• RELEVANCY SCORE 3.29

    DB:3.29:Feature Request: Intuitive Scope Control jk





    The Problem:There is no way to control the scope of the music without changing the current song that is playing.Solution #1:If "Play All" is selected from any music menu, the scope should change but the currently playing song should finish. This would allow me to select a specific song I want to hear but then immediately change the scope of the music. Maybe there could be a "Play All" as well as a "Play All Now" selection.Solution #2:Alternatively, if "Play All" is selected from any music menu that includes the currently playing song, the scope should change but the currently playing song should finish.Solution #3:Selecting a specific song rather than "Play All" will not change the scope of the music. Once that song is done, the player will return to the previously selected scope.An Example:Let's say I want to hear the song "King's Highway" by "Kenny Wayne Sheppard" from the album "Trouble Is" in the genre "Blues." I know the genre, artist, and album so it is most convenient for me to select the song by choosing "Music Genre Blues Kenny Wayne Sheppard Trouble Is King's Highway." But I don't want to only listen to this album. I also want to listen to other blues music. So, intuitively, I should be able to select "Music Genre Blues Play All" and not have the current song change, especially since the current song is in the newly selected scope.PS: I'm really waiting for the firmware upgrade that will stop my Clip from being on 100% of the time it is plugged in to my computer. :-)Message Edited by justinjstark on 02-16-2008 03:37 PMMessage Edited by justinjstark on 02-16-2008 03:37 PM

    DB:3.29:Feature Request: Intuitive Scope Control jk

    What you're referring to is the display, which is always on while connected to the computer. The Clip has to be on while connected, or else you can't transfer your music But yeah, it would be nice if the display would go off. Some people here have asked for that, as well.justinjstark wrote:PS: I'm really waiting for the firmware upgrade that will stop my Clip from being on 100% of the time it is plugged in to my computer.Message Edited by Sasafrass452 on 02-17-2008 10:11 AM

  • RELEVANCY SCORE 2.94

    DB:2.94:Easier, More Intuitive Way To Use Lightbox Widget For Video (Youtube, Vimeo, Etc) Streaming. 3m






    I have the exchange widget and have found a few tutorials, but it is not very intuitive.

    One feature request would be easier, more intuitive way to use lightbox widget for video (youtube, vimeo, etc) streaming.

    DB:2.94:Easier, More Intuitive Way To Use Lightbox Widget For Video (Youtube, Vimeo, Etc) Streaming. 3m


    I have the exchange widget and have found a few tutorials, but it is not very intuitive.

    One feature request would be easier, more intuitive way to use lightbox widget for video (youtube, vimeo, etc) streaming.

  • RELEVANCY SCORE 2.73

    DB:2.73:Re: Require Sum Value Of One Table To Be Inserted Into Another Table Column af


    This is probably a bit beyond the scope of this forum, but in your materials prices table, would you also not need to include a check constraint to prevent there being multiple 'live' prices for the same material?

    Alternatively, you could create a synthetic key to represent that material/price combo and use that as a foreign key field in your request table (instead of the materials key) - the former is probably a bit more intuitive!

  • RELEVANCY SCORE 2.66

    DB:2.66:Feature Request - Bandwidth Control Schedule x9



    Not sure if this has been suggested in the past. I would love to see an option for a schedule on the bandwidth control for Airmax devices. I have a few users that LOVE to downlaod HD movies from Apple and Amazon. I generally control the maximum rates and bursting on the CPE. I wish I could give those folks more bandwith through the CPE from 2am-5am to get them downloaded and off my network. Instead they are running all night and into the next day to download their 16Gb movie... ugh...

    DB:2.66:Feature Request - Bandwidth Control Schedule x9


    I have not used any edgemax equipment but I am thinking of buying one and considering a switch. It would be easier to centralize control so that I did not have to log into each CPE to make changes.

  • RELEVANCY SCORE 2.64

    DB:2.64:Better Parental Controls 37



    I used to use BT and switched to SKY......Sky needs to follow BT's example as in the days of multiple devices being connected via wifi, better control is needed.

    The BT controls are easy and intuitive to use and allow control over specific devices so, for intance, I could cut the wifi to my daughter's iPad at 9pm but leave my iPhone and the PC wifi enabled.

    This should be a simple software/firmware upgrade - the lack of this feature may well see me returning to BT as it shows that SKY's approach to (lack of) parental control is superficial. It shouldn't be hard for SKY to fix this but I suspect it won't.

    DB:2.64:Better Parental Controls 37


    I used to use BT and switched to SKY......Sky needs to follow BT's example as in the days of multiple devices being connected via wifi, better control is needed.

    The BT controls are easy and intuitive to use and allow control over specific devices so, for intance, I could cut the wifi to my daughter's iPad at 9pm but leave my iPhone and the PC wifi enabled.

    This should be a simple software/firmware upgrade - the lack of this feature may well see me returning to BT as it shows that SKY's approach to (lack of) parental control is superficial. It shouldn't be hard for SKY to fix this but I suspect it won't.

  • RELEVANCY SCORE 2.60

    DB:2.60:Feature Request - Z10 Speed Dial jk



    Feature request - Z10 speed dial from number pad

    DB:2.60:Feature Request - Z10 Speed Dial jk


    Very well aware of the current Z10 speed dial methodology.

    It is not very satisfying.

  • RELEVANCY SCORE 2.60

    DB:2.60:An Object Set In The Request Scope ....... 8s


    Any object that is set in the request scope does not have to be Serializable whereas an object in Session scope should be Serializable ?

    is this true at all ?

    DB:2.60:An Object Set In The Request Scope ....... 8s

    In the base of Networking an object is transfered from one place to another palce, so you persist the object value, that is why we use Seriliazible best we always serialize the object

  • RELEVANCY SCORE 2.58

    DB:2.58:Dw Bindings. Request Scope For Coldfusion k7


    Can anybody explain me how can I create a variable in
    REQUEST scope in Dreamwever 8 while working with
    ColdFusion site? I can create "Data source name variable"
    (e.g. #request.dsn#), but it seems no way to create a simple
    variable in REQUEST scope.

    Please help me, I am using this scope extensively.

    Regards, Alex

    DB:2.58:Dw Bindings. Request Scope For Coldfusion k7

    "alex_pogodin" webforumsuser@macromedia.com wrote in
    message
    news:e1rsse$okn$1@forums.macromedia.com...
    Thank you, Tom!

    It works now... Just a few comments. You can't add two
    duplicate
    variables,
    but you can do it if variables dirref case (e.g.
    Request.DSN and
    Request.dSn).
    Just a note...

    Yes, the Macromedia-supplied bindings are like this as well.
    It's a bug.

    Good job, Tom. Thank you again.

    PS. I am wondering why MM doesn't provide this
    functionality from the
    box...

    I don't know. What they choose to supply and not supply is
    always a mystery.
    It took me 20 minutes to add it after I read your post.

    Tom Muck

  • RELEVANCY SCORE 2.54

    DB:2.54:Feature Request: Click And Drag Anywhere To Scroll Start Screen (Or Metro Apps) 8j


    It would be very intuitive and resemble usage on a tablet (like android or ipad) if you could click and drag ANYWHERE on the start screen or a full screen metro app to scroll left and right. Right now I find myself doing that often with no results.
    I wonder if its just habit or something that feels natural for me when looking at this type of interface and a result of owning an iPad and iPhone.

    Having to move the mouse cursor all the way down to grab a tiny little scrollbar is just not intuitive. I would imagine on a touch screen / tablet that this UI would allow you to simply place a finger on the screen anywhere and pan around the app/
    start menus.

    DB:2.54:Feature Request: Click And Drag Anywhere To Scroll Start Screen (Or Metro Apps) 8j

    Anything that relies on screen edges fails miserably in a multi-monitor scenario. This assumedly includes dynamic scrolling.

  • RELEVANCY SCORE 2.54

    DB:2.54:Feature Requests pa


    Feature Request: Add the WndProc method to the Control class in the .NET Compact FrameworkIf you want this feature, please vote for it @ http://connect.microsoft.com/VisualStudio/feedback/ViewFeedback.aspx?FeedbackID=466625

    DB:2.54:Feature Requests pa

    Huh? What for? If somebody is good enough he will know how to do that.If You ask me I can even tell You how to do that :).

    If You'll find my answer satisfactory or helpful - mark it as answered! Thank You.
    Each of these features I've added to my library, and they're also probably available in the Smart Device Framework but they really belong in the BCL becauses that's where the base class of our classes derive from. This eliminates redundancy and improves interopability. More importantly, the class and methods I requested are already available in the .NET Framework. It's a shame developers have to port certain functionality to the .NET Compact Framework when it's already available in the .NET Framework.

  • RELEVANCY SCORE 2.54

    DB:2.54:Webapplication Scope Feature Receiver That Makes Modifications To The Web.Config z9


    I have a feature at the webapplication score which contains a feature receiver, this feature receiver makes modifications to the web.config like adding an authorizedType on featureActivated and removing it on featureDeactivating.
    This works correctly and when I deploy my solution my event receiver seems to work properly and adds the modifications.
    If I manually activate/deactivate the webapplication feature through the Manage Features on the SharePoint Central Administration site this works the other way around. i.e. deactivating the feature adds the web.config modifications and activating removes
    it.
    By doing a bit of manual logging on the feature receiver I realized my logging only gets in when I deploy the solution for the first time and when I manually activate/deactivate the feature SharePoint logs the following:
    04/27/2012 08:59:14.18 w3wp.exe (0x180C) 0x0BEC SharePoint Foundation General 75f8 Medium Feature Activation: Feature 'HotDocs.WorkflowActivities_HotDocs.WorkflowActivities.Init.Config'(ID: '63c1ba5c-92f4-4460-9de6-9611612add0e') was activated. b07f7b8c-fe39-4df8-9faf-ce0b54a3add1
    04/27/2012 08:59:14.18 w3wp.exe (0x180C) 0x0BEC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (Feature Activation:Activating Feature 'HotDocs.WorkflowActivities_HotDocs.WorkflowActivities.Init.Config' (ID: '63c1ba5c-92f4-4460-9de6-9611612add0e').). Execution Time=67.8147641669542 b07f7b8c-fe39-4df8-9faf-ce0b54a3add1
    04/27/2012 08:59:14.18 w3wp.exe (0x180C) 0x0BEC SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (POST:http://hd-spworkflow:7537/_admin/ManageWebAppFeatures.aspx?WebApplicationId=5eae7966da6446f3801f543ade08c3a1IsDlg=1)).Execution Time=142.345465694662 b07f7b8c-fe39-4df8-9faf-ce0b54a3add1
    04/27/2012 08:59:14.19 w3wp.exe (0x180C) 0x1BB8 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://hd-spworkflow:7537/_admin/ManageWebAppFeatures.aspx?IsDlg=1))
    04/27/2012 08:59:14.19 w3wp.exe (0x180C) 0x1BB8 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://hd-spworkflow:7537/_admin/ManageWebAppFeatures.aspx?IsDlg=1) bcaf0a03-d48f-4c03-8544-08d903c3668f
    04/27/2012 08:59:14.19 w3wp.exe (0x180C) 0x1BB8 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ bcaf0a03-d48f-4c03-8544-08d903c3668f
    04/27/2012 08:59:14.20 w3wp.exe (0x180C) 0x1BB8 SharePoint Server General 0000 Medium Constructed a new async cache named Profile PropertyCache bcaf0a03-d48f-4c03-8544-08d903c3668f
    04/27/2012 08:59:14.20 w3wp.exe (0x180C) 0x1BB8 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://hd-spworkflow:32843/ac52c5babd504952a3ce807eccc5e9a0/ProfilePropertyService.svc'Channel: 'Microsoft.Office.Server.UserProfiles.IProfilePropertyService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties' MessageId: 'urn:uuid:19b95bd0-fb68-4348-972b-7eb964004510' bcaf0a03-d48f-4c03-8544-08d903c3668f
    04/27/2012 08:59:14.21 w3wp.exe (0x180C) 0x1BB8 SharePoint Portal Server User Profiles hyc6 High Exception occured while connecting
    to WCF endpoint: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied. Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault
    fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc rpc) at System.ServiceModel.Channels.ServiceChannel.Call(String
    action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData msgData, Int32 type) at Microsoft.Office.Server.UserProfiles.IProfilePropertyService.GetProfileProperties() at Microsoft.Office.Server.UserProfiles.ProfilePropertyServiceClient.c__DisplayClass1.GetProfilePropertiesb__0(IProfilePropertyService
    channel) at Microsoft.Office.Server.UserProfiles.MossClientBase`1.ExecuteOnChannel(String operationName, CodeBlock codeBlock) bcaf0a03-d48f-4c03-8544-08d903c3668f
    04/27/2012 08:59:14.21 w3wp.exe (0x180C) 0x1BB8 SharePoint Portal Server User Profiles g11n High UserProfileApplicationProxy.InitializePropertyCache:
    Microsoft.Office.Server.UserProfiles.UserProfileException: System.ServiceModel.Security.SecurityAccessDeniedException at Microsoft.Office.Server.UserProfiles.MossClientBase`1.ExecuteOnChannel(String operationName, CodeBlock codeBlock)
    at Microsoft.Office.Server.UserProfiles.ProfilePropertyServiceClient.ExecuteOnChannel(String operationName, CodeBlock codeBlock) at Microsoft.Office.Server.UserProfiles.ProfilePropertyServiceClient.GetProfileProperties()
    at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.RefreshProperties(Guid applicationID) at Microsoft.Office.Server.Utilities.SPAsyncCache`2.GetValueNow(K key) at Microsoft.Office.Server.Utilities.SPAsyncCache`2.GetValue(K
    key, Boolean asynchronous) at Microsoft.Office.Server.Administration.UserProfileApplicationProxy.InitializePropertyCache() bcaf0a03-d48f-4c03-8544-08d903c3668f
    04/27/2012 08:59:14.21 w3wp.exe (0x180C) 0x1BB8 SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding
    control 'ASP.SocialDataUserControl': Object reference not set to an instance of an object. bcaf0a03-d48f-4c03-8544-08d903c3668f

