• RELEVANCY SCORE 3.92

    DB:3.92:Appletv In Corporate, Wpa2-Enterprise Wifi Networks k7




    Hello,I would like to use AppleTV in my institution's corporate WPA2 secure wifi network, in order to mirror my iPad. I am looking for a stable solution. iOS devices require the installation of a profile. I have tried to install a profie in an AppleTV (2nd generation). I don't think the profile "stuck". Should a profile stay in the AppleTV, would iOS devices "see" the Apple TV across the secure network? Also, I've read that the problem is that first time the AppleTV tries to connect to the internet, it tries to set date and time, and it remains in there in a loop unless it sets it from a wired connection (then, it can connect to the wifi network)Another solution would be using an Airport Express to distribute dynamic IP's to the AppleTV and the iOS devices. But, can a WPA2-enterprise profile be installed permanently in Airport Express?Linking the AppleTV or the Airport Express to ethernet (RJ45 cable) is not viable: those are fixed IP's which must remained assigned only to desktop computers. The solution must be wifi to wifi.I would greatly appreciate any suggestions.Thank you very much,-celso

    DB:3.92:Appletv In Corporate, Wpa2-Enterprise Wifi Networks k7

    Hello,I would like to use AppleTV in my institution's corporate WPA2 secure wifi network, in order to mirror my iPad. I am looking for a stable solution. iOS devices require the installation of a profile. I have tried to install a profie in an AppleTV (2nd generation). I don't think the profile "stuck". Should a profile stay in the AppleTV, would iOS devices "see" the Apple TV across the secure network? Also, I've read that the problem is that first time the AppleTV tries to connect to the internet, it tries to set date and time, and it remains in there in a loop unless it sets it from a wired connection (then, it can connect to the wifi network)Another solution would be using an Airport Express to distribute dynamic IP's to the AppleTV and the iOS devices. But, can a WPA2-enterprise profile be installed permanently in Airport Express?Linking the AppleTV or the Airport Express to ethernet (RJ45 cable) is not viable: those are fixed IP's which must remained assigned only to desktop computers. The solution must be wifi to wifi.I would greatly appreciate any suggestions.Thank you very much,-celso

  • RELEVANCY SCORE 3.35

    DB:3.35:How To Connect To Wpa2-Eap Enterprise x3





    Connect to WPA2-EAP ent wifi networks is not working. Any solutions?

    DB:3.35:How To Connect To Wpa2-Eap Enterprise x3


    Yeah that's Sony Ericsson. No Customer Relationship at all.

    And because SE doesn't seem to change, all we can do is change the brand and never buy SE again.

  • RELEVANCY SCORE 3.31

    DB:3.31:Lumia 520 Wifi Wpa2 Enterprise jp




    Hi. I have the Nokia Lumia 520 and at my school they use a wifi connection in WPA2 Enterprise. How come my phone wont connect to the wifi? Doesnt this phone support that type of wifi?

    DB:3.31:Lumia 520 Wifi Wpa2 Enterprise jp

    paulheu wrote:

    It will come in WP 8.1

    WPA-Enterprise is there already (EAP-SIMwhich is operator based and PEAPv0/EAP-MSCHAPv2 which is Microsoft based). With Windows Phone 8.1, EAP-TLS was added, not used in school or universities normally, because it involves an (individual/personal) client certificate to be installed on each device of the user. Did you hear about more EAP types which got added?
    DevinMN wrote:
    My school they use a wifi connection in WPA2 Enterprise.
    We need more details …
    wisky_basha wrote:

    What should I do to connect secure Wifi on my Nokia Lumia 720.

    In your case, because you know the EAP types already, thereyou go …

  • RELEVANCY SCORE 3.16

    DB:3.16:Wifi Issue With Wpa2 Enterprise 39


    I am trying save the setting for iPhone 4s WPA2 Enterprise setting, but it always gets ended once i trun off the wifi, can anyone suggest the workaround for this issue.

    DB:3.16:Wifi Issue With Wpa2 Enterprise 39

    I am trying save the setting for iPhone 4s WPA2 Enterprise setting, but it always gets ended once i trun off the wifi, can anyone suggest the workaround for this issue.

  • RELEVANCY SCORE 3.15

    DB:3.15:Trying To Connect Ipads To Corporate Wifi ax


    Hello, I hope someone here can point me in the right direction. Here is the overview of what I'm trying to setup. -Microsoft enterprise network, with 2008R2 NPS(RADIUS) server, and 2008R2 CA server, full Microsoft Active Directory environment-Cisco WiFi wireless LAN controllers and APs. Already have corporate laptops utilizing the WiFi and connecting, using 802.1x-Maas360 server setup and configured for iOS devices as my MDM solution.-Have succesfully enrolled the iPAD into MDM, it got the certificate and profile information as best as I can tell. I can do remote whipe of the device and control it.Here is the part I can't get workingI can't get the iPAD to conenct to the corporate WiFi when I turn on 802.1x authentication. When I go int the WiFi configuration settings for the SSID and turn off all authenciation, the iPAD connects and it's working. So I know that piece is working OK. But when I turn on the authentication with WPA/WPA2, with 802.1x autentication, I get prompted for username and password when I try to connect to the SSID. The problem is I can't get it to let me authenticate and connect. Not knowing exactly what it wants, I have tried DOMAIN\Username with password and also, Username with password. I'm guessing the part that is not configured correctly is the 802.1x authentication going to the RADIUS server and validating the user. But I don't what needs to be configured for that for an iOS device. Any help would be greatly appreciated.

    DB:3.15:Trying To Connect Ipads To Corporate Wifi ax

    Oh nice, thanks for those, that is very handey when troubleshooting and testing.

  • RELEVANCY SCORE 2.96

    DB:2.96:Wpa And Wpa2-Enterprise Connection Problem dj


    Couple of days ago when i was logged to my university network it suddenly dropped connection. Since then i cannot connect to wifi nor WPA2-Enterprise nor WPA-Enterprise. Wifi itself isnt a problem because my friends can connect without problems. I already talked with administrators of network and im sure that configuration is good. I had no problems with connection earlier + i have no problems to connect my home networks that works on WPA-Personal. Main problem is that when i try to connect to WIFI (which Signal Strengh is good) it isnt asking for my login nor password just drop error after few secs. My wifi adapter is Intel PRO/Wireless 3945ABG and i already updated driver to ver 13.0.0.107 which didnt help. My windows ver is Windows 7 Premium 32bit. Ask if You need any additional info if you are willing to help me solve my problem.

    DB:2.96:Wpa And Wpa2-Enterprise Connection Problem dj

    hi there

    On a coincidence note i too ran the sfc /scannow command and managed to finally connect using wpa-enterprise with tkip.

    thanks for the tip, much appreciated.

    EDIT: it seems to have worked on an intel wireless card, but not on a Atheros, either that or the problem was the first machine had Win7 ultimate and the later had Win7 Home Premium, not really sure, must investigate further.

  • RELEVANCY SCORE 2.95

    DB:2.95:Wifi Association Issues kx



    I am using my BB 9800 Torch to connect to various WIFI networks, at home a WPA/WPA2 personal security type network with no issues.

    At work I connect to a WPA/WPA2 Enterprise PEAP connection with EAP-MS-CHAPv2 enabled. As soon as I try to connect to this network, I get a "failed to associate with the network error" Looking at the logs of the wifi solution we can see that the authentication is not passes from the phone to the Wifi AP. If I troubleshoot futher and do a Wi-Fi diagnostics test i get the following error: "Status: Device failed to associate with AP"

    I would appreciate if anybody can assist me with this problem

    Regards

    DB:2.95:Wifi Association Issues kx


    I finally manage to get hold of a Blackberry Bold with OS5 on it, after updating the firmware to the latest available firmware of version 6 for the device, I connected to the wifi without any issue. After looking at the software versions, I detected that the Blackberry Bold has a newer version of Blackberry 6.

    Here is a summary of the device software on the Blackberry 6, that works with the aforementioned WIFI.

    BlackBerry® 9700smartphone (3G, Wi-Fi)6.0 Bundle 1879 (v6.0.0.448, Platform 6.6.0.124)3G Bands 1,4,8Cryptographic Kernel v3.8.6.5Branding Version: 1.0.173.544NMicro Edition Configuration: CLDC-1.1Micro Edition Profile: MIDP-2.1Micro Edition JTWI Version: 1.0Micro Edition Media Version: 1.1Micro Edition PIM Version: 1.0Micro Edition File Version: 1.0Micro Edition Bluetooth Version: 1.1Micro Edition Location Version: 1.0.1Micro Edition Security and Trust Services (APDU) Version: 1.0WLAN Version: 4.3.0.22www.blackberry.comCopyright © 1997-2010Research In Motion Limited.All rights reserved.Portions of the browser are copyright 4thpass.The RIM and BlackBerry families of related marks, images and symbols are the exclusive properties and trademarks of Research In Motion Limited. RIM, Research In Motion, and BlackBerry are registered with the U.S. Patent and Trademark Office and may be pending or registered in other countries.

    Here is a summary of my device (BB torch) software on the Blackberry 6, that does not work with the aforementioned WIFI.

    BlackBerry® 9800smartphone (3G, Wi-Fi)6.0 Bundle 695 (v6.0.0.246, Platform 6.4.0.105)Cryptographic Kernel v3.8.6.5Branding Version: 1.0.168.373HMicro Edition Configuration: CLDC-1.1Micro Edition Profile: MIDP-2.1Micro Edition JTWI Version: 1.0Micro Edition Media Version: 1.1Micro Edition PIM Version: 1.0Micro Edition File Version: 1.0Micro Edition Bluetooth Version: 1.1Micro Edition Location Version: 1.0.1Micro Edition Security and Trust Services (APDU) Version: 1.0WLAN Version: 4.2.0.38www.blackberry.comCopyright © 1997-2010Research In Motion Limited.All rights reserved.Portions of the browser are copyright 4thpass.The RIM and BlackBerry families of related marks, images and symbols are the exclusive properties and trademarks of Research In Motion Limited. RIM, Research In Motion, and BlackBerry are registered with the U.S. Patent and Trademark Office and may be pending or registered in other countries.

    Please advice what to do....

  • RELEVANCY SCORE 2.94

    DB:2.94:Wifi Connectivity To Wpa-Enterprise. cz


    Trouble connecting to WPA-Enterprise WIFI on Nokia Lumia 800(WP7.5).Access point gets detected, but doesn't connect because default type is set to WPA2-ENT. cant edit this option too. any work around?

    DB:2.94:Wifi Connectivity To Wpa-Enterprise. cz

    Trouble connecting to WPA-Enterprise WIFI on Nokia Lumia 800(WP7.5).Access point gets detected, but doesn't connect because default type is set to WPA2-ENT. cant edit this option too. any work around?

  • RELEVANCY SCORE 2.89

    DB:2.89:How Can I Use Wpa2 Enterprise On Apple Tv 3g? km


    I'm teacher..and our school has wifi by wpa2 enterprise authentication.How can I connect wpa2 enterprise on apple tv 3G?Is there any profile? please help me!!

    DB:2.89:How Can I Use Wpa2 Enterprise On Apple Tv 3g? km

    Hi stuartj257,We followed the steps and when we try to connect to our enterprise security wpa2 network we get a error message that says "your password is incorrect" with an error code of 9003. Our password is correct...no problem with same password connecting with iPhone. Just when we try Apple TV? Any thoughts/suggestions?Thanks in advance!mz

  • RELEVANCY SCORE 2.81

    DB:2.81:My Appletv Is Not Showing Wifi Networks Available, My Iphone And Ipad Do Show The Networks.&Nbsp; What Could Cause This? 8j


    I have apple tv at home and it saw my wifi network and set up was easy. I immediately mirrored my iPad to my TV which was my desire. I bought another apple tv for my office, different wifi network, and this appletv does not show wifi networks.

    DB:2.81:My Appletv Is Not Showing Wifi Networks Available, My Iphone And Ipad Do Show The Networks.&Nbsp; What Could Cause This? 8j

    I have apple tv at home and it saw my wifi network and set up was easy. I immediately mirrored my iPad to my TV which was my desire. I bought another apple tv for my office, different wifi network, and this appletv does not show wifi networks.

  • RELEVANCY SCORE 2.80

    DB:2.80:Disable Wifi When Lan Is Detected?? 3j


    Is it possible to have OSX disable WiFi when the LAN is detected.
    This is to prevent bridging of networks by users and compromising security on the corporate network

    DB:2.80:Disable Wifi When Lan Is Detected?? 3j

    In theory, Marco Polo could do this. Some people love it but it always seems to be just not quite what I needed.

  • RELEVANCY SCORE 2.80

    DB:2.80:Thread: Wpa2 Wireless For Android Devices? 8k


    Hi,

    did anybody find a way to distirbute a WPA2 Wireless network for Android devices?

