-
RELEVANCY SCORE 4.60
DB:4.60:After Virtual Center Upgrade To 2.5 A Couple Hosts Say "Failed To Install Virtual Center Agent Service" 99
These hosts are 3.0.1.
Any ideas?
DB:4.60:After Virtual Center Upgrade To 2.5 A Couple Hosts Say "Failed To Install Virtual Center Agent Service" 99
Hi,
Did my upgrade to 2.5 tonight wihtout any hitches (at the moment) other than this, the below solved my issue with early non upto date 3.01 hosts;
service mgmt-vmware stop
/etc/init.d/vmware-vpxa stop
rpm -e VMware-vpxa-2.0.1-32042 (to delete the agent manually)
service mgmt-vmware restart
Leave host for a few minutes and then reconnect in VC.
Thanks
Dan
-
RELEVANCY SCORE 4.15
DB:4.15:Failed To Install The Virtual Center Agent Service 83
When I tried to add the ESX host to the Virtual center ..I get this message ....any suggestionsDB:4.15:Failed To Install The Virtual Center Agent Service 83
It worked ..Thank you/tmp/vmware-root directory -- created directory and it worked for all the ESX servers
-
RELEVANCY SCORE 4.12
DB:4.12:Gsx - Failed To Install/Upgrade Vmware Vc Agent 9c
I have a W2k3 Std box running Virtual Center 1.2.0-12684. When I try to add my GSX host running W2k3 STD w/GSX 3.2.0-14497 over port 902 I get an error - "Connection failed for host.myhost.com: Failed to install/upgrade VMware VirtualCenter agent". Is there anyway to install this agent manually? Has anyone else seen this issue, if so could you point me in the right direction?Thanks,
-Dave
DB:4.12:Gsx - Failed To Install/Upgrade Vmware Vc Agent 9c
OK - success at last. I found a knowledgebase article after more searching (search is your friend IF you are persistent) KB1449 article here: http://www.vmware.com/support/kb/enduser/std_adp.php?p_sid=lDhR4UNhp_lva=p_faqid=1449p_created=1097884047p_sp=cF9zcmNoPTEmcF9ncmlkc29ydD0mcF9yb3dfY250PTEwNDUmcF9zZWFyY2hfdGV4dD0gRmFpbGVkIHRvIGluc3RhbGwvdXBncmFkZSBWTXdhcmUgVmlydHVhbENlbnRlciBhZ2VudCZwX3NlYXJjaF90eXBlPTcmcF9wcm9kX2x2bDE9fmFueX4mcF9wcm9kX2x2bDI9fmFueX4mcF9zb3J0X2J5PWRmbHQmcF9wYWdlPTE*p_li=describes how to install the agent manually. Be advised however, on GSX in Windows run this from a command prompt because the install package from Vcenter fails. This is probably why the tools don't install automatically:
C:\vcagentccagent-upgrade-gsx-1-win32-9089.exe
UnZipSFX 5.50 of 17 February 2002, by Info-ZIP (Zip-Bugs@lists.wku.edu).
inflating: installer.exe
inflating: vmserverdWin32.exe
'.\installer.exe' is not recognized as an internal or external command,
operable program or batch file.
C:\vcagentinstaller.exe
Beginning upgrade...
Done (success).[/code]
So after the installer.exe is unzipped, just run that manually and you will be able to connect your GSX box.
-
RELEVANCY SCORE 4.08
DB:4.08:Cannot Install Vcenter Agent Service. Unknown Installer Error ds
I am getting this error while adding ESXI 4.0 host in Virtual center.
Cannot install vcenter agent service. unknown installer error.
After this error host showing disconnected.
Please find error screenshot attached.
Pelase help....
DB:4.08:Cannot Install Vcenter Agent Service. Unknown Installer Error ds
Your post has been moved to the ESXi forum.DaveVMware Communities User Moderator
Now available - vSphere Quick Start Guide
Do you have a system or PCI card working with VMDirectPath? Submit your specs to the Unofficial VMDirectPath HCL.
-
RELEVANCY SCORE 3.83
DB:3.83:Unable To Add Hyperv 2012r2 In Scvmm 2012r2 x3
Hi,
We're using SCVMM since 2008R2 with 2 Failover Cluster (one for management, the other for production)
So both cluster were in WS 2012 and we upgraded last week SCVMM 2012SP1 to SCVMM 2012R2. The next step was to upgrade the management cluster in WS 2012R2 and that's what we did with a fresh install.But we've past last 3 days trying to addone of 2012R2 management HyperVto SCVMM, failed every time. Each time we receive the following error messages in VMM :
Error (20413)
VMM encountered a critical exception and created an exception report at C:\ProgramData\VMMLogs\SCVMM.26b08abf-7be1-4a3b-8822-66f156081488\report.txt.
Recommended Action
See the report for more details and search user forums for well-known failure root causes for self-help.Here's what look like the log file :
----------------------------------------------------
------------------- Error Report -------------------
----------------------------------------------------
Error report created 06/12/2013 00:46:15
CLR is not terminating
----------------------------------------------------
--------------- Bucketing Parameters ---------------
----------------------------------------------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7510.0
P3(assemblyName)=WsManWrappers.dll
P4(assemblyVer)=3.2.7510.0
P5(methodName)=Microsoft.Carmine.WSManWrappers.MyIWSManSession.Enumerate
P6(exceptionType)=System.ArgumentException
P7(callstackHash)=de5d
SCVMM Version=3.2.7510.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7510.0
Executable Name=vmmservice.exe
Executable Version=3.2.7510.0
Base Exception Target Site=140703309339976
Base Exception Assembly name=WSManAutomation.dll
Base Exception Method Name=WSManAutomation.IWSManSession.Enumerate
Exception Message=The parameter is incorrect.
EIP=0x00007ff8723eab78
Build bit-size=64----------------------------------------------------
------------ exceptionObject.ToString() ------------
----------------------------------------------------
System.ArgumentException: The parameter is incorrect.
at WSManAutomation.IWSManSession.Enumerate(Object resourceUri, String filter, String dialect, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Enumerate(Object resourceUri, String filter, String dialect, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Enumerate(WSManUri url, String filter, String filterDialect, Type type, Boolean forceTypeCast, Boolean requestAssociationInstances)
at Microsoft.Carmine.WSManWrappers.WSManCachedRequest`1.Enumerate(String url, String wqlQuery)
at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Enumerate(String url, String wqlQuery)
at Microsoft.VirtualManager.Engine.Adhc.AddHyperVHostSubtask.EnableMpioOnWin8Host(Host lockedDbHost)
at Microsoft.VirtualManager.Engine.Adhc.AddHyperVHostSubtask.EnableMpio(Host lockedDbHost, Version osVersion)
at Microsoft.VirtualManager.Engine.Adhc.AddHyperVHostSubtask.RunDeploymentSubtasks(Host lockedDbHost)
at Microsoft.VirtualManager.Engine.Adhc.AddHostSubtask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)----------------------------------------------------
--------------- exception.StackTrace ---------------
----------------------------------------------------
at WSManAutomation.IWSManSession.Enumerate(Object resourceUri, String filter, String dialect, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Enumerate(Object resourceUri, String filter, String dialect, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Enumerate(WSManUri url, String filter, String filterDialect, Type type, Boolean forceTypeCast, Boolean requestAssociationInstances)
at Microsoft.Carmine.WSManWrappers.WSManCachedRequest`1.Enumerate(String url, String wqlQuery)
at Microsoft.Carmine.WSManWrappers.WSManRequest`1.Enumerate(String url, String wqlQuery)
at Microsoft.VirtualManager.Engine.Adhc.AddHyperVHostSubtask.EnableMpioOnWin8Host(Host lockedDbHost)
at Microsoft.VirtualManager.Engine.Adhc.AddHyperVHostSubtask.EnableMpio(Host lockedDbHost, Version osVersion)
at Microsoft.VirtualManager.Engine.Adhc.AddHyperVHostSubtask.RunDeploymentSubtasks(Host lockedDbHost)
at Microsoft.VirtualManager.Engine.Adhc.AddHostSubtask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)----------------------------------------------------
------------- StackTrace from handler --------------
----------------------------------------------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String localReportPath)
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()----------------------------------------------------
-------------------- Assemblies --------------------
----------------------------------------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Version=4.0.30319.34003
BuildType=retail
Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Version=4.0.30319.34003
BuildType=retail
Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Version=6.3.9600.16394
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Version=6.3.9600.16384
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7510.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Microsoft.Cryptography.DKM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.Cryptography.DKM.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.Cryptography.DKM.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Security, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Security\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Security.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Security\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Security.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework----------------------------------------------------
--------- Extra Data for Watson Report -------------
----------------------------------------------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 2248 (0x08c8)
Managed Thread ID = 42
Native Thread ID = 3980 (0x0f8c)And :
Error (441)
Agent communication is blocked. On HyperV FQDN, the version of virtualization software or the VMM agent is unsupported.
Recommended Action
Update the agent and virtualization software, and then try the operation again.Warning (13926)
Host clusterCluster FQDN was not fully refreshed because not all of the nodes could be contacted. Highly available storage and virtual switch information reported for this cluster might be inaccurate.
Recommended Action
Ensure that all the nodes are online and do not have Not Responding status in Virtual Machine Manager. Then refresh the host cluster again.
Then we've tried lot of combinations :
- New HyperV Fresh Install (FW disabled, Winrm qc, trustedhosts *)
- New SCVMM 2012 R2 Fresh Install (initially on WS 2012 Datacenter to WS 2012 R2 Datacenter)
- New SCVMM Database
- With our without failover cluster
- Installation of SCVMM agent on the host instead of from SCVMM console
- SCVMM Agent installed as perimiter host or not
- Tried to fix HyperV and SCVMM Server NetBIOS name and FQDN in hosts file
- Both VMM and HyperV are full updated, and without antivirus
So now we really don't know what's the mistake and why we cannot simply add 2012R2 HyperV in SCVMM
Any help would really be appreciated
BRDB:3.83:Unable To Add Hyperv 2012r2 In Scvmm 2012r2 x3
Just opened a case with Microsoft. Here was the answer we were given.
Symptom
When trying to add a specific host to SCVMM the service is crashing which prevents you from adding the host.
Cause
This is caused by a bug in the Windows 8 MPIO WMI provider code that incorrectly handles MPIO VendorDevice string lengths incorrectly. When the string
length of the string is less than 24 characters you will run into this issue.
Resolution
1. This issue is slated to be fixed in the next release of Windows.
2. To workaround the issue make sure the MPIO VendorDevice string that you enter into the MPIO console is exactly 24 characters. If the string is too short pad it with extra spaces. -
RELEVANCY SCORE 3.83
DB:3.83:Virtual Center 2.5 Running On Physical And Virtual With Sql 2005 Locally - Vc Service Starting Problems jz
HI all,I have put together the Strategy and Process of getting the Virtual Center Service Problem from Recurring.
Please make sure IIS is not running on this Box.
Decide if you are going to use Virtual or Physical instance of 2003 Server ( Remember 2ghz,2gb Ram Minimum)
Add Physical or Virtual Instance to the domainDomain
Create a VClogin Account in AD With admin Rights
Install SQL 2005 with Sp1 and Restart
Make sure the SQL Services And Agent Starts up Automatically
Open SQL Server Management Studio.
Create A Security Login called VcLogin with Password vclogin, Must be a Sysadmin role added to it. (Server Roles on the vclogin User Properties)
Create A database Called VCDB and add the vclogin as login User
in the security Folder on vclogin - make the default database VCDB. (Security/Users/vclogin)
on the VCDB Properties change the Owner to DBO.
Open Administrator Tools
DBL Click Data Sources (ODBC)
Create a System DSn using SQL Native Client.
Name VCDB, Server Local, use sql authentication - vclogin/vclogin
change database to VCDB
Test dataSource and click ok.
Virtual Center Process Of Installation
Install License Server First
Install Update Manager Second
Install Virtual Center
On the installation - use all default ports - when asked to use DB connection, Select Existing DSN.
Fill in the Required Fields - DSn Name:VCDB, Username:vclogin, Password:vclogin.
It will tell you about the file size growing to big.
next until finished.
After install is complete restart and check that the vc services have all started.
This Should Solve the servcies Problem with the Virtual center Service.
Please feel free to change any steps and post them here so we may make it easier to resolve problems like this.
Comptia A+ | Comptia N+ | CCNA |NES |HP ACT | EE N3 | MCP | MCTSx1 | MCITPx1 | SCS
DB:3.83:Virtual Center 2.5 Running On Physical And Virtual With Sql 2005 Locally - Vc Service Starting Problems jz
HI all,I have put together the Strategy and Process of getting the Virtual Center Service Problem from Recurring.
Please make sure IIS is not running on this Box.
Decide if you are going to use Virtual or Physical instance of 2003 Server ( Remember 2ghz,2gb Ram Minimum)
Add Physical or Virtual Instance to the domainDomain
Create a VClogin Account in AD With admin Rights
Install SQL 2005 with Sp1 and Restart
Make sure the SQL Services And Agent Starts up Automatically
Open SQL Server Management Studio.
Create A Security Login called VcLogin with Password vclogin, Must be a Sysadmin role added to it. (Server Roles on the vclogin User Properties)
Create A database Called VCDB and add the vclogin as login User
in the security Folder on vclogin - make the default database VCDB. (Security/Users/vclogin)
on the VCDB Properties change the Owner to DBO.
Open Administrator Tools
DBL Click Data Sources (ODBC)
Create a System DSn using SQL Native Client.
Name VCDB, Server Local, use sql authentication - vclogin/vclogin
change database to VCDB
Test dataSource and click ok.
Virtual Center Process Of Installation
Install License Server First
Install Update Manager Second
Install Virtual Center
On the installation - use all default ports - when asked to use DB connection, Select Existing DSN.
Fill in the Required Fields - DSn Name:VCDB, Username:vclogin, Password:vclogin.
It will tell you about the file size growing to big.
next until finished.
After install is complete restart and check that the vc services have all started.
This Should Solve the servcies Problem with the Virtual center Service.
Please feel free to change any steps and post them here so we may make it easier to resolve problems like this.
Comptia A+ | Comptia N+ | CCNA |NES |HP ACT | EE N3 | MCP | MCTSx1 | MCITPx1 | SCS
-
RELEVANCY SCORE 3.54
DB:3.54:Using App Manager With Virtual Center 9k
I am trying to install the Appmanager agent on my Virtual Center and am having configuration problems.I installed this on a test VC system that uses the Access db, by using a local admin account to authenticate the VC web service, but that doesn't appear to work when using SQL. I am guessing what I need is a domain account that is a local admin and has rights to the SQL database. If anyone is running this config and could offer any tips, I would appreciate it.
Message was edited by:
hickman
DB:3.54:Using App Manager With Virtual Center 9k
You hit the nail on the head.Domain account with local admin privs on the server.SQL needs System DN connection.
-
RELEVANCY SCORE 3.53
DB:3.53:Where Can I Run Vmm Agent? zp
We install System Center Virtual Machine Manager on a Windows 2008 R2. When I try to add a host, it asks Security file path. Where is the Security file path?
After search in the internet, I think I may need to run VMM Agent. However, I don't see the VMM agent in the programs. If I try to install the VMM agent, it says Server which contains all agent components is already installed. It is true because I can see
teh VMM agent service is running, but where is the VMM agent. Or where I can run the VMM agent? Here is the screenshot:
http://chicagotech.net/server/vmm1.htmlBob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.netHow to Setup Windows, Network, VPN Remote Access on
http://www.howtonetworking.comDB:3.53:Where Can I Run Vmm Agent? zp
Thank you Rajeet. It seems to work now.Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.netHow to Setup Windows, Network, VPN Remote Access on
http://www.howtonetworking.com -
RELEVANCY SCORE 3.44
DB:3.44:Upgrade To Scom 2012 Agent - 25211.Failed To Install Performance Counters.. Error Code: -2147024809 (The Parameters Is Incorrect) d8
I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).Event ID: 1008
The Open Procedure for service HealthService in DLL C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.Any idea why I receive this error?
Thanks
MikeDB:3.44:Upgrade To Scom 2012 Agent - 25211.Failed To Install Performance Counters.. Error Code: -2147024809 (The Parameters Is Incorrect) d8
Any copy of the article? Link is dead :(
-
RELEVANCY SCORE 3.37
DB:3.37:"Failed To Delete Web Access Service" Error During 2.5.0_104263 Upgrade d8
I am upgrading my Virtual Center Server to 2.5.0_104263 from 2.5.0_64192 and I received the error message "Unable to delete web access service" and the install rolled back and bombed. (I had to restore the database from backup to restart the Virtual Center Server service). The components I was upgrading were Virtual Center Server and Enterprise Converter. Has anyone else come across this or do any of you have any ideas?DB:3.37:"Failed To Delete Web Access Service" Error During 2.5.0_104263 Upgrade d8
I am upgrading my Virtual Center Server to 2.5.0_104263 from 2.5.0_64192 and I received the error message "Unable to delete web access service" and the install rolled back and bombed. (I had to restore the database from backup to restart the Virtual Center Server service). The components I was upgrading were Virtual Center Server and Enterprise Converter. Has anyone else come across this or do any of you have any ideas? -
RELEVANCY SCORE 3.33
DB:3.33:Cannot Get Guest Services To Start On Virtual Domain Controller 9s
I'm running System Center 2012 SP1 Version 3.1.6018.0
Guests all run Server 2008R2 SP1
I'm having a weird issue when trying to install guests services on a domain controller. On all of the virtual machines of the host, when trying to deploy the guest agent, it fails on all machines with the same error:
Error (2940)
VMM is unable to complete the requested file transfer. The connection to the HTTP server XXXXXXX could not be established.
Unknown error (0x80072ee2)Recommended Action
Ensure that the HTTP service and/or the agent on the machine powstorehv1.gicw.org are installed and running and that a firewall is not blocking HTTP/HTTPS traffic on the configured port.
