• RELEVANCY SCORE 3.61

    DB:3.61:Cs4 Premier Pro Dynamic Link To Encore Question zf





    I have DL'ed (Dynamic Linked) a project in PP CS4 to Encore CS4 and it worked just fine except that in the sequence in PP CS4 I edited some of the audio tracks with render and replace using Sooundbooth CS4. The audio effects I added in Soundbooth CS4 played back as encoded in PP CS4 on the time line but not in the final product from Encore.

    What would have caused this? Can added effects in Soundbooth be DL to Encore CS4 or do I have to render out in PP CS4 then pull the assets to Encore?

    Much thanks in advance for assistance.

    DB:3.61:Cs4 Premier Pro Dynamic Link To Encore Question zf


    Interesting indeed I will look this over but it was indeed greyed out

    which I too thought wasn't right.

    Thanks so much again!!

  • RELEVANCY SCORE 3.52

    DB:3.52:Audible Click Between Audio Clips df





    Running PP 5.5. Editing an AVCHD project with seperately-recorded WAV audio files. Dropping the various audio clips of the various scenes into the timeline and I keep getting clicks between the audio clips upon playback and export. There are no empty frames between the clips, nor any overlapping clips. Even looping a single audio clip in Audition results in a click at the beginning of each clip. In either PP or Audition the clicks are only audible when playing normal speed. Scrub through the timeline with the arrow keys and the clicks are not present.

    Ramping up/down the gain at the head/tail of the files still results in clicks between the clips. Doesn't matter if the clips are in the same track. It seems to be a file access issue and not an actual audio track sound, except that when I export the movie the clicks become part of the audio track of the exported movie. Except for these audio clicks everything is working perfectly.

    I just upgraded from PP CS4. Opening up a copy of this project in PP CS4 and I have no audio clicks.

    I'm stumped...

    Any ideas?

    Thanks in advance.

    I have a very fast computer:

    i7 - 980x

    24GB RAM

    Dual SSD HDD's in raid 0 for OS

    Quad 2TB 7200RPM HDD's in raid 0 for files

    Dual GTX 460 Fermi Video Cards

    PP 5.5 (5.2) Legit

    W7P x64

    DB:3.52:Audible Click Between Audio Clips df


    Audio is encoded in samples per second (e.g. 48000) and video is played back in frames per second (e.g. 24). There are significantly more audio samples than there are individual video frames and Premiere cuts to the nearest video frame, so there may be instances where the cut point occurs in the middle of a very short sound that you would have barely noticed in the full-length recording.

    This is a problem I have experienced in all NLEs; it is not just limited to Premiere. The easiest way of solving it is to add a short cross-fade at the beginning of the audio clip.

  • RELEVANCY SCORE 3.52

    DB:3.52:No Library Or Style Items For Menus And Buttons A.En. Cs4 7m




    Hi All,
    I recently installed AMC CS4:PP CS4 Ver.4.0.0,PS CS4 extended Ver.11.0,
    AEn Ver.4.0.0.258,AE Ver.4.0.0,ASB CS4 Ver.2.0.The install seem to have
    went ok.But,when I launch Encor I see no Items in the library and style
    categories.I looked in the C:Program files\adobe\adobe encor.I see no
    Library Folder.I also checked the install/uninstall option in the
    control panel and the Adobe PP CS4 Functional content seems to have
    installed it shows 275.5 mb.System:Win XP Pro W/SP3,CPU Intel i7 2.67,
    Ram 3Gig ddr3,H.D.'s OSPrograms WD Raptor 300gig 10,000 rpm,A/V 2 WD750
    raid0,Export WD 750.I installed from disk.Hope I don't have to a complet
    reinstall.Need Help.
    Thanks,
    Barry

    DB:3.52:No Library Or Style Items For Menus And Buttons A.En. Cs4 7m

    Barry,

    You may actually be ahead on this one. It *seems* that some of the Functional Content in CS2 was removed in later versions. Do not know if they offered more, but different content.

    Hunt

  • RELEVANCY SCORE 3.43

    DB:3.43:Pp Audio Lost In Playback k7


    Mac Power Point 2011

    DB:3.43:Pp Audio Lost In Playback k7

    Check Jims post in another thread:
    http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macpowerpoint/audio-and-playback-presentation-problesm/9f45eb2f-9cbc-4514-bdcb-52fa7766a9f3

  • RELEVANCY SCORE 3.43

    DB:3.43:Unable To Re-Edit Video Via Dynamic Link am



    I have Adobe Premiere CS4, updated to 4.2 lately. I am able to import a PP sequence into Encore via Dynamic Link (DL). This works fine and I can burn off a DVD, but when I go and edit something in PP the changes are not reflected in Encore. The only way I can see the changes is by deleting the PP sequence in Encore and re-import it via DL. This is OK but means that the sequence needs to be transcoded again and so takes another hour+ to finish.

    I tried the following solution that I found via the Internet but it does not work for me:

    Solution: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:Program FilesCommon FilesAdobedynamiclink. Detailed Steps: Close all Adobe applications. In Windows Explorer, navigate to C:Program FilesAdobeAdobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:Program FilesAdobe, then navigate to your custom installation location.) Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut. Rename the newly created shortcut to just Premiere. Important: The name of the shortcut must be exactly Premiere with no other characters.

    DB:3.43:Unable To Re-Edit Video Via Dynamic Link am


    That would indicate it alerady IS the original. All you need do now is retranscode.

  • RELEVANCY SCORE 3.28

    DB:3.28:Dropped Audio And Frames In Cs4 Preview Playback ks



    Raid 5 HDD's Intel i7 12GB's RAM and yet CS4 still drops frames and partial audio in the preview playback mode, avchd format, so it's the software?

    DB:3.28:Dropped Audio And Frames In Cs4 Preview Playback ks


    OK.

    Why it is yellow? Are there any effects? Is there a mismatch between the clips and the sequence?

  • RELEVANCY SCORE 3.23

    DB:3.23:Audio Out Of Synch In Prem Pro Cs4 After Editing In Soundbooth d9



    This is using the Mac version of Premiere Pro CS4 and Soundbooth. I Premeire, I choose to edit the audio portion of a clip in Soundbooth. In sound booth I just add some compression or other sweetening and save it (only adding effects no cutting of the audio or anything). When I save it and go back to Premeire, the audio is out of synch. Also this seems to happen intermittently not everytime.

    Any ideas?

    The audio in premiere is part of a video clip and is 48K 16bit.

    DB:3.23:Audio Out Of Synch In Prem Pro Cs4 After Editing In Soundbooth d9


    This is using the Mac version of Premiere Pro CS4 and Soundbooth. I Premeire, I choose to edit the audio portion of a clip in Soundbooth. In sound booth I just add some compression or other sweetening and save it (only adding effects no cutting of the audio or anything). When I save it and go back to Premeire, the audio is out of synch. Also this seems to happen intermittently not everytime.

    Any ideas?

    The audio in premiere is part of a video clip and is 48K 16bit.

  • RELEVANCY SCORE 3.20

    DB:3.20:Exporting From After Effects To Pp Cs4 kk



    I imported a video to AE and added my ellipse effects to some adjustment layers. I then exported to PP and saved the file to my desktop. When I went to open the edited video in PP and the following message read:

    /Users/**name**/Desktop/highlight with effect.prproj

    Video Filter missing: AE.ADBE ELLIPSE

    I am pretty sure I understand what the message is saying, but I have no idea how to fix it or how to go about it. This is not a file I don't want to be able to lose, spent a good amount of time working on it.

    DB:3.20:Exporting From After Effects To Pp Cs4 kk


    That msg indicates to me that you copied the ai comp to a timeline in Pr; and Pr doesnt have the filter you used in Ae.

    Instead; I suggest you use dynamic link and forgo the need for any copy/pasting or exporting.

    To start over; select the clip in question on the Pr timeline, right click and choose Replace with AE Comp.

    Add the effects in AE, save and close. Switchback to Pr, and the clip will now be am AE Comp Dynalically linked to Pr.

  • RELEVANCY SCORE 3.18

    DB:3.18:Ps Cs4 Extended...Audio During Editing... No Audio In Rendered Video Clips Playback?? 7x



    Hi I am running Cs4 Extended using PS on a 64 Bit Win 7 computer. I am able to import video and edit it and the audio is there while editing. But no matter what I do when rendering the video clips I get no play back audio just the video. I just loaded onto this new computer I know I did video on my old computer with no problems. is there a default setting that is blocking the audio to be rendered with the video. Thanks for any help.

    DB:3.18:Ps Cs4 Extended...Audio During Editing... No Audio In Rendered Video Clips Playback?? 7x


    One more thing to try first, take the rendered video from the first computer and play it on the 32 bit computer and see if the sound is really there or not. That should tell you either the sound did not get rendered with the video or it did. If it did, then you have an audio issue with your sound card if not, then something with photoshop and or quicktime. But it kind of sound like a codec issue.

  • RELEVANCY SCORE 3.18

    DB:3.18:Pp Cs4 Will Not Play Clips az



    PP refuses to play any clip on the timeline. I have tested several different clips from different sources with no change.

    Computer:

    i7 860

    6 GB RAM

    ATI Radeon 5670 ATI Radeon 5450 (ATI Technologies Inc. driver version 8.850.0.0 on both cards) running three monitors

    Win 7 pro x64

    No apparent changes made when problem surfaced. Have encountered problem before, but a full reinstall of PP fixed the issue. Wondering if there is anything else I can try that might be less time consuming.