    (Organization - Android Corporate Ressources - WiFi network).

    i just do not to find the WPA2..

    kind regards

    Gerd Zobel

    The NetWorker GmbH

    www.the-networker.de

    DB:2.80:Thread: Wpa2 Wireless For Android Devices? 8k

    never try that, but Android has only one config for both: WPA and WPA2. I think, if you deploy only WPA-Settings and the Accesspoint is configured with WPA2, the device should select this.

    Same if you look at IOS-Policies in MDM. Only WPA/WPA2.

    Heiko

  • RELEVANCY SCORE 2.79

    DB:2.79:Problems Connecting Via Wpa/Wpa2 Enterprise After Upgrade To 10.6 9x


    I've seen this on a couple of Macs; a MacBook will work fine connecting to an enterprise WiFi network using either WPA or WPA2 Enterprise. After upgrading from either 10.4 or 10.5 to Snow Leopard these protocols cease to work properly. The upgraded MacBook can connect to WPA or WPA2 Personal networks but nothing involving 802.1x based authentication (This includes the use of LEAP). It looks as if the credentials being passed on to the RADIUS server are incorrect - the authentication server is rejecting the client provided credentials. Despite efforts to manually log in (bypassing any saved preferred network configurations) and deleting all saved preferred networks nothing works. Suggestions?

    DB:2.79:Problems Connecting Via Wpa/Wpa2 Enterprise After Upgrade To 10.6 9x

    A new location was tried but didn't change anything.

    We encountered a mix. Some macbooks were simply "upgraded" and a couple were redone with fresh installs after an "upgrade" produced the problem.

  • RELEVANCY SCORE 2.78

    DB:2.78:Wifi: Is 802.1x (Peap) Over Wep Possible? cx


    I believe this is why I cannot connect to my univeristy, which uses WEP encryption (not WPA/WPA2) with 802.1x cert authentication.

    Within the 802.1x settings, the first setting I must input is the WPA/WPA2, for which I use EAP and proceed to configure the EAP-PEAP.

    But, these settings are all under the headship of WPA/WPA2, so I assume that 802.1x authentication cannot connect with networks that use either no encryption or WEP, correct? Or, is the phone smart enough to recognize and use WEP anyway?

    DB:2.78:Wifi: Is 802.1x (Peap) Over Wep Possible? cx

    OK, found it must be possible because it now works. I had enabled all the PEAP versions (v0, v1, and v2). When I disabled v1 and v2 leaving v0 enabled, voila!

    It seems there is a bug where the client attempts the highest version first, but then doesn't attempt the next lowest version when the first fails.

  • RELEVANCY SCORE 2.74

    DB:2.74:Windows 8 - Manual Wifi Creation Dont Work f1


    Running windows 8 preview on Acer W500, facing issue while connecting to my company external wifi network
    Details: ckick on other network
    enter SSID : test
    click username and password
    enter user name
    enter password
    click ok
    Issue: screen comes back asking to click for username and password or certificate
    I am able to connedct to this SSID with my IPAD successfully, other wifi networks just fine, only manual network has issue (doesn't even come to a screen asking for WPA2 enterprise)Prakash Heda | Sr Infrastructure DBA | Advent Software | http://www.sqlfeatures.com

    DB:2.74:Windows 8 - Manual Wifi Creation Dont Work f1

    My first suggestion would be to make sure that a compatible driver was installed for the wireless device.
    I've had Windows 8 running on various hardware and I've had consistent problems with connecting at work, which is a hidden 802.1x network. I was finally able to get connected but the procedure I have to go through is slightly convoluted.
    I must alway s manually reconnect, the computer will not connect on it's own. I have to select Other Network and enter the name of the network. The computer will then prompt me for the WEP key (and there isn't a WEP key, I use my user name and password
    to connect). So I hit cancel. After that it may connect. If it doesn't I go through the procedure again. Eventually it connects.Joel Ivory Johnson |
    http://www.j2i.net | Windows Phone Developer MVP

  • RELEVANCY SCORE 2.74

    DB:2.74:Ht1126 Wpa/Wpa2 Enterprise k3


    When would one select WPA/WPA2 Enterprise WPA2 Enterprise instead WPA2 Personal?

    DB:2.74:Ht1126 Wpa/Wpa2 Enterprise k3

    When would one select WPA/WPA2 Enterprise WPA2 Enterprise instead WPA2 Personal?

  • RELEVANCY SCORE 2.74

    DB:2.74:Thread: Novell Client, Windows 7, Wpa2-Enterprise px


    Hello,

    in our organization we use WPA2-Enterprise in wireless network. Users credentials in WiFi are the same as in eDirectory. We would like to know if there is any way we can login in WiFi and than in eDirectory when the user is logging in Novell Client form?

    We were trying to test 802.1X feature in Novell Client, but after enabling this feature we couldn\'t connect to our WiFi network.

    Does the novell client support 802.1X authentication for WPA2-Enterprise WiFi network?

    DB:2.74:Thread: Novell Client, Windows 7, Wpa2-Enterprise px

    Actually, I see it says explicitly on that page





    the Novell Client for Windows supports only PEAP with MSCHAPv2



    so not supported as yet it seems. You could log an enhancement request for this feature to be added http://support.novell.com/enhancemen...v5_enhancement

  • RELEVANCY SCORE 2.73

    DB:2.73:X201 Wifi Problem 3k


    Hello!My X201s notebook has troubles with connecting to WiFi networks with WPA/WPA2 security. Wireless adapter is Intel WiFi link 1000BGN. After trying to connect it shows me connection errorBut it connects no-security networks and networks with WEP security on same wireless router.This problem repeats under Windows 7 Pro and Ubuntu Linux 10.10 installed on this notebookDo you have solution?

  • RELEVANCY SCORE 2.73

    DB:2.73:Wpa2 Enterprise Support For Wifi? 38



    I just got the Motorola Droid. I love it! One tiny little glitch that I've found is that I need WPA2 Enterprise support in order to get Wifi at my office (like all of the iPhone users I work with, and I think the Blackberry users as well.)

    From what I've found online, it appears that this is a GUI issue. There is support, but it's not exposed through the Wifi setup menus. There are apps that support WPA2 Enterprise, but they require a "rooted" phone - so that's not going to work for me.

    Does anyone know of another route, or any plans to provide WPA2 Enterprise?

    Thanks,

    - Kevin

    DB:2.73:Wpa2 Enterprise Support For Wifi? 38


    I just got the Motorola Droid. I love it! One tiny little glitch that I've found is that I need WPA2 Enterprise support in order to get Wifi at my office (like all of the iPhone users I work with, and I think the Blackberry users as well.)

    From what I've found online, it appears that this is a GUI issue. There is support, but it's not exposed through the Wifi setup menus. There are apps that support WPA2 Enterprise, but they require a "rooted" phone - so that's not going to work for me.

    Does anyone know of another route, or any plans to provide WPA2 Enterprise?

    Thanks,

    - Kevin

  • RELEVANCY SCORE 2.73

    DB:2.73:Nokia N8 Wifi Wpa2 Enterprise With No Authenticati... cz



    The company I work at has a WPA2 Enterprise wifi, MSCHAPv2 authentication with no authentication certificate. I cannot connect my Nokia N8, the respons is "Auhtentication failed"
    Some of my colleagues have Android phonesand they have no problems connecting.

    Settings on my Nokia N8 are:
    WLAN Security Settings:
    WPA/WPA2 - EAP

    EAP Plugin Settings

    Allow EAP-TTLS
    Personal Certificate - not defined
    Authority Certificate - not defined
    User Name - user defined
    Realm In Use -Domain\username
    Realm

    EAP-MSCHAPv2
    User Name - username
    Prompt Password - Yes
    Password - ****

    Anyone have a solution on how to connect a Nokia phone to a WPA2 Enterprise with no authentication certificate?
    Thanks

    DB:2.73:Nokia N8 Wifi Wpa2 Enterprise With No Authenticati... cz


    Just double Click on the certificate, then you can continue with the wizard

  • RELEVANCY SCORE 2.73

    DB:2.73:Mfi Wifi Connection To Wpa2 Enterprise jd



    Hello,

    I'm trying to configure some mport to connect to our wpa2 enterprise network (based on unifi products + radius).

    I've not found any documentation or topics about that and I didn't get it working, is there anyone using this type of connection with mports ?

    Thank you

    Bye

    Flavio

    DB:2.73:Mfi Wifi Connection To Wpa2 Enterprise jd


    Hello,

    I'm trying to configure some mport to connect to our wpa2 enterprise network (based on unifi products + radius).

    I've not found any documentation or topics about that and I didn't get it working, is there anyone using this type of connection with mports ?

    Thank you

    Bye

    Flavio

  • RELEVANCY SCORE 2.73

    DB:2.73:Lumia 620 Not Connecting To Wpa2 Enterprise Wifi Need Urgent Help 3m


    my lumia 620 is not connecting to wpa2 enterprise wifi after entering the credentials it shows counldnt find the network............need immediate assistance

    DB:2.73:Lumia 620 Not Connecting To Wpa2 Enterprise Wifi Need Urgent Help 3m

    Hello PraveenVarma.

    Thank you for posting in the community.

    Have you tried to contacts you company system administrator for proper settings?

    Can other your colleagues connect to wpa2?

    Regards,
    Maria

  • RELEVANCY SCORE 2.72

    DB:2.72:Secure Guest Wifi Using Wpa2 88



    A couple of years ago i asked if it was possible to connect 2 separate networks by using a guest anchor controller (https://supportforums.cisco.com/message/1309100)

    The idea being we can replicate the other networks wifi settings over our wireless infrastructure without the need of installing a second wave of access point just to provide a new SSID, and allowing us the freedom and flexibility to deploy this 2nd network where needed.

    We need to use WPA/WPA2 with radius authentication with the radius server living on the second network.

    We already have a DMZ between the two networks and are planning to put the anchor controller on the DMZ.

    Has anyone tried this sort of configuration and can offer any tips?

    regards,

    Adam

    DB:2.72:Secure Guest Wifi Using Wpa2 88


    Yep

    I hope the info has been informative for you.

    Regards

    ---------------------------------------------------------------------

    Please don't forget to rate correct answers

  • RELEVANCY SCORE 2.72

    DB:2.72:Wifi Wpa2-Enterprise Support On Nokia Asha 311 p8



    Current SW version: V05.92 RM-714

    I will be greatful to nokia if they can addWPA2-Enterprise support for WiFi in the Asha 311.

    Currently is just shows the list of networks , but when trying to connect to aWPA2-Enterprisenetwork it displays "Cannot use network unsupported security type".

    Thank you for reading.

    DB:2.72:Wifi Wpa2-Enterprise Support On Nokia Asha 311 p8


    09680, again, Nokia Discussions are not a board for feature requests. Furthermore, with the Nokia 210, Nokia added support for EAP-SIM in the Series 40 operating system. Anyway, I guess you are better of with a Nokia 700 which uses Nokia Belle (Symbian) as operating system. Nokia Belle has a quite complete WPA-Enterprise support. By the way as there are so many different configurations out there, which EAP type(s) do you need?

  • RELEVANCY SCORE 2.71

    DB:2.71:Issue Connecting Ios 7 Devices To Wpa2 Wifi Networks sd


    I am using Cisco Wireless in our corporate environment. We are using Enterprise WPA2 security which requires the user to accept the certificate. I am no longer able to connect to these networks after installing ios 7 except for a newtork that I already accepted the certificate for. I enter the correct credentials and immediately get a message that it cannot connect to the network. I should get a message to accept a certificate. I wanted to open this up as an ios 7 discussion because it currently happens on my new iphone 5s as well as on my iphone 4s and ipad 3.Any ideas?Thanks!

    DB:2.71:Issue Connecting Ios 7 Devices To Wpa2 Wifi Networks sd

    Unfortunately it has not yet been fixed. Our work around is to forget the network and then join a different WPA2 wireless network.

  • RELEVANCY SCORE 2.71

    DB:2.71:Enterprise Wi-Fi Networks jc


    Does the KIN support enterprise networks? The device is advertised as Wi-Fi Capable, but does not support enterprise as far as I can tell. Does this mean that the device is Wi-Fi capable, but not certified. Because as far as I know, Wi-Fi certification requires
    that the device support WPA2 security with compliance with IEEE 802.11i, which specifies both WPA2-Personal and WPA2-Enterprise as connection types.
    My basic question is simple:
    Can the KIN connect to enterprise-based networks? If not, are users being misled?

    DB:2.71:Enterprise Wi-Fi Networks jc

    Yep, the ZuneHD has had the same issue since day one. I'd know because I own a ZuneHD as well. I've been fairly vocal about this over in the Zune.net forums, but no comment or fix has ever been made by the staff/team.
    If a fix ever comes down, I'd love it. I just hope that WP7 devices don't have this same problem...