I have confirmed that there is no firewall blocking the process so in order to bypass this, I decided to just install the guest agent manually. This worked on all of the virtual machines on the host except for the one that is a Domain Controller.
At the point when it tries to start the service it gives me the following error:
Service 'Microsoft System Center Virtual Machine Manager Guest Agent' (ScvmmGuestService) failed to start. Verify that you have sufficient privileges to start system services.
I have tried with and without UAC enabled and I always run the MSI from an elevated command prompt. I've tried with and without MSIEXEC as well. I have Enterprise and Domain Admin privileges as well and have even tried with the domain administrator account.
At this point I'm not sure why I do not have sufficient privileges to start the service on a Domain Controller but I do understand that permissions are different due to its nature.
Any ideas around this either by installing through SCVMM or manually? Thank you in advance for your time!DB:3.33:Cannot Get Guest Services To Start On Virtual Domain Controller 9s
I'm running System Center 2012 SP1 Version 3.1.6018.0
Guests all run Server 2008R2 SP1
I'm having a weird issue when trying to install guests services on a domain controller. On all of the virtual machines of the host, when trying to deploy the guest agent, it fails on all machines with the same error:
Error (2940)
VMM is unable to complete the requested file transfer. The connection to the HTTP server XXXXXXX could not be established.
Unknown error (0x80072ee2)Recommended Action
Ensure that the HTTP service and/or the agent on the machine powstorehv1.gicw.org are installed and running and that a firewall is not blocking HTTP/HTTPS traffic on the configured port.
I have confirmed that there is no firewall blocking the process so in order to bypass this, I decided to just install the guest agent manually. This worked on all of the virtual machines on the host except for the one that is a Domain Controller.
At the point when it tries to start the service it gives me the following error:
Service 'Microsoft System Center Virtual Machine Manager Guest Agent' (ScvmmGuestService) failed to start. Verify that you have sufficient privileges to start system services.
I have tried with and without UAC enabled and I always run the MSI from an elevated command prompt. I've tried with and without MSIEXEC as well. I have Enterprise and Domain Admin privileges as well and have even tried with the domain administrator account.
At this point I'm not sure why I do not have sufficient privileges to start the service on a Domain Controller but I do understand that permissions are different due to its nature.
Any ideas around this either by installing through SCVMM or manually? Thank you in advance for your time! -
RELEVANCY SCORE 3.33
DB:3.33:Backup Virtual Machine On Vsphere jm
Hi,Do I need to install vcb on the virtual center to backup the ESX where it has server virtal machines?
If I purchase the Symantec AVVI, how do i install the agent for vmware virtual infrastructure (AVVI). I' using symantec backup to backup the virtual machine.
Thanks for your patience
DB:3.33:Backup Virtual Machine On Vsphere jm
I suggest to install VCB Framework on your backup machine.For AVVI there isn't an agent to install, you have to specify the creadential to connecto to vCenter and VCB proxy.
In this case you haven't the need to configure VCB.
See also:
VMware Consolidated Backup (VCB)
Andre
-
RELEVANCY SCORE 3.31
DB:3.31:P2v Agent Not Starting 38
Hi,
I've recently upgraded to SCVMM 2012 and want to P2V a current machine. However when I get to the scan section (as in other threads on here) it hangs and when I install it from the command line with the log file output, it also hangs.When I check the services the VMMp2vagent is continually 'starting'. hence the hang. I flicked it to manual and restarted so I could change the log on account and still no luck.
I've tried installing this as administrator and still nothing, seeing as the log points to permissions, am I missing something glaringly obvious?
The event log throws up event ID 7031 saying the service terminated unexpectedly.The vmm log created shows:
MSI (s) (A0:48) [10:47:36:204]: Product: Microsoft System Center Virtual Machine Manager P2V Agent (x64) -- Error 1920. Service 'Virtual Machine Manager P2V Agent' (VMMP2VAgent) failed to start. Verify that you have sufficient privileges to start system
services.MSI (s) (A0:48) [10:47:36:204]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 19
MSI (s) (A0:48) [10:47:36:204]: Note: 1: 2502
MSI (s) (A0:48) [10:47:36:204]: Product: Microsoft System Center Virtual Machine Manager P2V Agent (x64) -- The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2502. The
arguments are: , ,DB:3.31:P2v Agent Not Starting 38
I would like to confirm what is the current situation? Have you resolved the problem?If there is anything that we can do for you, please do not hesitate to let us know, and we will be happy to help.Mohamed Fawzi | http://fawzi.wordpress.com
-
RELEVANCY SCORE 3.31
DB:3.31:Failed To Install/Upgrade Vmware Virtualcenter Agent sa
History: An end user here added his GSX 3.2 host to VC 1.4, he then Disconnected from VC1.4 and tried adding it back to VC 1.3 as a host. Is this supported?Error trying to add the host to VC 1.3
= "Connection failed for XX.XX.XX.XX: Failed to install/upgrade VMWare VirtualCenter Agent"
Is this expected?
Is there a way to downgrade the Virtual Center Agent on the GSX Host so it can be added back to VC 1.3.
Thanks,
S
DB:3.31:Failed To Install/Upgrade Vmware Virtualcenter Agent sa
Since you had VC 1.4 installed and you went back to VC 1.3. Your GSX server most likely now has a version of vmware-serverd that is not compatible with GSX VC 1.3I recommend that you uninstall GSX and manually remove any files left in /usr/bin /usr/sbin /usr/lib/vmware..etc that the uninstall may have not have removed.
Skip the above step if GSX is on Windows host.
Now reinstall GSX and see if you can add it back to VC 1.3
The uninstall of GSX will not delete any VM's
-
RELEVANCY SCORE 3.31
DB:3.31:P2v Exchange 2007 Server 2003 64-Bit P2v Errors za
Hello, we are trying to conver our Server 2003 64-bit enterprise Exchange 2007 server to VM using P2V. The process succeeds with the exception of Install VM components which fails at 99%. Our SCVMM job logs show the following:
Warning (13210)
Timeout occurred while waiting for VM integration services to be installed on virtual machine EXCHSVR residing on host TNEHV.tneusa.com.
Recommended Action
Ensure that the version of the VM integration services binaries matches the version of the guest operating system in the virtual machine and then try the operation again.
Warning (13223)
An error occurred while Virtual Guest Services were being installed on virtual machine EXCHSVR residing on host TNEHV.tneusa.com.
Recommended Action
See Help for the Virtual Guest Services installer, resolve any issues preventing the installation from succeeding, and then try the operation again.
Warning (458)
The Virtual Machine Manager agent could not be removed from 10.100.253.5.
Recommended Action
Uninstall the Virtual Machine Manager agent using Add or Remove Programs on 10.100.253.5.
Warning (415)
Agent installation failed copying C:\Program Files\Microsoft System Center Virtual Machine Manager 2008\agents\I386\2.0.3444.0\msiInstaller.exe to \\10.100.253.5\ADMIN$\msiInstaller.exe.
(The network path was not found)
Recommended Action
1. Ensure 10.100.253.5 is online and not blocked by a firewall.
2. Ensure that there is sufficient free space on the system volume.
3. Verify that the ADMIN$ share on 10.100.253.5 exists. If the ADMIN$ share does not exist, reboot 10.100.253.5 and then try the operation again.
(in order from top of log to bottom)When starting the VM, all of our exchange services, blackberry services, and the netlogon service fails. We are stuck on preparing network connections applying computer settings for 16 minutes on the dot.When we attempt to remove VM Components using add remove programs, it just hangs on the first step--Inspecting Current Configuration.A repair also hangs with a bar going from left to right.What are we doing wrong and how can this be solved?DB:3.31:P2v Exchange 2007 Server 2003 64-Bit P2v Errors za
try to add a legacy network adaptor and start the VM. then try to re-install the IC
Fawzi -
RELEVANCY SCORE 3.27
DB:3.27:Error 324: The Agent Operation Failed Because The Dpm Agent Coordinator Service On {Computer Name} Did Not Respond. kd
We using DPM 2010 on Windows Server 2008, we trying to install agent to other server which running Windows Server 2008 Standard 64Bit.
DPM 2010 already been applied:
- QFE Rollup for System Center Data Protection Manager 2010 (KB2250444)
- QFE Rollup Package 2 for System Center Data Protection Manager 2010 (KB2465832)
- Hotfix Package for System Center Data Protection Manager 2007 (KB970868) (x86 x64) **Doesn't work/unable to install**
How to fix this error?
Install protection agent on {COMPUTERNAME} failed:
Error 324: The agent operation failed because the DPM Agent Coordinator service on
{COMPUTERNAME} did not respond.
Error details: Internal error code: 0x8099090E
Recommended action: Do the following to troubleshoot this issue:
1) Verify that {COMPUTERNAME} is remotely accessible from the DPM server.
2) If a firewall is enabled on {COMPUTERNAME}, make sure that it is not blocking requests from the DPM server and has an exception for Windows Management Instrumentation(WMI).
3) Try installing the agent manually by selecting Attach Agents in the agent installation wizard.To troubleshoot this problem, refer to http://go.microsoft.com/fwlink/?LinkId=157614
We tried to disable firewall also same problem.
Mostly target machines running Windows Server Standard/Enterprise 64Bit
Also tried attached the agent from DPM 2010, still same problem.
How to fix this issue?DB:3.27:Error 324: The Agent Operation Failed Because The Dpm Agent Coordinator Service On {Computer Name} Did Not Respond. kd
Hi
You can also look here if your issue has not been resolved:
http://sys-center.blogspot.com/2008/05/dpm-error-324.html -
RELEVANCY SCORE 3.25
DB:3.25:Cant Add Host To Vc 2.5 s3
Hi all,
I have just installed the last version of esx 3.5 from the site. And also the last version of virtual center 2.5 from the site.
The installation of both went fine until i tried to add the host, then the center enters a phase of "in progress" and after about 5-10 minutes end with an error that "failed to install the virtualcenter agent service".
I will add that they are behind firewall but i have opened all the ports between the servers.
Is there a manual install of the virtualcenter agent? or something else that i need to configure?
this is the first time that something likde that happens, if anyone have an idea, please
Thanks
Ronen
DB:3.25:Cant Add Host To Vc 2.5 s3
Hi Ronen,
We only implemented VC2.5 to manage our mixed 3.0.1 and 3.5 ESX server. We googled the error, and found the article. We only had to follow the first part of the article, and create the temporary directory as described in the article.
Hope this put you somewhat more at ease.
If the comments were useful, please consider awarding points.
Thanks
SA -
-
RELEVANCY SCORE 3.13
DB:3.13:Vmm2008 - Agent Installation Failure 1m
Agent failing to install through VMM or manual installation:
2008 DataCenter - Full Installation
Hyper-V RC0
Any help would be appreciated.
The following event logs are generated:
Log Name: ApplicationSource: MsiInstallerDate: 4/29/2008 8:53:14 PMEvent ID: 11708Task Category: NoneLevel: InformationKeywords: ClassicUser:
Computer: Description:Product: System Center Virtual Machine Manager Agent (x64) -- Installation failed.Event Xml:Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event System Provider Name=MsiInstaller / EventID Qualifiers=011708/EventID Level4/Level Task0/Task Keywords0x80000000000000/Keywords TimeCreated SystemTime=2008-04-30T01:53:14.000Z / EventRecordID1183/EventRecordID ChannelApplication/Channel Computer/Computer Security UserID= / /System EventData DataProduct: System Center Virtual Machine Manager Agent (x64) -- Installation failed./Data Data(NULL)/Data Data(NULL)/Data Data(NULL)/Data Data(NULL)/Data Data /Data Data /Data Binary7B46313439333439362D354245442D343630462D393541392D3543354232373346464543397D/Binary /EventData/Event
Log Name: ApplicationSource: MsiInstallerDate: 4/29/2008 8:53:14 PMEvent ID: 1033Task Category: NoneLevel: InformationKeywords: ClassicUser: Computer:
Description:Windows Installer installed the product. Product Name: System Center Virtual Machine Manager Agent (x64). Product Version: 2.0.3194.0. Product Language: 1033. Installation success or error status: 1603.Event Xml:Event xmlns=http://schemas.microsoft.com/win/2004/08/events/event System Provider Name=MsiInstaller / EventID Qualifiers=01033/EventID Level4/Level Task0/Task Keywords0x80000000000000/Keywords TimeCreated SystemTime=2008-04-30T01:53:14.000Z / EventRecordID1184/EventRecordID ChannelApplication/Channel Computer/Computer Security UserID= / /System EventData DataSystem Center Virtual Machine Manager Agent (x64)/Data Data2.0.3194.0/Data Data1033/Data Data1603/Data Data(NULL)/Data Data /Data Data /Data Binary7B46313439333439362D354245442D343630462D393541392D3543354232373346464543397D/Binary /EventData/EventDB:3.13:Vmm2008 - Agent Installation Failure 1m
I got similar error today while installing vmm 2012 admin console on a 32bit win7 guest.
can you disable uac and try it again?(reboot needed) that solved my problem.
-
RELEVANCY SCORE 3.12
DB:3.12:Scom 2007 R2 Agent Installation Fails fd
Hello, I am trying to push the agent to a windows 2000 server (the dns suffix are correct in all the area) by discovery and manully but both fails due to the following error:
The Agent Management Operation Agent Install failed for remote computer .....Install account: domain\action account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file (null) on the Management Server.
I searched and read Kevins Holman's OpsMgr Blog for this error and it's recommending the following solutions:
Agent Management Operation Agent Install failed for remote computer dc1.opsmgr.net.
Install account: OPSMGR\localadmin
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\DC1AgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\DC1MOMAgentMgmt.log on the Management Server.
Solution: Enable the automatic Updates service. Install the agent then disable the auto-updates service if desired.
This service is enabled as well as Windows Installer service. Could someone help me to resolve this issue? I appreciate any help
ZibaDB:3.12:Scom 2007 R2 Agent Installation Fails fd
Hi Ziba,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as Answered as the previous steps should be helpful for many similar scenarios.
In addition, wed love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
RELEVANCY SCORE 3.12
DB:3.12:Comms Between Virtual Center And Esx Host ka
I have 3 ESX 2.5 U2 hosts connected to a VC 2.5 U2 Server. On one of the hosts I had to restart the mgmt-vmware service. Now Virtual Center can connect to the host and control it in most ways, but when I try to change the Virtual Machine startup /power off settings I get the error:
Failed tocommunicate with the remote host, either due to network errors or because the host is not responding.
I have restarted the vpxa VC agent and if I connect the VI client directly to the host, I change the settings without issue. I cant see anything in the vpxa.log.
Any ideas?
DB:3.12:Comms Between Virtual Center And Esx Host ka
Hello,You also want to migrate VC to Update 3, as there are some patches there that affect HA and a few other things.
Best regards,
Edward L. Haletky
VMware Communities User Moderator
====
Author of the book 'VMWare ESX Server in the Enterprise: Planning and Securing Virtualization Servers', Copyright 2008 Pearson Education.
SearchVMware Blog: http://itknowledgeexchange.techtarget.com/virtualization-pro/
Blue Gears Blogs - http://www.itworld.com/ and http://www.networkworld.com/community/haletky
As well as the Virtualization Wiki at http://www.astroarch.com/wiki/index.php/Virtualization
-
RELEVANCY SCORE 3.12
DB:3.12:Microsoft System Center Data Protection Manager 2010 Client Makinalara Agent Kurulumu ja
Merhabalar ; DPM yazılımı Domain Controller Sunucu su zerinde Kurulu , Client makinalara ( windows 7 pro ) agent kurulumu yapmak isterken Aşagıdaki hatayı alıyorum,
Install protection agent on makinaadı.domainadi.local failed:
Error 303: The protection agent operation failed onmakinaadı.domainadi.local
Error details: The group name could not be found
Recommended action: Review the error details, take the appropriate action, and then retry the agent operationDB:3.12:Microsoft System Center Data Protection Manager 2010 Client Makinalara Agent Kurulumu ja
Merhaba,Dpm agentı http://www.ugurdemir.net/2012/07/data-protection-manager-2012-agent-yukleme-islemi/ bu şekilde kurabilirsiniz.
Keyifli çalışmalar.www.ugurdemir.net -
RELEVANCY SCORE 3.11
DB:3.11:Help Me: Agent Service Failed f7
I install oracle database 9.2.0.4 on Red Hat AS 4 and have error:
Parameter "nodeinfo"=NO_VALUE
Agent Service FailedHelp me to fix this error. Thanks
DB:3.11:Help Me: Agent Service Failed f7
Certify says :
Oracle9i, release 2 (9.2.0.6) is available on Red Hat Enterprise Linux 4 systems. Before you install Oracle9i on Red Hat Enterprise Linux 4, review the Oracle9i Release Notes Release 2 (9.2.0.4.0) for Linux x86, part number B13670-05. This document is available from the Documentation page on the Oracle Technology Network Web site. -
RELEVANCY SCORE 3.09
DB:3.09:Vmm P2v Agent (X64). Installation Success Or Error Status: 1603. pj
Hi there,
I've just run out of ideas trying to troubleshoot my issue with installing the P2V agent on a Windows Server 2008 server. I started off trying to do the install using SCE 2010 GUI. This failed and I received a message that said the source server
was uncontactable. I rebooted the source server and tried again. This time I got a message indicating there was a problem with the agent on the server and that I needed to reinstall agent. I checked the source server Programs and Features
and found no trace of the P2V agent. I checked Windows Services and there is a service for the P2V agent. I tried to start the service and it says it cannot find the file. I checked
C:\Program Files and found there was a folder named Microsoft System Center Virtual Machine Manager 2008 P2V Agent
however only a folder named bin existed within it and no files in the folder
bin.
I tried to install over the top using the vmmP2Vsource.msi however it says another version of the agent already exists. I have also tried to run the msi with the /uninstall switch with no luck.
I expect my problem will be fixed if I can manually remove the partially installed agent but need some advice on how to do so safely.
