• RELEVANCY SCORE 3.63

    DB:3.63:David S. Hot To You Set Your Hard Drive To Never Sleep j3





    This question has added to the end of another thread, but I wanted to make sure it was anserwed and points awarded.

    How do you set your drives to never sleep

    DB:3.63:David S. Hot To You Set Your Hard Drive To Never Sleep j3

    System Preferences:Energy Saver

    There is a checkbox that says "Put the hard disk(s) to sleep when possible"

    Do not check it.

  • RELEVANCY SCORE 2.82

    DB:2.82:Changing Hot Sync Id z9





    Can you change your Hot Sync ID on your Palm device once it's originally set up? If so, how do you change it?
    Post relates to: Treo 700p (Sprint)

    DB:2.82:Changing Hot Sync Id z9

    If you change your Hotsync Name be prepared to deal with the developers of ALL third-party applications for which you have purchased a license and have a registration code. Registrations are frequently tied to Hotsync Name/ID and you will have to get new codes.
    Post relates to: Palm TX

  • RELEVANCY SCORE 2.73

    DB:2.73:Hot Sync Between 2 Palm Zire M150'S --- Plz Help 9z






    Is it possible to hot sync between 2 Palm PDA's without using a computer?

    Thanks for your help.

    Post relates to: Palm m100

    DB:2.73:Hot Sync Between 2 Palm Zire M150'S --- Plz Help 9z

    Thanks for coming to post your feedback.
    Post relates to: None

  • RELEVANCY SCORE 2.70

    DB:2.70:Oneplus Invites - You Have Been Warned! j8


    Its been in the announcements all along people:

    David S. said:

    It won’t be long now - in fact, those of you with invites will start seeing them in your inbox on June 6th! Click to expand...

    DB:2.70:Oneplus Invites - You Have Been Warned! j8

    enneue said:

    i dont know about this now i think theyre fucking with us with these invitesClick to expand...

  • RELEVANCY SCORE 2.68

    DB:2.68:Power Pack Is Getting Very Hot , Is This Normal? zm



    H

    i i have just brought a pillion dv6-6180se and i am finding the power pack is getting very hot , is this normal?

    The power pack is only 4 days old, and is getting so hot when i am running anything ,to the point you can not hold it .

    I have had to swich it off as i read they can set fire to your house !.

    Is the right for my power pack to do this , the pc i have is apillion dv6-6180se.

    Could somone help me with this as i am now worried about leaving the pc on.

    All the best

    Darren

    DB:2.68:Power Pack Is Getting Very Hot , Is This Normal? zm


    H

    i i have just brought a pillion dv6-6180se and i am finding the power pack is getting very hot , is this normal?

    The power pack is only 4 days old, and is getting so hot when i am running anything ,to the point you can not hold it .

    I have had to swich it off as i read they can set fire to your house !.

    Is the right for my power pack to do this , the pc i have is apillion dv6-6180se.

    Could somone help me with this as i am now worried about leaving the pc on.

    All the best

    Darren

  • RELEVANCY SCORE 2.67

    DB:2.67:Dj's, Hosts Wanted @ Beach Party Club !! 19



    Hey Gang

    Were a Cape Cod crossed w/ Flordia kinda beach club ( I know pic that kids rotfl ) We looking for people that want to have fun !!! And Yes Furries welcome !! We have lovely couples dancing on the beach aand cuddly bonfire for those hot summer nights !!! We pay 250 a set plus tips !! This is a great to get to know someone closer or make new freinds club !! We have live acts here everyweek !! Never know what I'd do next !! DJ's your allowed to spin what you love MUSIC !! I dont tell you what you canrt play (Yes I have been told that by clubs I DJed for ). Come check us out you'll love what you see!!

    IM me AlphaFemale Destiny in game w/ any questions love to meet you ^^

    DB:2.67:Dj's, Hosts Wanted @ Beach Party Club !! 19


    Hey Gang

    Were a Cape Cod crossed w/ Flordia kinda beach club ( I know pic that kids rotfl ) We looking for people that want to have fun !!! And Yes Furries welcome !! We have lovely couples dancing on the beach aand cuddly bonfire for those hot summer nights !!! We pay 250 a set plus tips !! This is a great to get to know someone closer or make new freinds club !! We have live acts here everyweek !! Never know what I'd do next !! DJ's your allowed to spin what you love MUSIC !! I dont tell you what you canrt play (Yes I have been told that by clubs I DJed for ). Come check us out you'll love what you see!!

    IM me AlphaFemale Destiny in game w/ any questions love to meet you ^^

  • RELEVANCY SCORE 2.66

    DB:2.66:Palm Vx Hot Sync Not Working 1d



    All of a sudden, my palm will not hot sync. It says "The connection between your handheld computer and the desktop could not be established. Please check your setup and try again." Can someone help me and tell me what to do in order to hot sync again.

    Thank you.

    DB:2.66:Palm Vx Hot Sync Not Working 1d


    First thing to try is to reboot your PC, soft reset the Vx, and try again.

    If you have not already done so, I suggest you go through the Hotsync Troubleshooting support article from Palm, linked below. It covers the causes of, and the and solutions to the vast majority of Hotsync issues. Hope it helps...if not, please post back.http://tinyurl.com/g5jkh

  • RELEVANCY SCORE 2.66

    DB:2.66:Personal Hot Spot 31



    How do you set up a personal hot spot for a iPhone 4s

    DB:2.66:Personal Hot Spot 31


    settings-cellular-set up personal hotspot

    Good Luck

  • RELEVANCY SCORE 2.65

    DB:2.65:Thread: S/Mime And Gw Pop Client 89


    We\'re using GW as a POP client on your internet side ... we have no

    backend agents running right now; although we plan to in the future. Is

    it possible to use S/MIME Encryption and Certificates without a backend

    (MTA\'s, POA\'s, ConsoleOne snapins, ...)?

    David

    DB:2.65:Thread: S/Mime And Gw Pop Client 89

    dave,

    It appears that in the past few days you have not received a response to your

    posting. That concerns us, and has triggered this automated reply.

    Has your problem been resolved? If not, you might try one of the following options:

    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp

    - Check all of the other support tools and options available at

    http://support.novell.com.

    - You could also try posting your message again. Make sure it is posted in the

    correct newsgroup. (http://support.novell.com/forums)

    Be sure to read the forum FAQ about what to expect in the way of responses:

    http://support.novell.com/forums/faq_general.html

    If this is a reply to a duplicate posting, please ignore and accept our apologies

    and rest assured we will issue a stern reprimand to our posting bot.

    Good luck!

    Your Novell Product Support Forums Team

    http://support.novell.com/forums/

  • RELEVANCY SCORE 2.64

    DB:2.64:Single Hot Corner, Multiple Options? 7c


    Hi guys,I recently updated my iMac from app store's downloadable Mountain Lion (10.8.2).And I bought a Mac Pocket Book for learning about this new OS.Here's the thing confused me a lot.The author said these:Use the drop-down menus to set options for any corner you want. After that, when you move your mouse to that corner, your Mac fires up the screensaver (or does what you told it toput the display to sleep, launch Mission Control, or whatever). The only downside of setting hot corners is that Apple gives you eight options for each corner, so unless you want to use a modifier key with the corner, you dont have enough corners to use all the options.By using modifier keys (you can choose from Shift, ⌘, Option, and Control), you can get a single corner to do many different things. To add a modifier key to a hot corner, hold down the modifier key while you select what you want the hot corner to do from the Active Screen Corners windows menus. Using modifiers with hot corners not only gives you extra flexibility, but it also prevents you from accidentally invoking the hot corner action when youre mousing around.But I cannot set a single corner with multiple options! Could you guys can do that???

  • RELEVANCY SCORE 2.64

    DB:2.64:Grouping In Landesk x1



    Is it possible to group Hot Topics under 1 single icon rather than having to create a Console to place your Hot Topics in? I want to be able to link all related Hot Topics in a single group which you can expand to then select the Hot Topic you want. At the moment I just have to create an endless list of Hot Topics with no real order?

    Please advise.

    DB:2.64:Grouping In Landesk x1


    Well not directly, but you can get a similar effect.

    Create a series of shortcut groups with the top level names you want and put the templated processes in there in the order you want. Then use the menu entry Shortcuts in Console to select select the shortcut group and the process within that. This will not work with WebAccess though.

    The other alternative I've used is to create a category on the incident called Hot Topic and add in the various attributes you want to copy and administer in the values you want into each level of the category. Then use Windows Business copy rules to copy the contents of the particular Hot Topic attributes into the incident. When someone selects the Hot Topics, the values will be copied. A different approach but might be more what you had in mind and should also work in WebAccess

  • RELEVANCY SCORE 2.64

    DB:2.64:If I Leave My Broadband On It Gets Hot Is That Ok 38


    You have said it,s oK to keep my broadband on but it gets hot is that oK

    DB:2.64:If I Leave My Broadband On It Gets Hot Is That Ok 38


    All power supplies will get hot especially in the summer months. My laptop PSUs are really hot at this time of the year, they are like little handheld heaters, useful for the winter tho'

  • RELEVANCY SCORE 2.63

    DB:2.63:Poweredge R720xd Chassis Extremely Hot 7z



    I have two new PowerEdge R720xd servers. The chassisare extremely hot. (Turbo is disabled, system profile is set to Performance Per Watt). Compared to my 11G servers, these R720s feel likea coffeepotburner constantly on.

    Is anyone else having this issue? Is this normal (i.e. if you compare your R720s to your 11G or older servers, are the R720 chassis dramatically hotter)?

    Thanks!

    DB:2.63:Poweredge R720xd Chassis Extremely Hot 7z


    Sorry, no. The heat is on the top and bottom of the chassiswith the hottest partsstarting toward the middle halfthrough the back. The heat is evenly distributed. I have 12 3.5inch 15K drives in the front, but nothing added in the back (it has two 1100W power supplies and a 4x1GbE Broadcom daughter card in the back, no additional cards).

  • RELEVANCY SCORE 2.63

    DB:2.63:[Event] - F1 2012 Fortnightly Hot Lap Challenge k3


    Hello everyone,

    Now the full F1 2012 game has been released, we thought we'd build on RenegadeXtreme's demo hot lap challenge and transfer it to the full game.

    It's quite simple, every two weeks the track will be set and you have to try and set the fastest lap. To enter, please post a picture of the lap time and we'll add you onto the leaderboard.

    This week:

    Yeongam – South Korea

    You have until Thursday the 25th to get your lap times in - you can have as many go's as you like

    Get those engines revving, check your KERS DRS are working and GO GO GO !!

    Latest Leaderboard: https://docs.google.com/spreadsheet/ccc?key=0AqQlILJdIFfIdGFKYzE4b09YcS1qRjd5WTI3dGh5YlE

    Oh and Congrats to DJ91rocks who won the Australia Hot Lap Challenge with a time of 1:22.795.




    @mattsimmo_ | Youtube: MrMattsimmo | PS3 Wallpapers

    DB:2.63:[Event] - F1 2012 Fortnightly Hot Lap Challenge k3


    Nice on Zamo

    Crikey, your PSN name reminded me of Zammo from Grange Hill all those years ago

    Right then, I've done my effort in F1 2011 to see how I got on. It won't count but I've stuck it on the leaderboard anyhow to compare.




    @mattsimmo_ | Youtube: MrMattsimmo | PS3 Wallpapers

  • RELEVANCY SCORE 2.63

    DB:2.63:Connect To A Database Using A Shell Script. xa


    Hello, I used to use the following script on an 8i database running on Solaris 8. I now have a 9i database on Solaris 9 and it does not seem to work any more. Any ideas?

    sqlplus -s /nologon _EOF
    connect dba_admin/dba_admin
    rem set echo on to display commands as they are executed.
    set echo on
    set term off
    set serveroutput on
    set timing on

    --Analyze Statistics
    PROMPT Analyzing DB_USER Schema ...
    EXECUTE DBMS_STATS.gather_schema_stats(ownname='DB_USER', degree=4, cascade=TRUE);

    sho errors;

    exit
    _EOF

    Thank you,

    David

    DB:2.63:Connect To A Database Using A Shell Script. xa

    This works. But in 8i I used to use the -s /nologon option and that works. Is this no longer supported in 9i. Does the nolog prevent the PS from showing the password? nologon does.

    David

  • RELEVANCY SCORE 2.63

    DB:2.63:Re: How To Use Regexp Or Regsub In Ombplus 10gr2 k1


    Is your regular expression designed and working expected elsewhere?

    The OWB 10gr2 release used an older Jacl 1.2.6 and for OWB 11g I think it is using Jacl 1.3.2, still not the latest and greatest.

    One thing you can do if you do hit problems with the tcl/jacl is drop down into java to use the String regular expression routines (see here ). With the replaceAll you should get what you need if there is a problem in the tcl libraries used.

    I have not tried it out on the older libraries but you can do stuff like
    set subject [java::new java.lang.String " release 123
    release 456"]
    set result [$s replaceAll (\y1-90-90-9) {Bevinding $}]

    Cheers
    David

    DB:2.63:Re: How To Use Regexp Or Regsub In Ombplus 10gr2 k1

    Hi,

    I've gotten a bit further here:

    I used regexp wrong, the next two samples are working tcl, alas neither one are working in owb.
    set subject " release 123
    release 456"

    set result2 [regexp -inline -all {\y[1-9][0-9][0-9]\y} $subject ]
    puts "result2 inline: $result2"produces in a normal tcl ide (i used komodo ide)
    result2 inline: 123 456Which is what i want , because i can use that list to create links from.
    However since the tcl package in OWB doesn't support the use of -inline or -all this doesn't work in OWB.