    I am logging in to central administration with the system account, what is actually going wrong?

    Thanks

    DB:2.54:Webapplication Scope Feature Receiver That Makes Modifications To The Web.Config z9

    That makes sense. Not sure why I didn't try running under elevated privileges before but that seems to do it. Timer service should be the same as System account so I'm not sure why that exception was being raised, will have to look at it later.
    Thanks

  • RELEVANCY SCORE 2.53

    DB:2.53:Filename Sorting In Windows 7x


    I request that LR on the Windows platform permit the user to select "intuitive filename sorting" or disable this feature. This sorting method has been added with the now older XP plaform release. This was a change in the way XP sorted.

    "In previous versions of Windows, filenames are sorted text-wise, character by character. File1.txt, File10.txt, and File100.txt are all placed before File2.txt, because the digit 1 comes before the digit 2. Most users have grown accustomed to zero-padding sequential numbers in filenamesFile010.txt correctly comes after File002.txt. Under Windows XP, though, each block of consecutive digits is treated as a number and sorted as such. Even without zero-padding, File10.txt comes after File2.txt."

    There is an option in Windows XP to change back to the older -- and preferred -- style of sorting using either a REGEDIT function or simply disabling "intuitive sorting" in TWEAK UI.

    I need LR1.1 to honor the election in XP to sort without using "intuitive filename sorting." Perhaps there is already a way to do this. Please let me know if there is.

    Right now I get the following:

    0024-0013.jpg
    0024-14-01.jpg
    ...
    0024-0014.jpg

    and I need to have:

    0024-0013.jpg
    0024-0014.jpg
    0024-14-01.jpg
    ...

    I can create both sort formats in Windows Explorer by enabling or disabling "intuitive filename sorting." I really need to have LR honor my sorting election made in Windows.

    Thanks.

    DB:2.53:Filename Sorting In Windows 7x

    I request that LR on the Windows platform permit the user to select "intuitive filename sorting" or disable this feature. This sorting method has been added with the now older XP plaform release. This was a change in the way XP sorted.

    "In previous versions of Windows, filenames are sorted text-wise, character by character. File1.txt, File10.txt, and File100.txt are all placed before File2.txt, because the digit 1 comes before the digit 2. Most users have grown accustomed to zero-padding sequential numbers in filenamesFile010.txt correctly comes after File002.txt. Under Windows XP, though, each block of consecutive digits is treated as a number and sorted as such. Even without zero-padding, File10.txt comes after File2.txt."

    There is an option in Windows XP to change back to the older -- and preferred -- style of sorting using either a REGEDIT function or simply disabling "intuitive sorting" in TWEAK UI.

    I need LR1.1 to honor the election in XP to sort without using "intuitive filename sorting." Perhaps there is already a way to do this. Please let me know if there is.

    Right now I get the following:

    0024-0013.jpg
    0024-14-01.jpg
    ...
    0024-0014.jpg

    and I need to have:

    0024-0013.jpg
    0024-0014.jpg
    0024-14-01.jpg
    ...

    I can create both sort formats in Windows Explorer by enabling or disabling "intuitive filename sorting." I really need to have LR honor my sorting election made in Windows.

    Thanks.

  • RELEVANCY SCORE 2.53

    DB:2.53:Labview The Sampling Rate Of Agilent 6000 Scope ck



    how to use Command togetthe Sampling rate of Agilent 6000 scope?

    DB:2.53:Labview The Sampling Rate Of Agilent 6000 Scope ck

    i use this to get sample rate ,but i want to change sample rate by labview,how should i do ?

  • RELEVANCY SCORE 2.53

    DB:2.53:Does This Challange Require Backend Coding? 3s


    Hi,I have just stumbled upon this contest on slashdot, however after reading official challange website and discussion on forum I'm still not sure whether this contest is aimed at frontend/ui designers or backend programmers. I can create clean and intuitive interface with xhtml/css/svg/js and plug it into template engine, but coding my own backend or extending already existing ones is completely out of my scope. From my short research it looks like LuCI is the most feature-complete backend, but does it have enough features to make a web interface that would meet technical requirements specified on the challange website?

  • RELEVANCY SCORE 2.53

    DB:2.53:Thread: Request Remote Control? df


    Is there a way for a user to request a remote control session, without

    right-clicking on the remote control Icon and choosing request remote

    control?

    I want to enable the feature without showing the icon in the systray.

    The other option would be to show the icon in the systray, but disable

    the ability to exit the program

    Any ideas?

    DB:2.53:Thread: Request Remote Control? df

    On Wed, 07 Mar 2007 13:03:46 GMT, Jason wrote:

    Any ideas?

    nope... perhaps you should make an enhancement request:

    http://support.novell.com/enhancement

    -' + '-

    Marcus Breiden

    If you are asked to email me information please change -' + '- to - in my e-mail

    address.

    The content of this mail is my private and personal opinion.

    http://www.edu-magic.net

  • RELEVANCY SCORE 2.51

    DB:2.51:2 Lamers Question About Jsp cx


    I'm rather new in JSP servlets and there are two questions:
    1)I Don't realize the difference between request and page scope in JSP.
    What has page scope compared to request? page scope=request scope?
    2)I have to share one bean between several JSPs within request. How to do this?

    DB:2.51:2 Lamers Question About Jsp cx

    I quote from the jsp specification(Objects and Scopes):

    "Objects are created within a JSP page instance that is responding to a request object. There are several scopes:
    - page - Objects with page scope are accessible only within the page where
    they are created. All references to such an object shall be released after the
    response is sent back to the client from the JSP page or the request is
    forwarded somewhere else. References to objects with page scope are stored
    in the pageContext object.
    - request - Objects with request scope are accessible from pages processing
    the same request where they were created. References to the object shall be
    re-leased after the request is processed. In particular, if the request
    is forwarded to a resource in the same runtime, the object is still reachable. References to objects with request scope are stored in the request object."

    I think that should clear up the confusion.
    So if the request is forwarded to another resource using the jsp:forward element you may access an object with request scope
    but not the objects with page scope.

    Regards
    BG

  • RELEVANCY SCORE 2.51

    DB:2.51:Feature Request: Shutdown Radio From Control Panel as


    I'll happy if UBNT add a new feature like the possibility to shutdown radio of any single ap from control panel ( also the led goes down).More than one client ask us about that feature. Very important if you make an install in big hotel. In that case you wil be able to "power on" only the ap of the client that ask for that service and you can leave always on the ap in the community area like restaurant, bar, etc.Alex

    DB:2.51:Feature Request: Shutdown Radio From Control Panel as

    You can do this. Use the override command.How?Could you be a little more explicit?Thank youAlex

  • RELEVANCY SCORE 2.51

    DB:2.51:How Can We Activate Feature In App Domain ??Its Feature Scope Is Web Default. jm


    How can we activate feature in App domain or see the feature ??its feature scope is web by default.

    DB:2.51:How Can We Activate Feature In App Domain ??Its Feature Scope Is Web Default. jm

    Hi,
    I'm not sure what product or what you're trying to do. This forum is for developers of apps for Office 2013 and SharePoint 2013 and the publishing process to get the apps into the Office Store.
    You may want to look athttp://answers.microsoft.com/en-us/office
    Thanks,
    Jes

  • RELEVANCY SCORE 2.50

    DB:2.50:Runwithelevated Privileges In Feature Receiver Having Web Scope 1f


    What is the correct way of usingRunwithelevated privileges in feature receiver having web scope.

    Yaduvanshi

    DB:2.50:Runwithelevated Privileges In Feature Receiver Having Web Scope 1f

    Hello,
    Could you share your code with us? Also ensure that you are activating feature with admin acocunt so login with system admin and then try to activate feature.
    You can also add below lines in your code to update anything at site and web level:
    site.AllowUnsafeUpdates = true;
    web.AllowUnsafeUpdates = true;
    //your code to update permission
    web.AllowUnsafeUpdates = false;
    site.AllowUnsafeUpdates = false;
    Let us know your result
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • RELEVANCY SCORE 2.50

    DB:2.50:Noise On Analogue Output fz



    Hi All,

    I amn using a PCI-7342 to controla Dc motor. when i measure the output from the motion card with a scope i see high frequency noise spikes. Is there an in built feature i can use to filter the output?

    thanks

    DB:2.50:Noise On Analogue Output fz


    Hi qwerty257,

    I cannot say what would be producing this with the information I currently have. Can you please answer all the questions below so I can have a better idea of what maybe causing this?

    -What port do you have the scope looking at?-What is the range of this “high frequency”?-What is the amplitude of these spikes that you are seeing?-What commands are you running when you see this behavior?-What do you have connected to the motor?-Is the noise always consistent or only when you run certain commands?

    -How is exactly is this effect your motion control?

    -Please attach a screenshot of the scope reading.

    Tim O




    Applications EngineerNational Instruments

  • RELEVANCY SCORE 2.49

    DB:2.49:Modify Recipient Scope Using Rbac c1


    Hi,
    Is it possible to restrict modify recipient scope using RBAC or any other way to control user from modify recipient scope?Kelvin Teang

    DB:2.49:Modify Recipient Scope Using Rbac c1

    Hi,
    I think I need to create New-ManagementScope to totally segregate exchange serversfrom child1 and child2.
    Not sure is it possible to include the tab from Address list,OAB and etc...Kelvin Teang

  • RELEVANCY SCORE 2.49

    DB:2.49:Parental Control Feature 9m



    How do I disable the parental control feature. I would like not to have a request for password when I start a video call.

