• RELEVANCY SCORE 4.81

    DB:4.81:K5400 Will Not Print More Than One Page At A Time. k7





    The K5400 Office Jet Pro will not print more than one at a timewhen I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.

    Using a Windows XP SP3 computer.

    Thank you, Marion

    DB:4.81:K5400 Will Not Print More Than One Page At A Time. k7


    The K5400 Office Jet Pro will not print more than one at a timewhen I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.

    Using a Windows XP SP3 computer.

    Thank you, Marion

  • RELEVANCY SCORE 3.54

    DB:3.54:Hp Pro K5400 Printer Unable To Print From Tray 1 And Tray 2 With Two Page Letter In Word 2010 3d





    I've new Dell Vostro notebook with Windows 7 64 bit and MS professional.

    This is my existing Printer is HP Pro officejet K5400 with 2 trays. Have set-up tray 2 as default, tray 1 for headed paper.

    Previous system was Windows XP with MS office 2003. letters would print with letterhead from tray 1 and other pages from defualt tray 2.

    Now with 2 or more page letter - printer will print all from default tray 2 if I select "print from last page to front page" If you select reverse option - it will print all pages from tray 1.

    [serial number removed for privacy]

    DB:3.54:Hp Pro K5400 Printer Unable To Print From Tray 1 And Tray 2 With Two Page Letter In Word 2010 3d


    I've new Dell Vostro notebook with Windows 7 64 bit and MS professional.

    This is my existing Printer is HP Pro officejet K5400 with 2 trays. Have set-up tray 2 as default, tray 1 for headed paper.

    Previous system was Windows XP with MS office 2003. letters would print with letterhead from tray 1 and other pages from defualt tray 2.

    Now with 2 or more page letter - printer will print all from default tray 2 if I select "print from last page to front page" If you select reverse option - it will print all pages from tray 1.

    [serial number removed for privacy]

  • RELEVANCY SCORE 3.54

    DB:3.54:Officejet Pro K5400 Wont Print Pdf Files 3z





    Hi I have a networked k5400 that wont print pdf files. It will print from any other application without problem. When sending a pdf file it goes through the motions but theres no output. I have gone through the advanced options in adobe acrobat and selected print as image but still no output

    DB:3.54:Officejet Pro K5400 Wont Print Pdf Files 3z


    Hi I have a networked k5400 that wont print pdf files. It will print from any other application without problem. When sending a pdf file it goes through the motions but theres no output. I have gone through the advanced options in adobe acrobat and selected print as image but still no output

  • RELEVANCY SCORE 3.51

    DB:3.51:Pro K5400 Power Light Flashes p7



    The power button on our Pro K5400 Printer flashes continuously. Nothing will print. I have tried clearing the print spooler andresetting both the PC and the Printer but the light keeps flashing. It is the only light flashing. I have tried reseating all ink cartridges and print heads. Not sure what else to try.

    DB:3.51:Pro K5400 Power Light Flashes p7


    The power button on our Pro K5400 Printer flashes continuously. Nothing will print. I have tried clearing the print spooler andresetting both the PC and the Printer but the light keeps flashing. It is the only light flashing. I have tried reseating all ink cartridges and print heads. Not sure what else to try.

  • RELEVANCY SCORE 3.34

    DB:3.34:Hp Laserjet Pro P1606dn Only Prints 1st Page 7j



    The printer will only print the first page of any document that has more than one page in document.

    DB:3.34:Hp Laserjet Pro P1606dn Only Prints 1st Page 7j


    Hi @rger,

    I see by your post that you can't print multiple pages. I can help you with this.

    From the application your printing from, go to File, Print, Number of copies select 2. Uncheck Collate. You can now change the number of copies. Collate should now stay unchecked.

    Try printing the multiple page document again.

    You might have to disable all the startup items, to see if there is another program causing this issue.

    How to use MSCONFIG. Click on the Startup tab and disable all.

    Test the printer.

    Then go back in and enable all from the Startup tab.

    Download and run the Print and Scan Doctor if you are still having issues. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?

    What applications have you tried?

    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.

    How is the printer connected? (USB/Ethernet)

    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)

    Have a nice day!Thank You.

  • RELEVANCY SCORE 3.26

    DB:3.26:L7590 Memory Loss W/ Vista xz



    L7590 won't print a full page. It prints first part of page then following pages are all jibberish. Didn't have a problem until I bought new HP computer w/ Vista. I've downloaded all driver updates. Nothing seems to help. Also had same problem with an HP K5400 which worked fine until I attached it to the new computer w/ Vista.

    DB:3.26:L7590 Memory Loss W/ Vista xz

    I followed you instructions and installed the printer using the Deskjet 990c driver. Nothing changed. It still only prints out 1/2 of the page (including the Printer Test Page). Any other ideas?

  • RELEVANCY SCORE 3.24

    DB:3.24:Hp K5400 - Borderless Printing cp



    I have an HP OfficeJet Pro K5400 and want to performborderless printing on a full letter size sheet 8-1/2" X 11". It used to work just fine, but for some reason it will not perform peoperly now.

    Any ideas?

    Thanks in advance...

    Oiler

    DB:3.24:Hp K5400 - Borderless Printing cp


    Hello Oiler

    What operating system do you have? You may want to try installing the printer locally and see if that resolves your issue. If the issue persists that the problem does not lie with the driver being on the server.

  • RELEVANCY SCORE 3.23

    DB:3.23:Print All Records On Next Page If More Than 3 Records sx



    Hi Gurus,

    I have a requirement where I need to print all records from the detail section on page 2 if number of records are more than 3.

    So, no records (from the detail section) will print on first page if the records are more than 3. How can i achieve this?

    Please help. Thank you.

    DB:3.23:Print All Records On Next Page If More Than 3 Records sx


    Every section except the Page Header has an option called 'New Page After'. If this is enabled it will make sure the section below it prints on a new page.

    Since, we need to print the details section on a new page only when the records are greater than 3, we need this selection to be dynamic.

    So, the formula first counts the total number of records for the field and dynamically enables that option for the Report Header essentially pushing the next section on a new page.

    -Abhilash

  • RELEVANCY SCORE 3.23

    DB:3.23:When I Print From Internet Explorer The Print Periodically Comes Out Large - Other Times It Prints Normal j9


    When I print from Internet Explorer the print periodically comes out large - other times it prints normal. I can print the same page more than once and one time it will be normal print and fit on the page and the next time it can be large print and not
    fit on the page.

    DB:3.23:When I Print From Internet Explorer The Print Periodically Comes Out Large - Other Times It Prints Normal j9

    Hi Linda,

    1. Is the issue confined to Internet Explorer and only with a specific web page?
    2. Have you made any recent software or hardware changes on the system?

    This issue may happen due to any recent changes on the system that might have changed the print options set in IE.
    Usually when you print a webpage, Internet Explorer shrinks the content of the webpage to fit the width of your paper.
    Method 1:
    You can choose the option Shrink to Fit in print options and check if it helps.
    You may refer to the article and try the steps provided for “Why is my text small when I print?”
    Printing webpages: frequently asked questions

    Method 2:
    You may also try changing the Font size in Internet Explorer and check for the issue.
    Change webpage text size in Internet Explorer
    Make the text on your screen larger or smaller

    Hope the information helps.

    Let us know if you need further assistance with Windows related issues. We will be happy to help.

  • RELEVANCY SCORE 3.12

    DB:3.12:I Can Not Print More Than 1 Page 3a


    From a web page my printer will only print the first page

    DB:3.12:I Can Not Print More Than 1 Page 3a

    From a web page my printer will only print the first page
    Care to share with us some more information, such as the particular browser?

  • RELEVANCY SCORE 3.11

    DB:3.11:Hp Officejet Pro K5400 cf



    My printer was fine when I left Wednesday last week at 5pm and the next day at 8am when I wanted to print a document My printers power I noticed was off and I tried everything to get it back on. I was just wondering if there is a reset button or is my printer down for good. I received this printer at a convention in 2009 and I will not be happt if it already has given out on me.

    DB:3.11:Hp Officejet Pro K5400 cf


    My printer was fine when I left Wednesday last week at 5pm and the next day at 8am when I wanted to print a document My printers power I noticed was off and I tried everything to get it back on. I was just wondering if there is a reset button or is my printer down for good. I received this printer at a convention in 2009 and I will not be happt if it already has given out on me.

  • RELEVANCY SCORE 3.10

    DB:3.10:Office Deskjet K5400 Of Osx 10.8 z9



    K5400 of OSX 10.8 prints exxtra page with numbers

    DB:3.10:Office Deskjet K5400 Of Osx 10.8 z9


    Mysteriously . . . .IT WORKED!!!

    Thank you ver much . . . that had been "begin'" me for three months!

    Bob

  • RELEVANCY SCORE 3.09

    DB:3.09:Officejet Pro K5400 Not Printing Equal White Borders For Pictures 7a



    I'm working on a booklet cover at my workplace, and we want to be able to print color copies of it. Our only color-capable printer in the office is an Officejet Pro K5400, and using Photoshop, I've been trying to print an 8.5 X 11-sized image on a sheet of paper the same size. Traditionally, the image can be scaled to fit in its entirety on the page with a thin white border of equal thickness on all sides surrounding it. However, when I try printing the image on the Officejet, it comes out wrong. While the left and right sides of the border are equal in width, the top barely has any white space before the image begins, and the bottom portion is thicker than all three other sides.

    At first I thought I was doing something wrong in Photoshop, but I tried printing the image again with the same settings on another, black and white-only printer and the border was fine there. I did notice that when I choose the OfficeJet in the print setup, there's a small "Needs calibration" message. I'm guessing this has something to do with the problem, but don't know what I should adjust to fix it.

    DB:3.09:Officejet Pro K5400 Not Printing Equal White Borders For Pictures 7a


    I would start by checking the hardware on the printer. There may be an alignment or cleaning that needs to be done. This document will help you figure out if it's the hardware that's causing the problem, or if it's a problem with the software. Let me know what happens.