    This code:
    set result2 ""
    set result3 ""
    set test ""
    set subject " release 123
    release 456"

    while { $test != 0 } {
    set test [ regexp -indices {\y[1-9][0-9][0-9]\y} $subject result2 ]
    if { $test != 0 } {
    lappend result3 [string range $subject [lindex $result2 0] [lindex $result2 end]]
    set subject [string range $subject [expr [lindex $result2 end] +1] end]
    }
    }
    puts "result3 indices: $result3"generates this:
    result3 indices: 123 456Which is what i want , because i can use that list to create links from.
    However if i use this in OWB(OMBPlus client t.b.e.) it doesn't work.
    It has to do with word boundary's because this line:
    regexp -indices {\y[1-9][0-9][0-9]\y} $subject result2returns 0 while in Komodo IDe it returns 1, as it should.

    And indeed if i remove the \y bits, it will return 1, but then the match is not how i want it.
    Does anybody know a workaround and if this is fixed in some version of OWB ?

    Thx Mike

  • RELEVANCY SCORE 2.62

    DB:2.62:Comment Faire Pour Changer Les Questions De SéCurité sm


    hot to change de sucirity question when you want buy a song

  • RELEVANCY SCORE 2.62

    DB:2.62:Setting Microsoft Keyboard Shortcut For Metro Program 8j


    I have a Microsoft Natural Ergonomic Keyboard 4000 that allows 5 hot keys to be set to the programs of your choice. How do I set a hot key to open a program that runs on the new Windows 8 Metro interface? Can you? Specifically I want to open Metro Media
    Player but I cannot locate the executable file for it or any other metro programs to set the hot key. Metro Media Player is published by Klonworks and I find no program listings in any folder entitled Klonworks or Metro Media Player. The whole functionality
    of the metro interface is different but there must be an executable file somewhere that opens it with the tile on the Start Screen. How do I find it to make a hot key work?
    TIA
    J.

    DB:2.62:Setting Microsoft Keyboard Shortcut For Metro Program 8j

    My keyboard has keys that may be configured for any program, there are 5 of them. In order to configure the key one has to know the location of the executable file to set that for that key. See below:

    I cannot locate the executable file for any of the Windows 8 Metro programs to set a hot key to start the program. Where are the folders for the Windows 8 Metro programs found in Windows explorer?
    J.

  • RELEVANCY SCORE 2.61

    DB:2.61:Hot To Make The Text Wrap And Space p1



    Create a GUISkin and under the label section set what ever you like.


    Attach the Skin to your script and then use it.


    The code should look something like this:


    var myGUIStyle: GUISkin;


    function OnGUI(){


    GUI.Label( Rect(0,0, 200, 20), My Content, myGUIStyle.label); }

    DB:2.61:Hot To Make The Text Wrap And Space p1


    Create a GUISkin and under the label section set what ever you like.


    Attach the Skin to your script and then use it.


    The code should look something like this:


    var myGUIStyle: GUISkin;


    function OnGUI(){


    GUI.Label( Rect(0,0, 200, 20), My Content, myGUIStyle.label); }

  • RELEVANCY SCORE 2.61

    DB:2.61:Hot Swap..... Myth Or Fact ? cp



    I recently lost a hard drive and upgrade to Windows 7 which has native hot swap support.

    I set the bios to AHCI and put in a Trayless hard drive bay and thought ...Let the backup harddrive swapping fun begin.

    While the general view by most seems to be any SATA drive should work , the results are a mixed bag.

    All my drives are formatted with one Primary NTFS MBR-based partition table to allow backwards compatibility all the way back to dos.

    (Note by hot swap I mean , on attaching the drive by eSATA or SATA the drive is recognized and available to your PC not USB connectivity which I think is useless.)

    Two old Maxtor 300 gb 7L300SO are hot swappable

    Two Seagate Barracuda 500gb 700.12 are hotswapable

    One Western Digital Caviar Black 500gb not hot swappable

    One Seagate Barracuda lp 2TB not hot swappable.

    In two different external hard drive enclosures with esata I get the sane results as the internal bay.

    Firewire works for all drives in external enclosures except the 2TB drive witch is not supported by my firewire chip

    Western digital Support claim their drives don't support hot swap however many users claim they can hot swap Western digital drives and any other with no problem?

    What's going on?????????

    Has anyone used hot swap with Western Digital drives sucessfuly with eSATA in external box or SATA in a trayless drive bay??????

    If so which model worked and with what enclosure/dive bay did you use.

    OR is hot swap only avilable on some specific Segate dives and not on others????

    DB:2.61:Hot Swap..... Myth Or Fact ? cp


    Our drives are not hot swappable with eSATA.




    Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else.

  • RELEVANCY SCORE 2.60

    DB:2.60:What Are "Hot Topics"? zd



    Certain "regular" topics will, after a certain post, will become a "Hot topic" even though nothing much is happening at that particular topic. What are hot topics actually? What do they do? What causes a topic to become "hot"? Thank you for your answers.




    ICECHOMP 2IC OF THE ICE TRIBES"Boo Caw!" ~ Rawlin the Raven."My name, is Furtivo!" ~ Furtivo da Fox.

    DB:2.60:What Are "Hot Topics"? zd

    Cicada646 wrote:
    Hello everyone!

    Any topic with 25 or more posts in it is classified as a "Hot Topic".

    Happy posting

    Okay, thanks, I didn't know the number.




    ~l)~/\/~/-\~The tie between real life and legos is imagination .

  • RELEVANCY SCORE 2.60

    DB:2.60:Still No Way To Buy Extra Activations Under A Current Cloud Account... fj



    boo! my chat today...

    -----------

    second(s) or longer as there are 1 customer(s) in line ahead of you. You are now chatting with 'Vinayak' Vinayak: Hello! Welcome to Adobe Customer Service. Vinayak: Hi David. Vinayak: May I please have your email address registered with Adobe while I review your request? David Weisenbarger: prolinkup@gmail.com Vinayak: Thank you for email address. Vinayak: I understand that you need the extra license for the creative cloud subscription, am I correct? David Weisenbarger: yes Vinayak: Thank you for confirming. Vinayak: I will be glad to check and help you with this issue.

    David Weisenbarger: thanks Vinayak: May I have the order number of the subscription? David Weisenbarger: one second Vinayak: Sure. David Weisenbarger: DSSY********************

    Vinayak: Thank you for the order number. Vinayak: May I know on how many systems the product is working successfully right now? David Weisenbarger: I currently use it on one school notebook and one home pc successfully. I have a new third pc at my parents house I need to activate the software on now. Vinayak: According to the End User License Agreement (EULA) law, it is recommended to install the Adobe Software on only two computers and that is mentioned on the End User License Agreement when installing the Software provided the Software is not used simultaneously.

    Vinayak: However, you can install the Software on the third Computer by de-activating the Software from one of the older one and then install it on the new one so that you can avoid any error message while activating the Software.

    David Weisenbarger: I am aware. I am actually interested in paying extra for a third activation ability. David Weisenbarger: If not available, I will have to just buy another cloud subscription. David Weisenbarger: it would be better to have them all under my one account Vinayak: In this case you need to buy another subscription with the different adobe account as there is no option to buy two subscriptions in one account.

    David Weisenbarger: in that case, please put this in as a feature request to buy additional activations under a current cloud subscription. I am sure many people want/expect this.

    Vinayak: In this case I will provide you the link to contact the sales team over phone so that they will be glad to assist you in this regard.
    Vinayak: Please click here.
    Vinayak: Did you get the link?

    Vinayak: Please click on the sales tab to locate the sales number.
    David Weisenbarger: thank you

    DB:2.60:Still No Way To Buy Extra Activations Under A Current Cloud Account... fj


    Thank you for posting David. I think this may be possible with Creative Cloud Team once available but I created a feature request on your behalf here too:

    http://forums.adobe.com/ideas/2067

  • RELEVANCY SCORE 2.60

    DB:2.60:Re: Http1.1 Piplining 1z


    This is an application server (iAS) newsgroup. You'd have a better chance of getting a detailed answer in an iWS newsgroup.

    (iWS supports HTTP 1.1 out of the box. If you really had your heart set on testing it you could use use a proxy wedge to log all of the HTTP traffic. You might find some of the keepalive parameters you are looking for in the iWS Performance Tuning guide.)

    David

    DB:2.60:Re: Http1.1 Piplining 1z

    Hi,

    How to enable pipelining and persistent connections in iWS 4.1/6.0.

    Is there anyway to test this.

    Thanks in advance.
    rvenky

  • RELEVANCY SCORE 2.60

    DB:2.60:Hot Comments jc



    how do you send HOT comments to your friend page i can send comments but dont no how to send HOT'comments help!!

    DB:2.60:Hot Comments jc


    A great place to find Tagged approved comments is 123Tagged.com. Here you can find a ton of great comments to send your friends. Just copy the URL that is under the image and paste it in the comments field and post.

  • RELEVANCY SCORE 2.60

    DB:2.60:Single Account Reconciliation Within A Workflow mm


    Hi all,

    I need assistance, I'm trying to reconcile a single account within a workflow.
    I use the following code, but IDM performs a full reconciliation instead of to reconcile the specified account:

    --Action id='0'
    --expression
    --block
    --set name='reconView'
    --new class='com.waveset.object.GenericObject'/
    --/set
    --set
    --refreconView/ref
    --map
    --srequest/s
    --sACCOUNT/s
    --saccountId/s
    --refMyID/ref
    --/map
    --/set
    --invoke name='setId'
    --refreconView/ref
    --sReconcile:MyResource/s
    --/invoke
    --/block
    --/expression
    --/Action
    --Action id='1' application='com.waveset.session.WorkflowServices'
    --Argument name='op' value='checkinView'/
    --Argument name='view'
    --refreconView/ref
    --/Argument
    --/Action

    Anyone can please help me?
    Thanks you in advance, and best regards
    David.

    DB:2.60:Single Account Reconciliation Within A Workflow mm

    Hi,
    I tried to reconcile an account and tried reconcileView. I used your example but it is not working and it is throwing an error and the error is

    com.waveset.util.WavesetException: com.waveset.view.ReconcileViewer.createView unsupported.

    can you please give some information what am I missing.

    Thanks in advance.

  • RELEVANCY SCORE 2.59

    DB:2.59:On Your Mark, Get Set.... m8



    I've been steadily learning the command line, and much to my amazement, I'm actually enjoying it!

    However, I'm full of n00b questions. Here is an example of a firewall setup and qos. When using the "set firewall modify X rule Y modify mark 1000", is the number just any number you want, or is there a meaning to them, like 1000 means this and 2000 means that?

    set firewall modify david rule 10 destination address xxx.xxx.xxx.101-xxx.xxx.xxx.104
    set firewall modify david rule 10 modify
    set firewall modify david rule 10 modify mark 1000

    set firewall modify john rule 20 destination address xxx.xxx.xxx.99
    set firewall modify john rule 20 modify
    set firewall modify john rule 20 modify mark 2000

    set traffic-policy shaper shaper1 bandwidth 60mbit
    set traffic-policy shaper shaper1 default bandwidth 10mbit

    set traffic-policy shaper shaper1 class 2 bandwidth 15mbit
    set traffic-policy shaper shaper1 class 2 match client2 mark 1000

    set traffic-policy shaper shaper1 class 3 bandwidth 15mbit
    set traffic-policy shaper shaper1 class 3 match client5 mark 2000

    set interfaces ethernet eth0 traffic-policy out shaper1



    *Insert witty signature here*

    DB:2.59:On Your Mark, Get Set.... m8


    The numbers are arbitrary and can be set to your convenience. There are best practices that you can operate by at your choosing, but the "mark" number does not have any bearing on the traffic.

    However, the rule number of the firewall is important as it determines the order in which the rules are resolved.

  • RELEVANCY SCORE 2.59

    DB:2.59:Community Guru #21: Dstavert 9a



    David,

    Congratulations and thank you for your valuable contributions to the Community. You've really deserved it.

    Andr

    DB:2.59:Community Guru #21: Dstavert 9a

    Thank you all again. A really big thank you to William. It seems I am often posting links to the ghetto script repository. And also many posts to Andre's backup document.

  • RELEVANCY SCORE 2.59

    DB:2.59:Thread: Groupwise 7.0.2 Hot Patch 1a Windows Client 702hp1a 7z


    Puzzled !

    The client Hot Patch instructions seem simple enough except that they include the sentence:

    WARNING: DO NOT INSTALL THIS CLIENT UNTIL THE POA HAS BEEN UPDATED OR YOU WILL NOT BE ABLE TO LOGIN TO YOUR POST OFFICE.

    OK fair enough, but what do we use to patch the other agents ?

    http://www.novell.com/support/search...8655stateId=1

    There\'s a 2nd July 07 GWIA Post Hot Patch 1a Rev A.702HP mentioned on the above page

    And of course the 7.0.2 Post Hot Patch 1a Windows Client also mentioned

    but there don\'t seem to be any other relevant agent patches mentioned

    I have the raw April 2007 GW702 installed on our NetWare servers

    Any advice on what I need to patch would be much appreciated

    Splash

    DB:2.59:Thread: Groupwise 7.0.2 Hot Patch 1a Windows Client 702hp1a 7z

    Thanks for your comments everyone

    That\'s most informative

    I will install HP1a and then the GWIA post-HP1a

    and presumably then upgrade the clients

    Splash

  • RELEVANCY SCORE 2.59

    DB:2.59:Problem With Syntax Error dm


    I am trying to set up a scheduled backup for my contact management program.  According to their Knowledge base, I need to set up 2 files.
    The first is called SqlBackup.sql, and they say it should read:
     
    BACKUP DATABASE database name TO DISK = backup name WITH
    INIT
    Where database name is the name of your Maximizer SQL database and
    backup name is the filename and location of your backup.
    In my case, database name is Data.  For backup name  I created a folder on the desktop called Data.bak.  From that I made a file to read:
     
    BACKUP DATABASE Data TO DISK = C:\Data.bak WITH INIT
    When I run it under SQL Server Mgt Studio Express to try it out, I get
     
    Msg 102, Level 15, State 1, Line 1
    Incorrect syntax near 'C:'.
    Msg 319, Level 15, State 1, Line 1
    Incorrect syntax near the keyword 'with'. If this statement is a common table expression or an xmlnamespaces clause, the previous statement must be terminated with a semicolon.
     
