• RELEVANCY SCORE 5.02

    DB:5.02:Need Tester For Torrent Client With Bis-Enabled Blackberry Phone. ka





    I need to test BIS transport on my application(torrent client for BB).




    ------------------------------------------------- Torrent client for blackberry phones DjVu reader for blackberry phones

  • RELEVANCY SCORE 3.51

    DB:3.51:Torrent Client In Firmware ? 1x




    Linksys when you make a firmware with torrent client?

    DB:3.51:Torrent Client In Firmware ? 1x

    Linksys when you make a firmware with torrent client?

  • RELEVANCY SCORE 3.46

    DB:3.46:2 Final Questions 7x




    Sorry for all the threads asking questions, im almost set on a Mac Mini.

    1. Are there any good torrent clients, such as Bitlord, Bitcomet. And will .torrent files work on Mac, as long as I have a Mac Torrent Client?

    2. If I get the wireless keyboard and mouse, can I setup my Mac when I get it? Sometimes with wireless things, you need to run software to configure it, and I wouldnt be able to configure it, if I dont have the keyboard/mouse set up.

    DB:3.46:2 Final Questions 7x

    Yes, there are good BT clients for Mac.

    I used Azereus on windows, and it runs just fine under Mac, since it's java.

    You can also search for Transmission and Acquisition

  • RELEVANCY SCORE 3.36

    DB:3.36:How Can I Prevent A Downloaded File To Launch An Application ? z3


    Dear MacGurus :-)When I download a .torrent file with Chrome or Safari, the uTorrent client is launched.I would rather have the .torrent file ONLY downloaded and then launching the torrent client manually at a later time (if needed).How can I achieve this ?TIA

    DB:3.36:How Can I Prevent A Downloaded File To Launch An Application ? z3

    Dear MacGurus :-)When I download a .torrent file with Chrome or Safari, the uTorrent client is launched.I would rather have the .torrent file ONLY downloaded and then launching the torrent client manually at a later time (if needed).How can I achieve this ?TIA

  • RELEVANCY SCORE 3.29

    DB:3.29:New To Dsl.- Help With Torrent Client zc



    Just switched over to DSL from cable. I am using the 6100F modem that was shipped to me , connected from phone jack to modem to ethernet port in comp. Everything seems to being running as fast as my cable interent.

    I am confused about the connections that areinternal - broadband and LAN. When I go into them I seem to have 2 different ISP's and the socket packet transfer in LAN connection is what is showing. Has ethernet connection as unknown. I am trying to download/upload torrent files with Vuze. I am getting great download speeds and it seems to upload but says my portsare closed.

    I am new to DSL and not sure how it should be set up for use like that. My interent is running great so I am happy with that.

    DB:3.29:New To Dsl.- Help With Torrent Client zc


    You may need to go into the modem itself and forward a port for Vuze. Try going to www.portforward.com and following their guide for your modem/router to forward ports.

    Good Luck

  • RELEVANCY SCORE 3.28

    DB:3.28:Wd My Net N900 Centeral As A Torrent Client..!! mf



    Hello every one .

    I have a quistion..!

    Is it possible to make my router works as a torrent client (Download torrents directly from internet without PC).

    Thanks

    DB:3.28:Wd My Net N900 Centeral As A Torrent Client..!! mf


    Yes, it is possible, but never was officially supported by the manufacturer, so you are on your own.

  • RELEVANCY SCORE 3.12

    DB:3.12:Bit Torrent Client Vpn Service 8m


    If I subscribe to a VPN service like Private Internet Access will I be able to configure the Stora torrent client to use the service?

    DB:3.12:Bit Torrent Client Vpn Service 8m

    Is that a It's not possible on the device or is that a requires a talent you as an end user probably do not possess?

  • RELEVANCY SCORE 3.04

    DB:3.04:Is There Any Good Torrent Client For Ipad To Use? 8k


    Any idea?

    DB:3.04:Is There Any Good Torrent Client For Ipad To Use? 8k

    Have you tried troubleshooting why you can't sync iTunes movies to your iPad? It works just fine for me. Your best bet would be to start your own thread with an approprately descriptive subject. Be sure to include exactly what your doing, what error messages you're seeing and what steps you've already taken to troubleshoot the issue.

    Best of luck.

  • RELEVANCY SCORE 3.02

    DB:3.02:Transmission Update 3f


    How I can update my version of Transmission client?

    In the preferences section in the torrent section puts that I have version 1.92 (10,363) but the upgrade option says I have the upgraded system .

    I have the problem that the torrent will slow and from the PC with utorrent go faster.

    Can you tell me how I can speed up my downloads?

    I appreciate your help .

    A greeting.

    DB:3.02:Transmission Update 3f

    Thanks for your answer. I hope to find in this site everything about Satora and can help me in my settings.

    I'm also very happy with the performance of this device and I would like to get the most performance possible.

    A pleasure to be in this forum. Thank you.

  • RELEVANCY SCORE 3.02

    DB:3.02:Problem With 2009.02 Torrents And Firefox (Firefox Bug ?) j8



    when i download any torrent files for 2009.02 with firefox (simply cliking on the link of the torrent), i end up with an empty file with 400 permission. (in /tmp)

    i need to use download link target here to get a valid torrent file. (i even have to do it twice ??)

    so i guess its a bug in firefox ?or something is wrong on the ftp site of archlinux ? why the torrent are not provided via http ?

    DB:3.02:Problem With 2009.02 Torrents And Firefox (Firefox Bug ?) j8


    Does it still happen if you save them somewhere instead?Cause it doesnt here.. ls -al archlinux-2009.02-2-ftp-i686.img.torrent -rw-r--r-- 1 foo users 9457 2009-03-06 12:56 archlinux-2009.02-2-ftp-i686.img.torrent

    Nevermind you already explained that.I suggest you ask in some mailing list.

    Last edited by dolby (2009-03-06 11:00:10)

  • RELEVANCY SCORE 3.00

    DB:3.00:Problems With Transmision Torrent Client 81


    Dear all,I have Iomega EZ-3 and on it running transmission torrent client.lenovoemc_Torrent 3.2.19250 Up to dateThe problem is the destination of downloaded torrents. It's not on desired destination. On selected folder 2 subfolders were created - "add torrents here" and "incomplete". And when torrent is downloaded, there is no file. In web gui double click on torrent gives some additions informations:Location:/mnt/pools/A/A0/Documents/DownloadsWhere is this location and how can I access it? I have a lot more problems with built-in torrent download client so this one problem should be easier to solve... I have latest firmware on Iomega EZ-3:4.0.8.23976Kind regards,Ziga

    DB:3.00:Problems With Transmision Torrent Client 81

    I'm not sure why the completed file would not end up in the destination folder. Have you searched the all the folders on the device to see if it ended up in another folder somehow? The built-in torrent client has some issues on some devices, which is why we added support for Transmission.

    Maybe try asking their support forums? - https://forum.transmissionbt.com/



    Have questions and need answers? Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!LenovoEMC Support DownloadsLenovoEMC North America Support Contact Page

  • RELEVANCY SCORE 2.99

    DB:2.99:File Associations? jm


    Hi; How do I access a list of file types and the programs that are used to open them? Also How do I choose what icon a file type has?

    It's just that I installed a torrent client 'Azureus'; and although I've set it to open .torrent files, and they show up with Azureus' icon, it won't open them...

    DB:2.99:File Associations? jm

    Wouldn't know why it should not work with Azureus, but I don't use the program so I'm not familiar with its requirements. Perhaps not all .torrent files are the same.

    Why reward points?(Quoted from Discussions Terms of Use.)

    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.

    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • RELEVANCY SCORE 2.98

    DB:2.98:Torss - Downloads Selected Torrents From Rss Feeds 79



    I often have a problem with various private torrent trackers that by the time I add to torrent to my client it has already been active for a long time and I struggle to maintain a good ratio. As such I wanted something which could scrape the trackers RSS feed, find torrents that match various patterns and download the torrent files to a folder for my torrent client to pick up.

    So I wrote torss. Its quite simple, but it does what I need it to do. The user defines some rules, decides which getter to use (each RSS feed has its own getter) and runs torss with those settings (likely from cron).

    Help:
    $ torss -h
    Usage: /usr/bin/torss -g getter [OPTIONS]...
    torss is parser of RSS feeds which downloads files referenced in the RSS if the
    title of the entry matches given rules.
    -g, --getter getter script to use
    -r, --rules rules file to use
    -d, --destination destination path to save torrents to
    -i, --history history file to use
    -h, --help help

    The rules file must contain an array named rules containing at least one entry.
    These entries should be regular expressions (for grep -Ei) for torrent titles
    to be downloaded. See /etc/torss/rules.sample

    The getter script will be looked for in ~/.config/torss/getters/, then
    /etc/torss/getters/ and finally as a file referenced from the CWD. This means
    you can pass either simply the filename or the absolute/relative path.

    The destination path will usually be a folder where your torrent client
    automatically picks up torrent files.

    The history file is used to ensure the same torrent isnt downloaded multiple
    times, as such it should, for normal use, be left as the default value.

    DB:2.98:Torss - Downloads Selected Torrents From Rss Feeds 79


    I often have a problem with various private torrent trackers that by the time I add to torrent to my client it has already been active for a long time and I struggle to maintain a good ratio. As such I wanted something which could scrape the trackers RSS feed, find torrents that match various patterns and download the torrent files to a folder for my torrent client to pick up.

    So I wrote torss. Its quite simple, but it does what I need it to do. The user defines some rules, decides which getter to use (each RSS feed has its own getter) and runs torss with those settings (likely from cron).

    Help:
    $ torss -h
    Usage: /usr/bin/torss -g getter [OPTIONS]...
    torss is parser of RSS feeds which downloads files referenced in the RSS if the
    title of the entry matches given rules.
    -g, --getter getter script to use
    -r, --rules rules file to use
    -d, --destination destination path to save torrents to
    -i, --history history file to use
    -h, --help help

    The rules file must contain an array named rules containing at least one entry.
    These entries should be regular expressions (for grep -Ei) for torrent titles
    to be downloaded. See /etc/torss/rules.sample

    The getter script will be looked for in ~/.config/torss/getters/, then
    /etc/torss/getters/ and finally as a file referenced from the CWD. This means
    you can pass either simply the filename or the absolute/relative path.

