• RELEVANCY SCORE 3.16

    DB:3.16:Audio Problems m3





    Hello. I have and Compaq Presario CQ43. After and AVG problem solving, i have losted my audio device! The icon in the bottom right side says: "No output audio device installed". I tried detecting new HW, but it doesn´t work.

    DB:3.16:Audio Problems m3


    Hibem1971,

    Welcome to the HP Forums!

    For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.

    Thank you for your query, I will do my best to aid in this endeavor.

    i understand you had an issue, which AVG resolved, but you no longer have sound. You can use the HP Support Assistant to help resolves error and find drivers. You can also use MS Fix It to help with this issue. Here is a document on No Sound from the Speakers (Windows 7), to guide you through some troubleshooting. You have an option to do a restore back to a known good time.Using Microsoft System Restore (Windows 7).

    If you would like further assistance would you provide the exact model of CQ43 you have. How Do I Find My Model Number or Product Number?

  • RELEVANCY SCORE 3.04

    DB:3.04:Audio Output Issues 1d




    I have connected a Sony HVR-M15U desktop player/recorder to my MacPro and I am trying to now Log Capture in Final Cut Studio 5.1. We can see a picture and the clip settings show that there is audio coming through the Firewire, but we can't hear anything.

    In the Audio Video settings, I cannot choose "Firewire" as an output option because it is greyed out. But "Default," "Built-In Output," "Built-In Line" and "Digital" don't work either. No sound. And the computer's not muted or anything like that...

    What setting should I use to get the audio to play through my computer's speakers?

    DB:3.04:Audio Output Issues 1d

    The Audio box is checked underneath "Clip Settings"
    but that just means that I'm telling Final Cut to
    capture it. It's still not letting me hear it.

    The Preview checkbox is right beside that.

  • RELEVANCY SCORE 3.03

    DB:3.03:Audio Port ck


    My audio output is working fine when I don't use headphones, but when I plug them in they don't work and the audio still plays from the built in speaker. And these are working headphones. What should I do?

    DB:3.03:Audio Port ck

    have you discovered a solution to this problem yet? I have the same issue.

  • RELEVANCY SCORE 2.99

    DB:2.99:Imac Usb Audio Drops To External Dac (But Optical Remains Ok) p1


    I have an external DAC connected to my iMac via USB (direct not via hub) and Toslink Optical.In System Preferences Sound Output, the DAC shows up correctly, as also it does in Audio Midi Setup Audio Devices Output.Also, the 'Built-in Output' (Optical) shows up correctly.I can switch between USB or optical input on the DAC and they both work fine.However, peridocally, the USB output from the iMac will simply stop working: aside no sound, the 'lock' light on the DAC goes off.The USB settings remain in prefs/midi panes, and the USB DAC device remains shown correctly (and the format etc. can continue to be adjusted).The optical output is not affected and continues to work normally, so switching the DAC to that gives me sound back.Unplugging and replugging the USB connection 'restores' the USB sound.Any ideas what's getting lost/corrupted here?

    DB:2.99:Imac Usb Audio Drops To External Dac (But Optical Remains Ok) p1

    I have an external DAC connected to my iMac via USB (direct not via hub) and Toslink Optical.In System Preferences Sound Output, the DAC shows up correctly, as also it does in Audio Midi Setup Audio Devices Output.Also, the 'Built-in Output' (Optical) shows up correctly.I can switch between USB or optical input on the DAC and they both work fine.However, peridocally, the USB output from the iMac will simply stop working: aside no sound, the 'lock' light on the DAC goes off.The USB settings remain in prefs/midi panes, and the USB DAC device remains shown correctly (and the format etc. can continue to be adjusted).The optical output is not affected and continues to work normally, so switching the DAC to that gives me sound back.Unplugging and replugging the USB connection 'restores' the USB sound.Any ideas what's getting lost/corrupted here?

  • RELEVANCY SCORE 2.96

    DB:2.96:Itunes And Ipod Connected To Airport Express cd


    Is it possible to connect itunes and ipod on 3GS to audio output built-in airport express?

  • RELEVANCY SCORE 2.96

    DB:2.96:Lenovo Z500 Built-In Mic Doesnt Work sp


    Hi I have
    Lenovo z500
    windows 8
    driver Realtek HD audio manager 6.0.1.6798
    and my internal microphone doesn´t work

    Link to image

    I checked microphone properties - Levels and everything is on 100%, nothing is muted. But still microphone doen´t recognize any voices. I was trying shout but nothing.
    Please help me, I am desperate.
    Thank you very much for any advises

    Moderator note: images larger than 50k converted to links per forum rules: Lenovo Community Participation Rules

    DB:2.96:Lenovo Z500 Built-In Mic Doesnt Work sp

    hi tynej,

    Welcome to the Lenovo Forums.

    If you have already adjusted the microphone level/ boost and you don't get any volume fluctuation when you try to record via sound recorder or skype then you may have a bad microphone connection.

    What you can try is to:

    1. Boot into the BIOS (press F2 during boot-up) and restore factory defaults by pressing F9 and F10 to save the settings. This will clear the cmos settings and re-initialize the hardware devices attached.

    2. Try to install Ubuntu via Wubi to isolate if it's an OS issue (optional - can be uninstalled afterwards)

    3. Try a USB microphone / headset. If this works, you may need to contact lenovo for service.

    Hope this helps.



    Did someone help you today? Press the star on the left to thank them with a Kudo!If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.Follow @LenovoForums on Twitter!

  • RELEVANCY SCORE 2.94

    DB:2.94:Blackmagic Preview Built-In Line Out Audio? dx


    Esteemed fellow editors,In Final Cut Pro, I can preview video on my NTSC monitor using my Blackmagic Intensity card, and preview audio using my Mac's built-in output or built-in line output. Does anyone know how to do this in Premiere?Thanks!

    DB:2.94:Blackmagic Preview Built-In Line Out Audio? dx

    try the following,Edit-Preferences-Audio Hardware-try set default device to BM or your onboard sound cardor Asio settings and tisk the BM box or onboard sound.darren

  • RELEVANCY SCORE 2.93

    DB:2.93:Audio Out To Receiver Doesn`T Work... 3m



    I have a dell xps 630i running win xp pro sp3, and I`m trying to output sound to my Yamaha receiver through a jack 3,5 mm to RCA audio and none of the sound outputs works, also I tryied the front speakers output same result. I did the same with another computer and it works, I`m wondering what`s the deal...and what kind of cables should I use to do this?

     

    P.S. the regular dell speakers work fine.
    Message Edited by Mareshalu on 08-26-2008 11:29 AM

    DB:2.93:Audio Out To Receiver Doesn`T Work... 3m


    I have a dell xps 630i running win xp pro sp3, and I`m trying to output sound to my Yamaha receiver through a jack 3,5 mm to RCA audio and none of the sound outputs works, also I tryied the front speakers output same result. I did the same with another computer and it works, I`m wondering what`s the deal...and what kind of cables should I use to do this?

     

    P.S. the regular dell speakers work fine.
    Message Edited by Mareshalu on 08-26-2008 11:29 AM

  • RELEVANCY SCORE 2.91

    DB:2.91:How Can I Get The Audio To Work Again? f9


    I have no audio output (external or internal) on my computer. When I click on the speaker is is in gray. When I go to sound in network preferences and go to output it only lists digital output/built-in output and is says the selected device has no output controls. There are no other choices than this. The input sound is working but not the output on the internal speaker or through the jack. Please help.

    DB:2.91:How Can I Get The Audio To Work Again? f9

    Jay this was really helpful. I had the exact same problem (aluminum body). The paperclip did the trick, though I certainly had to be a bit robust with it. Thanks again!

  • RELEVANCY SCORE 2.91

    DB:2.91:Using Built In Output Instead Of Duet Output 38


    Bear with me, I'm new to logic. I want to use my built in output speakers to listen to playback from logic but still use my Duet as the input. This was easy to do in Garageband by simply changing the audio input to the 'Duet' and setting the audio output to 'built in output'. In logic it looks like the output is always at 'output 1-2' which I'm assuming is the duet outputs. Is there a way I can use my duet for the input only and use the built in output for playback in Logic 8?

  • RELEVANCY SCORE 2.90

    DB:2.90:Inbuilt Microphone Doesn't Work When Headphones Are Plugged In (Hp Pavillion Dv2915nr) p3



    Hi, I've got a rather weird problem which started sometime ago.

    My inbuilt microphone on my Hp Pavillion 2915nr works fine when there's no speakers or headphones plugged in. However, when i plug in anything into any of headphone jacks the in-built microphone stops working.

    DB:2.90:Inbuilt Microphone Doesn't Work When Headphones Are Plugged In (Hp Pavillion Dv2915nr) p3


    Hi, I've got a rather weird problem which started sometime ago.

    My inbuilt microphone on my Hp Pavillion 2915nr works fine when there's no speakers or headphones plugged in. However, when i plug in anything into any of headphone jacks the in-built microphone stops working.

  • RELEVANCY SCORE 2.89

    DB:2.89:Microsoft Lifecam Studio Doesn't Work On Skype For Windows 10 Tech Preview 9c



    Microsoft LifeCam Studio doesn't have video on the built-in Skype app in Windows 10 build 9926. Audio works fine. What iseven more interesting - the same camera works just fine withSkype 7.1 when installedin parallel on the same copy ofWindows 10. Tested with the same results on two computers.

  • RELEVANCY SCORE 2.88

    DB:2.88:Remove Html5 Audio kd



    Hi,

    In a webworks app built using jQueryMobile framework, insideone of my pages, I have an audio element created as follows:

    $("#output").append('audio id="notificationAudio" autoplay="autoplay" controls="controls"source src="http://domain.com/audio.amr" //audio');

    this works ok: app shows player and plays file.

    But when I change page ($.mobile.changePage()), i do remove the audio element as follows:

    $("#notificationAudio").remove(); $("#output").empty();

    but this doesn't work: player stays sticky in position, floating over content, even if it doesn't appear in DOM anymore!