    DB:2.49:Parental Control Feature 9m


    You may try a third party applications.with that it won't be a problem for you to disable the feature.just close the application will you get the normal entry.http://www.skype-record.com

  • RELEVANCY SCORE 2.48

    DB:2.48:Delegate Control - Site Scope Not Working But Web Scope Works k1


    HI All I wrote a feature to add the a .ascx usercontrol to the controltemplates folder so that a delegate control in the master page can pick it up. The feature file is as follows ?xml version=1.0 encoding=utf-8? Feature  Id=f307de0e-ecfd-4fc2-ad9b-33ea55fe864e           Title=MyCustomWidget           Description=Just a Widget           Version=12.0.0.0           Hidden=FALSE           Scope=Site           DefaultResourceFile=core           xmlns=http://schemas.microsoft.com/sharepoint/   ElementManifests     ElementManifest Location=elements.xml/      /ElementManifests /Feature The elements file point to the Control and is as follows ?xml version=1.0 encoding=utf-8 ? Elements xmlns=http://schemas.microsoft.com/sharepoint/ Control Id=IOFBStockWidget Sequence=10 ControlSrc=~/_controltemplates/MyCustomWidget.ascx / /Elements Am deploing this as a Solution. On activating the solution the the ascx go to controltemplates and the Control's DLL to GAC. On activating the feature Whose Scope is Site it gets activated but the control does not appear on the page. BUT when I redeployed with the feature scope changed to Web and activated the feature at a particular Web level the control appears in the Web. So my problem is the Delegate Control that works for the Web scope is not working for the Site scope PLEASE HELP ME... Thanks in Advance

    pv

    DB:2.48:Delegate Control - Site Scope Not Working But Web Scope Works k1

    you need to check your referance to your DLL on the .ascx file. if you determine the full name of the Assembly(e.g. AssemblyA, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0e13e58ad274a277)it will work from the GAC, but if you didn't - BIN.michal

  • RELEVANCY SCORE 2.48

    DB:2.48:What Different Scope Servlet Context, Request , Session ?? xa


    what different scope servlet context, request , session ??

    example : context.setAttribute, request.setAttribute, session.setAttribute ???

    please give me a example..

    thx

  • RELEVANCY SCORE 2.48

    DB:2.48:Simple Customaction Feature Not Working 17


    I need to code a custom action in the Edit Control Box, something that seems to be very easy... I found a lot of examples about how to do it, but, I'm frustrated because I can't do work anyone!Anybody knows what I'm doing wrong? I attach a simple link example...I'm using WSS3 and I tried it in some machines without success. The feature can be installed and activated, but nothing new appears in the edit menu.If I change the feature to work on other locations (like the SiteActions menu) then it works perfect.Thanks in advance!

    ?xml version=1.0 encoding=utf-8 ? 

    Feature xmlns=http://schemas.microsoft.com/sharepoint/   

        Id=5C2C4F7D-4087-4208-A8DB-F55BC6917003   

        Scope=Site 

        Title=EditControlBlock 

        Version=1.0.0.0   

        Description=Example Custom Feature - This Feature adds links to the EditControlBlock menu.  

      ElementManifests 

        ElementManifest Location=elements.xml / 

      /ElementManifests 

    /Feature 

    DB:2.48:Simple Customaction Feature Not Working 17

    Thanks to all... but it's a long time since I need to find another way to do that (I don't remember what I did, but that custom action never worked...)Now I'm working over the 2010 version and I suppose I'll need to do custom action again soon... I'll thenpost my feelings about that.

  • RELEVANCY SCORE 2.47

    DB:2.47:Request Scope k1


    is the method getList of my DataTable being executed twice in ManagerBean, am I using the scope request, that is normal?

    DB:2.47:Request Scope k1

    If it contains input elements and you're submitting the form, then yes that is normal. Is that an issue then? If you have put some action logic in the getter, then you may need to review your design. Put the data loading logic in the constructor/initblock for example.

    Those articles might be worth reading:
    http://balusc.xs4all.nl/srv/dev-jep-djl.html
    http://balusc.xs4all.nl/srv/dev-jep-dat.html

  • RELEVANCY SCORE 2.47

    DB:2.47:Accessing Property Of One Managed Bean To Another In Request Scope js


    Right now my applications managed beans are in session scope.
    I want to change them to request scope .But the problem is how to access the bean methods to another if they are in request scope

    DB:2.47:Accessing Property Of One Managed Bean To Another In Request Scope js

    Use RequestMap instead of SessionMap.

    Having multiple and independent managed beans in the request scope for 1 request and the need to access the other bean is somewhat odd design however. You may need to rethink about it. For example, add one of the beans as property of the other bean.

  • RELEVANCY SCORE 2.47

    DB:2.47:Request: Fine-Grained Control Over Server Vs Client State Sa 1f



    I would like to to have a more fine grained control over what is saved on the client vs server, something like:

    @Scope(SESSION, state=server)

    DB:2.47:Request: Fine-Grained Control Over Server Vs Client State Sa 1f


    This comment refers to state saving of the *UI* state, not the model state.And, if you use the current CVS unreleased version of MyFaces, they have fixed a bug so that this is no longer a requirement.

  • RELEVANCY SCORE 2.47

    DB:2.47:Feature Request ds



    Is there any where that we can place feature request for future software upgrades?

    Cheers

    DB:2.47:Feature Request ds


    Send an email to bbsuggestions@rim.com

    That, and tell your carrier.






    1. If any post helps you please click the below the post(s) that helped you.2. Please resolve your thread by marking the post "Solution?" which solved it for you!3. Install free BlackBerry Protect today for backups of contacts and data.4. Guide to Unlocking your BlackBerry Unlock Codes

    Join our BBM Channels (Beta)BlackBerry Support Forums Channel PIN: C0001B7B4Display/Scan Bar CodeKnowledge Base UpdatesPIN: C0005A9AADisplay/Scan Bar Code

  • RELEVANCY SCORE 2.46

    DB:2.46:Droplet Request Scope ? ms


    Hi AllCan we define a droplet with Request Scope . If we define what is the impact of that ?What are the scenarios to declare Droplet with request scope ? Thanksuser8729783

    DB:2.46:Droplet Request Scope ? ms

    As far as the feasibility is concerned, yes you can. Droplet is nothing but a servlet which is also a nucleus component. Having it as request scoped means it will be instantiated for each request thread. There can be better alternative in terms of design that can be suggested based on what you are trying to do. BTW, you may want to take a loot at the configuration of an undocumented ATG droplet "UnionDroplet" from dyn/admin at /atg/dynamo/droplet/UnionDroplet or from inside DAS\config.jar

  • RELEVANCY SCORE 2.45

    DB:2.45:Ethernet Control Of Tektronix Scope k7


    I have a TDS7104 scope. TekVISA and VXIPNP drivers came along with the scope. I want to control the scope through a remote PC using the Ethernet port. The TekVISA programmers manual only gives how to control it using simple C programs. There are no examples on how to control thru Ethernet port using LabVIEW.Can anyone help me with an example or some guidelines.Thanx Regards,Srini.

    DB:2.45:Ethernet Control Of Tektronix Scope k7

    I installed the TekVISA in my PC. In LabVIEW tools menu, I selected Instrumentation and then Import CVI driver and selected the tktdsk7k.fp and the corressponding dll file. These files came along with the scope under the name VXIpnp drivers. Then, LabVIEW has made a lot of vi's from these files. I opened a new vi and pulled the intialize.vi and the close .vi to check whether it is communicating with the instrument. In the resource name of the intialize.vi, I gave TCPIP::::INSTR. I am getting the following error. Plz help me.Error code: -1073807343 Insufficient local info or the device or resource is not present in the systemI dont know whether this is the right method or not bcoz no manual speaks about this and I dont have any examples vi's also. Any example will be of much help.Thanx Regards,Srini.

  • RELEVANCY SCORE 2.45

    DB:2.45:Specifying Scope On Injection Point jj


    To be able to control scope on an individual injection point, is the preferred (and only?) solution to make a producer method for every anticipated scope? F ex:
    class MyBean {
    @Produces @ApplicationScoped @Binding1
    static public MyBean create1() {
    return new MyBean();
    }

    @Produces @RequestScoped @Binding2
    static public MyBean create2() {
    return new MyBean();
    }

    ...
    }

    class OtherClass {
    @Binding2
    MyBean bean; // = request scope
    }

    DB:2.45:Specifying Scope On Injection Point jj

    A producer method/field or a subclass. IMO, subclass is a more elegant solution much of the time.

  • RELEVANCY SCORE 2.44

    DB:2.44:Feature Request - @Inout xk



    Before making this an official JIRA request, I wanted to make sure that there wasn't already something out there that I missing.IMO, it would be great to have an InOut annotation that can combine In and Out to avoid excessive typing. Examples:Now:
    @In(required=false, value="someString", scope=ScopeType.EVENT)
    @Out(required=false, value="someString", scope=ScopeType.EVENT)
    private String localVariableName;

    DB:2.44:Feature Request - @Inout xk


    Maybe I'm being dense, but... if I read your post right, it sounds like you want your entity POJOs to be referenced through a JSF managed bean... so why not just make a stateful managed bean that has getters/setters for the entities?Something like:
    @Stateful
    @Scope ( ... )
    @Name ("myManagedBean")
    class MyManagedBean {
    private String text ;
    private User user ;

    public String getText () { return this.text ; }
    public void setText (String text) { this.text = text ; }
    public User getUser () { ... }
    public void setUser (User user) { ... }

    }

  • RELEVANCY SCORE 2.44

    DB:2.44:Default Search Scope 19


    hello,

    I created a search scope in the feature activated event of a feature receiver.
    Does anyone know how to set my new scope as a default scope of my site collection programaticaly?

    thanks

    DB:2.44:Default Search Scope 19

    Here you can find a powershell command to set your custom scope as default.
    http://www.sharepointdevwiki.com/display/public/Modifying+the+default+Search+Scope+for+a+Site+Collection+programmatically+using+PowerShell
    This powershell uses object model so you can convert the script into c# or whatever.--marco @avanade

  • RELEVANCY SCORE 2.44

    DB:2.44:Feature Request Reinvent Device Manager And Control Panel ak


    REINVENTING DEVICE MANAGER

    device manager is full of serious usability and presentation issues, it should really be designed from ground up.it is difficult to trace IRQ conficts if a device has negative IRQ value

    DB:2.44:Feature Request Reinvent Device Manager And Control Panel ak

    REINVENTING DEVICE MANAGER

    device manager is full of serious usability and presentation issues, it should really be designed from ground up.it is difficult to trace IRQ conficts if a device has negative IRQ value

  • RELEVANCY SCORE 2.43

    DB:2.43:Feature Request - Duplicate Option In Folder View 1c


    I know it has New from existing page option, but sometimes you just want to make an exact duplicate of a file, and change the name. Also, the title is not intuitive to me. I avoided it for a long time, and had to try it to see what it does. A better name would be Newpage from this...

    DB:2.43:Feature Request - Duplicate Option In Folder View 1c

    No need to copy/paste/rename you can simply open the page and use Save As for your new page.Free Expression Web Tutorials
    For an Expression Web forum with without the posting issues try
    expressionwebforum.com

  • RELEVANCY SCORE 2.43

    DB:2.43:Feature Request - More Than One Favourite 9d


    This is a feature request.Could the "Call Favourite" function not store more than one contact? Maybe fifteen favourites?You could make the Volume Up Down controls NOT control the volume while on that screen, and instead scroll through a list of multiple favourites.






    Solved!
    Go to Solution.

