• RELEVANCY SCORE 4.59

    DB:4.59:What Is The Reason For Below Ib Error, kk





    ib0: dev_queue_xmit failed to requeue packet

  • RELEVANCY SCORE 3.10

    DB:3.10:Mellonex Qsfp Cables - What Is The Difference Between The Qdr Ib Cables And The 40gbe Cables? dx






    Hi

    As per the title?! Is there any reason why I can't use a cable that is tagged as IB for an ethernet QSFP port - obviously with an Ethernet connect-x card? I realise that this will not be supported.

    Kind regards

    E

    DB:3.10:Mellonex Qsfp Cables - What Is The Difference Between The Qdr Ib Cables And The 40gbe Cables? dx


    Hi

    As per the title?! Is there any reason why I can't use a cable that is tagged as IB for an ethernet QSFP port - obviously with an Ethernet connect-x card? I realise that this will not be supported.

    Kind regards

    E

  • RELEVANCY SCORE 3.07

    DB:3.07:Console Multiple Lines Input x8





    Hi
    I have 2 problems with the program below:
    1) What is the eos for Windows/Dos? I tried Ctr-Z but didn't work.
    2) The program never get onto Input for part b. The console was closed without even printing the result of the part a input (cout *It - ;).
    Please help....
    int main ()
    {
    //input for part a:
    istream_iteratorint start_cin(cin);
    istream_iteratorint end_of_cin;
    vectorint v;

    cout Enter sequence of integers
    (eos - quit) : ;
    copy(start_cin,end_of_cin,back_inserter(v));

    for ( vectorint::iterator It = v.begin();
    It != v.end(); It )
    cout *It - ;
    cout endl;
    //input for part b:
    istream_iteratorint start_b_cin(cin);
    vectorint b;

    cout Enter sequence of integers
    (eos - quit) : ;
    copy(start_b_cin,end_of_cin,back_inserter(b));

    for ( vectorint::iterator Ib = b.begin();
    Ib != b.end(); It )
    cout *Ib - ;
    cout endl;

    }

    DB:3.07:Console Multiple Lines Input x8

    When an attempt to extract an integer from a stream fails due to formatting reasons (e.g. a character is encountered that cannot be parsed as part of a number), failbit flag is set on the stream.

    Note however that an extraction is considered successful - so
    the failbit is not set - if at least one valid character has been
    extracted. For example, if you have:

    int num;

    cin num;

    and you enter

    123.45

    the extraction will be successful and the failbit will
    not be set. Variable num will contain 123 and the
    cin stream will still have the characters .45 in it
    awaiting extraction (or ignoring).

    - Wayne

  • RELEVANCY SCORE 2.98

    DB:2.98:Cannot Start Integration Scenario Configurator 3m



    Cannot start integration scenario configurator. IB Configuration shows error:

    Unable to load action. Check whether all the necessary actions have been released in the Integration Repository

    All objects are activated from IB Design. What is my mistake in?

    DB:2.98:Cannot Start Integration Scenario Configurator 3m


    duplicate

    Edited by: MarkLawrence on Dec 24, 2009 8:25 PM

  • RELEVANCY SCORE 2.98

    DB:2.98:What Is Ib Updater Service From Perion Network Ltd. mf


    this is trying to install on my system. is it important? can i remove the downloaded program?

    DB:2.98:What Is Ib Updater Service From Perion Network Ltd. mf

    "IB Updater Service (ExtensionUpdaterService.exe) automatically keeps software created by Perion Network Ltd. up to date."

    [link removed]

  • RELEVANCY SCORE 2.94

    DB:2.94:Getting Error When Using Itemfieldvalue Property fs


    I am using the below lines to get field value but it shows an error unexpected error has occurred
    What is the reason for that,
    How to trace it
     
    if (string.IsNullOrEmpty((string)this.ItemFieldValue))
    {
    lblTreedata.Text = Empty ;
    }
    else
    {
    string s = (string)this.ItemFieldValue;
    }
     
     
    Any ideas?
     

    DB:2.94:Getting Error When Using Itemfieldvalue Property fs

    I am using the below lines to get field value but it shows an error unexpected error has occurred
    What is the reason for that,
    How to trace it
     
    if (string.IsNullOrEmpty((string)this.ItemFieldValue))
    {
    lblTreedata.Text = Empty ;
    }
    else
    {
    string s = (string)this.ItemFieldValue;
    }
     
     
    Any ideas?
     

  • RELEVANCY SCORE 2.88

    DB:2.88:.Png Image Not Shopwing In Uiimageview When Added Through Ib xp


    I changed my .png file in photoshop which usually auto-updates the image in my Xcode project. I am adding the image via interface builder. I can see the image in IB, but for some reason, when I run the app in the simulator, the image is blank.

    I have tried cleaning/re-building the project, rebuilding the NIB from scracth, and cerating a new image altogether with no luck.

    Any suggestions. Could it be photoshop?

    DB:2.88:.Png Image Not Shopwing In Uiimageview When Added Through Ib xp

    That did the trick! Not sure what the issue is with how I am creating/changing my .png files.! Thanks!!!!

    -Kevin

  • RELEVANCY SCORE 2.87

    DB:2.87:Delete Sld Registration In Rwb 8s



    Hi,

    I would like to delete the component Name (Adapter Engine) listed in Non-central components, as the host name/system doesn't exists anymore. The reason I would like to delete is, whenever we make the changes to any IB objects, save and activate and error messge pops up with this host name.

    Thank you

  • RELEVANCY SCORE 2.84

    DB:2.84:Logic Behind Deciding Number Of Databases Per Mailbox Server 9m


    I have a doubt here , more like a missing piece of information. I understand that since we have 4 mailbox servers, we would like to have the copies of databases distributed evenly on all servers , such that incase of failure of any one server, things are
    still up and running. What I dont understand is, what is the reason or logic for deciding the number of databases per server. Why cant we just have one database per mailbox server and have copies of it on the remaining servers?$hAz@iB

    DB:2.84:Logic Behind Deciding Number Of Databases Per Mailbox Server 9m

    Hi,
    If you are building a site resilient environment you might want to have 2 copies of each database in the primary datacenter and one copy of each database in the secondary datacenter. This depends on how many things should be allowed to go wrong before users
    loose connections to their mailbox.
    Leif

  • RELEVANCY SCORE 2.81

    DB:2.81:What Is This Error In Policy Manager? fz



    Hi All,

    Sometimes while clicking on the policy manager, i am getting an below attached error.

    I want to know the reason behind this reason.

    Can anyone explain?

    Thanks.

    DB:2.81:What Is This Error In Policy Manager? fz


    this is mostly due to the browser cache issue.

    Restarting the browser or logging off and reconnecting to the CMS Console should fix this issue.

  • RELEVANCY SCORE 2.80

    DB:2.80:Navigation Controller And Ib zj


    Hi All,

    I have been messing around with the SDK for quite some time now, however am just now seriously getting into writing a real application. I am trying to use IB, however the majority of the referrence material does not discuss how IB should tie in to everything.

    Does anyone know of some good documentation on how to use IB to work with more complex UI elements such as NavigationControllers, Apple's IB tutorial for iPhone is very basic. Specifically I am trying to do a double Navigation Bar, where the top bar can edit or add items to a list, and the second bar navigates through dates, pretty much exactly what the Calendar app does for the single day view.

    Any help would be very appreciated.

    Thanks!

    DB:2.80:Navigation Controller And Ib zj

    Hi All,

    I have been messing around with the SDK for quite some time now, however am just now seriously getting into writing a real application. I am trying to use IB, however the majority of the referrence material does not discuss how IB should tie in to everything.

    Does anyone know of some good documentation on how to use IB to work with more complex UI elements such as NavigationControllers, Apple's IB tutorial for iPhone is very basic. Specifically I am trying to do a double Navigation Bar, where the top bar can edit or add items to a list, and the second bar navigates through dates, pretty much exactly what the Calendar app does for the single day view.

    Any help would be very appreciated.

    Thanks!

  • RELEVANCY SCORE 2.79

    DB:2.79:Failed Importing Document In Webtop p9


    Hi,Below error is getting for me when i am importing a document.Please le me know what is the reason for this problem.ERROR: Failed importing document. Error while performing import operation: Could not check in document '744_GMMS 1014_Statement of Ownership.pdf' [DM_SYSOBJECT_E_CANT_SAVE]error: "Cannot save 744_GMMS 1014_Statement of Ownership.pdf sysobject." [DM_STORAGE_E_NOT_ACCESSIBLE]error: "Storage area filestore_01 is not currently accessible. Reason: errno: 2, message: No such file or directory." Regards,Aditya

    DB:2.79:Failed Importing Document In Webtop p9

    Can you view other documents? If not, then the error message is pretty self-explanatory:"Storage area filestore_01 is not currently accessible."If you filestore is a shared drive (or SAN), verify that the connection is still valid.

  • RELEVANCY SCORE 2.79

    DB:2.79:Why Are My Calculator Readout And Buttons Upside Down??? xk


    With a lot of trouble, I have been trying to decipher the 2002 Garfinkel and Mahoney Cocoa book because of its excellent projects. Needless to say, Apple has made many changes and the book is difficult to follow.

    However, I am making progress, but for some reason my calculator UI is upside down. When I either sim the app in IB or build and run it in Xcode, the calculator readout appears BELOW the keys. When in IB the Calculator window appears normal - readout above the buttons.

    Does anyone know why this is happening??

    I have not tried trashing the Calculator window and beginning afresh, but I may end up having to do this.

    Thanks,
    Phillip Anthony

    DB:2.79:Why Are My Calculator Readout And Buttons Upside Down??? xk

    Yes, using the methodoloy of those days you would write your app, at least a running squeleton from IB while now you are expected to lay down your classes in Xcode first and use them in IB after.
    But it is possible to follow their methodology using the Class tab of the library panel since last version of Xcode.
    you can select nsobject and subclass it to MyController and add it outlets and actions as well. You have to use the little popmenu a the bottom of the panel or the right click of the mouse on your parent class (for subclassing), you can write or add those files to project, you have even the FileMerge tool that starts automaticaly (but is buggy ++).
    has been a good surprise for me
    hth

  • RELEVANCY SCORE 2.79

    DB:2.79:Run-Time 3290 With Creating Table (Ms Access) sz


    Hello,

    I am trying to create a table with VBA within MS Access 2010.
    This the create query/code
    CreateTableSQL = CREATE TABLE sTableName (Element TEXT(255), ElementDescription TEXT(255) , Weight NUMBER, BBSElement TEXT(255), ReportField TEXT(255))

    DoCmd.RunSQL CreateTableSQL, False
    For some reason I keep on getting a 3290 Run-time error.
    PS. sTableName = rpt-bank-aangifte-ib

    Any help is appreaciated
    Rico

  • RELEVANCY SCORE 2.78

    DB:2.78:Adding Navigation Items To View Controllers In Interface Builder - Pwnd Me 17


    I am perplexed by Interface builder. I had SDK version 2.x (can't recall now) and just upgraded to the newest 3.1 and now things do not work the same.

    So that I could have a custom navigation item applied to my view controller, I have followed the instructions here:

    http://developer.apple.com/iphone/library/documentation/DeveloperTools/Conceptua l/IB_UserGuide/EditingNibFileObjects/EditingNibFileObjects.html

    in section entitled "Configuring the Views for Additional Navigation Levels"

    When I try to load the nib at runtime I get this error:

    [* Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: '-[UIViewController _loadViewFromNibNamed:bundle:] loaded the "EventCreate" nib but the view outlet was not set.']

    The view is set on the controller; however, I did not do anything to set the file's owner since the before-mentioned doc does not say anything about that. It seems the view must be set on the file's owner to make it work. This is confusing.

    I've noticed that the nibs I had set up using the previous release (2.x can't remember now) aren't totally supported in the way I had them set up with navigation items. In IB, I would set the File's Owner to by view controller and then I could drop a navigation item in and connect that right away to the controller, and the controller had a navigation item outlet exposed by default. That doesn't appear to work any more. When I open my older nibs (xib files) the navigation item outlet shows up in the inspector for the controller BUT its greyed out, as if obsolete. There's no navigation item outlet showing in IB anymore, it seems when building new xibs. So, I don't know what to do here.

    Can somebody help me?

    DB:2.78:Adding Navigation Items To View Controllers In Interface Builder - Pwnd Me 17

    crouchingchicken wrote:
    I would set the File's Owner to by view controller and then I could drop a navigation item in and connect that right away to the controller
    Yes, I agree. The nav item used to show up as an outlet of any view controller.
    When I try to load the nib at runtime I get this error:
    The problem with the doc is this line:
    To push a new view controller at runtime, _create a new instance of your custom UIViewController subclass, initialize it with the nib_ file you created for it, and push it on the navigation controller stack.
    The underlined portion can lead us to believe we can alloc and initWithNibName:bundle: as we would when File's Owner is a proxy for the controller we create in code. But that won't work in this case, since the controller we want is the one that's created from the view controller object when the nib is loaded. In other words, we don't want to alloc a new controller, we just want to grab the object made from the nib. Here's what to do:

    // RootViewController.m
    - (IBAction)nextView {
    NSLog(@"nextView");
    // SecondViewController *viewController = [[SecondViewController alloc]
    // initWithNibName:@"SecondViewController" bundle:nil];

    NSArray *nib = [[NSBundle mainBundle] loadNibNamed:@"SecondViewController"
    owner:self options:nil];
    NSLog(@"nib=%@", nib);
    SecondViewController *viewController = [nib objectAtIndex:0];

    [self.navigationController pushViewController:viewController animated:YES];
    // [viewController release];
    }

    Be sure not to release the object obtained from the nib, since we didn't alloc it. Top level objects created from a nib are autoreleased. You can put some logging into the second view controller's dealloc to verify it gets dealloced when popped:

    // SecondViewController.m
    - (void)dealloc {
    NSLog(@"dealloc: %@", self);
    [super dealloc];
    }

    - Ray

  • RELEVANCY SCORE 2.78

    DB:2.78:Ora-00600: Internal Error Code, Arguments: [12700], [871767], [3338745801]. j3


    Hello all,

    What is the reason for the oracle error below??

    at or near line number: 0
    SQL return code : -600
    SQL error message :
    ORA-00600: internal error code, arguments: [12700], [871767], [3338745801], [150], [0], [24], [], []

    What is means these argument numbers? Can the problem be related to corrupt index?

    Thanks.

    DB:2.78:Ora-00600: Internal Error Code, Arguments: [12700], [871767], [3338745801]. j3

    Hi..

    ORA-00600: internal error code, arguments: [12700], [871767], [3338745801], [150], [0], [24], [], []As per metalink Doc ID: Note:28229.1

    DESCRIPTION:

    Oracle is trying to access a row using its ROWID, which has been
    obtained from an index.