    This is happening on app and browser of OS6 (tested on both torch 9800 and curve 9300).

    Any ideas?

    Thanks in advance,

    M.

    DB:2.88:Remove Html5 Audio kd


    Does the same on my 9800.

    6.0.0.600 (2647)

  • RELEVANCY SCORE 2.88

    DB:2.88:Bluetooth Speakers On Mac Mini sa



    I'm trying to use Skype on a Mac Mini OS version 10.7.5

    Skype version 6.2.59.1117

    Skype audio preferences will only allow audio output (Speakers) on "Built-in Output (internal speakers)" and will not give me the option to send output to the Creative T12 Bluetooth speakers that are set up as the primary audio output device for the computer. The internal speaker is very quiet and hard to hear. Audio and video input work fine though a Logitech USB camera.

    All other applications send audio out to the bluetooth speakers. Is there any way to use the bluetooth speakers as the skype audio output?

    DB:2.88:Bluetooth Speakers On Mac Mini sa


    A few of us who use BT speakers or headphones are having the same problem with the latest version of Skype. The BT device no longer shows up on the drop down menu within Skype preferences.

    Still looking around.

    Cheers.

  • RELEVANCY SCORE 2.87

    DB:2.87:Electric Guitar Getting Signal, But No Sound 3x


    Question - In Logic Pro 8 I am getting signal in my channel strips when I play, but no sound out of my speakers.I will try to describe all my settings and what I have tried so far to make this a bit quicker. Let me also say I have had this setup working before, but it was about a year ago last time I used it.*Heres my setupElectric guitar (Guitar chord) Blackbox Reloaded audio interface (On Bypass) (USB cable) Imac (Headphone Jack) Logitech 6pc computer speakersI read that Logic can't have 2 devices for input and output. (Blackbox = Input / Logitech Speakers = Output).So I made an aggregate device to work with this - Blackbox to Built-In Output. (Built-In Output for logitech speakers)In LogicI create new audio track click on Input Monitoring and Record EnableLogics Preferences Audio Devices Core Audio. I have the aggregate device [Blackbox - Built-In Output] for my device.From this point I can see signal moving when I play, and when i record I get audio waves in the audio region, yet no sound.Heres my Imac's Audio/Midi setup. under Audio Devices I have-Default Input - BlackBox - Built-In Output ( the aggregate device I made)Default Output - Built-In OutputSystem Output - Built-In OutputIn my Imac's System Preferences SoundInput - Blackbox - Built-In OutputOutput - Headphones, Built-In OutputIf I plug headphones into the Blackbox I get sound from the guitar, but only with effects from the blackbox, none from logic.Thats all I can think of right now to say. If anyone needs more info or see's something wrong with my setting please let me know, been wanting to record relaly bad latley. Thanks!

    DB:2.87:Electric Guitar Getting Signal, But No Sound 3x

    Question - In Logic Pro 8 I am getting signal in my channel strips when I play, but no sound out of my speakers.I will try to describe all my settings and what I have tried so far to make this a bit quicker. Let me also say I have had this setup working before, but it was about a year ago last time I used it.*Heres my setupElectric guitar (Guitar chord) Blackbox Reloaded audio interface (On Bypass) (USB cable) Imac (Headphone Jack) Logitech 6pc computer speakersI read that Logic can't have 2 devices for input and output. (Blackbox = Input / Logitech Speakers = Output).So I made an aggregate device to work with this - Blackbox to Built-In Output. (Built-In Output for logitech speakers)In LogicI create new audio track click on Input Monitoring and Record EnableLogics Preferences Audio Devices Core Audio. I have the aggregate device [Blackbox - Built-In Output] for my device.From this point I can see signal moving when I play, and when i record I get audio waves in the audio region, yet no sound.Heres my Imac's Audio/Midi setup. under Audio Devices I have-Default Input - BlackBox - Built-In Output ( the aggregate device I made)Default Output - Built-In OutputSystem Output - Built-In OutputIn my Imac's System Preferences SoundInput - Blackbox - Built-In OutputOutput - Headphones, Built-In OutputIf I plug headphones into the Blackbox I get sound from the guitar, but only with effects from the blackbox, none from logic.Thats all I can think of right now to say. If anyone needs more info or see's something wrong with my setting please let me know, been wanting to record relaly bad latley. Thanks!

  • RELEVANCY SCORE 2.84

    DB:2.84:No Internal Audio Option Available..... 9m


    I don't have any Built-In Audio from my PowerBook 17 speakers... In the System Preferences - Audio, the only Output option is Digital Audio. In the Audio Midi setup the Default output is Built-In Audio and the Output settings are 44kHz 2ch-16bit but the only source available is Digitgal Out......?

    Analogue Line output works fine, and I can see red optical activity from the line/optical output, but when disconected I get no audio from the built in speakers.

    DB:2.84:No Internal Audio Option Available..... 9m

    I don't have any Built-In Audio from my PowerBook 17 speakers... In the System Preferences - Audio, the only Output option is Digital Audio. In the Audio Midi setup the Default output is Built-In Audio and the Output settings are 44kHz 2ch-16bit but the only source available is Digitgal Out......?

    Analogue Line output works fine, and I can see red optical activity from the line/optical output, but when disconected I get no audio from the built in speakers.

  • RELEVANCY SCORE 2.84

    DB:2.84:Solo And Mute Buttons Help 73


    Maybe I'm missing something- but I've never been able to get the solo and mute buttons to work in FCP 6 and now 7. Is there some special way you need to have the audio output preferences set up or the sound output routed? I've had to just turn the channels on and off with the green button, but this defeat's the purpose of the mute and solo switchs. It also means I have to re-render.

    My audio playback is set to Built-in Line Output. Audio Output is set to stereo monitoring L+R. Everything else is set to default. . .

    Shouldn't the buttons just work? Or this there another step that I'm skipping in the audio output tab or some other tab?

    DB:2.84:Solo And Mute Buttons Help 73

    Ya learn something every day with FCP. Thanks Nick.

  • RELEVANCY SCORE 2.84

    DB:2.84:Setting Different Audio Devices For Input / Output? m3


    Alright, my speakers are hooked up to my computer via Built-In Audio, and I have my microphone connected via an M-Audio FireWire Solo. In Audio / Devices / Core Audio, I can either set it to Built-In Audio and hear my project, or FireWire Solo and record audio, but not both.

    In GarageBand it was fairly simple: Built-In was set as my Output, and FireWire Solo was set as my input, so I could both record and play back without having to change settings every time. How do I do this in Logic?

    DB:2.84:Setting Different Audio Devices For Input / Output? m3

    No problem. Have fun making music and welcome to the forum.

    Stootka

  • RELEVANCY SCORE 2.84

    DB:2.84:My Built-In Mic Doesn't Work Over The Internet xf



    The built-in Microphone on my TR5MP does not work over the internet eg on MSN messenger. No sound is received by the people on the other end. Although it works perfectly well when not using it through the internet i.e. on sound recorder etc. I've also tried plugging in an external mic, but that also have the same effect, no sound can be heard on the other side. I have done the audio/visual wizard setting in the tools menu and it works fine during testing., but not actually on the web. please can anyone help!

    DB:2.84:My Built-In Mic Doesn't Work Over The Internet xf


    The built-in Microphone on my TR5MP does not work over the internet eg on MSN messenger. No sound is received by the people on the other end. Although it works perfectly well when not using it through the internet i.e. on sound recorder etc. I've also tried plugging in an external mic, but that also have the same effect, no sound can be heard on the other side. I have done the audio/visual wizard setting in the tools menu and it works fine during testing., but not actually on the web. please can anyone help!

  • RELEVANCY SCORE 2.83

    DB:2.83:Samson C01u Condenser Mic ks


    I found several sources that mentioned using aggregate devices to get the samson C01U Mic working in Logic Express. The instruction says to choose the C01U and "Built in Audio" from the list in the add aggregate device screen. However, "Built in audio" does not exist whereas "built in output" and "built in input" do. I can get my MIC to work only when I choose built in output along with C01U. The problem is I get output through my speakers when I'm recording. I never did when I used the same mic in Garageband. I am accustomed to hearing the other tracks and not hearing the input stuff I'm recording. This also makes the system prone to feedback. What can I do?

    DB:2.83:Samson C01u Condenser Mic ks

    No I didn't. My hunch is that selecting Built in output in the aggregate device editor causes the recording to output similar to input monitoring. Guess I'll have to deal with it. The end result is that I am struggling with latency. I would just rather not hear what I'm playing (other than the live sound) while I record.

  • RELEVANCY SCORE 2.83

    DB:2.83:Debugger Doesn't Work p3



    Debugger will not work when testing on-device. Breakpoints don't get hit.

    Just built it in JDE 5 and loaded on device. Attached debugger. It shows output messages, but does not trip. Tried restarting JDE, resetting device etc. Tried 2 different apps. Nothing.

    Has anyone experienced this and solved it? This happened before when I was using the preprocessor, but now it's just a simple app.

    DB:2.83:Debugger Doesn't Work p3


    Phone has 6.0.0.524 , only Verizon 9650 simulator I can find is 6.0.0.431 . I've got that sim installed, and did try the 6.0 JDE also. It always gives the two pop-up errors when attaching, won't report many variables, and usually doesn't show the subclass of an exception.

    A couple of breakpoint incidents were traced to the cause, but other times I don't know why it doesn't work.

    For example, it happens if I use the preprocessor, or if the app has a line like this at the top of main():

    if (DeviceInfo.isSimulator()) return;

    In that case it won't even break at the start of that line, it just doesn't break anywhere (running on device, not in simulator). Removing the above line fixed that particular case (breakpoints then worked), and no longer using the preprocessor solved it in another case.

  • RELEVANCY SCORE 2.82

    DB:2.82:No Audio Output Device Installed dc


    I don't know exactly what i did but i was trying to change the properties(bass, treble,etc.)  of my speakers that are connected to my laptop I did something and now  there is an X on the speaker symbol at the bottom of my screen, my speakers won't work, my laptops built in speakers won't even work. When I place the arrow over the speaker symbol with the x is says no audio output device is installed. the speakers were just working fine.