    DB:2.43:Feature Request - More Than One Favourite 9d


    Tnx! That's alsowhy I wanted the watch, and waterproof was an absolute must since I use it kayaking. For that purpose itworks very good. I do hope thy fix something that you can receive messages after you've been out of reach of the phone and can 'scroll' through different messages and messages itself (maybe via the volume button). Than I'll cal it perfect

  • RELEVANCY SCORE 2.43

    DB:2.43:An Unexpected Error Has Occurred After Site Import 91


    I imported the site to dev site on the dev forest using the following:
    Export-SPWeb http://portal01 -Path M:\Export\site_export.cmp
    and
    Import-SPWeb http://spdev -Path c:\export\site_export.cmp -UpdateVersions Overwrite
    Now when I try to open this site, I receive the following error:

    Not sure what to do about this. I checked logs and see the following errors:
    Name=Request (GET:http://spdev:80/Pages/HomePage.aspx)
    Constructed a new async cache named Profile Property Cache
    Leaving Monitored Scope (GetProcessSecurityTokenForServiceContext). Execution Time=651.676400212876
    Leaving Monitored Scope (CreateChannelAsProcess:Microsoft.Office.Server.UserProfiles.IProfilePropertyService). Execution Time=656.517518287939
    WcfSendRequest: RemoteAddress: 'http://spdev:32843/cc3824e1d68b48cd8df141dfcc07f698/ProfilePropertyService.svc' Channel: 'Microsoft.Office.Server.UserProfiles.IProfilePropertyService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties' MessageId: 'urn:uuid:ea3faf0b-cc00-4e06-b018-de24dd5716a4'
    WcfReceiveRequest: LocalAddress: 'http://spdev.dev.test:32843/cc3824e1d68b48cd8df141dfcc07f698/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties' MessageId: 'urn:uuid:ea3faf0b-cc00-4e06-b018-de24dd5716a4'
    Entering monitored scope (ExecuteWcfServerOperation)
    Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=55.968845202393
    Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=201.326704930375
    Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=1122.33174886752
    Failed to look up string with key FSAdmin_SiteSettings_UserContextManagement_ToolTip, keyfile Microsoft.Office.Server.Search.
    Localized resource for token 'FSAdmin_SiteSettings_UserContextManagement_ToolTip' could not be found for file with path: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\Features\SearchExtensions\ExtendedSearchAdminLinks.xml.
    Caching global content types for LCID 1033.
    Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=13355.7563880326
    Leaving Monitored Scope (GetWebPartPageContent). Execution Time=13356.2866230205
    Error initializing Safe control - Assembly:Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c TypeName: Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl Error: Could not load type 'Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl' from assembly 'Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
    SafeControl load exception:AjaxControlToolkit, Version=3.0.30930.28736, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e Exception: Request failed.
    SafeControl load exception:AjaxControlToolkit, Version=3.0.30930.28736, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e Exception: Request failed.
    Site=/
    Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=25159.6680583705
    Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=151.967358979982
    IPFS has just come up in AppDomain /LM/W3SVC/86096053/ROOT-1-129998062949148220
    Initializing Licensing API. This trace forces the initialization of ULS
    Constructing a Taxonomy cache.
    Creating a Taxonomy Term cache
    Creating a Taxonomy TermSet cache
    Creating a Taxonomy Group cache
    Taxonomy cache background thread is created
    End of the construction of the Taxonomy cache.
    WcfSendRequest: RemoteAddress: 'http://spdev:32843/7e1b7eabff9e4c9ba68bd23560d059c9/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetSessionData' MessageId: 'urn:uuid:c71fce75-a98d-4054-9805-ed38fb111f83'
    WcfReceiveRequest: LocalAddress: 'http://spdev.dev.test:32843/7e1b7eabff9e4c9ba68bd23560d059c9/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetSessionData' MessageId: 'urn:uuid:c71fce75-a98d-4054-9805-ed38fb111f83'
    Entering monitored scope (ExecuteWcfServerOperation)
    MetadataWebServiceApplication.GetSessionData called on 'Managed Metadata Service' starting.
    MetadataWebServiceApplication.GetSessionData called on 'Managed Metadata Service' completed.
    Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=1.85191134627446
    WcfSendRequest: RemoteAddress: 'http://spdev:32843/7e1b7eabff9e4c9ba68bd23560d059c9/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IMetadataWebServiceApplication/GetServiceSettings' MessageId: 'urn:uuid:7fd83741-aa8d-4581-be76-9975c122d15c'
    WcfReceiveRequest: LocalAddress: 'http://spdev.dev.test:32843/7e1b7eabff9e4c9ba68bd23560d059c9/MetadataWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IMetadataWebServiceApplication/GetServiceSettings' MessageId: 'urn:uuid:7fd83741-aa8d-4581-be76-9975c122d15c'
    Entering monitored scope (ExecuteWcfServerOperation)
    Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=2.56820350072425
    Caching global content types for LCID 0.
    No webtemp*.xml files found for language 1033 and product version 3.
    No webtemp*.xml files found for language 1033 and product version 2.
    Leaving Monitored Scope (EnsureListItemsData). Execution Time=1932.03437867103
    Setting [Display] as the FormContext.FormMode for the current page
    Initializing portal application domain '/LM/W3SVC/86096053/ROOT-1-129998062949148220'.
    Topology cache updated. (AppDomain: /LM/W3SVC/86096053/ROOT-1-129998062949148220)
    Initialized portal topology cache for application domain '/LM/W3SVC/86096053/ROOT-1-129998062949148220'
    Portal application domain '/LM/W3SVC/86096053/ROOT-1-129998062949148220' initialized.
    PortalSiteMapProvider initialized as Global, PerWeb, PerWeb, True, True
    PortalSiteMapProvider initialized as Combined, PerWeb, PerWeb, True, True
    PortalSiteMapProvider initialized as Current, PerWeb, PerWeb, True, True
    PortalSiteMapProvider initialized as Current, PerWeb, PerWeb, True, True
    PortalSiteMapProvider initialized as Combined, PerWeb, PerWeb, True, True
    PortalSiteMapProvider initialized as Current, PerWeb, PerWeb, True, True
    Constructing MySiteMapProvider
    Videntityinfo::isFreshToken reported failure.
    Object Cache: The super user account utilized by the cache is not configured. This can increase the number of cache misses, which causes the page requests to consume unneccesary system resources. To configure the account use the following command 'stsadm -o setproperty -propertyname portalsuperuseraccount -propertyvalue account -url webappurl'. The account should be any account that has Full Control access to the SharePoint databases but is not an application pool account. Additional Data: Current default super user account: SHAREPOINT\system
    Leaving Monitored Scope (CachedObjectFactory: Caching Web at: http://spdev). Execution Time=413.443328691216
    Leaving Monitored Scope (Web Part Page Title Bar). Execution Time=2029.42971802282
    Failed to find generic XML file at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\SiteTemplates\BLANKINTERNET\xml\stdview.xml, falling back to global site definition.
    Leaving Monitored Scope (News Announcements). Execution Time=118.559202356724
    Leaving Monitored Scope (RealSiteName Calendar). Execution Time=444.664894560622
    Leaving Monitored Scope (Add WebParts). Execution Time=2630.85755312477
    Leaving Monitored Scope (CachedList:Pages). Execution Time=31.476905584369
    Leaving Monitored Scope (Load CachedList:22b55e6e-9213-4b7b-8748-5d7fdbb9880f). Execution Time=292.762627652397
    Leaving Monitored Scope (EnsureListItemsData#2). Execution Time=166.96172278879
    Leaving Monitored Scope (EnsureListItemsData#3). Execution Time=2255.0597911187
    Failed to cache field with id {3356ce13-cbed-403c-b6f3-498b08cd0542}, overwrite=0
    Leaving Monitored Scope (EnsureListItemsData#4). Execution Time=3711.26050936641
    Leaving Monitored Scope (EnsureListItemsData#25). Execution Time=12.0196840659916
    Leaving Monitored Scope (EnsureListItemsData#26). Execution Time=131.326746835142
    Failed to cache field with id {3356ce13-cbed-403c-b6f3-498b08cd0542}, overwrite=0
    Leaving Monitored Scope (EnsureListItemsData#27). Execution Time=993.35585947376
    Leaving Monitored Scope (EnsureListItemsData#48). Execution Time=7.39172157355195
    Leaving Monitored Scope (EnsureListItemsData#49). Execution Time=136.432144308844
    Failed to cache field with id {3356ce13-cbed-403c-b6f3-498b08cd0542}, overwrite=0
    Leaving Monitored Scope (EnsureListItemsData#50). Execution Time=1141.33444334406
    System.Web.HttpException: Request timed out.
    Leaving Monitored Scope (Request (GET:http://spdev:80/Pages/HomePage.aspx)). Execution Time=112424.412879291
    Cansomeone help me with this?

    Thank you.

    Thank you. Eric.

    DB:2.43:An Unexpected Error Has Occurred After Site Import 91

    Yes, I can reach http://spdev/Pages/HomePage.aspx?contents=1
    It shows me parts that I have onthe page.
    What should I do?
    Thank you.

    Thank you. Eric.

  • RELEVANCY SCORE 2.43

    DB:2.43:Unlock Intuitive Control Buttons j7


    The buttons on the right side of my computer monitor are locked. I think these are called intuitive controls. How do I unlock these?

    DB:2.43:Unlock Intuitive Control Buttons j7

    Hi,
    I would suggest you to contact the manufacturer of the monitor and check if it helps.

    Hope it helps.

  • RELEVANCY SCORE 2.43

    DB:2.43:How Do You Manage Requestcenter In Your Organization? 3f



    How do you manage RequestCenter in your organization?

    We are involved in discussions/debate as to where RequestCenter/Request Management falls in the organization.

    Some feel that building services in RC constitutes development and thus should fall under the companies development organization and be managed as such (e.g. Code Management, Version Control, Code Migration Policies, Separation of Duties etc.). Others feel it is not development and fits in the engineering/operations side of the house and managed accordingly.

    We are currently managing RC/Request Management in our engineering/operations side of the house. Most of the team do not have “hard core” development backgrounds and are doing quite well with the product, although a little development knowledge does help.

    From the newScale website – “Active Form Components: For an actionable Service Catalog with streamlined request fulfillment, end users must be able to easily request services using an intuitive and interactive online form. With the new active form components feature, service designers can quickly create and update complex interactive form elements that can be re-used throughout the catalog without any programming required.”

    I would be interested to know how your company is managing your installation of RC in your organization.

    DB:2.43:How Do You Manage Requestcenter In Your Organization? 3f


    I see RC as falling in the operations side of the organization, and that's how we'll likely develop support for the service.  We're new to implementing the product, so I can't give any advice on past experience, just my vision for the product and how we might develop and roll services out to the organization.

  • RELEVANCY SCORE 2.43

    DB:2.43:Rich:Datascroller 91



    hi.. i try to use datascroller with request scope and its not working, just in session scope.. when in request scope i try to click on datascroller for paging the bean return with list=null ..how can i work with datasroller in request scope..??is it possible??

    DB:2.43:Rich:Datascroller 91


    Hi.I tried to do this.

    a:keepAlive beanName="searchProeveManager"/a:keepAlive

  • RELEVANCY SCORE 2.43

    DB:2.43:Can Integration With Adobe Bridge Be Added To The Next Update To Making Placing Files More Intuitive za



    Running Windows 7. I just thought it would be neat if that feature was added. Thanks!

  • RELEVANCY SCORE 2.43

    DB:2.43:Feature Element Scope z7


    Hi, I want to know the scope of the feature elements. I am googling a lot on it.But didnt find any usefull article on it.I know the Scope of a certain feature but want to know in more details Let me know if i am not clearSharepoint rocks !!!!

    DB:2.43:Feature Element Scope z7

    Thanx Tanmay and Ravi :)Sharepoint rocks !!!!

  • RELEVANCY SCORE 2.43

    DB:2.43:Feature Request - Remote Control Permission Console User-Based z8



    Under now policy we now forced to use the remote control permission setting on our workstation agents. To me it never made sense for this setting to be set at the agent level. This setting should be set at the console user scope level in my opinion. It you could exclude certain console users roles from having to request permission from the end-user to remote into their machine. I'm sure there are others who would like to see this feature, feel free to chime in.