    Thanks in advance!

    Labrasic

    DB:3.18:Pp Cs4 Will Not Play Clips az


    Sorry that the latest Catalyst driver did not fix things for you.

    Referencing some of the OpenGL issues with a newer Catalyst driver (do not recall the version), the "fix" was a roll-back. If I can find that version #, I will post it. It might be helpful, or it might not.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.14

    DB:3.14:Cs4 - No Audio When Importing An Avi Or Mpeg j3



    Hello I am trying to figure out why there is no audio when I import an avi created with Fraps. The audio is in the avi made from Fraps but when I import it to premiere pro CS4 - there is no audio during playback. I checked all the audio hardware settings, I dont know what else to do.

    DB:3.14:Cs4 - No Audio When Importing An Avi Or Mpeg j3


    While not particularly FRAPS, this ARTICLE will give you some pointers on other video-capture programs.

    As John points out, there are several FRAPS threads to draw from too.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.14

    DB:3.14:Can You Get Chapters Out Of Pp Into Encore If It Is A Dd5.1 Blu-Ray? 73



    This is a minor item however annoying.

    I make 5.1 DD audio HD Blu-Ray discs. Therefore, I cannot use dynamic link (cannot believe this is STILL not fixed even in CS5, but anyway...) so I have to export my video and audio out of P Pro (I use CS4) and then import into Encore.

    Am I correct that however I import into Encore:

    1) As an asset into Encore separately for both the 5.1 audio and video and the select both and right click to create a timeline.

    or

    2) Import the Video (with no audio) directly as a timeline and then import the 5.1 audio as an asset and add it to the timeline.

    Regardless, neither method keeps the chapter marks that were made in P Pro. Again, not a big deal but it would be nice.

    It is so frustrating that as Adobe touts their 5.1 and Blu-Ray capability that they have still have not made it seamless with dynamic link.

    Thanks,

    BJBBJB1

    DB:3.14:Can You Get Chapters Out Of Pp Into Encore If It Is A Dd5.1 Blu-Ray? 73

    My understanding is with Dynamic Link I would have the added benefit of not having to do that because then the transcoding WILL take place in Encore.

    You transcode in Encore using either the Encore transcoding engine or AME. But with DL, you can easily make changes in PR, so you still want to wait till the end to transcode. If you transcode and then make more changes, you have to re-transcode.
    As far as feature request, I would be less worried about chapter marks carrying over than having an integrated dynamic link process for 5.1 projects.

    I hear that.

  • RELEVANCY SCORE 3.13

    DB:3.13:No Sound In My Clips; Cs5 pd



    I am importing m2ts clips from my Pan. TM700 camcorder, but PP doesn't see any audio in the files.

    They play fine in Windows MP, and the windows properties dialog box says thay have a 256kbps stream, but in the PP properties box, there doesn't seem to be any audio.

    Any ideas?

    Thanks,

    ~Zach

    DB:3.13:No Sound In My Clips; Cs5 pd


    Great news! Hope that the success continues.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.12

    DB:3.12:Premiere Pro Cs4 Dynamics Audio Effect Problem? pf



    Has anyone experienced problems with the Dynamics Filter in PP?

    For some reason the audio clip that the effect is applied to suddenly quits working at a point in the clip where there is a sudden peak.

    If this sounds familiar to anyone I can provide more detailed info about hardware/etc. if necessary.

    DB:3.12:Premiere Pro Cs4 Dynamics Audio Effect Problem? pf


    Has anyone experienced problems with the Dynamics Filter in PP?

    For some reason the audio clip that the effect is applied to suddenly quits working at a point in the clip where there is a sudden peak.

    If this sounds familiar to anyone I can provide more detailed info about hardware/etc. if necessary.

  • RELEVANCY SCORE 3.12

    DB:3.12:Cs4 Crashes When Opening A Pp Project Saved On Another Identical Workstation jm



    Hello,

    I have 2 identical computers Running PP CS4 in seperate buildings. When I copy a project to a USB flash drive or network drive from workstation A and copy it on to workstation B, the project acts like it successfully loads and at the very last second when you can see the timeline and everything it crashes out.

    My system: PC - Intel Core 2 DUO 3ghz processor (E7500) with 2 gigs RAM - Lexicon Lambda usb audio interface - NVIDIA GeForce 9800 GTX + video card on windows xp pro service pack 2. Premiere pro cs4 version 4.2.1. I went throught the steps in the "Guide to an effective question" and per the instructions there I have attached links to the DXDiag results, MSINFO32 results, and screenshots of a couple of the screens in Process Explorer: (these screenshots are from workstation B, where I'm trying to open the project file and it crashes)

    http://docs.google.com/leaf?id=0B-VxJq-F9J_cYTVjNWEwNTktMTEzZi00ZmUyLT k5MTgtZWQxZTUxMzNhYzE2hl=en

    http://docs.google.com/leaf?id=0B-VxJq-F9J_cYjQ2ZGY2Y2EtZmQ5Mi00ZGFhLT lkYjgtYjZiODIxODg1NjYzhl=en

    http://docs.google.com/leaf?id=0B-VxJq-F9J_cOGExNzc0ZGItZjkzZS00MTkwLT k0MWQtYWZmODYyYTg2MDcyhl=en

    http://docs.google.com/leaf?id=0B-VxJq-F9J_cZjI2MDFlNDQtYTJlYi00MWE5LW FhYTYtYTk5YjY0YmY5YmMwhl=en

    http://docs.google.com/leaf?id=0B-VxJq-F9J_cNzlkYTYwNGYtMDBlYi00OGQ0LT gwMDItZTJiMGJjNDYyNjkwhl=en

    I know alot more info will probably be needed to come up with a definitive answer, If I'm missing any info please ask and I will provide. Thanks in advance.

    DB:3.12:Cs4 Crashes When Opening A Pp Project Saved On Another Identical Workstation jm


    2 identical computers

    Hmm... if they are EXACTLY identical, there is something you might try as a LAST CHANCE (not to be done lightly, since hardware signatures will likely mean that you have to RE-authorize Windows and all software)

    Buy http://www.terabyteunlimited.com/image-for-linux.htm (or your disk imaging software of choice)

    Make a drive image of GOOD computer to USB hard drive... ditto for BAD computer

    After both images are made, write the GOOD image onto the BAD computer's drive and test

    If all works well (after any RE-authorizing due to any hardware signatures) you are good to go

    If things do NOT work well, simply write the BAD image back to the BAD computer and you are back to where you started

    Do not attempt this unless the two computers really are EXACTLY identical !!!!!

  • RELEVANCY SCORE 3.11

    DB:3.11:Playback Problems: Adobe Premiere Pro Cs4: Windows Xp Pro X64 cj



    no playback at all in Windows XP PRO x64

    then i turn off audio input in ASIO (audio hardware) now i can playback without any problems.

    Hp xw8200

    FX 1700

    Windows XP PRO x64 sp2

    Premiere Pro CS4 v4.1

    DB:3.11:Playback Problems: Adobe Premiere Pro Cs4: Windows Xp Pro X64 cj


    John is correct - Premiere Pro CS4 is not certified to run on WinXP64. However, I would try a lot of things before switching the OS (unless it's convenient). XP64 does work for many people - Adobe just doesn't officially support it.

    Dennis

  • RELEVANCY SCORE 3.11

    DB:3.11:Surcode 5.1 Encoding - Multiplex Or Not? xa



    I have received great help here with my 5.1 surround mix and also encoding. I use PP and Encorse CS4 and I am trying to clarify a setting in the SurCode Media Encoder which I am using to get from PP to Encore for a Blu-Ray disc.

    Minnetonka seems to state that it is okay to Multiplex the audio and video in media encoder and import them into encore as one. I understand you cannot listen to the 5.1 track in any event in Encore but I have no issue with that.

    However in some posts I have seen, I had read that you needed to render the audio and video separately if you are doing 5.1 and to NOT multiplex them in Media Encoder. Perhaps this depends on what version of PP you are running? Any clarifcation most appreciated. If it could be multiplexed, I guess that is one less chance to have an issue with audio Sync.

    Also, I have the Manual for Surcode but is there somewhere where recommended settings for 5.1 endoding by Surcode are posted? For example Data rate, etc.?

    Thanks,

    BJBBJB1

    DB:3.11:Surcode 5.1 Encoding - Multiplex Or Not? xa


    Actually, when one first opens up the SurCode settings in MPEG, the default settings are pretty good. I only had to do a few tweaks. Now, if one makes a bunch of changes, I am not sure how one would get back to those, exactly, unless they took notes.

    Now remember, PrPro will let you monitor your DD 5.1 SS, but Encore will not. It handles the DD 5.1 SS AC3, but ONLY in pass-thru mode. I don't want you to become alarmed, when the 5.1 disappears in Encore and you think something is amiss. The DD 5.1 SS will write to your DVD/BD just fine, but you cannot monitor it in anything but stereo, while in Encore.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.08

    DB:3.08:Is There No Precision Nudging In Pp Cs4....No Way...How Can You Work? a8


    I'm working on a project and I need to nudge an audio clip to match up with another audio clip that is part of a video clip....I can nudge down to one frame at a time precision and no better....yes snap is off....I need to nudge about 1/4 a frame or less to get the audio to be exactly in sink....can't seem to do it or find out how to get this kind of precision nudging....looked all over the web and in the forums...... is there a way?

    Also what's the deal with the wave form sort of graying out when you attempt to move an audio or video track for that matter....you can't see the wave form to use it as a guide to match it up with other existing audio or video tracks.........is Adobe really still that far behind in software development?

