• RELEVANCY SCORE 4.03

    DB:4.03:Sendmail Returnpath kd







    Hi guys,
    Im running Plesk 10.4.4 on Ubuntu 8.04 and would like to know the best way to set the sendmail return path per domain?
    It will be used via php, and I read I can add it in the virtualhost directive ..



    There are things involved in getting it to work outside of vBulletin. Perhaps this would be of some help.

    To change the default sender on unix you must add -f to sendmail_path. For example in a VirtualHost directive:
    php_admin_value sendmail_path /usr/sbin/sendmail -t -i -f webmaster@example.com

    would set the default return-path for mail from that virtual host.

    https://www.vbulletin.com/forum/showthread.php/87768-How-to-change-Return-Path-email-from-Nobody

    DB:4.03:Sendmail Returnpath kd




    Right, I didnt see it before but there are some qmail references in the header.



    Message-ID: 20120115763487723.67323.qmail@mail.my-domain.com

    Return-Path: anonymous@mail.my-domain.com

  • RELEVANCY SCORE 3.23

    DB:3.23:Failed Mail Relay (Internal Server) 3f




    We have a send connector setup for one of our internal servers that runs SendMail. This seems to be working fine however this application doesn't seem to route the mail through. We get the following. Any ideas? Our send connector
    is configured as db2.contoso.local.

    Timestamp : 5/3/2011 11:09:12 AM
    ClientIp :
    ClientHostname : SRV-CAS01
    ServerIp :
    ServerHostname :
    SourceContext : Transport Rule Agent
    ConnectorId :
    Source : AGENT
    EventId : FAIL
    InternalMessageId : 2376751
    MessageId : 2141618086.21304435352102.JavaMail.was@mw-test01.contoso.local
    Recipients : {dev@db2.contoso.local}
    RecipientStatus : {}
    TotalBytes : 2094
    RecipientCount : 1
    RelatedRecipientAddress :
    Reference :
    MessageSubject : Test Subject
    Sender : floorclerk@contoso.local
    ReturnPath : floorclerk@contoso.local
    MessageInfo :
    MessageLatency :
    MessageLatencyType : None
    EventData :d

    DB:3.23:Failed Mail Relay (Internal Server) 3f

    Hi,
    To allow an application relay off exchange server, I recommend we create a new receive connector for relay:
    1. Open EMC, expandto Server Configuration-Hub Transport. In receive connectors tab, create a new receive connector.
    2. In Network tab, add the IP address of the application is in the remote IP range.
    3. In Authentication tab, only select the option Externally Secured.
    4. In permission groups tab, select all items.
    5. Open Services.msc, restart Microsoft Exchange Transport service.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Thanks Gen Lin-MSFT

  • RELEVANCY SCORE 2.97

    DB:2.97:[Jira] Updated: (Hhq-2271) Sendmail "Message Rejected" Processes Get Auto-Discovered As New Sendmail Servers pf




    DB:2.97:[Jira] Updated: (Hhq-2271) Sendmail "Message Rejected" Processes Get Auto-Discovered As New Sendmail Servers pf

    [ http://jira.hyperic.com/browse/HHQ-2271?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel ]Charles Lee updated HHQ-2271:----------------------------- Fix Version/s: (was: 3.2.6) 3.2.7 Sendmail "message rejected" processes get auto-discovered as new sendmail servers --------------------------------------------------------------------------------- Key: HHQ-2271 URL: http://jira.hyperic.com/browse/HHQ-2271 Project: Hyperic HQ Issue Type: Bug Components: Plugins Affects Versions: 3.2.4 Reporter: John Sachs Assignee: Scott Feldstein Priority: Major Fix For: 3.2.7 Sendmail has a feature where it stops accepting messages when the load avg on the machine is over a certain number. The problem is it puts that message in the process listing and since the load avg is always changing, this state will cause the HQ sendmail plugin to detect multiple new sendmail servers. The message in the process listing looks something like sendmail: rejecting connections on daemon MTA: load average: 73 The plugin should ignore these processes.-- This message is automatically generated by JIRA.-If you think it was sent incorrectly contact one of the administrators: http://jira.hyperic.com/secure/Administrators.jspa-For more information on JIRA, see: http://www.atlassian.com/software/jira

  • RELEVANCY SCORE 2.97

    DB:2.97:Sendmail Problems On New Install s3





    Hello,

    We just brought online a new server with v10.3.0 and CentOS 5.5, However we are seeing what appears to be some issues with Sendmail ..

    /etc/init.d/sendmail restart
    Shutting down sendmail: [ OK ]
    Shutting down sm-client: [ OK ]
    Starting sendmail: makemap: error opening type hash map /etc/mail/access: Hard links not allowed
    [ OK ]
    Starting sm-client: [ OK ]

    Anyone have any ideas on how to resolve ??

    rpm -q sendmail
    sendmail-8.13.8-8.el5
    rpm -q sendmail-cf
    sendmail-cf-8.13.8-8.el5

    DB:2.97:Sendmail Problems On New Install s3




    I think itll need a closer to look at to see what the problem is as its one that Ive seen occur before that I can remember. Drop me a PM if youd like me to take a look for you.

  • RELEVANCY SCORE 2.89

    DB:2.89:Configure Sendmail To Reject All Incomming Mail? cc


    how would i configure sendmail on solaris8 to reject or trash all incomming email and still maintain capability to send email?

    DB:2.89:Configure Sendmail To Reject All Incomming Mail? cc

    I found this thread useful and wonder why it some of this information isn't more readily available. Webservers shouldn't be running at mailservers and so the sendmail daemon doesn't boot up. Mail at cron and through .cgi/perl scripts utilize the sendmail on the servers I manage.

    BUT -- in the last six months I find I'm having to reconfigure the sendmail.cf to find a way around an email configuration problem in our networks somewhere.

    I've normally used the smart relay without problem. Now, even though I have the "connect" for mail going out to several different mail relays on the domain, the mail does not get delivered. I've tried to trace it down to one relay and have been unsuccessful.

    The solution, and I don't understand it, is that we've setup a mail relay on a windows box in our domain and I've edited the sendmail.cf to use that mail relay instead of the smart relay.

    In addition, and this is really strange to me, but I'm not a sendmail guru -- we're masquerading as a hotmail.com

    If we don't masquerade as hotmail.com and use our own relay, the mail receipients don't receive mail occasionally. Both of these have to be in place for it to work successfully.

    I think someone, somewhere, has a rule setup incorrectly, but it's beyond the relays we normally default to. With the mail relay setup in our domain, it accepts the mail because it's a relay, but what kind of rule would they possibly setup that accepts us masquerading as someone else???

    Can anyone help explain this?

    I personally would love to see some documentation on how an SA could setup sendmail.cf for their webservers as outgoing and have it RIGHT.

    Thanks for listening.... feel free to say something. :-)

  • RELEVANCY SCORE 2.81

    DB:2.81:Re: Passing Results Between Subs / Functions zp


    Hi,

    I'm fumbling around in the dark and would greatly appreciate some light.

    I have numerous subs that use a fixed directory path. I'd like to change this constant to be the return of another sub, one that searches the network for the directory then passes it back to the main sub. Something along the lines of:

    'CURRENTLY:
    Sub BTframesopen()
    Dim FileNumber As Integer
    FileNumber = FreeFile
    Open "D:\BT\file.txt" For Input As #FileNumber
    ...
    End Sub

    'BUT WANT TO DO:
    Public Function BTpath()
    Dim BTreturn As String
    If Dir("D:\BT", vbDirectory) = "BT" Then
    BTreturn = "D:\BT"
    Else
    If Dir("C:\BT", vbDirectory) = "BT" Then
    BTreturn = "C:\BT"
    End If
    End If
    End Function

    Sub BTframesopen()
    Dim FileNumber As Integer
    FileNumber = FreeFile
    returnpath = (BTpath)
    Open returnpath "\file.txt" For Input As #FileNumber
    ...
    End Sub

    Any help or suggestions would be great.

    S

    DB:2.81:Re: Passing Results Between Subs / Functions zp

    I'm sorry there is a correction.

    Public Function BTpath() As String
    On Error Resume Next
    If Dir("D:\BT", vbDirectory) = "BT" Then BTpath = "D:\BT"
    If Dir("C:\BT", vbDirectory) = "BT" Then BTpath = "C:\BT"
    Err.Clear
    On Error GoTo 0 'this line
    End Function

  • RELEVANCY SCORE 2.81

    DB:2.81:[Jira] Created: (Hhq-1626) Sendmail Plugin Fills Log With Permission Errors 1d


    Sendmail plugin fills log with permission errors------------------------------------------------ Key: HHQ-1626 URL: http://jira.hyperic.com/browse/HHQ-1626 Project: Hyperic HQ Type: Bug Versions: 3.2.0 Reporter: Jon Travis Assigned to: Ryan Morgan Priority: MajorI see a ton of this in the agent.log. 2008-02-08 15:30:05,666 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 15:35:05,808 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 15:40:05,937 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 15:45:06,071 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 15:50:06,202 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 15:55:06,342 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 16:00:06,469 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied2008-02-08 16:05:06,604 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied-- This message is automatically generated by JIRA.-If you think it was sent incorrectly contact one of the administrators: http://jira.hyperic.com/secure/Administrators.jspa-For more information on JIRA, see: http://www.atlassian.com/software/jira

    DB:2.81:[Jira] Created: (Hhq-1626) Sendmail Plugin Fills Log With Permission Errors 1d

    [ http://jira.hyperic.com/browse/HHQ-1626?page=all ] Kashyap Parikh closed HHQ-1626:-------------------------------(Visible to Hyperic Members) Sendmail plugin fills log with permission errors ------------------------------------------------ Key: HHQ-1626 URL: http://jira.hyperic.com/browse/HHQ-1626 Project: Hyperic HQ Type: Bug Versions: 3.2.0 Reporter: Jon Travis Assignee: Scott Feldstein Priority: Major Fix For: 4.0.0, 3.2.2 I see a ton of this in the agent.log. 2008-02-08 15:30:05,666 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 15:35:05,808 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 15:40:05,937 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 15:45:06,071 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 15:50:06,202 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 15:55:06,342 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 16:00:06,469 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied 2008-02-08 16:05:06,604 WARN [ExecutableProcess] pdk/work/scripts/sendmail/hq-sendmail-stat: line 16: cd: /var/spool/mqueue: Permission denied-- This message is automatically generated by JIRA.-If you think it was sent incorrectly contact one of the administrators: http://jira.hyperic.com/secure/Administrators.jspa-For more information on JIRA, see: http://www.atlassian.com/software/jira

  • RELEVANCY SCORE 2.81

    DB:2.81:Sendmail Virtual User Table af



    Hi,Can we setting up virtual user table in ironport?Thanks.Alex Ling

    DB:2.81:Sendmail Virtual User Table af


    Hi Alex,You might want to check the integrated user guide in the IronPort for the command 'aliasconfig'.Depending on your specific needs, the alias table may fit the bill.-whardison

  • RELEVANCY SCORE 2.77

    DB:2.77:Highly Available Sendmail pp


    I note that the SC3.1 Release Notes state:
    Sun Cluster software currently does not have an HA Data Service for the sendmail(1M) subsystem. It is permitted to run sendmail on the individual cluster nodes, but the sendmail functionality will not be highly available, including the functionality of mail delivery and mail routing, queuing, or retry.

