• RELEVANCY SCORE 4.67

    DB:4.67:Connection To The Contentdistributor Mydomain:13390 Could Not Be Validated. Check Your Certificates And Ssa Configuration And Make Sure That Instance Of Fast Search Server Backend Is Running. m1





    When I try to run.\SecureFASTSearchConnector.ps1 -certPath FASTsearchCert.Pfx-ssaName Fast content
    SSA -username domain\username in the sharepoint 2010 management shell

    I
    have installed fast search server 2010 and created a fast search connector Fast content SSA

    I am getting Failed to connect to my.domain.co.uk:13390 Failed to initialize session with document engine: Unable to resolve Contentdistributor in my Event Log.

  • RELEVANCY SCORE 3.68

    DB:3.68:Fast For Sharepoint 2010 Contentdistributor Issue 1z





    Got the same problem as manyreported in the ULS log that the contentdistributor cannot be contacted on 13391.

    Checked the FAST installation log. And have a netsh fail.
    C:\Windows\System32\netsh.exe Output - The system cannot find the file specified.
    Did the recommended thing of changing the port on the FAST Content SSA to 13390. And indeed blew away the SSA and recreated.
    But SecureFASTSearchConnector.ps1 gives
    Connection to contentdistributor SP2010FAST.SP2010.local:13390 could not be validated. Check your certificates and ssa configuration and make sure that instanceof
    FAST Search Server backend is running.
    Used netsh to setup the FASTSearchSSL Cert on the 13390 port on the FAST Server. No joy. Used
    .\ReplaceDefaultCertificate.ps1 -generateNewCertificate $true to recreate the certificate and reinstalled and no joy.
    Telnet connects and
    SecureFASTSearchConnector.ps1 works fine for port 13391.
    netstat -to confirms if there was any doubt that the contentdistributor is running on 13390.
    Any ideas?
    Is it best to set the base port to something like 14000 when installing FAST for Sharepoint 2010 to get around this problem?

    DB:3.68:Fast For Sharepoint 2010 Contentdistributor Issue 1z

    Great :)
    I think this is soft of mentioned at:http://technet.microsoft.com/en-us/library/ff381251.aspxNot crystal clear but it hints that all web apps accounts need
    access.
    In a parent and child farm scenario, the child farm web application account must be authorized to access the FAST Search Server 2010 for SharePoint (back-end) keyword service. The account can be authorized by adding it to theFASTSearchKeywordAdministratorsgroup
    on the FAST Search Server 2010 for SharePoint administration server. TheFASTSearchKeywordAdministratorsgroup is not automatically created during installation, but can be
    created manually if you want to use this level of authorization.
    -mSearch Enthusiast - SharePoint MVP/WCF4/ASP.Net4
    http://techmikael.blogspot.com/

  • RELEVANCY SCORE 3.03

    DB:3.03:Prepareschema Error. k7





    Good day!
    Sorry for my English.
     
    My configuration:“mydomain” – dc1.mydomain and dc2.mydomain (both Windows Server 2003 R2 SP2)“sub.mydomain” – dc.sub.mydomain (Windows Server 2003)ex1.mydomain – new hardware (x64) server for Exchange 2007No Exchange organization.
     
    1. I run PrepareSchema (dc1.mydomain) from 32-bit Exchange RTM without errors.2. PrepareAD (dc1.mydomain) stop on error: No suitable domain controller was found in domain “sub.mydomain”I found two articles: http://support.microsoft.com/kb/933313 http://msexchangeteam.com/archive/2007/07/30/446579.aspx
     
    3. We downloaded the Exchange Server 2007 SP1 (64 Bits Edition).PrepareSchema (ex1.mydomain) stop on error:

    - Searching objects of type ResourceBookingConfig with filter $null, scope OneLevel under the root Global Settings.- Previous operation run on domain controller 'dc1.mydomain'.- [ERROR] Unexpected Error- [ERROR] The operation could not be performed because the object 'Microsoft.Exchange.Data.Directory.SystemConfiguration.ResourceBookingConfig' could not be found on dc1.mydomain.- Ending processing.

    DB:3.03:Prepareschema Error. k7

    Hi all,I have the same problem and I have read the article but still can't solve the problem. With the ADSIedit tool, I can't localize exactly the path described in the article.My configuration is the following:- 1 domain controler running Windows 2003 SP2 (The first domain controler and master of all operations)- 1 Exchange 2003 organisation (running on a Windows 2003 domain member computer)- 1 new domain controler running windows 2008 server- 1 new domain member computer running windows 2008 enterprise 64 bits on wich I am trying to install Exchange 2007 SP1 enterprise.When preparing the schema using the exchange 2007 sp1 setup.com /prepareAD, I am having the error describe in this post. Help please.

  • RELEVANCY SCORE 2.98

    DB:2.98:Indexing Day Cq Content In Fast With Cq Fast Agent 3f


    Mircosoft
    FAST Search Server 2010 for SharePoint is installed on Windows Server 2008 R2 (Trial version). The node controller shows indexer and indexingDispatcher process in running state. The nodeConf.xml shows that the port for indexer service is 13390. The base
    port for FAST is 13000. FAST crawler is working fine and content is indexing properly. The IP address of th box is 10.209.6.127.

    There is Day CQ instance installed on another box. We have installed CQ FAST agent on Day CQ. The CQ FAST agent is responsible to send content to FAST for indexing so that it becomes available for search. The IP address of the box is 10.208.61.97. The URL configured
    in FAST agent to hit FAST is http://10.209.6.127:13390.
    When the FAST agent sends http request (as part of connection testing) to this URL, it receives service unavailble error whereas the FAST node controller shows that indexer process is running.

    We are not able to understand why is FAST returning ' service unavailable error' when the indexer is running at port 13390.

    If anyone has worked in FAST before or experience similar problem, please let me know.

    Thanks,
    Sandeep Koul

    DB:2.98:Indexing Day Cq Content In Fast With Cq Fast Agent 3f

    Hi,
    FSIS/FSIA has the FAST Enterprise web crawler, which also can do login on pages yes. This crawler is also part of FS4SP. The difference is that FSIS/FSIA has an admin UI for the crawler, while FS4SP requires xml editing.
    Regards,
    Mikael SvensonSearch Enthusiast - MCTS SharePoint/WCF4/ASP.Net4
    http://techmikael.blogspot.com/

  • RELEVANCY SCORE 2.90

    DB:2.90:Sbs 2011 Std Remote Web Access Behind Proxy pc


    Hi guys,
    I'm learning and testing SBS 2011 STD now, and so far looks ok, but I found myself in unusual situation. Usually person could use Remote Web Access to connect to SBS 2011 when he is outside of the network, the problem is that I have a problem when the pc/notebook
    is inside another network but behind a proxy. So what happened. There is Squid proxy running on port 8080 with user and password authorization, IE is set to automatic proxy detection, so the user (in this case me) log in proxy and then access Internet. Successfully
    log in SBS remote access with my credentials but when try to use remote link to some of the workstation or main server a window pop-ups requesting my credentials for mydomain. I tried with squid username and password, also with mydomain user and password but
    still there is an error saying: Your computer can't connect to the remote computer because the web proxy server requires authentication. To allow unauthenticated traffic to an RD Gateway server through your web proxy server, contact your network administrator.
    It's strange because I already save my proxy credentials in IE and I already connect to Remote Web Access. If I'm without proxy everything is ok and as I understand with Remote Web Access the remote desktop connection is tunneled over https. So where is the
    problem? I'm sure that in a lot of cases outside networks operate behind somewhat of proxy and it will be good to know how to secure and use my connection behind such. Thanks in advance.

    DB:2.90:Sbs 2011 Std Remote Web Access Behind Proxy pc

    Hello,
    for SBS related questions please ask in
    http://social.technet.microsoft.com/Forums/en-us/home?forum=smallbusinessserverfilter=alllanguagessort=lastpostdescpage=1 SBS is always special and there are the experts.Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • RELEVANCY SCORE 2.83

    DB:2.83:External List To Sql Server Table xk


    I want to add an external list that is based on a SQL Server 2008 table. I created succesfully the connection to the SQL Server, selected the table and created two method instances. I can see my external on a SharePoint page with just one user that is shown in SharePoint Designer on the right side in the permission box. How can I change this permission settings? If I try to access my page with another user this exception is thrown:
    Error while executing web part: Microsoft.SharePoint.SPException: Der Zugriff wurde vom Geschftsdatenkatalog verweigert. --- Access Denied for User 'MYDOMAIN\Sharepoint', which may be an impersonation by 'MYDOMAIN\Sharepoint'. Securable MethodInstance with Name 'COMPANY$EmployeeListe lesen' has ACL that contains: User 'i:0#.w|mydomain\sharepointadmin' with Rights 'Execute, Edit, SetPermissions, UseInBusinessDataInLists, SelectableInClients' Stack Trace: bei Microsoft.SharePoint.BusinessData.Runtime.DataClassRuntime.ExecuteInternal(IDataClass thisDataClass, ILobSystemInstance lobSystemInstance, ILobSystem lobSystem, IMethodInstance methodInstanceToExecute, IMethod methodToExecute, IParameterCollection nonReturnParameters, Object[] overrideArgs) bei Microsoft.SharePoint.... d9bf79f8-48de-4e58-a61c-b124357263bc
    ...BusinessData.Runtime.EntityRuntime.ExecuteInternal(IDataClass thisDataClass, ILobSystemInstance lobSystemInstance, ILobSystem lobSystem, IMethodInstance methodInstanceToExecute, IMethod methodToExecute, IParameterCollection nonReturnParameters, Object[] overrideArgs, IFilterCollection filters) bei Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.ExecuteFiltered(IEntity this, IFilterCollection filterCollection, IMethodInstance methodInstanceToExecute, ILobSystemInstance lobSystemInstance) bei Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.FindFilteredb__3(IEntity e, IMethodInstance mi, IFilterCollection fc, ILobSystemInstance lsi) bei Microsoft.SharePoint.BusinessData.Runtime.EntityInstanceEnumeratorFactory.CreateEntityInstanceEnumerator(IEntity entity, IMetho... d9bf79f8-48de-4e58-a61c-b124357263bc
    ...dInstance methodInstance, IFilterCollection filters, ILobSystemInstance lobSystemInstance, ExecutionCallBack executionCallBack) bei Microsoft.SharePoint.BusinessData.MetadataModel.Static.Entity.FindFiltered(IFilterCollection filterCollection, String finderName, ILobSystemInstance lobSystemInstance) bei Microsoft.SharePoint.SPListDataSource.GetEntityInstanceEnumerator(XmlNode xnMethodAndFilters) --- Ende der internen Ausnahmestapelberwachung --- bei Microsoft.SharePoint.SPListDataSource.GetEntityInstanceEnumerator(XmlNode xnMethodAndFilters) bei Microsoft.SharePoint.SPListDataSource.GetFilteredEntityInstancesInternal(XmlDocument xdQueryView, Boolean fFormatDates, String firstRowId, Boolean fBackwardsPaging, String bdcidFirstRow, String bdcidNextPageRow, List`1 lstCo... d9bf79f8-48de-4e58-a61c-b124357263bc
    ...lumnNames, Dictionary`2 dictColumnsUsed, List`1 mapRowOrdering, List`1 lstEntityData) bei Microsoft.SharePoint.SPListDataSource.GetFilteredEntityInstances(XmlDocument xdQueryView, Boolean fFormatDates, String firstRowId, Boolean fBackwardsPaging, String bdcidFirstRow, String bdcidNextPageRow, List`1 lstColumnNames, Dictionary`2 dictColumnsUsed, List`1 mapRowOrdering, List`1 lstEntityData) bei Microsoft.SharePoint.SPListItemCollection.EnsureEntityDataViewAndOrdering(String bdcidFirstRow, String bdcidNextPageFirstRow) bei Microsoft.SharePoint.SPListItemCollection.EnsureListItemsData() bei Microsoft.SharePoint.SPListItemCollection.get_Count() bei Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteSelect(DataSourceSelectArguments selectArguments, String agg... d9bf79f8-48de-4e58-a61c-b124357263bc
    ...regateString, Boolean wantReturn, BaseXsltListWebPart webpart, SPListItemCollection listItems, String[] fieldList) bei Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigatorInternal() bei Microsoft.SharePoint.WebControls.SingleDataSource.GetXPathNavigator() bei Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) d9bf79f8-48de-4e58-a61c-b124357263bc
    InnerException 1: Access Denied for User 'MYDOMAIN\Sharepoint', which may be an impersonation by 'MYDOMAIN\Sharepoint'. Securable MethodInstance with Name 'COMPANY$EmployeeListe lesen' has ACL that contains: User 'i:0#.w|mydomain\sharepointadmin' with Rights 'Execute, Edit, SetPermissions, UseInBusinessDataInLists, SelectableInClients' Stack Trace: bei Microsoft.SharePoint.BusinessData.Runtime.DataClassRuntime.ExecuteInternal(IDataClass thisDataClass, ILobSystemInstance lobSystemInstance, ILobSystem lobSystem, IMethodInstance methodInstanceToExecute, IMethod methodToExecute, IParameterCollection nonReturnParameters, Object[] overrideArgs) bei Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.ExecuteInternal(IDataClass thisDataClass, ILobSystemInstance lobSystemInst... d9bf79f8-48de-4e58-a61c-b124357263bc
    ...ance, ILobSystem lobSystem, IMethodInstance methodInstanceToExecute, IMethod methodToExecute, IParameterCollection nonReturnParameters, Object[] overrideArgs, IFilterCollection filters) bei Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.ExecuteFiltered(IEntity this, IFilterCollection filterCollection, IMethodInstance methodInstanceToExecute, ILobSystemInstance lobSystemInstance) bei Microsoft.SharePoint.BusinessData.Runtime.EntityRuntime.FindFilteredb__3(IEntity e, IMethodInstance mi, IFilterCollection fc, ILobSystemInstance lsi) bei Microsoft.SharePoint.BusinessData.Runtime.EntityInstanceEnumeratorFactory.CreateEntityInstanceEnumerator(IEntity entity, IMethodInstance methodInstance, IFilterCollection filters, ILobSystemInstance lobSystemInstance, ExecutionCallBack ... d9bf79f8-48de-4e58-a61c-b124357263bc
    ...executionCallBack) bei Microsoft.SharePoint.BusinessData.MetadataModel.Static.Entity.FindFiltered(IFilterCollection filterCollection, String finderName, ILobSystemInstance lobSystemInstance) bei Microsoft.SharePoint.SPListDataSource.GetEntityInstanceEnumerator(XmlNode xnMethodAndFilters) d9bf79f8-48de-4e58-a61c-b124357263bc
    I tried nearly every combination of connections and credentials, I tried to implement a Secure Store Application that is responsible for the impersonation but without any success! I could imagine two different scenarios:

    all connections to the SQL Server are made by one static user, all users in SharePoint are impersonated to this user while they're viewing the external list

    or

    the SharePoint users have access to the SQL Server table.

    How can one (or even both) scenarios be implemented? I found some information that this is possible, but no step-by-step explainations/tutorials! Thanks for any help!

    DB:2.83:External List To Sql Server Table xk

    The answer for my problem was that you have to add permission in the Central Administration for the Business Data Catalog for specific SharePoint people groups!

  • RELEVANCY SCORE 2.55

    DB:2.55:Sce 2010 Agent Installation Failed On Tmg Server x9


    Hello,
    Can't install SCE 2010 agent on my TMG Server. When analyzing log, when I launch the client installation I get a denied connection on port 135 :

    Status: A non-SYN packet was dropped because it was sent by a source that does not have an established connection with the Forefront TMG computer.

    My TMG serve has 3 networks interfaces (all with many IPs) and the SCE server sends requests on the 3. All internal to internal packets are allowed.
    On the SCE side I get this message :

    The Operations Manager Server could not execute WMI Query (null) on computer xxx.xxx.xxx.

    Operation: Agent Install

    Install account: MYDOMAIN\Administrator

    Error Code: 800706BA

    Error Description: The RPC server is unavailable.
    DCOM enabled both sides, tried with antivirus on and off, tried the vbscript.dll registration, WMI service restarted.

    Really need help here.

    Thanks

    DB:2.55:Sce 2010 Agent Installation Failed On Tmg Server x9

    Hi,
    Very glad to hear the issue resolved. Also, if you have any further concerns, please do not hesitate to let us know and we are happy to be of further assistance.
    Thanks,Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.52

    DB:2.52:Clickonce Installation Error pd


    Below is the error messages many of my users are encountering when attempting to install a ClickOnce application.  This error only occurs for some users.  Some users do not experience any issues with the installation.

    LATFORM VERSION
    INFO
            Windows
           
           
            : 5.1.2600.65536 (Win32NT)
            Common Language Runtime
            : 2.0.50727.42
            System.Deployment.dll  
            : 2.0.50727.42 (RTM.050727-4200)

            mscorwks.dll   
           
            : 2.0.50727.42 (RTM.050727-4200)

            dfdll.dll      
           
            : 2.0.50727.42 (RTM.050727-4200)

            dfshim.dll     
           
            : 2.0.50727.42 (RTM.050727-4200)

    SOURCES
            Deployment url 
           
            : http://[MyDomain]/[MyVirtualDirectory]/[AssemblyName].application

    ERROR SUMMARY

            Below is a summary of the errors, details of
    these errors are listed later in the log.
            * Activation of http://[MyDomain]/[MyVirtualDirectory]/[AssemblyName].application resulted in exception.
    Following failure messages were detected:

           
            + Downloading http://[MyDomain]/[MyVirtualDirectory]/[AssemblyName].application did not succeed.
           
            + Unable to connect to the remote server
           
            + No connection could be made because the target
    machine actively refused it

    COMPONENT STORE
    TRANSACTION FAILURE SUMMARY
            No transaction error was detected.

    WARNINGS
            There were no warnings during this operation.

    OPERATION
    PROGRESS STATUS
            * [5/24/2006 2:23:03 PM] : Activation of http://[MyDomain]/[MyVirtualDirectory]/[AssemblyName].application has started.

    ERROR DETAILS

            Following errors were detected during this
    operation.
            * [5/24/2006 2:23:04 PM]
    System.Deployment.Application.DeploymentDownloadException (Unknown subtype)

           
            - Downloading http://[MyDomain]/[MyVirtualDirectory]/[AssemblyName].application did not succeed.
           
            - Source: System.Deployment
                   
    - Stack trace:

           
           
            at
    System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem
    next)
           
           
            at
    System.Deployment.Application.SystemNetDownloader.DownloadAllFiles()
           
           
            at
    System.Deployment.Application.FileDownloader.Download(SubscriptionState
    subState)
           
           
            at
    System.Deployment.Application.DownloadManager.DownloadManifestAsRawFile(Uri
    sourceUri, String targetPath, IDownloadNotification notification,
    DownloadOptions options, ServerInformation serverInformation)

           
           
            at
    System.Deployment.Application.DownloadManager.DownloadDeploymentManifestDirectBypass(SubscriptionStore
    subStore, Uri sourceUri, TempFile tempFile, SubscriptionState
    subState, IDownloadNotification notification, DownloadOptions options,
    ServerInformation serverInformation)

           
           
            at
    System.Deployment.Application.DownloadManager.DownloadDeploymentManifestBypass(SubscriptionStore
    subStore, Uri sourceUri, TempFile tempFile, SubscriptionState
    subState, IDownloadNotification notification, DownloadOptions options)

           
           
            at
    System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri
    activationUri, Boolean isShortcut)

           
           
            at
    System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object
    state)
           
            --- Inner Exception ---
           
            System.Net.WebException
           
            - Unable to connect to the remote server
           
            - Source: System
           
            - Stack trace:
           
           
            at System.Net.HttpWebRequest.GetResponse()

           
           
            at
    System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem
    next)
           
            --- Inner Exception ---
           
            System.Net.Sockets.SocketException
           
            - No connection could be made because the target
    machine actively refused it
           
            - Source: System
           
            - Stack trace:
           
           
            at System.Net.Sockets.Socket.DoConnect(EndPoint
    endPointSnapshot, SocketAddress socketAddress)
           
           
            at
    System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
           
           
            at System.Net.ServicePoint.ConnectSocketInternal(Boolean
    connectFailure, Socket s4, Socket s6, Socket socket, IPAddress
    address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout,
    Exception exception)

    COMPONENT STORE
    TRANSACTION DETAILS
            No transaction information is available.

     

    DB:2.52:Clickonce Installation Error pd

    Hi,
    I have same problem does any one have solution to resolve this issue?

  • RELEVANCY SCORE 2.45

    DB:2.45:Get String Between Two Chars 78


    Hi,
    i have a string like this:

    ..... a href=http://mydomain/sites/nextsites/..anystring/a ......

    I search for nextsites and when have found it, i want to get the part between --
    The result should be:
    http://mydomain/sites/nextsites/..
    How could i solve this?

    Best regards,
    Yavuz B.

    My Sharepoint and Enterprise 2.0 Blog http://www.bogazci.com |
    Microsoft Sharepoint Resources & Blog List

    DB:2.45:Get String Between Two Chars 78

    Hello,
    Usually when someone ask such as question they have loaded a web page into a string array or similar container and then want to parse. If this is the case consider creating a WebBrowser in a procedure, load the web page then using LINQ to get your results.
    For example, if the web page (keeping it simple) was like the one below.
    !DOCTYPE HTML PUBLIC -//W3C//DTD HTML 4.01 Transitional//EN
    html
    head
    titleUntitled/title
    /head
    body

    pDemo/p
    a href='http://mydomain/sites/balh/'First string/a
    a href='http://mydomain/sites/nextsites/'anystring/a
    /body
    /html

    We can get the a tags then filter down to one containing nextsites. In the example below I assume there is only one thus .FirstOrDefault yet that can be replaced with .ToList and allow us to iterate the results.
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
    Dim Result =
    (
    From ele In WebBrowser1.Document.GetElementsByTagName(a).Cast(Of HtmlElement)()
    Where CStr(ele.GetAttribute(href)).ToLower.Contains(nextsites)
    ).FirstOrDefault

    If Result IsNot Nothing Then
    Console.WriteLine({0} {1}, Result.GetAttribute(href).ToString, Result.InnerHtml)
    Else
    Console.WriteLine(Element not located)
    End If
    End Sub

    The results
    http://mydomain/sites/nextsites/ anystring
    I wrote the data to the IDE Output window yet could also store this data into any string variable etc to work with.

    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

  • RELEVANCY SCORE 2.39

    DB:2.39:Application Based On Bpm Deployment Problem ac


    hi,

    It seems that i must deploy my applications(JSP/EJBs) to
    %WLPI_HOME%\config\mydomain if i want to use BPM.
    May i deploy them to WL_HOME\config\mydomain ? How could i do it?

    Thanks.

    --
    /**
    * Name: Gary Wang
    * Tele: 010-65546668-8119
    * Mail: gangwang@precomtech.com
    */

    DB:2.39:Application Based On Bpm Deployment Problem ac

    Gary
    in this case you must update the config.xml appropriately

    Tony

    "Gary" gangwang@precomtech.com wrote in message
    news:3c2c043e$1@newsgroups.bea.com...
    hi,

    It seems that i must deploy my applications(JSP/EJBs) to
    %WLPI_HOME%\config\mydomain if i want to use BPM.
    May i deploy them to WL_HOME\config\mydomain ? How could i do it?

    Thanks.

    --
    /**
    * Name: Gary Wang
    * Tele: 010-65546668-8119
    * Mail: gangwang@precomtech.com
    */

  • RELEVANCY SCORE 2.36

    DB:2.36:Connection String 98


    Can someone explain this connection string. I need to no what myDomain is.

    Trusted Connection from a CE device
    Often a Windows CE device is not authenticated and logged in to a domain. To use SSPI or trusted connection / authentication from a CE device, use this connection string.
    Data Source=myServerAddress;Initial Catalog=myDataBase;Integrated Security=SSPI;User ID=myDomain\myUsername;Password=myPassword;

    DB:2.36:Connection String 98

    turns out i did not even need this for a ce device
    Integrated Security=SSPI;User ID=myDomain\myUsername.

  • RELEVANCY SCORE 2.36

    DB:2.36:Could Not Connect To Reporting Services mk


    Hi there,

    I have a problem at the SSMS to Reporting Servises connection .
    I'm using SQL Server 2008 R2 Enterprise Edition x86 and OS is Windows 7 Ultimate.
    In SQL Server Configuration Manager all servises a turned on and they are connecting

    to the LocalSystem user including to the SSRS.
    From SQL Server Management Studio i can connect to the Database Engine, Analysis Services, Integration Services,

    but I can't connect to Reporting Services.
    I tried with Windows Authentification with both the my server name, and localhost.
    It's not returning any errors, but it's connecting - the connection window stands still without any effects.
    In Report Services Configuration Manager, it's connecting to the MSSQLSERVER (mplicit instance), but I can't access the URL-s: nor
    http://MyDomain/ReportServer neither http://MyDomain/Reports, only http://localhost/ReportServer and http://localhost/Reports.
    I've repaired even the SQL instance from Add/Remove Programs, but the problem persists.
    What would be the best solution?
    Should I manually edit any configuration file?

    Thanks in advance.

    DB:2.36:Could Not Connect To Reporting Services mk

    Hi Radzyck,
    If I understand correctly, you are able to connect to the Report Server using
    http://localhost/reportserver, however, you are not about to do so using
    http://MyDomain/reportserver. Now, you are not about to connect to the Report Server from SQL Server Managerment Studio(SSMS) too.
    If so, it should be a network issue. I would suggest you trying the following steps to solve the issue:
    1. Add a A record the report server machine in the DNS.
    2. Make sure it is enabled to be connected. We can use the command to check: ping server.domain.com

    For SSMS connecting issue, please try using the following server name:
    http://localhost/reportserver
    or
    http://servername/reportserver
    If you have any more questions, please feel free to ask.
    Thanks,
    Jin ChenJin Chen - MSFT

  • RELEVANCY SCORE 2.31

    DB:2.31:May I Know Whether This Code:"/Logout?Goto=/Login/Anonymous?Domain=Mydomain" Could Really Work For Logout Redirection Back To Anonymous Desktop? 1k


  • RELEVANCY SCORE 2.31

    DB:2.31:Missing Mail - Webmail 7z





    Just upgraded to 7.1.4 from 7.02.

    When I log into webmail (squirrelmail), and compose a message and send... the message disappears.

    The message shows up in the Sent Items folder yet it has disappeared. Nothing in the queue either.

    However, horde mail works just fine.

    This is the only thing that shows up in the maillog when I click send:

    Oct 4 02:23:08 mydomain imapd: Connection, ip=[127.0.0.1]
    Oct 4 02:23:08 mydomain imapd: LOGIN, user=myusername, ip=[127.0.0.1], protocol=IMAP
    Oct 4 02:23:08 mydomain imapd: 1096870988.927883 LOGOUT, user=myusername, ip=[127.0.0.1], headers=0, body=0, rcvd=271, sent=1568, maildir=/var/qmail/mailnames/mydomain.com/myusername/Maildir

    Any ideas?

    DB:2.31:Missing Mail - Webmail 7z




    FIXED

    Figured this out... After the upgrade, Apache restarted with PHP in safe-mode. Squirrelmail apparently doesnt work when PHP runs in safe-mode. Seems odd. But oh well, that did the trick.

  • RELEVANCY SCORE 2.30

    DB:2.30:How To Access Custom Mbeanserver? jc


    I created an custom MBeanServer by using

    MBeanServerFactory.createMBeanServer("mydomain");

    How to get a connection of this MBeanServer in a stanalone java program which is running in different jvm?

    Thank
    Sree

    DB:2.30:How To Access Custom Mbeanserver? jc

    Sree,
    Hi, just as reference there is an MBean implementation for WebLogic coded up for EclipseLink - see the following implementation classes to start.

    We don't directly instantiate the server - in the case of an SE client you will need the instructions below which uses the ManagementFactory bootstrap class from example 2-8 in http://java.sun.com/javase/6/docs/technotes/guides/jmx/tutorial/essential.html#wp1054889

    Where we cache the MBeanServer and the registration/unregregistration of the MBean itself...
    http://fisheye2.atlassian.com/browse/eclipselink/trunk/foundation/org.eclipse.persistence.core/src/org/eclipse/persistence/platform/server/wls/WebLogic_10_Platform.java?r=6247
    http://fisheye2.atlassian.com/browse/eclipselink/trunk/foundation/org.eclipse.persistence.core/src/org/eclipse/persistence/services/weblogic/MBeanWebLogicRuntimeServices.java?r=6213
    http://fisheye2.atlassian.com/browse/eclipselink/trunk/foundation/org.eclipse.persistence.core/src/org/eclipse/persistence/services/weblogic/WebLogicRuntimeServices.java?r=6247

    You will need to use JNDI to get reference the the server - depending on which container you are running on EJB or Web/SE.

    /** The JMX context when running as a module */
    private static final String WLS_MODULE_ENV_CONTEXT_LOOKUP = "java:comp/env/jmx/runtime";
    /** The JMX context when running as a non-module */
    private static final String WLS_NON_MODULE_CONTEXT_LOOKUP = "java:comp/jmx/runtime";

    For your question about running a standalone SE client - I did a prototype in Feb 2009 - here is an extract of the procedure....

    I did a quick prototype by copying over the registration code from WebLogic_10_Platform to NoServerPlatform to simulate a Java_SE_Platform and mbeans register and are viewable in JConsole.
    The only change involved using the static bootstrap class instead of the WebLogic JNDI lookup.
    see: http://java.sun.com/javase/6/docs/technotes/guides/jmx/tutorial/essential.html#wp1054889

    This
    MBeanServer mBeanServerRuntime = ManagementFactory.getPlatformMBeanServer();
    Replaces
    private static final String JMX_JNDI_RUNTIME_REGISTER = "java:comp/env/jmx/runtime";
    MBeanServer mBeanServerRuntime = (MBeanServer) initialContext.lookup(JMX_JNDI_RUNTIME_REGISTER);

    thank you
    /michael
    http://www.eclipselink.org

  • RELEVANCY SCORE 2.30

    DB:2.30:Clicking Wav Loops ap



    This is strange, I've certainly had click-free loops before, for looped engine sounds, etc. And to achieve it all I did was follow the same steps that you've described (both the zero-crossing method, and the crossfade-end method).


    Definitely export as wav, to your Assets folder. Perhaps you could upload one of the problematic wav files for us to try - to see whether the problem lies in something specific to your system or in the wav file itself?

    DB:2.30:Clicking Wav Loops ap


    This is strange, I've certainly had click-free loops before, for looped engine sounds, etc. And to achieve it all I did was follow the same steps that you've described (both the zero-crossing method, and the crossfade-end method).


    Definitely export as wav, to your Assets folder. Perhaps you could upload one of the problematic wav files for us to try - to see whether the problem lies in something specific to your system or in the wav file itself?

  • RELEVANCY SCORE 2.27

    DB:2.27:Confused About Url Setting And Location Of Index.Html File 9f


    I recently posted a message asking how to use iWeb to create 2 sites on the same domain. I didn't get any help so I started to fool around on my own. I created a second site in iWeb and called it photogallery. (The first site has the same name as my domain, so let's refer to it as mydomain.)

    mydomain is published to a local folder and uploaded, via Fetch, to a folder called mydomain in the -/public_html folder. In the past, I have been able to access this site through any of the following URL's: www.mydomain.com, www.mydomain.com/home.html or www.mydomain.com/index.html. The URL always reverted to: www.mydomain.com/home.html

    However, once I had created a new site: photogallery (yet to be built) and after saving mydomain in iWeb with mydomain.com as the URL on the Settings page I could no longer do so.

    I get a 404 Not Found error message when I enter www.mydomain.com/index.html or -/home.html.

    If I entered www.mydomain.com, I got an -/index page with a link called "mydomain" which opened to mydomain at the URL: +http://www.mydomain.com/mydomain/home.html+

    SO, after looking at another similar problem in the forum, I tried also putting the index.html file located outside mydomain in the Site folder into the -/public_html folder and now I CAN access www.mydomain.com and www.domain.com/index.html - but they both revert to the URL: www.mydomain.com/mydomain/home.html.

    Is this because I have another site (photogallery) listed on iWeb or have I not entered the proper URL in the Settings panel?

    Once I get photogallery published what will happen to the index file(s)? Will there be 2? Where should they go???

    Is it even possible to have photogallery and mydomain share www.mydomain.com?

    Please advise! Thank you in advance!

    Message was edited by: Tancamb

    DB:2.27:Confused About Url Setting And Location Of Index.Html File 9f

    Thanks so much for your help and advice - I will look into the sub-domain thing - hadn't occurred to me!

  • RELEVANCY SCORE 2.27

    DB:2.27:[Svn:Fx-4.0.0] 13390: Tabbar Component Icon Updates: 7j



    Revision: 13390

    Revision: 13390

    Author: gruehle@adobe.com

    Date: 2010-01-08 14:58:36 -0800 (Fri, 08 Jan 2010)

    Log Message:

    ***********

    TabBar component icon updates:

    Added IconFile metadata to Spark TabBar

    Reverted mx TabBar icon to the previous file (it should not have been updated)

    QE notes: -

    Doc notes: -

    Bugs: SDK-24331

    Reviewer: -

    Tests run: checkintests

    Is noteworthy for integration: no

    Ticket Links:

    ***********

    http://bugs.adobe.com/jira/browse/SDK-24331

    Modified Paths:

    **************

    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/controls/TabBar.png

    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/TabBar.as

    DB:2.27:[Svn:Fx-4.0.0] 13390: Tabbar Component Icon Updates: 7j


    Revision: 13390

    Revision: 13390

    Author: gruehle@adobe.com

    Date: 2010-01-08 14:58:36 -0800 (Fri, 08 Jan 2010)

    Log Message:

    ***********

    TabBar component icon updates:

    Added IconFile metadata to Spark TabBar

    Reverted mx TabBar icon to the previous file (it should not have been updated)

    QE notes: -

    Doc notes: -

    Bugs: SDK-24331

    Reviewer: -

    Tests run: checkintests

    Is noteworthy for integration: no

    Ticket Links:

    ***********

    http://bugs.adobe.com/jira/browse/SDK-24331

    Modified Paths:

    **************

    flex/sdk/branches/4.0.0/frameworks/projects/framework/src/mx/controls/TabBar.png

    flex/sdk/branches/4.0.0/frameworks/projects/spark/src/spark/components/TabBar.as

  • RELEVANCY SCORE 2.27

    DB:2.27:Site Collection Is Missing. jx


    Greetings Techies!
    I'm fairly new to SharePoint so be gentle.
    It appears that one of my site collections has gone AWOL. In this 'missing' collection is a documentlibrary that I need to recover. I don't really care if I can get the site working, as long as I can recover the documents that were stored
    on it.
    Environment: Server 2008 R2 - hosting Hyper-V SharePoint 2010. This server connects to another (different physical box) Hyper V SQL server.
    Some of my sites are still visible, for example:
    http://mydomain:39093/SitePages/Home.aspx
    http://mydomain:39093/mydomain/sites/lostwebpages/default.aspx

    Under Central Admin I have the following Sites Listed:
    /mydomain/sites/lostwebpages( Works - just created this one to see if it was working)
    /mydomain/licensing ( doesnot work )
    /mydomain/main ( does not work )

    I have the old URL of the site that has gone AWOL (with it's documents)as:
    /mydomain:39093/sites/main/information technology/sitepages/home.aspx

    Lists and Libraries does NOT show a folder named: information technology ( not sure if that's relevant or not )
    Application logs show: EvenitID 5553 error, failure trying to synch site
    Event ID 14, SharePoint Server Search: crawler could not communicate with the server.
    Event ID 8059: SharePoint Foundation, Warning, alternate access mappings have not been configured.