    A mismatch was found between the index rowid and the data block it is
    pointing to. The rowid points to a non-existent row in the data block.
    The corruption can be in data and/or index blocks.

    ORA-600 [12700] can also be reported due to a consistent read (CR)
    problem.

    HTH
    Anand

  • RELEVANCY SCORE 2.77

    DB:2.77:Xst 2033 Error, Port I Is Connected To Gnd 97


    hi everybody

    I am trying to write my custom ip which is supposed to have a communication with a Analoge to digital converter chip.I am using EDK 12.3. in my user_logic.vhd I have this part of code : port ( -- ADD USER PORTS BELOW THIS LINE ------------------ . . . ADC_CLK_P : in std_logic ; ADC_CLK_N : in std_logic ; . . );and then :begin C1: for I in 0 to 15 generate--FIXME IBUFDS_INS :IBUFDS generic map (DIFF_TERM = TRUE,IOSTANDARD = "LVDS_25") port map (I=ADC_DP(I) , IB=ADC_DN(I) , O = x(I)); end generate;after generating bitstream, the following error happend :/opt/Xilinx/12.3/ISE_DS/ISE/spartan3/data/spartan​3.acdERROR:Xst:2033 - Port I of Input buffer fifo_add_2_0/C1[0].IBUFDS_INS is connected to GNDERROR:Xst:2033 - Port IB of Input buffer fifo_add_2_0/C1[0].IBUFDS_INS is connected to GNDERROR:Xst:2033 - Port I of Input buffer fifo_add_2_0/C1[1].IBUFDS_INS is connected to GNDERROR:Xst:2033 - Port IB of Input buffer fifo_add_2_0/C1[1].IBUFDS_INS is connected to GNDas you see the port I and IB are not connected to GND so why this error happened?I've searched a lot but I do not find any answer.Please help me.thank you in advance







    Solved!
    Go to Solution.

  • RELEVANCY SCORE 2.75

    DB:2.75:What Is The Cause For Fatal Error While Running A Simple Mapping? 9z



    I am using Informatica 9.1 Powercenter Standard edition.

    I am receiving the below error while running a mapping. The mapping is direct pull, used to load data from Netezza table to another Netezza table.

    FATAL ERROR : Signal Received: SIGSEGV (11)

    What would be the reason for the mapping.

    DB:2.75:What Is The Cause For Fatal Error While Running A Simple Mapping? 9z


    Check this once.. It might help u..

    https://community.informatica.com/message/85845#85845

  • RELEVANCY SCORE 2.75

    DB:2.75:Ssl Error zc


    Dear Friends

    Oracle databse 8i under Nt is running smoothly.
    Frontend is 6i.

    Whenever i am running any reports i am geeting the below
    mentioned error.

    Could anybody tell me what would be the reason for that
    error?

    FRM-41211 integration error SSL failure running another
    product.

    Pl most urgent.

    Suresh
    Alok industries Ltd.
    OCP

    DB:2.75:Ssl Error zc

    Make sure reports60_tmp is defined in your registry.

    Verify that the above directory exists and you have permission to write to it and there there is sufficient space.

    Chad

  • RELEVANCY SCORE 2.74

    DB:2.74:Fb60 ma



    Hi,

    In FB60, when i give the account(which is vendor reconciliation account), giving the error below error:

    "Reconciliation account 14533001 or short key 00 is not permitted"

    Message no. F5788

    What could be reason for this?

    Regards,

    DB:2.74:Fb60 ma


    Hi Vidya,

    First of all you need to check the sort key field of g/l and vendor account group.Secondly you can't post a reconciliation account directly.Only g/l accounts which are not reconciliation option can be posted.

    Regards

    Partha

  • RELEVANCY SCORE 2.74

    DB:2.74:Vcenter Error 7p



    When am clicking the performance tab in vcenter server i am getting the below error.

    What would be the reason for this.

    Regards,

    Ramesh.

    DB:2.74:Vcenter Error 7p


    there is a problem with your DB, or performance logging service is stopped . restart the services or vcenter server

  • RELEVANCY SCORE 2.73

    DB:2.73:No Error Text In 500 Internal Server Error s1



    Hi Friends,

    We do not get any error text whenever system is throwing up 500 Internal Server error in portal. Whenever we try to execute any application, it just shows up 500 Internal Server error and below that no specific reason for the error is shown. Can anyone please help us on this? What could be the reason and are there any configurations to be done in Visual Admin?

    Regards,

    Shreya

    DB:2.73:No Error Text In 500 Internal Server Error s1


    Hi,

    Check the link

    Customizing STACK TRACE for XSS Components

    you can enable the stack trace to show in portal.

    Hope this helps.

    Cheers-

    Pramod

  • RELEVANCY SCORE 2.73

    DB:2.73:Order Import - Populate Installation Details 1d


    Hi,
    Can we populate the IB Installation Details screen (IB Transaction) details automatically, while creating an order through order import?
    My requirement is to create an IB Transaction automatically i.e populate CSI_T_TXN_LINE_DETAILS while importing the order.
    I got below records in oe_lines_iface_all
    1. IB_OWNER
    2.ib_location
    3. ib_installation_location.

    However, these do not seem to be creating IB transactions.
    Please advise
    Regds,
    JC

    DB:2.73:Order Import - Populate Installation Details 1d

    You can use API call 'csi_t_txn_details_grp.create_transaction_dtls'

  • RELEVANCY SCORE 2.73

    DB:2.73:How To Setup A Private Connection Btw Ib Switch And A Window Server pk


    We are planning to utilize the existing IB switch inside Exadata and setup the connection with IB card on Widnow 2008 server. It will be a private connection. I know how to get them physically connect, and link status alright. But what are next steps? How do I configure the port and the IB card on the server? Do I need to configure IP's? I have not done so before. Please advice steps and commands? Thank you very much for your help.

    DB:2.73:How To Setup A Private Connection Btw Ib Switch And A Window Server pk

    Hi 943714 -

    The My Oracle Support Community which covers all support related questions about EXADATA is available under: https://communities.oracle.com/portal/server.pt/community/exadata_general/360

    Have you ever visited the Community to exchange, learn, share and get answers to your support related questions?

    The answer to your query is available on the My Oracle Support Community for Exadata:
    https://communities.oracle.com/portal/server.pt?open=514objID=224mode=2threadid=131508aggregatorResults=T57373T131508T124681T152441T139255T301818T145329T200918T211845T223244returnUrl=https%3A%2F%2Fcommunities.oracle.com%2Fportal%2Fserver.pt%2Fcommunity%2Fexadata_general%2F360Portlet=Popular%20DiscussionsPrevPage=Communities-CommunityHome

    If you have not used the My Oracle Support Communities before, please watch this brief (2 minute) video to help you quickly understand the benefits available to you.
    http://bcove.me/rvjqwdn5

    At your service,

    Dave M.

  • RELEVANCY SCORE 2.73

    DB:2.73:Subcontracting Po c7



    Dear All ,

    When i create a subcontracting PO give save it gives the error message Number range IB for object not defined .

    Pls find below the error message Pls suggest me with the solution

    Number range IB for object not defined

    Message no. 06220

    Diagnosis

    The number range IB for the document number you entered has not been defined for purchasing documents.

    Regards,

    Suresh.R

    DB:2.73:Subcontracting Po c7


    IB is for Physical Inventory Document maintain physical inventory doc num range in IMG. System prompting error as you may have activated phy inv for the component items.

  • RELEVANCY SCORE 2.72

    DB:2.72:Xeon Phi + Ofed Questions 8p



    Hello,

    By some reason, kernel modules, built from intel-mic-ofed-kmod source package, don't want to load on CentOS 6.3, for example:

    [root@node001 ~]# modprobe ib_umad
    FATAL: Error inserting ib_umad (/lib/modules/2.6.32-279.22.1.el6.x86_64/updates/drivers/infiniband/core/ib_umad.ko): Unknown symbol in module, or unknown parameter (see dmesg)

    It seems CentOS 6.3 and intel-mic-ofed-kmod sources are not compatible (or I am doing something wrong). We are using the latest publicly available MPSS stack (Update 1) and we build intel-mic-ofed-* packages on boot. So, could you please answer (or point me to the correct documentation) the following two questions:

    There are at least 3 widly used OFED versions: OFA OFED, Mellanox OFED and QLogic OFED. What exact MPSS versions work with what  OFED versions on what linux distrubutions? I suspect the correct answer changes all the time quickly, but I will be highly approtiated if somebody provides us with at least the current state.
    As far as I understand, the main reason to set up OFED on a host is to emulate HCA and allow ib-wise applications to communicate between the host and the card via "infiniband" (using rdma). Is it possible to use several MICs (installed on *different* hosts phisicaly connected to ib-switch) to get all advantages of ib communication between them? For example, it would be nice to run a mvapich2 native application on several MICs (on different hosts) in a cluster using ib only (Probably HCA emulation makes ib communication slower, but I am not sure).

    DB:2.72:Xeon Phi + Ofed Questions 8p


    Hi Christian,

    I'm trying to find a more definitive answer of you. Since things are relatively quiet around here due to the US holiday, you probably won't receive an answer until the later half of next week.

    Regards

    --

    Taylor

     

  • RELEVANCY SCORE 2.72

    DB:2.72:Unable To Open Esr Ib kz



    Hi All.

    In our PI7.31 dual stack systems, we are unable to open the ESR and IB of the systems.Below is the error::

    Cannot connect to server using message server: ms://nxxxxxxxx.nxxxxxx.co.xx:8101/P4 See error logs for details

    I have added the FQDN in hosts file .I have checked the rmi ports too in exchange profile.Further, i followed the below link for troubleshooting

    http://scn.sap.com/community/pi-and-soa-middleware/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support

    But still issue persists

    Let me know if anyone can give solution and let me where to see the exact error logs (is it default trace....?) .!!!!!

    Regards

    Ram

    DB:2.72:Unable To Open Esr Ib kz


    Hi All.

    In our PI7.31 dual stack systems, we are unable to open the ESR and IB of the systems.Below is the error::

    Cannot connect to server using message server: ms://nxxxxxxxx.nxxxxxx.co.xx:8101/P4 See error logs for details

    I have added the FQDN in hosts file .I have checked the rmi ports too in exchange profile.Further, i followed the below link for troubleshooting

    http://scn.sap.com/community/pi-and-soa-middleware/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support

    But still issue persists

    Let me know if anyone can give solution and let me where to see the exact error logs (is it default trace....?) .!!!!!

    Regards

    Ram

  • RELEVANCY SCORE 2.71

    DB:2.71:May I Know What Is The Reason For Getting Error Message Error 1920 When Am Installing License Server. ka


    may i know what is the reason for getting error message error 1920 when am installing license server.

  • RELEVANCY SCORE 2.71

    DB:2.71:[Iphone] This Class Is Not Key Value Coding-Compliant For The Key View xp


    I hope somebody can help me, I'm totally lost on this:

    I've used IB to create a simple and basic view. I've set the File's Owner Identity to my ViewControllers class. My ViewController subclasses UIViewController. I've connected File's Owner view to the View created with IB.

    When I launch the application crashes with:

    * Terminating app due to uncaught exception 'NSUnknownKeyException', reason: '[UIApplication 0x44a000 setValue:forUndefinedKey:]: this class is not key value coding-compliant for the key view.'

    I believe what this means is that the class (my ViewController) has no property for "view", so when the IB create view awakes it cannot connect to the ViewController's view property.

    If I delete the connection from the actual View to File's Onwer view I don't get the exception. However, I do need programmatic access to the View.

    Can anybody help? I don't know what else I could have forgotten. As far as I know I don't have to synthesize the view property or anything, I don't even have to create an IBOutlet as all of that is inherited from UIViewController.

    Please help.

  • RELEVANCY SCORE 2.70

    DB:2.70:Ib --Domain 11


    In IB-Configuration-Quick Configuration-IB Domains

    I see the app server name and application server path is wrong. I want to change it to

    different app server name.

    Plz let me know the steps and what is the signifiance of it.

    DB:2.70:Ib --Domain 11

    Are the Pub/Sub processes enabled on the application server domain?
    Did you supply the new application server domain as the default gateway application server?
    See this picture
    http://docs.oracle.com/cd/E28394_01/pt852pbh1/eng/psbooks/tiba/img/sm_PeopleSoftNodeConfigurationPage7fb6_tiba7fe1.png
    For more information on this subject see PeopleBooks
    PeopleBooks PeopleTools 8.52: PeopleSoft Integration Broker Administration Managing Integration Gateways Setting Oracle Jolt Connection Properties

  • RELEVANCY SCORE 2.70

    DB:2.70:Error During Stor/Appe Epilogue: Com aa



    Hi Experts,

    Getting below error for FTP channel frequently.

    java.lang.IllegalStateException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Transfer failed.

    After sometimes the message automatically get processed.

    Checked we got this error for 2 channels simultaneously for same host and port but different folder.

    But messages got processed latter.

    This issue is occurring frequently. Can anybody suggest what is the reason and what is the permanent solution for this error.

    DB:2.70:Error During Stor/Appe Epilogue: Com aa


    Hi,

    I think destination server is full so CC can't write file on server.

    Fabio

  • RELEVANCY SCORE 2.70

    DB:2.70:Is Hp-Ib The Same As Gp-Ib? 9m


    we need to replace our old isa hp-ib cards for controlling Hewlet Packard Gas chromatographs 5890 and Mass Spectometers 5971 2

    DB:2.70:Is Hp-Ib The Same As Gp-Ib? 9m

    I have just been attempting (today) to pgm the 8903 as well (in VB6/xp). As this device is very old and predates the GPIB standard it does not use any ? commands that I can tell. I have got to the stage of being able to issue cmds to the unit (change ranges etc) and reading measurements (using cmd "M1" for read mV) The device seems to use an odd EOT/EOS terminator (im getting 2 sets of readings in the results string), times out before returning to the host (EOT again?) needs pauses etc, but it does sort of work!Im using the NI vb code for the fluke mm example as the basis for my test pgm, changing parameters as necesary. Hope this helps.Clive

  • RELEVANCY SCORE 2.69

    DB:2.69:Cdr-03100 sc


    what is the reason for this error

    CDR-03100: Diff/Merge internal error: java.lang.NullPointerException

    DB:2.69:Cdr-03100 sc

    I am getting the same error message when I do a Compare previous version of any object or container in Oracle Designer.

    CDR-03100: Diff/Merge internal error: java.lang.NumberFormatException: For input string: "-4137792"

    I have installed the full IDS then the latest patch version 10.1.2.5.

    Does anyone know what is happening here?