    DB:2.43:Feature Request - Remote Control Permission Console User-Based z8


    Mark,

    I would post this as an ER - http://community.landesk.com/support/community/enhancementrequests/ldms

  • RELEVANCY SCORE 2.43

    DB:2.43:Feature Request, Where To Submit m1


    Where on the Documentum site can one submit a feature request?

  • RELEVANCY SCORE 2.42

    DB:2.42:Event Handler Feature Scope xj


    Hi All ,
     
    I have a feature event handler  ,
     
     

    Code Snippet

    DB:2.42:Event Handler Feature Scope xj

    -- Remove DLL in GAC, and feature folder in ..\12\TEMPLATE\FEATURES.-- IISReset-- Redeploy your feature with Web scope.Hope it will help you

  • RELEVANCY SCORE 2.42

    DB:2.42:Arranging Items In The @Contextmenu? 7p



    Unfortunately there is no way to control the order. The ContextMenu attribute does not have validation and ordering options like MenuItem. Time for a feature request?

    DB:2.42:Arranging Items In The @Contextmenu? 7p


    Unfortunately there is no way to control the order. The ContextMenu attribute does not have validation and ordering options like MenuItem. Time for a feature request?

  • RELEVANCY SCORE 2.42

    DB:2.42:Diff. Between Page And Request Scope sf


    what is the difference between page scope and request scope.

    DB:2.42:Diff. Between Page And Request Scope sf

    page - You can use the bean within the JSP page with the jsp:useBean element or any of the page's static include files, until the page sends a response back to the client or forwards a request to another resource.

    request - You can use the bean from any JSP page processing the same request, until a JSP page sends a response to the client or forwards the request to another resource. You can use the request object to access the bean, for example, request.getAttribute(beanInstanceName).

  • RELEVANCY SCORE 2.42

    DB:2.42:Feature Request jf


    Show usergroup column in User and Guests tab.

    DB:2.42:Feature Request jf

    Show usergroup column in User and Guests tab.

  • RELEVANCY SCORE 2.42

    DB:2.42:Struts Forms 79


    hi all,
    can i know the difference between:
    scope="request",
    scope="pagecontext",
    scope="session"
    in jsp.

    DB:2.42:Struts Forms 79

    Come on in it is self explanatory...
    If the attribute/ActionForm bean instance/Bean instance you are trying to save under the scope of session you put scope="session" and same is the case with scope with saving under the scope of request and in defined page....
    Hope tht clears your question..

    else where i'd advice you to read
    http://java.sun.com/products/jsp/docs.html

  • RELEVANCY SCORE 2.42

    DB:2.42:Faces Managed Bean - Session Scope Or Request Scope??? xj


    Hi to all,

    I have been developing jsf for around 3 months. There are 2 project that i involved in.

    And 1 of the project used session scope for most of the bean, while another 1 used request scope.

    I found that using session scope do help developer to reduce coding effort compared to request scope bean. But i personally strongly feel that using session scope is not appropriate cause it will add oevrhead to the server.

    While using request scope, developer used more efffort on coding because bean value is loss after request is been processed. Developers need to explicitly used hidden fields or other way to keep track of the bean value.

    So my question is should we used request scope or session scope for page / managed bean??? And Why??

    And What scope are u using for ur bean.

    thanks in advance..

    DB:2.42:Faces Managed Bean - Session Scope Or Request Scope??? xj

    ok...

    thanks eddylst....

    I actually also share the same though with both of u....

    just wanna to hear more opinion...

  • RELEVANCY SCORE 2.42

    DB:2.42:System Feature Request mk


    Changing the location of media drives ought to be more intuitive than it currently is. It should be something that can be accomplished in app, but if leaving it in the setup utility is the preferred way, ok. However, removing undesired locations by entering a text document of code and inserting hash marks before the code associated with the given location provides more intimidation than is necessary and should be updated to a gui like most operations in today's software.Erich HobergiEdit Creative2x2.4 Ghz24 GB Ram10.8

    DB:2.42:System Feature Request mk

    How about a drag and drop dual window... Active storage/inactive storage. You can add a path to either window but can only delete from the inactive window. This lets you define lots of paths for say a mobile smoke and to selectively temporarily omit a drive from startup selection. Accidental deletion would be avoided as its a two step process, drag to inactive - then choose delete confirm.



    All's well that ends. That's why its called finishing.

  • RELEVANCY SCORE 2.42

    DB:2.42:Flash White List Feature Request xm


    Can a control panel or in app IE option/setting be made so that the users can add to the Flash
    white list without editing a hidden file under the users profile. Like trust sites list in IE settings a

    DB:2.42:Flash White List Feature Request xm

    Yes, the white list needs to be adjustable by the user. I find it very annoying getting kicked off web sites because they can't access Flash.

    Bye.

  • RELEVANCY SCORE 2.42

    DB:2.42:Bean With Request Scope 8x


    in the jsp file I have a bean

    jsp:useBean id="doclist" type="com.att.rap.platform.util.doclistBean" scope="request"/

    the object - doclist I am able to use.
    but :
    doclist.getDocs() method returns null,
    which returns all docs from servlet.

    if i use scope as session, it works. but i need request scope for this..please help

    thanks

    DB:2.42:Bean With Request Scope 8x

    Hi nishalex,

    1. Since you don't want session, then
    you can do this: (pass the parameter using a query string)

    String schURL ="/jsp/index.jsp?displayPage=disp.jsp" ;
    schURL +="?fname=John" ;
    schURL +="lname=Smith" ;
    schURL +="address=Home" ;
    RequestDispatcher rs = req.getRequestDispatcher(schURL);
    rs.forward(req,res);

    2. in your disp.jsp

    n jsp file

    %
    // get the data from the servlet
    String fname= request.getParameter("fname");
    String lname= request.getParameter("lname");
    String address= request.getParameter("address");
    %

    --Paul.

  • RELEVANCY SCORE 2.41

    DB:2.41:Sharepoint 2010 Value Cannot Be Null.Parameter Name: Ribbon kp


    Hi,
    I have customized Master page in SharePoint 2010 getting Value cannot be null.Parameter name: ribbon
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:

    [ArgumentNullException: Value cannot be null.
    Parameter name: ribbon]
    Microsoft.SharePoint.WebControls.RibbonTrimmer..ctor(SPRibbon ribbon) 21232454
    Microsoft.SharePoint.WebControls.SPPageStateControl.OnInit(EventArgs e) 288
    System.Web.UI.Control.InitRecursive(Control namingContainer) 143
    System.Web.UI.Control.AddedControl(Control control, Int32 index) 271
    Microsoft.SharePoint.WebPartPages.WikiEditPage.OnLoad(EventArgs e) 274
    System.Web.UI.Control.LoadRecursive() 66
    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2428

    Checked ULS log file:
    Error initializing Safe control - Assembly:Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c TypeName: Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl Error:
    Could not load type 'Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl' from assembly 'Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:42.69 w3wp.exe (0x1228) 0x1310SharePoint Foundation
    Logging Correlation Data xmnvMedium Site=/f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:42.69 w3wp.exe (0x1228) 0x1310SharePoint Foundation
    Monitoring b4lyHigh Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=12983.9929304002f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:42.71 OWSTIMER.EXE (0x04F8) 0x137CSharePoint Foundation Monitoring
    nasqMedium Entering monitored scope (Timer Job job-doc-transforms)63aeb1cd-e07b-44cc-8b42-20a7a220acf5
    04/04/2011 09:47:42.74 w3wp.exe (0x1228) 0x1310InfoPath Forms Services
    Runtime 939kMedium IPFS has just come up in AppDomain /LM/W3SVC/666473712/ROOT-1-129464092461501381f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:43.05 OWSTIMER.EXE (0x04F8) 0x137CSharePoint Foundation Monitoring
    b4lyMedium Leaving Monitored Scope (Timer Job job-doc-transforms). Execution Time=337.38645030688463aeb1cd-e07b-44cc-8b42-20a7a220acf5
    04/04/2011 09:47:44.14 w3wp.exe (0x1228) 0x1310SharePoint Foundation
    General 8e1fHigh XML Document failed to parse, file '14\Template\Features\CustomMasterPage\feature.xml',
    line 1, character 31: System.Xml.XmlException: System does not support 'utf-8?' encoding. Line 1, position 31. at System.Xml.XmlTextReaderImpl.Throw(Exception e) at System.Xml.XmlTextReaderImpl.CheckEncoding(String
    newEncodingName) at System.Xml.XmlTextReaderImpl.ParseXmlDeclaration(Boolean isTextDecl) at System.Xml.XmlTextReaderImpl.Read() at System.Xml.XmlLoader.Load(XmlDocument doc, XmlReader
    reader, Boolean preserveWhitespace) at System.Xml.XmlDocument.Load(XmlReader reader) at System.Xml.XmlDocument.Load(Stream inStream) at Microsoft.SharePoint.SPXmlDocCache.GetGlobalXmlDocumentFullPath(String
    pathAbsolute, SPFeatureDefinition featdef, XmlDocument xdRetrieved, Int32...f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:44.14*w3wp.exe (0x1228) 0x1310SharePoint Foundation
    General 8e1fHigh ... sizeOfInBytesRetrieved) at Microsoft.SharePoint.SPXmlDocCache.GetGlobalXmlDocument(String
    pathTemplateRelativeXml, SPFeatureDefinition featdef)f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:44.14 w3wp.exe (0x1228) 0x1310SharePoint Foundation
    Feature Infrastructure fs74Medium Feature definition missing for Feature 'CustomMasterPage' (Id: '6ff76838-ec85-4623-ae9b-17c5318c3f8a')f19d37b5-2d72-4645-a6f6-1c053d9222cd
    04/04/2011 09:47:44.45 w3wp.exe (0x1228) 0x1310SharePoint Server
    Setup and Upgrade ajt5High Initializing Licensing API. This trace forces the initialization of ULSf19d37b5-2d72-4645-a6f6-1c053d9222cd
    Any help is appreciated.

    DB:2.41:Sharepoint 2010 Value Cannot Be Null.Parameter Name: Ribbon kp

    So it looks like you customized something you shouldnt have - Its not totally uncommon in masterpage customizations. Go back to the ootb master and slowly add your customizations until you find whats causing the error.

  • RELEVANCY SCORE 2.41

    DB:2.41:Merging: Not Intuitive pa


    Hello there,I have this minor problem using the merge feature in Team System Source Control: I think it's unintuitive ;) When doing a merge, I always click "Merge..." on the branch which I want to update, not the source branch. But in the "Merge..." dialog, the clicked-on branch is now selected as the source path, not as the target path.Is there a possibility to change this behaviour, so that I get a list of possible source paths for a specific target path instead of the other way around?This is also a little bit of a work flow question: At our company, teams pull the changes from other teams, the changes do not get pushed. Right now, the "Merge" feature tends to favor push scenarios :)Best regards,Martin

    DB:2.41:Merging: Not Intuitive pa

    I see what you mean.  Makes a lot more sense when you consider both RI FI into a selected target.  Branch/merge administration is on the short list of areas to improve in vNext.

  • RELEVANCY SCORE 2.41

    DB:2.41:How Do I Remove Encryption From My Sts Response pp


    div  protected override Scope GetScope( IClaimsPrincipal principal, RequestSecurityToken request )/divdiv        {/divdiv            Scope scope = new Scope( request );/divdiv            scope.SigningCredentials = this.SecurityTokenServiceConfiguration.SigningCredentials;/divdiv         /divdiv            scope.EncryptingCredentials = new X509EncryptingCredentials( RPCert );/divdiv            /divdiv            return scope;/divdiv        }/divdiv/div 

  • RELEVANCY SCORE 2.41

    DB:2.41:Space Pilot Intuitive Control 1a


    This seems like a pretty neat tool for 3D apps. Click on the link.PDF File on Space Pilot



    3ds Max 6.5 - Max 2014Windows 8 Intel Core 2 Quad Q9400 2.13 GHZ64-Bit, 8 GB RAMFacebook: https://www.facebook.com/DM.3D.ArtistWebsite: http://dustinmoore.us

    DB:2.41:Space Pilot Intuitive Control 1a

    This seems like a pretty neat tool for 3D apps. Click on the link.PDF File on Space Pilot



    3ds Max 6.5 - Max 2014Windows 8 Intel Core 2 Quad Q9400 2.13 GHZ64-Bit, 8 GB RAMFacebook: https://www.facebook.com/DM.3D.ArtistWebsite: http://dustinmoore.us

  • RELEVANCY SCORE 2.41

    DB:2.41:Request Scope? js


    There are four kinds of scopes:page,request,session,and application.
    I am a little puzzled at the request scope.
    please explain what is a request scope,and give an example.
    Thanks.