    DB:2.82:No Audio Output Device Installed dc

    Hi,

    I have the same problem; after going to the playback tab there is nothing applicable. It says that there are no devices
    installed. PLEASE HELP ME!

  • RELEVANCY SCORE 2.82

    DB:2.82:Airplay - Use Built-In Audio Output While Mirroring sj


    Yesterday I tried to configure my headless mac mini to use airplay mirroring to my ATV3. This in general works beautifully.The thing is, I use this machine as hifi-transport and want to continue using the local audio output (S/PDIF / Toslink / USB DAC) during mirroring.I could not find any way of doing this. in Audio MIDI mixer, the sound output switches to Airplay as soon as I enable mirroring. If I then use the Audio MIDI utility to switch back oudio output to the built-in output, it automatically deactivates the mirroring session.Even creating an aggregate and/or multiple output audio device in Audio MIDI utility and put together Airplay output and the built-in output, it does not work...Anybody have any idea how to solve this?

    DB:2.82:Airplay - Use Built-In Audio Output While Mirroring sj

    se also https://discussions.apple.com/message/20238906#20238906

  • RELEVANCY SCORE 2.82

    DB:2.82:Built-In Microphone Doesn't Work js



    Built-in microphone and speaker stopped working since some kind of HP update and indicated as "no audio device is found". So I researched online and installed High Definition Audio Device and now the speaker us working but still no microphone. I can't even skype with my family oversea and am totally disappointed at this HP computer (pavilion dv6700). I appreciate if anyone could solve this problem!

    Yoko

    DB:2.82:Built-In Microphone Doesn't Work js


    GIVE ME NECESSARY DRIVER DOWN LOADS APPROPRIATE FOR COMPAQ PRESARIO V3777TU LAPTOP MEANT FOR WINDOW XP

  • RELEVANCY SCORE 2.82

    DB:2.82:Audio Jack Doesn`T Work jm



    Today when i plugged out headphones, it doesn`t display that you`ve unplugged headphones, seems goes something wrong. Now i can hear sonud only from plugged headphones. How to repair this problem?

    DB:2.82:Audio Jack Doesn`T Work jm


    your options are probably something like

    a) try another pair of headphones

    b) reboot computer

    c) check that the Windows Audio service is running

    d) Goto the Nokia download site for the booklet, download the Realtek high definition audio driver and reinstall it

    As you might know in normal operation you should get a small popup when you insert or remove your headphones

  • RELEVANCY SCORE 2.82

    DB:2.82:Can't Get Audio Via Hdmi mz


    I have a brand new MacBook Pro (Dec. 2012) purchased with a Moshi HDMI AdapterThe cable and TV I am using work fine with another HDMI source.I have done everything the instructions say. The video works fine and the TV shows up in System Preferences / Audio / Output but nothing changes when I select it. The sound continues to go to the built-in speakers

    DB:2.82:Can't Get Audio Via Hdmi mz

    Apple sold me this adapter with the computer, so perhaps they will make it right. I've used another Monoprice adapter in the past with poor results - had to throw it in the trash.

  • RELEVANCY SCORE 2.81

    DB:2.81:Vaio Sz3 Update With Vista And Mircophone Doesn't Work fj



    Hi there,I bought 2 month earlier my SZ3 built with XP.I receive yesterday the Vista update !!!But, because there is a but, the audio codec gived with the DVD drivers doesn't work... but the original Vista driver work so I have all the sounds.The microphone is not in the driver windows (or I do not know where) and it doesn't work !!!If anyone know how to fix this it would be great !!! Thanks

    DB:2.81:Vaio Sz3 Update With Vista And Mircophone Doesn't Work fj


    Ok, from what I understand is using the drivers on the Sony website disables your DVD soundand from using the Windows drivers, your DVD works but then your MIC does notWhat DVD software do you use? It might be that the DVD software is not compatible with your Vista installation.I have a SZ4XWN/C and the drivers are from the Vaio website.I can watch DVDs and my MIC works fine.If you go to control panelsoundsrecording tabyou should see the microphone applet there. the bars should move up and down as there is noisedoes this work?Why not try to upgrade the driver to the Sony ones, and test the DVD from VLC Player?

  • RELEVANCY SCORE 2.80

    DB:2.80:Audio Doesn't Work On My Pavilion M6-1045dx x1



    What can I do to fix it?

    DB:2.80:Audio Doesn't Work On My Pavilion M6-1045dx x1

    Thank you for the response. If you are experiencing sound issues, I would like you to follow troubleshooting on this Microsoft document to resolve the issue:http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7v1h=win8tab1v2h=win7tab...

    Please follow the entire document, and inform me of your results. I will continue to troubleshoot if necessary.

    Mario

  • RELEVANCY SCORE 2.80

    DB:2.80:Select Audio Output Manually mp


    I use optical output with DAC. But sometimes I want to play music via built-in speakers. How can I change output device manually?

  • RELEVANCY SCORE 2.80

    DB:2.80:No Speaker Output 3x


    My speakers don't work with rear output, yet they work with front panel output. Also my headphone works with either. Help. My Sound is built-in Realtek High Definition Audio

    DB:2.80:No Speaker Output 3x

    Hi,
    I solved that issue by configuring speakers to 7.1, though I have 5.1
    Your rear speakers will be the "lateral" speakers in Realtek Control Panel.
    Also uncheck the rear speakes (those in Realtek Control Panel).
    Carlos

  • RELEVANCY SCORE 2.80

    DB:2.80:Lost All "Built-In Output" Option Everywhere? 1x


    Please excuse me if I am posting this topic/question in the wrong forum. Although I recently purchased a Macbook Pro 15", I still own and often use my older Powerbook 12". In any case, my Powerbook recently lost all "Built-in Output" as an option everywhere- System Preferences (sound), Midi setup, Final Cut Pro, etc.... For example and more specificallly, in System Preferences (Sound), under the "Output" category, it states that my Internal Speakers are using the port "built-in audio" and in Midi Setup there is no option for "built-in output" anywhere.

    What is strange is that my internal speakers work fine.

    Does anyone have any information on how I may resolve this issue? I can't be completely sure, but I think the problem initiated after using Final Cut Pro.

    Any iinformation and help is appreciated. Thank you.

    Macbook Pro 15" Mac OS X (10.4.7)

  • RELEVANCY SCORE 2.80

    DB:2.80:Microphone Doesn't Work mm



    My microphone doesn't work

  • RELEVANCY SCORE 2.80

    DB:2.80:Digital/Analog Output 38


    hi
    i've read a lot of discussions about the macbookpro output but it seems that i have a particular problem:
    few days ago i accidentally removed the headphones jack from the mbp output socket with a hard move...
    now i still listen to the mbp built-in audio source through my headphones (so i guess it works in analog mode) but i can't turn off the digital/optical audio red light from the socket?
    any idea?
    i already tried:
    smc reset, and various 'toothpick' solutions i've found in other topics but it doesn't work...
    tnx in advance
    massimo

    DB:2.80:Digital/Analog Output 38

    tnx
    any other idea...
    i've also read about resetting pram. is it dangerous?
    m

  • RELEVANCY SCORE 2.80

    DB:2.80:Pavilion Dm3 Built In Mic Doesn't Work 1d



    I use a softphone with a headset with no problem, but if I try to do a skype/VoIP call without the headset the external mic doesn't pick up any sound. I've even tried simply recording myself with the Windows recorder and nothing. Any idea why my internal mic doesn't work?

    DB:2.80:Pavilion Dm3 Built In Mic Doesn't Work 1d


    I had the same problem. I fixed it by making the internal mic preferred in Skype.

    Open Skype.

    Tools

    Options

    Audio Settings

    Show Advanced Options

    I had three choices under microphone and selected the Internal mic, moved it to the top of the list and hit save.

    Hope this works for you too.

  • RELEVANCY SCORE 2.79

    DB:2.79:Multiple (Simultaneous) Audio Output Options? k7


    Is there a way to get the audio to output from BOTH the "Built-in Audio" and another device (such as a MOTU 828mk2 Firewire Audio Interface)? I've tried creating an Aggregate Device in Audio MIDI Setup but that didn't work. (It seems to be fine for inputs but not outputs.) I just want identical audio (such as iTunes music) available from more than one output at the same time. Any ideas or help is greatly appreciated!

    Brent

    DB:2.79:Multiple (Simultaneous) Audio Output Options? k7

    Malcolm,

    I found the "4FX Effect: Auxiliary Device Output" and that worked just how I needed it to! Thanks so much for the suggestion. I just wish this was something Apple would implement in their sound control panel or Audio MIDI Setup. I'm sure there are others out there that want/need this functionality.

    Thank you again!

    Brent

  • RELEVANCY SCORE 2.79

    DB:2.79:Speaker Output? ac


    Is there an application or way for me to be able to use the headphone jack AND the computer built in speakers at the same time? I purchased some $10 speakers that plug into the audio jack and work fine. but to achieve maximum capability, I was wondering if while the external speakers are playing, I could also use the built in internal speakers as well.

    DB:2.79:Speaker Output? ac

    Is there an application or way for me to be able to use the headphone jack AND the computer built in speakers at the same time? I purchased some $10 speakers that plug into the audio jack and work fine. but to achieve maximum capability, I was wondering if while the external speakers are playing, I could also use the built in internal speakers as well.

  • RELEVANCY SCORE 2.79

    DB:2.79:Macbook Audio To Hdtv 8m


    Have MacBook late 2008. Got Moshi Mini DP/HDMI adapter. Did set up and get video but no audio. Checked Audio (Built in) no HDMI Output or HDMI/Display Port Output listed. How can I get audio on this MacBook?I was also told by the Mac specialist the adapter would work!! I simply want to watch internet tv from the MacBook on my Samsung HDTV but it seems I have to be an F1 racing engineer to solve a simple problem. Can somebody help and share a simple workaround.Thanks,

    DB:2.79:Macbook Audio To Hdtv 8m

    I missed the model restrictions on that Kanex converter. So back to the statement I made just above it. The restrictions are what they are. Analog stereo or digital 2-channel through the video/usb combiner.