    Any tips how I can get this old site back up?? There is no record of it being deleted in SHELL or in the recycle bin.

    Can I just pull those docs directly out of SQL?

    DB:2.27:Site Collection Is Missing. jx

    Sorry, I was in class all last week and wasn't able to follow up on this posting:
    In a nutshell - the ContentDB was connected to the site collection, but the web app was 'basically' broken, and not showing the missing site pageand in turn, the missing document libraries.
    What eventually worked was I used the backup utility to drill down and find the old (missing)documents library. I then exported thoseand then importedthem backinto the one'working' web app, and my missing documents appeared.
    I wasn't able to place them exactly where they were originally, but hey.. they've got them. :D
    This demo farm will be decommissioned soon and I've already started the planning phase for our 2013 deployment. At least the 'new' site will be setup correctly, documented and most importantly - backed up correctly.

    Thanks to everyone for your input.

  • RELEVANCY SCORE 2.26

    DB:2.26:Entitlement Issues With View 4 mk



    I've been tasked to create a minimalist VDI testbed and I'm currently evaluating VMWare View among other solutions. I've created a sandboxed system with a dedicated Windows 2003 Server Domain Controller, added an account named "Tester" and created a group named "VMWare Testers". To this I've added a second Windows 2003 Server joined to the domain and I installed VMWare View Connection Server with the Domain Administrator account. I've also added a Windows XP Professional box with the View Agent installed (I logged in as the domain Tester account and installed as the domain Administrator). All three machines are on a shared LAN and I don't seem to have any connectivity issues between them.

    I was able to activate the trial license without issues and I could add the XP Pro box as an individual desktop easily enough. However when I try to add Entitlements I can't seem to see any accounts on the Domain Controller. When I try to find users in the Entire Directory there is a near immediate response with nothing in the user list, when I search explicitly in mydomain.local it takes a little longer to give the same results. Using the vdmadmin command I can search for mydomain\tester and it gives a result of "Cannot find user" but searching for mydomain\Administrator says "Failed to obtain user properties".

    Hopefully I've given you enough to go on, any hints you can provide me with the missing components I've overlooked. Thanks!

    DB:2.26:Entitlement Issues With View 4 mk


    Nice that you solved it and thanks for reporting back!

    Best regards,

    Linjo

    If you find this information useful, please award points for "correct" or "helpful".

  • RELEVANCY SCORE 2.25

    DB:2.25:How To Configure The Css11506 aj



    Greeting,

    Could I get advice on how to make http://myweb.mydomain/mypath to become http://myweb/mydomain/

    Any comments will be appreciated

    Thanks in advance

    DB:2.25:How To Configure The Css11506 aj


    Hi,

    this is easiest accomplished with using a rewrite module on the webserver. There you got more flexibilty than doing this on a CSS.

    -alex

  • RELEVANCY SCORE 2.25

    DB:2.25:Buying Defy As Cheap Mini-Tablet? 88



    With the new pricing, an existing customer could get another Defy XT for $29 on the $29/mo plan (which I'm assuming means that Republic has subsidised the phone purchase). They could then cancel the service, but keep the phone. This would give them an android version of an ipod touch for only $29.

    What's to prevent people from doing this? Is Republic going to be able to afford this if many people do it?

    Bruce

    DB:2.25:Buying Defy As Cheap Mini-Tablet? 88


    if you love your 6 year old you won't buy them a Defy XT.

  • RELEVANCY SCORE 2.25

    DB:2.25:My Web Apps Could Be Run On Tomcat 4.X But Failed On Weblogic 8.1 7c



    Hi, I have a problem after deploying my web application to WebLogic 8.1. When I
    run my application, I got a runtime error as follows:

    Compilation of 'C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\beaserver_WebSpis_WebSpis\jsp_servlet\__custfind.java'
    failed:
    --------------------------------------------------------------------------------
    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\beaserver_WebSpis_WebSpis\jsp_servlet\__custfind.java:542:
    cannot resolve symbol
    probably occurred due to an error in /custFind.jsp line 116:
    input type="hidden" name="custIndex" value="%=thisCustCode%"/

    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\beaserver_WebSpis_WebSpis\jsp_servlet\__custfind.java
    uses or overrides a deprecated API.

    --------------------------------------------------------------------------------
    Full compiler error(s):
    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\beaserver_WebSpis_WebSpis\jsp_servlet\__custfind.java:542:
    cannot resolve symbol
    symbol : variable thisCustCode
    location: class jsp_servlet.__custfind
    out.print(String.valueOf(thisCustCode)); //[ /custFind.jsp;
    Line: 116]
    ^
    Note: C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\beaserver_WebSpis_WebSpis\jsp_servlet\__custfind.java
    uses or overrides a deprecated API.
    Note: Recompile with -deprecation for details.
    1 error

    --------------------------------------------------------------------------------

    And corresponding JSP coding is as follows:

    ..................
    tr
    td align="center"
    bean:write name="custList" property="custCode"/
    /td
    td
    bean:write name="custList" property="custName"/
    /td
    td align="center"
    html:form action="/goSelectCustRec.do"
    bean:define id="thisCustCode" name="custList" property="custCode"/
    input type="hidden" name="custIndex" value="%=thisCustCode%"/
    html:submit value=" Select "/
    /html:form
    /td
    /tr
    .................

    My application is run without any error on Tomcat 4.x, However, it fails under
    WebLogic 8.1. Could anyone give me some hints to shoot this problem. Thanks.

    Athens Yan.

    DB:2.25:My Web Apps Could Be Run On Tomcat 4.X But Failed On Weblogic 8.1 7c


    Hi, Craig,

    Thanks for your help. It is exactly the thing you guess, the problem is gone after
    I upgrade to SP2. However, I just sick for this nonsense bug, and it even exists
    on a release version of a most widely used application server which is holding
    many mission critical tasks worldwide!

    Athens.

    "Craig Coffin" craig+1268fbec@nfld-dot-com wrote:
    If you are using 8.1 SP1, you may want to try upgrading to SP2 and see
    if
    your problem still exists.
    There are some JSP compilation problems in SP1 that have been fixed in
    SP2.

    -- Craig

    --

    "Athens Yan" athensy@hotmail.com wrote in message
    news:3ff1a2f1$1@newsgroups.bea.com...

    Hi, I have a problem after deploying my web application to WebLogic
    8.1.
    When I
    run my application, I got a runtime error as follows:

    Compilation of
    'C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\beas
    erver_WebSpis_WebSpis\jsp_servlet\__custfind.java'
    failed:
    --------------------------------------------------------------------------
    ------

    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\bease
    rver_WebSpis_WebSpis\jsp_servlet\__custfind.java:542:
    cannot resolve symbol
    probably occurred due to an error in /custFind.jsp line 116:
    input type="hidden" name="custIndex" value="%=thisCustCode%"/

    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\bease
    rver_WebSpis_WebSpis\jsp_servlet\__custfind.java
    uses or overrides a deprecated API.

    --------------------------------------------------------------------------
    ------
    Full compiler error(s):

    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\bease
    rver_WebSpis_WebSpis\jsp_servlet\__custfind.java:542:
    cannot resolve symbol
    symbol : variable thisCustCode
    location: class jsp_servlet.__custfind
    out.print(String.valueOf(thisCustCode)); //[
    /custFind.jsp;
    Line: 116]
    ^
    Note:
    C:\bea\user_projects\domains\mydomain\.\beaserver\.wlnotdelete\extract\bease
    rver_WebSpis_WebSpis\jsp_servlet\__custfind.java
    uses or overrides a deprecated API.
    Note: Recompile with -deprecation for details.
    1 error

    --------------------------------------------------------------------------
    ------

    And corresponding JSP coding is as follows:

    ..................
    tr
    td align="center"
    bean:write name="custList" property="custCode"/
    /td
    td
    bean:write name="custList" property="custName"/
    /td
    td align="center"
    html:form action="/goSelectCustRec.do"
    bean:define id="thisCustCode" name="custList"
    property="custCode"/
    input type="hidden" name="custIndex"
    value="%=thisCustCode%"/
    html:submit value=" Select "/
    /html:form
    /td
    /tr
    .................

    My application is run without any error on Tomcat 4.x, However, it
    fails
    under
    WebLogic 8.1. Could anyone give me some hints to shoot this problem.
    Thanks.

    Athens Yan.

  • RELEVANCY SCORE 2.25

    DB:2.25:Fast - Contentdistributor Property Is Not Defined With Fast Content Service. pc



    Hello, for about a few weeks trying to configure Fast search.
    Solved many problems, there was last and most extended ones.

    13390 Failed to initialize session with document engine: Unable to resolve Contentdistributor

    Mass was read forums and articles. From a large number of open browser tabs sometimes kept. But I'm not giving up on the way to the great wisdom! ) Although a bit disappointing that it is impossible.

    Fast search is installed on one of the Front end servers.
    The current situation is that the endless attempts to connect the service. I decided to re-create the certificate:

    . \ ReplaceDefaultCertificate.ps1-generateNewCertificate $ true

    As described here:
    Encountered an error and the truth is a bit confused where to go. Not to lose hope, need support)

    Error below:
    ContentDistributor property is not defined with FAST Content Service. Please check the configuration. Aborting script.
    Exception - System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for t
    he SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote certificate is invali
    d according to the validation procedure.
    at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Ex
    ception exception)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
    at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRe
    quest)
    at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
    at System.Threading.ExecutionContext.runTryCode(Object userData)
    at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutC
    ode, Object userData)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
    at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
    at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
    at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
    at System.Net.ConnectStream.WriteHeaders(Boolean async)
    --- End of inner exception stack trace ---
    at Microsoft.Office.Server.Search.Administration.SearchApi.RunOnServer[T](CodeToRun`1 remoteCode, CodeToRun`1 localCo
    de, Boolean useCurrentSecurityContext, Int32 versionIn)
    at Microsoft.Office.Server.Search.Administration.SearchApi..ctor(SearchServiceApplication application)
    at Microsoft.Office.Server.Search.Administration.SearchServiceApplication.get_SearchApi()
    at Microsoft.Office.Server.Search.Cmdlet.ExtendedConnectorPropertyPipeBind.Read(SearchServiceApplicationPipeBind sear
    chAppPipeBind)
    at Microsoft.Office.Server.Search.Cmdlet.GetExtendedConnectorProperty.InternalValidate()
    at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord()
    PS E:\FASTSearch\installer\scripts

    DB:2.25:Fast - Contentdistributor Property Is Not Defined With Fast Content Service. pc

    Hi
    |Fast search is installed on one of the Front end servers.
    If by Front End servers you mean SP2010 Front End, I'm afraid this setup is not supported. See

    http://technet.microsoft.com/en-us/library/ff381239.aspx#BKMK_SoftwareRequirements

    Use the server for FAST Search Server 2010 for SharePoint only. Do not install FAST Search Server 2010 for SharePoint on the same server as SharePoint Server 2010.
    my 2 cts.

  • RELEVANCY SCORE 2.25

    DB:2.25:Fast Search Configuration - Cannot Successfully Run Securefastsearchconnector.Ps1 zp


    Hello,
    I am getting Failed to connect to my.domain.com:13391 Failed to initialize session with document engine: Unable to resolve Contentdistributor in my Event Log.
    When I try to run.\SecureFASTSearchConnector.ps1 -ssaName name of your content SSA -username domain\username,
    I
    get No valid certificate found to configure your SSA. Exiting.
    If I run Ping-SPEnterpriseSearchContentService my.domain.com:13391, I get a list of certificates, all of whose ConnectionSuccess is set to False.
    I've tried setting the port to 13390 based on some other posts around here, but that doesn't work. If I do that and install the No certificate certificate, I get Failed to connect to my.domain.com:13390 couldn't locate certificate: No certificate
    Please help me get to the root this problem.

    Thank you!

    DB:2.25:Fast Search Configuration - Cannot Successfully Run Securefastsearchconnector.Ps1 zp

    Ok, so it was https. You can only use https with a CA certificate, not a self signed.
    -mSearch Enthusiast - MCTS SharePoint/WCF4/ASP.Net4
    http://techmikael.blogspot.com/ - http://www.comperiosearch.com/

  • RELEVANCY SCORE 2.24

    DB:2.24:Issues Replacing Self-Signed Certificate With Certificate From My Ca 3z


    I have successfully configured the FS4SP in my farm environment with self-signed certificate provided by FAST. However when I try to replace the certificate with the certificate from my CA, I get an error. Deployment technet article

    Manage certificatessays that the following requirements should apply:

    The subject name or subject alternative name (SAN) field must contain the fully qualified domain name (FQDN) of the server that the certificate is issued to. This is required to support queries over HTTPS and administration services over HTTPS.The certificate that is issued to SharePoint Server 2010 must have the same issuer as the certificates that are issued to servers in the FAST Search Server 2010 for SharePoint farm.The FAST Search Server 2010 for SharePoint user must have access to the private key of the certificate.The certificate must support private key exchange.
    I got a general purpose certificate from my CA authority. I verified that I can install my certificate on the fast servers without issues. This implies that I have access to the private keys. The issuing authority is also the same for the certificate. However
    I could not understand the other 2 points.

    About the subject name, since its a general purpose certificate, i named it as FASTSearchCertificate and am using the same certificates across FAST and SP2010 servers. Is that correct?

    The last point defines that the certificate should support private key exchange. I did not understand this. Is there a way I can test my certificate is ok to use with FS4SP? I ran the command

    .\securefastsearchconnector.ps1 -certThumbprint xx xx xx xx xx ... -ssaName my SSA -username domain\user

    and it returned the error

    Connection to contentdistributor mydomain.com:13391 could not be validated. Check your certificates and ssa configuration and make sure that instance of FAST Search Server backend is running.

    Any help?

    DB:2.24:Issues Replacing Self-Signed Certificate With Certificate From My Ca 3z

    Your error is:
    .\SecureFASTSearchConnector.ps1 -certThumbprint xx xx xx xx xx ... -ssaName my SSA -username domain\user

    Returns: connection to contentdistributor mydomain.com:13391 could not be validated. Check your certificates and ssa configuration and make sure that instance of FAST Search Server backend is running.
    For me when using:
    .\SecureFASTSearchConnector.ps1 -ssaName name of your content SSA -username domain\username

    Returns: No valid certificate found to configure your SSA. Exiting.

    I ended up calling MS Support and they clued me in that they have had a problem before with using a
    Enhanced Key Usage of ClientAuthentication on the FAST SEARCH Server. I went back and reviewed my certs and found that since I had used a preexisting certificate on the SharePoint Server
    hosting the SSA, the certificateonly had the Enhanced Key Usage ofServerAuthentication defined. It worked once I had a certificate using both Client and Server Authentication.
    So the certificate configuration is very important in this case and should be configure as follows (to my knowlege):
    Both certificates require the ability for key exchange.

    FAST Certificate:

    Enhanced Key Usage - Server Authentication (at least, could need Client Authentication if it needs it for other functions)

    Key Usage - Digital Signature, Non-Repudiation, Key Encipherment, Data Encipherment (f0)
    SharePoint Server Certificate:

    Enhanced Key Usage - Server Authentication and Client Authentication

    Key Usage - Digital Signature, Non-Repudiation, Key Encipherment, Data Encipherment (f0)

    ApplicationPolicies: Server Authentication and Client Authentication (not sure if this is a requirement, just what I used to get it going, I will test without this on the next stage, but don't have time just now.)

  • RELEVANCY SCORE 2.24

    DB:2.24:Emails To/From Server Always Bounce To Some Domains aa


    Sorry if I'm posting this in the wrong place. I've wasted 2 full days and sporadic time throughout the last 3 weeks on this.

    I recently migrated a site from Server 2003 to a new Windows Server 2008 server. Ever since the move, my emails to and from my email address bounce from the server. I've spent 3 weeks with tech support on both ends getting nowhere.

    Here's a rundown of the problem and what I've done about it:

    Problem 1: Email from my domain (call it mydomain .tld) sent to the new server (call it serverdomain .tld) always bounces
    Emails sent from mydomain .tld to serverdomain .tld get bounced back INSTANTLY with the error 550-The mail server could not deliver mail to user@ serverdomain .tld. The account or domain may not exist, they may be blacklisted, or missing the proper
    dns entries.

    Problem 2: Email from serverdomain .tld sent to mydomain .tld always bounces
    Emails sent from serverdomain .tld directly to mydomain .tld always bounce back after a 5-10 second delay with the error 550 Sender verify failed.

    All emails were sent directly from server to server using webmail interfaces.

    Possible problems/solutions I've explored:

    Spam Filtering:
    The new server's mail server (SmarterMail 2010) has spam filter bouncing disabled. No blacklists or greylists are defined.
    The server hosting my email account is a shared hosted server, so I don't have access to its spam settings, but I have been assured by their technical support that the server's IP address is not blacklisted or blocked in any way.
    Blacklist tests at MXToolBox.org all come up clean.

    SPF Records:
    I have defined an SPF (TXT) record for the domain v=spf1 ip4:xxx.xxx.xxx.xxx -all, which points to the IP address of the mail server / web server. I do not have a type (SPF) record as Windows Server doesn't have an option for this type of record.
    SPF test passes without errors at www . kitterman.com/spf/validate.html. Test email through spf-test@ openspf.net returns no errors.

    Reverse Lookup:
    I have a working reverse IP set up and is confirmed by checking it at ipadmin.junkemailfilter.com/rdns.php that points back to serverdomain .tld.

    Testing through Telnet actually works:
    I followed the steps at technet.microsoft.com/en-us/library/bb123686.aspx to log into the SMTP server on the new server's end and was able to successfully send an email manually to the new server, even using the same email address that keeps failing to send
    directly to the server.

    Some observations from the logs:
    When sending email from mydomain .tld to serverdomain .tld, NO LOG ENTRIES are created at serverdomain .tld. This leads me to believe something is blocking it before it ever connects to the server.

    When sending email from serverdomain .tld to mydomain .tld, the following log entries are created:

    13:02:50 [60055] Delivery started for user@ serverdomain .tld at 1:02:50 PM
    13:02:53 [60055] Skipping spam checks: No local recipients
    13:02:56 [60055] Sending remote mail for user@ serverdomain .tld
    13:02:56 [60055] Initiating connection to xxx.xxx.xxx.xxx
    13:02:56 [60055] Connecting to xxx.xxx.xxx.xxx:25 (Id: 1)
    13:02:56 [60055] Connection to xxx.xxx.xxx.xxx:25 from xxx.xxx.xxx.xxx:65260 succeeded (Id: 1)
    13:02:56 [60055] RSP: 220-mydomain-host.tld ESMTP Exim 4.77 #2 Wed, 24 Oct 2012 13:02:58 -0700

    13:02:56 [60055] RSP: 220-We do not authorize the use of this system to transport unsolicited,

    13:02:56 [60055] RSP: 220 and/or bulk e-mail.
    13:02:56 [60055] CMD: EHLO serverdomain .tld
    13:02:56 [60055] RSP: 250-mydomain-host.tld Hello serverdomain .tld [xxx.xxx.xxx.xxx]
    13:02:56 [60055] RSP: 250-SIZE 52428800
    13:02:56 [60055] RSP: 250-AUTH PLAIN LOGIN
    13:02:56 [60055] RSP: 250-STARTTLS
    13:02:56 [60055] RSP: 250 HELP
    13:02:56 [60055] CMD: MAIL FROM:user@ serverdomain .tld SIZE=951
    13:02:56 [60055] RSP: 250 OK
    13:02:56 [60055] CMD: RCPT TO:user@ mydomain .tld
    13:02:57 [60055] RSP: 550-Verification failed for user@ serverdomain .tld
    13:02:57 [60055] RSP: 550-The mail server could not deliver mail to user@ serverdomain .tld. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries.
    13:02:57 [60055] RSP: 550 Sender verify failed
    13:02:57 [60055] CMD: QUIT
    13:02:57 [60055] RSP: 221 mydomain-host.tld closing connection
    13:02:57 [60055] Bounce email written to 851023860056.eml
    13:02:57 [60055] Delivery for user@ serverdomain .tld to user@ mydomain .tld has completed (Bounced)
    13:02:59 [60056] Delivery started for at 1:02:59 PM
    13:02:59 [60055] Delivery finished for user@ serverdomain .tld at 1:02:59 PM [id:851023860055]
    13:03:02 [60056] Skipping spam checks: Internally Generated Message
    13:03:05 [60056] Starting local delivery to user@ serverdomain .tld
    13:03:05 [60056] Delivery for to user@ serverdomain .tld has completed (Delivered) Filter: None
    13:03:05 [60056] End delivery to user@ serverdomain .tld
    13:03:05 [60056] Delivery finished for at 1:03:05 PM [id:851023860056]

    Configuration:
    The new server uses Windows Server 2008 for DNS.
    The mail server is also hosted at the same IP as the DNS server.

    DNS Records for Serverdomain .tld:
    [All xxx.xxx.xxx.xxx IP addresses point to the server's IP address]
    ----------------------------------
    Forward Lookup Zone: Serverdomain .tld
    (same as parent folder) (SOA) 57, servername., hostmaster.
    (same as parent folder) (NS) servername
    (same as parent folder) (MX) [10] xxx.xxx.xxx.xxx
    (same as parent folder) (TXT) v=spf1 ip4:xxx.xxx.xxx.xxx -all
    * (A) xxx.xxx.xxx.xxx
    mail (A) xxx.xxx.xxx.xxx
    mail (MX) [10] xxx.xxx.xxx.xxx
    mail (TXT) v=spf1 ip4:xxx.xxx.xxx.xxx -all
    ns1 (A) xxx.xxx.xxx.xxx
    ns2 (A) xxx.xxx.xxx.xxx
    www (A) xxx.xxx.xxx.xxx

    Reverse Lookup Zone: xxx.xxx.xxx.in-addr.arpa (syntax of IP is backwards, does not include last 3 digits)
    (same as parent folder) (SOA) 10, servername., hostmaster.
    (same as parent folder) (NS) servername
    xxx.xxx.xxx.xxx (PTR) Serverdomain .tld

    I'm totally at a loss. This is not just blocking email to/from me, but it has blocked email to at least one other domain name as well. I can get no useful help from tech support on either end.
    (I had to put spaces in all links in this post because it wouldn't let me post links. Also, this forum crashes every single time I try to post in IE9, but works fine in FireFox. How ironic is that...)

    DB:2.24:Emails To/From Server Always Bounce To Some Domains aa

    If anyone else out there has this problem, I believe this may have been the source of the problem:
    (same as parent folder) (MX) [10] xxx.xxx.xxx.xxx
    I had used an IP address in my MX record instead of a FQDN. After using an FQDN in the MX record, it started working. I'm not 100% sure this was the only issue, but it was probably the primary one.

    None of the popular DNS checking sites out there flagged this as an issue except www.dnssy.com. IMO, DNSsy is more informative than dnsstuff.com, mxtoolbox.com, or dnscheck.com. It gave much more verbose and descriptive warnings/errors and included some links
    and suggestions.

    I hope this helps someone out there save themselves a month of frustration. :P

  • RELEVANCY SCORE 2.24

    DB:2.24:Error Deploying Application Under Sp2 p9


    Hi,

    I'm using WebLogic Server SP2 on Win2000. When I try to deploy my web Application I get following error on console
    Aug 5, 2002 9:21:38 AM EDT Error J2EE Error deploying application XXXX: Could not load XXXX
    Aug 5, 2002 9:21:38 AM EDT Error Management Error deploying application .\config\mydomain\applications\XXXX.war: java.lang.reflect.UndeclaredThrowableException

    However, on the console (Admin Page) says

    Receiving file...upload has completed, now installing... done
    ....................
    ......................
    .\config\mydomain\applications\certificate.war
    .\config\mydomain\applications\XXXX.war

    My application was working fine with SP1.

    Is this a know problem?
    Is there any solution available?

    Thanks
    Niraj

    DB:2.24:Error Deploying Application Under Sp2 p9

    Pls mention WLS version?
    Is it 6.0 or 6.1?

    Does your webapp deploys if you configure it, instead of installing it?
    Also try the same from command line and see if that helps

    --
    Kumar

    Niraj Tank wrote:

    Hi,

    I'm using WebLogic Server SP2 on Win2000. When I try to deploy my web Application I get following error on console
    Aug 5, 2002 9:21:38 AM EDT Error J2EE Error deploying application XXXX: Could not load XXXX
    Aug 5, 2002 9:21:38 AM EDT Error Management Error deploying application .\config\mydomain\applications\XXXX.war: java.lang.reflect.UndeclaredThrowableException

    However, on the console (Admin Page) says

    Receiving file...upload has completed, now installing... done
    ....................
    ......................
    .\config\mydomain\applications\certificate.war
    .\config\mydomain\applications\XXXX.war

    My application was working fine with SP1.

    Is this a know problem?
    Is there any solution available?

    Thanks
    Niraj

  • RELEVANCY SCORE 2.23

    DB:2.23:1.2 Update Kills Videos pf



    Sorry, I tried posting with IE9 and nothing would post. I reposted with Google Chrome.

    DB:2.23:1.2 Update Kills Videos pf

    It does indeed. There are many threads concerning this issue in the General Discussion forum ( why we all posted there instead of under Technical where it would be more appropriate is a mystery to me, of course I have trouble explaining most of my actions ) but it is definitely an issue.

  • RELEVANCY SCORE 2.23

    DB:2.23:Wsus Server Naming a8


     Is it permissible to have a lab WSUS server like MyDomain\WSUS1 and a production WSUS server like MyDomain\WSUS1 both talk to the Microsoft site? Is there tracking on the Micorsoft side that could cause one of the machines to fail to function correctly? The machines are on separate networks which allows the use of the same domain and machine name.

    DB:2.23:Wsus Server Naming a8

    That's absolutely WSUS related. Please use the WSUS forums: http://forums.technet.microsoft.com/en-US/winserverwsus/threads/
     

  • RELEVANCY SCORE 2.23

    DB:2.23:Mysql And Show_Process_List. Extra Info Could Be Needed... xj


    Imagine an application server (like tomcat) that has many applications that connect to the same database with the same username and password.
    Imagine that each application connects using a connection pool ...
    Could it be somehow posilble show what connections each application uses?
    If we execute show_process_list, we can see something like:

    id User Host db [...]
    --------------------------------------------------------------------------------------
    1938073 myuser mytomcat1.mydomain:57488 mydatabase1
    1938075 myuser mytomcat1.mydomain:41351 mydatabase2
    1938074 myuser mytomcat1.mydomain:41350 mydatabase2
    1938076 myuser mytomcat1.mydomain:57489 mydatabase2
    1938077 myuser localhost:52555 mydatabase2
    1938078 myuser localhost:52556 mydatabase2
    1938079 myuser localhost:52557 mydatabase2
    1938080 myuser mytomcat2.mydomain:51330 mydatabase2
    1938081 myuser mytomcat2.mydomain:51331 mydatabase2
    1938082 myuser mytomcat2.mydomain:57490 mydatabase1
    1938083 myuser mytomcat2.mydomain:57491 mydatabase1

    How do I have to start the connection pool to get to see something like that?

    id User Host db context [...]
    ------------------------------------------------------------------------------------------------------------------------------------
    1938073 myuser mytomcat1.mydomain:57488 mydatabase1 myapp1
    1938075 myuser mytomcat1.mydomain:41351 mydatabase2 myapp1
    1938074 myuser mytomcat1.mydomain:41350 mydatabase2 myapp2
    1938076 myuser mytomcat1.mydomain:57489 mydatabase2 myapp2
    1938077 myuser localhost:52555 mydatabase2
    1938078 myuser localhost:52556 mydatabase2
    1938079 myuser localhost:52557 mydatabase2
    1938080 myuser mytomcat2.mydomain:51330 mydatabase2 myapp1
    1938081 myuser mytomcat2.mydomain:51331 mydatabase2 myapp1
    1938082 myuser mytomcat2.mydomain:57490 mydatabase1 myapp2
    1938083 myuser mytomcat2.mydomain:57491 mydatabase1 myapp2

    Is it possible to add some kind of property to the connection (string) to identified the application on mysql server?

    Today we have the following connection initiation system in all applications:

    ComboPooledDataSource cpds = new ();
    cpds.setDriverClass ("com.mysql.jdbc.Driver");
    cpds.setJdbcUrl ("jdbc: mysql :/ /" + server + ":" + port + "/" + schema);
    cpds.setUser (user);
    cpds.setPassword (password);

    Would there be any possibility to connect to the database with an application context?

    ComboPooledDataSource cpds = new ();
    cpds.setDriverClass ("com.mysql.jdbc.Driver");
    cpds.setJdbcUrl ("jdbc: mysql :/ /" + server + ":" + port + "/" + schema + "/" + "myapp1");
    cpds.setUser (user);
    cpds.setPassword (password);

    I think this is not possible .. but there could be someone who had the same need ...

    DB:2.23:Mysql And Show_Process_List. Extra Info Could Be Needed... xj

    Imagine an application server (like tomcat) that has many applications that connect to the same database with the same username and password.
    Imagine that each application connects using a connection pool ...
    Could it be somehow posilble show what connections each application uses?
    If we execute show_process_list, we can see something like:

    id User Host db [...]
    --------------------------------------------------------------------------------------
    1938073 myuser mytomcat1.mydomain:57488 mydatabase1
    1938075 myuser mytomcat1.mydomain:41351 mydatabase2
    1938074 myuser mytomcat1.mydomain:41350 mydatabase2
    1938076 myuser mytomcat1.mydomain:57489 mydatabase2
    1938077 myuser localhost:52555 mydatabase2
    1938078 myuser localhost:52556 mydatabase2
    1938079 myuser localhost:52557 mydatabase2
    1938080 myuser mytomcat2.mydomain:51330 mydatabase2
    1938081 myuser mytomcat2.mydomain:51331 mydatabase2
    1938082 myuser mytomcat2.mydomain:57490 mydatabase1
    1938083 myuser mytomcat2.mydomain:57491 mydatabase1

    How do I have to start the connection pool to get to see something like that?

    id User Host db context [...]
    ------------------------------------------------------------------------------------------------------------------------------------
    1938073 myuser mytomcat1.mydomain:57488 mydatabase1 myapp1
    1938075 myuser mytomcat1.mydomain:41351 mydatabase2 myapp1
    1938074 myuser mytomcat1.mydomain:41350 mydatabase2 myapp2
    1938076 myuser mytomcat1.mydomain:57489 mydatabase2 myapp2
    1938077 myuser localhost:52555 mydatabase2
    1938078 myuser localhost:52556 mydatabase2
    1938079 myuser localhost:52557 mydatabase2
    1938080 myuser mytomcat2.mydomain:51330 mydatabase2 myapp1
    1938081 myuser mytomcat2.mydomain:51331 mydatabase2 myapp1
    1938082 myuser mytomcat2.mydomain:57490 mydatabase1 myapp2
    1938083 myuser mytomcat2.mydomain:57491 mydatabase1 myapp2

    Is it possible to add some kind of property to the connection (string) to identified the application on mysql server?

    Today we have the following connection initiation system in all applications:

    ComboPooledDataSource cpds = new ();
    cpds.setDriverClass ("com.mysql.jdbc.Driver");
    cpds.setJdbcUrl ("jdbc: mysql :/ /" + server + ":" + port + "/" + schema);
    cpds.setUser (user);
    cpds.setPassword (password);

    Would there be any possibility to connect to the database with an application context?

    ComboPooledDataSource cpds = new ();
    cpds.setDriverClass ("com.mysql.jdbc.Driver");
    cpds.setJdbcUrl ("jdbc: mysql :/ /" + server + ":" + port + "/" + schema + "/" + "myapp1");
    cpds.setUser (user);
    cpds.setPassword (password);

    I think this is not possible .. but there could be someone who had the same need ...

  • RELEVANCY SCORE 2.23

    DB:2.23:I M Unable To Log In Database Engine In Ms Sql Server 2008 Using Windows Authentication. 9c


    this is the message shows every time when ever i m trying to log in

    TITLE: Connect to Server
    ------------------------------

    Cannot connect to mydomain.