    Can a data service for sendmail be created, or is there something inherent in either sendmail or SC that prevents this? If so, what solutions exist for a highly available sendmail configuration that will not leave any queued messages in limbo?

    Thanks,
    Brian

    DB:2.77:Highly Available Sendmail pp

    Can a data service for sendmail be created, or is
    there something inherent in either sendmail or SC that
    prevents this? If so, what solutions exist for a
    highly available sendmail configuration that will not
    leave any queued messages in limbo?You create a redundant sendmail service by setting up several of them.
    DNS MX records ( Mail eXchange ) provides fallback routes and even load sharing
    between several sendmail servers. it is far too expensive to build a sendmail
    cluster service when you can solve the problem with two or three V100 ultrasparc II
    servers.

    //Lars

  • RELEVANCY SCORE 2.77

    DB:2.77:Sendmail 7j


    what is the command to send email from a stored procedure.

    i'm basically looking for an equivalent for the sendmail command.

    DB:2.77:Sendmail 7j

    Hi,

    You can refer to the PL/SQL Server Pages(PSP) sample which demonstrates doing this at :
    http://otn.oracle.com/sample_code/products/ias/sample_code_index.htm

    From this page, select the 'View and read about each sample individually' under PL/SQL Server Pages(PSP) Samples section and find the details under 'Send Mail' sample.

    Regards,
    Srinivas

  • RELEVANCY SCORE 2.76

    DB:2.76:Sendmail fj





    When i send a mail via sendmail the script says it is correct send but the mail is not delivered

    Can somebody help me?

  • RELEVANCY SCORE 2.76

    DB:2.76:Proper Path To Sendmail? 7s





    What is the proper path to sendmail that I should be using? Is it /usr/local/psa/qmail/bin/sendmail -t -i?

    Im still trying to track down my disappearing-email problem with PHP.

    Thanks

    DB:2.76:Proper Path To Sendmail? 7s




    Thank you. I tried that, and it seems to work.

  • RELEVANCY SCORE 2.76

    DB:2.76:Sendmail ck





    hey,
    in horde i went to send an email and it said error cant find sendmail. help, i have the standerd install on 7.3

    thanks

    ~Will

    DB:2.76:Sendmail ck




    hey,
    in horde i went to send an email and it said error cant find sendmail. help, i have the standerd install on 7.3

    thanks

    ~Will

  • RELEVANCY SCORE 2.76

    DB:2.76:Sendmail - Cgi/Perl Scripts 97





    We are moving to a plesk setup - using two servers. So far so Good BUT we have run into a Sendmail Problem.

    Our CGI Perl Scripts use Sendmail to mail out email for our users. THis like Passwords - usernames etc.... We are getting No Errors at all but the mail is not being delivered. I have tried these paths for sendmail.

    /usr/sbin/sendmail
    /usr/lib/sendmail
    /var/qmail/bin/sendmail

    I have even watch the log file using

    tail -f /usr/local/psa/var/log/maillog

    and see nothing from the sendmail.

    When I type sendmail on our old cobalt servers I get a reply but on the plesk I get bash: sendmail: command not found

    Do I have to Install sendmail?

    Big Thanks!

    DB:2.76:Sendmail - Cgi/Perl Scripts 97




    The Problem has been solved! The script above was abot to let us fine tune and locate the problem in our perl scripts. If anyone else is having a problem, get the script above working and then see what different in your script and that one.

    Thanks hardweb!

  • RELEVANCY SCORE 2.76

    DB:2.76:Email Migration - Sendmail To Oracle Email cd


    Hi,

    I have read email migration manual. They have mention, how to migrate from Lotus Note and Exchange. What about from Sendmail (on RedhHat 9) to Oracle Email???

  • RELEVANCY SCORE 2.76

    DB:2.76:Sendmail 87


    hi there,

    is there a GUI for the sendmail server, to do the setup of files ?
    thanks all

  • RELEVANCY SCORE 2.73

    DB:2.73:Qmail - Sendmail Activity jf





    Morning all anyone have any suggestions for the best method to monitor all Qmail – Sendmail activity.

    Any advice would be great.

    Many Thanks

    Chris.

    DB:2.73:Qmail - Sendmail Activity jf




    Morning all anyone have any suggestions for the best method to monitor all Qmail – Sendmail activity.

    Any advice would be great.

    Many Thanks

    Chris.

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail Setup On Oel 5.2 64 Bit sp


    Hi,

    Can anybody please help me with the sendmail installation on OEL 5.3 64 bit?

    Regards, Anirban

    DB:2.66:Sendmail Setup On Oel 5.2 64 Bit sp

    Hi Anirban;

    Can anybody please help me with the sendmail installation on OEL 5.3 64 bit? You dont need to make sendmail instalaltion,it comes by default as i know

    Please follow below steps and see its helpful for your issue:
    1. edit /etc/mail/sendmail.cf PART:

    # "Smart" relay host (may be null)
    DSulak.EXCHANGE SERVER NAME

    2. edit /etc/resolv.conf

    search EXCHANGE SERVER NAME
    nameserver 10.x.x Dns server

    3. edit /etc/mail/ trusted-users and add below to this file
    root
    daemon
    uucp

    4. check services

    ps -elf|grep mail

    if its not running

    service sendmail start

    5. test to send mail

    mail -s "test" xx@xx.com trusted-users

    Regard
    Helios

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail Path Plesk 7.5.2 cp





    please i want to know the path of sendmail
    beacuse when i make formmail it requred the sendmail path

    and if anyone have a easy formmail
    send me it

    DB:2.66:Sendmail Path Plesk 7.5.2 cp




    FormMail Help

    Dear my friends
    i have make a form mail in my website with frontpage 2003
    but it`s not work beacuse i need to FormMail.cgi

    i want this program
    please if anyone have this script give me it
    io_matita@yahoo.com

    thanks

  • RELEVANCY SCORE 2.66

    DB:2.66:Ifs With Email c3


    Has anyone set up and configured iFS 1.1.6 with unix sendMail (solaris 2.6) ?
    Do you need to use to sendMail Pro ?
    null

  • RELEVANCY SCORE 2.66

    DB:2.66:Blank Email Subject, Sender, And Content. pf


    I have a user who receives about 3-5 emails a day that have nothing in the From field, nothing in the subject, and nothing in the content. The full header of the email is:
    Date: Mon, 19 Aug 2013 21:22:15 -0500
    Subject:
    Thread-Index: Ac6dTBYOeV4FGxuTXexjwdLSDsGMw==
    Message-ID:
    FCA568E56C1F424B991FC27C45F41B0254A8EA3FDA@gal02.tandtmarine.local
    X-MS-Has-Attach:
    X-MS-TNEF-Correlator:
    x-gfi-me-message-id: 7DD8131516F15112915400000210@GAL02
    Content-Type: text/plain; charset=us-ascii
    Content-Transfer-Encoding: quoted-printable
    MIME-Version: 1.0
    When I look at the message tracking log for this, it shows the messageid, messagesubject, andsender is blank (empty). However it has a legitimate returnpath. The returnpath value changes but is always an internal valid email address.
    Looking at about 200 tracking entries with EventId DELIVER, the only ones that do not have a MessageId are these crazy ones always to the same recipient

    DB:2.66:Blank Email Subject, Sender, And Content. pf

    Hello,
    I recommend you check if owa has the same issue. If owa also has the issue, I recommend you recreate your account to check the result. (Note: Before you recreate your account, please export your mailbox to pst file).
    If owa doesn't have the issue, please recretae your outlook profile to check the result.

    Cara Chen
    TechNet Community Support

  • RELEVANCY SCORE 2.66

    DB:2.66:Mapi Nt Sendmail Example aa



    MAPI NT Sendmail example (11/17/1999) How to send email on NT via MAPI using PATROL.

    DB:2.66:Mapi Nt Sendmail Example aa


    MAPI NT Sendmail example (11/17/1999) How to send email on NT via MAPI using PATROL.

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail Using Sendmail Of Linux 9d


    could someone help me with the problem:
    I need to send mails using sendmail of linux(I cannot user JavaMail API) using Java.
    Thanks in advance.
    Suman

    DB:2.66:Sendmail Using Sendmail Of Linux 9d

    Hi, I can't find anything about sending email using java classes on the referd www. adress. Is it possible that you post some code about using /usr/sbin/sendmail on the server? Tnx

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail Configuration ka


    I'm having a problem with sendmail configuration whereby reply address bind the hostname along with domain name and exposed the host ip address.
    Any idea on how to resolve these kind of problem ?

    DB:2.66:Sendmail Configuration ka

    I'm having a problem with sendmail configuration whereby reply address bind the hostname along with domain name and exposed the host ip address.
    Any idea on how to resolve these kind of problem ?

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail, Mapi Code For Nt sc



    Sendmail, MAPI code for NT (11/17/1999) Sendmail, MAPI code for NT.

    DB:2.66:Sendmail, Mapi Code For Nt sc


    Sendmail, MAPI code for NT (11/17/1999) Sendmail, MAPI code for NT.

  • RELEVANCY SCORE 2.66

    DB:2.66:Path To Sendmail s7





    Im in need of the path to sendmail, where do I find this?

    Earl

    DB:2.66:Path To Sendmail s7




    Thanks for all the replies...

    Im installing a professional autoresponder system and in the installation it requires the path to sendmail

    Earl

  • RELEVANCY SCORE 2.66

    DB:2.66:Php_Mail() And Sendmail Not Working xz





    Hi there,

    PHP mail () function does not work. Neither does sendmail. I ran this script:

    Code:

  • RELEVANCY SCORE 2.66

    DB:2.66:Anyone Know Of A Good Migration Tool For Sendmail? xk


    Does anyone know a good 3rd party tool to migrate Sendmail to Exchange 2010?