    Man I hope there is an answer for all of this if not then I'll probably have to do the audio part of the project in Nuendo and bring it all back into Premiere....if that's the case what kind of work flow is that....not productive for sure.

    DB:3.08:Is There No Precision Nudging In Pp Cs4....No Way...How Can You Work? a8


    I have requested that as a feature HERE several times. Maybe your "vote" will tip the scales. So far, no luck. Maybe PrPro CS5?

    Good luck, and happy editing,

    Hunt

  • RELEVANCY SCORE 3.08

    DB:3.08:Audio Scrubbing In Encore Cs4? 8c



    It would be very helpful to have audio scrubbing, as I am trying to adjust subtle timing issues for subtitles. Is there any way to get audio scrubbing in Encore CS4?

    DB:3.08:Audio Scrubbing In Encore Cs4? 8c


    Sorry that I did not give a bit more detail on that klugey workaround. For what you are doing, it is imprecise and takes a few tries to get the point correct. Thanks for pointing out not only your desire, but your use for the feature.

    Good luck with the feature request,

    Hunt

  • RELEVANCY SCORE 3.07

    DB:3.07:Audio Does Not Display In Timeline a1


    I am using Windows 7 and CS4. I am making a still photo collage. I am attempting to add music.
    I cannot see a waveform or any sign of the audio in my timeline when I drag it to the audio line. The audio plays, but I have no idea where it starts or ends so I cannot edit to fit the video timeline.
    I have done this many times in the earlier versions but this is my first attempt in CS4. Am I missing something here?
    thanks in advance for your help

    DB:3.07:Audio Does Not Display In Timeline a1


    Thank you Jim. I found that when I moved one timeline into the master timeline, it brings an audio track with it. I did an unlink to delete and add. I need to figure out how to only bring one timeline into another and not carry that audio with it. Does that make sense?

  • RELEVANCY SCORE 3.07

    DB:3.07:Audio Annotation 8x



    Photoshop used to have an audio annotation tool, which I noticed is gone in CS4. Is there any way to add it back in to Photoshop CS4?

    DB:3.07:Audio Annotation 8x


    Photoshop used to have an audio annotation tool, which I noticed is gone in CS4. Is there any way to add it back in to Photoshop CS4?

  • RELEVANCY SCORE 3.06

    DB:3.06:Export One Frame From The Source - Pp Cs4 m8



    Hi

    I the older version of Premiere , it was possibel til export a frame to fileformat as jpg, bmp and more, but how can I do this in PP CS4 ??

    DB:3.06:Export One Frame From The Source - Pp Cs4 m8


    One little tip, with this process in CS4.1: In earlier versions, one had the option of also Importing that still into a Project. That function has been lost now. If you DO want your still into your Project, just make careful note of its location and name, and then Import it.

    I did not like the Import into Project being the default, but I also liked to have the option to do it, if needed. Maybe CS4.2, or CS5 will add the option back?

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.05

    DB:3.05:Importing Avi; No Audio az


    I'm getting no audio when importing AVIs from Camtasia (TechSmith + MPEG Layer 3)... any particular compression that's needed afterwards to get it to work in PP?

    DB:3.05:Importing Avi; No Audio az

    DV codec with uncompressed PCM audio is the best choice for Premiere. Problem is, I don't that that's an option with Camtasia. I myself prefer a hardware scaler solution.

  • RELEVANCY SCORE 3.05

    DB:3.05:Converting 4:3 To 16:9 In Pp Cs4 1a



    I"ve seen a tutorial on converting 4:3 content to 16:9 in FinalCut. Essentially, it's an enlarge / crop operation that makes clips the top/bottom of the 4:3 image area. I'd like to know what process to use in PPro CS4 to do this.

    Thanks

    Scott

    DB:3.05:Converting 4:3 To 16:9 In Pp Cs4 1a

    This is a very old thread.
    You can stretch anamorfic footage to widescreen by going into the Project Panel, right clik on the clip and select (modify) Interprete footage: set to widescreen
    For all clips in one go, lasso them first.
    Next time set up a new thread.

  • RELEVANCY SCORE 3.04

    DB:3.04:Render Audio With Video (Preference Setting) Or Do It In Encore For Dvd? 8p



    Should I check the [by default] unchecked "Render audio when rendering video" checkbox on the General page of the Preferences?

    Does Encore transcode the audio more quickly vs. choosing this option in PP CS4 Preferences? What about quality? Is that affected? Other factors?

    Thanks, everyone.

    DB:3.04:Render Audio With Video (Preference Setting) Or Do It In Encore For Dvd? 8p


    what I have is what I want (good name for a song,

    I think that name would worlk - at least for me.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.04

    DB:3.04:Workflow For Cc From Pp. - Ideas? sx


    I'm interested in CS4 workflow is to link project from PP - AE for keylight and colour correction.

    DB:3.04:Workflow For Cc From Pp. - Ideas? sx


    I would go with:

    "Edit in PP then CP or import into Ae losing dynamic link but retaining seperate clips for individual correction"

    for 2 reasons.

    1. if you have any fades between scenes with different CC, you need to have done the CC before the fade.

    2. normally you will want to apply the same CC to every occurance of a certain clip. If each clip is on its own layer, this will be much easier.

  • RELEVANCY SCORE 3.04

    DB:3.04:No Sound In Encore zf



    Hello All, I am producing MP4 files from my JVC GY-HM100 a gspot screen shot of these files can be seen in the PP forum (just search the same camera model) I produced three videos in PP CS4 and used the dynamic link to export to Encore then burn to DVD I have done exactly the same with my fourth video but there is no sound when I play the video in Encore.If I minimize Encore the video still has sound in PP but not in encore.Any ideas please?

    Kevin

    DB:3.04:No Sound In Encore zf


    Kevin,

    MP3's have caused all sorts of issues in Encore (and also in PrPro). I always convert these to PCM/WAV, or DD 5.1 SS AC3's prior to Import into Encore. This would be my first test. Do these converted files function properly?

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.03

    DB:3.03:Adding Filename To Clips mz



    how do I add the filename for the clips (800) in my video without doing this manually using 'Title'!

    PP CS4

    Thanks

  • RELEVANCY SCORE 3.00

    DB:3.00:Avi Video Play Problems da


    I 'm a past user of Premiere Pro 2 and moved to Windows 7. A few days ago, I downloaded Premiere Pro CS4 Ver 4.0.0 (Try/Buy) and put together a quick project to test some of the features I'll need. I'm able to iimport and read all photos and AVI files EXCEPT the AVI files captured with my Canon camera. I cannot view it using PP CS4. Only the Poster frame (first frame) is displayed in the source monitor and NO motion. Audio plays correctly. I play in the timeline and same thing happens, only first frame is displayed in the program monitor along with the audio. Transitions between clips OK. The same AVI files play correctly in PPro 2. I imported other AVI files from other sources and they all play correctly. I'm stumped and need some help.

    I read a previous possting on this forum 2/24/2010 by Jonespnh and others. Posted here is the output from G-Spot


    It appears that the Codec is installed. The project is NTSC.
    Hardware is HP Pavilion Desktop, intel Core i7-920 processor, 9GM mem, 640GB 7200 HD with a 1TB 7200 HD decated to PPro CS4, 1GB ATI Radeon HD 4650 graphic card. This system meets all PPro CS$ System Requirements.

    I'm not that familiar with CS4 settings and there's not much support from Adobe for Try/Buy users. Most of the general settings are same PPro 2 but can't go back to verify anything because my older XP system with PPro 2 is history.

    Any help would be appreciated.

    DB:3.00:Avi Video Play Problems da

    Thanks Hunt and Matt. This is beginning to make a whole lot of sense. I just wish some type of warning had been clearly stated on the Trial Version download. It would have saved me from wasting your time. But on pro side, I've picked up some valuable information from all of you. And thanks Hunt for the interesting discussions on codecs. Very valuable stuff to include in my files.

  • RELEVANCY SCORE 3.00

    DB:3.00:Export From Pp Cs4 To Mpeg2 Dvd For Encore Returns Pgc Internal Software Error ? xs



    Converting HD video to DVD with timecode for customer to create EDL.

    Editing .m2t HD files, captured on a Focus Enhancements FS4 Hard Drive attached via firewire to camera at time of recording

    Audio not synched, so unlinked and corrected in time, and relinked.

    To make Encore process and burn faster:

    Timelines exported from PP CS4 via Export Media Format MPEG2-DVD.

    Multiplexed for DVD, MPEG audio format, Widescreen pixel apect ratio.

    Sends to Adobe Media Encoder. Takes a few hours.

    Open Encore:

    Import MPEG2 files - import takes a few minutes.

    Link video files to existing menu for continuity (older video files and timelines are deleted).

    Weird: timelines have excessively long audio tracks, approx 10 times the length of the video track (should be equal).

    Check project returns no errors.

    Build project fails, returning:

    PGC "[filename]" has an error at 00;00;01;05 internal software error:%0, line [filename] - PGCInfo:name=[filename],ref=AApgc,time=00:00:01:05.

    My workaround is to export DV NTSC .avi video files from PP, not ideal as it creates excessively large files.

    Those .avi files seem to import and burn from Encore correctly.

    Alos strange: my original project became defective/corrupted, hung up on "loading files" when trying to open. So I opened the last autosave file (which happened to be from a week ago - not sure why so long between autosaves). Rather than re-edit the changes since then, I reimported the MPEG2 files back into Premeire in order to export/process the .avi files.