    ------------------------------
    ADDITIONAL INFORMATION:

    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)

    For help, click: http://go.microsoft.com/fwlink?ProdName=MicrosoftSQLServerEvtSrc=MSSQLServerEvtID=53LinkId=20476

    ------------------------------
    BUTTONS:

    OK
    ------------------------------

    DB:2.23:I M Unable To Log In Database Engine In Ms Sql Server 2008 Using Windows Authentication. 9c

    Simple tutorial on connecting:
    Tutorial: Getting Started with the Database Engine
    Detailed troubleshooting steps:
    How to
    Troubleshoot Connecting to the SQL Server Database EngineRick Byham, Microsoft, SQL Server Books Online, Implies no warranty

  • RELEVANCY SCORE 2.22

    DB:2.22:Connecting Mba To Domain Using Wpa Enterprise 9s


    Hi guys!I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected. So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):Username: \\MyDomain\MyUserNamePassword: MyPasswordBut not for the MBA. For the domain/username, I've tried single \s and /s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.Cheers,Kim

    DB:2.22:Connecting Mba To Domain Using Wpa Enterprise 9s

    Hi guys!I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected. So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):Username: \\MyDomain\MyUserNamePassword: MyPasswordBut not for the MBA. For the domain/username, I've tried single \s and /s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.Cheers,Kim

  • RELEVANCY SCORE 2.22

    DB:2.22:Pst Capture Tool Cant Browse To Destination Mailboxes 3s


    I tweak the HOSTs file so it would connect to the closest DC, I had this working on one server and then it started with this issue, I brought up another server and it has the same issue

    I think all the key Log info is here,

    15:01:47.126|Verbose|ExchangeHierarchy |4 |GetDatabases for Exchange: GENDAG01
    15:01:47.329|Verbose|AdoDb |3 |SELECT distinguishedName FROM 'LDAP://loumyDomainController2.myDomain.local/CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchOrganizationContainer'
    15:01:47.329|Verbose|AdoDb |3 |SELECT cn, distinguishedName FROM 'LDAP://loumyDomainController2.myDomain.local/CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchPrivateMDB' AND msExchMasterServerOrAvailabilityGroup='CN=GENDAG01,CN=Database Availability Groups,CN=Exchange Administrative Group \28FYDIBOHF23SPDLT\29,CN=Administrative
    Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local'
    15:01:47.345|Verbose|AdoDb |3 |SELECT msExchHostServerLink FROM 'LDAP://loumyDomainController2.myDomain.local/CN=OnlineArchive,CN=Databases,CN=Exchange Administrative
    Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchMDBCopy'
    15:01:47.345|Verbose|AdoDb |3 |SELECT msExchHostServerLink FROM 'LDAP://loumyDomainController2.myDomain.local/CN=High,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchMDBCopy'
    15:01:47.360|Verbose|AdoDb |3 |SELECT msExchHostServerLink FROM 'LDAP://loumyDomainController2.myDomain.local/CN=Mid,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchMDBCopy'
    15:01:47.360|Verbose|AdoDb |3 |SELECT msExchHostServerLink FROM 'LDAP://loumyDomainController2.myDomain.local/CN=STD,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchMDBCopy'
    15:01:47.360|Verbose|AdoDb |3 |SELECT msExchHostServerLink FROM 'LDAP://loumyDomainController2.myDomain.local/CN=Infra,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative
    Groups,CN=myDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myDomain,DC=local' WHERE objectClass='msExchMDBCopy'
    15:01:48.140|Trace |Listener |5 |Accepted incoming connection from 172.24.1.79:49946
    15:01:48.296|Verbose|MailboxGetter |4 |AdHarvester: Mailbox harvest success - got 280 boxes
    15:01:48.359|Trace |CentralService |7 |Received message from Agent
    15:01:48.359|Trace |Request parser |7 |Processing configuration request from Agent
    15:01:48.374|Debug |DBComputer |7 |SetStatus - Agent of LOUITTL01 sent state Completed
    15:01:48.390|Warn |BposInfo |4 |No BPOS username set
    15:02:48.404|Trace |Listener |5 |Accepted incoming connection from 172.24.1.79:49949
    15:02:48.482|Error |CentralService |3 |Error occured in get mailbox update check
    System.InvalidCastException: Specified cast is not valid.
    at System.Data.SQLite.SQLiteDataReader.VerifyType(Int32 i, DbType typ)
    at System.Data.SQLite.SQLiteDataReader.GetString(Int32 i)
    at RedGate.PSTImporterForExchange.Engine.Repository.DbMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.Engine.Repository.RepositoryMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.CentralService.PstCentralService.DoADPoll(Object state)
    15:02:48.622|Trace |CentralService |4 |Received message from Agent
    15:02:48.622|Trace |Request parser |4 |Processing configuration request from Agent
    15:02:48.622|Debug |DBComputer |4 |SetStatus - Agent of LOUITTL01 sent state Completed
    15:02:53.505|Error |CentralService |4 |Error occured in get mailbox update check
    System.InvalidCastException: Specified cast is not valid.
    at System.Data.SQLite.SQLiteDataReader.VerifyType(Int32 i, DbType typ)
    at System.Data.SQLite.SQLiteDataReader.GetString(Int32 i)
    at RedGate.PSTImporterForExchange.Engine.Repository.DbMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.Engine.Repository.RepositoryMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.CentralService.PstCentralService.DoADPoll(Object state)
    15:02:58.622|Error |CentralService |3 |Error occured in get mailbox update check
    System.InvalidCastException: Specified cast is not valid.
    at System.Data.SQLite.SQLiteDataReader.VerifyType(Int32 i, DbType typ)
    at System.Data.SQLite.SQLiteDataReader.GetString(Int32 i)
    at RedGate.PSTImporterForExchange.Engine.Repository.DbMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.Engine.Repository.RepositoryMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.CentralService.PstCentralService.DoADPoll(Object state)
    15:03:03.661|Error |CentralService |4 |Error occured in get mailbox update check
    System.InvalidCastException: Specified cast is not valid.
    at System.Data.SQLite.SQLiteDataReader.VerifyType(Int32 i, DbType typ)
    at System.Data.SQLite.SQLiteDataReader.GetString(Int32 i)
    at RedGate.PSTImporterForExchange.Engine.Repository.DbMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.Engine.Repository.RepositoryMailbox.GetMailboxes(Boolean is365)
    at RedGate.PSTImporterForExchange.CentralService.PstCentralService.DoADPoll(Object state)

    DB:2.22:Pst Capture Tool Cant Browse To Destination Mailboxes 3s

    The issue for me was when I click on set mailbox , the PST Capture tool craps out and does not allow me to select from a listing of mailboxes the way it used to. We already have a listing of users and their SMTP addresses from csvde export froma
    domain controller.
    To get around it:
    1. download SQLite Database browser
    2. stop Microsoft Exchange PST Capture service
    3.Open the database file in c:\programdata\microsoft\exchange\PST Capture\data with SQLite Database browser
    4. Add the file to the import list as you would previously.
    5. to set mailbox, use SQLite Database browser, go to Browse Data, then pst_import_list table to lookup the list ID for the import list in question.
    6. go to pst_import_files table then scroll to the import list ID (typically at bottom if a new list), then you'll see entries without target mailbox -- those would be the files you've just added to the list.
    7. Change import status to 1 , change target mailbox to the SMTP address of the mailbox. Make sure there are no spaces or returns after the SMTP address.
    8. Save database
    9. within few seconds, you'll see PST Capture update its GUI reflecting the target mailbox.
    10. Once all done and ready to import, make sure you start the PST Capture service in services applet.

    Hope this work for you.
    Will

  • RELEVANCY SCORE 2.22

    DB:2.22:[Astuce] Fast Ne Fonctionne Plus Aprs Un An sf



    Petite blague que Fast m'a fait, aprs un reset de mon index je relance le full crawl et l c'est le drame, je me retrouve avec tous les problmes m'indiquant le que le content distributor ne peut tre contact, que ce soit
    avec le port 13390 ou le 13391.
    A savoir
    Failed to connect to srvfast.xvdom.com:13390 Failed to initialize session with document engine. Unable to resolve ContentDistributor
    Failed to connect to srvfast.xvdom.com:13391 Failed to initialize session with document engine. Unable to resolve ContentDistributor

    Les recherches sur internet m'ont amen un ensemble d'articles sur le dploiement des certificats lors de l'install de Fast, or mon Fast a plus d'un an (tiens un indiceJ ) et le soucis c'est
    que si le port 13390 ne marche pas alors cela ne vient pas le la scurisation SharePoint/Fast (du moins je le pensaisJ)
    Je pense ensuite un problme de rseaux, mais comment vrifier que les ports 13390/13391 sont ouvert?
    Quand je tombe sur cette commande powershell:
    Ping-SPEnterpriseSearchContentService HostName srvfast.xvdom.com:13391
    Et la surprise

    La belle date d'expiration L mon certificat est expir car cela fait en effet plus d'un an que mon Fast est dploy
    L
    Donc la question qui se pose est comment renouveler ce P de certificat.
    dans le repertoire Fast\Installer\scripts je trouve replacedefaultcertificate.ps1

    Dans l'aide on trouve

    Sur le serveur Fast j'arrte d'abord les services:
    net stop fastsearchmonitoring
    net stop fastsearchservice
    Puis je recr un certificat:
    .\ReplaceDefaultCertificate.ps1 -generateNewCertificate $true

    Mon certificat est bien du jour

    Maintenant faut reconfigure la connexion SharePoint Fast
    On redmarre les services Fast, on reconfigure SharePoint et on teste le ping:

    On copie le certificat sur le serveur SharePoint et on lance le powershell:

    On teste le ping

    Et on lance le crawl cette fois ci a fonctionne.
    Note pour plus tard, pensais a renouveler le certificat et ne jamais utiliser de certificat Self Signed (encore aurait-il fallu savoir qu'il y avait un certificat) surtout en production.

    DB:2.22:[Astuce] Fast Ne Fonctionne Plus Aprs Un An sf

    Merci pour l'info. Ca a du tre un grand moment de solitude...Nicolas Cambot -
    Blog Nelite

  • RELEVANCY SCORE 2.21

    DB:2.21:Going Live Tomorrow...How Do I Configure Xml Registries! zz


    Hi all

    I just found out that the live server I am deploying to is behind a firewall
    and has no connection to the internet. This is causing deployment problems
    as weblogic is unable to retrieve the various DTDs (eg for application.xml,
    web.xml) from the internet. I am getting the following exception when
    deploying

    HTTP [wireless-web] Error reading Web application
    "D:\bea\wlserver6.1\.\config\mydomain\applications\.wlnotdelete\wlap38294\wi
    reless-web.war"
    java.net.UnknownHostException: www.bea.com
    at java.net.InetAddress.getAllByName0(InetAddress.java:571)
    at java.net.InetAddress.getAllByName0(InetAddress.java:540)
    at java.net.InetAddress.getAllByName(InetAddress.java:533)
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:191)

    I'm told that because of security reasons I cannot configure the live server
    to be able to connect over http (sounds fair to me I guess).

    I have attempted to setup an xml registry within the weblogic console but
    cannot seem to get weblogic to read it when it attempts to deploy my
    application. I created a xml\registries\wirelessXMLRegistry directory within
    my domain and copied all of the required DTDs into this directory.

    Below are relevent portions of my config.xml

    ?xml version="1.0" encoding="UTF-8"?
    Domain Name="mydomain"
    PasswordPolicy Name="wl_default_password_policy"/
    JDBCDataSource JNDIName="datasource-wireless"
    Name="datasource-wireless" PoolName="wireless" Targets="myserver"/
    Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/
    ApplicationManager Name="mydomain"/
    JDBCConnectionPool DriverName="weblogic.jdbc.mssqlserver4.Driver"
    Name="wireless"
    Properties="user=wireless;password=fred"
    Targets="myserver" URL="jdbc:weblogic:mssqlserver4:ukbvhsws388"/
    XMLEntityCache Name="XMLCacheMBean"/
    Security GuestDisabled="false" Name="mydomain"
    PasswordPolicy="wl_default_password_policy"
    Realm="wl_default_realm"/
    Log FileName="config/mydomain/logs/wl-domain.log" Name="mydomain"/
    Server ListenPort="80" Name="myserver" NativeIOEnabled="true"
    TransactionLogFilePrefix="config/mydomain/logs/"
    XMLEntityCache="XMLCacheMBean" XMLRegistry="wirelessXMLRegistry"
    ExecuteQueue Name="default" ThreadCount="15"/
    Log FileName="config/mydomain/logs/weblogic.log" Name="myserver"/
    ServerStart Name="myserver"/
    ServerDebug Name="myserver"/
    SSL Enabled="false" ListenPort="7002" Name="myserver"
    ServerCertificateChainFileName="config/mydomain/ca.pem"
    ServerCertificateFileName="config/mydomain/democert.pem"
    ServerKeyFileName="config/mydomain/demokey.pem"/
    KernelDebug Name="myserver"/
    WebServer LogFileName="./config/mydomain/logs/access.log"
    LoggingEnabled="true" Name="myserver"/
    /Server
    SNMPAgent Name="mydomain"/
    JTA Name="mydomain"/
    FileRealm Name="wl_default_file_realm"/
    Application Deployed="true" Name="certificate"
    Path=".\config\mydomain\applications"
    WebAppComponent Name="certificate" Targets="myserver"
    URI="certificate.war"/
    /Application
    XMLRegistry

    DocumentBuilderFactory="weblogic.apache.xerces.jaxp.DocumentBuilderFactoryIm
    pl"
    Name="wirelessXMLRegistry"
    SAXParserFactory="weblogic.apache.xerces.jaxp.SAXParserFactoryImpl"

    TransformerFactory="weblogic.apache.xalan.processor.TransformerFactoryImpl"
    WhenToCache="cache-on-reference"
    XMLEntitySpecRegistryEntry EntityURI="weblogic-ejb-jar.dtd"
    Name="weblogicejbSpec"
    SystemId="http://www.bea.com/servers/wls510/dtd/weblogic-ejb-jar.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="web-app_2_2.dtd"
    Name="webappSpec"
    SystemId="http://java.sun.com/j2ee/dtds/web-app_2_2.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="weblogic-web-jar.dtd"
    Name="weblogicwebSpec"
    SystemId="http://www.bea.com/servers/wls600/dtd/weblogic-web-jar.dtd"/
    XMLEntitySpecRegistryEntry
    EntityURI="weblogic-rdbms-persistence.dtd"
    Name="weblogicrdbmsSpec"
    SystemId="http://www.bea.com/servers/wls510/dtd/weblogic-rdbms-persistence.d
    td"/
    XMLEntitySpecRegistryEntry EntityURI="application_1_2.dtd"
    Name="applicationSpec"
    SystemId="http://java.sun.com/j2ee/dtds/application_1_2.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="ejb-jar_1_1.dtd"
    Name="ejbjarSpec"
    SystemId="http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="ejb-inprise.dtd"
    Name="ejbinpriseSpec"
    SystemId="http://www.borland.com/devsupport/appserver/dtds/ejb-inprise.dtd"/

    /XMLRegistry
    /Domain

    Any help greatly appreciated (and could save my job)

    Matt

    DB:2.21:Going Live Tomorrow...How Do I Configure Xml Registries! zz

    Hi all

    I just found out that the live server I am deploying to is behind a firewall
    and has no connection to the internet. This is causing deployment problems
    as weblogic is unable to retrieve the various DTDs (eg for application.xml,
    web.xml) from the internet. I am getting the following exception when
    deploying

    HTTP [wireless-web] Error reading Web application
    "D:\bea\wlserver6.1\.\config\mydomain\applications\.wlnotdelete\wlap38294\wi
    reless-web.war"
    java.net.UnknownHostException: www.bea.com
    at java.net.InetAddress.getAllByName0(InetAddress.java:571)
    at java.net.InetAddress.getAllByName0(InetAddress.java:540)
    at java.net.InetAddress.getAllByName(InetAddress.java:533)
    at weblogic.net.http.HttpClient.openServer(HttpClient.java:191)

    I'm told that because of security reasons I cannot configure the live server
    to be able to connect over http (sounds fair to me I guess).

    I have attempted to setup an xml registry within the weblogic console but
    cannot seem to get weblogic to read it when it attempts to deploy my
    application. I created a xml\registries\wirelessXMLRegistry directory within
    my domain and copied all of the required DTDs into this directory.

    Below are relevent portions of my config.xml

    ?xml version="1.0" encoding="UTF-8"?
    Domain Name="mydomain"
    PasswordPolicy Name="wl_default_password_policy"/
    JDBCDataSource JNDIName="datasource-wireless"
    Name="datasource-wireless" PoolName="wireless" Targets="myserver"/
    Realm FileRealm="wl_default_file_realm" Name="wl_default_realm"/
    ApplicationManager Name="mydomain"/
    JDBCConnectionPool DriverName="weblogic.jdbc.mssqlserver4.Driver"
    Name="wireless"
    Properties="user=wireless;password=fred"
    Targets="myserver" URL="jdbc:weblogic:mssqlserver4:ukbvhsws388"/
    XMLEntityCache Name="XMLCacheMBean"/
    Security GuestDisabled="false" Name="mydomain"
    PasswordPolicy="wl_default_password_policy"
    Realm="wl_default_realm"/
    Log FileName="config/mydomain/logs/wl-domain.log" Name="mydomain"/
    Server ListenPort="80" Name="myserver" NativeIOEnabled="true"
    TransactionLogFilePrefix="config/mydomain/logs/"
    XMLEntityCache="XMLCacheMBean" XMLRegistry="wirelessXMLRegistry"
    ExecuteQueue Name="default" ThreadCount="15"/
    Log FileName="config/mydomain/logs/weblogic.log" Name="myserver"/
    ServerStart Name="myserver"/
    ServerDebug Name="myserver"/
    SSL Enabled="false" ListenPort="7002" Name="myserver"
    ServerCertificateChainFileName="config/mydomain/ca.pem"
    ServerCertificateFileName="config/mydomain/democert.pem"
    ServerKeyFileName="config/mydomain/demokey.pem"/
    KernelDebug Name="myserver"/
    WebServer LogFileName="./config/mydomain/logs/access.log"
    LoggingEnabled="true" Name="myserver"/
    /Server
    SNMPAgent Name="mydomain"/
    JTA Name="mydomain"/
    FileRealm Name="wl_default_file_realm"/
    Application Deployed="true" Name="certificate"
    Path=".\config\mydomain\applications"
    WebAppComponent Name="certificate" Targets="myserver"
    URI="certificate.war"/
    /Application
    XMLRegistry

    DocumentBuilderFactory="weblogic.apache.xerces.jaxp.DocumentBuilderFactoryIm
    pl"
    Name="wirelessXMLRegistry"
    SAXParserFactory="weblogic.apache.xerces.jaxp.SAXParserFactoryImpl"

    TransformerFactory="weblogic.apache.xalan.processor.TransformerFactoryImpl"
    WhenToCache="cache-on-reference"
    XMLEntitySpecRegistryEntry EntityURI="weblogic-ejb-jar.dtd"
    Name="weblogicejbSpec"
    SystemId="http://www.bea.com/servers/wls510/dtd/weblogic-ejb-jar.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="web-app_2_2.dtd"
    Name="webappSpec"
    SystemId="http://java.sun.com/j2ee/dtds/web-app_2_2.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="weblogic-web-jar.dtd"
    Name="weblogicwebSpec"
    SystemId="http://www.bea.com/servers/wls600/dtd/weblogic-web-jar.dtd"/
    XMLEntitySpecRegistryEntry
    EntityURI="weblogic-rdbms-persistence.dtd"
    Name="weblogicrdbmsSpec"
    SystemId="http://www.bea.com/servers/wls510/dtd/weblogic-rdbms-persistence.d
    td"/
    XMLEntitySpecRegistryEntry EntityURI="application_1_2.dtd"
    Name="applicationSpec"
    SystemId="http://java.sun.com/j2ee/dtds/application_1_2.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="ejb-jar_1_1.dtd"
    Name="ejbjarSpec"
    SystemId="http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd"/
    XMLEntitySpecRegistryEntry EntityURI="ejb-inprise.dtd"
    Name="ejbinpriseSpec"
    SystemId="http://www.borland.com/devsupport/appserver/dtds/ejb-inprise.dtd"/

    /XMLRegistry
    /Domain

    Any help greatly appreciated (and could save my job)

    Matt

  • RELEVANCY SCORE 2.21

    DB:2.21:Is It A Distributed Transaction Error? 7x


    We have two WebLogic Server 6.1 in different server,A and B.
    I hava two EJB, ABean and BBean,ABean is a SessionBean,deployed in A,BBean is an EntityBean,deployed in B;

    I call BBean.create(String username) in ABean,the console of B would print Error below when ABean was rollbacked;but if ABean commit normally it would not print the error.
    Error JTA Xid=2:ac9bcf4d32281ac7(2769788),Statu
    s=Rolled back. [Reason=weblogic.transaction.internal.TimedOutException: Transact
    ion timed out after 31 seconds
    Xid=2:ac9bcf4d32281ac7(2769788),Status=Active,numRepliesOwedMe=0,numRepliesOwedO
    thers=0,seconds since begin=31,seconds left=30,ServerResourceInfo[weblogic.jdbc.
    jts.Connection]=(state=ended,assigned=none),SCInfo[mydomain+TestServer]=(state=a
    ctive),SCInfo[mydomain+myserver]=(state=active),properties=({weblogic.jdbc=t3://
    218.18.56.151:7001}),CoordinatorURL=TestServer+218.18.56.151:7001+mydomain+)],He
    uristicErrorCode=XA_HEURHAZ,numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds si
    nce begin=38,seconds left=10,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(s
    tate=rolledback,assigned=TestServer),SCInfo[mydomain+TestServer]=(state=rolledba
    ck),SCInfo[mydomain+myserver]=(state=rolledback),properties=({weblogic.jdbc=t3:/
    /218.18.56.151:7001}),CoordinatorURL=TestServer+218.18.56.151:7001+mydomain+) co
    mpleted heuristically:
    (weblogic.jdbc.jts.Connection, HeuristicHazard, (javax.transaction.xa.XAExceptio
    n: No connection associated with xid = 2:ac9bcf4d32281ac7))

    please help me!

    DB:2.21:Is It A Distributed Transaction Error? 7x

    The error says "Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 31 seconds". By default the transaction times out after 30 seconds. So change your transaction timeout to be more that 30 seconds and then try.

    If you are using using transaction to manage transaction you can use userTransaction.setTransactionTimeout(int secs).

    You can also specify the transaction timeout value in you weblogic-ejb-jar.xml file

    transaction-descriptor

    trans-timeout-seconds600/trans-timeout-seconds

    transaction-descriptor

    This sets the transaction timeout to 10 mins...

    I hope this helps...

  • RELEVANCY SCORE 2.21

    DB:2.21:How Can I Use The Connection Pool With Db2 9p


    Hi All,
    I am facing the problem with the usage for the Connection Pool.
    I want to use DB2 via JNDI lookup.
    But when starting the Weblogic server, Error occured with the following message.

    Error JDBC Cannot startup connection pool "MyJDBCPool" Cannot load driver class : com.ibm.db2.jdbc.app.DB2Driver

    DB2 and Weblogic are on the same machine.
    In case of the use of remote DB2 database, I also encountered the same error.

    Configurations are as follows.

    JDBCConnectionPool DriverName="com.ibm.db2.jdbc.app.DB2Driver"
    MaxCapacity="10" Name="MyJDBCPool"
    Password="{3DES}gCGsOfD9M6iwOtgL2v/NpA==" Targets="myserver"
    TestConnectionsOnReserve="false" TestTableName="test" URL="jdbc:db2://localhost:6789/yongjoo"/
    SNMPAgent Name="mydomain"/
    JDBCDataSource JNDIName="acsdb" Name="acsdb" PoolName="MyJDBCPool" Targets="myserver"/

    Could you please give some information about this problem? I will appreciate your kindness.

    DB:2.21:How Can I Use The Connection Pool With Db2 9p


    Hi Joe,

    Thanks your help.
    Perhaps It's my fault for Weblogic console's setting.
    After I reset the target server in console, Error message disappeared.

    But, when I call the TestCode, I encountered another error message. The error
    is NameNotFoundException.
    When lookingup the JNDI name, NameNotFoundException errer occured. I tried to
    change my setting and JNDI name, but the results are the same.

    Would you please give me some information about this one more time? I will be
    appreciated for your help.

    Follows are Config.xml
    ----------------------------------------------------------------
    JDBCConnectionPool DriverName="com.ibm.db2.jdbc.app.DB2Driver" MaxCapacity="10"

    Name="MyJDBCPool" Password="{3DES}gCGsOfD9M6iwOtgL2v/NpA==" Targets="myserver"

    TestConnectionsOnReserve="false" TestTableName="test"
    URL="jdbc:db2://localhost:6789/yongjoo"/ SNMPAgent Name="mydomain"/

    JDBCDataSource JNDIName="acsdb" Name="acsdb" PoolName="MyJDBCPool"
    Targets="myserver"/
    ----------------------------------------------------------------

    and follows are TestCode,

    ----------------------------------------------------------------
    url = "t3://localhost:7001"; //default URL
    datasource = "jdbc/acsdb";

    Context ctx = null;
    Hashtable p = new Hashtable();
    p.put(Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.jndi.WLInitialContextFactory");
    p.put(Context.PROVIDER_URL, url);

    try{
    ctx = new InitialContext(p);
    System.err.println("initialContext(p)"+ctx); -- success
    ds = (DataSource)ctx.lookup("java:comp/env/jdbc/acsdb");
    }catch(NameNotFoundException ne){
    throw new ConnectionException(); .
    }catch(NamingException ne){
    throw new ConnectionException();
    }
    ----------------------------------------------------------------

  • RELEVANCY SCORE 2.21

    DB:2.21:Fast Search For Sharepoint 2010 Connecting To Sharepoint 2010 Present On Cloud 1z


    Hi,
    I am trying to connect to Fast search for sharepoint 2010 server present in some X domain and Sharepoint 2010 present on cloud.
    When i am trying to run securesearchconnector scripti am facing the below issue. and moreover in MMC certificate is not installed.
    Connection to contentdistributor server.fqdn:13391 could not be validated. Check your certificates and ssa configuration and make sure that instance of FAST Search Server backend is running
    One thing i want to know here is ..Whether the domain of the two servers should be same?? Ifwe want to makework the above scenariothen how we can achieve.
    Can anyone provide inputs to proceed further..
    Regards,
    Altaf.

    DB:2.21:Fast Search For Sharepoint 2010 Connecting To Sharepoint 2010 Present On Cloud 1z

    Hi,
    First of all the FS4SP box has to be in the same domain as your Central Admin box, or in a domain which you have trust relationship with the SP domain. Second point is to make sure firewalls are open between the servers. The certificate is for example copied
    over using SMB.
    If you get the domain(s) setup correctly and follow the TechNet steps for installation it should in theory work. One thing to keep in mind is the latency you might get in a distributed setup like this, which may cause issues.
    Thanks,
    Mikael SvensonSearch Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
    http://techmikael.blogspot.com/
    Author of Working with FAST Search Server 2010 for SharePoint

  • RELEVANCY SCORE 2.19

    DB:2.19:To Be 13390 Or Not To Be ? 97


    Hi

    My install.txt shows 13391 below. However the C:\FASTSearch\etc\contentdistributor.cfg shows

    syd-fastsearch.ourdomain.com:13390

    == Do i have a problem and if so, how do i correct it ?
    Thanks in advance
    ==== install.txt ======
    FAST Search Content Search Service Application configuration

    ---------------------------------------------------------------

    Content Distributors (for PowerShell SSA creation): syd-fastsearch.ourdomain.com:13391

    Content Distributors (for GUI SSA creation): syd-fastsearch.ourdomain.com:13391

    Default Content Collection Name: sp

    DB:2.19:To Be 13390 Or Not To Be ? 97

    Greg,
    This should be unrelated. I wanted to stress regarding the port numbers because I know there are a lot of conflicting threads on this. FAST Content SSA should have nothing to do with contentdistributor.cfg, that file would be used by connectors such
    as JDBC Connector, FAST Web Crawler and even docpush....but the file itself has no interaction with Sharepoint side.Igor Veytskin

  • RELEVANCY SCORE 2.19

    DB:2.19:Displaying A String Array In A Jsp k9


    hi all

    I am trying to display a string array in my jsp. I have something like this as the code:

    jsp:useBean id="addRequestCommand" scope="session" class="loginproject.AddRequestCommand" /
    jsp:getProperty name = "addRequestCommand" property="portfolios"/
    /jsp:useBean

    SELECT

    %
    for(int i=0; i portfolios.length; i++) {
    %
    OPTION% = portfolios[i] %
    %
    }

    %

    I keep on getting the following error when I try to test it: could somebody help me plz, I am still new to jsp's.

    Compilation of 'D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java' failed:
    --------------------------------------------------------------------------------
    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:84: 'try' without 'catch' or 'finally'
    (No more information available, probably caused by another error)

    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:104: 'class' or 'interface' expected
    (No more information available, probably caused by another error)

    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:106: 'class' or 'interface' expected
    probably occurred due to an error in /Add.jsp line 24:
    for(int i = 0; i portfolios.length; i++) {

    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:119: 'class' or 'interface' expected
    (No more information available, probably caused by another error)

    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:130: 'class' or 'interface' expected
    (No more information available, probably caused by another error)

    --------------------------------------------------------------------------------
    Full compiler error(s):
    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:84: 'try' without 'catch' or 'finally'
    try { // error page try block
    ^
    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:104: 'class' or 'interface' expected
    out.print("\r\n\r\nbody\r\ntable border=\"0\"\r\n\t\t\t\r\n\ttr\r\n\ttdPortfolios/td\r\n\t\r\n\tSELECT\r\n\t \r\n\t ");
    ^
    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:106: 'class' or 'interface' expected
    for(int i = 0; i portfolios.length; i++) { //[ /Add.jsp; Line: 24]
    ^
    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:119: 'class' or 'interface' expected
    } catch (Exception __ee) {
    ^
    D:\bea\wlserver6.1\config\mydomain\applications\.wlnotdelete\WEB-INF\_tmp_war_myserver_myserver_ETSProject\jsp_servlet\_add.java:130: 'class' or 'interface' expected

    ^
    5 errors

    --------------------------------------------------------------------------------
    Mon Mar 18 10:01:31 CAT 2002

  • RELEVANCY SCORE 2.19

    DB:2.19:Oracle Bam Authentication Question s9


    We are facing a strange problem related to Oracle BAM authentication and I'd like to ask for opinions or suggestions.

    - We have a BAM Server called MYSERVER
    - MYSERVER is a Win2003 and BAM was installed using MYSERVER\Administrator account
    - We have a domain called MYDOMAIN
    - MYSERVER is part of domain MYDOMAIN and this domain is registered in MYSERVER as a trusted domain.

    - We have four user groups created in domain, not in bam server:

    1) MYDOMAIN\bamAdmin
    2) MYDOMAIN\bamArchitect
    3) MYDOMAIN\bamDesigner
    2) MYDOMAIN\bamUser

    - In Windows 2003 we added the following users to the groups below:

    user MYDOMAIN\adm was added to group MYDOMAIN\bamAdmin
    user MYDOMAIN\arch was added to group MYDOMAIN\bamArchitect
    user MYDOMAIN\des was added to group MYDOMAIN\bamDesigner
    user MYDOMAIN\usr was added to group MYDOMAIN\bamUser

    - In AdministratorLogin Management
    We didn't create login for users, only groups just described:

    MYDOMAIN\bamAdmin
    MYDOMAIN\bamArchitect
    MYDOMAIN\bamDesigner
    MYDOMAIN\bamUser

    - In AdministratorRoles Management
    We selected each Role and added the following groups

    Administrator MYDOMAIN\bamAdmin
    Report Architect MYDOMAIN\bamArchitect
    Report Creator MYDOMAIN\bamDesigner
    Report Viewer MYDOMAIN\bamUser

    - After that, we return to Administrator Login Management to review groups
    There is an yellow question mark indicating bam cannot validate this login in domain controller.
    This login is not currently known to be a valid login.
    We click in one of the described groups, such as

    MYDOMAIN\bamUser

    And then in "View Roles" link.
    We receive the following message

    ADC Server exception in GetUserGroups(): 3.
    Source: "ActiveDataCache" ID: "ADCServerException"
    Logon failure: unknown user name or bad password
    Source: "Oracle.BAM.Common.Core"

    Sometimes we get: "Network path not found" and finally we get this message:
    "The account used to run the Oracle BAM Active Data Cache does not have permission to retrieve the list of groups for this user. Contact your network administrator."

    - If MYDOMAIN\usr that was added to group MYDOMAIN\bamUser try to access BAM Viewer module or bam home page (http://myserver/oracleBam), he receives the same error in welcome screen.

    - User MYDOMAIN\usr can login to MYSERVER server in domain MYDOMAIN, so server recognizes the domain and user.

    - In Windows NT Alert Viewer we have several errors/warnings registered, telling that BAM could not validate user/login and also "RPC Server Unavailable" errors.

    - I tried changing ADC Service user credentials to MYDOMAIN\Administrator, but ADC Service didn't start anymore, so we have to reconfigure to MYSERVER\Administrator.

    - In ADC Log we have several messages indicating BAM could not validate user:
    2008-01-22 17:26:11,875 [User Validation Thread] WARN - ActiveDataCache Caught exception while validating user MYDOMAIN\usr: Logon failure: unknown user name or bad password

    And when we changed credentials to MYDOMAIN\Administrator we got messages indicating bam stores some type of key/encrypt information by user who installed product (MYSERVER/Administrator):
    2008-01-22 16:49:16,062 [1484] ERROR - ActiveDataCache DPAPI was unable to decrypt data. CryptUnprotectData failed. Error -2146893813: Key not valid for use in specified state.

    Somebody may point us what could be wrong, perhaps a tip or doc about WINDOWS/BAM auth integration?

    Metalink has few information about that, such as Note: 412555.1, but from network view it seems to be correct because we may log on MYDOMAIN\usr to MYSERVER successfully.

    Bam could integrate to NT user authentication seamlessly, but it seems to me that it's harder and tricky than we thought.

    Any ideas?

    Thank you in advance,
    Rogrio

    DB:2.19:Oracle Bam Authentication Question s9

    Hi,

    Windows services running as local user can not do domain user authentication (even when machine is on that domain)

    You will need to change ADC Service user credentials to MYDOMAIN\Administrator. If you just do this only in services, service wont start because the database passwords in config files are encrypted as original user and can not be decrypted by new user.

    See "Working with Post-Install Password Changes and Password Expiration Policies" in the BAM Install Guide (In chapter 3 under Additional Configuration Settings) to change the config files. And also add MYSERVER\Administrator to BAM Administrator group before change.

    The easiest may be to just reinstall as user MYDOMAIN\Administrator.

    Thanks
    Ranga

  • RELEVANCY SCORE 2.19

    DB:2.19:Connection Could Be Validated Error In Production After Renewing Fast Certificate 8k


    I have renew the FAST certificate in admin and non admin servers and copied to Sharepoint Application server and ran the

    PS C:\ .\SecureFASTSearchConnector.ps1 –certPath “C:\FASTSearchCert.pfx” –ssaName “ ” –username “DOMAIN\SP_Farm”

    It error out:Connection to contentdistributor fast.contoso.com:13391 could not be validated.
    Check your certificates and ssa configuration and make sure that instance of FAST Search Server backend is running.
    And I try to run
    Ping-SPEnterpriseSearchContentService –HostName FQDN
    The ConnectionSuccess value for FASTSearchCert should show True if the certificate is configured
    properly.
    Connection success is always false.
    I have done IISreset and tried to renew the certificates couple of times. But no user.

