• RELEVANCY SCORE 3.43

    DB:3.43:By How Numeric Measurements Are Displayed In Summary Tab ? mm






    Hi Developers,

    I would like to know , From which class the collected metrics are displayed. I have searched in org.rhq.core.domain.measurement package, I have found metric collection mechanism over there. Please help me to find the classes and package to fix my issue.

    I am getting decimal values for all metrics in summary tab of each resource. Eg : I have attached a screenshot for your reference. Since, I have been passing a numeric values to all the metrics for each resource. I need to fix this bug in my plugin. For that I need to know Where is the problem is happening.

    Regards,

    ArunRaj.

    DB:3.43:By How Numeric Measurements Are Displayed In Summary Tab ? mm


    Hi Developers

    In summary tab, values are collected based on the timerange. That is why I am not getting the last collected values ?

    Is that possible to display the last collected values in the Summary Tab ?

    Regards,

    ArunRaj.

  • RELEVANCY SCORE 2.96

    DB:2.96:Changing Metric Unit In Prime Infrastructure 7j






    Hi,

    By default, all measurements are displayed in feet, but I want them to be in meters

    Anybody knows how to do this?

    Thanks

    DB:2.96:Changing Metric Unit In Prime Infrastructure 7j


    Thanks a lot, Stefan

    I managed to change the unit

    However, there seems to be errors when I scale the map. I had to change it back to feet for the scaling to work correctly. After a little research, I found out this is a bug of this version (PI 1.2). I'm upgrading to v1.3 now

  • RELEVANCY SCORE 2.92

    DB:2.92:Performance Appraisals Requirement 7c






    Hi Experts,

    Please help me in configuring the below requirment in the Perofrmance appraisals

    My clients requirement is

    In the document there are fixed objectives with respect to dimensions example: there are five dimensions like finance, cusotmer, Internal Process, People, Environmental safety.

    There are fixed objectives in each dimension. example

    Finance

    1. Objective1

    Measurement - 96% attendance on working days ( )

    2. Objective 2

    Measurement - Zero equipment damage

    Measurement - Plant damage zero

    Customer

    1. Objective 1

    Measuerment -

    Measurement -

    Measuerment.

    Internal Process

    1. Objective

    Measuerment -

    2. Objective

    Measuerment -

    Measurement -

    Measuerment.

    3. Objective

    Measuerment -

    Measurement -

    Measuerment.

    Like this

    According to the requirement

    The measurements columns first HR ADMIN will fill in with requirment measurements according to the department and those should go into the measurement columns before creating the document.

    Here the measurement which are enterd by HR ADMIN, the manager can change their text or add new measurements or delete the measurements.

    These measurements changes on yearly bases but the objectives will be same.

    How can I configure in the system that when HR ADMIN creates the measurements with respect to those objectives and they should appear in the document and for manager they should be editable and add new measurements and delete any measurement.

    These measurements are different for different templates like for Admins, operational, support, production departments.

    Please help me how can I configure this in the system....

    please let me know custom setting and developments that are required for this....

    Thank You

    Vijay Kumar Boga

    +971551176552

    DB:2.92:Performance Appraisals Requirement 7c


    Hello Vijay,

    In performance management, there is a function called goal cascading. You can do some research on that and see if it can meet your requirement.

    Regards,

    David

  • RELEVANCY SCORE 2.84

    DB:2.84:Toolpak Summary Statistics Summary x8


    I am using the Analysis Toolpak, and trying to replicate the Confidence Level calculation that is in the "Summary Statistics" tool. Seems I should be able to replicate the numbers given other summary statistics that are displayed the summary statistics
    tool. Some explanations I found online are clearly incorrect. Are there any suggestions on how to actually calculate the confidence level summary statistic as shown in that tool?

    DB:2.84:Toolpak Summary Statistics Summary x8


    I am using the Analysis Toolpak, and trying to replicate the Confidence Level calculation that is in the "Summary Statistics" tool. Seems I should be able to replicate the numbers given other summary statistics that are displayed the summary statistics
    tool. Some explanations I found online are clearly incorrect. Are there any suggestions on how to actually calculate the confidence level summary statistic as shown in that tool?

    According to a book "Data Analysis Using Microsoft Excel" I wrote ten years ago, the Analysis ToolPak result for Confidence Level (90.0%) is

    =TINV(0.1,COUNT(DataRange)-1)*STDEV(DataRange)/SQRT(COUNT(DataRange))

    where 0.1 equals 1 - 90.0% and where DataRange is a reference to a column of sample values on a worksheet, e.g., A2:A18.

    The value the Analysis ToolPak shows for the Confidence Level (90.0%) is the half-width of a 90% confidence interval for the mean. The specified confidence level, 90% in this example, corresponds to a value of t for the t distribution with 10% in the sum of
    two tails and n – 1 degrees of freedom. The half-width of the confidence interval is t times the standard error, where the standard error is the standard deviation of the sample values divided by the square root of the sample size n.

    A 90% confidence interval for the population mean extends from the sample mean minus the half-width to the sample mean plus the half-width. Loosely speaking (but not acceptable for most classical statisticians), we can say that, based on the randomly-selected
    sample data, there is 90% chance that the unknown population mean is in such a confidence interval.

    The interval based on the Analysis ToolPak uses the t distribution because the sample data is used to estimate the standard deviation. A similar interval using the CONFIDENCE worksheet function uses the normal distribution because it assumes the standard deviation
    is known.

    - Mike Middleton, http://www.MikeMiddleton.com, http://www.TreePlan.com

  • RELEVANCY SCORE 2.80

    DB:2.80:How Do You De-Select A Numeric Control? ck



    CVI 2013SP1, Win7.

    I have a touchscreen application with a bunch of numerics on the GUI. The numeric control callback receives an EVENT_LEFT_CLICK when the operator touches a numeric. The program pops up a keypad, operator enters a number, touches ENTER, the new value is sent to the numeric control, and the popup is dismissed.

    Problem is, the numeric control is still selected. It resonds to mouse-over by selecting part of or all the numeric contents. It requires another click, or a mouse-click on another control to de-select the numeric. That's a problem.

    I have tried all of the following, and the numeric is NOT de-selected:

    SetActiveCtrl to another control on the same panel.

    SetCtrlVal to another control on the same panel

    CallCtrlCallback to the numeric control with EVENT_COMMIT

    Isn't there a simple way to de-select a control programmatically?

    (PS. It would sure be nice to be able to disable mouse-over events. Like an attribute, ATTR_DISABLE_MOUSE_OVER_EVENTS. Mouse-over events are just a pain in a touch-screen only application.)

    DB:2.80:How Do You De-Select A Numeric Control? ck


    Hello there!

    Using SetActiveCtrl on another control on the same panel should have normally changed the active control to the other control, in a regular CVI application. However, in a touch-screen environment, I suspect that the touch action of the user might prevent the other control to be activated.

    Have you checked whether after the user touches ENTER, whether activation events get continuously sent to the numeric control, thus, preventing the focus change? This is how something similar can happen in a regular CVI application (might not be very similar to your case, though):

    User activates numeric control A, by doing a right-click (doesn't let go of the click).
    In the meantime, SetActiveCtrl tries to make another control, as the active control on that panel.
    This activation change is prevented due to the fact that the user didn't let go of the control (this may be something similar to what can happen in an environment with touch support).
    The user lets go of the click.
    The first control is still the active control on that panel.

    Thoughts:

    Have you tried dimming the first control on the panel?
    Have you tried swallowing mouse events in the first control on the panel?
    Have you determined whether there are (mouse) events sent to the first numeric control that prevent the activation change (this could be probably triggered by the user touch action)? Logging such possible events may help understand the issue.

    Best regards,

    - Johannes

  • RELEVANCY SCORE 2.71

    DB:2.71:How To Check Either Numeric Or Not In Sqlloader 1j


    hi there..

    want to ask..

    in sqlloader, how we want to decode if we want to check either the data from .dat file are numeric or not. i mean, let say if numeric, we store in their field. but, if not numeric, we set null in their field..

    thanks

    DB:2.71:How To Check Either Numeric Or Not In Sqlloader 1j

    I don't know whether this facility is available with Loader or not. I am open for discussion on this.

    I have an alternative...

    1) First load the data in the table with varchar datatype.
    2) Use the following function to determine and take appropriate action.

    SQL create or replace function check_number(p_in in varchar2) return number is
    2 begin
    3 if (to_number(p_in) = p_in)
    4 then
    5 return(1) ;
    6 else
    7 return(0) ;
    8 end if ;
    9 exception
    10 when value_error
    11 then
    12 return(0) ;
    13 end ;
    14 /

    Example:

    SQL select check_number('EITA') N_OR_S from dual;

    N_OR_S
    ----------
    0

    SQL select check_number('777') N_OR_S from dual;

    N_OR_S
    ----------
    1

    I think some other good alternatives are present, But I used the above when this scenario came to me.

  • RELEVANCY SCORE 2.69

    DB:2.69:Javascript Numeric Amp; String Problem dm


    Hi everyone,
    I have a form, which takes two fields as numeric values, and
    with javascript function the sum of these two values should be
    displayed after any change. but instead of SUM , it does
    CONCATENATE on these two values. how do I tell Javascript function
    that these are numeric, not string?
    thanks for your help in advance.
    (I know it is a CF section, but I think people in CF use js
    as well)

    DB:2.69:Javascript Numeric Amp; String Problem dm

    Not so fast there. I had to develop some client side math on
    form fields once and parseInt and parseFloat were simply not good
    enough.

    What are the desired answers and expected answers for the
    following variables:

    var a = "x";
    var b = "8";

    var a = "42a";
    var b = "3";

  • RELEVANCY SCORE 2.65

    DB:2.65:[Jira] (Hhq-5481) Orphaned Measurements Are Left In The Db After Resources Are Deleted (Scaled Env) k1



    Scott Feldstein created HHQ-5481:

    -

    Summary: Orphaned Measurements are left in the DB after resources are deleted (scaled env)

    Key: HHQ-5481

    URL: https://jira.hyperic.com/browse/HHQ-5481

    Project: Hyperic HQ

    Issue Type: Bug

    Reporter: Scott Feldstein

    Assignee: Mayan Weiss

    Priority: Major

    In a scaled environment (may also be the case in a functional env) delete a platform.

    After check the db with this query:

    select count(*) from EAM_MEASUREMENT where resource_id is null;

    the result should be zero, but it is not. This causes problems over time since the EAM_MEASUREMENT gets quite large and is queried all the time.

    --

    This message is automatically generated by JIRA.

    If you think it was sent incorrectly, please contact your JIRA administrators: https://jira.hyperic.com/secure/ContactAdministrators!default.jspa

    For more information on JIRA, see: http://www.atlassian.com/software/jira

    DB:2.65:[Jira] (Hhq-5481) Orphaned Measurements Are Left In The Db After Resources Are Deleted (Scaled Env) k1


    Scott Feldstein created HHQ-5481:

    -

    Summary: Orphaned Measurements are left in the DB after resources are deleted (scaled env)

    Key: HHQ-5481

    URL: https://jira.hyperic.com/browse/HHQ-5481

    Project: Hyperic HQ

    Issue Type: Bug

    Reporter: Scott Feldstein

    Assignee: Mayan Weiss

    Priority: Major

    In a scaled environment (may also be the case in a functional env) delete a platform.

    After check the db with this query:

    select count(*) from EAM_MEASUREMENT where resource_id is null;

    the result should be zero, but it is not. This causes problems over time since the EAM_MEASUREMENT gets quite large and is queried all the time.

    --

    This message is automatically generated by JIRA.

    If you think it was sent incorrectly, please contact your JIRA administrators: https://jira.hyperic.com/secure/ContactAdministrators!default.jspa

    For more information on JIRA, see: http://www.atlassian.com/software/jira

  • RELEVANCY SCORE 2.65

    DB:2.65:Re:The Summation Values And The Group By Columns In Excel Output 7k


    hi
    i am using the Following settings

    destype=localfiledesformat=delimiteddelimited_hdr=nomimetype=application/vnd.ms-exceldelimiter=tabPARAMFORM=html

    2) Is there any settings which can help to avoid the Repeation of the Summary Columns
    (the summary column/Values should be displayed at the End when all the records
    belonging to that are displayed as we see in pdf format)

    Jai

    DB:2.65:Re:The Summation Values And The Group By Columns In Excel Output 7k

    No you will actually find the headers for the summary columns at the top of the summary column values.