    DB:3.00:Export From Pp Cs4 To Mpeg2 Dvd For Encore Returns Pgc Internal Software Error ? xs


    While your error is seen in PrPro, there are several threads on PGC errors in Encore. Some are in the EncoreEncore sub-forum, and more in the EncoreError Messages - Windows sub-forum. You might want to read over those, as there is a lot of material, and useful input from Jeff Bellune.

    I also agree that Encore would rather use elemental streams (non-muxed) Assets.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.00

    DB:3.00:Recovering Videos Audio (Cs4) aj


    Consider this: I have sent (render/replace) the sound portion of a video clip to Soundbooth. Sound is modified (great program) and returned to PP. PP is exited. I inadvertantly delete the sound file placed on video HD. I then re-enter PP and it askes for the location of the missing sound file. Can't find it (of course) and so I proceed without finding it. PP opens and the sound portion of the video is now missing, as expected.

    So, I would like to find the original video clip to recover the original sound related to the clip. But opening the original clip in the clip viewer may now have different in/out points.

    Is there some way of opening the timeline clip (sans sound) to recapture the in/out points to use on the original clip?

    Not that it cannot be redone but it is mostly a technical issue/curiousity.

    CS4 is far deeper than I had expected (coming from another editor). Just a couple of things I miss but a whole lot that is really great.

    EvanF

    DB:3.00:Recovering Videos Audio (Cs4) aj


    Yes, that's the way it looks. I have had to go back to the original.

  • RELEVANCY SCORE 3.00

    DB:3.00:How To Reduce Still Jpeg Duration To Less Than One Second p7



    I created an AE CS4 project and rendered it in jpeg sequence. I then imported 1798 images into Premiere Pro CS4, but the duration far exceeds the audio duration now. PP appears to not be able to reduce a still image to less than one second. How can I get the still images to match the audio track duration?

    Thx.

  • RELEVANCY SCORE 2.99

    DB:2.99:No Audio On Imported Mpg In Pp Cs3 In Vista sz



    Hello,

    I imported an mpg into Premiere Pro CS3 on Vista Home Premium, and the clip has no sound.

    This mpg plays fine video audio in Windows Media Player.

    All other imported clips have sound in PP as expected.

    I originally tried to import this file as an avi. The avi also played perfectly in WMP. In PP, the sync was jumpy distorted.

    So I converted the avi into an mpg using "any video converter 2.7.9" (mpeg2 video codec, output: DVD video NTSC Movie *mpg)

    This video looks better, but no sound.

    I'm an advanced PC user, but novice with PP video editing in general.

    Thanks for any suggestions.

    DB:2.99:No Audio On Imported Mpg In Pp Cs3 In Vista sz

    If the mpg contains ac3 audio (which is probably does) copy ad2ac3dec.dll from the root of Encore and paste this in the root of Premiere.
    Reimport the mpg files.

  • RELEVANCY SCORE 2.99

    DB:2.99:Bussiness Rules 7p


    pHi All,/pp/ppI opened a Web Form/pp/ppbAdmin - Manage Form - Edit - BusinessRules/b./pp/ppI am getting all calc scripts in Business Rules (left sidelist), no Business Rules./pp/ppHow to view them to select?/pp/ppthanks,/pp/ppBalu./pp/pp/p

    DB:2.99:Bussiness Rules 7p

    pHi All,/pp/ppI opened a Web Form/pp/ppbAdmin - Manage Form - Edit - BusinessRules/b./pp/ppI am getting all calc scripts in Business Rules (left sidelist), no Business Rules./pp/ppHow to view them to select?/pp/ppthanks,/pp/ppBalu./pp/pp/p

  • RELEVANCY SCORE 2.97

    DB:2.97:Ae Menu Items Defect c9


    My AE Help menu including Scripting Help, Expressions Reference, Animation Presets, Keyboard Shortcuts have no functionality. It installed this way on Vista/PC from Adobe disk. (The Help menus in the rest of the suite (PS, AI, FL, PP) are okay if I remember correctly. The help menu problem is in After Effects CS4.) I am working in AE more and I would like the help features.Can anyone tell me how to fix this?

    DB:2.97:Ae Menu Items Defect c9


    The link that you gave me is for the online Community Help application protocol. I see nothing there that would refer to After Effects software. My Help Menu issue concerns missing or misplaced files in the After Effects CS4 Help Menu.

    Date: Thu, 19 May 2011 13:01:43 -0600

    From: forums@adobe.com

    To: corpora_striata@hotmail.com

    Subject: AE menu items defect

    The people who can help you with failures with the Help software are not here on the After Effects forum. They're on this forum for the Help software itself:

    http://forums.adobe.com/community/creativesuites/communityhelp?view=discussions

  • RELEVANCY SCORE 2.97

    DB:2.97:Lossless Hdv Export In Cs4. What No .M2t Output?? ff


    I just upgraded from Premiere Pro 2.0 to CS4. I shoot a lot of video on Sony HDV tape-based cams, and have a lot of stock archives in .mt2 format. In CS4, I can import .m2t, however, the Media encoder in CS4 doesn't let you export HDV in .m2t. This is a feature lost between PP Pro 2.0 and CS4. Anyone know of a workaround to get lossless export of HDV video from CS4?

    Thank you,
    Brian

    DB:2.97:Lossless Hdv Export In Cs4. What No .M2t Output?? ff

    the capture process converts the complete image and the partial images (i.e., "group of pictures, or GOP") back into uncompressed frames

    It actually doesn't. The data is read from tape exactly as is, compression and all. The 'decompression' you're talking about happens on the fly as you edit, which is why editing HDV requires a beefier system than DV, and why AVCHD (with much higher compression then HDV) is a bear to edit even on a top line rig.

    Other editors, such as Avid and Final Cut, may use intermediary codecs and do their decompression during capture, but Premiere edits natively. You work with the original unaltered media.

    It should also be mentioned that it is possible to export out without recompression, or with compressing only the new GOPs that have changed. This 'feature' has in the past come from a plug-in, and was not a part of Premiere's native capabilities. But it can be done.

  • RELEVANCY SCORE 2.96

    DB:2.96:Optimzing Cs4 Ame - Mac 1c



    Currently using a MBP 5,1 mid 2009 2.66 core 2 duo, 4 gb ddr3 memory. 7200rpm os hdd. 7200rpm external esata scratch drive with plenty of headroom. CS4 suite on internal os drive. AME 4.2.0.0006

    Currently, sequence is H.264 1920 x 1080 1080 60p AVCHD .mts 27mbs 48khz audio. Sequence is manually set within PP. I am experimenting with exporting to AME a 10 second clip with no effects, transitions, etc. Just the raw clip. AME CS4 preset is the h.264 appletv preset which basically is scaling to 720p, 29.97fps, 7mb/s. AME is encoding the finished product in a manner as expected however the encode duration is sloooow.

    I am finding that this raw encode takes approximately 3 minutes for a 10 sec clip.

    Are there any settings in the MBP preferences or within CS4 that i can make to optimize the encode time?

    I realize the original AVCHD file is a highly compressed codec and is very "system intensive" and I am working with four year old technology and software.

    By the way, the sequence is exported via the file menu in PP and not "dragged and dropped" into AME. Have not tried the latter.

    I am i experiencing a typical encode time frame given the above parameters? Thanks in advance.

    DB:2.96:Optimzing Cs4 Ame - Mac 1c


    Currently using a MBP 5,1 mid 2009 2.66 core 2 duo, 4 gb ddr3 memory. 7200rpm os hdd. 7200rpm external esata scratch drive with plenty of headroom. CS4 suite on internal os drive. AME 4.2.0.0006

    Currently, sequence is H.264 1920 x 1080 1080 60p AVCHD .mts 27mbs 48khz audio. Sequence is manually set within PP. I am experimenting with exporting to AME a 10 second clip with no effects, transitions, etc. Just the raw clip. AME CS4 preset is the h.264 appletv preset which basically is scaling to 720p, 29.97fps, 7mb/s. AME is encoding the finished product in a manner as expected however the encode duration is sloooow.

    I am finding that this raw encode takes approximately 3 minutes for a 10 sec clip.

    Are there any settings in the MBP preferences or within CS4 that i can make to optimize the encode time?

    I realize the original AVCHD file is a highly compressed codec and is very "system intensive" and I am working with four year old technology and software.

    By the way, the sequence is exported via the file menu in PP and not "dragged and dropped" into AME. Have not tried the latter.

    I am i experiencing a typical encode time frame given the above parameters? Thanks in advance.

  • RELEVANCY SCORE 2.95

    DB:2.95:How Can I Get Pp Cs4 To Automatically Locate Missing Assets? j8



    Hello. I'm using CS4 on a Hewlett-Packard PC computer running a 64-bit Windows 7 operating system.

    My computer recently crashed necessitating a visit to my friendly, local repair shop. When I got it back, I had to reload PP which I did but when I tried to start a project I was working on, I found that the folder where the assets were located was renamed, generating a "where is...?" dialogue box when I tried to open the project. I changed the folder's name back to what it was but PP was still unable to locate the assets. I tried locating all asked-for assets but there were just too many of them. What I need is for PP to locate them all automatically for me, once I point to the first one it asks for. I checked out a tutorial on this very topic and indeed there is a "locate others automatically" check box in the dialogue window but its for a Mac. On my PC there is no such check box. Is there some way I can get PP to locate the missing files automatically on my PC? Thanks for any help you can offer!