    The destination path will usually be a folder where your torrent client
    automatically picks up torrent files.

    The history file is used to ensure the same torrent isnt downloaded multiple
    times, as such it should, for normal use, be left as the default value.

  • RELEVANCY SCORE 2.95

    DB:2.95:Torrent Client ac


    is there any torrent download client that is compatible with x6?? Plz post the downloa link if found any
    I tried symtorrent but its not compatible with x6 as it shows while installation...., i forced the installation but could only find it not connecting to the tracker thus not downloading anything






    Solved!
    Go to Solution.

  • RELEVANCY SCORE 2.94

    DB:2.94:Cant Set Utorrent As Default .Torrent Associated Program. ks


    I cant set uTorrent as my default .torrent program.
    .torrent doesnt exist on the list for "Associate a file type or protocol with a program".
    I have to drag the files into the uTorrent window to open the files.
    How can I make utorrent my default torrent program?

    DB:2.94:Cant Set Utorrent As Default .Torrent Associated Program. ks

    Thanks to SpiritX for this link
    How to Add a Program to "Open With" in Vista and Windows 7
    http://www.vistax64.com/tutorials/126340-open-add-program.html

  • RELEVANCY SCORE 2.94

    DB:2.94:Not Having Torrent Client Apps In Blackberry App World ja



    BlackBerry App World Not having any torrent client apps so when we expect torrent apps been listed in blackberry App World

    DB:2.94:Not Having Torrent Client Apps In Blackberry App World ja


    Look at bbtor.net. But now this aplication works only on BB phones, not PB. For playbook search in google application playtorrent.




    ------------------------------------------------- Torrent client for blackberry phones DjVu reader for blackberry phones

  • RELEVANCY SCORE 2.94

    DB:2.94:Bsod After Torrent Started Bad_Pool_Caller Windows 8.1 Pro Wmc 64, With Ralink Rt3290 dz


    Dear Friends,
    My laptop is fujitsu LH522, when I start download content via torrent after 2 hours or less some random crashes error occurs while downloading data,
    But that many often occurred is BAD_POOL_CALLER

    to solve this problem, I have tried to change torrent client software, downgrade or upgrade wifi driver, and disable/enable terredo tunneling but there is no result
    here is my laptop's spec:
    - AMD APU e2-1800
    - AMD Radeon 7340 HD
    - RAM DDR3 2GB
    - Wifi Ralink rt3290 b/g/n
    I used windows defender, no other else third party anti virus software,

    and this is my minidump.
    Please I need help to resolve this problem. regards

    DB:2.94:Bsod After Torrent Started Bad_Pool_Caller Windows 8.1 Pro Wmc 64, With Ralink Rt3290 dz

    My pleasure, glad to hear!

    If and when you are comfortable and feel your issue has been solved, I'd recommend marking any posts of mine that answered your question as answered so this thread no longer shows up as requiring an answer.

    Regards,

    Patrick

  • RELEVANCY SCORE 2.90

    DB:2.90:Issues With The Latest Deluge (1.3.5-4) mj



    I had to downgrade back to 1.3.5-3 because I kept seeing this error on a torrent tracker:

    Tracker status: the_trackers_name: Error: Banned or out of date client.

    DB:2.90:Issues With The Latest Deluge (1.3.5-4) mj


    It was a (shameless) attempt to bump it up. Yeah, yeah, bumping is not allowed... I know.

    Screw it. Im filing a bug report. It will probably get better attention than here anyway.

  • RELEVANCY SCORE 2.90

    DB:2.90:[Solved] Torrent-Like File Copy 98



    The thing is i have very unreliable usb flash and it will always copy larger files with error or two (bad chip or overheating idk) but once file is copied it will always read it correctly so it is useful for smaller files...

    I am wandering if i could somehow copy file in a manner like torrent client downloads large files, i mean dividing a file in a small chunks and generate checksum of every chunk, then copy chunk by chunk on the flash drive while checking its checksum on destination and when error occurs overwrite that chuck and so on... I know i can simply add it to archive and then split it to smaller pieces but i need whole file on a flash...

    Any ideas?

    Last edited by stundrum (2013-10-02 22:36:27)

    DB:2.90:[Solved] Torrent-Like File Copy 98


    Thanks all for great suggestions, ive ended up with coping file to pendrive and doing file comparison with hex editor and overwriting bad blocks but i will sure check out your solutions in a future.

  • RELEVANCY SCORE 2.90

    DB:2.90:What Type Of Traffic Is This? Torrent? p7



    I have a client that I believe is using bit torrent and they just keep requesting more bandwidth, here is a picture of the torch from winbox on the client.

    How would you handle it?










    Attachments:




    DB:2.90:What Type Of Traffic Is This? Torrent? p7


    who is requestion more bandwidth? The Parents? You could tell them that the jave plenty for normal use, that you would be glad to sell them more if they like, but that you can see someone is using p2p filesharing and that is eating up the connection...

  • RELEVANCY SCORE 2.90

    DB:2.90:Torrent Client For Blackberry 9700 Os 6.00 ck



    hey hi..want to know whether i can install a torrent client on my bb, if yes so which one is good...







    Solved!
    Go to Solution.

    DB:2.90:Torrent Client For Blackberry 9700 Os 6.00 ck


    Try BBtor. You can find it here




    ------------------------------------------------- Torrent client for blackberry phones DjVu reader for blackberry phones

  • RELEVANCY SCORE 2.89

    DB:2.89:Wrt120n And Torrent Bandwidth Problems j3



    Hey guys,

    I have one small problem and maybe you can help out:

    Tested to speedtouch.net my router shows a great download and upload rate (no difference between direct connection and reouter connection). The problem is when I try to download something using a torrent client:

    Without the router I'm getting over 10MB/s downloading a torrent

    With the router installed I'm getting maximum 2,5MB/s when downloading the same torrent

    It's like it's limiting my download speed when it comes to torrents. I have tried port forwarding and static IP but it makes things worse, from 2,5MB/s the speed drops to 1,8MB/s.

    If you have any ideas, or encountered the same problem as I did and managed to make it work please let me know how you did it.

    Thanks a lot guys







    Solved!
    Go to Solution.

    DB:2.89:Wrt120n And Torrent Bandwidth Problems j3


    To setup port forwarding on this router your computer needs to have a static ip address. (if you don't know how to do this then google it)

    Also you need to set up the static port you want utorrent to use (Options-Preferences-Connection-Port used for incoming connections; uncheck Randomize port each start)

    Open a web browser like internet explorer or firefox. Enter the ip address of your router in the address bar of your browser.By default the ip address should be set to 192.168.1.1.

    You should see a box prompting you for your password. Enter your password now. By default your password is admin. Click the Ok button to log in to your router.

    Click the Applications Gaming link near the top of the page.

    This router has two different sections that allow you to forward ports. One section allows you to forward a range of ports, and the other allows you to forward a single port. To forward a range of ports, click Port Range Forwarding.

    Enter the name of the program into the Application Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. If you are forwarding a single port, enter that port number into the Start Port and the End Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the Start Port box. Then enter the highest number of that range into the End Port box. Use the Both drop down box to select the protocol type of the ports you are forwarding. Enter the ip address to forward these ports to into the To IP Address box. If you are forwarding ports so you can run a program on your computer, you should enter your computer's ip address into that box. Put a checkmark in the Enabled checkbox.

    When you're finished, click Save Settings near the bottom of the screen to save your changes.

    It should look like this:

    To test if your port is open you can use PFPortCheck. It's free to download and very easy to use.

    And that's it! You're done!

    For your second problem:

    Your sites don't open when you use utorrent because it seems utorrent it's using your entire bandwidth and there is not any bandwidth left for your browser. To solve this you must set an upload/download limit for utorrent so you can still have enough bandwidth for browsing.

    Take care

  • RELEVANCY SCORE 2.88

    DB:2.88:[Solved] Problems Downloading With Transmission mf



    Hi guys,I just installed Transmission (cli and gtk). I followed the guide posted in ArchWiki for systemd (as I use it). Everything perfectly without any problems. Opening transmission-gtk, and adding a torrent (with many seed, already tested), the status of the torrent remains in inactive. The port that is used is open in my router. I try to connect to the web interface with Chrome, and I do not see the previous torrent inserted in transmission-gtk. I add one and magically starts. Re try the gtk one, but nothing ... Obviously I have write permissions in all folders that I need, including the one in which I should download.I do not know what to do O_O. Help me, I will not use any other torrent client!Thanks!

    Last edited by crixus-ita (2012-10-01 06:59:31)

    DB:2.88:[Solved] Problems Downloading With Transmission mf


    Solved... This is what I did, but im not sure why now it works:1. Uninstalled transmission-cli2. Deleted /etc/conf.d/transmissiond (I use systemd, so this step its not relevant (if Im not wrong).

  • RELEVANCY SCORE 2.88

    DB:2.88:Most Prefered Torrent Client For Mac cf


    Hi All,
    Which is the most preferred torrent client for Leopard ; the one which eats less amount of RAM and puts less load on CPU ? .
    I Have been using bittorrent for OSX for last couple of days , but not able to get a impressive download speed ( which was pretty fine while working with PC).

    I'm using wireless connection with Netgear WPN824 RangeMAx router . Should i do any special configuration for increasing download speed ?.

    Thanks,
    Nelson

    DB:2.88:Most Prefered Torrent Client For Mac cf

    I'm using 1.11, it's fine, never heard anyone suggest using 0.82.

  • RELEVANCY SCORE 2.88

    DB:2.88:How To Install Torrent Client Oel 6 77


    Hi ,
    I need to install GUI torrent client on OEL 6. I do not see any torrent client support for OEL6

    Thanks
    Ajay

    DB:2.88:How To Install Torrent Client Oel 6 77

    Are you using the right Linux distribution for your tasks? Personally I would not install a torrent client on a server platform. Perhaps http://www.transmissionbt.com/download/ will have an answer for you. You might have success with the CentOS or Fedora distributions, which use the same Red Hat package manager like Oracle Linux. Or try to build the source code.