    DB:2.66:Anyone Know Of A Good Migration Tool For Sendmail? xk

    I didn't try it but checking it I couldn't find that it works with Exchange 2010Regards, Mahmoud Magdy Watch Arabic Level 300 Videos about Exchange 2010 here: http://vimeo.com/user3271816 Read pretty advanced Exchange stuff I and other MVPs post here: http://www.enowconsulting.com/ese/blog.asp Or follow my blog: http://autodiscover.wordpress.com
    or our corp blog: http://ingazat.wordpress.com and if you Liked my post please mark it as helpful and accept it as an asnwer

  • RELEVANCY SCORE 2.66

    DB:2.66:Ids 5.1 And Sendmail: How To Configure 7p


    Gentlemen,

    my customer wants to migrate from Solaris 8/NIS+/sendmail to Solaris 8 client/Solaris 9+iDS 5.1/sendmail

    Do you know of any restriction in this setup? Is there any document about sendmail/LDAP configuration?

    TIA

    Ivo Ramos

    DB:2.66:Ids 5.1 And Sendmail: How To Configure 7p

    There is a HOW-TO at
    http://www.iconimaging.net/~jradford/sendmail/sendmail-ldap.html

    Hope that helps

  • RELEVANCY SCORE 2.66

    DB:2.66:Migrao Sendmail Para Exchange 2003 3c


    Pessoal alguem tem algum material sobre migração  de  sendmail para  exchange 2003 ?

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail &Amp; Sunone Messaging Server Issue d3


    Hi,
    I am trying to run SunOne messaging server sendmail on same sun box. When i run [b][b]sendmail it gives me an error message " This server is running iPlanet Internet Mail; skipping Sendmail startup." even though i have stopped all SunOne messaging services. if i do netstat -an|grep for 25 110 it does not show anything.

    Is it possible to run sendmail iplanet messaging server on same box if we configue sendmail on some different port? If yes, how to configure sendmail on different port for solaris9?

    Thanks for your help.

    ---Rajeev

    DB:2.66:Sendmail &Amp; Sunone Messaging Server Issue d3

    Why would you want to do that?

    iMS offers sendmail compatibility, for command-line sending, as needed.

    I admit, I'm not familiar with configuring sendmail to use different ports. You'd have to look to sendmail experts for that.

    The message you get during startup is simply how we bypass the startup of sendmail when we install iMS. If you stop iMS, you should be able to start sendmail, ASSUMING that you use the re-named sendmail binary that we move to "sendmail.bak" on iMS installation.

  • RELEVANCY SCORE 2.66

    DB:2.66:Sendmail Emulation? cj





    customer wants to use sendmail (perl script) , is this the answer to my customer: http://kb.swsoft.com/en/144 ?

    Regards,

    Flupke

    DB:2.66:Sendmail Emulation? cj







    customer wants to use sendmail (perl script) , is this the answer to my customer: http://kb.swsoft.com/en/144 ?

  • RELEVANCY SCORE 2.64

    DB:2.64:Sendmail Rpm Destroyed Mail() Functions 1k





    Due to the recent sendmail vulnerability, I installed some sendmail rpm to try and fix the problem. After finding out that psa doesnt use sendmail, it was removed and I restored the link:
    ln -s /usr/local/psa/qmail/bin/sendmail /usr/sbin/sendmail
    So, now the mail() function works in php...however, it doesnt work in webmail..the error I get when I try to send a messege in webmail is the following:
    There was an error sending your message: sendmail [/usr/lib/sendmail] not executable

    Anyone experienced any problems with this or has an idea what a solution would be?
    Thanks for your time.

    DB:2.64:Sendmail Rpm Destroyed Mail() Functions 1k




    A Different Approach

    Upgrading PHP has caused problems like this for several people. It appears to have little or nothing to do with upgrading SendMail.

    Heres a link:
    http://forum.plesk.com/showthread.php?s=postid=37943#post37943

    Good Luck!

  • RELEVANCY SCORE 2.64

    DB:2.64:After 7.01 Upgrade, Sendmail Has Stopped Working pf





    I have upgraded my server from 7.0 to 7.01, now sendmail has stopped working.

    Any ideas?

    DB:2.64:After 7.01 Upgrade, Sendmail Has Stopped Working pf




    Disregard the post above. It was me being stupid again.

  • RELEVANCY SCORE 2.64

    DB:2.64:Voicemail To Email Not Working 7s



    Have a site where Exchange mail server is local (192.168.1.5) to UC320 (192.168.1.254). Also UC320 DMZ address is 192.168.3.254.

    Cannot send email from UC320. We appear to authenticate correctly with user=voicemailsystem. (Does not work with user= voicemailsystem@company.com)

    Aside, when we leave the sensders username and password blank in the "Test SMTP" script, it works.

    Exchange has allowed IPs 192.168.1.254 and 192.168.3.254 to relay SMTP but email sending fails with voicemail user. Any ideas before their Exchange admin gets back here in a few days...:

    Oct 14 15:57:45 UC320W daemon.info sendmail: sendgetmail_main get WAN ip [192.168.3.254] as EHLO identify

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp check EHLO [192.168.3.254] with code -1

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-SERVER.domain.local Hello [192.168.1.254]

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-SIZE

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-PIPELINING

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-DSN

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-ENHANCEDSTATUSCODES

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-AUTH LOGIN

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-X-EXPS GSSAPI NTLM

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-8BITMIME

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-BINARYMIME

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-CHUNKING

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250-XEXCH50

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 250 XRDST

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp check AUTH LOGIN with code -1

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 334 VXNlcm5hbWU6

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp check  with code 334

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 334 UGFzc3dvcmQ6

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp check  with code 235

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 235 2.7.0 Authentication successful

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp check MAIL FROM:voicemailsystem with code 250

    Oct 14 15:57:45 UC320W daemon.info sendmail: smtp_checkp get answer 501 5.1.7 Invalid address

    Oct 14 15:57:45 UC320W daemon.err sendmail: Set Sender failed

    DB:2.64:Voicemail To Email Not Working 7s


    On Exchange run this command to allow open relay after the receive connector is set

    Get-ReceiveConnector "voicemail" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -ExtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient"

  • RELEVANCY SCORE 2.64

    DB:2.64:Failed To Open Sendmail / Horde Not Sending Emails am








    There was an error sending your message: Failed to open sendmail [/var/qmail/bin/sendmail] for execution.

    DB:2.64:Failed To Open Sendmail / Horde Not Sending Emails am




    Just as a future suggestion to anyone who may have this problem...

    My problem was due to the fact that I also run my SMTP service on port 26 due to ISP restrictions for myself and some of my clients...

    If you are doing this as well, and update plesk or make changes to qmail, you may need to re-establish your smtp on port 25 26 again. This fixed my problem both times I did it.

  • RELEVANCY SCORE 2.64

    DB:2.64:Horde - Sendmail [/Usr/Bin/Sendmail] Not Executable c8





    Hi

    When trying to send an email via Horde I get the following error:



    There was an error sending your message: sendmail [/usr/bin/sendmail] not executable

    DB:2.64:Horde - Sendmail [/Usr/Bin/Sendmail] Not Executable c8




    Yes thanks, was looking for this thread to tell you.

    scott to fix this you must change line 107 of /home/httpd/vhosts/webmail/horde/pear/Mail/sendmail.php:
    scott replace
    scott if (@is_executable($this-sendmail_path)) {
    scott with
    scott if (true || @is_executable($this-sendmail_path)) {

    Works perfect! Thanks a lot scott!

  • RELEVANCY SCORE 2.64

    DB:2.64:There Was An Error Sending Your Message: Failed To Open Sendmail [/Usr/Sbin/Sendmail] za





    HI guys, I am new to all this and need some help please.

    any way I have a VPS and cant send emails via Horde Web Mail. I get this.

    There was an error sending your message: Failed to open sendmail [/usr/sbin/sendmail] for execution.

    Plesk platform is: Parallels Plesk Panel version 9.3.0
    PHP: PHP 5.2.14

    any help will be great. Thank you.

    DB:2.64:There Was An Error Sending Your Message: Failed To Open Sendmail [/Usr/Sbin/Sendmail] za




    Thanks I did and this is what my hosting thy said:

    please do remember that this is not a managed server, we do provide these however we charge accordingly.

    so you see any out side help would be helpful. Thank you.

  • RELEVANCY SCORE 2.64

    DB:2.64:Sendmail xk


    Hello,

    sendmail program was included as part of solaris9 installation.
    i like to use the sendmail in a local email server inside the intranet
    and not in the internet.
    what are the steps to activate the sendmail program and use it as i
    described above.

    thanks,
    ny

    DB:2.64:Sendmail xk

    Hello,

    sendmail program was included as part of solaris9 installation.
    i like to use the sendmail in a local email server inside the intranet
    and not in the internet.
    what are the steps to activate the sendmail program and use it as i
    described above.

    thanks,
    ny

  • RELEVANCY SCORE 2.64

    DB:2.64:Removing Sendmail x9


    How can I remove sendmail from my Solaris 8 system.
    Thanks.

    DB:2.64:Removing Sendmail x9

    Hello,

    Just stop the daemon and rename the startup script:

    # /etc/rc2.d/S88sendmail stop
    #mv /etc/rc2.d/S88sendmail /etc/rc2.d/noS88sendmail

    Bye,

    jmiturbe

  • RELEVANCY SCORE 2.64

    DB:2.64:Sendmail Install 8j


    All:

    As is true every 4 months, I need to send a mail to around 500 people. The users are held in a MySQL database, easily accessible, and my preferred method of interaction is using PHP. I do not have Postfix correctly set up, PEAR Mail doesn't seem to work, and so I need to start from scratch.

    My previous solutions have been inadequate at best, so I decided that I would install sendmail. I can find no trace of sendmail on my system, and have been trying to follow the instructions at http://sial.org/howto/sendmail/macosx/10.3-panther/

    However, and although I have downloaded the newest version of Sendmail from sendmail.org, I do not seem to be able to get this installation to run correctly. I have performed the following steps:

    1. Download and unzip tarball
    2. navigate to folder and run sh Build

    Below is an example of the feedback I am getting as this Build supposedly runs : it has been attempting to do so for some time, with no appreciable end in sight. I assume that I have done something incorrect, but what? Did I need to stop a Mail process of some type running beforehand?

    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: libsmdb: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: sendmail: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: editmap: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: mail.local: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: mailstats: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: makemap: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: praliases: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: rmail: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: smrsh: No such file or directory
    Making all in:
    /sendmail.8.13.5/sendmail-8.13.1
    /bin/sh: fork: Resource temporarily unavailable
    /bin/sh: line 1: cd: vacation: No such file or directory

    etc ....

    any help will be most gratefully received

    thanks, Oliver

    DB:2.64:Sendmail Install 8j

    Alex

    thanks for getting in touch again, and apologies for the apparent redundancy of my question.