    DB:2.95:How Can I Get Pp Cs4 To Automatically Locate Missing Assets? j8


    Hello. I'm using CS4 on a Hewlett-Packard PC computer running a 64-bit Windows 7 operating system.

    My computer recently crashed necessitating a visit to my friendly, local repair shop. When I got it back, I had to reload PP which I did but when I tried to start a project I was working on, I found that the folder where the assets were located was renamed, generating a "where is...?" dialogue box when I tried to open the project. I changed the folder's name back to what it was but PP was still unable to locate the assets. I tried locating all asked-for assets but there were just too many of them. What I need is for PP to locate them all automatically for me, once I point to the first one it asks for. I checked out a tutorial on this very topic and indeed there is a "locate others automatically" check box in the dialogue window but its for a Mac. On my PC there is no such check box. Is there some way I can get PP to locate the missing files automatically on my PC? Thanks for any help you can offer!

  • RELEVANCY SCORE 2.95

    DB:2.95:I Have No Audio j3


    I am running Premier CS6 on an iMac with an intel i7 using Mountain Lion operating system.Before I bring in the clip I can play it in QuickTime before importing it into PP. Once it is in PP there is no audio in source or timeline. It has worked before and now no clips will give me sound even thou the audio mixer shows the audio is there on the tract.Thanks for your help...I have already gone through the Bars and Tone drill and still no sound.

    DB:2.95:I Have No Audio j3

    Go to edit preferences, and the Playback tab.There you can select between the audio going to your MXO2 attached monitor or your computer sound card. My guess is that it is directed to a monitor which is not connected to the MXO2 - change the setting to your sound card.

  • RELEVANCY SCORE 2.94

    DB:2.94:Moving A Big Pp Cs4 Project To Cs3 ...How To ...? sd


    I cannot keep working on my project with PP CS4 I keep having very ennoying problems : un-openable projects. like once a week or so, a project and all the auto saved version of it - become unopenable... the progress bar stalls...

    I thought I solved my problems when I upgraded to vista ultimate 64 and did a very simple setup (CS4 and a few animation softwares... not much more...).

    I spent too much money and way too much time and haven't understand WHY some of my project won't open (it olny happens 5% to 10 time

    I lost A LOT of time trying all sorts of things, all the operating systems (XP home, XP pro, XP 64, VISTA64 and WINDOWS 7 build 7600) ....

    I have a DELL precision 690 workstation 2 dual core/3ghz - 8 gig ram - a quadro 3450 video card ... almost nothing installed but the production premium CS4 suite ...

    We still will be working for at least 3 months on this project...

    I'm fed up with all the lost time and I have ABSOLUTELY no clue why we have problems, despite all the troubleshooting and tiem spent on the forums...

    So I lost faith in PREMIERE CS4.

    I tried hard enough. I need a faithfull editing software.

    I have to decide between CS3 or FINAL CUT.

    We are working on a half hour animated film.

    Our latest PP timeline includes close to 2000 medias (still/QT and audio files).

    Has anyone done this operation ? ... going from PP CS4 to CS3 ?

    I am ready to spend a full day to do copy/paste - export timelines one by one ....

    I am not ready to redo the whole editing, as it may take a long while to place all the media

    at the right place.

    Any clue or trick or plug in or whatever that could help us do this move would be greatly appreciated!

    also I know I am on an ADOBE forum, but I am also interested in the pros and cons of cs3 vs FCP...

    I would prefer using CS3 as we use photoshp and AE a lot in this project and like to stay in the ADOBE world... but if there's an easy way to go from PP CS4 to FCP we may consider it...

    ... another small hope is the 4.2 upgrade...?

    thanks for any help!!

    luc

  • RELEVANCY SCORE 2.94

    DB:2.94:Play Audio Files In Bridge Cs6 z1



    Hi,

    I used to be able to play audio files created with my Mk4 right in the preview window in CS4 which was easy for renaming files after their description was recorded when taking the shot.

    Does anyone know how I can do this in CS 6 - there are no play/pause controls under the preview like there was in CS4.

    Thanks Heaps for any help.

    DB:2.94:Play Audio Files In Bridge Cs6 z1


    Hi ,

    yes , MK4 and .wav files

    I have Mac 10.7.5 Bridge CS6

    I have selected "Play audio files automaticly when selected" in the preferences but it doesnt do it.

    In previous versions of bridge you could get a play and pause buttons below the .wav icon view in the preview

    but this doesnt happen.

    It is really inconveinent as it defeats the purpose of having the .wav file and the I have to go back to Bridge CS4 to play the files.

    Thanks

  • RELEVANCY SCORE 2.94

    DB:2.94:No Music Plays In Pp 2010 I Make But Plays On Other Computers I Send Presentations To. kc


    Greetings!
    Made many PowerPoint presentations with PP 2003 with .wav music files embedded. Files were less than 2 megs. They played fine on my XP computer and on those I emailed them to. Got a new Dell Windows 7 computer in May 2010. Loaded Office 2003 on computer
    and all of a sudden, none of the PP presentations had any sound. Went through all the troubleshooting guides to no avail. Sound plays ok on all other media programs except PP.
    Purchased Office Home and Student 2010 to solve the problem. Installed it and opened previously made PP programs. Still no sound. Sent programs to friends via email.Sound plays ok on their computers. Uninstalled Office 2010 and downloaded PP Viewer
    from Microsoft. Opened PP programs. Still no sound. Checked audio volume settings and it is set on 'medium'.
    Pulling my hair out. Would be most grateful if anyone can offer a solution!
    Molto grazie!
    Bald Eagle

    DB:2.94:No Music Plays In Pp 2010 I Make But Plays On Other Computers I Send Presentations To. kc

    It only appears if the sound is playing (or playing muted). If it doesnt then I guess you have other problems.

    Microsoft® MVP PowerPoint® since 2007.
    Web Page:
    PowerPoint Alchemy Hints and Tips

  • RELEVANCY SCORE 2.94

    DB:2.94:Problem With Audio From Gopro Hero 2 Footage sd



    have some gopro footage im trying to edit. playing the gopro raw files in media player the sound works perfectly fine. though whether i use pp cc or pp cc 2014 there is no audio just hiss. ive tried converting the files to cineform avi's and same thing, audio plays fine in media player but not in pp.

    i use to edit footage from this cam fine. i cant remember last time i shot with it though, its been a year or 2. is there something simple im missing so that the audio from the footage will play in pp? thanks

    DB:2.94:Problem With Audio From Gopro Hero 2 Footage sd


    Wow, good for you. That is real weird how it is and good that you found a way.

  • RELEVANCY SCORE 2.93

    DB:2.93:Ram Preview Anomolies 17



    I have a 36 second clip that has been imported from PP CS4. The file has 1106 frames but whn RAM previewing it, from the beginning of the comp, only about 674 frames ram preview then it stops, the CTI returns to the beginning. If I click the period button on the key pad to hear audio, the video is frozen and there is no audio but the CTI progresses throught the comp normally.

    Can anyone tell me why ram preview is not completeing? The comp is set to the full duration of the clip and why there is no audio with the video frozen at the beginning frame of the clip with attempting to play the clip after ram preview? I am have the latest version of AE CS4 per the notice in the board.

    Please help!

    DB:2.93:Ram Preview Anomolies 17


    Thanks for this input, I wasn't aware of that explanation in the manual.

  • RELEVANCY SCORE 2.93

    DB:2.93:No Audio In The Timeline And No Sound As Well Using Cs4 9j


    We have installed CS4 Premiere Pro. When we imported a video clip, there was an error message "audio conforming error". the image part showed up but there was nothing (no sound, no wave length on the timeline). We can work on this video file on CS3 version on the other computer. Please help.
    Lily

    DB:2.93:No Audio In The Timeline And No Sound As Well Using Cs4 9j


    Linny,

    Do you get Audio output from any other source files in PrPro? If you have not tried other source files, just grab a .WAV from Windows and give it a try.

    If you get no Audio from that, go to Edit?PreferencesAudio Hardware and tell us your settings, especially the ASIO - a screen cap of that dialog box would be helpful. Could be a setting, or possibly an ASIO problem. For those, many have had great success by installing ASIO4All, and using it for both Input and Output.

    Good luck,

    Hunt

  • RELEVANCY SCORE 2.93

    DB:2.93:Cs4 Bridge Web Gallery 3x



    Is there any galleries that you can add audio??? In CS3 you could add audio but I do not see how to do in CS4.

    DB:2.93:Cs4 Bridge Web Gallery 3x


    Thanks! I am still looking to perfect my gallery.. have yet to get it just

    right!! I'm too picky I guess, loL

    My css script comes out ok, but having issues with the pic onhover landing

    in the right spot..grrrr

    Pam

    In a message dated 9/20/2009 1:00:44 A.M. Eastern Daylight Time,

    forums@adobe.com writes:

    I realize this is an old thread, but since it wasn't answered and does

    show up in Google searches, here it is for those that come across this with

    the same question. CS4 can be configured to use the web photo gallery

    templates that were included with previous versions of Photoshop. These templates

    can be customized with audio, paypal carts, additional info, etc. in a

    text editing program like NotePad (PC) or TextEdit (Mac). To configure CS4,

    visit http://generatex.com/cs4.html for detailed instructions.

  • RELEVANCY SCORE 2.93

    DB:2.93:No Audio In Project 9j



    I did a couple of projects in PP CS6 today. they had clips from either a D300s or D4 Nikon camera. They had audio, and no problems.

    Then I started another project, all with clips from the D4, and there is no audio. All the clips have very large waves in the audio track.