  • RELEVANCY SCORE 2.69

    DB:2.69:Why Does The Airplay Icon Disappear When I Enable Wpa2? p3


    I have an early 2008 MacBook Pro set up to share its internet connection (ethernet) with my new AppleTV, new iPad, and Phone 4s by creating a WiFi network. When this network setup has no password, I can use AirPlay just fine on all my devices. But when I enable WPA2 protection for the network, I can connect to the network and browse the internet etc. on all my devices, but AirPlay is nowhere to be found! What's the solution?All software on all devices is up to date. I've tried holding down option when creating the network to try WEP, no luck. WPA2, no luck (Is there a way to specify WPA2 Personal and not just WPA2 when setting up internet sharing?) No security, plenty of luck! But that's not what I want... Please help!

    DB:2.69:Why Does The Airplay Icon Disappear When I Enable Wpa2? p3

    I have an early 2008 MacBook Pro set up to share its internet connection (ethernet) with my new AppleTV, new iPad, and Phone 4s by creating a WiFi network. When this network setup has no password, I can use AirPlay just fine on all my devices. But when I enable WPA2 protection for the network, I can connect to the network and browse the internet etc. on all my devices, but AirPlay is nowhere to be found! What's the solution?All software on all devices is up to date. I've tried holding down option when creating the network to try WEP, no luck. WPA2, no luck (Is there a way to specify WPA2 Personal and not just WPA2 when setting up internet sharing?) No security, plenty of luck! But that's not what I want... Please help!

  • RELEVANCY SCORE 2.69

    DB:2.69:Can My Employer See The Names Of The Wifi Networks I'Ve Connected To Via My Corporate-Issued Ipad? z8


    Can my employer see the names of the wifi networks i've connected to via my corporate-issued iPad? Can they see the dates and times as well?If so, is there a way to clear this history periodically?

    DB:2.69:Can My Employer See The Names Of The Wifi Networks I'Ve Connected To Via My Corporate-Issued Ipad? z8

    Yes, they can and no, you can't clear it if they have set your iPad up correctly. IP addresses can be traced to specific towns and addresses. The iPad can locate itself by searching WiFi databases even without GPS. So can your employer. That iPad is not yours. It belongs to your employer. You have NO rights to privacy using it. And if you try tampering with certain settings and profile files they will know too. It happened in a school district in California. Students figured out how to modify profiles to remove restrictions. They got their iPads confiscated.I find it curious that you are trying to hide from your employer while using their property. We had people suspended for using their corporate cell phones to make personal calls. They also had to pay the company back for those calls.Again, you have no right to privacy in this matter and your employer, if their IT department is savvy, will know when, where, and how you are using their property at all times. Message was edited by: lkrupp

  • RELEVANCY SCORE 2.69

    DB:2.69:Problem With Wpa2 With App Store af


    Hi,

    i got the following problem, i configure the wpa2 enterprise wifi from my corporate network as i did with my iphone 3gs.
    when i surf the web everything its correct, there is no problem even with the proxy. however the following apps cannot access the web (Mail, App Store, Itunes) even i can surf the web i cannot send receive mail, and when i go to the app Store the system seems to download the content but it doesnt show anything even if i wait a lot.

    can anyone have the same issue? how can i get aroung?.

    DB:2.69:Problem With Wpa2 With App Store af

    Hi Achim,
    yes proxy asks authentication 2 times.
    kind regards
    ric44

  • RELEVANCY SCORE 2.69

    DB:2.69:Apple Ipad And Wifi - Issues With Mixed Modes mp



    Apple continues to document that iPad wireless issues on corporate networks are not widespread, but this does not seem to be the case. We have isolated iPad issues down to mixed modes - B/G, G/N, etc. If you run one standard (e.g. G) connectivity is stable, but when you run two standards on one band connectivity is incredibly unstable. This presents a challenge in a larger part of our environment because we use 1252's with G/N on 2.4ghz. Disabling N diminishes performance and disabling G limits the devices that can connect to our network.

    We are currently using both WPA and WPA2 with PSK and/or certificates - both have challenges

    Has anyone found a viable workaround for AP configurations or client side on the iPads themselves?

    DB:2.69:Apple Ipad And Wifi - Issues With Mixed Modes mp


    What sort of issues are you having with them? Are you suffering from the known issue where the iPad will retain an IP address past the lease time? I was able to pinpoint an issue where iPhones/iPod Touches/iPads could not connect to an enterprise network for the first time because it would forward credentials for a different enterprise network configured on the device before the user can enter the appropriate credentials to connect. The credentials would get rejected and prevent the device from being able to connect.

  • RELEVANCY SCORE 2.68

    DB:2.68:How To Remove A Wifi Profile Of Type Wpa2-Enterprise When Remove Is Not Available. 1d


    I have a Windows 7 wifi profile of type WPA2-Enterprise that will not allow me to remove it. The remove icon is missing and it is listed in a section of Manage Wireless Networks named "Networks you can view." The property screen reads, "These settings are
    managed by your system administrator." I am the system administrator.

    This is a wifi profile that at one time was being test configured as a WPA2-Enterprise type, but has been reverted to a WPA2-PSK type. Not the wifi profile is unusable because it reports, "The settings saved on this computer for this network do not match
    the requirements of the network."
    How can I delete the wifi profile and start over?

    DB:2.68:How To Remove A Wifi Profile Of Type Wpa2-Enterprise When Remove Is Not Available. 1d

    You might try the netsh wlan delete profiles command...
    Here is the syntax...
    http://technet.microsoft.com/en-us/library/dd744890(v=ws.10)#bkmk_wlanShowProfiles
    http://technet.microsoft.com/en-us/library/dd744890(v=ws.10)#bkmk_wlanDeleteProfile
    http://sdrv.ms/QPTtQY
    Go to Start and type cmd in the search line. Right click on
    cmd.exe and selectRun as administrator then run the netsh commands...

  • RELEVANCY SCORE 2.68

    DB:2.68:Connecting To Wpa2 9j


    I have two pres that both connected to the wpa2 network at work without problem until the recent upgrade to webOS 1.4.5. Has anyone else had problems with wpa2 since upgrading to 1.4.5? I have checked with our tech support and they have not changed anything with our wifi. I can connect to wep and open networks no problem. With wpa2 it asks for my login id and password and then times out trying to connect. I suspect that it is a problem with the upgrade.




    Post relates to: Pre p100eww (Bell)

    DB:2.68:Connecting To Wpa2 9j


    My office has the same Aruba wifi system using Protected EAP authentication, and my Pre cannot make a wifi connection after the 1.4.5 update. I'm hoping that Palm will release a patch to address this. Any idea on timing?

  • RELEVANCY SCORE 2.68

    DB:2.68:Cannot Join, Timeout Error On Some Devices p9



    HI,

    I have a FIOS Actiontec wireless router. I am using WPA2.

    In the last few weeks, a few of my devices suddently cannot access the wireless network while others can. Specifially iPhones and iPads keep the connection, but my AppleTV and Mac lose it. When I try to reconnect on the Mac (the network is still in the list of available networks) the error message is "Could not join [network name]" A connection timeout occured." The AppleTV losses the connection just for a second (so steaming Netflix stops) but picks it up just a few seconds later.

    The iPad is WiFi only and I turned off cell data on the iPhoneand wifi connection always work on those devices.

    Any thoughts on this??

    Thanks!

    jb37101

    DB:2.68:Cannot Join, Timeout Error On Some Devices p9


    Try changing the wireless channel. You might be getting interference from a neighbor on the same channel.

  • RELEVANCY SCORE 2.65

    DB:2.65:Apple Tv3 And Wpa2 Enterprise 1s


    Hi Does Apple TV 3 support WPA2 enterprise ?Regards

    DB:2.65:Apple Tv3 And Wpa2 Enterprise 1s

    My home wifi is an unwired wifi that uses 802.1x WPA2 enterprise for some reason! Is it possible to connect my brand new apple tv, if I do not have a mac to use Configurator to install a profile?

  • RELEVANCY SCORE 2.64

    DB:2.64:Wpa2 Enterprise With Netctl ax



    Hi,Im trying to connect to my university wifi which I believe is WPA2 Enterprise protected. I read the wiki about using the Eduroam netctl profile example for WPA2 Enterprise networks but it doesnt seem to work for me. This is what I have:
    Connection=wireless
    Interface=wlp4s0b1
    Security=wpa-configsection
    Description=nyu wpa2 network
    IP=dhcp
    TimeoutWPA=30
    WPAConfigSection=(
    ssid=nyu
    key_mgmt=WPA-EAP
    eap=PEAP
    proto=WPA2
    phase2=auth=PAP #maybe MSCHAPv2
    auth_alg=OPEN #maybe
    anonymous_identity=anonymous # ex: tu-dresden.de
    identity=myusername # ex: s4234381@tu-dresden.de
    password=mypassword
    ca_cert=/usr/share/ca-certificates/trust-source/mozilla.trust.crt
    )

    DB:2.64:Wpa2 Enterprise With Netctl ax


    Does your university have a site with some information/guidance for using eduroam?

    Have you tried other example profiles from here, such as this one and this one? The wiki refers to this AUR package, which seems to be where you got the profile youve tried. Perhaps try the other example profiles.

  • RELEVANCY SCORE 2.63

    DB:2.63:Wifi Wpa2-Enterprise Profile a7


    How I can generate WiFi WPA2-Enterprise profile on base of the WlanGetAvailableNetworkList result information?

    DB:2.63:Wifi Wpa2-Enterprise Profile a7

    How I can generate WiFi WPA2-Enterprise profile on base of the WlanGetAvailableNetworkList result information?

  • RELEVANCY SCORE 2.63

    DB:2.63:Guest Portal Voucher Expired But Guest Still Accessing Network 3z


    Just purchased and installed a UniFi Pro. I have everything configured - 2 Wifi networks, 1 for internal authorised staff (WPA2-Enterprise), and 1 for guests using a WPA2 personal password and voucher access on the built in Guest Portal.I created a voucher that should have lasted 10 minutes. The Hotspot manager shows the guest as expired, but the guest still has full access to the guest network.Guest Portal is configured as - Enable Guest Portal - Hotspot - Redirect to original URL Enable Voucher based authenticationRestricted Subnets-list of internal subnets to restrictAllowed Subnets-list of approved subnetsWiFi Network configured with guest name, XXXXguestWPA-Personal with a password configuredApply Guest PoliciesWhen first connecting the voucher window came up, entered the voucher, all worked fine, still working fine 1hr 11 minutes since it should have expired.

    DB:2.63:Guest Portal Voucher Expired But Guest Still Accessing Network 3z

    Yeah. I'm out a nickel.While you are posting screen shot here are three other things to consider, given what you posted:1) Check the IP info your client device is obtaining. Specifically, check the default gateway assignment. Is it pointing to the IP of the controller? This is crucial.Actually let's stop there for the moment.Ok no it won't have the default gateway pointing to the controller. If that's the problem then I'll need to completely reconsider our Guest WiFi access capability.Our DHCP server on the LAN will be providing the same IP subnet and default gateway as any other connected device (whether WiFi or Ethernet connected). I was hoping that this Guest portal would be able to provide a time-limited connection to visiting contractors and sales reps presenting information rather than just providing them with a WiFi access password which would then have to be changed each time.

  • RELEVANCY SCORE 2.62

    DB:2.62:Wpa2 Enterprise Timeout On Airport Extreme/Mac? 89


    Hi all,I've got a 2013 Airport Extreme covering a small off site office for wifi, with a few Mac clients. Currently all are set to authenticate through a RADIUS server (Mac OS X 10.8.5 server) and can authenticate without issue. However, for machines that are in the office over night (ie wifi desktop edit bays), the machines are automatically disconnecting at least once every 24 hours and needing to be manually reconnected by clicking the wifi icon in the top right and selecting the network. I've got the wifi network and password stored on the machines in system preferences (with no other wifi networks in the list), but they aren't auto reconnecting on their own. However, when the correct network is selected, they connect without issue for a day and then disconnect. Also if the machines are rebooted they do connect fine. Do the airport extremes have a wpa2 enterprise timeout setting somewhere? Or could this be something on the RADIUS server? I don't have this issue with a wpa2 personal setting. Thanks!

    DB:2.62:Wpa2 Enterprise Timeout On Airport Extreme/Mac? 89

    Hi all,I've got a 2013 Airport Extreme covering a small off site office for wifi, with a few Mac clients. Currently all are set to authenticate through a RADIUS server (Mac OS X 10.8.5 server) and can authenticate without issue. However, for machines that are in the office over night (ie wifi desktop edit bays), the machines are automatically disconnecting at least once every 24 hours and needing to be manually reconnected by clicking the wifi icon in the top right and selecting the network. I've got the wifi network and password stored on the machines in system preferences (with no other wifi networks in the list), but they aren't auto reconnecting on their own. However, when the correct network is selected, they connect without issue for a day and then disconnect. Also if the machines are rebooted they do connect fine. Do the airport extremes have a wpa2 enterprise timeout setting somewhere? Or could this be something on the RADIUS server? I don't have this issue with a wpa2 personal setting. Thanks!