  • RELEVANCY SCORE 2.69

    DB:2.69:Error Xst 2033 7s



    hi everybody

    I am trying to write my custom ip which is supposed to have a communication with a Analoge to digital converter chip.I am using EDK 12.3. in my user_logic.vhd I have this part of code : port ( -- ADD USER PORTS BELOW THIS LINE ------------------ . . . ADC_CLK_P : in std_logic ; ADC_CLK_N : in std_logic ; . . );and then :begin C1: for I in 0 to 15 generate--FIXME IBUFDS_INS :IBUFDS generic map (DIFF_TERM = TRUE,IOSTANDARD = "LVDS_25") port map (I=ADC_DP(I) , IB=ADC_DN(I) , O = x(I)); end generate;after generating bitstream, the following error happend :/opt/Xilinx/12.3/ISE_DS/ISE/spartan3/data/spartan​3.acdERROR:Xst:2033 - Port I of Input buffer fifo_add_2_0/C1[0].IBUFDS_INS is connected to GNDERROR:Xst:2033 - Port IB of Input buffer fifo_add_2_0/C1[0].IBUFDS_INS is connected to GNDERROR:Xst:2033 - Port I of Input buffer fifo_add_2_0/C1[1].IBUFDS_INS is connected to GNDERROR:Xst:2033 - Port IB of Input buffer fifo_add_2_0/C1[1].IBUFDS_INS is connected to GNDas you see the port I and IB are not connected to GND so why this error happened?I've searched a lot but I do not find any answer.Please help me.thank you in advance

    DB:2.69:Error Xst 2033 7s


    Can you mention which ISE version are you using. alternatively is sugget youfollow these steps to work around this issue:

    1. Create a black box NGC file to instantiate in your design. The following is a module that instantiates only the IOBUFDS (this is a Verilog example; refer to the ISE Language Templates for a VHDL example):

    module diff_iobuf (T, I, IO, IOB, O);

    input T;

    input I;

    inout IO;

    inout IOB;

    output O;

    IOBUFDS lvds_ibufg_crystal

    (.IO(IO), .IOB(IOB), .I(I), .O(O), .T(T));

    endmodule

    2. Synthesize this module and deselect the XST option to insert I/O buffers (see the XST User Guide or ISE Help for more information on this process).

    3. Place the NGC file in NGDBuild's "macro search path" (see the ISE Help for more information on this process).

    NOTE: It is important that XST does not have access to this NGC file (named diff_iobuf) because it can still cause the same problems.

    4. Instead of instantiating IOBUFDS, you must instantiate diff_iobuf.

  • RELEVANCY SCORE 2.68

    DB:2.68:Bufg Following An Ibufgds In Virtex5 8x



    Hello,

    In my design I'm connecting to a TS201 DSP which uses differential links for fast communication with external devices, in this cas a Virtex5 FPGA. It is a source-synchronous design, so the DSP provides the clock (differential) and four differential data lines.

    I'm instantiating an IBUFGDS for the clock and IBUFDS for the data lines. However, I get a lot of timing violations because instead of using the IBUFGDS output to drive the logic, the synthesis tool adds a BUFG to this net. This makes the clock signal go all the way from the pins to the middle of the FPGA and back, which introduces a lot of delay.

    Is there any way to disable the BUFG inferrence or some other solution to this problem?

    Below is the code I'm using:

    datain0buf : ibufds generic map (IOSTANDARD = "LVDS_25") port map (i = pi_datap(0), iB = pi_datan(0), o = s_dsp_datain(0) ) ;datain1buf : ibufds generic map (IOSTANDARD = "LVDS_25") port map (i = pi_datap(1), iB = pi_datan(1), o = s_dsp_datain(1) ) ;datain2buf : ibufds generic map (IOSTANDARD = "LVDS_25") port map (i = pi_datap(2), iB = pi_datan(2), o = s_dsp_datain(2) ) ;datain3buf : ibufds generic map (IOSTANDARD = "LVDS_25") port map (i = pi_datap(3), iB = pi_datan(3), o = s_dsp_datain(3) ) ;clkbuf : ibufgds generic map (IOSTANDARD = "LVDS_25") port map (i = pi_clkp, iB = pi_clkn, o = s_dsp_clk_single);




    ---Paweł PrędkiTechnical University of Lodz

    DB:2.68:Bufg Following An Ibufgds In Virtex5 8x

    As far as the data is concerned I'm only using the IBUFDS in the IO block. Then, I register it in the fabric logic using a simple memory (4-bit wide, 4-word deep) in a way I described in one of my previous posts. I use the clock from the DSP as the write clock to the memory and a different, internal clock to read from the memory. I only start reading when at least two nibbles are in the memory.

    You are making this moch more complex than needed. You have instantiated two memories, one is written (clocked) on the pos edge of the DSP clock and the other is written (clocked) on the neg edge of the DSP clock. This is precisely the problem which the IDDR block is intended to simplify.

    In the IDDR block, the DDR DSP data is sampled on both edges of the (half-rate) DSP clock.
    Both sampled (200MHz) DDR bits are output as (100MHz) SDR from the IDDR block, aligned to the pos edge of the DSP clock.
    A single memory written (clocked) on the pos edge of the DSP clock can buffer the two words of DSP data.

    This is done because the phase alignment of the DSP clock and the internal clock are unknown.

    The memory (FIFO) handles the clock domain crossing from DSP clock to internal clock, whether or not you use IDDR.

    If I use IDDR then I get some outputs

    Yes.

    but I still need to translate this data into a different clock domain

    Yes, no difference between using IDDR or not using IDDR.

    and now I don't have any way of buffering it because the original clock edges are limited.

    I don't understand your meaning 'original clock edges are limited'. You still use the memory buffer, but now you need only one buffer (written on one edge of DSP clock) instead of two different buffers (written on different edges of DSP clock).

    If I don't buffer it it's possible that I violate the IDDR setup/hold timings by trying to move the data further with my internal clock.

    With IDDR design you should still use the buffer. The internal clock is still used for reading data from the buffer memory (FIFO), and the DSP clock is still used to write DSP data into the buffer memory (FIFO).

    I'm not sure if what I wrote was clear but I don't think IDDR is the way to go in this design.

    Designer's choice. Timing margins will be better if you use the IDDR blocks in the IO logic, because the timing relationship between DSP data and DSP clock has less skew, less uncertainty in the interconnect delays to the IDDR registers (compared to interconnect to the fabric memory buffer).

    Using IDDR block to de-multiplex DDR data to SDR data, the fabric memory buffer is written with 100MHz (DSP) clock, with data which has been re-clocked (in IDDR) with a 100MHz (DSP) clock. Data period into the memory buffer is 10nS instead of 5nS.

    Compare this to your current design, where the fabric memory buffer is written with a 100MHz clock, with data which is clocked in the DSP (but not in the FPGA) at 200MHz. The data period is 5nS instead of 10nS.

    Does this make sense? Do you see the timing margin differences between the two implementations?

    -- Bob Elkind




    SIGNATURE:README for newbies is here: http://forums.xilinx.com/t5/New-Users-Forum/README-first-Help-for-new-users/td-p/219369Summary:1. Read the manual or user guide. Have you read the manual? Can you find the manual?2. Search the forums (and search the web) for similar topics.3. Do not post the same question on multiple forums.4. Do not post a new topic or question on someone else's thread, start a new thread!5. Students: Copying code is not the same as learning to design.6 "It does not work" is not a question which can be answered. Provide useful details (with webpage, datasheet links, please).7. You are not charged extra fees for comments in your code.8. I am not paid for forum posts. If I write a good post, then I have been good for nothing.

  • RELEVANCY SCORE 2.68

    DB:2.68:Activex Component Can't Create Object: 'Outlook.Application' jj



    Hi,

    Can anyone please tell me what is the reason for getting an error below

  • RELEVANCY SCORE 2.67

    DB:2.67:Error While Deploying Msi Package -- Insufficient Memory 97


    Hi,
    While importing the MSI package I am getting below error:

    What is the reason for this error?

    Thanks, Girish R. Patil.

    DB:2.67:Error While Deploying Msi Package -- Insufficient Memory 97

    Hi,
    The issue got resolved after sometime automatically. I restarted the host instances, but not sure if that helped or not.
    But I still can see lots of warnings for VMwareTool. Please see below screenshot:

    Thanks, Girish R. Patil.

  • RELEVANCY SCORE 2.67

    DB:2.67:Email Collaboration Eoawemc Abended 9a


    We're trying to use the email collaboration functionality for AWE. We have done some config in the IB setup but when we run the delivered EOAWEMC process, we get the error below. Not sure if this is a config issue, any input will be appreciated. We are on PS FSCM 9.2, PTools 8.53.06.PSAESRV started service request at 09.20.21 2014-06-09Invalid language code for this email (162,1604)Process 30610 ABENDED at Step EOAWEMC.MAIN.Run (PeopleCode) -- RC = 20 (108,524)Process %s ABENDED at Step %s.%s.%s (Action %s) -- RC = %sPSAESRV completed service request at 09.21.23 2014-06-09

    DB:2.67:Email Collaboration Eoawemc Abended 9a

    We're trying to use the email collaboration functionality for AWE. We have done some config in the IB setup but when we run the delivered EOAWEMC process, we get the error below. Not sure if this is a config issue, any input will be appreciated. We are on PS FSCM 9.2, PTools 8.53.06.PSAESRV started service request at 09.20.21 2014-06-09Invalid language code for this email (162,1604)Process 30610 ABENDED at Step EOAWEMC.MAIN.Run (PeopleCode) -- RC = 20 (108,524)Process %s ABENDED at Step %s.%s.%s (Action %s) -- RC = %sPSAESRV completed service request at 09.21.23 2014-06-09

  • RELEVANCY SCORE 2.67

    DB:2.67:Rds/Ib- Error While Starting Database 11


    hello all

    i am trying to set up RAC database with RDS/IB. i am doing it on HP-UX. i am some issues when i try to start the database. i have my CRS HB RAC cache fusion and service guard HB on the same interconnect. when i try to start the database with out any stand by configured database is starting up fine. but when i configure a stand by lan when i am trying to start the database i am hitting the below error.

    SQL startup ;
    ORA-27504: IPC error creating OSD context
    ORA-27300: OS system dependent operation:bind failed with status: 22
    ORA-27301: OS failure message: Invalid argument
    ORA-27302: failure occurred at: sskgxpcre3
    ORA-27303: additional information: ip 127.0.0.1
    SQL

    any pointer how to solve it or any documents which speaks about RDS/IB configuration on HP-UX?

    DB:2.67:Rds/Ib- Error While Starting Database 11

    hello franken

    thanks for the reply. i have found that link earlier and tried tuning kernel paramters. it did not help much.

  • RELEVANCY SCORE 2.67

    DB:2.67:Error On Clicking Layout Tab : Dp_Error_Get_Data xj



    Dear All,

    I am new to interactive forms . When Ib click on Layout/b , I get a dump -

    ----

    Exception condition "bDP_ERROR_GET_DATA/b" raised.

    A RAISE statement in the program "SAPLCNDP" raised the exception condition "DP_ERROR_GET_DATA". Since the exception was not intercepted by a superior program, processing was terminated.

    ----

    Please tell what could be the possible reason for the same . This is happening to bany form I take/b . I took the example given : FP_EXAMPLE_01. Also , when i was creating a simple test case , it gave the same dump.

    Regards,

    Shweta

    Message was edited by:

    shweta soni

    DB:2.67:Error On Clicking Layout Tab : Dp_Error_Get_Data xj


    Dear All,

    I am new to interactive forms . When Ib click on Layout/b , I get a dump -

    ----

    Exception condition "bDP_ERROR_GET_DATA/b" raised.

    A RAISE statement in the program "SAPLCNDP" raised the exception condition "DP_ERROR_GET_DATA". Since the exception was not intercepted by a superior program, processing was terminated.

    ----

    Please tell what could be the possible reason for the same . This is happening to bany form I take/b . I took the example given : FP_EXAMPLE_01. Also , when i was creating a simple test case , it gave the same dump.

    Regards,

    Shweta

    Message was edited by:

    shweta soni

  • RELEVANCY SCORE 2.66

    DB:2.66:Ib Wsdl Issue j8


    Hi,

    My scenario is when ever new hire transaction happend at third party system it should get update in PS. So I was trying to expose PeopleSoft web services (not CI based webservice) to a 3rd party application. I generated a WSDL URL. But when i try to view the generated WSDL in a browser using the same URL, i get below IB response error message.

    SOAP-ENV:Envelope
    SOAP-ENV:Body
    SOAP-ENV:Fault

    faultcodeSOAP-ENV:Server/faultcode
    faultstringnull/faultstring

    detail
    IBResponse type="error"
    DefaultTitleIntegration Broker Response/DefaultTitle
    StatusCode20/StatusCode

    MessageID55/MessageID
    DefaultMessageUserName not defined in database. (158,55)/DefaultMessage
    MessageParameters
    ParameterPSADMIN/Parameter
    /MessageParameters

    /IBResponse
    /detail
    /SOAP-ENV:Fault
    /SOAP-ENV:Body
    /SOAP-ENV:Envelope

    1. I can ping Gateway to success.
    2. Gateway propeties are fine
    3. Target Location in Service COnfiguration is fine
    4. I am using only one node that is local node. I can ping local node to success.
    Where we use single signon concept in IB.
    5. Verified IB_UTILITY service, all service operations under it are active.
    6. Even I tried to change default userid from PSADMIN to PS for ANONYMOUS WSDL_NODE nodes, even though I am getting PSADMIN user not found in database.

    Please help me out.

    Thanks in advance.

    Regards,
    Praveen

    DB:2.66:Ib Wsdl Issue j8

    Were you able to resolve this error?

  • RELEVANCY SCORE 2.66

    DB:2.66:Lvds Problem cp



    Hello,

    Since i'm new with working with LVDS i explored the net for an example.

    Still i have troubles with synthse.

    What i want is simple. I have LVDS input's and output's that i want to connect to each other.

    I keep getting "unexpected identifier" on the second signal declaration.

    I'm sure it's something with the synthese, but i can't find what.