Appreciate any advice you all can provide!DB:3.09:Vmm P2v Agent (X64). Installation Success Or Error Status: 1603. pj
Hi Harry,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as Answered as the previous steps should be helpful for many similar scenarios.
In addition, wed love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar problems.
Thanks,Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
RELEVANCY SCORE 3.08
DB:3.08:Virtual Center Service Will Not Start On Bootbut Will Start Manually 37
I am having an issue with the Virtual Center Service on my server. This server is running Virtual Center as well as a local install of SQL Server 2005 EE with sp2. When you boot up the server I receive the following error.
"Description:
The description for Event ID ( 1000 ) in Source ( VMware VirtualCenter Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Failed to initialize VMware VirtualCenter. Shutting down...."
If I manually start the service it works properly. It is also worth noting that prior to this error message I get a SQL Server Error stating that the SQL account used to access the VMWare Database failed. Based on the other SQL Server event entries I believe this is a case of SQL not starting up completely before Virtual Center tries to access the install. If this was the problem, I would think that the default service setting that tries to restart the service every 5 minutes would kick in. It is not.
Any suggestions would be appreciated.
Server Info
Win2k3 EE SP2
SQL Server 2005 EE SP2
Virtual Center 2.5.0 build 64192
Virtual Center service is using Local System account
ODBC connection is setup to use SQL authentication and has dbo access to VMWare Database and MSDB database.
DB:3.08:Virtual Center Service Will Not Start On Bootbut Will Start Manually 37
Tom,
Thanks. That fixed the issue. I used the registry to edit the dependencies on the VC service, rebooted.....no more error.
-
RELEVANCY SCORE 3.07
DB:3.07:Failed To Install The Virtualcenter Agent Service" When Trying To Add A 3.0 17
Failed to install the VirtualCenter agent service" when trying to add a 3.01 server to virtual center 2.02.Others added correctly - both 3.01 and 3.02
DB:3.07:Failed To Install The Virtualcenter Agent Service" When Trying To Add A 3.0 17
Had the same problem and restarted the agents on the hosts and all was good. -
RELEVANCY SCORE 3.07
DB:3.07:Error - Failed To Install Virtual Center Agent Service 18
Folks,I get the error "failed to install virtual center agent service" when I try to add my ESX 3.0.1 Host on my VC 2.0.
I did checked the available free space on my Host and everything is fine with that.
I am able to Add the Same ESX Host on a different VC without any errors. is there some thing that is messed up with my first VC Server? Any thoughts???
Thanks!
DB:3.07:Error - Failed To Install Virtual Center Agent Service 18
Make sure that the NICs on both the VC server and the ESX hosts are set correctly. I ran into this problem at a client site and assumed that their speed/duplex was set correctly only to find out a couple of hours later, head banging included, that their NICs and switch ports were not set correctly. The choppy RDP performance should have been a clue.:-) -
RELEVANCY SCORE 3.06
DB:3.06:Virtual Center 2.5 Install Problem 7j
I am having a problem installing 2.5 Virtual Center on my W2003 SP2 boxSo far I have
installed SQl 2005 native client on the VC
created a new database on my SQL 2005 server
created a new SQL id and given it DBO permissions on the database and the MSDB database
started the install of VC 2.5
created the File DSN ODBC called VMWare VirtualCenter accessing the above new database and SQL ID - it tests fine
However when i get to the point where the database and id is specified in the VC 2.5 install wizard I get
'setup failed to connect to the database. Please make sure you entered the correct data source name, username and password.'
i know these details are correct as the File DSN connects fine when I configure it with identical details.
if I try a System DSN i get 'please make sure the SQL agent service is running on the database server' - if I click OK - I get warning that the databsae is set to full recovery - then the install proceeds - then I get 'error 25003 - setup failed to create the Virtual center repository'
I have tried repeating the process even with new databases but it fails at the same place
Any ideas anyone ?
DB:3.06:Virtual Center 2.5 Install Problem 7j
hi Troy
Yes I have those permissions in place - dbo rights on thee MSDB database
-
RELEVANCY SCORE 3.04
DB:3.04:Is Possible To Install Virtual Center As A Virtual Machine? 98
HiIs possible to install Virtual Center as a Virtual Machine?. If not, is possible to install Virtual Center in a Windows Cluster?.
Thanks,
DB:3.04:Is Possible To Install Virtual Center As A Virtual Machine? 98
It is probably clusterable as far as SQL is clusterable, not VC itself. -
RELEVANCY SCORE 3.04
DB:3.04:Virtual Desktop Agent Instalation Problem 8x
Hello everyone,
I am trying to install the vda-agent.msi on spanish windows
2003 SP2R2 where it already installed the Virtual Center 2.5 and the
installation ends with error without giving further information.The log msiexec provides little information:
=== Verbose logging started: 24/07/2008 14:55:22 Build type: SHIP
UNICODE 3.01.4000.1830 Calling process: C:\WINDOWS
\system32\msiexec.exe ===
MSI (c) (7C:44) [14:55:22:718]: Resetting cached policy values
MSI (c) (7C:44) [14:55:22:718]: Machine policy value 'Debug' is 0
MSI (c) (7C:44) [14:55:22:718]: ******* RunEngine:
******* Product: vda-agent.msi
******* Action:
******* CommandLine: **********
...
...
...
Action 14:55:27: CreateCertificate.
MSI (s) (B0:28) [14:55:27:484]: Executing op:
CustomActionSchedule(Action=CreateCertificate,ActionType=1025,Source=BinaryData,Target=CreateCertificate,CustomActionData=C:
\Archivos de programa\Sun\Virtual Desktop Access\Agent\)
MSI (s) (B0:08) [14:55:27:484]: Invoking remote custom action. DLL: C:
\WINDOWS\Installer\MSI1E.tmp, Entrypoint: CreateCertificate
MSI (s) (B0:CC) [14:55:27:484]: Generating random cookie.
MSI (s) (B0:CC) [14:55:27:484]: Created Custom Action Server with PID
2636 (0xA4C).
MSI (s) (B0:F4) [14:55:27:500]: Running as a service.
MSI (s) (B0:F4) [14:55:27:500]: Hello, I'm your 32bit Impersonated
custom action server.
Action ended 14:55:27: InstallFinalize. Return value 3.
...
...
...
=== Logging stopped: 24/07/2008 14:55:30 ===
MSI (c) (7C:44) [14:55:30:515]: Note: 1: 1708
MSI (c) (7C:44) [14:55:30:515]: Product: Sun Virtual Desktop Connector
Agent -- Installation failed.MSI (c) (7C:44) [14:55:30:515]: Grabbed execution mutex.
MSI (c) (7C:44) [14:55:30:515]: Cleaning up uninstalled install
packages, if any exist
MSI (c) (7C:44) [14:55:30:515]: MainEngineThread is returning 1603
=== Verbose logging stopped: 24/07/2008 14:55:30 ===Someone attempted to install the agent on a non-English windows?
Any suggestions?Thxs,
Mariano
DB:3.04:Virtual Desktop Agent Instalation Problem 8x
Hi Wai,
Thank you so much the problem is solved with the patch 138482-016675420 VDA Agent can not be installed on non-Windows versions english
Mariano
-
RELEVANCY SCORE 3.03
DB:3.03:Setup Failed To Format Virtualcenter Database Virtual Center Install Error 9p
I have 2003 enterprise Virtual Center,SQL 2000 + SP3,
I had
Setup failed to format VirtualCenter database.
ODBC is working OK.
Please give me advice.
DB:3.03:Setup Failed To Format Virtualcenter Database Virtual Center Install Error 9p
I had a password with spaces in it and I had the same 25003 error. Changing to a password with no spaces fixed it. -
RELEVANCY SCORE 3.02
DB:3.02:Scvmm 2008 fa
WE had our SCVVMM 2008 Working fine with our 3 node cluster of Windows Server 2008 Hyper-V Machines. But now SCVMM is having difficulties communicating with the 3 node cluster. IF we try to reinstall the agent we get the following message. Product: Microsoft System Center Virtual Machine Manager Agent (x64) -- Failed to configure the WS-Management service. In the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service. Anyone have any ideas? Thanks Bill Bacoyiannis
DB:3.02:Scvmm 2008 fa
Hi,
According to the description, the issue seems to be related to SCVMM. As we mainly focus on the Hyper-V question about Windows Server system and here is not the best support resource for SCVMM, it is recommend you to get further support in the corresponding community so that you can get the most qualified pool of respondents. Thanks for your understanding.
For your convenience, I have list the related link as followed.
System Center Virtual Machine Manager
http://social.technet.microsoft.com/Forums/en-US/category/virtualmachinemanager
Best Regards,
Vincent Hu -
RELEVANCY SCORE 3.02
DB:3.02:Vcenter Agent mm
Failed to install virutal center agent -USB stick corruptedDB:3.02:Vcenter Agent mm
With the information you provide, the only answer I can give is: "Replace it!"Andr
-
RELEVANCY SCORE 3.02
DB:3.02:Virtual Center 2.0.1 Patch 1 9p
Hi everybody Guys,yesterday after some weeks planning, we just installed VC2.0.1 patch 1.
I'd like to notice that the Install Guide of VMWARE says that (as all the upgrade process for a service) you have to make a backup copy of the VC DB, even if no modification to the schema of the DB is made during Installation.
http://www.vmware.com/support/vi3/doc/vc-201-200611-patch.html#installing
Notice that on a SQL Server 2000 English SP4, after applaying the patch, the tables describing the entire Datacenter Structure on the DB were empty.
So:
1 - stop Virtual Center Server Service
2 - restore SQL Server 2000 DB
3 - start Virtual Center Server Service
After that Datacenter Structure becomes available;
then VC starts upgrading the VC Agent of the Hosts of the Datacenter.
If the process fail, try to reapply HA configuration on the single Host.
Thus[/b]: BACKUP BACKUP BACKUP before Starting everything!!!
Bye
DB:3.02:Virtual Center 2.0.1 Patch 1 9p
Hi everybody Guys,yesterday after some weeks planning, we just installed VC2.0.1 patch 1.
I'd like to notice that the Install Guide of VMWARE says that (as all the upgrade process for a service) you have to make a backup copy of the VC DB, even if no modification to the schema of the DB is made during Installation.
http://www.vmware.com/support/vi3/doc/vc-201-200611-patch.html#installing
Notice that on a SQL Server 2000 English SP4, after applaying the patch, the tables describing the entire Datacenter Structure on the DB were empty.
So:
1 - stop Virtual Center Server Service
2 - restore SQL Server 2000 DB
3 - start Virtual Center Server Service
After that Datacenter Structure becomes available;
then VC starts upgrading the VC Agent of the Hosts of the Datacenter.
If the process fail, try to reapply HA configuration on the single Host.
Thus[/b]: BACKUP BACKUP BACKUP before Starting everything!!!
Bye
-
RELEVANCY SCORE 3.01
DB:3.01:Problem Adding A Host To Vc2 7j
Hiim trying to add two esx 2.5.3 hosts to my VC2 inventory...
first i was getting the "Failed to install the Virtual Center agent service" while trying to connect to the hosts from VC, then i installed the vpx-upgrade-esx-5-linux-27704 on both hosts manualy.
one of the got connected, the other still shows the same error message, i already rebooted after aplying the update, but its not letting me connect to the host from vc
id appreciate little help on this
thank you.
DB:3.01:Problem Adding A Host To Vc2 7j
ty.i added the host again to virtual center 1.4 and something strange happens. they connect and disconnect automatically after a few seconds.
anyway i removed again the servers from VC 1.4's inventory and tried to add again in the VC 2's one but same behaviour... i can succesfully add only one of them, the other yet shows the "fail to install vc agent service" message.
this is giving me a real pain
help pls
-
db: Intermittent (yet constant) signal loss
db: Deconfirmation of Scheduled Line stock
db: 9800 Touch screen not working
db: How do I keep my podcast downloads after sync to iPhone with podcast app?
db: CA2000 with try...catch...finally block
db: WAAS solution elements (new stuff for me)
db: Nicht erkennbares Datenbankformat
db: Formating Hard drive
-
RELEVANCY SCORE 2.99
DB:2.99:Esxi Evaluation Mode With Virtual Center 1.4.1 Evaluation Mode Server Agent Not Responding kz
Hello,
I am hoping to get a little help here. Dowloaded and install ESXi and have left it in evaluation mode (did not enter licenesing info yet) Also downloaded Virtual Center and installed it. Tried to connect via localhost, but it was looking for the licens file. I created and installed one (Virtual Center 1.4 adn VC Agent for VMware Server 16-CPU) Was able to log into Virtual Center. Created a server farm and tried to add the ESXi host using the wizard. Whenever I do, I get Connection Failed for x.x.x.x Server agent not responding
x.x.x.x is the ip address of the ESXi server. If it intentionally screw up the password, it does tell me the pw is invalid, so I know it is contacting the server.
I have read all the postings about purchasing licensing, but in the evaluation modes, I thought this should work.
Any ideas???? Your help would be much appreciated.
Thanks,
Gene
DB:2.99:Esxi Evaluation Mode With Virtual Center 1.4.1 Evaluation Mode Server Agent Not Responding kz
Thank you..Thank you...Thank you. I beleive I accidentaly downloaded the VMServer Virtual Center by mistake and not the VM Infrastrucutre......Excellent and I appreciate the quick reply. Have a super day!!!!
Gene
-
RELEVANCY SCORE 2.99
DB:2.99:Can't Re-Enablig Ha After Migration From Virtual Center 2.0 To Viretual Center 2.5 8f
Hi,
I've migrated my Virtual Center from 2.0 to 2.5 and I'd a problem this page http://www.vmwarewolf.com/failed-to-install-the-virtualcenter-agent-service/ has solved.
Then I can connect on mys ESX servers (3.0.2) but can't re-enable HA. I Tried all the solutions found in the vmwarewolf page but none succeed...
When I try to enable HA I obtain on each host of my cluster : An error occured during configuration of the ha Agent on the host...
Any Idea ?
DB:2.99:Can't Re-Enablig Ha After Migration From Virtual Center 2.0 To Viretual Center 2.5 8f
So were you able to ping the host before you made changes to pingable gateway IP? I'm glad its working for you.If you found this information useful, please consider awarding points for "Correct" or "Helpful". Thanks!!!
Regards,
Stefan Nguyen
iGeek Systems Inc.
VMware, Citrix, Microsoft Consultant
-
RELEVANCY SCORE 2.98
DB:2.98:Failed To Install Virtual Center Agent cs
Hi,
This weekend during the backup one of our ESX servers got disconnected in Virtual Center, leaving the message "Issue detected on host.net.local in Datacenter. Virtual machine creation may fail because agent is unable
to retreive vm creation options from host"
I tried restarting the hosts management agents and reconnect it but that didn't work out.
Anyone any idea what's going on?
Regards,
Joris
DB:2.98:Failed To Install Virtual Center Agent cs
Hi Andre, this was concerning a 3.5i host, so i restarted the hostd and vpxa services using the Console option but nothing happend.
I restarted the management services, after that reconnected and a login screen appeared (when adding a ESX host). I re-entered the root credentials and the host got connected. Strangely enough Virtual Center 'forgot' the proper credentials i guess...
Thanks for the help.
-
RELEVANCY SCORE 2.97
DB:2.97:Fail To Install Virtual Center Agent Service After Upgrade zc
Hi,I ran an upgrade of the virtual center from V2.0 to 2.01 for my ESX host which has been upgraded to V3.01 (as I want to run the 64 bits). The upgrade went through successfully but my ESX hosts were disconnected. When I tried to reconnect I got erros message that "fail to install virtual center agent service".
I browse through the forum and someone suggested to run the install of the agent manually by doing the folowing:
To run the vpx-upgrade-esx-3-linux-xxxxx (esx version) manually on the server from the Console.
These are located in the VirtualCenter install folder.
\VMware\VMware VirtualCenter 2.0\upgrade
But when I look into that folder, there are a number of vpx-upgrade files namiong from vpx-upgrade-esx1-linux..to vpx-upgrade-esx-4-linux... Which one should I run. Should I just use the vpx-upgrade-esx-3-linux-32042?? Also where (which directory) should I run it from after logon to the Service Console?? I am not a heavy linux user.
Thanks.
DB:2.97:Fail To Install Virtual Center Agent Service After Upgrade zc
Most of the HA errors I have come accross were DNS errors. The rest of them I usually had to fix by putting the hosts into a new Cluster. -
RELEVANCY SCORE 2.97
DB:2.97:Cant Add Hyper-V Host To Scvmm 2012 19
When I try to add a hyper-v host to system center, I get the error:
Error (421)
Agent installation failed on hyper-v because of a WS-Management configuration error.Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server hyper-v. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote Management
(WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.When I install the agent manually on the hyper-v host (vmmagent.msi), I get the error:
Error (413)
The files needed to install agent, version , are missing from the Virtual Machine Manager server VMC.Recommended Action
Reinstall the missing files by running Virtual Machine Manager Server Setup.-------------------
Steps that I have taken to troubleshoot this issue:To check integrity of or repair your host WMI repository,
run winmgmt /salvagerepository.
To check your WMI virtualization store,
start
wbemtest by using a local admin account of the host machine and connect to \\host\root\virtualization Try query select * from msvm_ComputerSystem and see if it succeeds.To check your host's WMI namespace security settings,
Go to Server Manager, click on Configuration then right-click on WMI Control and choose Properties
Click on Security tab, choose SCVMM and check its Security Settings.Make sure that both Administrators group and Virtual Machine Manager Servers group have the full rights on the namespace.
To check your WnRM state,
run winrm qc.
To check if the WinRM listener is running,
run winrm enum winrm/config/listener, or
run winrm get winrm/config to get the entire WinRM config.To check if your VMM agent is responding to winrm calls,
run winrm invoke GetVersion wmi/root/scvmm/AgentManagement -r:http://host@{}.
To manually restart VMM server service:
run net stop vmmservice, and run net start vmmservice.
To manually restart VMM host agent service:
run net stop vmmagent, and run net start vmmagent.
To manually restart Hyper-V service:
run net stop vmms, and run net start vmms.
