• RELEVANCY SCORE 4.53

    DB:4.53:Wifi Accesspoint On The Dmz mm





    Hi, We have an RV042 router. And we have 2 Wifi routers (acting as Access points).

    I'm looking for a solution where my drop-in clients would have their own WIFI key to access Internet, with no access to our LAN.

    -Can I place a Wifi AccessPoint on the DMZ so my drop-in clients use it to connect to the WEB.

    -While putting another Wifi AccessPoint on a regular LAN port for Employees to use and stay within the LAN?

    Any problem?

    thanks!

    DB:4.53:Wifi Accesspoint On The Dmz mm


    Hi Thierry

     

    Did you ever figure out how to do this. If so can you post what you figured out.

     

    Thanks,

    Pierre

  • RELEVANCY SCORE 3.69

    DB:3.69:1200 Accesspoint Support On Wlc 39





    Hi Guys,

    I wanted to know if the 1200 series access point are supported on what wlc software versions - latest.

    Thanks in advance.

    DB:3.69:1200 Accesspoint Support On Wlc 39


    Hi Suhas,

    here is the link which let us know the release notes and gives us the info on what all APs are supported in wat versions..

    http://www.cisco.com/en/US/partner/products/ps6366/prod_release_notes_list.html

    lemme know if this answered your question..

    RegardsSurendra====Please dont forget to rate the posts which answered your question and mark it as answered or was helpfull

  • RELEVANCY SCORE 3.18

    DB:3.18:Accesspoint Customisation dk



    hi all,

    can anyone tell me if its possible to move the position of the login box and main logo on the accesspoint login screen?

    Thanks

    DB:3.18:Accesspoint Customisation dk


    No problem. It is possible. It would be easier if you don't have html knowledge to download a web editor.

    JV

  • RELEVANCY SCORE 3.11

    DB:3.11:How To Install And Use Accesspoint ja



    How do you install AccessPoint?

    How do you use AccessPoint to access a document on a QV server through a web browser?

    DB:3.11:How To Install And Use Accesspoint ja


    An AccessPoint is a web site that lists QVW documents made available by the QlikView services. An AccessPoint is made available as part of the basic QlikView Server installation:

    Install QlikView Server Package on the host machine. It will include either QVWS (QlikView's own web server) or IIS support. The Publisher is not a requirement to get an AccessPoint up and running.License the QVS Service by opening the Management console (http ://servername:4780/qmc/default.htm), selecting System-Licenses-QlikView Server-QlikView Server License and entering Serial number and control. Then press Apply License at the bottom right. Serial number and control will be sent to you by your QlikView partner when you buy a QVS license. This includes a number of user licenses.Assign licenses to all users that should be able to visit the AccessPoint. This is done in the QMC at System-Licenses-QlikView Server-Client Access Licenses-Assigned CALs.Put your documents in the Root Folder. The default directory is C:\ProgramData\QlikTech\Documents. They will be published straight away in you new AccessPoint.

    If all QlikView services are up-and-running, tell your users to open a browser and navigate to http ://servername/qlikview.

    Of course there are lots of other details that might require you attention. But these are the basic steps to launch a QlikView AccessPoint. YMMV.

    Peter

  • RELEVANCY SCORE 3.10

    DB:3.10:Reloading Qv On The Accesspoint zx



    HI,

    can we Reload Qv documents while viewing them on the accesspoint, making some changes and yet triggering reload to see the changes in the same session ?

    Thanks in Advance

    Regards

    Swapneel

    DB:3.10:Reloading Qv On The Accesspoint zx


    Hi,

    if it answer your concern, then please close the thread by selecting appropriate answers.

    Regards

    ASHFAQ

  • RELEVANCY SCORE 3.05

    DB:3.05:Rv016 Dmz Issue k8


    I am having problems getting my DMZ to work on this router. I have set up the IP's for the DMZ, and the LAN can see the DMZ, but not the WAN. Help!
    I need to set up multiple servers behind the DMZ.

    DB:3.05:Rv016 Dmz Issue k8

    Awesome, my RV016 has one to one capabilities. I will read up on this feature. Thank you so much for your advice!

  • RELEVANCY SCORE 3.04

    DB:3.04:Ps2 - Dmz (Motorola Sbg1000 9m


    How do I configure/create a DMZ on my modem? I'm a neophyte at this so I would appreciate step-by step instructions. I want to use the built-in firewall and set up a DMS for the PS2. But the PS2 seems to work only if the firewall is disabled.

    Thanks for the help!

    Dave Lamar

    DB:3.04:Ps2 - Dmz (Motorola Sbg1000 9m

    Finally got it to work. I visited the PS2 website and their forums have a FAQ for how to find out the PS2 MAC address...have to go throught the ISP set-up without the cable conneted then hit "select" at the failure notice. Then I configured the DMZ per instructions e-mailed from Motorola. Things are working fine!

    Thanks to all for the help!

  • RELEVANCY SCORE 3.02

    DB:3.02:Dmz Dhcp Release da



    Hi, I am running customer wifi on optional port, dmz.  We have been having problems with people not being able to connect to the wireless.  When I check the DMZ DHCP clients list it is showing about 120 people connected.  I don't think that it is releasing ip addresses.  I have the lease time set to 1 hour.  I have tried rebooting the firewall, however when I go right back to dhcp list they are all still there. There is no option to release any ip addresses.  I try to change the release time and apply, but this does nothing. 

    The business is set up on the lan. the customer wifi is set up on optional port dmz. 

     

    Any ideas? Thanks

    I have this SA540 Security Appliance, and the firmware is up to date. 

    DB:3.02:Dmz Dhcp Release da


    I figured out that I can get the DHCP client list to refresh by going to DMZ config, then changing the ending ip adress down by one, from 10.1.20.200 to 10.1.20.199, then clicking apply. I then go back to DMZ DHCP clients and now the list is down from 120 ips to only a couple ip addresses.  Once this is fixed the wifi starts to work and people are able to connect without any problems.  I would like to know if there is a way to keep this from happening, or what is causing this. 

  • RELEVANCY SCORE 3.01

    DB:3.01:Remotevpn Initiated From Dmz 3p



    Hey,

    I have following setup:

    LAN -- ASA 5510 -- INTERNET

                       |

                     DMZ

    We have the remote ipsec VPN configured to terminate on external interface of the ASA for mobile staffs or staff working from home. I also configured Guest WIFI in our DMZ. Now I would like to have user connected to Guest WIFI and then build remote VPN with existing vpn profile to access internal resouce.

    Initially I thought this can not be done. But I keep getting the voice in my mind that it is doable. So decide to ask here.

    Thanks,

    /S                     

  • RELEVANCY SCORE 2.95

    DB:2.95:Does The Sagem Router Segregate Wifi Devices From Wired Devices. mm



    I have discovered an interesting networking foilble on my Sky Sagem Router that did not occur with the netgear router. All devices which connected to the SkyRouter via Wifi cannot see any devices that are connected on the WiredSide of the router. However devices connecting to a second wifi accesspoint which is connected to that wired side of the router can see wifi devices on that accesspoint and other wired devices. Now to take it a stage futher if I try to connect via putty to my internal server I cant use an internal IP address but I can use the routers external ip address to route back in over the network if I am connected to the Sky Routers wifi.

    The network feels a little like this

    [wifi devices ] [wifidevices]

    [router wifi [1] ] [additional basestation [2] ]

    [router ]---------------+---------------|

    [2]

    +---------------+-------------+

    [ xbox 360 ] [ windows pc / virtual server ]

    Everything in [1] can see anything in [1] but not [2]

    Everything in [2] can see all wifi and wired devices in [2]

    Which suggests the Router is placing all wifi devices on its wifi device into a Blue Zone which would create headache for non geeky people. My next answer is to put another wifi ap on [2] and use that instead of the routers Wifi Ap.

    DB:2.95:Does The Sagem Router Segregate Wifi Devices From Wired Devices. mm


    Don't make me laugh Gregor. It's constantly 'it's being looked into and we will have an answer soon yet nothing ever happens.

    They even tell us 'We will get back to you tomorrow' and guess what no-one ever does. As this thread shows this issue has been present for atleast 3 months. It should never take any company that long to fix something that prevents the CORE FEATURE of a router from working, its not like its some advanced feature that only the most techy people use, its something that impacts anyone who uses a mixed Wired/Wireless network (which to some degree is most users)

  • RELEVANCY SCORE 2.94

    DB:2.94:Asa/Fwsm: Static(Dmz,Dmz) cd



    Hi ,

    Is the following a workable config on FWSM or on ASA?

    static (DMZ,DMZ) 10.10.10.111 192.168.26.111 netmask 255.255.255.255

    Thank you

    Sri

    DB:2.94:Asa/Fwsm: Static(Dmz,Dmz) cd


    But per my testing, it works in both directions. Both sides can initiate the traffic since you are using static NAT.

    Beside what I mentioned in the last post, you need make sure you have route added in your ASA correctly.

    For example, you need add a route on ASA to route traffic destinate to 192.168.26.111 to  10.10.10.111.

    You might need to add "permit ip host 10.10.10.111 host 172.24.24.111" on the ACL applied to dmz interface as well.

  • RELEVANCY SCORE 2.91

    DB:2.91:Ie Plugin fa



    Our users use the IE Plugin to access QlikView documents. When they click on a document in to AccessPoint, that document opens. What I want to know is "Can they click on a button in that document to open another document that is in the IE Plugin AccessPoint without having to go back to the AccessPoint?"

    Thanks,Stephen

    DB:2.91:Ie Plugin fa


    Hi SJCharles.