  • RELEVANCY SCORE 2.78

    DB:2.78:No Built In Audio In Sys Profiler, Sys Prefs Shows No Output Device. 7f


    Erased and reinstalled, reset smu and pram.Was suggested I use USB speakers but how could that work without a working sound card.Any suggestions?

    DB:2.78:No Built In Audio In Sys Profiler, Sys Prefs Shows No Output Device. 7f

    Erased and reinstalled, reset smu and pram.Was suggested I use USB speakers but how could that work without a working sound card.Any suggestions?

  • RELEVANCY SCORE 2.78

    DB:2.78:Smartconnect Doesn't Work With Bluetooth Speaker j9



    I have bought a Blaupunkt bluetooth speaker. It's working well with my Nokia E6. However, when I tried with my Xperia E, bought a week ago, its paired, but doesn't transfer the output to that. Instead, it uses built in speaker. I tried the Bluet tooth devices option with smart connect, it doesn't show bluetooth speaker.

    I thought, its a problem with smartconnect. I disabled that and tried directly with walkman. Still same problem. How to make it work?

    DB:2.78:Smartconnect Doesn't Work With Bluetooth Speaker j9


    Please check with the manufacturer of the speaker to ensure that it supports the A2DP Bluetooth profile the handset uses to stream stereo sound via Bluetooth.


    What are your thoughts about this forum? Let us know by doing this short survey.





    - Official Sony Xperia Support Staff

    If you're new to our forums make sure that you have read our Discussion guidelines.If you want to get in touch with the local support team for your country please visit our contact page.

  • RELEVANCY SCORE 2.78

    DB:2.78:Built In Mic.Does Not Work 7f



    built in MIc. does not work

    DB:2.78:Built In Mic.Does Not Work 7f

    hartywain wrote:
    built in MIc. does not work

    Hi,

    What is your machine and its Operating system ? Please try this first to enable Speakers in Playback devices as follows:1. Right click speaker icon (right hand corner)2. Select Playback devices3. Right click Speakers4. Enable it and set as Default5. Click Apply/OkRegards.

  • RELEVANCY SCORE 2.77

    DB:2.77:Ps3 Audio Hdmi Monitor Audio Port Doesn't Work xp



    I tried setting up my PS3 today, hooking up my Launch 60GB PS3 to my computer monitor (Dell SX2210T)through HDMI. After doing this, I tried hooking up my headphones (one 3.5 mm audio port, no microphone) to my Launch 60 GB PS3. There is no direct audio port on the PS3 so I tried hooking it up into the audio out port on my computer monitor and set the sound to output through HDMI. This is the same setup that works perfectly on, that other console, but I can't get any audio from my PS3. I tried resetting the ps3, setting the audio to HDMI Automatic again, but I can't seem to get any audio at all. Any ideas as to what I should do now?

    DB:2.77:Ps3 Audio Hdmi Monitor Audio Port Doesn't Work xp


    I turned off Audio Muti Output and restarted the PS3 and it randomly works, Disregard this question I guess.

  • RELEVANCY SCORE 2.77

    DB:2.77:Audio Output d8


    The built in loudspeakers doesn't work anymore. The system preference, audio out-put, says "digital out-put optical", there are no other voices in the list.The Audio Output socket has a turned-on red light inside. It works with earphone, but after I removed these seems that it's working the optical digital output.I haven't found information about how to switch from optical to built in loudspeakers. Is it possible that I've a broken component?

    DB:2.77:Audio Output d8

    Hi, and welcome to Apple Support Communities.Have you tried resetting the PRAM? That sometimes does the trick.

  • RELEVANCY SCORE 2.77

    DB:2.77:Voice Over Tool With Dv Audio Problem. 1f


    Hello,

    I have a mic hooked up to an XLR input on my Canon XH-A1. The camera is connected to the computer using firewire and works correctly for log and capture and whatnot. I need to record sounds in real time using the Voice Over function in FCP. I set the audio input to "DV Audio" and it gives me this error message:

    +"The selected sound input device is unavailable. It may be in use by another application, disconnected or improperly connected, or may be conflicting with a video output device."+

    I have closed all programs that may use the camera, such as iChat or Quicktime. It still does not work. Also, I have video output set to "None" and Audio output set to "Built-in Audio" so I don't think there should be conflicting video output problems.

    Any ideas? Any help would be appreciated. Thanks!

    DB:2.77:Voice Over Tool With Dv Audio Problem. 1f

    Thanks for all the replies... I'll keep trying.

    I may just use the Built-in Input but I would love to use this feature at one point if I can get it to work.

  • RELEVANCY SCORE 2.76

    DB:2.76:Audio Output No Longer Works ak


    I have a new Mac Mini that I got up and running about a month ago. A couple of weeks ago I installed a bluetooth device, a headset I also use with my celular phone, to use with Skype. So far so good....but when I tried for the first time to fire up GarageBand, sound output was setup to go through the headset. So in preferences - audio output, I selected "Built-in audio". From this moment on I haven't had any audio output at all. I turned off the headset, restarted GarageBand, and got "bluetooth audio failed", tried a reboot, tried deleting the bluetooth device and turning off bluetooth, rebooting again, and still no audio. Other audio applications work fine--sound from games, media, etc. come out the built-in audio. But Garageband still is silent. In the preferences there are no more references to the bluetooth hardware in the drop-down lists for the audio devices.

    Does anyone know how to fix this? I have been searching the discussions and Apple knowledge base artices for a while and can't find anything.

    This is GB version 2.0.2 (50).

    Thanks for any help!

    Bill Nassauer

  • RELEVANCY SCORE 2.76

    DB:2.76:Audio Lost Through Firewire 8s


    If we send video out through firewire then we get the video signal but no audio, then when we change video output to none, audio returns via built-in audio. How do we get the audio to stay on when outputting video to Firewire (audio goes off when output to Desktop Video as well). This is with projects sent from FCP to STP. FCP audio plays fine through Firewire.

    DB:2.76:Audio Lost Through Firewire 8s

    Ok I have got audio now playing with both screens playing video. The answer seemed to be to export the sequence from the browser in FCP using the right click options and Export For Soundtrack. I made the movie self contained. This file can then be imported into a new project in ST.

    The manual suggested using the Send To ST multitrack project option which creates a ST project file for you, but as found before then the audio won't play when using video out..

    Either this is a bug or maybe has something to do with the export file format, either way it's a bit shabby.. and I still can't get to see the timecode hud over the video out display..

  • RELEVANCY SCORE 2.75

    DB:2.75:Built-In Speakers Don't Work zd


    I can get audio over my external speakers and headphones, but not over my internal speakers. Am i missing a setting? The only setting in preferences is digital audio output port.

    DB:2.75:Built-In Speakers Don't Work zd

    After long searches l stumbled to your response shldr2thewheel, so seem to have helped me more than twice so far. Thanks this also helped me with an issue l got just today

  • RELEVANCY SCORE 2.75

    DB:2.75:Kt3 Aru Prob Direct Soubnd Digital Coax p1




    Audio prob with KT3 ARU
    2 prb
    I plug the S Pdif Coax outpout to my onkio Se 600
    I have sound with application like winamp or Windows media player, but i dont have the system sound.
    I only have them when winamp playing.

    I also have prob with soundman when i choose 6 speeker. When i test the speeker, i only have the front speeker playing. The central rear and sub doesn t work.

    Do some one test to plug digital audio amplifier to the coax digitial audio output ok the main board ?
    Do Direct sound work ?

    I have le lastes audio driver on my Windows XP

  • RELEVANCY SCORE 2.75

    DB:2.75:Flash Internet Video, No Audio : Fixed kf


    I've seen a variety of posts lately about no audio from Flash video, e.g., YouTube videos with no sound.

    Some users have fixed the problem by trashing ~/Library/Macromedia or incompatible plug-ins. None of that worked for me, but a simple fix from the Flash support team did work.

    Run Applications/Utilities/Audio Midi Setup. Click the "Properties For" popup and choose Built-in Output. Set the Format field to 44100 Hz. Close the program.

    This field was set at 96000 Hz on my system. (By Flip4Mac maybe?) Changing the setting restored Flash audio.

    Good luck,

    John

    DB:2.75:Flash Internet Video, No Audio : Fixed kf

    OK. I missed the Intel-Mac notation. BTW, I didn't think there was an Intel-Mac compatible Flip4Mac version. Since I don't own one, I haven't really been keeping track.

  • RELEVANCY SCORE 2.75

    DB:2.75:Dts Audio Doesn Not Work On Samsung Devices 9c


    Hi ,

    I downloaded a DTS video , video played very well but audio was not working . I get the mesage This audio codec is not supported.
    I downlaoded Mx playuer from play store ,but this was also not able play the audio . Dts audio will not work on samsung phone .?

    DB:2.75:Dts Audio Doesn Not Work On Samsung Devices 9c

    Yup the bulti-in player won't accept DTS audio as it don't have proper decoder with DTS which mostly come from a Blu-ray or DVD disc.
    Try some third parthy player app, or just convert the audio to some common codec like AC3 or AAC.

  • RELEVANCY SCORE 2.75

    DB:2.75:Built In Mic Doesn't Work On Envy X2 ca



    Hi. I have an Envy X2 running Win8. All is fine except the built in mics are not hearing anything. I have tried the obvious - checking the level in the control panel and making sure it is not muted - without any success. Where to from here?

    Thanks

  • RELEVANCY SCORE 2.75

    DB:2.75:How Do I Get My Built-In Speakers To Work Again x3


    I recently had my built-in speakers stop working less than a year after purchasing my MacBook Pro 15". About 24hrs ago, my built-in speakers were working fine. At some point, I was using my bose headphones, and after I unplugged them, my speakers did not work. I've confirmed that the sound is not muted. I have sound visible on the desktop bar, but it is grayed out. I looked on my system preferences for audio output, and my speakers are not listed as an option. Only optical digital-out is an option besides my Apple TV.

