindows Installer logs generated during execution:  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_Snac_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_Msxml6_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_SSCKatmaiTools_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_Sqlxml4_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_SqlWriter_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_Harmonica_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_OCS_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_BCRedist_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_SqlBrowser_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_SqlRsFx_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_OWC11_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_Sql_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_AS_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_RS_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_SSCRuntime_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_VstaRedist_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_IS_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_Tools_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_PPESku_Cpu32_1.log  C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20080516_1521\piccola_20080516_1521_BIDS_Cpu32_1.log

    DB:2.49:Third Failed Feb Ctp Install, What Do I Do? fd

    To be honest, I think the set up utility is flakey.  I had major issues one day, and on the next day without any changes, the installation was successful.  I tried the complete removal and install from scratch numerous times, but could never figure out, why it was successful on the next day.
     

  • RELEVANCY SCORE 2.49

    DB:2.49:Vic2fxo W/ 3620 Router xk



    I have a VIC-2FXO card on a 3620 router and the module will not show up when i do sh ver, sh diag, or sh inventory. Im running 12.2 Enterprise IOS. Any suggestions?

    IOS used:

    c3620-jk9o3s-mz.123-5.bin

    c3620-jk8s-mz.122-46a.bin

  • RELEVANCY SCORE 2.49

    DB:2.49:Mpls With Ldp On 3620 a9



    Can anyone advise about 3620 IOS version for MPLS with LDP feature set.I have 3620 router with 16 flash and 64 memory and I need to run MPLS with all LDP features.Which IOS I can use.

    DB:2.49:Mpls With Ldp On 3620 a9


    Hi,

    Please always use feature navigator:

    http://www.cisco.com/go/fn

    But unfortunately i think that 3620 has no image that supports MPLS (unlike 3640 and 3660).

    HTH,

    Mohammed Mahmoud.

  • RELEVANCY SCORE 2.49

    DB:2.49:Sdm On 3620? fj



    I am wondering if it is possible to install Security Device manager on a 3620 router? I found a PDF file on ciscos site that has instructions on how to install SDM, and it states that it is compatible with the 3620, but I followed the instructions, and it doesn't seem like things are working right.

    When I go to cisco's software advisor and look at features for 3620, it doesn't show SDM as an option.

    I am confused, it looks like to me it doesn't work on the 3620?

    DB:2.49:Sdm On 3620? fj


    Hi

    I feel as per your conclusion its not supported in 3620,the data sheet for SDM does confirms that.

    And again the model 3620 and 3640 has reached EOL or EOS stage i feel its not there for those boxes..

    http://www.cisco.com/en/US/products/sw/secursw/ps5318/products_data_sheet0900aecd800fd118.html

    http://www.cisco.com/en/US/products/hw/routers/ps274/ps276/index.html

    regds

  • RELEVANCY SCORE 2.49

    DB:2.49:Installation Problem: Update Tool Bootstrap Not Configured 7m


    I installed Java EE 6 SDK on Windows. The Summary window states an "Incomplete" Overall Status and the Update Tool Bootstrap status is "Not Configured".
    As a result the update tool does not work.

    Running updatetool in the glassfish3/bin-folder from the command line does not help: "Unrecognised execption: no matching package for: pkg-toolkit-incorporation".

    I am just trying to get this to work to enable me to get a hold of the EE 6 Tutorial Component. Failing to get the Update Tool to work, would there be any other way to obtain this?

    Thanks!

    DB:2.49:Installation Problem: Update Tool Bootstrap Not Configured 7m

    I had the same issue. I found that I had previous versions of java installed. It was using Java 5 vs Java 7. I removed the previous versions and was able to run the updatetool from command line under glassfish installationas described in http://java.sun.com/javaee/sdk/javaee6sdkpreview_relnotes.jsp. I do not however see the Java 6 SEE menu item in my start menu but running update tool from command line does launch the update tool.

    Hope this helps.

  • RELEVANCY SCORE 2.49

    DB:2.49:Are The 3620 Network Modules Hot Swappable? cc



    I want to plug in a 2-port FE network mod in a production 3620 router and hope I don't have to bring the router down to insert it.

    DB:2.49:Are The 3620 Network Modules Hot Swappable? cc


    It is not supported

    check this page

    http://www.cisco.com/en/US/products/hw/routers/ps274/products_tech_note09186a0080109510.shtml

    FYI

    on boxes that do support OIR , All interfaces are reset for the sytem to recarve the memory when OIR is performed , so in essence you are taking the box down when performing an OIR .