  • RELEVANCY SCORE 3.07

    DB:3.07:Printing Problems With Photosmart D110a 13



    My Photosmart D110a (operating system Vista) prints half a page when printing a document from a web page. If I am printing more than one page , it will print about 1/4 of the final page. Seems to have problems with PDF files.

    DB:3.07:Printing Problems With Photosmart D110a 13


    Did you ever get this figured out? I'm having the same problem with the same printer.

  • RELEVANCY SCORE 3.07

    DB:3.07:Hp Officejet Pro K5400 Prints Only Yellow And Black dk



    The printer was working well until a few days ago after replacing the black cartridge on this printer it stopped printing full color - it only prints yellow and black. Also, it tries to print an allignment page after every print job. I have replaced ALL color black cartridges. I have cleaned the cartridges, realigned them, calibrated line feed, etc with no result.

    I would appreciate any assistance on this matter. I am running Windows 7 64 bit

    DB:3.07:Hp Officejet Pro K5400 Prints Only Yellow And Black dk


    The printer was working well until a few days ago after replacing the black cartridge on this printer it stopped printing full color - it only prints yellow and black. Also, it tries to print an allignment page after every print job. I have replaced ALL color black cartridges. I have cleaned the cartridges, realigned them, calibrated line feed, etc with no result.

    I would appreciate any assistance on this matter. I am running Windows 7 64 bit

  • RELEVANCY SCORE 3.03

    DB:3.03:K5400 Has Started To Print Slowly And Drop The End Of The Last Page. ks



    I have an OJ Pro K5400 that has worked fine for a number of years. It is connected to my home network and my problem relates to printing from an HP AMD A10 running Windows 8.

    The printer has started printing very slowly. It prints a bit, waits 10-15 seconds, then prints some more. Also in multi-page documents the last part of the last page printed ( the first page of the document) is missing. Test pages printed from the printer print at normal speed. Only documents sent over the network are slow.. I have run both the Printer-Scanner doctor and the Hardware Diagnostic Utility. They find no problems.

    Does anyone have any idea what is wrong with my printer and what needs to be done to fix it.

    DB:3.03:K5400 Has Started To Print Slowly And Drop The End Of The Last Page. ks


    angsaskois,

    I am happy to help. In my experience, almost all of the issues I have seen,when it comes to slow printing is going to be either A. a driver issue or B. a network issue. My biggest recommendation would be to fully uninstall and reinstall the HP software for your printer. You can find the links below to assists you.

    Uninstall

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02259020cc=usdlc=enlc=enproduct=3752462tmp...

    Reboot the computer

    Install

    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=usdlc=enlc=enproduct=2511767task=

    Let me know if this helps

  • RELEVANCY SCORE 2.95

    DB:2.95:Can't Print More Than 2 Pages At A Time k9



    Every time I try to print multiple pages, the printer will print usually 2 pages and then start the 3rd page, thenspit out the partial page. I get an error message,unable to print. I end up printing 2 pages at a time, in order to get the entire document.

    DB:2.95:Can't Print More Than 2 Pages At A Time k9


    Hello everyone,

    I have the same problem: every time I want to print more than 2 pages, the printer stops in the middle of the third page and the page is ejected from the printer. I get an error message saying that the printing job is interrupted.

    I am using an HP Pavillion 500 (Intel i7) with Windows 8.1 and an HP ENVY 4500 connected to my PC with an USB cable.

  • RELEVANCY SCORE 2.93

    DB:2.93:Defined Print Area Of More Than 1 Page Does Not Print 37


    When attempting to define print area that spans more than one page, several of my users are not able to print more than one page. One user on Windows 7, others on XP SP3. All on Office 2010. All attempting to print to same printer.

    DB:2.93:Defined Print Area Of More Than 1 Page Does Not Print 37

    Try the steps mentioned below.
    1.Open the Excel sheet.
    2.Click on File-printand click on ignore print area check box.
    3.Click printand check if it works.

    Ruchi Bisht

  • RELEVANCY SCORE 2.91

    DB:2.91:K5400 Only Prints In "Best" Print Quality dm



    I hooked this printer up to my laptop that runs Windows 7. The print quality in "Normal" mode is horrible. It is not even close to being acceptable. It looks like the cartridges are out of ink but I know they are fine. I changed it to "Best" and the quality is fabulous. My question to you is whether there is a software problem with Windows 7? The downside of running "Best" quality is that the speed is slower and it uses a lot more ink. Is there any way to reload the software?

    DB:2.91:K5400 Only Prints In "Best" Print Quality dm

    I would try using a generic print driver in an attempt to fix this print quality issue and to help you conserve ink.Hereis a link to another thread that will show one how to download the alternative drivers for any Windows OS that one may have. Please remember to kudos the author if that thread in the post is helpful to you.

  • RELEVANCY SCORE 2.89

    DB:2.89:Printing Blank Page Before And After Document 9k


    In Microsoft Excel 2007, all of my documents print with a blank page before and after the intended document.
    This doesn't occur when printing fromMicrosoft Outlook 2007.
    I have an HP OfficeJet Pro k5400 printer and Windows XP Professional.
    How do I remove these blank pages from printing??

  • RELEVANCY SCORE 2.88

    DB:2.88:Double-Sided Option In Hp Pro K5400 With Osx 10.7 (Lion) kx



    I have an HP Pro K5400 printer installed on my Mac. After I select the double-sided option under printer prefs, if I print a double-sided document, the next time I try printing a double-sided document, the option has gone. When I go to the printer's preferences, the double-sided option is now unchecked. When I select it, I am now able to print double-sided just one more time, and so on.

    I have tried reinstalling the printer several times, and this keeps happening. The driver's version is 4.0.2

    DB:2.88:Double-Sided Option In Hp Pro K5400 With Osx 10.7 (Lion) kx


    Fixed it!

    The HDD had some errors. Running the "repair disk" option in disk utlity solved it.

  • RELEVANCY SCORE 2.87

    DB:2.87:Officejet Pro K5400 Cartridge Fail dd



    trying to print with officejet pro k5400 the yellow led on the display blinks. This printer has 4 cartridges.

    After:

    checking the cartridge,

    using a new cartridge,

    cleaning the contacts,

    checking all the advices of HP,

    the yellow led comes back.

    Even when I try to print a text in only black, one page is been printing, but he stops and blocks the next page(s)

    How could I fix this problem ?

    DB:2.87:Officejet Pro K5400 Cartridge Fail dd


    Welcome to the forums fransom

    I saw your post about the yellow led light blinking on your Officejet Pro K5400 printer. I would suggest for you to try all of the steps in the guide below. I hope this helps you!

    The Power light and one or more of the printhead lights blink

    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.

    Have a great day!

  • RELEVANCY SCORE 2.87

    DB:2.87:My Account History Print pd



    Is anyone able to print more than one page of their Account History?

    I look at historical transactions, and there is more than one page of data. I press the "Print" link, and all it shows it the current page of transactions.

    DB:2.87:My Account History Print pd


    Try the Business Report Portal. If may or may not make a difference.

    Regards,

    skier

  • RELEVANCY SCORE 2.85

    DB:2.85:K5400 Excel Crashes 9s



    Excel crashes when I try to print or change any page settings with some spreadsheets. It doesn't happen with all my spreadsheets. There is no unusual or different formatting in the spreadsheets that crash. The spreadsheets are small, single page. I haven't had the problem with any other application. If I change my default printer to another printer the spreadsheet will print to that printer.

    I'm running XP Professional, printing to a HP K5400, using MS Excel version 3.

    Any ideas or help will be greatly appreciated.

    Have reinstalled the software and drivers several times.

    Thanks.

    DB:2.85:K5400 Excel Crashes 9s


    Excel crashes when I try to print or change any page settings with some spreadsheets. It doesn't happen with all my spreadsheets. There is no unusual or different formatting in the spreadsheets that crash. The spreadsheets are small, single page. I haven't had the problem with any other application. If I change my default printer to another printer the spreadsheet will print to that printer.

    I'm running XP Professional, printing to a HP K5400, using MS Excel version 3.

    Any ideas or help will be greatly appreciated.

    Have reinstalled the software and drivers several times.

    Thanks.

  • RELEVANCY SCORE 2.83

    DB:2.83:Print Quality Problem With Officejet Pro K5400 sm



    I purchased the above printer on August 8th of this year and I have really liked it until now. The print quality has gone to ----! I have done a chat with a technician, replaced any of the cartridges that might be low and it is worse than ever. Two thirds of the page will print okay and then the last third is either blank or very poor quality. I have tried changing the print quality from draft to best and it doesn't help. What recourse do I have? I can't find a real person to talk to.

    Does anyone out there have an answer?

    DB:2.83:Print Quality Problem With Officejet Pro K5400 sm

    I purchased my Pro K5400 in May 2008. In the beginning it was loud (still is) but the printing was beautiful. Over the last three months the color printing is really bad. I've replaced the cartridges with only HP ink, I've aligned printheads, I've cleaned printheads, I've calibrated the linefeed. The diagnostic suggests I replace the printheads. Really? After less than a year? It also sporadically feeds several pages at once. And, I do a lot of printing of claim forms, it arbitrarily expands the left margin. Oh, it also jams often. Again, I believe these last two are due to afeeding problem. I sent an online question and got answers back in somewhat broken English that seem hooked on just replacing the ink and cleaning the printheads. Also, they gave me directions on how to clear a jam. This I know as I clear jams all the time in this printer. They are unable (perhaps due to language barrier) to answer the feeding/jamming problems. I really see this as just a very bad quality printer. I've owned other HPs and never had problems like this. What is the best way to contact someone in the United States about this printer?

  • RELEVANCY SCORE 2.83

    DB:2.83:How Can I Print More Than One Page Of An Internet Site? zj



    When I try to print pages from internet sites (Facebook, Merchant Circle, Linked In, NBC.com, etc.), Firefox will only print the first page.

    In order to print more information, it is necessary to reduce the scale of the print so more of the information will print on the first page.