  • RELEVANCY SCORE 2.85

    DB:2.85:Torrent Clients Help. fj


    I need a good torrent client.

    uTorrent never connects to half the amount of seeds in the swarm (I got 14 out of 200 in a torrent i'm trying to download now)

    BitComet comes with a gimpy program called FlashGot, Azureus is abit, poo.

    Forgot to put my question xD

    So, anyone got a way to get me connected to alot of seeds in uTorrent or a better client?

    Thanks.

    DB:2.85:Torrent Clients Help. fj

    I use BitLord, very easy to use and I haven't had any problems with it yet. Well a few download speed problems but that was sorted by opening some ports on my router.

    Same here!

  • RELEVANCY SCORE 2.84

    DB:2.84:Need A Torrent Downloader App. zs


    No torrent app is working after the new update to 10.3.1. Is there any working torrent app.

  • RELEVANCY SCORE 2.84

    DB:2.84:No Sound When Playing Movie With Bit Torrent 9s


    Original title - Sound record play
    i am trying to play a movie torrent download with Bit Torrent 7.6 and am getting no sound. what gives?

    DB:2.84:No Sound When Playing Movie With Bit Torrent 9s

    Hi,

    Do you have any issues playing movies in Windows media player? Were you able to play the movies before? What is the format of movie? Which version of Windows is installed on the computer?
    I would suggest you to run this troubleshooter and check if it helps:
    http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-sound-problems
    Hope it helps.

  • RELEVANCY SCORE 2.80

    DB:2.80:Befsr41v4.1 Firewalled Using P2p ad


    Windows XPAzureus torrent clientBEFSR41 V4.1Firmware 1.04.09I have port forwarded and triggered the appropriate portsI have reduced the number of connections to 20 on the Torrent clientMy MTU is set to 1300I have my IP obtained automaticallyMy Torrent client tells me that I am firewalled. I can download, but it is super slow. My upload speeds are fine. I have tried so many different combinations of settings to get this to work. I am so tired of messing with this router...please help.

    DB:2.80:Befsr41v4.1 Firewalled Using P2p ad

    4 days since my first post. i have done everything that i can to get my router to work with P2P software. i have trolled these forums countless times looking for answers that dont seem to help. i dont like the idea of having to disconnect my router just to get my internet to work properly.

    there has to be someone who managed to get this to work. can someone help me?

  • RELEVANCY SCORE 2.80

    DB:2.80:Torrent Client zz



    Is their anyone out their? That would like to assist me in creating a torrent client for blackberry. It must use bis push

    If youre interested kindly reply

    DB:2.80:Torrent Client zz

    ah, ok, best of luck. maybe you should make that clearer in the first post the next time.i am an employed developer and not available for freelance projects. maybe you can find developers on some of the more specialized pages, this forum is more for getting aid on code issues.



    ----------------------------------------------------------feel free to press the like button on the right side to thank the user that helped you.please mark posts as solved if you found a solution.@SimonHain on twitter

  • RELEVANCY SCORE 2.79

    DB:2.79:Transmission-Gtk Fails To Open New Torrents Properly j3



    Using transmission-gtk and transmission-cli on both 2.22-1 and 2.22-3 I receive a Transmission is already running error when trying to add a new torrent when the client is already running. The default application is set to use transmission-gtk and it happens with every new torrent that I add. Reverting back to 2.21-3 resolves this issue and new torrents open properly. Any ideas, possible bug?

  • RELEVANCY SCORE 2.78

    DB:2.78:Vuze Mobile Torrent Client sz



    Hi Guys.......

    Please help i,ev downloaded the app but i need Ip Settings and port number........PLEASE HELP

    DB:2.78:Vuze Mobile Torrent Client sz


    Hi Guys.......

    Please help i,ev downloaded the app but i need Ip Settings and port number........PLEASE HELP

  • RELEVANCY SCORE 2.78

    DB:2.78:Dose Anyone Know Method, For Traking Torrent Client Via Sce 2010 c1


    hi all
    Dose anyone know method, for traking torrent client via SCE 2010 ?

    Thanks regards
    Buddhika

    DB:2.78:Dose Anyone Know Method, For Traking Torrent Client Via Sce 2010 c1

    Hi Buddhika,
    As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as Answered as the previous steps should be helpful for many similar scenarios.
    In addition, wed love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
    Thanks,Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.77

    DB:2.77:Having Connection Issues With Wireless Usb Adapter z1



    During the day when Im just surfing the web or watching shows on hulu.com or using NHL game center live my adapter doesnt have any problems staying connected. But at night when I let my torrent client run my, adapter will disconnect and I will have to re-connect to the router manually to fix it.

    Is this a problem with my adapter or the torrent client settings? Would a different adapter, either usb or pci-express, fix this problem?

    Let me know if you need any more info.

    Thanks for any help.

    DB:2.77:Having Connection Issues With Wireless Usb Adapter z1


    During the day when Im just surfing the web or watching shows on hulu.com or using NHL game center live my adapter doesnt have any problems staying connected. But at night when I let my torrent client run my, adapter will disconnect and I will have to re-connect to the router manually to fix it.

    Is this a problem with my adapter or the torrent client settings? Would a different adapter, either usb or pci-express, fix this problem?

    Let me know if you need any more info.

    Thanks for any help.

  • RELEVANCY SCORE 2.72

    DB:2.72:Will My Cloud Ever Get A Native Torrent Client? 9d



    Nothing much to add as the title is more than enough. Just want to know if My Cloud will get nattive torrent client similar to My Cloud EX. That will make this a perfect system to use.

    DB:2.72:Will My Cloud Ever Get A Native Torrent Client? 9d


    I did that ssh once and broke my system and with FW 4 having problems with that method i will wait for WD to do some thing

  • RELEVANCY SCORE 2.71

    DB:2.71:Need Help With Media Player And Torrents 3d


    When I try to download a torrent my client will open, but when I click on the client to open the folder destination dialogue box, my windows media player opens instead and attempts to play the torrent before download even begins.

    DB:2.71:Need Help With Media Player And Torrents 3d

    Try right-clicking the file, choosing open with and choose default program and find the torrent program that should be used to open the file. It sounds like it's just trying to read the file with the wrong program (Media Player in this case).

  • RELEVANCY SCORE 2.71

    DB:2.71:Torrenting px



    Hello, I am wanting to use a torrent client but the bittorrent package in the Arch repos has no gui. What is a good torrent application with a gui?

    DB:2.71:Torrenting px


    Transmission for something simple and easy. aria2, or rTorrent for something even simpler, more efficient and likely faster.

  • RELEVANCY SCORE 2.71

    DB:2.71:Transmission Problem sd



    The transmission torrent client is showing that torrent X is loading with 70KB/s, but the size of downloaded file is the same all the time. when i pause the torrent and start it again it loads about 5MB and stops again. System monitor in gnome and ifconfig show that I am receiving data but it looks like transmission discards that data. Even if it discards that data the details menu for torrent X shows there has been no or few KB of failed download. I tried different torrents from different trackers and different access points but the problem is still there. Can anyone help me?I am using latest versions of transmission and iwl3945 for my wireless card.

    DB:2.71:Transmission Problem sd


    The transmission torrent client is showing that torrent X is loading with 70KB/s, but the size of downloaded file is the same all the time. when i pause the torrent and start it again it loads about 5MB and stops again. System monitor in gnome and ifconfig show that I am receiving data but it looks like transmission discards that data. Even if it discards that data the details menu for torrent X shows there has been no or few KB of failed download. I tried different torrents from different trackers and different access points but the problem is still there. Can anyone help me?I am using latest versions of transmission and iwl3945 for my wireless card.

  • RELEVANCY SCORE 2.70

    DB:2.70:Client Script Onsubmit() Problems 8f



    Hey everyone, having a problem with a script. On our change form, we have a tester field and an assigned to field. We do not want our tester and our developer to be the same person. I set up a client script that checks this on submission. When the people are the same, the script is working, but when they arent the same, it still will not let me submit and will throw the alert I have set up. Here is the script.

    function onSubmit()
    {
    var tester = g_form.getValue('u_tester'); //retrieves tester value from change form
    var assign = g_form.getValue('assigned_to'); //retrieves assigned to value from change form

    if (tester = assign) //compares the two fields, if tester and assigned to are the same, form is not submitted
    {
    alert ('The Developer and Tester cannot be the same. Please update and re-submit');
    return false;
    }

    else
    {
    return true;
    }
    }

    Any input is appreciated. Thanks.

    DB:2.70:Client Script Onsubmit() Problems 8f


    Working with sys_ids can be tricky. You could modify the client script like so:

    var assign = g_form.getValue('assigned_to').toString();
    var tester = g_form.getValue('u_tester').toString();

  • RELEVANCY SCORE 2.69

    DB:2.69:Bit Torrent Firewalled - What Needs To Be Changed To Fix af


    Hello,I'm currently using Azureus 3.0.5.0 as my Bit Torrent Client.I had Uverse installed today along with Internet. Now my Bit Torrent Client has a RED light next to FIREWALLED and the torrent site I'm using says I'm not connectable.Can someone please assist me in fixing this issue?

    Thanks!

    DB:2.69:Bit Torrent Firewalled - What Needs To Be Changed To Fix af

    Exactly. Just because one tracker site/search engine got shutdown or closed their doors doesn't mean BT as a whole is now dead. There are other tracker sites that I just now checked that are still open. Even Blizzard uses BT to distribute data to their games or information (such as videos) about their games. BT is often used to distribute Linux distributions as well. Red Hat's Fedora is one example.