  • RELEVANCY SCORE 2.49

    DB:2.49:Unable To Update Sql Server Sp3 Kb955706 1a


    I've tried to install this MS Update 3 times - SQL Server SP3 KB955706 - and I keep getting messages that the installation has failed. Please help. I think this has something to do with my ACT software which uses SQL Server. Unfortunately I'm not that computer savvy. The ACT software and SQL Server are operating fine without this SP3 Hotfix but I like to stay updated. Thank you. ----------------- Here's the LOG info: Microsoft SQL Server 2005 9.00.4035.00 ============================== OS Version      : Microsoft Windows XP Home Edition Service Pack 3 (Build 2600) Time            : Tue Mar 31 21:37:59 2009   Machine         : D56VDK21 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.4035.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SQLSupport_1.log -------------------------------------------------------------------------------- Machine         : D56VDK21 Product         : Microsoft SQL Server Native Client Product Version : 9.00.4035.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine         : D56VDK21 Product         : Microsoft SQL Server VSS Writer Product Version : 9.00.4035.00 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SqlWriter_1.log -------------------------------------------------------------------------------- Machine         : D56VDK21 Product         : MSXML 6 Service Pack 2 (KB954459) Product Version : 6.20.1099.0 Install         : Failed Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_MSXML6_1.log Error Number    : 1603 --------------------------------------------------------------------------------  SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt. Time            : Tue Mar 31 21:39:18 2009 List of log files:     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_Core(Local).log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SQLSupport_1.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SQLNCLI_1.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SqlWriter_1.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_MSXML6_1.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_Datastore.xml     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_.NET Framework 2.0.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_Support.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_Core.log     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Summary.txt     C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_SCC.log ---------------------------- Time: 03/31/2009 21:39:29.828 KB Number: KB955706 Machine: D56VDK21 OS Version: Microsoft Windows XP Home Edition Service Pack 3 (Build 2600) Package Language: 1033 (ENU) Package Platform: x86 Package SP Level: 3 Package Version: 4035 Command-line parameters specified:      /quiet      /allinstances Cluster Installation: No ********************************************************************************** Prerequisites Check Status SQLSupport: Passed ********************************************************************************** Products Detected                         Language  Level  Patch Level       Platform  Edition Express Database Services (ACT7)          ENU       SP2    2005.090.3042.00  x86       EXPRESS ********************************************************************************** Products Disqualified Reason Product                                   Reason ********************************************************************************** Processes Locking Files Process Name          Feature               Type          User Name                  PID ********************************************************************************** Product Installation Status Product                   : Express Database Services (ACT7) Product Version (Previous): 3042 Product Version (Final)   : Status                    : Failure Log File                  : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE SQL Express Features      : SQL_Data_Files,SQL_Engine,SQL_SharedTools Error Number              : 11055 Error Description         : Unable to install Windows Installer MSI file ---------------------------------------------------------------------------------- ********************************************************************************** Summary      Unable to install Windows Installer MSI file      Exit Code Returned: 11055

    DB:2.49:Unable To Update Sql Server Sp3 Kb955706 1a

    Hi There,It would be great if you could also post the file C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9Express_Hotfix_KB955706_SQLEXPR.EXE\Files\SQLSetup0002_D56VDK21_MSXML6_1.log . This would help me to determine what casued the failure.ThanksGursin

  • RELEVANCY SCORE 2.49

    DB:2.49:Users Receiving Forefront Alerts 2 Months Late c1


    Hi,
    I have several users who have just received messages below (cut down due to office policies):
    Sent: 10 January 2011 07:00
    Microsoft Forefront Security for Exchange Server has detected a virus.
    Virus name: Exploit:Win32/CVE-2010-3620

    The problem is the users sent the e-mails in Novemeber 2010. I have absolutely no idea why this has happened, Forefront appears
    to be working correctly. Has something changedin theupdate package to cause this? Can anyone shed any light on it?

    Update: exchange is working fine, no problems reported.

    Regards

    Stephen

    DB:2.49:Users Receiving Forefront Alerts 2 Months Late c1

    Hi,

    Thank you for the post.

    What do you find on Incidents or Quarantine? Did this virus detect by real-time scan or manual scan?

    Regards,Nick Gu - MSFT

  • RELEVANCY SCORE 2.49

    DB:2.49:Bootstrap Clarification 7c



    Does the bootstrap IOS provide basic IP configurations or is this what is used for the "options" available when a router is in ROMMON?

    Every router I have tested by changing "confreg 0x2101" always goes into rommon mode (it's supposed to load the bootstrap). Router models include, 1721, 3620, 3640, 3662, 2610. Any comments?

    DB:2.49:Bootstrap Clarification 7c


    Thanks, that's what I thought it was intended to do.

  • RELEVANCY SCORE 2.49

    DB:2.49:How To Prevent Ospf Update From Bringing Up The Dialer Interface? ca



    I have a 1720 connected to remote site 3620 through one serial and one BRI.

    Right now I am using static route, I intend to use OSPF. How do I configure to prevent OSPF bring up the dialer interface? Is there any related document?

    Thank you.

    DB:2.49:How To Prevent Ospf Update From Bringing Up The Dialer Interface? ca


    Hello,

    you can use ip ospf demand-circuit and ip ospf cost command to suppress ospf to bringing up dialer interface and using serial as primary link

    http://www.cisco.com/warp/public/104/dc.html

    best regards

  • RELEVANCY SCORE 2.49

    DB:2.49:Slow Performance Of Cisco 3600 Router f3



    Hello all

    I'll appreciate if some one please help me to inform why my Cisco Router 3600 running very slow. Here its show version output:

    ------------------------------

    Router#show version

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-IK9S-M), Version 12.2(37), RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-2006 by cisco Systems, Inc.

    Compiled Thu 15-Jun-06 19:17 by pwade

    Image text-base: 0x60008930, data-base: 0x61292000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f

    c1)

    A summary of U.S. laws governing Cisco cryptographic products may be found at:

    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email to

    export@cisco.com.

    cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.

    Processor board ID 26386993

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    Bridging software.

    X.25 software, Version 3.0.0.

    SuperLAT software (copyright 1990 by Meridian Technology Corp).

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    24576K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2142

    -----------------------------------

    Many regards

    Ali

    DB:2.49:Slow Performance Of Cisco 3600 Router f3


    i'm taking Router's CLI via console via a USB to RS232 converter to USB at my pc, when i directly plugged in the console cable to DB-9 it works fine, i think there should be some slow conversion on USB Converter to PC!. im using PL2303 Prolific Driver on my pc for USB to RS232 Converter.

  • RELEVANCY SCORE 2.49

    DB:2.49:3620 Ios Upgrade kf



    I need to work with ISIS in my 3620 router, but I do not have the IOS c3620-j1s3-mz.122-15.T14.bin. What are the inexpensive options to get it?

    DB:2.49:3620 Ios Upgrade kf


    Hi, the IOS version I am looking for is Enterprise Basic, which will be used for 3620 in my personal lab, not commercial. Just wondering if there's an inexpensive way to get it in this community for Cisco certification purposes.