  • RELEVANCY SCORE 2.62

    DB:2.62:Wpa2 And Wpa2 Enterprise For Pavilion Dv6t 3000 Does Not Connect ca



    We have a WPA2 Enterprise network running off of a Cisco Wireless Lan Controller. The controller is of the 4400 Series and the Aironets are 1130G Series. The issue is that this brand new computer will not connect to this network some of the time and when it does connect it times out. It does work for all the Mac computers and most of the PC. What do I have to do to this HP pavilion dv6t 3000 to make it work on our network?

    Other information: Networks that are not encrypted work fine.

    Intel(r) Wifi Link 1000 - Wifi card

    DB:2.62:Wpa2 And Wpa2 Enterprise For Pavilion Dv6t 3000 Does Not Connect ca


    Thanks to another message board. The answer was located.

    The second connection to the wifi card was not attached. Opened up the bay to the wifi card and just reconnected the wifi card connectors.

  • RELEVANCY SCORE 2.62

    DB:2.62:E71 - Wifi Wpa Enterprise -- How? 18



    ESSID (Network Name): *****
    Network Type: Infrastructure (or Access Point)
    TCP/IP: DHCP
    EAP Type: PEAP
    Network Authentication: WPA/WPA2 (WPA/WPA2-enterprise)
    Data Encryption: TKIP/AES
    Authentication Method/Protocol: MSCHAP-V2
    Inner EAP Type: EAP-MSCHAPv2

    Certificate - CyberTrust GTE

    How do I connect? I have tried all possible settings. Is it impossible to connect with the e71 to this kind of a university wlan network?

    DB:2.62:E71 - Wifi Wpa Enterprise -- How? 18


    This is a very good post of Saataja about your problem. This might help you in the right direction.

    /discussions/board/message?board.id=connectivitymessage.id=25714#M25714




    ‡Thank you for hitting the Blue/Green Star button‡

    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • RELEVANCY SCORE 2.61

    DB:2.61:Wifi Connection Problems To Enterprise Environment... aj



    Hello,

    I trie to connect to a WiFi network with WPA2 enterprice security EAP-PEAP with inner GTC termination without certificate validation. (No MS-CHAPv2 supported)

    Does anybody know how to configure that?

    DB:2.61:Wifi Connection Problems To Enterprise Environment... aj

    Thanks Jekiboi20, for the suggestion. But i know how to connect to a WLAN.

    But i think WP8 cannot connect to the network described as above.

    I cannot change the way a WLAN terminates the connection.
    A lot of WLAN's on school's, and buildings are configured that way.
    That's the reason i asked
    Does anybody has a answer?

  • RELEVANCY SCORE 2.61

    DB:2.61:Jelly Bean Enterprise Wifi df



    Ever since the JB update I cannot connect to my corporate WiFi access point using 802.1x EAP, WPA2 Enterprise. This seems to be a known Jelly Bean issue http://code.google.com/p/android/issues/detail?can=2start=0num=100q=colspec=ID%20Type%20Status%20Owner%20Summary%20Starsgroupby=sort=id=34212 kinda surprised VZW didn't fix it since it took so long to get the JB update out.

    Any ideas how to fix, it's also killing my battery since it's continuously trying to unsuccessfully connect to WiFi, so I had to just turn WiFi off.

    Thanks,

    Allan

    DB:2.61:Jelly Bean Enterprise Wifi df


    Ever since the JB update I cannot connect to my corporate WiFi access point using 802.1x EAP, WPA2 Enterprise. This seems to be a known Jelly Bean issue http://code.google.com/p/android/issues/detail?can=2start=0num=100q=colspec=ID%20Type%20Status%20Owner%20Summary%20Starsgroupby=sort=id=34212 kinda surprised VZW didn't fix it since it took so long to get the JB update out.

    Any ideas how to fix, it's also killing my battery since it's continuously trying to unsuccessfully connect to WiFi, so I had to just turn WiFi off.

    Thanks,

    Allan

  • RELEVANCY SCORE 2.60

    DB:2.60:Wifi Connectivity Issue 3x


    Hello to every one!
    Can anybody answer to this question: I have Cisco Enterprise infrastructure with WiFI access points. When I tried to connect to wireless network protected by WPA2-Enterprise with RADIUS server from my Nokia Lumia 920 the connection fails. But when I created
    WPA2-Personal protected network on my Cisco 2106 wireless controller - connection is established. What's the problem?! Does all Windows Phone 8 phones not connect to WPA2-Enterprise networks?!

    DB:2.60:Wifi Connectivity Issue 3x

    Здравствуйте,
    MaximEgorov.

    Вы задали вопрос в русскоязычной ветке форума. По вашей проблеме рекомендую ознакомиться с

    этим и
    этим обсуждениями.

  • RELEVANCY SCORE 2.59

    DB:2.59:Z30 Wifi Issue -Won't Connect While Q10 Will cs


    I've recently upgraded from the Q10 to a new Z30. When using up my home Wi-Fi on my Z30 it stopped connecting. Attempted to re-enter password and it fails to authenticate. Tried deleting and re-entering password on Q10 and that worked fine.Please note my Z30 works fine on my work wi-fi which only differs through use of corporate WPA2 vs WPA personal (at home).Any suggestions? It's a recent change. Everything was fine last week but now I can not get it to connect. Tried two home Wi-Fi networks so far and both fail to connect on Z30 ... but Q10 is fine with the same password and settings.OS 10.2.1.3175 / SR 10.2.1.2941Z30 STA 100-5






    Solved!
    Go to Solution.

    DB:2.59:Z30 Wifi Issue -Won't Connect While Q10 Will cs


    glad to hear you are doing better now




    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs upClick to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.

    SIM Free BlackBerry Unlocking FAQFollow me on Twitter @knottyrope

    Want to thank me? Buy my KnottyRope App here

    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • RELEVANCY SCORE 2.59

    DB:2.59:Wpa2 sx


    I am trying to connect to my corporate network. I have coworkers that can connect using thier iPhones and WPA2, but when I try, using enterprise which seems to be my only other option outside of WPA1, I am refused. Get a message about IP resolution cannot be done. How would I activate and or verfiy that I am using WPA2 and get connected. Have tried standard login as well as using CORP\"login" with needed password and nothing.
    Post relates to: Pre p100eww (Sprint)

    DB:2.59:Wpa2 sx

    I am trying to connect to my corporate network. I have coworkers that can connect using thier iPhones and WPA2, but when I try, using enterprise which seems to be my only other option outside of WPA1, I am refused. Get a message about IP resolution cannot be done. How would I activate and or verfiy that I am using WPA2 and get connected. Have tried standard login as well as using CORP\"login" with needed password and nothing.
    Post relates to: Pre p100eww (Sprint)

  • RELEVANCY SCORE 2.58

    DB:2.58:802.11i f3


    I have a WUSB54GSC adapter and I see it listed on WiFi alliances certified adapters list. I am looking to buy a adapter and router that are both certified as WPA2 compliant.
    I don't see it listed in the user manual though for this device, altho on WiFI security alliances page, it shows this device certified up to WPA2-Enterprise along with all EAP types.

    I've noticed in the user manual for my adapter, Linksys offers WPA-Enterprise, and WPA2-Personal, this is extremely confusing, it appears obvious WPA2-Personal is just using a Pre-shared key.

    Question I have is WPA-Enterprise section it says that for WPA-Enterprise , I can choose AES(I'm guessing CCMP is used). Isn't this just WPA2-Enterprise?

    Does anyone know what the heck the difference is between WPA-Enterprise and WPA2-Enterprise? Looks to me according to wikipedia the only big difference between wpa and wpa2 was the inclusion of AES algorithm(more specifically CCMP). I'm just confused by the user manual for my wusb54gsc

    http://www.linksys.com/servlet/Satellite?blobcol=u​rldatablobheadername1=Content-Typeblobheadername​2=Content-Dispositionblobheadervalue1=application​%2Fpdfblobheadervalue2=inline%3B+filename%3DWUSB5​4GSC_ug.pdfblobkey=idblobtable=MungoBlobsblobwh​ere=1130830648831ssbinary=true,

    it says I have four options under WPA-Personal, WPA2-Personal, WPA-Enterprise, Radius(wep).

    so again I ask, whats the difference between WPA-Enterprise and WPA2-Enterprise. And if the WUSB54GSC is certified for WPA2-Enterprise, why isn't it listed as an option here in the manual?

    Lastly what EAP types are available with this device?

    Anyone that can answer any of these question, will have my utmost thanks.

    oh actually, really lastly, anyone suggest a router to go with this adapter?
    Message Edited by blargman on 10-21-200612:32 AM

    Message Edited by blargman on 10-21-200612:33 AM

    DB:2.58:802.11i f3

    WPA-enterprise and WPA2-enterprise were designed for use by businesses. Most ordinary home users should be using WPA-personal or preferably WPA2-personal, with AES, and a pre-shared key. Your pre-shared key should be at least 30 random alphanumeric characters, and should include both capital and small letters.Additionally, to maximize your wireless security, you should pick an SSID made up of randon alphanumeric characters, at least 12 characters, and disable SSID broadcast.Also, to maximize your wireless security, ideally you should enable MAC address filtering, thereby limiting access to your network to your own devices.

  • RELEVANCY SCORE 2.58

    DB:2.58:Wp8 Cant Connect To Wpa2-Enterprise Network... s3


    I'm an administrator of corporate wifi network. We use Extremenetworks wireless equipment.
    There is a problem with WP8 connection to WPA2-enterprise network.

    DB:2.58:Wp8 Cant Connect To Wpa2-Enterprise Network... s3

    I have the same problem in my nokia lumia 820.
    Cant connect to a wpa2 enterprise AES PEAP network, in my workplace.
    Is there any work around?

  • RELEVANCY SCORE 2.58

    DB:2.58:How To Manually Set Time And Date For 802.1x Wpa2 Enterprise Support! x9


    If you load an 802.1x profile on the Apple TV 3rd G, and disconnect the power the date and time reverts back to some unknown time which causes the certificates to fail with the Appletv code 5.3 latest update. Chicken and egg because AppleTV uses ntp to set the date and time. But you need to be connected to the network, but you can't connect if you don't have the correct time set.If you power off, you lose network connectivity through your 802.1x profile wpa2 enterprise. If you reboot, it holds on to the time and date. This is not ideal to manage these devices, because users may unplug the AppleTVs.Please Apple Resolve this issue!Either let us set the date and time manually or remember the time after power outages.CheersA

    DB:2.58:How To Manually Set Time And Date For 802.1x Wpa2 Enterprise Support! x9

    If you load an 802.1x profile on the Apple TV 3rd G, and disconnect the power the date and time reverts back to some unknown time which causes the certificates to fail with the Appletv code 5.3 latest update. Chicken and egg because AppleTV uses ntp to set the date and time. But you need to be connected to the network, but you can't connect if you don't have the correct time set.If you power off, you lose network connectivity through your 802.1x profile wpa2 enterprise. If you reboot, it holds on to the time and date. This is not ideal to manage these devices, because users may unplug the AppleTVs.Please Apple Resolve this issue!Either let us set the date and time manually or remember the time after power outages.CheersA

  • RELEVANCY SCORE 2.58

    DB:2.58:My Ipad Mini Will Not Connect To My House's Wi-Fi With The Password x1


    I purchased an iPad mini this past week from Target. I am trying to get it to connect to my house's wi-fi but it is not recognizing it. I have the wi-fi turned on through settings and type in the name of my house's network, the password and it says it can't find it. I looked up my preferred networks on my laptop to see what kind of password it is and its a WPA2 personal password. My options when trying to connect on my iPad mini are WEP, WPA, WPA2, WPA Enterprise and WPA2 Enterprise. I have tried the password in ALL of them and it is not working. I am completely frustrated and at a loss as to what to do. If my iPad isn't going to work with the wifi, then I feel like I wasted $$. Any suggestions are greatly appreciated!!