    Message Edited by Koolkid1935 on 04-19-2008 04:41 PM

  • RELEVANCY SCORE 2.69

    DB:2.69:Upnp With Two Rounters + Torrent 9p


    I've just realized what may be causing some performance issues with BitTorrent downloads. The downloads appear to work fine but it appears to hog the network for other users no matter how far slow I throttle Torrent down. I have a modem/router followed by another router (FVG318). Both have UPnP enabled. Is it possible having both enabled confuses things? I think I will disable both and see the difference next time I need to use Torrent downloads.

    DB:2.69:Upnp With Two Rounters + Torrent 9p

    if you can pass public IP to 2nd router behind the router will be a good over using double NAT

  • RELEVANCY SCORE 2.69

    DB:2.69:How To Block Torrent / Bit Torrent? Fvs318 8c


    I'm the head of a household in need of help with ports.

    I need to block what I believe to be bit torrent, but blocking the ports 6881-6889 does not seem to help. I've tried setting the device to block according to schedule, and also tried block always.

    I have good reasons for blocking it and don't want to get into debates about that other than to say it's against household policy.

    So, according to the sniffer (network associates sniffer pro 3.0), I can take a close look by filtering for only the WAN IP address of the FVS318, and for whatever reason, if I block those ports (tried globally all users, or just to the MAC of that PC) the activitiy does not stop.

    I'm looking at it on the sniffer and it keeps going. Hundreds of IP addresses all talking to that one PC (throught he FVS318 ).

    It will stop if I go in and stop the torrent client on that PC so I'm confident it's not malware or a worm. You can see how I am sick of doing this, asking it to be done, and just plain inconvenienced by it. Sniffer pro does not show me the port for each kind of traffic so I can't figure out what's going on there (or I might not know how to set that up).

    I'm no network guru, mainly a hardware hack, so please excuse my ignunce here.. Can anyone say what I am doing wrong? Are other ports used by these kinds of services?

    Thanks in avance,

  • RELEVANCY SCORE 2.68

    DB:2.68:Ff4 Wont Download Torrent File Correctly. p3



    FF4 downloads the torrent file as a 0 bytes file, making it unable to be opened with my client program. It happens just with torrent files and in ff4 and the source isn't broken. It loads it correct after 10-20 attempts of downloading.

    DB:2.68:Ff4 Wont Download Torrent File Correctly. p3


    FF4 downloads the torrent file as a 0 bytes file, making it unable to be opened with my client program. It happens just with torrent files and in ff4 and the source isn't broken. It loads it correct after 10-20 attempts of downloading.

  • RELEVANCY SCORE 2.68

    DB:2.68:Qos Do Anything For Torrent? zz


    I just got a WNDR3700 and having some trouble with QoS, doesn't seem to be working the way I hoped.

    I have a 30/5 megabit cable connection. I throttle my torrent uploads to 200 kilobytes per second while I'm trying to do other things (otherwise my uplink gets saturated easily).

    Torrent is working great. But too great. I want to be able to surf the web, maybe play my online game while torrent is doing it's thing in the background. I could throttle down the torrent settings, but hoping QoS would just prioritize things better so I don't need to.

    I setup a QoS rule for torrent and assigned it Low.

    I setup a QoS rules for web (tcp/udp 80) and my online game and assigned them High and Highest.

    For good measure I manually rebooted the router after creating these rules.

    Problem is web surfing is a crawl while while torrent is running. Just to be sure my uplink was being unusually slow, I throttled the torrent uploads back to 50kB. But still lagging badly. Closing the torrent client naturally returns web browsing to normal.

    Shouldn't QoS be helping more. Any tips on how I should setup my rules? Thanks.

    DB:2.68:Qos Do Anything For Torrent? zz

    The fewer connections you allow the better. As I mentioned before, more connections increases CPU utilization which is also a big factor with torrents.

  • RELEVANCY SCORE 2.68

    DB:2.68:Blocking Torrent On Asa 89



    Hi,

    I have an ASA5520 with 8.0 software. Is there anyway to block torrents?

    thanx,

    Gregor

  • RELEVANCY SCORE 2.68

    DB:2.68:Torrent Client | Asha 501 7s



    I am going to install a wifi router quite soon.

    Hi, Is there any torrent client available for Nokia Asha 501 ?

    If yes how do I install it ? Since I never used wifi I didnt install any app other than Opera browser.

    DB:2.68:Torrent Client | Asha 501 7s

    smartasha wrote:

    I just installed MobTorrent but when I try to select the download folder its says "Something went wrong with running this app".

    I have tried selecting both the internal memory and momory card but same thing.

    The reason behind this is that the current build is not compatible with full touch phones particularly Asha devices and there is no sign that a compatible version is coming soon.




    _____________________________________________

  • RELEVANCY SCORE 2.68

    DB:2.68:Need Help With Python Script For Deluge ma



    I am using Deluge 1.3.2 with web server, and all works fine, I use this script in the Deluge settings to execute upon torrent completion:
    #!/bin/bash
    torrentid=$1
    torrentname=$2
    torrentpath=$3
    torrenttimedelta=`/usr/bin/python2 /home/bobby/scripts/deluge/torrentTimeDelta.py $1`

    subject=Started download new torrent!
    message=$torrentname to $torrentpath

    echo -e `date`::Finished downloading torrent:$2 in: $3 with id:$torrentid ~/logs/scripts.log
    echo -e `sendEmail -t my@email.com -f my@email.com -u deluge server notification: torrent $torrentname is complete! -m $torrentname has completed downloading at: $torrentpath and took $torrenttimedelta to complete :) -xu my@email.com -xp password -v -o tls=yes -s email.com` ~/logs/scripts.log
    echo ---------------------------------------- ~/logs/scripts.log

    DB:2.68:Need Help With Python Script For Deluge ma


    [edit] Sorry, I dont use deluge and I messed up my test script. If the script is executable try `/home/bobby/scripts/deluge/torrentTimeDelta.py $1`Are there any other errors? or try running bash with debug output to see if it will tell you something else

    The problem you are having is bash doesnt recognize variables inside the tick marks.

    Hope that helps

    Last edited by rickeyski (2011-07-05 19:27:36)

  • RELEVANCY SCORE 2.68

    DB:2.68:Torrent Genie 3p


    Can a torrent genie client work with time capsule or AirPort Extreme ?Thanks

    DB:2.68:Torrent Genie 3p

    There is no client you can add into the TC.. a computer has to be turned on the whole time. Apple do not allow additions to the TC firmware unlike some of the better real NAS.

  • RELEVANCY SCORE 2.67

    DB:2.67:Is It Possible To Create A New Torrent To Share From The Transmission Client? sj



    I have various files on the drive that I'd like to be able to share via. torrent. Is it possible to create new torrent files using the transmission client?

    DB:2.67:Is It Possible To Create A New Torrent To Share From The Transmission Client? sj


    Hello,

    I recommend you post your question in the Transmission forum.

    https://forum.transmissionbt.com/

    You can also wait to see if any other user has experience on this and can share some thoughts.




    Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else.

  • RELEVANCY SCORE 2.66

    DB:2.66:Blue Screen Of Death Issue While Using Torrent Client cm


    Hello Sir,

    DB:2.66:Blue Screen Of Death Issue While Using Torrent Client cm

    It appears that the wsnf.sys may be the issue:

    ffffd000`22d7c5f0 fffff800`01dd37dcUnable to load image \SystemRoot\system32\DRIVERS\wsnf.sys, Win32 error 0n2
    *** WARNING: Unable to verify timestamp for wsnf.sys
    *** ERROR: Module load completed but symbols could not be loaded for wsnf.sys
    wsnf+0xb7dc

    The
    wsnf.sys is a QuickHeal network filter driver and has been known to cause BSODs such as reported

    here.

    I would suggest to uninstall QuickHeal and see if the error resolves.

    Consider alternative security software such as Windows 8.1 built-in antivirus (Windows Defender) and firewall.

    Also, since QuickHeal may not have been working properly I might suggest to run the following two applications just to see if they pick anything up:

    TDSSKiller:
    http://support.kaspersky.com/faq/?qid=208283363

    Malwarebytes Antimalware (free version - decline the invitation to install the full version trial) - do a "Quick Scan":
    http://www.malwarebytes.org/products/malwarebytes_free

  • RELEVANCY SCORE 2.66

    DB:2.66:Blue Screen Issue Everytime I Use Torrent Client Please Help 1z


    Hi...

    DB:2.66:Blue Screen Issue Everytime I Use Torrent Client Please Help 1z

    Update : I was surfing for some fixes. i Came across this link (http://www.troublefixers.com/utorrent-crashes-windows-7-with-blue-screen-of-death/)

  • RELEVANCY SCORE 2.65

    DB:2.65:Wrt300n And Torrent Problem xa


    Hi, I always have the same problem: when I use my torrent client I lost connection with router and internet too. I try all offers from support but nothings changes. What I need to do? It is possible that this product work fine? Thanks.

    DB:2.65:Wrt300n And Torrent Problem xa

    hey im having a similar problem but except wen i conected my router for the 1st time all my torrent programs wouldnt work example azeurus wen i click on it nothing happens no screen or nothing lime wire jus says some type of firewall is blocking it...is their a way to fix this? i read something bout ports but dont undersand none of that stuff make it simple and thnx

  • RELEVANCY SCORE 2.65

    DB:2.65:Re: Urgent!!!! Update With Order By Clause pm


    Ya........but the client is not ready for that upgradation.
    Newayz....I have reduced your query to :-
    UPDATE tester cor
    SET cor.pos_trans_no = 'KAPIL',cor.pos_sc_code = 'KAPIL'
    WHERE EXISTS (
    SELECT NULL
    FROM (
    SELECT rowid rwd,pos_trans_no
    FROM tester
    WHERE ROWNUM 10
    ORDER BY pos_arrive_date
    ) cor2
    WHERE cor.rowid = cor2.rwd);

    DB:2.65:Re: Urgent!!!! Update With Order By Clause pm

    Well, The orders that came in first need to be processed first and that is why for one day we are going to process 'nrowcount' of records which were entered into the system first....ofcourse there will be a flag to distinguish which have been processed and which have been not.
    So WHERE clause should also contain one more condition :-
    WHERE pos_trans_no != 'KAPIL'

  • RELEVANCY SCORE 2.65

    DB:2.65:Loss Of Connexion On Torrent App Launch dk


    Hello !