    I hope someone can help me out on this one.

    entity IO is Port ( INPUT_p : in STD_LOGIC_VECTOR (15 downto 0); INPUT_n : in STD_LOGIC_VECTOR (15 downto 0); OUTPUT_p : out STD_LOGIC_VECTOR (15 downto 0); OUTPUT_n : out STD_LOGIC_VECTOR (15 downto 0); XORO_p : out STD_LOGIC; XORO_n : out STD_LOGIC; CLKIN_p : in STD_LOGIC; CLKIN_n : in STD_LOGIC; CLKOUT_p : out STD_LOGIC; CLKOUT_n : out STD_LOGIC);end IO;architecture Behavioral of IO issignal input : std_logic_vector (15 downto 0); output : std_logic_vector (15 downto 0); xoro : std_logic; clkin: std_logic; clkout: std_logic;beginu1 : OBUFDS port map( O = OUTPUT, -- Buffer output I = OUTPUT_p, IB = OUTPUT_n); u2 : OBUFDS port map( O = XORO, -- Buffer output I = XORO_p, IB = XORO_n); u3 : OBUFDS port map( O = CLKOUT, -- Buffer output I = OUTPUT_p, IB = OUTPUT_n); u4 : OBUFDS port map( O = OUTPUT, -- Buffer output I = OUTPUT_p, IB = OUTPUT_n); u5 : IBUFDS port map( O = CLKIN, -- Buffer output I = CLKIN_p, IB = CLKIN_n); u6 : IBUFDS port map( O = INPUT, -- Buffer output I = INPUT_p, IB = INPUT_n);--end behavioral; --beginprocess (CLKIN)begin if (CLKIN'event and CLKIN = '1') then OUTPUT=INPUT; CLKOUT=CLKIN; end if;end process;end Behavioral;

    DB:2.66:Lvds Problem cp


    -- LVDS input buffer component IBUFDS is generic ( DIFF_TERM: boolean; IOSTANDARD: string ); port ( I: in std_logic; IB: in std_logic; O: out std_logic ); end component; -- LVDS clock input buffer component IBUFGDS is generic ( DIFF_TERM : boolean; IOSTANDARD: string ); port ( I: in std_logic; IB: in std_logic; O: out std_logic ); end component; -- LVDS output buffer component OBUFDS is port ( I: in std_logic; O: out std_logic; OB: out std_logic ); end component;

    DIFF_TERM = TRUE, IOSTANDARD = "LVDS_25"

  • RELEVANCY SCORE 2.66

    DB:2.66:Cloning Dbtier 3z


    Am clonning a databaseTier IBM-AIX 64bit am getting the below error when configuring
    the target system

    $perl adcfgclone.pl dbTier

    Enter the APPS password [APPS]:apps

    ERROR : Unable to set CLASSPATH

    /oramot/9.2.0/appsutil/clone/bin/../jl ib/classes111.zip: is missing
    First Creating a new context file for the cloned system.
    context creation not completed successfully.Please check /tmp/adcfgclone.err file for errors
    can anyone help me how to solve it?

    DB:2.66:Cloning Dbtier 3z

    Hi,

    Please see if (Note: 374534.1 - Adcfgclone.Pl Dbtier fails with : ''Unable To Set Classpath'' Jars Missing) helps.

    Regards,
    Hussein

  • RELEVANCY SCORE 2.66

    DB:2.66:Stored Procedure Time Out j1


    Hi
    I am executing a CLR stored procedure which call a web service . The web service in turn pull data from DB2 running on IBM Marinframe . The stored procedure successfully worked for couple of times . But now the stored provedure is failing with
    the below error. What could be causing this issue ?
    Error Message
    ERROR [HY008] [IB
    M][CLI Driver][DB2] SQL0952N Processing was cancelled due to an
    interrupt. SQLSTATE=57014

    DB:2.66:Stored Procedure Time Out j1

    Thanks.. I incereased the timeout intervel and it worked

  • RELEVANCY SCORE 2.65

    DB:2.65:Mq 2016 ms


    we are receiveing below exception while using MQ thru BEA weblogic JMS foerign servers, Pls let me know what could be the reason for this. A pooled JMS connection is being closed because an error was detected on the connection: javax.jms.JMSException: MQJMS2002: failed to get message from MQ queue. Linked exception: com.ibm.mq.MQException: MQJE001: Completion Code 2, Reason 2016

    DB:2.65:Mq 2016 ms

    we are receiveing below exception while using MQ thru BEA weblogic JMS foerign servers, Pls let me know what could be the reason for this. A pooled JMS connection is being closed because an error was detected on the connection: javax.jms.JMSException: MQJMS2002: failed to get message from MQ queue. Linked exception: com.ibm.mq.MQException: MQJE001: Completion Code 2, Reason 2016

  • RELEVANCY SCORE 2.65

    DB:2.65:Route Error (471) dp



    Hi all,

    I'm using Virtex 5 Lx330for my project.

    During the PR process, I met an error message:

    ERROR:Route:471 - This design is unrouteable. Router will not continue. To evaluate the problem please use fpga_editor. The nets listed below can not be routed:Unrouteable Net:g0_i_m2_0_cy/O

    I was using ISE 10.1 previously and from http://www.xilinx.com/support/answers/31623.htm#, I've updated my ISE to SP3 and rerun it. However, the error is still there.

    Then, I used FPGA editor toopen the mapped .ncd file and usethe auto route function to route this unrouteable net (i.e. g0_i_m2_0_cy/O). The FPGA editor also gives an error below:

    ERROR:FPGAEditor:457 - Failed to route the following:

    net g0_i_m2_0_cy/O

    pin mmtv_amba/mmtv_core/mmtv_fe/mcu_core/mcu/fe/ici/ib​pc_inc[8].CIN onnet g0_i_m2_0_cy/O

    Could anyone tell me how to work around for this error. Thanks.

    Regards,

    CH

    DB:2.65:Route Error (471) dp


    Hi all,

    I'm using Virtex 5 Lx330for my project.

    During the PR process, I met an error message:

    ERROR:Route:471 - This design is unrouteable. Router will not continue. To evaluate the problem please use fpga_editor. The nets listed below can not be routed:Unrouteable Net:g0_i_m2_0_cy/O

    I was using ISE 10.1 previously and from http://www.xilinx.com/support/answers/31623.htm#, I've updated my ISE to SP3 and rerun it. However, the error is still there.

    Then, I used FPGA editor toopen the mapped .ncd file and usethe auto route function to route this unrouteable net (i.e. g0_i_m2_0_cy/O). The FPGA editor also gives an error below:

    ERROR:FPGAEditor:457 - Failed to route the following:

    net g0_i_m2_0_cy/O

    pin mmtv_amba/mmtv_core/mmtv_fe/mcu_core/mcu/fe/ici/ib​pc_inc[8].CIN onnet g0_i_m2_0_cy/O

    Could anyone tell me how to work around for this error. Thanks.

    Regards,

    CH

  • RELEVANCY SCORE 2.65

    DB:2.65:Reusing Ib Created Uitableviewcells 7z


    Hi,

    I have created an UITableViewCell in IB which contains two UILabels. In the controller I have created Outlets for the cell as well as the labels. Now I want to reuse this cell within the table view (see code below). Unfortunatly it does not work as expected. The cell appears only once and two empty cells above it. What's wrong with my code? I guess I missunderstand the dequeueing mechanism.
    Does anyone have a hint?

    Best regards,
    Michael

    * Code *
    - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath {
    UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:@"xxx"];

    if(cell == nil) {
    cell = myCell // myCell is an Outlet - connected in IB
    }

    // label1 and label2 are also Outlets
    label1.text = [NSString stringWithFormat:@"%d", indexPath.row];
    label2.text = [NSString stringWithFormat:@"%d", indexPath.section];

    return cell;
    }

    DB:2.65:Reusing Ib Created Uitableviewcells 7z

    !) I forgot to mention the IBOutlet:
    IBOutlet UITableViewCell *cellFactory;

    and setting the Files Owner's class to the class that is the UITableView datasource.

    2) Set tags for each UILabel in IB, in ths example I set the tags as 1 2:
    ((UILabel *)[cell viewWithTag:1]).text = string1;
    ((UILabel *)[cell viewWithTag:2]).text = string2;

  • RELEVANCY SCORE 2.65

    DB:2.65:Error 6158 - Structure Name Is Invalid Or Missing 3m



    Hello, I receive the following errors when I try to compile:

    aerodyn.f90(1327): error #6158: The structure-name is invalid or is missing. [AD_INIT]
    call mxcopyreal8toptr700(AD_Init%Blade(1,1)%Position(1),ADB111_ptr,size1)
    ----------------------------^
    aerodyn.f90(1328): error #6158: The structure-name is invalid or is missing. [AD_INIT]
    call mxcopyreal8toptr700(AD_Init%Blade(1,1)%Position(2),ADB112_ptr,size1)
    -----------------------------^

    !!!!!!The values I'm trying to get are calculated by the following code:

    AD_Init%Blade(:,:)%Position(1) = 0.0
    AD_Init%Blade(:,:)%Position(2) = 0.0

    DO IB = 1, NB
    AD_Init%Blade(:,IB)%Position(3) = RElm(:) - HubRadius
    END DO

    ! RELATIVE ORIENTATION OF BLADE ELEMENTS

    DO IB = 1,NB
    AD_Init%Blade(:,IB)%Orientation(1,1) = COS( TWIST(:) )
    AD_Init%Blade(:,IB)%Orientation(2,1) = SIN( TWIST(:) )
    AD_Init%Blade(:,IB)%Orientation(3,1) = 0.0

    AD_Init%Blade(:,IB)%Orientation(1,2) = -1.*AD_Init%Blade(:,IB)%Orientation(2,1)
    AD_Init%Blade(:,IB)%Orientation(2,2) = AD_Init%Blade(:,IB)%Orientation(1,1)
    AD_Init%Blade(:,IB)%Orientation(3,2) = 0.0

    AD_Init%Blade(:,IB)%Orientation(1,3) = 0.0
    AD_Init%Blade(:,IB)%Orientation(2,3) = 0.0
    AD_Init%Blade(:,IB)%Orientation(3,3) = 1.0
    END DO

    AD_Init is a function that is TYPE(AllAeroMarkers) that contains the position and orientation subcomponents.
    It seems that maybe I should change the AD_Init in the calculation part of the code to what the answer will be such as ADMarkers that is also type(AllAeroMarkers) but I'm not sure.

    DB:2.65:Error 6158 - Structure Name Is Invalid Or Missing 3m


    AD_Init is a function...

    If so, is it a function that takes zero arguments?

    It is not clear because, as Steve already pointed out, you did not show the type declaration statements.

  • RELEVANCY SCORE 2.65

    DB:2.65:Interface Builder ( Ib ) And Calayer Support [Iphone Sdk] cf


    Why does IB not have the library items for CALayers?
    Im trying to find how to add a custom object to my palette, but it seems this is for custom code..

    maybe if i can find the IB library folder that has the UIView stuff (nib) that interface builder uses i can copy and modify it and create an item for a CALayer.

    DB:2.65:Interface Builder ( Ib ) And Calayer Support [Iphone Sdk] cf

    Why does IB not have the library items for CALayers?
    Im trying to find how to add a custom object to my palette, but it seems this is for custom code..

    maybe if i can find the IB library folder that has the UIView stuff (nib) that interface builder uses i can copy and modify it and create an item for a CALayer.

  • RELEVANCY SCORE 2.64

    DB:2.64:Best Practice For Applying Patches In Wl 8.1 ja


    Below is what I did to apply patches to WL 8.1 SP2. Is there a better way?
    Best Practice? Thanks in advance.

    1) Created directory.
    C:\bea\weblogic81\server\lib\patches

    2) Copied jar files to patches directory.
    CR127930_81sp2.jar
    CR124746_81sp2.jar

    3) Modified startWebLogic.cmd to include jar files first in the classpath.
    set
    CLASSPATH=%WL_HOME%\server\lib\patches\CR124746_81sp2.jar;%WL_HOME%\server\l
    ib\patches\CR127930_81sp2.jar;%WEBLOGIC_CLASSPATH%;%POINTBASE_CLASSPATH%;%JA
    VA_HOME%\jre\lib\rt.jar;%WL_HOME%\server\lib\webservices.jar;%CLASSPATH%

    4) Restarted server and saw in console that the patches were applied.

    DB:2.64:Best Practice For Applying Patches In Wl 8.1 ja

    Below is what I did to apply patches to WL 8.1 SP2. Is there a better way?
    Best Practice? Thanks in advance.

    1) Created directory.
    C:\bea\weblogic81\server\lib\patches

    2) Copied jar files to patches directory.
    CR127930_81sp2.jar
    CR124746_81sp2.jar

    3) Modified startWebLogic.cmd to include jar files first in the classpath.
    set
    CLASSPATH=%WL_HOME%\server\lib\patches\CR124746_81sp2.jar;%WL_HOME%\server\l
    ib\patches\CR127930_81sp2.jar;%WEBLOGIC_CLASSPATH%;%POINTBASE_CLASSPATH%;%JA
    VA_HOME%\jre\lib\rt.jar;%WL_HOME%\server\lib\webservices.jar;%CLASSPATH%

    4) Restarted server and saw in console that the patches were applied.

  • RELEVANCY SCORE 2.64

    DB:2.64:Sharepoint 2010 Error sx


    When ever we check out a single file in sharepoint 2010 for what ever reason we immediately see an error message as below (this has only occuring for a few weeks and is not user specific) :-
    Error
    The file file location and nameis checked out for editing by ***\jandrews.

    DB:2.64:Sharepoint 2010 Error sx

    Try to check it in with Manage Content and Structure. see this link:
    http://www.heathersolomon.com/blog/archive/2006/11/29/5950.aspx
    Also see if any of these help:
    http://social.technet.microsoft.com/Forums/en/sharepointadmin/thread/7966c35d-b815-4951-8374-d64840ccf16c
    Independant SharePoint Consultant. Feel free to contact me. Blog:
    http://www.sharepoint.bg/radi Twitter:
    @RadiAtanassov

  • RELEVANCY SCORE 2.64

    DB:2.64:Re: Ib Update_Item_Instance Error - Doesn't Allow Active_Start_Date To Change 1x


    Nagmohan

    Thanks. The reason is dates are wrong when we did the initial conversion, causing users to think IB records are new but some are very old.

    Assuming we need to update directly, do we need to insert into history table ? also into any other tables ? I see that when I use API to update install date it inserts a new records into history table.

    Also, what is the use of p_txn_rec when passing to API ? does these id, date, corresponds to some columns in IB tables ?

    p_txn_rec.transaction_id := FND_API.G_MISS_NUM;
    p_txn_rec.transaction_date := SYSDATE;
    p_txn_rec.source_transaction_date := SYSDATE;
    p_txn_rec.transaction_type_id := 1;

    Thanks

    DB:2.64:Re: Ib Update_Item_Instance Error - Doesn't Allow Active_Start_Date To Change 1x

    Nagmohan,

    One more follow-up question on this.

    I noticed some of the following tables are related to csi_item_instances, for example, parties, accounts, and therir history tables.

    csi_item_instances_h
    csi_transactions
    csi_i_parties, csi_i_parties_h
    csi_ip_accounts, csi_ip_accounts_h
    csi_ii_relationships, csi_ii_relationships_h
    csi_iea_values, csi_iea_values_h
    csi_i_extended_attribs
    csi_i_org_assignments, csi_i_org_assignments_h
    csi_i_version_labels, csi_i_version_labels_h

    Do you think to worry about these associated tables in anyway ? or if not what's the impact ? or just updating active_start_date alone would be sufficient?