    Can anyone please try to point me in right direction.

    Thanks

    DB:2.19:Connection Could Be Validated Error In Production After Renewing Fast Certificate 8k


    Hello

    KPallela,

    Can you confirm the below items?
    -
    What service pack and CU do
    you have applied to your Fast Search for SharePoint 2010 environment?
    -
    Are you putting the port 13991 in your Ping-SPEnterpriseSearchContentService command?
    For example: Ping-SPEnterpriseSearchContentService domain.com:13391

    -
    Can you confirm that your %fastsearch%\etc\Contentdistributor.cfg has the correct port number 13990
    -
    Can you confirm that the Fast Content SSA content distributor section is configured with the correct port number 13991 in the UI?
    -
    Can you confirm that the certificate is found in the MMC on the SharePoint crawler node is not showing expired (since you have renewed it)
    -
    Can you confirm that the Search Service account is a member of the FastSearchAdministrators group
    -
    Can you check if the thumbprint for the contentdistributor in %fastsearch%\etc\nodeconf.xml matches what is in %fastsearch%\etc\node.xml (note: It is not recommended
    to update these files manually)
    -
    Can you confirm that the
    steps you followed to generate the new certificate match the TechNet article
    http://technet.microsoft.com/en-us/library/ff381244(v=office.14).aspx

    -
    Can you verify that when you ran
    .\SecureFASTSearchConnector.ps1 –certPath “C:\FASTSearchCert.pfx” –ssaName “ ” –username “DOMAIN\SP_Farm” that the –ssaName did not contain the “ “ as the parameter, but rather
    the actual name of your SSA (example: “Fast Content SSA”)
    -
    Can
    you confirm that there is not a special character in your search service account, such as a dollar sign?

    Let us know your findings, and if you have any questions on the above.
    Thanks!
    Rob Vazzana | Sr Support Escalation Engineer | US Customer Service Support

    Customer Service Support
    Microsoft| Services

  • RELEVANCY SCORE 2.19

    DB:2.19:Service Catalog - Application Pool Identity ja


    Hi,
    For me Service catalog application pool runs under Network Service identity and not under MyDomain\SC-Service identity. Can any one point out the reason?
     
    The moment I change identity to MyDomain\SC-Service, the Service catalog URL becomes inaccessible.
     
    Could this be the reason behind Service catalog not getting validated in IDM MMC Console?
     
    Thanks,
     
    Ashish Malhotra

    DB:2.19:Service Catalog - Application Pool Identity ja

    When Service catalogue is installed by installer, it creates 'domain\SC-Service' account and sets the SC application pool to use this identity. Did you use installer to install SC? which version of CSF3.0 are you using.
     
    Thanks,
    Natraj
     

  • RELEVANCY SCORE 2.19

    DB:2.19:Vmrun And "Connect To Server" On Linux zk



    I am trying to use vmrun on a Linux box with Workstation 8.0.2 against a vCenter installation.

    I can use vmrun against Workstation 8 and VMware Server 2.0.2.

    I can also use vmrun from a Windows machine to access vCenter.

    Trying to access vcenter from linux invariably fails:

    GUI (CTRL-L, "Connect to server"):

    Server name: myvcenterhost.mydomain.com

    User name: MYDOMAIN\myuser

    Password: ********

    Unable to retrieve any hosts on this connection. This could potentially be caused by insufficient permissions.

    Command line:

    $ vmrun -T vc -h https://myvcenterhost.mydomain.com/ -u MYDOMAIN\myuser listHost password: ********Unable to connect to host.Error: Insufficient permissions in the host operating system

    I can run the exact same vmrun line on a Windows host with the same user specified, and I get a list back.

    Are there anyone here who accesses vCenter or ESX on a windows domain remotely from a Linux host?

    If so, are there any special hoops that must be jumped through?

    DB:2.19:Vmrun And "Connect To Server" On Linux zk


    Has any resolution to this been found? I am also running into the issue with VIX 1.12. Heres the output from the vixWrapper.log:

    2013-06-14T19:54:32.857Z| vthread-3| I120: Log for VixWrapper pid=1147 version=1 build=build-1031769 option=Release

    2013-06-14T19:54:32.857Z| vthread-3| I120: The process is 64-bit.

    2013-06-14T19:54:32.857Z| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8

    2013-06-14T19:54:32.857Z| vthread-3| I120: Host is Linux 3.2.0-45-virtual Ubuntu 12.04.2 LTS

    2013-06-14T19:54:32.857Z| vthread-3| I120: Msg_Reset:

    2013-06-14T19:54:32.857Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory.

    2013-06-14T19:54:32.857Z| vthread-3| I120: ----------------------------------------

    2013-06-14T19:54:32.857Z| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.

    2013-06-14T19:54:32.857Z| vthread-3| I120: Msg_Reset:

    2013-06-14T19:54:32.857Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/config": No such file or directory.

    2013-06-14T19:54:32.857Z| vthread-3| I120: ----------------------------------------

    2013-06-14T19:54:32.857Z| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/config. Using default values.

    2013-06-14T19:54:32.857Z| vthread-3| I120: Msg_Reset:

    2013-06-14T19:54:32.857Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/share/tomcat7/.vmware/config": No such file or directory.

    2013-06-14T19:54:32.857Z| vthread-3| I120: ----------------------------------------

    2013-06-14T19:54:32.857Z| vthread-3| I120: PREF Optional preferences file not found at /usr/share/tomcat7/.vmware/config. Using default values.

    2013-06-14T19:54:32.857Z| vthread-3| I120: Msg_Reset:

    2013-06-14T19:54:32.857Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/share/tomcat7/.vmware/preferences": No such file or directory.

    2013-06-14T19:54:32.857Z| vthread-3| I120: ----------------------------------------

    2013-06-14T19:54:32.857Z| vthread-3| I120: PREF Failed to load user preferences.

    2013-06-14T19:54:32.900Z| vthread-3| I120: Error: could not open VIX wrapper config file /usr/lib/vmware/vixwrapper-product-config.txt (Could not find the file).

    2013-06-14T19:54:32.900Z| vthread-3| I120: Failed to load product wrapper configuration file '/usr/lib/vmware/vixwrapper-product-config.txt'

    2013-06-14T19:54:32.900Z| vthread-3| I120: config points to non-existent implementation library '/usr/lib/vmware-vix/server-1.0.9/64bit/libvix.so'

    2013-06-14T19:54:32.900Z| vthread-3| I120: Loading Vix implementation library /usr/lib/vmware-vix/Workstation-9.0.0-and-vSphere-5.1.0/64bit/libvix.so

    2013-06-14T19:54:32.910Z| vthread-3| I120: unable to load func Vix_PumpEvents from library /usr/lib/vmware-vix/Workstation-9.0.0-and-vSphere-5.1.0/64bit/libvix.so (/usr/lib/vmware-vix/Workstation-9.0.0-and-vSphere-5.1.0/64bit/libvix.so: undefined symbol: Vix_PumpEvents)

    2013-06-14T19:54:32.910Z| vthread-3| I120: unable to load func VixVM_OpenUrlInGuest from library /usr/lib/vmware-vix/Workstation-9.0.0-and-vSphere-5.1.0/64bit/libvix.so (/usr/lib/vmware-vix/Workstation-9.0.0-and-vSphere-5.1.0/64bit/libvix.so: undefined symbol: VixVM_OpenUrlInGuest)

    2013-06-14T19:54:34.505Z| vthread-4| W110: SSL Error: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed

    2013-06-14T19:54:34.505Z| vthread-4| I120: VThreadBase detected multiple threads.

    2013-06-14T19:54:34.505Z| vthread-4| W110: SSL: connect failed

  • RELEVANCY SCORE 2.19

    DB:2.19:Sstp Vpn Works With Local Credentials But Fails With Domain Credentials xd


    I have an Windows 2008 R2 server acting as an SSTP (RAS) VPN server. The server is a domain-member, and on my network my DCs are
    running 2003. In my test configuration using local authentication I'm able to authenticate and it appears to be functioning properly when using local credentials. However, when I switch and try authenticating using Domain credentials the connection fails at
    verifying username and password.

    error 812 the connection was prevented because of a policy configuration. Specifically, the authentication method used by the server to verify username and password may not match authentication method configuration in your
    connection profile.

    If I look in the application log on the VPN server, I see an event ID 4402 from source NPS cannot be found. Either the comonent that raises this event was not installed or the installation is corrupted... the following information
    was included with the event MYDOMIN.

    This event corresponds with two login events on my DC... Security Login/Logic Event ID 540 user MYDOMAIN\SSTPTEST1$ Logon type 3, kerberos kerberos, and Security Logon/Logoff Event ID 538 User MYDOMAIN\SSTPTEST$ Computer:
    MYDC logon type 3.

    I've veriffied that my domain user account has the ADUC user object enabled for Dial-In configuration (.e.g Remote Access Permission: Allow Access). I have tried adding and removing Network Policy settings without any change in behavior. I've tried
    permitting Domain Users unresitriced access through the NPS settings. I've also verified that the SSTPTEST1 computer object is a member of the RAS and IAS servers security group. Could it be that all of my DC's need to be 2008 DCs? I'm a bit skeptical of
    that as I haven't seen that specifically called out in any requirements. When I re-add NPS I get a message in the RAS serer's application log: There is no domain controller for domain: MYDOMAIN.
    Domain authentication for workstations and other domain-joined assets is working just fine. For
    instance, I can login via RDP to the SSTPTEST computer. I can login to my Windows7 workstation, and I have hundreds of other users logging in from their computers without issue. This issues seems to be limited to the SSTP VPN client.
    Wmi

    DB:2.19:Sstp Vpn Works With Local Credentials But Fails With Domain Credentials xd

    I know this is an old subject but! and this will seem dumb but! I have to answer this all the time.
    If you are doing group based VPN access conditionals from NPS and you are logged into your VPN server with the same creds you will use to connect to the VPN/SSTP/PPTP.
    Make sure you have not added yourself to the group AFTER you logged into the server, since a VPN connection isprocessedas a logon, the server has your session active and your memberships cached, thus you will see this issue. Logoff the server
    wait 30 seconds and try again.

  • RELEVANCY SCORE 2.19

    DB:2.19:A Different Kind Of Fast Crawl Issue s1


    I have the issue where crawls are not completing, and not reporting any successes. I know this is a common problem with expired certificates, but that is no my issue. I also know this is a common problem when TCP task offloading is enabled. I have verified
    it is disabled on all NIC's and even had a successful crawl last week. Now it is broken again, not sure what caused this. I have verified my certificates are valid, not expired, and correctly secured the content connector in my search content SSA. After running
    script I get a happy message:
    PS C:\FASTSearch\installer\scripts .\SecureFASTSearchConnector.ps1 -certPath c:\deploy\cert\FASTSearchCert.pfx -ssaName myFastContent1 -username domain\account
    Enter the certificate password: *********
    Installed certificate.
    Updated acls on certificates private keys.
    Your FAST Search Connector has been setup to use certificate, restarting osearch14.
    Connection to contentdistributor servername:13391 successfully validated.
    PS C:\FASTSearch\installer\scripts

    nctrl status on all servers show all services running and happy.
    Ping-SPEnterpriseSearchContentService -HostName servername show connectionsuccess = true for the cert I am using.
    I can browse CA Query App FAST Administration Managed Metadata here I can add new metadata fields.

    Scopes definied in Query app get pushed to FAST Search Center, no problem.
    If I runGET-FASTSearchContentCollection -Name sp, I get this error, but I think it might be because I reset the index?:
    Get-FASTSearchContentCollection : Could not retrieve 'NumDocs' from indexing engine.

    All 3 servers in my FAST farm report the following errors:
    Failed to connect to servername:13391 Failed to create session with content distributor:Failed to create session with indexingdispatcher esp/clusters/webcluster/indexing/dispatcher
    If I look atC:\FASTSearch\var\log\indexingdispatcher\indexingdispatcher.log I see this, over and over:
    [2013-02-28 09:39:23.098] VERBOSE indexingdispatcher session_factory_spy_0: Column 1 is unavailable.
    [2013-02-28 09:39:49.119] VERBOSE indexingdispatcher session_factory_spy_0: Column 1 is unavailable.
    [2013-02-28 09:40:15.156] VERBOSE indexingdispatcher session_factory_spy_0: Column 1 is unavailable.
    If I look atC:\FASTSearch\var\log\contentdistributor\contentdistributor.log I see this, over and over, what is interesting is that the port is for the non-ssl communication here, could just be a red herring, but would love for someone to verify.:
    [2013-02-28 09:41:14.732] VERBOSE contentdistributor Unable to resolve component registered as esp/clusters/webcluster/indexing/dispatcher. Will continue to try resolving...
    [2013-02-28 09:41:14.732] ERROR contentdistributor Failed to resolve esp/clusters/webcluster/indexing/dispatcher. Giving up...
    [2013-02-28 09:41:14.732] ERROR contentdistributor Failed to create session with component registered as esp/clusters/webcluster/indexing/dispatcher. Giving up after 25 seconds.WinHttpReceiveResponse failed. Url:'http://servername:13390/coreprocessing::session_factory/5.1/1362790211000000001/get_highest_session_id'
    Error:'12002'
    [2013-02-28 09:41:14.732] DEBUG contentdistributor Initializing session factory for subsystem 'esp/clusters/webcluster/indexing/dispatcher'

    I'm pretty sure that port number is OK, though from this http://support.microsoft.com/kb/2619798:
    The the install_info.txt and the contentdistributor.cfg
    list different ports by design. Port 13390 is for non-secure communications to the Content Distributors that is utilized by internal FAST communications only. However, 13391 is used for secure communications to the Content Distributors, which is required
    when connecting from SharePoint.
    Any advise from the FAST jedis out there?

    kipper stiever

    DB:2.19:A Different Kind Of Fast Crawl Issue s1

    I just resolved this. I had to completely disable ipv6 on all sharepoint and fast servers and reboot. I still have no idea why it worked last week with ipv6 enabled??
    For others that might have this issue, here's how to disable ipv6 (registry value):http://support.microsoft.com/kb/929852
    I used the Fix It at the bottom so save me some time.
    HTHkipper stiever

  • RELEVANCY SCORE 2.19

    DB:2.19:System.Directoryservices.Directorysearcher: How To Query Active Directory With Ldap Over Ssl p7


    Hello,
    I am using a code similar to this to connect to Active Directory and do some queries. It works well with plain LDAP:
    $domaininfo = new-object DirectoryServices.DirectoryEntry(LDAP://192.168.2.1/CN=Users,DC=MyDomain,DC=com,MyDomain\tu1,p@ssword)
    $searcher = New-Object System.DirectoryServices.DirectorySearcher($domaininfo)

    The question is that how can I change the connection, so I can do LDAPS (LDAP over SSL) queries?
    Thank you,

    DB:2.19:System.Directoryservices.Directorysearcher: How To Query Active Directory With Ldap Over Ssl p7

    Hi Neothwin,
    I understand that a certificate is required for ADAM or AD-LDS to be able to have SSL connectivity.
    However, I think actual Active Directory Directory Services include its own encryption mechanism, so I don't have to deal with the whole certificate business. That means it is possible to have LDAPS SSL connectivity to AD-DS without being worry about certificates.
    Is that correct?
    Thank you

  • RELEVANCY SCORE 2.19

    DB:2.19:Bind Dns With Active Directory sf


    Hello.
    I have 2 Win2008 DCs and 1 BIND DNS Server.
    On my DCS network configuration, I have DNS configuration like this:
    Preferred DNS Server: 127.0.0.1
    Alternate DNS Server: Bind_DNS_IP_address
    Users and other servers are authenticating without problems; replication and load balancing between DCs as well.
    We are just having problems with one machine, that was already on the domain but now cannot authenticate. Log error:
    ********
    The session setup from the computer pc1 failed to authenticate. The name(s) of the account(s) referenced in the security database is pc1$. The following error occurred:

    Access is denied.
    ********
    The thing is: Last month we had a power failure during the night and machines were shutdown abruptly. When I started the servers, my DC2(the 2nd machine I promoted as DC) booted before my DC1, and Active Directory was unable to start. Only after I shutdown
    DC2 and boot DC1 1st, AD was able to start.
    Question 1:
    Shouldn't the order of booting be indifferent since both DCs have the same roles and replication?
    Quention 2:
    Is this the right DNS configuration order?
    Question 3:
    I run dcdiag to check if everything is properly configured and found the following errors:
    ********* DC1 ************Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = DC1 * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: mydomain\DC1
    Starting test: Connectivity ......................... DC1 passed test Connectivity
    Testing server: mydomain\DC2
    Starting test: Connectivity ......................... DC2 passed test ConnectivityDoing primary tests
    Testing server: mydomain\DC1
    Starting test: Advertising ......................... DC1 passed test Advertising
    Starting test: FrsEvent ......................... DC1 passed test FrsEvent
    Starting test: DFSREvent ......................... DC1 passed test DFSREvent
    Starting test: SysVolCheck ......................... DC1 passed test SysVolCheck
    Starting test: KccEvent ......................... DC1 passed test KccEvent
    Starting test: KnowsOfRoleHolders ......................... DC1 passed test KnowsOfRoleHolders
    Starting test: MachineAccount ......................... DC1 passed test MachineAccount
    Starting test: NCSecDesc ......................... DC1 passed test NCSecDesc
    Starting test: NetLogons ......................... DC1 passed test NetLogons
    Starting test: ObjectsReplicated ......................... DC1 passed test ObjectsReplicated
    Starting test: Replications ......................... DC1 passed test Replications
    Starting test: RidManager ......................... DC1 passed test RidManager
    Starting test: Services ......................... DC1 passed test Services
    Starting test: SystemLog ......................... DC1 passed test SystemLog
    Starting test: VerifyReferences ......................... DC1 passed test VerifyReferences

    Testing server: mydomain\DC2

    Starting test: Advertising ......................... DC2 passed test Advertising
    Starting test: FrsEvent
    The event log File Replication Service on server DC2.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC2 failed test FrsEvent
    Starting test: DFSREvent
    The event log DFS Replication on server DC2.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC2 failed test DFSREvent
    Starting test: SysVolCheck ......................... DC2 passed test SysVolCheck
    Starting test: KccEvent
    The event log Directory Service on server DC2.mydomain could not be queried, error 0x6ba Win32 Error 1722 ........................
    DC2 failed test KccEvent
    Starting test: KnowsOfRoleHolders ......................... DC2 passed test KnowsOfRoleHolders
    Starting test: MachineAccount ......................... DC2 passed test MachineAccount
    Starting test: NCSecDesc ......................... DC2 passed test NCSecDesc
    Starting test: NetLogons ......................... DC2 passed test NetLogons
    Starting test: ObjectsReplicated ......................... DC2 passed test ObjectsReplicated
    Starting test: Replications ......................... DC2 passed test Replications
    Starting test: RidManager ......................... DC2 passed test RidManager
    Starting test: Services ......................... DC2 passed test Services
    Starting test: SystemLog
    The event log System on server DC2.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC2 failed test SystemLog
    Starting test: VerifyReferences ......................... DC2 passed test VerifyReferences


    Running partition tests on : ForestDnsZones
    Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation
    Running partition tests on : DomainDnsZones
    Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation
    Running partition tests on : Schema
    Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation
    Running partition tests on : Configuration
    Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation
    Running partition tests on : mydomain
    Starting test: CheckSDRefDom ......................... mydomain passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... mydomain passed test CrossRefValidation
    Running enterprise tests on : mydomain
    Starting test: LocatorCheck ......................... mydomain passed test LocatorCheck
    Starting test: Intersite ......................... mydomain passed test Intersite
    *********** DC2 *******************

    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    Home Server = DC2 * Identified AD Forest.
    Done gathering initial info.
    Doing initial required tests
    Testing server: mydomain\DC1
    Starting test: Connectivity ......................... DC1 passed test Connectivity
    Testing server: mydomain\DC2
    Starting test: Connectivity ......................... DC2 passed test ConnectivityDoing primary tests
    Testing server: mydomain\DC1
    Starting test: Advertising ......................... DC1 passed test Advertising
    Starting test: FrsEvent The event log File Replication Service on server DC1.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC1 failed test FrsEvent
    Starting test: DFSREvent The event log DFS Replication on server DC1.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC1 failed test DFSREvent
    Starting test: SysVolCheck ......................... DC1 passed test SysVolCheck
    Starting test: KccEvent The event log Directory Service on server DC1.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC1 failed test KccEvent
    Starting test: KnowsOfRoleHolders ......................... DC1 passed test KnowsOfRoleHolders
    Starting test: MachineAccount ......................... DC1 passed test MachineAccount
    Starting test: NCSecDesc ......................... DC1 passed test NCSecDesc
    Starting test: NetLogons ......................... DC1 passed test NetLogons
    Starting test: ObjectsReplicated ......................... DC1 passed test ObjectsReplicated
    Starting test: Replications ......................... DC1 passed test Replications
    Starting test: RidManager ......................... DC1 passed test RidManager
    Starting test: Services ......................... DC1 passed test Services
    Starting test: SystemLog The event log System on server DC1.mydomain could not be queried, error 0x6ba Win32 Error 1722 .........................
    DC1 failed test SystemLog
    Starting test: VerifyReferences ......................... DC1 passed test VerifyReferences

    Testing server: mydomain\DC2
    Starting test: Advertising ......................... DC2 passed test Advertising
    Starting test: FrsEvent ......................... DC2 passed test FrsEvent
    Starting test: DFSREvent There are warning or error events within the last 24 hours after the SYSVOL has been shared.
    Failing SYSVOL replication problems may cause Group Policy problems. ......................... DC2 passed test DFSREvent
    Starting test: SysVolCheck ......................... DC2 passed test SysVolCheck
    Starting test: KccEvent ......................... DC2 passed test KccEvent
    Starting test: KnowsOfRoleHolders ......................... DC2 passed test KnowsOfRoleHolders
    Starting test: MachineAccount ......................... DC2 passed test MachineAccount
    Starting test: NCSecDesc ......................... DC2 passed test NCSecDesc
    Starting test: NetLogons ......................... DC2 passed test NetLogons
    Starting test: ObjectsReplicated ......................... DC2 passed test ObjectsReplicated
    Starting test: Replications ......................... DC2 passed test Replications
    Starting test: RidManager ......................... DC2 passed test RidManager
    Starting test: Services ......................... DC2 passed test Services
    Starting test: SystemLog ......................... DC2 passed test SystemLog
    Starting test: VerifyReferences ......................... DC2 passed test VerifyReferences


    Running partition tests on : ForestDnsZones
    Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation
    Running partition tests on : DomainDnsZones
    Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation
    Running partition tests on : Schema
    Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation
    Running partition tests on : Configuration
    Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation
    Running partition tests on : mydomain
    Starting test: CheckSDRefDom ......................... mydomain passed test CheckSDRefDom
    Starting test: CrossRefValidation ......................... mydomain passed test CrossRefValidation
    Running enterprise tests on : mydomain
    Starting test: LocatorCheck ......................... mydomain passed test LocatorCheck
    Starting test: Intersite ......................... mydomain passed test Intersite
    Can anyone tell me what might be causing the errors?
    Regards and thank you in advance for your help!

    DB:2.19:Bind Dns With Active Directory sf

    Hello,
    for DNS please use the real ip address on the NCI and NOT the loopback ip, that can be added as 3rd DNS server. Then run ipconfig /flushdns and ipconfig /registerdns and restart the netlogon service.
    For BIND please assure to follow
    http://technet.microsoft.com/en-us/library/cc959303.aspx
    For 0x6ba please see in
    http://msmvps.com/blogs/mweber/archive/2011/02/07/possible-error-messages-on-windows-server-2008-and-windows-server-2008-r2-domain-controllers.aspxand also see for required AD ports
    http://technet.microsoft.com/en-us/library/dd772723(WS.10).aspxBest regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/

    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • RELEVANCY SCORE 2.19

    DB:2.19:Outlook Sending Behavior Resembles A Spammer And Outlook Is Also Not Compliant With Rfc 2821 7s


    I am having problems with customers whom use MS Outlook when sending outbound email thru our mail server due to Outlooks behavior and the customers are getting blocked by our server's multiple protections from spammers.

    The first issue is that Outlook is creating traffic that resembles a spammer when sending a single email message that is addressed to multiple recipients in that it is not sending a single email message to the server that is addressed to multiple recipients
    but rather sending a separate email message for each of the addressed recipients. From the mail server's logs, an email sent by Outlook that is addressed to 25 recipients is being received at the server, from the client's PC and Outlook as 25 separate email
    messages rather than a single email message.
    Why is this? Is this a bug/flaw? Can this behavior be changed via a program option or registry change?
    Here is what a mail log of other Non-MS email client programs looks like when sending a single email message that is addressed to multiple recipients: (Email and IP Addresses have been sanitized)
    Mar 27 13:48:47 mydomain postfix/smtpd[21676]: connect from host30.static.mydomain.com[10.10.10.10]
    Mar 27 13:48:47 mydomain postfix/smtpd[21676]: setting up TLS connection from host30.static.mydomain.com[10.10.10.10]
    Mar 27 13:48:47 mydomain postfix/smtpd[21676]: TLS connection established from host30.static.mydomain.com[10.10.10.10]: TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)
    Mar 27 13:48:47 mydomain postfix/smtpd[21676]: 9F5664338334: client=host30.static.mydomain.com[10.10.10.10], sasl_method=PLAIN, sasl_username=user@mail.mydomain.com
    Mar 27 13:48:49 mydomain postfix/cleanup[17644]: 9F5664338334: message-id=51533101.3010409@mydomain.com
    Mar 27 13:48:50 mydomain postfix/smtpd[21676]: disconnect from host30.static.mydomain.com[10.10.10.10]
    Mar 27 13:48:50 mydomain postfix/qmgr[18891]: 9F5664338334: from=user@mydomain.com, size=5073, nrcpt=3 (queue active)
    Mar 27 13:48:51 mydomain postfix/local[18140]: 9F5664338334: to=recipient1@mail.mydomain.com, orig_to=recipient1@mydomain.com, relay=local, delay=3.4, delays=3.4/0/0/0.06, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 27 13:48:51 mydomain postfix/local[18138]: 9F5664338334: to=recipient2@mail.mydomain.com, orig_to=recipient2@mydomain.com, relay=local, delay=3.4, delays=3.4/0/0/0.06, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 27 13:48:58 mydomain postfix/smtp[21237]: 9F5664338334: to=recipien3@mail.mydomain.com, orig_to=recipient3@mydomain.com, relay=local, delay=3.4, delays=3.4/0/0/0.06, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 27 13:48:59 mydomain postfix/qmgr[18891]: 9F5664338334: removed

    Here is what a MS Outlook's log looks like in my mail server when sending a single message to multiple recipients (7 in this example). Notice the multiple connections, multiple message-ids and multiple queue id strings:
    Mar 26 19:35:15 mydomain postfix/smtpd[8663]: connect from cpeX.otherdomain.com[10.20.20.20]
    Mar 26 19:35:15 mydomain postfix/smtpd[8663]: 7E00E43382E2: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:16 mydomain postfix/cleanup[8329]: 7E00E43382E2: message-id=086001ce2a7a$87c78660$97569320$@com
    Mar 26 19:35:16 mydomain postfix/qmgr[18891]: 7E00E43382E2: from=user@mydomain.com, size=1993, nrcpt=1 (queue active)
    Mar 26 19:35:16 mydomain postfix/local[8338]: 7E00E43382E2: to=recipient1@mail.mydomain.com, orig_to=user@mydomain.com, relay=local, delay=1.2, delays=1.1/0/0/0.04, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 26 19:35:16 mydomain postfix/qmgr[18891]: 7E00E43382E2: removed
    Mar 26 19:35:17 mydomain postfix/smtpd[8663]: AC63043382F6: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:18 mydomain postfix/cleanup[8329]: AC63043382F6: message-id=086101ce2a7a$891255e0$9b3701a0$@com
    Mar 26 19:35:18 mydomain postfix/qmgr[18891]: AC63043382F6: from=user@mydomain.com, size=1953, nrcpt=1 (queue active)
    Mar 26 19:35:19 mydomain postfix/smtp[8574]: AC63043382F6: to=recipient2@otherdomain.com, relay=mx1.otherdomain.com[192.168.1.1]:25, delay=2.8, delays=2.2/0/0.01/0.58, dsn=2.0.0, status=sent (250 ok dirdel)
    Mar 26 19:35:19 mydomain postfix/qmgr[18891]: AC63043382F6: removed
    Mar 26 19:35:19 mydomain postfix/smtpd[8663]: DC76F43382F6: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:20 mydomain postfix/cleanup[4547]: DC76F43382F6: message-id=086201ce2a7a$8a620760$9f261620$@com
    Mar 26 19:35:20 mydomain postfix/qmgr[18891]: DC76F43382F6: from=user@mydomain.com, size=2082, nrcpt=1 (queue active)
    Mar 26 19:35:21 mydomain postfix/smtp[8574]: DC76F43382F6: to=recipient3@otherdomain.com, relay=mx1.otherdomain.com[192.168.1.1]:25, delay=3, delays=2.1/0/0.15/0.75, dsn=2.0.0, status=sent (250 ok dirdel)
    Mar 26 19:35:21 mydomain postfix/qmgr[18891]: DC76F43382F6: removed
    Mar 26 19:35:22 mydomain postfix/smtpd[8663]: 13FAA43382F6: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:23 mydomain postfix/cleanup[4547]: 13FAA43382F6: message-id=086301ce2a7a$8baf47e0$a30dd7a0$@com
    Mar 26 19:35:23 mydomain postfix/qmgr[18891]: 13FAA43382F6: from=user@mydomain.com, size=1904, nrcpt=1 (queue active)
    Mar 26 19:35:23 mydomain postfix/local[8338]: 13FAA43382F6: to=recipient4@mail.mydomain.com, orig_to=recipient1@mydomain.com, relay=local, delay=2.2, delays=2.1/0/0/0.02, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 26 19:35:23 mydomain postfix/qmgr[18891]: 13FAA43382F6: removed
    Mar 26 19:35:24 mydomain postfix/smtpd[8663]: 3D23F43382F6: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:25 mydomain postfix/cleanup[4546]: 3D23F43382F6: message-id=!!AAAAAAAAAAAYAAAAAAAAAHVwZmVhym1MvyRRBpH1ZtDCgAAAEAAAAPzjByTmd8FMv3MRW0nrBDMBAAAAAA==@mydomain.com
    Mar 26 19:35:25 mydomain postfix/qmgr[18891]: 3D23F43382F6: from=user@mydomain.com, size=2179, nrcpt=1 (queue active)
    Mar 26 19:35:25 mydomain postfix/local[7325]: 3D23F43382F6: to=recipient5@mail.mydomain.com, orig_to=user@mydomain.com, relay=local, delay=2.1, delays=2.1/0/0/0.02, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 26 19:35:25 mydomain postfix/qmgr[18891]: 3D23F43382F6: removed
    Mar 26 19:35:26 mydomain postfix/smtpd[8663]: 6242543382F6: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:27 mydomain postfix/cleanup[4542]: 6242543382F6: message-id=086401ce2a7a$8e429cf0$aac7d6d0$@com
    Mar 26 19:35:27 mydomain postfix/qmgr[18891]: 6242543382F6: from=user@mydomain.com, size=2005, nrcpt=1 (queue active)
    Mar 26 19:35:27 mydomain postfix/smtp[8574]: 6242543382F6: to=recipient6@otherdomain2.com, relay=mx3.otherdomain2.com[192.168.2.1]:25, delay=2.4, delays=2.1/0/0.03/0.23, dsn=2.0.0, status=sent (250 086401ce2a7a$8e429cf0$aac7d6d0$@com Queued
    mail for delivery)
    Mar 26 19:35:27 mydomain postfix/qmgr[18891]: 6242543382F6: removed
    Mar 26 19:35:28 mydomain postfix/smtpd[8663]: 8B66143382F6: client=cpeX.otherdomain.com[10.20.20.20], sasl_method=LOGIN, sasl_username=user@mail.mydomain.com
    Mar 26 19:35:29 mydomain postfix/cleanup[8329]: 8B66143382F6: message-id=!!AAAAAAAAAAAYAAAAAAAAAHVwZmVhym1MvyRRBpH1ZtDCgAAAEAAAAJOXEZBQj7NDguvvTtOUO4QBAAAAAA==@mydomain.com
    Mar 26 19:35:29 mydomain postfix/qmgr[18891]: 8B66143382F6: from=user@mydomain.com, size=2443, nrcpt=1 (queue active)
    Mar 26 19:35:29 mydomain postfix/local[8338]: 8B66143382F6: to=recipient7@mail.mydomain.com, orig_to=user@mydomain.com, relay=local, delay=2.2, delays=2.1/0/0/0.03, dsn=2.0.0, status=sent (delivered to maildir)
    Mar 26 19:35:29 mydomain postfix/qmgr[18891]: 8B66143382F6: removed

    This abnormal behavior is getting caught by one of my Policyd filters that limits outbound message from a single user@ to 10 individual email message per minute or less, which should be a good filter considering I don't know of any person that can send a
    new email message out every 6 seconds and the only email client programs that I have found so far that are having a problem with this filter are Microsoft email clients. I believe that this is definitely a problem with both Outlook 2007 and 2010. I have
    not specifically tested Live Mail yet. I do know that THIS IS NOT AN ISSUE with Outlook 2003, it operates normally as other mail clients do.

    My second issue is that Microsoft seems to be ignoring Email RFC 2821 which clearly states that in a HELO/EHLO with a mail server that a client or other server must identify itself with a FQDN, an
    address literal (IP) is also acceptable. Microsoft Outlook 2007, 2010 and even Live Mail are all Non-Compliant with RFC 2821 and are sending the computer's NETBIOS name instead. This is an important specification that Microsoft
    should not be ignoring and needs to comply with as the HELO check is an important and proven effective Anti-Spam technique and is part of the recommended SMTP Server configuration for most mail servers including Postfix. Older MS mail clients seem to
    comply with RFC 2821 perfectly. What is going on with Microsoft's newer programs?