    I am experiencing a systematic loss of internet connexion each time I launch my Torrent client. Other computers on the network are not affected.

    Most of the time, my torrent resumes download with no problem, but no other internet service is working on the affected computer, before it comes back to normal after an average 15 mn.

    This wouldn't be so bad if I didn't need torrents, but my favorite online news show delivers recording of past shows in torrent format ! So each day when I want to see their show, I have to lose internet for at least 15 mn...

    A few info from the router configuration :

    Keyword blocking : never

    Block services : never

    Security service : Trend Micro Security Services Enabled (tried to disable it, didn't change anything)

    Parental Controls : Always (on this panel, all options are grayed out, I can't change anything oO )

    Any ideas ?

    Thanks in advance !

    DB:2.65:Loss Of Connexion On Torrent App Launch dk

    @ jmizoguchi I am not sure what you are trying to say exactly : as I said, no matter how much bandwidth I allow to the torrents : 0 Ko/sec or 100 or 500, the problem simply occurs as soon as I launch the app and a torrent tries to connect - SO YES EVEN UNDER 100 !

  • RELEVANCY SCORE 2.64

    DB:2.64:Need Help With Torrent Type Programs Im Sure My Router Is Blocking It Somehow j3


    hey im having problem wen i conected my router for the 1st time all my torrent programs wouldnt work example azeurus wen i click on it nothing happens no screen or nothing lime wire jus says some type of firewall is blocking it...is their a way to fix this? i read something bout ports but dont undersand none of that stuff make it simple and thnx

    DB:2.64:Need Help With Torrent Type Programs Im Sure My Router Is Blocking It Somehow j3

    Trigger ports 6881-6999 for Torrent on your router it will definately work!!!

  • RELEVANCY SCORE 2.64

    DB:2.64:Wd Mycloud Torrent Download, Torrent File Added With Ios 9a



    Dear All,

    I would like to use, setup, etc. the NAS itself, and add, delete, setup torrent files in 100% from my iPad 4. Is it possible? Or I must need a PC to setup these things?

    Thank you!

    DB:2.64:Wd Mycloud Torrent Download, Torrent File Added With Ios 9a

    Pomk83 wrote:
    But if I think right, the Transmission should be installed and used through a PC, because I want to control my NAS 100% from my iPad.

    No you can access it from your ipad, by simply opening a web browser and go the transmission web server

  • RELEVANCY SCORE 2.64

    DB:2.64:I Want The Open With Query When I Click A Torrent Link So That I Can Assign A Bittorrent Client. pc



    Right now, when I click a torrent link in a web page, Firefox opens the download window and saves the torrent file. I must now click the filename in the download window in order to open it with a bit torrent client. Instead, I want the saved file to be opened automatically, i.e. saving and opening should happen one after the other with only one click. I think this will happen if the option box asking whether to save or open the file appears on clicking. This box is currently not appearing, i.e. the "save" option is taken for granted. I want Firefox to ask me whether I want to save or open the file and in the latter case, with which application I want to open the file after it is saved.

    DB:2.64:I Want The Open With Query When I Click A Torrent Link So That I Can Assign A Bittorrent Client. pc


    Right now, when I click a torrent link in a web page, Firefox opens the download window and saves the torrent file. I must now click the filename in the download window in order to open it with a bit torrent client. Instead, I want the saved file to be opened automatically, i.e. saving and opening should happen one after the other with only one click. I think this will happen if the option box asking whether to save or open the file appears on clicking. This box is currently not appearing, i.e. the "save" option is taken for granted. I want Firefox to ask me whether I want to save or open the file and in the latter case, with which application I want to open the file after it is saved.

  • RELEVANCY SCORE 2.64

    DB:2.64:W120n Torrent Problem d9



    Hello.My name is Mihai.I have a w120n router.and i have problem with torrents.my client (utorrent) does not upload anything,download works verry well.i have a 24 mb download band.and 2 mb upload.but the upload works only without the router.here i have added a capture of the setting for nat.

    http://img535.imageshack.us/img535/5091/router.png

    DB:2.64:W120n Torrent Problem d9

    It's still cut off but at least it shows the port 23278 is open. Check everything once more following this.

    If everything is O.K. make sure you have the latest firmware on your router. If you do, well, it's either your ISP blocking torrent traffic or a firmware bug.

    You could try a internet port scanner and test if TCP port 23278 is open from the internet.

  • RELEVANCY SCORE 2.63

    DB:2.63:Torrent fa


    I know this is not the torrent help forum, but I don't know where else to ask so I thought I would see if anyone here knows. I am using tomato torrent, which seems to work pretty well. I am trying to download a single file, but I can't find this file by itself. It is only packaged with a bunch of other files that I don't need. Now on my PC, I remember I was able to check only the files that I want to download within a torrent. I can't seem to find that option in tomato. Does anyone have any advice? Thanks.

    DB:2.63:Torrent fa

    There may be a difference between the two versions for PC and MAC. A good torrent downloader that you can use is Azureus which can give you the ability to just download a single file within a torrent.

  • RELEVANCY SCORE 2.63

    DB:2.63:Is Transmission Good For Mac d7


    I want to know that torrent client called transmission is good for my macbook air(which is running on OSX MAVERICKS).I am bit afraid to use a torrent client for my macbook airSo is it ok to download books via a torrent cllient?Please help me??????? Thank you very much..........

    DB:2.63:Is Transmission Good For Mac d7

    Thank you very much stedman 1...........

  • RELEVANCY SCORE 2.63

    DB:2.63:[Network] Torrentflux Php Based Torrent Client z3



    Here is a PKGBUILD for torrent flux, unfortunately a fair bit of it is hard coded. Ill clean it up soon with some bash scripting.

    The PKGBUILD is hard coded to lighttpd atm, but it can run with apache (which its designed for, but i dont want to have its footprint on my server) with the addition of a few if statements which i dont have time to add atm.. i will later

    I had to use cactus php-cgi packagehttp://wiki.archlinux.org/index.php/Lig … celerationhttp://e.solarblue.net/index.php/arch-repo/

    you dont need to worry about the SSL bits.. just follow:

    4 Lighttpd Installation6 FastCGI and PHP with eAcceleration

    DB:2.63:[Network] Torrentflux Php Based Torrent Client z3


    Here is a PKGBUILD for torrent flux, unfortunately a fair bit of it is hard coded. Ill clean it up soon with some bash scripting.

    The PKGBUILD is hard coded to lighttpd atm, but it can run with apache (which its designed for, but i dont want to have its footprint on my server) with the addition of a few if statements which i dont have time to add atm.. i will later

    I had to use cactus php-cgi packagehttp://wiki.archlinux.org/index.php/Lig … celerationhttp://e.solarblue.net/index.php/arch-repo/

    you dont need to worry about the SSL bits.. just follow:

    4 Lighttpd Installation6 FastCGI and PHP with eAcceleration

  • RELEVANCY SCORE 2.63

    DB:2.63:Torrent Server With Web Gui zm



    i am currently using deluge on my workstation for torrents, i keep leaving it on to finish downloads, now this seems crazy when i already have a server on 24/7.

    Does anyone know of a torrent client for my server (has to be x-less) that has a webgui i can access on my workstation. For instance i know rtorrent and deluge have a webgui, but they need x installed which i really dont wan to do.

    A solution would be nice not only could i get my download finished, i can do my bit when it comes to seeding more sucessfully.

    Thanks

    Gaz

    Last edited by gazj (2007-12-13 15:33:22)

    DB:2.63:Torrent Server With Web Gui zm


    actually i might switch to rtorrent. i just read about some of the features it has. the 1 thing i really want is directory watching, which transmission seems to lack.

  • RELEVANCY SCORE 2.63

    DB:2.63:Ea6400 Torrent Client? kf



    Hello,

    I recently bought an EA6400 Router (pretty happy about its performance with all the devices in my house).

    ...however, i would like to be able to download torrent files on the hard drive connected to the router, and i'm not sure if i must use the torrent client on my computer (meaning i can't turn off the computer), or there is an application available which can connect to the router and download torrent files directly to its hard drive.

    ...if anyone has any experience with such configuration, feedback is highly appreciated

    DB:2.63:Ea6400 Torrent Client? kf

    I agree with FurryNutz. You need to use the torrent client on your PC and route the download folder to the mapped drive that is connected to the router.

  • RELEVANCY SCORE 2.63

    DB:2.63:[Solved]Torrent Client da



    Im currently looking for a torrent client that has a nice and sleek user interface. Something as close as utorret as posible. This is for a friend taht wants to adopt linux but needs a good torrent client, with features similar to those in utorrent. He has tried transmission already but he finds the UI lacking some vital information.

    Any help on this matter would be greatfull and help a get a new user into linux.

    Last edited by masterkoppa (2009-09-21 19:52:35)

    DB:2.63:[Solved]Torrent Client da

    ugkbunb wrote:sand_man wrote:
    Once you try rtorrent, youll never go back! I was skeptical at first but that was before I tried it.

  • RELEVANCY SCORE 2.63

    DB:2.63:Usenet Client mp


    Ok maybe i've missed it. Been reading a bit and see its now possible to have torrent client running with a Stora drive. Is it possible to do the same with a Usenet client? would love to have the option of downloading while my PC is off.

  • RELEVANCY SCORE 2.63

    DB:2.63:Vista And Bit-Torrent? fx


    I'm having serious issues with my new I6400 and Bit-Torrent.  Whenever I have a bit torrent client open, it is only a matter of time until my internet connection drops and i have limited connectivity.  I've seen a few posts on other forums about this, none of which have come up with a suitable answer, but I'm wondering if any of you guys know anything more.

  • RELEVANCY SCORE 2.62

    DB:2.62:Connection Lost After Finishing A Torrent Download 8m



    Hi!