    For e.g the report may look like
    empno ename sal
    100 aaa 2000
    101 bb 3000
    102 cc 2500
    sumsal
    7500

    Thanks,

  • RELEVANCY SCORE 2.65

    DB:2.65:How To Programatically Change The Pop-Up Keyboard On Tablets (Ios And Droid)? 8z


    All,One page of my app is used primarily by tablet computers (iPads and Droid devices). This particular page needs to be as UI efficient as possible. When the user taps into an item that only accepts numeric values, the app needs to pop up the numeric keyboard instead of the QWERTY keyboard. This would save one tap for each numeric item, which is important on this page. In summary, for the numeric-only items, the app will need to determine whether it's currently running on an iOS or Droid device and then pop up the numeric keyboard instead of the alphabetic keyboard. How can this be accomplished?Thanks so much,Kim

  • RELEVANCY SCORE 2.63

    DB:2.63:Numeric Format Mask fc


    Hi !

    For a numeric item I've defined a format mask '999G999G999D00'.
    For a value of 1500 the string displayed is 1,500.00 - and this is OK for user USER1.

    But user USER2 wants this value to be displayed as 1.500,00

    How can I manage this ?
    I tried it by altering session-variable NLS_NUMERIC-CHARACTERS in a logon-trigger - without success.

    Thanks,
    Heinz

    DB:2.63:Numeric Format Mask fc

    Hi Patrick !

    Thanks, using the VPD feature of Apex solves my problem.

    Greetings,
    Heinz

  • RELEVANCY SCORE 2.63

    DB:2.63:All Numeric Items Are Summing Up, Also Items Which Cannot Be Summed Up 7j


    i use numeric items (e.g. analysis #) at cross table layout at datapoint place.
    when i drill up from left axis, all numeric items are summing up, also the items which cannot be summed up - its not correct.
    how can i avoid to summary up these number colums.
    Desktop-Client 9.0.2.54.01
    Discoverer Administrator-Client 9.0.2.54.01

    DB:2.63:All Numeric Items Are Summing Up, Also Items Which Cannot Be Summed Up 7j

    Russ.

    Even if there are only few minutes difference, if have no solution in case of day-, month-, year- change.
    I think the best practice would be to display the date on one axis.

    Thanks for your help

  • RELEVANCY SCORE 2.61

    DB:2.61:Summary Display For Blog? sf


    Anyone knows how to make my wikiblog displayed with 'summary display' like 'search results' when filtered by tags? All our users cannot bear such a long list display of full articles. Further more, can I change the display line number and article numbers per page in the summary mode?

    Eric

    DB:2.61:Summary Display For Blog? sf

    Anyone knows how to make my wikiblog displayed with 'summary display' like 'search results' when filtered by tags? All our users cannot bear such a long list display of full articles. Further more, can I change the display line number and article numbers per page in the summary mode?

    Eric

  • RELEVANCY SCORE 2.60

    DB:2.60:Report With Summary Detail - Exporting To Pdf In Crystal Report z8



    Hi,

    I am using Crystal Reports XI (release 2). I am trying out a report with Summary and Detail sections.

    Requirement:

    1.Report should display both Summary and Detail Sections

    2.Summary section should be displayed first followed by Detail Section

    3.A field in summary section should have a hyperlink to Detail Section

    4.On clicking the hyperlink the user should be navigated to the corresponding detail record

    5.User should be able to download the whole report as a single PDF (i.e., both summary and detail together)

    Implementation in Crystal Report:

    This feature could be implemented using

    a.Linked On Demand Sub report

    b.Using Hide (Drill down ok) option

    c.Hyperlinks

    Issue Faced:

    I used the on demand sub report option. When i clicked on the sub report (hyperlink), the details get displayed. But the details get displayed in separate viewer and hence when we export to PDF both summary and detail are not getting exported together. User has to select each detail report and export to PDF. Is this a limitation in CR XI? - proprietary Crystal Report features, such as drill-down and on-demand subreports, are supported only in the native Crystal Report format. These special features are ignored when exporting a report to a non-Crystal format like pdf.

    Is there any workaround for exporting both the summary and detail (in subreport) as a single PDF file?

    Any help will be greatly appreciated.

    Thanks,

    Viji.

    DB:2.60:Report With Summary Detail - Exporting To Pdf In Crystal Report z8


    Hi

    Hyperlink would not be a solution to what you are asking for.

    If you want to see the records related to a particular employee id by clicking on emp id, you can try the below:

    - Apply a group on employee id on the main report.

    - Insert a subreport with the required fields and place it on the Employee id Group header. You can put a name of the subreport as "Check Employee details" or something else as per requirement and make it a on demand subreport.

    - Link the subreport on Employee id.

    Hope this helps!!!

    Regards

    Sourashree

  • RELEVANCY SCORE 2.59

    DB:2.59:Numeric Field Populates Based On Check Box 81



    I am currently using Adoboe LiveCycle Designer 7.0 trying to develop a QA scorecard.

    I need to know how to write a script so that when a checkbox is selected a numeric field returns a defined number. If the box is left uncheked the numeric field would populate with a zero.

    For example. There are 12 checkboxes. For each box checked the value displayed in the numeric field may be either 10, 20, 30, 40 etc depending on the importance of the item. Each checkbox would correspond to a QA metric. The final numeric field would simply provide a sum of the 12 other numeric fields.

  • RELEVANCY SCORE 2.59

    DB:2.59:How To Pass Numeric List To Qaaws 3s



    My question was how do you use excel to pass a numeric list to qaaws? Ex. Passing multiple month ids which are intergers in the db. Currently if I pass 456,447 it is passed as a string and not numeric.

    Thanks

    AP

    Edited by: Patil Abhijit on Feb 13, 2009 7:38 PM

    DB:2.59:How To Pass Numeric List To Qaaws 3s


    On the Data Manager definition of the QaaWS web service, select the object name for the prompt, and click on the + button below. If there is a maximum of ten values in the list, then click on the + button nine times to get a total of ten occurences of the same object name. Then associate each object occurence with a separate excel cell. You are just binding the max number of possible list values - not all values have to be populated.

    Hope this helps.

    Bobby

  • RELEVANCY SCORE 2.58

    DB:2.58:Numeric Parameter Value Format On Crystal Server 2008 13



    Question:

    Can the format of a numeric parameter be changed when it's displayed on the Crystal Server?

    Scenario:

    I create a report with a numeric parameter called 'paramNumber'. This parameter has a hard coded value of '1'

    that can be selected by the user or the user can enter a 'Custom Value'. I install the report on a Crystal 2008 Server.

    Then I right click on the report on the server and select 'Default Settings', then 'Parameters'. The screen that appears

    next is the Parameters screen. I select 'Edit' next to 'paramNumber' and select the value '1'. After selecting 'OK',

    I'm taken back to the Parameters screen where I see the value for paramNumber displayed as '1.00'. My customer wants

    this value displayed as '1' and not '1.00'. Is there any means of controlling how this value is displayed in the Crystal

    2008 Server?

    DB:2.58:Numeric Parameter Value Format On Crystal Server 2008 13


    Question:

    Can the format of a numeric parameter be changed when it's displayed on the Crystal Server?

    Scenario:

    I create a report with a numeric parameter called 'paramNumber'. This parameter has a hard coded value of '1'

    that can be selected by the user or the user can enter a 'Custom Value'. I install the report on a Crystal 2008 Server.

    Then I right click on the report on the server and select 'Default Settings', then 'Parameters'. The screen that appears

    next is the Parameters screen. I select 'Edit' next to 'paramNumber' and select the value '1'. After selecting 'OK',

    I'm taken back to the Parameters screen where I see the value for paramNumber displayed as '1.00'. My customer wants

    this value displayed as '1' and not '1.00'. Is there any means of controlling how this value is displayed in the Crystal

    2008 Server?

  • RELEVANCY SCORE 2.57

    DB:2.57:Numeric Indicator Display Format 71



    Hi,

    We are developing application using LabVIEW8.6

    In this we want to display some numeric values in following format

    For example :

    123.46 as 123,46

    We want to replace dot by comma in numeric indicator using advanced Advanced edit mode under Display Format.

    Please provide syntax todisplay required format in numeric display.

    Thanks in Advance........

    DB:2.57:Numeric Indicator Display Format 71


    LabView by default will use the decimal seperator that your OS is using. Here is link to a NI doc on Localizing VI'sthat contained these two statements.

    "By default, LabVIEW adapts to use the appropriate decimal separator on your operating system preferences, which affects the display of numbers within controls and the operation of functions that convert between numbers and strings." ( Regional settings in WinXP )

    "Select Tools»Options, select Front Panel from the Category list, and place a checkmark in the Use localized decimal point checkbox to specify whether to use the system settings (locale) for the decimal separator or a period."

  • RELEVANCY SCORE 2.57

    DB:2.57:Get Summary Urgent Help 1f



    Hello

    I am trying to develop a Get summary field (using the summary field called 'Summary Qty sum') but i want it to calculate when sorted by 2 break fields not the usual 1 break field.

    In other words:

    Instead of Getsummary (summary field ; breakfield)

    I want to Getsummary (summary field; (break field 1 ; break field 2)

    Q- How to i express this so that it will work and is it possible?

    The field names are as follows:
    summary field = SummaryQtysumbreak field 1= MANUFACTURER NUMBERbreak field 2= z_year in date

    If anyone can help asap it would be very much appreciated.

    Thanks

    danielle-gwa

    DB:2.57:Get Summary Urgent Help 1f


    What are you trying to accomplish in real-life terms? I ask because out of dozens of complete solutions I've developed, I've used GetSummary() maybe twice.

    Are you sure you need it?

  • RELEVANCY SCORE 2.57

    DB:2.57:Generic Extraction 7a



    HI,

    what are delta updates in Generic Extraction when we are using Infoset.

    Commanly when we are using View/Table in Generic Extraction delta updates displayed 1. Time stamp 2. Numeric Pointer 3. Calday.

    But when we are using Infoset in Generic Extraction delta updates displayed only 1. Time stamp 2. Calday what about Numeric Pointer.

    DB:2.57:Generic Extraction 7a


    Hi,

    Search the forum before you post a thrad, this question is already discussed.

    Check following thread,

    [Delta updates in Generic Extraction when we are using Infosets;

    Regards,

    Durgesh.

  • RELEVANCY SCORE 2.55

    DB:2.55:Numeric Value Smartforms 18



    Hi,

    In my smartforms the numbers are displayed for example '1,237.28'. I want display my numbers on format '1.237,28' or '1,237,28' how can i do?

    Thanks in advance

    DB:2.55:Numeric Value Smartforms 18


    Hi

    i want add something to ramesh's reply ..you can directly go to SU3 transaction and there click defaults tab..there you will get decimal notation ..there you can change..

    regards

    ishfaq

  • RELEVANCY SCORE 2.55

    DB:2.55:Navigation On Measures Using Go Url And Report/Subtotals cc


    Hi,
    I have a summary report with 6 measures which is subtotaled and report totaled. I want to navigate to another report by clicking on the measure value.

    I'm currently using GOURL and setting the column Data Format "Treat Text As" as HTML, I pass 5 parameters into the url for the detail report. This works perfectly for navigating.

    The problem I have is the measures do not subtotal or total as they are HTML and not numeric. How can I get the report to subtotal or is there another method to navigate and pass in parameters? I have looked at column "Value Interaction" navigation, but how do you pass in parameters?

    Any help is greatly appreciated.

    Thanks

    Phil

    Edited by: user462334 on Mar 10, 2011 5:29 PM

    Edited by: user462334 on Mar 23, 2011 3:50 AM

    Edited by: user462334 on Mar 28, 2011 6:15 PM

    DB:2.55:Navigation On Measures Using Go Url And Report/Subtotals cc

    Hi,
    I have a summary report with 6 measures which is subtotaled and report totaled. I want to navigate to another report by clicking on the measure value.

    I'm currently using GOURL and setting the column Data Format "Treat Text As" as HTML, I pass 5 parameters into the url for the detail report. This works perfectly for navigating.

    The problem I have is the measures do not subtotal or total as they are HTML and not numeric. How can I get the report to subtotal or is there another method to navigate and pass in parameters? I have looked at column "Value Interaction" navigation, but how do you pass in parameters?

    Any help is greatly appreciated.

    Thanks

    Phil

    Edited by: user462334 on Mar 10, 2011 5:29 PM

    Edited by: user462334 on Mar 23, 2011 3:50 AM

    Edited by: user462334 on Mar 28, 2011 6:15 PM

  • RELEVANCY SCORE 2.55

    DB:2.55:Multiple Numeric Limit Test Names kz


    How do I get the names of the Measurements of Multiple Numeric Limit from inside the VI that is doing the test.
    I wish to edit them to reflect the measurement that I am making.

    I can find and change the name of the step, but can't see where the name of the measurements are.