    The 2nd file, called SqlBackup.bat, should read:
     
     
    Sqlcmd -S sql server name -U MASTER -P sql user password -i sql script
    name
    Where sql server name is the name of your SQL Server, sql user password is
    the password of the MASTER User, and sql script name is the name and path
    of the file you created in step 1.
     
    In my case, sql server mane is David-PC\Maximizer, the sql user password is blank in sql but there is one in Maximizer (although it doesn't work either with or without the password), andsql script name is located under C:\Users\David\Documents\SqlBackup.sql.  So the file reads:
     
    Sqlcmd -S DAVID-PC\MAXIMIZER -U MASTER -P -i C:\Users\David\Documents\SqlBackup.sql
     
    When I try that file, the error message is:
     
    Msg 102, Level 15, State 1, Line 1
    Incorrect syntax near 'S'.
     
    I do not unerstand Syntax.  According to the software co, this setup should work.  For some reason its not working for me.  Can you please help me?  Thank you.

    DB:2.59:Problem With Syntax Error dm

     
    I finally figured out my problem
     
    The Sqlbackup.sql file was running fine.  It backs up right to the Data backup file I created.
    The problem was the .bat file.  It turns out, I had 2 instances of Sqlbackup.bat on my pc.  One under C:\, and the other under C:\Users\David\Documents
    I have been making all the changes to the second file, not even realizing the first one was there.  The problem was, the scheduler kept pointing to the first file.  That file was setting up the Data.bak file in C:\, just as you said.  The second file works like a charm.
    I have rechecked all the settings, and everything is finally on track.  Thank you for your help.

  • RELEVANCY SCORE 2.59

    DB:2.59:Disney Cruise - What's Your Best Kept Secret Hot... 9p


    Will be traveling on the 7 day itinerary soon, please give me your best tips! What to bring? What kinds of food will they be serving? Are there contests I need to prepare for? etc, etc, etc. Thank you!!

    DB:2.59:Disney Cruise - What's Your Best Kept Secret Hot... 9p

    Hi, I am headed off to my 5th Disney Cruise next week. If you go to castawayclub.com you will find the menus for all sit down, quick service and room service menus. As well as examples of the Navigator, which is the daily informational sheet, which will be placed in your cabin each night for the following day. And all sorts of other useful info. You can also find tons of useful info at disboards.com, under the cruise area.
    Bon Voyage!
    Stacey

  • RELEVANCY SCORE 2.58

    DB:2.58:Can Not Download The 7.6.1-025 Hot Patch s1



    Hello,

    We have several C370's that are running 7.6.1-022. I have tried to download the latest patches, Hot Patch 1 and Hot Patch 2. When I do, I receive the error message that there are no available upgrades.

    Does anyone have any insight as to why I am receiving this error?

    Thank-you,

    Robert Warner                  

    DB:2.58:Can Not Download The 7.6.1-025 Hot Patch s1


    Hello,

    We have several C370's that are running 7.6.1-022. I have tried to download the latest patches, Hot Patch 1 and Hot Patch 2. When I do, I receive the error message that there are no available upgrades.

    Does anyone have any insight as to why I am receiving this error?

    Thank-you,

    Robert Warner                  

  • RELEVANCY SCORE 2.58

    DB:2.58:Weblogic Gc (How To Set It) xa


    Hi:

    How do I set Weblogic to controll garbage collection ?

    Thank You
    David L. Wasler
    dwasler@yahoo.com

    DB:2.58:Weblogic Gc (How To Set It) xa

    It's not clear to me what you are talking about here. Old versions of
    WLS used to have an option where the server would attempt to call
    System.gc as free memory dropped. This is a very bad idea on any modern
    jvm. It has not been in the product for many versions.

    -- Rob

    "David L. Wasler" wrote:

    Hi:

    How do I set Weblogic to controll garbage collection ?

    Thank You
    David L. Wasler
    dwasler@yahoo.com

  • RELEVANCY SCORE 2.58

    DB:2.58:Thread: Re: Failed Login Log xj


    Hi,

    we have the same problem. It appears only if some user opens NetStorage

    and tries to open iFolders folder on the left side of the NetStorage\'s

    web page. The message about iFolder Passphrase for user user_name

    appearse. So, it seems, that if this passphrase is not set, authentication

    failure for this user appears. Authentication failure message also appears

    in the Apache 2.x for NetWare console screen.

    So are your users using NetStorage?

    Thomas

    On Wed, 01 Sep 2004 00:38:03 GMT, Andrew C Taubman

    ataubmanILoveSpam@novell.AndSpamLovesMe.com wrote:

    You could be right, I\'m not that familiar with iFolder, and David\'s post

    confirms your thinking here. But if iFolder is working I don\'t

    understand how there\'d be failed login attempts from it ...

    Didn\'t make any sense to us, either. iFolder\'s install makes itself a user

    object (iFolder_ServerAgent). This user has a password (calculated, or secret

    known only to the iFolder team or something, since it\'s not under our

    control).

    When you start iFolder, it logs in (ok), but also starts incrementing NoRM\'s

    failed logins statistic.

    We\'ve got a query in to see why this is, mostly just out of curiousity. I\'ve

    never found that particular statistic to be all that interesting or

    useful and

    generally just ignore it.

    -' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-

    David Gersic dgersic_@_niu.edu

    I\'m tired of receiving rubbish in my mailbox, so the E-mail address is

    munged to foil the junkmail bots. Humans will figure it out on their own.

    DB:2.58:Thread: Re: Failed Login Log xj

    The post you are replying to is 18 months old, and it\'s unlikely David

    will see your question.

    -' + '-

    Andrew C Taubman

    Novell Support Forums Volunteer SysOp

    http://support.novell.com/forums

    (Sorry, support is not provided via e-mail)

    Opinions expressed above are not

    necessarily those of Novell Inc.

  • RELEVANCY SCORE 2.58

    DB:2.58:What Is Your Favorite Video Game(S)? sp



    What is you favorite game? I have five, Sins of a solar empire (PC), The lord of the rings battle for middle earth 2(PC), Super smash bros. brawl (Wii), Metroid prime (Gamecube), and LEGO lord of the rings (Wii)!




    The dark Dragon: HYDREIGON The following TOTALLY applies to me. "I'm too hot. Call the police and the firemen, I'm too hot. I make a Dragon wanna retire, man. I'm too hot." -Bruno Mars

    DB:2.58:What Is Your Favorite Video Game(S)? sp


    Well i'm a Spider-man and a Sonic fan. I only have 1 Sonic game which is the mega collection plus for the ps2. Im coming for you Knuckles In Sonic 2! (It is actually in the game as a unlockable) My favorite Spider-man game is Ultimate Spiderman. I like the story and that you get to play Venom throughout half of the game! I also like the gameplay of both.




    Everything is better with a spontaneously combust button.

  • RELEVANCY SCORE 2.57

    DB:2.57:? For David E 9j


    Hi David

    I posted a ? which has not been answered have been looking at solutions for other folks with somewhat similar problems...in this case, David Dean's.

    In David D's you suggested "First: Go to your iPhoto library folder in the Finder and Get Info (Cmd-I). In the Ownership and Permissions, expand the Details section. Make sure you are the owner, and set the access to Read and Write. Then click "Apply to enclosed items" and authenticate. This should address any permissions problem throughout your library. If this fixes your problem, you don't need step two."

    I went into the Ownership, etc. but am unable to find any option "Apply to enclosed items authenticate". Can you help me find this?

    It lists Owner, Access, Group, Access Others. Under both accesses Others, it lists Read write, Read only no access.

    Under Owner (me) Group (admin).

    So, I'm stumped!

    Hope you can help, thanks,
    Pat

    DB:2.57:? For David E 9j

    Pat,

    I'm happy you could recover your lost pics. The Untitled CD folder seems to be a folder that is saved when you burn a CD - I think there is an option to save the burn folder at some point when you burn a CD, and you may have done that.

    If you've imported the pictures into the iPhoto library (and in Advanced prefs you have opted to actually copy pictures into the iPhoto library) then those folders in the Pictures folder are now duplicates. However, before you trash them take the opportunity to burn them to a CD and back them up, just in case.

    The new organization is fairly useful, especially because the Originals folder is a one-stop shop for all your originals. I don't mind doing the editing over again as long as I have my "negatives" in the Originals folder. Importing that folder preserves rolls and keywords - I had to consolidate libraries to this iMac and the easiest way to do that was to bring the library from the older machine, update it for iPhoto 6, open my current library, and simply import the whole Originals folder from the old library. I wish iPhoto could integrate two libraries. Maybe in iLife 07. I keep wishing...

  • RELEVANCY SCORE 2.57

    DB:2.57:Wire Hot Spot dz



    Does it cost to use your droid as a hot spot?

    DB:2.57:Wire Hot Spot dz

    stevedw wrote:
    Does it cost to use your droid as a hot spot?

    yes, its $20 a month for 2gb of data iirc

  • RELEVANCY SCORE 2.57

    DB:2.57:Supervisor Redundancy zs



    I have a 6513 with two sup 720's and wanted to know what the difference is between STANDBY COLD and STANDBY HOT. I'm assuming that STANDBY HOT is the prefered method for a failover??  How do you change the state from cold to hot??

    DB:2.57:Supervisor Redundancy zs


    Hi,

    In Catalyst 6500 Series Switches allow a redundant Supervisor Engine to take over if the primary Supervisor Engine fails in order to support fault resistance. Redundant Supervisor Engines must be of the same type with the same model feature card to support redundancy. When you install two Supervisor Engines, the first one to come online becomes the active module. The second Supervisor Engine goes into standby mode.

    Redundant Supervisor Engines are hot swappable. The system continues to operate with the same configuration after it switches over to the redundant Supervisor Engine.

    Redundancy is always enabled and cannot be disabled. Redundancy is enabled anytime the switch has two Supervisor Engines installed on it and the switch decides which specific redundancy mode to use in accordance to the type of images it has.

    Check out the below link hope this clears your query !!

    http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a0080a98f3c.shtml

    Regards

    Ganesh.H

  • RELEVANCY SCORE 2.57

    DB:2.57:December 17 - Great Veterinary Technician Webinar - David Liss, Penn Foster Class Of 2012! :-) 9a



    Hi, Gang!

    I am excited to promote this GREAT Veterinary Technician Webinar coming up on December 17th from 8pm-10pm EST. Our special Guest Speaker will be David Liss, a PENN FOSTER graduate in the Class of 2012! David has done amazzzzzzzzzzzzzing things with his life and his career, both before, during and after his journey through our awesome Program. Come to the Webinar and be inspired to do GREAT things in your life and career as a PENN FOSTER Veterinary Technician. David's story of dreams, struggles, and victories will inspire you and show you that YOU CAN DO whatever you set your mind to. We are proud of David and his accomplishments! Hope you to "see" you there! Information is below, and registration can be done through your My Courses page!

  • RELEVANCY SCORE 2.56

    DB:2.56:Re: 79


    Typo on my part...

    PARTITION would be the default... (I usually use WALLS - and that's
    what I was thinking).

    On Fri, 27 Aug 1999 09:54:22 -0700, David
    wrote:

    Matt,

    I'm trying to follow your tutorial. When you set the root default to
    partition it shows up in the Layer manager as A-PARTITION, not A-WALLS.

    Is the Root default correct to be set to PARTITION?

    David Behrens

    Matt Dillon
    ___________________________________________
    Member:
    Autodesk Discussion Forum Moderator Program
    ___________________________________________

    The D.C. CADD Company, Inc.
    http://www.dccadd.com

    DB:2.56:Re: 79

    A routine that would allow just using the Layer Standards in ADT2 would be
    great. Right now I would have to maintain the layers in ADT2 and also a
    separate list in a lisp routine in order to force users to our office
    standards.

    --

    Mark A. Carter
    CAD Manager
    NJRA Architects
    www.njraarchitects.com

  • RELEVANCY SCORE 2.56

    DB:2.56:Is There An Updated Windows Vista Driver For Tungsten T2 Product k9



    Hi all,

    I have recently purchased a new computer with Vista O/S. I need to perform Hot Sync operation. I have downloaded and installed the Vista capable driver but was unable to find the driver for the Hot Sync H/W. Would you please let me know if an updated driver for the old cradle exists?

    Thank you in advance for your support,

    Ziggy

    Post relates to: Tungsten T2

    DB:2.56:Is There An Updated Windows Vista Driver For Tungsten T2 Product k9


    Thanks WyreNut. I appreciate your response very much.

    Take care,

    ZiggyMan

    Post relates to: Tungsten T2

  • RELEVANCY SCORE 2.56

    DB:2.56:Palm Vx - If You Changed Computers Since Your Hot Synch Do You Still Need Your Password To Hot Synch Again? ad






    Post relates to: Palm Vx

  • RELEVANCY SCORE 2.56

    DB:2.56:Ht204053 Storing Documents From My Imac On Icloud zm


    I am using M/S Office for MAC 2011. My iMac O/S is 10.8.3.1) Can I back up my documents on icloud in case my iMac dies? 2) How do I back up the documents to my icloud account?Thank you for your assistance.Best,David

    DB:2.56:Ht204053 Storing Documents From My Imac On Icloud zm

    Thank you for the information. This answered my question. On to plan B....buy a back-up drive.