    Everytime i finish downloading a torrent i get cut off from the internet. Every conncetion that ran while the torrent was downloading is still up, but i cant open any new ones. What this means in practice, is that after the torrent finishes I cannot open a webpage or ping, etc. I do not get a error message, just a blank page with my browser trying to load the page. This takes about 5-10 minutes, than its back up normal again. My router is fine since I can still use the internet with any other device while having this error on my PC. I only have this when using Arch.

    How can I fix this? Im now trying to lower the maximum connections in my torrent client to see how that affects my problem. Any help is appreciated. Thank you.

    DB:2.62:Connection Lost After Finishing A Torrent Download 8m


    Under no ports left open I mean that they no longer appear in the list of netstat.

  • RELEVANCY SCORE 2.62

    DB:2.62:Wrtp54g And Port Forwarding dz


    I recently purchased a Linksys WRTP54G router/Vonage phone combo. My ISP is Comcast. I have read several post that pertained to model WRTP54G but still can't seem to find an answer to what I need. Since installing this router I am no longer able to connect to my bit torrent client which is Utorrent. I followed the steps on the Port Forwarding site on how to open a port for the WRTP54G but it still will not work. I'm not sure how to obtain my static ip address and would appreciate any help in doing so. My computers operating system is Vista and I am using a Motorola SB5101 with Comcast to access the internet. Before I started using the Linksys router I was using the SB5101 and a Motorola unit provided by Vonage and had no trouble with my bit torrent client. On the Utorrent site they say there is a severe issue with forwarding a port using any Linksys wireless routers and suggested a fix for the problem but said to do so at your own risk. Well forget that. Can any one help me determine my static IP address and get me connected again to my bit torrent client? Any help would be greatly appreciated.

    DB:2.62:Wrtp54g And Port Forwarding dz

    it does not necessarily mean that if dhcp is not enabledthen your pc gets an automatic static ip. you have to assign it yourself. but before you proceed to that, what i know is that you will only do a static ip if you will be the game server. if you will just access it, then you will only do port triggerring and not forwarding. or it can be that you had a port triggered thats why you cannot do port forward.

  • RELEVANCY SCORE 2.62

    DB:2.62:Refusing To Work... 81



    Linux Yellowdog 6 Offline with torrent

    DB:2.62:Refusing To Work... 81


    I dont know never had a problem with the tracker before runs great usually i find everything but yellowdog 6 never seems to start.

  • RELEVANCY SCORE 2.62

    DB:2.62:Torrent On Symbian Belle. 9m


    How to download any torrent on Symbian Belle? I got SymTorrent but when I add torrent file the application is crash. Help me I need torrent on my phone. Nokia 500

    DB:2.62:Torrent On Symbian Belle. 9m

    I had no idea this app is available for Symbian. Thanks for the link Apergerguy.



    ________________________________________________________________

    -------------------If this post helped you, click on accept as solution.------------------
    -----------------------------Appreciate by clicking on white star.----------------------------

  • RELEVANCY SCORE 2.62

    DB:2.62:Torrent Rss Download On Fw 4.X ? 8m



    Does anyone know of any torrent downloader from a torrent RSS feed? i would like to upgrade m wd cloud to FW 4.x but really need some rss torrent downloade.

    im currently running "Flexget" on wd cloud on FW 3.x

    thanks

    DB:2.62:Torrent Rss Download On Fw 4.X ? 8m


    Hello,

    I have not tried this since it is not supported. Lets see if another user has tried it and can share some experience with us.




    Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else.

  • RELEVANCY SCORE 2.61

    DB:2.61:Torrent Files fj


    What do I need to open torrent files with?

    DB:2.61:Torrent Files fj

    Jumping to conclusions maybe? The only torrents I have downloaded are Linux Distro .iso files.

  • RELEVANCY SCORE 2.61

    DB:2.61:Torrent Problems j9


    Hello,

    After reading all the torrent posts in this forum and trying to apply their recommendations it didn't work with me.

    All my cables are fine, I tried port forwarding and adjusting same ports on torrent and router but it didn't help much. I tried to DMZ and turn off the firewall and it also didn't work.

    I really need a suggestion here, help is much appreciated.

    DB:2.61:Torrent Problems j9

    I have a WRT54GL router - WUSB54GR usb network adapter, and if I use torrent (down/uploadin) and while I started a webbrowser the router "disconnected, the net connection unconneted, I can't connect with the router, but the monitor is write the "adapter-router connection ok, but not found the internet".
    If I torrenting only, than after approx. half hour is to to unconnection, same situation, the router is unobtainable.

    Why do it this? How can I solve it?

    Thanks the help!

  • RELEVANCY SCORE 2.61

    DB:2.61:Wrt54gs V6.0 Slow With Torrents Running j8


    Hello,Current Config: WRT54GS - V6.0 - Firmware Version:v1.52.0(just updated)WAN info:All Manually assigned.LAN - 1 static IP and 1 laptop on dhcpIssue:Normal surfing and downloading is perfect, no issues on a 6MB WAN link. The only issue is when I start up a uTorrent program, then all pings and internet access either drops or goes very slow.The load on the link is less then 1MB - so there is no issue with the torrent system hanging the link.I believe the router is not closing open connections, or just is not able to handle the Torrent traffic AT ALL.Troubleshooting done so far:== Upgraded to latest firmware (this HELPED, but did not solve issue - less ping drops with new firmware)== Tried torrents again WITHOUT ANY ROUTER, this worked pefect!!== Tried torrent on different port, same issue.== Tried torrent on both machines, no change (only I need to change the port rules on the router).I do not think this is port forwarding related as I've the correct ports assigned to the torrent machine.The issue only happens whilest any torrent program is open, it does not even need to be downloading or uploading!I see a lot of related discussions on this issue on many web sites, but no one has offered an official solution. This is what I'm now requesting.Router is less then 24hrs old, so I have the option to return it.Many Thanks,Joe LeavyDublin

    DB:2.61:Wrt54gs V6.0 Slow With Torrents Running j8

    Just use DDWRT firmware and all of your issues with the WRT54G and WRT54GS will disappear.

    My WRT54GS used to crash every 2 hours to 24 hours, having to Power cycle it every time. It will just loose connection to the internet and dropping Wireless connection. My WRTG4GS was upgraded to DDWRT third party firmware and has never dropped any connection since.

    Too Bad linksys does not have a proper testing procedure for their firmware

    http://www.dd-wrt.com/dd-wrtv2/index.php

  • RELEVANCY SCORE 2.60

    DB:2.60:Stora Torrent Automatically Load Torrent Files For Download p7


    Hi

    I have just starting using my Torrent service on my Netgear Stora. It works great but wanted to know if you can set the automatically load torrent files for download from watched directory.

    I found on the this setting on the Transmission web:

    watch-dir: String

    watch-dir-enabled:

    Can these be set on the Stora torrent client and if so how?

    Stefan

    DB:2.60:Stora Torrent Automatically Load Torrent Files For Download p7

    Hi,

    Looking around, it's something to do with adding two line to the 'settings.json' file in the transmission config files. It cannot be done via GUI in v1.92.

    I tried to amend the .json file but wouldn't let me write the new file to the stora. I don't know if a more up-to-date version of transmission would have this function.

  • RELEVANCY SCORE 2.60

    DB:2.60:How Do I Get Epiphany To Open .Torrent Files With Transmission? sp



    At the moment Epiphany (with Gecko backend) is only allowing me to download .torrent files instead of being able to open them in my torrent client (transmission), does anyone know what needs to be changed to fix this?

  • RELEVANCY SCORE 2.60

    DB:2.60:Avi Torrent, With No Sound...Quicktime Issue? sp


    I have a .avi file with no sound. I think it's a quicktime issue. What codec do I need to install?

    Vincenso

  • RELEVANCY SCORE 2.60

    DB:2.60:What Is A Torrent? I Had Bitlord On My Toolbar But Tried To Delete It. Do I Need It? js



    I am a new Firefox user and am trying to get familiar with it. I noticed my toolbars are set up as Yahoo, YTD and BitLord, which I just tried removing. What is a torrent and is it something I need to have as a toolbar?

    DB:2.60:What Is A Torrent? I Had Bitlord On My Toolbar But Tried To Delete It. Do I Need It? js

    Helpful Reply


    Here is a link to a description of BitTorrent: http://en.wikipedia.org/wiki/BitTorrent_%28protocol%29

    It is definitely not essential to the functioning of the browser, and if you don't think you need it, it is safe to remove. You can always add it back later if you want to.

  • RELEVANCY SCORE 2.60

    DB:2.60:[Solved]Torrent Clients Are Quiting Automatically pp



    I am using GNOME 3.2 on arch linux.Whenever i tried to download a torrent the torrent client first appear and then quit automatically.I have used two torrent clients

    Transmission:

    Whenever the licence accept or quit screen appears, I have clicked accept.But instead of starting torrent it quits automatically

    Deluge:

    In this case deluge is shown on upper panel while loading and then it quits automatically.

    For confirmation i have downloaded another .torrent file but it is still not working

    Last edited by Manuj19 (2011-10-18 12:23:56)

    DB:2.60:[Solved]Torrent Clients Are Quiting Automatically pp


    Thank you very much pygtk for deluge works for meand I will check transmission

  • RELEVANCY SCORE 2.60

    DB:2.60:Installed Transmission Torrent Client... Now Airport Extreme Freezes/Crash 1j


    I just downloaded Transmission today for the first time. I have owned an airport extreme 802.11n router with gigabit for the last few months. It as the latest firmware version 7.2.1. I use the router to create a wireless network for my Macbook, no external drives or printers attached. I am running OSX 10.4.11. Since the day I set up the router it has run with no problems. Until today...

    My router crashes/freezes now and I lose my internet connection. I have to hard reset the router to get my computer to find it again. This began after transmission entered the picture. Is there some settings that I need to change on the router to make transmission work with the airport extreme? I've searched the apple forums and seems this is a very common problem with torrent programs and airport extreme. Hope someone can help me out with a solution or I may have to give up on Transmission/torrent clients for the sake of maintaning my internet connection stable.