The only test that has failed is the winrm AgentManagement query. I can connect to wmi/root/scvmm, but AgentManagement does not exist. Does anyone have any ideas? (All other tests passed OK - same result - can't install agent or add hyper-v host)
DB:2.97:Cant Add Hyper-V Host To Scvmm 2012 19
Hi,
This forum is for System Center Essentials(SCE) related issues. For questions about System Center Virtual Machine Manager(SCVMM), please use the following Forums, which would be the best resource in your scenario.
System Center Virtual Machine Manager Forums
http://social.technet.microsoft.com/Forums/en-US/category/virtualmachinemanager
Thanks,Yog Li -- Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
RELEVANCY SCORE 2.97
DB:2.97:Virtual Center Having Issues 93
I have installed VC 1.3 and I can't add my host because of this belowError is: Connection Failed for 192.168.1.111: Failed to install/upgrade VMware Virtual Center Agent?
What could it be? thanks
DB:2.97:Virtual Center Having Issues 93
We had this problem and rebooting the VC server cleared it up. -
RELEVANCY SCORE 2.96
DB:2.96:Virtual Center 1.4:Newbie m1
Hello,I just downloaded a trial version of Virtualcenter and installed the virtualserver (all) on my desktop (winXP)
When I try to add a host (a Vmware-server Virtual machine) somewhere on our network ;he says he cannot contact the agent.
I know on the Vm an agent should be installed but I don't know how.
I installed the client and was able to connect from the VM to my virtual center server.
So my question is : how can I install an agent on my VM-host so I can monitor it and add it into my virtual center server ?
Thank you,
Johan
DB:2.96:Virtual Center 1.4:Newbie m1
You need at least one HOST too!VC is only a management console
-
RELEVANCY SCORE 2.96
DB:2.96:Agent Update Problems After Cu Implemented. mk
Greetings.
Recently I updgraded SCVMM 2012 to CU2, I got no problems updating agents from our console, but in our main production server, the agent won't update.
After several tries from the console, getting an unknown error, even trying to install it locally from the DVD or the .msi I deleted the machine from the console, and so, the old agent, since one VM got the same problem and after deleting it, it was added
correctly.
From then on I'm trying to keep installing it, getting over and over and in any way (console, locally...) the next problem over AgentInstall log:CAQuietExec: Microsoft (R) MOF Compiler Version 6.1.7600.16385
CAQuietExec: Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
CAQuietExec: Parsing MOF file: C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\setup\VMMAgent.mof
CAQuietExec: MOF file has been successfully parsed
CAQuietExec: Storing data in the repository...
CAQuietExec: An error occurred while processing item 1 defined on lines 5 - 8 in file C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\setup\VMMAgent.mof:
CAQuietExec: Compiler returned error 0x80041006Error Number: 0x80041006, Facility: WMI
CAQuietExec: Description: Out of memory
CAQuietExec:
CAQuietExec: Error 0x8007006d: Failed to read from handle.
CAQuietExec: Error 0x80070003: Command line returned an error.
CAQuietExec: Error 0x80070003: CAQuietExec Failed
CustomAction MofcompCarmineAgentMof returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 12:06:48: InstallFinalize. Return value 3.I reviewed the next problems as far as I know:
-It was possible to the server that wasn't doing the install correctly since the host machine didn't have more than 50-100MB free RAM, still after stopping a VM and freeing more than 2GB, the install keep failing.-WMI /verify from CMD didn't throw any errors, all is working OK.
-It could be a WMI service problem, even so, we had to reboot this machines a few days ago, (update was done a week ago) so the service was restarted, still getting the error.
Any trobuleshoot I could do in this machine in order to install the agent, if possible with the less impact (reboot) possible?
Regards
Carlos
DB:2.96:Agent Update Problems After Cu Implemented. mk
We tried to restart the WMI service, which left us without Hyper-V control in the host machine, and not allowing us to restart the service.
It was solved, we had a criticaly problem which made us reboot the host machine.
After the reboot, there was no problem installing SCVMM Agent.Thanks for your reply.
-
RELEVANCY SCORE 2.96
DB:2.96:Failed To Add Esx2.5.3 Host To Vc2 dc
Hiim trying to add two esx 2.5.3 hosts to my VC2 inventory...
first i was getting the "Failed to install the Virtual Center agent service" while trying to connect to the hosts from VC, then i installed the vpx-upgrade-esx-5-linux-27704 on both hosts manualy.
one of the got connected, the other still shows the same error message, i already rebooted after aplying the update, but its not letting me connect to the host from vc
id appreciate little help on this
thank you.
DB:2.96:Failed To Add Esx2.5.3 Host To Vc2 dc
There is a setting on the VC2 server that you must clear for 2.5.x servers to register correctly. I think it is availabe from the Menu bar and has something to do with unchecking the option "Do not change the host licensing option" or something close to that. I'm working from memory as I am not at work but I had a similar problem. -
RELEVANCY SCORE 2.95
DB:2.95:Tried To Install Vmm 2012 Sp1 Beta Agent On Hyper-V 2008 Host Failed To Configure Ws-Management Service Error 97
I got following error when tried to install VMM 2012 SP1 Beta agent on Hyper V 2008 R2 host - multiple hosts. It works fine on Hyper V 2012 and Windows Server 2012. If i try to install the AGENT from VMM 2012 it works just fine. Only VMM 2012 SP1 beta agent
makes that problem. So its not winrm problem at all.Microsoft System Center Virtual Machine Manager Agent (x64) -- Failed to configure the WS-Management service. In the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote Management
(WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.DB:2.95:Tried To Install Vmm 2012 Sp1 Beta Agent On Hyper-V 2008 Host Failed To Configure Ws-Management Service Error 97
Again i have tried updating through VMM
------------------
Error (421)
Agent installation failed on HOUHYV03 because of a WS-Management configuration error.
Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server hostname122. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote Management
(WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.
--------------
Winrm is running on Port 5985. The configuration of WINRM is the same as on the machine where VMM 2012 agentinstalls. This seems to be issue with VMM 2012 SP1 Beta agent only. No issue win WINRM
here
winrm enumerate winrm/config/listener
Listener
Address = *
Transport = HTTP
Port = 5985
Hostname
Enabled = true
URLPrefix = wsman
CertificateThumbprint
ListeningOn = 16.84.34.183, 16.84.35.236, 127.0.0.1, 169.254.7.4, 169.254.24
8.203, ::1, fe80::39d1:d96f:a60f:704%6, fe80::81b2:ea39:b2ec:f8cb%14, fe80::a460
:f822:98cf:f748%9, fe80::f88b:d1f:62f2:b585%137 -
RELEVANCY SCORE 2.94
DB:2.94:Issues With Adding Vmware Esxi 4.1 Host Into Virtual Center 4.1.0 - Hp Bl460c G7 px
Hi all,We got 2 x BL460c G7 into our HP C7000 enclosure recently. Installed VMWare ESXi 4.1 U1 (HP Version) but I am unable to add these hosts into our Virtual Center for management.
Errors: Cannot install vcenter agent service. Cannot upload agent
I've checked the HCL and HP BL460c G7 are on there and I've used the HP version of VMWare.
Question: I was wondering whether there are any users out there would experienced similar issues and what they've done to overcome them.
HP BL460c iLO FW: v1.2
HP VC Flex10 FW: v3.18
HP OA FW: v3.21
VMWare ESXi 4.1 U1 348481
VMWare Virtual Center 4.1.0 Build 345043
**Note: I've also attached the hostd log. Please let me know if there are any other logs that might help with this....
Cheers,
Jeff
DB:2.94:Issues With Adding Vmware Esxi 4.1 Host Into Virtual Center 4.1.0 - Hp Bl460c G7 px
Cool, I'll check this out... -
RELEVANCY SCORE 2.94
DB:2.94:Can Not Install Agent fd
Hi,I the installation failed:The MOM Server could not execute WMI Query Select * from Win32_OperatingSystem on computer compuer.domain.com.
Operation: Agent Install
Install account: DOMAIN\admin
Error Code: 80041010
Error Description: IDispatch error #3600 I tried to install it manually, here the error:First Dialog:Product: System Center Operations Manager 2007 Agent -- Error 25218.Failed to uninstall SDK MOF. Error Code: -2147217407 (IDispatch error #3585).Second Dialog:Product: System Center Operations Manager 2007 Agent -- Error 25205.Failed to uninstall SDK MOF. Error Code: -2147217407 (IDispatch error #3585).
What can I do to deploy the agent?Regards.odoDB:2.94:Can Not Install Agent fd
Hi,Please refer to following KB:823775 Error Message: The Windows Management Instrumentation (WMI) Information Might Be Corruptedhttp://support.microsoft.com/default.aspx?scid=kb;EN-US;823775Also, maybe you need a clean reinstall if possible.HTH.
Jie-Feng Ren - MSFT
-
RELEVANCY SCORE 2.94
DB:2.94:System Center On Virtuozzo 4.0 3k
HI - Big problems.. System Center 2007 agent does not install on Virtual Private Server..
We need this resolving for a BIG implementaion. How can this be escalted?Thanks a lot!
ANdyDB:2.94:System Center On Virtuozzo 4.0 3k
Looks like serious if there is no known solution,
It is hard to add new driver to KSAL db -
RELEVANCY SCORE 2.94
DB:2.94:Failed To Install Virtual Center Agent Service md
When adding a host to virtual center, I receive the following status/error message, "Failed to Install the VirtualCenter Agent service. Then the host is grayed out in VirtualCenter with a red x and a disconnected note attached to the host name.Any ideas?
DB:2.94:Failed To Install Virtual Center Agent Service md
I got this error when I was connected to Virtual Center trying to add a host WHILE I also had a connection to the host in a separate Virtual Infrastructure window open at the same time.
There must be some sort of glitch with Virtual Center 3.5 when trying to add a host when you have connected two sessions to it (one it Virtual Center adding the host, and one connected via virtual infrastructure direct to the host)...
-
RELEVANCY SCORE 2.94
DB:2.94:System Center Virtual Machine Manager Agent (X64) -- Failed To Configure The Ws-Management Service fc
Trying to remote admin a clean hyper-v 2008R2 server, using many different methodsI'm receivingthe following errors:
----------------------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MsiInstaller
Event Category:None
Event ID:1013
Date:5/29/2010
Time:9:16:29 AM
User:NT AUTHORITY\SYSTEM
Computer:xxx.yyy.zzz
Description:
Product: System Center Virtual Machine Manager Agent (x64) -- Failed to configure the WS-Management service. Refer to the FAQ for more information.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 31 39 30 46 46 34 30 {190FF40
0008: 38 2d 30 32 43 30 2d 34 8-02C0-4
0010: 35 46 34 2d 39 30 39 39 5F4-9099
0018: 2d 41 36 45 30 32 42 36 -A6E02B6
0020: 39 36 45 38 31 7d 96E81}
----------------------------------------------------------------------------------------------------------------
Along with the previous I have also the following two:
----------------------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:Service Control Manager
Event Category:None
Event ID:7024
Date:5/29/2010
Time:10:01:55 AM
User:N/A
Computer:xxx.yyy.zzz
Description:
The VMInstallDetector service terminated with service-specific error %%-2146041854.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
----------------------------------------------------------------------------------------------------------------
and also
----------------------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:Service Control Manager
Event Category:None
Event ID:7024
Date:5/29/2010
Time:10:01:59 AM
User:N/A
Computer:xxx.yyy.zzz
Description:
The VMAgentInstaller service terminated with service-specific error %%-2146041851.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
-----------------------------------------------------------------------------------------------------------------
On the thread
http://social.technet.microsoft.com/Forums/en-US/virtualmachinemanager/thread/076a4ea9-e8f6-4f75-a92b-c498b955d0b0/
the advice to rollback/uninstall the update windows management framework core package. I can't do that.
Looking at this thread:
http://social.technet.microsoft.com/Forums/en-US/virtualmachingmgrhyperv/thread/06672549-7835-4c0a-80cc-b0540129dfe9
the advise is to get the log from:
%windir%\system32\msiexec.exe /i .\amd64\msi\agent\vmmagent.msi /l*v %temp%\VMMAgent_install.log /qb
Even that this suggestion didn't work because the vmmagent.msi is pushed by the remote host, I found the log files on the temp directory C:\Windows\Temp with names like:
5/27/2010 07:00 PM 160,896 vmmAgent.msi_5-27-2010_19-0-16.logThe abnormality on file is the failure to install CreateWsmanListener:
.....
1: CreateWsmanListener started
1: WSMAN listener created: wxf:ResourceCreated xmlns:wxf=http://schemas.xmlsoap.org/ws/2004/09/transfer xmlns:a=http://schemas.xmlsoap.org/ws/2004/08/addressing
xmlns:w=http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd xml:lang=en-USa:Addresshttp://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous/a:Addressa:ReferenceParametersw:ResourceURIhttp://schemas.microsoft.com/wbem/wsman/1/config/listener/w:ResourceURIw:SelectorSetw:Selector
Name=Address*/w:Selectorw:Selector Name=TransportHTTP/w:Selector/w:SelectorSet/a:ReferenceParameters/wxf:ResourceCreated1: WSMAN listener configuration started
MSI (s) (8C!48) [09:16:29:848]: PROPERTY CHANGE: Adding CAERROR property. Its value is '1'.
MSI (s) (8C:70) [09:16:29:848]: Note: 1: 1720 2: CreateWsmanListener 3: -2147221503 4: 5: 6: 88 7: 91: !VMM_Error! 2: 1
Info 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action CreateWsmanListener script error -2147221503, : Line 88,
Column 9,
MSI (s) (8C:48) [09:16:29:848]: Doing action: SetNonTrustedMachineFlagAndDirectory
Action ended 9:16:29: CreateWsmanListener. Return value 1.
MSI (s) (8C:48) [09:16:29:848]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SetNonTrustedMachineFlagAndDirectory'MSI (s) (8C:48) [09:16:29:848]: PROPERTY CHANGE: Adding ExportDmzFile property. Its value is '0|C:\Program Files\Microsoft System Center Virtual Machine Manager 2007\|SCVMM46910mHrUC|DXefzP#@75||0|0'.
Action start 9:16:29: SetNonTrustedMachineFlagAndDirectory.
.....(: fcm :)
DB:2.94:System Center Virtual Machine Manager Agent (X64) -- Failed To Configure The Ws-Management Service fc
I met the same issue. Followed by some others' advice. Fixed it just now.
from the command prompt run winrm quickconfig to configure the remote manangement service. Try the operation again. -
RELEVANCY SCORE 2.93
DB:2.93:P2v Problem With Windows Server 2000 sd
Hello all!I have a problem: I try to convert physical windows 2000 advanced server with sp4. I use SCVMM2008 installed on windows server 2008 x64.When I press Scan System, I have an error:
Agent installation failed on 10.13.5.1.
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
ID: 410
Details: Fatal error during installation (0x80070643)and on the physical server I see, that agents is installed, but cannot start with The Virtual Maschine Manager Agent service terminated with service-specific error 2147942421.please help!AntonDB:2.93:P2v Problem With Windows Server 2000 sd
Hello,I have exactly the same configuration and same problem.
Can you tell me if you solved the problem and if so, how.It is very important to me.
Thank you very much.
N.D -
RELEVANCY SCORE 2.93
DB:2.93:Unable To Add Esx Host To Virtual Center 202 c1
Hi,I am unable to add ESX 301 to VC 202, giving error: Failed to install the VirtualCenter Agent service.
Thanks,
Sri
DB:2.93:Unable To Add Esx Host To Virtual Center 202 c1
Thanks Richard, Now i am able add ESX server to VC. -
RELEVANCY SCORE 2.93
DB:2.93:Dpm 2007 Agent Error - Dpmra Service Terminated Wiht Service-Specific Error Element Not Found a1
Because the DPM 2007 agent install counld not find the production server, I manually installed a DPM 2007 agent (64bit edition) onmy Windows 2008 Standard (64bit) production server. The server is running Hyper-V. I was able to install
the agent manually, then rebooted the server. I tried to attch it to my DPM 2007 System Center Managment by going through the shell and running the attach-proudctionserver.ps1 command. When it failed I went to the production server and noticed
that the DPMRA agent service was had not started. I tried to start the service and got the following: Windows could not start the DPMRA on Local computer.
Looking at the System event viewer I see the following event error (event ID 7024) The DPMRA service terminated wiht service-specific error Element not found.
I searched for that error on the internet and only found suggestions to check the TCP ports 5718/5719 using the netstat command. I did that and found nothing using those two ports. I've also temporarily turned off my Windows firewall just to
see if anything was blocking that service from starting, butthe service still failed to start.
Any suggestions would begreatly appreciated.
Thanks,
TerryDB:2.93:Dpm 2007 Agent Error - Dpmra Service Terminated Wiht Service-Specific Error Element Not Found a1
Mike,
Thanks for yoru response. Just realized yesterday that I didn't install the service pack 1 update on DPM 2007. After installed, Hyper-V support was available, and I was able to install the agent from the DPM management console. No
errors!
Terry -
RELEVANCY SCORE 2.93
DB:2.93:Failed To Install Virtual Agent Service j7
I'm playing with a demo of VI and I'm trying to connect my existing ESXi server but it generates "Unable to install virtual infrastructure client"
What can I do to get it installed?
DB:2.93:Failed To Install Virtual Agent Service j7
Reinstalled ESXi server and it worked...
I wanted to try the boot off thumb drive anyway.
-
RELEVANCY SCORE 2.93
DB:2.93:Can't Install Vmware Converter Agent 8k
Hi,
I just want to convert a windows physical machine to virtual machine in VI3. But when I begin the installation of vmware converter agent failed. Is there anyone know why? If any special steps need to do, like open some kind of ports.....