    You can add a button to the .qvw and set an action to open the document.

    You can go to the button properties - Actions Tab - Add Action - Type is External - Open QlikView Document.

    Then, you can add the document when you go back to actions windows.

    Hope this helps,

    Erich

  • RELEVANCY SCORE 2.91

    DB:2.91:Wifi Signal Detection ax


    Hi
    Can anyone tell me how to use the AccessPoint,AccessPointCollection and adapter to develop a wifi signal detection.
     

    DB:2.91:Wifi Signal Detection ax

    there are so many things inside,which 1 should i download.
    is it inside got show how to code, or just show the properties

  • RELEVANCY SCORE 2.91

    DB:2.91:Direct Access To Accesspoint j3



    Hi All,

    I have Access Point on a Windows Server, I want the user to be able to get direct web access to AccessPoint without having to use RDP to the windows server

    What do I need to do to sort this?

    Regards

    Alan

    DB:2.91:Direct Access To Accesspoint j3


    Thanks Again Peter

    I should be able to get this sorted shortly

    Regards

    Alan

  • RELEVANCY SCORE 2.91

    DB:2.91:Wifi Issues On The S500 dc


    The S500 will only connect with very few accesspoints. Even when it connects with an accesspoint the wifi indicator often turns gray and no data transfer is possible eventhough it is connected. Sometimes it helps to reboot the phone but not always. Acer wants me to send it in for repair but I've already got a new phone from my supplier with the same issues. The problems therefor seem to be not a broken device... Are there more users with these issues?

    DB:2.91:Wifi Issues On The S500 dc


    Ifour phones are branded from a specific telecom carrier - we will not receive any update from Acer, only from the telecom operator. This was the response from Acer in other related topic.

    Sorry guys..

  • RELEVANCY SCORE 2.90

    DB:2.90:Wifi And Lan Simultaneously mz


    Hi,

    I have a third party USB WiFi adapter, connected to a public(but paid) WiFi accesspoint here in the street. Works perfect.
    Secondly, I have 2 printers (in another room)attached to a network in my house (LAN only). The G5 is also connected to that LAN. There is no internet connection available on the LAN, that's why I have the WiFi adapter.
    Currently, when I need to print, I have to disable the WiFi ethernet adapter, enable the LAN ethernet adapter, print out my stuff, disable the LAN ethernet adapter and enable the WiFi ethernet adapter again.......
    So, in other words, when the WiFi ethernet adapter is turned on, I cannot print.
    Probably, when I print the G5 is looking for the printers on the WiFi accesspoint and not on the "local" LAN. That seems to be the issue.

    How can I setup some routing mechanism or rules, so that I can have both ethernet adapters turned on and the print jobs finding the right (local) router?

    DB:2.90:Wifi And Lan Simultaneously mz

    'Set Service Order', worked like a charm. I knew it wasn't something difficult

  • RELEVANCY SCORE 2.90

    DB:2.90:Qv Accesspiont - Objects Are Gray..? 7f



    Hello forum ..

    I'm facing a problem with AccessPoint View.

    I'm showing the models Through AccessPoint and the Objects(charts) on the Page of the model are in Gray Squares - and not showing the Values images.. Always happens after Betch loading.

    If i'm open a model and save it and than going to AccessPoint - the problem is gone

    Is there a solution to this matter ?

    DB:2.90:Qv Accesspiont - Objects Are Gray..? 7f


    Hello forum ..

    I'm facing a problem with AccessPoint View.

    I'm showing the models Through AccessPoint and the Objects(charts) on the Page of the model are in Gray Squares - and not showing the Values images.. Always happens after Betch loading.

    If i'm open a model and save it and than going to AccessPoint - the problem is gone

    Is there a solution to this matter ?

  • RELEVANCY SCORE 2.90

    DB:2.90:Vpn Concentrator 3015 Dmz 7x



    What is the purpose of the additional ethernet inerfaces (in addition to inside,outside) on the 3015 and higher conecentrators. On the VPN 3015 i've seen it referred to as a DMZ port. But most scenarios i have seen have the VPN itself located in the DMZ of a firewall. So Does the DMZ port of the VPN device connect to the firewall DMZ, or to a special vpn dmz ?

    MA

    DB:2.90:Vpn Concentrator 3015 Dmz 7x


    Hi,

    Just if you have additional LAN.

  • RELEVANCY SCORE 2.90

    DB:2.90:Is It Possible To Remove Ajax As An Option From Accesspoint Dropdown? kp



    We have qvw files on an AccessPoint that require the IEPlugin. We would like to remove AJAX as an option on the dropdown rather than having to uncheck the AJAX property for each file via the QVEMC.

    DB:2.90:Is It Possible To Remove Ajax As An Option From Accesspoint Dropdown? kp


    We have qvw files on an AccessPoint that require the IEPlugin. We would like to remove AJAX as an option on the dropdown rather than having to uncheck the AJAX property for each file via the QVEMC.

  • RELEVANCY SCORE 2.90

    DB:2.90:Pix 515e Dmz Single Server zx



    i have single server on the dmz can i connect it directly to the dmz ethernet port on the pix using a cross cable

    DB:2.90:Pix 515e Dmz Single Server zx


    If you want the webserver to be able to talk to the mail server, you have to configure an access list (or old style "conduit permit") permiting traffic from the IP of the webserver to the IP address in which you translated the internal address of the mail server.

    Cheers

  • RELEVANCY SCORE 2.90

    DB:2.90:Accesspoint Crashes Ie xf



    We have a user who is using IE6 and QV9.

    Sometimes when she logs on to Accesspoint she gets the following errors:
    Error message:

  • RELEVANCY SCORE 2.89

    DB:2.89:User Account Prompting When Accessing The Accesspoint 3d



    When he is logging in to QV Access Point it requires username and password. How to disable this prompt option from occuring when accessing the accesspoint . Any suggestions on this

    DB:2.89:User Account Prompting When Accessing The Accesspoint 3d


    This will do the job for you...

    Internet Explorer -- Tools -- Internet Options -- Security -- Local intranet -- Custom level -- User Authentication(logon) -- Select "Automatic logon with current user name and password" -- ok -- ok

  • RELEVANCY SCORE 2.89

    DB:2.89:Vlan On Accesspoint dk



    Hi

    I have L3 switch in wich all the vlan are created .To L3 accesspoint is connected and vlan for accesspoint is

    created .

    Now the requirement is I need to create Vlan on accesspoint so that some imp users shouls be able to acess internet as

    well as all the vlan.

    some users should acess only internet

    I have cisco aironet accesspoint.

    DB:2.89:Vlan On Accesspoint dk


    that is easy enough to do.

    when you create your ssid call the VLAN in the config:

    dot11 ssid Test

    vlan 10

    authentication open

    authentication wpa version 2

    wpa-psk ascii 0 12345678

    then on the radio:

    interface dot11radio0.10

    encapsulation dot1q 10

    bridge-group 10

    interface G0.10

    encapsulation dot1q 10

    bridge-group 10

    Interface dot11radio0

    encapsulation vlan 10 mode ciphers aes-ccm

    ssid Test

    From there rinse/repeat for each SSID and VLAN that you need to get working.

    Steve

  • RELEVANCY SCORE 2.89

    DB:2.89:Wlan Dmz On Cisco 877 93



    Hello,

    I have a pretty basic setup with an cisco 877 for routing our lan over adsl. Now we want to have an public wlan available in our shop. I think I need to set-up an 2nd vlan, and use that with Eth3 to hook up the accesspoint. Can anyone explain me the steps to create an dmz set-up on the 877 for this? I'm only beginner in cisco configs.

    DB:2.89:Wlan Dmz On Cisco 877 93


    The connection to the Internet is over a serial line. Ethernet 0 is connected to the internal network (a single LAN). Ethernet 1 is connected to a DMZ network, which has a single node used to provide services to the outside world. The ISP has assigned the company the netblock 192.168.27.0/24. This is equally split between the DMZ and the internal LAN with subnet mask 255.255.255.128.

    For further information about configure DMZ interface click this link.

    http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_configuration_example09186a0080094111.shtml

  • RELEVANCY SCORE 2.88

    DB:2.88:Wifi Connection On Windows Mobile s8


    Hello all,I would like to create an application on windows mobile 6.0.The app is connecting to the given AccessPoint but in 5-10 second it disconnects and I don't know why.The program is using OID_802_11_INFRASTRUCTURE_MODEOID_802_11_AUTHENTICATION_MODEOID_802_11_ENCRYPTION_STATUSandOID_802_11_SSID - after this command the connection is established for 5-10 seconds.Can someone help to me or has anyone any C++ sample code for the Wifi connection building?Thanks,Buxi 

    DB:2.88:Wifi Connection On Windows Mobile s8

    OK sorry for my ignorance but I'm new on this forum and I found Wifi problems in this forum.Regards,Buxi

  • RELEVANCY SCORE 2.87

    DB:2.87:Webview x8



    I use AccessPoint in IE and QlikView in 'conventional' view.

    Another user uses AccessPoint in IE and sees the 'webview'.

    I am not clear why there is a difference. My difficulty is that I have a button which runs a macro - this works fine on my PC but not on the other.

    Suggestions are welcome as always.

    Thanks

    Richard

    DB:2.87:Webview x8


    Macro would not run in ajax ie. "webview" but runnable in Qv Plugin. You could use IE Plugin to run the macro.

  • RELEVANCY SCORE 2.86

    DB:2.86:New Axim 3i Can't Find Wifi Connection!!! c7



    Hi there...

    I recently received my new dell axim 3i with wireless modul.