    DB:2.75:How Do I Get My Built-In Speakers To Work Again x3

    Hello, I have the same problem here on my Late 2011 17" MBP.But resetting the PRAM didn't help it, nor wiggling headphones in the port.Any ideas to get that fixed. I get perfect sound on headphones, and the speakers are obviously working perfectly, because the MACs startup boooong is comming loud and clear.And right now, short after, trying to plug in a iphone microphone and control capable headphone into the jack helped it. But I get this problem every now an dthen.What could be done about this?

  • RELEVANCY SCORE 2.75

    DB:2.75:How Do I Change My Built-In Audio Output Source sz


    I went to Audio MIDI Setup and I need to change my Built-in audio source from 'Digital out' to 'Internal Speakers'

    DB:2.75:How Do I Change My Built-In Audio Output Source sz

    I went to Audio MIDI Setup and I need to change my Built-in audio source from 'Digital out' to 'Internal Speakers'

  • RELEVANCY SCORE 2.75

    DB:2.75:Mediasmart Mvp Software Doesn't Load On Dv7 - Windows 7 64 Bit ac



    I have a dv7 running w7 64 bit. Tried to watch a movie DVD. Didn't work. Headphone jacks (is each one stereo?) didn't work. Used one of the built-in HP advisor (or whichever) to download MediaSmart MVP, but install started, seemed to work. However, when I re-ran the HP advisor, needing MediaSmart MVP kept appearing. The install didn't mention turning off firewall. Nice computer that (currently) doesn't run movie DVDs. At least youtube works.

    DB:2.75:Mediasmart Mvp Software Doesn't Load On Dv7 - Windows 7 64 Bit ac


    Did a less fancy install from the HP page offering many downloads for my specific dv7, also installed the media player from that page. The automated evaluation function didn't work so I just downloaded this and that. Movie DVD is now playable.

  • RELEVANCY SCORE 2.74

    DB:2.74:Hdmi Audio On Lenovo L540 Not Working zz



    I am trying to get HDMI output to work on a Lenovo L540 through the Mini DisplayPort to an HDMI output, and I am getting video but am not getting audio output. I opened Pulse Audio Audio control (pavucontrol) and under Output Devices, it recognizes that HDMI/ DisplayPort is plugged in. I can run a video in VLC and set pulse audio to put the audio on Built-in Audio Digital Stereo HDMI and the volume activity bar is moving, but there is no output

    Here is the output for cat /proc/asound/cards
    0 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xf2534000 irq 46
    1 [HDMI ]: HDA-Intel - HDA Intel HDMI
    HDA Intel HDMI at 0xf2530000 irq 48
    29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
    ThinkPad Console Audio Control at EC reg 0x30, fw unknown

    DB:2.74:Hdmi Audio On Lenovo L540 Not Working zz


    I did manage to get hold of hdmi cable for a short period of time, so I tested my setup. I used iecset before to set proper signal format, so that step was not necessary. Using a hd4850 with fglrx on arch x64 I did not have any special properties for audio using xrandr, however I did not test is extensively. Once unmuted audio worked over HDMI when proper format and number of channels was set without any distortions. Did you made any progress?

  • RELEVANCY SCORE 2.74

    DB:2.74:Audio / Sound Issues - Using Imic With Macbook Pro az



    Griffin's iMic seems to behave oddly with VMware fusion - running XP Pro on a MacBook Pro with Leopard.

    After XP is woken up from standby mode, audio output doesn't work in XP while it does on Leopard. If I tell Leopard to output audio on the built in speakers though rather than through iMic, audio in XP behaves normally.

    The bug goes away when I shut down the virtual machine and shut down Fusion and restart, but this issue didn't exist before I upgraded to Leopard...

    Any ideas?

    DB:2.74:Audio / Sound Issues - Using Imic With Macbook Pro az


    I have simillar issue on a Macbook (Late 2007) with Leopard. After susupending Macbook and resuming it, Fusion's audio output doesn't work with iMic.

  • RELEVANCY SCORE 2.73

    DB:2.73:Exporting Audio To Movie, Doesn;T Export The Audio 3x


    When I try OptionMovieExport Audio to movie It rendereds but doesn't actully put the music into the video. Worked in 7.1 doesn;t work in 7.2.1 any plans on fixing this?

    DB:2.73:Exporting Audio To Movie, Doesn;T Export The Audio 3x

    I'm also hoping to get a little help with this topic. I tried to export audio onto a movie in LP 7.2.1 on a G5. I set the locators for the duration of the clip I needed and then Exported Audio to Movie. It asked for sample rate, bit rate, mono/stereo and then for a file name to save the movie as. All looked fine and it even appeared to export fine.

    The resultant file in my target folder was the entire movie (58 mins and not the 1 min clip I'd exported, with the sound the correct duration but playing a full tone lower in pitch (usually the result of a 48k file played at 44k). The sample rate in LP was set to 44k as was my export option.

    Can anyone explain why this might have happened ?

  • RELEVANCY SCORE 2.73

    DB:2.73:Hp 4-1195ca No Audio Output Device (Beats Audio) 3z



    While using my laptop today on itunes the audio on my built in speakers stopped working. I now have no audio and no speaker playback devices, and troubleshooting audio problems can not identify the problem. The sound icon in the bottom lefthand corner shows the mute symbol but attemting to take off mute changes nothing and clicking the icon just launches the troubleshooter. I have tried a system refresh which did not work. How would i re install the proper audio output device.

    DB:2.73:Hp 4-1195ca No Audio Output Device (Beats Audio) 3z


    Hi Joeharry13,

    Welcome to the HP Forums!

    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.

    i grasp that while playing ITunes your speakers quit. You have verified that the speakers are not muted and the Windows troubleshooter does not identify the problem. You would like the audio driver for you notebook.

    Here is a link to HP ENVY TouchSmart Ultrabook 4-1195ca Drivers. You will need to select your correct Operating System and click next to display a list of recommended drivers for you notebook.

    Have you run The HP Support Assistant to help with HP updates and resolving issues.

    Here is a link to a document on No Sound from Speakers (Windows 8), that may also assist.

    If you connect an external speaker does it work?

    Please let me know the outcome and have a terrific day!

  • RELEVANCY SCORE 2.73

    DB:2.73:Can I Monitor Via Built In Audio Using Presonus Firebox In Logic Pro 7? f8


    New to the forum and apologies if this is answered already.

    I installed a Presonus Firebox but am unable to monitor output using built in audio

    Self powered speakers are connected to the G5 audio output jack and working w/other application such as iTunes

    Firebox is connected to G5 using the front Firewire port

    The synch light on the Firebox is blue indicating proper connection and synchronization with the G5

    Core Audio enabled in Logic Pro 7.0.1 preferences

    Have experimented with "Sofware Monitoring" (on and off) and see my level meters reacting to both microphone and 1/4" guitar input but no output to speakers!

    Apple System Preferences Sound Input is set to "Firebox" Output is Line Out - Built-in Audio

    I can monitor by connecting speakers or headphones to headphone output on the Firebox but have an unacceptable latency and in any case don't wish to monitor this way - Presonus tech support closed on the weekends and I need to work today.

    Any help is highly appreciated!

    regards -

    DB:2.73:Can I Monitor Via Built In Audio Using Presonus Firebox In Logic Pro 7? f8

    FYI - Everybody - I called Presonus tech support and I cannot monitor using built in audio and also monitor the input to the Firebox - as I suspected I can have one or the other but not both.

    Best regards and thanks for trying to help me out

  • RELEVANCY SCORE 2.72

    DB:2.72:Video 3f


    I can download video to my ipod but the audio doesn`t work. What can I do to solve this problem. PLEASE HELP!!!

  • RELEVANCY SCORE 2.72

    DB:2.72:Qip-7216 Linear Pcm Audio Doesn't Always Work 1a



    Ok so my setup is with the HD DVR model 7216 hooked up to my audio/video receiver via HDMI. One day I was just playing around and noticed that when I hit the "Fios TV" button in the middle of my remote that the audio sometimes switches to a Linear PCM signal output. My problem is that it doesn't output that signal by default, and if it is in Linear PCM and I accidently hit the FIOS TV button and the PCM switches off, I can't always get it back. Do I have a bad box or is there a setting to fix this that I can't find?

    DB:2.72:Qip-7216 Linear Pcm Audio Doesn't Always Work 1a


    There have been a number of documented problem with HDMI in the 7216. I've had all sorts of trouble using it with a Sony receiver, TV, and Blu-ray player. In my case, the 7216 appears to interfere with HDCP handshaking between components. This causes the devices to switch from 5.1 or 7.1 channel audio to only 2 channel. The best example I have is that if the 7216 is plugged into the receiver via HDMI then my Blu-ray player will only output 2 channel audio. This is under IMG 1.7. I finally gave up and switched to component cable and digital audio cable from the 7216 to the receiver.

  • RELEVANCY SCORE 2.72

    DB:2.72:My Built In Microphone Doesn't Work ja



    I have an HP G71-340US Notebook. The built in Microphone isn't working. I've tried uninstalling then re-installing the sound card driver but it's just like it doesn't exist. It will offer to do the set up but when I hit the record button, it offers the signal bar but shows nothing hapenning on it. Almost like the microphone is unplugged and the laptop doesn't realize it.

    Thanks for any advice.

    DB:2.72:My Built In Microphone Doesn't Work ja


    my internal microphone is not working. the audio device listed in the control panel does not show internal microphone. only the external microphone and the sterio mix are their. do i have to reinstall the internal microphone? how do i do it?

  • RELEVANCY SCORE 2.72

    DB:2.72:Built In Microphone Doesn't Work. fk



    So I was going to skype with my friend the other night and I wanted to use the internal microphone, but instead it didn't work and had to use a headset. The speakers works and also the webcam. Audiocard would be conexant instead of realtek. I have tried everything, from disabling the microphone and enabling it again, downloading the latest drivers again and installing them. Hopefully someone has a solution to this.