    How can I print out more than just one page of a website without having to make the print so small that I cannot read it when it prints?

    DB:2.83:How Can I Print More Than One Page Of An Internet Site? zj



    Firefox has problems with some style rules.

    First, it's always helpful to use any print-formatted or print-optimized version of the page. Sometimes there is a link for this.

    Second, in some cases you need to use this trick: press Ctrl+a to select all content on the page, then Ctrl+p to display the print dialog, and click the radio button next to Selection.

    Those tricks don't always work, but hopefully they will help.

  • RELEVANCY SCORE 2.82

    DB:2.82:K5400 Printer mm



    I've a K5400 series printer that works just fine till a few minutes ago. Now when I click to print all colour light buttons start to blink very fast and the message 'document failed to print' appears. I've already turned off and on several times and the same thing happens. Any ideas?

    tks

    DB:2.82:K5400 Printer mm


    Hello iduarte,

    HP designed a quick and easy tool that diagnoses and resolves many hardware problems: The HP Hardware Diagnostic Utility. These hardware problems can prevent printing, scanning, or copying. HP recommends that you download and install the Hardware Diagnostic Utility any time you need to troubleshoot a hardware problem.

    You can find the tool by visitinghttp://www.hp.com/go/tools

    After running the tool please post back your results.

  • RELEVANCY SCORE 2.81

    DB:2.81:Officejet Pro K5400 ds



    I recently replaced my black/yellow printhead because of low printquality, after replacement, while I did not turn of the printer, it printed fine; thereafter I shut down the computer and printer but next day after starting up the printer again it gave a blinking signal of malfunction of the KY printhead; I tried to replace it en cleaned the contacts several times but with no succes; it does not print en keeps blinking all over again... Wat can I do more, the printhea

    DB:2.81:Officejet Pro K5400 ds


    Hi @HARRYVDB,

    Welcome to the HP Forums!

    I see that you have a blinking signal of a malfunction of the KY printhead with your HP Officejet pro K5400. I am sorry to hear this, but I am happy to help!

    Please take a look through this guide, 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M....

    If the guide does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.

    Hope this helps!

  • RELEVANCY SCORE 2.80

    DB:2.80:Deskjet F42010 Won't Print More Than 1 Page At A Time am



    Deskjet f42010 won't print more than 1 page. When I want to make multiple copies of documents, after scanning, the printer will only print one copy. I have to rescan and print one copy at a time. How can I resolve this problem.

    DB:2.80:Deskjet F42010 Won't Print More Than 1 Page At A Time am


    Deskjet f42010 won't print more than 1 page. When I want to make multiple copies of documents, after scanning, the printer will only print one copy. I have to rescan and print one copy at a time. How can I resolve this problem.

  • RELEVANCY SCORE 2.79

    DB:2.79:Printer Will Not Print After "Paper Out" Message 1s



    My HP Officejet Pro K5400 will not print after a "paper out" message. I have tried turning it off then on, unplugging and then plugging in at the wall receptacle, and nothing happens. Can anyone suggest a solution? I have a Mac running OS 10.5.8 Thanks for any help you can give!

    DB:2.79:Printer Will Not Print After "Paper Out" Message 1s


    Thanks for your input. I had emailed the HP support people and got a reply. (I didn't think they would help since my printer was out of warranty, but I was very pleasantly surprised.) I don't know if your version of resetting would get the same result, but the answer of resetting was right on!

    They said it was a "software conflict" with the Mac, and I needed to reset the printing system. So for anyone else who has this problem, try this:

    Apple menu—System Preferences—Print Fax—Right click (or Control click) the printer name in the list and click Reset Printing System. To add the printer, click Print Fax Preferences to open the printer's folder. If it is not added automatically, click the + sign. Select the printer to add and click Add button. After the printer name displays, try the print job. And it worked!

  • RELEVANCY SCORE 2.78

    DB:2.78:Hp K5400 Printing Perfectly Formatted Random Garbage. jc



    Hi there,

    We are having an intermittent problem with our HP K5400. Every once in a while it will print out a your page with the english characters replaced with random garbage characters. The page will be formatted correctly in every other way but the text will be completely unreadable and random. I replaced the USB cable and reinstalled the drivers. Does anyone know anything else to try?

    Thanks,

    Dr. Nick

    DB:2.78:Hp K5400 Printing Perfectly Formatted Random Garbage. jc


    Hi there,

    We are having an intermittent problem with our HP K5400. Every once in a while it will print out a your page with the english characters replaced with random garbage characters. The page will be formatted correctly in every other way but the text will be completely unreadable and random. I replaced the USB cable and reinstalled the drivers. Does anyone know anything else to try?

    Thanks,

    Dr. Nick

  • RELEVANCY SCORE 2.77

    DB:2.77:Get Absolute Page Number 7j



    I have a file have 2 page number are called "1", if I print page 1, it will alert there have more than 1 page of that page name, can javascript can get absolute page number?

    if I use app.activeWindow.activePage.name, just can get "1", I want the result is "+1"

    DB:2.77:Get Absolute Page Number 7j


    where counting starts with zero.

    Something like that:

    var myPages = app.documents[0].pages.everyItem().getElements();

    for(var n=0;nmyPages.length;n++){
    $.writeln(absolutePageNumberAsString(myPages[n]));
    };

    function absolutePageNumberAsString(myPage){

    var myString = "+" + (myPage.documentOffset + 1);
    return myString;

    };

  • RELEVANCY SCORE 2.76

    DB:2.76:K5400 Label Printing dx



    I just bought and installed a K5400dn (after 3 failed attempts). I wasusing it to print self-adhesive labels of the 4-to-a-sheet variety on A4 paper. I found that it wasn't possible to take a label off,say for example,the top left position,and then re-insert the sheet to print another label on the top right position. The sheetskews and jams when it is fed from the paper traythus destroying the rest of the sheet. Anyone had this problem? Anyone know of a work around?.

    I suppose the obvious answer is to print all four labels before taking any of them off the sheet, but that isn't always convenient. Imight want one label today and another one a couple of days later and so on. It would beawfully wasteful and expensive to print one label and chuck the other three away because you know the sheet will wreck in the printer. Never had this problem with my trusty old HP950C, but unhappily it reached the end of it's working life and had to be replaced.

    I have several other issues with the K5400 printer but will post them on other more appropriate boards.

    DB:2.76:K5400 Label Printing dx


    Thanks Arthur - very funny )I used to do the same thing, then stick all the leftover labels onto new backing sheets to re-use them, but it was a bit of a naus so I don't do that anymore. I bought a cheap Epson just for printing postage labels in black only and I have dumped the K5400 completely in favour of a refurbed HP990Cxi which is almost as fast as the K5400, prints the same quality color, is much more reliable and is a **bleep**-sight quieter!

    In fact my K5400 packed up after 3 months of average usage. After 6 months of arguments and threatening legal action HP eventually sent me a replacement (2nd hand) K5400 which also packed up after only 3 weeks. Since then they haveignored all my messages, refused to respond to Recorded Delivery mail and seem to expect me to go away and leave them alone.

    text deleted

    Take care.
    Message Edited by WendyM on 11-12-2009 07:50 AMMessage Edited by WendyM on 11-12-2009 07:51 AM

  • RELEVANCY SCORE 2.74

    DB:2.74:Officejet Pro K5400 Prints Useless Pages ... fx



    I print on macbook pro and lenovo laptop

    My printer Officejet Pro K5400 prints useless pages after it finished printing the job sent to the printer.

    Ex. I press print, the printing job completes, but then about a few minutes later, another page is fed in halfway, after another few minutes, the page comes out and there is a # [2] printed on the top left corner of the page. Then not long after that, another page suddenly pulled in the printer and out comes another nearly blank page with about 5-6 characters on the top left corner. I forgot what the printed characters were. if necessary, I can get back to you with that info later this afternoon.

    The two nearly blank pages have to come out after every print job I send to the printer before I can print a second job.

    Sometimes, I cannot wait the 10 minutes for those pages to come out so power off then on and right away the 2 almost blank pages come out almost right away.

    It's really wasting a lot of my paper.

    Is that a sign that the printer needs to be replaced?

    Thank you.

    DB:2.74:Officejet Pro K5400 Prints Useless Pages ... fx


    Hello:

    This issue has been solved see in a previous post. See link for reference:

    Solution: Previous Post

    link for dmg file for your MAC:

    MAC Driver

    tam-web

  • RELEVANCY SCORE 2.74

    DB:2.74:Officepro K5400 Phantom Paper Jam After 3 Sheets 71



    After printing one sheet I will get a phantom paper jam warning. If I send a multiple page document to printer only three sheets will print and the paper jam warning comes on. Have to turn it on and off each time I want to print. There are absolutely no paper jammed in the printer

    DB:2.74:Officepro K5400 Phantom Paper Jam After 3 Sheets 71

    Hello,

    I see that you're having an issue with the printer giving you a paper jam error message.

    I would suggest following thisdocumentto try and resolve the issue.

    Let me know the outcome.

  • RELEVANCY SCORE 2.73

    DB:2.73:Hp Officejet Pro K5400 Prints Out Extra Page With 10.9.2 zs



    Ever since I upgraded my 2012 Imac to 10.9.2 everytime I print on the HP officejet pro K5400 it spits out an extra page after each job. on the page is written 2345x in the upper left corner. This has been going on for months. I don't have the problem with the officejet pro 8600. I need to print to the k5400. Please advise

    Thank you

    BillBezmen

    DB:2.73:Hp Officejet Pro K5400 Prints Out Extra Page With 10.9.2 zs


    Hi,

    Please try installing the print driver update from here which should address your issue.