    I have an accesspoint (router with wifi) at home. All my other wifi-components (notebook, etc.) works fine... only my dell axim 3i doesn't find any connection. I downloaded the new rom update... doesn't work either. After 5 hard-resets, 15 coffees and 5h surfing in various forums on the net, i'm totally lost and frustrated..... can anybody help me please?!

    Thx.

    your frustrated dell customer

    DB:2.86:New Axim 3i Can't Find Wifi Connection!!! c7

    Ahh, one thing I forgot to mention. Try enabling SSID broadcasting on your router. That may be why you aren't seeing your network.

  • RELEVANCY SCORE 2.86

    DB:2.86:Clicked On Forget To My Wifi Access Point! 3m



    I accidentally clicked on forget to my wifi accesspoint

    now how to restore it

    i scanned for wifi points many times but not anle to find my wifi in it!!!

    DB:2.86:Clicked On Forget To My Wifi Access Point! 3m


    no problem,

    settings - wireless networks - wifi settings - Add Wi-Fi network (enter it manually)

  • RELEVANCY SCORE 2.86

    DB:2.86:Unable To Access Accesspoint After Installing Qv8.5 m9



    Hi fellow experts!

    My qlikview AP URL automatically redirects me to a login page:

    Namely: http://qlikviewXX/accesspoint/default.aspx redirects me to http://qlikviewXX/accesspoint/login.aspx

    However I am not able to provide any user/pw combination that allows me to pass to the AP Page that shows me the QV Applications.

    Using QV 8.5 on Serevr2008 R2.

    So, what am I missing here? Any ideas?

    DB:2.86:Unable To Access Accesspoint After Installing Qv8.5 m9


    Error: Internet Explorer cannot display the webpage !

    This URL does not seem to exist. #

    It is not reachable on the "Live" system either.What is this supposed to do?

    Are you aware that we are still on QV 8.5? Probably this URL is a post 8.5 service?!

  • RELEVANCY SCORE 2.85

    DB:2.85:E72 Messaging 89



    I would like to set the Accesspoint for an IMAP account in E72 messaging to "standard" as I could in the previous client in my N79. It seems that in the E72 only "always ask" or a specified accesspoint are available options.

    This makes it impossible to use WiFi access at home or in the office and a mobile provider when on the road.

    DB:2.85:E72 Messaging 89


    I would like to set the Accesspoint for an IMAP account in E72 messaging to "standard" as I could in the previous client in my N79. It seems that in the E72 only "always ask" or a specified accesspoint are available options.

    This makes it impossible to use WiFi access at home or in the office and a mobile provider when on the road.

  • RELEVANCY SCORE 2.85

    DB:2.85:Cisco Aironet 1310 Accesspoint Bridge Mode Wifi Issue Iphone Ios7 88



    Hi..

    I have a wireless network of 4 access point cisco 1310 bridge mode...

    Recently some users update there ipad/iphone to IOS7...

    When i try to connect to the wifi - when i select the wifi network it's saying "UNABLE TO JOIN THE NETWORK WIRELSESS NAME" even it's not asking for the password,

    The new ios 7 is not supporting the current configuration...

    Please advise me for the related configuration.

    looking forward to your earliest response.

    DB:2.85:Cisco Aironet 1310 Accesspoint Bridge Mode Wifi Issue Iphone Ios7 88


    Hi..

    I have a wireless network of 4 access point cisco 1310 bridge mode...

    Recently some users update there ipad/iphone to IOS7...

    When i try to connect to the wifi - when i select the wifi network it's saying "UNABLE TO JOIN THE NETWORK WIRELSESS NAME" even it's not asking for the password,

    The new ios 7 is not supporting the current configuration...

    Please advise me for the related configuration.

    looking forward to your earliest response.

  • RELEVANCY SCORE 2.84

    DB:2.84:Qlikview Accesspoint zc



    Hi,

    I installed QlikView 11 and configured the AccessPoint using IIS. But there are no documents listed in the accesspoint. I checked the permission on the folder and the Qlikview documents. If anyone has encountered this issue, let me know what needs to be done to resolve.

    Thanks,

    Raj.

    DB:2.84:Qlikview Accesspoint zc


    Hi,

    I installed QlikView 11 and configured the AccessPoint using IIS. But there are no documents listed in the accesspoint. I checked the permission on the folder and the Qlikview documents. If anyone has encountered this issue, let me know what needs to be done to resolve.

    Thanks,

    Raj.

  • RELEVANCY SCORE 2.82

    DB:2.82:Clear Option On Accesspoint d8



    I am not able to clear my selections on AccessPoint but on Desktop Client it works. Field is not locked down and no triggers are set. I am baffled. Has anyone experienced this? No settings are blocking the users from clearing any selections yet they are not able to.

    DB:2.82:Clear Option On Accesspoint d8


    Oops, dident even try that, thanks Rob.

  • RELEVANCY SCORE 2.82

    DB:2.82:Wifi Roaming Problem zk



    Is there someone who found a solution to this issue:

    When there are many AccessPoint and the iPad must do Roaming the iPad change of AccessPoint only when it lose the one where it was connected instead of changed to a better AccessPoint who have stronger signal before that it lose connection ?

    DB:2.82:Wifi Roaming Problem zk


    This is a big issue for me. I had to resort to getting a mobile wifi box for Go to connect when traveling or using an iPhone to share the 4G conneciton over Wifi.

    Even though the Wifi box stays connected with Go it changes it's connection. This is usually a good buffer but if the Wifi box looses connecttion for too long or takes time switching Go will close the connection. Actually being mobile with Go is an issu and do not know of a good way to fix this.

    A common case for me would be users on a train trying to get some work done with Go while moving.

  • RELEVANCY SCORE 2.80

    DB:2.80:Understanding Deployment Of Qlikview Server And Publishing On Accesspoint 1c



    Hey,

    Can anyone help me understanding the deployment of qlikview server and how documents are published on accesspoint ??

    Thanks.

    DB:2.80:Understanding Deployment Of Qlikview Server And Publishing On Accesspoint 1c


    once u installed the server,

    u have to map your qlikview applications folder with server.

    following are the steps(from server)

    1.System tab

    2. Select ur server

    3.Folder tab

    4. there is plus icon on right top -click on that

    5.select folder icon

    6.u will get pop-up window

    7.select ur qlikview applcaitons folder

    8. save

    9.go to documents--all ur applications are here

  • RELEVANCY SCORE 2.79

    DB:2.79:Sorting On Accesspoint k1



    Hi Experts,

    Can someone please explain how can the end user perform sorting on the dashboards columns on the QlikView Accesspoint.

    I appreciate if any can provide the steps to do so.

    Thanks in advance.

    Regards,

    Shyam.

    DB:2.79:Sorting On Accesspoint k1


    Hi Shyam,

    If you mean sorting straight tables - it can be done by double-clicking on a column header. Interactive sort must be allowed in the table properties for this to work.

    Regards,

    Michael

  • RELEVANCY SCORE 2.79

    DB:2.79:Wifi Not Working In Ipad 2 md


    Hello there Apple community, i would like to ask about one major problem. my wifi is not working at all. it doesnt receive any of signal, it doesn't recognize any of the signal. This is happen after i upgrade into IOS 6.0. Previously (IOS 5) the signal quality is really poor, only 1 or 2 bar on nearest AccessPoint. Can anyone help me with this? because it is quite expensive to change whole wireless component in IPAD. i think around $250. This is killing me since i always connected to wifi to do my work. Thank you very much

    DB:2.79:Wifi Not Working In Ipad 2 md

    Hello there Apple community, i would like to ask about one major problem. my wifi is not working at all. it doesnt receive any of signal, it doesn't recognize any of the signal. This is happen after i upgrade into IOS 6.0. Previously (IOS 5) the signal quality is really poor, only 1 or 2 bar on nearest AccessPoint. Can anyone help me with this? because it is quite expensive to change whole wireless component in IPAD. i think around $250. This is killing me since i always connected to wifi to do my work. Thank you very much

  • RELEVANCY SCORE 2.78

    DB:2.78:Iphone Wifi Certificate Eap-Tls Based mf


    hi everyone, I'm trying to setup a secure wifi accesspoint. The cisco AP (with Cisco ACS) works with certificates generated by the organisations certificate authority (MS 2008R2). Everything works fine on our (MS) laptops (connecting to accesspoint, selecting authentication certificate and retrieve IP)On the iPhone (IOs6) however, i see the network, i connect to it, select EAP-TLS then my user certificate (imported using e-mail message) and provide the username in domain\user format. Then i get the trust certificate from the accesspoint, i click accept....I see on the DHCP server that the iPhone receives an IP address, but the iPhone itself stays "thinking" about the connection and finally drops it again. The logs in the cisco AP do not show any failed authentication attempts..hints are more than welcome Roelf

    DB:2.78:Iphone Wifi Certificate Eap-Tls Based mf

    hi everyone, I'm trying to setup a secure wifi accesspoint. The cisco AP (with Cisco ACS) works with certificates generated by the organisations certificate authority (MS 2008R2). Everything works fine on our (MS) laptops (connecting to accesspoint, selecting authentication certificate and retrieve IP)On the iPhone (IOs6) however, i see the network, i connect to it, select EAP-TLS then my user certificate (imported using e-mail message) and provide the username in domain\user format. Then i get the trust certificate from the accesspoint, i click accept....I see on the DHCP server that the iPhone receives an IP address, but the iPhone itself stays "thinking" about the connection and finally drops it again. The logs in the cisco AP do not show any failed authentication attempts..hints are more than welcome Roelf

  • RELEVANCY SCORE 2.78

    DB:2.78:Change Order Of 'Favourites' Category On Accesspoint Category Drop-Down List mk



    Hi Guys,

    Is it possible to change the order of favourites in the category list on the AccessPoint?