Here is the log:
Install Agent on tnwiavsomc01
Connect to ADMIN$ on tnwiavsomc01 as tnwiavsomc01\lanl
SMB manager: Error connecting to share : 1203
Deployment on tnwiavsomc01 failed: Unspecified error in remote execution mechanism
Install of Agent failed on tnwiavsomc01
Install Agent failed: converter.fault.AgentDeploymentFault
AgentManagerProxy::InstallAgent: Agent deployment status: 4.
VimConnectionStore stopping keepalive
Scheduled timer canceled, StopKeepAlive succeeds
Thanks!
Lan
DB:2.93:Can't Install Vmware Converter Agent 8k
It turns out that the ports 139 and 445 don't be opened.Lan
-
RELEVANCY SCORE 2.93
DB:2.93:Error "Failed To Install Virtualcenter Agent" And It Will Not Connect The H c9
When I try to add a host to the Virtual Center I get the following error message "Failed to install VirtualCenter Agent". All my Licenses are fine I have 15 more to use and I am logging in as an Administrator.DB:2.93:Error "Failed To Install Virtualcenter Agent" And It Will Not Connect The H c9
You likely will need to install the virtual center agent service manually. See this thread:http://www.vmware.com/community/thread.jspa?threadID=48469start=0tstart=0
-
RELEVANCY SCORE 2.92
DB:2.92:Virtual Machine Manager Agent Install/Uninstall Problem zc
I have a Windows XP SP3 box that I am attempting an online Physical to Virtual (P2V) conversion on. However I am running into a couple of problems that I am unable to solve and was hopping someone maybe has encounter the same problem.
We recently upgraded to our the OS and System Center Virtual Machine Manager to Windows 2008 R2 Standard and System Center Virtual Machine Manager 2008 R2 Workgroup edition. As a side note Ive did 10-15 P2V conversions since the upgrade took place.
When attempting to uninstall the agent on the client I receive the following error message:
________________________________________
Failed to fully clean up the system. Ensure that the correct boot loader is installed and remove all files named $scvmm*.* from the root directory of the boot volume, and then try the operation again.
_____________________Ive checked to boot.ini and the configuration is normal.
Ive attempted to manually remove the agent from the client but am unsure if I am removing everything correctly (cant find any documents on manually removing the agent).During the system scan I receive the following error message:
______________
Computername has an unsupported version of the Virtual Machine Manager agent installed.Uninstall the Virtual Machine Manager agent using Add or Remove Programs on Computername and then try the operation again. ID:408
_________________When I attempt the uninstall on the client I again receive the same message as above.
8-13-2010
When attempting to install the agent locally, almost instantly I receive the following error:
Virtual Machine Manager Agent is not supported on this operating system. For more information, see 'Supported Operating Systems for VMM' in Virtual machine Manger setup help.Also recently the machine was imaged / cloned.
DB:2.92:Virtual Machine Manager Agent Install/Uninstall Problem zc
Hi, I m having the same error while removing the Virtual Machine Manger P2V agent from my source machine. please help me out. My source machine details are: Windows server 2000 with SP4 IIS is running on that server best regards, Nouman
-
RELEVANCY SCORE 2.92
DB:2.92:The Agent Management Operation Agent Install Failed For Remote Computer Xxxxxxx j1
Hello,
I have installed System Center R2 Operation Manager Evaluation on a Windows Server 2012 R2 server.
I did a complete installation to test System Center if it would fit our needs and therefore tried to add one Windows Server 2012 R2 server (clean install, no extra roles) by using the Agent Management Task.
Now when I select a server and choose to install the agent on the server I receive the following message:
The Agent Management Operation Agent Install failed for remote computer ADFS03.xxxxxxxxxxxx.Install account: INTRANET\scop_msaaError
Code: 80070644
Error Description: Installation suspended, incomplete.
Microsoft Installer Error Description:
For more information, see Windows Installer log file D:\Program Files\Microsoft System Center 2012 R2\Operations Manager\Server\AgentManagement\AgentLogs\ADFS03AgentInstall.LOGD:\Program Files\Microsoft System Center 2012 R2\Operations Manager\Server\AgentManagement\AgentLogs\ADFS03MOMAgentMgmt.log on the Management Server.
--
The user scop_msaa is the Management Server Agent Account and is a member of Domain admins for INTRANET. I have checked the logs and got:
MSI (s) (F0:58) [12:27:01:103]: Windows Installer installed the product. Product Name: Microsoft Monitoring Agent. Product Version: 7.1.10184.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status: 1604.
Also in Operation Manager I can see it was a success adding the server.I can see the server in 'Administration - Pending Management' as filtered 'Type: Failed Agent Installation'. Now I have rightclicked server and selected 'Install Agent' and received a Success this time. I did choose for 'Use Management Server Agent Account'
and for 'Local User/Service' (cannot remember). What is the difference between these two and how can I make sure I get success on first try?Thanks!
DB:2.92:The Agent Management Operation Agent Install Failed For Remote Computer Xxxxxxx j1
Hi,
If you are installing agent using the Discovery Wizard, I would like to suggest you go through the below link and follow the steps in it:
Install Agent on Windows Using the Discovery Wizard
http://technet.microsoft.com/en-us/library/hh230731.aspx
It is not recommend to put scom action account as a domain administrator but agent installation requires an account which has local admin right.Regards, Yan Li -
RELEVANCY SCORE 2.92
DB:2.92:Scvmm 2008 R2 P2v Conversion Fails Error: 410 sc
Hello.
I’m having trouble with a P2V conversion. The wizard will not complete the Scan phase. The following error occurs:
Agent installation failed on servername.
“Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
ID: 410
Details: Fatal error during installation (0x80070643)”
I see no Event Log entries on the SCVMM server. On the target physical machine the System log shows that Event 7045 first the VMMInstallDetector, then the VMMAgentInstaller, were both installed. But they were both followed by the following Event 7024:
“The VMMInstallDetector service terminated with service-specific error %%-2146041853.”
“The VMMAgentInstaller service terminated with service-specific error %%-2147023293.”
The Application log shows mvvp2vsource.msi being installed, and logs the following failure events:
“Event 11708
Product: Microsoft System Center Virtual Machine Manager P2V Agent (x64) -- Installation failed.”
“Event 1033
Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager P2V Agent (x64). Product Version: 2.0.4271.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.”
I tried copying vmmp2vsource.msi to the target and installing it manually, and it installs just fine. The target is a domain member, the SCVMM machine is a member of the local administrators group, and it doesn’t seem to be a permissions problem.
Target is Windows Server 2008 R2 Standard SP1, fully patched up to date as of today. SCVMM is version 2008 R2. Windows Firewall and Kaspersky AV are disabled. I checked msiexec.exe on the target server and the Details tab shows the file version is 5.0.7601.17514.
Any ideas how to make it work? Maybe turn on some kind of extended logging with SCVMM to troubleshoot?
Thanks!
DanDan
DB:2.92:Scvmm 2008 R2 P2v Conversion Fails Error: 410 sc
I ran the disk2vhd conversion tool on the individual drives, thencreated a new VM using those drives. It worked perfectly.Dan
-
RELEVANCY SCORE 2.91
DB:2.91:Install Vmm2012 Agent On A Host Locally, Finish But Nothing Happen kc
Firstly I want to use VMM2012 console to add a host into VMM Server, but get failed with error message
--------------------------cut begin-----------------
Error (410)
Agent installation failed on Host01.Domain01.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.
-------------------------cut end--------------------Then I turn to install VMM2012 agent on the hostlocally.
Installation finish, but nothing happen.
Please check VMMLogs below.
C:\programdata\VMMLogs\AgentSetup.log
-----------------------log cut begin-------------------
...............
MSI (s) (B8!2C) [00:29:56:340]: PROPERTY CHANGE: Adding COMPUTERNAME property. Its value is 'Host01.Domain01.com'.
CustomAction CreateSSLCertificate returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 0:29:58: CreateSSLCertificate. Return value 3.
................
=== Logging stopped: 2/29/2012 0:30:01 ===
MSI (c) (38:D4) [00:30:01:352]: Note: 1: 1708
MSI (c) (38:D4) [00:30:01:352]: Product: Microsoft System Center Virtual Machine Manager Agent (x64) -- Installation failed.
MSI (c) (38:D4) [00:30:01:352]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.0.6005.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
MSI (c) (38:D4) [00:30:01:368]: Grabbed execution mutex.
MSI (c) (38:D4) [00:30:01:368]: Cleaning up uninstalled install packages, if any exist
MSI (c) (38:D4) [00:30:01:368]: MainEngineThread is returning 1603
--------------------------log cut end-----------------------------Anyone know why customaction CreateSSLCertificate get fatal error 1603?
Any help will be appreciated.Thanks,
DylanDB:2.91:Install Vmm2012 Agent On A Host Locally, Finish But Nothing Happen kc
Thanks for reporting the bug.This issue pertains to creation of SSL certificates by the System Center 2012 VMM server for a variety
of tasks such as installation, adding a host, adding a library and deploying services. We understand the issue and are investigating further. This issue is related to the leap year date of 2/29 and will not impact operations hereafter.DeWitt
-
RELEVANCY SCORE 2.91
DB:2.91:Virtual Center 2.0.X Installation Failed kp
Hi,Virtual center installation was failing when i tried to install on windows 2003 enterprise OS with SQL server 2000 database.
Can anyone help me how to get rid of this error.
(failed to create virtual center repository).
Please see the attached screenshot for the same.
Thanks..........
DB:2.91:Virtual Center 2.0.X Installation Failed kp
Could you post the log file that is mentioned in the error. A few similar threads.http://communities.vmware.com/message/472055#472055
http://communities.vmware.com/message/512116#512116
http://communities.vmware.com/message/835705#835705
-
RELEVANCY SCORE 2.91
DB:2.91:Vmm Agent Install Fails On Windows Server 2012 R2 Hyper-V 93
Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 servereither from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
ThanksKumaresan Lakshmanan
DB:2.91:Vmm Agent Install Fails On Windows Server 2012 R2 Hyper-V 93
Hi,
We are unable to install VMM 2012 R2 agent on Windows Server 2012 R2 servereither from VMM console or manually on the hyper-v server.
Error on VMM Console:
Error (410)
Agent installation failed on chsicoecdh03.casper.com.
Fatal error during installation (0x80070643)
Recommended Action
Try the operation again. If the problem persists, install the agent locally and then add the managed computer.==================================================================
Error on Hyper-v server:
MSI (c) (E8:D0) [16:53:24:726]: Windows Installer installed the product. Product Name: Microsoft System Center Virtual Machine Manager Agent (x64). Product Version: 3.2.7510.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success
or error status: 1603.
Also, I suspect may be issue with WMI then checked WMI repository and it is in consistent state. winmgmt /verifyrepository.
Please help on this issue.
Any help would be appreciated.
ThanksKumaresan Lakshmanan
-
RELEVANCY SCORE 2.91
DB:2.91:Installing Vmm Agent Ends Prematurely zf
Hi
I am new to SCVMM.
We are using SCVMM 2012.
I tried to install scvmm 2012 agent on DMZ windows server 2008 R2 locally.
But at the end of the installation, I got an error as below. But WinRM service is in started status. I tried by restaring this service also. But I got the same error.Event Error:
Log Name: Application
Source: MsiInstaller
Date: 5/6/2013 1:46:43 AM
Event ID: 1013
Task Category: None
Level: Error
Description:
Product: Microsoft System Center Virtual Machine Manager Agent (x64) -- Failed to configure the WS-Management service. In the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote
Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRMAravind
DB:2.91:Installing Vmm Agent Ends Prematurely zf
Please check
http://blogs.technet.com/b/scvmm/archive/2011/09/23/vmm-2012-rc-understanding-the-hyper-v-host-addition-operation-if-window-remote-management-winrm-is-configured-using-group-policy-gpo-settings.aspxCould you check the whole configuration
by running command winrm get winrm/config and check the listener by command winrm e winrm/config/listener?
Also try to run winrm quickconfigMohamed Fawzi | http://fawzi.wordpress.com
-
RELEVANCY SCORE 2.90
DB:2.90:Virtual Center Service Terminates Unexpectedly... 19
I'm running ESX 3.0.1. I currently have a license for virtual center and have installed it successfully. We're going through an IP renumbering project and when I changed the IP address of my virtual center host and restarted it all my vm's were in a disconnected state.I've decided to install another virtual center on a host in the new IP subnet. Since we only have one virtual center license I cut and paste the VC license into my server based license file on the new host (another project is a migration of exisiting vm's to new ESX hosts in the new subnet), which is also a new license server.
The license server installs and the service starts ok. When I then attempt to install virtual center it installs ok, but the service terminates right away. The event log states that the virtual center service failed to initialize.
My question - Why is virtual center service terminating?
Thanks
DB:2.90:Virtual Center Service Terminates Unexpectedly... 19
thanks are welcome. Points are much better.Please assign points for helpful answers.
See you on VMTN
-
RELEVANCY SCORE 2.90
DB:2.90:Visual Studio Lab Center - Settring Up Win 8 Test Client j1
Hi Folks,
I'm using Visual Studio 2012 Ultimate to set up a windows 8 virtual machine for running some coded UI tests.
My setup involves Server 2012 running hyper-v connected to a domain (domain X). On this server I am running two virtual machines - one running a domain controller (domain Y)and the other running windows 8 (connected to domain Y). Both machines
can access the host (and internet)and I can remote into them from the host using remote desktop or via the hyper-v client.
I have installed the test agent software on the Windows 8 machine and I am using Lab center to set up the Win 8 client. I have installed the test controller on the hyper-v host and it is connected to a TFS Project.
At the end of the process setting up a new test clientI get an error message TF259098 Team Foundation Server could not perform the following operation because of one or more errors....
Microsoft Test Manager could not complete the following action: Validating the user name and password for coded UI tests. TF260948: The user name or password provided to configure the test agent to run as a process is not valid.
The issue I have is that for the account required for running UI tests, lab center will only let me enter a username that is a member of domain X, however, the test agent is set up to use a domain Y account (as the Win 8 machine is not a member of domain
X).
If I try and enter the correct account, on the verification screen I get a 'failed - verify that the machines are accessible using the username and password provided' - they are because this is what I use to remote into the machine.
If I uncheck the 'configure for environment to run UI tests' it appears to complete the setup successfully. Although I get a warning TF259641: To use the environment, you must install a compatible test agent. If I click 'install agent'
it whirs away, finishes but the warning remains.
I have looked at configuring a service account on the Team Foundation Server, but under 'team product collections, lab management' I only have the Configure library Shares and Configure Host Groups which are configured (the service account option is
not visible - if it is still used in TFS2012).
The status of the VM in lab center is shown as 'Not Ready' and I cannot connect to it.
I can replicate the issue on a Windows 7 client, however, I can connect it using Lab Center.Regards
AndyDB:2.90:Visual Studio Lab Center - Settring Up Win 8 Test Client j1
For those who still are looking for an answer, here is my solution. All these steps were executed on the test controller / test manager machine (which is the same machine in my case) :1 - I'm not sure if this is related to my problem but this was something I did before the following steps. At some point I've tried to install the VS Agents separately to the test agent machine. It didn't help to solve my problem but I could see to which machine
it was being registered. After executing one of the following steps (I can't remember which one) I saw it being registered to a machine name which was on the test controller's hosts file pointing to 127.0.0.1. I've deleted those records from the hosts file.
Now the localhost is pointing to 127.0.0.1 and after completing these steps the test agent is being registered to the test controller with the right machine name.
2- Since I have two network adapters on the test controller/manager machine, I've added the bind to key to the QTControllerConfig.xml file according to this articlehttp://support.microsoft.com/kb/944496/en-us
I didn't add it to theQTAgentService.exe.config on the Test Agent and to theQTAgent.exe.config on Test Controller.
(I don't believe that this step was necessary but it's worth mentioning)
3 - On the test controller, I've deleted the cache in this directory : C:\Users\username\AppData\Local\Microsoft\Team Foundation\4.0\CacheThis step does not solve the issue by itself.
4 - I've deleted the record about a former environment from the file QTControllerConfig.xml which is located at C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE.
After these steps I could finally install the test agent to my virtual machine from the test manager.
-
RELEVANCY SCORE 2.90
DB:2.90:Registration Causes Virtual Center To Crash? 9m
Yesterday afternoon I scp'd a virtual machine from one ESX farm to another. Once the copy was completed I registed the VM (through datastore browser) and immediately experienced a Virtual Center crash - error message was "Connection to the server has been lost.The application will now exit". Our Virtual Center server is a Dell PE2850 running VC2.02 v.50618 with a SQL 2K5 database running locally. The error in the VC log was:
Win32SEHTranslator: Access Violation (0xc0000005) ebp: 0x358ed24, eip: 0x573a5b
exception: Assert failed!
Backtrace:(backtraces not supported)
CoreDump: Writing minidump
Restarting the VC service and rebooting the VC server resulted in the error "Connection refused". I disabled the VC servers network connection and was able to start the Virtual Center application. The application started with all ESX (version 3.02 52542) servers disconnected naturally, so I enabled the VC server's network connection and started connecting the ESX servers one at a time until I found the offending server. It was the server I had just attempted to register the virtual machine I had just copied over. I restarted the VC agent on that ESX server, but had the same result - once I tried to reconnect the ESX server to Virtual Center, the VC service would crash and I would have to restart the VC service. I then un-registered the virtual machine in question and Virtual Center would start normally with all ESX servers connected. Once I registered the virtual machine (by vmware-cmd this time) it crashes VC immediately. Has anyone seen this issue? It appears to me that the issue is on the ESX side when it tries to send data to VC at Virtual Center start-up. Fortunately this occured in our Test environment and I was able to spend some time on it. Unfortunately, I had this exact issue on our Production environment (ESX 3.01/VC 2.01on SQL) two months ago and opened a SR, only to be told by VMware that it was a corrupt VC database and to re-install/re-initialize VC. Having experienced this issue twice in the last couple of months, I was wondering if other folks have had issues with registering vm's or issues with Virtual Center crashing as a result of trying to register a vm. Also, any info where I could find any extended error information from the ESX server side.