    Thanks much

  • RELEVANCY SCORE 2.64

    DB:2.64:Iphone Interface Builder Plug-In xf


    Is there a way to create IB plugins specifially designed for the iPhone?

    DB:2.64:Iphone Interface Builder Plug-In xf

    Blaze, you're usually right on target, but you missed the mark on this one. He's talking about adding custom palettes to Interface Builder on your Mac for use in your own iPhone programs, not to a program on the iPhone itself.

    klapy, this should be possible--you can certainly do it for Mac programs, and many of the best Cocoa programmers are quite aggressive with their IB use. I don't know of anyone having done this for the iPhone, though, so you may be venturing into uncharted territory. Just try to follow the Mac docs where they make sense, I guess.

  • RELEVANCY SCORE 2.64

    DB:2.64:Outbound Delivery Document Flow Shows Tf Document Archived xd


    Hi folks,This could be a recurring problem.Case is regarding STO. The outbound del. is supposed to create an IB del. However for some reason this is not happening.When I checked the document flow, it shows "TF to stock in trans .49XXXX" AND the status as "archived".Pl. let me know what needs to be done further.Thanks. Regards,

    DB:2.64:Outbound Delivery Document Flow Shows Tf Document Archived xd

    Thanks Jrgen for providing suggestions.I found that this is a non-traceable bug in ECC system that creates an anomaly in the system. This can be corrected by applying the note 506510. Regards,

  • RELEVANCY SCORE 2.64

    DB:2.64:Appending To A File xx


    Can someone please let me know the reason(s) why appending data to an existing file only works with TEXT file and It does not work for MS word decoment or MS Excel file ?

    Is there another way ( Methods ) to append to these type of files than RandomAccessFile or ByteBuffer methods

    Thanks in advance

    IB

    DB:2.64:Appending To A File xx

    Thanks for the tip ...

    However , the data that I am appending into MS word
    for example is the same type ..

    ie I am trying to append a part from one document to
    the end of another documentThen you have to "append" the data in the right format. And in your case the "append" operation will really be more of an "insert".

    This is very simple to understand. There is no more need for discussion. Go get POI and use it.

  • RELEVANCY SCORE 2.64

    DB:2.64:Call Transaction mm



    Hi friends,

    i am doing BDC for PA30 using call transaction method. the syntax is given below. now my problem is,

    while i uploading data,the program is terminate and exit to SAP.

    CALL TRANSACTION 'PA30' USING BDCDATA

    MODE 'E'

    UPDATE C_UPDATE

    MESSAGES INTO I_BDCMSGCOLL .

    The err is given below,

    ib QAS: SAP System message:

    Internal TSKH error, session terminated/b/i

    Thanks Regards,

    Vallamuthu.M

    DB:2.64:Call Transaction mm


    Hi,

    You might have problems in uploading in PA30. Try PA40 to upload data. You can use the recording method, since i had a similar problem and tried the above method it worked fine.

    Regards

    Gokul

  • RELEVANCY SCORE 2.63

    DB:2.63:'Required For Authentication' Check Box In Authorization Ib 13


    Hi Folks,

    What is the Purpose of the *'Required for Authentication'* check box in Authorization IB.

    To give a background:

    I am trying to configure LDAP and the Authentication through LDAP is working fine. I maintain USER-GROUP mappings in Database Table for Authorization. The Authorization IB fetches the Group of an user from the database Table. Checking or Un-checking *'Required for Authentication'* check box in Authorization IB doesn't seem to make any difference.

    Ideally I would like users to be restricted from loging into OBIEE if they don't have a group associated in the custom User-Group mapping table.

    Any help would be appreciated.

    Thanks,
    Joe

    DB:2.63:'Required For Authentication' Check Box In Authorization Ib 13

    if you enter wrong userid and password and you want to get error message 'Access is prohibhted' then check that checkbox.See Joe's reply in below link

    OBIEE login

    Regards,
    Sandeep

  • RELEVANCY SCORE 2.63

    DB:2.63:Need Explanation Of Error Reason cj



    All,

    Can someone please explain the deauthentication reason below from my 1200 event logs:

    Reason: Previous authentication no longer valid.

    What causes this? I'm using non-Cisco clients - is there a specific inactivity time out that causes this?

    Thanks!

    DB:2.63:Need Explanation Of Error Reason cj


    The message should be informational. I expect the client is able to associate.

  • RELEVANCY SCORE 2.63

    DB:2.63:Do I Need Additional Hardware Besides Hp-Ib To Use Labview With 3487a p7


    I am trying to link an HP3497a to Labview software. can this software control the 3497a for less than 10 inputs? What type of PCI card do I need? I have an HP-IB in there now.

    DB:2.63:Do I Need Additional Hardware Besides Hp-Ib To Use Labview With 3487a p7

    A GPIB (aka HP-IB) card is necessary for the 3497 to communicate with a PC. If there's an HP-IB card, there's some knowledge bases about getting LabVIEW to connect to the card through VISA. There are some instrument drivers for the 3497A in LabVIEW and CVI at ni.com/idnet.It may help to use a Data Acquistion card with this application. National Instruments sells a variety of Data Acquisition cards that plug into the PCI bus. See ni.com/catalog for more details.Randy SolomonsonApplication EngineerNational Instruments

  • RELEVANCY SCORE 2.63

    DB:2.63:Ora-02050,Ora-02051 p1


    Hi,

    I get the below error when i run a particular procedure i get the below error. i searched in google dint find any proper solution. What might be the reason and where to look in for the below error. my db version is 11.2.0.1

    ORA-02050: transaction 24.3.10621 rolled back, some remote DBs may be in-doubt
    ORA-02051: another session or branch in same transaction failed or finalized

    regards

    007

    DB:2.63:Ora-02050,Ora-02051 p1

    Hello,

    You may have a look on the following Note of MOS:

    *Ora-02050 ,ORA-02051,ORA-06512 Error while refreshing an ON COMMIT Materialized View [ID 1376282.1]*

    Then, you'll understand better the answer of Fran.

    Besides this Note, this link may give you some details about ON COMMIT Materialized View:

    http://docs.oracle.com/cd/E11882_01/server.112/e25554/refresh.htm#i1006419

    Hope this help
    Best regards,
    Jean-Valentin

  • RELEVANCY SCORE 2.62

    DB:2.62:Addm mf


    I am getting below error when u rung addrmpt.sql file

    /u01/app/oracle/product/10.2.0/db_1/rdbms/admin/addmrpt.sql;

    declare
    *
    ERROR at line 1:
    ORA-20200: The instance was shutdown between snapshots 978 and 983
    ORA-06512: at line 42

    How to reslove this error? and what is the reason for this error?

    It is urgent.

    thanks in advance.

    DB:2.62:Addm mf

    hi,

    is that your db was up and running all the time? what is the snap interval ?

    thanks,
    baskar.l

  • RELEVANCY SCORE 2.62

    DB:2.62:Apphangb1 Error With Ib 7p


    I keep getting the apphangb1 error everytime that I try running my camera editing software, ib.
    I have tried the suggestions on this forum and even contacted the customer support for the software. None of them work.

    DB:2.62:Apphangb1 Error With Ib 7p

    I did try clean booting it, and the problem still occurred.
    The problem only seems to occur once I update the program to the most recent version. However I had the most recent version previously before it decided to freeze a month or so ago. I reverted to the previous version and it seems to work fine, with occasional
    bugs.

  • RELEVANCY SCORE 2.62

    DB:2.62:Rookie Question W/ Index Buffers + Vertex Buffers 98


    Hi,I'm having a real tough time with Index Buffers/Vertex Buffers.  A book I'm reading wants me to draw a kind of large (for me, anyway!) scene mesh using Index Buffers and Vertex Buffers.  It always comes out deeply Picasso-ed :[So I thought I'd try to scale it down to a box and figure out what I was doing wrong with a simpler mesh, but even my Box comes out picasso-ed when I try to use buffers from the mesh itself.  In the code sample below, there are really only 2 important methods -- InitializeGraphicsByHand (which works fine), and InitializeGraphicsFromMesh (which is red for some reason and also renders really bizarre).  I'm loading the index and vertex buffer data by hand in the first, and from a very simple mesh in the second.  I've been looking at this one for about 6 hours now and thought I'd ask fer help :[  Thanks to anyone who can help, or who is even willing to read and think about this one!,Jim
      (Global Vars)
    private Device device = null;
    private VertexBuffer vb = null;
    private IndexBuffer ib = null;
    private CustomVertex.PositionColored[] verts;
    private short[] indices;
    private float angle = 0.0f;
    private Mesh mesh;

    ///
    /// (This one works and renders fine)
    ///
    public void InitializeGraphicsByHand()
    {
    // Init DX
    PresentParameters presentParams = new PresentParameters();
    presentParams.Windowed = true;
    presentParams.SwapEffect = SwapEffect.Discard;
    device = new Device(0, DeviceType.Hardware, this, CreateFlags.SoftwareVertexProcessing, presentParams);

    // Vertices
    verts = new CustomVertex.PositionColored;
    verts[0] = new CustomVertex.PositionColored(-1.0f, 1.0f, 1.0f, Color.Purple.ToArgb());
    verts[1] = new CustomVertex.PositionColored(-1.0f, -1.0f, 1.0f, Color.Red.ToArgb());
    verts[2] = new CustomVertex.PositionColored(1.0f, 1.0f, 1.0f, Color.Blue.ToArgb());
    verts[3] = new CustomVertex.PositionColored(1.0f, -1.0f, 1.0f, Color.Yellow.ToArgb());
    verts[4] = new CustomVertex.PositionColored(-1.0f, 1.0f, -1.0f, Color.Gold.ToArgb());
    verts[5] = new CustomVertex.PositionColored(1.0f, 1.0f, -1.0f, Color.Green.ToArgb());
    verts = new CustomVertex.PositionColored(-1.0f, -1.0f, -1.0f, Color.Black.ToArgb());
    verts[7] = new CustomVertex.PositionColored(1.0f, -1.0f, -1.0f, Color.WhiteSmoke.ToArgb());

    vb = new VertexBuffer(typeof(CustomVertex.PositionColored), verts.Length,
    device, Usage.Dynamic | Usage.WriteOnly,
    CustomVertex.PositionColored.Format, Pool.Default);
    vb.Created += new EventHandler(this.OnVertexBufferCreate);
    OnVertexBufferCreate(vb, null);

    indices = new short[]{
    0,1,2, // Front Face
    1,3,2, // Front Face
    4,5,6, // Back Face
    6,5,7, // Back Face
    0,5,4, // Top Face
    0,2,5, // Top Face
    1,6,7, // Bottom Face
    1,7,3, // Bottom Face
    0,6,1, // Left Face
    4,6,0, // Left Face
    2,3,7, // Right Face
    5,2,7 // Right Face
    };

    ib = new IndexBuffer(typeof(short), indices.Length, device, Usage.WriteOnly, Pool.Default);
    ib.Created += new EventHandler(this.OnIndexBufferCreate);
    OnIndexBufferCreate(ib, null);
    }

    ///
    /// (This one renders crazy and is all red for some reason)
    ///
    public void InitializeGraphicsFromMesh()
    {
    // Init DX
    PresentParameters presentParams = new PresentParameters();
    presentParams.Windowed = true;
    presentParams.SwapEffect = SwapEffect.Discard;
    device = new Device(0, DeviceType.Hardware, this, CreateFlags.SoftwareVertexProcessing, presentParams);

    mesh = Mesh.Box(device, 2.0f, 2.0f, 2.0f);

    verts = (CustomVertex.PositionColored[])mesh.LockVertexBuffer(typeof(CustomVertex.PositionColored),
    LockFlags.ReadOnly, mesh.NumberVertices);
    mesh.UnlockVertexBuffer();

    vb = new VertexBuffer(typeof(CustomVertex.PositionColored), verts.Length,
    device, Usage.Dynamic | Usage.WriteOnly,
    CustomVertex.PositionColored.Format, Pool.Default);
    vb.Created += new EventHandler(this.OnVertexBufferCreate);
    OnVertexBufferCreate(vb, null);

    indices = (short[])mesh.LockIndexBuffer(typeof(short), LockFlags.ReadOnly, mesh.NumberFaces * 3);
    mesh.UnlockIndexBuffer();

    ib = new IndexBuffer(typeof(short), indices.Length, device, Usage.WriteOnly, Pool.Default);
    ib.Created += new EventHandler(this.OnIndexBufferCreate);
    OnIndexBufferCreate(ib, null);
    }

    private void OnIndexBufferCreate(object sender, EventArgs e)
    {
    IndexBuffer buffer = (IndexBuffer)sender;
    buffer.SetData(indices, 0, LockFlags.None);
    }

    private void OnVertexBufferCreate(object sender, EventArgs e)
    {
    VertexBuffer buffer = (VertexBuffer)sender;
    buffer.SetData(verts, 0, LockFlags.None);
    }

    private void SetupCamera()
    {
    device.Transform.Projection = Matrix.PerspectiveFovLH((float)Math.PI / 4, this.Width / this.Height, 1.0f, 100.0f);
    device.Transform.View = Matrix.LookAtLH(new Vector3(0, 0, 18.0f), new Vector3(), new Vector3(0, 1, 0));
    device.RenderState.Lighting = false;
    }

    protected override void OnPaint(System.Windows.Forms.PaintEventArgs e)
    {
    device.Clear(ClearFlags.Target, Color.CornflowerBlue, 1.0f, 0);

    SetupCamera();

    device.BeginScene();
    device.VertexFormat = CustomVertex.PositionColored.Format;
    device.SetStreamSource(0, vb, 0);
    device.Indices = ib;

    // Draw our boxes
    DrawBox(angle / (float)Math.PI, angle / (float)Math.PI * 2.0f, angle / (float)Math.PI / 4.0f, 0.0f, 0.0f, 0.0f);

    device.EndScene();

    device.Present();

    this.Invalidate();
    }

    private void DrawBox(float yaw, float pitch, float roll, float x, float y, float z)
    {
    angle += 0.01f;

    device.Transform.World = Matrix.RotationYawPitchRoll(yaw, pitch, roll) * Matrix.Translation(x, y, z);
    device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, verts.Length, 0, indices.Length / 3);
    }

  • RELEVANCY SCORE 2.62

    DB:2.62:Error_In_Node_Key_Table sx



    Hi Folks,

    When I'm trying to remove an RFC from Web Service it's giving me the below error and the Program is been terminated.

    Error : "Exception condition "ERROR_IN_NODE_KEY_TABLE" raised".

    What is could be the reason for the error??? How to resolve it.

    Thanks,

    Shiva.