  • RELEVANCY SCORE 2.60

    DB:2.60:Is There A Torrent Client For N900 sx



    hi guys,i use torrents on my laptop an desktop an was wondering if i can get a torrent client for my trusty n900,thanks.

    DB:2.60:Is There A Torrent Client For N900 sx


    There's no real way of bricking it just by installing apps from the testing repositories. Don't ever be scared to try something out. The beauty of it is that if something conks out you can always reflash if necessary.

    If you want to make the most of anything, you have to be prepared to try new things, don't be scared to break something.Not physically! I've found that I always learn the most when fixing a mistake.

  • RELEVANCY SCORE 2.60

    DB:2.60:Edit The Trackers From A Torrent File Using Vim. fm



    Hi.

    I constantly need to edit torrent files to change their trackers. So I wrote a vim plugin to handle this.

    The plugin is at http://fma.if.usp.br/~kazuo/torrent.vba

    You need hunnyb (in aur) OR bittorent (the original one, is in extra/bittorent) and a vim compiled with python.

    To use simple install the vba and open a torrent file, in the buffer you see a list of trackers from the torrent file, edit it, one tracker per line with a leading space, and save it, its automatic regenerate the torrent file. (Dont touch the other lines in the buffer)

    This is the first version, please try it and report back.

    The buffer is somewhat more complicated than needed because I like to add other infos to be edited, so Im using ConfigParser.

    I hope its is useful to someone!

    EDIT:New version 0.5.5: Support for tiers. Now its do the correct with tiers, to separate a tier from other use a line containing a . (dot) with leading spaces, for example
    [torrent]
    trackers =
    http://tracker.publicbt.com:80/announce
    udp://tracker.publicbt.com:80/announce
    .
    http://tracker.thepiratebay.org/announce
    udp://tracker.thepiratebay.org:80/announce
    .
    http://tracker.openbittorrent.com/announce
    udp://tracker.openbittorrent.com:80/announce

    DB:2.60:Edit The Trackers From A Torrent File Using Vim. fm


    Hi.

    I constantly need to edit torrent files to change their trackers. So I wrote a vim plugin to handle this.

    The plugin is at http://fma.if.usp.br/~kazuo/torrent.vba

    You need hunnyb (in aur) OR bittorent (the original one, is in extra/bittorent) and a vim compiled with python.

    To use simple install the vba and open a torrent file, in the buffer you see a list of trackers from the torrent file, edit it, one tracker per line with a leading space, and save it, its automatic regenerate the torrent file. (Dont touch the other lines in the buffer)

    This is the first version, please try it and report back.

    The buffer is somewhat more complicated than needed because I like to add other infos to be edited, so Im using ConfigParser.

    I hope its is useful to someone!

    EDIT:New version 0.5.5: Support for tiers. Now its do the correct with tiers, to separate a tier from other use a line containing a . (dot) with leading spaces, for example
    [torrent]
    trackers =
    http://tracker.publicbt.com:80/announce
    udp://tracker.publicbt.com:80/announce
    .
    http://tracker.thepiratebay.org/announce
    udp://tracker.thepiratebay.org:80/announce
    .
    http://tracker.openbittorrent.com/announce
    udp://tracker.openbittorrent.com:80/announce

  • RELEVANCY SCORE 2.60

    DB:2.60:Problems Opening Ports For Torrent Downloads f8



    Is there a how to guide or anything out there on how to properly open and forward ports....for something like a Torrent client?

    I thought I was doing everything right, but I still can't get my client to connect to any trackers.

    This is what I've done so far:

    Added a new protocol for bit torrent with the following ports that my client uses:
    TCP Any - 6881-6891 UDP Any - 6881-6891

    Forwarded that protocol to the static IP of the machine running the client on the network.

    I thought that's everything it would take to make it work, but no luck. I did the same thing with ftp and http for a filer server I use and it all works great.

    Any tips?

    DB:2.60:Problems Opening Ports For Torrent Downloads f8

    Ok, I have to wonder if this router has a small NAT table...

    See as need be:

    http://www.verizonfioswiki.com/index.php/Using_You​r_Own_Router

    and or

    http://www.dslreports.com/faq/16077

    All DSLR (dslreports.com) FAQs » Verizon Online FiOS FAQ » Networking » What are the tradeoffs between the various router configurations




    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • RELEVANCY SCORE 2.60

    DB:2.60:Torrent Client Using Linksys Wrt610n Router Behind 3800hgv-B Gateway j1



    Hello all ... I joined as I spent a half a day trying to solve this problem and it has turned into a full day without success. I have a WRT610N router behind the 3800HGV-B Gateway so I can have a more optimal wireless setup and to keep my home network together on my WRT610N. I do not have a problem with the Router/Gateway configuration for most of my needs. My problem lies with setting up a Torrent Client and I have been unsuccessful with the correct configuration. I have searched the guides and have not found one that specifically fits my needs. Any suggestions for a site or forum for more information will be greatly appreciated. Cal

    DB:2.60:Torrent Client Using Linksys Wrt610n Router Behind 3800hgv-B Gateway j1


    WRT610N is a dual band wireless router.

    Connect the computer to the router with the Ethernet cable. Open the setup page of the router. Go to Wireless tab and set the configuration view to Manual.

    Change the wireless network name for 5 GHz wireless band so that both the wireless bands will have different SSID.

    Change the wireless channel to 11 for 2.4 GHz wireless band. Save the settings.

    Go to Advanced wireless settings. Change the Beacon Interval to 75, RTS and fragmentation threshold to 2306. Save the settings.

    Go to setup tab and change the MTU size to 1365. Save the settings.

    Go to Administration tab and uncheck the box 'Filter anonymous Internet request'. Save the settings.

    Power cycle the router and see if that makes any difference.

  • RELEVANCY SCORE 2.59

    DB:2.59:Oracle Client Is Really Required? a7


    Hi,

    Oracle server software is installed on machine with ORACLE:DBA user and group.

    for developer or tester does i need to install oracle client also on same machine,

    i am assuming no need to install client on same machine as oracle server is already there, please correct me if i am wrong and provide any doc if you have.

    machien: SunOS, and oracle 10.2.0.4

    Regards,

    Edited by: ma**** on Oct 11, 2010 2:53 AM

    DB:2.59:Oracle Client Is Really Required? a7

    Yes, you are right for practice perpose you doesn't need Client

  • RELEVANCY SCORE 2.59

    DB:2.59:Ktorrent Magnet Links 1f



    Greetings,

    I have an issue with KTorrent (KDE 4.9.2): it doesnt download magnet links anymore.I tested from my home and work networks, even though it works with other clients (eg Transmission).DHT is enabled.

    The download is accepted, and gets added to the list of Magnets.The status is Downloading, and the number of Peers is just zero.

    I cant really go to another client, I need my syndication plugin, my ktorrent widgets and such... so Id really like to fix it.Maybe someone has/had this problem as well ?

    EDIT: Regular torrent downloading works fine.

    Last edited by Plaristote (2012-10-15 10:24:50)

    DB:2.59:Ktorrent Magnet Links 1f


    Greetings,

    I have an issue with KTorrent (KDE 4.9.2): it doesnt download magnet links anymore.I tested from my home and work networks, even though it works with other clients (eg Transmission).DHT is enabled.

    The download is accepted, and gets added to the list of Magnets.The status is Downloading, and the number of Peers is just zero.

    I cant really go to another client, I need my syndication plugin, my ktorrent widgets and such... so Id really like to fix it.Maybe someone has/had this problem as well ?

    EDIT: Regular torrent downloading works fine.

    Last edited by Plaristote (2012-10-15 10:24:50)

  • RELEVANCY SCORE 2.58

    DB:2.58:Need Help With A Sql Query dk


    Hi All,

    The table has 2 columns: ID and Role. Here is the structure of the table:

    ID Role
    --- ------
    A Manager
    A Tester
    A Director
    B Manager
    B Tester
    C Tester

    Now the question is: I would like to display the roles which have multiple ID. For example: Manager has ID A and B.

    DB:2.58:Need Help With A Sql Query dk

    Hi and welcome to the forum.

    You might want to give the query below a whirl.
    (change t into your actual table name, and omit the with part)

    MHO%xe with t as ( -- generate sample data:
    2 select 'A' id, 'Manager' role from dual union all
    3 select 'A', 'Tester' from dual union all
    4 select 'A', 'Director' from dual union all
    5 select 'B', 'Manager' from dual union all
    6 select 'B', 'Tester' from dual union all
    7 select 'C', 'Tester' from dual
    8 )
    9 --
    10 -- actual query:
    11 --
    12 select role
    13 , count(distinct(id))
    14 from t
    15 group by role
    16 having count(distinct(id)) 1;

    ROLE COUNT(DISTINCT(ID))
    -------- -------------------
    Manager 2
    Tester 3

  • RELEVANCY SCORE 2.58

    DB:2.58:E-Pi (E-Tester Programming Interface) jp


    Hi All,

    Currently we are using the e-Tester 8.20.0526 version and trying to upgrade to latest version to get e-PI (e-Tester Programming interface). With latest version will e-PI gets as default addin or need to buy separately?

    Please suggest us.

    Thanks in Advance.

    DB:2.58:E-Pi (E-Tester Programming Interface) jp

    Hi All,

    Currently we are using the e-Tester 8.20.0526 version and trying to upgrade to latest version to get e-PI (e-Tester Programming interface). With latest version will e-PI gets as default addin or need to buy separately?

    Please suggest us.

    Thanks in Advance.

  • RELEVANCY SCORE 2.58

    DB:2.58:A Torrent 77


    when downloading much of anything, this word: torrent seems to be popping up everywhere. im not familiar with it, and was wondering if i could get a detailed definition of what it means and what i need to do or avoid doing.. thanks!
    -mal:)

    DB:2.58:A Torrent 77

    Although this isn't really a Windows 7 question...
    Torrent is a somewhat generic term for a specific type of peer-to-peer file sharing. See the following Wikipedia article for more information:http://en.wikipedia.org/wiki/BitTorrent_(protocol).