    The preferences had the audio hardware as PP WMD sound. I thought it should be my Presonus external sound module, that plays all my audio from the computer, so I selected that, but it made no difference.

    The volumes on the clips and on the master not turned down.

    If I play one of the clips it Windows media, it has loud sound, mainly wind noise.

    If I take one of the clips and import it into one of the projects I did earlier today, it has sound, but not in its own project. I can't figure out why.

    DB:2.93:No Audio In Project 9j


    Now Im thinking maybe the problem is due to overheating of the camera (Panasonic GH4), because it was the last clip I recorded that long morning. But still, Windows media player plays it right.

  • RELEVANCY SCORE 2.92

    DB:2.92:Warm Voice Over In Pp Cs4 Possible? mk



    I am wondering if it is possible to record a deep, warm voice over in PP CS4? If so, can someone recommend the audio settings? Is this only possible using Soundbooth CS4 (prefer dynamic link so I can time the voice over with the video). If so, can anyone recommend the settings in SB?

    Thanks.

    DB:2.92:Warm Voice Over In Pp Cs4 Possible? mk


    Paul,

    Most welcome and glad that you are happy with the Audio.

    Good luck,

    Hunt

  • RELEVANCY SCORE 2.91

    DB:2.91:Dvd Audio Not Synching In Encore Cs4 zj



    Problem: I'm creating NTSC dvd in Encore CS4 and audio starts out fine but begins "skipping" around after about 2 minutes. Project looks and sounds fine in PPCS4. The project is 3hrs and 40 min. long. I'm using Verbatim DVD-R's and have been using them for over 2 yrs. - Windows platform. Write speed is 18x. There are no transitions or edits at the point at where audio starts "skipping" or "jumping" and the video shows a man speaking in front of an audience and continues showing him, then all of a sudden the audio skips.

    Any help would be appreciated.

    DB:2.91:Dvd Audio Not Synching In Encore Cs4 zj


    The 2-DVD set is probably a good idea. I have been faced with similar. I have one client whose player will NOT play any burned DL discs. For him, I need to break things down to multiple disc sets.

    Even with limited motion Assets, I try to limit DVD-5's to 120 mins. of Duration. If I go much over that (just a rule of thumb, based on my tests of quality), I'm reaching for the DVD-9's, or looking to find logical disc breaks in PrPro.

    Good luck,

    Hunt

  • RELEVANCY SCORE 2.91

    DB:2.91:Need Help- Capturing A Dvcam Tape With A Sony Dsr 45p m9



    I tried to capture a DVcam Tape in PP CS4, with the Sony DSR 45P, however when pressing the record button, PP only captures around 15seconds and when trying to batch capture the files they are captured in the wrong format (text files), so they don't even play.

  • RELEVANCY SCORE 2.91

    DB:2.91:Sdi Audio In Cc xj



    Audio is not embedded in my SDI output from timeline in PP CC version. Audio embedded fine if I use my CS6 version. Have matched audio hardeware settings as closely as possible.

    DB:2.91:Sdi Audio In Cc xj


    All great ideas Jim: Have updated to BMDs latest updates for the hardware (27 Sept 2013) have tried using a BMD Seq Preset but still no cigar. Need to get this job out will have to explore other options.

  • RELEVANCY SCORE 2.90

    DB:2.90:No Audio In Pp Cs4 p3



    Hi, need some help. I imported video and audio from DVD using Studio 12 Ultimate, the resulting file was an mpg file. It plays perfectly in MS Media Player but when I import it into Premiere Pro CS4, it converts the video and conforms the audio (I see the status bar in the bottom right), but when it finishes, the audio doesn't play (no audio). The file description in the project states it's 48,000 hz. compressed stereo, but it won't play. I searched the Adobe support knowledge base and everything seems to say CS4 plays mpg audio, but I can't figure it out. Any help would be appreciated...

    J.D.

    DB:2.90:No Audio In Pp Cs4 p3

    That doesn't answer why MS' free Media Player can find the proper codecs and Adobe's expensive CS4.1 can't,

    There is a great deal of difference between playing a file and editing it.

    My guess would be that the muxing of this AV file is the issue with CS4.1 not being able to rip the Audio.

    Glad that Colin's addendum did it for you, and sorry that I missed adding that - I know better.

    Good luck,

    Hunt

  • RELEVANCY SCORE 2.90

    DB:2.90:No Video Imported But Audio Is Imported 1m


    I have an avi file that plays great in VLC player and when I import to PP all i get is the audio. One time I tried it and the audio imported but then in the bottom right it said conforming AVI, but no video appeared later. It never tried to conform it again so how do I get the video?

    DB:2.90:No Video Imported But Audio Is Imported 1m

    Andrew,

    This problem most often occurs when people try and edit files that were not really meant for editing. Premiere works best with media you shoot yourself on a DV camera. With any other kind of video, you take a chance that it just won't work.

    So, where did you get the file you're trying to edit?

  • RELEVANCY SCORE 2.90

    DB:2.90:How To Synchronize Audio When Importing Powerpoint fa



    Hi All,

    I have a very simple problem, that everyone who tried importing animated PowerPoint presentations should be facing also. In brief:

    1) I have an animated PP presentation that I need to import to Captivate and add audio

    2) Captivate imports the entire animated slide from PP with no track breakdown on separate animation objects

    3) If I add audio in captivate, there is no way to synchronize that animation with audio

    4) I tried also Adobe Presenter 7, but it allows adding audio in PP only for its own swf format, i.e. no use for Captivate import

    What is the best way of synchronizing PP audio?

    It looks to me as the simplest way woud be to forget PP and recreate presentations in Captivate by importing simple graphical objects.

    Any better ideas?

    Thanks,

    Andy

    DB:2.90:How To Synchronize Audio When Importing Powerpoint fa


    Hi Andy

    You might find that acceptable results are obtained by configuring the PP to play in a window. Then use Captivate to surround the area of the PP and record it as it plays. This would allow you to control the timing more easily.

    Cheers... Rick

    Helpful and Handy Links

    Captivate Wish Form/Bug Reporting Form

    Adobe Certified Captivate Training

    SorcerStone Blog

    Captivate eBooks

  • RELEVANCY SCORE 2.89

    DB:2.89:Cs4 Ac3 Audio Problems zf



    After editing AVCHD material with Premiere CS4 and export it as a Bluray-MPEG file (*.m2t) in Dolby-Stereo I can playback the file in extern video players as PowerDVD or Arcsoft Mediatheater 3 without any problems. But if import it in Encore CS4 I have no sound anymore. Even if I re-import the file into Premiere CS4 for changing audio codec (i.e pcm stereo) there is no sound playback in Premiere either.

    Can anybody help? Do I have to reinstall CS4 because of loosing any codecs?

    My system:

    Intel CPU Core2 Quad Q9550

    8GB RAM 1066Mhz

    Asus P5Q Pro

    Onboard Realtek HD Audio

    Raid10 with 4 Samsung 1TB

    Vista64 Home Premium

    Thanks for help

    Phil

    DB:2.89:Cs4 Ac3 Audio Problems zf

    Because I deleted the original AVCHD files

    Lesson learned there, huh?

    Just NEVER do something like that. ALWAYS keep original media on a shelf somewhere - via hard drive, data disk, video tape, whatever - along with the project file and everything else you'll need to rebuild if you ever need to.

  • RELEVANCY SCORE 2.89

    DB:2.89:Pp Cs4 - No Mpeg Export? 77


    I have Windows XP SP3, 2 gigs of RAM, 3.5Ghz processor,
    NVIDIA 8800GTS video.

    I don't have any issues regarding error messages, etc.

    First, I downloaded Adobe Premiere Pro CS4 trial.
    I did a full install with every option selected (installed Bridge, OnLocation, Encore, Device Central, Media Encoder, etc.) and all sub-options.

    I can open (import, etc.) movies of various formats (.avi, .flv, .wmv) which will all play fine in the Previewer windows and will accept Effects applied, etc.

    However, there is no menu choice to export to MPEG.

    In the PP CS4 Help it says simply to choose FileExportMedia... and then select one of the various MPEG formats (1, 2, etc.)
    I have no MPEG choices.

    Of course "Save As" will only give you the *.prproj" choice.

    Sorry for the long list, but here are my choices for "Export":

    Audio Interchange File Format
    Microsoft AVI
    Windows Bitmap
    Animated GIF
    GIF
    P2 Movie
    QuickTime
    Targa
    TIFF
    Uncompressed Microsoft AVI
    Windows Waveform
    Audio Only
    FLV/F4V
    H.264
    H.264 Blu-ray
    Windows Media

    Any help would definitely be appreciated. Thanks in advance.

    Xyso

    .

    DB:2.89:Pp Cs4 - No Mpeg Export? 77

    Aha, that explains everything. Thank you Ann.
    Unfortunately for me, I downloaded the trial SPECIFICALLY to try exporting video to MPEG 1 in order to burn Video CDs (VCD) heh heh

    Thank you so much for your help.

    Hugh

  • RELEVANCY SCORE 2.89

    DB:2.89:Dvd Based Menu Sequences sa



    Using PP CS4, Encore CS4

    1- I want to make a menu based DVD.

    2- I want to break my video up by day. So, in my DVD the person can select a 'day' from the menu.

    Q- When in PP CS4, do I need to use sequences for linking to encore?

    Any hints would be great!