    DB:2.58:My Ipad Mini Will Not Connect To My House's Wi-Fi With The Password x1

    Some things to try first:1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router then back On. Now boot your iPad. Hopefully it will see the WiFi.2. Go to SettingsWi-Fi and turn Off. Then while at SettingsWi-Fi, turn back On and chose a Network.3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html4. Go into your router security settings and change from WEP to WPA with AES.5. Renew IP Address: (especially if you are droping internet connection) Launch Settings app Tap on Wi-Fi Tap on the blue arrow of the Wi-Fi network that you connect to from the list In the window that opens, tap on the Renew Lease button6. Potential Quick Fixes When Your iPad Wont Connect to Your Wifi Networkhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/~~~~~~~~~~~~~~~~~~~~~~~~~Fix WiFi Issue for iOS 7http://ipadnerds.com/fix-wifi-issue-ios-7/iOS 6 Wifi Problems/FixesWi-Fi Fix for iOS 6https://discussions.apple.com/thread/4823738?tstart=240How To: Workaround iPad Wi-Fi Issueshttp://www.theipadfan.com/workaround-ipad-wifi-issues/Another Fix For iOS 6 WiFi Problemshttp://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.Fix For iOS 6 WiFi Problems?http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/Did iOS 6 Screw Your Wi-Fi? Heres How to Fix Ithttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bugHow To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.htmliOS 6 iPad 3 wi-fi "connection fix" for netgear routerhttp://www.youtube.com/watch?v=XsWS4ha-dn0Apple's iOS 6 Wi-Fi problemshttp://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/~~~~~~~~~~~~~~~~~~~~~~~iPad: Issues connecting to Wi-Fi networkshttp://support.apple.com/kb/ts3304How to Boost Your Wi-Fi Signalhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tmTroubleshooting a Weak Wi-Fi Signalhttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htmHow to Fix a Poor Wi-Fi Signal on Your iPadhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htmiOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/How to Fix: My iPad Won't Connect to WiFihttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htmiOS: Connecting to the Internet http://support.apple.com/kb/HT1695iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199How to Quickly Fix iPad 3 Wi-Fi Reception Problemshttp://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/iPad Wi-Fi Problems: Comprehensive List of Fixeshttp://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/Connect iPad to Wi-Fi (with troubleshooting info)http://thehowto.wikidot.com/wifi-connect-ipad10 Ways to Boost Your Wireless Signalhttp://www.pcmag.com/article2/0,2817,2372811,00.aspFix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxEFix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60tstart=0How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzUnable to Connect After iOS Update - saw this solution on another post.https://discussions.apple.com/thread/4010130Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, theres an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.Wi-Fi or Bluetooth settings grayed out or dimhttp://support.apple.com/kb/TS1559~~~~~~~~~~~~~~~If any of the above solutions work, please post back what solved your problem. It will help others with the same problem. Cheers, Tom

  • RELEVANCY SCORE 2.57

    DB:2.57:Password-Less Authentication To Wpa2 Enterprise Wifi Network For Personal Devices? kf


    There are many people who need to connect to the corporate WIFI using devices that are not joined to our domain and therefore cannot connect automatically as the computer or user account.
    Laptops brought in by subcontractors that are not joined to our domain, employees' iPhones, iPads, Android and Windows Phone smartphones and tablets.
    They are currently logging in to the WPA2 Enterprise network using their domain user credentials on the BYODs and saving them. Every time their password expires, they forgot to change the saved credentials on these devices and it locks out their domain
    account. This is a waste of time for them and IT staff who have to keep unlocking accounts and assisting the users with changing their saved WIFI credentials on phones and laptops.
    Is there another methodavailablefor non-domain devices such as certificates that can be installed one time and can be remotely revoked so the user never has to make changes to their device again once the WIFI connection is initially set up?
    What is the best/simplest way to handle this?

    DB:2.57:Password-Less Authentication To Wpa2 Enterprise Wifi Network For Personal Devices? kf

    Hi MyGposts,

    Thanks for posting here.

    Is there another method available for non-domain devices such as certificates that can be installed one time and can be remotely revoked so the user never has to make changes to their device again once the WIFI connection is initially
    set up?

    Yes, we can achieve that by using certification based authentication protocols thus devices with proper certificate installed will be able to pass the authentication and access into the wireless network . We need to deploy it by modifying policy on
    RADIUS server and also deploy our PKI system:

    Certificate-based Authentication Protocols
    http://technet.microsoft.com/en-us/library/dd197564(WS.10).aspx

    Thanks.

    Tiger LiTiger Li
    TechNet Community Support

  • RELEVANCY SCORE 2.57

    DB:2.57:Wifi Using Wpa2-Enterprise On Nokia Lumia 820 aa



    Hi There,

    Since December I have been unable to log any of my work mobiles (Nokia 820) onto our secure corporate WiFi

    My understanding there was an update in December 2012, all of the phones were connected to the corporate WiFi so I knew they did work. I thought they would have worked after a reset to factory settings and stop updates but this did not work either.

    My investigations:

    The Nokia 820 WiFi works if using WPA2-Personnel (pre-shared key) it does not work when trying to connect using WPA2-Enterprise (user name and password from Radius Server)

    Our corporate environment policy is for all passwords to change on a monthly basis so we have to connect using WPA2-Enterprise.

    I have 40 HTC Radar's that are still able to connect to the corporate WiFi along with my other test phones, Iphone 5 and Samsung Galaxy S III, along with all of the company laptops. I know there is no fault with the corporate Wifi.

    The Microsoft Surace RT also stopped working around about the same time, I managed to get around this by configuring WiFi through the Desktop of the surface rather than the metro interface - sadly there is nothing on the Lumia 820 to allow you to select authentication and encryption. advanced should be changed to hidden networks...

    Any information would be most grateful - I am happy to provide further information should you need more.

    Grumpy Old Techie

    DB:2.57:Wifi Using Wpa2-Enterprise On Nokia Lumia 820 aa


    WPA-Enterprise worked before December, with your Nokia 820, is that correct? Which EAP type does yourcorporation use?

  • RELEVANCY SCORE 2.57

    DB:2.57:Lumia W.P. 8.0 Not Connecting To Wpa2 Aes as



    Greetings, my 928 will not connect to our enterprise WiFi with WPA2 AES standards. I've spoken with the WiFi administrator and he's checked his system thoroughly and there's nothing wrong with it. I'm able to connect under our "guest" portal just fine but get: "Connection Unsuccessful" "Your phone couldn't reach the WiFi network ....." after entering my username and password for the secure side. The address is not hidden and I connect to every other WiFi that I should. Frustrated.

    DB:2.57:Lumia W.P. 8.0 Not Connecting To Wpa2 Aes as


    Greetings, my 928 will not connect to our enterprise WiFi with WPA2 AES standards. I've spoken with the WiFi administrator and he's checked his system thoroughly and there's nothing wrong with it. I'm able to connect under our "guest" portal just fine but get: "Connection Unsuccessful" "Your phone couldn't reach the WiFi network ....." after entering my username and password for the secure side. The address is not hidden and I connect to every other WiFi that I should. Frustrated.

  • RELEVANCY SCORE 2.57

    DB:2.57:Wpa2 Enterprise + Certificate Issue = Wifi Fun! 87



    I have a Bold. My corporate wireless network is setup toauthenticate wireless clients with WPA2 EnterprisePEAP with no certificates. The BB bold doesn't seem to support PEAP authentication with no certificates. WiFi diagnostics tell me that the device is associating with the wireless network but it's unable to authenticate because I keep getting an error "Invalid Certificate". I want to disable the use of certificates or use some other method to connect to the Wi-Fi. How can I do that?

    Using the search feature I've also tried various suggestions of changing PEAP to LEAP and then having it set to user@domain. I've also tried domain\user. Nothing works.

    DB:2.57:Wpa2 Enterprise + Certificate Issue = Wifi Fun! 87


    i have the same problem. im using a bold 9700 and i cant connect to wpa2 enterprise ( my school's network ) i've tried the Pre shared key but the problem is that WPA2 enterprise asks for both username and password while PSK asks for the pre shared key only any idea how to solve this??

  • RELEVANCY SCORE 2.57

    DB:2.57:Ics Problem Roaming On Wpa2 Wifi 1a



    ICS on Xperia Arc S definately has an issue.

    My LT18i had no problem roaming on open wifi or WEP wifi but had problem roaming on WPA2 wifi..

    That is happening since updating to ICS. Neither work or home are stable.

    I think all members since updating to ICS have same problem with me.

    Please reply ASAP .

    Regards,

    AndroidUser

    Malaysia

    P.S. I have removed 'forget' both networks on my phone and reset them up. That does not help.

  • RELEVANCY SCORE 2.56

    DB:2.56:Appletv Workaround Wpa2 Enterprise pj


    I live on a college campus with only WPA2 Enterprise wireless internet access. This is not compatible with Time Capsule or AppleTV. I hoped that if I were to use internet sharing on my mac, I could share my wireless network through my time capsule (via ethernet cable) between my iMac and AppleTV --at least temporarily so that I could get it setup and do periodic updates.

    Any ideas?

    DB:2.56:Appletv Workaround Wpa2 Enterprise pj

    I live on a college campus with only WPA2 Enterprise wireless internet access. This is not compatible with Time Capsule or AppleTV. I hoped that if I were to use internet sharing on my mac, I could share my wireless network through my time capsule (via ethernet cable) between my iMac and AppleTV --at least temporarily so that I could get it setup and do periodic updates.

    Any ideas?

  • RELEVANCY SCORE 2.56

    DB:2.56:Ios 5 Wifi Bug mp


    I have just installed ios5 gm to my iphone4. When I try to connect a WPA2 enterprise wifi, after the connecton is established, it is OK. But after a while, if you switch your iphone to 3G and close wifi. Next time, when you enable wifi, the WPA2 enterprise wifi network will never be connected unless you reset your network settings.

    DB:2.56:Ios 5 Wifi Bug mp

    i have the same problem after upgrading to ios5 wifi had gone entirely even reset or retoration can never repair ittryesd to retreive ios 4.3 but was not possible.Apple on the edge now!

  • RELEVANCY SCORE 2.56

    DB:2.56:How To Remove Duplicate Ssid From Wlangetavailablenetworklist (Wlanapi) aa


    I am working on WiFi with Windows WLANAPI Library. it causing issue in Network List. it shows same Network multiple times. how it is working like this. here i put example, which shows Duplicate SSID.
    Total 20 networks are visible.
    Network 0:

    pariveer
    0107FE28
    Open
    WEP
    Network 1:

    LimestonePublic
    0108009C
    WPA2-Personal
    AES
    Network 2:

    LimestoneSecure
    01080310
    WPA2-Personal
    AES
    Network 3:

    BSNL_AP
    01080584
    Open
    WEP
    Network 4:

    wildchild
    010807F8
    Open
    WEP
    Network 5:

    wildchild
    Profile not set
    Open
    WEP
    Network 6:

    SPiDiGO Broadband Call 66199888
    Profile not set
    Open
    WEP
    Network 7:

    Profile not set
    Open
    None
    Network 8:

    Profile not set
    Open
    None
    Network 9:

    LimestonePublic
    Profile not set
    WPA2-Personal
    AES
    Network 10:

    LimestoneSecure
    Profile not set
    WPA2-Personal
    AES
    Network 11:

    Profile not set
    WPA2-Enterprise
    AES
    Network 12:

    SPiDiGO
    Profile not set
    Open
    None
    Network 13:

    pariveer
    Profile not set
    WPA2-Personal
    AES
    Network 14:

    ALLIANCE
    Profile not set
    WPA2-Personal
    AES
    Network 15:

    NIMESH
    Profile not set
    WPA2-Personal
    AES
    Network 16:

    Spidigo Broadband Call 66199888
    Profile not set
    Open
    None
    Network 17:

    PS
    Profile not set
    Open
    WEP
    Network 18:

    Tikona 18002090044
    Profile not set
    Open
    None
    Network 19:

    BSNL_AP
    Profile not set
    Open
    WEP
    Command gvl completed successfully.
    Please See the Bold and Underlined Network List, Which is causing issue, why it shows repeatedly. Is there any Method to Remove This Duplication of Network List. Please anyone have any ideas or solution related to my query, Please Help me to Solve this Issue.
    Thanks Regards
    Tushar Kachhadiya

    Tushar Kachhadiya

    DB:2.56:How To Remove Duplicate Ssid From Wlangetavailablenetworklist (Wlanapi) aa

    http://social.msdn.microsoft.com/Forums/zh-CN/80766a39-0400-4e98-8b39-2d4c5f8cf683/how-to-remove-duplicate-ssid-from-wlangetavailablenetworklist-wlanapi?forum=windowssdk

    You post a wrong forum.

  • RELEVANCY SCORE 2.55

    DB:2.55:Administrative Credentials When Adding A Wep/Wpa/Wpa2 Enterprise Wifi Profile? 1s


    Hello,Why do users need to provide administrative credentials when they install a configuration profile containing installation of a WEP Enterprise or WPA/WPA2 Enterprise Wifi-profile? This is not the case when installing a Wifi-profile usning standad WEP, WPA or WPA2.Is this a bug? It confuses users with user profiles when they need to confirm the installation with administrative credentials.