    You can see in the example below, it interrupts the normal user-defined categories based on an alphabetical order.

  • RELEVANCY SCORE 2.78

    DB:2.78:Inside Network Access Dmz Host f1



    Hi;

    I Have a ASA 5510 on my network, which 3 networks (inside, outside, dmz).

    When a dmz host access a inside Host, works ok, but when a inside host try access the dmz host, the following message is displayed on LOG:

    Deny TCP (no connection) from hid-dmz/25 to hid-iwss/44674 flags SYN ACK on interface dmz

    The static nat:

    static (dmz,inside) 172.16.1.0 172.16.1.0 netmask 255.255.255.0

    static (inside,dmz) 10.40.4.0 10.40.4.0 netmask 255.255.255.0

    where:

    172.16.1.0/24: DMZ Network

    10.40.4.0/24: Inside Network

  • RELEVANCY SCORE 2.78

    DB:2.78:Closing An Current Application Using Button Click In Accesspoint fp



    Hi,

    I want to close the currently using application on a button click in the accesspoint.

    Please help me out in this issue.

    Thanks in Advance

    Dhoulath

  • RELEVANCY SCORE 2.77

    DB:2.77:Wrvs4400n No Route To Host Wifi To Wifi jk



    Hi,

    I can't connect wifi-clinet to wifi-client on my DMZ. It works cable to wifi and wifi to cable. When I try to connect I get no route to host on the devices. Any ideas?

    /Patrik

    DB:2.77:Wrvs4400n No Route To Host Wifi To Wifi jk

    I heard that Netgear has a feature called wireless client separation, does the WRVS4400N have a simular feature?

  • RELEVANCY SCORE 2.77

    DB:2.77:Accesspoint Slow To Load p3



    Can someone please provide some guidance on speeding up QlikView AccessPoint? Lately, my AccessPoint loads slower than before. I am using 11.2 SR6 with Chrome. There is a longer delay in loading my apps. I have played around with deleting some of the files in the Documents folder and this has some impact...am I missing something else?

    Thanks.

    DB:2.77:Accesspoint Slow To Load p3


    Well, the AccessPoint does a couple things when you first open it: (1) tries to find out who you are (authentication), and (2) populates a list of documents that you have access to (authorization). Or, rather, QlikView server performs point #2, but the QVWS/IIS needs to communicate with the QVS to display the list to you, the user.

    The volume of QVWs goes to point #2, as does the relative location of the applications, and of the servers. Meaning, if your QVWs are hosted on network storage (NAS1) and your QVS is on one server (Server1) and your QVWS is on another server (Server2), those are all nodes that must be navigated by the network before your AP will display the list of application to you. Make sure that the network speed between all components is good.

    Point #1 has to do with the directory against which you are authenticating, and the QlikView Service responsible for it (the Directory Service Connector, or DSC). It is always a best practice to keep the DSC on all machines that need. For example, if you have a Publisher box and a Web Server box, make sure that each one has a local DSC, and that you're not trying to use the DSC from one machine across the network (doing so adds unnecessary overhead). In addition, The DSC needs to be able to communicate with your directory (Active Directory, for example) to authenticate the username. Check with your network admins to make sure the ports between the web server box and the Domain Controller are opened properly. I've personally seen AccessPoints take over a minute to load because of this issue.

    Hope this helps.

    Vlad

  • RELEVANCY SCORE 2.77

    DB:2.77:Page Blank On Accesspoint On Blackberry, Help Please!!!!! 7c



    Hi,

    I try to access to an application by Accesspoint on Blackberry. But I have a blank page (file joined).

    I use DMS authentification and I set the "https:" to "http" in the config file.

    Can anyone help me?

    DB:2.77:Page Blank On Accesspoint On Blackberry, Help Please!!!!! 7c


    Hi,

    I try to access to an application by Accesspoint on Blackberry. But I have a blank page (file joined).

    I use DMS authentification and I set the "https:" to "http" in the config file.

    Can anyone help me?

  • RELEVANCY SCORE 2.77

    DB:2.77:Management Vlan 99



    Hello Experts,

    normaly the Management VLAN of a Accesspoint is on the BVI1 Interface of a Accesspoint - Right?

    Is it possible to put the Management into another VLAN than VLAN1?

    How can i configure that?

    DB:2.77:Management Vlan 99


    Hi,

    VLAN1 and BVI1 are different topics! The Management VLAN is always the "native" VLAN. So you can assign the VLAN xy to be the native VLAN and the Interface BVI1 is assigned to VLAN xy. Be aware of the native VLAN! It's submitted untagged.

    !

    interface BVI1

    ip address 10.10.10.10 255.255.255.0

    !

    interface FastEthernet0.xy

    description WLAN Management

    encapsulation dot1Q xy native

    !

    The native VLAN is even a issue for DHCP. The builtin DHCP server only serves DHCP broadcasts within the native VLAN.

    Kind regards

    Peter

  • RELEVANCY SCORE 2.77

    DB:2.77:Servername In Url fs



    I have a scenario where we needed to move our server to the DMZ.

    When on of my users clicks on a qv document, qv opens it up with a URL that looks like

    internal server name/accesspoint/Default.aspx

    Since we are in the DMZ an external end user cannot view the document.

    Is there a setting I could change to have the document fire up with

    external DNS name/accesspoint/Default.aspx

    We are currently on 8.5

    DB:2.77:Servername In Url fs


    I tried that but the document URL boxes are greyed out for me.

    The following worked for me

    I went to

    \Documents and Settings\All Users\Application Data\QlikTech\Publisher\AccesspointService\Settings.xml

    I changed the LinkMachineName="internalservername" to LinkMachineName="url.com".

    It worked like a charm

  • RELEVANCY SCORE 2.77

    DB:2.77:Thumbnail Images Disappearing On Accesspoint ac



    Hi,I refreshed all of our dashboards this morning in my QlikView software and transferred the files to the server.

    Immediately I could see the thumbnail images of them in AccessPoint.Now I view AccessPoint and some of them say 'Missing Image'.Has anyone else experienced this?Regards,Matt

    DB:2.77:Thumbnail Images Disappearing On Accesspoint ac


    Hi,

    You may have a proxy server that is blocking the images. I have also seen this when customer is using SiteMinder.

    Bill

  • RELEVANCY SCORE 2.76

    DB:2.76:Can't Connect To Accesspoint 7m



    I know this topic has been addressed already. I am running Qlikview Enterprise Server on a Windows 7, and I am unable to connect to AccessPoint outside of the server. I am able to connect to AccessPoint when I use Remote Desktop Connection, and log into the server.

    I have checked all of our inbound/outbound rules, and the ports that should be opened have been. Ports 4747, 4749, and 80 all allow inbound/outbound connections.

    Are there other settings in the QMC or AccessPoint that I may have overlooked?

    Thanks,

    DB:2.76:Can't Connect To Accesspoint 7m


    Hi Kristan,

    Yes i am using QMC, If you want i can show you my way of proceeding. I have a lot screenshots that will help you to orienttate yourself in issue: Access Point

    Beck

  • RELEVANCY SCORE 2.76

    DB:2.76:Max No. Of Applications On Accesspoint z1



    Hiii All,

    How many max number of applications can be published on the Accesspoint.??

    DB:2.76:Max No. Of Applications On Accesspoint z1


    There is no limit how many applications can be published as long you not running a license with document limitation (for example IAS). You can publish thousands of applications on a SBE with 5 user CALs and then the only limitation is how many docs can be opened before you reach the Hardware limit (CPU / RAM)

  • RELEVANCY SCORE 2.76

    DB:2.76:Dmz Access Restriction zj


    My issue lies in DMZ security. What i have is an ASA5505 acting as my firewall and NAT device. I am NATing ports 21, 80, 9987 and 6667 to servers on my DMZ. The DMZ has its own dedicated interface on my 2621XM router and has an IP address of 10.20.0.254. I want to permit the LAN and Private Wifi VLANs to access the DMZ, but i dont want the DMZ to access anything on my LAN except UDP over port 53 for DNS to my internal DNS servers. I was using the following ACL to acomplish this:

    ip access-list extended DMZPolicy

    permit udp any host 10.10.0.251 eq domain

    permit udp any host 10.10.0.250 eq domain

    deny   ip any 10.10.0.0 0.0.0.255

    deny   ip any 10.30.0.0 0.0.0.255

    deny   ip any 10.40.0.0 0.0.0.255

    permit ip any any

    The issue with this is that no other network can access the DMZ. How can i permit LAN traffic to access the DMZ without allowing vice versa?

    DB:2.76:Dmz Access Restriction zj


    If you're doing this on a router, your better bet would be either CBAC or zone based firewalls. I would recommend ZBF since it's a little more robust than CBAC:

    ZBF:

    http://www.cisco.com/en/US/products/ps6441/products_feature_guide09186a008060f6dd.html

    CBAC:

    http://www.cisco.com/en/US/products/sw/iosswrel/ps183/products_configuration_guide_chapter09186a00800ca7c5.html

    HTH,

    John

  • RELEVANCY SCORE 2.76

    DB:2.76:Edx For Qlikview 11 Using Macro mp



    Hi,

    Anybody have macro to trigger the publisher's EDX task from Accesspoint. I'd like to trigger EDX task on button click from accesspoint. Please help me.

    Thanks.