    I have checked that PEAR has the Mail module installed, however as we concluded back in July it appears not to be working. I therefore took an approach as commented that looked to sendmail.

    You're correct re postfix, of course. I'll go get some documentation and see what I can do. I hope that I don't have too many questions!

    regards, Oliver

  • RELEVANCY SCORE 2.64

    DB:2.64:Return Path Issue dm


    root ./imsimta version
    Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
    libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
    SunOS mx1.tm.net.my 5.10 Generic_118833-36 sun4v sparc SUNW,Sun-Fire-T200

    Currently in my enviroment, send email among internal users will not show "returnpath" parameter in message detail. I need this "returnpath" parameter being showed when I click the message detail in my uwc.

    I have also added "addreturnpath" keyword in lmtp channel, but still no luck. Any idea? Please help.

    DB:2.64:Return Path Issue dm

    kahhaw.thian wrote:
    Any fix for this bug? I still can't get the return path appear....As there was no support case logged by a customer to escalate the bug, there has been no action on it till now. I recommend logging a support case and requesting that the bug be escalated for a fix.

    As for why the workaround isn't working in your particular case, that should also be investigated as part of the support case.

    Regards,

    Shane.

  • RELEVANCY SCORE 2.64

    DB:2.64:Sendmail/Webmail Error :( ????? dp





    Tried to send mail with webmail.mydomain.com and got this error:

    There was an error sending your message: sendmail [/usr/lib/sendmail] not executable

    Any ideas how to fix it?

    DB:2.64:Sendmail/Webmail Error :( ????? dp







    Originally posted by Griffith
    Tried to send mail with webmail.mydomain.com and got this error:

    There was an error sending your message: sendmail [/usr/lib/sendmail] not executable

    Any ideas how to fix it?

  • RELEVANCY SCORE 2.64

    DB:2.64:Sending Mail Using Smtp 11


    Hi all,
    I'm trying to write a simple stored procedure which enables sending a mail by using SMTP. The SQL Script for the procedure is as follows.
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE PROCEDURE sendMail
    @FromAddress VARCHAR(100),
    @ToAddress VARCHAR(100),
    @Subject VARCHAR(100),
    @Body NVARCHAR(4000)

    AS
    BEGIN

    SET NOCOUNT ON;
    DECLARE @sendMail int
    DECLARE @resultCode int

    EXEC @resultCode = sp_OACreate 'SMTPsvg.Mailer', @sendMail OUT
    if @resultCode = 0
    BEGIN
    EXEC @resultcode = sp_OASetProperty @sendMail, 'FromAddress', @FromAddress
    EXEC @resultcode = sp_OASetProperty @sendMail, 'ToAddress', @ToAddress
    EXEC @resultcode = sp_OASetProperty @sendMail, 'Subject', @Subject
    EXEC @resultcode = sp_OASetProperty @sendMail, 'Body', @Body
    EXEC sp_OAMethod @sendMail,'Send()'
    EXEC sp_OADestroy @sendMail
    END
    SET NOCOUNT OFF;
    GO
     
    But whenever I try to execute the query, the following error comes up.
     
    Msg 102, Level 15, State 1, Procedure sendMail, Line 30
    Incorrect syntax near ';'.
     
    I tried to google the error, but was unable to find any positive results.

    DB:2.64:Sending Mail Using Smtp 11

    You are missing an END statement in your T-SQL. This means that you are still defining the stored procedure when you hit the semicolon. Is suspect you just need a second END statment after the first.

  • RELEVANCY SCORE 2.64

    DB:2.64:Problem In Arabic Url Parameters 8f


    I have created a webpart which displays documents from document libraries. Some of the documents are having file name in Arabic. When someone clicks on a document, number of hits for that document are increment and I have added a parameter in URL ReturnPath
    carries the filename, after increment in number of hits I used HttpContext.Current.Response.Redirect(HttpContext.Current.Request.QueryString[ReturnPath].ToString()) way to redirect to the file. This this works well in the title of the file is in english.
    I case of Arabic file name it do not open the file, it takes me to the Document library and in URL I can see something like this:
    /Documents/Forms/AllItems.aspx??????%20??%20?????%202009.pdf
    I tried enconding the url, decoding it but didn't worked...
    Thanks for help.Muhammad Kamran Rafi
    kamran_rafi@hotmail.com
    SharePoint Developer
    www.kamranrafi.com

    DB:2.64:Problem In Arabic Url Parameters 8f

    Finally
    HttpUtility.UrlPathEncode(file.ServerRelativeUrl.ToString()); solve my problem..Muhammad Kamran Rafi
    kamran_rafi@hotmail.com
    SharePoint Developer
    www.kamranrafi.com

  • RELEVANCY SCORE 2.64

    DB:2.64:Sendmail Smtpauth ( Smart-Relay Host Needs Username) 8c


    Does anyone know how to get Solaris 10 sparc to have sendmail use smtp-auth. I need a username and password to connect to my smart-relay host.

    DB:2.64:Sendmail Smtpauth ( Smart-Relay Host Needs Username) 8c

    Does anyone know how to get Solaris 10 sparc to have sendmail use smtp-auth. I need a username and password to connect to my smart-relay host.

  • RELEVANCY SCORE 2.64

    DB:2.64:Sendmail Rpms...? 3m





    I know plesk dont use sendmail, but is it dangerous to remove the sendmail rpms.. I have these installed:

    sendmail-cf-8.11.6-25.73
    sendmail-devel-8.11.6-25.73

    DB:2.64:Sendmail Rpms...? 3m




    You can safely remove those RPMs.

  • RELEVANCY SCORE 2.60

    DB:2.60:Sendmail zz


    Hi everyone,

    I'm a novice . Can anybody help me point out the step-by-step procedure how to configure sendmail on intel platform with Solaris 8 installed on it .

    Thanx.

    DB:2.60:Sendmail zz

    I made this quick guide for myself. These are the very very basics for a home user. A "real server" configuration needs much more. But at least, you'll be able to send mail using.. Sendmail! :)

    STEP 1: Correct the "My unqualified host name (localhost) unknown; sleeping for retry" error.

    To do this, edit /etc/hosts and enter a "fully qualified name". For example, change the line
    127.0.0.1 localhost loghost www
    to
    127.0.0.1 www.foo.com localhost loghost mailhost www

    STEP 2: Disable sendmail listening on port 587

    Edit /etc/mail/sendmail.cf
    Find the line:
    O DaemonPortOptions=Port=587, Name=MSA, M=E
    and comment it.

    STEP 3: Enter your "Smart" relay host

    Edit /etc/mail/sendmail.cf
    Find the line:
    DSmailhost$?m.$m$.
    and enter your ISP's mailserver, e.g:
    DSmail.myisp.com

    STEP 4: Sendmail SHOULD NOT use DNS

    Edit /etc/mail/sendmail.cf
    Find the line:
    #O ResolverOptions=+AAONLY
    Immediately after this point, insert the lines:
    # Don't use DNS
    O ResolverOptions=-DNSRCH

    STEP 5: Set your PrivacyOptions

    Edit /etc/mail/sendmail.cf
    Find the line:
    O PrivacyOptions=authwarnings
    and add those you need, separated with commas. Available options:

    authwarnings (Insert X-Authentication-Warning header)
    needexpnhelo (Force remote site to perform HELO before EXPN)
    needmailhelo (Force remote site to perform HELO before MAIL)
    needvrfyhelo (Force remote site to perform HELO before VRFY)
    novrfy (Disable VRFY command)
    noexpn (Disable EXPN command)
    noverb (Disable VERB command)
    public (Don't place restrictions on SMTP syntax)
    goaway (Set privacy flags authwarnings, needexpnhelo, needmailhelo, needvrfyhelo, novrfy, noexpn)
    noetrn (Disable the ETRN command)
    noreceipts (Ignore DSN requests)
    nobodyreturn (Don't return the body of a message with DSNs)
    restrictmailq (Restrict queue access to group ownership of queue directory)
    restrictqrun (Restrict queue processing to root)

    STEP 6: Test your configuration

    Restart sendmail (/etc/init.d/sendmail start|stop) and test your configuration to see if it's working.

  • RELEVANCY SCORE 2.60

    DB:2.60:Sendmail Subject Line sk


    Is there any way I can have system mail from a box have a default Subject line? I am running Solaris 9 and sendmail version 8.12.10.

    DB:2.60:Sendmail Subject Line sk

    Depends on how you are generating the mail. if it's thru a crontab job you can use 'mailx -s "subject line here".

  • RELEVANCY SCORE 2.60

    DB:2.60:Installing Sendmail mj


    Hi!
    I am trying to install sendmail-8.13.5 and there's an error on the screen when I try su make 'sh Build' in sendmail/ directory:

    In file included from debug.c:11:
    ../../sendmail/sendmail.h:1323:23: phclient.h: No such file or directory
    In file included from debug.c:11:
    ../../sendmail/sendmail.h:1329: error: parse error before "PH"
    ../../sendmail/sendmail.h:1329: warning: no semicolon at end of struct or union
    ../../sendmail/sendmail.h:1332: error: parse error before '}' token
    make#91;1#93;: *** #91;debug.o#93; Error 1
    make#91;1#93;: Leaving directory `/root/sendmail-8.13.5/obj.SunOS.5.9.sun4/libsmutil'
    make: *** #91;/root/sendmail-8.13.5/obj.SunOS.5.9.sun4/libsmutil/libsmuti l.a#93; Error 2

    Someone can help me?

    DB:2.60:Installing Sendmail mj

    Hi!
    I am trying to install sendmail-8.13.5 and there's an error on the screen when I try su make 'sh Build' in sendmail/ directory:

    In file included from debug.c:11:
    ../../sendmail/sendmail.h:1323:23: phclient.h: No such file or directory
    In file included from debug.c:11:
    ../../sendmail/sendmail.h:1329: error: parse error before "PH"
    ../../sendmail/sendmail.h:1329: warning: no semicolon at end of struct or union
    ../../sendmail/sendmail.h:1332: error: parse error before '}' token
    make#91;1#93;: *** #91;debug.o#93; Error 1
    make#91;1#93;: Leaving directory `/root/sendmail-8.13.5/obj.SunOS.5.9.sun4/libsmutil'
    make: *** #91;/root/sendmail-8.13.5/obj.SunOS.5.9.sun4/libsmutil/libsmuti l.a#93; Error 2

    Someone can help me?