    Thanks
    Omar

    DB:2.55:Multiple Numeric Limit Test Names kz

    Guenter
    Thanks
    Exactly what I was looking for.

  • RELEVANCY SCORE 2.55

    DB:2.55:Value Vs. Description On Group-By Summary ps


    Hello,
    We have a view with a group-by Text3 which is a lookup field with lookup values and a description for each value.
    One user sees in the Group-By Summary (in the Name field) the lookup
    descriptions (which is the desired functionality) while another user sees the lookup
    values which are meaningless numeric codes. Both work with version 2010.
    How can we change for the 2nd user to see the lookup descriptions in the group-by summary tasks?
    Thanks,
    Barak

    DB:2.55:Value Vs. Description On Group-By Summary ps

    If both users are looking at the same file and see different things - there is something different in the Project installation. Are they both using the same version (Pro versus Standard)? Are they both updated with the latest service pack (SP-2)?

  • RELEVANCY SCORE 2.54

    DB:2.54:Graph Of Multiple Numeric Result Displaying Measurements And Upper And Lower Limits 7m



    Is there a way with your graph control to show all the measured values against upper and lower limits in the same graph?. I can display individual lines, but would like to show all the data on the one graph. The woefully cryptichelp files you provide with the graph control in TestStand seriously needs attention (Give examples!) also axis labelling, how is that achieved?

    DB:2.54:Graph Of Multiple Numeric Result Displaying Measurements And Upper And Lower Limits 7m


    Daniel,

    I gave the filtering a shot and it does work, much neater reports.

    However....

    I created a test sequence 3 lines/steps a For loop around a multiple numeric test and set the loop to be 10000 times.

    The Program was run and a test report was generated. It looked clean with no extra info for the For Loop and End statement. (great)

    Unfortunately the Number of Results is displayed as 30000 instead of 10000. It only displays 10000 if I disable the results recording on the For Loop steps.

    So the Test report is counting the For and End steps in the Number of Results

    Surely it shouldn't, or am I missing something?

    Regards,

    Brian

  • RELEVANCY SCORE 2.54

    DB:2.54:Where And When To Use Which Type Of Charts 3x


    Bar Chart:
    Comparisons for similar measurements

    Actual vs. Budget _ money to money, qty to qty

    Amount over time-- time to time

    Top N category values (e.g. sales reps)

    Line Charts
    Measurement to follow its movements

    Comparisons among items

    Performance Trends--- Amount movements over time

    Compare 2 dimensions-- Annual Comparisons over months

    Combo Chart
    Comparisons for multi-measurements

    Two measures --- Currency amount and quantity

    ----Amount and percentage

    Two axis----Left-axis and right axis for measurements

    Two or more axis ---- Split axis horizontally

    Radar Chart
    Comparisons of high level groups

    One or Two measurements--- Sales and Profit

    (Avoid a dimension with many values)

    Gauge Charts
    Ratio of measurements

    Percentages Margin, Quota Achieved, YTD vs. Last YTD

    (Avoid actual amounts)
    Scatter Chart
    Measurements act as dimensions (3D chart)

    3D measurement chart Amounts, quantity and # of customers

    Map chart Sales on geographical map

    Grid Chart
    2 or 3 dimensions with a measurement

    Multi-cross dim measures Amount over region and product

    over time

    Pie Chart
    Visual distribution measurements

    What contributes how to the whole Regional Sales

    Yes / No analysis

    Block Chart
    One dimension with multiple measurements

    KPI Overview Cycle group dimension with Sales, Qty, Margin

    Sort in any columns (No grouping)

    Pivot Table
    Multi-dimensions with one or more measurements

    Grouping of dimensions Product sales by item

    Dimension across table Annual sales by months

    Variance calculation using before( )

    No repetition of the same values (grouped)

    No end-user sort by double-click

    DB:2.54:Where And When To Use Which Type Of Charts 3x


    Hi rgv,

    Please close this thread by making appropriate answer if you are satisfied...

    Franois

  • RELEVANCY SCORE 2.54

    DB:2.54:Generate Two Xml Reports From Same Execution pz



    I need to generate a summary report and detail report from the same execution.

    Detail report will record all the steps marked as Record result

    Summary report to record only the steps that are of type Pass/Fail, Numeric Limit Test, MultiNumeric Limit Test and String test.

    So far I have been able to generate two detail report from same execution and can save each report in separate folder.

    How to get the data for summary versus detail report from the running sequence?




    *************************************************CLD,CTD*************************************************

    DB:2.54:Generate Two Xml Reports From Same Execution pz


    Got it...using the method Exist() and added to the step precondition. Looks something like

    Locals.CurrentElement.AsPropertyObject.Exists("TS.SequenceCall",0)

    Thanks.




    *************************************************CLD,CTD*************************************************

  • RELEVANCY SCORE 2.53

    DB:2.53:Compression Of Cube Is Failing Due To "Arithmetic Overflow Error Converting Numeric To Data Type Numeric. Row 1, Col -1. 7j



    Hi Guys,

    when I am trying to do compression for a cube I am getting the error ""Arithmetic overflow error converting numeric to data type numeric. row 1, col -1".

    Could any please help me to solve this problem. How I can compress the cube by over coming this issue.

    We are using BW 7.4 version.

    Thanks in advance.


    DB:2.53:Compression Of Cube Is Failing Due To "Arithmetic Overflow Error Converting Numeric To Data Type Numeric. Row 1, Col -1. 7j


    Hi ceenu vas,

    I have seen a similar issue in some other context.

    The one reason for this error that I Presume is that ' You have some huge values in that particular cube. When you are trying to compress that cube, the E table needs to be updated, and at that point this overflow error is coming up.

    Please see if the following notes helps you:

    460652 -- Extending Key figures in BW

    579342 -- Changing keyfigures that are used in Info providers

    BR

    Prabhith

  • RELEVANCY SCORE 2.53

    DB:2.53:Measurements zx


    How do I configure Publisher to show page sizes in centimeters?

    DB:2.53:Measurements zx

    Unless you change your region in the Control Panel, you can only change the page to centimeters per publication. Tools, Options, General Tab.

    Mary Sauer http://msauer.mvps.org/

  • RELEVANCY SCORE 2.53

    DB:2.53:Use Return Value To Make Multiple Numeric Step Pass Or Fail c8



    Hello,

    I am using a Multiple Numeric Step to check several measurements performed by an external DMM by means of a function created in CVI. I would like to use the Return value of the function to overwrite the overall status of the step. The reason is that the return value indicates a communication error whilst the measurements are taken, and that would lead to a false "False" or to a false "Pass"

    What I would liek to do is more or less this

    If return value = 0 then check if the measuremets are between the limits

    If return value != 0 there was a communication error so the step should fail regardless of the measurements.

    I tried combining the multiple numeric step with a pass/fail step but it does not work.

    I trie also to modify the status expression of the Multiple Numeric steps but basically ignores it.

    Any ideas?

    Thanks,

    Javier







    Solved!
    Go to Solution.

    DB:2.53:Use Return Value To Make Multiple Numeric Step Pass Or Fail c8


    Hi,

    Actually I though about this possibility but passing the return value as part of the measurement array.

    I just realized that you can specify the DataSource for each of the measurements, so I just need to check the return value there.

    Great answer,

    Thanks

  • RELEVANCY SCORE 2.53

    DB:2.53:Quantity, Currency And Numeric Fields Format Check 8c



    Hi,

    I have designed a Screen where I do have fields of Quantity, Currency and Numeric type.

    User can pass '/' to these fields in the screen. But as these are Quantity, Currency and Numeric type, when '/' is passed it gives error message.

    Now I have changed these fields to the CHAR type.

    But the general Validations that occurs in these Fields should be done like if we enter alphabets (a,b,c etc) error message should be displayed.

    Can anyone let me know how to check this?

    Do we have any function module?

    Regards,

    Shravan G

    DB:2.53:Quantity, Currency And Numeric Fields Format Check 8c


    Hi,

    You can achieve it like this:

    parameters: input type char10.
    data: quantity(8) type p. " here you put your actual numeric field

    at selection-screen on input.

    if input = '/'.
    * do something in case of slash - probably nothing for this is just the input check
    else.
    try.
    quantity = input.
    catch cx_sy_conversion_error.
    message 'Enter numeric value or slash'(001) type 'E'.
    endtry.
    endif.

  • RELEVANCY SCORE 2.52

    DB:2.52:How To Seperate Alpha And Numeric Portions 1d


    I have to parse an AlphaNumeric string and seperate Alphabetical part from the Numeric. The AlphaNumeric String always start with Alpha part first followed by Numeric (no spaces are involved)
    My probem is I do not know how long is the alpha part. How can I detect when the alpha portion ends and numeric portion starts so that I can seperate those two ..
    EG: BACK987
    NUM007
    AUG08
    C777

    Thanks in advance

    DB:2.52:How To Seperate Alpha And Numeric Portions 1d

    Bingo!
    I did not know how to check if a char is a digit. Now I know.
    Thank you guys.

  • RELEVANCY SCORE 2.52

    DB:2.52:Can Kinect Be Programmed To Detect Speed Of Movements, Angle Measurements Etc? j9


    Does anybody know if Kinect is programmable to be able to detect speeds of movement (eg how quick an arm swings) and other metrics such as the angle of certain body parts via skeletal trackeing. In summary, I'm trying to assess Kinect for my sports company
    in using video analysis for Golf and what capability Kinect has in this field. Speed of swing, skeletal tracking and angle measuring are all important considerations.
    Also, does anybody know of other similar projects in the sports analytics field.
    Many Thanks

    DB:2.52:Can Kinect Be Programmed To Detect Speed Of Movements, Angle Measurements Etc? j9

    I am interested in hearing from both of you. I am looking at doing something similar for other sports. Please email me.

  • RELEVANCY SCORE 2.50

    DB:2.50:Unordered List Displayed Incorrectly In Ie9 7a


    When we put in measurement in (vertical menu) ul of underordered list , it goes out of the containing box, i.e the sidebar. Firefox displayed it correctly.

    Sidebar width is 200px. ul is also 200px. but ul went outside the sidebar.

    How are measurements calculated in IE?

    DB:2.50:Unordered List Displayed Incorrectly In Ie9 7a

    Hi,

    1.What exactly are you trying to do?
    2.Do you get any error code or error message?
    3. what are you refering by "ul"?

  • RELEVANCY SCORE 2.50

    DB:2.50:Spaces In Java j8


    hi guys,

    how do i make sure there are spaces between words in my System.out.println statetments please..

    this is what i have tried but doesnt work

    System.out.println(" The measurements of the firstbox are " + awidth + aheight + adepth);

    the following code produces

    The measurements of the firstbox are 11610

    it should read 11 6 10

    any ideas folks

  • RELEVANCY SCORE 2.50

    DB:2.50:How To Get Summary Columns In Delimited Text File jj


    How to get summary columns in delimited text file

    I am trying to generate a delimited text file output with delimited_hdr = no.The report is a Group above report with summary columns at the bottom.In the text file the headers are not getting repeated thats ok.The problem is the summary data is getting repeated for each row of data.Is there a way where i will get all the data summary data will get displayed only once.I have to import the delimited text file in excel spreadsheet.

    DB:2.50:How To Get Summary Columns In Delimited Text File jj

    Shital,
    Since you seem to be on 9i, fyi delimiteddata is available only since patch 1.

    Thanks,
    The Oracle Reports Team

  • RELEVANCY SCORE 2.50

    DB:2.50:Displaying My Friend's Actual Names Instead Of Their Numeric User Names In Spotify 1z


    All my friends (logged in via facebook) are displayed with their numeric user names. How can I display my friend's actual names instead of their numeric user names?
    Do I have to adjust my Facebook Privacy Settings or is it a Spotify related issue?






    Solved!
    Go to Solution.

    DB:2.50:Displaying My Friend's Actual Names Instead Of Their Numeric User Names In Spotify 1z

    Today I was able to test it at work. Result:

    There are still only the numeric IDs.

    Well, I don't mind, there are a lot more important things at work I have to care about

    Thank you again for your support!

  • RELEVANCY SCORE 2.49

    DB:2.49:Re: 17


    I'll go to the well again. In Vcadd, when a hatched item is selected in
    a drawing, it's area and boundary measurements are immediately
    displayed. Does LT have any similar capabilities? Can the area
    measurement of a hatched item be displayed in LT?

    Sincerely,

    Rick

    DB:2.49:Re: 17

    ^C^C_area;_object;\-mtext;\@20,0;Area:;$M=$(rtos,$​(/,$(getvar,area),10000),2
    ,2) sq.m;Perimeter:;$(rtos,$(/,$(getvar,perimeter),100​),2,2) m;;

    (there is a space before the "sq.m" "m" in case your newsreader wraps the
    message.)