    It's mostly used to upload and download (illegally pirated) media files such as MP3s and videos. But it's also used by some Linux distros to distribute patches and the like, and that's usually legal. AFAIK Microsoft doesn't use BitTorrent for
    any of their software or patches, so if you've downloaded their software via a torrent it's probably pirated.

  • RELEVANCY SCORE 2.58

    DB:2.58:Time Capsule Permissions Error With Torrent Client pk


    Hi all.. i'm having a problem with using my torrent client with Time capsule and i'm wondering if anyone can help me at all?I am using time caspsule as a wireless external hard drive with my macbook pro. And i'm using it to store my torrent files and as a download foler for my torrents. Lately my torrent client(i've used both transmission and Utorrent) has been giving me permission/data missing errors.What hapens when i start downloading a torrent is that it will start downloading for about 30 seconds and then gives an error saying either permission denied or data missing.I'm assuming this is happening because somewhere there are permissions on the time capsule that prevents the torrent client from reading and writing to it.However when i bring up the info on any folders in the time capsule it clearly startes that i have read/write permissions for all user types.That being said, i notice that when i bring up the information window of the time capsule as a whole(similair to viewing an external hard drive info) and view the permissions, i notice that permissions for 'unkown' users are 'read/write', however permissions for 'everyone' are 'no access'. i'm not sure if this is contributing to the torrent client error. When i try to change the permission for 'everyone' a messafe comes up saying that i don't have priveledges to change the setting! and i can't figure out how to change this setting. i'm not even sure if this is what i need to change tho.I am the only user for this time capsule and my macbook pro is the only computer connected to it. i am using airport to connecr to it and i ccess internet through it. I can still transfer files and open up files on the time capsule through my macbook pro. i can access everything on it, it's just that both transmission and utorrent seem to be having trouble accessing the files on it due to some permissions settings which i must need to chang to allow access. however tranmission / utorrent have no issues with dealing with torrent files on my hard drive on my macbook pro, so i;m sure its not an issue with te torrrent client itself.Any help would be much appreciated!thanks!

    DB:2.58:Time Capsule Permissions Error With Torrent Client pk

    Many thanks for help LP....I had tried granting acces to guest through aiport utilities before and i still had the same issue ...i went in and did another reset (perhaps the changes weren't saved before). I then tried changing my torrent settings to trash torrent files upon launch. somehow it seems to be working ok now .... not sure exaclty why it's working now ..i dunno.. maybe becasue i was saving the torrent files themselves to the TC... that being said it was working for a while before i made these changes and then suddenly stopped.. so perhaps it could happen again?but for now it seems ok ...

  • RELEVANCY SCORE 2.58

    DB:2.58:Bsod Windows 8 Pro When Starting Download With Torrent Client (Bittorrent Torrent) fz


    i have upgraded my Laptop HP Pavillion G4 1104Tx from Wins 7 Home Pro to Wins 8 Pro, then when i using the Bittorrent to download some files, suddenly i got the BSOD saying Bad_Pool_Caller, after that every time when i try to download torrent file
    it will always got that BSOD

    is there anyway to fix it ?

    thanks

    DB:2.58:Bsod Windows 8 Pro When Starting Download With Torrent Client (Bittorrent Torrent) fz

    Please post in Windows 8 forums, this is for Win XP. Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • RELEVANCY SCORE 2.58

    DB:2.58:How To Integrate Visual Studio Team Edition For Software Tester With Visual Studio Laod Test Agent 8m


    Hi,
    Can any one please help me in the set up a Controller - Agent environment (a Rig). What is understood is:
     
    The load simulation architecture consists of a client, controller, and agents.

    I have installed Team edition for software tester on one computer and want to use this computer as a client. The client is used to develop tests, select tests to run, and view test results.
    I have installed Load test agent on second computer and set this computer as controller. Controller is used to administer the agents and collect test results.
    My question are:

    Can we set client and agent on a same computer or i need a different computer machine for agent.

    DB:2.58:How To Integrate Visual Studio Team Edition For Software Tester With Visual Studio Laod Test Agent 8m

    Can we set client and agent on a same computer or i need a different computer machine for agent.

  • RELEVANCY SCORE 2.58

    DB:2.58:Mui Pack pa


    hey,
    try this:
    1. download bitcomet torrent client @ www.bitcomet.com
    2. download torrent @ http://thepiratebay.org/tor/3592558/Vista_32-64_BIT_MUI_-_EN__FR__DE__HE__JA__RU__ES__NL__IT
    3. have fun.

    DB:2.58:Mui Pack pa

    hey,
    try this:
    1. download bitcomet torrent client @ www.bitcomet.com
    2. download torrent @ http://thepiratebay.org/tor/3592558/Vista_32-64_BIT_MUI_-_EN__FR__DE__HE__JA__RU__ES__NL__IT
    3. have fun.

  • RELEVANCY SCORE 2.58

    DB:2.58:Uverse Torrent Downloading Slow??? k9


    Merged with an existing topic

  • RELEVANCY SCORE 2.57

    DB:2.57:Stora Torrent Client 77


    I am a bit of a Stora numpty, so please bare with me.

    How on earth do I use the Stora Torrent software to download a torrent from the internet?

    It appears I can only upload torrents? Is this correct?

    JR

    DB:2.57:Stora Torrent Client 77

    hello

    you have to download the .torrent file

    and then upload it to stora

    so it could download the files inside the .torrent

    greetz!

  • RELEVANCY SCORE 2.57

    DB:2.57:Can I Reassign Safari File Associations? ax


    When Safari downloads a bittorrent file (.torrent), it automatically launches a specific bittorrent client on my computer called Azureus. This client is no longer my preferred application, and I've changed this preference in the Finder's "Get Info" by selecting a new application (Transmission) to be associated with the torrent file type and clicking "Change All".

    However, Safari still thinks Azureus should open torrent files. How can I tell Safari to use Transmission instead? Thanks!

    DB:2.57:Can I Reassign Safari File Associations? ax

    How exactly did you make the changes in Finder "Get Info" area that you noted above...? I'm having this same issue with Azureus and want to change applications...

    Thanks so much-

  • RELEVANCY SCORE 2.57

    DB:2.57:Eu Beta Tester.... zz



    Hi dudes I need help with this...

    There was a recent Beta tester For EU Only

    I signed up and its says we will contact you via email.

    The beta tester is now closed and I've had no reply.

    I come from London btw......

    Its offical,Heres the link:

    http://betatest.software.eu.playstation.com/

    So yeah if you have any info about it like I been declined or they are still picking the beta tester please let me know.

    Thanks !




    DB:2.57:Eu Beta Tester.... zz

    NikeJustDoItNike hat geschrieben:
    Any one got any info?

    Keep this thread alive please.

    No emails have been sent yet. Just be patient and wait.




  • RELEVANCY SCORE 2.57

    DB:2.57:The Built In Bit Torrent Client 9s


    Why are some of the sections of the filter written in black on dark grey! Very difficult to read:

    Also I find that files with an mp4a extension do not seem to transfer correctly. I can't move them or copy them and they don't play. 'Verfy local data' finds they are ok. The Another bit torrent client downloads them correctly.

  • RELEVANCY SCORE 2.57

    DB:2.57:Bit Torrent Client? ap


    Anyone know of a Bit Torrent client that is already usable with the new iMac?

    I have always used Azureus but it won't even start up on the new machine...

    Any suggestions?

    DB:2.57:Bit Torrent Client? ap

    I followed this link on another forum post and
    downloaded a newly patched copy of Azureus that works
    perfect on my Core Duo.

    http://forum.osx86project.org/index.php?showtopic=4814

    Anyone know if this works on an intel mac?

  • RELEVANCY SCORE 2.57

    DB:2.57:How To Download Torrents With C# zj


    I don't know if this is a type of question aloud to be asked but I might as well as ask it and find out.
    First off, is it possible to make a torrent client to download torrents with C#?
    I am not going to get in depth of what I want this for and I know that there are other torrent software out there. The reason that I want to make one is I like having my own things to do stuff.
    All I need to know to start off is just the imports that I need and I can look them up in the API or just mess around seeing what actions I can do in code. If I need any further help I assure you that you will see me asking some stupid question.
    Any help is very muchappreciated.
    Thanks.

    DB:2.57:How To Download Torrents With C# zj

    Hi,
    You have two options here:

    Learn the bittorrent protocol and implement it in C# (http://en.wikipedia.org/wiki/BitTorrent_(protocol))
    Find a library that has already implemented the above and use it
    Rozy Cook linked to something called MonoTorrent, this is a library that has already implemented:

    Server Tracker Client
    So you can just use this in your application.
    Here is information from the Wiki for MonoTorrents:

    Wiki main pagehttp://www.monotorrent.com/wiki/monotorrent
    The client API Reference pagehttp://www.monotorrent.com/wiki/monotorrent/ClientEngine

    You can download their versions here:http://www.monotorrent.com/projects/list_files/monotorrentI think you want the zip archive if you're using windows.
    Remember that bittorrent is just a protocol it's what you make of it that matters.
    Hope this helpsMark good replies as helpful and correct ones as answers! -
    http://blog.filipekberg.se

  • RELEVANCY SCORE 2.57

    DB:2.57:Torrent Problems. ff


    My torrent client, Azereus is telling me that I need to open up port 10143 udp. If anyone one could explain to me how to do that I would be very thankful.

    DB:2.57:Torrent Problems. ff

    Yeah... torrents can be horribly (impossibly) slow..then they speed up.....then they slow down again.... then they speed up.....

    Too much of a pain, in my opinion.

  • RELEVANCY SCORE 2.56

    DB:2.56:Netgear Ms2000 Torrent 39


    Hi

    Could someone help me how to set the torrent client a Netgear MS2000 device?

    Many thanks:

    Georg.

    DB:2.56:Netgear Ms2000 Torrent 39

    Hi, Yes, you need to buy the premium pack. The torrent option is there after an update and disappears after the stora has contacted base to determin whether you have premium or not. If you don't, it disappears.

    Buy the premium pack, it's only $9.99 for a lifetime subscription!