    DB:2.76:Edx For Qlikview 11 Using Macro mp


    It is not a macro... See this link, it is very detailed and really helpful:

    http://community.qlik.com/docs/DOC-2650

  • RELEVANCY SCORE 2.76

    DB:2.76:Accesspoint Not Accessible From Other Systems In Qlikview Server-11 89



    Hi All,

    I am trying to access the accesspoint from my system and it is not working, it is giving me a message "nternet explorer cannot display the page" (the network connection is fine, I'm able to access the qmc link from system). The accesspoint works fine in the server where it is installed, I go click on accesspoint from programs i can see all the applications. But not from any other system. Need urgent help Thanks in advance :-)

    Regards,

    Viraj

    DB:2.76:Accesspoint Not Accessible From Other Systems In Qlikview Server-11 89


    The issue was with the port, my port 80 which is used by accesspoint was used by some other services, so i created another rule in the firewall settings for port 80 and it solved the issue. :-)

  • RELEVANCY SCORE 2.76

    DB:2.76:Single Ip 5505 - Dmz Clients Cant Https To Natd Exchange Server 83



    I have an ASA 5505 with the base license, which I setup a DMZ interface on for WiFi clients.  When I setup the DMZ interface I had to add the deny access to the inside VLAN.  The DMZ works fine with WiFi on it, but user's iPhones can't get email unless they turn WiFi off.

    I can see a log entry stating that the connection was "denied by ACL from dmz ip/49689 to dmz:external ip/443"

    Is there a simple way to allow HTTPS traffic through the DMZ interface to our internal Exchange server which is NAT'd on the 5505's external IP?

    DB:2.76:Single Ip 5505 - Dmz Clients Cant Https To Natd Exchange Server 83


    You'll need to get a license key I believe. I've only ordered them with the security license, so you could ask Cisco the best way to go about it.

    Please rate if useful...

  • RELEVANCY SCORE 2.76

    DB:2.76:Sync (E.G. With Ovi) Via Wifi (6300i) 19


    Hi out there,

    i've been trying and trying and finally given up to get my Nokia 6300i synched with ovi via WLAN.

    Inet/Email is working on my home-wlan but I didn't manage to configure the accesspoint etc. settings to sync via wifi. It always activates the GPRS connection (which in my case is very cost intensive).

    Help wanted, thanks in advance!

    DB:2.76:Sync (E.G. With Ovi) Via Wifi (6300i) 19

    I have the same problem, even though I just updated the phone's firmware. (I am trying to sync my Google Calendar using goosync.com) When is Nokia going to fix this annoying (and costly) issue?Message Edited by neuenglander on 05-Jan-2010 08:12 PM

  • RELEVANCY SCORE 2.76

    DB:2.76:Username Accesspoint s3



    i want just get the values of username and password while opening(on open action) the application in accesspoint....and i should create a txt file to write a username and password and it should be placed in a common path ex:E:\username.txt....its worked fine in local machine while i opening the application..but its not wirte a log file while open the application in accesspoint...

    pls help

    DB:2.76:Username Accesspoint s3


    use this code in script and then reload after that close your application and then reopen it....

    SECTION Access;

    LOAD * INLINE [

    ACCESS, USERID, PASSWORD

    ADMIN, test1, password

    USER, test2, password

    ];

    Section Application;

    hope it heps you

  • RELEVANCY SCORE 2.76

    DB:2.76:Dmz Help m9



    I am looking for some informaiton on setting up and discussing the basics of a DMZ.

    DB:2.76:Dmz Help m9


    Thanks Sebastan. If you have a config or a link on Cisco.com that would be great.

  • RELEVANCY SCORE 2.76

    DB:2.76:Dmz Design 1x



    Is it preferable to have a dedicated switch for the DMZ, that is, connect a dedicated switch to the DMZ interface of the firewall. Or the second option, tag DMZ ports on the core switches (internal network)? In that case the DMZ interface of the firewall will connect to the core and a DMZ VLAN needs to be defined on the core.

    Any thoughts?

    DB:2.76:Dmz Design 1x


    Are you looking for just server redundancy, meaning if Site 1 FTP Server goes down, the firewalls (in Site 1 Site 2) should now point to Site 2 FTP Server?

    The real kicker is two sets of firewalls using the same public address space, but in different locations. They should have the same NAT translation, but can't so that's another problem. You might have to put load balancers in front. I've attached a diagram that should help. The one part I'm not sure about is the Content Switch fail-over, that would have to be explored. You can put the Content Switches and FWs in a 6500 chassis to save money.

  • RELEVANCY SCORE 2.76

    DB:2.76:Ie Plug-In Issue ma



    Hello Experts

    When he open the AccessPoint at the right side, on the top end he is able to see 'Download IE Plugin'. User has downloaded the plugin but it does not work. In the AccessPoint that 'Open with IE Plugin' is still disable.

    Due to this user is able to see one of the document in the AccessPoint but unable to open it.

    Can someone help me.

    Br

    Anta

    DB:2.76:Ie Plug-In Issue ma


    Hi Arunesh,

    My issue was solved. User did the mistake that she is trying to open that document in Firefox thats not able to see IE option.

    Br

    Anta

  • RELEVANCY SCORE 2.75

    DB:2.75:Creating Default Selection In Accesspoint mc



    Hi,

    I want to create dynamic default selection in a QV report in Accesspoint. Is it possible.

    If i have one specific selection in the report in the accesspoint, then i want to apply the same selection as default selection for the rest of the users, while opening the report.

    Can anyone help me on this.

    Thanks Regards,

    Sankar

    DB:2.75:Creating Default Selection In Accesspoint mc


    i think what michael said works . save the document with default values before deploying in the server..

    when ever the user access the applicaiton the default thing is shown up...........

  • RELEVANCY SCORE 2.75

    DB:2.75:Accesspoint On Mozilla Firefox Not Working 8j



    Hi All,

    I access the accesspoint link http://10.16.2.17/qlikview/index.htm in mozilla . . . The link changes to http://10.16.2.17/qlikview/login2.htm

    I enter the login credentials, same as the my windows credentials.

    Then it prompts me for login credentials in the accesspoint again. . when i give the same credentials it says wrong id password. . . . snapshot is below

    HELP . . .

    The Accesspoint link works fine on IE and google chrome. .

    Thanks . . . .

    Regards,

    Viraj

    DB:2.75:Accesspoint On Mozilla Firefox Not Working 8j


    Guys. I fixed this issue. Just download latest version. It will uninstall older one automatically and install itself. It keeps your published documents and settings intact.

    Happy Computing

    Best Regards,

    Danny Patel

    Phones : 022 67553255

    +919769 282840

    +919867 898707

    Sent using Blackberry Smartphone.

  • RELEVANCY SCORE 2.75

    DB:2.75:Configure A Second Accesspoint On Two Distinct Servers 9m



    We've got a server called A with :
    - QV Publisher Enterprise 8.50
    - QV Server 8.50
    - One AccessPoint for internal users on AD

    This work very well.

    Now, we tried to create another AccessPoint on another physical server called B. This one to published AJAX pages for external users with custom users. This AccessPoint may be point to server A for Custom User and Server Document.

    So, we have configure another AccessPoint in Publisher with these parameters
    - Path : folder who the documents will be deploy
    - Document URL : qvp://A/documentfolder
    - Ajax Client files URL : http://B/AccessPoint

    Everything work well about publishing AJAX documents with Distribution Task.

    On the B server side, we have :
    - Install QV Publisher (for installed dll) without licence
    - Install QV Server (for AJAX WebPages and dll) without licence
    - Deploy AccessPoint page on http://B/AccessPoint

    About AccessPoint folder, we have changed web.config page to put this parameters :
    - AccessPointBackendIP value = "A"
    - AccessPointBackendPort value = 4994
    - CustomRoleServiceURL value = http://A:8081/qtcc.asmx

    NOTE: everything connection to any port have been accepted on each server !
    FIRST TEST :

    Connect to http://B/AccessPoint

    We put on a login and password of a custom user and we got this message

    Could not validate user because connection to Command Center failed.

    WHY THIS MESSAGE ??

    Thanks for your help !!

    DB:2.75:Configure A Second Accesspoint On Two Distinct Servers 9m


    thomas, ask your favorite sales representative (next desk close to mine) for an extra server licence...

  • RELEVANCY SCORE 2.75

    DB:2.75:After Ios5 Patch, Accesspoint Authentication Very Slow p1



    We recently applied patch to resolve the AccessPoint rendering for iOS5 on QV10SR3. While the patch (http://community.qlik.com/message/157713#157713) was successful, we are noticing that authentication to the AccessPoint (from any client) (i.e. the time it takes to render the AccessPoint page to a user) is VERY slow.

    Is anyone out experiencing the same? Any thoughts around this?

    FYI, the new build after iOS5 patch is 10.0.9088.7.

    Thanks in advance,

    Ben

    DB:2.75:After Ios5 Patch, Accesspoint Authentication Very Slow p1


    Hi Hampus,

    Sorry for the delay in response. I haven't heard back from the client as to the version of IE. Will update ASAP.