  • RELEVANCY SCORE 2.60

    DB:2.60:Sendmail Form ? cp


    Hi all
    Can somebody post code here "Sendmail Form"?
    thanx

    DB:2.60:Sendmail Form ? cp

    import javax.mail.Message;
    import javax.mail.MessagingException;
    import javax.mail.Session;
    import javax.mail.Transport;
    import javax.mail.internet.AddressException;
    import javax.mail.internet.InternetAddress;
    import javax.mail.internet.MimeMessage;

    import javax.servlet.RequestDispatcher;
    import javax.servlet.ServletConfig;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    import javax.servlet.http.HttpSession;

    import java.io.BufferedReader;
    import java.io.IOException;
    import java.io.PrintWriter;
    import java.util.Date;
    import java.util.StringTokenizer;

    /**
    *
    * @author
    * @version
    */
    public class MailServlet extends HttpServlet {

    /** Add code to handle GET
    * @param request HttpServletRequest
    * @param response HttpServletResponse
    */
    public void doGet(HttpServletRequest request,
    HttpServletResponse response)throws ServletException{
    doPost(request,response);
    }

    /** Add code to handle POST
    * @param request HttpServletRequest
    * @param response HttpServletResponse
    */
    public void doPost(HttpServletRequest request,
    HttpServletResponse response) throws ServletException{
    try{
    //Get all the parameters from the Request
    String toAddress = request.getParameter("TO");
    String ccAddress = request.getParameter("CC");
    String messageSubject = request.getParameter("SUBJECT");
    String messageText = request.getParameter("MESSAGE_TEXT");

    //Remove all white space
    toAddress = toAddress.trim();
    ccAddress = ccAddress.trim();
    messageSubject = messageSubject.trim();
    messageText = messageText.trim();

    if(toAddress.length() == 0 || messageSubject.length() == 0
    || messageText.length() == 0){
    _sendToErrorPage(request,response);
    }else{
    InternetAddress[] toAddresses = _parseTargetAddresses(toAddress,request,response);
    InternetAddress[] ccAddresses = _parseTargetAddresses(ccAddress,request,response);
    _sendMessage(toAddresses,ccAddresses,messageSubject,messageText,request,response);
    }

    RequestDispatcher rd = getServletContext().getRequestDispatcher(Resources.MAIL_SENT);
    rd.forward(request,response);
    }catch(IOException ex){
    throw new ServletException(ex.toString());
    }
    }

    private void _sendMessage(InternetAddress[] toAddressesIn,
    InternetAddress[] ccAddressesIn,
    String messageSubjectIn,
    String messageTextIn,
    HttpServletRequest request,
    HttpServletResponse response) throws ServletException{
    try{
    Message msg = new MimeMessage(Session.getDefaultInstance(System.getProperties(),null));

    msg.setFrom(new InternetAddress(Resources.FROM_ADDRESS));
    msg.setRecipients(Message.RecipientType.TO,toAddressesIn);
    msg.setRecipients(Message.RecipientType.CC,ccAddressesIn);
    msg.setSubject(messageSubjectIn);
    msg.setSentDate(new Date());
    msg.setText(messageTextIn);

    _parseMessageText(messageTextIn);

    Transport.send(msg);

    }catch(MessagingException ex){
    _sendToErrorPage(request,response);
    }
    }

    private InternetAddress[] _parseTargetAddresses(String addressString,
    HttpServletRequest request,
    HttpServletResponse response)
    throws ServletException{

    StringTokenizer tokenizer = new StringTokenizer(addressString, Resources.DELIMITER);
    int addressListLength = tokenizer.countTokens();
    InternetAddress[] addressList = new InternetAddress[addressListLength];

    for(int i=0; iaddressListLength; ++i){
    try{
    addressList[i] = new InternetAddress((tokenizer.nextToken()).trim());
    }catch(AddressException ex){
    _sendToErrorPage(request,response);
    }
    }

    return addressList;
    }

    private void _sendToErrorPage(HttpServletRequest request,
    HttpServletResponse response)
    throws ServletException{
    try{
    RequestDispatcher rd = getServletContext().getRequestDispatcher(Resources.MAIL_ERROR);
    rd.forward(request,response);
    }catch(IOException ex){
    throw new ServletException(ex.toString());
    }
    }

    private void _parseMessageText(String message){
    StringTokenizer tokens = new StringTokenizer(message,"\n");

    String actualContent = new String();

    while(tokens.hasMoreTokens()){
    //System.out.println(tokens.nextToken());
    String nextToken = tokens.nextToken();
    nextToken = nextToken.trim();
    if(nextToken.length() != 0){
    actualContent = actualContent + nextToken + "br";
    }
    }

    }
    }

    Note: This code will not compile as it is as some of the dependent classes are missing, but this should give you an idea as to how to send e-mail from your web-page.

    Good Luck!
    Eshwar Rao
    Developer Technical Support
    Sun microsystems inc
    http://www.sun.com/developers/support

  • RELEVANCY SCORE 2.60

    DB:2.60:Sendmail 9d


    can any one tell about sending mails using sendmail i mean the config files and the cmd to send mail to the local domain users.

    reddy

    DB:2.60:Sendmail 9d

    can any one tell about sending mails using sendmail i mean the config files and the cmd to send mail to the local domain users.

    reddy

  • RELEVANCY SCORE 2.60

    DB:2.60:How To Use Task Sendmail ks



    does anyone know what the difference between using task sendmail in step 'Activity' and step 'SendMail'. what's the result between them?

    DB:2.60:How To Use Task Sendmail ks


    The difference is in presentation to you in the workflow builder. I would say it is mostly a choice between simplicity (SendMail step type) and having full control (task using SELFITEM.SendTaskDescription). You can e.g. use the SendMail step type first - during initial development just to get it working, and then delete that step and reuse the task that was created in an ordinary activity step to have full control of all the parameters.

  • RELEVANCY SCORE 2.60

    DB:2.60:Configure Sendmail To Forward To Ironport s8



    Hi all...I'm using a C100 in front of our sendmail installation. As of today, only incoming mails are routed via the IP appliance. How do you guys configure sendmail to deliver local mails locally and forwad all mails for the Internet to the IronPort appliance? Is the SMARTHOST (http://www.elandsys.com/resources/sendmail/smarthost.html) the right path to follow?Thanks for the inforeto

    DB:2.60:Configure Sendmail To Forward To Ironport s8


    Hi,in your mailpolicies, in HAT overview, you should add your internal mailservers to the sendergroup (relaylist) for your private listener.Kr,

  • RELEVANCY SCORE 2.60

    DB:2.60:Ds 5.2 Sendmail s8


    Can someone tell me how to confgure DS 5.2 with sendmail?

    DB:2.60:Ds 5.2 Sendmail s8

    Can someone tell me how to confgure DS 5.2 with sendmail?

  • RELEVANCY SCORE 2.60

    DB:2.60:Sendmail Setup On Solaris 7 33


    All
    I have never setup sendmail. Can anyone help me how to setup sendmail. I have read sun doc on sendmail but i was confused by reading them.
    Anybody have done is before??

    Your help is really appreciated

    Thanks
    Pranozzol

    DB:2.60:Sendmail Setup On Solaris 7 33

    All
    I have never setup sendmail. Can anyone help me how to setup sendmail. I have read sun doc on sendmail but i was confused by reading them.
    Anybody have done is before??

    Your help is really appreciated

    Thanks
    Pranozzol

  • RELEVANCY SCORE 2.60

    DB:2.60:Setting Up Sua For Sendmail / Mailx j1



    How do we set up sendmail in a Windows Server 2008 R2 Standard SUA environment? We have successfully sent ourselves email from this windows server. We are attempting to get mailx / sendmail working under SUA.
    We have changed the smart host in our /etc/mail/ sendmail.cf

    # Smart relay host (may be null)
    DSmail.abbott.com

    We are trying to start our sendmail deamon and we get the error below:

    $ ./sendmail start
    sendmail started

    $ 550 Permission denied (real uid not trusted)

    How do we set up sendmail on Windows server 2008 R2 Standard SUA environment?

    Mike Jaworek DBA

    DB:2.60:Setting Up Sua For Sendmail / Mailx j1


    How do we set up sendmail in a Windows Server 2008 R2 Standard SUA environment? We have successfully sent ourselves email from this windows server. We are attempting to get mailx / sendmail working under SUA.
    We have changed the smart host in our /etc/mail/ sendmail.cf

    # Smart relay host (may be null)
    DSmail.abbott.com

    We are trying to start our sendmail deamon and we get the error below:

    $ ./sendmail start
    sendmail started

    $ 550 Permission denied (real uid not trusted)

    How do we set up sendmail on Windows server 2008 R2 Standard SUA environment?

    Mike Jaworek DBA

  • RELEVANCY SCORE 2.60

    DB:2.60:Where Can I Download Sendmail For Nt? ax


    Anyone know the place to download Sendmail 3.0 for NT ??
    Thanks alot.

    DB:2.60:Where Can I Download Sendmail For Nt? ax

    Anyone know the place to download Sendmail 3.0 for NT ??
    Thanks alot.

  • RELEVANCY SCORE 2.59

    DB:2.59:Pop Before Smtp On Sendmail cs


    Hi ,

    I am trying to send out mails using sendmail, but the server requires SMTP authentication.

    Does any one know , as to how this can be done.

    DB:2.59:Pop Before Smtp On Sendmail cs

    Hi ,

    I am trying to send out mails using sendmail, but the server requires SMTP authentication.

    Does any one know , as to how this can be done.

  • RELEVANCY SCORE 2.59

    DB:2.59:How To Make Sendmail 8.13.7+Sun To Authenticate Itself As A Client 38


    My ISP wants my MTA to authenticate itself.
    Under a standard sendmail 8.13.7 one can use
    FEATURE(authinfo)and the file authinfo with a proper entry to make the sendmail to authenticate itself.
    But there is no
    FEATURE(authinfo)under Sun version of sendmail.

    What shall I do?

    DB:2.59:How To Make Sendmail 8.13.7+Sun To Authenticate Itself As A Client 38

    Thank you for advice.

    I thought Sun provided a standard way to solve a common problem with sendmail.

  • RELEVANCY SCORE 2.59

    DB:2.59:Qmail Wrapper --- Sendmail 3c





    Hello,

    ive found that there is a way to lett all sendmail script work with Qmail by using a sendmail wrapper. Does anybody know How TO or is this standard installed by Plesk , or how do i enable this.

    Thankx in advance

    Angelo

    DB:2.59:Qmail Wrapper --- Sendmail 3c




    Yes, or /usr/sbin/sendmail (the sym link) which is where you would normally think to look for sendmail on many systems...