  • RELEVANCY SCORE 2.49

    DB:2.49:Ipv6 On 12.3(5a) On Cisco 3620 Router ax



    Dear Sir,

    I am procuring a Cisco 3620

    Router . I just want to confirm whether 12.3(5a) IOS on Cisco 3620 Router will support IPV6 OR NOT..

    Cisco 3620 Router is having following config.

    Memory

    64 MB Dram – 8MB Flash

    Thanks/Regards

    Atul

    DB:2.49:Ipv6 On 12.3(5a) On Cisco 3620 Router ax


    hi atul

    to have ipv6 support in your 3620 box with ur current code u need to have ip plus flavour of the same ,i feel currently ur having simple plain ip flavour which requires 48MB Dram and 8 MB Flash

    but for the IP PLUS flavour u need to have 48/16 which mean u need to have 16 MB flash in place .

    regds

  • RELEVANCY SCORE 2.49

    DB:2.49:How Do I Install My Hp Deskjet 3620 Printer To My Dell Computer? s1



    How do I install my deskjet 3620 printer to my dell computer?

    DB:2.49:How Do I Install My Hp Deskjet 3620 Printer To My Dell Computer? s1

    13angels wrote:
    How do I install my deskjet 3620 printer to my dell computer?

    Hi,

    The printer can be installed on many computers including Dell computer. Instruction(s) is/are the same on the quick guide document (should be in the box and on the CD which come with the printer). Probably you have misplaced them. Please download them from this link for your Operation System (Select the OS on your machine then click "Next").

    Regards,

  • RELEVANCY SCORE 2.49

    DB:2.49:Deskjet 3620 Power Light Blinking 3m



    Deskjet 3620 Power button light blinking, pressing button does NOT turn off printer, light continues to blink. Checked thoroughly for paper jam, no jam. Used it yesterday w/ no problems.

    DB:2.49:Deskjet 3620 Power Light Blinking 3m


    Hi,

    Do you see a serial of Error Code on the screen? If yes, please unplug the power line and then plug again, power on the Printer, thencheck if the printer has recovered from light blinking or not. thanks.

    If you do not see Error Code on your screen, can you descriibe what you see on the screen?

  • RELEVANCY SCORE 2.49

    DB:2.49:Bootstrap 1f


    Hi,Where can I get bootstrap?Thank'sAlexei

    DB:2.49:Bootstrap 1f

    Hi,Where can I get bootstrap?Thank'sAlexei

  • RELEVANCY SCORE 2.49

    DB:2.49:Sip Termination On Cisco 3620 a7



    Hi,

    I am unable to terminate SIP calls on Cisco 3620. I can terminate H323 calls with no problem.

    My question is does Cisco 3260 support SIP terminations?

    If yes, do we have to give some specific command in configuration order for 3260 to accept SIP calls?

    DB:2.49:Sip Termination On Cisco 3620 a7


    by default your dial-peer voice xxx voip = h323 protocol

    try to add this on your dial-peer

    session protocol sipv2

  • RELEVANCY SCORE 2.49

    DB:2.49:Pri Config For Cisco 3620 - Pri Channelized 3p



    I have a call centre with a 3620 of a 30-Channel PRI interface. This router will base on these channels to call to 18 remote outlets which are using Cisco 1720 with BRI interface as needed.

    Is there any similar configuration samples.

    Please help out.

    TQ

    DB:2.49:Pri Config For Cisco 3620 - Pri Channelized 3p


    Your sample config for remote branches will look like this (dialout dialin)

    interface bri0

    no ip address

    encapsulation ppp

    ip mroute-cache

    dialer pool-member 6

    isdn switch-type basic-xxxx

    isdn incoming-voice modem

    no peer default ip address

    no cdp enable

    ppp authentication chap pap

    ppp multilink

    !

    interface Dialer1

    description to HQ

    ip address 10.0.4.6 255.255.255.252

    encapsulation ppp

    dialer pool 6

    dialer remote-name name1(HQ)

    dialer idle-timeout 300

    dialer string nnnnnnnn

    dialer load-threshold 10 either

    dialer-group 1

    ppp authentication chap

    ppp multilink

    dialer-list 1 protocol ip permit

  • RELEVANCY SCORE 2.49

    DB:2.49:Dump Mem Error mk



    Hi ,

    I have a router cisco 3620 with 1 NM-1E and 1 NM-2E-2W + 1 WIC-1T.

    THis router is configured for 4 TUNNEL GRE and With IPSEC enable on these tunnel.

    The serial iterface is configured as default route. With these configuration there are no problem.

    I attached an other router 2610 (for Internet access) in the same ethernet of the 3620 and after I put in shutdown the serial int of 3620.... I changed the default route on 3620 from serial to the ip address of 2610.

    when I do this operation the 3620 crash. I see that if I disable the crypto map ont the GRE TUNNEL the 3620 don't crash.

    I try to change the IOS fram 12.0 to 12.1 and 12.2.