  • RELEVANCY SCORE 2.56

    DB:2.56:Can I Block Spam Using Spamhaus? z3


    A company called 'Spamhaus' was in the news. I went to their website (http://www.spamhaus.org/)and they said you can easily block spam for free by:

    ..simply set your mail server's DNSBL check to query sbl-xbl.spamhaus.org only

    What does that mean? Can an ordinary .mac user do that?

    Thanks,

    David

    DB:2.56:Can I Block Spam Using Spamhaus? z3

    Dave,

    if you want to use the spamhaus blacklist in your client, you could use JunkMatcher - it allows the use of up to three blacklists for spam identification and nicely works together with Mail's own junk filter:

    http://junkmatcher.sourceforge.net

    Andreas

  • RELEVANCY SCORE 2.56

    DB:2.56:Ozgt Is Looking For You 9p



    gday im the creator/admin over at OZGT we are currently looking for new members to fill the 16 player lobbys.

    we have already finished a muscle car series and moving onto more, we currently have our sites set on these racing setups.

    -Euro V8's

    -Reasonably Priced Car around TopGear test track (started just need to put your name down for a go)

    -hot lap comps

    we also let you throw some ideas up and we usually go with them

    anyways most of us that are on here are from OZFM aussie forza motorsport

    have a browse here http://ozgt.forumotion.com/if you like what u see throw a post up in introducing yourself and send some Friend Requsts out and you will be racing, cruising etc before you know it

    have a good one...... cheers

    DB:2.56:Ozgt Is Looking For You 9p


    gday im the creator/admin over at OZGT we are currently looking for new members to fill the 16 player lobbys.

    we have already finished a muscle car series and moving onto more, we currently have our sites set on these racing setups.

    -Euro V8's

    -Reasonably Priced Car around TopGear test track (started just need to put your name down for a go)

    -hot lap comps

    we also let you throw some ideas up and we usually go with them

    anyways most of us that are on here are from OZFM aussie forza motorsport

    have a browse here http://ozgt.forumotion.com/if you like what u see throw a post up in introducing yourself and send some Friend Requsts out and you will be racing, cruising etc before you know it

    have a good one...... cheers

  • RELEVANCY SCORE 2.56

    DB:2.56:When The... 7x


    PS3 fan goes wild when your playing, i take it that means its a bit too hot?

    David

    DB:2.56:When The... 7x

    It's doing its job. Keeping the inside cool and pushing the hot air out.

  • RELEVANCY SCORE 2.55

    DB:2.55:Qtss And Ad k1


    Hi,

    Has anymore been able to set up QTSS to authenticate a stream against an AD user accounts? Please post your solution if you have.

    Message was edited by: David Marcinkowski

    DB:2.55:Qtss And Ad k1

    Hi,

    Has anymore been able to set up QTSS to authenticate a stream against an AD user accounts? Please post your solution if you have.

    Message was edited by: David Marcinkowski

  • RELEVANCY SCORE 2.55

    DB:2.55:Re: Question For David Koch 9f


    David:

    I notice from your posts that while you have been using ADT / ACA 2004 -
    2009 at home, the company you work for is still on ADT 2004 and has not kept
    moving forward. Why are they not keeping up? ADT 2004 is no longer even
    being supported. Do they not realize how far behind they are? What reasons
    have they given for not staying current? Is it budgeting? Training costs?
    Too much In-HouseCustomization? Do they not realize the time-saving
    enhancements that have been released since 2004? Or are they only using a
    limited set of tools and AutoCADing the rest? Just why have they not
    implemented any of the Releases since 2004? Your comments would be
    appreciated as I need some advice to keep us upgrading with each and every
    release.

    Thanks in advance.

    DK

    DB:2.55:Re: Question For David Koch 9f

    all valid points and comments. My point was on a small project layout tabs
    and snapshots accomplish the same thing and in a template file all the set
    up is already done, elevations take a second to generate and automatically
    hide all. The biggest hindering point is the trades simply don't use adt or
    aca or project management or even know what it is. If all is done in house,
    what a blessing. I deal with an engineer still using r-12 most everyone else
    is still at 2000

    "D.K." wrote in message
    news:5852087@discussion.autodesk.com...
    The benefit in using Constructs even in a small project are immeasurable.
    Here's how and why:

    1. Small One Story Building: Have a Construct for the Exterior "Shell"
    with the roof in this file as well.

    2. Have a separate Construct for all the Interior "guts" of the building.

    3. Xref Overlay these two together to "see" the relationships between
    outside and in when drawing in the constructs. Use Project
    Navigator to do this and just drag-and-drop files one into another.

    4. The two constructs will "merge" together in Views to form the
    different types of Plans you need (Floor Plan, Reflected Ceiling, Roof Plan,
    etc....)

    What are the benefits in this method?

    1. You use just the Exterior "Shell" to generate your Exterior
    Elevations. Without the Interior "guts" elevations are created quicker and
    do not have to "hide" everything behind the exterior walls.

    2. With experience and a little Display Rep. tweaking you can create a
    Roof Plan "View" where the exterior walls are displayed as a single dashed
    line and the roof is displayed. Again with the interior "guts" in a
    separate file these objects do not get in the way of this plan type so you
    don't have to mess with freezing layers etc....

    Why use ACA "all the way?" We all paid almost $4k for the program so is it
    not a waste of $$$ not squeeze every last drop from it?

    But it takes longer to create a building using the ACA method! Wrong--Dead
    Wrong! Using ACA Objects the way they were intended actually speeds drawing
    creation. How? Because you put an object in one time and that object
    generates both Plan and Section and Elevation Views. Change the Object and
    all other views when updated change too.

    To prove this for yourself try one simple test: Download the Toilet
    partitions I posted in the thread "Need Interior Elevation Help--Please."
    This was a facetious post with the intent of getting people to "think." The
    files are in my last post in the thread.

    Put them in a drawing and generate an interior elevation. Was that faster
    then drawing them in Plan and then creating the elevations using linework.
    Change them and update the elevation. Faster or Slower?

    When people say it takes longer they speak out of ignorance. The key to ACA
    is something we all need to keep doing all our life--take in knowledge! I
    know architects that will pay to go to a boxed lunch AIA meeting so as to
    get their CEU's and see a Power Point presentation that really is just a
    sales pitch by a manufacturer but that same architect will not invest for
    free in the tools of his trade.

    Interestingly there is a side effect to all of this that will make everyone
    here a lot happier. It is for this very reason that AutoCAD and ACA will
    never be discontinued by Autodesk. It is because with the average user
    knowing 20 or less commands they will never be ready for anything else.

    The other power of ACA is the Library of styles--build it up, customize it
    and use it.

    Invest in yourself and learn.

    DK

    wrote in message news:5851549@discussion.autodesk.com...
    " few firms..." i work at a firm that is on LT. I use acad and arch in
    another office and find that it is very useful and much prefer this to LT.
    At the LT office we have folks who never learned anything but 2d drafting
    and lines. They tried to go use adt 2004 but this was met with much
    resistance.

    i have a question about Autocad Architecture 2008 - why and to what
    benefit is breaking a building apart into constructs a good thing? i like
    pretty much all of what I see but have not yet found a project where
    breaking up the bldg such as the ext walls beyond layers is useful.
    perhaps the answer is that the projects just aren't large enough.

    I am searching for reasons to stick it out and try to use ACA "FULLY"

  • RELEVANCY SCORE 2.55

    DB:2.55:Become A Hot Lap Judge For The Week Ii 1m



    Howdy Nation!,

    We want to put your tracks submitted for Hot Lap though the ultimate proving grounds... the opinions of your peers!

    That’s right, An upcoming week of Hot Lap Tracks will be selected by the MNR community (with our “guidance”) for the following week’s Hot Lap Tracks seating.

    If you are interested in becoming a Hot Lap judge for a week sign up here...

    1.

    2.

    3.

    4.

    5.

    6.

    7.

    8.

    9.

    10.

    More details to come...

    Mark

    DB:2.55:Become A Hot Lap Judge For The Week Ii 1m


    1. blackjet2000

    2. salome-yst

    3. xginox13

    4. John31269

    5. JNM-CIM

    6. MabsterB

    7.panpa00

    8.

    9.

    10.

    

    im back




  • RELEVANCY SCORE 2.55

    DB:2.55:Need For Speed Hot Pursuit Challenge a9



    Ive just set what i think are pretty quick times on the need for speed demo from PSN.

    if you would like to challenge them leave a post and send me an invite.

    ill give you 48 hours to beat them.




    Get your Portable ID!

  • RELEVANCY SCORE 2.55

    DB:2.55:My Msi Ge60 Gets Way Too Hot. md




    Hello Guys!

    I bought a MSI GE60 some weeks ago. Everything works well except that the keyboard gets very hot when I play CounterStrike: Global Offensive, for exaple. In that game you need to use the A,W,S,D keys but they are getting very hot while Im playing which really annoys me.

    Do you guys have any clue how to like cool down the fan? Or do you have another solution to solve this problem? The thing is that I use the turbo-fan (I press the button) when I start playing but that doesnt help at all. Turning it off doesnt help either so.... What do you think?

    Very happy for your answers, if this problem is related to another thread in this forum please let me know since I really wanna solve this problem.

    Thanks

    DB:2.55:My Msi Ge60 Gets Way Too Hot. md


    Repaste CPU/GPU. That will knock a few degrees off if youve currently got the paste job they did at the factory/you do it properly use good quality paste (doesnt have to be uber expensive)

  • RELEVANCY SCORE 2.55

    DB:2.55:Does Setting Up A Personal Hot Spot Allow Other People To Use Up Your Cellular Data md


    by setting up your own personal hot spot does it allow other people to use up you cellular data?

    DB:2.55:Does Setting Up A Personal Hot Spot Allow Other People To Use Up Your Cellular Data md

    Basically yes. Personal Hotspot means you are sharing out your Cellular Data connection.If you give the Hotspot password to someone they will use your Cellular data to access the internet.

  • RELEVANCY SCORE 2.55

    DB:2.55:Normal Temperatures For Imac 27" k8


    My iMac 27" quad-core i5 seems hot. I'm using Temperature Monitorhttp://www.bresink.de/osx/0TemperatureMonitor/download.php5What temperature range(s) are normal for this computer?Thank you for your help. - nello

    DB:2.55:Normal Temperatures For Imac 27" k8

    TM = Temperature Monitor in this context. In others, TM = Time Machine.

  • RELEVANCY SCORE 2.55

    DB:2.55:How Hot Is 2 Hot... Apple Clues In cx


    Lots of people are asking how hot is too hot. Here's a quote to be found on this site that can be of some practical use:

    Hot Tip
    If you use your iPod or notebook in temperatures higher than its specified operating range, 95F (or 35C), you may permanently damage your batterys capacity. I.e., your battery wont power your device as long on any given charge. You may damage it even more if you charge the device in these temperatures. Even storing a battery in a hot environment can damage it irreversibly.

    I found it when looking up how to maintain the MBP's (or any other) Li-ion Battery. If I understand correctly, a lot of you show tmperatures that are significantly higher around that area, right? Somewhere in the mid 40's C around the memory is what I've seen.

    Maybe this could be a small step in determining the how hot is too hot question that seems to bubble up here quite often.

    Yaniv

    MBP 2.16 1GB 7200RPM Mac OS X (10.4.6)

    DB:2.55:How Hot Is 2 Hot... Apple Clues In cx

    i can't see why this would make a difference? for example, i would assume the ambient temp around the battery would exceed 35C when placed on a desk (as recommended) and the bottom of MBP cooking at 40C+ temperatures. from what's written, it would seem less then ideal.

    Yaniv

    MBP 2.16 1GB 7200RPM Mac OS X (10.4.6)

  • RELEVANCY SCORE 2.55

    DB:2.55:Printer 2620 All In One 3p



    First time using this site - thank you.

    Only problem I can't find an answer to is how to set the correct time and date on my backlite - to print when I send a fax.

    Thank for your help,

    David

    DB:2.55:Printer 2620 All In One 3p


    A big THANK YOU - APPRECIATE YOUR HELP!

  • RELEVANCY SCORE 2.55

    DB:2.55:Going Back To 2.0? a9


    Does anyone know hot I can go back to 2.0 from 2.0.1?

    I cannot seem to figure this out!

    David

    DB:2.55:Going Back To 2.0? a9

    I would also like to go back to 2.0
    Mine 'eventually' updated after several attempts, but now the camera wont work.
    I click on the button and the software opens up, but the shutter graphic wont open and just drops back to the home page.
    Its the same when i try to go into the photos file too.
    It also did it when i went into 'settings, general, about', but that appears to be working now.
    I have been trying to get this to work for 4 hours, and i leave for work in an hour, so looks like i wont have my phone with me.

  • RELEVANCY SCORE 2.54

    DB:2.54:Some General Questions About An M5 Bridge f8


    I have a test set up you can see in this posthttp://forum.ubnt.com/showthread.php?t=689141. Will the configuration I have shown above pass ALL ports like the ones needed for AirControl?2. Bean_Planter mentioned that the signal strength on my set up was "too hot". Really? I always thought more=better. What are the symptoms on an M5 if it is over driven? What "should" the dBm be to achieve the full bandwidth of "Breakthrough speed 150+ Mbps real TCP/IP throughput" as advertised.3. With the current set up, the M5's can't ping each other. I think this is causing the tools-speed test to fail. It just times out "Error: Request timed out - remote IP is not accessible". What have I set wrong?Thank you all for your helpKeshka

    DB:2.54:Some General Questions About An M5 Bridge f8

    Please post your final settings; don't askus to pour through all those old posts. If you're doing testing with no antennas,it's a very poor idea to leave rf outputset at maximum; it should be at minimum.And without antennas, throughput maybe very poor and asymmetric. Dave



    HQ in Seacoast region New Hampshire U.S.A. Ubiquiti Certified Trainer [UCT] for: UBWA [AirMax] / UEWA [UniFi] / UBRSS [EdgeOS (routers)]

  • RELEVANCY SCORE 2.54

    DB:2.54:Latitude C400 Runs Very Hot ?? dj



    I have a feeling this is a comon problem , but my Lat.C400 runs really hot . So hot you can't work with it on your lap. Even on AC the fan very seldom comes on if at all. Anybody know a fix to this issue ? Is it possible to set up the fan thermostatto come on at a lower temp?

    g
    Message Edited by stp on 06-03-2005 04:11 PM

    DB:2.54:Latitude C400 Runs Very Hot ?? dj

    stp wrote:

    please explain to me why the fan dosen't come on when the unit is above a certian temperature.