    As for the superscript sq.m symbol...... pass.

    Dean Griffin
    dgriffin@primus.com.au

  • RELEVANCY SCORE 2.49

    DB:2.49:Need To 'Extract' An Xml Data Node Numeric Value 88


    my question:-
    from an XML document how do I 'extract' a numeric value for
    use in a 'custom maths expression' in order to convert dimensional
    data from inches to millimeters/centimeters?

    fyi:-
    when using an XML Connector component I am able to load and
    display on-screen any XML data values, of my choosing, from the
    required XML document; the data is loaded into Components that are
    either TextArea or TextInput instances.

    background:-
    in order to make use of the displayed XML data value I have
    tried to assign it to an 'intermediate/temporary variable' by using
    the option
    ComponentInstanceName.text in an assignment but that effort
    was unsuccessful, hence this post.

    feedback:-
    any comments, suggestions, ideas are gratefully received;
    please bear in mind that a.t.m. I am a relative newb to XML but
    hope to be changing that in the coming months.

    thanks for your time.

    DB:2.49:Need To 'Extract' An Xml Data Node Numeric Value 88

    . . . and so, I've discovered that the essential reason for
    my difficulty in being able to access the data is due to the fact
    that the xml data is not fully loaded into my application when my
    code tries to access it; evidently this is due to the asynchronous
    loading behaviour of the Flash XML Connector component.

    so the remedy to the original post is:-
    check that the data is fully loaded into the app and only
    then access and assign it to any other required variables.

    SORTED :)

  • RELEVANCY SCORE 2.49

    DB:2.49:Display Vehicle Technology Tab In Ie01 jp



    Hi Experts,

    When I am creating a new Equipment using IE01 Tcode, only the following tabs are getting displayed

    General,Location,Organization and Structure.

    I want to display 3 more tabs as given below

    Structure, Vehicl ID/Measurements and Vehicle Technology tabs.

    When I use IE31 to create a fleet all the above tabs are getting displayed.

    Kindly suggest how to enable Structure, Vehicl ID/Measurements and Vehicle Technology tabs in IE01.

    Regards,

    Sam

    DB:2.49:Display Vehicle Technology Tab In Ie01 jp


    Got Solution.

    Go to equipment Master data in GENERAL data TAB eighter by IE01 while creating or by IE02 change.

    Then select the OBJECT TYPE in general data subscreen.Select only that object type which is available in IE31 in Vehicle type when you save the data you will get the viewe profile of fleet object.

    Regards,

    Sam

  • RELEVANCY SCORE 2.49

    DB:2.49:Display All Measurements In Multiple Numeric Limit Test Using Ui Seuqenceview Control mz



    Hi, I found only the total result in Multiple Numeric Limit test can be show in UI SequenceView Control. How can I display more detail information in it?

    For example, If I want to display like this:

    Mulitple Numeric Limit test FAIL

    Measurement1 PASS

    Measuremtnt2 FAIL

    Is it possible in UI sequenceview control?

    Thanks in advance

    DB:2.49:Display All Measurements In Multiple Numeric Limit Test Using Ui Seuqenceview Control mz


    You might be interested in this community example: Recursive Expression in TestStand.

    It is possible (though not traightforward) to loop in an expression using recursion. The example above shows how to use recursion in an expression to list all of the limits of a multiple numeric limit step. This is similar to what you want to do with measurements.

    I honestly think you're better off with Doug's suggestion to hard-code a maximum number of measurements to display as using recursion in expressions is not easy.




    Josh W. Certified TestStand ArchitectFormerly blue

  • RELEVANCY SCORE 2.49

    DB:2.49:Measurements 9f


    How do I change the measurement units in Outlook 2003

    DB:2.49:Measurements 9f

    I suspect you will have to change the Windows defaults to change the unit of measurement used in Outlook.

  • RELEVANCY SCORE 2.49

    DB:2.49:Raw Time-Series Data For Hardware Performance Counters 78



    Hi,

    I understand that we can get hardware performance event samples by attaching to a process. Are we able to use VTune to get the raw time-series counts of the hardware performance counters? For example, if I would like to see how the L1 cache misses change over time as I use say Internet Explorer to view a specific webpage, can we retrieve that kind of data?
    Does VTune allow us to add to the list of hardware performance events that can be monitored?
    I am trying to understand how accurate the per-process measurements are in VTune. I understand that VTune uses hardware performance counters in the CPU. Such measurements collected apply to the whole system. How does VTune differentiate the measurements from process to process?

    Thanks!

    DB:2.49:Raw Time-Series Data For Hardware Performance Counters 78


    For example, if I would like to see how the L1 cache misses change over time as I use say Internet Explorer to view a specific webpage, can we retrieve that kind of data?

    I do not think that you can obtain such a measurement granularity.Mostly you will get some kind of plot for example processor load over the time but this is measured per process and per thread.

  • RELEVANCY SCORE 2.48

    DB:2.48:[Jira] Created: (Hhq-407) Agents Having Sending Measurements Errors 93


    Agents having sending measurements errors----------------------------------------- Key: HHQ-407 URL: http://jira.hyperic.com/browse/HHQ-407 Project: Hyperic HQ Type: Task Components: Agent, Alerts Versions: 2.7.5 Environment: sles 9, running hyperic 2.7.5 Reporter: Ogilvy Assigned to: Charles Lee Some of our agents are having problems sending out measurements at times.Here's part of the agent log for one agent:2006-12-19 14:03:47,653 ERROR [SenderThread] Error sending measurements: IO error: Received close_notify during handshakeand here's another one from another agent:2006-12-19 05:49:28,297 ERROR [SenderThread] Error sending measurements: IO error: nulland another one:2006-12-19 10:49:38,561 ERROR [SenderThread] Error sending measurements: IO error: Connection reset2006-12-19 11:12:25,036 ERROR [SenderThread] Error sending measurements: IO error: nullIn the logs, these errors are usually a good 5-10 hrs apart from the daily RuntimeAutodiscoverer ones.We've set up alerts to be fired when availability of the system/platform goes below 10% for 10 minutes within 20 minutes. When we get the email alerts, we'd go and check the systems and they'd be fine.And also, when we look at HQ's charts later, we would see that an alert was fired but the availability during that time slot is still 100%.Could you tell us what's the usual cause for these errors and ways to fix them? I realize it might just be network errors as well, in that case can you suggest how we should setup our alerts so we wouldn't get these false alarms?Thanks.-- This message is automatically generated by JIRA.-If you think it was sent incorrectly contact one of the administrators: http://jira.hyperic.com/secure/Administrators.jspa-For more information on JIRA, see: http://www.atlassian.com/software/jira

    DB:2.48:[Jira] Created: (Hhq-407) Agents Having Sending Measurements Errors 93

    Agents having sending measurements errors----------------------------------------- Key: HHQ-407 URL: http://jira.hyperic.com/browse/HHQ-407 Project: Hyperic HQ Type: Task Components: Agent, Alerts Versions: 2.7.5 Environment: sles 9, running hyperic 2.7.5 Reporter: Ogilvy Assigned to: Charles Lee Some of our agents are having problems sending out measurements at times.Here's part of the agent log for one agent:2006-12-19 14:03:47,653 ERROR [SenderThread] Error sending measurements: IO error: Received close_notify during handshakeand here's another one from another agent:2006-12-19 05:49:28,297 ERROR [SenderThread] Error sending measurements: IO error: nulland another one:2006-12-19 10:49:38,561 ERROR [SenderThread] Error sending measurements: IO error: Connection reset2006-12-19 11:12:25,036 ERROR [SenderThread] Error sending measurements: IO error: nullIn the logs, these errors are usually a good 5-10 hrs apart from the daily RuntimeAutodiscoverer ones.We've set up alerts to be fired when availability of the system/platform goes below 10% for 10 minutes within 20 minutes. When we get the email alerts, we'd go and check the systems and they'd be fine.And also, when we look at HQ's charts later, we would see that an alert was fired but the availability during that time slot is still 100%.Could you tell us what's the usual cause for these errors and ways to fix them? I realize it might just be network errors as well, in that case can you suggest how we should setup our alerts so we wouldn't get these false alarms?Thanks.-- This message is automatically generated by JIRA.-If you think it was sent incorrectly contact one of the administrators: http://jira.hyperic.com/secure/Administrators.jspa-For more information on JIRA, see: http://www.atlassian.com/software/jira

  • RELEVANCY SCORE 2.48

    DB:2.48:Multiple Numeric Test Selective Measurements mx



    Hi

    Iam using a Multiple. Numeric Measurement.

    with

    Measurement A

    Measurement B

    Measurement C

    I want to be selective in which measurements I want to do. based on a Variable(bool or numeric)

    i.e based on my Select switch sometimes I wont be doing Measurement B and sometimes I would

    how can I achieve the same

  • RELEVANCY SCORE 2.48

    DB:2.48:Tracking Measurements Changes With Set Analysis: Why Not Working In A Table With More Than One Line ? zk



    We are trying to understand if a change in a measurement device affects its measurements:

    We have a table of data collection objects that collect measurements they are stored in a table like this:

    Table DataCollectObjects
    Location
    ObjectID
    DataOfReplacement
    L1
    O1
    Jan-08
    L2
    O2
    Set-07
    L3
    O3
    Ago-10

    .
    .

    The measurements that come from data collection objects are on separate table, that holds the measurements obtained each month for each location
    Table Measurements
    Location
    Value
    DataOfMeasurement
    L1
    230
    Fev-08
    L1
    340
    Mar-08
    L2
    65
    Set-10
    L2
    375
    Out-10
    L2
    44
    Nov-10
    The goal is to understand if a change of a data collection object had any influence in the measurements.

    Fist we determine the period of analysis before and after the replacement (for 3 months before):

    vPeriodBefore = '$(=Date(Monthstart(DataOfReplacement,0), 'MMM-YYYY'))$(=Date(Monthstart(DataOfReplacement,-3), 'MMM-YYYY'))'

    vAfterPeriod = '$(=Date(Monthstart(DataOfReplacement,0), 'MMM-YYYY'))$(=Date(Monthstart(DataOfReplacement,3), 'MMM-YYYY'))'

    And then we sum over that periods:
    SumBefore = =sum( {$ DataOfMeasurement = {$(= vPeriodBefore)}} Value )
    SumBefore = =sum( {$ DataOfMeasurement = {$(= vPeriodBefore)}} Value )

    The problem is that I cannot obtain a table over "Location" as dimension of SumBefore and Sum After.
    If only one Dimension is selected the values display ok. Otherwise it is simple displayed " -"

    What am I doing wrong ?

    Miguel Maia

    DB:2.48:Tracking Measurements Changes With Set Analysis: Why Not Working In A Table With More Than One Line ? zk


    Hello,

    I'm guessing It only works when one location is selected becasue, when the variables PeriodBefore and PeriodAfter are evaluated, it doesn't know which of all the possible values in DataofReplacement to take, since there are several (I think one for each location).

    Try eliminating the variable and moving the calculation into the set expression.

    SumBefore: =sum( {$ DataOfMeasurement = {"$(=Date(Monthstart(DataOfReplacement,0), 'MMM-YYYY'))$(=Date(Monthstart(DataOfReplacement,-3), 'MMM-YYYY'))"}} Value )

    Mike.

  • RELEVANCY SCORE 2.48

    DB:2.48:Sap Script: Not Able To Display First Page f8



    Hi all..

    I am facing problem in sap script.

    custom prgram is created by copying standard of F001 tcode.

    there was one variant which display all document of advanced payment and their summary on last page along with TDC.

    but for all other variants which are created only by changing program run date, only last page that is summary is displayed and first page is not displayed.

    I am not able to find due to which condition only last page is displayed.

    all data is getting populated in script throgh write_form.

    Please do needful help

    DB:2.48:Sap Script: Not Able To Display First Page f8


    Hi all..

    I am facing problem in sap script.

    custom prgram is created by copying standard of F001 tcode.

    there was one variant which display all document of advanced payment and their summary on last page along with TDC.

    but for all other variants which are created only by changing program run date, only last page that is summary is displayed and first page is not displayed.

    I am not able to find due to which condition only last page is displayed.

    all data is getting populated in script throgh write_form.