  • RELEVANCY SCORE 2.73

    DB:2.73:Can I Put More Than One Picture On A Page And Print It Out p3


    can I put more than one picture on a page and print it out using photoshop element 10

    DB:2.73:Can I Put More Than One Picture On A Page And Print It Out p3

    Yes.Go to Filenewblank fileEnter width height of your paper stock. Resolution should be in the 240-300px/in rangeIdeally the resolution of the 2 pictures should be the same valueDo the math and crop the 2 pictures so that they will fit.Once you have done this, drag each photo from the project bin to the work areaNote that each picture will be on its own layerAccess the move tool to position each picture, and to resize with the corner handles of the bounding box, if necessary

  • RELEVANCY SCORE 2.72

    DB:2.72:Officejet Pro K5400 - Offline - Windows 8 c7



    I have an Officejet Pro K5400 and am using Windows 8. For the past two days nothing will print - the computer just says "Printer is offline". I have started and restarted both the printer and computer but although the printer goes through its humming and clanking as usual, still nothing prints. It is a wireless printer and is connected correctly to the internet.

    I have followed the directions to download the "print and scan doctor" but it won't download - it just keeps jumping back to the previous screen.

    Please HELP - my warrenty has passed

    DB:2.72:Officejet Pro K5400 - Offline - Windows 8 c7


    I have an Officejet Pro K5400 and am using Windows 8. For the past two days nothing will print - the computer just says "Printer is offline". I have started and restarted both the printer and computer but although the printer goes through its humming and clanking as usual, still nothing prints. It is a wireless printer and is connected correctly to the internet.

    I have followed the directions to download the "print and scan doctor" but it won't download - it just keeps jumping back to the previous screen.

    Please HELP - my warrenty has passed

  • RELEVANCY SCORE 2.72

    DB:2.72:K5400 Giving Paper Feed Error ps



    I have an OficeJet K5400 (C8185A) and when I print a one page document it prints the page then gives a paper feed error (Power light and paper feed light both blinking, colour cartridge lights all lit).

    If I restart the printer the error clears and I can print again but it will give the errorevery time I print.

    If I print a multi-page document it always stops printing at page 4 and gives the paper feed error.

    The printer has been unused for some months but was working when it was put into storage

    DB:2.72:K5400 Giving Paper Feed Error ps


    Thank you very much for taking the time to answer, the printer is up and running again.

    I love the fact that HP go to so much trouble to pre-expire cartridges which aren't used very often 'to protect my printing system'. A cinic would think it's just about money !

  • RELEVANCY SCORE 2.71

    DB:2.71:K5400 Printer New Print Heads Changed But Still Showing Replace Printhead Message. mk



    K5400 printer new print heads changed contacts cleaned but still showing replace printhead message. Followed

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?objectID=c00844061lang=encc=ustaskI​...

    but still no joy, any help would be appreciated.

    DB:2.71:K5400 Printer New Print Heads Changed But Still Showing Replace Printhead Message. mk


    K5400 printer new print heads changed contacts cleaned but still showing replace printhead message. Followed

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​ocument.jsp?objectID=c00844061lang=encc=ustaskI​...

    but still no joy, any help would be appreciated.

  • RELEVANCY SCORE 2.71

    DB:2.71:Unable To Print More Than The First Page Of My Gmail Contacts List 18



    xxxxx

  • RELEVANCY SCORE 2.71

    DB:2.71:K5400 Dn Not Printing Black 3a



    We purchased a Officejet pro k5400 dn at work in September 2008. In November 2008, I installed the cartridges and print heads, but never finished setting the printer up (due to lack of space). In April 2009, I removed the black ink cartridge to let someone else with an operating printer use. Last week, space became avaialbale, so I tried setting up the printer. I installed a new black ink cartridge, and went through the rest of the initial setup procedure. When I went to print the test page, I got very faint unreadable print. I tried a few more times, and slowly I was getting some color, but still not getting any black. I read these forums, and tried some suggestions (cleaning cycle three times, hard reset of the machine), but still no black.

    Today when I come in, the low level light is on for yellow. Through toolbox, it says I am almost out of yellow, blue and magenta are about 3/4, and black is below half - this, and I have never seen any black on a piece of paper. Both printhead healths say monitor. The self test diagnostic page prints in magenta only - it says both my printheads are good, but mimic the ink levels given from toolbox.

    Hope someone has some suggestions - it seems like this printer that was never used will now be no good for anyone.

    Thanks,

    Pat

    DB:2.71:K5400 Dn Not Printing Black 3a


    You need to take it a couple steps further after your test print. Sounds like your print heads need cleaning or your cartridge may need aligning. It’s best to do this each time you install a new cartridge. for more information….... http://en.kioskea.net/forum/affich-40171-printer-not-printing-black

  • RELEVANCY SCORE 2.70

    DB:2.70:Ink Levels On Officejet K5400 Printer With Windows 7 1f



    recently switched to a new computer with windows 7 and downloaded the compatable 64 bit driver printer works fine but there is no more tool for ink levels and no way to determine which of the 4 ink cartridges are out of ink when I get an out of ink message. printing test page doesn't help - doesn't give ink levels and all boxes show good, even when out of ink. anyone have a solution?

    DB:2.70:Ink Levels On Officejet K5400 Printer With Windows 7 1f


    Hello bobzim,

    Well, if it would work at all it would be to install the toolbox for the K5400, create a shortcut to it and instead of entering "HP Officejet Pro K5400 series" to the target you'd enter "HP Officejet Pro K550 series" (it should be the same name as the printer has in Devices and Printers). However, if you can't get this to work, you can use the buttons on the front panel of the printer to initiate the same tasks as you can from the toolbox:

    To print a Configuration Page: Press and hold the power button, press the Cancel button 1 time, release the power button.

    To print a Print Quality Diagnostic page:Press and hold the power button, press the Cancel button 1 time, press the Resume button 4 times, release the power button.

    To align the printheads: Press and hold the power button, press the Resume button 3 times, release the power button.

    To clean the printheads:Press and hold the power button, press the Resume button 6 times, release the power button.

    I hope this helps a bit at least.

  • RELEVANCY SCORE 2.70

    DB:2.70:Hp Officejet Pro K5400 Lines Of Print Missing From Documents 3z



    Printed text documents have several lines of print missing.

    Print heads cleaned and aligned, linefeed calibrated.

    Any suggestions?

    Thanks in anticipation,

    Frank C

    DB:2.70:Hp Officejet Pro K5400 Lines Of Print Missing From Documents 3z


    Hi FrankieC,

    Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here

  • RELEVANCY SCORE 2.70

    DB:2.70:How Do I Correct "Door Open" Error In Printer Status When No Doors Are Open? Printer Will Not Print mc



    I have a K5400 printer and it won't print because of a "door open" error. I have manually tried the switches and it makes no difference.

    DB:2.70:How Do I Correct "Door Open" Error In Printer Status When No Doors Are Open? Printer Will Not Print mc


    I have a K5400 printer and it won't print because of a "door open" error. I have manually tried the switches and it makes no difference.

  • RELEVANCY SCORE 2.70

    DB:2.70:Hp Officejet Pro K5400 Slow Printing jj



    I bought a K5400 office jet pro printer and it prints very very slow. I have a Dell Inspiron 6400 laptop computer and the K5400 printer is attached to my laptop via cable.

    As soon as I print more than 10 pages - it prints ridicously slow and then if I try to use the computer at the same time a message will flash on my screen that my virtual memory is low.

    Is there anyway to speed up the print process - I feel like this printer was a waste of my money since I bought it for it's speed.

    Does anyone know if this can be fixed?

    DB:2.70:Hp Officejet Pro K5400 Slow Printing jj


    I bought a K5400 office jet pro printer and it prints very very slow. I have a Dell Inspiron 6400 laptop computer and the K5400 printer is attached to my laptop via cable.

    As soon as I print more than 10 pages - it prints ridicously slow and then if I try to use the computer at the same time a message will flash on my screen that my virtual memory is low.

    Is there anyway to speed up the print process - I feel like this printer was a waste of my money since I bought it for it's speed.

    Does anyone know if this can be fixed?

  • RELEVANCY SCORE 2.69

    DB:2.69:Unable To Print Documents With More Than One Page With Word 2010 sd


    I have Word 2010 and cannot print a document that contains more than one page. If I select the option to print the current page that works, but I have to go to each page individually in order to do so. Any ideas?

    DB:2.69:Unable To Print Documents With More Than One Page With Word 2010 sd

    Almost certainly an issue with the Printer Driver. Check on the Printer manufacturer's website for an updated Driver.
    -- Hope this helps.
    Doug Robbins - Word MVP,
    dkr[atsymbol]mvps[dot]org
    Posted via the Community Bridge
    "stanthemaster" wrote in message news:*** Email address is removed for privacy ***...
    I have Word 2010 and cannot print a document that contains more than one page. If I select the option to print the current page that works, but I have to go to each page individually in order to do so. Any ideas?

    Doug Robbins - Word MVP dkr[atsymbol]mvps[dot]org

  • RELEVANCY SCORE 2.69

    DB:2.69:K5400 Not Printing Black. 8a



    I have installed all new ink tanks cartridges. When I print a Diagnostic page it comes out in all red color, no black. I have also printed out, Im guessing a HP demo page showing a colored graphic of some tea pots, the page also has some blue lettering on it as well. The diagonostic page says that my printerhead status is good. Also it says in the event log for ID 125, Event 69666, I have a firmware Error. I am running Windows 7, and have been so for many months, with no problems until recently.

    Any help would be greatly appreciated! Thank you in advance.

    DB:2.69:K5400 Not Printing Black. 8a


    I have the same problem but if I rmove the print head it would print OK for a while then back to not printing. I suspect that the ink is blocked between the cartridge and the print heads ?

    All other colours print out OK. I've cleaned the print heads, printed test sheets and so on .

    Again any help would be good.

  • RELEVANCY SCORE 2.69

    DB:2.69:Photosmart C4280 Only Prints First Page, No Other Pages s8



    My Photosmart C4280 will only print the first page of any job. The queue shows it is printing, but even after more than an hour, no additional pages will print.

    I have disconnected the power for more than 5 minutes in an effort to reset the device. No luck.

    Suggestions?