    Have you tried referring to your User Guide and running the Dell Diags, to see if the fan is even functional? (Note: The "technical knowledge" portion of your User Guide suggests this as an initial troubleshooting step, any time you suspect a hardware malfunction.)

    If the fan and/or thermal trip point portions of the Diags fail, that's probably going to answer your question, and is about the only way you're going to get it answered properly. If these elements are working properly, they're designed so that the fan will activate when the thermal sensor reaches a preset upper point, and deactivate when the temperature has decreased below that point.

    As for the semantics of "laptop vs notebook," that subject has been discussed ad infinitum within this forum, and should not even have to have been repeated here, as even a cursory search of this particular conference would reveal. The fact of the matter is that they're not necessarilyengineered to be used in laps any more, and this certainly isn't any secret to anyone who takes the time to educate him/herself on the subject.

    From the C400 User Guide:

    "When to Use the Dell Diagnostics

    Whenever a major component or device in your computer does not function properly, you may have a component failure. If you are experiencing a problem with your computer, Dell recommends that you perform the checks in "Solving Problems"and run the Dell Diagnostics before you call Dell for technical assistance."

  • RELEVANCY SCORE 2.54

    DB:2.54:Pe2300 Raid Controller 8j



    Hello,

    I have a PE 2300 system with S/Tag: PZRMQ.

    I know it has the 6 hard drive capacity but what I don't know is if it of the 2 x3 disk non-hot swap variet of 1 x 6 disk hot-sqap.

    Is there a really easy way to tell.

    Regards

    David

    DB:2.54:Pe2300 Raid Controller 8j

    Hi David,

    Your system did ship with the 1x6 SCSI Backplane. You can tell the difference between this and the 2x3 backplane by looking at the SCSI connections. The 1x6 will have 1 connection, the 2x3 will have 2 connections.

    Thanks for using the Dell Community Forums!

  • RELEVANCY SCORE 2.54

    DB:2.54:Comedy xp



    Out of interest of improving the supoprt process, I thought the following HP support exchange - via chat - may be of interest

    [Thursday, March 29, 2012 4:15 PM] -- Automatically generated message:

    Thank you for using HP's Instant Active Chat Support. Your request has been received by our Technical Support Center, and has been queued. Support for HP Notebooks, Desktops, and Printers are available 24 hours a day, 7 days a week. You will receive a response to your support request in 2 minutes or less.

    [Thursday, March 29, 2012 4:16 PM] -- Automatically generated message:

    The HP Support technician, Vinay R has been assigned to your case.

    [Thursday, March 29, 2012 4:16 PM] -- Automatically generated message:

    For reference, your Case ID is 4639040905

    [Thursday, March 29, 2012 4:16 PM] -- Vinay R says:

    Hello David, thank you for contacting HP Active Chat Support. My name is Vinay R and I see you have a question regarding your Notebook. Please give me 2 min to review your information. Thank you.

    [Thursday, March 29, 2012 4:17 PM] -- David Frith says:

    Hi, not a notebook. I just grabbed any serial number I could so I could get into the support website

    [Thursday, March 29, 2012 4:17 PM] -- Vinay R says:

    Good evening David, how are you doing today?

    [Thursday, March 29, 2012 4:17 PM] -- David Frith says:

    WE need the DLL's specified in the following HP article

    [Thursday, March 29, 2012 4:17 PM] -- David Frith says:

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?objectID=c01682861dimid=1001553288di​...

    [Thursday, March 29, 2012 4:18 PM] -- David Frith says:

    Hi, good thanks... I'm assuming I;ve found a human now

    [Thursday, March 29, 2012 4:18 PM] -- Vinay R says:

    Glad to hear about you.

    [Thursday, March 29, 2012 4:19 PM] -- Vinay R says:

    David i understand that you have an issue with Laser jet printer, am i correct?

    [Thursday, March 29, 2012 4:20 PM] -- David Frith says:

    Yes, sort of. We have the exact issue documented in the link

    [Thursday, March 29, 2012 4:20 PM] -- David Frith says:

    I work at a large public hospital, it has many printers

    [Thursday, March 29, 2012 4:20 PM] -- David Frith says:

    The HP bi-direction drivers are crashing the print spooler on the terminal servers

    [Thursday, March 29, 2012 4:21 PM] -- David Frith says:

    I need these files

    [Thursday, March 29, 2012 4:21 PM] -- David Frith says:

    •32-Bit: hpzbdi.dll (1.1.2.51)

    •64-Bit: hpzbdi.dll (1.2.2.51)

    [Thursday, March 29, 2012 4:21 PM] -- Vinay R says:

    Alright David you have contacted the desktop chat support team, please be online while i route this chat to printer support team.

    [Thursday, March 29, 2012 4:23 PM] -- David Frith says:

    thanks

    [Thursday, March 29, 2012 4:25 PM] -- Vinay R says:

    David could you please provide the serial number of laser jet printer.

    [Thursday, March 29, 2012 4:25 PM] -- David Frith says:

    Hi, they are not near me

    [Thursday, March 29, 2012 4:25 PM] -- David Frith says:

    This is a hospital

    [Thursday, March 29, 2012 4:25 PM] -- David Frith says:

    it has 50 printers

    [Thursday, March 29, 2012 4:25 PM] -- David Frith says:

    from varying makes

    [Thursday, March 29, 2012 4:26 PM] -- Vinay R says:

    Hello David, thank you for contacting HP and for your interest in our Active Chat support program. My name is Vinay R and I see you have a question regarding your 4639040905. Unfortunately, your support request has been routed incorrectly. I will forward this session and all of its contents to the appropriate support group at this time.

    [Thursday, March 29, 2012 4:26 PM] -- Automatically generated message:

    An HP Chat Support Engineer (Rajesh) has been assigned to your case 22276475.

    [Thursday, March 29, 2012 4:27 PM] -- Rajesh Y says:

    Hello David, thank you for contacting Hewlett-Packard and for your interest in this HP Active Chat support. I would be assisting you further. Please give me 3 min to review the history of this conversation. Thank you.

    [Thursday, March 29, 2012 4:27 PM] -- Rajesh Y says:

    Please let me know the serial and product number of printer.

    [Thursday, March 29, 2012 4:28 PM] -- David Frith says:

    Hi, as noted, this is a hospital. The printers are not near me.

    [Thursday, March 29, 2012 4:28 PM] -- David Frith says:

    do I really have to go up in a lift, to a care floor, to find a HP printer.. to get it;s serial number ?

    [Thursday, March 29, 2012 4:28 PM] -- David Frith says:

    the priner is not the problem

    [Thursday, March 29, 2012 4:28 PM] -- David Frith says:

    the drivers are

    [Thursday, March 29, 2012 4:29 PM] -- David Frith says:

    as per the link, please read the HP article

    [Thursday, March 29, 2012 4:29 PM] -- Rajesh Y says:

    Yes, serial and product number of printer is required so that we could assist you further.

    [Thursday, March 29, 2012 4:30 PM] -- David Frith says:

    have you read the article ?

    [Thursday, March 29, 2012 4:31 PM] -- Rajesh Y says:

    David, first of all I need to share with you that if there is any issue with spooler then we would be unabel to assist you as the spooler is the service of Operating system and not of printer driver.

    [Thursday, March 29, 2012 4:35 PM] -- David Frith says:

    from the HP article;

    [Thursday, March 29, 2012 4:35 PM] -- David Frith says:

    It has been reported that HP Bidirectional Channel components (hpzbdi32.msi /hpzbdi.dll or hpzbdi64.msi / hpzbdi.dll ) could be the potential cause of various performance related issues within stand-alone print servers, Windows Cluster Server, Citrix, and/or Terminal Server environments resulting in 10 minute delays during driver installation, intermittent print spooler crashes, performance issues, CPU spikes

    [Thursday, March 29, 2012 4:36 PM] -- David Frith says:

    I have a serial number

    [Thursday, March 29, 2012 4:36 PM] -- David Frith says:

    SGCX320500

    [Thursday, March 29, 2012 4:37 PM] -- Rajesh Y says:

    The serial number of printer is not correct.

    [Thursday, March 29, 2012 4:37 PM] -- David Frith says:

    that is from the configuration print out

    [Thursday, March 29, 2012 4:38 PM] -- David Frith says:

    product name: hp laserjet 4200

    [Thursday, March 29, 2012 4:38 PM] -- David Frith says:

    printer name :hp laserjet 4200

    [Thursday, March 29, 2012 4:38 PM] -- Rajesh Y says:

    Please check the product number of printer as well.

    [Thursday, March 29, 2012 4:38 PM] -- David Frith says:

    printer number 7

    [Thursday, March 29, 2012 4:38 PM] -- David Frith says:

    printer serial number SGCX320500

    [Thursday, March 29, 2012 4:39 PM] -- David Frith says:

    formatter number a40dsbq

    [Thursday, March 29, 2012 4:39 PM] -- David Frith says:

    firmware datacode 20030213 04.007.3

    [Thursday, March 29, 2012 4:39 PM] -- David Frith says:

    serive id 57942

    [Thursday, March 29, 2012 4:40 PM] -- Rajesh Y says:

    I would like to know the product number of printer as well.

    [Thursday, March 29, 2012 4:42 PM] -- David Frith says:

    there is no product number on the config printout

    [Thursday, March 29, 2012 4:42 PM] -- Rajesh Y says:

    Please check it on printer.

    [Thursday, March 29, 2012 4:44 PM] -- David Frith says:

    having to open thje printer to find it... Q2426A

    [Thursday, March 29, 2012 4:45 PM] -- Rajesh Y says:

    Thank you for the information.

    [Thursday, March 29, 2012 4:45 PM] -- Rajesh Y says:

    Please let me know in which place you are located.

    [Thursday, March 29, 2012 4:47 PM] -- David Frith says:

    Melbourne, Australia

    [Thursday, March 29, 2012 4:48 PM] -- Rajesh Y says:

    Okay.

    [Thursday, March 29, 2012 4:49 PM] -- Rajesh Y says:

    David, according to your product serial number SGCX320500, your product warranty for support has expired on 10th September 2004 and as this product is Out of Warranty we would not be in a position to provide support

    [Thursday, March 29, 2012 4:49 PM] -- Rajesh Y says:

    We have other options available to assist you:

    • HP Parts Store - Lookup parts and order online http://h20141.www2.hp.com/hpparts/Default.asp

    • HP Web Forum - Discussion group, post your question to other users and technicians.

    http://forums.itrc.hp.com/cm/1,,2,00.html

    • HP Product Support Site - Download manuals, drivers and other help files.

    http://welcome.hp.com/country/us/en/support.html

    • Microsoft TechNet - search Microsoft for known issues http://www.microsoft.com/technet/default.asp

    • Authorized Service Partner locator

    http://h20465.www2.hp.com/GPL/search.aspx?language​_code=encountry_code=usSearchType=SSP

    [Thursday, March 29, 2012 4:50 PM] -- Rajesh Y says:

    You could access HP Guided Troubleshooting Steps (GTS) which are available on HP.com. GTS will help you solve common issues with various HP products. You could access them at the following link:

    http://h20499.www2.hp.com/gts/sparks/public/Admin_​Navigate_All_All_All?lang=encc=usproduct=naseri​...

    [Thursday, March 29, 2012 4:53 PM] -- David Frith says:

    Listen. I have a major issue here. This is a large public hospital. A big customer of HP.

    We have an issue where the print spooler crashes on the Terminal Server farm HP have an article outlining a fix It says to contact support This is what I am doing Do not send me cut and paste crap Please read this link

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?objectID=c01682861dimid=1001553288di​...

    [Thursday, March 29, 2012 4:53 PM] -- David Frith says:

    then tell me how I get these files

    [Thursday, March 29, 2012 4:53 PM] -- David Frith says:

    •32-Bit: hpzbdi.dll (1.1.2.51)

    •64-Bit: hpzbdi.dll (1.2.2.51)

    [Thursday, March 29, 2012 4:53 PM] -- David Frith says:

    that is all I want

    [Thursday, March 29, 2012 4:54 PM] -- Rajesh Y says:

    David, I understand the inconvenience caused to you. We would be only able to provide support to the printer within warranty.

    However, you could contact the HP Phone support for complete assistance.

    The contact number is mentioned below:

    1300 721 147

    If dialing internationally: +61 3 8833 5000 Monday - Friday - 9am - 5:30pm Saturday 10am - 3pm (excluding public holidays)

    Please note that there would be a charge in case to you decide to continue with the phone support

    [Thursday, March 29, 2012 4:55 PM] -- David Frith says:

    This is stupid

    Have you read the article

    It says “As noted above, the updated hpzbdi.dll files can be obtained via the standard escalation process.”

    Please tell me how to get these files

    [Thursday, March 29, 2012 4:56 PM] -- Rajesh Y says:

    David, I had already provided the information to you. Please contact the HP Phone support to get support on chargeable basis.

    [Thursday, March 29, 2012 4:57 PM] -- David Frith says:

    If I get a serial number for a printer in warranty, can you get the files ?