    Best Regards,

    Ben

  • RELEVANCY SCORE 2.75

    DB:2.75:Roaming And Airplay/Home Sharing z7


    I have a wifi roaming network with two Dlink dir-600, one of them set to accesspoint mode and the other as normal router with dhcp. They are connected by wire. Ipad and other devices change base stations pefectly and seamless.My problem is apple devices cant communicate via homesharing or airplay when one device (apple tv) is connceted by wire and the other device (ipad) with wifi to the accesspoint base station. But, it strangely works when the ipad is connected with wifi to router base station. It also works when both the apple tv and ipad are connected with wifi to the access point base station, but then on the other hand I cant connect to a wired computer with home sharing....What can I do to solve this?/Erik

    DB:2.75:Roaming And Airplay/Home Sharing z7

    I have still no answer. I think there is a problem with the apple discovery protocol Bonjour when traffic passes more than one accessponit/router.Maybe someone smart could get anything out of this http://blog.packetqueue.net/why-bonjour-hates-my-wireless-network/The next question is. Will this work out with all apple routers/accesspoints??Some clever network guy, please reply!!/erik

  • RELEVANCY SCORE 2.75

    DB:2.75:Enabling Https Link For Qlikview Accesspoint 18



    Hi All,

    Qlikview application by default running on Http.

    http://localhost/qlikview

    We are planning for a Reverse proxy for the accesspoint link. as https.

    Can anyone please advise since the application is running only on port 80 not on 443.

    For enabling Https the application should run on 443 port.

    Please help me on enabing Https Link for Accesspoint

    DB:2.75:Enabling Https Link For Qlikview Accesspoint 18


    There are utilites out that that will help you create the the CSR file. You don't have to use IIS anymore. One of the ones I use is Digicert. DigiCert Certificate Utility for Windows

    Bill

  • RELEVANCY SCORE 2.75

    DB:2.75:Dashboard Doesn't Respond On Access Point? 8f



    Hi,

    I have a couple of dashboards deployed on accesspoint.

    Most of them respond fast enough when accessed through accesspoint except for one.

    The one which is very slow is used frequently by many users.

    The particular qvw works fine when I open it on my desktop,but does not respond or is super slow when accessed via accesspoint.

    Has anyone experienced this kind of issue?

    Thanks

    SM

    DB:2.75:Dashboard Doesn't Respond On Access Point? 8f


    Just found out ,the browser was responsible for the problem.

    Since I upgraded my internet explorer to IE 10 I started facing this issue.

    When I switched to Firefox response was quick

  • RELEVANCY SCORE 2.75

    DB:2.75:Fail To Populate Data On Accesspoint 89



    There are some reports that run very long say 8 hours. The problem is when we reload it is successful in Qlikview server but it fails to populate data on Accesspoint. One more thing is these reports use all the cores of server while running. What could be possible workaround?

    DB:2.75:Fail To Populate Data On Accesspoint 89


    There are some reports that run very long say 8 hours. The problem is when we reload it is successful in Qlikview server but it fails to populate data on Accesspoint. One more thing is these reports use all the cores of server while running. What could be possible workaround?

  • RELEVANCY SCORE 2.75

    DB:2.75:Hp Pavilion Notebook - 15-P112ne Very Low Wifi Signal k9



    Hello,

    Two days ago i have purchased a new HP Pavilion Notebook - 15-p112ne(K1R36EA) with free dos , i manged to insall win 8.1 on it , but i noticed i have a very low wifi signal and sometimes it disconnects from wigi even if am standing infront of the accesspoint , i have removed and add the driver of the wireless card but nothing happen , shall i return to the dealer for hardware problem?

    Mohamed

    DB:2.75:Hp Pavilion Notebook - 15-P112ne Very Low Wifi Signal k9

    Mabdelwahed wrote:
    Hello,

    Two days ago i have purchased a new HP Pavilion Notebook - 15-p112ne(K1R36EA) with free dos , i manged to insall win 8.1 on it , but i noticed i have a very low wifi signal and sometimes it disconnects from wigi even if am standing infront of the accesspoint , i have removed and add the driver of the wireless card but nothing happen , shall i return to the dealer for hardware problem?

    Mohamed

    Hi,

    I don't think they will accept the return because you have changed the OS.

  • RELEVANCY SCORE 2.74

    DB:2.74:Qlikview 11 Accesspoint "Loading Content" 1a



    Hello all,

    Qlikview 11 has been installed in our server instead of Qlikview 10.

    After the installtion, all the services seem to be ok :

    However, when when I try to go on the accesspoint, I have the following message :

    Have you got any idea of this problem ?

    Thanks for your help,

    Best regards,

    Jaymerry

    DB:2.74:Qlikview 11 Accesspoint "Loading Content" 1a


    Add the URL to Local Internet security IE- Tool- Security -Local Intranet - site...-Add

  • RELEVANCY SCORE 2.73

    DB:2.73:Vpn And Overlapping Networks With Dmz k1



    Hi

    I've got an accesspoint (192.168.200.53)connected to a 501 PIX Firewall. On the Firewall I NAT the Accesspoint to 192.168.110.53. The Firewall is connected to a 836 Router where a VPN to a PIX 515 is configured. The 515 PIX has a DMZ with a FTP-Server (192.168.200.200) attached. Currently I am able to reach the accesspoint from the Inside interface of the 515 PIX. But I can't reach the accesspoint from the Server attached to the DMZ. So how can I configure this? Is it possible?

    Regards

    Peter

    DB:2.73:Vpn And Overlapping Networks With Dmz k1


    if i understand the issue correctly, the host tries to access the ftp serve 192.168.200.200 itself has ip under 192.168.200.x.

    so if the other end device can nat/pat the ftp server ip from 192.168.200.200 to 192.168.201.200; whereas the host is also natted to something else.

    i guess this is pretty complicated to setup and troubleshoot. the simple solution is to re-configure the ip scheme.

  • RELEVANCY SCORE 2.72

    DB:2.72:Accesspoint With Airmax On 3c


    what happen when we enable airmax with accesspoint mode

    DB:2.72:Accesspoint With Airmax On 3c

    Non-UBNT clients won't connect.



    WHT = Short Form Acronym for "You couldn't handle me even if I came with instructions!"Well engineered projects are indistinguishable from crazy ideas. Speed, distance, reliability, cost...Pick three....World's First Ubiquiti AirMax WISP....

  • RELEVANCY SCORE 2.72

    DB:2.72:Copy Image To Clipboard Not Working Accesspoint(Qv11-Ajax) fc



    Hi All,

    The option for 'Copy data' ,'Copy image to Clipboard' has been enabled in a bar chart,but it seems not working in Chrome (accesspoint)Chrome .

    Does it is not supported on AJAX..??? If yes please let me know the setting Developer/server as wel.

    Thanks,

    Gargi

  • RELEVANCY SCORE 2.72

    DB:2.72:Dmz Past, Present Future 39


    Hi All, I am new to DMZ so bear with me please. What is Microsoft's take on DMZ? How can I build a DMZ network? What is the difference in Win 2003 DMZ vs Win 2008/R2 DMZ?

    DB:2.72:Dmz Past, Present Future 39

    Hi,
    Here are several pages which related to the question. Specifically, the operation system you need depends on the applications you are going to run on server system. Generally it is always recommanded to use a newer system as Windows 2003 is going to be retired.

    http://www.isaserver.org/tutorials/isa_server_dmz_scenarios.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Which OS to use on DMZ servers
    http://social.technet.microsoft.com/Forums/en-US/winserverPN/thread/d909004e-ddac-4f60-aca3-01b9d75d22d8
    DMZ configuration
    http://social.technet.microsoft.com/Forums/en-US/Forefrontedgesetup/thread/8aeeae44-cf87-43f4-b82d-bafebd6e17f6TechNet Subscriber Support in forum |If you have any feedback on our support, please contact tnmff@microsoft.com.

  • RELEVANCY SCORE 2.72

    DB:2.72:Adapter 1p


    Can a adapter be used on the receiver end or is a wireless accesspoint needed?

    DB:2.72:Adapter 1p

    Can a adapter be used on the receiver end or is a wireless accesspoint needed?

  • RELEVANCY SCORE 2.72

    DB:2.72:Accesspoint Qlikview 11 Conflicting x1



    I have been using Qlikview AccessPoint via the web to create and modify reports without any issues. Once I dowloaded the Qlikview 11 software package, I am no longer able to modify existing reports in AccessPoint. When I right click on a report to get the menu and click on properties, my internet explorer freezes and and I have to shut down the program. When I removed Qlikview 11, AccessPoint worked properly. Does anyone have any fixes for this issue?

    DB:2.72:Accesspoint Qlikview 11 Conflicting x1


    When you install QV Desktop, the OCX that comes with it will take over from the older IE plugin. There may be a version conflict, but you should be able to resolve that. Simply install the old IE plugin again, to reset the OCX registrations.

    Note: this may help but I haven't tested it.

    Peter

  • RELEVANCY SCORE 2.72

    DB:2.72:Dmz Access, Internally sf



    I am using a PIX 506 6.1 (1) with one DMZ IF. This is our first DMZ and I need some help with accessing the web server within the DMZ. We are using a 172.16.0.0 subnet for the DMZ and a 192.168.40.0 subnet internally. The public subnet address in 12.19.xxx.xx. I have added the following commands for the Web server on the PIX:

    static (dmz,outside) 12.19.xxx.xx 172.16.0.21 netmask 255.255.255.255 0 0

    global (dmz) 1 172.16.0.100-172.16.0.110

    nat (dmz) 1 172.16.0.0 255.255.255.0

    I need to access the webserver in the DMZ from the 192.168.40.0 subnet.

    What am I missing? Thanks

  • RELEVANCY SCORE 2.72

    DB:2.72:Accesspoint - No Documents. 8a



    Hi there

    Trying to use accesspoint to distribute documents - when I enter the url into IE I get the page opening but with no documents listed and currently logged in blank.

    Any help on how I can configure this much appreciated.

    Domski

    DB:2.72:Accesspoint - No Documents. 8a


    In QlikView Server Management Console did you set the correct path in the document folder?