    DB:2.89:Dvd Based Menu Sequences sa


    For several reasons, I do not use ADL (Adobe Dynamic Link), so am not the best person to answer. However, if I recall Jeff Bellune's directions, when on uses ADL from Encore, then one can choose all of the Sequences in a PrPro, that they wish to link. IIRC, if going from PrPro to En, there might be limitations, though perhaps there is a workaround there.

    I would ask this question in the Encore Forum, as there are several regulars there, who do not hang out here. You will likely get your answer most quickly.

    Good luck,

    Hunt

  • RELEVANCY SCORE 2.88

    DB:2.88:O.O.P.S. (Out-Of-Phase-Stereo) In Soundbooth Cs4? p3



    Is it possible to turn regular / standard audio files into O.O.P.S. versions (.wav, etc.) with SoundBooth CS4? No pressing need, but O.O.P.S. versions of Beatles songs are often interesting.

    I've checked the manual, Lynda.com, general Googling, with no success.

    Thanks.

    Bill

    DB:2.88:O.O.P.S. (Out-Of-Phase-Stereo) In Soundbooth Cs4? p3


    Thanks for the info. I downloaded the app, then found directions at http://www.stevehoffman.tv/forums/archive/index.php/t-168346.html .

    Now all I need is the time to fiddle with it.

    Bill

  • RELEVANCY SCORE 2.87

    DB:2.87:Pre-Rendering s1


    I work almost exclusively in multicam. I've noticed that now (in CS4) if I make any changes to the original timeline (the one my multicam timeline is reading from) PP has to re-render it's pre-render (if you see what I mean!), whereas in CS3 that was no longer the case. Is that as it should be?

    DB:2.87:Pre-Rendering s1

    I work almost exclusively in multicam. I've noticed that now (in CS4) if I make any changes to the original timeline (the one my multicam timeline is reading from) PP has to re-render it's pre-render (if you see what I mean!), whereas in CS3 that was no longer the case. Is that as it should be?

  • RELEVANCY SCORE 2.86

    DB:2.86:Pp Cs4 Won't Capture Hdv Or Import M2t Files a1


    MacbookPro, OSX 10.6.4I haven't done a video project for a couple of months, and everything was working then.But now, I can't import HDV footage captured by OnLocation (.m2t) ("format not supported"), or capture it directly from my video camera (Sony HVR-A1U). There are also no sequence presets for HDV video.When I try capturing from the camera, my MacbookPro's webcam shows in the previewer, although the controls in the capture window do control the camera (play, stop, rewind etc.). If I go into the capture Settings, no firewire sources are shown.I can capture HDV from the camera using iMovie (to Quicktime format). In some respects, that is better, since it does HDV scene detection (unlike PP CS4), saving me a little work. But iMovie won't import m2t either so I'll have to find some other way to convert if for use by PP.I tried reinstalling PP from disks but to no effect. Before I try full unininstall and reinstall , I thought I'd check here to see if anyone has ideas about what is going on with PP.

    DB:2.86:Pp Cs4 Won't Capture Hdv Or Import M2t Files a1

    I had exactly the same problem on PC running XP SP3 and I found that a simple re-installation over the original installation followed by a downloading the updates fixed the problem in about half an hour.If you're reading this thread and are getting depressed - try just reinstalling over the top and updating at least once - it's worth a try, dont'; you think?

  • RELEVANCY SCORE 2.86

    DB:2.86:Replace A Clip With An Image Sequence Cs4 m1



    I edited a lot of footage in PP CS4 that had a green screen behind it. i used proxy .mov files with the plan to replace them later.

    I have created an Image Sequence via After Effects, which I imported to PP.

    Now need to replace the .mov I used as a proxy.

    The snag I am facing: I can't figure out how to replace it.

    I've scowered the web for an answer.

    If I replace it in the time line, it replaces every edited part with the image sequence starting from 0:00

    So it kills all those edit points.

    If there is no way to do it, does anyone have any advice how to export from After Effects so the transparency is still there, and I would be able to replace a proxy .mov in PP?

    Thanks!!

    DB:2.86:Replace A Clip With An Image Sequence Cs4 m1


    Export (Render) from AEFX with an alpha channel.

    Its an option in your Render Settings.

  • RELEVANCY SCORE 2.86

    DB:2.86:Export Audio - Cs4. 9j


    I am using Windows XP and PP CS4.
    I am trying to export the audio part of my timeline.
    I click File/Export Media and fill out the Export Settings (mp3, stereo, check Export Audio, etc.) then I set the output file destination to my HD, and click OK. I get a quick message Exporting Data and then the Media Encoder opens up. The screen does not have anything linked into it from PP and is just as if I opened the Encoder myself. The file did not export to my prescribed HD destination. Need help please.

    Thanks,

    DB:2.86:Export Audio - Cs4. 9j

    If not then please do provide
    these details to help us help you.

    Cheers
    Eddie

    PremiereProPedia (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you

    Forum FAQ

  • RELEVANCY SCORE 2.85

    DB:2.85:Fcp Files In Pp ...Overall Acceptance k7


    Did a fair amout of search, but I'm still not clear on this issue...Just upgraded to CS4 in large part because I need to bridge a huge gap I have in finding freelance editing gigs with all that raw video out there that has been captured using FCP.I just watched this and the import of FCP projects and SD .movs looks good to go... http://odeo.com/episodes/23753925-Import-Final-Cut-Pro-projects-into-Adobe-Premiere-CS4...but, I'm reading that FCP captured in HD is a no go in Premiere.Questions-1. Which video files will Premiere CS4 accept from an FCP captured project (I apologize for the lack of specificity) The "will"s and the "won't"s 2. Of the types that do import, do any of them slow PP down to an unusable crawl? ...like .movs did to me in PP 2.03. If FCP captured HD video will not import/work in CS4, is there third party software that can encode the FCP files into something that will work in PP? Before I moved up to CS4 I had to edit P2/MXF video and purchased a Raylight product that converted the files to .avi ...anything out there that will convert FCP HD for the purposes of PP?I'd love to go trolling for gigs, but I need to know how good the CS4 handshake is with FCPThanks!

    DB:2.85:Fcp Files In Pp ...Overall Acceptance k7

    Chris,Apparently there has been an issue with FCP Captured files into PrPro. Don't do that, so I have no first-hand experience.IIRC, the soon to be released 4.1.0 update will have enhanced X-program support between FCP and PrPro. To what extent? Not sure that any of us knows yet, but maybe a report from NAB will shed more light on the issue.Good luck,Hunt

  • RELEVANCY SCORE 2.85

    DB:2.85:Premiere Pro Cs4 Transition Handle Issues az


    Grettings,

    I am continuing my transition to PP CS4 from another NLE and am slowly translating my techniques.

    I am still struggling on some transitions. I understand that for certain transitions "handles" are required. For example the basic default cross dissolve does not seem to do anything without them. However I have sometimes created additional audio track sync issues creating video handles on the main track in in order to create a transition. I have sync checked on all tracks.

    However some transitions seem to work fine without handles...I just razor the video and insert the transition (correct technique). Works with no handles and audio sync fine. Certainly easier and less concerned I am going to mess up my sync. I know how to do slip edits etc....but can't seem to marry this knowledge to this basic question.

    I am sure I am doing something basic wrong!

    I just would like to use my transition of choice without fear of messing up a multi-audio track and multi-video segment project and understand when I need to worry about video or audio handles. And when I can just razor and insert a transition.

    Thanks for any help!

    BJBBJB1

    DB:2.85:Premiere Pro Cs4 Transition Handle Issues az


    Bill,

    Alas, since the cross dissolve did not work at all, I did not save it and used a "dip to black" which seems to work regardless of handles. I have in fact seen the behaviour you note in 1) 2) so am familiar with that and then you also get those lines on the transition.

    I will certainly take a screen shot if it happens again....

    Best description would be, in the progam monitor it just played back just as if there were two clips with no transition between them. Just a fast cut. Although a cross dissolve transition was certainly visible between the two clips before I deleted it. Strange.

    Thanks,

    BJBBJB1

  • RELEVANCY SCORE 2.85

    DB:2.85:V4.2, 720p Mjpg Video Unsuppoted Again cf



    Just updated pp to 4.2 and tried editing some 720p mjpg video clips. PP had no problem importing the clips, but stopped responding after scrubbing in the timeline. I tried exporting the clips to AME and it also stopped responding as soon as I clicked the start queue button.

    It seems the problem is the same as CS4 just came out. I had raised this problem in this forum and the problem was fixed since updated to 4.1. But then the bug comes back again in 4.2.

    DB:2.85:V4.2, 720p Mjpg Video Unsuppoted Again cf


    Thanks fuaho and Hunt for your advice.

    I am sorry that trashing the preferences didn't help.

    I don't think the problem has any connection with codecs as the mjpg files can be played with Windows Media Player and Quicktime Player without any problem.

    I had reinstalled pp and updated again to 4.2 but the problem still exists.

    This problem happened in v4.0 and had been addressed in v4.1 but now it recurs in v4.2.

    Regards

  • RELEVANCY SCORE 2.85

    DB:2.85:Problem Opening Pp Cs3 Project Files In Cs4 x7


    I have a few final things to take care of in Premiere CS4 before finally doing the CS5 upgrade.

    DB:2.85:Problem Opening Pp Cs3 Project Files In Cs4 x7


    The first thing that I would look into would be to Import the CS3 Project, rather than Opening it.

    Next, I would "hide" those particular Assets, so that PrPro cannot find them. Then, Import them again, replacing the Off-lined versions in the Project Panel.