    Please do needful help

  • RELEVANCY SCORE 2.48

    DB:2.48:Issue In Printing Brought-Forward And Carry-Forward Totals In Bi Publisher 9x


    We are developing a BI Publisher invoice print report using RTF layout. This report prints the customer details at the top of the page, followed by the invoice lines' details, and a summary table (of amounts and taxes) at the bottom of the page. Brought-forward are carry-forward totals are displayed at the top and bottom of each page (in case of multi-page reports).It is important to maintain the consistency of the print format (so that the customer address is always at the top left corner of the page, summary table is always printed at the bottom etc). To print the summary at the bottom of the page for each invoice, we have used the ?start@last-page-first:body??end body? tag with section break, as recommended in the user guide. This works fine in situations when the invoice has multiple lines spilling over to the second page. However, we are facing an issue in a particular scenario : Invoice has few lines that fit in the first page itself, but there is no space left to print the summary table in the same page , so the summary table alone is printed in the second page at the bottom. In this case the carry-forward total in page 1 and the brought-forward total in page 2 are not being displayed. If you have observed a similar issue anytime please suggest how to fix this.

    DB:2.48:Issue In Printing Brought-Forward And Carry-Forward Totals In Bi Publisher 9x

    We are developing a BI Publisher invoice print report using RTF layout. This report prints the customer details at the top of the page, followed by the invoice lines' details, and a summary table (of amounts and taxes) at the bottom of the page. Brought-forward are carry-forward totals are displayed at the top and bottom of each page (in case of multi-page reports).It is important to maintain the consistency of the print format (so that the customer address is always at the top left corner of the page, summary table is always printed at the bottom etc). To print the summary at the bottom of the page for each invoice, we have used the ?start@last-page-first:body??end body? tag with section break, as recommended in the user guide. This works fine in situations when the invoice has multiple lines spilling over to the second page. However, we are facing an issue in a particular scenario : Invoice has few lines that fit in the first page itself, but there is no space left to print the summary table in the same page , so the summary table alone is printed in the second page at the bottom. In this case the carry-forward total in page 1 and the brought-forward total in page 2 are not being displayed. If you have observed a similar issue anytime please suggest how to fix this.

  • RELEVANCY SCORE 2.48

    DB:2.48:Get Numeric Values Of Word Spacing Displayed? pk



    while there are two ways to influence the word spacing (by setting the minimum, desired, and maximum values in the Justification settings, and by using the keyboard short cut increasing or decreasing word spacing), I cannot find where the resulting word spaces are displayed as numeric values. Since kerning values are easily looked into, I presume there must be a way to have the word spacing values displayed, too. But how?

    DB:2.48:Get Numeric Values Of Word Spacing Displayed? pk

    It's not a known item in Javascript -- it would need to be a private property of the Line class, as each single line has its own word spacing adjustment.
    But using two javascripts you can find out how much the space on each line is stretched or compressed.

    First, you need to know the width of a regular space in the font and size (and other parameters as well, such as tracking and horizontal scaling!). Select one single space in Left Aligned text and run this script:

    alert ( app.selection[0].insertionPoints[1].horizontalOffset - app.selection[0].insertionPoints[0].horizontalOffset);

    It will show a popup with a ridiculous exact number. Myriad Pro at 8 pts, for example, gives "0.59828389485676". Now press Ctrl+C to copy this text (I'm not sure if the Mac can do this as well!). Go to another script and paste just the number in there:
    regularWordSpace = 0.59828389485676;
    alert ( 100*(app.selection[0].insertionPoints[1].horizontalOffset - app.selection[0].insertionPoints[0].horizontalOffset)/regularWordSpace);
    If you select any justified space (again, using the same font, size, tracking, whatnot), it'll display a fairly reliable percentage, yeah, unto the seventh generation of exactitude and more.

  • RELEVANCY SCORE 2.48

    DB:2.48:How Can I Change A String To A Numeric When The Numbers Are Separated By Blank Spaces? 1f


    I would like to change a list of numbers in string to a list of number in numeric like in the attached vi. Unfortunately, the numbers are not separated by commas but by blank spaces. Which character can I use for the blank space?Ninskaya









    Attachments:







    readcommdelim.vi ‏19 KB

  • RELEVANCY SCORE 2.48

    DB:2.48:Quadrature Encoder Measurements With Scxi-1600? 1z



    Hello everyone,

    With our current data acquisition system (SCXI-1600 and SCXI-1141 in SCXI-1000 chassis) we are able to measurevoltage signals.

    How can weupgrade this measurement environment so we are abletodo quadrature encoder measurements simultaneously with the voltage signals?

    Best regards,

    Frederic

    DB:2.48:Quadrature Encoder Measurements With Scxi-1600? 1z


    Dear Frederic,

    As this is a more sales-related question, it's the best for you to contact our sales department.

    You can find all the information on the following page: http://belgium.ni.com/contact

    Best regards and have a nice day,

    Nico

  • RELEVANCY SCORE 2.48

    DB:2.48:Stack Overflow And Memory Corrupt When Use Dsbrowsecontainer md


            [DllImport(dsuiext.dll, CharSet = CharSet.Unicode, SetLastError = true)]        public static extern int DsBrowseForContainer(IntPtr infoHandle);
    public delegate int BffCallBack(IntPtr handle, uint message, IntPtr param, IntPtr data);
    [StructLayout(LayoutKind.Sequential)]        public struct DSBrowseInfo : IDisposable        {            /// summary            /// size of structure in bytes            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int size;
                /// summary            /// dialog owner            /// /summary            public IntPtr handle;
                /// summary            /// dialog caption text (can be NULL)            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string caption;
                /// summary            /// displayed above the tree view control (can be NULL)            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string title;
                /// summary            /// ADS path to root (NULL == root of DS namespace)            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string root;
                /// summary            /// [in/out] initial selection and returned path (required)            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string path;
                /// summary            /// size of path buffer in characters            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int pathBufferSize;
                /// summary            /// Flags            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int flags;
                /// summary            /// callback function (see SHBrowseForFolder)            /// /summary            [MarshalAs(UnmanagedType.FunctionPtr)]            public BffCallBack callback;
                /// summary            /// passed to pfnCallback as lpUserData            /// /summary            [MarshalAs(UnmanagedType.I4)]            public int userData;
                /// summary            /// ADS_FORMAT_* (default is ADS_FORMAT_X500_NO_SERVER)            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int returnFormat;
                /// summary            /// Username to authenticate against DS with            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string userName;
                /// summary            /// Password to authenticate against DS with            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string password;
                /// summary            /// NICODE string for the object class            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string objectClass;
                /// summary            /// size NICODE string for the object class            /// /summary            [MarshalAs(UnmanagedType.U4)]            public uint objectClassSize;
                /// summary            /// Dispose of DSBrowseInfo            /// /summary            public void Dispose()            {                GC.SuppressFinalize(this);            }        }
    [StructLayout(LayoutKind.Sequential)]        public struct DsbItem : IDisposable        {            /// summary            /// size of structure in bytes            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int Size;
                /// summary            /// ADS paths are always Unicode            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string AdsPath;
                /// summary            /// ADS properties are always Unicode            /// /summary            [MarshalAs(UnmanagedType.LPWStr)]            public string ObjectClass;
                /// summary            /// Mask            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int Mask;
                /// summary            /// State            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int State;
                /// summary            /// State Mask            /// /summary            [MarshalAs(UnmanagedType.U4)]            public int StateMask;
                /// summary            /// Display name[64]            /// /summary            [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 64)]            public string DispalyName;
                /// summary            /// Icon Location[260]            /// /summary            [MarshalAs(UnmanagedType.ByValTStr, SizeConst = 260)]            public string IconLocation;
                /// summary            /// Icon resource ID;            /// /summary            [MarshalAs(UnmanagedType.I4)]            public int IconResID;
                /// summary            /// Dispose of DSBrowseInfo            /// /summary            public void Dispose()            {                GC.SuppressFinalize(this);            }        }
     
    Above is the key codes. Sometimes it can work fine, but sometismes it will crash with the following exceptions.
    1. Cannot evaluate expression because the current thread is in a stack overflow state
    2. Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
     
    I don't know why? I think if there is something wrong with the definition of structures or methods or other errors.
    Thanks a lot.

    DB:2.48:Stack Overflow And Memory Corrupt When Use Dsbrowsecontainer md

    Can you post the full working code? i need it working on 32 and 64 bits, thankswww.josenet.com

  • RELEVANCY SCORE 2.48

    DB:2.48:Action Link (Bi Content) Implementation Question. kd


    Hi,I have a summary and a detail analysis. I want to navigate from the summary to the detail analysis when users click measurements. No issues so far.As a standard, all the summary analyses have only two dimensions at a time based on user selection (the users will select two dimensions they want to view the measurements' data by).The summary report is based on count of rows. The counts are derived counts, for example, Flights Arrived, Flights Departed, Flights Cancelled where the derived columns are defined based on Filter (Filter Bag Count where flight status = 'Arrived', for example).If flight status is not selected by the user as a dimension on a dashboard page, how do I filter the detail analysis on the flight status dimension. For example, a user selects Day and Airport as dimensions to analyse the above measurements, and clicks a Fligts Arrived cell value, the detail analysis should only show details for Flights that "arrived" at an airport on a given day (as per the summary). Currently, the detailed analysis is showing all flights (arrived, departed, cancelled) for the airport on the given day.Any ideas, please, on how to filter on flight status?Regards,Manoj.

    DB:2.48:Action Link (Bi Content) Implementation Question. kd

    Hi,Try by keeping default filter value in Detail Report.AjitR

  • RELEVANCY SCORE 2.47

    DB:2.47:How Do I Change The Ruler And Other Measurements From Centimeters To Inches In Word z7


    I just got Word 2010 and want to change the ruler and any other measurements that are in centimeters
    to inches. Can't figure out how to do this.
    Thanks.

    DB:2.47:How Do I Change The Ruler And Other Measurements From Centimeters To Inches In Word z7

    Thank you very much, Jeeped. I followed your instructions and they worked perfectly!

  • RELEVANCY SCORE 2.47

    DB:2.47:How To Merge Several Signals To One Display? f9


    I am trying to merge several signals and send it to one display with time dellay. For example, have a tree of three numeric constants n1, n2, and n3, merging to one numeric display. At time t0 number n1 is displayed in numeric display. At time t1 (a second later) n2 is displayed in the same numeric display. At time t2 number n3 is displayed in the same numeric display. Etc.

    DB:2.47:How To Merge Several Signals To One Display? f9

    Johnsold, you made my day. I give you 5 starts. That's exactly what I needed. Thanks!

  • RELEVANCY SCORE 2.47

    DB:2.47:Entering Data In A Datatable mp


    Hi,

    I have a scenario where the user enters search criteria and then a summary page is displayed. The summary page shows the data using h:dataTable.

    Now in the datatable I have 2 coulms. The first column is displayed using the fields that were fetched from the EJBs.

    The second column has text fileds that the user will enter and then again do a submit so that the new values entered in the second column can be updated in the Database.

    Can anyone tell me how can I set the values of the second column text fields in my backing bean as the number of rows in the datatable are dependent on the number of rows found in the Database, so I cannot really give something like - value = "#{myBackingBean.textField1}" value = "#{myBackingBean.textField2}" and so on.

    My current code is:

    h:form id="frmManualDataEntryDeliverCode"
    tr:panelHeader styleClass="titleText" text="Enter Deliverability Code"/
    h:dataTable rows="5" rowClasses="oddRow,evenRow"
    styleClass="columnSpace font_size" value="#{keylineList}"
    var="summary"
    h:column
    f:facet name="header"
    h:outputText styleClass="titleText" value="Keyline"/
    /f:facet
    h:outputText rendered="#{summary[0]} != null"
    value="#{summary[0]}"/
    f:verbatim
    br/
    /f:verbatim
    h:outputText rendered="#{summary[1] != null summary[1] != \'Not Found\'}"
    value="#{summary[1]}"/
    f:verbatim
    br/
    /f:verbatim
    h:outputText rendered="#{summary[2] != null summary[2] != \'Not Found\'}"
    value="#{summary[2]}"
    f:verbatim
    br/
    /f:verbatim
    /h:outputText
    h:outputText rendered="#{summary[3] != null summary[3] != \'Not Found\'}"
    value="#{summary[3]}"
    f:verbatim
    br/
    /f:verbatim
    /h:outputText

    /h:column
    h:column
    f:facet name="header"
    h:outputText styleClass="titleText"
    value="Deliverability Code"/
    /f:facet
    h:inputText styleClass="extraPadding" maxlength="1" size="1" value="updateAddressBean.updateAction"/
    /h:column
    /h:dataTable
    /h:formWhat should I do such that the values can be entered in the backing Bean, because as you can see the inputtext field will be only displayed as the number of rows the datatable has.