    DB:2.69:Photosmart C4280 Only Prints First Page, No Other Pages s8


    Hello ClearChoice,

    Welcome to the HP Forums!

    I understand you can only print the first two pages, then gets stuck in your Print Queue as "Now Printing". I will do my best to assist you! What is your operating system on your computer? Click here to find out: Windows.

    Please follow this entire HP document on 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print.

    Let me know if this document resolves your issue or not. Looking forward to hearing from you.

  • RELEVANCY SCORE 2.68

    DB:2.68:Officejet Pro K5400 Dtn/Snow Leopard p1


    Am getting run around from both Apple and HP re: Officejet Pro k5400 dtn working w/Snow Leopard. VERY frustrating. Since installation of Snow Leopard cannot print on both sides of paper. Sigh. Have a 5,000(!!) page work project due and cannot get anyone at either company to tell me if K5400 will be compatible w/Snow Leopard. Does anyone know anything reliable?

    DB:2.68:Officejet Pro K5400 Dtn/Snow Leopard p1


    Just received email from HP (from a query I had sent to them previously)....

    "our research team is working on the drivers. The software would be released within a month or so."

    A month or two! Groan. I have over 5,000 pages to print and have to wait a month or two?! Sigh. Oh well, I hope they know what they are talking about and the K5400 dtn will eventually be back in service.

    Thanks for your help; I appreciate it.

  • RELEVANCY SCORE 2.68

    DB:2.68:Reader 9.0 - Printing With Tiling f3


    I'm using Reader 9.0 on a Windows XP system. I'm trying to print an image on more than one page. This will enlarge it enough to read some fine print details. However, I don't seem to have the Tiling option in my Print Dialog box, in the Scaling menu.

    I can't go with No Scaling because than it prints on too many pages.

    Is there another way to print like this?

    Thank you.

    DB:2.68:Reader 9.0 - Printing With Tiling f3

    However, I don't seem to have the Tiling option in my Print Dialog box, in the Scaling menu.

    This option is available in Adobe Acrobat, not Adobe Reader.

  • RELEVANCY SCORE 2.68

    DB:2.68:K5400 Dn Not Printing Bottom ~10mm Of Page 8m



    Have a new K5400 DN here, connected via network to 2 PC's.

    One XP machine, one Vista machine.

    Fresh installation of printer, driver installations no dramas.

    XP machine prints documents from any source (tried web/PDF, DOC etc..) with NO problems.

    Vista machine prints the same documents from the same sources - but neglects to print the bottom 10mm or so of the page.

    Printer "Minimize Margins" is set to "On". No change.

    Any ideas? Help greatly appreciated.

    DB:2.68:K5400 Dn Not Printing Bottom ~10mm Of Page 8m


    Have a new K5400 DN here, connected via network to 2 PC's.

    One XP machine, one Vista machine.

    Fresh installation of printer, driver installations no dramas.

    XP machine prints documents from any source (tried web/PDF, DOC etc..) with NO problems.

    Vista machine prints the same documents from the same sources - but neglects to print the bottom 10mm or so of the page.

    Printer "Minimize Margins" is set to "On". No change.

    Any ideas? Help greatly appreciated.

  • RELEVANCY SCORE 2.68

    DB:2.68:When I Have An Email That Has More Than One Page The Printer Will Print Only The First Page 9j



    hp psc1315xi

  • RELEVANCY SCORE 2.67

    DB:2.67:Officejet Pro K5400 Frequently Jams 3s


    Hi, I have recently purchased this printer (have always bought HP products for 10 years) but this is not up to the standards expected. It will print one page then jams on the next with the paper snarled up inside the printer then when I have cleared the paper,it will print again then snarls up the next paper. Sometimes it will snarl up several paper then print normally! Is there a solution to this please? thanks

    DB:2.67:Officejet Pro K5400 Frequently Jams 3s

    Hi, I have recently purchased this printer (have always bought HP products for 10 years) but this is not up to the standards expected. It will print one page then jams on the next with the paper snarled up inside the printer then when I have cleared the paper,it will print again then snarls up the next paper. Sometimes it will snarl up several paper then print normally! Is there a solution to this please? thanks

  • RELEVANCY SCORE 2.67

    DB:2.67:Print More Than One Page At A Time 1z



    I need help configuring my printer to permanently print 2 pages every time.

    DB:2.67:Print More Than One Page At A Time 1z


    I need help configuring my printer to permanently print 2 pages every time.

  • RELEVANCY SCORE 2.67

    DB:2.67:Officejet K5400 Won't Take Paper From Tray 2 (Mac) z1



    I recently attached my K5400 (with duplexer and second tray) to my new MacBook Air and downloaded the current drivers from HP. The printer utility shows both the duplexer and the additional tray as installed.

    However, nowhere can I find a way to make the printer take paper from Tray 2. I understand from some of the Mac forums that this is thorny but solvable using settings, but I haven't been able to find the solution.

    I have locked Tray 1 and set Tray 2 as default, but when I look at the print job settings in Word it still shows Tray 1 as the paper source.

    Any available advice will be much appreciated.k

    John Pearce

    Sarasota, FL

    DB:2.67:Officejet K5400 Won't Take Paper From Tray 2 (Mac) z1


    jmpsfs -

    I would be very surprised if the driver included in System 10.6.7 did not include both duplexer and second paper drawer capabilities. They are certainly included for other inkjets, such as my Officejet Pro 8000n. I hope you saw the comments I made in your other thread.

  • RELEVANCY SCORE 2.66

    DB:2.66:Mirrored Printing z1


    When I print a page on my HP K5400, the output is printed as a mirror image (backwordson the page). Any idea on what's wrong? Has anyone encountered this problem?

    DB:2.66:Mirrored Printing z1


    I have a fix for this problem but you have to dig into the registry with Regedit. But first I wanted to summarise the problem and a couple of simpler workarounds.

    Problem:

    All the HP 'Printing Shortcuts' available from the Printing Preferences window go wrong, possibly after upgrading Windows XP to SP3. The effect is that whenever you select one of these presets, it prints in mirror image unless you manually, after selecting the shortcut, go to the 'Advanced' tab and switch 'Mirror image' to 'Off'. This works fine until you next select one of the shortcuts.

    Workaround for default printing:

    As others have noted, go to Start/Printers, select the printer and choose 'Printing Preferences'. From the Advanced tab, alter 'Mirror image' to 'Off'. Click 'OK'. This works fine but only for the default settings.

    Workaround for custom shortcuts:

    You can create custom 'Printing Shortcuts' from the Printing Preferences window and provided you manually set 'Mirror image' to 'Off' these should work fine. But you can't alter or delete the pre-existing shortcuts, except by editing the registry as shown below.

    Fix for Preset HP Printing Shortcuts:

    This involves changing registry keys and the usual caveats apply. Do Start/Run/regedit, then navigate to:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers\[HP Officejet Pro K5400 Series]\DMCDriverData\Printing\HPPresetRoot\PresetPoolData

    Obviously the printer name may vary. Select one of the PresetPool entries (i.e. PresetPool:0, PresetPool:1 etc) and double-click to modify. Scroll down to around about 0DA8 or shortly thereafter where you see the word on the right-hand side ‘H.P.M.i.r.r.o.r.P.r.i.n.t.i.n.g’ (each letter separated by a period which indicates a zero value). After this you will see some zero values and then the word ‘T.r.u.e’.

    Alter the letters of T.r.u.e to read F.a.l.s.e taking care not to change the number of bytes (e.g. place cursor just to left of the letter to change, press DELETE, then type the replacement letter, then cursor right to skip over the zero value to the next letter). False has one more character than True so, as you might guess, you need to alter to 'e' the 2nd zero value following the final 'e' of True. After the final 'e' of False there should be one or more zero values (shown as .) and then the next entry (H.P.A.u.t.o.D.u.p.l.e.x.S.c.a.l.i.n.g) should start with a carat character (^).

    Do this for each preset and for each HP printer on your system that has this 'PresetPoolData' keyset.

    The fix works immediately.

  • RELEVANCY SCORE 2.66

    DB:2.66:Laserjet 5mp Won't Print 1 Page, Will Print 3 Others, More Memory Error sd



    Laserjet 5mp.

    Error message:

    This job requires more memory than is available in this printer.

    I have chosen Optimize For Portability

    Available Postcript Memory is set to 3,000 kb, I have 3mb of memory.

    Only font is Arial.

    I printed only the 1 page out of 4 pages, the other 3 pages printed.

    DB:2.66:Laserjet 5mp Won't Print 1 Page, Will Print 3 Others, More Memory Error sd


    Laserjet 5mp.

    Error message:

    This job requires more memory than is available in this printer.

    I have chosen Optimize For Portability

    Available Postcript Memory is set to 3,000 kb, I have 3mb of memory.

    Only font is Arial.

    I printed only the 1 page out of 4 pages, the other 3 pages printed.

  • RELEVANCY SCORE 2.66

    DB:2.66:920 Won't Print More Than One Page 8p


    mY 920 will print one page but hangs on the canceling part. I am forced to power the printer off and on and then I can print another page. I have reinstalled the drivers....same results...any ideas? thanks

    Jan

    DB:2.66:920 Won't Print More Than One Page 8p

    mY 920 will print one page but hangs on the canceling part. I am forced to power the printer off and on and then I can print another page. I have reinstalled the drivers....same results...any ideas? thanks

    Jan

  • RELEVANCY SCORE 2.65

    DB:2.65:K5400 Printhead Problem km


    We have been using an Officejet Pro K5400dtn in a home office network under Windows XP SP2. We bought the printer 11 months ago and it has been working fine. Until 2 days ago. During a print job, it stopped printing and ALL the lights on the panel of the printer were blinking rapidly. I had to unplug the power cord to undo that. After that the printer indicated that the cyan/magenta printhead would need replacing. The respective light was blinking on the panel and the embedded web server was telling that, too. The printer would not print any more. I took the printhead out and tried to clean the contacts (accoding to the handbook). It did not make a difference. I left the printer turned off over night. When I switched it on the next day, the printer indicated that the yellow/black printhead would need replacing now but not the cyan/magenta one. It appears that the printer cannot make up his mind which one it is. That does not instill any confidence that changing the printhead will fix the problem. Also the embedded print server tells me that there is still warranty on those printheads until May 2010. What can I do?