  • RELEVANCY SCORE 2.59

    DB:2.59:How To Confiure Sendmail In Sloaris 10 1c


    pls explain me how to setup sendmail .in my concern we 30 windows work station
    one solaris 10 x86 server i want to configure sendmail

    DB:2.59:How To Confiure Sendmail In Sloaris 10 1c

    Configure sendmail.cf file and use the command sendmail.

  • RELEVANCY SCORE 2.59

    DB:2.59:/Etc/Default/Sendmail And Privacy Options 7f


    How one can configure PrivacyOptions goaway in /etc/default/sendmail?

    I had configure sendmail in all my Solaris servers to have PrivacyOptions = goaway. I used m4 utility and sendmail.mc file to configure sendmail. Everything was working fine until a sendmail patch overwrote sendmail.cf file directly. It did not use m4 utility and sendmail.mc file I read that in sendmail man pages that one can use /etc/default/sendmail file to specify options that should survive between sendmail updates.

    DB:2.59:/Etc/Default/Sendmail And Privacy Options 7f

    How one can configure PrivacyOptions goaway in /etc/default/sendmail?

    I had configure sendmail in all my Solaris servers to have PrivacyOptions = goaway. I used m4 utility and sendmail.mc file to configure sendmail. Everything was working fine until a sendmail patch overwrote sendmail.cf file directly. It did not use m4 utility and sendmail.mc file I read that in sendmail man pages that one can use /etc/default/sendmail file to specify options that should survive between sendmail updates.

  • RELEVANCY SCORE 2.59

    DB:2.59:11.5 Sendmail Path sp





    Can someone please show me where in the release notes it says the sendmail path has changed? I upgraded to 11.5 the other day and all of my sites suddenly were unable to send email. I use sendmail for those sites with the old path being /usr/sbin/sendmail.postifx, now it seems that path has changed to /usr/sbin/sendmail.

    Why was this changed and why werent we notified?

    DB:2.59:11.5 Sendmail Path sp




    Are you getting any error while sending the mail through your sites with the sendmail ?

  • RELEVANCY SCORE 2.58

    DB:2.58:Plesk And Sendmail aa





    I am about to start using plesk however I believe it uses qmail. Is there any way I can make it use sendmail

    DB:2.58:Plesk And Sendmail aa




    Nope, but qmail works great. Youll have no problems with it.

  • RELEVANCY SCORE 2.58

    DB:2.58:Sendmail And Host File 78


    How can I get sendmail to read etc/hosts when I boot our solaris machine?

    DB:2.58:Sendmail And Host File 78

    Hi

    The order of name lookups depends on what has been set in the file /etc/nsswitch.conf.
    Usually the name lookup will first take place in /etc/hosts, then DNS
    the entry in /etc/nsswitch.conf will look like this:
    ........
    hosts: files dns
    ..........

    During the boot process, the hosts file is used to configure the basics of the host so that it
    can get up and running on the network. Sendmail will start at run level 2 after any name service
    is running, but will resolve itself with the local host file if the setup is as above.

    If your post is regarding the "unable to qualify my own domain name - using short name"
    message that gets posted to /var/adm/messages, you will need to put a fully qualified domain
    name into the /etc/hosts file.

    regards

  • RELEVANCY SCORE 2.58

    DB:2.58:How To Send Email From Javamail To Linux's Sendmail (Smtp)? 7a


    Dear Friends,
    I have following infrastructure.

    1) Linux having sendmail(working on SMTP) configured for sending
    mail to other MTAs.
    Now, plz. suggest me how to send a mail in JavaMail to sendmail so that sendmail can then route it to other MTA's.

  • RELEVANCY SCORE 2.56

    DB:2.56:Vba Excel Sendmail - Problema Com Alerta De Segurana 31


    Olá

    DB:2.56:Vba Excel Sendmail - Problema Com Alerta De Segurana 31

    E ai truta, suave?

    Tenta o seguinte:

    Clique no Botão do Microsoft Office e clique em
    Opções do Excel.Clique em Central de Confiabilidade, clique em Configurações da Central de Confiabilidade e, em seguida, clique em
    Barra de Mensagem.Clique nas opções desejadas:Mostrar a Barra de Mensagem em todos os aplicativos quando o conteúdo do documento tiver sido bloqueadoPor padrão, esta opção é selecionada para que você receba os alertas da Barra de Mensagem sempre que conteúdo com potencial não seguro estiver
    desabilitado. As opção não será selecionada se você tiver
    clicado na opção Desabilitar todas as macros sem notificação no painel
    Macros da Central de Confiabilidade. Se clicar em Desabilitar todas as macros sem notificação, você não receberá os alertas da Barra de Mensagem quando as macros forem desabilitadas.

    Nunca mostrar informações sobre o conteúdo bloqueadoEsta opção desabilita a Barra de Mensagem. Você não receberá alertas sobre nenhum problema de segurança, independentemente das configurações de segurança definidas na Central de Confiabilidade.

    QQr coisa da um gritão!

    É nóis!

  • RELEVANCY SCORE 2.56

    DB:2.56:Sendmail Question xs


    Is there a possibility to use sendmail for linux on another machine with Ifs for Windows NT?

    DB:2.56:Sendmail Question xs

    For scurity reasons, Sendmail has to be running on the same machine as iFS.

  • RELEVANCY SCORE 2.55

    DB:2.55:Jsp Use Of Sendmail? sp


    Is there a function to use sendmail or something similar? Once my users register I'd like to send a confirmation email...

    DB:2.55:Jsp Use Of Sendmail? sp

    What about the Jakarta tag for mail or a commercial version such as dotJ email?

    Did you check these out?

    Jakarta - http://jakarta.apache.org
    dotJ - http://www.dotjonline.com

  • RELEVANCY SCORE 2.54

    DB:2.54:Qmail And Returnpath p7





    Hello,

    im currently setting up a Server with Plesk 7.5.4 on Suse 9.3. Everytime Im adding a new domain to the server, the return-path of server-generated mails changes. It doesnt make any difference on which account Im writing mails through PHP. Its everytime the latest added domain on return path.

    For Example:

    Added domain: blubb.de
    ReturnPath: blubb-de@hostname

    Added domain: blibb.de
    ReturnPath: blibb-de@hostname

    Why this happens? Is there a solution for the problem?

    Greetings,
    Moore

    DB:2.54:Qmail And Returnpath p7







    Originally posted by ShadowMan
    Check if you have more than a single PTR record for each IP address. By default, Plesks DNS template adds a PTR record for every single domain you create. This causes randomly chosen domains to appear in the email headers.

    Generally you would want to remove all other domains PTR records except for a single domains PTR (usually your main hosting domain) per IP address.

    This has existed since Plesk 5 (or possibly earlier) and I believe it is partly related to how Qmail handles things versus other smtp packages...

  • RELEVANCY SCORE 2.54

    DB:2.54:Upgrade 11.5.30 To 12.0.18 Broke Sendmail mc





    Upgrade 11.5.30 to 12.0.18

    Got lots of the following error messages......

    plesk sendmail waitpid failed No child processes.

    DB:2.54:Upgrade 11.5.30 To 12.0.18 Broke Sendmail mc




    hI TO ALL, we have the same problem the sendmail doesnt work after upgrade to plesk 12
    [root@emoserver4 ~]# service sendmail status
    sendmail: unrecognized service
    [root@emoserver4 ~]# /sbin/sendmail status
    -bash: /sbin/sendmail: No such file or directory
    [root@emoserver4 ~]# /sbin/service sendmail status
    sendmail: unrecognized service
    [root@emoserver4 ~]# printf Subject: PRUEBA SENDMAIL | sendmail -vf info@emosistemas.com emayorgas@emosistemas.com
    Mail Delivery Status Report will be mailed to info@emosistemas.com.

    There is a solution for this?
    Thanks a lot

  • RELEVANCY SCORE 2.54

    DB:2.54:Solaris 9 Box Running Sendmail, Mails To Be Migrated To Ms6.2? 89


    How do I migrate all the mails from sendmail to LDAP based Sun Java messenger express 6.2?
    Could you pls provide me the steps?

    DB:2.54:Solaris 9 Box Running Sendmail, Mails To Be Migrated To Ms6.2? 89

    Here, I did it - cleaned up and documented my provision and migration scripts, published in [http://corp.cos.ru/SJSMSMigrate.tgz].
    It is possible that the unchecked changes broke something; hope that's minimal. You should review the scripts and sample files and change example data (domain names, locales, etc.) anyway.

  • RELEVANCY SCORE 2.53

    DB:2.53:Sendmail Cannot Start! a9


    I just rebuilded my new Sendmail packet because I had got some error from my previous Sendmail.
    I added new Group(gid=25) and User(uid=25) named "smmsp" when installation purpose.
    After I finished build-up the Sendmail packet and start it, I have got the error message:

    Jan 30 00:44:28 hostname sendmail[1096]: [ID 801593 mail.alert] g0U0iSKN001096: SYSERR(root): queueup: cannot create queue temp file ./tfg0U0iSKN001096, uid=25: Permission denied

    I have already change the "sendmail" exec file permission to 555.....?

    DB:2.53:Sendmail Cannot Start! a9

    Thanks astade2!
    I just solved the exec file problem.
    But there are some new problems face to me!!

    1. I can't start or stop Sendmail, when I type "sendmail start" or "sendmail stop", they are also no response for me!

    2. I can't find any packets that about sendmail. I used pkginfo |grep sendmail, but there is no result for it.

    4. The SMTP service not start!

    3. I suspect I was not success install the Sendmail packet.

    Following step is my build and install the sendmail packet:
    1. sh Build (In sendmail_root/sendmail)
    2. cp generic-solaris.cf sendmail.cf (In sendmail_root/cf/cf)
    3. sh Build sendmail.cf
    4. sh Build install-cf
    5. create user and group named "smmsp", and this usr is no shell, no home path.
    6. sh Build install (In sendmail_root/sendmail)

    I don't know I was finished or un-finished install the Sendmail? The sendmail program let me trouble!!! o
    I hope everyone or Mr.astade2 can help me something....

  • RELEVANCY SCORE 2.53

    DB:2.53:Sua Sendmail Set Up mp


    How do I set up to use sendmail unders SUA for windows server 2008 r2?

    DB:2.53:Sua Sendmail Set Up mp

    Hi Mike,
    For more specialized assistance on this issue, post your query on
    Windows Server Forums. http://social.technet.microsoft.com/Forums/en-US/winservergen/threads

    Thanks and Regards
    Ajay K
    Microsoft Answers Support Engineer
    ***************************************************************************

  • RELEVANCY SCORE 2.53

    DB:2.53:Wrapper Postfix Plesk 12 1j





    Hi,

    http://kb.odin.com/en/114845 this kb for plesk 12 not run.