DB:2.90:Registration Causes Virtual Center To Crash? 9m
My advice is to unregister (which you've undoubtedly done by now to keep VC running). Move the vmx file to a backup name or location. Create a new VM based on the disk files.
I think this crash happens when the config file is wonky. I had the same error and VMware support thrashed about for over 24 hours while my VC wouldn't run. I gave up on them and read the logs, found the assert, traced it in the db to the offending system and unregistered it in 10 minutes the next morning.
-
RELEVANCY SCORE 2.90
DB:2.90:Cant Add Hyper-V Host To Scvmm 2012 Problem With Agent 3d
When I try to add a hyper-v host to system center, I get the error:
Error (421)
Agent installation failed on hyper-v because of a WS-Management configuration error.Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server hyper-v. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote Management
(WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.When I install the agent manually on the hyper-v host (vmmagent.msi), I get the error:
Error (413)
The files needed to install agent, version , are missing from the Virtual Machine Manager server VMC.Recommended Action
Reinstall the missing files by running Virtual Machine Manager Server Setup.-------------------
Steps that I have taken to troubleshoot this issue:To check integrity of or repair your host WMI repository,
run winmgmt /salvagerepository.
To check your WMI virtualization store,
start
wbemtest by using a local admin account of the host machine and connect to \\host\root\virtualization Try query select * from msvm_ComputerSystem and see if it succeeds.To check your host's WMI namespace security settings,
Go to Server Manager, click on Configuration then right-click on WMI Control and choose Properties
Click on Security tab, choose SCVMM and check its Security Settings.Make sure that both Administrators group and Virtual Machine Manager Servers group have the full rights on the namespace.
To check your WnRM state,
run winrm qc.
To check if the WinRM listener is running,
run winrm enum winrm/config/listener, or
run winrm get winrm/config to get the entire WinRM config.To check if your VMM agent is responding to winrm calls,
run winrm invoke GetVersion wmi/root/scvmm/AgentManagement -r:http://host@{}.
To manually restart VMM server service:
run net stop vmmservice, and run net start vmmservice.
To manually restart VMM host agent service:
run net stop vmmagent, and run net start vmmagent.
To manually restart Hyper-V service:
run net stop vmms, and run net start vmms.
The only test that has failed is the winrm AgentManagement query. I can connect to wmi/root/scvmm, but AgentManagement does not exist. Does anyone have any ideas? (All other tests passed OK - same result - can't install agent or add hyper-v host)
DB:2.90:Cant Add Hyper-V Host To Scvmm 2012 Problem With Agent 3d
aioli_LaCiotat you are a life saver. You're instructions worked perfectly for me. Thank you! -
RELEVANCY SCORE 2.89
DB:2.89:Adding Virtual Server 20205 To Vmm 2008 x7
After install VMM 2008 I am able to add Hyper-V servers just fine to the VMM console. All the virtual servers show up and I'm quite excited with the interface and what I can do. The problem I am having is when adding virtual Server 2005 servers to the interface. When I add a VS 2005 R2 SP1 (1.1.603.0 EE R2 SP1) server to the VMM interface it shows up for a few seconds, register 0% and then disapear.
In the event log of the VS 2005 server I get the following error:
Product: System Center Virtual Machine Manager Agent -- Failed to configure the WS-Management service. Refer to the FAQ for more information.
In the system log I get the following errors:
The VMInstallDetector service terminated with service-specific error 2148925441 (0x80160001)
and
The VMAgentInstaller service terminated with service-specific error 2148925446 (0x80160006).
Paul BrockDB:2.89:Adding Virtual Server 20205 To Vmm 2008 x7
The problem was I didn't have the newer version of WinRM: http://www.microsoft.com/downloads/details.aspx?FamilyID=845289ca-16cc-4c73-8934-dd46b5ed1d33DisplayLang=en
Solved, Thanks! -
RELEVANCY SCORE 2.89
DB:2.89:Unable To Add Gsx Host? k9
Running GSX 3.2 on Windows 2003, I am unable to add host using Virtual Center client. I receive the error message unable to install/upgrade VMware Virtual center agent.Can any one point me to documentation that will help me resolve this issue?
DB:2.89:Unable To Add Gsx Host? k9
I would suggest posting this issue in the Virtual Center forum; the error you describe is a Virtual Center error, not a GSX error. You're more likely to get your question answered in the other forum.Good luck.
-
RELEVANCY SCORE 2.89
DB:2.89:Error 2912 Adding Windows 2008 X64 R2 Server To Vmm sf
I have a VMM Host machine which is a Windows 2008 x64 SP1. I'm attempting to add a host which is running Windows 2008 x64 R2. When the job runs to install the VMM Agent I'm receiving the following error:
Error (2912)
An internal error has occurred trying to contact an agent on the vhmipor05.manatron.com server.
(The remote procedure call failed (0x800706BE))Recommended Action
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.The agent and WS-Management Service seem to be installed and running, however the Host shows as Needing Attention in VMM and that status shows Connection Status of Not Responding.
On the host (R2) the Event log is showing errors every 2 minutes with the VMM Agent as follows:Faulting application name: vmmAgent.exe, version: 2.0.3444.0, time stamp: 0x48e73893
Faulting module name: MSVCP80.dll, version: 8.0.50727.4927, time stamp: 0x4a27431a
Exception code: 0xc0000005
Fault offset: 0x000000000002ba5c
Faulting process id: 0xf1c
Faulting application start time: 0x01ca3bb60ba393d2
Faulting application path: C:\Program Files\Microsoft System Center Virtual Machine Manager 2008\bin\vmmAgent.exe
Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4927_none_88dce9872fb18caf\MSVCP80.dll
Report Id: 6101b1c4-a7a9-11de-98f5-001517a061bfANY Ideas please?THANKS -
RELEVANCY SCORE 2.89
DB:2.89:P2v - Virtualizacao De Host Fsico 8z
Boa dia!Fiz um curso de virtualizacao. Já estudei sobre o assunto e estou as voltas com um problema que está tirando o meu sono.Preciso migrar um servidor (host físico) para uma máquina virtual Microsoft Virtual Server 2005 SP1 . Já usei o VMconverter e depois VMDK to VHD da empresa Xcarab e ainda sim estou com problemas.Usei o System Center e o mesmo está me dando erro ao instalar o Agent na máquina que desejo virtualizar. Aparece a seguinte msg de erro:- Service 'Virtual Machine Manager Agent'(VMMAgent)failed to start. Verify that you have sufficient privileges to start system services.Eu to logado na máquina como administrador.Já tentei de tudo e nao sei mais o q fazer.Desde já eu agradeco a atencao e a orientacao caso tenha alguma solucao para o meu problema.Atenciosamente;Rodney.
DB:2.89:P2v - Virtualizacao De Host Fsico 8z
Olá Amigo.
O que nosso Amigo Nelson disse é verdade ele me fez relenbrar alguns procedimentos que eram necessários.
segue o link para download do WINRM.
http://www.microsoft.com/downloads/details.aspx?familyid=845289ca-16cc-4c73-8934-dd46b5ed1d33displaylang=en
configurar o mesmo:
abra o prompt de comando e digite , winrm quickconfig. irá apresentar uma tela parecido com essa
WinRM não está configurado para permitir remoto acessar para esta máquina para seguinte management.The devem ser feitas alterações: Defina o tipo de serviço WinRM como iniciar automaticamente atrasada.Inicie o serviço WinRM.Criar um ouvinte WinRM em HTTP://* para aceitar solicitações WS-Man para qualquer IP sobre issomáquina. fazer essas alterações [y / n]? y
precione o y em seguida precione enter
Abraços -
RELEVANCY SCORE 2.88
DB:2.88:Virtual Center Patch Applied Esx Hosts Errors m3
We installed virtual center patch for vi 2.0.1.40644. Install went very smooth. However the ESX hosts are receiving the following errors: Failed to install the virtual center client agent service and Unable to contact a primary HA Agent in cluster Any ideasDB:2.88:Virtual Center Patch Applied Esx Hosts Errors m3
It has been seen that simply restarting the hostd process can cause the upgrade to happen without the need to manually do it. -
RELEVANCY SCORE 2.88
DB:2.88:System Center 2012 Vmm, Cant Add A Virtual Machine Host a9
This is being on a Win 2008r2 host, running as DC (hyperV enabled). On attempts to add the HOST this process fails on setp 1.2 [Install Virtual Machine Manager Agent] with the below error.
The agent SCVMMService services are running.
Error (2912)
An internal error has occurred trying to contact an agent on the WinServ.ServDomain.com server: NO_PARAM: NO_PARAM. Cannot perform this operation on built-in accounts (0x8007055B)
Recommended Action
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.yupDB:2.88:System Center 2012 Vmm, Cant Add A Virtual Machine Host a9
Please check that thread
http://social.technet.microsoft.com/Forums/en-US/virtualmachingmgrhyperv/thread/ede6687d-9e8c-4496-9ded-e87102b0c994Mohamed Fawzi | http://fawzi.wordpress.com -
RELEVANCY SCORE 2.87
DB:2.87:Scom 2012 - Monitoring Red Hat Enterprise 5.8 - Unsupported ss
I am trying to monitor some of our Red Hat VM's in SCOM 2012 but running intoa problem, after i run discovery i get the following error-
Message :
No installable UNIX/Linux agent is available
Details:
Failed to find a matching agent kit to installI did some google searches, and it said i should see an agent in -
C:\Program Files\System Center 2012\Operations Manager\Server\AgentManagement\UnixAgents\DownloadedKits , but all i have in there is GetOSVersion.sh and nothing else, i have tried to re-import the management packs but to no avail.There is no .rpm files in C:\Program Files\System Center 2012\Operations Manager\Server\Health Service State\Resources\ either, which is another thing i found to look for....
Can i manually download the agent and place it in the DownloadedKits directory? Or any other suggestions?
Thanks
PeteDB:2.87:Scom 2012 - Monitoring Red Hat Enterprise 5.8 - Unsupported ss
No i hadn't realised i had to import them from there!
Got them in and now able to manage the RH boxes, thanks so much
-
RELEVANCY SCORE 2.86
DB:2.86:Smc 4.0 Db-Start Failed m7
Dear All ,
I try install smc 4.0 on another sun box ,the reason for test CCR problem from on t2000 box ,I use same file which use for install smc on t2000 , but on step es-setup i got the problem (db-start failed).Here the log installation :
Initiating setup for Sun Management Center Agent Component.
This part of the setup process does the Sun Management Center Agent Component setup.
Started /opt/SUNWsymon/lib/sbin/sm_setup_agent.sh at Thu Nov 8 20:16:52 BNT 2007.
Running on SunOS sun240 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-V240.
Copying snmpd.conf file into /var/opt/SUNWsymon/cfgServer component also installed locally.
Using this machine as the Sun Management Center server.---------------------------- WARNING ---------------------------
It appears that agent.snmpPort 161 is already in use.
Sun Management Center 4.0 agent may not be able to run due to this conflict.
There are two ways to correct this conflict:
1. Reconfigure the port that Sun Management Center 4.0 uses.
2. Stop the process that is using the port.
Press RETURN to force default port.
Enter port you would like to use [ 1100 to 65535 ]: 1161
Updating /var/opt/SUNWsymon/cfg/domain-config.x with new port number.Generating agent security keys.
PKCS11 Utilities package(SUNWcsl) was found.
Encrypted SNMP Communication is supported.Setup of Agent component is successful.
Starting Sun Management Center database setup...
verifyDatabaseDown: instance is not executing
Database consistency information missing.
Configuring database initialization parameter file
Stopping metadata component
Successfully disabled service sunmc-metadata
Stopping cfgserver component
Successfully disabled service sunmc-cfgserver
Stopping topology component
Successfully disabled service sunmc-topology
Stopping event component
Successfully disabled service sunmc-event
Stopping grouping service
Successfully disabled service sunmc-grouping
Stopping trap component
Successfully disabled service sunmc-trap
Stopping java server
Successfully disabled service sunmc-javaserver
Stopping webserver
Successfully disabled service sunmc-webserver
Stopping agent component
Successfully disabled service sunmc-agent
Stopping platform component
Successfully disabled service sunmc-platform
verifyDatabaseDown: instance is not executingFailed to enable service sunmc-database
Database setup failed : db-start failedUpdating registry...
As database is not setup, Marking server setup as failed in Registry.None of the base layers are setup.
No Addon is setup.
Following Addons are not yet setup: Advanced System Monitoring,ELP Config-Reader Monitoring,Desktop,Service Availability Manager,Sun Fire Entry-Level Midrange System,Performance Reporting Manager,Solaris Container Manager,System Reliability Manager,Workgroup ServerCould not finish requested task.
I am already uninstall(use uninstall script ) and reinstall back , but the result is same , Does any one know how to solve this problem ?
Regards
hadi
DB:2.86:Smc 4.0 Db-Start Failed m7
Greetings,
I've not been able to resolve the topology issues, the recommended fixes have not resolved my issues. Upon un-installaing and re-installing multiple times I'm still not able to get the topology component to initialize correctly. The Management Center does display in the Applications listing in the Java Web Console (3.0.2) however clicking on it and displaying the main page for the Management Center 4.0 displays just a few items in the left nav, and none of the 'Discover Systems' requests make it in the queue or work at all. None of the other Management modules are displayed either. The web start console refuses to connect to the server as well, replying with a 'Server communication error, the server version may be incompatible' error.
I've noticed quite a bit of sql errors in the install, I've not seen anything in the release notes or forums regarding this issue either. Any help on this would be greatly appreciated! SMA and snmpdx are both disabled as well as dmi services.
The server is x86 Dell 2950, Entire install of Solaris 10 U3 11/06. Agent, Server, and Console components are installed and setup.
*/etc/project:*
system:0::::
user.root:1::::
noproject:2::::
default:3::::project.max-shm-memory=(priv,5368708912,deny)
group.staff:10::::from */var/adm/messages:*
Dec 19 12:19:21 dvall topology[963]: [ID 840589 daemon.alert] syslog Dec 19 12:19:21 topology parsing error in file://localhost/topology-license-d.x;flags=ro(13):
Dec 19 12:19:21 dvall topology[963]: [ID 259113 daemon.alert] syslog Dec 19 12:19:21 topology *** aborting execution ***install log:
Started ./es-inst at Wed Dec 19 11:50:19 PST 2007.
Running on SunOS dvall 5.10 Generic_125101-07 i86pc i386 i86pc.----------------------------------------------------------------------------
This script installs Sun (TM) Sun Management Center 4.0
----------------------------------------------------------------------------Installation files source directory: /root/src/SunMC/disk1/image/SunOS/i386
----------------------------------------------------------------------------Copying required XML APIs from /root/src/SunMC/disk1/sbin/bin/i386-sun-solaris10 to /var/run/tmp/SunMCInstall/XML/APIs
Enter the directory in which you want to install: [ /opt ] /opt/SunMC/
Installation destination directory: /opt/SunMC
--------------------------------------------------------------------------------------------------------------------------------------------------------
Select the Sun Management Center 4.0 components to install:
3 component(s) are available for your selection:
Do you want to install the Server component (y|n|q) y
Note: The Agent component will be installed automatically.
Do you want to install the Console component (y|n|q) y
----------------------------------------------------------------------------Looking for valid JDK.
Found incomplete installation of : "1.6.0_03-b05"
SYMON_JAVAHOME is set to: /usr/java
JDK version is: "1.6.0_03-b05"
JDK check OK.Looking for Tomcat Webserver.
Webserver check OK.You must agree to the above license agreement to proceed with installation.
Do you agree (y|n|q) ySun Management Center 4.0 can be installed in the following languages:
Traditional Chinese
Simplified Chinese
French
Japanese
KoreanEnglish is installed by default.
Are other languages required (y|n|q) n
----------------------------------------------------------------------------Reading Add-On products from image. Please wait...
This can take approximately 3 minutes to complete.Found: Sun Management Center Integration for Unicenter TNG
Found: Advanced System Monitoring
Found: System Reliability ManagerFound: Generic X86/X64 Config Reader
Found: Solaris Container Manager
Found: Service Availability Manager
Found: Performance Reporting Manager
Checking for applicable products. Please wait...
This can take approximately 2 minutes to complete.Unable to find package directory for SUNWeshsm
Component script found: check-remote-install.sh
Running: /root/src/SunMC/disk1/image/SunOS/i386/Addons/TNG/Solaris_10/Basic//check-remote-install.sh
Return value: 1
Component script found: check-remote-install.sh
Running: /root/src/SunMC/disk1/image/SunOS/i386/Addons/TNG/Solaris_10/Basic//check-remote-install.sh
Return value: 1
Component script found: check_TNG_Server.sh
check if TNG Server is installed.
Cannot install the Unicenter TNG addon Server component. CA-TNG is not installed, you should install CA-TNG first.
Running: /root/src/SunMC/disk1/image/SunOS/i386/Addons/TNG/Solaris_10/Basic//check_TNG_Server.sh
Return value: 2
Script returned 2. Skipping this component.
Component script found: gca-check.sh
Running: /root/src/SunMC/disk1/image/SunOS/i386/Addons/X86ConfigReader/Solaris_10/Basic//gca-check.sh
Return value: 1The Sun Management Center 4.0 Production environment will be installed.
----------------------------------------------------------------------------
The following Add-On Products are applicable for installation.
Advanced System Monitoring
Service Availability Manager
Performance Reporting Manager
Solaris Container Manager
System Reliability Manager
Sun Management Center Integration for Unicenter TNG
Generic X86/X64 Config ReaderDo you want to select all the products (y|n|q) n
Select the products you want to install:
Advanced System Monitoring (y|n|q) y
Service Availability Manager (y|n|q) y
Performance Reporting Manager (y|n|q) y
Solaris Container Manager (y|n|q) y
System Reliability Manager (y|n|q) y
Sun Management Center Integration for Unicenter TNG (y|n|q) n
Generic X86/X64 Config Reader (y|n|q) y
----------------------------------------------------------------------------The following Add-On Products will be installed:
Advanced System Monitoring
Service Availability Manager
Performance Reporting Manager
Solaris Container Manager
System Reliability Manager
Generic X86/X64 Config ReaderDo you want to proceed (y|n|q) y
----------------------------------------------------------------------------The following Add-On products are covered under license agreement:
You must agree to the above license agreement to proceed with installation.