    DB:2.47:Entering Data In A Datatable mp

    Hi,

    Try this :

    h:form id="frmManualDataEntryDeliverCode"
    tr:panelHeader styleClass="titleText" text="Enter Deliverability Code"/
    h:dataTable rows="5" rowClasses="oddRow,evenRow"
    styleClass="columnSpace font_size" value="#{keylineList}"
    var="summary"
    h:column
    f:facet name="header"
    h:outputText styleClass="titleText" value="Keyline"/
    /f:facet
    h:outputText rendered="#{summary[0]} != null"
    value="#{summary[0]}"/
    f:verbatim
    br/
    /f:verbatim
    h:outputText rendered="#{summary[1] != null summary[1] != \'Not Found\'}"
    value="#{summary[1]}"/
    f:verbatim
    br/
    /f:verbatim
    h:outputText rendered="#{summary[2] != null summary[2] != \'Not Found\'}"
    value="#{summary[2]}"
    f:verbatim
    br/
    /f:verbatim
    /h:outputText
    h:outputText rendered="#{summary[3] != null summary[3] != \'Not Found\'}"
    value="#{summary[3]}"
    f:verbatim
    br/
    /f:verbatim
    /h:outputText

    /h:column
    h:column
    f:facet name="header"
    h:outputText styleClass="titleText"
    value="Deliverability Code"/
    /f:facet
    h:inputText styleClass="extraPadding" maxlength="1" size="1" value="#{summary[4]}"/
    /h:column
    /h:dataTable
    /h:formand in your backing bean you can retreive the value entred in the 'summary' array

  • RELEVANCY SCORE 2.47

    DB:2.47:Fleet Object Tabs W.R.T A Material ks



    Hello Experts,

    We are using fleet management and we create the equipment using transaction code IE31. We have made the neccessary settings in the IMG and are getting the tabs 'Vehicle Technology' and 'Vehicle ID / Measurements' displayed with the fields. We are able to see these tabs and fields in change / display mode as well.

    But the problem is, when we create an equipment with reference to a material, we are getting the those tabs and fields, but in change / display mode those tabs and fields are not displayed.

    Can you please let us know how to overcome this problem?

    Thanks,

    Balaji

    DB:2.47:Fleet Object Tabs W.R.T A Material ks


    Balaji,

    Have a look at the settings in you View Profile which is assigned to the equipment category.

    PeteA

  • RELEVANCY SCORE 2.47

    DB:2.47:8 Significant Digits c8


    Im using two different numeric factors (in a VI)that I store in text fles. A few times an hour theese factors are collected (read from file into VI)for comparison.
    The factors are enteredmanualy via an numeric controler.

    Here's the thing... The numeric factors should have good precision, like "20,03581973". How do I configure the VI to save all 8 decimals?

    By default t only saves 4 decímals

    DB:2.47:8 Significant Digits c8

    Hi Jason,Use a custom probe. Right Click the wire Custom Probe NewCreate a new probe, don't work from a template, place down a numeric control right-click the control Format and Precision 8 SFThe VI will save to My Documents LabVIEW Data ProbesYou can then select this probe from Custom Probe (Probe Names)I attach a custom probe, try adding it to your My Documents LabVIEW Data Probes and see if it is incuded in your probe list, you might need to restart LabVIEW 8RegardsJamesCNIUK and Ireland
    Message Edited by JamesC on 08-01-2006 04:09 PM










    Attachments:






    Custom DBL 8SF.vi ‏7 KB

  • RELEVANCY SCORE 2.47

    DB:2.47:Make Metrics The Default Measurement For Environment zx


    How do I set the default settings for all reports to be A4 using metric measurements. We never use Legal Letter and although I know how to convert imperial measurements to metric measurements, imperial measurements were fazed out over 30 years ago.
    Also how do I change the default field size settings to use metric. I have changed my report properties to be A4 and metric measurements, but all the fields are still displaying size in imperial measurements.

    DB:2.47:Make Metrics The Default Measurement For Environment zx

    Hi,
    You can submit a feedback at
    https://connect.microsoft.com/SQLServer/Feedbackand hope it can be added in the next release.
    thanks,
    Jerry

  • RELEVANCY SCORE 2.47

    DB:2.47:Selling Manager - Sold Items In Numeric Order jp


    How can the SOLD ITEMS be put in numeric order? They are in alphabetic now.

    DB:2.47:Selling Manager - Sold Items In Numeric Order jp

    How can the SOLD ITEMS be put in numeric order? They are in alphabetic now.

  • RELEVANCY SCORE 2.47

    DB:2.47:Pls Explain Me About 0bpartner_Attr kk



    Hi All,

    I have a data source - 0BPARTNER_ATTR.( below fields are in the data source)

    In that I have fields like

    Category

    Role

    Type

    Title

    First Name

    Last Name

    My requirement is , I want to extract only the above fields in to BI system and I want to take 0BPARTNER- Info object and I want to change as Infoprovider and load data.

    Pls guide me how to go proceed further.

    Below are the requirement fields which I got from client.

    Category is Numeric

    Role isAlpha Numeric

    Type isAlpha Numeric

    TitleisAlpha Numeric u2013 length should be 15.

    First Name isAlpha Numeric u2013 length should be 15.

    Last Name is Alpha Numeric u2013 length should be 15.

    Regards,

    Nithi.

    Edited by: Nithi babu on Nov 13, 2008 11:53 AM

    Edited by: Nithi babu on Nov 13, 2008 11:53 AM

    Edited by: Nithi babu on Nov 13, 2008 11:54 AM

    DB:2.47:Pls Explain Me About 0bpartner_Attr kk


    HI

    Activate datasource 0BPARTNER_ATTR in R/3 on RSA5 transaction then install 0bpartner infoobject and transfer rules from business content and Map the listed fields and unmap the remaining fields and activate the TR.

    To change infoobject as infoprovider,goto change mode on 0bpartner then on Masterdata/text tab you can see the option 'Char is infoprovider.Enable the radio button.

    Regards,

    Chandu.

  • RELEVANCY SCORE 2.47

    DB:2.47:Wp Not Displaying Summary For Read Users? za


    Edited a Web Part file to add a SUMMARY tag that I in turn displayed by creating a Template in Item Style accessed through Presentation. It's called Title_Summary.
    Admin site users are able to see the SUMMARY tag properly: the linking Title displays, along with the Summary text of the List Item.
    However, READ users only see the linking Title.
    Why would the displays be different for ADMINs and READs?
    Note: the links work properly: it links to the List Item, where the TITLE, BODY, and SUMMARY are visible to the READ user.
    Thanks!

    DB:2.47:Wp Not Displaying Summary For Read Users? za

    Hi,

    Whats the webpart, custom webpart?
    You mentioned Item Style, it seems you are using the content query webpart.
    (If I misunderstood you, please let me know)

    For your issue, you also need publish all supported files like Item Style file.
    The Reader cant see the draft version file.

    Hope this helps

    Thanks!
    Stanfford

  • RELEVANCY SCORE 2.47

    DB:2.47:Wbs Element 93


    Hi all, I have displayed WBS element in ALV Grid display. When I use filter condition for this field it displays a message to enter a numeric field. and when I check in table it is numc and while displaying the records are alpha numeric with many characters.please help how to solve this in ALV grid filter. I am sure to reward points.

    DB:2.47:Wbs Element 93

    Instead of PSPNR field use POSID while creating ALV field catalog in your abap code.Message was edited by: Tomasz Kozerski

  • RELEVANCY SCORE 2.47

    DB:2.47:Calculated Columns In Rtf Template dc


    Hi ,

    I have a multi group report having 2 numeric columns ( N1 , N2) and report has group wise totals for the 2 numeric colums.

    But I also need to display difference of the 2 summary columns. How can I achieve this. I tried using ?xdofx:SUM_ENT_AMT+SUM_PROJ_AMT)?

    Thanks,

    DB:2.47:Calculated Columns In Rtf Template dc

    ?10-5?
    ?10+5?
    Numbers works like this.
    so, if you have element name like
    SUM_ENT_AMT and SUM_PROJ_AMT in your xml under same node,
    then
    ?SUM_ENT_AMT-SUM_PROJ_AMT? will work.

    i doubt in your grouping and the i suppose , both these element are in under different nodes.
    so without your xml , and the rtf xsl code , its difficult to help you.

    if possible drop me a mail, with xml and template to fusionDOTobjectATgmailDOTcom

  • RELEVANCY SCORE 2.46

    DB:2.46:Auto-Summary 9k



    what is mean by auto summary? how to it work ? in routing protocol please explain briefly

    DB:2.46:Auto-Summary 9k


    hello,

    just some more details to what Edi already said.

    auto-summary is used by default by Distance Vector routers and happens at a major network transition. If you have a router that have the DV IGP running on interfaces with ip addresses belonging to two different major networks (example 10.0.0.0/8 and 172.16.0.0/16) when preparing the updates to send out an interface that is part of major network 2 it will send out the classful major network instead of the known subnets in major network 1 and viceversa out of an interface thar is part of major network 1 it will send out a single entry major_net2.

    This behaviour can be a problem if you have used subnets of a major network on different remote sites (for example you use some 10.x.y.0 prefixes on the client lan and you use on the wan links subnets in class 172.16.x.y) and you want from the central site to know the details for correct forwarding.

    RIPv2 and EIGRP allows to disable auto-summary feature.

    Old protocols like RIPv1 and IGRP have the problem that they do not send the prefix mask in their updates.

    Hope to help

    Giuseppe

  • RELEVANCY SCORE 2.46

    DB:2.46:How To Format A Textbox Dynamically? 3a



    Hi everybody,
    I am a beginner on WPF. I am working on an application which has a virtual numeric keyboard. As the user types in the numbers, these are displayed in a text box. My requirement is to display the numbers that have been keyed in by the user in money format.
    How can I achieve this?
    Thank you in advance for any help.
    Duan Brito - Analista de Sistemas/Programador

    DB:2.46:How To Format A Textbox Dynamically? 3a

    Hello,
    This code solve the problem:

    private void btnTeclado_Click(object sender, RoutedEventArgs e)
    {

    txtValor.Text += ((Button)sender).Content.ToString();

    if (txtValor.Text.Length == 1)
    {
    txtValor.Text = 0,0 + txtValor.Text;
    }
    else
    {
    decimal valor = Convert.ToDecimal(txtValor.Text) * 10;
    txtValor.Text = valor.ToString(N2);
    }
    }

  • RELEVANCY SCORE 2.46

    DB:2.46:Binding A Floating Numeric Keypad To A Usercontrol On A Window 73


    Hi,
    This is w.r.t binding a floating numeric keypad to a usercontrol on a window.
    I have my requirement like this.
    I have Main window and three user controls say OrderOverview,OrderDetail and OrderSummary.
    On opening the Main window the OrderOveriew is displayed to the user. Now clicking on button in the OrderOverview will display OrderDetail in front of OrderOverview. Similarly clicking on button in the OrderDetail will display OrderSummary
    in front of Orderdetail.
    Now in the menu list we can view all the opened Usercontrols. We can navigate to any Usercontrol by selecting the corresponding user control. Ex: suppose the active(Visible usercontrol) user control is OrderSummary. Now if the user wants to view OrderOverview
    he can do so by selecting the menu item OrderOverview In the OrderDetail I have placed some numeric input fields. The numeric values needs to be input through the numeric keypad which can float over the OrderDetail user control. For this, we have created UserControl
    NumericKeypad this keypad can be invoked by clicking on the button in the Order Detail screen.
    Question:
    We are able to open the numeric keypad and input values into the OrderDetail User control input fields. When we navigate to OrderOverview ,The OrderOverview is bought to front.
    This is ok.
    Now, if we again go back to OrderDetail usercontrol the numeric keypad is not visible. How can we bind the numeric keypad usercontrol only to OrderDetail Usercontrol such that whenever the user opens the OrderDetail usercontrol the Numeric keypad should
    also be visible.

    DB:2.46:Binding A Floating Numeric Keypad To A Usercontrol On A Window 73

    Hi Bhanu016,
    Based on your description, it is hard to understand your situation clearlywithWPF concept, I guess if it is Windows Phone7, I need your feedback to help you further.

    Best regards,Sheldon _Xiao[MSFT]
    MSDN Community Support | Feedback to us
    Get or Request Code Sample from Microsoft
    Please remember to mark the replies as answers if they help and unmark them if they provide no help.

  • RELEVANCY SCORE 2.46

    DB:2.46:How Can I Get The String Value Displayed On A Numeric Control That Is Set For Relative Time. cz



    I have a numeric control set to display relative time in 30min increments.

    I want to record the value displayed on the control as a string. Unfortunately, when I use the "convert number to decimal string.vi", the resulting string is just the value in seconds.