    DB:2.41:Request Scope? js

    go back to your other post:
    http://forum.java.sun.com/thread.jsp?forum=45thread=482726tstart=0trange=15

  • RELEVANCY SCORE 2.41

    DB:2.41:Sandbox Solution - Error Occurred In Deployment Step Add Solution: Sandboxed Code Execution Request Failed. 87


    Hello
    I have sandbox solution and site scope feature. There is nothing in feature.
    When I deploy this sandbox solution, it works fine.
    I add feature activation event. Default all code is commented. Then I deploy, it give below error
    Error occurred in deployment step 'Add Solution': Sandboxed code execution request failed.

    I checked with other develoers system, they able to deploy the solution without error.
    What fix I need to make on my system?

    Thank you, in advance.

    Shailendra Shelar

  • RELEVANCY SCORE 2.41

    DB:2.41:[Feature Request] - Control Coordinates fk


    Hi Everyone,
    As far as I know this isn't possible, so I would get to request a command to be able to get control position (x y).
    Something like: Control.GetX, Control.GetY.
    Regards,
    Kirk.

    DB:2.41:[Feature Request] - Control Coordinates fk

    You can use shapes object to merge Controls.
    Here is some results from my logging:
    When you use Shapes.Move it adds position of shape (or control) in Array called position map (List of points indexed by shapes).
    Shapes.GetLeft gets X position of the shape from position map(default value is 0).
    When you use Controls.AddButton(Content,X,Y) it does not add position of the shape in position map(So the point in positon map is 0,0).
    That is the bug.
    Sorry My Bad English

  • RELEVANCY SCORE 2.40

    DB:2.40:Attribute Of Setting Value In Request Scope mj


    is there any adf faces tag which is used to set the value in request scope ?

    DB:2.40:Attribute Of Setting Value In Request Scope mj

    Yes, you can use [url | http://jdevadf.oracle.com/adf-richclient-demo/docs/tagdoc/af_setPropertyListener.html]af:setPropertyListener or af:setActionListener depending on when you want to set the value.

    Sireesha

  • RELEVANCY SCORE 2.40

    DB:2.40:Call Session Scope Bean Setter From A Request Scope Bean ? xm


    Is it possible to call a session scope bean setter method from within a request scope bean method? If so, how? What are the steps?

    If not, what is the preferred way to move data from within a request scope bean to a session scope bean? (I am working with the binding container in the request scope bean, but want to save some data to a session scope bean. As I understand it, the session scope bean does not have access to the binding container.)

    thanks, Ken

    DB:2.40:Call Session Scope Bean Setter From A Request Scope Bean ? xm

    Say the name of your session-scoped bean is foo. Put #{foo} for the value. Make sure that your request-scoped bean has a getter and setter for the managed property (of the type of your session-scoped bean)

    John

  • RELEVANCY SCORE 2.40

    DB:2.40:Feature Query: Jsf -≫ Uix 'Value Binding' js


    I was reading an interview on TheServerSide and came across this description of a feature in JSF:

    "You can associate components with properties of any Java class via value binding expressions, which are a subset of the expression language introduced with JSTL. By using value binding expressions, you can associate a component's value (say an input control), directly with any property in any application scope (application, session, or request). This association is read/write; for input controls, JSF will automatically update the property as well." (http://www.theserverside.com/talks/videos/KitoMannText/interview.jsp)

    This makes it sound like I would no longer have to read the parameters off of a request or PageEvent and set the properties of my server-side classes myself -- similar to what Struts does with ActionForms. This is something that I miss in straight UIX that is there in JSP/Struts. Will this new read/write value binding be available in the initial 'UIX as JSF' implementation?

  • RELEVANCY SCORE 2.40

    DB:2.40:Feature Request - Volume Control For Windows Mobile 8 Skype Client 3c



    I have just come from an Android phone to Windows Mobile 8 to give it a try as the Android version is very unstable and I was sick of it (Yes Microsoft your tactics do work sometimes )BUT.........

    I am very shocked to find there is no Volume Control for the Windows Mobile 8 Skype Client

    Is this something which could be added? surely it is needed and I think there is a huge demand for this feature?!

    DB:2.40:Feature Request - Volume Control For Windows Mobile 8 Skype Client 3c


    same problem on lumia 920. There is mute for mic but no control for speaker volume. The phone volume control makes no change to the speaker volume that i can notice. I can mute so that the other person can not hear me but I can not turn off or even lower their volume. so i get shouting or a whisper from them and no control at all over how lout or quiet they sound!

  • RELEVANCY SCORE 2.40

    DB:2.40:Custom Delegate Control Not Working z3


    I have created a custom delegate control for AdditionalPageHead, the feature and element file for the same are below
    ?xml version=1.0 encoding=utf-8 ?
    Feature xmlns=http://schemas.microsoft.com/sharepoint/
    Id=087413D1-9EED-4d32-94BF-4F6D25E4E536
    Title=AdditionalPageHead Control
    Description=AdditionalPageHead Control
    Scope=Site
    Hidden=FALSE
    ElementManifests
    ElementManifest Location=elements.xml/
    /ElementManifests
    /Feature
    ?xml version=1.0 encoding=utf-8 ?
    Elements xmlns=http://schemas.microsoft.com/sharepoint/
    Control Id=AdditionalPageHead Sequence=10
    ControlClass=PageHeadControl.PageHeadControl
    ControlAssembly=PageHeadControl, Version=1.0.0.0, Culture=neutral,
    PublicKeyToken=552fbbc8ccf11a30 /
    /Elements

    The feature is getting installed and activated but i cant see my control working. I tried to debug but my code is not getting called can anyone help me find if I am doing anything wrong??? Thanks in advance

    DB:2.40:Custom Delegate Control Not Working z3

    Try to put it in your own delegate control tag first rather than the AdditionalPageHead one - this will let you know if you control is being found and behaving as you would expect. If it is working there then the problem has to be with the AdditionalPageHead bit - if you are using custom master pages then it might be worth double checking to make sure that the delegate control is still in the page there.Brian Farnhill
    MCAD | MCTS
    blog.brianfarnhill.com
    Canberra SharePoint User Group

  • RELEVANCY SCORE 2.40

    DB:2.40:Remote Control App Features Requests fd



    This is my feature request about Remote Control app:

    - better looking (buttons graphics like standard keyboard for example)

    - more configurable layout (es. button text, position, ...)

    - allow modify of a preset layout to create a new one

    DB:2.40:Remote Control App Features Requests fd


    Good topic. I echo your requests too.

    I would also like to see an option to place macros on the first page of the small windowed app since that's where I have my all on and all off buttons.

    It would also be good to customise the layout of that small app too.

  • RELEVANCY SCORE 2.40

    DB:2.40:[Feature Request] Duplicate Tab In Tab Dropdown 7m



    I know now that you can duplicate a tab by Control-clicking or middle-mouse-buttoning the Reload button, or by Control-dragging the tab over. But what would have been most intuitive is if there were an option to do this in the tab dropdown. I'm more of a person to do things long-hand, and I imagine many others are, too. Just want Firefox to be great.

    Thank you!

    Sincerely,
    N

    DB:2.40:[Feature Request] Duplicate Tab In Tab Dropdown 7m

    Question owner


    cor-el said

    You can look at this extension:
    duplicateTab: https://addons.mozilla.org/firefox/addon/duplicatetab/

    Thanks!

  • RELEVANCY SCORE 2.40

    DB:2.40:Have Same Master Page But Need To Point To Different Search Scope 7s


    Hello, I have 5 site collections that all use the same master page. They are all also using a custom search that I installed as a feature. The problem is I want one of the site collections to use a different search scope. I would rather not use another master page for that site. Is there a way I can make that one site use a different custom search scope? Maybe if it's this site use one delegate control all others use a different delegate control? Thanks.

    DB:2.40:Have Same Master Page But Need To Point To Different Search Scope 7s

    Hello, I have 5 site collections that all use the same master page. They are all also using a custom search that I installed as a feature. The problem is I want one of the site collections to use a different search scope. I would rather not use another master page for that site. Is there a way I can make that one site use a different custom search scope? Maybe if it's this site use one delegate control all others use a different delegate control? Thanks.

  • RELEVANCY SCORE 2.40

    DB:2.40:Feature Request 3z


    Can anyone explain how to submit a formal feature request to Documentum?thanks

    DB:2.40:Feature Request 3z

    Just open a support case and write feature request in the subject line.Then explain your request in the details box.There's no special feature request form.Regards Dominik

  • RELEVANCY SCORE 2.39

    DB:2.39:Remote Assistance Request In Win 7 31


    I want to setup the remote assistance feature my helpdesk person.
    Is there any way/GPO to auto accept the request and take control the request for Help Desk.
    Without any user interventionSubs

    DB:2.39:Remote Assistance Request In Win 7 31

    Hi,
    I created the batch file tried to run it, it gives error as could not connect. I am able to connect to other machine with manual intervention.
    Do we need to make any changes to Group Policy and or Firewall? Could you provide me detail steps.

  • RELEVANCY SCORE 2.39

    DB:2.39:Feature Request? d1



    Where do we go to suggest feature requests?

    DB:2.39:Feature Request? d1


    Hi Michael,

    Thank you for bringing this concern to us.

    If you want to suggest feature requests in CCW, please reach out to your Partner Account Manager, Experience Advisor or Experience Manager, and they will be the one to raise your concerns with Cisco, as there is no direct alias/email for the partners at this time.

    I hope this answers your question.

    Thanks and Best Regards,

    Jen C.

    CCW Support Team

  • RELEVANCY SCORE 2.39

    DB:2.39:Vpn 3030- Dhcp Network Scope Option jx



    Has anyone been successful in getting the DHCP Scope option to work? This is a new feature of version 4.0.1

    DB:2.39:Vpn 3030- Dhcp Network Scope Option jx


    I tested this in my lab and it worked fine, and I'm assuming the developers tested it also (at least I hope they did :-) )

    Make sure you enter an IP address in this field that is in the network of the scope, but not in the scope itself, other than that there really shouldn't be anything to do. For example, if the scope is 192.168.1.100 - 192.168.1.200, then enter 192.168.1.1 into the field under the Group properties.

    The concentrator puts this address in the giaddr field of the DHCP request packet, and then the server should assign an address from this network scope.

    Actually I just looked at the help file and it tells you to put a subnet into this field, but I believe that's wrong. Try what I suggested and if it works let me know and I'll look into getting the Help file changed.

  • RELEVANCY SCORE 2.39

    DB:2.39:Re: "Can't Set Managed Bean Property" When Leaving/Reloading The Page ..?? 79


    I don't have any missing setter/getter methods.

    In fact the only way I found to avoid that problem, is to not use the managed-property feature, check in the bean constructor for any userid in the requestparameters and then set the bean property.

    I'm asking myself if all managed-bean defined with scope = request are instancied at each request even if there is no reference to that bean in the JSF/JSP page.
    If not the case, is the page reloaded without the request parameters when leaving ?

    Thx.

    DB:2.39:Re: "Can't Set Managed Bean Property" When Leaving/Reloading The Page ..?? 79

    I don't know what can it be.