    [Thursday, March 29, 2012 4:58 PM] -- David Frith says:

    Also note that liability for a product that is not fit for purpose extends past it’s warranty date. This means, if HP’s drivers crash our server, they are required to fix them regardless of warranty

    [Thursday, March 29, 2012 4:58 PM] -- Rajesh Y says:

    David, we need the serial number of printer which is having the issue and that too be under warranty

    [Thursday, March 29, 2012 4:59 PM] -- David Frith says:

    um, the printer does not have the issue, the drivers do......

    [Thursday, March 29, 2012 4:59 PM] -- David Frith says:

    I'll get details for an hp printer, which is new, and will be using these drivers

    [Thursday, March 29, 2012 4:59 PM] -- David Frith says:

    please hold

    [Thursday, March 29, 2012 4:59 PM] -- Rajesh Y says:

    David, I would like to inform you that spooler is not part of printer driver. The spooler is service provided by operating system.

    [Thursday, March 29, 2012 5:01 PM] -- David Frith says:

    yes, your own article indicates that the noted DLL is the problem

    [Thursday, March 29, 2012 5:01 PM] -- Rajesh Y says:

    In order to get the Dll files, please re-install the printer driver.

    [Thursday, March 29, 2012 5:04 PM] -- David Frith says:

    Um, no these are intrnall DLL's

    [Thursday, March 29, 2012 5:04 PM] -- David Frith says:

    please read this

    [Thursday, March 29, 2012 5:04 PM] -- David Frith says:

    The following are the latest versions of hpzbdi.dll and are not publicly available on hp.com as they were not intended for public release. The updated dll files will need to be delivered on a case by case basis via the standard escalation process from HP:

    •32-Bit: hpzbdi.dll (1.1.2.51)

    •64-Bit: hpzbdi.dll (1.2.2.51)

    [Thursday, March 29, 2012 5:04 PM] -- David Frith says:

    The updated dll files will need to be delivered on a case by

    [Thursday, March 29, 2012 5:05 PM] -- Rajesh Y says:

    I am sorry to say that we do not have seperate dll files available with us. In orer to get the dll files, please re-install the printer driver.

    [Thursday, March 29, 2012 5:05 PM] -- David Frith says:

    I have to go get this serial number, back in 5 mni

    [Thursday, March 29, 2012 5:05 PM] -- Rajesh Y says:

    OKay.

    [Thursday, March 29, 2012 5:11 PM] -- David Frith says:

    hang on, you don't have these files ?

    [Thursday, March 29, 2012 5:12 PM] -- David Frith says:

    that this article talks about

    [Thursday, March 29, 2012 5:12 PM] -- David Frith says:

    so a serail number will not help

    [Thursday, March 29, 2012 5:12 PM] -- David Frith says:

    can you escalate this

    [Thursday, March 29, 2012 5:12 PM] -- David Frith says:

    ?

    [Thursday, March 29, 2012 5:12 PM] -- David Frith says:

    you have read that I have ended up here by reading an HP support document

    [Thursday, March 29, 2012 5:12 PM] -- Rajesh Y says:

    David, I have already informed you that we only provide support to printer within warranty.

    [Thursday, March 29, 2012 5:13 PM] -- Rajesh Y says:

    If the printer is out of warranty then we would be unable to assist you.

    [Thursday, March 29, 2012 5:13 PM] -- David Frith says:

    yes, but even if I give you one, can you get these files ?

    [Thursday, March 29, 2012 5:13 PM] -- Rajesh Y says:

    However, you could contact the HP Phone support for complete assistance.

    The contact number is mentioned below:

    1300 721 147

    If dialing internationally: +61 3 8833 5000 Monday - Friday - 9am - 5:30pm Saturday 10am - 3pm (excluding public holidays)

    Please note that there would be a charge in case to you decide to continue with the phone support

    [Thursday, March 29, 2012 5:14 PM] -- David Frith says:

    here is one, hopefully

    [Thursday, March 29, 2012 5:14 PM] -- David Frith says:

    CB516A

    [Thursday, March 29, 2012 5:14 PM] -- David Frith says:

    CNFY312755

    [Thursday, March 29, 2012 5:15 PM] -- Rajesh Y says:

    David, we could not take multiple serial number of printer in the same chat session. I would request you to start the new chat session.

    [Thursday, March 29, 2012 5:16 PM] -- Rajesh Y says:

    However, I would like to inform you that this printer's warranty has also expired on 5th August 2011.

    [Thursday, March 29, 2012 5:17 PM] -- David Frith says:

    I have just checked the print server, we have over 100 HP printers. I'm sure some are in warranty.

    [Thursday, March 29, 2012 5:17 PM] -- David Frith says:

    Can you escalate this call?

    DB:2.54:Comedy xp


    Hi David,

    The recommended path to resolve the issue is to upgrade to the latest UPD driver which does not use an hpzbdi files. The latest version of the driver has changes for a terminal server environment.

    UPD is available here:

    www.hp.com/go/UPD

    It is recommend that the UPD in a Citrix Environment be reviewed. You can find it by the following:
    Start at www.hp.com/go/UPDClick on the Documentation TabScroll down and click on "HP Printers Supported in Citrix Presentation Server Environments (PDF)
    Migrating the print queues on the Print Server can be automated using AutoUpgradeUPD.exe in the PARK.

    The PARK is available the the same download page as the UPD.
    Click on the Download Software on the same URL from above.Select driver PDL and OS.Scroll down to HP Printer Administrator Resource Kit.
    At the same time, grab the System Administrator's Guide as well as a resource.

    Making sure that the content is familiar and that the preparation for the roll is key in making it go smoothly.

    It is highly recommended that the UPD driver be qualified in a test environment prior to rolling into production.

  • RELEVANCY SCORE 2.54

    DB:2.54:Ap1230 Hot Standby Issue zp



    Hello,

    I'm setting an AP1230 to be the backup for another Ap1230. I did everything from the Cisco Manual Configuring a Hot Standby. I'm cloning all the parameters from the monitored AP except IP address and Hot Standby setting. My polling is set to every 5 secs and my timeout 600 secs.

    My problem is that after 600 secs the Standby becomes active even thought the other AP is still up and running ( I set a wireless terminal to transfer 255 bytes every 2 secs) and I am monitoring the client association.

    I don't know why the Standby thinks that the monitored unit is malfunctioning. If you have seen this before please let me hear your experience.

    thank you!

    DB:2.54:Ap1230 Hot Standby Issue zp


    Did you try increasing the polling interval to a higher number. If there a lot on traffic on your netowork, 5 sec polling may not be enough.

  • RELEVANCY SCORE 2.54

    DB:2.54:What's Sprint Mobile Hotspot kj



    Have you taken a look inside your wireless and networks? Have you see the option to turn mobile hot spot on/off. Sprints mobile hot spot will allow your phone to become a wireless router. Your device will boradcast a wireless signal using sprints 3G netwrork. Here's the deal this service is not free. Sprint will charge you value29.99 s month at a pro rated fee. The fee comes out to being a dollar a day really, but there's a 5GB data cap. Once you hit the 5GB sprint will throttle you. You can turn the hot spot feature on, and other devices will be able to see it, but if you dont have it turned on at sprints end then you will never be able to connect to it.

    DB:2.54:What's Sprint Mobile Hotspot kj


    Have you taken a look inside your wireless and networks? Have you see the option to turn mobile hot spot on/off. Sprints mobile hot spot will allow your phone to become a wireless router. Your device will boradcast a wireless signal using sprints 3G netwrork. Here's the deal this service is not free. Sprint will charge you value29.99 s month at a pro rated fee. The fee comes out to being a dollar a day really, but there's a 5GB data cap. Once you hit the 5GB sprint will throttle you. You can turn the hot spot feature on, and other devices will be able to see it, but if you dont have it turned on at sprints end then you will never be able to connect to it.

  • RELEVANCY SCORE 2.54

    DB:2.54:Is The Ac Adapter Supposed To Be This Hot... am



    I got Acer Aspire E1 470 laptop! is it normal that your ac adaptor gone hot ? its hot when the first touch but as you hold it its got normal warmth u feel! Im just worried my other classmate laptop dont get their ac adaptor hot that much!







    Solved!
    Go to Solution.

    DB:2.54:Is The Ac Adapter Supposed To Be This Hot... am


    everything works fine its just that sometimes it gone hot for a normal usage! Thanks for the info, I'll keep an eye on my ac adapter

  • RELEVANCY SCORE 2.54

    DB:2.54:Please Bring Back The What's Hot On Fios Widget ( What's Hot On Tv) 7f



    I found this Widget extremely helpful; especially to see what was Hot on TV for the night.

    I believe they showed the Top 15 Shows! Please Please Bring It Back. I'm sure other customers found this widget also extremely Valuable/Helpful. I live in New Jersey.

    Also your Customer Service is definitely improving compared to 1 year ago.

    KEEP UP THE GOOD WORK VERIZON! It is very much appreciated.

    DB:2.54:Please Bring Back The What's Hot On Fios Widget ( What's Hot On Tv) 7f

    What a stupid response by Verizon. How is "bring back something we already had" an idea. Just bring back the whats hot in tv widget Verizon

  • RELEVANCY SCORE 2.54

    DB:2.54:Dyson Tech Heats Up - Best Buy: Unboxed 8a


    Visitors to the Dyson website recently have been greeted with a digital count of sorts. Beginning at 0 and stopping at 72 with the date 15.9.2011 (It’s a British company, remember), visitors are left guessing what this new technology will be. The wait is now over. The countdown has been replaced with information on the Dyson Hot™ fan heater.

    This will no doubt be one of the hot (pun intended) items this fall. In a week where Minnesota temperatures have gone from mid 80’s to mid 30’s, the timing couldn’t be better.

    Dyson Air Multiplier Ceramic Heater - Iron/Blue
    Model: 22159-01 | SKU: 2809717

    Stay warm with this portable heater that features Air Multiplier technology and long-range heat projection to quickly heat up to 240 sq. ft. of space. Oscillation helps distribute warm air evenly throughout a room.

    Read reviews (0)

    Sale: $399.99

    The size of their table fan and shaped like their tower fan, the Dyson Hot™, or AM04 fan heater, has everything that makes their fans great: no spinning blades, touch tilt, 90 degree oscillation, and a remote control that magnetically attaches to the top of the heater when not in use.

    But what makes it a great heater? Heating elements heat the air that is drawn in through the base. The oscillation allows the heated air to travel to all corners of the room faster. Remember the digital readout on the website? This heater has a precise temperature control with digital readout, allowing you to perfectly set the temperature of your room. When your temperature is achieved, the heating unit will shut off, but the fan will continue to run, continually testing the air temperature.

    Ever notice a burning smell using a traditional heater? This is from the heating elements burning the dust that has collected on them. You won’t have that with the Dyson Hot. The heating elements never exceed 392° F versus the 752° F required to burn dust.

    Dyson makes the claim that this will heat your room faster than any other space heater on the market. Given their track record, I’m inclined to believe them. Always aware of design as well as function, the heaters are introduced in the color schemes of silver/white and iron/blue. Look for the Dyson Hot™ fan heater on BestBuy.com or at a Best Buy near you.

    DB:2.54:Dyson Tech Heats Up - Best Buy: Unboxed 8a

    Visitors to the Dyson website recently have been greeted with a digital count of sorts. Beginning at 0 and stopping at 72 with the date 15.9.2011 (It’s a British company, remember), visitors are left guessing what this new technology will be. The wait is now over. The countdown has been replaced with information on the Dyson Hot™ fan heater.

    This will no doubt be one of the hot (pun intended) items this fall. In a week where Minnesota temperatures have gone from mid 80’s to mid 30’s, the timing couldn’t be better.

    Dyson Air Multiplier Ceramic Heater - Iron/Blue
    Model: 22159-01 | SKU: 2809717

    Stay warm with this portable heater that features Air Multiplier technology and long-range heat projection to quickly heat up to 240 sq. ft. of space. Oscillation helps distribute warm air evenly throughout a room.

    Read reviews (0)

    Sale: $399.99

    The size of their table fan and shaped like their tower fan, the Dyson Hot™, or AM04 fan heater, has everything that makes their fans great: no spinning blades, touch tilt, 90 degree oscillation, and a remote control that magnetically attaches to the top of the heater when not in use.

    But what makes it a great heater? Heating elements heat the air that is drawn in through the base. The oscillation allows the heated air to travel to all corners of the room faster. Remember the digital readout on the website? This heater has a precise temperature control with digital readout, allowing you to perfectly set the temperature of your room. When your temperature is achieved, the heating unit will shut off, but the fan will continue to run, continually testing the air temperature.

    Ever notice a burning smell using a traditional heater? This is from the heating elements burning the dust that has collected on them. You won’t have that with the Dyson Hot. The heating elements never exceed 392° F versus the 752° F required to burn dust.

    Dyson makes the claim that this will heat your room faster than any other space heater on the market. Given their track record, I’m inclined to believe them. Always aware of design as well as function, the heaters are introduced in the color schemes of silver/white and iron/blue. Look for the Dyson Hot™ fan heater on BestBuy.com or at a Best Buy near you.

  • RELEVANCY SCORE 2.53

    DB:2.53:Overheating Powerbook? 8m


    My powerbook runs hot. When it runs hot, it's slower than molasses. What do you guys do to keep your powerbooks cool??? Do the new macbook pros have this problem?

    DB:2.53:Overheating Powerbook? 8m

    I have noticed quite a bit of overheating. I see temps of over 145 degrees at times.

    Last week I bought 2 diferent cooling pads. A cheapy one with a single fan for my work truck and a nice dual fan Targus with 4 usb ports built in that I use strictly for my desk setup. Seeing temps stay around the 90s and low 100s with the Targus, I am completely sold on the value of cooling pads. The PB internal fans rarely come on now. I have ordered a 3 fan pad for my work truck and use the single fan unit in my family room.