    How can I get the displayed value as a string? (i.e. 1:30 for one hour and thirty minutes)

    Thanks,

    Sean







    Solved!
    Go to Solution.

    DB:2.46:How Can I Get The String Value Displayed On A Numeric Control That Is Set For Relative Time. cz


    Hi gstanczak,

    can you post what you tried? Take a look at the Help on Format Into String Function- there's a link under the format string input to the Format Specifier Syntax page (link says "format string") Using this reference will help you get the string you are looking for.

    Kristen H.

  • RELEVANCY SCORE 2.46

    DB:2.46:Help With Summary Field In Report Footer c3



    Hello All,

    I have a crystal report which consists of total 8 pages. And on page 9 I want to show only the grand total without displaying anyother information. So my report will have 9 pages all together.

    When I am adding a summary field (distinct count) in the Report Footer its getting displayed on the page 9 but along with column headings(which are in Page Header)

    How can I achieve this by keeping the column headings in Page Header itself.

    Any help is greatly appreciated.

    Thank You!

    DB:2.46:Help With Summary Field In Report Footer c3


    Yes, anywhere you see a suppress formula, you can add that. If you did not want to suppress the whole page footer, then right click the image itself and suppress with the same formula.

  • RELEVANCY SCORE 2.46

    DB:2.46:Evaluating Nan Comparison Type In Teststand Numeric Limit Step ad


    I'm using a 4070 DMM to return Resistance Measurements to a TestStand numeric Limit step. How can I use a comparison type when the LabView vi returns NaN (Not a Number). I want the step to pass as long as the Resistance Measurement is GT some value.

    DB:2.46:Evaluating Nan Comparison Type In Teststand Numeric Limit Step ad

    I have the same situation. Here is my solution:I use a Numeric Limit test with the following settingsComparison Type: LEGE (= =)Measurement Must Be: = NaN Or = {insert value here}This works just like "Locals.x 10 || Locals.x == NAN", since the NaN treats the '=' as a '='(less than OR equal to).

  • RELEVANCY SCORE 2.46

    DB:2.46:Help With Building A Logging Vi For Strain Measurements With Crio a1



    Hi all,

    I'm an engineering student currently working on my thesis project which includes measuring some frame stresses from truck trailers. However I'm unfortunate enough not to have any experts at my school on Labview since the only teacher who has been doing programming with it left on a work trip for three months and my measurements are already due next week. He got me started with my coding but to be frank, I'm still quite puzzled by Labview since I haven't been using it at all before.

    My equipment for the measurements are cRio 9022 with universal analog module 9219 and strain gage module 9235. The measurement is currently done as a state machine which monitors the gage signals and initiates the measurement if the signal passes a certain treshold. After that it should log the results combined with date time as a spreadsheet file to a connected USB stick. So basically nothing more fancy than data logging.

    My most pressing questions are that how am I able to know what is the excitation voltage coming from the above mentioned modules? As attached in the screenshot below (Presence_detection), I have displayed the reading from the modules before conversion to stress but the readings make no sense since they say only 0,0029 Volts or so. 9235 excitation voltage should be 2 volts and for 9219 50 mV - I don't even know if this is enough to get reliable readings? Also 9235 module has an internal shunt calibration but I don't know how to operate it - it should be done somehow with the software, I think?

    I would also like to have help with writing the spreadsheet file to the USB since I have absolutely no idea how it should commence. My desire is to have a new spreadsheet created every 30 mins to one hour so that the size of the file wouldn't grow into too big (with sampling rate of 10 hZ).

    I appreciate all the help I can have, I have watched all the educational tutorials here on NI page and they clarified some stuff for sure. It is just difficult to make sense of things since I haven't found any similar example with cRio and strain measurements and since the Labview environment is not that familiar to me.

    -Kalle Seppala










    Attachments:







    Presence_detection.JPG ‏173 KB

    DB:2.46:Help With Building A Logging Vi For Strain Measurements With Crio a1


    Hi Kalle,

    the manual is always right - as long as not stated otherwise…

    So yes, you will have an excitation of 50mV.




    Best regards,GerdWCLAD, using 2009SP1 + LV2011SP1 + LV2014f1 on WinXP+Win7+cRIOKudos are welcome

  • RELEVANCY SCORE 2.45

    DB:2.45:Display Step Result In Ui Sequenceview Control After It's Executed f3



    Hi, I add the one column and want to display the step result in SequenceView control. The result should be display depends on the steptype, if it's Numeric, then result is a number, if it's a string, then result is a string, etc. How can I do this?

    Currently, I found I can check whether the property exits like

    PropertyExists("ThisContext.Step.Result.Numeric")? ThisContext.Step.Result.NumericropertyExists("ThisContext.Step.Result.String")? ......

    However, this will cause the all the step result are displayed even it's not executed. How can I only display it after the step is finished?

    By the way, How can I also display the Limits(Low and High) for Numeric step if I add a new column?

    Thanks in advance

    BR

    Gavin Chen

  • RELEVANCY SCORE 2.45

    DB:2.45:[Feature Request] Apply All (Or Similar) Advisories Automatically 3x


    Hi,

    In the Source panel that shows all the advisories, it is great that you can right-click and fix them one at a time.

    It would be better if you could [highlight them all|http://imgur.com/yWfao.png] (or at least all the similar issues) and fix them all at once.

    Also, the documentation regarding Advisories does not actually tell you how to open the advisories panel. It reads:

    "Audit reports are displayed as tabbed panes of the Log window. Use the audit report to investigate and correct rule violations and over-threshold measurements."

    The help should actually tell you: (1) How to open it. (2) What it looks like when it is open.

    Edited by: Dolphin on Aug 1, 2009 5:07 PM

    DB:2.45:[Feature Request] Apply All (Or Similar) Advisories Automatically 3x

    Hi,

    In the Source panel that shows all the advisories, it is great that you can right-click and fix them one at a time.

    It would be better if you could [highlight them all|http://imgur.com/yWfao.png] (or at least all the similar issues) and fix them all at once.

    Also, the documentation regarding Advisories does not actually tell you how to open the advisories panel. It reads:

    "Audit reports are displayed as tabbed panes of the Log window. Use the audit report to investigate and correct rule violations and over-threshold measurements."

    The help should actually tell you: (1) How to open it. (2) What it looks like when it is open.

    Edited by: Dolphin on Aug 1, 2009 5:07 PM

  • RELEVANCY SCORE 2.45

    DB:2.45:Vertical/Horizontal Measurements In Pse11 87



    I am trialling PSE 11 at the moment. In my current versions of PSE 5 and 8 I am able to increase the size of a layer using the move tool and the vertical and horizontal measurements are shown in percentage values. I scrapbook digitally and sometimes need to increase the size of layers by exact same amount, so noting these values is helpful. I do not see these measurements show up in PSE 11. Is anyone able to help please?

    Feeling rather silly as I have now discovered these measurements. Moving on......

  • RELEVANCY SCORE 2.45

    DB:2.45:Where Do You Store Your Important Notes? 3j


    I have an old Palm Vx (Windows Version) where I store important notes like measurements for a furnace filter, meal recipes, etc. in the Palm software memo pad applet. Each memo is titled by the first line of text in the memo. The memos are listed in order of entry and displayed by title in a "right side" viewing pane where the preview of the selected memo is on the left side. I'm able to search these memos easily similar to spotlight.

    I'd like to copy these memos into separate and searchable files or a similar memo pad applet that is offered in Leopard. It would be nice to password protect this info and possibly sync it to an iPhone.

    I appreciate any thoughts or how one organizes such data that can be listed and searched easily, synced to an iPhone, and possibly password protected.

    Thanks in advance!

    DB:2.45:Where Do You Store Your Important Notes? 3j

    I have an old Palm Vx (Windows Version) where I store important notes like measurements for a furnace filter, meal recipes, etc. in the Palm software memo pad applet. Each memo is titled by the first line of text in the memo. The memos are listed in order of entry and displayed by title in a "right side" viewing pane where the preview of the selected memo is on the left side. I'm able to search these memos easily similar to spotlight.

    I'd like to copy these memos into separate and searchable files or a similar memo pad applet that is offered in Leopard. It would be nice to password protect this info and possibly sync it to an iPhone.

    I appreciate any thoughts or how one organizes such data that can be listed and searched easily, synced to an iPhone, and possibly password protected.

    Thanks in advance!

  • RELEVANCY SCORE 2.45

    DB:2.45:Retrive The Names Of Step Measurements Using Labview fm



    How do you retrieve the names of a multiple numeric step's measurements using LabVIEW?

    I've constructed a vi to call from TestStand, and will pass it "ThisContext", but the vi doesn't complie. That's how far I got. The vi is attached. The error message is:

    "The method selected in the invoke node is invalid or no method has been selected. Right-click the invoke node and select a method."

    My vi is an attempt to write the code from

    message.id=10653 in LabVIEW. Specifically:

    Dim MyStep As [Step]
    Dim MyMeasurement As PropertyObject

    MyStep =
    seqContext.AsPropertyObject.GetPropertyObject("Step", 0)
    MyMeasurement =
    MyStep.AsPropertyObject.GetPropertyObject("Result.Measurement[0]", 0)

    MsgBox(MyMeasurement.Name)

    Can someone help me finish the vi?

    Thanks







    Solved!
    Go to Solution.

    DB:2.45:Retrive The Names Of Step Measurements Using Labview fm


    Thanks very much.

    One small change to the vi required.










    Attachments:







    Dev-GetMeasurementName.vi ‏12 KB

  • RELEVANCY SCORE 2.45

    DB:2.45:How To Set Ts Pass/Fail Status For Numeric Limit Test pf



    Hi,

    I have 16 measurements all of which use the same limits. I have tried to put a single test within a loop as follows

    I change the step.name based on the loop count so that the report gives the correct channel number for a failure as follows;

    Inside post-expression

    Step.name = "PXI-6704 test 20mA Channel ao"+Str(Locals.LocalNumber/3+16),

    (I am using Locals.LocalNumber as my loop counter)

    The problem I have is that the final pass/fail status in the trace window always shows the result of the last test so if an earlier test fails but the last test passes it shows a pass. I think if this was a PassFail test I could manipulate step.result.passFail to change the status in the trace but I don't see how to do this with a numeric limit test.

    I tried using the loop facility within a step but this always gives a header in the report file thast makes it look as if the last test failed when it didn't as shown below;

    (couldn't post as message got too big)

    The above shows fail but it should show pass as 9 is GT 4. In fact it is trying to show a summary of the loops. Is there a way to surpress this summary output or any other way to do what I want. As a workaround I am jumping out of the loop on first fail but then I miss reporting any further failures.

    Thanks

    Andy







    Solved!
    Go to Solution.

    DB:2.45:How To Set Ts Pass/Fail Status For Numeric Limit Test pf


    It looks like this post was created in error. If not, could you clarify what you're referring to?




    Frank L.Software Product ManagerNational Instruments

  • RELEVANCY SCORE 2.45

    DB:2.45:Displaying Customized Text Of A R/3 Domain fk



    Hi,

    currently I am trying to display business data in a table. Some of my column values are based on customized R/3 domain values and texts. Displaying those values as a DropDown-Element fails for some reason. If I switch to a simple InputField or TextView only numeric values are displayed. But I would rather prefer their textual representations to be displayed. Astonishingly, this works fine for domain types whose values are specififed as part of the domain type definition (no explicit customization).

    Additionally CURRENCY typed fields are also displayed correctly.

    So any idea how to proceed here...PLEEEEAAAASE.

    Regards

    Metin

    Message was edited by: Metin Gktay

    DB:2.45:Displaying Customized Text Of A R/3 Domain fk


    Hi,

    currently I am trying to display business data in a table. Some of my column values are based on customized R/3 domain values and texts. Displaying those values as a DropDown-Element fails for some reason. If I switch to a simple InputField or TextView only numeric values are displayed. But I would rather prefer their textual representations to be displayed. Astonishingly, this works fine for domain types whose values are specififed as part of the domain type definition (no explicit customization).

    Additionally CURRENCY typed fields are also displayed correctly.

    So any idea how to proceed here...PLEEEEAAAASE.

    Regards

    Metin

    Message was edited by: Metin Gktay

  • RELEVANCY SCORE 2.45

    DB:2.45:Testing Boolean In Multiple Numeric Limit Test 3k



    Hi ,

    My VI is giving out3 booleans and 2 numeric values which are needed to be tested. Can we use "multiple numeric limit test" and if so how do we do that?

    Regards

    Prav

    DB:2.45:Testing Boolean In Multiple Numeric Limit Test 3k

    I would use the Boolean to (0,1) function and have all of the results numeric.