    DB:2.55:Administrative Credentials When Adding A Wep/Wpa/Wpa2 Enterprise Wifi Profile? 1s

    I don't know the answer to your question. Maybe you can find something here:http://training.apple.com/pdf/WP_8021X_Authentication.pdf

  • RELEVANCY SCORE 2.54

    DB:2.54:Wpa2 Enterprise Connectivity Issues c1


    Hey Everyone I have 2 x MacBook Pro's and a very old-school MacBook (Plastic) edition experiancing some unique behaviour.We operate under a WPA2 Enterprise Wifi umbrella with a Radius server, which all works well when you connect and pop in your username and password for that session. However when you leave the site and return, fire up your MaCbook Pro it seems to have forgotted to auto-connect and simply sits there scanning for a wifi network.However if you click from the drop down list of networks, select the SSID it connects just fine with no re-prompt for username or passwords, its almost as if it needs to be "hand-held" through that initial connectivity. The Plastic MacBook however has a slightly different issue, it connect and auto-connects just fine but spontaniuously drops its wifi connection and has to be forced to reconnect. Open to any thoughts / comments on the situation Thanks!Tom

    DB:2.54:Wpa2 Enterprise Connectivity Issues c1

    Hey Everyone I have 2 x MacBook Pro's and a very old-school MacBook (Plastic) edition experiancing some unique behaviour.We operate under a WPA2 Enterprise Wifi umbrella with a Radius server, which all works well when you connect and pop in your username and password for that session. However when you leave the site and return, fire up your MaCbook Pro it seems to have forgotted to auto-connect and simply sits there scanning for a wifi network.However if you click from the drop down list of networks, select the SSID it connects just fine with no re-prompt for username or passwords, its almost as if it needs to be "hand-held" through that initial connectivity. The Plastic MacBook however has a slightly different issue, it connect and auto-connects just fine but spontaniuously drops its wifi connection and has to be forced to reconnect. Open to any thoughts / comments on the situation Thanks!Tom

  • RELEVANCY SCORE 2.54

    DB:2.54:Dm4 Incredibly Slow Connection To Wpa2 Enterprise Wireless Network, But Connects Elsewhere sk



    New laptop HP Pavilion DM4 with Windows 7 home premium 64 bit for use in a college wireless environment.

    The school insists on WPA2 Enterprise connection, which is the recommended Microsoft security protocol for Win 7.I have confirmed all the correct settings, such that I can routinely connect to the wireless network but on this model HP I consistently get speeds way under 10kbs, while if I use EXACT same settings on a different Lenovo, Dell, or other models of HP get speeds of over 5MG. Yes 500x faster. And in this school of about 1000 users, this computer is the only one which can't connect to the network reliably.HP tech support, wanted to blame the school network, but after sending 2 technicians to visit on campus, doing a complete wipe reinstall, and replacing the wireless adapter (Intel Centrino Wireless N 1030), they finally agreed it was their computer itself, so they sent a replacement unit. Unfortunately, the replacement unit has the EXACT same problem.BTW the problem computers do connect flawlessly to other wifi networks at full speed, just not the WPA2 Enterprise network. I appreciate any advise.

    DB:2.54:Dm4 Incredibly Slow Connection To Wpa2 Enterprise Wireless Network, But Connects Elsewhere sk


    hi. i have the same problem.

    if I use my battery latency reaches 940ms. energy reaches a maximum of 2. where to configure the wifi does not alter the latency to be using the notebook battery?

    

  • RELEVANCY SCORE 2.54

    DB:2.54:Password Input And Save Wifi Settings pp


    Hi @all,
    I've got 2 Q's:
    #1: Is there another way to enter the WiFi password, other than with the remote? My WiFi pwd is 64 characters long including special chars. Hence, entering this pwd with the remote is a bit cumbersome.

    #2: how do I save different WiFi settings on AppleTV (second gen)? when I switch known networks, I've to re-enter the pwds. The iPhone or OS X saves those settings - how can I instruct AppleTV to do that?

    i tried to configure AppleTV using iTunes or AirPort Utility, but I could not connect to ATV...

    TIA,
    JC

    DB:2.54:Password Input And Save Wifi Settings pp

    I have had the same problem. The problem has gone away once I went to itunes on my computer, choose my Apple TV as the destination for music and then went back and choose the computer as the destination.

  • RELEVANCY SCORE 2.54

    DB:2.54:Connect To Wpa2 Enterprise Wifi d8


    Is there a way to connect the sony dash to a WPA2 Enterprise wifi?
    I cannot find how to set the username field required by the authentication system with the current interface. Any suggestion?






    Solved!
    Go to Solution.

    DB:2.54:Connect To Wpa2 Enterprise Wifi d8


    Thank you for your post.
    The link below contain the information you requested.

    https://us.en.kb.sony.com/app/answers/detail/a_id/​32463

  • RELEVANCY SCORE 2.54

    DB:2.54:Issues With Wpa2-Enterprise With Radius Authentication 33



    Hello, world.

    First i'm sorry for my English, I'm not so familiar as other members.

    But we have quite similar problem - Unifi WiFi network deployed with two networks - one is with preshared key and other is integrated with enterprise RADIUS-server. And I got some complaints from exactly Mac-users about periodical random problems with wifi connectivity. We don;t use AC AP as described above, but we useUniFi AP-LR andUniFi AP hardware. Problems was deected on version 2.x.x firmware, we performed upgrade to 3.2.5, but problem persists.

    I tried to examine logs but there is nothing like about problem here.

    Please help to solve problem!

    Best regards, Aleksandr

    DB:2.54:Issues With Wpa2-Enterprise With Radius Authentication 33

    coachmark2 wrote:
    Sicher.

    Gibt es Probleme mit anderen Gerät und RADIUS? Oder ist es nur Apple Produkte? Wie lange sind die Gerät getrennt? Können sie sofort zurück verbinden oder mussen sie ein paar Minuten warten?

    Hi!

    Apple und Android hatten nie Probleme. Auch WinXP und Win7 (mit dem Umweg das WLAN von Hand anlegen zu müssen und die Zertifikatsüberprüfung zu deaktivieren) funktionierten.

    Dann kam ein Update von Windows (es war auf jeden Fall ein Mittwoch) und die Windows-PCs konnten sich nicht mehr Authentifizieren mittels 802.1X.

    Sie zeigten dasselbe Problem, welches bis dahin nur Windows-Phones gezeigt hatten.

    Nachdem wir auf dem Windowsserver konfigurieren konnten (Registry-Key), dass die Liste der gültigen Serverzertifikate nicht mehr mitgesendet wird, kamen plötzlich die Windows-Clients wieder ans Netz.

    Darauf hin überprüften wir die Windows-Phones und auch diese kamen jetzt ins Netz.

    Einzig der Kollege mit seinem Windows RT Tablet schafft es noch nicht.

    Es muss wohl ein Update gewesen sein, dass die Zertifikatsliste auf den Windows-PCs nun auswertet, auch wenn die Überprüfung des Serverzertifikats deaktiviert ist.

    Bezüglich des RT Tablets konnte ich noch nicht weiter forschen, da ich selber keins habe und den Kollegen zu selten sehe...

    GrußPatrick

  • RELEVANCY SCORE 2.54

    DB:2.54:Iphone 3gs (Au) Support For Wpa2 Enterprise mp


    Can someone provide me with an official page outlining whether the iPhone 3GS from Australia supports WPA2 Enterprise wifi security?Also, whether it depends on the version of iOS as well.Thanks.

    DB:2.54:Iphone 3gs (Au) Support For Wpa2 Enterprise mp

    Can someone provide me with an official page outlining whether the iPhone 3GS from Australia supports WPA2 Enterprise wifi security?Also, whether it depends on the version of iOS as well.Thanks.

  • RELEVANCY SCORE 2.53

    DB:2.53:Wifi W/Wpa/Wpa2 Enterprise 78


    I have a strange issue. We are trying to connect iPhones to the corporate wifi network. This uses WPA/WPA2 Enterprise encryption with EAP-FAST authentication. I have created a Wifi Configuration Profile using the iPhone Config Utility v3.3. All settings look correct.

    I install this config profile to an iPhone 4 and it cannot connect.
    I install this same config profile to iPod Touch 2G and it does not connect.
    I install this same config to iPad2 and it works perfectly fine. Connects every time no problem.

    Apparently there is some difference in how the devices handle wifi security?!?

    Does anyone have any insight into this?

    DB:2.53:Wifi W/Wpa/Wpa2 Enterprise 78

    Can you connect without the profile installed?

  • RELEVANCY SCORE 2.53

    DB:2.53:Surface Pro 3 Cant Connect To My Corporate Wpa2 Enterprise Hidden Network xm


    Hi, Just bought a Surface Pro 3. It cannot connect to my WPA2 Enterprise hidden corporate network. My Surface Pro 2 can connect. The Surface Pro 3 is up-to-date on all patches. Connecting my computer is allowed but unsupported by the company. So, I won't
    get any support from my help desk. Does anyone have any thoughts on how to fix this or how to go about troubleshooting?

    DB:2.53:Surface Pro 3 Cant Connect To My Corporate Wpa2 Enterprise Hidden Network xm

    Hi, Caesar(1),

    This was helpful. I had to forget the network and I then set it up duplicating the settings on my work PC. What is interesting is that, until a reboot,Windows reported a limited wireless connection, but the connection works. Also, Windows showed a wired,
    rather than a wireless connection, when swiping form the right. On reboot, all is well. Strange.

    I thank you much for your suggestion. I think I'll mark this as solved. I'll investigate my other problem with CableWifi further and repost if necessary.

  • RELEVANCY SCORE 2.53

    DB:2.53:Wpa2 Enterprise sm


    I'm currently living on campus at my university, and I'm interested in purchasing an Apple TV. I've contacted our Tech Department, and they've said that the Apple TV would have to have WPA2 Enterprise Accessibility.

    The tech representative said she couldn't find anything about whether or not the Apple TV had such capabilities. Does anybody know whether or not the Apple TV can connect to WPA2 Enterprise networks?

    Furthermore, does anyone live on campus at a university using WPA2 Enterprise network and have experience with the Apple TV working or not working as promised?

    DB:2.53:Wpa2 Enterprise sm

    Without making many changes, I finally got it to connect. It took me 15 attempts to do so. As a Mac user, I use the Airlock widget to see the channels used by the neighbors. Most are on the same channel I was using; I gather it is the default. In the area of the state I live in, there are only two real service providers. That may have something to do with most people being on the same channel.
    I bought this for AppleTV3 for a relative, but since he cannot connect in the dorms, he gave it back.

  • RELEVANCY SCORE 2.53

    DB:2.53:Airport Connection Flakey With Wpa2-Enterprise sm


    I am currently experiencing issues while connecting a MacBook Pro running Leopard (10.5.8) to a wireless access point running OpenWRT and 2 wireless networks: 1 WPA2-Enterprise secured network and 1 open network.

    The issue occurs while the laptop is connected to the WPA2-Enterprise network and the laptop will loose wireless conectivity throught the day. In the wireless access point's logs, I see this:
    WPA: received EAPOL-Key 2/2 Group with unexpected replay counter

    Any thoughts on what may be wrong?

    DB:2.53:Airport Connection Flakey With Wpa2-Enterprise sm

    I am currently experiencing issues while connecting a MacBook Pro running Leopard (10.5.8) to a wireless access point running OpenWRT and 2 wireless networks: 1 WPA2-Enterprise secured network and 1 open network.

    The issue occurs while the laptop is connected to the WPA2-Enterprise network and the laptop will loose wireless conectivity throught the day. In the wireless access point's logs, I see this:
    WPA: received EAPOL-Key 2/2 Group with unexpected replay counter

    Any thoughts on what may be wrong?

  • RELEVANCY SCORE 2.53

    DB:2.53:Windows 7 Enterprise Does Not Detect Wifi Networks 77


    all the other cpus find them but this one......

    DB:2.53:Windows 7 Enterprise Does Not Detect Wifi Networks 77

    ...
    Are the latest drivers and software for the Wireless Network installed from the manufacturer of the Wireless network device and are you utilizing those?

  • RELEVANCY SCORE 2.53

    DB:2.53:Not Able To Connect To Wifi 802.1 kp


    I have an iPhone 4s, recently updated to 7.1.2. My office has WiFi connectivity but I am not able to connect. I tried connecting through WPA/WPA2/WPA enterprise/WPA2 enterprise, it connects after sometime but doesn't work after that. No internet connectivity at all.Though my small android phone connects easily, which connects through 802.1, but iPhone doesn't show any such option.

    DB:2.53:Not Able To Connect To Wifi 802.1 kp

    I still highly recommend talking to your IT department... we can only advise on how to do something. Just so you know, WPA/WPA2 Enterprise is 802.1X, they are one in the same, just a different name.

  • RELEVANCY SCORE 2.52

    DB:2.52:Wireless Issue With Windows 8 Upgrade On Asus Zenbook Ux31e-71 Not Able To Connect. 3k


    Upgraded my ASUS Zenbook UX31E-71 to Windows 8 having issues with corporate wireless network using WPA2 enterprise . My wirless adapter Qualcomm Atheros AR9485WB-EG Driver 3.0.0.130

    DB:2.52:Wireless Issue With Windows 8 Upgrade On Asus Zenbook Ux31e-71 Not Able To Connect. 3k

    try this solution it worked for me
    http://www.nous3.com/2012/10/31/how-to-connect-to-wifi-wpa-2-in-windows-8/
    but I am not responsible about any problems because the old driver not reallycompatible with windows 8
    hope microsoft or atheros fixing this problem enoughsuffering

  • RELEVANCY SCORE 2.52

    DB:2.52:Nokia C3-00 Wlan - Wpa2 Enterprise 33



    I just bought Nokia C3-00 and I was able to useits internet capability via WLAN at home . In my corporate office, we are using WLAN with WPA2 - Enterprise as security settings. This means you need to use you Windows Active Directory domain account to use the internet via WLAN. Something likeyou need touse username "DOMAIN\Account_Name" and type the password before you can connect to WLAN.