  • RELEVANCY SCORE 2.53

    DB:2.53:How Hot Does Your Ibook Get?? 1z


    Just wondering how hot does your iBook get if you leave it running a lot.

    DB:2.53:How Hot Does Your Ibook Get?? 1z

    Normal running temperature is rated between 40-60C (104F - 140F), but if your playing games or other graphic intensive apps it can go over 70C (158F). Going over 70C isn't great since the unit should not be allowed to run at over 74C (165F). If you want to know how hot your machine is search the net for an app called Temperature monitor.

  • RELEVANCY SCORE 2.53

    DB:2.53:Mfc 1815dn Doesn't Retain Manual Network Settings After Reboot m3


    Just received this machine today and it would not save manual ip address settings whether set through the control panel, setip address utility on cdrom or through the web interface. I had to downgrade the firmware. Below is a copy of my chat session for your reference: This is an automated email sent from Dell Chat. The following information is a log of your session. Please save the log for your records. Your session ID for this incident is 15300701. Time Details 11/27/2007 09:58:40AM Session Started with Agent (PTR David S) 11/27/2007 09:58:45AM Agent (PTR David S): Thank you for using Dell Printer Hardware Warranty Chat Support. Please give me a moment to pull up your information. 11/27/2007 10:00:10AM Agent (PTR David S): How may I assist you today? 11/27/2007 10:00:20AM Mike Galbicka: Print server doesn't save manual ip configuration after a reboot. 11/27/2007 10:00:52AM Agent (PTR David S): but you've set it for manual correct? 11/27/2007 10:01:06AM Mike Galbicka: yes 11/27/2007 10:01:10AM Agent (PTR David S): what you will need to do is go to support.dell.com 11/27/2007 10:01:22AM Agent (PTR David S): we will need to run a firmware update 11/27/2007 10:05:24AM Agent (PTR David S): you will need to download the firmware that ends in .hd not the .exe 11/27/2007 10:07:18AM Mike Galbicka: it is downloading - then what 11/27/2007 10:08:34AM Agent (PTR David S): once you've downloaded and saved it.. you will then go to the EWS of the printer (open another explorer window and type in the printers current Ip address in the address bar) 11/27/2007 10:09:25AM Mike Galbicka: update the firmware from the web interface? 11/27/2007 10:09:36AM Agent (PTR David S): yes 11/27/2007 10:09:47AM Agent (PTR David S): you downloaded the .hd file correct? 11/27/2007 10:10:11AM Mike Galbicka: correct but it is slow - another 10 minutes 11/27/2007 10:10:31AM Agent (PTR David S): ok 11/27/2007 10:11:09AM Mike Galbicka: if you know this will correct the problem I will let you go and finish it on my own 11/27/2007 10:11:23AM Mike Galbicka: is this a known issue 11/27/2007 10:11:38AM Agent (PTR David S): as far as I've been told and seen this will correct the issue 11/27/2007 10:12:58AM Mike Galbicka: my current firmware is V4.02.03(1815dn) 05-14-2007 11/27/2007 10:15:53AM Agent (PTR David S): the firmware you are about to put on the printer is the previous firmware... there is currently an issue with that firmware version you have that won't allow the printer to keep a static IP address... we are currently working on fixing that issue at this 11/27/2007 10:17:34AM Mike Galbicka: I have another 1815dn with firmware V4.01.26(1815dn) 10-26-2006 that works fine. 11/27/2007 10:20:53AM Agent (PTR David S): ok... so v4.02.03 is the bad version... then why isn't v4.01.26 on the site... I will have to let someone know this 11/27/2007 10:22:56AM Mike Galbicka: my question as well - the download seems much older 11/27/2007 10:24:16AM Agent (PTR David S): hmm... that is rather odd 11/27/2007 10:29:05AM Agent (PTR David S): has it finished downloading? 11/27/2007 10:30:44AM Mike Galbicka: it just rebooted and I will test - the firmware version now reads V4.01.26(1815dn) 10-26-2006 so their numbering on the download page seems wrong to me 11/27/2007 10:33:49AM Mike Galbicka: rebooted twice and ip is retained - thanks and goodbye 11/27/2007 10:35:24AM Agent (PTR David S): it would appear so 11/27/2007 10:35:33AM Agent (PTR David S): your welcome.. have a great day 11/27/2007 10:35:35AM Session Ended If you require further assistance, please visit us at support.dell.com

    DB:2.53:Mfc 1815dn Doesn't Retain Manual Network Settings After Reboot m3

    Just received this machine today and it would not save manual ip address settings whether set through the control panel, setip address utility on cdrom or through the web interface. I had to downgrade the firmware. Below is a copy of my chat session for your reference: This is an automated email sent from Dell Chat. The following information is a log of your session. Please save the log for your records. Your session ID for this incident is 15300701. Time Details 11/27/2007 09:58:40AM Session Started with Agent (PTR David S) 11/27/2007 09:58:45AM Agent (PTR David S): Thank you for using Dell Printer Hardware Warranty Chat Support. Please give me a moment to pull up your information. 11/27/2007 10:00:10AM Agent (PTR David S): How may I assist you today? 11/27/2007 10:00:20AM Mike Galbicka: Print server doesn't save manual ip configuration after a reboot. 11/27/2007 10:00:52AM Agent (PTR David S): but you've set it for manual correct? 11/27/2007 10:01:06AM Mike Galbicka: yes 11/27/2007 10:01:10AM Agent (PTR David S): what you will need to do is go to support.dell.com 11/27/2007 10:01:22AM Agent (PTR David S): we will need to run a firmware update 11/27/2007 10:05:24AM Agent (PTR David S): you will need to download the firmware that ends in .hd not the .exe 11/27/2007 10:07:18AM Mike Galbicka: it is downloading - then what 11/27/2007 10:08:34AM Agent (PTR David S): once you've downloaded and saved it.. you will then go to the EWS of the printer (open another explorer window and type in the printers current Ip address in the address bar) 11/27/2007 10:09:25AM Mike Galbicka: update the firmware from the web interface? 11/27/2007 10:09:36AM Agent (PTR David S): yes 11/27/2007 10:09:47AM Agent (PTR David S): you downloaded the .hd file correct? 11/27/2007 10:10:11AM Mike Galbicka: correct but it is slow - another 10 minutes 11/27/2007 10:10:31AM Agent (PTR David S): ok 11/27/2007 10:11:09AM Mike Galbicka: if you know this will correct the problem I will let you go and finish it on my own 11/27/2007 10:11:23AM Mike Galbicka: is this a known issue 11/27/2007 10:11:38AM Agent (PTR David S): as far as I've been told and seen this will correct the issue 11/27/2007 10:12:58AM Mike Galbicka: my current firmware is V4.02.03(1815dn) 05-14-2007 11/27/2007 10:15:53AM Agent (PTR David S): the firmware you are about to put on the printer is the previous firmware... there is currently an issue with that firmware version you have that won't allow the printer to keep a static IP address... we are currently working on fixing that issue at this 11/27/2007 10:17:34AM Mike Galbicka: I have another 1815dn with firmware V4.01.26(1815dn) 10-26-2006 that works fine. 11/27/2007 10:20:53AM Agent (PTR David S): ok... so v4.02.03 is the bad version... then why isn't v4.01.26 on the site... I will have to let someone know this 11/27/2007 10:22:56AM Mike Galbicka: my question as well - the download seems much older 11/27/2007 10:24:16AM Agent (PTR David S): hmm... that is rather odd 11/27/2007 10:29:05AM Agent (PTR David S): has it finished downloading? 11/27/2007 10:30:44AM Mike Galbicka: it just rebooted and I will test - the firmware version now reads V4.01.26(1815dn) 10-26-2006 so their numbering on the download page seems wrong to me 11/27/2007 10:33:49AM Mike Galbicka: rebooted twice and ip is retained - thanks and goodbye 11/27/2007 10:35:24AM Agent (PTR David S): it would appear so 11/27/2007 10:35:33AM Agent (PTR David S): your welcome.. have a great day 11/27/2007 10:35:35AM Session Ended If you require further assistance, please visit us at support.dell.com

  • RELEVANCY SCORE 2.53

    DB:2.53:Hot Lap Question ds



    If they select your track for the Hot Lap of the day, do they notify you? Because I just had a track go from 15 downloads to almost 300 without me realizing, and the only reason I can think of is because it was used for a Hot Lap.

    Has this happened to anyone else? I'm a bit surprised to get all this 'fame' so suddenly.

    DB:2.53:Hot Lap Question ds


    Congratulations, and I'm uber glad they fixed that part of the modspot.




  • RELEVANCY SCORE 2.53

    DB:2.53:Are You Worry About Your Xps 700'S Southbridge? 9c


    The southbridge on my xps 700 mobo is very very hot even i just searching the net and not doing any heavy bata loading. Is yours the same? Will it do any damage to the mobo? please confirm yours if you have the time to open the Case and put your fingers on it :D

    DB:2.53:Are You Worry About Your Xps 700'S Southbridge? 9c

    It won't damage the systemboard. My system gets very hot aswell but it will depend also in the room temperature and if you don't have it in a cabinet. :smileyhappy:

  • RELEVANCY SCORE 2.52

    DB:2.52:Hot Lap Not Working? ss



    According to the official playstation blog on tuesday (today) the hot lap would be the track the Farmers Daughter created by Coty4803. However everytime i try doing hot lap the track is still Crazy Crater ( which was the hot lap on Monday ). Is this only happening to me or do i have to do something to acess user created hot laps? Thank you for your time.




    DB:2.52:Hot Lap Not Working? ss

    Ptree818 wrote:
    yes hello , the hot lap is in fact working if u notice the times are normal instead of 0.00.
    Lol. No they are not. Crazy Crater has been hotlap for 2 days. But the track that was suppose to be hotlap today is getting bumped to next Monday.



  • RELEVANCY SCORE 2.52

    DB:2.52:Re:Ron Rme-02014 When Testing Scm Install 9ids Rel2 pd


    Peter,

    The dropped connection is the result but not the cause.

    Have you set the database init.ora parameters to those suggested in the install guide. I am guessing
    that your value of open_cursors is too low, try setting it to 3000.

    regards,

    David

    DB:2.52:Re:Ron Rme-02014 When Testing Scm Install 9ids Rel2 pd

    Peter,

    9.2.0.1 is now available on OTN.

    regards,

    David

  • RELEVANCY SCORE 2.52

    DB:2.52:Photography Tips (Video!) xf


    In this video Ill give you some very basic tip that will help you shoot great pictures with your smartphones.

    For the OnePlus One fans, unfortunately I shot this video in HD instead of 4K UHD, as indeed I usually do. This is because I just updated the firmware to the 38R OTA and I forgot to re-adjust the camera settings, so I accidentally recorded in HD.

    @David S. @Emmanuel @Cat H

    DB:2.52:Photography Tips (Video!) xf

    Xero said:

    And if you tag more than 5 people, it wont notify anyone !Click to expand...

  • RELEVANCY SCORE 2.52

    DB:2.52:Re: Waitfornextperiod() Returning After Deadline Miss d3


    Gordon,

    If you call waitForNextPeriod when you have missed a deadline, and you have no deadline-miss handler installed, then wfnp will return immediately with the value "false".

    However, if you have set your periods and deadlines so small that the process of setting/checking for deadline misses itself takes longer than the period (or is very close), things are likely to become unstable.

    David

    DB:2.52:Re: Waitfornextperiod() Returning After Deadline Miss d3

    Gordon_Realtime wrote:
    I just wanted to be sure, because this seems anti-intuitive. The return of false is the only way to report that a deadline was missed (in the absence of a handler). By returning immediately it allows the thread to try and take corrective action before the next release is due (for deadline period anyway).

    Is there any other possibility to pause a RealtimeThread for an exact Period of time beside waitForNextPeriod() or RealtimeThread.sleep() ? waitForNextPeriod() does not pause for an exact period of time, it blocks until a pre-determined absolute release time is reached. The length of time you "pause" depends on how far ahead of that release time you called it. (This is scheduling at fixed rate.)

    RealtimeThread.sleep() can pause for an "exact" interval (scheduling at fixed interval), or until a given absolute time.

    What else are you looking for?

    David

  • RELEVANCY SCORE 2.52

    DB:2.52:Become A Hot Lap Judge For A Week! pf



    We want to put your tracks submitted for Hot Lap though the ultimate proving grounds... the opinions of your peers!

    That’s right, Hot Lap Tracks will be selected by the MNR community (with our “guidance”) for a following week’s Hot Lap Tracks seating.

    If you are interested in becoming a Hot Lap judge for a week sign up here...

    1.

    2.

    3.

    4.

    5.

    6.

    7.

    8.

    9.

    10.

    More details to come...

    Mark

    DB:2.52:Become A Hot Lap Judge For A Week! pf


    1. John31269

    2. moriarty1975

    3. atheistsw

    4. apricot_jam_IS

    5. parise93

    6. lakabo

    7. dane9261

    8. wipeout_god

    9. panpa00

    10.

    

    it sounds good^^




  • RELEVANCY SCORE 2.52

    DB:2.52:Lose Broadband Every Time Phone Rings cj



    Hi im wondering if any one can help regarding issue with internet when phone rings, router stats below

    ROUTER STATISTICS

    System Up Time:18:31:42

    Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up TimeWANLANWLAN
    PPPoA41282763357001917416918:30:41Up462922353743010360298118:31:42Up34439218919601008018:31:20
    ADSL Link Downstream UpstreamConnection SpeedLine AttenuationNoise Margin
    4095kbps797kbps46.0dB29.1dB3.4dB14.5dB

    When I signed up I was told the following

    You have Sky Broadband Unlimited.