    Can these problems be fixed? Will Microsoft fix them? Or should I just start explaining what the technical functionality problems of MS Email Programs are to my customers, proving to them that the MS Email Programs are Junk. Convincing the world
    to stop using them and switch to other competitor's and even free email client programs that operate under properly and comply with all the email RFC's.

    DB:2.19:Outlook Sending Behavior Resembles A Spammer And Outlook Is Also Not Compliant With Rfc 2821 7s

    Hello,
    It seems that you are frustrated with Outlook. However Microsoft Outlook is tested for years before it is released to public and qualifies all RFC standards
    Further looking at your situation you are in at this point of time, i would suggest you to open phone support case with Microsoft so that a detailed troubleshooting is done and we can collect dumps and various logs to ensure that the issue has been resolved
    to your satisfaction which is not possible by Forum Posting
    You can create case by calling Microsoft Customer Central on 1-800-936-4900 or you can visit
    http://support.microsoft.com/oas
    Hope this helps

  • RELEVANCY SCORE 2.19

    DB:2.19:Lost Connection To My Search App - Errors xd


    In my dev. environment, something has happened. I returned to it from some days abscence, and discovered that it was crawling on the 380th hour! I have three contentsources which normally take about 15 minutes to crawl, and now it's crawled for hours and
    hours. The crawl log is full of different errors, but I think my real problem lies somewhere else. The Event Log on the machine is flooding with errors, about 3 or 4 different. The errors repeats themselves every 5 minutes or so.
    I restarted the machine, and this is the order the errors appear in in the event viewer after the restart:
    1. Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e20f0ba1-e70c-4ed7-904d-3d255eba813e).
    Reason: The device is not ready.
    2. An exception occurred when trying to issue security token: Could not connect to http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc/actas. TCP error code 10061: No connection could be made because the target machine
    actively refused it 127.0.0.1:32843. .
    3. Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (e20f0ba1-e70c-4ed7-904d-3d255eba813e).
    Reason: There is no project Portal_Content mounted under gatherer application 429fa2b4-cfd4-4225-97da-f63c3f2f04d3.
    4. Failed to connect to fastsrvr.domainone.website.no:13390 Failed to initialize session with document engine: Unable to resolve Contentdistributor
    5. An exception occurred while updating addresses for connected app {274c1300-bb33-47a7-83bc-a66b1eda9e81_783d8c1d-9a55-468a-8150-b12105ff2b33}. The uri endpoint information may be stale. System.InvalidOperationException:
    The requested application could not be found.
    The errors appears often, and sometimes in another order.
    I have checked the fw, and there is an ongoing communication on the 13391/13390 ports. I don't know where the problem lies. All services are running on the FAST-server, and seemlingly also on the SP server. I have
    tried restarting both servers to no avail.
    Anyone?

    DB:2.19:Lost Connection To My Search App - Errors xd

    Hi,
    There are two common causes of this:
    - The FAST server disks are full or have issues
    - Antivirus software is halting FAST
    Can you investigate if eitherof the two occurring?
    Thanks!
    Rob Vazzana
    | Microsoft | Enterprise Search Group |Senior SupportEngineer
    |
    http://www.microsoft.com/enterprisesearch

  • RELEVANCY SCORE 2.19

    DB:2.19:Workstation Node Assigning Template Error fd


    Dear All:
    Yesterday, I installed 3 workstations (all Win7 Professional x64). One was smoothly without any issue; the second popped some error during provisioning, and then uninstalled and re-installed with the domain-Admin account, went well then; the third one popped
    the same error as the second one during provisioning, uninstall/reinstall with the domain-Admin account many times, still gives the same error. The key error message is :
    08/05/2011 9:59:31 AMSubscribedCores
    08/05/2011 9:59:31 AMNested operation with ID 052663ae-70f3-48db-9082-7dfa130d51ea failed
    And the following is the whole provisioning log copied out. Thank you so much for possible help with this.
    TimeMessage
    08/05/2011 9:59:53 AMThe operation failed due to errors during execution.
    08/05/2011 9:59:53 AMUpdating processor information
    08/05/2011 9:59:53 AMFetching processor information.
    08/05/2011 9:59:53 AMRemoving obsolete interface TcpipInterfaces from computer MyDomain\PERSEUS
    08/05/2011 9:59:53 AMFound new interface Local Area Connection 2 on computer MyDomain\PERSEUS
    08/05/2011 9:59:53 AMFiltering interface Loopback Pseudo-Interface 1 out (loopback or tunnel device)
    08/05/2011 9:59:53 AMFiltering interface Local Area Connection* 11 out (loopback or tunnel device)
    08/05/2011 9:59:53 AMFiltering interface isatap.MyDomain.com out (loopback or tunnel device)
    08/05/2011 9:59:53 AMFound new interface Local Area Connection on computer MyDomain\PERSEUS
    08/05/2011 9:59:53 AMDiscovering interfaces on computer MyDomain\PERSEUS
    08/05/2011 9:59:53 AMSubscribedCores
    08/05/2011 9:59:53 AMNested operation with ID 916a236b-acff-43dc-9000-17e7ed5fe1de failed
    08/05/2011 9:59:52 AMDiscovering the configuration of node MyDomain\PERSEUS
    08/05/2011 9:59:42 AMRetrying operation, retry count 2
    08/05/2011 9:59:42 AMUpdating processor information
    08/05/2011 9:59:42 AMFetching processor information.
    08/05/2011 9:59:42 AMRemoving obsolete interface TcpipInterfaces from computer MyDomain\PERSEUS
    08/05/2011 9:59:42 AMFound new interface Local Area Connection 2 on computer MyDomain\PERSEUS
    08/05/2011 9:59:42 AMFiltering interface Loopback Pseudo-Interface 1 out (loopback or tunnel device)
    08/05/2011 9:59:42 AMFiltering interface Local Area Connection* 11 out (loopback or tunnel device)
    08/05/2011 9:59:42 AMFiltering interface isatap.MyDomain.com out (loopback or tunnel device)
    08/05/2011 9:59:42 AMFound new interface Local Area Connection on computer MyDomain\PERSEUS
    08/05/2011 9:59:42 AMDiscovering interfaces on computer MyDomain\PERSEUS
    08/05/2011 9:59:42 AMSubscribedCores
    08/05/2011 9:59:42 AMNested operation with ID 8dcbb25d-6c67-419e-b322-e5599b0b0165 failed
    08/05/2011 9:59:41 AMDiscovering the configuration of node MyDomain\PERSEUS
    08/05/2011 9:59:31 AMRetrying operation, retry count 1
    08/05/2011 9:59:31 AMUpdating processor information
    08/05/2011 9:59:31 AMFetching processor information.
    08/05/2011 9:59:31 AMRemoving obsolete interface TcpipInterfaces from computer MyDomain\PERSEUS
    08/05/2011 9:59:31 AMFound new interface Local Area Connection 2 on computer MyDomain\PERSEUS
    08/05/2011 9:59:31 AMFiltering interface Loopback Pseudo-Interface 1 out (loopback or tunnel device)
    08/05/2011 9:59:31 AMFiltering interface Local Area Connection* 11 out (loopback or tunnel device)
    08/05/2011 9:59:31 AMFiltering interface isatap.MyDomain.com out (loopback or tunnel device)
    08/05/2011 9:59:31 AMFound new interface Local Area Connection on computer MyDomain\PERSEUS
    08/05/2011 9:59:31 AMDiscovering interfaces on computer MyDomain\PERSEUS
    08/05/2011 9:59:31 AMSubscribedCores
    08/05/2011 9:59:31 AMNested operation with ID 052663ae-70f3-48db-9082-7dfa130d51ea failed
    08/05/2011 9:59:29 AMDiscovering the configuration of node MyDomain\PERSEUS
    08/05/2011 9:59:24 AMAssigning template Test Workstation Template to node PERSEUS
    08/05/2011 9:59:24 AMChecking the configuration of node MyDomain\PERSEUS
    08/05/2011 9:59:24 AMAssociating template Test Workstation Template with node MyDomain\PERSEUS
    08/05/2011 9:59:24 AMMoving node MyDomain\PERSEUS from state Unknown to state ProvisioningFeng Wang

    DB:2.19:Workstation Node Assigning Template Error fd

    Hi Guys!
    It happened that I fixed the error. So I just post my solution here in case other people also met this issue.
    The fresh install on the third workstation is the SP2 patched version. While the HeadNode was not. We patched the head node, AND reboot the workstation, immediately everything worked.
    The one that SP2 patched is from the following link, it is definitely easier if you could make sure all the installations are from the same image include the head, compute, broker, workstation.
    http://download.microsoft.com/download/4/3/0/430F2F6D-7BCF-4717-93CD-7739735458F4/HPCPack.Express.iso
    Thank you all for taking your time reading this.

    Feng Wang

  • RELEVANCY SCORE 2.19

    DB:2.19:No Navigator With Name Name Was Found xk


    Hi all,
    On a FAST farm I have a lot of Warnings:
    1. Event 1000, FAST Search Farm QRServer: No navigator with name 'xxx' was found.
    2. Event 1000, FAST Search Farm WAPartialUpdater: Could not send batch to content distributor, will retry automatically. Reason given: create_session() failed: unable to create session with master contentdistributor.
    Everything is working on the farm.
    Could someone point how to resolve this?
    Thanks.

    OvidiuG

    DB:2.19:No Navigator With Name Name Was Found xk

    Hi Patrick,
    Many thanks for your response.
    However, your proposed actions has been already performed, but warnings are still there.
    OvidiuG

  • RELEVANCY SCORE 2.19

    DB:2.19:Proplem With Htttps://[Mydomain] z8





    I created a new client a while ago who has a number of sub-domains and now they would like to use SSL .... although the SSL box is ticked I can not get the browser to see https://www.triplentry.com/index.html ... there is no problem with http://www.triplentry.com/index.html.

    Could anyone point me in the write direction to resolve the problem.

    DB:2.19:Proplem With Htttps://[Mydomain] z8







    Yes we are using shared IP address ... all the sites (only a dozen or so) on this box are using the same IP address

  • RELEVANCY SCORE 2.19

    DB:2.19:Need Some Assistance On Sending Mail Via Oracle Applications sx


    Hi all,

    I am having R12 installed in my test server which is working with 10g AS and 11.1.0 database in an OEL 5.4. I am able to perform the below command at OS level successully:

    mailx -v root ( from Oracle user and it works perfectly and the mail is viewable at /var/mail/root),

    But when issue mailx -v username@mydomain.com (this does not delivers the mail to the respective recipient although the I get the following output:

    username@mydomain... Connecting to [127.0.0.1] via relay...
    220 lab01.mydomain ESMTP Sendmail 8.13.8/8.13.8; Wed, 9 Jun 2010 16:23:11 +0530
    EHLO lab01.mydomain
    250-lab01.mydomain Hello lab01 [127.0.0.1], pleased to meet you
    250-ENHANCEDSTATUSCODES
    250-PIPELINING
    250-8BITMIME
    250-SIZE
    250-DSN
    250-ETRN
    250-DELIVERBY
    250 HELP
    MAIL From:oracle@lab01.mydomain SIZE=46
    250 2.1.0 oracle@lab01.mydomain... Sender ok
    RCPT To:username@lmydomain
    DATA
    250 2.1.5 username@lmydomain... Recipient ok
    354 Enter mail, end with "." on a line by itself
    .
    250 2.0.0 o59ArB6Z032567 Message accepted for delivery
    asif@asianalliance.lk... Sent (o59ArB6Z032567 Message accepted for delivery)
    Closing connection to [127.0.0.1]
    QUIT
    221 2.0.0 lab01.mydomain closing connection

    I know and have configured a database to send mails in times of need in a simple two tier achitecture that is where you have the Client and the database, but since I dont have any prior experience in configuring them in a 3 tier Architecture ( which has Oracle Application server and Applications in addition to the two architecture), I am not sure whether the same logic could be applied here.

    Any assistance with regard to this will be greatly appreciated.

    Warm Regards,
    Asif Muhammad

    DB:2.19:Need Some Assistance On Sending Mail Via Oracle Applications sx

    Hi Asif,

    Your log shows that the email is successfully submitted - check your mail server setup. Also if you have multiple nodes, try the same on the concurrent processing (as opposed to the database) node as the user running the services if that is where you are running the email from.

    Regards,
    Gareth

  • RELEVANCY SCORE 2.19

    DB:2.19:How To Use Single-User Mode In An Etl Package? mp


    I just tried putting ALTER DATABASE {dbname} SET SINGLE_USER WITH ROLLBACK IMMEDIATE in an Execute SQL Task before my data flow task, but I got an OLEDB error during execution: Login failed for {myDomain\myWindowsUserName}.
    The connection managers within the package were all using my windows login, so I suppose what this means is that SSIS useda system login to execute the ALTER DATABASE statement, which then prevented further access to the database by my connection managers.

    Am I right? Should I change the login that my connection managers use?
    (Nb.I ran the package from BIDS, so the problem could become more complicated when I deploy the package and try to run it with DTEXEC or SQL Server Agent.)
    Isthere is a better way to lock users out, temporarily?

    DB:2.19:How To Use Single-User Mode In An Etl Package? mp

    I Koen,
    I am trying this now, but I have a new problem (which I will post separately) that is stopping me.

  • RELEVANCY SCORE 2.19

    DB:2.19:Exception In Accessing A Jsp Help dm


    Hi,

    I have several servers running my application without any problems. But
    on one machine I get the following error when I go to see the page. Can
    anybody please explain what could be the cause of it?
    I'm using Windows2K and WL6sp2

    Thank You,
    Saman

    Compilation of
    'C:\bea\wlserver6.0\config\mydomain\applications\.wl_temp_do_not_delete\WEB-
    INF\_tmp_war_myserver_myserver_war-eadirect\jsp_servlet\_admin\_jsp\_mainfra
    me.java' failed:
    ----------------------------------------------------------------------------
    ----
    (Failed to parse compiler output. See full output below).
    ----------------------------------------------------------------------------
    ----
    Full compiler error(s):
    java.io.IOException: CreateProcess: javac -classpath
    C:\bea\wlserver6.0\config\mydomain\applications\.wl_temp_do_not_delete\wl_lo
    cal_comp7370.war;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_
    do_not_delete\WEB-INF\_tmp_war_myserver_myserver_war-eadirect\997989600232ed
    x_client.jar;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_n
    ot_delete\WEB-INF\_tmp_war_myserver_myserver_war-eadirect\997989600242cos.ja
    r;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_not_delete\W
    EB-INF\_tmp_war_myserver_myserver_war-eadirect\997989600242javachart.jar;C:\
    bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_not_delete\WEB-IN
    F\_tmp_war_myserver_myserver_war-eadirect;C:\bea\wlserver6.0\config\mydomain
    \applications\.wl_temp_do_not_delete\WEB-INF\_tmp_war_myserver_myserver_war-
    eadirect;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_not_d
    elete\wl_local_comp7340.jar;C:\bea\wlserver6.0\.\config\mydomain\application
    s\.wl_temp_do_not_delete\wl_local_comp7342.jar;C:\bea\wlserver6.0\.\config\m
    ydomD
    at java.lang.Win32Process.create(Native Method)
    at java.lang.Win32Process.init(Win32Process.java:66)
    at java.lang.Runtime.execInternal(Native Method)
    at java.lang.Runtime.exec(Runtime.java:551)
    at java.lang.Runtime.exec(Runtime.java:477)
    at java.lang.Runtime.exec(Runtime.java:443)
    at weblogic.utils.Executable.exec(Executable.java:144)
    at weblogic.utils.Executable.exec(Executable.java:108)
    at
    weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.jav
    a:555)
    at
    weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:354)
    at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:359)
    at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
    at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:148)
    at
    weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:30
    6)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :208)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:1265)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :1631)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

    DB:2.19:Exception In Accessing A Jsp Help dm

    Hi,

    I have several servers running my application without any problems. But
    on one machine I get the following error when I go to see the page. Can
    anybody please explain what could be the cause of it?
    I'm using Windows2K and WL6sp2

    Thank You,
    Saman

    Compilation of
    'C:\bea\wlserver6.0\config\mydomain\applications\.wl_temp_do_not_delete\WEB-
    INF\_tmp_war_myserver_myserver_war-eadirect\jsp_servlet\_admin\_jsp\_mainfra
    me.java' failed:
    ----------------------------------------------------------------------------
    ----
    (Failed to parse compiler output. See full output below).
    ----------------------------------------------------------------------------
    ----
    Full compiler error(s):
    java.io.IOException: CreateProcess: javac -classpath
    C:\bea\wlserver6.0\config\mydomain\applications\.wl_temp_do_not_delete\wl_lo
    cal_comp7370.war;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_
    do_not_delete\WEB-INF\_tmp_war_myserver_myserver_war-eadirect\997989600232ed
    x_client.jar;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_n
    ot_delete\WEB-INF\_tmp_war_myserver_myserver_war-eadirect\997989600242cos.ja
    r;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_not_delete\W
    EB-INF\_tmp_war_myserver_myserver_war-eadirect\997989600242javachart.jar;C:\
    bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_not_delete\WEB-IN
    F\_tmp_war_myserver_myserver_war-eadirect;C:\bea\wlserver6.0\config\mydomain
    \applications\.wl_temp_do_not_delete\WEB-INF\_tmp_war_myserver_myserver_war-
    eadirect;C:\bea\wlserver6.0\.\config\mydomain\applications\.wl_temp_do_not_d
    elete\wl_local_comp7340.jar;C:\bea\wlserver6.0\.\config\mydomain\application
    s\.wl_temp_do_not_delete\wl_local_comp7342.jar;C:\bea\wlserver6.0\.\config\m
    ydomD
    at java.lang.Win32Process.create(Native Method)
    at java.lang.Win32Process.init(Win32Process.java:66)
    at java.lang.Runtime.execInternal(Native Method)
    at java.lang.Runtime.exec(Runtime.java:551)
    at java.lang.Runtime.exec(Runtime.java:477)
    at java.lang.Runtime.exec(Runtime.java:443)
    at weblogic.utils.Executable.exec(Executable.java:144)
    at weblogic.utils.Executable.exec(Executable.java:108)
    at
    weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.jav
    a:555)
    at
    weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:354)
    at weblogic.servlet.jsp.JspStub.compilePage(JspStub.java:359)
    at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:180)
    at weblogic.servlet.jsp.JspStub.prepareServlet(JspStub.java:148)
    at
    weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:30
    6)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :208)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:1265)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :1631)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)

  • RELEVANCY SCORE 2.18

    DB:2.18:How To Access Custom Mbeanserver? ma


    I created an custom MBeanServer by using

    MBeanServerFactory.createMBeanServer("mydomain");

    How to get a connection of this MBeanServer in a stanalone java program which is running in different jvm?

    Thank
    Sree

    DB:2.18:How To Access Custom Mbeanserver? ma

    I created an custom MBeanServer by using

    MBeanServerFactory.createMBeanServer("mydomain");

    How to get a connection of this MBeanServer in a stanalone java program which is running in different jvm?

    Thank
    Sree

  • RELEVANCY SCORE 2.18

    DB:2.18:Re: Ref This Code:/Logout?Goto=/Login/Anonymous?Domain=Mydomain, I Have Tried It Out Exactly In The Menubar.Html But It Could Not Work. Anyone Could Help Me On This? Thank You. cz


    could you please refine the question?

  • RELEVANCY SCORE 2.18

    DB:2.18:Unable To Start The Fast Search For Sharepoint Sam Admin Service ak


    Hi,
    FAST Search server is working fine past six month. since yesterday, all FAST Search for SharePoint services (Monitoring, QRProxy, SAM Admin, SAM Worker) are stopped and couldn't be started back again (except Fast Search for SharePoint service) and below
    error keep logging to event log. I have removed proxy setting in Internet explorer according to the blog (http://brulan.wordpress.com/2011/05/). But still no luck.
    WebHost failed to process a request.
    Sender Information: System.ServiceModel.ServiceHostingEnvironmentHostingManager/33711845
    Exception: System.ServiceModel.ServiceActivationException: The service '/SchemaService.svc' cannot be activated due to an exception during compilation. The exception message is: Exception has been thrown by the target of an invocation.. ---
    System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. --- no.fast.middleware.SystemException: Unable to connect to the remote server --- System.Net.WebException: Unable to connect to the remote server
    --- System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.xx.xx.xx:13390
    at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket socket, IPAddress address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception exception)
    --- End of inner exception stack trace ---
    at System.Net.HttpWebRequest.GetRequestStream(TransportContext context)
    at System.Net.HttpWebRequest.GetRequestStream()
    at no.fast.middleware.ConnectionManager.ExecuteMethod(HttpWebRequest request, MemoryStream dataStream)
    at no.fast.dsinterfaces.nameservice.NameserverStub.Resolve(String Name, String InterfaceType, String Version)
    --- End of inner exception stack trace ---
    at no.fast.dsinterfaces.nameservice.NameserverStub.Resolve(String Name, String InterfaceType, String Version)
    at no.fast.dsinterfaces.configservice.ConfigFactory.ResolveConfig(IMiddleware middleware, String name)
    at no.fast.dsinterfaces.configservice.ConfigFactory.CreateConfig(IMiddleware middleware, String name, Int32 retries, Int32 retryIntervalSeconds, Int32 clientTimeoutMs)
    at no.fast.dsinterfaces.configservice.ConfigFactory.CreateConfig(IMiddleware middleware, String name)
    at Microsoft.SharePoint.Search.Extended.Administration.WCF.SchemaServiceImpl.verifyMiddlewareConfig()
    at Microsoft.SharePoint.Search.Extended.Administration.WCF.SchemaServiceImpl..ctor()
    --- End of inner exception stack trace ---
    at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct signature, IntPtr declaringType)
    at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
    at System.ServiceModel.Description.ServiceDescription.CreateImplementation(Type serviceType)
    at System.ServiceModel.Description.ServiceDescription.SetupSingleton(ServiceDescription serviceDescription, Object implementation, Boolean isWellKnown)
    at System.ServiceModel.Description.ServiceDescription.GetService(Type serviceType)
    at System.ServiceModel.ServiceHost.CreateDescription(IDictionary`2 implementedContracts)
    at System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses)
    at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses)
    at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses)
    at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath)
    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)
    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
    --- End of inner exception stack trace ---
    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
    at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)
    Process Name: w3wp
    Process ID: 396

    Any replied or suggestion will be highly appreciated.
    kmhsad

    DB:2.18:Unable To Start The Fast Search For Sharepoint Sam Admin Service ak

    Hi,
    I solved the issue from this blog (http://blogs.like10.com/2012/10/22/fast-search-for-sharepoint-cannot-start-service-fastsearchmonitoring-on-computer/).
    Thankskmhsad

  • RELEVANCY SCORE 2.18

    DB:2.18:Webanalyzer zd


    Hi
    I have installed FAST with1 adminserver and 2 non-admin servers. In my event log on the adminserveras well as the syslog - all.log file I am getting the following error repeatedly:
    [2010-09-27 14:44:13] WARNING :
    configserver@servername:13250: systemmsg: Module (WebAnalyzer) at servername.FQDN:13300 is not responding
    the nctrl status shows:

    Module Name Process Name PID Status
    ------------------------------ -------------------- -------- --------------
    Config Server configserver 2428 Running
    Content Distributor contentdistributor 2692 Running
    FDMWorker fdmworker 3592
    Running
    Indexing Dispatcher indexingdispatcher 2108 Running
    Name Service nameservice 1388 Running
    Document Processor procserver_1 3984 Running
    Document Processor procserver_2 4008 Running
    SAM Admin samadmin
    Running
    SAM Worker samworker
    Running
    Automatic spellcheck tuning spelltuner 3916 Running
    SPRel sprel
    3864 Running
    WALinkStorerReceiver walinkstorerreceiver 3772 Running
    WALookupDB walookupdb0 3684 Running
    WebAnalyzer webanalyzer 3816 Running
    Everything seems to check out. Any ideas as to what could be causing this?

    Thanks

    DB:2.18:Webanalyzer zd

    I'm having a similar error.
    Event log has Event 1000 and WebAnalyzer not responding.
    WAADMIN showconfig or showrun but get:
    Error: Could not connect to WebAnalyzer
    Here is my deployment file:

    ?xml version=1.0 encoding=utf-8 ?
    deployment comment=2 node FAST Search farm configuration xmlns=http://www.microsoft.com/enterprisesearch
    instanceidFASTSearch/instanceid
    connector-databaseconnectionstring /
    host name=Fast01.deltaeducation.local
    admin /
    indexing-dispatcher /
    content-distributor /
    webanalyzer server=true link-processing=true lookup-db=true /
    document-processor processes=2 /
    /host
    host name=Fast02.deltaeducation.local
    searchengine row=0 column=0 /
    query /
    /host
    searchcluster
    row id=0 index=primary search=true /
    /searchcluster
    /deployment

    I'm able to feed documents into my configuration and find them, however the crawls don't appear to be adding any documents.

  • RELEVANCY SCORE 2.18

    DB:2.18:Plesk Panel 11 Mail Server Not Working pc





    Hi Plesk!

    My Plesk V. 11.x
    I sended email. but not send! I sended mail. waiting queue.. Tools Settings - Mail Server Settings - Mail Queue

    What/How Can I do?
    Thank you!

    /usr/local/psa/var/log

    Mar 13 16:35:06 mydomain courier-pop3d: LOGIN FAILED, user=viviana@mydomain.com, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:11 mydomain courier-pop3d: Disconnected, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:12 mydomain postfix/smtpd[14990]: connect from unknown[119.188.3.57]
    Mar 13 16:35:12 mydomain postfix/smtpd[14990]: lost connection after UNKNOWN from unknown[119.188.3.57]
    Mar 13 16:35:12 mydomain postfix/smtpd[14990]: disconnect from unknown[119.188.3.57]
    Mar 13 16:35:12 mydomain courier-pop3d: Connection, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:13 mydomain authpsa[13790]: No such user test@mydomain.com in mail authorization database
    Mar 13 16:35:13 mydomain courier-pop3d: LOGIN FAILED, user=test@mydomain.com, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:19 mydomain courier-pop3d: Disconnected, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:19 mydomain postfix/smtpd[14990]: connect from unknown[119.188.3.57]
    Mar 13 16:35:20 mydomain postfix/smtpd[14990]: lost connection after UNKNOWN from unknown[119.188.3.57]
    Mar 13 16:35:20 mydomain postfix/smtpd[14990]: disconnect from unknown[119.188.3.57]
    Mar 13 16:35:20 mydomain courier-pop3d: Connection, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:21 mydomain authpsa[13791]: No such user test4@mydomain.com in mail authorization database
    Mar 13 16:35:21 mydomain courier-pop3d: LOGIN FAILED, user=test4@mydomain.com, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:28 mydomain courier-pop3d: Disconnected, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:29 mydomain postfix/smtpd[14990]: connect from unknown[119.188.3.57]
    Mar 13 16:35:31 mydomain postfix/smtpd[14990]: lost connection after UNKNOWN from unknown[119.188.3.57]
    Mar 13 16:35:31 mydomain postfix/smtpd[14990]: disconnect from unknown[119.188.3.57]
    Mar 13 16:35:32 mydomain courier-pop3d: Connection, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:33 mydomain authpsa[13792]: No such user test4@mydomain.com in mail authorization database
    Mar 13 16:35:33 mydomain courier-pop3d: LOGIN FAILED, user=test4@mydomain.com, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:40 mydomain courier-pop3d: Disconnected, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:40 mydomain postfix/smtpd[14990]: connect from unknown[119.188.3.57]
    Mar 13 16:35:42 mydomain postfix/smtpd[14990]: lost connection after UNKNOWN from unknown[119.188.3.57]
    Mar 13 16:35:42 mydomain postfix/smtpd[14990]: disconnect from unknown[119.188.3.57]
    Mar 13 16:35:43 mydomain courier-pop3d: Connection, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:44 mydomain authpsa[13792]: No such user admin@mydomain.com in mail authorization database
    Mar 13 16:35:44 mydomain courier-pop3d: LOGIN FAILED, user=admin@mydomain.com, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:49 mydomain courier-pop3d: Disconnected, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:50 mydomain postfix/smtpd[14990]: connect from unknown[119.188.3.57]
    Mar 13 16:35:50 mydomain postfix/smtpd[14990]: lost connection after UNKNOWN from unknown[119.188.3.57]
    Mar 13 16:35:50 mydomain postfix/smtpd[14990]: disconnect from unknown[119.188.3.57]
    Mar 13 16:35:50 mydomain courier-pop3d: Connection, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:51 mydomain authpsa[13792]: No such user info@mydomain.com in mail authorization database
    Mar 13 16:35:51 mydomain courier-pop3d: LOGIN FAILED, user=info@mydomain.com, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:57 mydomain courier-pop3d: Disconnected, ip=[::ffff:119.188.3.57]
    Mar 13 16:35:57 mydomain postfix/smtpd[14990]: connect from unknown[119.188.3.57]
    Mar 13 16:35:58 mydomain postfix/smtpd[14990]: lost connection after UNKNOWN from unknown[119.188.3.57]
    Mar 13 16:35:58 mydomain postfix/smtpd[14990]: disconnect from unknown[119.188.3.57]
    Mar 13 16:35:58 mydomain courier-pop3d: Connection, ip=[::ffff:119.188.3.57]
    Mar 13 16:36:00 mydomain authpsa[13788]: No such user info@mydomain.com in mail authorization database
    Mar 13 16:36:00 mydomain courier-pop3d: LOGIN FAILED, user=info@mydomain.com, ip=[::ffff:119.188.3.57]

  • RELEVANCY SCORE 2.18

    DB:2.18:Problems With Index Agent za


    Hi,Status in DA reoirts that my index agent is not responding. I found this in all.log:Mainly it is "No response from the config server".When I click properties near FAST FullText Engine Configuration I can see that the table at the end of the page (with column names Collection name, Description, Cluster, Pipeline) is empty.I have Documentum CS 5.3 SP2.all.log:[2008-01-04 16:21:15] INFO : searchctrl-search@dcs:15602: systemmsg: Error communicating with indexer: ''. Will continue with currently active indicies.[2008-01-04 16:21:15] INFO : searchctrl-search@dcs:15602: systemmsg: Index 0_1 started in standalone mode.[2008-01-04 16:21:15] INFO : searchctrl-search@dcs:15602: systemmsg: Index 1_1 started in standalone mode.[2008-01-04 16:21:15] INFO : searchctrl-search@dcs:15602: systemmsg: Index 2_0 started in standalone mode.[2008-01-04 16:21:19] WARNING : searchctrl-search@dcs:15602: systemmsg: No response from the config server. Retrying for 30 seconds........[2008-01-04 16:34:03] WARNING : searchctrl-dispatch@dcs:15152: systemmsg: Could not bind to config service fds/configservice: Exception resolving.[2008-01-04 16:34:03] WARNING : searchctrl-dispatch@dcs:15152: systemmsg: The last message was repeated 2 times[2008-01-04 16:34:03] INFO : searchctrl-dispatch@dcs:15152: systemmsg: No config server available. Assuming 64 columns.[2008-01-04 16:34:33] WARNING : searchctrl-dispatch@dcs:15152: systemmsg: Could not bind to config service fds/configservice: Exception resolving.[2008-01-04 16:34:33] WARNING : searchctrl-dispatch@dcs:15152: systemmsg: The last message was repeated 2 times[2008-01-04 16:34:33] INFO : searchctrl-dispatch@dcs:15152: systemmsg: No config server available. Assuming 64 columns.[2008-01-04 16:34:35] WARNING : NodeController@dcs:16015: systemmsg: Process configserver was not running, restarting it[2008-01-04 16:34:35] INFO : NodeController@dcs:16015: systemmsg: Security is disabled for process [configserver][2008-01-04 16:34:35] STATUS : NodeController@dcs:16015: systemmsg: Starting C:\DOCSER~1\fulltext\INDEXS~1\bin\configserver.exe[2008-01-04 16:34:36] STATUS : ConfigServer@dcs:16005: systemmsg: ConfigServer starting[2008-01-04 16:34:36] STATUS : ConfigServer@dcs:16005: systemmsg: Checking out Fast Data Search configserver license[2008-01-04 16:34:36] STATUS : ConfigServer@dcs:16005: systemmsg: License checkout OK[2008-01-04 16:34:36] STATUS : ConfigServer@dcs:16005: systemmsg: Reading configuration from: C:\DOCSER~1\fulltext\INDEXS~1\etc\CSConfig.xml[2008-01-04 16:34:36] STATUS : ConfigServer@dcs:16005: systemmsg: Reading configuration from: C:\DOCSER~1\fulltext\INDEXS~1\etc\PipelineConfig.xml[2008-01-04 16:34:36] STATUS : ConfigServer@dcs:16005: systemmsg: Reading configuration from: C:\DOCSER~1\fulltext\INDEXS~1\etc\CSUniCfg.xml[2008-01-04 16:34:36] PROGRESS : ConfigServer@dcs:16005: systemmsg: Disabling IP filtering as there is no access file[2008-01-04 16:34:36] INFO : ConfigServer@dcs:16005: systemmsg: Trying to resolve component ContentDistributor as fds/contentdistributor[2008-01-04 16:34:38] INFO : ConfigServer@dcs:16005: systemmsg: CORBA module (ContentDistributor) registered: n/a:0[2008-01-04 16:34:38] INFO : ConfigServer@dcs:16005: systemmsg: Trying to resolve component StatusService as fds/statusservice_0[2008-01-04 16:34:40] INFO : ConfigServer@dcs:16005: systemmsg: CORBA module (StatusService) registered: n/a:0[2008-01-04 16:34:40] STATUS : NodeController@dcs:16015: systemmsg: Process configserver started successfully (pid 6108)[2008-01-04 16:34:40] WARNING : NodeController@dcs:16015: systemmsg: Process procserver_1 was not running, restarting it[2008-01-04 16:34:40] INFO : NodeController@dcs:16015: systemmsg: Security is disabled for process [procserver][2008-01-04 16:34:40] STATUS : NodeController@dcs:16015: systemmsg: Starting C:\DOCSER~1\fulltext\INDEXS~1\bin\procserver.exe[2008-01-04 16:34:40] STATUS : NodeController@dcs:16015: systemmsg: Process procserver_1 started successfully (pid 3340)[2008-01-04 16:34:41] PROGRESS : ProcessorServer@dcs:16200: systemmsg: Disabling IP filtering as there is no access file[2008-01-04 16:34:41] STATUS : ProcessorServer@dcs:16200: systemmsg: Connecting to ConfigServer at dcs:16005..[2008-01-04 16:34:42] FATAL : ConfigServer@dcs:16005: systemmsg: Failed to start ConfigServer: resolve_ex: Failed to get root naming context, nameservice not found[2008-01-04 16:34:43] FATAL : ProcessorServer@dcs:16200: systemmsg: Failed to start ProcessorServer: ConfigServerError: Failed to register with ConfigServer: pyxmlrpcClient.Fault: [Errno 10054] An existing connection was forcibly closed by the remote host[2008-01-04 16:34:43] WARNING : searchctrl-dispatch@dcs:15152: systemmsg: No response from the config server. Retrying for 30 seconds.[2008-01-04 16:34:52] WARNING : searchctrl-search@dcs:15602: systemmsg: No response from the config server. Retrying for 30 seconds.