    When I checked the security settings option of WLAN on Nokia C3-00, it has no WPA2 - Enterpise.Is there any solution on how to have this WPA2 - Enterprise in Nokia C3 ?

    I am already using the latest device software as of this date, and still I did not see this feature.

    Please HELP.

    DB:2.52:Nokia C3-00 Wlan - Wpa2 Enterprise 33


    The C3-01 and X3-02 are also lacking this. I would recommend to use the "contact us" above so that Nokia will hear your need...

  • RELEVANCY SCORE 2.52

    DB:2.52:Connecting To Wpa/Wpa2 Enterprise Network x7


    I am trying to configure an Apple TV to connect to our corporate network. I have a service account in AD that I am using in the profile, have pointed to our cert and trusted it in the profile, selected WPA/WPA2 Enterprise, and selected PEAP as the 802.1X authentication. I have done this after going over the settings with our network security engineer. Everything looks correct. After installing the profile and connecting it to the TV, I can only get a 169.X.X.X address (should be our private WiFi network of 10.9.X.X. Has anyone successfuly done this?

    DB:2.52:Connecting To Wpa/Wpa2 Enterprise Network x7

    I am trying to configure an Apple TV to connect to our corporate network. I have a service account in AD that I am using in the profile, have pointed to our cert and trusted it in the profile, selected WPA/WPA2 Enterprise, and selected PEAP as the 802.1X authentication. I have done this after going over the settings with our network security engineer. Everything looks correct. After installing the profile and connecting it to the TV, I can only get a 169.X.X.X address (should be our private WiFi network of 10.9.X.X. Has anyone successfuly done this?

  • RELEVANCY SCORE 2.52

    DB:2.52:Appletv Drops Off Wifi sc


    My organisation has implemented AppleTV, created a WLAN specifically for it, mDNS snooping, etc. We have enabled the Multicast Vlan Feature so that devices on our internal and guest networks can see AppleTV devices from the AppleTV WLAN. The issue we have is that AppleTV devices randomly drop off the network and do not reappear unless they are restarted. I have checked timeout settings, DHCP lease time, firewall, etc, but had long success. Has anyone has any experience with the bonjour service and mDNS who may be able to point me in a direction to resolve the issue? Our WLC is the 5508 v7.6. Thanks

    DB:2.52:Appletv Drops Off Wifi sc

    My organisation has implemented AppleTV, created a WLAN specifically for it, mDNS snooping, etc. We have enabled the Multicast Vlan Feature so that devices on our internal and guest networks can see AppleTV devices from the AppleTV WLAN. The issue we have is that AppleTV devices randomly drop off the network and do not reappear unless they are restarted. I have checked timeout settings, DHCP lease time, firewall, etc, but had long success. Has anyone has any experience with the bonjour service and mDNS who may be able to point me in a direction to resolve the issue? Our WLC is the 5508 v7.6. Thanks

  • RELEVANCY SCORE 2.52

    DB:2.52:Config Iphone 4s For Wpa2-Enterprise cc


    How to configure an iPhone 4s for wpa2-enterprise

    DB:2.52:Config Iphone 4s For Wpa2-Enterprise cc

    How to configure an iPhone 4s for wpa2-enterprise

  • RELEVANCY SCORE 2.51

    DB:2.51:Issue With Connectify Not Working On The Computer. sf


    Interface name: Wi-Fi
    Driver : Intel(R) Wireless WiFi Link 4965AGN
    Vendor : Intel Corporation
    Provider : Microsoft
    Date : 8/15/2010
    Version : 13.3.0.137
    INF file : C:\Windows\INF\netwlv32.inf
    Files : 1 total
    C:\Windows\system32\DRIVERS\netwlv32.sys
    Type : Native Wi-Fi Driver
    Radio types supported : 802.11a 802.11b 802.11g
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protection supported : No
    Hosted network supported : No
    Authentication and cipher supported in infrastructure mode:
    Open None
    Open WEP-40bit
    Open WEP-104bit
    Open WEP
    WPA-Enterprise TKIP
    WPA-Enterprise CCMP
    WPA-Personal TKIP
    WPA-Personal CCMP
    WPA2-Enterprise TKIP
    WPA2-Enterprise CCMP
    WPA2-Personal TKIP
    WPA2-Personal CCMP
    Open Vendor defined
    Authentication and cipher supported in ad-hoc mode:
    Open None
    Open WEP-40bit
    Open WEP-104bit
    Open WEP
    WPA2-Personal CCMP

    DB:2.51:Issue With Connectify Not Working On The Computer. sf


    Hi Shiraz,

    You are most welcome.

    For the issue with the mHotSpot application, you may get in touch with their technical support and check with them. It could be some issue with that application.

    I would like to know if you were able to create a hotspot on the computer with the application that is included in the installed driver.

    If you need any further assistance regarding Windows Operating System, you may always post your query on Microsoft Community Forums and we’ll be glad to assist you further.

  • RELEVANCY SCORE 2.51

    DB:2.51:Configurator Appletv Wpa2 Enterprise z1


    HelloI have been given two 3rd gen AppleTVs (A1469) to join to a schools WPA2 Enterprise wifi network which access the internet through a proxy. I just have a couple of questions about which options to check when using Configurator to apply a profile as my previous attempts to join these devices to this network have been unsuccessful and I'm not entirely sure why. The AppleTVs have had the latest software up-date applied (6.0.1) and I am running configurator on OSX Maverics. My first question pertains to proxy settings. Should I enter information in the Global HTTP Proxy payload or put it in the WiFi payload, or both? My second question is in regards to the WiFi payload. Are these settings going to work? Here are the settings I have entered so far:SSID: SWIRELESS-5Hidden Network (unchecked)Auto Join (checked)Proxy Setup: ManualHostname or IP Address, and port number for the proxy server: PROXY:8080 (n.b., the host name of their proxy really is 'PROXY')Authentication: BLUE\iPad (n.b. they log onto a domain called 'BLUE' and the account that any iOS device joining the network must use is called 'iPad')Password: **********Security Type: WPA / WPA2 EnterpriseProtocols: [I'm not sure which protocols to use here and may need to speak to the sites admin, unless anyone can tell me a way to probe for it the next time I am in range of their wireless network)Trust: [If I'm not wrong, I need to copy the wireless certificate from my MacBookPro keychain which has already joined the network to here by loading it in the Certificates tab]And I THINK that's just about it. Are there any other tabs I should be opening up to configure payloads for?RegardsSt0m

    DB:2.51:Configurator Appletv Wpa2 Enterprise z1

    i have a similar setup, what protocols did you use?

  • RELEVANCY SCORE 2.51

    DB:2.51:Time Capsule / Apple Tv Doesn't Work With Enterprise zz


    I realize that I'm probably beating my head against a brick wall, but i'll try this anyway:

    I have an iMac, time capsule, and appleTV. Unfortunately, I live on Northwestern's campus where we only have internet access through a WPA2:Enterprise wireless connection. Is there anyway for me to temporarily give my AppleTV and/or Time Capsule access to my connection through Internet Sharing or some other means or will I be subjugated to taking them off-campus for updates and (on appleTV) initially setup my iTunes account?

    My intial thought was to share from my airport to ethernet in internet sharing and see if it would share to my AppleTV. So far, no-go, but perhaps I have the settings wrong...

    Any ideas?

    DB:2.51:Time Capsule / Apple Tv Doesn't Work With Enterprise zz

    I realize that I'm probably beating my head against a brick wall, but i'll try this anyway:

    I have an iMac, time capsule, and appleTV. Unfortunately, I live on Northwestern's campus where we only have internet access through a WPA2:Enterprise wireless connection. Is there anyway for me to temporarily give my AppleTV and/or Time Capsule access to my connection through Internet Sharing or some other means or will I be subjugated to taking them off-campus for updates and (on appleTV) initially setup my iTunes account?

    My intial thought was to share from my airport to ethernet in internet sharing and see if it would share to my AppleTV. So far, no-go, but perhaps I have the settings wrong...

    Any ideas?

  • RELEVANCY SCORE 2.51

    DB:2.51:Wireless Issue With Windows 8 Upgrade On Asus Zenbook Ux31e-71 Not Able To Connect. 93


    Upgraded my ASUS Zenbook UX31E-71 to Windows 8 having issues with corporate wireless network using WPA2 enterprise . My wirless adapter Qualcomm Atheros AR9485WB-EG Driver 3.0.0.130

    DB:2.51:Wireless Issue With Windows 8 Upgrade On Asus Zenbook Ux31e-71 Not Able To Connect. 93

    Hi,

    Thank you posting in Microsoft Community!

    The issue you have posted is better suited for TechNet forums. I would suggest you to post the question at the link mentioned below for help.

    http://social.technet.microsoft.com/Forums/en-US/category/w8itpro

    Please post us if you need assistance on Windows.

  • RELEVANCY SCORE 2.50

    DB:2.50:Wifi Wpa2 Enterprise Authentication. Why Second Window Appears? 8c


    Hi All,I'm connecting to WiFi network. It requires WPA2 enterprise credentials:If I enter wrong password - second window appears:If I enter correct password on the second window it doesn't change anything. It tells that password is invalid.Do you know why the second window appears and what for?

    DB:2.50:Wifi Wpa2 Enterprise Authentication. Why Second Window Appears? 8c

    Hi All,I'm connecting to WiFi network. It requires WPA2 enterprise credentials:If I enter wrong password - second window appears:If I enter correct password on the second window it doesn't change anything. It tells that password is invalid.Do you know why the second window appears and what for?

  • RELEVANCY SCORE 2.50

    DB:2.50:Cannot Switch Between Wpa2 And Wpa Enterprise Wifi Locations. 1d


    Hello Everyone,

    I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it looks as if that the Airport express resets but does not let go of the active location. I have to manually turn airport off and then on again to have it kick in. Anyone experience this and have a work around?

    Thanks in advance,

    K.

    DB:2.50:Cannot Switch Between Wpa2 And Wpa Enterprise Wifi Locations. 1d

    Hello Everyone,

    I have two Wifi locations I use, a WPA2 and a WPA Enterprise. When I switch locations from one to the other it looks as if that the Airport express resets but does not let go of the active location. I have to manually turn airport off and then on again to have it kick in. Anyone experience this and have a work around?

    Thanks in advance,

    K.

  • RELEVANCY SCORE 2.50

    DB:2.50:Nokia Lumia 720 Does Not Connect With Secure Wifi dx



    Nokia Lumia 720 does not connect with secure wifi network. The details of my phone and the details of the secure wifi network is given below:

    NOkia Lumia 720 (details):

    OS Version: 8.0.10517.150

    Firmware revision number: 3056.40000.1349.2003

    Hardware revision number: 1.0.0.0

    Secure wifi network (details)

    Security type: WPA2- Enterprise

    Encryption type: AES

    Network Authentication method: Microsoft Protected EAP (PEAPv0) with EAP-MSCHAPv2

    Please guide me what should I do to connect secure Wifi on my Nokia Lumia 720.

    Note: I am able to connect wifi at home using WPA2-Personal but I am unable to connect with secure wifi WPA2-Enterprise.

    I will be grateful for your help.

    Thanks

  • RELEVANCY SCORE 2.50

    DB:2.50:9550 Wpa2-Enterprise Aes Certificate. c3



    Hello,

    I am planning on getting a storm 2 on the verizon network. Now my school gives me free wifi over the entire campus, which I plan to use instead of getting a data plan with verizon since $30/month isn't worth it to me if I have free wifi 90% of the time.

    I'd like to know if anyone knows for a fact that the storm 2 can connect to a WPA2-enterprise AES certificate based network.

  • RELEVANCY SCORE 2.49

    DB:2.49:Wifi Drivers That Support Wpa2-Enterprise, Peap Nd Gtc sz



    Hello -

    Have Surface Pro 3.

    Trying to connect to our enterprise WiFi network and need to have WPA2-Ent/PEAP/GTC. Is there a driver that supports this? I see WPA2 and PEAP but no choice for GTC.

    My old laptop with Intel ProSet did, but don't see anything obvious for Marvell.

    tx

    DB:2.49:Wifi Drivers That Support Wpa2-Enterprise, Peap Nd Gtc sz


    Hello -

    Have Surface Pro 3.

    Trying to connect to our enterprise WiFi network and need to have WPA2-Ent/PEAP/GTC. Is there a driver that supports this? I see WPA2 and PEAP but no choice for GTC.