  • RELEVANCY SCORE 2.45

    DB:2.45:Accurate Measurements For Print kx



    Using InDesign CS3 Windows XP on a Dell XPS

    I set up all my measurements in inches. Used guides. All my graphics are screen accurate, but when I print everything is off by 1/8" to 1/4". I have looked at all my settings but can't find what the problem might be.

    Thanks,

    Vikki

    DB:2.45:Accurate Measurements For Print kx


    First, make sure you select "centered" for the page positioning and be sure the page size is the same as the label stock.

    Second. Don't presume that the stock is accurately cut and that things are where they should be. Measure where the die cuts are. It may make a difference which end feeds first. You'd be amazed how inconsistent labels can be, especially bargain brand.

    Third. Always design so that the label will still look acceptable if the cutting is off by 1/8", and add a bleed. This will compensate for poor sheet-to-sheet registration on a laser printer, or sloppy positioning at the printer or an inaccurate registration at the post-press if the die cutting is done after. You don't run color to the edge of a page and stop without adding a bleed, and a label is really nothing more than a mini-page. Even the big label companies have tolerance limits that are pretty loose.

    Fourth, if this is going out to print, you probably should be setting it up with the document size the same as the trim size for a single label. It's the printer's job to impose it on the sheet.

  • RELEVANCY SCORE 2.45

    DB:2.45:Showing Summary Count/Avg/Sum In Separate Columns ? z7


    How can I show total summary columns like Sum, Avg, % of Total in Matrix Report of Oracle Report Version R6i in separate columns, while currently all are being displayed one on bottom of each another in same column.

    Best Regards,

    Luqman

    DB:2.45:Showing Summary Count/Avg/Sum In Separate Columns ? z7

    By default the Reports wizard will place each matrix summary under its source column. If more than one summary exists for the same source column then these are placed on separate rows one after the other.
    You can't change the behaviour of the wizard so you need to alter the layout after creating the matrix with the wizard. To change these from rows to columns, go the layout painter and move the fields for the summaries so that they are next to each other. You'll probably need to resize the fields and the frames to do this.

    Try it first with a tabular report since matrix reports can be tricky to re-size. You need to resize the repeating frames that make up the matrix since you can't resize the matrix frame directly.

  • RELEVANCY SCORE 2.44

    DB:2.44:Need A Help In Ui Customization. mc


    We are trying to change the contents of the Summary Page of the Configurator UI (which is displayed when clicking the preview configuration button).
    We need to display the text features value associated with the model in the summary page.
    So i have copied and customized the UI content template page and added the content template to the customized Master template and generated the UI for the model.
    In the summary page content template, i have created a styled text and assosiated the System property - Value from the lov to the styled text.
    the colums are displayed when testing through test model , but it has no column name or values of the text feature in the columns.

    Can some one kindly provide some inputs on how to achieve this, because the dosuments provided by Oracle are insufficient on this regard.

    DB:2.44:Need A Help In Ui Customization. mc

    update we end up implementing a custom jsp page .. modifying the template was not useful... sorry for the delayeeeeeeeed..... update..

  • RELEVANCY SCORE 2.44

    DB:2.44:Display Multiple 3 Digit Alpha Numeric Equipment Codes In One Cell With Corresponding Definition In Another Cell jx


    I have an excel spread sheet generatedfrom another programthat displays driver qualification by a 3 digitalpha numeric code.

    Example, an employee can operate: B2C,BBM,BEG,BEH,BEJ,BXB,FTX,.these values are separated by commas as listed here. These codes are displayed in alphabetic order in cell I2.as many as 50 codes listed in 1 cell.

    I need an easier way to communicate the definition of theses codes.

    Each code has a definition, EX: B2C=TRUCKA, BBM=TRUCKB, BEG=TRUCKC, BEG=TRUCKD, BEJ=TRUCKE, etc.

    How can I display only the definitions ofthe codes that arein cellI2 into the corresponding cell J2?

    Thank you.

    DB:2.44:Display Multiple 3 Digit Alpha Numeric Equipment Codes In One Cell With Corresponding Definition In Another Cell jx

    I was unable to get the last formula to workfor me, however I joined the two columns of equipment codes(for example)with =(F4", "G4) and added all of mycodes and descriptions to the A and B columns from the original VBM, and this has produced the
    desired results for me. I appreciate your assistance.

  • RELEVANCY SCORE 2.44

    DB:2.44:Conditional Format Group By Summary Outline Level z7


    I'm looking to format the colour of my Group By Summary levels based upon what Outline Level they are, and I thought that it would be fairly straight forward.
    But it just isn't working.

    I have 4no Flag fields set-up with the formulae
    Flag1=IIf([Group By Summary] And [Outline Level]=1,True,False)
    Flag2=IIf([Group By Summary] And [Outline Level]=2,True,False)
    Flag3=IIf([Group By Summary] And [Outline Level]=3,True,False)
    Flag4=IIf([Group By Summary] And [Outline Level]=4,True,False)
    which return Yes No in all the right places

    I thought it would then be just a matter of then creating 4no Bar Styles

    Name
    Appearance
    Show For... Tasks
    Row
    From
    To

    *Group By Summary 1
    "Green"
    Group By Summary,Flag1
    1
    Task Start
    Task Finish

    *Group By Summary 2
    "Orange"
    Group By Summary,Flag2
    1
    Task Start
    Task Finish

    *Group By Summary 3
    "Amber"
    Group By Summary,Flag3
    1
    Task Start
    Task Finish

    *Group By Summary 4
    "Blue"
    Group By Summary,Flag4
    1
    Task Start

    Task Finish

    which replaced the normal *Group By Summary
    but all that happens is the Group By Summary bars disappear entirely from the Gantt.
    I think having the Group By Summary as well as the Flag is not necessary, but it makes no difference if I remove it.

    Can anyone tell me what I've done wrong and how to fix it?
    Using MS Project 2013, in case that makes a difference

    Thanks very much

    Kris

    DB:2.44:Conditional Format Group By Summary Outline Level z7


    Hi Kris,

    I had 2010 open and tried your setup and all I can say isI can confirm the problem, also in 2010. I'll inform Microsoft of the bug - no guarantee when it could be solved :-(

  • RELEVANCY SCORE 2.44

    DB:2.44:Only 200 Errors Displayed In Fxcop. How To Display More? 9a


    How to get all the errors displayed on Code Analysis by FxCop? By default only 200 are displayed.

    DB:2.44:Only 200 Errors Displayed In Fxcop. How To Display More? 9a

    See the following blog entry:
    FAQ: How do I increase the number of Code Analysis warnings displayed in the Error List?
    Regards
    David

  • RELEVANCY SCORE 2.44

    DB:2.44:Regarding Alv 98



    hi all,

    In alv i have 8 fields...............first two fields are Customer Grp,And Date And remaining fields are numeric fields...

    i

    at end of customer Grp according to date the total of all numeric fields shoud be displayed(Subtotal) and at last Grand total.......

    How to do that....

    Pls reply...............

    DB:2.44:Regarding Alv 98


    hi,

    ck out these links..

    b How do I add subtotals (I have problem to add them).../b

    http://www.sapfans.com/forums/viewtopic.php?t=20386

    http://www.sapfans.com/forums/viewtopic.php?t=85191

    http://www.sapfans.com/forums/viewtopic.php?t=88401

    http://www.sapfans.com/forums/viewtopic.php?t=17335

    With Rgds,

    S.Barani

  • RELEVANCY SCORE 2.44

    DB:2.44:Numeric Database User Account 1a


    Assalamu Alykum,

    I have Numeric Database user like "3122" , when i use database authentication for the application its give me error , which means that i can't use Numeric user but in my comany all user are numeric , can any buddy tell me how i can authenticate with numeric database user.

    DB:2.44:Numeric Database User Account 1a

    Who are you? The 2.2.1 patch has no bearing on the question posed here. The solution I offered above is the one you should use. The base problem will be fixed in a later release.

    Scott

  • RELEVANCY SCORE 2.44

    DB:2.44:How To Put Repeated Measurements Of Several Groups On The Same Plot? 7s



    I measure the Y value of the three groups.

    The measurements were repeated three times (in different conditions).I want to bring them on ONE plot!

    Using "Fit Y by X" we get three (the number of repeated measurements) columns on the graph, and 5 groups points will be mixed (in each measurement).I would like them (groups) to were located next to each other (using the auto legend to color/mark not enough, because the groups point are mixed and overlapped (in each measurement)).

    This is easily done by OVERLAY PLOT, but there will have to encode 1,2,3, ... 15 on the X-axis in a complate graph (and this sequence can not be edited in performe graph in JMP, unfortunately), but I need 1,2,3,4,5, 1,2,3,4, 5, 1,2,3, 4, 5 on the x-axis.Thank you in advance.

    DB:2.44:How To Put Repeated Measurements Of Several Groups On The Same Plot? 7s


    You can do it with Graph Builder (JMP8 or 9) or Variability Chart. See script example below

    // make sample table
    dt=New Table( "Several groups on same plot",
    Add Rows( 15 ),
    New Column( "Repeat",
    Numeric,
    Nominal,
    Format( "Best", 12 ),
    Set Values( [1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3] )
    ),
    New Column( "Item",
    Numeric,
    Nominal,
    Format( "Best", 12 ),
    Set Values( [1, 2, 3, 4, 5, 1, 2, 3, 4, 5, 1, 2, 3, 4, 5] )
    ),
    New Column( "Data",
    Numeric,
    Continuous,
    Format( "Best", 12 ),
    Set Values( [15, 13, 1, 12, 2, 4, 14, 14, 9, 2, 4, 1, 7, 2, 14] )
    )
    );

    // Graph builder
    dtGraph Builder(
    Variables( X( :Item ), Y( :Data ), Group X( :Repeat ) ),
    Elements( Points( X, Y, Legend( 1 ) ) )
    );

    //Variability chart
    Variability Chart(
    Y( :Data ),
    X( :Repeat, :Item ),
    Std Dev Chart( 0 )
    );

  • RELEVANCY SCORE 2.44

    DB:2.44:Workflow Reporting Details Summary kf


    Hi all,Does anyone know the query used by Documentum to get the information displayed when you go to the details summary page of workflow reporting in Webtop? I'm mainly concerned about how it retrieves the Task Name, Status, Performers, Receive Date, and Complete Date, thanks in advance.

    DB:2.44:Workflow Reporting Details Summary kf

    nevermind, read through the object_reference guide and figured out the tables, thanks anyway!

  • RELEVANCY SCORE 2.44

    DB:2.44:How To Suppress Decimal Part For Numeric Fields Dynamically p9



    Hi ,

    We are using Crystal Desinger of version 11.5.0.313.

    We have numeric fields whose format is picked up fromt he systems regional and language options settings. This approachis working for numeric fields with decimal values. But it is failing in the case of numeric fields which should not diplsya decimal part.

    The system numeric format is set as below :

    Decimla Seperator : "#"

    Thousand Seperator :"!"

    eg if the value of the field is "12345", becasue of the system format the value is displayed as "12!345#00" But we are expecting "12!345"

    The moment we try to customize by saying the decimal as "1" the fields is not picking the thousand seperator from the regional settings at runtime.

    Can you please help us how we cans uppress decimal places at runtime ?

    Thanks in advance.

    Thanks and Regards,

    Shireen.

    DB:2.44:How To Suppress Decimal Part For Numeric Fields Dynamically p9


    Seem issue so same solution

    Try this and see if it works for you.

    ToText({database field},0,'!','');

    // 0 = No Decimals

    // ! = the thousands separator

    // '' (two single quotes with no spaces) = no decimal separator

    Edited by: Sanjay Kodidine on Feb 12, 2009 5:27 PM

  • RELEVANCY SCORE 2.44

    DB:2.44:How To Display Euro Sign On A Xhtml Page pd



    Hi, I am trying to display only the euro sign into a xhtml page, it is really a trouble for me because until now i display it using a numeric converter but now only the euro sign is needed something like " prices are displayed in E" where E is the euro sign, no numeric values are required. Please if you have an idea give me a hand. Regards, Radu

    DB:2.44:How To Display Euro Sign On A Xhtml Page pd


    Hi ! Thanks for posting. Ok, i will seek that post.Regards, Radu

  • RELEVANCY SCORE 2.44

    DB:2.44:Measurements In Vanishing Point Tool ? 19



    What are the measurements used in the Vanishing point tool, Centimeters, the same measurements that are used within photoshop ?

    DB:2.44:Measurements In Vanishing Point Tool ? 19


    The measurements don't have any system there just numbers for whatever. Seems odd Adobe wouldn't have made a measurement system, oh well.