    I only have on suggestion to make to you, to see if you find where the error is.

    Build 3 pages. One that acts like login, a middle page where you can logut and the third one that is the result of logout. Next you star, step by step to add your functionalities to the point that an error starts to occur...

    Then you will know where the problem is.

  • RELEVANCY SCORE 2.39

    DB:2.39:Ni-Scope Soft Front Panel 9x



    Hej!

    Plz, anyone with codes (Block Diagram) used in NI-SCOPE Soft front Panel?

    Thanks

    DB:2.39:Ni-Scope Soft Front Panel 9x


    Hello Koye88,

    From your post, it looks like you are looking for example VIs whose block diagram code allows you to perform functions similar to the NI-Scope Soft Front Panel. Is this understanding correct?

    The NI-Scope Soft Front Panel uses the capabalities of the NI-SCOPE driver API to in a pre-built interface. This means the lower level VIs that ship with the NI-Scope driver can be used to build similar VIs of your own.Please find the steps below to find NI-Scope examples.

    If you do NOT have NI-Scope installed, click on this link to download and install the latest version. Otherwise, go to www.ni.com/support to find earlier versions.

    Once it is installed:
    Go to 'Start'-'All Programs'-'National Instruments'-'NI-Scope'-'Examples'-'LabVIEW 8.6'Search through folder for examples that perform various NI-Scope functionsOpen the file 'niScope VI Tree.vi' to learn more about the VIs that have just been installed

    If you require more information, please reply back with the exact function you would like to perform, as well as:

    The Operating System you are working withThe Digitizer board you are usingThe version of LabVIEW you have installed

    Regards,




    George T.Applications Engineering SpecialistNational Instruments UK and Ireland

  • RELEVANCY SCORE 2.39

    DB:2.39:Feature Request To Facilitate Fan Control xf


    I normally use the Custom curve method of setting fan curve. With four fans, this gets a bit tedious when tweaking or setting the system.

  • RELEVANCY SCORE 2.39

    DB:2.39:Scope Dropping Gpib Connection 33



    Hi

    I am having a problem while reading from a Tek 7K scope using GPIB connection. A short overview of my setup and my Labview code. I am running a Labview VI to read the output from a Tek 7K scope. The interface is a GPIB interface. I modified the VI that i downloaded from the NI website for the scope. So i have the VI to read 2 single waveforms in a while loop from the 2 channels on the scope (runs until num of acq equals the user's request). There is also an Agilent signal generator that is connected on a USB interface, and the VI is used to control the output of the signal generator.

    The problem i am facing is that, during the scope acquisitions the scope looses GBIP connection for no apparent reason. There is no error message. When i open up the Measurement and Automation tool to analyze the problem, i notice that the scope is visible on the GPIB list of interfaces, but it has stopped responding to IDN? queries or any other commands actually. The GPIB connection is only restored if i power cycle the scope. But even in this state, the scope's functioning has not stopped. It is still reading on the 2 channels. Only the GPIB response is lost. This loss in connection seems random. Has anyone faced a similar problem, or know what i could try to eliminate this? Any help would be deeply appreciated.

    Thanks

    DB:2.39:Scope Dropping Gpib Connection 33


    Hi Lablab123

    I used Google translate in order to understand what you have posted. If you need help in French please post it on the French forum it would be easier.

    Do you have any NI hardware connected or simulated in your computer? Can you see the device in MAX?

    Regards

    Esteban R.

  • RELEVANCY SCORE 2.39

    DB:2.39:Feature Request 81



    Filter. SSID's from site survey scan list

    DB:2.39:Feature Request 81


    Yeah - columns used to be sortable long ago. This disappeared in v5.3.x somewhere, and never came back...

    Jim




    "Excuse me, but I actually am a Rocket Scientist, and you, sir, are full of sh!t."

  • RELEVANCY SCORE 2.39

    DB:2.39:Bug: Found A Way To List All Users' Starred Tracks mf



    I have found a way to list a user's starred tracks, even if the user has chosen not to publish that list. I guess that is a privacy problem/bug.

    I don't want to post how to do it here, just wondered who should know so it can be fixed...?




    SpotCommander - The most elegant, intuitive, feature-rich universal remote control for Spotify, exclusive for Linux users!

    DB:2.39:Bug: Found A Way To List All Users' Starred Tracks mf


    Thanks for your answer. Form submitted.




    SpotCommander - The most elegant, intuitive, feature-rich universal remote control for Spotify, exclusive for Linux users!

  • RELEVANCY SCORE 2.39

    DB:2.39:Request Scope Vs Session Scope zk


    Hi all,

    I don't understand why I can't retrieve data that I put in request scope in one page and trying to display it on another page (using session scope works fine).

    Ex:

    page1.jsp
    %@taglib prefix="c" uri="http://java.sun.com/jstl/core" %
    c:set var="myid" value="123" scope="request" /

    page2.jsp
    %@taglib prefix="c" uri="http://java.sun.com/jstl/core" %
    Display: c:out value="${myid}" /

    Many thanks
    Erik

    DB:2.39:Request Scope Vs Session Scope zk

    Hi,

    thanks for your in depth explanation. Much appreciated!!!

    Erik

  • RELEVANCY SCORE 2.39

    DB:2.39:Tfs 2010 - Source Control - Feature Request zz


    Hi there,
    I have been using Visual Source Safe for some 10 years now and it had a very nice feature when doing a Get Latest Version i could get to a different folder (there was a browse button).
    With TFS 2010 Source Control this is not possible, i can only get to the mapped folder.
    Can this feature be included in future releases? Any reason for not already having this feature with TFS 2010 Source Control?

    Regards,
    Sanjeev.

    DB:2.39:Tfs 2010 - Source Control - Feature Request zz

    In TFS you have the concept of a workspace. You can have multiple workspaces on the same machine, making it possible to switch active workspace /destination folder.
    A workspace keeps track of whitch files and fileversions you have on your local client and is central to TFS.
    If I would guess I wouldnt expect this feature to be included in any feature releases, but if you want to, I suggest you file a suggestion at http://connect.microsoft.com

  • RELEVANCY SCORE 2.38

    DB:2.38:Applying Formatting To Headers And Reordering Config [Bpc 10 Nw] ck



    Hi,

    I'm just seeking confirmation that the below points are 100% not possible in BPC 10 before raising a product bug / feature request.

    Can you;

    Scope headers (values between the EPMOlapMember / RowKeyRange in 7.5) and the Data for criteria to apply specific formatting, e.g. Borders, BoldReorder formatting config on specific dimesion members or properties (I can only see 'Remove' - Can you not edit or re-order?)

    Many Thanks,

    Nick

    DB:2.38:Applying Formatting To Headers And Reordering Config [Bpc 10 Nw] ck


    Hi Nick,

    Your 2nd point is correct. We cannot edit or reorder the them.

    I am not quite clear with your 1st point.

  • RELEVANCY SCORE 2.38

    DB:2.38:Jira: Multiple @Roles Feature Request (64) 9z



    While issuing a new Feature Request about the Internationalization of Validation Messages I found this feature posted by Gavin King. I find it very important that it be implemented.
    Currently, a component class cannot be multiple components.If we introduce this:@Roles({@Role(name="currentUser", scope=SESSION), @Role(name="user", scope=CONVERSATION)})Then that problem would be fixed.This is a very serious limitation to JBoss Seam. EJBs should be reusable components, if they area stuck to only one context in Seam, there reusability would be affected. Another question: What if I would like to use my components outside of seam? Do I have to modify the code and strip them of all Seam annotations? (I fear that the answer is yes).

    DB:2.38:Jira: Multiple @Roles Feature Request (64) 9z


    Jacob and I continue to disagree on this issue. As long as there are a "small" number of roles (2, perhaps 3), I don't see any problem at all with @Role.

  • RELEVANCY SCORE 2.38

    DB:2.38:Feature Request Ui Builder: More Use Of Ctrl + ... Similar To Labview x1



    Would like to see more use of the Control + Key for common features that are in LabVIEW. Run for example is Ctrl + R

    DB:2.38:Feature Request Ui Builder: More Use Of Ctrl + ... Similar To Labview x1


    Would like to see more use of the Control + Key for common features that are in LabVIEW. Run for example is Ctrl + R

  • RELEVANCY SCORE 2.38

    DB:2.38:Thread: Request Remote Control 1a


    Is there a way for a user to request a remote control session, without

    right-clicking on the remote control Icon and choosing request remote

    control?

    I want to enable the feature without showing the icon in the systray.

    The other option would be to show the icon in the systray, but disable

    the ability to exit the program

    Any ideas of how to create a NAL app for this?

    I have to think it is a simple DLL hook, but I don\'t know for sure

    I put in a request a while back, but never heard from Novell.

    DB:2.38:Thread: Request Remote Control 1a

    Jason,

    It appears that in the past few days you have not received a response to your

    posting. That concerns us, and has triggered this automated reply.

    Has your problem been resolved? If not, you might try one of the following options:

    - Visit http://support.novell.com and search the knowledgebase and/or check all

    the other self support options and support programs available.

    - You could also try posting your message again. Make sure it is posted in the

    correct newsgroup. (http://support.novell.com/forums)

    Be sure to read the forum FAQ about what to expect in the way of responses:

    http://support.novell.com/forums/faq_general.html

    If this is a reply to a duplicate posting, please ignore and accept our apologies

    and rest assured we will issue a stern reprimand to our posting bot.

    Good luck!

    Your Novell Product Support Forums Team

    http://support.novell.com/forums/

  • RELEVANCY SCORE 2.38

    DB:2.38:**Feature Request** - Control Of Site Comms And Icmp Alerts 9f



    It would be very beneficial to have the ability to set warning and critical thresholds for both Site Communications Up/Down and ICMP Monitors.

  • RELEVANCY SCORE 2.38

    DB:2.38:Possible To Disable Widow Orphan Control In Ipad Pages? ac


    Is it possible to disable widow and orphan control in ipad Pages? If not, how can I submit a feedback request for this feature to be added?

    DB:2.38:Possible To Disable Widow Orphan Control In Ipad Pages? ac

    Is it possible to disable widow and orphan control in ipad Pages? If not, how can I submit a feedback request for this feature to be added?

  • RELEVANCY SCORE 2.38

    DB:2.38:History.Go(-1) To Form Page 3f


    I have a form page and when I use history.go(-1) (or fx back button) I get a refresh warning.

    I have tried:

    response.setHeader("Cache-Control","no-cache"); //HTTP 1.1
    response.setHeader("Pragma","no-cache"); //HTTP 1.0
    response.setHeader("Cache-Control","no-store"); //HTTP 1.1
    response.setDateHeader ("Expires", 0); //prevents caching at the proxy server

    And my struts scope is request.

    Can anybody help me?????

    DB:2.38:History.Go(-1) To Form Page 3f

    If you navigating to a page with "back" or "forward" functions of the browser, browser usually displays the cached form of the page. However, if you specify not to chache the page, then browser has to send a request to server to get the contents. In this situation if the requesting method is "GET", browser doesn't pop up a refresh warning, but if the page uses "POST" method then the browser needs to re-send the form data to the server (which requires permision from the user.).

    Hope this explains the situation.

  • RELEVANCY SCORE 2.38

    DB:2.38:Tolly Report: 300 Series Managed Switches Vs The Competition fk


    "Cisco has raised the bar for this product category."
    "The new Cisco 300 Series switches offered the most extensive capabilities, best performance, lowest latency, lowest overall energy consumption, and best user experience of any product in the evaluation. Cisco has incorporated the most extensive IPv6 support Tolly has seen in this class of product,  which is an increasingly important feature for businesses of all sizes    now    that the IPv4 address space is fully allocated. The combination of an intuitive Web interface, delivering both simple and advanced configuration and management, and best-in-class pricing make these products ideal for the markets being served."