Do you agree (y|n|q) yDisk Space Checking....
Installing the components...
----------------------------------------------------------------------------
Installing... PRODUCT.PE COMPONENT.AGENTProcessing package instance SUNWescom from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Common Components(i386) 4.0,REV=2.10.2007.10.23
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.Installing Sun Management Center Common Components as SUNWescom
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
2426 blocks
## Executing postinstall script.Installation of SUNWescom was successful.
Processing package instance SUNWenesi from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center script localization messages(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
1 package pathname is already properly installed.Installing Sun Management Center script localization messages as SUNWenesi
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
683 blocksInstallation of SUNWenesi was successful.
Processing package instance SUNWesagt from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Agent(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.Installing Sun Management Center Agent as SUNWesagt
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
24750 blocks
## Executing postinstall script.Installation of SUNWesagt was successful.
Processing package instance SUNWesmib from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Mib Instance Module(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
4 package pathnames are already properly installed.Installing Sun Management Center Mib Instance Module as SUNWesmib
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
281 blocksInstallation of SUNWesmib was successful.
Processing package instance SUNWesken from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Kernel Reader Module(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
5 package pathnames are already properly installed.Installing Sun Management Center Kernel Reader Module as SUNWesken
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
399 blocksInstallation of SUNWesken was successful.
Processing package instance SUNWesmod from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Agent Modules(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
9 package pathnames are already properly installed.Installing Sun Management Center Agent Modules as SUNWesmod
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
235 blocksInstallation of SUNWesmod was successful.
Processing package instance SUNWesae from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Agent System Files(i386) 4.0,REV=2.10.2007.10.15
Using / as the package base directory.
## Processing package information.
## Processing system information.
9 package pathnames are already properly installed.Installing Sun Management Center Agent System Files as SUNWesae
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
28 blocks
## Executing postinstall script.Installation of SUNWesae was successful.
Processing package instance SUNWesaem from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Event Module for Agent(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
9 package pathnames are already properly installed.Installing Sun Management Center Event Module for Agent as SUNWesaem
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
186 blocksInstallation of SUNWesaem was successful.
Processing package instance SUNWesgui from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center GUI Installation(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
7 package pathnames are already properly installed.Installing Sun Management Center GUI Installation as SUNWesgui
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
6250 blocksInstallation of SUNWesgui was successful.
Processing package instance SUNWsuagt from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Dynamic Agent Update Agent Components(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
6 package pathnames are already properly installed.Installing Sun Management Center Dynamic Agent Update Agent Components as SUNWsuagt
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
152 blocksInstallation of SUNWsuagt was successful.
Processing package instance SUNWesval from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Validation Tool Components(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
4 package pathnames are already properly installed.Installing Sun Management Center Validation Tool Components as SUNWesval
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
220 blocksInstallation of SUNWesval was successful.
Processing package instance SUNWesaxp from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Java API for XML Processing (JAXP) v1.1.3(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Java API for XML Processing (JAXP) v1.1.3 as SUNWesaxp
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
2362 blocksInstallation of SUNWesaxp was successful.
Processing package instance SUNWesmcp from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Module Configuration Propagation(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
8 package pathnames are already properly installed.Installing Sun Management Center Module Configuration Propagation as SUNWesmcp
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
249 blocksInstallation of SUNWesmcp was successful.
Processing package instance SUNWeslac from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Local Access(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.Installing Sun Management Center Local Access as SUNWeslac
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
14 blocksInstallation of SUNWeslac was successful.
Processing package instance SUNWesafm from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center FMA Service Module for Agent(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
5 package pathnames are already properly installed.Installing Sun Management Center FMA Service Module for Agent as SUNWesafm
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
92 blocksInstallation of SUNWesafm was successful.
Package SUNWservicetagr is already installed on this system.
Validating the Registry entry.
Package SUNWservicetagu is already installed on this system.
Validating the Registry entry.
Package SUNWstosreg is already installed on this system.
Validating the Registry entry.
----------------------------------------------------------------------------
Installing... PRODUCT.PE COMPONENT.CONSOLE
Package SUNWescom is already installed on this system.
Validating the Registry entry.
Package SUNWenesi is already installed on this system.
Validating the Registry entry.Processing package instance SUNWescon from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Console(i386) 4.0,REV=2.9.2007.10.16
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
4 package pathnames are already properly installed.Installing Sun Management Center Console as SUNWescon
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
6638 blocksInstallation of SUNWescon was successful.
Processing package instance SUNWesjp from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Additional Components(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Additional Components as SUNWesjp
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
5819 blocksInstallation of SUNWesjp was successful.
Package SUNWesaxp is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesclt from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Client API(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Client API as SUNWesclt
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
1609 blocksInstallation of SUNWesclt was successful.
Processing package instance SUNWesjrm from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Client API support classes(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Client API support classes as SUNWesjrm
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
663 blocksInstallation of SUNWesjrm was successful.
Processing package instance SUNWenesf from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Console properties(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Console properties as SUNWenesf
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
557 blocks
## Executing postinstall script.Installation of SUNWenesf was successful.
Package SUNWesgui is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesasc from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Advanced Services Console(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Advanced Services Console as SUNWesasc
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
156 blocksInstallation of SUNWesasc was successful.
Processing package instance SUNWescix from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Import/Export(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Import/Export as SUNWescix
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
156 blocksInstallation of SUNWescix was successful.
Processing package instance SUNWsucon from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Dynamic Agent Update Console Components(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Dynamic Agent Update Console Components as SUNWsucon
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
27 blocksInstallation of SUNWsucon was successful.
Processing package instance SUNWescli from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Command Line Interface(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
5 package pathnames are already properly installed.Installing Sun Management Center Command Line Interface as SUNWescli
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
862 blocksInstallation of SUNWescli was successful.
Processing package instance SUNWesclb from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Command Line Interface For BatchMode(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
4 package pathnames are already properly installed.Installing Sun Management Center Command Line Interface For BatchMode as SUNWesclb
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
155 blocksInstallation of SUNWesclb was successful.
Package SUNWesval is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesmc from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center MCP Console(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.Installing Sun Management Center MCP Console as SUNWesmc
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
200 blocksInstallation of SUNWesmc was successful.
Processing package instance SUNWescdv from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Console Dataview(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.Installing Sun Management Center Console Dataview as SUNWescdv
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
354 blocksInstallation of SUNWescdv was successful.
----------------------------------------------------------------------------
Installing... PRODUCT.PE COMPONENT.SERVER
Package SUNWescom is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesbui from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Web Console(sparc) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.Installing Sun Management Center Web Console as SUNWesbui
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
7789 blocksInstallation of SUNWesbui was successful.
Processing package instance SUNWesbuh from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Help(sparc) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Help as SUNWesbuh
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
498 blocksInstallation of SUNWesbuh was successful.
Package SUNWenesi is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesdb from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Database(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management Center Database as SUNWesdb
## Executing preinstall script.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Group smcdbg created
User smcdbu created
## Installing part 1 of 1.
/opt/SunMC/SUNWsymon/base conflicting pathname not installed
/opt/SunMC/SUNWsymon/base/bin conflicting pathname not installed
/opt/SunMC/SUNWsymon/base/bin/i386-sun-solaris2.10 conflicting pathname not installed
/opt/SunMC/SUNWsymon/base/lib conflicting pathname not installed
/opt/SunMC/SUNWsymon/base/lib/i386-sun-solaris2.10 conflicting pathname not installed
/opt/SunMC/SUNWsymon/lib/sbin conflicting pathname not installed
/opt/SunMC/SUNWsymon/sbin conflicting pathname not installed
928 blocksInstallation of SUNWesdb was successful.
Package SUNWesagt is already installed on this system.
Validating the Registry entry.Processing package instance SUNWessrv from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Server(i386) 4.0,REV=2.9.2007.10.16
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
12 package pathnames are already properly installed.Installing Sun Management Center Server as SUNWessrv
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
10640 blocks
[ verifying class preserve ]Installation of SUNWessrv was successful.
Processing package instance SUNWessa from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Server/Agent(i386) 4.0,REV=2.10.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
10 package pathnames are already properly installed.Installing Sun Management Center Server/Agent as SUNWessa
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
2218 blocksInstallation of SUNWessa was successful.
Package SUNWesjp is already installed on this system.
Validating the Registry entry.
Package SUNWesaxp is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesse from /root/src/SunMC/disk1/image/SunOS/i386/PE/Solaris_10/Basic
Sun Management Center Server System Files(i386) 4.0,REV=2.10.2007.10.15
Using / as the package base directory.
## Processing package information.
## Processing system information.
5 package pathnames are already properly installed.Installing Sun Management Center Server System Files as SUNWesse
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
36 blocks
## Executing postinstall script.Installation of SUNWesse was successful.
Package SUNWesclt is already installed on this system.
Validating the Registry entry.
Package SUNWesjrm is already installed on this system.
Validating the Registry entry.Processing package instance SUNWmeta from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Metadata Agent(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
3 package pathnames are already properly installed.Installing Sun Management Center Metadata Agent as SUNWmeta
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
38 blocksInstallation of SUNWmeta was successful.
Package SUNWenesf is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesmdr from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center MDR for Basic Pack(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
4 package pathnames are already properly installed.Installing Sun Management Center MDR for Basic Pack as SUNWesmdr
## Installing part 1 of 1.
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
246 blocksInstallation of SUNWesmdr was successful.
Package SUNWesgui is already installed on this system.
Validating the Registry entry.Processing package instance SUNWesweb from /root/src/SunMC/disk1/image/SunOS/i386/PE/Common/Basic
Sun Management Center Web Console(i386) 4.0,REV=2.9.2007.10.15
Using /opt/SunMC as the package base directory.
## Processing package information.
## Processing system information.
2 package pathnames are already properly installed.Installing Sun Management C
-
RELEVANCY SCORE 2.86
DB:2.86:Cannot Reconnect Hosts To Virtual Centre Server 7z
I had some problems upgrading from 2.0.1 to 2.0.2 and as such i created a new DB for virtual centre.
Now i am unable to recconnect the existing hosts to this Virtual Centre,
I'm getting the following errors...
"Failed to install the VirtualCenter Agent Service"
Can anyone help?
DB:2.86:Cannot Reconnect Hosts To Virtual Centre Server 7z
Had exactly the same problem when I upgraded. If I remember correctly the /tmp/vmware-root directory needs to be created and then the mgmt-vmware service needs restarting in the service console for every host. The article below explains in further detail.
http://www.vmwarewolf.com/failed-to-install-the-virtualcenter-agent-service/
-
RELEVANCY SCORE 2.85
DB:2.85:P2v Fails To Install The Vmm Agent On The Source Machine At System Information Step Please Help pa
Hi folks -
I attempted a P2V conversion of a Windows 2000 Serverbut the P2V only copied over the C drive, not the Ddrive. I believethisoccurred since the D drive hosted the Virtual Memory paging file. The paging file has since been relocated
back onto the C drive.I then attempted tostart the P2V process again. However I first used Add / Remove programs to remove the VMM agent which I think was a mistake. Now when I attempt to start the P2V for the same server at the'System Information
/ SCAN System'step,I receive the following message:
An internal error has occurred trying to contact an agent on themyserver-W2K server. Ensure the agent is installed and running. Ensure the WMI service is installed and running, then restart the agent. ID: 3154 Details: Unknown error (0x80131501)
WMI service is installed and running but the VMM agent is not installed; I removed it via Add/Remove. I believe there are remnants of the agent somewherebut I have not seen any within the system registry.
I tried to manually install the vmmAgent.msi and received the following: Microsoft System Center Virtual Machine Manager Agent Setup Wizard ended prematurely because of an error. Your system has not been modified.Any ideas to get me around this
problem?
Host is Windows 2008 R2 Server Core using System Center Version 2008 R2 version 2.0.4273.0
Thanks for your interest.DB:2.85:P2v Fails To Install The Vmm Agent On The Source Machine At System Information Step Please Help pa
Hi Hector... that was a valid point.
i tried the same, installing the respective p2v agent...but when the scvmm starts collecting the system info. the p2v agent gets uninstalled automatically!!? why is that?
appreciate your help. -
RELEVANCY SCORE 2.85
DB:2.85:Installation Scom Agent Failing dx
Hello,
on two servers I am getting an error:
The Operations Manager Server failed to open service control manager on computer Servername.ad
Therefore, the Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: AD\SVCMOMAction
Error Code: 80070005
Error Description: (null)
The account used to push is in the Administrators Group on the local machine.
It is not domain controller
These machines were having the agent before but got grayed out since...
There is no firewall
Telnet Servername opmgrms1 5723 (management server) works
Telnet Servername opmgrrms1 5723 (root management server) works
I stopped Forefront Client Security Services
Any idea?
Thanks,
DomSystem Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager
DB:2.85:Installation Scom Agent Failing dx
Hi,Please also ensure DCOMisenabled:
Enable or Disable DCOM
http://technet.microsoft.com/en-us/library/cc771387.aspxIf the issue persists, please check the Event Log on the problematic servers as well as the RMS; if there are any related errors, please let us know
the details.Hope this helps.
Thanks.
Nicholas Li - MSFT
Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
RELEVANCY SCORE 2.85
DB:2.85:When Adding Host I Get Error 10437 kx
I am getting this when trying to add a host to VMM, this host also happens to be the host running Virtual Machine Manager:
Error (10437)
Virtual Machine Manager failed to addSERVERNAME as a host.Recommended Action
Ensure that the Virtual Machine Manager Agent service is started on SERVERNAME, and then try the operation again.
I checked and the Virtual Machine Manager Agent service is running. I have tried restarting the service and that didnt work. I then went to try and uninstall the
agent but its not showing up in add/remove programs....DB:2.85:When Adding Host I Get Error 10437 kx
Is this server a fresh vmm installation or an upgrade?
If it is not an upgrade, some reasons for this could be:
1. Your machine is DMZ host
2. Some other application like IIS is listening on the same port.
3. Credentials that agent service is running under is different from vmmservice credentials.If you don't have a lot of hosts, you can also try reinstalling vmmserver.
-
RELEVANCY SCORE 2.84
DB:2.84:Vmm 2012 - Opsmgr 2012 Integration Error z9
We are having a problem with the VMM2012 and OpsMgr 2012 integration. Both systems have a single MS and have been updated from the previous version.
When we set up the connection in VMM the following error is displayed after a few seconds:
VMM Management group object cannot be found.
One or more of the Virtual Machine Manager objects monitored by Operations Manager could not be discovered. This might be caused by a missing or outdated version of the System Center Virtual Machine Manager management pack in Operations Manager.
- The OpsMgr Agent is running on the VMM MS
- The MPs are all imported
- We already cleared the health state of the agent and tried a repair install
- The account used is administrator in both systems and local admin on SCVMMWe have one warning in OpsMgr regarding the SCVMM MS:
The process started at 11:33:26 AM failed to create System.PropertyBagData.Errors found in output:
C:\Program Files\System Center Operations
Manager\Agent\Health Service State\Monitoring Host Temporary Files
1123\3445\HotFixValidation.vbs(117, 10) Microsoft VBScript runtime error:Subscript out of range: 'count'
When we run the PRO test in the OpsMgr connector on SCVMM it fails after while with the following error message:
Error (25921)
Failed to create diagnostics PRO tip
Recommended Action
Check if Operations Manager Agent is running on the computer running VMM management server and that it is monitored.Does anyone havean idea what else we can check or how to fix this.
Thank you
SaschaDB:2.84:Vmm 2012 - Opsmgr 2012 Integration Error z9
Upgraded MPs are available at pinpoint and download center now, sorry for the delay .
http://systemcenter.pinpoint.microsoft.com/en-US/applications/monitoring-pack-for-system-center-2012-virtual-machine-manager-12884940307
http://www.microsoft.com/en-us/download/details.aspx?id=29679[Disclaimer] This posting is provided AS IS with no warranties, and confers no rights. User assumes all. -
RELEVANCY SCORE 2.84
DB:2.84:1067 Error With Vmm Agent In Vmm2012 ap
Hi every one
I Have Installed SCVMM SP1 BETA in Windows server 2012 RTM and managing Hyper-V Hosts.
After two three days, System center virtual machine manager agent(SCVMM local agent) service has stopped in SCVMM server.
I m trying to start service manually it is throwing me below mentioned Error
Windows Could not start the system center virtual machine manager agent service on local computer
Error 1067: The process Terminated Unexpectedly
DB:2.84:1067 Error With Vmm Agent In Vmm2012 ap
Look
this solutionfor update settings VMM database:
update dbo.tbl_VMM_GlobalSetting set PropertyValue is Null where PropertyName='LastSQMEngineRefreshTime', PropertyValue is Null where PropertyName='UpgradeTime' -
RELEVANCY SCORE 2.84
DB:2.84:Ops Center Agent Installation Fails 11
I'm working on Oracle Enterprise Manager Ops Center 11gR1 PSU-3
The agent provisioning fails when I discover and manage the OS of a server
the server i want to deploy the agent to is a x4600, running Solaris 10 10/08 s10x_u6wos_07b X86I tried to install the agent manually, but it still failed with this error:
Error 4 installing SUNWjavadb-common; see log file for details.
Error 4 installing SUNWjavadb-core; see log file for details.This is from the error log:
Current administration does not allow new instances of a package
SUNWjavadb-common on zone zone14 to be created. However, the
installation service was unable to determine which package instance
to overwrite.
INSTANCE package SUNWjavadb-common on zones zone14Installation of SUNWjavadb-common was suspended (interaction
required).
Error 4 installing SUNWjavadb-common.DB:2.84:Ops Center Agent Installation Fails 11
Regards,
It seems that you have multiple instances of the javadb packages in zone14 and that you have to remove all of these before retrying the agent installation.