    DB:2.18:Problems With Index Agent za

    I recently spent a lot of time on something similar, and finally got it resolved. DA was showing not responding, but the agents were actually running correctly. I added the IP address, short name and fully qualified domain name of the content server, application server and full text machine to the hosts file on my content server, application server with da, and my full text machine. I then made sure that I could ping all machines in my environment from each machine, then restarted the full text server. The status in DA now reads correctly and I am able to start/stop the index agents from DA.Support note esg44754 gives the API commands necessary to get the status of the index agents. I was getting 200 (problem) prior to the hosts file additions, then 0 (shutdown) and/or 100 (up and running) after the fix. Very simple and documented in the FTI install docs, but this shows up in a lot of situations.

  • RELEVANCY SCORE 2.18

    DB:2.18:Error Creating Synchronization Connection ap


    I am trying to create a Synchronization connection but it is not working.
    The SharePoint servers belong to SPDomain and all services run with accounts from MyDomain. There is a one-way trust relationshipt between SPDomain and MyDomain.
    When creating a new connection to MyDomain:

    Name: MyConnection
    Type: Active Directory
    Forest Name: MyForest.com
    Specify Domain Controller: My-DC-01
    Authentication provider type: Windows Authentication
    Account Name: MyDomain\ADConnectAccount
    Port 389
    Click Populate containers
    The button grays-out with Querying
    After waiting a long time, the browser's status bar reports an error and nothing populates. (Error message below)
    When I attempt to create a connection for the SPDomain, then it works fine.
    The AD Connection account has the replicate permissions on MyDomain and the UPS service runs with the Farm Account.
    I already tried increasing the timeouts for the LDAPConnectionTimeout and the ImportConnAsyncTimeout with no results.
    What else can I try?

    Thanks in advance.
    ----- error message ------
    Webpage error details
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E)
    Timestamp: Tue, 5 Apr 2011 21:47:30 UTC

    Message: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500
    Line: 5
    Char: 62099
    Code: 0
    URI:
    http://myserver:999/ScriptResource.axd?d=raWEnLSBckiJhpLTEtYC0e8o6esPhl_1NDPmQXGchQ7PXzep7uoOo__fdu_Ye5VMGAFw8e8SiyrkvpXr5TiDH9W0ZMFBh8heHOgAZxazRJn-L9SPwBshAghqqWL7QxN9_1r3V9W3ReCA_3CtPCXTuV-8a1E1t=fffffffff9d85fa6

    DB:2.18:Error Creating Synchronization Connection ap

    I am creating a new connection.
    I have Feb. 2011 Cumulative Update installed.
    The FIM client works fine and I can edit one connection I can create to the SPDomain.
    Still the problem is not resolved.
    Thanks,

  • RELEVANCY SCORE 2.18

    DB:2.18:Webtop Installation In Weblogic pm


    Hello ExpertsI have installed webtop in weblogic atand alone server 8.1The instalaltion directory is E:\bea\user_projects\domains\mydomain\myserver\upload\webtop\webtopNow when i try to copy the custom folder (created for tomcat installation) into the above location webtop\custom and redeploy the applixation and access it i fget following errorNov 1, 2007 1:03:35 PM GMT+05:30 Error HTTP BEA-101018 [ServletContext(id=1793135,name=webtop,context-path=/webtop)] Servlet failed with ServletExceptionjavax.servlet.ServletException: [HTTP:101249][ServletContext(id=1793135,name=webtop,context-path=/webtop)]: Servlet class org.apache.jasper.servlet.JspServlet for servlet JSP-Compiler could not be loaded because the requested class was notfound in the classpath E:\bea\user_projects\domains\mydomain\myserver\upload\webtop\webtop\WEB-INF\classes;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\commons-beanutils.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\commons-collections-3.0.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\commons-fileupload-1.0.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\commons-httpclient-2.0-rc1.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\commons-io-1.0.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\commons-logging.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\dom3-xercesImpl.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\dom3-xml-apis.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\dom4j.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\ldapfilt.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\ldapjdk.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\mail.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\portlet.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\regexp.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\relaxngDatatype.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\taglibs-xtags.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\ucf-server-api.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\ucf-server-impl.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\webwfdeserver.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\XformsChiba.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\XformsEngine.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\xml-ca.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop\jarfiles\WEB-INF\lib\xsdlib.jar;E:\bea\user_projects\domains\mydomain\.\myserver\.wlnotdelete\extract\myserver_webtop_webtop.java.lang.ClassNotFoundException: org.apache.jasper.servlet.JspServlet. at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:834)java.lang.ClassNotFoundException: org.apache.jasper.servlet.JspServlet. at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:834) at weblogic.servlet.internal.ServletStubImpl.getServlet(ServletStubImpl.java:535) at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:373) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.documentum.web.servlet.CompressionFilter.doFilter(CompressionFilter.java:90) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at com.documentum.web.env.WDKController.processRequest(WDKController.java:90) at com.documentum.web.env.WDKController.doFilter(WDKController.java:79) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6724) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3764) at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2644) at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219) at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)Please help on this regard

    DB:2.18:Webtop Installation In Weblogic pm

    Can you remove the custom directory and redploy again with out customization. If it works, then check if you copied all the WEB-INF custom classes also from tomcat instance. If not, set the weblogic.jar in classpath.

  • RELEVANCY SCORE 2.18

    DB:2.18:Clustering A Jms Topic 8z


    I'm trying to create a distributed JMS topic using the wlconfig ant task (MBean).

    I can create a topic on a single server fine, but I can't figure out how to create a distributed topic that I could access on any server in the cluster.

    This is what I have so far, which seems to run, but I can't lookup the topic under the JNDI name in the server,

    wlconfig url="t3://${JEE_HOST}:7001/" username="${JEE_USER}" password="${JEE_PASSWORD}"

    query domain="mydomain" type="Cluster" name="*" property="cluster"/
    query domain="mydomain" type="Server" name="server1" property="server1"/
    query domain="mydomain" type="Server" name="server2" property="server2"/
    query domain="mydomain" type="Server" name="server3" property="server3"/

    create type="JMSConnectionFactory" name="EmployeeTopicConnectionFactory"
    set attribute="JNDIName" value="jms/EmployeeTopicConnectionFactory"/
    set attribute="XAServerEnabled" value="false"/
    set attribute="Targets" value="${cluster}"/
    /create
    create type="JMSServer" name="EmployeeJMSServer1"
    set attribute="Targets" value="${server1}"/
    /create
    create type="JMSServer" name="EmployeeJMSServer2"
    set attribute="Targets" value="${server2}"/
    /create
    create type="JMSServer" name="EmployeeJMSServer3"
    set attribute="Targets" value="${server3}"/
    /create
    create type="JMSDistributedTopic" name="EmployeeTopic"
    set attribute="JNDIName" value="jms/EmployeeTopic"/
    set attribute="LoadBalancingPolicy" value="Random"/
    set attribute="Targets" value="${cluster}"/
    /create

    /wlconfig

    This produces the following in the config.xml

    jms-server
    nameEmployeeJMSServer1/name
    targetserver1/target
    /jms-server
    jms-server
    nameEmployeeJMSServer2/name
    targetserver2/target
    /jms-server
    jms-server
    nameEmployeeJMSServer3/name
    targetserver3/target
    /jms-server
    migratable-target
    nameserver1 (migratable)/name
    notesThis is a system generated default migratable target for a server. Do not delete manually./notes
    user-preferred-serverserver1/user-preferred-server
    clusteremployee-cluster/cluster
    /migratable-target
    migratable-target
    nameserver2 (migratable)/name
    notesThis is a system generated default migratable target for a server. Do not delete manually./notes
    user-preferred-serverserver2/user-preferred-server
    clusteremployee-cluster/cluster
    /migratable-target
    migratable-target
    nameserver3 (migratable)/name
    notesThis is a system generated default migratable target for a server. Do not delete manually./notes
    user-preferred-serverserver3/user-preferred-server
    clusteremployee-cluster/cluster
    /migratable-target
    jms-interop-module
    nameinterop-jms/name
    sub-deployment
    nameEmployeeTopicConnectionFactory/name
    targetemployee-cluster/target
    /sub-deployment
    sub-deployment
    nameEmployeeTopic/name
    targetemployee-cluster/target
    /sub-deployment
    descriptor-file-namejms/interop-jms.xml/descriptor-file-name
    /jms-interop-module

    and the jms interop xml

    connection-factory name="EmployeeTopicConnectionFactory"
    jndi-namejms/EmployeeTopicConnectionFactory/jndi-name
    transaction-params
    xa-connection-factory-enabledfalse/xa-connection-factory-enabled
    /transaction-params
    /connection-factory
    distributed-topic name="EmployeeTopic"
    jndi-namejms/EmployeeTopic/jndi-name
    load-balancing-policyRandom/load-balancing-policy
    /distributed-topic

    DB:2.18:Clustering A Jms Topic 8z

    I'm trying to create a distributed JMS topic using the wlconfig ant task (MBean).

    I can create a topic on a single server fine, but I can't figure out how to create a distributed topic that I could access on any server in the cluster.

    This is what I have so far, which seems to run, but I can't lookup the topic under the JNDI name in the server,

    wlconfig url="t3://${JEE_HOST}:7001/" username="${JEE_USER}" password="${JEE_PASSWORD}"

    query domain="mydomain" type="Cluster" name="*" property="cluster"/
    query domain="mydomain" type="Server" name="server1" property="server1"/
    query domain="mydomain" type="Server" name="server2" property="server2"/
    query domain="mydomain" type="Server" name="server3" property="server3"/

    create type="JMSConnectionFactory" name="EmployeeTopicConnectionFactory"
    set attribute="JNDIName" value="jms/EmployeeTopicConnectionFactory"/
    set attribute="XAServerEnabled" value="false"/
    set attribute="Targets" value="${cluster}"/
    /create
    create type="JMSServer" name="EmployeeJMSServer1"
    set attribute="Targets" value="${server1}"/
    /create
    create type="JMSServer" name="EmployeeJMSServer2"
    set attribute="Targets" value="${server2}"/
    /create
    create type="JMSServer" name="EmployeeJMSServer3"
    set attribute="Targets" value="${server3}"/
    /create
    create type="JMSDistributedTopic" name="EmployeeTopic"
    set attribute="JNDIName" value="jms/EmployeeTopic"/
    set attribute="LoadBalancingPolicy" value="Random"/
    set attribute="Targets" value="${cluster}"/
    /create

    /wlconfig

    This produces the following in the config.xml

    jms-server
    nameEmployeeJMSServer1/name
    targetserver1/target
    /jms-server
    jms-server
    nameEmployeeJMSServer2/name
    targetserver2/target
    /jms-server
    jms-server
    nameEmployeeJMSServer3/name
    targetserver3/target
    /jms-server
    migratable-target
    nameserver1 (migratable)/name
    notesThis is a system generated default migratable target for a server. Do not delete manually./notes
    user-preferred-serverserver1/user-preferred-server
    clusteremployee-cluster/cluster
    /migratable-target
    migratable-target
    nameserver2 (migratable)/name
    notesThis is a system generated default migratable target for a server. Do not delete manually./notes
    user-preferred-serverserver2/user-preferred-server
    clusteremployee-cluster/cluster
    /migratable-target
    migratable-target
    nameserver3 (migratable)/name
    notesThis is a system generated default migratable target for a server. Do not delete manually./notes
    user-preferred-serverserver3/user-preferred-server
    clusteremployee-cluster/cluster
    /migratable-target
    jms-interop-module
    nameinterop-jms/name
    sub-deployment
    nameEmployeeTopicConnectionFactory/name
    targetemployee-cluster/target
    /sub-deployment
    sub-deployment
    nameEmployeeTopic/name
    targetemployee-cluster/target
    /sub-deployment
    descriptor-file-namejms/interop-jms.xml/descriptor-file-name
    /jms-interop-module

    and the jms interop xml

    connection-factory name="EmployeeTopicConnectionFactory"
    jndi-namejms/EmployeeTopicConnectionFactory/jndi-name
    transaction-params
    xa-connection-factory-enabledfalse/xa-connection-factory-enabled
    /transaction-params
    /connection-factory
    distributed-topic name="EmployeeTopic"
    jndi-namejms/EmployeeTopic/jndi-name
    load-balancing-policyRandom/load-balancing-policy
    /distributed-topic

  • RELEVANCY SCORE 2.18

    DB:2.18:Fast Installation Issues fx


    Hi All.
    I have been working on a nice feature that utilizes F4S. My situation is the following:
    I have a single-server development machine, with everything running smoothly. Installation is scripted and the script has been used on a second single-server development machine and things are also working fine here.I want to use FAST only for one
    search center, and stick with Sharepoint Server Search for my other existing stuff. Planning to move all search functionality to FAST, but for now, it will have to be in two steps.
    Problem starts when installingto our PREPROD env.The PREPROD farm consists of 1 appserver and 2 frontends.
    Both development and PREPROD environments use ADFS with a custom claimsprovider. PREPROD is ssl-offloaded with Citrix Netscaler. The development environments are not ssl-offloaded, simply running https.
    I have installed and configured FAST on the appserver (know it is not recommended-but dev is running).

    After an initial crawl (took about2 hours) the crawllog contains 2 success,1 warning and 0 errors. Everyone seems to be happy, but why aren't the thousands of documents crawled? Qrserver can search and find the two items.
    After spending hours of investigating the issue, I am still out of luck. Please could anyone point me in a direction. I have checked the obvious stuff with user permissions, services running, tried to change from 91 to 90, member of FASTAdmin group. I also
    now bypass the netscaler and running https to eliminate that that'sthe issue.
    Ping-SPEnterpriseSearchContentService shows ConnectionSuccess= false on all certificates. The FastSearchCert certificate is installed (and not expired!). I have tried to generate a new, but running securesfastsearchconnector.ps1 ends with the error:
    connection to the contentdistributor domain:13391 could not be validated. Check your certificates and SSA configuration and make sure that instance of Fast search server backend is running
    I can telnet to 13391 so it should not be blocked.
    Nothing alarming in ULS or event viewer-Applications And Services Logs- FAST Search / FAST Search Farm
    Any ideas would be much appreciated.
    Klaus

    DB:2.18:Fast Installation Issues fx

    Hi Patrick.
    Thank you very much for your reply.
    I was aware of the unsupported scenario, however this works fine in my single server dev env.
    Anyways, I have created a dedicated server for FAST and this is my results so far.
    - installed and updated FAST with SP1
    - firewall disabled between FAST and App server.
    - ran post configuration wizard
    - added content source
    - crawled for about 2 minutes, reported 2 successes with the urls
    https://www.mysite.dk and http://www.mysite.dk. Tried to add the contentsource as both http and https with the same result. The site contains more than 100K items.
    - to eliminate ssl offloading issues, I added https binding on the webapp and hits that directly with a entry in the hostfile of the App server
    - eventviewer and sharpoint log doesn't show anything alarming during crawl
    - one thing that puzzles me is that var/log/crawler is not updated during crawl.
    - notice that I haven't created a query application yet, I just want the damn thing to crawl. Also I have a standard sharepoint search application running side by side with the FAST connector, which contains 130Kindexed items.
    - running securefastsearchconnector.ps1 worked like a charm with the message connection to contentdistributor successfully validated
    - i have added other contentsources just for test, and both a fileshare and an external website is beingfilled correctly with a lot of items.
    Have you any idea where to start troubleshooting?
    Cheers
    - Klaus

  • RELEVANCY SCORE 2.17

    DB:2.17:Oam 11gr2 Ovd Useridentitystore Athentication Fails 7j


    Hi all,
    I have setup OVD as a Auth repo for OAM 11gR2. Behind OVD OID is the actual repo, AD will be add later. Here are some details;

    oid adapter base - dc=oid,dc=mydomain,dc=com
    oid remote base - dc=mydomain,dc=com

    During configuration of store in OAM11gR2 I have given User search base as : dc=mydomain, dc=com

    I am getting the following error while trying to login to my protected pages.

    May 11, 2013 6:38:04 AM IST Error oracle.oam.user.identity.provider OAMSSA-20027 Could not get user : test1, idstore: OVDIdentityStore, with exception: oracle.security.idm.OperationFailureException: javax.naming.NamingException: LDAP response read timed out, timeout used:2000ms.; remaining name 'dc=mydomain,dc=com'.

    If I give user base CN=Users,dc=oid,dc=mydomain,dc=com then it is working fine, I cannot do that as leter user will lie in other hierarchy, so I have given the global root - dc=mydomain,dc=com

    is this the correct way? There is no SSL setting I am using anywhere, its a dev only

    Any suggestions on how to get solve this would be appreciated.

    DB:2.17:Oam 11gr2 Ovd Useridentitystore Athentication Fails 7j

    Hi all,
    I have setup OVD as a Auth repo for OAM 11gR2. Behind OVD OID is the actual repo, AD will be add later. Here are some details;

    oid adapter base - dc=oid,dc=mydomain,dc=com
    oid remote base - dc=mydomain,dc=com

    During configuration of store in OAM11gR2 I have given User search base as : dc=mydomain, dc=com

    I am getting the following error while trying to login to my protected pages.

    May 11, 2013 6:38:04 AM IST Error oracle.oam.user.identity.provider OAMSSA-20027 Could not get user : test1, idstore: OVDIdentityStore, with exception: oracle.security.idm.OperationFailureException: javax.naming.NamingException: LDAP response read timed out, timeout used:2000ms.; remaining name 'dc=mydomain,dc=com'.

    If I give user base CN=Users,dc=oid,dc=mydomain,dc=com then it is working fine, I cannot do that as leter user will lie in other hierarchy, so I have given the global root - dc=mydomain,dc=com

    is this the correct way? There is no SSL setting I am using anywhere, its a dev only

    Any suggestions on how to get solve this would be appreciated.

  • RELEVANCY SCORE 2.17

    DB:2.17:[Otp]User Pwd Authentication - Web App Using Vb2005 1m


    Could anyone please help?
    I need to login authenticating the windows user and password
    UserName = txtUserName.text
    UserPassword = txtUserPassword.text
    MyDomain = txtDomain.text
     

    DB:2.17:[Otp]User Pwd Authentication - Web App Using Vb2005 1m

    for asp and web dev questions please use http://forums.asp.net
     
     

  • RELEVANCY SCORE 2.17

    DB:2.17:Error Retrieving User Profile Through Rest a1


    Hi,

    I was trying to retrieve a user's attributes with a token through the REST interface, and I got this message:
    "*exception.name=com.sun.identity.idsvcs.GeneralFailure*"

    if I visit it from code :
    try {
    String url = "http://MYDOMAIN/opensso/identity";
    String token = "THE_TOKEN_FROM_COOKIE";

    token = java.net.URLEncoder.encode(token, "UTF-8");
    url += "/attributes?subjectid=" + token;
    java.net.URL iurl = new java.net.URL(url);
    java.net.URLConnection connection = iurl.openConnection();
    java.io.BufferedReader reader = new java.io.BufferedReader(
    new java.io.InputStreamReader((java.io.InputStream) connection.getContent()));
    String line;
    while ((line = reader.readLine()) != null) {
    System.out.println(line + "br");
    }

    } catch (Throwable e) {
    System.err.println(e);
    }I got this exception:
    *ERROR [STDERR] java.net.UnknownServiceException: no content-type*

    if I try it in the browser directly, I got this on the screen:
    "*exception.name=com.sun.identity.idsvcs.GeneralFailure*"

    Any idea why I could not retrieve the user profile from OpenSSO ? Was that a setup problem of my OpenSSO ?

    Thanks in advance!

  • RELEVANCY SCORE 2.17

    DB:2.17:Connection To Contentdistributor Server.Fqdn:13391 Could Not Be Validated. Check Your Certificates And Ssa Configuration And Make Sure That Instance Of Fast Search Server Backend Is Running. xz


    I'm getting this error after the SSA configuration done,
    Connection to contentdistributor server.fqdn:13391 could not be validated. Check your certificates and ssa configuration and make sure that instance of FAST Search Server backend is running.
    My servers configurations are:
    1. FAST Server SP1 (FASTServer1) : Windows 2008 R2 - Standalone setup (installed admin/client components)connected to SQL DB server (DBServer1)
    2. SharePoint 2010 SP1(SPServer1): Windows 2008 R2 -Farm setup with DBServer1
    I followed the exact steps from the technet article
    http://technet.microsoft.com/en-us/library/ff381243.aspx
    After the Fast server setup, i created SSA in SharePoint, copied over the cert and script and ran the following command
    .\securefastsearchconnector.ps1 -certPath c:\fast\FASTSearchCert.pfx -ssaName FASTContent -username domain\service_farm_account
    Additional check:
    - The FAST serverservices all are running fine.
    - Added exception to Firewall to allow FAST Search ports.
    - Checked FASTSearchCert in both local and trusted location

    Tried changing the port in SSA to 13390 but still got the same error. Nothing in the logs too.

    Doesanyone tested in SharePoint 2010 with SP1 and FAST Search with SP1?
    Cheers, Shafie

    DB:2.17:Connection To Contentdistributor Server.Fqdn:13391 Could Not Be Validated. Check Your Certificates And Ssa Configuration And Make Sure That Instance Of Fast Search Server Backend Is Running. xz

    Thanks for reply, Shafie!
    I am wondering what to check in firewall settings. Can you please elaborate? Firewall is ON. I have also tested by installing on separate instance and getting same error. FYI , our instances are on cloud, OS is Windows Server 2008 R2 DataCenter and all the
    windows updates are already installed. I don't think it has anything to do with it.
    Strange thing is although I am getting this error, I am still able to create FAST center site and also able to search content. so where would I get an issue due to this error?
    Another question is - I have created managed property using FAST powershell script, it got executed successfully but I am not seeing that managed property created in my FAST Query SSA. But when I try to execute same script again it says it is already exist,
    so where did it get created?

    Hitesh

  • RELEVANCY SCORE 2.17

    DB:2.17:Connecting To Tfs Via Eclipse Plugin Configuration Or Connection Issue 19


    I have successfully connected to my service/ directory in visual studio web on windows - now I would like to do the same via eclipse on mac however whenever I try to connect with ....
    the fields are Server, Username, Domain, Password which I have tried many combinations but mostly
    domain: https://[mydomain].visualstudio.com/DefaultCollection/[myproject]
    username: [email]
    Domain: https://[mydomain].visualstudio.com/DefaultCollection/[myproject]
    password: [password]
    I just keeping getting a return message of
    ======================
    The SOAP endpoint
    https..[domain]/TeamFoundation/Administration/v3.0/LocationService.asmx
    could not be contacted. HTTP status 302

    Can someone give me a general idea of what these values should be - I'm out of ideas

    DB:2.17:Connecting To Tfs Via Eclipse Plugin Configuration Or Connection Issue 19

    Hi Migofast,
    Are you able to access
    https://xxx.visualstudio.com/AgileProject/Administration/v3.0/LocationService.asmx directly in the browser?
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. ClickHERE
    to participate the survey. Thanks!

  • RELEVANCY SCORE 2.17

    DB:2.17:Javax.Naming.Namenotfoundexception kf


    Hi,
    I have done the following on the weblogic administration console (I went to
    this console by clicking on the "Start Default Console"):
    1)Define a new Data Source(from Services - JDBC- DataSources)
    2) I defined the following parameters:
    Name:mydomain-dataSource-newPool
    JNDI name:mydomain-dataSource-newPool
    Pool name:newPool
    3)I created the datasource

    Unfortunately, when I try to use the connection pool, I get the following
    error message in the Java program:
    javax.naming.NameNotFoundException:Unable to resolve
    mydomain-dataSource-newPool. Resolved:''
    Unresolved:'mydomain-dataSource-newPool';remaining name' '

    Please help.
    Thanks in advance.
    -Jaya

    DB:2.17:Javax.Naming.Namenotfoundexception kf


    "Vikor" jbhatta@vikor.com wrote in message
    news:3c85284b$1@newsgroups.bea.com...
    Hi,
    Thanks a lot! Indeed I had not assigned the datasource to any target, onceI
    did it started working!
    Thanks a lot again!No problem :)

    Regards,

    Slava Imeshev

    -Jaya

    "Slava Imeshev" imeshev@yahoo.com wrote in message
    news:3c852500@newsgroups.bea.com...
    Hi Vikor,

    Could you check if target is assigned to the datasource?
    DS won't be bound to JNDI tree untill target server is assinged.

    Regards,

    Slava Imeshev

    "Vikor" jbhatta@vikor.com wrote in message
    news:3c85182e@newsgroups.bea.com...
    Hi,
    I have done the following on the weblogic administration console (Iwent
    to
    this console by clicking on the "Start Default Console"):
    1)Define a new Data Source(from Services - JDBC- DataSources)
    2) I defined the following parameters:
    Name:mydomain-dataSource-newPool
    JNDI name:mydomain-dataSource-newPool
    Pool name:newPool
    3)I created the datasource

    Unfortunately, when I try to use the connection pool, I get thefollowing
    error message in the Java program:
    javax.naming.NameNotFoundException:Unable to resolve
    mydomain-dataSource-newPool. Resolved:''
    Unresolved:'mydomain-dataSource-newPool';remaining name' '

    Please help.
    Thanks in advance.
    -Jaya

  • RELEVANCY SCORE 2.17

    DB:2.17:Sharepoint Cross Domain Authentication m8


    Hi,
    I manage a domain (MyDomain) that is trusted by a domain (TheirDomain) in which there is a Sharepoint site I wish to connect to. The trust in place is one way non transitive (i.e. the TheirDomain trusts MyDomain).
    My SPS knowledge is quite limited but from looking around online it seems, in order for the admin in that domain to add individual users from this domain to their SPS site that various changes are required to their SPS instance (involving stsadm commands
    amoung other things).
    In an effort to find the easiest solution, instead of adding each user in MyDomain individually to the SPS server could we have an admin from TheirDomain add a domain security group from MyDomain into a security group in TheirDomain and then allow that security
    group basic read only access to the SPS server.
    Any advice would be appreciated?
    Thanks
    Paul

    DB:2.17:Sharepoint Cross Domain Authentication m8

    The Easiest way would be to add Mydomain Security group directly to share sharepoint site , provided you have set stsadm
    peoplepicker-searchadforests correctly.

    Cheers
    VJ

  • RELEVANCY SCORE 2.17

    DB:2.17:Jsp - Compilation Error kf



    Hi,

    I am getting compilation error while execuing this piece of code
    :

    code pasted here :
    -----------------

    %@ page import="java.sql.*" %
    %
    Connection connection = null;
    Statement statement = null;
    ResultSet results = null;
    try {
    Class.forName("weblogic.jdbc.oci.Driver").newInstance();
    String url = "jdbc:weblogic:oracle:TestDB";
    String query = "SELECT * FROM book_master";
    Connection = DriverManager.getConnection(url, "scott", "tiger");
    statement = connection.createStatement();
    results = statement.executeQuery(query);
    if (results.next()) {
    out.println("book id" + results.getInteger("book_id"));
    out.println("book name" + results.getString("book_name"));
    }
    connection.close();
    }
    catch (ClassNotFoundException e) {
    System.err.println("could not connection to the database!");
    }
    catch (SQLException e) {
    System.err.println("could not connection to the database!");
    }

    %

    ---------****End of pasted code--**************

    The error is pasted here :
    ---------------------

    Compilation of
    'D:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\_tmp_war_myserver_myserver_DefaultWebApp_myserver\jsp_servlet\_helloworld.java'
    failed:
    --------------------------------------------------------------------------------
    D:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\_tmp_war_myserver_myserver_DefaultWebApp_myserver\jsp_servlet\_helloworld.java:87:
    cannot resolve symbol
    probably occurred due to an error in /HelloWorld.jsp line 10:
    Connection = DriverManager.getConnection(url, "scott", "tiger");

    D:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\_tmp_war_myserver_myserver_DefaultWebApp_myserver\jsp_servlet\_helloworld.java:91:
    cannot resolve symbol
    probably occurred due to an error in /HelloWorld.jsp line 14:
    out.println("book id" + results.getInteger("book_id"));

    --------------------------------------------------------------------------------
    Mon Mar 12 15:28:45 GMT+00:00 2001

    --------------***********End of error pasting-------------

    Any clues...

    Thanks,
    Ramu

    DB:2.17:Jsp - Compilation Error kf


    hi kumar,

    Thanks. I got your point. Now its working. It clearly tells between
    experienced one and the inexperienced one, right.

    Thanks,
    Ramu

    Mettu Kumar mettu.kumar@redspark.com wrote:
    There are two compilation errors due to 2 bugs in the
    code.

    1.
    Connection = DriverManager.getConnection(url, "scott",
    "tiger");
    need to be changed to

    connection = DriverManager.getConnection(url, "scott",
    "tiger");
    (you were assigning to class name(caps 'C')

    2.

    out.println("book id" + results.getInteger("book_id"));
    Need to be chagned to
    out.println("book id" + results.getInt("book_id"));

    Note that methoid is getInt and not getInteger.

    Thanks,
    Kumar.
    Ramu wrote:

    Hi,

    I am getting compilation error while execuing this piece
    of code
    :

    code pasted here :
    -----------------

    %@ page import="java.sql.*" %
    %
    Connection connection = null;
    Statement statement = null;
    ResultSet results = null;
    try {
    Class.forName("weblogic.jdbc.oci.Driver").newInstance();
    String url = "jdbc:weblogic:oracle:TestDB";
    String query = "SELECT * FROM book_master";
    Connection = DriverManager.getConnection(url,
    "scott", "tiger");
    statement = connection.createStatement();
    results = statement.executeQuery(query);
    if (results.next()) {
    out.println("book id" + results.getInteger("book_id"));
    out.println("book name" + results.getString("book_name"));
    }
    connection.close();
    }
    catch (ClassNotFoundException e) {
    System.err.println("could not connection
    to the database!");
    }
    catch (SQLException e) {
    System.err.println("could not connection
    to the database!");
    }

    %

    ---------****End of pasted code--**************

    The error is pasted here :
    ---------------------

    Compilation of
    'D:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\_tmp_war_myserver_myserver_DefaultWebApp_myserver\jsp_servlet\_helloworld.java'
    failed:
    --------------------------------------------------------------------------------
    D:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\_tmp_war_myserver_myserver_DefaultWebApp_myserver\jsp_servlet\_helloworld.java:87:
    cannot resolve symbol
    probably occurred due to an error in /HelloWorld.jsp
    line 10:
    Connection = DriverManager.getConnection(url, "scott",
    "tiger");

    D:\bea\wlserver6.0\config\mydomain\applications\DefaultWebApp_myserver\WEB-INF\_tmp_war_myserver_myserver_DefaultWebApp_myserver\jsp_servlet\_helloworld.java:91:
    cannot resolve symbol
    probably occurred due to an error in /HelloWorld.jsp
    line 14:
    out.println("book id" + results.getInteger("book_id"));

    --------------------------------------------------------------------------------
    Mon Mar 12 15:28:45 GMT+00:00 2001

    --------------***********End of error pasting-------------

    Any clues...

    Thanks,
    Ramu

  • RELEVANCY SCORE 2.17

    DB:2.17:500 Error j8


    Hi all
    This Error comes when I am trying to run my sevlet.
    500 internal server error.
    [javax.servlet.ServletException: [HTTP:101249][ServletContext(id=18055287,name=log,context-path=/log)]: Servlet class LoginServlet for servlet LoginServlet could not be loaded because the requested class was not found in the classpath C:\bea\user_projects\mydomain\myserver\upload\log.war;C:\bea\user_projects\mydomain\.\myserver\.wlnotdelete\extract\myserver_log_log\jarfiles\_wl_cls_gen.jar.
    java.lang.UnsupportedClassVersionError: LoginServlet (Unsupported major.minor version 49.0).
    at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:794)

    DB:2.17:500 Error j8

    java.lang.UnsupportedClassVersionError

    http://support.borland.com/entry.jspa?categoryID=359externalID=3706

    This exception can occur when the source is built targeting a JDK that is not supported by the JDK attempting to run it. In the above example, if the servlet was built targeting only JDK 1.5, but the web server runs JDK 1.4, the above exception will occur.

  • RELEVANCY SCORE 2.17

    DB:2.17:Fast Certificates Issue 8p


    Hi Geeks,
    How does the fastSearchcert certificate connect to the fast search server.
    Ping-spentersearchcontentservice seems to connect to the fast server and check the fast searchsert against the fast server
    Is there anyway can figure how the certificates need to be installed and talk to contentdistributor
    How does the contentdistributor communicate please can one give us the details.

    DB:2.17:Fast Certificates Issue 8p

    Hi Geeks,
    How does the fastSearchcert certificate connect to the fast search server.
    Ping-spentersearchcontentservice seems to connect to the fast server and check the fast searchsert against the fast server
    Is there anyway can figure how the certificates need to be installed and talk to contentdistributor
    How does the contentdistributor communicate please can one give us the details.

  • RELEVANCY SCORE 2.17

    DB:2.17:Jdbc Datasource Error With Commons Dbcp cc


    Hi Experts,
    I am implementing connection pooling in my JSP page using the Commons DBCP.

    I am using Tomcat 4.1.29

    My JARs are :
    commons-dbcp-1.1.jar
    commons-pool-1.1.jar
    commons-collections.jar

    which I have placed in TOMCAT_HOME/common/lib/

    My JSPs are in a directory TOMCAT_HOME/webapps/Pools/

    My CLASSPATHS are also appropriately set.