    Thanks in advance

    DB:2.72:Built In Microphone Doesn't Work. fk


    Only way to tell for sure whether it's due to software is to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media.

    You can create an image ofthis disk on an external drive and restore it to the current contents later.

    Back up your programs, system settings, and files

    Restore your computer from a system image backup




    -Jerry

  • RELEVANCY SCORE 2.72

    DB:2.72:Audio Output Will Not Work On External Speakers.&Nbsp; Internal Speakers Will Work.&Nbsp; What Do I Do To Replace Audio Output Slot km


    audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

    DB:2.72:Audio Output Will Not Work On External Speakers.&Nbsp; Internal Speakers Will Work.&Nbsp; What Do I Do To Replace Audio Output Slot km

    audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

  • RELEVANCY SCORE 2.71

    DB:2.71:Why My Audio In Hp Mini 110-3014tu Doesn't Work To Linux?? 8m


  • RELEVANCY SCORE 2.71

    DB:2.71:My Built-In Audio Output Doesn't Work ks


    Hi,I just noticed my built-in audio output doesn't work anymore. I've tried all sorts of headphones, but none of them seemed to work. Right now I'm using an external USB soundcard, but I'd really like to figure out what happened here. I haven't installed, upgraded or updated anything at all: it just happened. Do you guys have any suggestions about this? What kind of data should I look for to help debug?

    DB:2.71:My Built-In Audio Output Doesn't Work ks

    Hi,I just noticed my built-in audio output doesn't work anymore. I've tried all sorts of headphones, but none of them seemed to work. Right now I'm using an external USB soundcard, but I'd really like to figure out what happened here. I haven't installed, upgraded or updated anything at all: it just happened. Do you guys have any suggestions about this? What kind of data should I look for to help debug?

  • RELEVANCY SCORE 2.71

    DB:2.71:No Volume Control For Fw Sound Card mf


    I am using the firewire sound card that uses Core Audio standard driver.

    The card is fully functional but volume control is not working even if I set it as default device for input/output. Volume control works for built-in audio.

    It would be nice to know how the OS X volume control is designed to work.

    Thanks.

    DB:2.71:No Volume Control For Fw Sound Card mf

    Sure, but in this regard there is no difference between built-in sound and external.
    I both cases sound is finally written in sound card registers, which are fixed point, but main volume control is built into the system and has to work with floating point, there is no other way.
    Internal and analog audio output is not just a D/A converter going to a fixed gain amplifier. They probably use a multiplying converter. Thay have two digital inputs. One sets the voltage for the main D/A converter. The number of output steps, thus is not reduced at low volume.

  • RELEVANCY SCORE 2.71

    DB:2.71:Built-In Mic Not Recognized, Xp Sp3 37


    The built-in mic is not recognized or working on my Satellite A215-S4757 running Windows XP, SP3, with latest updates.
    Audio Codec:ALC268
    Realtek HD Audio
    Driver Date 7/28/2010
    Driver Version 5.10.0.6167
    Sounds and Audio Devices Properties
    Master Volume: Master Volume, Wave, SW Synth, CDPlayer, PC Beep
    Options, Properties: Mixer Device dropdown has Realtek HD Audio Output and Realtek HD Audio Input
    Output has Master Volume, Wave, SW Synth, CDPlayer, PC Beep
    Input has Mic Volume, Stereo Mix
    Mic volume only seems to work with an external mic.
    Is this a feature of Realtek or a misconfiguration on my part?
    Thanks,
    Steve

    DB:2.71:Built-In Mic Not Recognized, Xp Sp3 37

    The built-in mic is not recognized or working on my Satellite A215-S4757 running Windows XP, SP3, with latest updates.
    Audio Codec:ALC268
    Realtek HD Audio
    Driver Date 7/28/2010
    Driver Version 5.10.0.6167
    Sounds and Audio Devices Properties
    Master Volume: Master Volume, Wave, SW Synth, CDPlayer, PC Beep
    Options, Properties: Mixer Device dropdown has Realtek HD Audio Output and Realtek HD Audio Input
    Output has Master Volume, Wave, SW Synth, CDPlayer, PC Beep
    Input has Mic Volume, Stereo Mix
    Mic volume only seems to work with an external mic.
    Is this a feature of Realtek or a misconfiguration on my part?
    Thanks,
    Steve

  • RELEVANCY SCORE 2.71

    DB:2.71:Hp Paviliong7 Laptop Headphones Internal Speakers Both Work At Same Time 1k



    Windows 7 32/64 bit. I accidentally put my headphones in the "mic" output now when I put my headphones in the headphones output - I hear sound from both headphones and built in speakers at the same time. How do I mute internal speakers when using headphones?

    DB:2.71:Hp Paviliong7 Laptop Headphones Internal Speakers Both Work At Same Time 1k


    You can go to www.hp.comand select support/Download driver. Choose your platform, then download the latest audio driver.

    If it still don't work, please contact HP service centerto get more support. Thanks!

  • RELEVANCY SCORE 2.70

    DB:2.70:Digital Output Doesn't Work On Y550 Laptop 3f


    Hi,I have just purchased Lenovo Laptop Y550, it has Realtek audio card, whenever I change the output to Digital, audio output doesn't work, only stereo works, when I start the Realtek HD Audio Manager in the Speaker Configuration, the drop down to change the configuration is disabled. Even when I go to Digital Output tab and change it to Digital output,there is no output.Please suggest if I am missing anything.Thanks Regards,Ravi.

  • RELEVANCY SCORE 2.70

    DB:2.70:Default System Output Wont Stay On Built-In Line Output.... kj


    anyone have any idea why it is that when i select built-in line output from audio midi setup and close the program it goes back to built-in output?

    i have a digi003 audio recording interface and i cant select that and have it stay either...

    DB:2.70:Default System Output Wont Stay On Built-In Line Output.... kj

    anyone have any idea why it is that when i select built-in line output from audio midi setup and close the program it goes back to built-in output?

    i have a digi003 audio recording interface and i cant select that and have it stay either...

  • RELEVANCY SCORE 2.70

    DB:2.70:Audio Interface Connection Issues - Growing Very Frustrated! xs


    Hi there,I'm having a **** of a time with a very basic recording set-up. I'm using an M-Audio Fast Track with Logic Pro 9. I have a digital stage piano which is connected via USB to my macbook pro, but I am also connecting one of the audio output ports from my piano (a Kawai MP5) into the audio interface device. Basically I want to take advantage of the software instruments, AND some of the built-in piano sounds of my digital piano. My set-up is like this: the audio interface device is connected via USB to my macbook pro. My piano is also connected via USB to the macbook pro. My piano has another connection going into the audio interface device. I want to be able to hear ALL audio via the headphone output on the macbook pro. I have the audio settings within Logic Pro set up such that the audio input device is the Fast Track, and the audio output device is the built-in output of the macbook.Within Logic Pro, I create a real instrument track, and I have it record enabled, BUT - I cannot hear anything coming through. The signal indicator on the Fast Track lights up whenever I play the piano...but I do not hear anything in my headphones (connected to the macbook's built-in output). If I create a software instrument track, I have no problem hearing anything.Would somebody please PLEASE tell me how to connect my devices or adjust settings so that I can hear my piano within Logic Pro? Technically, the way I have connected everything should work from the way I see it. I don't know if I have to have a monitor enabled or disabled somewhere in order to hear the piano, but I have been playing around for over an hour now trying to get sound to come through with no success.Thanks.

    DB:2.70:Audio Interface Connection Issues - Growing Very Frustrated! xs

    There are Audio track types Mono (one meter) Stereo (two smaller parallel meters) They can be changed using the small circle(s) at the bottom of the channel strip under the meter. It's self explanatory once you click on the circle.The Inputs reflect your audio Interface. I assume Input 1 is your Mic Input, Input 2 is your guitar input... If you use a stereo track you will probably see Input 1-2 which means both inputs are being monitored... If your guitar is plugged into Input 2 you will only hear one side.My audio interface has 8 inputs so I if I'm choosing inputs for a stereo strip I see pairs.. 1-2, 3-4, 5-6, 7-8. If I choose inputs for a mono track I see 8 individual inputs. If I have in instrument plugged into channel 1 I will only hear sound if the inputs have 1-2, or 1. If it's a stereo track it will be on one side only.And you have the pan adjustment.. pan left, pan right, pan center. Use Logic online help for some quick hints

  • RELEVANCY SCORE 2.70

    DB:2.70:Using Onenote Audio Record With Internal Built-In Notebook Microphone jx


    Hi,

    When I use Onenote to record audio with an external microphone I could obtain a clear and quality voice sound.

    Besides the internal (built-in) notebook microphone not provide the better quality record by "nature", it is useful to record a meeting or a little work group chatting. But I couldn't obtain a reasonable record. The output is terrible!

    Does anyone have any tip to use Onenote audio record with internal notebook microphone in other to obtain a reasonable audio quality?

    Thanks in advance,
    Cadu

  • RELEVANCY SCORE 2.70

    DB:2.70:No Audio From Quicktime Videos m1


    I have a MacBook Pro running 10.4.6 and Quicktime 7.1.3. When I play QT videos there is no sound, however iTunes and system sounds work fine. I checked Audio MIDI Setup as suggested in another post, and the Audio Output section says "Output is not supported". The Sound widget from System Preferences shows it's using the Built-in output, and as mentioned above, iTunes and others play just fine. Any ideas why Audio MIDI Setup says no output?

    DB:2.70:No Audio From Quicktime Videos m1

    think everyone has the same issue.Why don't they just do a normal quicktime video?
    So Glad its not just me

    Help APPLE

  • RELEVANCY SCORE 2.70

    DB:2.70:Macbook Pro 13 (2010) -Mini Displayport To Hdmi Cable - No Audio xc


    I have a brand new mini displayport to HDMI cable to connect my macbook pro 13 to my tv (LG). The connection seems to work fine, video is mirrored etc no problem. I cannot however get any sound to play through the TV. I have been through sound settings and HDMI output does not appear in the output list - only "internal speakers - built in) appears.