-
RELEVANCY SCORE 2.84
DB:2.84:Virtual Center Question pd
Hello,
I have installed VMWare Server (Free Ed). And have downloaded a trial of virtual center. I installed it and now I'm trying to add a host, but I get an error about Server Agent is not responding. So do I have to install an agent and if so where do I get it.
DB:2.84:Virtual Center Question pd
Thanks for the informatilon.
Mike
-
RELEVANCY SCORE 2.84
DB:2.84:Error 410 1920 When Installing Vmm Agent On Windows 2000 Advanced Server pa
Hello,I have a Windows 2008 R2 server that is Domain Controller, Hyper-V and SCVMM 2008.
My physical server that I want to virtualize is a Windows 2000 Advanced Server SP4.
When I try to install the agent using the Administration Console SCVMM, I receive an error : ID 410.
When I try to install the agent locally (directly on the physical server), I see an error : ID 1920 in Event Viewer.
Error 1920. Service 'Virtual Machine Manager P2V Agent (VMMP2VAgent) failed to start. Verify That You Have Sufficient privileges to start system services.I installed the agent locally with the domain administrator account.
Windows Installer 3.1, Microsoft C 2005 Redistruable, Rollup 1 for SP4 installed
Can you help me?
In advance, thank you very much.
N.DDB:2.84:Error 410 1920 When Installing Vmm Agent On Windows 2000 Advanced Server pa
Hi,
For your P2V Win 2000 , you only can perform P2V offline . Please refer to
http://technet.microsoft.com/en-us/library/bb740951.aspx
For offline P2V instruction, please refer tohttp://blogs.technet.com/b/pfe-ireland/archive/2009/04/06/scvmm-p2v.aspx
Hope this info helpLai (My blog:- http://www.ms4u.info)
-
RELEVANCY SCORE 2.83
DB:2.83:Issues After Upgrading To Virtual Center 2.5 px
Hello,Yesterday I installed Virtual Center 2.5 on a physical and used a fresh new database on a SQL05 server. When I connected my hosts to the new install of VC, I got an error about being able to insatll the VC agent. I tried adding them again to the VC server and vola they came into it and everything looked good.
Well, here are the issues to date.
1. I can't use the VI 2.5 client to connect directly to the ESX hosts. It wants to install version 2.0 of the VI client.
2. A server that I want to power on through Virtual Center genterates the following error:
"The request refers to an object that no longer exists or has never existed"
If I use a VI 2.0 client to connect directly to the host, I can power on the server no problem.
To verify that the VC agent was actually upgraded on the ESX hosts, I ran the following command on the host itself:
rpm -qa |grep vpx
This returned:
VMware-vpxa-2.5.0-64192
I ran the following commands:
service vmware-mgmt restart
service vmware-vpxa restart
I then removed then re-added the host to Virtual Center. None of the issues went away.
Any help would be great. I have a support call in, but am waiting to hear back.
DB:2.83:Issues After Upgrading To Virtual Center 2.5 px
It is interesting that I didn't do the reboot of the ESX environment last night and by this morning the Power On through Virtual Center issue was resolved. -
RELEVANCY SCORE 2.82
DB:2.82:Updated Vi Client 9j
I updated my Virtual Center server to VC-2.0.2-61426. Now the VI client will not connect to one ESX server. There are four in my farm, two 3.0.2, patched thru Oct 8, and two 3.0.1 also patched thru Oct 8. Three of the servers load fine, the fourth (3.0.1) always fails with the errors:
Login failed due to a bad username or password
Failed to install the VirtualCenter Agent service
I am not using a bad username or password - and in fact can use the VI client to connec directly to the server. My whole purpose here was to upgrade the servers to ESX-3.0.2-61618, but now I have these orphaned VMs on a server that has no idea of VMotion.
Since installing the newer version, even version 2.0.2-50618 on a workstation no longer connects to this server.
Suggestions, help, face saving quick maneuvers?
thx
Bill
DB:2.82:Updated Vi Client 9j
Ok great glad things got worked out -
RELEVANCY SCORE 2.82
DB:2.82:Cannot Install Vmm Agent On A Server Host Vmm2012sp1 / Server Host 2008r2 83
hi,
I have a Cluster Failover with 2 nodes that where using SCVMM 2012 Beta.
When i upgraded the SCVMM to 2012 SP1 i added the node two without any problem, but on node one in gives me error.
I cannot unninstall the old agent, dont give any error but wont uninstall, also when i tried to install manually it give the following error:
EventID 1013
Product: Microsoft System Center Virtual Machine Manager Agent (x64) -- Failed to configure the WS-Management service. In the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows Remote
Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.============================================================================================================
Running from the VMM server it gives the following error:
Error (421)
Agent installation failed on MCHSRVHYPERV01.manchete.pt because of a WS-Management configuration error.Recommended Action
Ensure that the Windows Remote Management service is enabled and running on the server MCHSRVHYPERV01.manchete.pt. Additionally, in the Local Group Policy Editor (gpedit.msc), navigate to Computer Configuration\Administrative Templates\Windows Components\Windows
Remote Management (WinRM), and then ensure that there are no policy settings configured for WinRM Client or WinRM Service.Unninstalling the old agent gives the following error:
EventID: 1034 followed by: 11725
I checked SPN's, they are ok in both servers, also i checked for any configuration on the GPO for RM, everything is default.
Thanks for the attention.
Sincerely,
Alex. M.DB:2.82:Cannot Install Vmm Agent On A Server Host Vmm2012sp1 / Server Host 2008r2 83
Is this solved out? Can we close the thread?
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )
After the upgrade everything worked fine, not a solution for everyone i think, but for me solved the problem.
Sincerely,
AM -
RELEVANCY SCORE 2.82
DB:2.82:Getting An Error While Configuring Vmm For System Center 2012. Error - An Internal Error Has Occurred Trying To Contact An Agent On The Win-Ntju8cnu Server: : . Ensure The Agent Is Installed And Running. aa
Hi,
I am trying to install System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD.
I downloaded install guide the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=enid=10712
I have followed the installation document getting an error while configuring VMM for System Center 2012.error details from log file given below:
------------------------------------------------------------------------------------------------
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String ExportedCertificate, ErrorInfo ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs-------------------------------------------------------------------------------------------------
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location install guide.
thanks.
====DB:2.82:Getting An Error While Configuring Vmm For System Center 2012. Error - An Internal Error Has Occurred Trying To Contact An Agent On The Win-Ntju8cnu Server: : . Ensure The Agent Is Installed And Running. aa
Hi,
I am trying to install System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD.
I downloaded install guide the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=enid=10712
I have followed the installation document getting an error while configuring VMM for System Center 2012.error details from log file given below:
------------------------------------------------------------------------------------------------
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace: at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String ExportedCertificate, ErrorInfo ErrorInfo)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace: at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs-------------------------------------------------------------------------------------------------
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location install guide.
thanks.
==== -
RELEVANCY SCORE 2.82
DB:2.82:Virtual Center Install Problem s9
Has anyone seen this while installing Virtual Center:Error 1920 : Service VMware VC Web Service(VmaService) failed to start. Verify that you have sufficient privileges to start the system service."
Cant figure this one out. Saw an earlier post by someone who said it was a "SQL permission error" but no info on how to fix.
Any ideas?
thanks,
Brad D.
DB:2.82:Virtual Center Install Problem s9
Make sure that, when setting up the ODBC connection, you create a System DSN, not a User DSN. User DSNs are user specific, System DSNs can be seen by all users. The Virtual Center services run via the local system account, which will only see a System DSN.Another tip - give the DB user Owner rights to the DB. If you don't do this the VC install will not give you the option to use existing data in the database. (ie, when re-installing or migrating the db from an access database).
Message was edited by:
mjhumphrey
-
RELEVANCY SCORE 2.81
DB:2.81:Virtual Machine Manager Issue kd
We install System Center Virtual Machine Manager on a Windows 2008 R2. When I try to add a host, it asks Security file path. Where is the Security file path?
After search in the internet, I think I may need to run VMM Agent. However, I don't see the VMM agent in the programs. If I try to install the VMM agent, it says Server which contains all agent components is already installed. It is true because I can see
teh VMM agent service is running, but where is the VMM agent. Or where I can run the VMM agent? Here is the screenshot:
http://chicagotech.net/server/vmm1.htmlBob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.netHow to Setup Windows, Network, VPN Remote Access on
http://www.howtonetworking.comDB:2.81:Virtual Machine Manager Issue kd
Hi Brian,
As posted in another thread, both Host and physical machines are on the DMZ. I installed VMM on th ehost machine. I beleive that also installed the VMM agent automatically because the VMM agent service is running and I can't install it again. If the agent
has been installed, where is the security file? If teh agent hasn't been installed, why can't allow me to install it?Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.netHow to Setup Windows, Network, VPN Remote Access on
http://www.howtonetworking.com -
RELEVANCY SCORE 2.81
DB:2.81:Error Installing Agent In Windows 2008 R2 Cluster fs
Hello Everyone,I'm trying to install the SCOM 2008 R2 agent in my windows 2008 R2 cluster BUT I'm having problems with that.First I installed the SCOM agent in the nodes of that cluster, and then I enabled for both nodes of the cluster the option Allow this agent to act as a proxy...Then I went to the monitoring - Windows computers and saw the virtual name of the cluster listed but the sate shows Not monitored, the nodes are healthy. Next I read that I also need to install the agent on the Cluster itself, to do that I went to Administration - Device Management - and run a discovery to install the agent on the cluster using the Cluster virtual name, unfortunately this process fails with the error:
The Operations Manager Server failed to open service control manager on computer CLUSTER01.mydomain.tldTherefore, the Server cannot complete configuration of agent on the computer. Operation: Agent Install Install account: MYDOMAIN\SCOMSVCError Code: 80070005 Error Description: (null) If I select the option Verify discovered computers can be contacted I get the error:There were no computers discovered that meet your criteria. Please verify....The Cluster can be contacted, I can ping it, I already tried to disable FW but still doesn't works, since that I'm new to SCOM, I guess that I'm missing something, can anyone help?DB:2.81:Error Installing Agent In Windows 2008 R2 Cluster fs
Hi there. I admit I haven't installed an agent on a 2008 cluster, but you shouldn't need to install the agent on the virtual server. The virtual server will be agentlessly managed by one of the physical nodes. The reason you see it as not monitored in the Windows Computer view is because the virtual servers are not Windows Computers and there are no rules or monitors targeted at virtual server instances. If you take a look at Discovered Inventory, and change the target to Virtual Server, you should see your virtual server and its state should be something other than not monitored.- LayneYou are right, thank you for the feed back
-
RELEVANCY SCORE 2.81
DB:2.81:Scom_2012 Not_Install Agent s8
The Operations Manager Server failed to open service control manager on computer
ComputerNameDomain
Therefore, the Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DomainUser
Error Code: 80070005
Error Description: Access is denied.
_____________________________________________________________________
Related to the above error when I am installing an Agent
The DiscoveryDB:2.81:Scom_2012 Not_Install Agent s8
Hi OMID Zamani,
All posts from friends dktoa,
Prajwal Desai, and Microsoft
hopeless guy, solve all
your problem. I will work with
the following:- If your ornanização has the policy
to use local users who are allowed
Adminitrador place on the servers, you
can add it to the Agent installation.- Another way is to create
a user eg OM_AAA and add it
into the Domain Admins group in Active
Directory.- And finally, you can ask
the administrator to set the username and password
of the Domain Administrator at the time you
are installing the agents.
Thanks a lot
Wilsterman Fernandes -
RELEVANCY SCORE 2.81
DB:2.81:Vmware View Agent Installer - Service Fails To Start c8
I have several virtual desktops in a View 4.6.3 environment where I can't re-install the VMware View Agent.The installation fails with the following:
VMware View Agent Installer Information
Error 1920.Service VMware View Composer Guest Agent Server (vmware-viewcomposer-ga) failed to start. Verify that you have sufficient privileges to start the system services.
I have removed Agent, rebooted, removed VM Tools, rebooted, re-installed VM Tools, rebooted and attempted to re-install the View Agent.
The issue is not consistent to a Pool or a base image that a Pool is created from - it is sporadic and driving me crazy.
Anyone see this problem and have a fix?
DB:2.81:Vmware View Agent Installer - Service Fails To Start c8
We're having exactly the same issue on Windows 8.1 (64 bit) persistent desktops while trying to update the 5.x view agent with the Horizon View 6.0.1 agent. Tried all the same things and added trying to run the installer "as administrator" - all with no success. -
RELEVANCY SCORE 2.81
DB:2.81:Replace Ssl Certificates With Own Ca Certs d9
I am trying to replace SSL certificates on my ESX 3.5 host. I am able to generate the cert request using the following command
openssl req -new -key ./rui.key gt; request.csr
I then take the certificate request text and generate the new certificate from our CA. I copy the certificate to /ect/vmware/ssl and restart the mgmt-vmware service. When I try to add the host to my Virtual Center 2.5 server I get an error stating
"Failed to install the VirtualCenter Agent Service."
If I copy the old cert back it connects fine. Any ideas?
DB:2.81:Replace Ssl Certificates With Own Ca Certs d9
We are having this same issue.
I, too, have followed this, and other, documentation but with no success.
I am using the openssl 0.9.8g lite version installed on our VC Server (certificate generated for VC works fine).
Thanks.
-
RELEVANCY SCORE 2.81
DB:2.81:Virtual Center Error After An Upgrade d9
Hi there,After an upgrade from VC 2.0 toVirtual Center 2.5, I still have some error messages:
"an error occured during configuration of the HA agent on the host"
and "Failed to install VirtualCenter Agen Service".
I have 4 clusters and is just on one cluster that I have these messages.
In this cluster, In one Host, I made the copy of the "vpx-upgrade-esx-6-linux-32042" to the tmp and I setup this file.
But I still have the same message error.
Can somebody recomand me something?
Cheers
The Best Guy
|MSc in IT, University of Evry
|MCSE(Microsoft), CCA(Citrix)
|Paris-France
-
RELEVANCY SCORE 2.81
DB:2.81:Bam Data Flow Service Problem 3j
Hi,
Please help me.
Sagent Service Failed with as follows Error
----------------------------------------------------------------------------------------------------------------
Unable to allocate new memory block. Please increase your SADCAGNT virtual memory size or add another Agent swap file.DB:2.81:Bam Data Flow Service Problem 3j
p.s. If you don't mind sharing, what is your company and project for BAM?
Regards, Stephen
-
RELEVANCY SCORE 2.80
DB:2.80:Error (10437) - Virtual Machine Manager Failed To Add [Server] As A Host. md
After a server restart of os (W2K8R2 SP1)VMM could not contact the host (which BTW VMM is running on). So I removed host (successfully through VMM) and then attempted to re-add it. SSP2.0SP1 (beta)is also installed on this server and has
been working fine.
Error (10437)
Virtual Machine Manager failed to add [server] as a host.
Recommended Action
Ensure that the Virtual Machine Manager Agent service is started on [server], and then try the operation again.
Restarting the agent had no effect.
VMM 2008 R2 2.0.4521.0SP1
Add Virtual Machine Host fails on 1.1 Install Virtual Machine AgentDB:2.80:Error (10437) - Virtual Machine Manager Failed To Add [Server] As A Host. md
I had the same problem when I tried to add my VMM server
Unbelivable my problem was with time , The time in VMM server and DC was different , after modifying the time , I could successfully added VMM server as host
Krishnadas Arakkal (MCT)
-
RELEVANCY SCORE 2.80
DB:2.80:Problem Connecting 2.5.4 Build-38650 Host To Vc 2.0.1 m9
Having a problem connecting 2.5.4 build-38650 host to VC 2.0.1:When attempting to connect the host, I am first getting the error "login failed due to bad username or password" This error comes up before I even input the username or password. The it gets to 84% complete and fails with error "failed to install virtual center agent service"
DB:2.80:Problem Connecting 2.5.4 Build-38650 Host To Vc 2.0.1 m9
You can try restarting the serverd and vpxa-vmware services and see if it helps. -
RELEVANCY SCORE 2.80
DB:2.80:P2v Failed 7x
Error (3154)
An internal error has occurred trying to contact an agent on the NY1865 server.
(Internal error code: 0x8099319E)
Recommended Action
Ensure the agent is installed and running. Ensure the WMI service is installed and running, then restart the agent.
WMI is up and running.
this is what i have under my regkey
HLKM\sotware\microsoft\microsoft system center virtual machine manager server\settings
BITSTcpPort (443)
IndigoTcpPort (8100)
P2VBITSTcpPort (445)
WSManTcpPort (80)
Please keep in mind I did many P2V before.
DB:2.80:P2v Failed 7x
If you have sql server running then stop the services and that may fix your problem... it worked for me...!
-
RELEVANCY SCORE 2.80
DB:2.80:Failed To Install Virtual Center Agent za
I have just upgraded my VC from 2.01 to 2.5. I have successfully reconnected to 7 of 8 3.01 hosts. On one of them, I get "Failed to Install VirtualCenter Agent." Where on the host can I check for a little more specific error message? Any ideas?DB:2.80:Failed To Install Virtual Center Agent za
Check to see if this folder exists on the host - /tmp/vmware-root. Also see http://kb.vmware.com/kb/4223326 and http://kb.vmware.com/kb/4478241. -
RELEVANCY SCORE 2.79
DB:2.79:Virtual Center 1.3 Installation Issue 9f
I have successfully created a SQL database on our db server. I have successfully created the ODBC connection on the local server which VC 1.3 will be installed, tested successfully. When Itry to install VC 1.3, I receive an error message of " VMwrae Virtual Center - Error 1920. Service VMware Virtual Center Web Service (vmaService) failed to start. Verify that you have sufficient privilages to start system service.The AD account that was created is an Administrator account on the SQL Server and the local server. Am I missing something? I amrunning Windows 2003 SP1.
DB:2.79:Virtual Center 1.3 Installation Issue 9f
Can you elaborate on how you solved the issue, I have the same problem.