    DB:2.62:Error_In_Node_Key_Table sx


    Re: Modify an RFC called by Web Service

  • RELEVANCY SCORE 2.62

    DB:2.62:Om Cycle: Instances In Ib (Csi Related Tables) m1


    Hello Team,
    Requesting you to please help me in finding APIs for below:

    Once OM cycle is completed. An Instance will be seen in the IB with status as Created.
    Now here all CSI related tables will get affected.
    1. CSI_T_TXN_LINE_DETAILS
    2. csi_t_ii_relationships

    Kindly let us know which API creates these information.

    Thanks/Suresh

    DB:2.62:Om Cycle: Instances In Ib (Csi Related Tables) m1

    Hello Team,
    Requesting you to please help me in finding APIs for below:

    Once OM cycle is completed. An Instance will be seen in the IB with status as Created.
    Now here all CSI related tables will get affected.
    1. CSI_T_TXN_LINE_DETAILS
    2. csi_t_ii_relationships

    Kindly let us know which API creates these information.

    Thanks/Suresh

  • RELEVANCY SCORE 2.62

    DB:2.62:Mm Error ..? 1f



    Hi all

    can anybody explain me how to rectify this below error , while crearting physical dociment

    "Number range for trans./event type IB in year 2008 does not exist"

    Thanks

    sap-mm

    DB:2.62:Mm Error ..? 1f


    Go to OMBT trxn code and Click on Change Groups button and Select Physical Inventory Documents tab using Tick mark and click on Change icon (pencil) and maintain Number ranges for the Year 2008 and Save.

  • RELEVANCY SCORE 2.62

    DB:2.62:Configuring Ipib With Non-Default Partition Key c1


    Hello

    I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.

    But this IB-VPPA was displayed as unconfigured on Solaris host
    ib::3BA0001004181,ffff,ipib IB-VPPA connected configured ok
    ib::3BA0001004182,fffe,ipib IB-VPPA connected unconfigured unknown
    ib::3BA0001004182,ffff,ipib IB-VPPA connected configured okConfiguration of new VPPA with cfgadm was unsuccessful:
    # cfgadm -c configure ib::3BA0001004182,fffe,ipib
    Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
    This operation will suspend activity on the IB device
    Continue (yes/no)? yes
    cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
    I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)

    Is it possible to configure VPPA with non-default pkey on Solaris ?
    Is it possible to configure more than 1 IPIB VPPA on single HCA port ?

    How to perform these configurations ?

    Thanks in advance.

    Regards,

    Denis

    DB:2.62:Configuring Ipib With Non-Default Partition Key c1

    Hello

    I want to put IB HCA port into non-default partition to create separate network on my IB fabric. On IB switch (Voltaire ISR9096) I created network with non-default partition key 0x7ffe and add HCA port to this partition.

    But this IB-VPPA was displayed as unconfigured on Solaris host
    ib::3BA0001004181,ffff,ipib IB-VPPA connected configured ok
    ib::3BA0001004182,fffe,ipib IB-VPPA connected unconfigured unknown
    ib::3BA0001004182,ffff,ipib IB-VPPA connected configured okConfiguration of new VPPA with cfgadm was unsuccessful:
    # cfgadm -c configure ib::3BA0001004182,fffe,ipib
    Configure the device: /devices/ib:fabric::3BA0001004182,fffe,ipib
    This operation will suspend activity on the IB device
    Continue (yes/no)? yes
    cfgadm: Hardware specific failure: configure operation failed ap_id: /devices/ib:fabric::3BA0001004182,fffe,ipibI unconfigured VPPA with default partition key (0xffff) on HCA port 0x3BA0001004182 and issued cfgadm for VPPA with pkey 0xfffe again - the same effect.
    I tried this on Solaris 10 8/07 and OpenSolaris b72 with the same result - no success ;)

    Is it possible to configure VPPA with non-default pkey on Solaris ?
    Is it possible to configure more than 1 IPIB VPPA on single HCA port ?

    How to perform these configurations ?

    Thanks in advance.

    Regards,

    Denis

  • RELEVANCY SCORE 2.62

    DB:2.62:Error At Xml Creation Time In Java Coding fz


    Hi All,

    I am getting below error in java.

    exception in getPdfFileForBill with given XsltId :: javax.ejb.EJBException: Unexpected Error:
    java.lang.NoSuchFieldError: conversion
    at oracle.xdb.XMLType.init(XMLType.java:529)
    at oracle.xdb.XMLType.createXML(XMLType.java:344)
    at com.elitecore.billing.ejb.bill.session.BillSearchSessionBean.getXsltContent(BillSearchSessionBean.java:7064)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

    what is the reason for this. i am using oracle 10g 10.2.0.1.0 ?

    thanks in advance.

    DB:2.62:Error At Xml Creation Time In Java Coding fz

    Hi All,

    I am getting below error in java.

    exception in getPdfFileForBill with given XsltId :: javax.ejb.EJBException: Unexpected Error:
    java.lang.NoSuchFieldError: conversion
    at oracle.xdb.XMLType.init(XMLType.java:529)
    at oracle.xdb.XMLType.createXML(XMLType.java:344)
    at com.elitecore.billing.ejb.bill.session.BillSearchSessionBean.getXsltContent(BillSearchSessionBean.java:7064)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

    what is the reason for this. i am using oracle 10g 10.2.0.1.0 ?

    thanks in advance.

  • RELEVANCY SCORE 2.62

    DB:2.62:Information Broadcasting Scheduling Options 7p



    Hi Gurus

    I have a Question on information broadcasting, I created queries and uploaded into portal. What i want is how to schedule the IB Report( PDF outputs) automatically. Reprot should run automatically every month 1st. I heard its possible using Process chain variant. Does anyone have any idea how to create a process chain variant for IB and how to schedule that porcess chain for every month.

    I did using IB schduling options. I am looking solution through Process chain variant .

    Thanks in Advacne.

    Points will assign

    Del

    DB:2.62:Information Broadcasting Scheduling Options 7p


    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296

    Regards

    Amiya

  • RELEVANCY SCORE 2.62

    DB:2.62:How To Expose Different Interface To Different Users Through .Idl Files?? ma


    When I implement the .idl file of a WinRT component, I get a problem of exposing needed interfaces to users who need them.
    In the original COM component, even though my component have several interfaces, I still can expose the needed interfaces to the users. For example.

    Class A : public IA, public IB, public IC....

    I can expose some of them without exposing all of it.
    In the .idl file, how can I write it to achieve this purpose??
    I know one class can have several interfaces like the form below
    runtimeclass A
    {
    [default]interface IA;
    interface IB;
    }
    if IA and IB all inherit frominterfaceIInspectable, do I see all interfaces when the class is activatable. Or I will see only the default interface and I can use some method to change interface like queryinterface??

    DB:2.62:How To Expose Different Interface To Different Users Through .Idl Files?? ma

    As Larry mentioned earlier in the forum, the documentation has yet to be released on WinRT authoring in IDL. To address this specific question, you cannot selectively 'expose' selected interfaces implemented by a WinRT class. You would need two different
    WinRT classes in two different IDLs. One for external use and one for internal use.

    Thanks,
    -David

  • RELEVANCY SCORE 2.61

    DB:2.61:Problem With Fotran-C Mixed Language Dll. mz



    My Fortran-C mixed language dll compiles and links without any errors. I have a Fortran executable that calls functions in this dll and during execution when it comes to the second PRINT statement in the code below, I get the following error:

    Unhandled exception at 0x00404e05 in Driver.exe: 0xC0000005: Access violation writing location 0xa4858d14.

    Here is the relevant code from the executable:

    PROGRAM DRIVER

    IB = 1
    CALL RGKNPATCH( IB, NPATCH)
    PRINT *, " NPATCH = ", NPATCH

    CALL RGKNPAN( IB, NPANC, NPAND, NPANP)
    PRINT *, " NPANC = ",NPANC, "NPAND = ",NPAND, "NPANP = ",NPANP
    .
    .
    .

    In one Fortran source file from the dll, I have:

    !============================================================
    subroutine RGKNPATCH ( ib, npatch)

    ! Expose subroutine RGKNPATCH to users of this DLL
    !
    !DEC$ ATTRIBUTES DLLEXPORT::RGKNPATCH
    USE CPROC

    ! Variables
    INTEGER(4), INTENT(IN) :: ib
    INTEGER(4), INTENT(OUT) :: npatch

    ! Body of RGKNPATCH
    CALL RGKNPATCHX( ib, npatch)

    end subroutine RGKNPATCH

    !============================================================
    subroutine RGKNPAN ( ib, npanc, npand, npanp)

    ! Expose subroutine RGKNPAN to users of this DLL
    !
    !DEC$ ATTRIBUTES DLLEXPORT::RGKNPAN
    USE CPROC

    ! Variables
    INTEGER(4), INTENT(IN) :: ib
    INTEGER(4), INTENT(OUT) :: npanc
    INTEGER(4), INTENT(OUT) :: npand
    INTEGER(4), INTENT(OUT) :: npanp

    ! Body of RGKNPAN
    CALL RGKNPANX( ib, npanc, npand, npanp)

    end subroutine RGKNPAN

    !============================================================

    In a second Fortran source file from the dll, I have:

    MODULE CPROC
    INTERFACE
    SUBROUTINE RGKNPATCHX ( ib, npatch)
    !DEC$ ATTRIBUTES C, DECORATE, ALIAS:'cRGKnpatch' :: RGKNPATCHX
    !DEC$ ATTRIBUTES VALUE :: ib
    !DEC$ ATTRIBUTES REFERENCE :: npatch

    INTEGER(4) ib
    INTEGER(4) npatch

    END SUBROUTINE

    SUBROUTINE RGKNPANX ( ib, npanc, npand, npanp)
    !DEC$ ATTRIBUTES C, DECORATE, ALIAS:'cRGKnpan' :: RGKNPANX
    !DEC$ ATTRIBUTES VALUE :: ib
    !DEC$ ATTRIBUTES REFERENCE :: npanc
    !DEC$ ATTRIBUTES REFERENCE :: npand
    !DEC$ ATTRIBUTES REFERENCE :: npanp

    INTEGER(4) ib
    INTEGER(4) npanc
    INTEGER(4) npand
    INTEGER(4) npanp

    END SUBROUTINE
    END INTERFACE
    END MODULE

    And in the c source file, I have:

    /*-------------------------------------------------------------------*/

    void cRGKnpatch( int ib, int* npatch)
    {
    int np = -1;

    if( 1 = ib ib = nbody
    Bodies[ib] Bodies[ib]-pPaneMaps)
    {
    np = Bodies[ib]-pPaneMaps-npanes;
    }

    *npatch = np;
    }
    /*-------------------------------------------------------------------*/

    void cRGKnpan( int ib, int* npanc, int* npand, int* npanp)
    {
    int npc = -1;
    int npd = -1;
    int npp = -1;

    if( 0 = ib ib = nbody
    Bodies[ib] (Bodies[ib]-qualify 1))
    {
    npc = Bodies[ib]-npan[0];
    npd = Bodies[ib]-npan[1];
    npp = Bodies[ib]-npan[2];
    }

    *npanc = npc;
    *npand = npd;
    *npanp = npp;
    }
    /*-------------------------------------------------------------------*/

    These all worked without any problems several years ago when cRGKnpan had just one less argument and it was likely compiled using an old Compaq Visual Fortran. What seems odd to me is that the call to RGKNPATCH and the following PRINT statement are executed without any problem.

    I have stepped through the whole execution of the call to RGKNPAN using the debugger and npanc, npand and npanp return with the correct values. Yet as soon as it tries to execute that second PRINT statement, I get the error mentioned above.

    DB:2.61:Problem With Fotran-C Mixed Language Dll. mz


    Thanks for the help Ian! Everything worked fine after adding the /iface:cvf option to the main program.

  • RELEVANCY SCORE 2.61

    DB:2.61:[Iphone Sdk] Use View Controllers In Ib, Or Forget They Exist? f7


    So here is the thing... most of Apple's sample code either does not use IB, or it uses it sparingly.

    However, I've heard that Apple suggests using IB to develop apps. Honestly, I'm a little confused as to what I'm supposed to do with the view controllers that are available via the IB pallet. I can't find any Apple tutorials that show how to build a complex application using IB to define the view controllers. However there must be some way to utilize them, I just wonder if it will save me time or cost me time in the long run.... hard to know what to invest my (limited) time learning right now.

    What do you guys suggest for someone new to Cocoa?

    DB:2.61:[Iphone Sdk] Use View Controllers In Ib, Or Forget They Exist? f7

    Think I've got it, finally. It sounds like the IB / xib system is more kin to an inversion of control framework than a simple GUI designer. I know that strictly speaking it probably isn't really an IOC pattern but it sounds like there are similarities in the way objects are created and handed off to outlets.

    Thanks guys

  • RELEVANCY SCORE 2.61

    DB:2.61:Error Code C101c401 ms


    i cant purchase apps on my htc hd7 when i get to the confirm purchase i get an error message error code c101c401 can some one please help and tell me what im doing wrong. ive tried removing and re submitting credit cards ive tried everything the customer
    support phone number for zune dont work in fact the zune support is practically non existant ( i live ib the UK )

    DB:2.61:Error Code C101c401 ms

    Hi scotkoch
    I had to call Zune support to get the issue resolved I was on the phone to them for over an hour but they did resolve the problem if you follow one of the threads posted above you will find a phone number for Zune support

  • RELEVANCY SCORE 2.61

    DB:2.61:Noob Question:What's Wrong With My Code? 3m



    im already ashamed to post this here, so please answer onyl if u feel like doing it. i wrote this:

    var a = this.pageNum;

    var b = this.numPages;

    var c = getPageRotation(a);

    for(i=0;ib;i++){

    if (c!=0){

    setPageRotation(a,,)=0

    };

    }

    when i try to run it, i get the "SyntaxError: syntax error 6:Console:Exec undefined" message. i couldnt figure out by myself what is wrong..

    DB:2.61:Noob Question:What's Wrong With My Code? 3m


    great, i understand now. this was not mentioned in the book im reading, though it seems thorough enough. ty!

  • RELEVANCY SCORE 2.61

    DB:2.61:Gp-Ib(Lpci)Fl Error Mesenges Said : -6 z8



    please help me

    i have buy one unit GP-IB(LPCI)FL card had install on my CPU when i want to communications with my ATE machine appear error mesenges said :

    GP-IB : -6

    xxx --- i forget what his mesenges :254

    anything i can do for this ???????????

    help me !!!!!!!!!!!!!!!!!!!!!!!1

    DB:2.61:Gp-Ib(Lpci)Fl Error Mesenges Said : -6 z8


    That's not an NI GPIB board. Why are you posting here? Contact the vendor and don't forget the actual error messages.