    Here r the parameters in the server.xml which I have in TOMCAT_HOME/conf/ :

    Context path="/Pools/servlet" docBase="Pools" debug="5" reloadable="true" crossContext="true"
    Resource name="jdbc/test_dsn" auth="Container" type="javax.sql.DataSource"/
    ResourceParams name="jdbc/test_dsn"
    parameter
    namefactory/name
    valueorg.apache.commons.dbcp.BasicDataSourceFactory/value
    /parameter

    parameter
    namemaxActive/name !-- To set maximum number of active users --
    value3/value !-- 0 is for no limit --
    /parameter

    parameter
    namemaxIdle/name !-- Set maximum number of idle connections retained in the pool --
    value0/value !-- 0 is for no limit --
    /parameter

    parameter
    namemaxWait/name !-- Maximum time(ms) to wait for a dB connection available --
    value2000/value !-- Set -1 to wait indefinitely : here 10 seconds. --
    /parameter

    !-- MySQL dB username and passwords --
    parameter
    nameusername/name
    valueroot/value
    namepassword/name
    value/value
    /parameter

    !-- Class name for mm.mysql JDBC driver --
    parameter
    namedriverClassName/name
    valueorg.gjt.mm.mysql.Driver/value
    /parameter

    !-- JDBC connection url for the MySQL Database --
    parameter
    nameurl/name
    valuejdbc:mysql://localhost/omamconsultants_com?autoreconnect=true/value
    /parameter

    parameter
    namereturnAbandoned/name !-- Return an abandoned connection back to the pool --
    valuetrue/value
    /parameter

    parameter
    namereturnAbandonedTimeout/name !-- Time to wait before an abandoned connection... --
    value30/value!-- ...is returned to the pool --
    /parameter

    /ResourceParams
    /Context
    !-- ********************************************************* --

    and here's the JSP code in which I implement the connection pooling code :

    %@ page import="java.io.*"%
    %@ page import="javax.servlet.*"%
    %@ page import="javax.servlet.http.*"%
    %@ page import="java.sql.*"%
    %@ page import="javax.naming.Context"%
    %@ page import="javax.naming.InitialContext"%
    %@ page import="javax.sql.DataSource"%

    %
    Context ctx;
    DataSource ds;

    Connection con1;
    Statement stmt;
    ResultSet rs;

    String SQL;

    String mymailid="";
    String mydomain="";

    try
    {
    System.out.println("\n\nCreating the Context...");
    ctx = new InitialContext();
    System.out.println("Context " + ctx + " created.");

    if (ctx == null)
    {
    throw new Exception("No Context !!");
    }

    System.out.println("\nSearching for the DataSource...");
    ds = (DataSource)ctx.lookup("java:comp/env/jdbc/test_dsn");
    System.out.println("DataSource " + ds + " found.");
    System.out.println("DataSource Name : java:comp/env/jdbc/test_dsn");

    System.out.println("\nActivating the Pool for connections...");

    if (ds != null)
    {
    System.out.println("Establishing the connection...");
    con1 = ds.getConnection();
    System.out.println("Obtained " + con1);
    if (con1 != null)
    {
    System.out.println("Connection established.");
    stmt = con1.createStatement();
    SQL = "SELECT * FROM t_sherbir";
    rs = stmt.executeQuery(SQL);
    while (rs.next())
    {
    mymailid=rs.getString(1);
    mydomain=rs.getString(2);
    System.out.println(mymailid + "@" + mydomain);
    }
    }
    else
    {
    System.out.println("The Connection could not be established !!");
    }

    System.out.println("Closing connection " + con1 + "...");
    con1.close();
    System.out.println("Connection closed.");
    }
    }
    catch(Exception e)
    {
    e.printStackTrace();
    }
    %

    and this is the error that I get when I run the JSP :

    org.apache.commons.dbcp.SQLNestedException: Cannot create JDBC driver of class '' for connect URL 'n
    ull', cause:
    java.sql.SQLException: No suitable driver
    at java.sql.DriverManager.getDriver(DriverManager.java:243)
    at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:743)
    at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:518)
    at org.apache.jsp.poolConnectionTest_jsp._jspService(poolConnectionTest_jsp.java:101)
    at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:137)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:210)
    at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:295)
    at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.j
    ava:247)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)

    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Standar
    dPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Standar
    dPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2417)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Standar
    dPipeline.java:643)
    at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Standar
    dPipeline.java:641)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:172)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Standar
    dPipeline.java:641)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
    at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Standar
    dPipeline.java:643)
    at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)
    at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)
    at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:193)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:781)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11P
    rotocol.java:549)
    at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:666)
    at java.lang.Thread.run(Thread.java:536)

    Can any1 help me ? Where am I going wrong ?

    DB:2.17:Jdbc Datasource Error With Commons Dbcp cc

    Hi serlank,
    Talking 2 u after a long time...

    Well I was able 2 solve the problem.

    Actually, I had made a silly mistake : I had specified my server.xml context as :

    Context path="/Pools/servlet" docBase="Pools" debug="5" reloadable="true" crossContext="true"

    But this was the case when I implemented the connection pooling via servlets.

    When I changed 2 JSP, I forgot 2 change the Context path variable appropriately.

    That's what caused the error. So I have now used :

    Context path="/Pools" docBase="Pools" debug="5" reloadable="true" crossContext="true"

    and it just flies like an F-16.

    Hope it helps u also.

    Cheers.

    Sherbir

  • RELEVANCY SCORE 2.17

    DB:2.17:Thread: This Weeks Weather Has Been ........ 3z


    too hot. Wonder if it\'s going to cool off

    -' + '-

    Sewermonger

    -' + '-' + '-' + '-' + '-\\|||/-' + '-' + '-' + '-' + '-' + '-

    -' + '-' + '-' + '-(@@)-' + '-' + '-' + '-' + '-

    ooO_(_)_Ooo________________________________

    _____|_____|_____|_____|_____|_____|_____|_____|

    ___|____|_____|_____|_____|_____|_____|_____|___

    _____|_____ Sewermonger _____|_____

    DB:2.17:Thread: This Weeks Weather Has Been ........ 3z

    In article Sewermonger.2spr50@no-mx.nds_engineer.com,

    Sewermonger.2spr50@no-mx.nds_engineer.com says...

    too hot. Wonder if it\'s going to cool off

    Tomorrow...

    -' + '-

    -' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-

    Visit http:/www.avanti-tech.com for automation/replication solutions...

  • RELEVANCY SCORE 2.17

    DB:2.17:Cluster Server Login Issue zm


    hi all,

    i have installed sql server failover cluster successfully on two nodes , but i can not login to the 1st node neither the second , below my sql cluster details extracted by running

    Cluster Disk 1 SQL Server (NUCACLUSTER) abcapp1 Online
    Cluster Disk 2 SQL Server (NUCACLUSTER) abcapp1 Online
    Cluster Disk 3 Cluster Group abcapp2 Online
    Cluster Disk 4 SQL Server (NUCACLUSTER) abcapp1 Online
    Cluster Disk 5 SQL Server (NUCACLUSTER) abcapp1 Online
    Cluster Disk 6 abc_Dtc abcapp2 Online
    Cluster Disk 7 SQL Server (NUCACLUSTER) abcapp1 Online
    Cluster IP Address Cluster Group abcapp2 Online
    Cluster Name Cluster Group abcapp2 Online
    IP Address 172.16.3.10 abc_Dtc abcapp2 Online
    MSDTC-abc_Dtc abc_Dtc abcapp2 Online
    abc_Dtc abc_Dtc abcapp2 Online
    SQL IP Address 1 (nucacluster) SQL Server (NUCACLUSTER) abcapp1 Online
    SQL Network Name (nucacluster) SQL Server (NUCACLUSTER) abcapp1 Online
    SQL Server (NUCACLUSTER) SQL Server (NUCACLUSTER) abcapp1 Online
    SQL Server Agent (NUCACLUSTER) SQL Server (NUCACLUSTER) abcapp1 Online

    sql server engineagent services using mydomain\sqlas user account, for windows authentication specifyed use mydomain\sqllogin

    how can i connect to sql engine, i cannot copnnect neither windows authentication nor sql server authentication , which user and name i have to use to log in , also such user account has to be on local administrator group on both node or not

    error is inserted

    Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

    thanks for help

    DB:2.17:Cluster Server Login Issue zm


    Thank you,Please quote it as answer.
    Thanks

    Swapna

  • RELEVANCY SCORE 2.17

    DB:2.17:Wls Server Jvm Disappears Mysteriously After Using Management Console sp



    Has anyone had a problem with the server process JVM mysteriously disappearing after
    using the management console? I am able to login to mydomain, configure a JDBC connection
    pool, and then a Tx Data Source. But when I set the chosen target for my Tx Data
    source to mydomain and hit apply, the server dies.

    This has happened with both WLS 7.0 and the new WLP 7.0 installations. I'm running
    WinXP Pro, WLP 7.0, and SQL Server 7.0. I suspect it's a config related issue.

    thanks,
    Ron

    DB:2.17:Wls Server Jvm Disappears Mysteriously After Using Management Console sp


    Ok, I understand that it's not support. When is support for Win XP slated to be available
    then?

    Ron

    Michael Young Reply@ToNewsgroup.Only wrote:
    Definitely a configuration problem. We do not yet support windows XP.
    See the following for
    supported platforms:

    http://edocs.bea.com/wls/platforms/index.html

    Ron Park wrote:

    Has anyone had a problem with the server process JVM mysteriously disappearingafter
    using the management console? I am able to login to mydomain, configurea JDBC connection
    pool, and then a Tx Data Source. But when I set the chosen target formy Tx Data
    source to mydomain and hit apply, the server dies.

    This has happened with both WLS 7.0 and the new WLP 7.0 installations.I'm running
    WinXP Pro, WLP 7.0, and SQL Server 7.0. I suspect it's a config relatedissue.
    thanks,
    Ron--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • RELEVANCY SCORE 2.16

    DB:2.16:Starting Managed Servers Using Nodemanager zx



    When I try to start a manage server using the nodemanager sitting on the same machine
    as the Admin Server and the nodemanager itself, I get the following message:
    Error NodeManager Could not start server 'serverA' via Node Manager - reason:
    '[SecureSocketListener: Could not load certificate '.\\c:\weblogic6.1\wlserver6.1/config/mydomain/demo.crt'
    of type 'RSA' - reason: '.\\c:\weblogic6.1\wlserver6.1/config/mydomain/demo.crt
    (The filename, directory name, or volume label syntax is incorrect)']'

    What's causing this?

    DB:2.16:Starting Managed Servers Using Nodemanager zx


    When I try to start a manage server using the nodemanager sitting on the same machine
    as the Admin Server and the nodemanager itself, I get the following message:
    Error NodeManager Could not start server 'serverA' via Node Manager - reason:
    '[SecureSocketListener: Could not load certificate '.\\c:\weblogic6.1\wlserver6.1/config/mydomain/demo.crt'
    of type 'RSA' - reason: '.\\c:\weblogic6.1\wlserver6.1/config/mydomain/demo.crt
    (The filename, directory name, or volume label syntax is incorrect)']'

    What's causing this?

  • RELEVANCY SCORE 2.16

    DB:2.16:Cannot Log Into Bb Fusion Or Uds sx



    Both were installed using our BES Admin account. I've tried AD domain admin acounts and local admin accounts.

    These are the the errors in the logs :

    2012-06-07 20:19:21.834 ForkJoinPool-1-worker-2 ERROR com.rim.fuse.server.bws.BWSDomain rcspf Caught WebServiceException while trying to execute 'getAuthenticators' on domain "my domainwithin 11ms2012-06-07 20:19:21.835 ForkJoinPool-1-worker-2 ERROR com.rim.fuse.server.bws.BWSDomain rcspf Caught WebServiceException while trying to execute 'getEncodedUsername' on domain "mydomain" within 13ms2012-06-07 20:19:21.835 ForkJoinPool-1-worker-2 WARN com.rim.fuse.server.bes.BESDomain rcspf Could not establish a connection to domain "my domain"2012-06-07 20:19:21.835 qtp9470766-28 ERROR com.rim.fuse.server.rx.FuseRXEngine$ Error occurred during aggregated login: No Domains accepted the credentials.

    I have reinstalled the applcations more than 10 times.I tried fresh installed of 2008 R2 same issues

    Please assist

    DB:2.16:Cannot Log Into Bb Fusion Or Uds sx


    Hi Veect

    Is BMF and UDS installed on the same box? Also the logs below are from BMF login attempt. Since UDS login is failing, can you check and see what login error is logged in the GUI logs for UDS?

  • RELEVANCY SCORE 2.16

    DB:2.16:Ldap Security Authentication In Weblogic Sp4 (Urgent) 79


    We have a web application which interacts to the D/B to authenticate a user during our login process. Now we are trying to change the login to LDAP authentication. Here is the List I did on weblogic configuration correct me if this is correct or if am missing any thing.
    1. Created a Realm
    2. Created a NOVELL LDAP Authenticator (configured user, groups, members, Novell LDAP, Details)
    3. Created a X.509 certificates ????? Do I need to create this one for authentication. The only question is I am confused by these parameters and help me out in figuring out these:
    a. filter attributes = cn=$subj.cn
    b. username attribute = cn
    c. userCertificate;binary ??? ( I have a certificate idmtree.der where do I add configuration about this certificate in the console)
    d. certificate mapping : ou=user,ou=$subj.ou,o=$subj.o,c=$subj.c (IS THIS CORRECT)
    4. created a new Weblogic Default Authorizer...
    5. created a new Weblogic Default Role Mapper...
    6. created a new Weblogic Default Credential Mapper ...(Do I need to setup my certificate inside this credential mapper or not.)

    7. I made this realm as the DEFAULT realm and started the server
    I get the following exception.

    Initializing RoleMapper provider using LDIF template file C:\bea\user_projects\domains\mydomain\.\DefaultRoleMapperInit.ldift.

    The RoleMapper provider has had its LDIF information loaded from: C:\bea\user_projects\domains\mydomain\.\DefaultRoleMapperInit.ldift

    Initializing Authorizer provider using LDIF template file C:\bea\user_projects\domains\mydomain\.\DefaultAuthorizerInit.ldift.

    The Authorizer provider has had its LDIF information loaded from: C:\bea\user_projects\domains\mydomain\.\DefaultAuthorizerInit.ldift

    Loading trusted certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.jks.

    Loading trusted certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts.

    Loading trusted certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.jks.

    Loading trusted certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts.

    Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure.

    Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection - with nested exception:

    [java.lang.reflect.InvocationTargetException - with target exception:

    [netscape.ldap.LDAPException: [Security:090477]Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure. (91)]]

    weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection - with nested exception:

    [java.lang.reflect.InvocationTargetException - with target exception:

    [netscape.ldap.LDAPException: [Security:090477]Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure. (91)]]

    at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:205)

    at weblogic.security.service.PrincipalAuthenticator.init(PrincipalAuthenticator.java:262)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java:581)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:700)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:876)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)

    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)

    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)

    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)

    at weblogic.Server.main(Server.java:32)

    ####Apr 6, 2006 10:42:55 AM CDT Emergency WebLogicServer DXPCHI029398 myserver main WLS Kernel BEA-000342 Unable to initialize the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection - with nested exception:

    [java.lang.reflect.InvocationTargetException - with target exception:

    [netscape.ldap.LDAPException: [Security:090477]Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure. (91)]]

    ANY HELP on this would be greatly appreciated am totally exhausted seeing these error messages from morning.

    I would like to know if I need a client for connecting to this LDAP authenticator. As am using the Novell API to access the LDAP directory. Let me know, and if so can some one provide me a snippet code.\
    Waiting for response.

    thanks in advance
    kiran

    DB:2.16:Ldap Security Authentication In Weblogic Sp4 (Urgent) 79

    We have a web application which interacts to the D/B to authenticate a user during our login process. Now we are trying to change the login to LDAP authentication. Here is the List I did on weblogic configuration correct me if this is correct or if am missing any thing.
    1. Created a Realm
    2. Created a NOVELL LDAP Authenticator (configured user, groups, members, Novell LDAP, Details)
    3. Created a X.509 certificates ????? Do I need to create this one for authentication. The only question is I am confused by these parameters and help me out in figuring out these:
    a. filter attributes = cn=$subj.cn
    b. username attribute = cn
    c. userCertificate;binary ??? ( I have a certificate idmtree.der where do I add configuration about this certificate in the console)
    d. certificate mapping : ou=user,ou=$subj.ou,o=$subj.o,c=$subj.c (IS THIS CORRECT)
    4. created a new Weblogic Default Authorizer...
    5. created a new Weblogic Default Role Mapper...
    6. created a new Weblogic Default Credential Mapper ...(Do I need to setup my certificate inside this credential mapper or not.)

    7. I made this realm as the DEFAULT realm and started the server
    I get the following exception.

    Initializing RoleMapper provider using LDIF template file C:\bea\user_projects\domains\mydomain\.\DefaultRoleMapperInit.ldift.

    The RoleMapper provider has had its LDIF information loaded from: C:\bea\user_projects\domains\mydomain\.\DefaultRoleMapperInit.ldift

    Initializing Authorizer provider using LDIF template file C:\bea\user_projects\domains\mydomain\.\DefaultAuthorizerInit.ldift.

    The Authorizer provider has had its LDIF information loaded from: C:\bea\user_projects\domains\mydomain\.\DefaultAuthorizerInit.ldift

    Loading trusted certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.jks.

    Loading trusted certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts.

    Loading trusted certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.jks.

    Loading trusted certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts.

    Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure.

    Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection - with nested exception:

    [java.lang.reflect.InvocationTargetException - with target exception:

    [netscape.ldap.LDAPException: [Security:090477]Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure. (91)]]

    weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection - with nested exception:

    [java.lang.reflect.InvocationTargetException - with target exception:

    [netscape.ldap.LDAPException: [Security:090477]Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure. (91)]]

    at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:205)

    at weblogic.security.service.PrincipalAuthenticator.init(PrincipalAuthenticator.java:262)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.doATN(SecurityServiceManagerDelegateImpl.java:581)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealm(SecurityServiceManagerDelegateImpl.java:420)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.loadRealm(SecurityServiceManagerDelegateImpl.java:700)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initializeRealms(SecurityServiceManagerDelegateImpl.java:733)

    at weblogic.security.service.SecurityServiceManagerDelegateImpl.initialize(SecurityServiceManagerDelegateImpl.java:876)

    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:734)

    at weblogic.t3.srvr.T3Srvr.initializeHere(T3Srvr.java:822)

    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:670)

    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:344)

    at weblogic.Server.main(Server.java:32)

    ####Apr 6, 2006 10:42:55 AM CDT Emergency WebLogicServer DXPCHI029398 myserver main WLS Kernel BEA-000342 Unable to initialize the server: weblogic.security.service.SecurityServiceRuntimeException: [Security:090371]Problem instantiating Authentication Provider weblogic.security.providers.authentication.LDAPAtnDelegateException: [Security:090294]could not get connection - with nested exception:

    [java.lang.reflect.InvocationTargetException - with target exception:

    [netscape.ldap.LDAPException: [Security:090477]Certificate chain received from ldapidv.merc.chicago.cme.com - 10.5.19.190 was not trusted causing SSL handshake failure. (91)]]

    ANY HELP on this would be greatly appreciated am totally exhausted seeing these error messages from morning.

    I would like to know if I need a client for connecting to this LDAP authenticator. As am using the Novell API to access the LDAP directory. Let me know, and if so can some one provide me a snippet code.\
    Waiting for response.

    thanks in advance
    kiran

  • RELEVANCY SCORE 2.16

    DB:2.16:2010 - Tf255316 And Cannot Create A Project s7


    I've read several articles related to these issues, however I am still having issues even after following the recommended steps. I have an internalserver in VMware with all applications on that one server. Brand new install of all items, clean
    server before.
    Configuration:
    Windows 2008 R2 (no SP)
    SQL Server 2008 R2
    SharePoint 2010
    TFS 2010
    Server Name:
    TFSAPPV001
    Service Account:
    MYDOMAIN\TFSService (domain account)
    SQL Server Security:
    MYDOMAIN\TFSService (set as public sysadmin) I know probably not recommended, but trying to get it to work
    Reporting Services Security:
    Service Account: MYDOMAIN\TFSService
    Web Service URL: http://tfsappv001:80/ReportServer
    Report Manager URL: http://tfsappv001:80/Reports
    Execution Account: not specified
    Database: SQL Server - TFSAPPV001; Database Name - ReportServer;
    Report Server Mode - Native; Credential - Windows Account;
    Login - MYDOMAIN\TFSService
    SharePoint Security:
    Farm Administrators: MYDOMAIN\TFSService (and others)
    TFS Settings:
    Service Account: MYDOMAIN\TFSService
    Notification URL: http://tfsappv001:8080/tfs
    Server URL: http://localhost:8080/tfs
    Web Access URL: http://tfsappv001:8080/tfs/web
    Machine Name: TFSAPPv001
    Ports: 8080
    Virtual Directory: /tfs
    Data Tier Server: TFSAPPv001
    SQL Server Instance: default(MSSQLSERVER)
    Connection String: Data Source=TFSAPPv001;Initial Catalog=Tfs_Configuration;Integrated Security=True
    Reporting Services Manager URL: http://tfsappv001/Reports
    Reporting Services Server URL: http://tfsappv001/ReportServer
    Reporting Services: TF255316: The name of the service account used for the data sources in SQL Server Reporting Services cannot be loaded from the following server: http://tfsappv001/ReportServer/ReportService2005.asmx.
    Reporting tab all items show green check marks.
    When creating a TFS Project the error appears (edited for brevity):
    Microsoft.VisualStudio.TeamFoundation.ProjectCreationEngine.RunTask(Object taskObj)
    -- Inner Exception --
    Exception Message: The item '/Tfs2010ReportDS' cannot be found. (type ReportingServiceException
    Looking in reporting server http://tfsappv001/Reports, Tfs2010ReportDS does exists and
    MYDOMAIN\TFSService has Content Manager, Team Foundation Content Manager rights to the Data Source.
    MYDOMAIN\TFSService is also setup in the data source for Connect using.
    I can log into the server using MYDOMAIN\TFSService and access all the administration consoles, SQL Server, TFS, SharePoint.
    I am at wits end and I usually can figure these things out. If cannot resolve, then TFS 2010 is not an option for our team, sad.
    MYDOMAIN used is not actual domain name used for security reasons, just for post.

    DB:2.16:2010 - Tf255316 And Cannot Create A Project s7

    Hi EckmanCA,

    What about the progress for this issue?

    If you have any further research or have any other helpful information about this issue, please share it, as this may help us resolve this issue.

    If you have resolved this issue, could you please share your experience here. It will be very beneficial for other community members having the similar questions.John Qiao [MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • RELEVANCY SCORE 2.16

    DB:2.16:Confixx 3.0.9 With Security Patch - Prblems With Dns ax





    Hi,

    i had allready a Domain in Confixx, let us call it: myDomain.de

    If i now insert another one to the same customer called: myDomain-new.de and set the hook at DNS all things going well. Domain apears in the Domainlist at the Cusotmers side....but the DNS Entry for the new Domain myDomain-new.de is only myDomain.de

    So i have to use DNS-Spezial to edit the entry for MyDomain-new.de an after this it works.

    Any Idea what the Problem could be?

    Regards RayMatrix

    DB:2.16:Confixx 3.0.9 With Security Patch - Prblems With Dns ax




    Hi,

    i had allready a Domain in Confixx, let us call it: myDomain.de

    If i now insert another one to the same customer called: myDomain-new.de and set the hook at DNS all things going well. Domain apears in the Domainlist at the Cusotmers side....but the DNS Entry for the new Domain myDomain-new.de is only myDomain.de

    So i have to use DNS-Spezial to edit the entry for MyDomain-new.de an after this it works.

    Any Idea what the Problem could be?

    Regards RayMatrix

  • RELEVANCY SCORE 2.16

    DB:2.16:J2eesdk-1_4_02_2005q2-Windows-Ml 7k


    I am installing j2eesdk1.4.02 on Windows Vista and I have a problem that is the .exe file does not create the default domain. I am trying to create a domain named myDomain but the console show me the following error:

    Invalid byte 2 of 3-byte UTF-8 sequence.
    CLI130 No se pudo crear el dominio, myDomain
    (It could not create the domain, myDomain)

    I will apreciate any help.

    PS:
    I think is a Windows problem

    DB:2.16:J2eesdk-1_4_02_2005q2-Windows-Ml 7k

    Hello,

    Now I have tried it with the latest and final issue, I mean 1.4_03 version and I have the same problem and I do not know what to do.

    Any help?

    Thanks,
    Jose Alvarez de Lara

  • RELEVANCY SCORE 2.16

    DB:2.16:Connection Exception : Refused 37


    import java.io.*;
    import java.util.*;
    import javax.mail.*;
    import javax.mail.internet.*;
    import java.util.*;
    import org.apache.axis.AxisFault;

    public class Sample {

    //mail session state related
    private String m_Username;
    private String m_PostOfficeHost;
    private Session m_MailSession;
    private Store m_Store;
    private Folder m_Inbox;

    public void displayDet() throws Exception {
    String resultString="";
    try {
    m_MailSession = Session.getInstance(System.getProperties(),null);
    //setup store and connect to it
    String proto = "imap";
    m_Store = m_MailSession.getStore(proto);
    m_Username="ramki";
    m_PostOfficeHost="mymail.com";
    m_Store.connect(m_PostOfficeHost,m_Username,"password");
    System.out.println(m_Username+"@"+m_PostOfficeHost+ "SUCCESSFUL LOGIN");
    m_Inbox = m_Store.getFolder("INBOX");
    } catch (Exception e) {
    e.printStackTrace();
    }

    String messageCountString;
    //List messageCountList = new ArrayList();
    StringBuffer sbf = new StringBuffer();
    sbf.append("Total Messages:" + m_Inbox.getMessageCount());
    sbf.append(",");
    sbf.append("New Messages:" + m_Inbox.getNewMessageCount());
    sbf.append(",");
    sbf.append("UnreadMessages:" + m_Inbox.getUnreadMessageCount());
    messageCountString=sbf.toString();

    System.out.println(messageCountString);

    try {
    //close store
    m_Store.close();
    System.out.println(m_Username+"@"+m_PostOfficeHost+ "SUCCESS LOGOUT");
    } catch (Exception ex) {
    ex.printStackTrace();
    }
    }//displayDet

    public static void main(String args[]) throws Exception{
    Sample s=new Sample();
    s.displayDet();
    }// main
    }// Sample

    The error is :

    [root@mydomain webmail]# javac Sample.java
    [root@mydomain webmail]# java Sample
    javax.mail.MessagingException: Connection refused;
    nested exception is:
    java.net.ConnectException: Connection refused
    at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:298)
    at javax.mail.Service.connect(Service.java:234)
    at javax.mail.Service.connect(Service.java:135)
    at Sample.displayDet(Sample.java:26)
    at Sample.main(Sample.java:57)
    Exception in thread "main" java.lang.NullPointerException
    at Sample.displayDet(Sample.java:37)
    at Sample.main(Sample.java:57)[root@igb10033 webmailuserservice]#

    Could any one have an idea as to why we have such an exception?. I have another program with similar lines which is working fine(without being changing the username and password credentials.)

    Appreciate any suggestion

    DB:2.16:Connection Exception : Refused 37

    Bshannon,
    Ya... Its been a good day debugging step by step. I always love learning. And learning Java is passion.

    I was trying to compile program on a stand alone basis (instead of putting it in webapps/webfolder/classes/lib). Now that I have the class file in place its working fine. Thanks for all your patience and ideas.

  • RELEVANCY SCORE 2.16

    DB:2.16:Browser Engine Beadmin - Communicationexception 9k


    We're trying to use the web crawler to crawl a customized SharePoint site due to the amount of javascript running on the page and are recieving an error when running the following command:
    -
    PS C:\FASTSearch\bin
    beadmin.exe -u http://SharePoint_Sub-Site -l verbose
    [2012-12-08 15:29:25.559] Information BrowserEngineAdmin:1 Trying Browser Engine at Crawl_Server_FQDN:13045 (queried name service)
    [2012-12-08 15:29:25.591] Information BrowserEngineAdmin:1 Processing URI: http://SharePoint_Sub-Site
    [2012-12-08 15:29:25.700] Verbose BrowserEngineAdmin:1 Using Browser Engineat net.tcp://Crawl_Server_FQDN:13046/BrowserEngine/net.tcp
    [2012-12-08 15:29:26.622] Error BrowserEngineAdmin:1 CommunicationException: The socket connection was aborted. This could be caused by an error
    processing your message or a receive timeout being exceeded by the remote host, or an undrlying network resource issue. Local socket timeout was '00:09:59.9843757'.
    -
    Crawl_Server_FQDN:13045 is the local machine so there is no firewall blocking the request. Any idea what could be causing the communication issue? Here is the nctrl status output:
    -
    PS C:\FASTSearch\bin nctrl status
    Connecting to Node Controller at localhost:13260..
    Issuing 'status' request to Node Controller..
    Status for node : Crawl_Server
    FAST Search : C:\FASTSE~1
    Disk status : 11% used - 446.33 GB free - 53.66 GB used - 500.00 GB total
    Module Name Process Name
    PID Status
    ------------------------------ -------------------- -------- --------------
    Browser Engine browserengine
    Running
    Content Distributor contentdistributor 7144 Running
    Enterprise Crawler crawler
    1064 Running
    RTS Indexer indexer
    7752 Running
    Indexing Dispatcher indexingdispatcher 3692 Running
    Document Processor procserver_1 6656 Running
    Document Processor procserver_10 8820 Running
    Document Processor procserver_11 7608 Running
    Document Processor procserver_12 4828 Running
    Document Processor procserver_2 4804 Running
    Document Processor procserver_3 7444 Running
    Document Processor procserver_4 7192 Running
    Document Processor procserver_5 8580 Running
    Document Processor procserver_6 5976 Running
    Document Processor procserver_7 4748 Running
    Document Processor procserver_8 892
    Running
    Document Processor procserver_9 2308 Running
    RTS Search search-1
    4972 Running

    DB:2.16:Browser Engine Beadmin - Communicationexception 9k

    This turned out to be an install issue. We ran a scripted install, including prerequisites and two of the prereq's failed to install

    Microsoft Filter Pack 2.0Microsoft Primary Interoperability Assemblies 2005
    Some assembly the web crawler depended on was missing, which caused our issue. Incidentally, these missing prereqs did not stop the FAST Service Applications from crawling SharePoint content, which is why the issue was not caught when the farm was
    built.
    Resolving the issue was a simple case of rerunning the prereq installer and restarting the FAST services.