    To function did this

    # ls -las sendmail*
    0 lrwxrwxrwx 1 root root 24 sep 17 14:31 sendmail - sendmail.postfix-wrapper
    268 -rwxrwxrwx 1 root postdrop 267232 abr 25 08:41 sendmail.postfix

    *sendmail is symlink to sendmail.postfix-wrapper

    the wrapper:

    #!/bin/sh
    (echo X-Additional-Header: $PWD ;cat) | tee -a /var/tmp/mail.send|/usr/lib64/plesk-9.0/postfix-sendmail-wrapper $@

    The wrapper write in /var/tmp/mail.send and redirect to /usr/lib64/plesk-9.0/postfix-sendmail-wrapper and return to /usr/sbin/sendmail.postfix .

    * why /usr/lib64/plesk-9.0/postfix-sendmail-wrapper?

    I follow links to /etc/alternatives/mta-sendmail and use strings to continue links to /usr/sbin/sendmail.postfix.

    # strings /usr/lib64/plesk-9.0/postfix-sendmail-wrapper | grep postfix
    /usr/sbin/sendmail.postfix

    sendmail - /usr/lib64/plesk-9.0/postfix-sendmail-wrapper + write /var/tmp/mail.send - /usr/sbin/sendmail.postfix

    Saludos,

    DB:2.53:Wrapper Postfix Plesk 12 1j




    Hi,

    http://kb.odin.com/en/114845 this kb for plesk 12 not run.

    To function did this

    # ls -las sendmail*
    0 lrwxrwxrwx 1 root root 24 sep 17 14:31 sendmail - sendmail.postfix-wrapper
    268 -rwxrwxrwx 1 root postdrop 267232 abr 25 08:41 sendmail.postfix

    *sendmail is symlink to sendmail.postfix-wrapper

    the wrapper:

    #!/bin/sh
    (echo X-Additional-Header: $PWD ;cat) | tee -a /var/tmp/mail.send|/usr/lib64/plesk-9.0/postfix-sendmail-wrapper $@

    The wrapper write in /var/tmp/mail.send and redirect to /usr/lib64/plesk-9.0/postfix-sendmail-wrapper and return to /usr/sbin/sendmail.postfix .

    * why /usr/lib64/plesk-9.0/postfix-sendmail-wrapper?

    I follow links to /etc/alternatives/mta-sendmail and use strings to continue links to /usr/sbin/sendmail.postfix.

    # strings /usr/lib64/plesk-9.0/postfix-sendmail-wrapper | grep postfix
    /usr/sbin/sendmail.postfix

    sendmail - /usr/lib64/plesk-9.0/postfix-sendmail-wrapper + write /var/tmp/mail.send - /usr/sbin/sendmail.postfix

    Saludos,

  • RELEVANCY SCORE 2.53

    DB:2.53:Slow Script Error When Accessing Webtop Through Safari 1x


    HiWhen I access webtop using safari, an annoying error message randomly pops up saying Slow script error, http://.xyz.com/domainadmin/frmUser.aspx?ReturnPath=%2fdomainadmin%2ffrmUsers.aspx%3fpage%3d1%26search%3d%26type%3d) is making Safari unresponsive. Do you want to continue running the script, or stop it?Have anybody come across this issue?I am using webtop 5.3 sp6 Mac OS Version 10.4.11Safari Version 3.0.4 (523.12)Java Version 1.5.0_13

    DB:2.53:Slow Script Error When Accessing Webtop Through Safari 1x

    thanks Mahesh,I tried your option, It took out the slow script error but it resulted in the whole safari freezes now.I did some research on the web. It seems as if this problem is prevalent for other users also when accessing different sites (i.e. Gmail) using 10.4.x or 10.5.x. The error is client specific, meaning, the browser is complaining that the script is taking longer to execute. There is probably some user defined value/preference that one can set/change as to varying the timing. From what I've read it could be anywhere from 1 to 20 seconds.

  • RELEVANCY SCORE 2.53

    DB:2.53:Does Exchangeserver Accept In Sendmail Task? p8


    Does exchangeServer accept in SendMail task?
    only SMTP?
     
     
    who knows?
    For internal mail server , it's only via exchange server.

  • RELEVANCY SCORE 2.53

    DB:2.53:Qmail-Inject: Fatal: Qq Read Error (#4.3.0) xm





    When mailing tru sendmail or php ill get the following error:

    echo test | /var/qmail/bin/sendmail info@somedomain.nl

    qmail-inject: fatal: qq read error (#4.3.0)

    /usr/sbin/sendmail is a symbolic link to
    /var/qmail/bin/sendmail

    straight to /usr/sbin/sendmail doesnt work either.

    Its a brand new installalion with upgraded php from yum

    Please help !!!!

    DB:2.53:Qmail-Inject: Fatal: Qq Read Error (#4.3.0) xm




    reinstall qmail gives me....

    setuidgid: fatal: unable to run /var/qmail/bin/qmail-scanner-queue.pl: access denied
    setuidgid: fatal: unable to run /var/qmail/bin/qmail-scanner-queue.pl: access denied

    some one plz help!!

  • RELEVANCY SCORE 2.53

    DB:2.53:Message Tracking Logs Not Showing Hostnames z1


    Hi there,
     
    When I use the message tracking tool or cmdlet the ServerHostname (eventid SEND) and clienthostname (eventid RECEIVE) are not populated on a messagetracking entry. Somehow the hostnames are not resolved'.
    DNS and even WINS is configured properly. Any settings that need to be altered to get the exchange server to resolve the hostnames when receiving or sending out messages?
     
    Cheers,
     
    Mark
     
    examples in bold:
     
    Timestamp               : 5/22/2007 10:15:24 AMClientIp                : 192.168.10.210ClientHostname          : hostnameServerIp                : 192.168.11.101ServerHostname          :SourceContext           : 08C96A607A1E27A3ConnectorId             : Intra-Organization SMTP Send ConnectorSource                  : SMTPEventId                 : SENDInternalMessageId       : 1MessageId               :  ...........................
    Recipients              : ........................RecipientStatus         : {250 2.1.5 Recipient OK}TotalBytes              : 3892RecipientCount          : 1RelatedRecipientAddress :Reference               :MessageSubject          : testSender                  : .....................ReturnPath              : .................MessageInfo             : 5/22/2007 10:15:16 AM
     
    Timestamp               : 5/22/2007 10:15:24 AMClientIp                : 192.168.10.210ClientHostname          :ServerIp                : 192.168.11.101ServerHostname          : ...............SourceContext           : 08C965C0E819AA5F;2007-05-22T08:15:22.881Z;0ConnectorId             : ........\Default..............Source                  : SMTPEventId                 : RECEIVEInternalMessageId       : 4194MessageId               : ................Recipients              : {..........................RecipientStatus         : {}TotalBytes              : 4124RecipientCount          : 1RelatedRecipientAddress :Reference               :MessageSubject          : testSender                  : ..................ReturnPath              : ......................MessageInfo             : 0cI:

    DB:2.53:Message Tracking Logs Not Showing Hostnames z1

    I am having this problem too, did you ever resolve this?

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail Configuration xz


    I need send email to a principal mail server who is mycompany.com.

    My ultra5 server named Myservidor.mycompany.com run sendmail. how to configure sendmaill to do this.

    thanks.

    DB:2.52:Sendmail Configuration xz

    I need send email to a principal mail server who is mycompany.com.

    My ultra5 server named Myservidor.mycompany.com run sendmail. how to configure sendmaill to do this.

    thanks.

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail / Guest Rh9 / Esx 2.1.2 c8



    Hello all

    Does sendmail works on guest RedHat 9.0 and host ESX 2.1.2 ?

    Franois

    DB:2.52:Sendmail / Guest Rh9 / Esx 2.1.2 c8


    Hi Scott

    Does your sendmail work with or without access to your DNS ? I simply cannot make sendmail working with our DNS, but *exactly the same* virtual machine works perfectly well with our DNS on VMware WS4.

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail 8.11.7p1 7j


    Does anyone have an idea why my Exchange Server (2000) gets double space body from this version of sendmail?

    Is there a way to fix this?

    Thanks
    Aaron

    DB:2.52:Sendmail 8.11.7p1 7j

    Does anyone have an idea why my Exchange Server (2000) gets double space body from this version of sendmail?

    Is there a way to fix this?

    Thanks
    Aaron

  • RELEVANCY SCORE 2.52

    DB:2.52:Red Hat Linux Sendmail Server To Exchange Server Migration Steps j8


    Dear All,
    I need  detail information of migration of sendmail server to exchange server
    Kindly help me out
    Regards,
    sampada

    DB:2.52:Red Hat Linux Sendmail Server To Exchange Server Migration Steps j8

    Post the update.Gulab Prasad MCITP: Exchange 2010-2007 | Lync Server 2010 | Windows Server 2008 | MyBlog: www.ExchangeRanger.Blogspot.com | Skype: Exchange.Ranger

  • RELEVANCY SCORE 2.52

    DB:2.52:Rule In Sendmail Option 8j



    I have created a rule and I want to use it in Sendmail task. But there is no option for rule there.

    How can I do it? Please help.

    Thanks

    Abhishek

    DB:2.52:Rule In Sendmail Option 8j


    Agent assignment applies to dialog tasks. You could use SELFITEM.DISPLAYTASKDESCRIPTION, but this is not the same as sending an e-mail.

    SENDTASKDESCRIPTION is a background task, so you can't use agent assignment explicitly.

    A workaround for using a rule in SENDTASKDESCRIPTION would be to create an attribute (of SELFITEM or any other object that you use) that would read the agents by calling 'RH_RESOLVE_RESPONSIBILITIES' and transfer them to e-mail-receiver-alike format.

    Regards,

    Michal

  • RELEVANCY SCORE 2.52

    DB:2.52:Php Mail() d9





    mail() not working in PHP script.

    I read this:



    When mail is sent from PHP script, PHP
    usually uses sendmail binary. Plesk has its own sendmail wrapper, so
    /usr/sbin/sendmail should be symbolic link which points to $QMAIL_ROOT_D/bin/sendmail, please check it.

    DB:2.52:Php Mail() d9




    A symbolic link is like a shortcut in Windows.

    use:

    Code:

  • RELEVANCY SCORE 2.52

    DB:2.52:Php, Sendmail, And Postfix jp


    I used php sendmail function on my web pages until I deleted my sendmail from Mac OS 10.3.9 Server. Is there any way to use postfix with php? or reinstalll sendmail back on Panther server?