    Why if my default route on 3620 is serial don't crash with IPSEC enable .... while If my default route is a next hop ip address CRASH .?????

    this is my dump crash:

    ========= Dump bp = 3594978 ======================

    3594878: 0 0 0 0 0 0 0 0

    3594898: 0 0 0 0 0 C07AC01 B0D0E1 15860800

    35948B8: 4500004E CF280000 7F1111E2 AC100171 AC120101 AC61A09 3AB5FC 30300201

    35948D8: 40670 75626C69 63A02302 4180E30 33020100 2010030 15301306 F2B0601

    35948F8: 4018617 2090405 2020C00 5000000 0 0 0 0

    3594918: 0 0 0 0 0 0 0 0

    3594938: 0 0 0 0 0 0 0 0

    3594958: 0 0 0 0 0 0 0 FD0110DF

    3594978: AB1234CD FFFFFFFE 0 6135AB88 6031E348 3594AB8 359484C 80000002

    3594998: FD52E6E0 3085F3 65810800 C07 AC010000 FE2F0002 FD52E6E0 3085F3

    35949B8: 65810800 4500007C 1BA0000 FE2F25D9 D552AD61 D93A38D1 800 45000064

    35949D8: 25F0000 FF322449 D552AD61 D93A38D1 14140000 C07AC01 23F34 A79E0800

    35949F8: 4500003C 8C5B0000 7F015441 AC100202 AC110101 800601F 300EA3C 61626364

    3594A18: 65666768 696A6B6C 6D6E6F70 71727374 75767761 62636465 66676869 0

    3594A38: 0 1 F 40008 C010102 3A544727 0 0

    3594A58: 0 0 0 0 0 0 0 0

    ========= Dump bp-next = 3594AB8 ======================

    35949B8: 65810800 4500007C 1BA0000 FE2F25D9 D552AD61 D93A38D1 800 45000064

    35949D8: 25F0000 FF322449 D552AD61 D93A38D1 14140000 C07AC01 23F34 A79E0800

    35949F8: 4500003C 8C5B0000 7F015441 AC100202 AC110101 800601F 300EA3C 61626364

    3594A18: 65666768 696A6B6C 6D6E6F70 71727374 75767761 62636465 66676869 0

    3594A38: 0 1 F 40008 C010102 3A544727 0 0

    3594A58: 0 0 0 0 0 0 0 0

    3594A78: 0 0 0 0 0 0 0 0

    3594A98: 0 0 0 0 0 0 0 FD0110DF

    3594AB8: AB1234CD FFFFFFFE 0 6135AB88 6031E348 3594BF8 359498C 8000008C

    3594AD8: 1 0 AFACEFAD 0 10001 0 0 61D18F2C

    3594AF8: 0 0 0 0 0 0 0 0

    3594B18: 0 0 0 FF FFFF0000 C07AC01 23F34 A79E0800

    3594B38: 4500003C 8C5D0000 7F01543F AC100202 AC110101 8005E1F 300EC3C 61626364

    3594B58: 65666768 696A6B6C 6D6E6F70 71727374 75767761 62636465 66676869 F2B0601

    3594B78: 4018617 2090405 2060100 5000000 0 0 0 0

    3594B98: 0 0 0 0 0 0 0 0

    ========== Dump bp-previous = 359484C =====================

    359474C: 0 0 0 0 0 0 0 30

    359476C: 85F36590 23F34 A79E0800 4500003C 8C5E0000 7F015406 AC100202 AC10013A

    359478C: 8005D1F 300ED3C 61626364 65666768 696A6B6C 6D6E6F70 71727374 75767761

    35947AC: 62636465 66676869 F2B0601 4018617 2090405 2030A00 5000000 0

    35947CC: 0 0 0 0 0 0 0 0

    35947EC: 0 0 0 0 0 0 0 0

    359480C: 0 0 0 0 0 0 0 0

    359482C: 0 0 FD0110DF AB1234CD FFFFFFFE 0 6135AB88 6031E348

    359484C: 3594978 359470C 8000008C 1 0 AFACEFAD 0 10001

    359486C: 0 0 61D18CC0 0 0 0 0 0

    359488C: 0 0 0 0 0 0 0 FFFF

    35948AC: FFFFFFFF 9027E5 71880806 10800 6040001 9027E5 7188AC10 6ACA0000

    35948CC: 0 AC1001CA 0 0 0 0 E30 33020100

    35948EC: 2010030 15301306 F2B0601 4018617 2090405 2020C00 5000000 0

    359490C: 0 0 0 0 0 0 0 0

    359492C: 0 0 0 0 0 0 0 0

    ============================================

    %Software-forced reload

    Queued messages:

    00:05:11: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

    00:05:06: validblock_diagnose, code = 1

    00:05:06:

    current memory block, bp = 0x3594978,

    memory pool type is I/O

    00:05:06: data check, ptr = 0x35949A0

    00:05:06:

    next memory block, bp = 0x3594AB8,

    memory pool type is I/O

    00:05:06: data check, ptr = 0x3594AE0

    00:05:06:

    previous memory block, bp = 0x3594838,

    memory pool type is I/O

    00:05:06: data check, ptr = 0x3594860

    00:05:10: %SYS-3-OVERRUN: Block overrun at 3594978 (red zone 65810800)

    -Traceback= 60360798 60363388 60364458 603646A0 6035336C 60353358

    00:05:10: %SYS-6-MTRACE: mallocfree: addr, pc

    62146950,6036CC58 62146950,3000003A 62146950,6036CD88 62146950,6036CC58

    62146950,3000003A 62146950,6036CD88 62146950,6036CC58 62146950,3000003A

    00:05:10: %SYS-6-MTRACE: mallocfree: addr, pc

    62146950,6036CD88 61C91E30,5000004C 61C91EF0,602D9C30 61C91E30,602D9C30

    61CB5178,5000004E 61CB523C,602D9C30 61CB5178,602D9C30 61BAEE24,60372AC8

    00:05:10: %SYS-6-BLKINFO: Corrupted redzone blk 3594978, words 2, alloc 6031E348, InUse, dealloc C07, rfcnt FD52E6E0

    -Traceback= 6035E404 603607AC 60363388 60364458 603646A0 6035336C 60353358

    00:05:10: %SYS-6-MEMDUMP: 0x3594978: 0xAB1234CD 0xFFFFFFFE 0x0 0x6135AB88

    00:05:10: %SYS-6-MEMDUMP: 0x3594988: 0x6031E348 0x3594AB8 0x359484C 0x80000002

    00:05:10: %SYS-6-MEMDUMP: 0x3594998: 0xFD52E6E0 0x3085F3 0x0 0x0

    === Flushing messages (01:05:12 CET Mon Mar 1 1993) ===

    Queued messages:

    00:05:12: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

    00:05:12: %SYS-3-LOGGER_FLUSHED: System was paused for 00:00:01 to ensure console debugging output.