    My old laptop with Intel ProSet did, but don't see anything obvious for Marvell.

    tx

  • RELEVANCY SCORE 2.49

    DB:2.49:Problems With Wpa2 Enterprise Connection Wifi pj



    I got an xperia M (c1905) 15.1.C.2.8 firmware android 4.1.2My problem is I can't always connect to the corporate wifi.Sometimes i connect, sometime i cannot. Operation to do for connection are: erase and reconfigure network or retype password reconfiguring connection, and may be it work properly.

    This problem usually appens after a wpa / wpa2 psk connectionsMy settings areSid UNIVAIR-WPA2 or EDUROAMSECURITY 802.1x EAPEAP METHOD: PEAPpHASE 2 AUTHENTICATION: MSCHAPV2CA certificate - UNSPECIFIEDClient certificate - UNSPECIFIEDIdentity - MYPERSONALIDpassword - personal passwordCA certificates needed are AddTrust AB (AddTrustExternal CA Root) and The USERTRUST Network (UTN-USERFirst Hardware) both included in phone trusted CAWe can use either another network SID Eduroam (international roaming wifi) but I've the same problem.My previous smartphone did not have this problem, and all other devices works properly.I upgrade firmware to 15.4.A.0.23 but the problem was not solved so I downgrade to previous version firmware.Any suggest??I've posted this topic one month ago but no Sony member or developer give me a reply, so i'll post this topic many many times.

    DB:2.49:Problems With Wpa2 Enterprise Connection Wifi pj


    Yesterday after submitting the previous message I went from work to home. When I arrived home I checked

    the contentof wpa_supplicant.conf and the password of the Enterprise network to which I was previously

    connected at work was stillthere, although the phone had automatically connected to my home network.

    So I did a test: I specifically connected to a neighbour network via the wifi settings panel. In the precise

    moment I connected to that network the password of the Enterprise network was deleted from the

    wpa_supplicant.conf file. I checked the log and I found the following log entries:

    D/WifiNative-wlan0( 8727): doBoolean: ENABLE_NETWORK 3D/WifiNative-wlan0( 8727): doBoolean: AP_SCAN 1D/WifiNative-wlan0( 8727): doBoolean: SAVE_CONFIGD/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 ssid "xxxxxxx"D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 key_mgmt WPA-EAP IEEE8021XD/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 proto WPA RSND/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 pairwise TKIP CCMP SMS4D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 group WEP40 WEP104 TKIP CCMP SMS4D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 priority 2000023D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 eap PEAPD/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 phase2 "auth=MSCHAPV2"D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 identity "xxxx@yyyy.zzz"D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 password NULLD/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 engine 0D/WifiNative-wlan0( 8727): doBoolean: SET_NETWORK 2 ca_cert "keystore://CACERT_cacert"

    The ENABLE_NETWORK 3 is the connection to myneighour network, but then the phone makes

    a SAVE_CONFIGof network 2 which is the Enterprise network !!! The password is set to NULL !!!!

    Could it be that somehow WifiNative looses the password content ?and when tries to save it is nil

    and thus the password entry is not saved ?

    I think this is the exact same problem reported in this thread by mautra.

    This seems a real BUG please SONY have a look at it !!!

  • RELEVANCY SCORE 2.48

    DB:2.48:The Wnce2001 Wpa2-Enterprise 9d


    We have several Netgear WNCE2001 WiFi adapters.

    Does anyone know if there is a planned firmware upgrade to support WPA2-Enterprise with network authorisation through PEAP ?

    Mike Whyte

    DB:2.48:The Wnce2001 Wpa2-Enterprise 9d

    I doubted but ask support at my.netgear.com and may want put your future enhancement request

  • RELEVANCY SCORE 2.48

    DB:2.48:Wifi Scanning Wont Find Wpa2-Eap Networks xd



    I have a ZTE Open. If I go to Settings-Wifi, most of the wifi networks are not there. In particular, a WPA2-EAP which I need to use.

    Thanks

    DB:2.48:Wifi Scanning Wont Find Wpa2-Eap Networks xd



    There is hope that this problem will be fixed with version 1.3, but this will take a while. Look at the answers to this question

    https://support.mozilla.org/en-US/questions/977417?esab=as=WPA+Enterpriser=0as=s

  • RELEVANCY SCORE 2.48

    DB:2.48:Wg311v3 And Wpa2 Enterprise mx


    Is wg311v3 compatible with WPA2 enterprise. I see only WPA2 PSK option in Netgear Manager...

    DB:2.48:Wg311v3 And Wpa2 Enterprise mx

    Only WPA-PSK according to the firmware.

  • RELEVANCY SCORE 2.48

    DB:2.48:Issue Connecting Touchpad To Wpa2 Psk Network 7s



    I have an issue connecting my touchpad to any WPA2 PSK networks. The SSID is broadcast and other devices can connect but the touchpad errors with "unable to associate" even though I typed in the correct password. Any help is appreciated, and no I do not want to change the network settings since this device is supposed to utilize WPA2.





    Post relates to: HP TouchPad (WiFi)

    DB:2.48:Issue Connecting Touchpad To Wpa2 Psk Network 7s


    This issue was resolved with the latest update v.3.0.4. It was released this past week.

  • RELEVANCY SCORE 2.48

    DB:2.48:Cannot Connect To Wpa2-Enterprise Network With Broadcom Bcm4352hmb 802.11ac 2x2 Wifi df



    HP Envy 15t-J100 using BCM4352HMB 802.11ac 2x2 WiFi driver version 6.30.223.221 on Windows 8.1 Pro 64-bit.

    I get an error trying to connect to my work wireless network with "Can't connect to this network." using WPA2-Enterprise authentication.

    The network is shown in the list of available networks andprompts for my credentials (UserID Password), so it is attempting to connect to it.

    A co-worker next to me has no problems with Win8.1, but has a 802.11n chipset (not -ac).

    I connect fine to my home network (802.11n) using WEP protocols.

    I saw a post that it may be athat this drivertries to initally connect with COMPUTER name instead of USER? It suggested downgrading to a Win7 64-bit but I'm not finding a driver that I'm willing to try.

    In the network setup (802.1x Settings), I've set SPECIFY AUTHENTICATION MODE = "User Authentication" without success.

    DB:2.48:Cannot Connect To Wpa2-Enterprise Network With Broadcom Bcm4352hmb 802.11ac 2x2 Wifi df


    Solvedthe problem by installing the Win7-specific driver version 6.30.223.9 (sp64737).

    I can now connect to WPA2-Enterprise through Cisco Access Points.

    Driver is here:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMains...

    Solution found in this post:

    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-Software-Recovery/Windows-7-x64-Envy-700-109c...

  • RELEVANCY SCORE 2.48

    DB:2.48:Connecting Z10 To Wpa2-Enterprise Wifi kp



    Haloo...

    Please help by giving any clue to connecting Blackberry Z10 to Office Wifi which is using WPA2-Enterprise security type.

    Thank you in advanced

    Regards,

    Tri Harnoko

    DB:2.48:Connecting Z10 To Wpa2-Enterprise Wifi kp


    Did anybody ever discover a fix for this? I am having the exact same problem and have tried everything I can think of. I manage the enterprise wireless system where I work, and my Z10 is the only device type that cannot connect. The problem only started after I updated to BB OS 10.2. Previously, I was able to connect.

  • RELEVANCY SCORE 2.47

    DB:2.47:Wpa2-Enterprise Support Yet? 17


    When will Apple TV support WPA2-Enterprise logins?

    DB:2.47:Wpa2-Enterprise Support Yet? 17

    When will Apple TV support WPA2-Enterprise logins?

  • RELEVANCY SCORE 2.47

    DB:2.47:Wifi Wpa2 Enterprise Not Workign dz



    Hi

    I am the network administrator of Wi Fi over Enterprise, we have now 100 users trying to connect with Playbook but it have not been posible. we use WPA2 Enterprise EAP-TLS. First it was very dificult to download the cert to the device, We have accomplish that but we have not been able to connect toour network.

    we use GeoTrust Global CA and Equifax Secure Certificate Authority.

    Thanks in advance.

    DB:2.47:Wifi Wpa2 Enterprise Not Workign dz


    I was following directions to 'Connect Manually' and entered PEAP but did not see the place to enter 'MS-CHAPv2' (the Inner Security Link).

    If you access the the Wi-Fi setup from the Home page Setup icon, IT WILL NOT HAVE THIS REQUIRED OPTION. You need to access the wireless wi-fi setup from the home screen- tap on the wi-fi fan symbol, tap again wi-fi fan in the box (maybe a downward swipe from the top right wifi symbol will get you there as well.

    Again- DO NOT TRY TO ACCESS WIFI from the SETUP icon. If after choosing 'WPA2 Enterprise' you don't see the Inner security link option, go back and access the setup so you do see it.

    Very bad user interface design, I am not impressed. Playbook 32GB. It now[UPDATE- VERY RARELY or never]connects to our secure network but drops the connection much more often than any of our Android or other (mainly Apple) devices. We are very unhappy.

  • RELEVANCY SCORE 2.47

    DB:2.47:Ht4718 Would I Be Able To Use The Lion Internet Recovery Since My College Uses Wpa/Wpa2 Enterprise Wifi? ka


    would i be able to use the lion internet recovery since my college uses WPA/WPA2 Enterprise wifi? Im confused becasue this exact one is not listed under apples page about os x recovery.

  • RELEVANCY SCORE 2.47

    DB:2.47:Windows Phone 7 Can Not Connect To Enterprise Wifi 3a


    Hi everyone,
    Not sure any of you guys out there have come across the problem or not, but I have an HTC Mozart phone which I'm trying to connect to our corporate WiFi. Our corporate wifi has Enterprise WPA2 security using 2 private root certifates. I've forwarded both
    root certs to my phone via email and have "installed" them, but when I try to connect to the WiFi, Iget the message "Your phone Couldn't reach wifi network..."
    The phone has no problems connecting to my home wifi, and my Uni wifi uses a public cert from GoDaddy and it works fine....
    Has anyone got WP7 to connect to an enterprise wifi with this type of security...
    Cheers
    Sonjoy

  • RELEVANCY SCORE 2.47

    DB:2.47:Wap 200 Wpa2-Enterprise Problem j8



    Hi all!

    We have more than 50 wap 200 access points. In our configuration we use wpa2-enterprise security mode with radius server. And use latest firmware(2.0.2.4). All works good, but after random time period (2 hours - one day) wifi access with wpa2-enterprise stops working (client can't connect).  After reboot wap200 all becomes good.

    Access with wpa2-personal works good all the time.

    Excuse me for my english

    DB:2.47:Wap 200 Wpa2-Enterprise Problem j8


    Hello,

    The question I have for everyone is what device is doing Radius?

    We also need the following data:

    A syslog capture of the event (Where the Radius authentication stops working). This syslog needs to capture prior, during and after the event.

    We also need a Packet capture between the WAP200 and the network, or the Radius server and the network. This needs to be done during the event, and after the reboot when the authentication starts working again.

    The time and date for both captures need to be the same, so please have the time on both captures the same. It would also be helpful for any Radius logs.

    If using Windows Radius with Active Directory we will also need the logs from the License server PKI environment for that period of time.

    Once someone has this they will need a call into the Small Business Support number at 1-866-606-1866 and a current case will need to be created. At that point we will be able to analyses the data and forward the case on if we can't determine the root cause is the WAP and not a Licensing, Radius, or Configuration settings.

    Thanks,

    Cisco Small Business Support Center

    Randy Manthey

    CCNA, CCNA - Security

  • RELEVANCY SCORE 2.47

    DB:2.47:Does Apple Tv Connect To Wpa2-Enterprise? pf


    I am considering buying AppleTV for my dorm room, but have no idea if it will be able to connect tomy school's wifi. The schools has WPA2-Enterprise wifi, and to be honest I don't really know what that means, I just know it was an inconvience and took a lot of work to get my phone and ipad to be able to connect at the beginning of the year. So I just want to check if AppleTV is compatible with this setup before spending the money.No idea if this will be anyhelp, but here's the info for the school's wifi:http://www.itcom.itd.umich.edu/wireless/connect/unsupported.phpThanks in advanced for any help.(Also sorry if this has already been asked/answered, I couldn't find it anywhere)

    DB:2.47:Does Apple Tv Connect To Wpa2-Enterprise? pf

    I am considering buying AppleTV for my dorm room, but have no idea if it will be able to connect tomy school's wifi. The schools has WPA2-Enterprise wifi, and to be honest I don't really know what that means, I just know it was an inconvience and took a lot of work to get my phone and ipad to be able to connect at the beginning of the year. So I just want to check if AppleTV is compatible with this setup before spending the money.No idea if this will be anyhelp, but here's the info for the school's wifi:http://www.itcom.itd.umich.edu/wireless/connect/unsupported.phpThanks in advanced for any help.(Also sorry if this has already been asked/answered, I couldn't find it anywhere)