    Is your user in your domain? Did you set correctly the permissions on the directory of the qvw documents?

  • RELEVANCY SCORE 2.71

    DB:2.71:Wap54g And Freeradius jp



    I have setup a FreeRadius server, to protect my wifi network with WPA-Enterprise. I configured my Linksys WPA54G accesspoint to use this FreeRadius server for authentication. The odd thing is that the Radiusserver never gets anything from the accesspoint.

    I have another Accesspoint and this one does work. I don't understand what is wrong. Both accesspoints are identical: Linksys WAP54G V3.1 with firmware version 3.05

    I really hope someone can point me in the right direction.

    DB:2.71:Wap54g And Freeradius jp


    Where can I find more information about this method? A tutorial perhaps?

    Thanks anyway

  • RELEVANCY SCORE 2.71

    DB:2.71:Display A Qv Dashbord On A Tv Terminal 3s



    Hi Community,

    I have to display a QV dashboard on a TV terminal.

    I want to access the application from the AccessPoint. My application is reloaded every hour to update the KPIs.

    What about the update from the AccessPoint?

    What is your recommandations to do that ?

    Thanks for your answers

    Franois

    DB:2.71:Display A Qv Dashbord On A Tv Terminal 3s


    Hi,

    Attached document will do the work for you.

    http://community.qlik.com/message/637076#637076

    Regards

    ASHFAQ

  • RELEVANCY SCORE 2.71

    DB:2.71:How To Track Users Who Download From Accesspoint mj



    Is there a way to track the users who download a document off AccessPoint? I do not believe a session is created for download only since the document is not opened on QVS.I am not using borrowed CALs, so I can't test that way either.Any other ideas?Thanks,Phil

    DB:2.71:How To Track Users Who Download From Accesspoint mj


    Hi Vinay

    event log from QVS with high verbosity will have this information. So then you can just load the log file inte a qvw.

  • RELEVANCY SCORE 2.71

    DB:2.71:Accesspoint Document Naming aj



    Hi, I am testing QVS X64 ver 9 SR1 and the use of AccessPoint. We don't have an enterprise edition of QV Publisher so I don't need any solutions using that. My AccessPoint is working just fine and I have sorted all our documents in categories.

    The problem is that the documentnames in AccessPoint are the same as the filenames on the server, for instance item.qvw. I want it to be called "Itemsearch" in the AccessPoint meny without file extentions. Do any of you have a solution where I can name the documents regardless of their filenames?

    I have also tried naming the documents in the Document Properties, but that did not have any effect on AccessPoint.

    DB:2.71:Accesspoint Document Naming aj


    I am testing out QV 10. Publisher is now integrated w/ Server. However, I cannot find anywhere in Management Console or Enterprise Management Console that will allow me to give the document a "Publish As" name. Anyone have an answer about how to achieve this in QV 10?

  • RELEVANCY SCORE 2.71

    DB:2.71:Display User Name On Accesspoint a8



    Is there a way, in Qlikview v9, that Active Directory information can be added to the Accesspoint web page?

    All the users are accessing Qlikview from the LAN, so they have be authenticated through AD. Can Qlikview pull interact with AD using the UID to pull other info, like Display Name?

    Thanks,

    B

    DB:2.71:Display User Name On Accesspoint a8


    Is there a way, in Qlikview v9, that Active Directory information can be added to the Accesspoint web page?

    All the users are accessing Qlikview from the LAN, so they have be authenticated through AD. Can Qlikview pull interact with AD using the UID to pull other info, like Display Name?

    Thanks,

    B

  • RELEVANCY SCORE 2.71

    DB:2.71:How To Create A New Object From Accesspoint In The Document? ks



    Hi All,

    I want to know How to create a new object from Accesspoint in the Document?

    is we need to enable some check boxes?

    Please help me on this

    Regards,

    Rajdeep G.

    DB:2.71:How To Create A New Object From Accesspoint In The Document? ks


    right click somewhere on opened QVW, then in menu select "New Sheet Object" and then qlik on object name that you want to create.

  • RELEVANCY SCORE 2.71

    DB:2.71:Access Qlikview Server From Ipad 8a



    Hi All,

    I am trying to access a qvw in AccessPoint.

    I have downloaded the iPad App and added the AccessPoint details

    http://servername/qlikview/index.html

    but I keep getting an error cannot contact server, I have ticked the box for Mobile Client on the Management Console

    Any ideas?

    DB:2.71:Access Qlikview Server From Ipad 8a


    Hi Alan,

    Have you tried to replace the machine name with the IP address as you ould have a DNS issue ie http://ipaddress/qlikview/index.html. If this works try the fully qualified name for the machine ie http://servername.domain/qlikview/index.html

    Kind Regards,

    Footsie

  • RELEVANCY SCORE 2.71

    DB:2.71:Airplay From Another Accesspoint k9


    I have a question about AirPort Express and AirPlay from another AccessPoint on the same network.The house is three floors, in it I have 1 router and 3 AccessPoint (all on the same network 192.168.1.x). Well, I'd buy an AirPort Express to use it on the first floor in AirPlay mode (audio connectors are on the first floor) ...The question is how I can use AirPlay from the second or third floor connected to Wi-Fi from other AccessPoint?

    DB:2.71:Airplay From Another Accesspoint k9

    I have a question about AirPort Express and AirPlay from another AccessPoint on the same network.The house is three floors, in it I have 1 router and 3 AccessPoint (all on the same network 192.168.1.x). Well, I'd buy an AirPort Express to use it on the first floor in AirPlay mode (audio connectors are on the first floor) ...The question is how I can use AirPlay from the second or third floor connected to Wi-Fi from other AccessPoint?

  • RELEVANCY SCORE 2.71

    DB:2.71:Accesspoint Homepage Edits js



    Currently my AccessPoint homepage which displays all available documents (portal apps) has a custom logo on it representing our company. This logo has been changed since this page was built. How do I edit this logo? I assume its just an HTML page?

    Also, the URL for the AccessPoint homepage displays the exact server it is located on, is there a way to "mask" this URL path?

    DB:2.71:Accesspoint Homepage Edits js


    On the server where access point is installed go to the path: C:\Program Files\QlikView\Web\images

    and replace the file called Logo_main.png

    That is the file accesspoint uses for the logo

  • RELEVANCY SCORE 2.71

    DB:2.71:Deskjet 3050 Will Not Connect To Wifi. Claims To Not Receive An Ip sj



    I am unable to connect my HP Deskjet 3050 to a wireless access point. Every time I try, it waits for a long time and then claims to not receive an IP address. The router works flawlessly with every other device I own. Just to be sure, I tried another accesspoint, with the same results.

    The accesspoint is protected with WPA2. The SSID does not contain spaces (as someone else on the forums pointed out HP does not like).

    I have tried this from Ubuntu 11.04 with hplip toolbox, but this simply claims not to be able to connect to the printer. Under Windows XP it works, but setting up the wireless connection fails because the printer claims DHCP did not succeed.

    DB:2.71:Deskjet 3050 Will Not Connect To Wifi. Claims To Not Receive An Ip sj


    I am unable to connect my HP Deskjet 3050 to a wireless access point. Every time I try, it waits for a long time and then claims to not receive an IP address. The router works flawlessly with every other device I own. Just to be sure, I tried another accesspoint, with the same results.

    The accesspoint is protected with WPA2. The SSID does not contain spaces (as someone else on the forums pointed out HP does not like).

    I have tried this from Ubuntu 11.04 with hplip toolbox, but this simply claims not to be able to connect to the printer. Under Windows XP it works, but setting up the wireless connection fails because the printer claims DHCP did not succeed.

  • RELEVANCY SCORE 2.71

    DB:2.71:Wifi Programing On Windows Mobile sf


    Hello all,I would like to create an application on windows mobile 6.0.The app is connecting to the given AccessPoint but in 5-10 second it disconnects and I don't know why.The program is using OID_802_11_INFRASTRUCTURE_MODEOID_802_11_AUTHENTICATION_MODEOID_802_11_ENCRYPTION_STATUSandOID_802_11_SSID - after this command the connection is established for 5-10 seconds.Can someone help to me or has anyone any C++ sample code for the Wifi connection building?Thanks,Buxi 
     

    DB:2.71:Wifi Programing On Windows Mobile sf

    Hi Buxi,
    Please refer to following thread:
    http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=998656SiteID=1
     
    Best regards,
    Guang-Ming Bian - MSFT

  • RELEVANCY SCORE 2.71

    DB:2.71:Cg814wg Enabling Dmz ax


    Ya, I do plenty of gaming on my computer and my router sorta hates them. After a while, I learnd about DMZ (Demilitarized Zone). Does anyone know how enable DMZ on a CG814WG router? I went to help and it told me to press "Connected Computers" and select the computer to add from the list.I clicked the botton, but nothing was there. Any help? I'm treing to get DMZ enabled for StarCraft.

    DB:2.71:Cg814wg Enabling Dmz ax

    thereal12007 wrote:Ok, to see if this would work, can someone give me instructions to check if my router has TCP\IP protocols installed and can provide 32-bit applications? It says that on my game.Of course your router understands TCP/IP, that's the protocol used on the Internet. It wouldn't work otherwise. 32-bit applications is meaningless in this context. What you need to do is place the PC running the server in the DMZ, or better yet and more secure, port forward the proper ports for the game server software to the PC running the game server. You then tell folks the IP address of your router's WAN interface and tell them to have a ball. So any incoming connections on those game ports to the router get forwarded to your game server and it talks to the clients. The router just sits in the middle and shuffles packets back and forth, invisibly.