    When you purchased Sky Broadband, we estimated that the maximum download speed for your line was5.0Mbps - 11.4Mbps.

    We constantly monitor your line to make sure it has been set to support the fastest speed possible whilst maintaining a stable connection.

    Line connection testing completed on21/05/2012, resulting in the following settings:

    Download speed setting
    Your connection has been set to a download speed of up to4.1Mbps.

    Upload speed setting
    Your connection has been set to an upload speed of up to0.8Mbps.

    Connection speed says 4095 kbs every speed test says 3.2mbs im wondering if its posible to improve connection speed so i dont lose anymore internet when phone rings.

    I was expecting to at least have 6mbs donload which was no problem when I had bt

    Many thanks

    David

    DB:2.52:Lose Broadband Every Time Phone Rings cj


    thank you for reply chelsea

    I can confirm ive tried eveything test socket and router stats todays router stats have improved below

    ROUTER STATISTICS

    System Up Time:2:55:54

    Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up TimeWANLANWLAN
    PPPoA2022104801340263475152:54:23Up93078583240864530082:55:54Up394742128901026796552:55:32
    ADSL Link Downstream UpstreamConnection SpeedLine AttenuationNoise Margin
    6197kbps797kbps46.5dB29.1dB5.3dB14.4dBPoll Interval:(secs, at least 3s)
    im just wondering if something is happening along the phone line in the area as router stats keep changing all time (noise margin was hitting 7.6db a few times ) thanks again david

  • RELEVANCY SCORE 2.52

    DB:2.52:If Your Laptop It's Getting Hot, You Got To Look At This 3j


    http://www.antec-inc.com/us/pro_details_notebookcooler.php?ProdID=75004

    DB:2.52:If Your Laptop It's Getting Hot, You Got To Look At This 3j


    I have the Cool Pad and I use it on an Inspiron 3500. I paid $19.95 at Staples. Works great and the swivel is nice if you're showing others your screen for presentations, etc. You can read about it here: http://www.roadtools.com/

    Pam

  • RELEVANCY SCORE 2.52

    DB:2.52:Cloud Hot Spot mp



    how close do you need to be to access a cloud hot spot

    DB:2.52:Cloud Hot Spot mp


    Hi cam10,

    Please log into your MySky account for more information on 'The Cloud' as well as the places you can access it.

    If this has answered your question please mark as an Accepted Solution else post on the Sky Forum for the rest of the community to help.




    Tricia07
    Community Coordinator
    Community Welcome, Hints Tips
    Sky Help Centre http://www.sky.com/help

  • RELEVANCY SCORE 2.52

    DB:2.52:Early Supporters - Invites To Share 8d


    Dear @David S. and @Carl

    I would like ask you when invitations to share will be available for Early Supporters?

    Thank you

    Lukas

  • RELEVANCY SCORE 2.52

    DB:2.52:Need Help To Hot Sync Palm With Ibook kp


    I have an "old" Palm product, m105, which hot syncs via a cradle that involves the old-fashioned serial port. I've been able to install and hot sync successfully on PCs before, but never could on my Macs because of the serial pins. I just received today a Keyspan USB serial port adapter from Palm, allowing me to connect the cradle from my laptop to the USB port.

    However, I am unable to hot sync. This message appears on my Palm: "The connection between your handheld computer and the desktop could not be established. Please check your set up and try again." Nothing appears on the laptop computer screen.

    I have checked everything I know to check, but, of course, I've been unsuccessful. I need some direction as to what else to do.

    I'd appreciate any help, and let me know if you need more information from me. Thank you.

    DB:2.52:Need Help To Hot Sync Palm With Ibook kp

    Keyspan just replied, and they had me to install Palm's OS X software from the Palm Web site. I was hesitant, but it worked. I installed it on my Mac desktop at work. I haven't done it on my laptop yet because I have dial-up connection (yuck, I know), and I work out of town. But the Os's are the same as well as everything else.

    Thanks, Michael. I appreciate you giving me that link.

  • RELEVANCY SCORE 2.51

    DB:2.51:Setting Hot Corners: Xfce + Gala fp



    Hey, Im trying to set Hot Corners on my recently installed Arch. Although Im a newbie, Ive got some help configuring Xfce, gala and plank and would really like to maintain these configuration.Do you guys have some idea on a best way to set hot corners somewhat close to that on eOS?

  • RELEVANCY SCORE 2.51

    DB:2.51:Hot To Make The Text Wrap And Space 9m



    Create a GUISkin and under the label section set what ever you like.


    Attach the Skin to your script and then use it.


    The code should look something like this:


    var myGUIStyle: GUISkin;


    function OnGUI(){


    GUI.Label( Rect(0,0, 200, 20), My Content, myGUIStyle.label); }

    DB:2.51:Hot To Make The Text Wrap And Space 9m


    Create a GUISkin and under the label section set what ever you like.


    Attach the Skin to your script and then use it.


    The code should look something like this:


    var myGUIStyle: GUISkin;


    function OnGUI(){


    GUI.Label( Rect(0,0, 200, 20), My Content, myGUIStyle.label); }

  • RELEVANCY SCORE 2.51

    DB:2.51:David Vonderhaar's Twitter - V1.06 3x



    David Vonderhaar just posted on his twitter:

    "Ok! *cracks knuckles* v1.06? Me, you, and @DJVahnare going to get straight bucknasty today."

    Does that mean patch 1.06 is coming out? Does anyone have any info about this?

    DB:2.51:David Vonderhaar's Twitter - V1.06 3x


    Latest on the 1.06 patch -

    "Nothing official on date. We are shooting for mid month but it depends on what happens here the next few weeks."

    http://twitter.com/DavidVonderhaar/status/22344294123704320




  • RELEVANCY SCORE 2.51

    DB:2.51:Can You Tell Me It Is Possible To Do Hot Backup Without Using Rman???? xa


    hey all,i need your support....can anyone tell me how to do hot backup without using RMAN...thank you in advance....

    DB:2.51:Can You Tell Me It Is Possible To Do Hot Backup Without Using Rman???? xa

    hey all,i need your support....can anyone tell me how to do hot backup without using RMAN...thank you in advance....

  • RELEVANCY SCORE 2.51

    DB:2.51:How To Get Custom Track In Hot Lap Of The Day? 7z



    Lately I have been seeing some tracks not made by UFG being hosted for hot lap of the day. How do you get a chance to get your track shown there?




  • RELEVANCY SCORE 2.51

    DB:2.51:Thinapp A Program With Hot Key Capability p1



    Hi All,

    We're trying to thinapp an application wich is bring to the front of the desktop by pressing an hot key combination (WordFinder - hot key 'ctrl+shift').

    When working with a program like ms-word or notepad, you select a word and then press the hot key sequence.

    Normally the WordFinder program is then maximized and the word selected appears on the search field automatically.

    In our case, pushing the hot key sequence does nothing.

    Is it possible to thinapp an application which reacts on a hot key sequence ?

    Thanks for your help

    synw

    DB:2.51:Thinapp A Program With Hot Key Capability p1


    Great Job !

    I tried the ExternalDLLs option with the dll's and found that one of the dll's is used to create the hook/hotkey.

    Many thanks for your help guys !

    buijspa

  • RELEVANCY SCORE 2.51

    DB:2.51:Re: Is It Possible To Use "Db_Verify *" Without Lock-Files In Same Directory? a3


    the __db.00* files are region files used by Berkeley DB internally. You can set a dedicated directory to put your database files, see http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/env_set_data_dir.html

    David Zhao, Oracle Berkeley DB

    DB:2.51:Re: Is It Possible To Use "Db_Verify *" Without Lock-Files In Same Directory? a3

    OK, this seems to be not possible at the moment. Maybe it is possible to add a switch in a later release like "-s skip files that seem to be no BDB files". The BDB utils could than have a look at the file header to know if this should be a BDB file or not.

    gbkka

  • RELEVANCY SCORE 2.51

    DB:2.51:Java Game Engine 37


    Hi

    I know this question has been asked before (probably 100's of times), but bear with me please.

    I laboriously went through the book Developing Games in Java, by David Brackeen, even to the point of making a 2D Side Scroller, with paralax backgrounds etc etc, which works fine. Its just very difficult to create a new game from the code.

    I was looking for a sh** hot java game engine, if any of you know of one, or more to the point, have actually used

    DB:2.51:Java Game Engine 37

    the entire idea of java is reusable code. making a program short simple make work, and maybe even better in the short-run, but when it comes to developing another game, or upgrading your program, code reusability is great.

    in other words, for simple programs where you don't plan to reuse the code, your method works fine, but the entire idea of java is to simplify the process of creating complex video games, where using another person's game engine is probably a good idea because it saves a lot of effort (unless it obviously doesn't fit your needs)

  • RELEVANCY SCORE 2.51

    DB:2.51:Make Sure You Reset Your Wifi 1f


    If you are swapping an iphone 3g sim into a PAYG 3g S handset or maybe you have upgraded your handset you will need to reset your wifi with o2 once you have your new handset active.This will allow your new handset to use The Cloud BT Openzone Hot Spots...Use the link belowhttps://www.o2.co.uk/apps/help/help?qid=29q1=26

    DB:2.51:Make Sure You Reset Your Wifi 1f

    No email yet though



    Iphone 4 for right handers only

  • RELEVANCY SCORE 2.51

    DB:2.51:Thread: Re: Slow Connection (Randomly).... x3


    I noticed that you\'re running Symantec AV on your server/s. Make sure

    your servers are set to only scan incoming files.

    Also, more importantly, because you have Symantec AV on your server/s,

    if you have Symantec AV on your workstations configure your

    workstations to not scan Network Drives.

    DB:2.51:Thread: Re: Slow Connection (Randomly).... x3

    Eh, better late then never. And who knows asjhdklashd may find his way back

    to it.

    -' + '-

    Tony Pedretti

  • RELEVANCY SCORE 2.51

    DB:2.51:Will S-Video Cable Allow Full Colour Dvd Playback? 89



    now i'm sure many people know about the crippled rgb dvd playback on the ps3 (just like on the ps2, if you play dvds through rgb it will only send the green signal)

    does the s-video cable suffer from the same problem?

    just thought it might be a better option than having to switch cables whenever i want to watch a dvd (and my 360 makes the discs hot so i dont like to use that)




    --------------------------------------main psn id TheDragonRiderhttp://community.eu.playstation.com/playstationeu/board/message?board.id=611thread.id=2918view=by_...david reeves"the first five million are going to buy it, whatever it is, even it didn't have games."some ps3 owners have a track record of being sycophantic fanboys| Playstation forum thread | Original article | Notepad file containing HTML code for sig' |

    DB:2.51:Will S-Video Cable Allow Full Colour Dvd Playback? 89


    thanks for the answers, just sent off the order.

    pain that scee decided to once again cripple that feature for eu machines.

    still hopefully it wont be an issue now.




    --------------------------------------main psn id TheDragonRiderhttp://community.eu.playstation.com/playstationeu/board/message?board.id=611thread.id=2918view=by_...david reeves"the first five million are going to buy it, whatever it is, even it didn't have games."some ps3 owners have a track record of being sycophantic fanboys| Playstation forum thread | Original article | Notepad file containing HTML code for sig' |

  • RELEVANCY SCORE 2.50

    DB:2.50:Your Hot Corners!!!!! kj


    I don't know about you but I LOVE my hot corners on the Intel Macs .... works perfectly with Intel... maybe too perfectly? The use of hot corners usually lets me dance so brightlantly on the screen... i just had to tweet about it... what do you think about your hot corners?

    DB:2.50:Your Hot Corners!!!!! kj

    Thanks for answering. I did change setting for hot corners (of which I had never heard until today) and that hashelped. I may change again to get back to where I once was.

  • RELEVANCY SCORE 2.50

    DB:2.50:Re: Accidently Deleted Archive Logs cm


    Important remark, you DON'T need to shutdown your database for a hot backup, that's the main difference between cold and hot.

    DB:2.50:Re: Accidently Deleted Archive Logs cm

    Hi,

    I must admit I did not read every reply to the thread, but:

    "we have to admit that we didnt do any backups after we have switched the DB to archivelog mode. I think this is the biggest mistake we have done."
    This means you have none available backup of your database..

    Archived redo logs are... deltas. In order to use those deltas, you MUST have a starting point. The starting point is a cold/hot backup of your database.

    Keep in mind that you MUST keep every archived redo log file created during the time-window between the oldest member of the start-point and now.

    Please read from cover to cover the Backup and Recovery Concepts doc (available here)..

    Regards,

    Yoann.

  • RELEVANCY SCORE 2.50

    DB:2.50:The People Vs Heavy Rain 9k


    Heavy Rain Fans!

    You might have noticed that we recently asked OPC to submit their questions for a Final Fantasy XIII interview...

    Hot off the heels of that we've managed to secure an interview with both actor David Cage AND Quantic Dreams co-founder Guillaume de Fondaumière! Awesome right?

    We want you to give us questions to ask. All you need to do is jump over to our Heavy Rain forum and post your questions into this thread.

    See you there

    MB




    You should follow me on Twitter

    DB:2.50:The People Vs Heavy Rain 9k


    how does a multi million pound game, devleoped over a number of years by so many people end up being so full of glitches on release that it is almost unplayable?




  • RELEVANCY SCORE 2.50

    DB:2.50:Ai Scripting 77



    You don't use the Unity libraries assembly so it doesn't know the unity-unique variables. Just add

    using UnityEngine;
    using System.Collections;



    to the top of all your C# (you don't need it in JavaScript) scripts and you should be set.



    David

    DB:2.50:Ai Scripting 77


    You don't use the Unity libraries assembly so it doesn't know the unity-unique variables. Just add

    using UnityEngine;
    using System.Collections;



    to the top of all your C# (you don't need it in JavaScript) scripts and you should be set.



    David