    No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM

    *** System received a Software forced crash ***

    signal= 0x17, code= 0x24, context= 0x61a98830

    PC = 0x6037bf74, Cause = 0x420, Status Reg = 0x34018002

    System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    oopyright (c) 1999 by cisco Systems, Inc.

    DB:2.49:Dump Mem Error mk


    You get the same results with newer code? This core dump says "System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)" which is pretty old. I would test with 12.1 or 12.2 code and if the results are identical, perhaps its a memory or hardware issue. It will be difficult to troubleshoot here.

  • RELEVANCY SCORE 2.49

    DB:2.49:Dom Cleanup Of Richfaces Bootstrap Components a1



    As per RFSBOX-47, during the DOM cleanup in richfaces.js I've fired a cleanup event that is listened to by the body. The body in turn fires a cleanDom event that is listened to by each of the Bootstrap components. This event triggers the components to destory themselves if they are contained within the DOM tree of the root element of the AJAX update.

    However, it turns out this cleanup code is superfluous, as the jQuery UI wideget factory based Bootstrap components get destroyed when jQuery.cleanData() is called in richfaces.js. I've decided to leave the new event driven cleanup code in place however, as we should eventually move the cleanup code currently in richfaces.js into it's own file with the current component set, and triggered by the same event that triggers the bootstrap component cleanup.

    Something to keep in mind though when trobuleshooting the component cleanup.

    Brian

    DB:2.49:Dom Cleanup Of Richfaces Bootstrap Components a1


    Nice investigations Brian,

    I think this is related commit in jQuery UI:

    http://bugs.jqueryui.com/ticket/6008

    Better for us, we don't need to care about this anymore, just test it properly.

  • RELEVANCY SCORE 2.49

    DB:2.49:How To Disable Automatic Timesheet Population With Project Tasks? ad


    We are using Administrative Time in Project Server timesheets for time tracking, and at this point we do not want users to update project task actuals through timesheets. This works fine. However, every time a project task is assigned to a user, it automatically
    appears in that user's timesheet as a line item, which creates confusion. We have set Default Timesheet Creation Mode in PWA Settings to No prepopulation, but it did not change this behavior. Is there a way in Project Server to prevent assigned
    tasks from appearing automatically in users' timesheets?

  • RELEVANCY SCORE 2.49

    DB:2.49:Show Ip Pim Rp Mapping Command 73



    I have an mcast query.

    We run PIM-SM using BSRs.

    There are about 23 mcast groups and only 7 are active.

    Every 60 seconds, the group to RP mappings are flooded through the network hop-by-hop via a PIM message type 4 packet (bootstrap).

    In this packet there are what appears to be the active mcast groups in the body of the packets.

    This co-insides with the output of the "show ip pim rp" command.

    When you do a "show ip pim rp mapping" command you get the following, which indicates (via the expiry timer) that you get an update of all permitted mcast groups (via some update packet - maybe the bootstrap packet?), but I don't see any reference to all of the 23 mcast groups in the bootstrap packet, only the 7 active mcast groups

    Can anyone help?

    DB:2.49:Show Ip Pim Rp Mapping Command 73


    Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

    If anyone else in the forum has some advice, please reply to this thread.

    Thank you for posting.

  • RELEVANCY SCORE 2.49

    DB:2.49:Cisco 3620 As Dhcp Client fz



    I have a 3620 I am connecting to a cable modem and I cannot get a static address from the cable company to assign to the interface. Have people had problems with the routers renewing the addresses without having to reboot?

    DB:2.49:Cisco 3620 As Dhcp Client fz


    Hello,

    can you post the configuration of your 3620 ?

    Regards,

    GP

  • RELEVANCY SCORE 2.48

    DB:2.48:3620 Wants To Save Startup-Config File To Flash???? s8



    I just got in a 3620 router and was configuring it to talk on an Ethernet segment as a gateway. When I issued the "copy run start" command I was suprised to see a prompt stating "Erasing the flash filesystem will remove all files! Continue?"

    Why would the 3620 try to save the startup-config to flash? Can I change this behavior?

    DB:2.48:3620 Wants To Save Startup-Config File To Flash???? s8


    I am thinking it is trying it to write the running config to device flash:(possible bug) when you just issue a "copy run start". You might already have a file name "start" in flash(do a "dir flash:" to check).

    Try the following "copy run startup-config" or just a "wr mem" and see if you see the same behavior.

    It should still not do this when you and I am thinking it is a bug

  • RELEVANCY SCORE 2.48

    DB:2.48:Using Vwic2-2mft-T1/E1 Card With 3620 And Nm-2w Or Nm-1fe2w p8



    possible?

  • RELEVANCY SCORE 2.47

    DB:2.47:Twitter Bootstrap cx



    Are you using Twitter Bootstrap to create websites? Please elaborate.

    DB:2.47:Twitter Bootstrap cx


    You can try the DMXzone Bootstrap extension for Dreamweaver. It has a great integration in design view and you can create responsive layouts pretty easy. Oh, yes it's also free of charge, all you need to do is download and install it in DW.