  • RELEVANCY SCORE 2.70

    DB:2.70:Google Heat Maps Not Working On Accesspoint zd



    Hi All,

    I am using google heat map extension from the below link.

    http://community.qlik.com/message/376254

    The chart works fine in the desktop version but its not shown in the accesspoint.

    Also the heat layer does not work in desktop version.

    QV version is 11.2 SR2, IE 8

    Please help

    DB:2.70:Google Heat Maps Not Working On Accesspoint zd


    Hi Sarang Mehta,

    The .qar file format is associated with QlikView and will automatically install the Extension to the correct location. However, to install the .qar file on a server must be set up manually. The steps are simple.

    1. Rename the .qar file to .zip

    2. Unzip the file

    3. Place all the folders in a location equivalent to "%ProgramData%\QlikTech\QlikViewServer\Extensions\Objects\"

    If you do not see necessary folders, please create them accordingly.

    Regards

  • RELEVANCY SCORE 2.70

    DB:2.70:Modification To Accesspoint Error When No Cal Assigned 98



    Hi All,

    Does anyone know how to customize the error message that pops-up when someone is trying to open a .qvw application on the AccessPoint.

    The standard notification is attached.

    Thanks,

    H

    DB:2.70:Modification To Accesspoint Error When No Cal Assigned 98


    I would like to customize it because it's the error a user gets after being logged out. We have a custom login page and when the user logs out from the login page, they are also logged out of the QlikView app by expiring the AccessPointSession cookie.

    The error message is correct (there is no CAL, because no user is logged in), however from a user experience perspective, we don't want them to get this CAL error, but instead something more friendly like: "You are not currently logged in. Please login."

  • RELEVANCY SCORE 2.70

    DB:2.70:Qvw Does Not Show Up On Accesspoint mx



    Hi

    I do not see my qvw that I created using a personal edition of Qlikview in the Accesspoint. I have evaluation license of the server and want to use the qlikview app to view my custom build qvw dashboard. The only report I see are the standard ones that come with the Accesspoint. I even moved my qvw file to the same folder as the other files but still accesspoint does not see my report. Any ideas ?

    Thanks

    Vikram

    DB:2.70:Qvw Does Not Show Up On Accesspoint mx


    Hi

    I do not see my qvw that I created using a personal edition of Qlikview in the Accesspoint. I have evaluation license of the server and want to use the qlikview app to view my custom build qvw dashboard. The only report I see are the standard ones that come with the Accesspoint. I even moved my qvw file to the same folder as the other files but still accesspoint does not see my report. Any ideas ?

    Thanks

    Vikram

  • RELEVANCY SCORE 2.70

    DB:2.70:Is There A User Guide For Accesspoint? c1



    Is there some sort of user guide for the end users of AccessPoint? I'm not finding any documentation or guides on this.

    DB:2.70:Is There A User Guide For Accesspoint? c1


    There isnt really a requirement is there ? Just click the icon for the application you wish to open....

  • RELEVANCY SCORE 2.70

    DB:2.70:Nanostation M5 Nanostation M5 Picostation Wifi Ap pk



    Hi,

    I tried and failed.

    Goal is to bridge a distance of 100 yards from our house to the gate and create a WiFi accesspoint. Possibly also a webcam.

    I managed to connect both Nanostations. But I cant access the internet.

    I would greatly apriciate some advice about the network settings on each end to I can access myLAN and the internet from the gate.

    Thanks,

    Rogier

    DB:2.70:Nanostation M5 Nanostation M5 Picostation Wifi Ap pk


    Set AP as Access Point WDS in bridge mode

    Set Station as Station WDS in bridge mode

    With DHCP enabled on a laptop can you plug into LAN on Station PoE injector and see the local network and the internet?

    From what you have said prior I would say that your Gateway address is 192.168.1.254 not 192.168.1.1 but if DHCP is enabled at the Station withWDS across the link it will see it.





    UK Comms Links Engineer.

    Come on you lot, Feel free to 'Mark as Solution' At least click the Kudos button. Thanks.
    Top Solution Authors Leaderboard

  • RELEVANCY SCORE 2.70

    DB:2.70:Accesspoint Shouldnot Join Wlc cf



    Hi

    I have WLC which is having 70 accesspoint associated with it.The model num of accesspoint is 1242.But if any one from outside bring one same model of accesspoint and tried to connect it should not connect.Did any one knows how to configure the controller for this or any other option.

    DB:2.70:Accesspoint Shouldnot Join Wlc cf


    One other thing you can do is to make sure you remove option 43 from dhcp, remove dns entry if one was configured, remove any dhcp scope on the subnet the management and ap manager is on, disable otap on the wlc, and remove any ip-helper that is pointing to the wlc. All these features are to help LAP's find the WLC so that they can be part of your WLAN. Once your LAP's are up, there is no reason to have these still configured.

  • RELEVANCY SCORE 2.70

    DB:2.70:Alignment Problem On Accesspoint Ajax Zero Footprint Client. pj



    Hi,

    We have developed a QVW file and when we host it on web server and try to access through accesspoint AJAX Zero Footprint client ,

    what we observed is while viewing thru accesspoint dashboard missed the alignment of objects i.e. some objects gets overlapped etc.Although when we see it on desktop in QlikView file looks good all the objects are well aligned.

    Any solution for this?

    Thanks

    Swapnil

  • RELEVANCY SCORE 2.70

    DB:2.70:Tecra 9100 Wifi And Port's Name zc



    dear All,

    please help me, i have TECRA 9100 and wifi driver already installed but cant detect any signal from arround accesspoint (acces point is available and switch wifi is on), just want to know what this port used be? the port near slim select bay release switch. like this pict...

    Please Advice me guys,

    Best Regards,

    Umar

    DB:2.70:Tecra 9100 Wifi And Port's Name zc


    The area that you have pointed to on the picture is a cover for access to the Bluetooth card or to add a Bluetooth expansion board .

    The Wireless DeviceName :- Intel(R) PRO/Wireless 2200BG Network Connection

    Location Details :- PCI bus 2, device 10, function 0

    Hope these are the answers to your question and help you .

    Copper_Knob

  • RELEVANCY SCORE 2.70

    DB:2.70:Usb Wifi Card Supported On I.Mx6 Linux 71



    Dear community,

    We have a use case for using an i.MX6 based board running embedded Linux to read from a MIPI camera and then transmit video over wifi.

    Couple of questions:

    1. Would you know of any USB wifi cards currently supported by Freescale or 3rd party Linux BSP for i.MX6?

    2. Would that driver support the card to be used as an accesspoint or in ad hoc mode (since the board needs to act as a video transmitter)?

    Or is there any other i.MX6 Linux based solution which will meet the requirement of the use case?

    Thanks

    DB:2.70:Usb Wifi Card Supported On I.Mx6 Linux 71


    Dear community,

    We have a use case for using an i.MX6 based board running embedded Linux to read from a MIPI camera and then transmit video over wifi.

    Couple of questions:

    1. Would you know of any USB wifi cards currently supported by Freescale or 3rd party Linux BSP for i.MX6?

    2. Would that driver support the card to be used as an accesspoint or in ad hoc mode (since the board needs to act as a video transmitter)?

    Or is there any other i.MX6 Linux based solution which will meet the requirement of the use case?

    Thanks

  • RELEVANCY SCORE 2.70

    DB:2.70:Qmc Reload V Accesspoint 77



    Hi All,

    Is it possible to have a file available for reload from the QMC status or document tabs on the QMC console, but not have the file display in the AccessPoint?

    DB:2.70:Qmc Reload V Accesspoint 77


    There isn't an option not to show a file or a folder in accesspoint (to the best of my knowledge) you should handle that by file permissions.

    With that said I hope QT does add a flag somewhere to hide either mounted folders or applications in future versions (SR3? fingers crossed).

    Regards,

    Daniel

  • RELEVANCY SCORE 2.70

    DB:2.70:Zone-Base-Firewall Nat Issue p7



    Hi Everyone,

    I'm having a big issue with Nat on my 3925 router.

    Currently I have 4 interfaces (Internetl, LAN, DMZ Wifi (which is isolated except for a vew exceptions) on my router which is setup using zone pairs:

    Internet - LAN, Internet - DMZ,  Internet - Wi-Fi,

    LAN - Internet, LAN - DMZ, LAN- Wi-Fi

    DMZ - Internet,  DMZ - LAN, DMZ - Wi-Fi

    Wi-Fi - Internet, Wi-Fi - LAN, Wi-Fi - DMZ

    NAT is setup to translate some external IP address to internal IP address both in our LAN and DMZ, basically the image below

       

    and all seem to work however when the issue arise when I use a laptop/device in the Wi-Fi network to access a server in the LAN or DMZ by accessing it external IP address, ie Wifi Laptop IP 172.16.10.10 trying to access 150.148.130.52. The device is unable to access but if an external user trys to access 150.148.130.52 they are able to.

    I think the issue is maybe due to the NAT/ZBFW rules maybe trying to access across the Wi-Fi - DMZ zone pair rules instead of going Wi-Fi - Internet, then Internet - DMZ and back. but it just seem to trop the traffic?

    Has anyone come accross this issue before? Im sure you most be able to do this as people access there webmail fine on internal and external networks with out the need for DNS translations.

    Can any one help?

    DB:2.70:Zone-Base-Firewall Nat Issue p7


    please post your config, or at least:

    show run | sec zone

    show run | sec policy-map

    show run | sec ip nat

    show ip nat translations

    i suspect it is NAT issue.

    Mashal