    DB:2.65:K5400 Printhead Problem km


    Hi

    Have you also tried cleaning the contacts in the printer?

    Figure 4: Cleaning contact points

  • RELEVANCY SCORE 2.65

    DB:2.65:Printer Issues da



    OfficeJet Pro K5400 Working with a color printer. It has been sitting in storage for several months and now when we try to print, the colors vary down the page. First line will be black, next line kind of charcoal colored, next line gray, next line yellow/gray, next line pale yellow, then back to black.Installed new cartridge(s), not having an impact on color or quality. Suggestions on what we might try to do?

    DB:2.65:Printer Issues da


    Hi,

    I would reather suspect the Printheads might been damaged after such a period

    Did you replaced any of the ink cartridges?

    Try printing a Self Test report and check if it may indicate any printhead status within the Prnthead Status section:

    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c00843999cc=emea_middle_eastdlc=enlc=enprodu​...

    Additionally try following the steps below to perform different cleaning tasks:

    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c02451504cc=emea_middle_eastdlc=enlc=enprodu​...

    Shlomi

  • RELEVANCY SCORE 2.65

    DB:2.65:Can Not Print All Pages pj


    when I geth a e-mail, there are more than page, it will only print the first page, NOT theother onens. My printer is brother.

  • RELEVANCY SCORE 2.65

    DB:2.65:Have Release 4.0.1 But Still Print Only One Page Of Multi Page Report 9a



    When I try to print history from my bank online system it will display correctly but will never print more than the first page. I am current with release 4.0.1

    DB:2.65:Have Release 4.0.1 But Still Print Only One Page Of Multi Page Report 9a


    When I try to print history from my bank online system it will display correctly but will never print more than the first page. I am current with release 4.0.1

  • RELEVANCY SCORE 2.64

    DB:2.64:My Officejet Pro 8500 A910 Will Not Print More Than One Copy Of A Print Job At A Time. Help! z9



    Whenever I try to print more than one copy of a print job, I get an error message. Love the printer, but if I ever have to print several copies of something I haven't been able to do this since day one.... Multiple page jobs are no problem, but multiple copies of the same job, no way unless I print them one at a time. Suggestions?

    DB:2.64:My Officejet Pro 8500 A910 Will Not Print More Than One Copy Of A Print Job At A Time. Help! z9


    Hello Madagon,

    What operating system are we working with?

    What is the error message you are getting?

  • RELEVANCY SCORE 2.64

    DB:2.64:Why Can I Not Print My Email And Just The Email And More Than Just The Screen Page Very Frustrating. kx


    Outlook Email ONLY PRINTS ENTIRE SCREEN PAGE ..Regardless of PRINTER Preferences and even of highlighting selections. STILL WILL ONLY PRINT ONE ..REPEAT ONE, PAGE wich is portion of SCREEN PAGE.

  • RELEVANCY SCORE 2.64

    DB:2.64:What Can I Do k1


    I have a Officejet Pro K5400 dtn and a dn. My operating systems are Windows Vista on a HDX 16 laptop 64 bit and 32 bit on the Dell desktop. I use Microsoft Office 2007 and Adobe CS4. When I print with the duplex (both sides) for example a greeting card the first page distorts the top start with the right side. This is getting worse, when I print pgs 1 and 4 on one side it still distorts the color. The same file does not distort or smear on my Officejet Pro K8600 dn or my Dell laser or Inkjet 948. I switched to Adobe Indesign or Illustrator to design the greeting cards and sometimes it smaers amnd sometimes not. What is going on with my K5400 dtn and dn? I scanned the results I cannot attach or paste. This is driving me crazier than I am. HP technicians want to replace the unit but replacing did not help the dn replacement. I have cleaned the print heads, duplexer, aligned and realigned. I have uninstalled the printer drivers and reinstalled, it works fine once then screwing up again.

    DB:2.64:What Can I Do k1

    I have a Officejet Pro K5400 dtn and a dn. My operating systems are Windows Vista on a HDX 16 laptop 64 bit and 32 bit on the Dell desktop. I use Microsoft Office 2007 and Adobe CS4. When I print with the duplex (both sides) for example a greeting card the first page distorts the top start with the right side. This is getting worse, when I print pgs 1 and 4 on one side it still distorts the color. The same file does not distort or smear on my Officejet Pro K8600 dn or my Dell laser or Inkjet 948. I switched to Adobe Indesign or Illustrator to design the greeting cards and sometimes it smaers amnd sometimes not. What is going on with my K5400 dtn and dn? I scanned the results I cannot attach or paste. This is driving me crazier than I am. HP technicians want to replace the unit but replacing did not help the dn replacement. I have cleaned the print heads, duplexer, aligned and realigned. I have uninstalled the printer drivers and reinstalled, it works fine once then screwing up again.

  • RELEVANCY SCORE 2.64

    DB:2.64:How Do I Print More Than One Photo A Page Using Windows Live Photo Gallery d9


    How do i print more than one picture on a page using windows live photo gallery?

    DB:2.64:How Do I Print More Than One Photo A Page Using Windows Live Photo Gallery d9

    First select all of the files you want to print,
    You can check the box on the top left of the thumbnails when you point at the files,

  • RELEVANCY SCORE 2.63

    DB:2.63:Officejet Pro K5400 Windows 7 X64. kz



    I have a Compaq running Windows 7 Home x64 and a HP Officejet Pro K5400 printer.

    When I tell the printer to print 10 or more pages the page count starts to skyrocket into the 1000's. I've tried multiple software programs (Word, Wordpad, Works, PrintShop) and all work fine if the copies is lower than 10. Even then when I printed a test page the system reported that it's going to print 6 pages, fortunately it only did 1, but when I print anything with 10 or more copies it continues past the 10 I requested.

    For example I have an invitation in Printshop (single sided a single page, with 1" margins), and I asked to print 10 pages, I had to stop the printer at page 25.

    What could be the issue??

    DB:2.63:Officejet Pro K5400 Windows 7 X64. kz


    I have a Compaq running Windows 7 Home x64 and a HP Officejet Pro K5400 printer.

    When I tell the printer to print 10 or more pages the page count starts to skyrocket into the 1000's. I've tried multiple software programs (Word, Wordpad, Works, PrintShop) and all work fine if the copies is lower than 10. Even then when I printed a test page the system reported that it's going to print 6 pages, fortunately it only did 1, but when I print anything with 10 or more copies it continues past the 10 I requested.

    For example I have an invitation in Printshop (single sided a single page, with 1" margins), and I asked to print 10 pages, I had to stop the printer at page 25.

    What could be the issue??

  • RELEVANCY SCORE 2.63

    DB:2.63:Diagnostic Page Prints Out After Each Print Job! xk



    I had to replace a printhead on HP Officejet Pro K5400. Now it prints out a diagnostic page each time I print something! Wasting ink and paper and time.

    What can I do?

    DB:2.63:Diagnostic Page Prints Out After Each Print Job! xk


    I had to replace a printhead on HP Officejet Pro K5400. Now it prints out a diagnostic page each time I print something! Wasting ink and paper and time.

    What can I do?

  • RELEVANCY SCORE 2.63

    DB:2.63:Css Tweak For Ie xp


    I have a print.css that works fine in FF, but only shows the
    first page in print preview for IE. Can someone tell me the tweak
    so IE will show and print all the pages if there is more than one
    page?
    I'm using DW8 on a PC FireFox 1.0.7
    Thank you
    vann

    DB:2.63:Css Tweak For Ie xp

    Hi Murray
    I have 2 inquiries going which I suspect may have something
    to do with each other. This one and one with Subject "Link from
    printer friendly icon". You are helping me with the other one
    already, but I'll put the link to the page here also, just in case.

    http://www.palettepeeps.com/index30.html

    Thanks for your help Murray!
    vann2

  • RELEVANCY SCORE 2.62

    DB:2.62:1051 All In One Printer xd



    When I print out more than one page some of my pages print out in a different language. For instance page 1 will print in english and pages 2 and 3 with print in dutch. How can I make all my documents print in the same language?

    DB:2.62:1051 All In One Printer xd

    Uninstall your drivers and software from the computer and re-install.If you do not have the CD, here is a link below that has the drivers.http://goo.gl/BVOOgLet me know if this helps, thanks.

  • RELEVANCY SCORE 2.62

    DB:2.62:My Hp Officejet Pro K5400 Doesn't Print Black Text Sends Out Blank Page Then A Page With Nnn On It fx



    I have windows xp. I am having problems getting the hp officejet pro k5400 to print text. I have installed a new black cartridge, cleaned heads. I finally got a self tesst diagnostic page, but printed in red. Any idea?????????

    DB:2.62:My Hp Officejet Pro K5400 Doesn't Print Black Text Sends Out Blank Page Then A Page With Nnn On It fx


    HI,

    Are you using orignal HP Cartridges or refilled cartridges , DId you change all the cartridges or which one did you change only.

    Regarsd,

  • RELEVANCY SCORE 2.62

    DB:2.62:K5400 Printhead Replacement 91



    I had to replace the black/yellow printhead on my K5400 officejet pro printer a couple of months ago for the first time since purchasing the printer a few years ago.

    The printhead appears to have gone again as the printhead light and power light are flashing. I've followed the manual and cleaned the heads, turned the power on off etc.; all the usual troubleshooting, but to no avail.

    Is it possible for the printhead to go again so quickly?

    I do do a lot of printing, but no more than I have done since purchasing the printer.

    I'm reluctant to fork out for another printhead if this is going to become a common problem, and would rather put the money towards a new printer, but in the meantime, I'm without a printer.

    DB:2.62:K5400 Printhead Replacement 91


    Ciara,

    No additional warranty. We purchased the printhead from an ebay seller in July this year.