  • RELEVANCY SCORE 2.47

    DB:2.47:Wic-1enet In 3620 Problem d3



    Hi. I have a problem. Last week a bought a Cisco 3620 router with 2x Ethernets and 2xToken rings. I had put a wic-1enet card from my cisco 1720 router to the 3620. It doesn't work with this interface. Waht is the problem? the cisco IOS verison is 12.2(23)

  • RELEVANCY SCORE 2.47

    DB:2.47:Wsus af


     
    Pessoal, Boa tarde
     
    Existe alguma maneira de fazer com que o WSUS funcione da mesma forma que o WIndows Update?.
    Estive pensandoq ue ao invés de deixar as estações se conectarem ao serviço, eu poderia acessar o wsus via browser e escolher as atualizações que deverão ser instaladas.
     
    Caso alguem conheça alguma forma de executar isso ou algum outro produto, por favor me informe.
     
     
    Obrigado
     

    DB:2.47:Wsus af

     
    Se você deseja selecionar as atualizações disponíveis na sua base de dados do WSUS em qualquer pc do seu domínio, faça o seguinte..
     
     
     1. Configure uma GPO de configuração do WSUS na rede local.
         - Coloque a opção de baixar as atualizações automaticamente.
         - Agende um horário.
       
     
     
    Com esses passos acima, no harário agendado deverá aparecer um ícone da central de segunrança no lado inferior esquerdo próximo ao relógio, então clique duas vezes e escolha a opção de instalação avançada, depois é só correr pro abraço e selecionar quais atualizações você deseja.
     
     
     
     
    Espero ter contribuído, qualquer dúvida disponho.
     
     
     
     

  • RELEVANCY SCORE 2.46

    DB:2.46:Problem In 3620 7j



    We are facing the problemwhen we are booting the 3620 router.continuosly it is booting itself and showing the error which is attached here..please suggest us what the problem is....

    thanks in advance

    DB:2.46:Problem In 3620 7j


    Dhiman

    I am not clear about the specifics of this error but clearly this IOS image is not working for this device. Has this router been running and has just developed this problem? If so it might suggest a problem with flash memory. To solve it investigate the flash and fix any problem detected.

    Or is this an image that has just been loaded into the router? If so that would suggest that the image is corrupted or is not valid for this device. To fix it get a different image and try to load it.

    Of course if you have a maintenance contract on this router you can open a case with TAC and they will be able to tell you more details about what the problem is.

    HTH

    Rick

  • RELEVANCY SCORE 2.46

    DB:2.46:Ogre - Help Request Post-Libtool Slay jj



    the ogre package is currently in the AURim wanting to update the pkg to work post-libtool slay, and also update to 1.0.6

    the ogre build requires libtool, and since libtool is quite dead.. i need some help building it..

    if i run the required
    aclocal
    ./bootstrap

    DB:2.46:Ogre - Help Request Post-Libtool Slay jj


    it seems to still have trouble even _with_ the la files.
    but youve atleast confirmed what i thought.
    when i get the time ill tinker with it some more..

    thanks for the help

  • RELEVANCY SCORE 2.46

    DB:2.46:3620 With An Intermittent Noisy Fan pf



    Hi

    We have a 3620 with an intermittent noisy fan. Is this a sign of fan failure (bearings going) or does the fan respond to the temperature of the router?

    Thanks in advance.

    DB:2.46:3620 With An Intermittent Noisy Fan pf


    I have the same problem in my 3620 too. One moment it was running fine and the next moment I thought a train was coming through my home. Needless to say, I powered it off the next day due to the noise - need to check the fan for any dirt and clean as necessary.

    May need to visit E-bay again!! :(

  • RELEVANCY SCORE 2.46

    DB:2.46:3620 Router With Comcast Cable aj



    Hello,

    I am having a problem connecting to the Internet thru comcast cable via my 3620 router.

    I have tried nat overloading to no success.

    Thank you

    DB:2.46:3620 Router With Comcast Cable aj


    Joshua

    It is slightly helpful to know that you have tried nat overload to no success. It would be much more helpful to know the details of what you have configured.

    If you would post the details provided to you by Comcast for your connection it would be a good start. And if you would post the configuration of the router (the complete config) it would give us much better information to work with.

    HTH

    Rick

  • RELEVANCY SCORE 2.46

    DB:2.46:Ios Upgrade f7



    Could you suggest me which IOS I can use to upgrade my CISCO 3620 with VOIP capabilty ?

    Now the router is running with c3620-is-mz.122-13b.bin, I tried to load  c3620-jsx-mz.122-40.bin, but after the reload I got a memory error, unfortunatly I couldn't same the error message 

    System flash directory:File  Length   Name/status  1   11199660  c3620-is-mz.122-13b.bin  2   13310136  c3620-jsx-mz.122-40.bin[24509924 bytes used, 8520220 available, 33030144 total]32768K bytes of processor board System flash (Read/Write)

    XXXXXXX#show mem                Head    Total(b)     Used(b)     Free(b)   Lowest(b)  Largest(b)Processor   61D42320    31186144    12413784    18772360    17918756    17610592      I/O    3B00000     5242880     2945004     2297876     2220656     2295900

    Actual IOS

    XXXXXXX#show verCisco Internetwork Operating System SoftwareIOS (tm) 3600 Software (C3620-IS-M), Version 12.2(13b), RELEASE SOFTWARE (fc1)Copyright (c) 1986-2003 by cisco Systems, Inc.Compiled Fri 21-Feb-03 09:52 by pwadeImage text-base: 0x60008930, data-base: 0x61112000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    XXXXXXX uptime is 3 weeks, 4 days, 3 hours, 51 minutesSystem returned to ROM by power-onSystem restarted at 09:11:24 CET-1CEST-2 Tue Oct 27 2009System image file is "flash:c3620-is-mz.122-13b.bin"

    cisco 3620 (R4700) processor (revision 0x81) with 60416K/5120K bytes of memory.Processor board ID 18119770R4700 CPU at 80Mhz, Implementation 33, Rev 1.0Channelized E1, Version 1.0.Bridging software.X.25 software, Version 3.0.0.SuperLAT software (copyright 1990 by Meridian Technology Corp).Primary Rate ISDN software, Version 1.1.1 Ethernet/IEEE 802.3 interface(s)62 Serial network interface(s)2 Channelized E1/PRI port(s)DRAM configuration is 32 bits wide with parity disabled.29K bytes of non-volatile configuration memory.32768K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    Thanks

    DB:2.46:Ios Upgrade f7


    Well, according to software advisor you should be able to run the jsx image as it needs 64Mb

    DRAM and16Mb flash.