                        --- Kevin Tolly, founder, The Tolly Group

    Cisco Systems commissioned Tolly to evaluate several models of the  new Cisco Small Business 300 Series Managed Switches along with  comparable models from D-Link, HP Networking, and NETGEAR. In all,  eleven switches were tested.

    The bottom line, the Cisco 300 Series 10/100 and GbE Managed Switches delivered:

    Wire-speed, non-blocking, Layer 2 throughput at all frame sizes tested from 64 to 1518 bytesConsistently low latency at all frame sizesBest Price/Performance among switches testedMost extensive feature set: IPv6, traffic shaping and rate limiting, scope of GUI-based configurationLowest power consumption in 2 of the 3 classes testes, and best-in-class power efficiency overallMost extensive set of IPv6 protocol and application supportBest usability with a simplified user interface delivering both basic and advances capabilities in an intuitive fashion

    Download report

    DB:2.38:Tolly Report: 300 Series Managed Switches Vs The Competition fk


    Not a very user friendly interface for configuring.  Far to many dependancies.  Often using the "copy port settings" does not work because one of the destination ports may have another VLAN or type set.  This defeats the purpose of "copy port settings"

    Cannot set a monitor port destination if port is something other than access vlan 1. OR "error port x belongs to a vlan".. who cares what vlanit is!!  it is a destination monitor and I don't want to go through the 20 step hassle to redifine my destination port to make it specificall access vlan 1.

    LACP doesn't seem to work.  Even worse, I get the same "Port X belongs to a vlan" if the participating port is something other than access vlan 1.  This is totally useless.

  • RELEVANCY SCORE 2.38

    DB:2.38:Scale Clips Using The Timeline- Doesn't Seem To Work Well? 93



    I had been scaling my clips (200%) using the effect control panel, and decided it would be a couple less clicks to simply change the property to "Motion:Scale" in the timeline and drag the bar on the clip up to scale it- but it's strange, because if I drag it all the way up (600 units is the highest) the clip is scaled by 150%. What's the thought behind this? I mean, how can I use this feature to scale the clip in an intuitive way? Ideally, wouldn't dragging the bar to 200 scale the image by 200%? Is this simply not what that feature is for? What WOULD someone use this feature for if not this?

    DB:2.38:Scale Clips Using The Timeline- Doesn't Seem To Work Well? 93


    Yeah, we both agree on that one. I posted this question to learn more about the use of the Timeline's Motion:Scale feature.

  • RELEVANCY SCORE 2.38

    DB:2.38:Conversational Scope Behavior: Inconsistent? jz


    With JSP, we could only choose between page,request,session and application scope... EJBs gave us the option between stateless and stateful (session) scope, but until Seam we didn't haveconversational scope.
    Now, with all the other scopes, things works in a particular way all the time, if I configure something as stateless, I know it is going to be stateless all the time, I know that each time I ask for that component I am going to get a different instance. Same thing goes for components in the page,request,session and application scope... but, if my component is it conversational scope, that its behavior is undefined.
    If I am in a TC, it will behave in one way, and if I am in a LRC it will behave in another way, not, this is can be seen as a feature (you can enhance an TC in to LRC) but it also means you can not use TC once you enter LRC mode. Conversational Scope is the only scope that has two mutually exclusive operation modes.
    So... what to do if I want to store in a TC and at the same time store something else in a LRC ?
    What about a new feature that allowed us to specify a non promotable TC component? something like:

    @Out(scope=ScopeType.TEMP_CONVERSATION)
    private Type object

    DB:2.38:Conversational Scope Behavior: Inconsistent? jz

    You know, maybe we should set up an example and ask the jboss guys explain how they would approach the situation.
    I have the exact scenario that you posed. We tried using SEAM's default navigation abilities and could never get it to work properly. There is no way to be in a long running conversation and pass data to another long running conversation and keep them seperate, or in your case keep your temporary conversation temporary and not have it become long running when passing data to your LRC. All of this navigation is probably able to be done using pages.xml, but I think in large applications most people aggree that pages.xml is not a viable solution and really xml is not the spot to have logic. It is too far removed from the code. If your writing a 1 man band application then pages.xml is fine. But it's absolutely useless in a large project.
    Navigation should be handled in code. Ideally a brand new programmer should be able to start working on my application and navigate through the code and know exactly what and where the application is going. Pages.xml does not allow this.
    I don't know exactly what the solution is, but I'm happy with the NavigationManager class we've written on our application. We don't have temporary conversations at all, but we have completely modularised our application so that no two modules share the same conversation. All modules run in their own long running conversation. (And yes we can have module x go to another instance of module x with no problems at all) We don't use the nestedConversation concept as it is ill defined. We have no navigation in pages.xml and all our our navigation can be followed in code.
    So for instance if I want to go from module X to module Y I would make a call to moduleY.gotoModuleYPage(X parameter). My NavigationManager takes care of leaving the current conversation, starting a new conversation, executing the method (passing in the parameter). Because NavigationManager is Session scoped it is able to pass the params from one conversation to another but it doesn't have the drawback of most Session scoped beans in that it has no state. (Well it does but it's not necessary to have, I have state in it for my own application logic)
    I would imagine that SEAM should support something like this at a much more fundamental level.
    I should be able to annotate a method with something like

    @NewConversation
    public navigateToModuleY(Y param)

  • RELEVANCY SCORE 2.38

    DB:2.38:Simple Tap Feature Request k7


    It would be very useful to be able to reorder the workspaces. There is a lot of preloaded "junk". I want to create a workspace with MY stuff but new workspaces are at the end of the chain. When Simple tap launches it's with the "junk" workspace first. I then have to scroll to MY workspace. It's nice that Simple Tap remembers where you left off after that so it comes back to MY screen. There is also something intuitive in being able to place workspaces inYOUR OWN logical priority order. Ex: Work Programs - Documents - Games - ShoppingI worked around it by moving all the "junk" tiles to the tail end workspaces. A lot of work.Workspace titles might be a nice touch as well.

    DB:2.38:Simple Tap Feature Request k7

    It would be very useful to be able to reorder the workspaces. There is a lot of preloaded "junk". I want to create a workspace with MY stuff but new workspaces are at the end of the chain. When Simple tap launches it's with the "junk" workspace first. I then have to scroll to MY workspace. It's nice that Simple Tap remembers where you left off after that so it comes back to MY screen. There is also something intuitive in being able to place workspaces inYOUR OWN logical priority order. Ex: Work Programs - Documents - Games - ShoppingI worked around it by moving all the "junk" tiles to the tail end workspaces. A lot of work.Workspace titles might be a nice touch as well.

  • RELEVANCY SCORE 2.38

    DB:2.38:Re: Click On The Calender Button Of Adf Inputdate Deletes All Other Fields!! z9


    Please change ur page scope to request scope or hold values in view scope

  • RELEVANCY SCORE 2.38

    DB:2.38:Request Object p1


    hi...
    i have typed the following code and i have a small doubt.... any help will be greatly appreciated.
    public class RequestServlet extends HttpServlet {

    protected void doPost(HttpServletRequest req, HttpServletResponse resp)
    throws ServletException,
    IOException {

    String one = req.getParameter("textbox1");
    String two = req.getParameter("textbox2");
    String three = req.getParameter("textbox3");

    req.setAttribute("box1value",one);
    req.setAttribute("box2value",two);
    req.setAttribute("box3value",three);

    resp.sendRedirect("requestscope.jsp");
    }
    }

    my control is transfered to REQUESTSCOPE.jsp page, there i have the following statements

    %out.println("Value given in textbox1(REQUEST SCOPE):" + request.getAttribute("box1value"));%hr
    %out.println("Value given in textbox2(REQUEST SCOPE):" + request.getAttribute("box2value"));%hr
    %out.println("value given in textbox3(REQUEST SCOPE):"+request.getAttribute("box3value"));%hr

    this prints NULL as output

    could anybody please explain in detail why this happens???

    Thanks
    Snehan

    DB:2.38:Request Object p1

    thanks a lot karanjit, this is what i wanted to know.

  • RELEVANCY SCORE 2.37

    DB:2.37:E72 Music Player Features Request / Suggestions 83



    Hello,

    I know that E72 is a business phone and that there are music control buttons on certain hands free, but...

    I have some features requests for E72 music player application:

    1. Please make call button on hands free to act as next song button, the same as call button on hands free acts as next radio channel on classic radio. Other players have this feature (such as PowerMP3), but since I have paid a lot of money on E72, I would like to see this feature build in its own music player.

    2.Please make music player to allow in an intuitive way to add music folders. By default it adds everything, including ringtones, mms-es and so on. Maybe an option/question of starting from a blank play list on first use would be nice.

    3. When deleting a song from a play list, please only remove it from the list by default, not physically, or ask the user, or use a sub-menu with the option with default option "only from play list".

    4. Make space bar default key to select/unselect songs for certain actions. Using the D-pad in certain contexts it's really confusing.

    Just and advice: design the application as the user expects to. Users have experience with other players on phones or PC, so...take example.

    Thank you!

    DB:2.37:E72 Music Player Features Request / Suggestions 83


    Hello,

    I know that E72 is a business phone and that there are music control buttons on certain hands free, but...

    I have some features requests for E72 music player application:

    1. Please make call button on hands free to act as next song button, the same as call button on hands free acts as next radio channel on classic radio. Other players have this feature (such as PowerMP3), but since I have paid a lot of money on E72, I would like to see this feature build in its own music player.

    2.Please make music player to allow in an intuitive way to add music folders. By default it adds everything, including ringtones, mms-es and so on. Maybe an option/question of starting from a blank play list on first use would be nice.

    3. When deleting a song from a play list, please only remove it from the list by default, not physically, or ask the user, or use a sub-menu with the option with default option "only from play list".

    4. Make space bar default key to select/unselect songs for certain actions. Using the D-pad in certain contexts it's really confusing.

    Just and advice: design the application as the user expects to. Users have experience with other players on phones or PC, so...take example.

    Thank you!

  • RELEVANCY SCORE 2.37

    DB:2.37:[Feature Request] Font Size Of Tab Labels Of A Tab Control sm



    Hi,

    I was looking for a way to increase the font size of the text labels of a tab control but couldn't find a corresponding setting in the ribbon.

    Maybe this is something you want to consider in a future release.

    Nicola

    DB:2.37:[Feature Request] Font Size Of Tab Labels Of A Tab Control sm


    Hi,

    I was looking for a way to increase the font size of the text labels of a tab control but couldn't find a corresponding setting in the ribbon.

    Maybe this is something you want to consider in a future release.

    Nicola

  • RELEVANCY SCORE 2.37

    DB:2.37:Feature Request: Change Management fx



    1. Would love to have a change management system that allowed for branching; eg, purchase requests all go to a designated manager level in that program; ergonomic requests all go thru HR; rights requests go to privacy officer, etc.

    2. Generally the process for the change agent is clunky not intuitive like the rest of the app; feels kind of "stapled on" rather than a truly integrated piece.

    Thanks.

    DB:2.37:Feature Request: Change Management fx


    This is possible today with the current change management module. You can set up different change management policies with different approvers based on the type of request. Create a work order type called Purchase and a change policy linked to that with the approvers required for that type of request. Same with the Ergonomic requests. Create the types and policies and set up the approvers accordingly.

    If you can give more details on what you think is clunky about the change module, we can take a look and try to improve it.

    Thanks for your feedback.

  • RELEVANCY SCORE 2.37

    DB:2.37:[Feature Request] Audio Volume Control c7



    Hi there,

    I'm not sure if this is the right place to post a request for a new feature.. But feel free to move this port to the right place.

    As you may've understood from the post title, this is a request for adding the ability to control the audio volume from the WD TV Live remote. It's better than holding two remote controls, one for the video playback and the other for the audio..

    Thanks,

    DB:2.37:[Feature Request] Audio Volume Control c7


    Just wanted to mention this is now available in homebrew:http://forum.wdlxtv.com/viewtopic.php?f=48t=833