    Since posting my initial message on here, we've purchased a printhead from HP the printer is working fine.

    Hope this one lasts a bit longer than its predecessor!

  • RELEVANCY SCORE 2.62

    DB:2.62:Multipe Page Report cf


    how to print one table data on one than more pages

    DB:2.62:Multipe Page Report cf

    Try setting the Page Break Before property of the repeating frame to Yes.

  • RELEVANCY SCORE 2.62

    DB:2.62:How To Make Report High 3.33 Inch Per Page(11g Report) 91


    Dear all,

    How to make report high 3.33 inch per page
    so if there are more than one page in the report it will start printing in the correct position on the next page,

    i make generate to PDF then print

    Thanks,

    Sakr

    DB:2.62:How To Make Report High 3.33 Inch Per Page(11g Report) 91

    Hello Sakr,

    This is a good question:

    You can visualize:

    http://1.bp.blogspot.com/_KYY-OV98iIo/S4-7ISbC5NI/AAAAAAAAAGw/bmelGzNg6UI/s1600-h/MainSection.bmp

    You can change Height that shows 11 in the visual aid.

    Mark Correct or Helpful !

    Edited by: New Yorker on Aug 26, 2011 11:40 AM

  • RELEVANCY SCORE 2.62

    DB:2.62:Hp Photosmart 7510 Always Prints Duplex If Printing More Than One Page kd



    HP Photosmart 7510using windows 7

    When ever printing more than one page, will print in duplex. Have checked all setting an dueplex is checked as NO.

    DB:2.62:Hp Photosmart 7510 Always Prints Duplex If Printing More Than One Page kd


    Hi,

    Please verify the following:

    Enter Control Panel Devices and Printers.Right click the printer icon and select Printing Preferences.Under the Layout tab, make sure the Print on both sides is set as None.
    Additionally, open the application used to print and verify the following:

    Click on file Print to launch the print dialog.

    Click the Print Options / Preferences button to access the Printing Preferences dialog (The same dialog as listed above).

    Make sure the Print on both sides is set as None as well (Unlike the previous setting, this one apply for the specific application only).

    Try printing and check for any change.

    If the same persists, please try printing from any other software (e.g. Word, Notepad, etc.) and check if the same behavior appears from other applications or not.

    Please let me know of any change,

    Shlomi

  • RELEVANCY SCORE 2.62

    DB:2.62:Unable To Print All My Documents sj



    I am unable to print all of my documents. If I print 1 document it works fine. I am trying to print a 7 page document and it will not print more than 2 pages. I am using too much ink to keep trying. Thanks

    DB:2.62:Unable To Print All My Documents sj


    Hi kmercer,Thank you for the information.When you're printing and this is occurring, is it from a specific program or file type? Have you tried others?Also, try updating the printers firmware. Here is a document to help with that: Getting the Latest Firmware and Printer Updates.Thank you for your reply.

  • RELEVANCY SCORE 2.62

    DB:2.62:Owa With Exchange Server 2010 Will Not Print A Full Email dx


    We have up graded to the Exchange Server 2010 and full emails cannot be printed in OWA. The emails are opened in their own window and still don't print more than one page. The email is cut off at one page.

    DB:2.62:Owa With Exchange Server 2010 Will Not Print A Full Email dx

    Hi,
    I’d suggest you try printing it with different web browsers.
    Regards,Rebecca Tu
    TechNet Community Support

  • RELEVANCY SCORE 2.62

    DB:2.62:Laserjet 1200 -- Cannot Print More Than One Page 9a



    New Dell Studio 1558 with Windows 7, 64 bit. My LaserJet 1200 will not print more than one page at a time. Also, my Officejet 6310 will not print photos or chart or tables. Also, I cannot print PDF docs. For the 1200, I've tried to use the disk to load the ddriveand get an error message. Have uninstalled and re-installed the drive 2x. I see questions about this in previous posts but no answers. Can someone help me out? Thank you.

    DB:2.62:Laserjet 1200 -- Cannot Print More Than One Page 9a


    New Dell Studio 1558 with Windows 7, 64 bit. My LaserJet 1200 will not print more than one page at a time. Also, my Officejet 6310 will not print photos or chart or tables. Also, I cannot print PDF docs. For the 1200, I've tried to use the disk to load the ddriveand get an error message. Have uninstalled and re-installed the drive 2x. I see questions about this in previous posts but no answers. Can someone help me out? Thank you.

  • RELEVANCY SCORE 2.61

    DB:2.61:Envy 4500 Printer Will Not Print More Than One Page Complete zx



    My new Envy 4500 will not print multiple page documents or multiple copies. It will usually print 1.5 pages and then quit mid page, and the queue will be empty as if it completed job. On very small jobs it will complete two pages. It seems to be related to memory as the smaller the document the more it will complete. I looked for printer properties to see if I could disable spooling to see if that would help, but the button to "print direct to printer" is grayed out. This problem happens when printing from adobe, or word, or intuit quickbooks.... I see lots of other people with the same or similar problems, but no answers.....

  • RELEVANCY SCORE 2.61

    DB:2.61:Cant Print More Than One Page Using Media Command On Internet Explorer 10 cd


    Original Title: IE 10 Prints the first webpage, then added 109 blank pages

    The @media print is used to print the page, it is below.

    DB:2.61:Cant Print More Than One Page Using Media Command On Internet Explorer 10 cd


    Hi Pakarate,

    I would suggest you to post the query on MSDN community forum as we have experts working on such issues. You can refer to the link:
    http://social.msdn.microsoft.com/Forums/en-US/iewebdevelopment/threads

    Do let us know if you have more queries on Windows.

    Found the bug in a script that was running to display google maps. Remove offending code.

  • RELEVANCY SCORE 2.61

    DB:2.61:I Cannot Print More Than 1 Page At A Time 97



    LaserJet CP1025nw

    I can't print more than on page at a time

    DB:2.61:I Cannot Print More Than 1 Page At A Time 97


    I hope you are doing well and welcome to the Hp forums;

    What OS are you using?

    If you are using windows please Run thisGo here utility

    let me the results I will do my bestto help if you need more assistance.

    Hope this helps;

    RobertoR

  • RELEVANCY SCORE 2.61

    DB:2.61:Have Info Wont Print More Than 1 Page Even Thought I Need3 78



    I have info which needs 3 to 4 pages. It will only print 1 - I have tried many things. print \
    preview will only show 1 page regardless of how many I need. Please help.

    DB:2.61:Have Info Wont Print More Than 1 Page Even Thought I Need3 78

    Question owner


    Glad you have a sense of humor. I needed directions from carlsbad ca to la jolla ca through mapquest - specifically pannikins . Hope that is specific enough. Thanks

  • RELEVANCY SCORE 2.60

    DB:2.60:How Can I Print More Than The First Page Of A Message sp


    Since I changed from Explorer to Outlook, the Print operation will print only the first page of a long message. So, I have to copy the remaining pages to a WORD document in order to obtain a printed copy.

    DB:2.60:How Can I Print More Than The First Page Of A Message sp

    Did you check the printer properties and the page options in the print dialog? That is where pages are controlled.

  • RELEVANCY SCORE 2.60

    DB:2.60:Hp Officejet Pro K5400 Printer Will Sometimes Skip Or Not Completely Print Images... ss



    Recently I have discovered my HP Officejet Pro K5400 printer will sometimes skip or not completely print images from Microsoft Publisher. Now, I have used this printer with the same version of Publisher since 2008 and never had an issue until the last month or so.

    So far I have not discovered any issues with either Word or Publisher printing text. The issue seems isolated to printing inserted images and photos. Say for example, I have a Publisher document with eight images (say about 2.5 x 3.5) on a 8.5 x 11 landscape orientated page (arranged 4 images across and 2 deep). When I print the page I might get 6 or 7 images printed normally but 1 or 2 will start but stop and get cut off. About 90% of the time if the image on top gets cut off at a certain point, so will the image below it but then roughly 10% of the time either the top or the bottom will get cut off but the other will print fine.

    I have tried a variety of different images and photos and in most cases whenever I tend to want images to fill most of a page, I will find areas where the printer skips and won't print the entire image. The places where the printer chooses to stop printing an image is not always in the same places but always seem to happen between the middle of the page and right hand margin.

    Any help would be greatly appreciated.

    DB:2.60:Hp Officejet Pro K5400 Printer Will Sometimes Skip Or Not Completely Print Images... ss


    Recently I have discovered my HP Officejet Pro K5400 printer will sometimes skip or not completely print images from Microsoft Publisher. Now, I have used this printer with the same version of Publisher since 2008 and never had an issue until the last month or so.

    So far I have not discovered any issues with either Word or Publisher printing text. The issue seems isolated to printing inserted images and photos. Say for example, I have a Publisher document with eight images (say about 2.5 x 3.5) on a 8.5 x 11 landscape orientated page (arranged 4 images across and 2 deep). When I print the page I might get 6 or 7 images printed normally but 1 or 2 will start but stop and get cut off. About 90% of the time if the image on top gets cut off at a certain point, so will the image below it but then roughly 10% of the time either the top or the bottom will get cut off but the other will print fine.

    I have tried a variety of different images and photos and in most cases whenever I tend to want images to fill most of a page, I will find areas where the printer skips and won't print the entire image. The places where the printer chooses to stop printing an image is not always in the same places but always seem to happen between the middle of the page and right hand margin.

    Any help would be greatly appreciated.

  • RELEVANCY SCORE 2.60

    DB:2.60:When I Print A Web Page It Only Prints The First Page And Not The Rest Of The Web Page Below The Page Break. kd



    When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
    How can I change the settings so that it will print more than on page?

    DB:2.60:When I Print A Web Page It Only Prints The First Page And Not The Rest Of The Web Page Below The Page Break. kd


    When I print a web page firefox will only print the first page, all of the content to the first page break and nothing past that.
    How can I change the settings so that it will print more than on page?