    However try this one instead. It is the IP Plus image for release 12.2(46)a and this does support VOIP according to sofftware advisor - c3620-is-mz.12.2-46a

    Jon

  • RELEVANCY SCORE 2.46

    DB:2.46:Hp Deskjet 3620 Does Not Print From The Internet 19



    My hp deskjet 3620 goes offline whenever I try to print a page from IE 11. Is the problem the printer? I can print outside of ie 11.

    DB:2.46:Hp Deskjet 3620 Does Not Print From The Internet 19


    esac42,

    Glad you are back up and printing, I suggest calling our technical support at 800-474-6836 if you need a replacement power supply. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl

    Thank you again!!

  • RELEVANCY SCORE 2.46

    DB:2.46:Problem Connecting To Access Server zk



    Hi,

    Remote users can not connect via analog modem or ISDN to 3620 access server.

    The debug (debug ppp authentication, debug ppp negotiation, debug isd q921, debug isdn q931) output of unsuccessful connection from 4601111(starts 21:51:15,ends 21:51:39) is in the attachment, configuration of 3620 is also in the attachment.

    Any ideas?

    show modem version and sh ver are following3620#sh modem version

    Slot 1:MICA-6DM Firmware, Source - flash:/mica-modem-pw.2.9.4.0.bin

    CP ver 2940 - 7/24/2002, CheckSum BB345F13.

    SP ver 2940 - 7/24/2002.

    MICA 0: HW Version 1.0, Serial Number 25568550.

    MICA 1: HW Version 1.0, Serial Number 25568673.

    MICA 2: HW Version 1.0, Serial Number 29370461.

    MICA 3: HW Version 1.0, Serial Number 29528420.

    MICA 4: HW Version 1.0, Serial Number 14812911.

    c3620#sh version

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-I-M), Version 12.2(27), RELEASE SOFTWARE (fc3)

    Copyright (c) 1986-2004 by cisco Systems, Inc.

    Compiled Tue 02-Nov-04 21:42 by kellmill

    Image text-base: 0x60008930, data-base: 0x60A3E000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    c3620 uptime is 5 days, 22 hours, 53 minutes

    System returned to ROM by reload

    System image file is "flash:c3620-i-mz.122-27.bin"

    cisco 3620 (R4700) processor (revision 0x81) with 28672K/4096K bytes of memory.

    Processor board ID 22866774

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    Channelized E1, Version 1.0.

    MICA-6DM Firmware: CP ver 2940 - 7/24/2002, SP ver 2940 - 7/24/2002.

    Bridging software.

    X.25 software, Version 3.0.0.

    Primary Rate ISDN software, Version 1.1.

    1 FastEthernet/IEEE 802.3 interface(s)

    31 Serial network interface(s)

    30 terminal line(s)

    1 Channelized E1/PRI port(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    8192K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    DB:2.46:Problem Connecting To Access Server zk


    ASA-AIP-CLI(config)#show running-config

    ASA Version 7.2(2)

    !

    hostname ASA-AIP-CLI

    domain-name corp.com

    enable password xxx

    names

    !

    interface Ethernet0/0

    nameif Outside

    security-level 0

    ip address 172.22.1.163 255.255.255.0

    !

    interface Ethernet0/1

    nameif inside

    security-level 100

    ip address 172.20.1.1 255.255.255.0

    !

    interface Ethernet0/2

    nameif DMZ

    security-level 50

    ip address 192.168.1.1 255.255.255.0

    !

    interface Ethernet0/3

    nameif DMZ-2-testing

    security-level 50

    ip address 192.168.10.1 255.255.255.0

    !

    interface Management0/0

    shutdown

    no nameif

    no security-level

    no ip address

    !

    passwd xxx

    ftp mode passive

    dns server-group DefaultDNS

    domain-name corp.com

    pager lines 24

    mtu inside 1500

    mtu Outside 1500

    mtu DMZ 1500

    no failover

    icmp unreachable rate-limit 1 burst-size 1

    no asdm history enable

    arp timeout 14400

    nat-control

    route Outside 0.0.0.0 0.0.0.0 172.22.1.1 1

    timeout xlate 3:00:00

    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00

    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00

    timeout uauth 0:05:00 absolute

    no snmp-server location

    no snmp-server contact

    snmp-server enable traps snmp authentication linkup linkdown coldstart

    telnet timeout 5

    ssh timeout 5

    console timeout 0

    !

    class-map inspection_default

    match default-inspection-traffic

    !

    !

    policy-map type inspect dns preset_dns_map

    parameters

    message-length maximum 512

    policy-map global_policy

    class inspection_default

    inspect dns preset_dns_map

    inspect ftp

    inspect h323 h225

    inspect h323 ras

    inspect netbios

    inspect rsh

    inspect rtsp

    inspect skinny

    inspect esmtp

    inspect sqlnet

    inspect sunrpc

    inspect tftp

    inspect sip

    inspect xdmcp

    !

    service-policy global_policy global

    prompt hostname context

    Cryptochecksum:xxx

    : end

    ASA-AIP-CLI(config)#

  • RELEVANCY SCORE 2.45

    DB:2.45:Zac : When I Must Generate A New Bootstrap ? ad



    Under which conditions a new bootstrap must be recreated instead
    of using the current,
    where only a update would be necessary ?