    On the "about this mac" detailed page and on the "audio (built in)" tab on the left, my mac says it has HDMI displayport output.

    I have read some reviews on here that say my macbook pro 13 has the capability to output audio through the cable I have.

    There must be a solution to this without me having to buy more cables

    Can anybody help please????

    Swordsman

    DB:2.70:Macbook Pro 13 (2010) -Mini Displayport To Hdmi Cable - No Audio xc

    Thanks for the help. I found another solution. I reset the SMC while the headphone cable was still plugged in. It worked fine

  • RELEVANCY SCORE 2.70

    DB:2.70:No Input? j9


    When I use logic express, it tells me it can't find the built in audio input, thus it gives my no option to record audio. In the audio hardware and drivers preferances, it only gives me the option of built in audio output. Anything can do to solve this?

  • RELEVANCY SCORE 2.70

    DB:2.70:My Sansa E260 Audio Output Doesnt Work Help zm


    Model: sandisk sansa e260Problem: when ever i plug my head phones or anything else into my mp3 player it doesnt output audio ive tried plugging in multiple headphones but i dont get any audio output any help?

    DB:2.70:My Sansa E260 Audio Output Doesnt Work Help zm

    Turn the volume up?There is a link to the instruction manual below.Check the headphones on another stereo or whatever to make sure they work-If you can't get it to work still the mp3 player is probably broken- call their tech support to troubleshoot and/or return it.



    -Will-One e260, one e260v2, an e250R, Three e250s. www.rockbox.orgTwo Clips.

  • RELEVANCY SCORE 2.70

    DB:2.70:Dts Audio Doesn Not Work On Samsung Devices 3m


    Hi ,

    I downloaded a DTS video , video played very well but audio was not working . I get the mesage This audio codec is not supported.
    I downlaoded Mx playuer from play store ,but this was also not able play the audio . Dts audio will not work on samsung phone .?

    DB:2.70:Dts Audio Doesn Not Work On Samsung Devices 3m

    Yup the bulti-in player won't accept DTS audio as it don't have proper decoder with DTS which mostly come from a Blu-ray or DVD disc.
    Try some third parthy player app, or just convert the audio to some common codec like AC3 or AAC.

  • RELEVANCY SCORE 2.69

    DB:2.69:Issue With Hdmi Audio Output f1


    I have two devices, an HDTV and a monitor w/built in speakers, connected to my computer with HDMI cables. My video card iscapableof HDMI audio output. I go to the playback devices manager and it says there are two HDMI audio devices. Now, one
    would think I could use HDMI out for sound with these facts. There is one problem: the computer thinks no HDMI device is connected. How do I get the stupid thing to work?

    DB:2.69:Issue With Hdmi Audio Output f1

    Please focus on this thread:
    http://social.technet.microsoft.com/Forums/en-US/w7itprohardware/thread/c2034a6c-5412-474c-ab81-fa2de8e632d6 . It could
    help the other communities who encounter the similar issue.

    Regards,
    MiyaThis posting is provided AS IS with no warranties, and confers no rights. | Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer
    your question. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.69

    DB:2.69:Audio Output??/ xk


    So i know the MBP has headphone output and optical audio output, but can i get it to output to line out? In that it would be analog line out, not digital, so i can hook up external speakers without the built in volume control?

    Thanks

    DB:2.69:Audio Output??/ xk

    the audio i/o connectors on the MBs and MBPs are multi -purpose.

    if you plug in headphones to the output, it works as a headphone output.

    if you plug in a stereo minijack cable with whatever connection you need at the other end, you can use it as a stereo line out to connect to a hifi system. set the volume to maximum and leave it there to get the best signal to noise ratio, and then use your hifi's volume control to control the overall level as you would with any other device.

    if you plug in a toslink cable, the output with give you a stereo digital sp/dif signal. if you need to use this, then you will already know what it means and how to use it. if not, then you probably don't need it.

    bear in mind that the 'line out' analog (or headphone for that matter) is never going to be the greatest quality. it's got a pretty poor converter, and if you are an audiophile, you will probably hear the RF interference that comes from the internal workings of the computer. if you're after best quality, then you'll need either a 3rd party audio interface of some type, or you'll need to use the outputs as optical sp/dif, for which you'll need a converter.

    any questions?

  • RELEVANCY SCORE 2.69

    DB:2.69:Acer Asipre 774-6656 Audio Jack Doesn't Work dc



    I have a Acer Asipre 774-6656 WIndows 8.1 64 bit notebook.

    The audio output jack on left side does not work.

    I hav edone the troubleshooting in windows for sound proeblem - no help.

    I don't see a realtek sound card listed in device manager and I believe it is in the original specs fo rthis notebook.

    I get sound fom the notebook speakers.

    Have gone to control panel sounds and tried all the available adn even have disabled and disconnected devises noted to show.

    I have tried a couple of speakers in the output jack tha twork on other notebooks - not the external speaker.

    Any suggestions woudl be helpful.

    I won't spend the money to replace the output jack - but would think this is a real long shot as the problem.

    Thanks and Happy New Year.




    HNP_OB

    DB:2.69:Acer Asipre 774-6656 Audio Jack Doesn't Work dc


    HNP_OB,

    I know you have tried almost everything but if you haven't already, try restoring the computer to factory defaults. I am only suggesting this because it seems like you have done every thing I would have suggested. Understand this will cause you to lose data, so please make sure you back up all your files.

    If the problem still persists, then it would very likely be a bad audio jack.





    Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

  • RELEVANCY SCORE 2.69

    DB:2.69:Sony Vaio Sve14113elw My Built Camera Doesnt Work After Installing Windows 8 pz


    I have a Sony Vaio SVE14113ELW my built camera doesn´t work after installing Windows 8 please your help. Everything else is OK

    DB:2.69:Sony Vaio Sve14113elw My Built Camera Doesnt Work After Installing Windows 8 pz

    Hi VictorHugo2040,
    You want to know why the built in camera is not working after installing Windows 8. I will help you with this issue.

    Method 1.
    Run the troubleshooter and check if that helps.
    Follow these steps:
    a) Press the ‘Windows + W’ key on the keyboard.
    b) Type troubleshooter in the search box and then press enter.
    c) Click hardware and sound and run the Hardware and Devices Troubleshooter.
    d) Follow the On screen instructions.

    Method 2.
    You may download the drivers from this link and check if that helps.
    http://esupport.sony.com/LA/p/model-home.pl?mdl=SVE14113ELWLOC=3#/downloadTab

    Method 3.
    You may try to install the driver in compatibility mode and check if that helps.
    Install the driver in Windows 7 compatibility mode:
    To install the driver in Windows 7 compatibility mode, right-click on the setup file
    of the driver and then click on ‘Troubleshoot Compatibility’ and select Windows 7 to follow the prompt.
    Hope this helps.

  • RELEVANCY SCORE 2.69

    DB:2.69:Audio Jack Works Every Other Time, Yoga 2 Pro 3f


    This seems to me the strangest thing: On my Yoga 2 Pro, ever since I got it, the audio mini jack output (well, and input, there's only one jack for both mic-in and audio-out) only works every other time I turn on my computer.It's like this: I'm listening to music or watching a movie with sound coming from the built-in speakers. Then I plug in earphones so as not to disturb others, except there's no audio output to the earphones. The computer says "You just pluggd a device in the audio jack" but there's no audio coming from the headphones. I unplug them and audio is once again playing out loud from the built-in speakers.Ok, so I restart the computer, and the audio jack works fine, I get audio in my headphones. Then when I turn off my computer and turn it on again, the audio jack doesn't work. I turn it off and on again, and it works. Literally, every other time it works, every other time it doesn't.Has anyone else had similar problems?

    DB:2.69:Audio Jack Works Every Other Time, Yoga 2 Pro 3f

    This seems to me the strangest thing: On my Yoga 2 Pro, ever since I got it, the audio mini jack output (well, and input, there's only one jack for both mic-in and audio-out) only works every other time I turn on my computer.It's like this: I'm listening to music or watching a movie with sound coming from the built-in speakers. Then I plug in earphones so as not to disturb others, except there's no audio output to the earphones. The computer says "You just pluggd a device in the audio jack" but there's no audio coming from the headphones. I unplug them and audio is once again playing out loud from the built-in speakers.Ok, so I restart the computer, and the audio jack works fine, I get audio in my headphones. Then when I turn off my computer and turn it on again, the audio jack doesn't work. I turn it off and on again, and it works. Literally, every other time it works, every other time it doesn't.Has anyone else had similar problems?

  • RELEVANCY SCORE 2.69

    DB:2.69:Audio Still Doesn't Work... 3z



    Skype Audio still doesn't work on my wife's HP Laptop (Windows 7) even after following all of the suggested troubleshooting (adjusting computer sound settings - speaker microphone; downloading running fix-it). Other sound works, but when selecting test call, cannot hear any audio. Any suggestions greatly appreciated.

    DB:2.69:Audio Still Doesn't Work... 3z


    What devices do you see selected for Speakers and Microphone in Tools - Options - Audio settings? Are there more than one options available in the sellection boxes?

  • RELEVANCY SCORE 2.68

    DB:2.68:Trying To Work Remotely On Another Computer Via Ichat sd


    Greetings,

    A collaborator of mine just got Logic express and we're trying to work on some projects together.

    Using iChat can share his screen and control his computer but I can't hear any thing from Logic's output. I've tried setting his audio output to "built in" (as opposed to his soundcard but it still doesn't work.

    Is it at all possible? Is there some other way to do this?

    Thanks

    DB:2.68:Trying To Work Remotely On Another Computer Via Ichat sd

    Thanks for the suggestions. We're going to give it a whirl.

  • RELEVANCY SCORE 2.68

    DB:2.68:Nb205 N325bn Built-In Webcam Doesn't Work 33



    Please advise how to resolve this.