    Thank you

    DB:2.52:Php, Sendmail, And Postfix jp

    I used php sendmail function on my web pages until I deleted my sendmail from Mac OS 10.3.9 Server. Is there any way to use postfix with php? or reinstalll sendmail back on Panther server?

    Thank you

  • RELEVANCY SCORE 2.52

    DB:2.52:Help To Setup Sendmail ap


    Hi there,

    Does anyone know how to configure sendmail program on the solaris x86???

    Please help...

    Thanks

    DB:2.52:Help To Setup Sendmail ap

    Hi there,

    read /usr/lib/mail/README.. If you have never touched sendmail before, you could give webmin a try:
    http://www.webmin.com

    What feature(s) are you looking for?

    Regards,

    Chris

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail Security Vulnerability 1a





    Since there is a published exploit, can we get at least a hotfix for the sendmail vulnerability that was recently announced!

    DB:2.52:Sendmail Security Vulnerability 1a




    shortcut:

    ln -sf /usr/local/psa/qmail/bin/sendmail /usr/sbin/sendmail

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail Activity Asynchronously 1z


    can we send mail using Sendmail Activity (given in samples) Asynchronously.
    please tell me.
     
     

    DB:2.52:Sendmail Activity Asynchronously 1z

     
    You never want an activity to spawn a thread - what would happen if while waiting for the async return - the host died?  There woudl be no way to recreate the state of the workflow instance from the persistence store.
     
    You can use my CallWorkflow sample as a guide - http://www.masteringbiztalk.com/wiki/default.aspx/MyWiki/Workflow%20Samples.html
     

  • RELEVANCY SCORE 2.52

    DB:2.52:The Process Cannot Access The File Because It Is Being Used By Another Process sj


    I have files that have a unc path with a filename entered into the comments of the file and I would like to be able to simply read the comments of a given file and if the comments contain a legit unc path then move the file to the location given. When I run this code...Public Sub remigrate(ByVal source As String)        Dim returnPath As String        returnPath = OrigPath(source.ToString)        If returnPath.ToString.Contains(\\) = True Then            System.IO.File.Move(source.ToString, returnPath)        End IfEnd Sub    Private Function OrigPath(ByVal file As String) As String        Dim FileProps As New DSOFile.OleDocumentProperties        FileProps.Open(file, True)        Dim oSumProps As DSOFile.SummaryProperties        oSumProps = FileProps.SummaryProperties        If System.String.IsNullOrEmpty(oSumProps.Comments) = True Then            Return 0        Else            Return oSumProps.Comments.ToString        End If        oSumProps = Nothing        FileProps.Close(False)        FileProps = NothingEnd FunctionI always get this error message. Unhandled Exception: System.IO.IOException: The process cannot access the file because it is being used by another process.   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)   at System.IO.__Error.WinIOError()   at System.IO.File.Move(String sourceFileName, String destFileName)

  • RELEVANCY SCORE 2.52

    DB:2.52:Servlet Using Sendmail sd


    Hi

    Does anyone know or does anyone know where I could get a example of code that allows a servlet to use the SendMail facility on a server.

    Thanks in advance

    Jimmy

    DB:2.52:Servlet Using Sendmail sd

    Thanks Sue

    I only came across JavaMail today in my searches. It
    looks complicated.it isn't

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail Problem / Emails Dont Come Through 91





    I have installed a form handling script in cgi-bin (755).
    When testing the form, the on-screen actions are all right, only an email never arrives at the destination.

    I have read many of the postings and it seems to me that it has to do with the path in my script. I have tried following paths (all fruitless attempts...)

    $SEND_MAIL=/usr/local/psa/qmail/bin/sendmail;

    $SEND_MAIL=/usr/local/psa/qmail/bin/sendmail -t;

    $SEND_MAIL=/usr/local/psa/qmail/sbin/sendmail;

    $SEND_MAIL=/usr/local/psa/qmail/sbin/sendmail -t;

    $SEND_MAIL=/bin/sendmail -t;

    $SEND_MAIL=/bin/sendmail;

    $SEND_MAIL=/usr/sbin/sendmail;

    $SEND_MAIL=/usr/sbin/sendmail -t;

    Does anybody has an idea?

    Many thanks for your help!

    DB:2.52:Sendmail Problem / Emails Dont Come Through 91




    Many thanks for all your help!

    I got it working and the trick was adding

    $SEND_MAIL=/usr/lib/sendmail -t;

    I wish all the others with the same problem lots of success!

    Best regards,
    Frederique

  • RELEVANCY SCORE 2.52

    DB:2.52:Thread: Sendmail On Netware 97


    Anybody has this configured from:

    http://www.gknw.net/nwperl/index.html

    I have an application that works only with sendmail would like to try it

    Thanks

    Seb

    DB:2.52:Thread: Sendmail On Netware 97

    Anybody at all?

    Seb

    Sebastian Cerazy sebastian.cerazy@(nospam)spgs.org wrote in message

    news:XlXdh.10896$jS4.2729@prv-forum2.provo.novell.com...

    Anybody has this configured from:

    http://www.gknw.net/nwperl/index.html

    I have an application that works only with sendmail would like to try it

    Thanks

    Seb

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail Function Question zc


    Hi all,

    Is it possible to send more than one attachment in sendmail function?

    If yes, how is it ?

    Thank you

    DB:2.52:Sendmail Function Question zc

    Hi
    I am trying to use the SendMailJPKG.
    Everything runs fine when I call the Procedure with something hardcoded in the attachmentlist like this.

    :ErrorStatus := SendMailJPkg.SendMail(
    SMTPServerName = 'mail.cortina-systems.com',
    Sender = 'orders@temp-systems.com',
    Recipient = 'myemail@yahoo.com',
    BccRecipient = '',
    Subject = 'This is the subject line: Test JavaMail',
    Body = 'This is the body: Hello, this is a test' ||
    SendMailJPkg.EOL || 'that spans 2 lines',
    ErrorMessage = :ErrorMessage,
    Attachments = SendMailJPkg.ATTACHMENTS_LIST('/tmp/mydir/mm/packslip.pdf'));

    But I need to get the attachments dynamically. Specifically, I have to run two reports and I have to send the outputs from the reports, which are in $APPLCSF/directory as an email attavhment. But the moment I am trying to do it it is not working.
    It is generating the error message like:
    javax.mail.SendFailedException: Sending failed;
    nested exception is:
    javax.mail.MessagingException: IOException while sending message;
    nested exception is:
    java.io.FileNotFoundException: No such file or directory
    javax.mail.MessagingException: IOException while sending message;
    nested exception is:
    java.io.FileNotFoundException: No such file or directory

    Any help will be appreciated.

  • RELEVANCY SCORE 2.52

    DB:2.52:Exchange 2007 Returnpath With Oof Mails Is px


    Hi,

    I'm having difficulties with Out of office emails being sent to external emal adresses. The returnpath header of the message is empty () and gets dropped by our provider.
    I understand this is a feature in MS exchange 2007.
    I thought I would resolve it using Transport Rules and thus created the following rule :
    Apply rule to messages
    From users Inside the organization
    and sent to users Outside the organization
    and when the Subject field contains Out of Office
    Set Return-Path with test@mydomain.com

    After that I rebooted the server, and thus the SMTP service but still the header doesn't get filled.
    Any Ideas?

    Thanks in advance.

    Pieter

    DB:2.52:Exchange 2007 Returnpath With Oof Mails Is px


    On Fri, 29 Oct 2010 06:59:35 0000, Pieter VdB wrote:

  • RELEVANCY SCORE 2.52

    DB:2.52:Change To Smtp.Verizon.Com From Outgoing.Verizon.Com - Sendmail Configuration kf



    What is the configuration needed for sendmail? I'm running under Ubuntu 13.04. Setting up the smart_host stuff and authorization is easy, but I can't remember how to force sendmail to connect to port 465.

    -Nigel

    DB:2.52:Change To Smtp.Verizon.Com From Outgoing.Verizon.Com - Sendmail Configuration kf


    I believe that I have it fixed and can now use Sendmail to send mail out again.

    The pointer is at http://www.dawoodfall.net/index.php/relaying-sendmail-a-ssl which shows where Virgin Media in the UK pulled the same stunt as Verizon. It doesn't quite work as mentioned, you need to put the relay domain in square brackets to avoid MX resolution, however apart from that it's sweet. I didn't set up relay-domain as mentioned.

    Briefly, to enable using sendmail to deliver mail on FIOS:

    1) install stunnel

    2) Create /etc/stunnel/smtp.verizon.net.conf with:

    sslVersion = SSLv3

    [ req ]
    client = yes
    accept = 2525
    connect = smtp.verizon.net:465

    3) /etc/init.d/stunnel restart

    4) Add sendmail.mc:

    define(`SMART_HOST', `[localhost]')dnl
    define(`RELAY_MAILER_ARGS', `TCP $h 2525')dnl
    define(`ESMTP_MAILER_ARGS', `TCP $h 2525')dnl

    5) Add to authinfo:

    AuthInfo:fqdn.of.your.localhost "U:name" "Password" "MLAIN"

    AuthInfo:fqdn.of.your.localhost:2525 "U:name" "Password" "MLAIN"

    6) cd /etc/mail make /etc/init.d/sendmail reload

    And it's done. Easy when you know how!

    -Nigel

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail zs


    Hi,
    Can I reinstall sendmail in Solaris 8? How can I do?

    DB:2.52:Sendmail zs

    Hi,
    Can I reinstall sendmail in Solaris 8? How can I do?

  • RELEVANCY SCORE 2.52

    DB:2.52:Sendmail Is Hanging zx



    whenever sendmail is ran, it just hangs. no output until killed. anyone else have this?

    DB:2.52:Sendmail Is Hanging zx


    well, I tried a simple php page (http://files.twilightlair.net/misc/mail/mailform.php) and got this:
    Mar 16 01:43:26 Imperium postfix/sendmail[6445]: fatal: Recipient addresses must be specified on the command line or via the -t option

  • RELEVANCY SCORE 2.52

    DB:2.52:Re: Mail Command Does Not Work d1


    Please also install sendmail-cf and m4 along with sendmail. :)

    DB:2.52:Re: Mail Command Does Not Work d1

    Changhai,

    Everything is working now. Thanks for your help.
    Regards,

    Hong Wang

  • RELEVANCY SCORE 2.52

    DB:2.52:How To Configure Sendmail In Rhel4 8k


    How can i configure sendmail in rhel4 for receiving mails for crontab updates.

    DB:2.52:How To Configure Sendmail In Rhel4 8k

    Hi Ramaraju,Have you looked at this document: Red Hat Sendmail HOWTO