    DB:2.45:Zac : When I Must Generate A New Bootstrap ? ad


    Under which conditions a new bootstrap must be recreated instead
    of using the current,
    where only a update would be necessary ?

  • RELEVANCY SCORE 2.45

    DB:2.45:I Cant Download Vc#2008 Express Edition, The Bootstrap Dont Work. pc


    Hi, every time I want to download Visual C# 2008 express edition using the bootstrap, it cycle over 5 time (preprogrammed in the bootstrap), and it download nothing.
    ¿What can I do?
    ¿Is possible download an .img or .iso file directly rather the bootstrap?
    I don't have a dvd burner, only a cd/cdrw burner, so download the all-in-one dvd is useless in my case.
    ¿I'm missing something, some setup for example, in IE7 or in my PC or something else?
     
    My PC:
    Windows XPSP2 fully updated (including Tuesday 8 update), spanish version. 100% original.
    IE7, spanish version.
    Internet: broadband cable modem conection.
    Antivirus: AVG 7.5.516
    Firewall: Comodo pro 3.0.14.276
    Other: Comodo BOClean 4.25
     
    ¿Somebody can help me? Thanks in advace.

    DB:2.45:I Cant Download Vc#2008 Express Edition, The Bootstrap Dont Work. pc

    Hi,
     
    The Visual Studio 2008 Express Editions All-In-One DVD (which contains Visual C# 2008 Express) can be downloaded form this site:
      http://www.microsoft.com/express/download/
    It is at the bottom of this page.
     
    By the way, the CD images for Visual Studio 2005 Express Editions are located here:
      http://msdn2.microsoft.com/en-us/express/aa718401.aspx
     
    Best Regards
    Chunsheng Tang

  • RELEVANCY SCORE 2.45

    DB:2.45:Ios For 3620 zk



    Is there any latet IOS for 3620 (12.0) router ....is there any..please gine the link...thanks in advance

    DB:2.45:Ios For 3620 zk


    Dhiman

    There are several aspects to take into account when choosing an image file for a router. You must know how much memory to run the code and how much flash to store the image are available in the router. Various versions would have different requirements for memory and for flash. You would also need to consider which feature set you need. There are basic feature sets (like IP only) which give you basic router functions and there are more advanced feature sets which give other functionality such as the ability to support encryption, or to to firewall style filtering. If you could tell us how much memory and flash are available and what set of features you need then we could help to identify versions for you.

    Your question asked about the latest IOS. According to the Feature Navigator on the Cisco site the latest version for 3620 is 12.3(24a) and a version implementing IP feature set would be c3620-i-mz.123-24a.bin.

    Or if you were really looking for the most recent in the 12.0 version it would be 12.0(28d). And the image with the IP only feature set would be c3620-i-mz.120-28d.bin.

    You can find more of this information at www.cisco.com/go/fn

    HTH

    Rick

  • RELEVANCY SCORE 2.45

    DB:2.45:Cisco-3620 Reloads Unexpectedly sz



    Hi Cisco

    We have 2 routers that keeps reloading at the same time with similar error. We haven't had any change on both routers. I tried to find what

    Both of them get similar error:

    System returned to ROM by bus error at PC 0x612CC298

    SDZC010100 uptime is 48 minutes

    System returned to ROM by bus error at PC 0x612CC298, address 0x472C7FB4 at 21:19:42 edt Mon Aug 20 2007

    System restarted at 21:21:50 edt Mon Aug 20 2007

    System image file is "flash:c3620-ik9s-mz.122-7c.bin"

    cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes of memory.

    Processor board ID 24808943

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    Bridging software.

    X.25 software, Version 3.0.0.

    SuperLAT software (copyright 1990 by Meridian Technology Corp).

    1 Ethernet/IEEE 802.3 interface(s)

    1 Serial network interface(s)

    1 Virtual Private Network (VPN) Module(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    32768K bytes of processor board System flash (Read/Write)

    Configuration register is 0x2102

    SDZC010100#

    SDZC010200#show version

    Cisco Internetwork Operating System Software

    IOS (tm) 3600 Software (C3620-IK9S-M), Version 12.2(7c), RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-2002 by cisco Systems, Inc.

    Compiled Sat 11-May-02 16:47 by pwade

    Image text-base: 0x600089A8, data-base: 0x61314000

    ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    SDZC010200 uptime is 58 minutes

    System returned to ROM by bus error at PC 0x612CC298, address 0x4644DDD4 at 21:19:26 edt Mon Aug 20 2007

    System restarted at 21:21:38 edt Mon Aug 20 2007

    System image file is "slot0:c3620-ik9s-mz.122-7c.bin"

    cisco 3620 (R4700) processor (revision 0x81) with 45056K/4096K bytes of memory.

    Processor board ID 22865905

    R4700 CPU at 80Mhz, Implementation 33, Rev 1.0

    Bridging software.

    X.25 software, Version 3.0.0.

    SuperLAT software (copyright 1990 by Meridian Technology Corp).

    1 Ethernet/IEEE 802.3 interface(s)

    1 Serial network interface(s)

    1 Virtual Private Network (VPN) Module(s)

    DRAM configuration is 32 bits wide with parity disabled.

    29K bytes of non-volatile configuration memory.

    8192K bytes of processor board System flash (Read/Write)

    16384K bytes of processor board PCMCIA Slot0 flash (Read/Write)

    Configuration register is 0x2102

    DB:2.45:Cisco-3620 Reloads Unexpectedly sz


    Hello,

    there is a bug in the IOS (i believe the IOS before 12.2.15, but not sure). Upgrading the IOS should solve this problem. I had the same problem with a 3660.

    Kind regards