  • RELEVANCY SCORE 2.60

    DB:2.60:Pi 7.1 Plainhttp_Adapter am



    Hi, all

    i use the Client Http Adapter for XI 3.0 test tool to send messages to oure develop pi-system.

    there i found a strange behavior and could not found any reason. the fact is if i send a message with a wrong Sender Service (say Service_a is configured in IB and I send Service_B)

    i could see a red flag in sxmb_moni, because receiver determination failed.

    If I use the right Sender Service then no message could be found in SXMB_Moni and PI returns 500.

    were to find any logs to fix the error

    regards

    ralf

    DB:2.60:Pi 7.1 Plainhttp_Adapter am


    Probably PI doesn't like the name. Was it something like Tibco_*?

    Try creating another business service and see if that works. Then you will be sure it doesn't work in all cases.

    Regards,

    Prateek Raj Srivastava

  • RELEVANCY SCORE 2.60

    DB:2.60:Image Upload Error xd


    Hi, I had worked on my website. On uploading to the internet I discovered it was giving the error below. What is the reason for this ADDTerror? below

    Thanks
    Yomi

    Error:
    An error occurred while inserting the records.
    File upload error: File upload error. Internal error.
    Developer Details:
    tNG_multipleInsert error.
    An error occurred while inserting the records. (MINS_ERROR)
    File upload error: File Upload Error. No write permissions in "..\images1\" folder. (FILE_UPLOAD_ERROR)
    tNG Execution Trace - VIEW
    tNG_multipleInsert.executeTransaction
    STARTER.Trigger_Default_Starter
    tNG_multipleInsert.doTransaction
    tNG_multipleInsert.prepareSQL
    tNG_insert.doTransaction
    BEFORE.Trigger_Default_FormValidation
    tNG_insert.prepareSQL
    tNG_insert.executeTransaction - execute sql
    tNG_insert.postExecuteSql
    AFTER.Trigger_ImageUpload*
    ERROR.Trigger_Default_Insert_RollBack
    tNG_multipleUpdate.executeTransaction
    STARTER.Trigger_Default_Starter
    tNG_multipleDelete.executeTransaction
    STARTER.Trigger_Default_Starter
    tNG_multipleInsert.getRecordset
    tNG_insert.getFakeRsArr
    tNG_insert.getLocalRecordset
    tNG_insert.getFakeRecordset
    tNG_multipleInsert.getFakeRecordset

    DB:2.60:Image Upload Error xd


    Just to report, within this thread, that the same error is generated if you try to put a full web address into the destination folder in the "Upload and Resize Image" floating palate. I was trying to create an admin section that would be hosted locally but update files on a remote web server. Even with priviledges set to 777 on the images folder on the remote server, the error:

    ADDT tNG_multipleInsert error.

    An error occurred while inserting the records. (MINS_ERROR)

    File upload error: File Upload Error. No write permissions in "http://www.designstage.co.uk/images/"

    appeared, and the trace gave a similar message as in Yomi's originial message. Just to check, I uploaded the admin page to the remote server and tried again with the full web address and got the same error. When I changed the upload folder destination for the image to a relative path (in my case "../images/") everything worked happily.

    I'm adding to this thread in case anyone searches for the same problem.

    John

  • RELEVANCY SCORE 2.60

    DB:2.60:Help Me Start A Rogram - Complex Nembers fk


    I have an assignment that includes complex numbers, and I have no idea what a complex number is and where to start. Is there anyone that could help me get started?

    Program details:

    Given a complex number a+ib, we can define the following operations:

    * |a+ib| = square root of (a2+b2) is the absolute value operation.
    * s(a+ib)=sa+isb, where s is a real number, is scaling.
    * the complex conjugate of a+ib is a-ib.
    * (a+ib)+(c+id)=(a+c)+i(b+d) is addition.
    * (a+ib)*(c+id)=(ac-bd)+i(ad+cb) is multiplication. (Notice that scaling is just a special case, where b=0.)
    * do subtraction on your own.
    * (a+ib)/(c+id)=((ac+bd)+i(cb-ad))/(c2+d2) is division. You will have to be careful when dividing - the resulting denominator cannot be equal to 0!

    You are to write a program which contains two separate files.

    The first file will define a Complex class which should include exactly two data members, two constructors, the operations defined above, and a toString method. Important note, the scaling, conjugate, addition, multiplication, subtraction, and division operations all return another complex number. You also must include the appropriate set and get methods. Be sure you comment this class appropriately. Each function should have its own set of comments.

    The second file is an application to test your Complex class as follows: repeatedly read numbers of type double (a, b, c, d, and s), create and print the complex numbers a+ib and c+id, print each numbers absolute value, then create and print the following new complex numbers: s(a+ib), the complex conjugate of a+ib, and the sum, product, difference, and quotient of a+ib and c+id. Continue this loop until the user terminates the application.

  • RELEVANCY SCORE 2.60

    DB:2.60:Error In Time Evaluation_Pt60 7p



    Hello Team,

    While running time evaluation PT60 system throws below mention error,

    This error is coming only for newly hired employees and not for old emplyees. Time evaluation runs smoothly for emplyees hired in last month Aug14 as well.

    Can anybody guide me what could be the reason behind this.

    Thanks and Regards,

    Rajas

    DB:2.60:Error In Time Evaluation_Pt60 7p


    Thank you so much Venkatesh

    Best Regards,

    Rajas

  • RELEVANCY SCORE 2.60

    DB:2.60:Error While Getting Source From Materializedview 81


    SELECT dbms_metadata.get_ddl('MATERIALIZED_VIEW','MVPACKAGEHISTORY') FROM dual;

    I have got below error what is the reason of this?

    ORA-06502: PL/SQL: numeric or value error
    LPX-00007: unexpected end-of-file encountered
    ORA-06512: at "SYS.UTL_XML", line 168
    ORA-06512: at "SYS.DBMS_METADATA_INT", line 9462
    ORA-06512: at "SYS.DBMS_METADATA", line 1919
    ORA-06512: at "SYS.DBMS_METADATA", line 2792
    ORA-06512: at "SYS.DBMS_METADATA", line 4333
    ORA-06512: at line 1

    Kindly give reason for this error.

    DB:2.60:Error While Getting Source From Materializedview 81

    You may need some patches. Search in metalink for LPX-00007 or LPX-7. Most probably it may be related to the Bug 3897122

  • RELEVANCY SCORE 2.60

    DB:2.60:Grrr! Ib-3 Cone Slalom, Grrrr! xs



    IB-3 Cone slalom licence test in the FT86 is the last test I need for all gold licences and it is bugging me that I can only get silver.

    Anyone got any tip?

    Handbrake?

    I have active steering set to strong, ABS off and controller sensitivity @ 7

    Dose anyone else think that this is the hardest of all the licence tests?




    MyGarage

    DB:2.60:Grrr! Ib-3 Cone Slalom, Grrrr! xs


    The one that is killing me is that S2 Maserati race on Trial Mountain.

    I can get 2nd fairly easily but I don't have the power to to get past the Zonda in 1st place.

    I spent almost 2 hours on it the other day and it drove me nuts.

    I did wheel, controller, TCS off TCS on ABS off ABS on, etc.

    I can't get past the 1st car before the 1st corner so I don't understand how 1 of the video's shows it getting overtaken in thefirst 2 seconds ??

    Will have another shot at it this week sometime.

  • RELEVANCY SCORE 2.60

    DB:2.60:Hp-Ib Board Working In Labview? 9z


    I want to use my 82335 HP-IB card with labVIEW 6, if it is posible.I was informed that using Agilent IO Libraries I was in a good way to get my object, and that hp-ib card 82335 only work with Windows 95.Other question is what version of these libraries is right with my porpuse and if there is any problem working with 82335 HP-IB card, Windows 95, LabVIEW 6 and Agilent IO Libraries at the same time.Could you answer me about this question?Thanks.

    DB:2.60:Hp-Ib Board Working In Labview? 9z

    Hi,You may want to contact Agilent for more detailed information, but we have a knowledgebase that may help you out: http://digital.ni.com/public.nsf/3efedde4322fef198​62567740067f3cc/e56d3d4866be0a8a86256942006626f0?O​penDocumentI would recommend an NI-GPIB card for seamless integration.Best Regards,Aaron K.Application EngineerNational Instruments

  • RELEVANCY SCORE 2.59

    DB:2.59:What Is Max. Navigate Url Length When Navigate From Xaml To Xaml? 1s


    I was trying to pass an entire xml in a string from 1 xaml to another one but I got error telling me ShellPage URI too long ?
    what is the reason for that? I guess parameter length is restricted for function below?

    DB:2.59:What Is Max. Navigate Url Length When Navigate From Xaml To Xaml? 1s

    Not sure what the max string length is, but it might make more sense to put the xaml in shared memory (such as app global, within a dictionary).

    Then reference the object via a unique string name (as the hash key) in your URL. Or it can be a number in stringform that you parse into an int,that can serve as an index into an array of XAML strings.

    Hope this helps,
    Mark

  • RELEVANCY SCORE 2.59

    DB:2.59:Error C2440: = : Cannot Convert From Const Char * To Char_ 38


    Hi when i am trying to compile the following code (among other code) i get the error:

    Error 1
    error C2440: '=' : cannot convert from 'YExcel::BasicExcelCell' to 'char'
    c:\users\christos\desktop\das\a\a\a.cpp
    85 1 A
    and intellisense comes with:

    3
    IntelliSense: a value of type const char * cannot be assigned to an entity of type char
    c:\users\christos\desktop\das\a\a\a.cpp
    83 17 A

    My code is this :

    int ia=0;
    int ib=0;
    double a[40][2];
    char chr[40];

    BasicExcel xls;

    if(xls.Load(DAS_input_output_file_v1.0.xls))
    {
    BasicExcelWorksheet *Sheet1=xls.GetWorksheet(ThermalUnitsData);

    double *cell ;
    char *cellstr;

    cell = (double*)malloc(80*sizeof(double));

    cellstr = (char*)malloc(40*sizeof(char));

    if(Sheet1)
    {
    for (ib=0 ; ib2 ; ib)
    {
    for (ia=0 ; ia40 ; ia)
    {
    cell[ia] = Sheet1-Cell((ia1),(ib4))-GetDouble();
    a[ia][ib] = cell[ia];
    cout a[ia][ib] ;

    }
    cout endl next column;

    }

    cout endl ****String**** endl;
    for (ia=0 ; ia40 ; ia)
    {
    //BasicExcelCell* cellstr = Sheet1-Cell((ia1),4);
    cellstr[ia] = Sheet1-Cell((ia1),3)-GetString();
    chr[ia] = cellstr[ia];
    cout chr[ia] ;
    }

    }
    else
    {
    cout Sheet load problem;
    }

    xls.Save();

    DB:2.59:Error C2440: = : Cannot Convert From Const Char * To Char_ 38

    OK, but i don't believe that there is a way to do it, only by reading and putting in variables each cell...

  • RELEVANCY SCORE 2.59

    DB:2.59:Can You Please Explain Credit Loops In Ib Network? jx



    Please provide the technical docs for credit loops and congestion in IB network.@

    DB:2.59:Can You Please Explain Credit Loops In Ib Network? jx


    Please provide the technical docs for credit loops and congestion in IB network.@

  • RELEVANCY SCORE 2.59

    DB:2.59:Interface Builder ( Ib ) Font Bug? j1


    I noticed in ib, if i choose arial and then bold face (for labels, titles etc) it displays the text properly and is the proper bold. but when i deploy the app the text is gone, what i find wierd is in ib if you choose fonts that are not on iphone the text itself looks like it is the default font (eg. it doesnt let you use none iphone fonts)
    so is this a bug with arial bold only?
    i also tried to choose regular arial and then on the interface builder top menu i choose font bold and it turns the text bold, and it still doesnt display when compiled..

    It makes no sense to me to have ib to do interface stuff when something like simple font choosing is buggy and/or not properly supported.

    DB:2.59:Interface Builder ( Ib ) Font Bug? j1

    Human interface guidelines mandating a certain degree of consistency in appearance make a lot of sense, as would the fact that you cannot use fonts which are not available on the target system.

    Arial is a horrible ripoff of Helvetica anyway.

  • RELEVANCY SCORE 2.59

    DB:2.59:Avamar Error Codes 97



    Hi Folks,

    I want to know the below information regarding the error codes :

    1. What does the error code mean ?

    2. What could be the possible reason for the backup failures ?

    3. What should do for troubleshooting?

    4. Where we can find the logs for these backup failure ( client or Avamar grid) ?

    5. If any KB article or document is available for these error codes ?

    Error Codes : 10003,10007,10008,10009,10010,10015,10017,10018,10019 10020.

    Some times I do see there is partial backup failure with error code 10018 10020 , what could be the possible reason?

    Thanks ,

    Sam

    DB:2.59:Avamar Error Codes 97


    Hi S@m, J.H. is right, the codes you listed aren't necessarily tied to a specific error or cause. It is often a general state. If you double click on the job / error code in the Activity Monitor it will bring up the log file for that job. Normally at the top is a summary that will list the errors and where they are. They will be in red and that is actually a link to where they are in the main body of the log. Looking at the whole line of an error will give you a good description of what happened and where to start.

    I started my current job about 6 months ago and have been learning on the fly as managing the Avamar was handed to me very early as one of my main responsibilites. Something I learned very quickly is sometimes good documentation is easy to find and other times not at all from EMC! So there have things I've been able to find myself. Other things this forum has been a good resource and sometimes I have just had to call support.

  • RELEVANCY SCORE 2.59

    DB:2.59:Accessing Htmlb Elements In Javascript m7



    Hi,

    I have the one requirement ie. Validating user input on click of a button in my BSP application. Canone guide me how this can be done.

    Appriciate if anyone can provide a Sample code for this.

    In another forum I found a thread on the same topic, but couldn't understand completely.

    /thread/19386 [original link is broken]

    I am trying to follow the same approach mentioned below, given in the earlier thread.

    -

    function myValidateFields(){

    var ib, func, funcName;

    funcName = htmlb_formid+"_getHtmlbElementId";

    func = window[funcName];

    ib = eval(func("InputSAPNumberResults"));

    if (ib.getValue() 1 || ib.getValue() 250 ){

    alert("field value out of range");

    }

    }

    -

    I am not well versed with Java Script. Just started exploring this.

    "htmlb_formid", Can anyone tell what this represents in above solution. Browser is showing an error message "htmlb_formid" is undefined. I have copied the code as is in my BSP application. What I understand is either "htmlb_formid" has to be defined earlier or It should be replaced with my BSP application specific layout components(not sure).

    Hints please...

    Thanks,

    Pramod

    DB:2.59:Accessing Htmlb Elements In Javascript m7


    I think the one you are referring to is portal htmlb:tags.

    for the BSP specific stuff, siddarth has given a good example.

    The best way to identify how the names are rendered for htmlb tags, check out the source the rendered BSP page.