    DB:2.68:Nb205 N325bn Built-In Webcam Doesn't Work 33

    mini notebook NB205-N325BN

    Try reinstalling this.

    Toshiba Web Camera Application for Windows XP/7 (32/64)




    -Jerry

  • RELEVANCY SCORE 2.68

    DB:2.68:Audio Output Device a9



    how do I get it to work again

    DB:2.68:Audio Output Device a9


    Hi,

    Try using Recovery Manager to reinstall your original Audio Driver ( IDT, Realtek, Connexant etc ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.

    Recovery Manager - Windows 7

    Recovery Manager - Windows Vista

    After the reinstallation has completed, restart the notebook.

    Regards,

    DP-K

  • RELEVANCY SCORE 2.68

    DB:2.68:Digital Audio Output On W500 ds


    I have been searching and reading for the answer on how to get digital audio out of my Thinkpad W500, but could not find anything rather than complaints that DisplayPort does not carry out audion signal. Is there any proven option to get W500 output HD video along with digital audio? I understand that Display port is not an option. How about ExpressCard slots, FireWire, USB?Or can I buy HDMI compatible graphic cars to replace built-in FireGL? If so, then what card will work with W500?Any help is much appreciated...

    DB:2.68:Digital Audio Output On W500 ds

    would love to hear how you go with the vidock.



    Regards,Jin LiMay this year, be the year of 'DO'!I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • RELEVANCY SCORE 2.68

    DB:2.68:Multichannel Optical Output Unavailable (Gray) xk


    Multichannel optical output unavailable (gray)
    HelloI can not have an output multichannel audio in 5.1 (or 7.1) for the parameter digital output built-in "configure speakers" I stay in stereo.Multichannel is grayI am using the Apple DVD player DTS and DD 5.1 butWhy with the numrique optical output is not able to access the settings multichannel sound 2.0 digital audio output domme the parmetres Apple's program "audio midi"
    xavier

    DB:2.68:Multichannel Optical Output Unavailable (Gray) xk

    Multichannel optical output unavailable (gray)
    HelloI can not have an output multichannel audio in 5.1 (or 7.1) for the parameter digital output built-in "configure speakers" I stay in stereo.Multichannel is grayI am using the Apple DVD player DTS and DD 5.1 butWhy with the numrique optical output is not able to access the settings multichannel sound 2.0 digital audio output domme the parmetres Apple's program "audio midi"
    xavier

  • RELEVANCY SCORE 2.68

    DB:2.68:Quits Whenever Change Audio Driver j8


    GarageBand was running perfectly until I installed another Mp3-editor/recording program that came free with a recording device I got. The software is called Audacity; it *****. Anyway, GarageBand wasn't booting up for a while and I got it to start working again. Now, whenever I try to switch the audio output from either built-in audio or the firewire audio interface to the soundsticks, it'll quit. This is a bummer because that's my keyboard setup. I need it to work. All of the sudden it's acting like a PC program.

    DB:2.68:Quits Whenever Change Audio Driver j8

    Audacity has the capability to record in 24 bit. Garageband does not. Make sure in the Audio/Midi setup utility that the 16bit sound is selected.

    You could also delete the AudioMIdi prefs to set the system back to its default values.

    I did not have good luck with Audacity either. It suddenly quit often, leaving me stranded in mid-session.

    Kurt

  • RELEVANCY SCORE 2.68

    DB:2.68:Spdif Output E-Mu 0404 3s


    Does not work SPDIF audio output on audio card E-MU 0404. Only the microphone icon. Can I do SPDIF output on this audio card?

    DB:2.68:Spdif Output E-Mu 0404 3s

    Does not work SPDIF audio output on audio card E-MU 0404. Only the microphone icon. Can I do SPDIF output on this audio card?

  • RELEVANCY SCORE 2.68

    DB:2.68:No Sound cz



    I've done a newwindows update and there is no sound coming from my laptop,

    It has deleted the speakers and AMD HDMI Output and installed Digital audio (s/pdif) instead which doesn;t work.

    under the speakers it says that it's not plugged in

    when i try and reinstall them is says there is a problem with the drivers

    could someone help

    DB:2.68:No Sound cz


    Hi @Paul_Cohead

    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.

    I will be happy to help you with your no sound issue. However, you didn't give me anything to work with. For future posts I would recommend that you check out Want Good Answers? Ask Good Questions. I will need to know what version of Windows you are using and theproduct number for your notebook. Where did you get the drivers that failed to install from AMD's website or HP's?

  • RELEVANCY SCORE 2.68

    DB:2.68:Thread: Android Remote Wipe Doesn't Seem To Work At All m1


    It looks like remote wipe still doesn\'t work for Android devices in the final release. I have tried it with the built in Exchange support on the HTC Incredible and using Road Sync, neither will wipe the device. Shame this doesn\'t work. Anyone know if there is a list of doesn\'t work features?

    DB:2.68:Thread: Android Remote Wipe Doesn't Seem To Work At All m1

    This is a direct copy/paste from the web site:

    Kill Pill is supported with Android 2.1+. In order to make this work Device Security Policy must be enabled this settings is under Mobility Connector settings. (Update3 and higher needed on Datasync server)

  • RELEVANCY SCORE 2.67

    DB:2.67:Issue With Hdmi Audio Output 3x


    I have two devices, an HDTV and a monitor w/built in speakers, connected to my computer with HDMI cables. My video card iscapableof
    HDMI audio output. I go to the playback devices manager and it says there are two HDMI audio devices. Now, one would think I could use HDMI out for sound with these facts. There is one problem: the computer thinks no HDMI device is connected. How do I get
    the stupid thing to work?

    DB:2.67:Issue With Hdmi Audio Output 3x

    Have you installed the ATI HDMI driver from Realtek? I am assuming you have Realtek sound. If so go to the link below and after entering the HD Audio codecs page, look for the ATI HDMI audio device entry. Then make sure ATI HDMI audio is enabled.
    http://www.realtek.com.tw/downloads/downloadsCheck.aspx?langid=1pnid=14pfid=24level=4conn=3downtypeid=3getdown=false

  • RELEVANCY SCORE 2.67

    DB:2.67:My Built In Monitor Speakers Dont Work When Connected Through Hdmi Cable. 8f


    Original title: My built in monitor speakers dont work

    I have a Philips 227E3LPH monitor with built in speakers. I connected and HDMIi from my computer to the monitor and picture is fine but there is no sound coming. I have tried going to sound but there is no Digital Output Device (HDMI) option. It has my monitor
    and below it, the details are 2- HD audio device.

    DB:2.67:My Built In Monitor Speakers Dont Work When Connected Through Hdmi Cable. 8f

    Hello John Rugit,
    1. Are you able to receive sound from external speakers?
    2. Was it working fine earlier?
    Perform the following troubleshooting methods:
    Method 1:
    I would suggest you to perform the troubleshooting steps from the following link to fix the sound issues in the Windows.
    No sound in Windows
    Method 2:
    I would suggest you to turn on Digital Audio (S/PDIF) out on your sound card settings and check how it works.
    a. Enable Digital Audio (SPDIF) in your volume control options.
    b. Connect your HDMI from your computer to your TV’s HDMI/DVI input port.
    c. Set your TV input to HDMI/DVI input.
    You won’t have sound yet.
    d. Turn off your TV, and turn off your computer.
    e. Turn on your computer first and your TV second. Wait for your computer to boot before turning on your TV. If you get sound out of your computer when it boots, something is still not right.
    If you got it working, your computer sound should be dead audio wise.
    Even your headphones shouldn’t be working. All audio should be going to the HDMI port.
    If it’s not working yet, try setting Digital Audio as your default, although this shouldn’t be necessary.
    Unplug headphones and all other non-HDMI output from your computer.
    Reboot your computer. If sound comes out of your computer on reboot, it’s still not working.
    Keep playing around with sound options.
    f. Boot sequence is critical. Computer first, TV second.
    g. When you get to the point where computer sound is disabled.
    Turn on your TV. It will be working.
    Refer the following link to know more about connecting a TV to your computer.
    Connect your computer to a TV

  • RELEVANCY SCORE 2.67

    DB:2.67:Headphone Jack Won't Work/Speaker Always On 8m


    I cannot get my iphone to output audio through the headphone jack, even when headphones are plugged in. It always plays through built-in speaker.

    What am I missing?!

    DB:2.67:Headphone Jack Won't Work/Speaker Always On 8m

    I just got my iphone a few days ago and i love it however the FM transmitter stoped working(which was a "works with iphone" accessory)but it still charges the phone.So the cables work. Did any of this happen with yours?

  • RELEVANCY SCORE 2.67

    DB:2.67:Sound Output Changes From Built-In To Digital az


    Every so often my sound output changes from the built-in audio to the optical digital-out port.

    DB:2.67:Sound Output Changes From Built-In To Digital az

    Polishpowerli-

    Greetings and welcome to the Apple boards.

    Apparently this is a known problem.

    This document addresses the issue.

    Luck-

    -DaddyPaycheck

  • RELEVANCY SCORE 2.67

    DB:2.67:Audio Won`T Work After Update 10.7.2 cs


    plz help!!!! I make the update and my audio doesn`t work at all!!!

    DB:2.67:Audio Won`T Work After Update 10.7.2 cs

    plz help!!!! I make the update and my audio doesn`t work at all!!!

  • RELEVANCY SCORE 2.67

    DB:2.67:Aggregate Device Won't Play: "Device Has No Output Controls" 83


    I used the Audio MIDI Setup utility.I created the Aggregate Device but the Prefs/Sound /Output tells me that the device "has no output controls" so it won't use it.The two devices are a bluetooth headset and the built-in output jack (with a plain earbud connected -- no controls on the wires).Both work individually.

    DB:2.67:Aggregate Device Won't Play: "Device Has No Output Controls" 83

    I used the Audio MIDI Setup utility.I created the Aggregate Device but the Prefs/Sound /Output tells me that the device "has no output controls" so it won't use it.The two devices are a bluetooth headset and the built-in output jack (with a plain earbud connected -- no controls on the wires).Both work individually.