  • RELEVANCY SCORE 2.15

    DB:2.15:Old Dc Is Still Primary File Replication Service Member j1


    Hi,
    An old DC which was recently demoted running Server 2003 is still listed as the primary member of FRS when I runntfrsutl ds.
    The server that replaced it is running 2008 R2 which seems to be working fine.
    I'm trying to add an RODC to the domain which is going to live in our branch office but after running dcpromo a sysvol and netlogon is never created, in my search to try and fix this issue I ran into this FRS issue. Could this be what is causing my RODC
    issues?
    I found the old server in ASDI edit under CN=FileReplicationService, I didn't want to delete it because its listed as the primary member.
    I ran through the steps in KB article 216498but the old-dc doesnt show up when you runlist
    servers in site
    Any help on fixing the below issue would be appreciated.
    SETTINGS: FILE REPLICATION SERVICE
    DN : cn=file replication service,cn=system,dc=sub,dc=MyDomain,dc=com
    Guid : a02a87d5-c64c-4515-aedf5fd47fc211b5
    WhenCreated : 9/19/2007 13:34:32 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/13/2013 15:23:50 GMT Standard Time GMT Daylight Time [0]
    SET: DOMAIN SYSTEM VOLUME (SYSVOL SHARE)
    DN : cn=domain system volume (sysvol share),cn=file replication service,cn=system,dc=sub,dc=MyDomain,dc=com
    Guid : 7ee172a2-5881-4047-b02dd3d58e241c3d
    Type : 2
    Primary Member: CN= OLD-DC-2003,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=sub,DC=MyDomain,DC=com
    File Filter : *.tmp, *.bak, ~*
    Dir Filter : (null)
    FRS Flags : (null)
    WhenCreated : 9/19/2007 13:41:33 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/13/2013 15:25:0 GMT Standard Time GMT Daylight Time [0]
    MEMBER: RODC-BRANCH-DC
    DN : cn=RODC-BRANCH-DC,cn=domain system volume (sysvol share),cn=file replication service,cn=system,dc=sub,dc=MyDomain,dc=com
    Guid : 54d7b52d-e302-473e-b1d198ed7aec507e
    Server Ref : CN=NTDS Settings,CN=RODC-BRANCH-DC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=sub,DC=MyDomain,DC=com
    Computer Ref : cn=RODC-BRANCH-DC,ou=domain controllers,dc=sub,dc=MyDomain,dc=com
    Cracked Domain : sub.MyDomain.com
    Cracked Name : 00000002 SUB\RODC-BRANCH-DC$
    Cracked Domain : sub.MyDomain.com
    Cracked Name : fffffff4 S-1-5-21-1292428093-1715567821-725345543-2119
    Computer's DNS : RODC-BRANCH-DC.sub.MyDomain.com
    WhenCreated : 8/28/2013 16:46:2 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/28/2013 16:46:2 GMT Standard Time GMT Daylight Time [0]
    CXTION: RODC CONNECTION (FRS)
    DN : cn=rodc connection (frs),cn=ntds settings,cn=RODC-BRANCH-DC,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=sub,dc=MyDomain,dc=com
    Guid : c7425dd2-24c9-414f-944b90e021adc8fc
    Partner Dn : cn=ntds settings,cn=NEW-DC-2008,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=sub,dc=MyDomain,dc=com
    Partner Rdn : NTDS SETTINGS
    Enabled : TRUE
    WhenCreated : 8/28/2013 16:46:2 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/28/2013 16:54:55 GMT Standard Time GMT Daylight Time [0]
    Options : 0x00000041 [AutoGenCxtion 0x00000040 ]
    Schedule
    Day 1: 111111111111111111111111
    Day 2: 111111111111111111111111
    Day 3: 111111111111111111111111
    Day 4: 111111111111111111111111
    Day 5: 111111111111111111111111
    Day 6: 111111111111111111111111
    Day 7: 111111111111111111111111
    MEMBER: NEW-DC-2008
    DN : cn=New-DC-2008,cn=domain system volume (sysvol share),cn=file replication service,cn=system,dc=sub,dc=MyDomain,dc=com
    Guid : 842f495a-da47-4d68-97c32022b7b75c4c
    Server Ref : CN=NTDS Settings,CN=NEW-DC-2008,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=sub,DC=MyDomain,DC=com
    Computer Ref : cn=New-DC-2008,ou=domain controllers,dc=sub,dc=MyDomain,dc=com
    Cracked Domain : sub.MyDomain.com
    Cracked Name : 00000002 SUB\NEW-DC-2008$
    Cracked Domain : sub.MyDomain.com
    Cracked Name : fffffff4 S-1-5-21-1292428093-1715567821-725345543-1639
    Computer's DNS : NEW-DC-2008.sub.MyDomain.com
    WhenCreated : 8/13/2013 15:37:23 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/13/2013 15:37:23 GMT Standard Time GMT Daylight Time [0]
    CXTION: 733652D3-0393-4030-933F-6503AA104CA1
    DN : cn=733652d3-0393-4030-933f-6503aa104ca1,cn=ntds settings,cn=New-DC-2008,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=sub,dc=MyDomain,dc=com
    Guid : e30d8701-4ec5-4197-ac4e9b8dcbcd4408
    Partner Dn : cn=ntds settings,cn=SECONDARY-DC-2003,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=sub,dc=MyDomain,dc=com
    Partner Rdn : NTDS SETTINGS
    Enabled : TRUE
    WhenCreated : 8/13/2013 15:42:10 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/27/2013 10:53:8 GMT Standard Time GMT Daylight Time [0]
    Options : 0x00000001 [AutoGenCxtion ]
    Schedule
    Day 1: 111111111111111111111111
    Day 2: 111111111111111111111111
    Day 3: 111111111111111111111111
    Day 4: 111111111111111111111111
    Day 5: 111111111111111111111111
    Day 6: 111111111111111111111111
    Day 7: 111111111111111111111111
    MEMBER: OLD-DC-2003
    DN : cn=OLD-DC-2003,cn=domain system volume (sysvol share),cn=file replication service,cn=system,dc=sub,dc=MyDomain,dc=com
    Guid : f7fa620a-b514-4f56-afa3ec9a06d69fe7
    Server Ref : (null)
    Computer Ref : (null)
    WhenCreated : 9/19/2007 13:41:33 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/13/2013 15:25:0 GMT Standard Time GMT Daylight Time [0]
    WARN - OLD-DC-2003 lacks a settings reference
    MEMBER: SECONDARY-DC-2003
    DN : cn=Secondary-DC-2003,cn=domain system volume (sysvol share),cn=file replication service,cn=system,dc=sub,dc=MyDomain,dc=com
    Guid : b8b5ef68-7c8b-47ff-b880a30fe6167703
    Server Ref : CN=NTDS Settings,CN=SECONDARY-DC-2003,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=sub,DC=MyDomain,DC=com
    Computer Ref : cn=Secondary-DC-2003,ou=domain controllers,dc=sub,dc=MyDomain,dc=com
    Cracked Domain : sub.MyDomain.com
    Cracked Name : 00000002 SUB\SECONDARY-DC-2003$
    Cracked Domain : sub.MyDomain.com
    Cracked Name : fffffff4 S-1-5-21-1292428093-1715567821-725345543-1621
    Computer's DNS : SECONDARY-DC-2003.sub.MyDomain.com
    WhenCreated : 3/21/2011 14:36:49 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/13/2013 15:25:1 GMT Standard Time GMT Daylight Time [0]
    CXTION: F4197068-1754-49E3-8DBE-FF6E85A520E2
    DN : cn=f4197068-1754-49e3-8dbe-ff6e85a520e2,cn=ntds settings,cn=Secondary-DC-2003,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=sub,dc=MyDomain,dc=com
    Guid : c0ea21fa-1f01-41b7-80bf8ead91cfed38
    Partner Dn : cn=ntds settings,cn=New-DC-2008,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=sub,dc=MyDomain,dc=com
    Partner Rdn : NTDS SETTINGS
    Enabled : TRUE
    WhenCreated : 8/13/2013 15:27:16 GMT Standard Time GMT Daylight Time [0]
    WhenChanged : 8/27/2013 10:4:14 GMT Standard Time GMT Daylight Time [0]
    Options : 0x00000001 [AutoGenCxtion ]
    Schedule
    Day 1: 111111111111111111111111
    Day 2: 111111111111111111111111
    Day 3: 111111111111111111111111
    Day 4: 111111111111111111111111
    Day 5: 111111111111111111111111
    Day 6: 111111111111111111111111
    Day 7: 111111111111111111111111

    DB:2.15:Old Dc Is Still Primary File Replication Service Member j1


    I've totally started from scratch for the new RODC, got a better feel for what I'm doing now. I'll start a new thread if I run into more issues.

    Thanks for the help.

  • RELEVANCY SCORE 2.15

    DB:2.15:About Connection Pool(Weblogic7.0) ja


    I just create a domain(MyDomain) then start server. After enter http://localhost:7001/console, a ClassNotFoundException is thrown when i select services/jdbc/connection pool.
    anyone can tell me why it happen. i just enter the config page and no other operation has been made.

    DB:2.15:About Connection Pool(Weblogic7.0) ja

    qqdouble wrote:

    I just create a domain(MyDomain) then start server. After enter http://localhost:7001/console, a ClassNotFoundException is thrown when i select services/jdbc/connection pool.
    anyone can tell me why it happen. i just enter the config page and no other operation has been made.Would you show us what the exact ClassNotFoundException was?

  • RELEVANCY SCORE 2.15

    DB:2.15:Refused Connection - Sybase ps


    Could someone please help with this not sure what is happing. I had this
    working at one stage but not sure what has happened.

    I have reinstalled Sybase and WL 7, (clean installs).

    Trying to connect to Sybase 11 DBMS using WLS 7.
    I've set my connection pool as follows:
    ----------------------------------------------------------------------------
    -
    Name : SybasePool
    URL : jdbc:sybase:Tds:localhost:5000/Aims
    Driver Class:com.sybase.jdbc2.jdbc.SybDriver (Assume this uses WL drivers as
    I'm not installing 3rd party drivers)
    Properties : user=sa
    ----------------------------------------------------------------------------
    -

    Sybase sql.ini file is :
    ----------------------------------------------------------------------------
    -
    [pisces]
    query=NLWNSCK,pisces,5000
    master=NLWNSCK,pisces,5000

    [pisces_BS]
    $BASE$00=NLWNSCK,pisces,5001
    $BASE$01=NLMSNMP,\pipe\sybase\backup
    query=$BASE$00;$BASE$01;
    $BASE$02=NLWNSCK,pisces,5001
    $BASE$03=NLMSNMP,\pipe\sybase\backup
    master=$BASE$02;$BASE$03;

    [pisces_MS]
    $BASE$00=NLWNSCK,pisces,5002
    $BASE$01=NLMSNMP,\pipe\sybase\monitor
    query=$BASE$00;$BASE$01;
    $BASE$02=NLWNSCK,pisces,5002
    $BASE$03=NLMSNMP,\pipe\sybase\monitor
    master=$BASE$02;$BASE$03;
    ----------------------------------------------------------------------------
    -
    Results of Server start up :

    C:\bea\user_projects\mydomain"C:\bea\jdk131_06\bin\java" -hotspot -Xms32m -
    Xmx200m -Dweblogic.security.SSL.trustedCAKey
    Store=C:\bea\weblogic700\server\lib\cacerts -Dweblogic.Name=myserver -Dbea.h
    ome="C:\bea" -Dweblogic.management.username=
    -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled= -Djava.se
    curity.policy="C:\bea\weblogic700\server\lib
    \weblogic.policy" weblogic.Server
    22/06/2004 22:19:28 Info Security 090065 Getting boot identity from
    user.
    Enter username to boot WebLogic server:system
    Enter password to boot WebLogic server:
    Starting WebLogic Server...
    22/06/2004 22:19:40 Notice Management 140005 Loading configuration
    C:\bea\user_projects\mydomain\.\config.xml

    22/06/2004 22:19:52 Notice Security 090082 Security initializing
    using realm myrealm.
    22/06/2004 22:19:54 Notice WebLogicServer 000327 Starting WebLogic
    Admin Server "myserver" for domain "mydomain
    "
    22/06/2004 22:20:13 Notice Management 141052 Application Poller
    started for development server.
    22/06/2004 22:20:18 Notice WebLogicServer 000354 Thread
    "ListenThread.Default" listening on port 7001
    22/06/2004 22:20:18 Notice Management 141030 Starting discovery of
    Managed Server... This feature is on by defa
    ult, you may turn this off by passing -Dweblogic.management.discover=false
    22/06/2004 22:20:18 Notice WebLogicServer 000331 Started WebLogic
    Admin Server "myserver" for domain "mydomain"
    running in Development Mode
    22/06/2004 22:20:18 Notice WebLogicServer 000354 Thread
    "SSLListenThread.Default" listening on port 7002
    22/06/2004 22:20:18 Notice WebLogicServer 000365 Server state
    changed to RUNNING
    22/06/2004 22:20:18 Notice WebLogicServer 000360 Server started in
    RUNNING mode
    22/06/2004 22:27:43 Error JDBC 001060 Cannot startup connection
    pool "SybasePool" weblogic.common.ResourceExcep
    tion: weblogic.common.ResourceException:
    Could not create pool connection. The DBMS driver exception was:
    java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException:
    Connection refused: connect
    at
    com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:493)
    at
    com.sybase.jdbc2.jdbc.ErrorMessage.raiseErrorCheckDead(ErrorMessage.java:729
    )
    at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:3107)
    at com.sybase.jdbc2.tds.Tds.login(Tds.java:394)
    at
    com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java:218)
    at
    com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:195)
    at
    com.sybase.jdbc2.jdbc.SybConnection.init(SybConnection.java:174)

    DB:2.15:Refused Connection - Sybase ps


    Thanks, Joe,
    I solved this by replacing the "localhost" (in the pool definition) with its eqivalent
    "pisces" and it worked. I have used this before (I'm sure) and it has worked but
    this time I am not sure why it requires me to have the explicit name and not localhost.

    If anyone can enlighten me that would be good. However, it has been solved!

    Regards
    Glenn

    Joe Weinstein joeNOSPAM@bea.com wrote:

    Glenn wrote:

    Could someone please help with this not sure what is happing. I hadthis
    working at one stage but not sure what has happened.

    I have reinstalled Sybase and WL 7, (clean installs).

    Trying to connect to Sybase 11 DBMS using WLS 7.
    I've set my connection pool as follows:
    ----------------------------------------------------------------------------
    -
    Name : SybasePool
    URL : jdbc:sybase:Tds:localhost:5000/Aims
    Driver Class:com.sybase.jdbc2.jdbc.SybDriver (Assume this uses WL driversas
    I'm not installing 3rd party drivers)Hi. No, it uses Sybase's driver, one we ship with the product. I assume
    the machine
    you're running weblogic on is named 'pisces', correct? It appears that
    the DBMS is
    refusing to give the driver a connection. I suspect your 'sa' password
    is incorrect.
    Joe

    Properties : user=sa
    ----------------------------------------------------------------------------
    -

    Sybase sql.ini file is :
    ----------------------------------------------------------------------------
    -
    [pisces]
    query=NLWNSCK,pisces,5000
    master=NLWNSCK,pisces,5000

    [pisces_BS]
    $BASE$00=NLWNSCK,pisces,5001
    $BASE$01=NLMSNMP,\pipe\sybase\backup
    query=$BASE$00;$BASE$01;
    $BASE$02=NLWNSCK,pisces,5001
    $BASE$03=NLMSNMP,\pipe\sybase\backup
    master=$BASE$02;$BASE$03;

    [pisces_MS]
    $BASE$00=NLWNSCK,pisces,5002
    $BASE$01=NLMSNMP,\pipe\sybase\monitor
    query=$BASE$00;$BASE$01;
    $BASE$02=NLWNSCK,pisces,5002
    $BASE$03=NLMSNMP,\pipe\sybase\monitor
    master=$BASE$02;$BASE$03;
    ----------------------------------------------------------------------------
    -
    Results of Server start up :

    C:\bea\user_projects\mydomain"C:\bea\jdk131_06\bin\java" -hotspot-Xms32m -
    Xmx200m -Dweblogic.security.SSL.trustedCAKey
    Store=C:\bea\weblogic700\server\lib\cacerts -Dweblogic.Name=myserver-Dbea.h
    ome="C:\bea" -Dweblogic.management.username=
    -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled=-Djava.se
    curity.policy="C:\bea\weblogic700\server\lib
    \weblogic.policy" weblogic.Server
    22/06/2004 22:19:28 Info Security 090065 Getting boot identityfrom
    user.
    Enter username to boot WebLogic server:system
    Enter password to boot WebLogic server:
    Starting WebLogic Server...
    22/06/2004 22:19:40 Notice Management 140005 Loading configuration
    C:\bea\user_projects\mydomain\.\config.xml

    22/06/2004 22:19:52 Notice Security 090082 Security initializing
    using realm myrealm.
    22/06/2004 22:19:54 Notice WebLogicServer 000327 StartingWebLogic
    Admin Server "myserver" for domain "mydomain
    "
    22/06/2004 22:20:13 Notice Management 141052 Application Poller
    started for development server.
    22/06/2004 22:20:18 Notice WebLogicServer 000354 Thread
    "ListenThread.Default" listening on port 7001
    22/06/2004 22:20:18 Notice Management 141030 Starting discoveryof
    Managed Server... This feature is on by defa
    ult, you may turn this off by passing -Dweblogic.management.discover=false
    22/06/2004 22:20:18 Notice WebLogicServer 000331 Started WebLogic
    Admin Server "myserver" for domain "mydomain"
    running in Development Mode
    22/06/2004 22:20:18 Notice WebLogicServer 000354 Thread
    "SSLListenThread.Default" listening on port 7002
    22/06/2004 22:20:18 Notice WebLogicServer 000365 Server state
    changed to RUNNING
    22/06/2004 22:20:18 Notice WebLogicServer 000360 Server startedin
    RUNNING mode
    22/06/2004 22:27:43 Error JDBC 001060 Cannot startup connection
    pool "SybasePool" weblogic.common.ResourceExcep
    tion: weblogic.common.ResourceException:
    Could not create pool connection. The DBMS driver exception was:
    java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException:
    Connection refused: connect
    at
    com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:493)
    at
    com.sybase.jdbc2.jdbc.ErrorMessage.raiseErrorCheckDead(ErrorMessage.java:729
    )
    at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:3107)
    at com.sybase.jdbc2.tds.Tds.login(Tds.java:394)
    at
    com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java:218)
    at
    com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:195)
    at
    com.sybase.jdbc2.jdbc.SybConnection.init(SybConnection.java:174)

  • RELEVANCY SCORE 2.15

    DB:2.15:Weblogic And Mysql ≪2≫ c1



    I messed around with CLASSPATH and finally could get "mydomain" work
    with MySQL. But when I create a new domain "ejbbook", it does not
    work. It yells: "unable to load Driver: org.gjt.mm.mysql.Driver"

    CLASSPATH is same in both WL_HOME/config/mydomain/startWeblogic.sh
    and WL_HOME/config/ejbbook/startWeblogic.sh.

    Any ideas?

    I am using Weblogic 6.1, on Mandarke Linux 8.1, and MySQL 3.23.41.

    Thanks
    Sreedhar

    DB:2.15:Weblogic And Mysql ≪2≫ c1


    I messed around with CLASSPATH and finally could get "mydomain" work
    with MySQL. But when I create a new domain "ejbbook", it does not
    work. It yells: "unable to load Driver: org.gjt.mm.mysql.Driver"

    CLASSPATH is same in both WL_HOME/config/mydomain/startWeblogic.sh
    and WL_HOME/config/ejbbook/startWeblogic.sh.

    Any ideas?

    I am using Weblogic 6.1, on Mandarke Linux 8.1, and MySQL 3.23.41.

    Thanks
    Sreedhar

  • RELEVANCY SCORE 2.15

    DB:2.15:Could Not Connect To Config Server f9


    Hi,
    I've installed ESP 5.3 with SP3 slipstreamed as a single-node on a Windows Server 2008 R2 64-bit virtual guest. The installation worked as excepted, but when I go to the ESP Admin GUI, I get the error below:
    Could not connect to Config Server at host ... port 16005
    All services are running according to nctrl status, the forward and reverse nslookup are also working. This is the configserver.log:
    [2011-06-08 12:22:42.201] VERBOSE systemmsg Starting Config Server on port 16005 (PID: 2068)
    [2011-06-08 12:22:42.232] INFO systemmsg Found more recent tmp config file: c:\esp\etc\CSConfig.xml.swp
    [2011-06-08 12:22:42.232] INFO systemmsg Found more recent tmp config file: c:\esp\etc\PipelineConfig.xml.swp
    [2011-06-08 12:22:42.342] INFO systemmsg Found more recent tmp config file: c:\esp\etc\CSUniCfg.xml.swp
    [2011-06-08 12:22:42.373] INFO systemmsg Started Config Server on port 16005 (PID: 2068)
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:14196 raised exception - socket.error: [Errno 10061] Connection refused.
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:16700 raised exception - socket.error: [Errno 10061] Connection refused.
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:16200 raised exception - socket.error: [Errno 10061] Connection refused.
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:16065 raised exception - socket.error: [Errno 10061] Connection refused.
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:16710 raised exception - socket.error: [Errno 10061] Connection refused.
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:16098 raised exception - socket.error: [Errno 10061] Connection refused.
    [2011-06-08 12:22:43.264] WARNING systemmsg ReRegister() to module at myserver.mycompany.com:14000 raised exception - socket.error: [Errno 10061] Connection refused.
    old errno: 3
    new errno: 2
    old errno: 3
    new errno: 2
    old errno: 3
    new errno: 2
    ..
    ..
    old errno: 3
    new errno: 2
    old errno: 3
    new errno: 2
    old errno: 3
    new errno: 2
    old errno: 3
    new errno: 2
    [2011-06-08 12:23:42.043] VERBOSE systemmsg Inactive CORBA module 'ContentDistributor' at n/a responded to our pings, reregistering
    [2011-06-08 12:23:42.045] VERBOSE systemmsg CORBA Module (ContentDistributor) has changed from 'n/a:0' to 'myserver.mycompany.com:16100'
    [2011-06-08 12:23:42.410] VERBOSE systemmsg Inactive CORBA module 'ResourceService' at n/a responded to our pings, reregistering
    [2011-06-08 12:23:42.429] VERBOSE systemmsg CORBA Module (ResourceService) has changed from 'n/a:0' to 'myserver:16095'
    [2011-06-08 12:23:42.773] VERBOSE systemmsg Inactive CORBA module 'DeploymentManager' at n/a responded to our pings, reregistering
    [2011-06-08 12:23:42.786] VERBOSE systemmsg CORBA Module (DeploymentManager) has changed from 'n/a:0' to 'myserver:16093'
    [2011-06-08 12:23:42.918] VERBOSE systemmsg Inactive CORBA module 'IndexingDispatcher (webcluster)' at n/a responded to our pings, reregistering
    [2011-06-08 12:23:42.920] VERBOSE systemmsg CORBA Module (IndexingDispatcher (webcluster)) has changed from 'n/a:0' to 'myserver.mycompany.com:0'
    [2011-06-08 12:24:43.062] WARNING systemmsg Module (WebAnalyzer) at myserver.mycompany.com:16700 is not responding
    [2011-06-08 12:24:43.062] VERBOSE systemmsg The ping call resulted in the following exception: Timeout
    [2011-06-08 12:24:43.062] VERBOSE systemmsg Module (WebAnalyzer) at myserver.mycompany.com:16700 not responding, marking as inactive
    [2011-06-08 12:24:53.446] VERBOSE systemmsg Inactive module at myserver.mycompany.com:16700 responded to our pings, requesting registration
    Any tips?

    Brgds Jonas

    DB:2.15:Could Not Connect To Config Server f9

    Hi Patrick,
    I have disabled IPv6 in my FAST Search for SharePoint 2010 installation, and still can see the same messages:

    From ConfigFile:
    [2012-02-08 10:42:31.283] WARNING systemmsg ConfigurationChanged(ProcessorServer, ('tpatgicfst02.takedapharm.tpna.com', 13398)) to module at tpatgicfst02.takedapharm.tpna.com:13398 timed out, putting message to the inactive queue since
    5 requeues failed
    [2012-02-08 10:42:33.221] WARNING systemmsg ConfigurationChanged(ProcessorServer, ('tpatgicfst02.takedapharm.tpna.com', 13395)) to module at tpatgicfst02.takedapharm.tpna.com:13395 timed out, putting message to the inactive queue since 5 requeues
    failed
    [2012-02-08 10:42:41.814] WARNING systemmsg ConfigurationChanged(ProcessorServer, ('tpatgicfst02.takedapharm.tpna.com', 13396)) to module at tpatgicfst02.takedapharm.tpna.com:13396 timed out, putting message to the inactive queue since 5 requeues
    failed
    [2012-02-08 10:42:44.142] WARNING systemmsg ConfigurationChanged(ProcessorServer, ('tpatgicfst02.takedapharm.tpna.com', 13398)) to module at tpatgicfst02.takedapharm.tpna.com:13398 timed out, requeueing into the inactive queue
    [2012-02-08 10:42:46.314] WARNING systemmsg ConfigurationChanged(ProcessorServer, ('tpatgicfst02.takedapharm.tpna.com', 13397)) to module at tpatgicfst02.takedapharm.tpna.com:13397 timed out, requeueing into the inactive queue
    [2012-02-08 10:42:49.142] WARNING systemmsg Module (ProcessorServer) at tpatgicfst03.takedapharm.tpna.com:13397 is not responding
    [2012-02-08 10:42:49.142] VERBOSE systemmsg The ping call resulted in the following exception: socket.error: [Errno 10060] The operation timed out.
    [2012-02-08 10:42:49.142] VERBOSE systemmsg Module (ProcessorServer) at tpatgicfst03.takedapharm.tpna.com:13397 not responding, marking as inactive
    [2012-02-08 10:42:49.142] WARNING systemmsg Module (ProcessorServer) at tpatgicfst03.takedapharm.tpna.com:13398 is not responding
    [2012-02-08 10:42:49.142] VERBOSE systemmsg The ping call resulted in the following exception: socket.error: [Errno 10060] The operation timed out.
    [2012-02-08 10:42:49.142] VERBOSE systemmsg Module (ProcessorServer) at tpatgicfst03.takedapharm.tpna.com:13398 not responding, marking as inactive
    [2012-02-08 10:42:49.142] WARNING systemmsg Module (ProcessorServer) at tpatgicfst03.takedapharm.tpna.com:13396 is not responding
    I am not sure if this issue is causing indexing latency getting worse and worse. I am getting 2 docs every five minutes, really small xml files.
    Any other suggestions?
    Thanks

  • RELEVANCY SCORE 2.15

    DB:2.15:Sccm 2012 Sp1 Cross-Forest, Cannot Contact Ldap Server mj


    I'm trying implement a second forest onto my Primary Site, but i can't connect to the LDAP server of the second forest. I'm using an account that is domain admin on the second forest.
    The ADforestDisc.log tells me:
    ERROR: [ForestDiscoveryAgent]: Failed to connect to forest mydomain.local. This can be because of disjoint DNS namespaces, network connectivity or server availibility issue. Error Information The specified forest does not exist or cannot be contacted.~~ $$SMS_AD_FOREST_DISCOVERY_MANAGER05-06-2013
    11:17:01.556-120thread=3264 (0xCC0)

    and the adsysdis.log:
    INFO: -------- Starting to process search scope (LDAP://DC=mydomain,DC=mydomain,DC=local) -------- $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:01.767-120thread=3644 (0xE3C)
    INFO: Processing search path: 'LDAP://DC=mydomain,DC=mydomain,DC=LOCAL'.~ $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:01.767-120thread=3644 (0xE3C)
    INFO: Impersonating user [mydomain\me] to discover objects. $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:01.817-120thread=3644 (0xE3C)
    INFO: Incremental synchronization requested~ $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:01.820-120thread=3644 (0xE3C)
    INFO: CADSource::incrementalSync returning 0x00000001~ $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:01.825-120thread=3644 (0xE3C)
    ERROR: Failed to bind to 'LDAP://DC=mydomain,DC=mydomain,DC=LOCAL' (0x8007054B)~ $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:04.077-120thread=3644 (0xE3C)
    INFO: CADSource::fullSync returning 0x8007054B~ $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:04.077-120thread=3644 (0xE3C)
    INFO: Reverting from impersonated user to default user. $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:04.077-120thread=3644 (0xE3C)
    ERROR: Failed to enumerate directory objects in AD container LDAP://DC=mydomain,DC=mydomain,DC=LOCAL $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:04.078-120thread=3644 (0xE3C)
    STATMSG: ID=5204 SEV=E LEV=M SOURCE=SMS Server COMP=SMS_AD_SYSTEM_DISCOVERY_AGENT SYS=ws12-myserver.mydomain.local SITE=CM1 PID=1760 TID=3644 GMTDATE=Mon May 06 09:20:04.078 2013 ISTR0=LDAP://DC=mydomain,DC=mydomain,DC=LOCAL
    ISTR1=The specified domain either does not exist or could not be contacted.~~ ISTR2= ISTR3= ISTR4= ISTR5= ISTR6= ISTR7= ISTR8= ISTR9= NUMATTRS=0 $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013
    11:20:04.078-120thread=3644 (0xE3C)
    INFO: -------- Finished to process search scope (LDAP://DC=mydomain,DC=mydomain,DC=local) -------- $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:04.079-120thread=3644 (0xE3C)
    STATMSG: ID=5202 SEV=I LEV=M SOURCE=SMS Server COMP=SMS_AD_SYSTEM_DISCOVERY_AGENT SYS=ws12-myserv.mydomain.local SITE=CM1 PID=1760 TID=3644 GMTDATE=Mon May 06 09:20:04.079 2013 ISTR0=2 ISTR1=0 ISTR2=0
    ISTR3=0 ISTR4= ISTR5= ISTR6= ISTR7= ISTR8= ISTR9= NUMATTRS=0 $$SMS_AD_SYSTEM_DISCOVERY_AGENT05-06-2013 11:20:04.079-120thread=3644 (0xE3C)

    The second forest is on a different Vlan but all appropriate ports are open.
    Does anyone have an idea what could be wrong?

    DB:2.15:Sccm 2012 Sp1 Cross-Forest, Cannot Contact Ldap Server mj

    The site server performing the forest discovery must be able to resolve the SRV records for the DCs or root domain of the other forest.Jason | http://blog.configmgrftw.com

  • RELEVANCY SCORE 2.15

    DB:2.15:Problem In Configuring Ms Win2003 Ad As A Directory Service af


    I am trying to configure MS Windows Server 2003 Active Directory as a Directory Service for Sun ONE Web Server 6.1

    I have made the following configuration at the Global Settings Page of the Administration Server :

    Directory Service ID : default
    Host Name : myhost.mydomain.mycountry
    Port : 389
    Use Secure
    Sockets Layer (SSL)
    for connections? : No
    Base DN : DC=mydomain,DC=mycountry
    Bind DN : CN=myuser,CN=Users,DC=mydomain,DC=mycountry
    Bind Password : mypassword

    Whatever I am trying to do at the Users and Groups Page of the Administration Server I am getting the following message :

    An error occurred while contacting the LDAP server.
    (Can't connect to the LDAP server)
    A connection to the directory server could not be opened. Contact your directory server administrator for assistance.

    The user myuser is member of the Administrators Group.

    I log on to the Sun ONE Web Server 6.1 as myuser.

    I know that Base DN and Bind DN are correct because I use them with Microsoft's LDP Tool. I don't know if the user lacks any privilege (although he is a member of the Administrators) or if I have to configure something else from the Administration Server.

    Any help on this problem would be appreciated very much.

    Thanks in advance

    DB:2.15:Problem In Configuring Ms Win2003 Ad As A Directory Service af

    Hi
    Are you able to use ACL (ACE's) in iPlanet after integrating ADS?. userId field is empty. How are you actually using this iPlanet integration with ADS in your application/in your company.?

    Thanks!
    GV
    velmurugan_sarva@yahoo.com

  • RELEVANCY SCORE 2.15

    DB:2.15:Mod_Proxy: Reverse Proxy In Plesk-Controlled Apache Server Returns Http 500 xp





    Hi,

    Im trying to configure reverse proxy rules in vhost.conf. I have Apache-2.2.8 on Ubuntu-8.04 (monitored by Plesk-10.4.4). Im encountering a HTTP 500 error, which I dont see with exactly the same configuration on my local system. Could there be any Plesk-specific issues involved that need to be addressed to allow for reverse proxying?

    What Im trying to achieve is defining a reverse proxy rule that defers all traffic to -say- http://mydomain/tomcat/ to the Tomcat server running on port 8080. I have mod_rewrite and mod_proxy loaded in Apache. As far as I understand mod_proxy docs, entering following rules in /var/www/vhosts/mydomain/conf/vhost.conf should work:

    Proxy *
    Order deny,allow
    Allow from all
    /Proxy

    RewriteEngine on
    ProxyRequests off
    RewriteRule ^/tomcat/(.*)$ http://mydomain:8080/$1 [P]

    (Note: I tested with a RewriteRule directive to get at least some logging.) Yet, I am getting a HTTP 500: internal server error when requesting above URL.

    I have made mod_rewrite log extensively, and find following entries in the logs:

    81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) init rewrite engine with requested uri /tomcat/testApp/
    81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (3) applying pattern ^/tomcat/(.*)$ to uri /tomcat/testApp/
    81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) rewrite /tomcat/testApp/ - http://mydomain:8080/testApp/
    81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) forcing proxy-throughput with http://mydomain:8080/testApp/
    81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (1) go-ahead with proxy request proxy:http://mydomain:8080/testApp/ [OK]

    This suggests that the rewrite and proxy part are processed ok; still the proxied request produces a 500 error. Addressing the testApp directly via http://mydomain:8080/testApp does work, and the same setup does work on my local computer. Also, defining a proxy rule to another domain gives the same result, e.g:
    ProxyPass /google/ http://www.google.be/
    ProxyPassReverse /google/ http://www.google.be/
    Gives the same HTTP 500 error for requests for http://mydomain/google/.

    Does anyone have an idea what might be wrong, or how I at least can get more useful information than internal server error (apart from above rewrite logs, I cant find any trace of this request in any other logs, which is quite maddening).

    Im rather desperate, any pointers much appreciated!

    Ron

    DB:2.15:Mod_Proxy: Reverse Proxy In Plesk-Controlled Apache Server Returns Http 500 xp




    FWI, it appeared that I had overlooked to enable mod_proxy_http in Plesks Apache server. Hence, the issue could be fixed by enabling mod_proxy_http (alongside mod_proxy).

    Ron

  • RELEVANCY SCORE 2.15

    DB:2.15:Deleted Default Fast Search Certificate... a7


    In an attempt to get my development FAST Search environment back up and running after the FAST Search certificate expired, I deleted the default FAST Search certificate that was created when FAST Search was initially installed. I ran the .\ReplaceDefaultCertificate.ps1...
    then moved it to the front end SharePoint server and ran the .\SecureFASTSearchConnector.ps1 -certPath... command and it comes up with the dreaded error every
    time connection to contentdistributor blah blah blah...could not be validated. I have checked to make sure I'm using the same account as the Search Service and that it set as the same in the content distributor settings. Is there another command
    I need to run instead of a .\Replace since it is not there to be replaced in the first place after deleting it? Thanks

    DB:2.15:Deleted Default Fast Search Certificate... a7

    Reinstalling FAST Search along with the timer fix mentioned above resulted in no joy. Still looking into this if anyone has any suggestions.

  • RELEVANCY SCORE 2.15

    DB:2.15:Claimsets Best Practice 1f


    Hey,I've working on a project in which I need to create a STS and a few relying parties based on the geneva framework. In one of the relying parties the STS needs to issue a token which contains some kind of role information about the user. These are the 2 solutions I have in mind:
    1. Create a claim like : http://mydomain/role . Make sure the relying parties request this claim and then let the STS return a claimset that contains one or multiple times this claim, this could be the cliamset of a person who is a manager but also a Administrator and a Trainer:claim: http://mydomain/role value: Managerclaim: http://mydomain/role value: Administratorclaim: http://mydomain/role value: TrainerIs this scenario supported? If a relying party requests a claim can we issue this in one token multiple times? Can a claimset contain multiple times the same claim.2. If the above scenario is not valid. I could create individual claims for every role: http://mydomain/Manager, http://mydomain/Administrator and http://mydomain/Trainer each of them with a value of true or false maybe.What is the best practice?grt,Lieven

    DB:2.15:Claimsets Best Practice 1f

    Thanks for the advice. In my scenario the best solution is creating my own role claim, I think. Thanks.Lieven

  • RELEVANCY SCORE 2.15

    DB:2.15:Ignore Lettercase When Sorting In View Administrator? 39



    Just a quick question:

    When sorting a list in View Administrator, Capital Letters are sorted before lower case letters; for example, if I sort the desktops by their assigned user, user "mydomain\Example3" is sorted higher than "mydomain\example1", because of that capital E.

    so a list could look like this:

    mydomain\Example3

    mydomain\TEST

    mydomain\example1

    mydomain\example2

    mydomain\hallo1234

    Is there a way to turn that off, and get a strictly alphabetical list instead?

  • RELEVANCY SCORE 2.15

    DB:2.15:How Could I Use Ldifde To Trusted Domain ? s3


    We have trusted domain and I would like to query by ldifde.( I can see that domain by ADUC)
    I tried
    ldifde -b mydomain\myaccount targetdomainFQDN password -f test.txt
    ldifde -b mydomain\myaccount targetdomainNetBiosDomainname password -f test.txt
    ldifde -b myaccount targetdomainFQDN password-f test.txt
    but, failed.

    DB:2.15:How Could I Use Ldifde To Trusted Domain ? s3

    Try using -d parameter - which allows you to designate distinguished name of the search base along with the -s parameter that designates a target DC
    ldifde - d dc=targetdomain,dc=com-s dc1.targetdomain.com
    -f test.csv
    hth
    Marcin