    Regards

    Raja

  • RELEVANCY SCORE 2.59

    DB:2.59:Ibcm Not In Collections k3


    Hi All,
    Where should I look   What should I see, to confirm that my IB client is properly communicating with its IB MP? I installed the INTERNET client to a remote laptop and it's still not showing up in collections. 
     
    My environment is Native Mode and all the Native Mode IBCM prerequisite were performed successfully with No issues....sigh of relief...THANKS to all that assisted!!  So now that my IB client is installed, how long will it take for the IB MP to see it?  I've already viewed the CCMSETUP log file it was a success...no errors.  I viewed the CCMEXEC file and I don't see anything major that raised a red flag.  Where can I find out if my client is TRULY communicating with its IB MP and what's going on behind the curtain???
    Thanks, D
    (aka Ms. BlackberryButterfly)

    DB:2.59:Ibcm Not In Collections k3

    Matt,
    Thanks! Performing the steps above narrowed down my root cause. Problem resolved!
     

  • RELEVANCY SCORE 2.59

    DB:2.59:Integertorgb In Win32 8j



    Hello,

    i am trying to use the subroutine integertorgb in a win32 program.

    based on the description i am using the following

    ....
    use ifqwin

    integer :: ir,ig,ib

    CALL INTEGERTORGB(2456, ir,ig,ib)

    ....
    all what i get is:

    error LNK2019: Verweis auf nicht aufgelstes externes Symbol "_INTEGERTORGB" in Funktion "_MODUL_FARBSKALEN_mp_XDLG_AENDERUNG_FARBE".

    what i am doing wrong?

    i also changed use ifqwin to ifwin, no difference

    Thanks in advance

    Frank

    DB:2.59:Integertorgb In Win32 8j


    Have you set your project up as a QuickWin project?
    If you have not, then I suspect the correct Quickwin Library containing the procedure will not be searched and so INTEGERTORGB will not be found. Make sure the relevant library is specified to be searched during the link step.

    In my version of IVF XE Composer, the interface for INTEGERTORGB is in module IFQWIN, as follows:

    SUBROUTINE INTEGERTORGB (RGB,RED, GREEN, BLUE)
    !DEC$ ATTRIBUTES DEFAULT :: INTEGERTORGB
    !DEC$ ATTRIBUTES DECORATE,C,ALIAS:"_integertorgb" :: INTEGERTORGB
    INTEGER*4 RGB
    INTEGER*4 RED
    !DEC$ ATTRIBUTES REFERENCE :: RED
    INTEGER*4 GREEN
    !DEC$ ATTRIBUTES REFERENCE :: GREEN
    INTEGER*4 BLUE
    !DEC$ ATTRIBUTES REFERENCE :: BLUE
    END SUBROUTINE
    END INTERFACE

    Howwever, a DUMPBIN /EXPORTS on IFQWIN.LIB shows the following:

    03D 00000000 SECT10 notype () External | __rgbtointeger
    03E 00000000 SECT11 notype Static | .text
    Section length 30, #relocs 0, #linenums 0, checksum 0, selection 1 (pick no duplicates)
    040 00000000 SECT11 notype () External | __integertorgb
    041 00000000 UNDEF notype External | __fltused

    So the symbol you want is __integertorgb, which has TWO leading underscores and is not decorated with @16!
    You need to link to IFQWIN.LIB to find it

  • RELEVANCY SCORE 2.58

    DB:2.58:Lsmw Bapi_Po_Create1 Po Service : Error 06436 In Case Of Account Assignment, Please Enter Acc. Assignment Data For Item 89



    Hi Experts,

    I have an error when trying to upload PO Service using LSMW with BAPI_PO_CREATE1 : Message 06436 In case of account assignment, please enter acc. assignment data for item.

    I had fill GL_ACCOUNT, COSTCENTER, CO_AREA.

    I also create structure relationships :E1PORDCR1

    E1BPMEPOHEADER

    E1BPMEPOHEADERX

    E1BPMEPOITEM

    E1BPMEPOITEMX

    E1BPMEPOSCHEDULE

    E1BPMEPOSCHEDULX

    E1BPMEPOACCOUNT

    E1BPMEPOACCOUNTX

    E1BPESLLC

    E1BPESKLC

    Please help, what is wrong or missing ?

    Is there any relation with Package Number Subpackage Number ? What is that and what is the purpose for ?

    Thanks,

    IB

    DB:2.58:Lsmw Bapi_Po_Create1 Po Service : Error 06436 In Case Of Account Assignment, Please Enter Acc. Assignment Data For Item 89


    If you do it in ME21N, then a SAP programmer hat done a lot to avoid that a user has to enter leading zeros, but in a load program you have to care about such technical requirments yourself.

    But those 2 fields look good so far.

    A usual BAPI error is that the corresponding X fields in the X structure are missed to set.

    Further you should search for OSS notes, use the error message number for the search. I found 5, but they have a lot related notes. Best you check them an make sure your system is up to date.

  • RELEVANCY SCORE 2.58

    DB:2.58:Creating Infiniband Virtual Network Between Vm's jp



    I have look around at the various discussions about infiniband networking and the seem to all focus on physical IB networking. What I would like to know is it possible to create a virtual IB network between VM's. I do not want to connect to via IB to a physical network from the VM's just between them virtually.

    Jim

    DB:2.58:Creating Infiniband Virtual Network Between Vm's jp


    If there is a virtual NIC and virtual switch available, you might try using SoftRoCE. It has exactly the same verbs API as IB, so is functionally equivalent.

    -Paul Grun

  • RELEVANCY SCORE 2.58

    DB:2.58:Not Able To Access Ir/Id Though I Am Able To Login To Xi Through Sap Gui? 73



    Hi All

    I am not able to access IR/ID though I am able to login to XI through SAP GUI.

    I am getting error Authentication failure in IB whereas the same password is working fine in SAP GUI.

    What can be the cause for the same ?

    Regards

    DB:2.58:Not Able To Access Ir/Id Though I Am Able To Login To Xi Through Sap Gui? 73


    hi Prateek/Chirag,

    Thanks for response but it got resolved , not authorisation issue, I had to restart the J2EE engine

    Regards

  • RELEVANCY SCORE 2.58

    DB:2.58:Public Tab c1


    Hi, what is the purpose of using Public Tab ib DC?Thanks,Vasavi.

    DB:2.58:Public Tab c1

    Hi, what is the purpose of using Public Tab ib DC?Thanks,Vasavi.

  • RELEVANCY SCORE 2.58

    DB:2.58:Catastrophic Error In Openmp Task Parallelism 13



    Hi,

    I got the following error when I tried to add task parallelism in a workshare construct.
    The code works well only with the do loop parallelism and without the task parallelism.
    i am simply trying to get the task parallelism to work for such loops. (ifort version is 11.1.038)
    Please help me in resolving this issue.

    Thanks.

    ERROR -

    ifort -O3 -r8 -g -traceback -openmp -c -o pc.o pc.f

    : catastrophic error: **Internal compiler error: segmentation violation

    signal raised** Please report this error along with the circumstances in

    which it occurred in a Software Problem Report. Note: File and line

    given may not be explicit cause of this error.

    compilation aborted for pc.f (code 3)

    make: *** [pc.o] Error 3

    The code snippet is as follows,
    ---------------------------------------------
    c$omp parallel
    c$omp do
    do m = 1, m_blk(myproc)
    c$omp task firstprivate(m) private(ii,jj,kk,ib,ie,jb,je,kb,ke)
    do kk = 1, nk_blk(m)
    do jj = 1, nj_blk(m)
    do ii = 1, ni_blk(m)

    ib = i_b_blk(ii,jj,kk,m)
    ie = i_e_blk(ii,jj,kk,m)
    jb = j_b_blk(ii,jj,kk,m)
    je = j_e_blk(ii,jj,kk,m)
    kb = k_b_blk(ii,jj,kk,m)
    ke = k_e_blk(ii,jj,kk,m)

    if(i_pc.eq.1)call pc_jac_blk
    1 (m,phi(ib-1:ie+1,jb-1:je+1,kb-1:ke+1,m),
    1 phi1(ib-1:ie+1,jb-1:je+1,kb-1:ke+1,m),
    1 ib,ie,jb,je,kb,ke)
    if(i_pc.eq.2)call pc_ssor_blk
    1 (m,phi(ib-1:ie+1,jb-1:je+1,kb-1:ke+1,m),
    1 phi1(ib-1:ie+1,jb-1:je+1,kb-1:ke+1,m),
    1 ib,ie,jb,je,kb,ke)

    enddo
    enddo
    enddo
    c$omp end task
    enddo
    c$omp end do nowait

    ....

    c$omp end parallel
    --------------------------------------------------

    DB:2.58:Catastrophic Error In Openmp Task Parallelism 13


    With the help of my colleague we were able to fix the problem by removing the -g flag in compilation.
    Also, it worked with compiler version - 12.0.1.107

    Thanks,
    Amit

  • RELEVANCY SCORE 2.58

    DB:2.58:Problem While Debugging C++ Application 3k


    hi
    While debugging i get following error.
     
     [Frames below may be incorrect and/or missing, no symbols loaded for ntdll.dll] 
     
    what does it mean?
    What is the basic reason for getting this kind of error?

    DB:2.58:Problem While Debugging C++ Application 3k

    Hi Atul,
     
    The debugger needs to construct the callstack after reaching break state. Without a PDB this is harder to do. Note that this isn't an error. It is just letting you know that the frames below may not be accurate because it is harder to walk the frames. You should be able to download system DLLs using http://msdl.microsoft.com/download/symbols and cache them and get more accurate callstacks.
    HTH.
     
    Azeem Khan
    VS Debugger.
     

  • RELEVANCY SCORE 2.58

    DB:2.58:Isa 550 Error - Sdsd: Http_Get: Error: Http_Read_Response Failed, Returned -2 9j



    Hi all,

    I have a problems with my installed Cisco ISA 550 firewall

    I received below error under the log messages.

        

         Could you be able to explain what is the reason for this message ?

    DB:2.58:Isa 550 Error - Sdsd: Http_Get: Error: Http_Read_Response Failed, Returned -2 9j


    Hi Bikram,

    HW and SW informations are below, and i have attached  two captures of two types (error, information) of logs messages what I  received.

    Firmware (Primary/Secondary)     : 1.2.17/1.0.3

    Bootloader Version                         : 0.0.20 (dual)

    PID VID                                           : ISA550-K9 V01

    Plz reply me if you want any further details.

    Thanks,

    Charith

  • RELEVANCY SCORE 2.58

    DB:2.58:System Lockup While Rendering Opengl On Ati Mobility Radeon 9600 c3



    Hello, I am having an issue on a fresh Arch install while running OpenGL applications (eg playing a game). After a minute or so of rendering, the enire system will lock up, screen goes blank, and becomes unresponsive to SYSREQ. dmesg is full of the following:
    [ 522.220167] radeon 0000:01:00.0: couldnt schedule ib
    [ 522.220176] [drm:radeon_cs_ib_chunk] *ERROR* Failed to schedule IB !
    [ 522.221468] radeon 0000:01:00.0: couldnt schedule ib
    [ 522.221472] [drm:radeon_cs_ib_chunk] *ERROR* Failed to schedule IB !
    [ 522.226194] radeon 0000:01:00.0: couldnt schedule ib
    [ 522.226202] [drm:radeon_cs_ib_chunk] *ERROR* Failed to schedule IB !
    [ 522.228693] radeon 0000:01:00.0: couldnt schedule ib
    [ 522.229298] [drm:radeon_cs_ib_chunk] *ERROR* Failed to schedule IB !
    [ 522.279577] radeon 0000:01:00.0: couldnt schedule ib
    [ 522.279586] [drm:radeon_cs_ib_chunk] *ERROR* Failed to schedule IB !

    DB:2.58:System Lockup While Rendering Opengl On Ati Mobility Radeon 9600 c3


    Synergic, ive looked at the bug report again.All posts in it deal with chipsets of the vergreen family (HD 5xxx or HD 6xxx) , your chipset is much older then that and uses a different driver.

    I suggest you create a new mesa bug ticket and refer to the old bug.

  • RELEVANCY SCORE 2.58

    DB:2.58:Error Category Xi_J2ee_Messaging_System x1



    Hi,

    I got an error in the sender side of message monitoring as below.

    Error Category XI_J2EE_MESSAGING_SYSTEM

    Error Code HTTP_TRANSMISSION_ERROR

    What could be the reason for this?

  • RELEVANCY SCORE 2.58

    DB:2.58:Interface Inheritance/Implementatio Question k9


    I have a question on what is the best way to implement classes that share a base class and a base interface. This classes have their own interface too. I would like others communicate with these classes only using their interfaces.

    Assume there is a base class CB and a base interface IB. IB defines one method IBM. The implementation of IBM is the same for classes that support IB. There is two derived classes CD1 and CD2. These derived classes inherit CB, implement IB, have their own interfaces
    ID1, ID2. The callers get an instance of ID1 or ID2 and would calls ID1/ID2 methods in addition to IB method (IBM). I don't know which of the followings is preferred/correct way to implement. Of course other suggestions is appreciated.

    1-

    class CB : IB
    {
    IBM() {}
    }

    class CD1 : CB, ID1
    {
    ID1Methods
    }

    Then caller gets an ID1 instance. To call IBM, he has to do a IB ib = id1 as IB.

    2-
    class CB
    {
    IBM() {}
    }

    interface ID1:IB
    {
    }

    class CD1 : CB, ID1
    {
    ID1Methods
    }

    Then the caller gets an ID1 instance and just call id1.IBM. The problem is here that since CD1 does not implement IBM directly (inherited from CB), it would be confusing.

    I don't want to implement IBM more than once. What's the right practice here?

    Thanks

    DB:2.58:Interface Inheritance/Implementatio Question k9

    It needs to implement the interface, however that implementation could also be abstract if you want to make the child class implement the methods. It doesn't NEED to support IB, that is up to you and your design. The way you described it there
    was a class CB with an interface IB, which is what Rudy put into his example. If it is a common interface with some functionality implemented or could be implemented at that level then I think it makes sense to have it there.

  • RELEVANCY SCORE 2.57

    DB:2.57:Peoplesoft Ses Error 7x


    Hi All,I have successfully configured Oracle SES and also PeopleSoft IB and Search Instance,now the ping test is success and deploy is a success.When i give crawl i am getting below error,Starting CrawlCrawl Failed. Crawler status failedAny help would be appreciated.Thank you.

    DB:2.57:Peoplesoft Ses Error 7x

    Hi All,I have successfully configured Oracle SES and also PeopleSoft IB and Search Instance,now the ping test is success and deploy is a success.When i give crawl i am getting below error,Starting CrawlCrawl Failed. Crawler status failedAny help would be appreciated.Thank you.