  • RELEVANCY SCORE 2.60

    DB:2.60:Officejet 4635, Page Does Not Print Completely. zx



    If I have more than one page the first or second page may print but then the third page will print partially and then stop. I can usuall go back and get one page to rpint at a time but it doesn't print the mulitples.

    I don't think the problem is with set up or installation becasue it worked fine for a week or so, but not now.

    DB:2.60:Officejet 4635, Page Does Not Print Completely. zx


    An update: I actually installed the cd the printer came with on the laptop I was using to print wirelessly. It's been printing "normal" ever since.

  • RELEVANCY SCORE 2.60

    DB:2.60:I Only Receive The First Page When I Print An E-Mail That Has More Than 1 Page pp


    When I print an e-mail that has more than 1 page, only page 1 prints

    DB:2.60:I Only Receive The First Page When I Print An E-Mail That Has More Than 1 Page pp

    Hi,

    What are the detailed steps that you did in printing your emails? Have you check if the settings on your printer is correct?

    Thank you.

  • RELEVANCY SCORE 2.60

    DB:2.60:Hp Officejet Pro 8600 Plus Will Not Print More Than 1 Page From New Windows 8 Laptop sz



    My printer (nearly new) was working well with my old laptop. I purchased a new Windows 8 laptop, and cannot print more than one page at a time (the last page of a document). The laptop has the printer set as the default. It shows an error message which reads "Error-Sent to Printer". I believe the issue is the printer, but cannot figure out how to fix it. Thanks for any help.

    DB:2.60:Hp Officejet Pro 8600 Plus Will Not Print More Than 1 Page From New Windows 8 Laptop sz


    Hello DanikaC,

    I would like you try HP Print and Scan Doctor,a free utility (tool) ,that helps to quickly resolve common printing, scanning and connectivity issues.

    http://h10025.www1.hp.com/ewfrf/wc/document?cc=uslc=endocname=c03286146#N235

    Cheers,

    Bryan

  • RELEVANCY SCORE 2.60

    DB:2.60:Officejet K5400 Driver Problem ff



    I'm very upset at the shortcomings of this K5400 printer.

    After many years of great printing, I decited to upgrade my company's old HP2000 printers. I got one K5400 as a test and although it works very well, it will not print MSworks files. The program MSworks gives an error "out of memory" every time I try to print something.

    I have several hundred files and spreadsheets in this format and converting them is not an option at this time.

    The computer it's connected to is Windows XP SP2 (32bit) with all current updates.

    The reason why I'm convinced it's the driver is that it prints when I manually set it up with a windows supplied driver for a HP deskjet 550C. It works with that driver, but it works very poorly, the colors are all washed out and the print speed is slow.

    Also even having the K5400 printer set as default will cause the program to give an error, and that also leads me to believe it is the driver.

    Typically when I select File/print, I get an option to select what printer to use but when I have the K5400 printer set as default I get the memory error before I can even select the printer to use.

    I have other "virtual" printers like PDF factory, FinePrint, WinFax, and they all work fine. I don't see how a printer (K5400) could have a problem printing somthing that Windows and all the other virtual printers have no trouble with.

    I have removed all the HP software and drivers, used the cleanup tool and installed the drivers only from the enterprise download and that didn't help.

    I also un-installed and re-installed MS works and that didn't help.

    I have searched the forum here and I see some topics about driver problems and one person having a very similar problem with Word, but I still can't find an acceptable solution.

    I welcome any help or suggestions I can get.

    Does HP plan on looking into the driver problems for this printer? I see many unanswered topics with users having trouble.

    Would anyone know of an older windows certified driver that may work better than the Deskjet 550C that may work a little better?

    Thank you in advance for any help you can give me.

    Dave

    DB:2.60:Officejet K5400 Driver Problem ff


    I guess I should have mentioned that the system is not really out of memory. The system has 2Gb of RAM and plenty of availible memory.

    Thinking that maybe it was a conflict between the driver and a running task or some other software conflict, I tried it today on a laptop I have.

    I imaged the laptop so I could easily restore it and then performed a clean install of Windows XP SP3.

    I installed MSworks and the k5400 minimal drivers and got the exact same error, exact same problem.

    I had a newer version of works that I never used, so as a test I removed the older version from the laptop and installed the newer version of works and quess what happened?

    Same problem, "out of memory" error. However, with the newer version I was able to actually print works documents the error now is only for spreadsheets.

    However, I still need to be able to print works spreadsheets and converting everything to a newer version of works still won't help.

    I also tried it on another system I have running windows 7 beta.

    Same problem, same error.

    Trying to print a spreadsheet over the network from other systems doesn't work either.

    Am I to assume that HP printers are no longer compatable with all software for windows?

    I can "print" these spreadsheets to PDF Factory, Fine Print, Winfax, OneNote, my old HP2000 printers, but not a new K5400 printer?

    If I can't find an acceptable solution to this I'm going to need to purchase another printer and as I pointed out this first printer was purchased as a test and I'll have to assume that all new HP printers will give me the same problem unless someone can tell me it's only with this model.

    I'm hoping for some support here please

    Dave

  • RELEVANCY SCORE 2.59

    DB:2.59:Unable To Print Out More Than The 1st Page Of Any Email That Contains More Than One Page. xm


    Only able to print outthe 1st page of any received email that contains more than one page.

    DB:2.59:Unable To Print Out More Than The 1st Page Of Any Email That Contains More Than One Page. xm

    IF you are referring to Outlook.com please follow the below...

    For Outlook interface:

    1. Go to yourinbox

  • RELEVANCY SCORE 2.59

    DB:2.59:My Color Laserjet 5500 Dn Does Not Print More Than 1 Copy Of A 4 Page Document Correctly jm



    The first copy comes out properly when I tell it what pages to print and in what order. Any copies printed after the first one will print the same page on both sides of the 11x17" page. What parameters do I need to set to get this printer to print multiple copies of the document properly? I'm printing a newsletter from the MS Publisher program.

    DB:2.59:My Color Laserjet 5500 Dn Does Not Print More Than 1 Copy Of A 4 Page Document Correctly jm


    The first copy comes out properly when I tell it what pages to print and in what order. Any copies printed after the first one will print the same page on both sides of the 11x17" page. What parameters do I need to set to get this printer to print multiple copies of the document properly? I'm printing a newsletter from the MS Publisher program.

  • RELEVANCY SCORE 2.59

    DB:2.59:Top Margin Too Small On Officejet Pro K5400 p9



    Whenever I print unformatted text such as emails or a simple taxt page, the top margin provided by the printer is too small. In case of emails it is especially annoying since ot omits part of the header information. The problem persists whether I am using Windows or Linux.

    I have not found any solution for this problem as yet, therefore I ask the community for assistance.

    Thank you very kindly for your assistance.

    DB:2.59:Top Margin Too Small On Officejet Pro K5400 p9


    Hi eric-g,

    The email address is not personal, it is a business contact email.

    It is known to thousands of people, (That includes the NSA.) (Joke)

    Does HP have a forum where businesses can communicate?

    I appreciate your concern for my privacy, and the rules, but in this case, they do not apply.

    Now to the problem.

    We have four HP printers from the HP Officejet Pro series that use the 88 series printhead and ink.

    They are a K550, a K5400, a L7590, and a K8600.

    Only the K550 is absolutely reliable.

    When the others have problems, it is cheapest to dump the printer, and buy another one on Ebay.

    This is a tremendous environmental waste, when most of the problems are in the paper path.

    I appreciate that you are a moderator, and it appears, not a technician or engineer, so please forward this request.

    I am looking for the technicians manuals for these printers.

    This should allow more rapid emergency repair on weekends, etc.

    The information provided on the HP website is too fluffy, and the website suggestions do not work for serious problems in the paper path.

    This leads to environmental damage, as previously stated.

    Regards, Chris

  • RELEVANCY SCORE 2.59

    DB:2.59:Will The Hp Officejet Pro K5400 Work As A Network Printer? m3



    I have the k5400 with the usb connection. Can I connect it to my router and set it up as network printer?

    DB:2.59:Will The Hp Officejet Pro K5400 Work As A Network Printer? m3


    I have the k5400 with the usb connection. Can I connect it to my router and set it up as network printer?

  • RELEVANCY SCORE 2.59

    DB:2.59:Trouble With 946aio Not Printing More Than 1 Page jx


    If I try to print more than one page documents at a time- the first page usually will print fine but the 2 and 3 pages get lighter and lighter the more I print. I have plenty of ink and I have cleaned the  ink heads and realigned as per maintence instructions. This also happens with scanning and printing.

    DB:2.59:Trouble With 946aio Not Printing More Than 1 Page jx

    If I try to print more than one page documents at a time- the first page usually will print fine but the 2 and 3 pages get lighter and lighter the more I print. I have plenty of ink and I have cleaned the  ink heads and realigned as per maintence instructions. This also happens with scanning and printing.

  • RELEVANCY SCORE 2.59

    DB:2.59:Hp K5400 Print Problem - Streaking, Not Printing Black 1s



    I have a K5400 printer that was streaking in all colors slightly, but mostly in black. Black sometimes would not print at all. All cartridges are HP brand and have a good level of ink. I thought maybe since it was the black, I bought a brand new black cartridge today and I cannot get any black to print. When I try to print a test page, I can see the windows logo in red, green blue and yellow, then below I can see faintly a bit of yellow ink here and there, and that's it.

    Hopefully I didn't just waste $25 on this printer. Any ideas what to do other than throw it out the window and get an Epson?

    DB:2.59:Hp K5400 Print Problem - Streaking, Not Printing Black 1s


    Hello,

    I have just joined on the basis I was having a similar problem. Did you get any answers?

    Cheers,

    NWF

  • RELEVANCY SCORE 2.59

    DB:2.59:My Printer Prints Only One Page d7



    under Windows 7 my HP Officejet PRO K5400 print only the last page in case of PDF document with many pages.

    DB:2.59:My Printer Prints Only One Page d7


    under Windows 7 my HP Officejet PRO K5400 print only the last page in case of PDF document with many pages.