    Good luck,

    Hunt

  • RELEVANCY SCORE 2.85

    DB:2.85:Transitions In Premiere Pro Cc Not Working jf



    After upgrading from PP CS6 to PP CC on a Mac, the audio and video transitions do not work. I've tried dragging them in and using the keyboard shorcuts to no avail. All apps are updated as well. Suggestions?

    DB:2.85:Transitions In Premiere Pro Cc Not Working jf


    After upgrading from PP CS6 to PP CC on a Mac, the audio and video transitions do not work. I've tried dragging them in and using the keyboard shorcuts to no avail. All apps are updated as well. Suggestions?

  • RELEVANCY SCORE 2.84

    DB:2.84:Audio Works In Cs3 But Not In Cs4 sa



    For some reason when I try to create a project in Encore CS4 there is no audio. Even when I have opened a project that was successfully created in CS3 there is no audio. This is also true when editing video (mpeg) in Premiere Pro. Is there something I am doing wrong or is this a bug? Should I reinstall (a real pain)?

    Bill

    DB:2.84:Audio Works In Cs3 But Not In Cs4 sa


    Bruce,

    That is good news. There was an update to CS4 suite (4.0.2?) that broke some AC3 functions in PrPro. Could possibly account for some change in En CS4 too, but have not heard of that.

    If En is having an issue with muxed Assets, changing these to elemental streams,i.e. one Video-only file and one Audio-only file, often clears up problems. On a good day, En will handle muxed files. On a bad day, no way. Could be phases of the Moon, but I'd put the money on the multiplexing of that file.

    Last, CS4 4.1 update is out. One of the things that it fixes is AC3 handling in PrPro. Do not know if anything in En is affected by this new update. Still, I do not recall seeing issues with AC3 and En, in any of the two previous updates, only in PrPro. Still, who knows?

    Thanks for reporting your success,

    Hunt

  • RELEVANCY SCORE 2.84

    DB:2.84:Why Wont The Audio Will Play On The Pp Slide Show I Created On Another Computer sx


    I created the pp slide show with audio on my laptop running Windows 7. I saved it to a USB storage device. When I try to play it on my laptop running Windows XP, I only get the slide show-no audio.

    DB:2.84:Why Wont The Audio Will Play On The Pp Slide Show I Created On Another Computer sx

    Hi-yes, it is an mp3 file. I burned/copied the ppt to disc-it didnt give me any options regarding the audio. Are you saying if I use a wav instead of mp3, it should be stored on the ppt?

    thanks!

  • RELEVANCY SCORE 2.84

    DB:2.84:Wer Hat Erfahrung Mit Mainconcept Mpeg Pro Hd 4? 8k



    Hat jemand Erfahrung mit o.g. Plugin unter PP CS4? Wrde gerne das Smartrendering nutzen, hrte aber vor einiger Zeit von Problemen mit PP CS4.

    Wie gut sind die Codecs, Rendergeschwindigkeit etc. und die Ausgabe in 5.1?

    DB:2.84:Wer Hat Erfahrung Mit Mainconcept Mpeg Pro Hd 4? 8k


    Hat jemand Erfahrung mit o.g. Plugin unter PP CS4? Wrde gerne das Smartrendering nutzen, hrte aber vor einiger Zeit von Problemen mit PP CS4.

    Wie gut sind die Codecs, Rendergeschwindigkeit etc. und die Ausgabe in 5.1?

  • RELEVANCY SCORE 2.83

    DB:2.83:4.1 Blackmagic Decklink Sequence? 9x



    I'm using PP CS4 (Master Collection) and I do NOT see my Blackmagic Card to create a sequence using it.

    In CS3 when I started a new project I had the option to select a Blackmagic sequence.... is this option no longer available?

    I need to edit and Print to Tape via my Blackmagic Decklink.

    ---PPCS4 v4.1 Decklink v 7.1.2

    How do you guys set up a project/sequence to use/see your Blackmagic Card?

    DB:2.83:4.1 Blackmagic Decklink Sequence? 9x


    Hi there!

    Try reinstalling your Decklink drivers. For some reason, Blackmagic Design drivers aren't recognized if the drivers where installed before your editing app. But Premier Pro should see your Decklink and Blackmagic templates after you reinstall their drivers.

    HTH

  • RELEVANCY SCORE 2.83

    DB:2.83:No Audio p3


    When i build the DVD in encoreCS4 no audio goes onto the DVD. Doesn't seem to matter if I import an AVI file into encore or I send the PP timeline via dynamic link. Everything previews perfectly in Encore just no audio on the burnt DVD. I have only just upgraded to encore cs4 from Encore 2.0 and never had this problem once with 2.0.

    DB:2.83:No Audio p3

    When i build the DVD in encoreCS4 no audio goes onto the DVD. Doesn't seem to matter if I import an AVI file into encore or I send the PP timeline via dynamic link. Everything previews perfectly in Encore just no audio on the burnt DVD. I have only just upgraded to encore cs4 from Encore 2.0 and never had this problem once with 2.0.

  • RELEVANCY SCORE 2.83

    DB:2.83:Why Does The Waveform Disappear After Editing In Sound Booth? 9a



    It happens consistently with CS4 on 2 different computers. I right-click the audio track and select Edit in Adobe Sound Booth, and SB opens the audio for editing. I edit the audio, and it updates the audio. I know it does, because when I play back the edited section, it's correct. But the waveform is gone! I tried playing around with the display style -- disable and enable waveform, keyframes, etc. -- but the audio track doesn't display anything. I have to exit out of Premiere and re-start it to see the waveform again.

    Anyone else experience this?

    Also: when editing the audio in SB, is there a way to substitute the PP audio track with a multi-track? I know I can export a multitrack as an .aiff and import it into PP, but I was wondering if there's a way to link it.

    DB:2.83:Why Does The Waveform Disappear After Editing In Sound Booth? 9a


    How long do you wait for the waveform to appear? The .pek (or .pk) file

    would have to be re-generated for the changed audio, and if your audio

    file has a long duration, that could take a bit of time.

    Also: do you have to re-start Pr or just close and re-open the project

    to get the waveform to appear?

    -Jeff

  • RELEVANCY SCORE 2.83

    DB:2.83:Audio Capture Lost After Installing Snow Leopard m1


    Has anyone else had problems loosing their audio capture in Premiere cs4 after installing Snow Leopard?

    DB:2.83:Audio Capture Lost After Installing Snow Leopard m1

    Just wondering, is that a plug-in for Premiere?Similar problem with After Effects maybe?...http://blogs.adobe.com/keyframes/2009/08/after_effects_and_snow_leopard.html

  • RELEVANCY SCORE 2.82

    DB:2.82:Some Flip Cam Mp4 Clips Have No Audio sp


    I shot 150 XDCAM EX 720p mp4 video clips all from the same Cisco Flip Cam. I opened them in Premiere Pro CS4 using the XDCAM EX 720p setting. About half have audio. When I play them in Quicktime Player, they all have audio. What gives?

    DB:2.82:Some Flip Cam Mp4 Clips Have No Audio sp

    Load 'problem' clips into AME or QT and export audio to wav. See if that will help.

  • RELEVANCY SCORE 2.82

    DB:2.82:Premiere Cs4 sz


    I have audio on my clips but when I bring them in to the time line there is no audio??? (And no audio showing on the timeline???

  • RELEVANCY SCORE 2.82

    DB:2.82:Pp Cs4 Down Convert Hdv To Dv Ws kx


    I am new to PP CS4 but not new to video editing. I want to down convert HDV 1080 60i to NTSC DV widescreen and eliminate the black bars at the edges, caused by the mismatch in aspect ratio. The only option I can find is to crop the image in the mpeg encoder. With other encoders I have used there has been an option to stretch the image to correct the AR mismatch. Is the cropping the only option I have in PP CS4 or did I miss the obvious?

    Thanks.

  • RELEVANCY SCORE 2.82

    DB:2.82:Importing/Capturing To Pp From A Dvr mp



    Importing/capturing from a DVR

    I am trying to solve some issues for a client who is learning how to take clips of sporting events recorded on a DVR, adding graphics and visual/voice annotation to them, and publishing them on YouTube.

    The DVR is from DirectTV, model HR22-100, which my brief research indicates is quite popular. I dont know much about it, but it seems to record using an MP4 codec. These games are recorded in full resolution HD. The client is using a MacBook. He bought a dongle-type gadget called El Gato, and he has been able to move clips from the DVR onto the Mac this way, apparently in some proprietary format, and then the software that comes with this Gato converts them to QTs.

    The problem is that the results are in a 4:3 ratio, and the players are squeezed (toothpicks). Since he is using AE for the visual effects (he has both AE and PP, CS4, installed), weve tried various interpret footage settings to get a wider picture, but to no avail. Weve also tried the various settings on the Gato software, also no luck.

    The goal would be to have a frame with standard-def resolution, but at a 16:9 ratio; he doesnt have enough bitrate power on the Mac right now for HD resolution, and that would only increase bandwidth requirements all around.

    The idea workflow would be to bring the raw clips into PP, trim them, then move to AE for the effects, and back to PP to lay in narration, a music bed and wild crowd audio, and finally recompress back to MP4 or whats best for YT.

    Has anyone here captured directly into PP from this DVR box? Outputs include composite, component, S-video and HDMI, but no firewire. Of course on the MacBook, the only way in is through the firewire.

    One route might be through a component or HDMI to firewire converter. Can anyone recommend a decent but not too expensive converter? Device control is not important, the playback could be started manually from the DVR, the clips trimmed after.

    TIA for any advice and suggestions on this.

    DB:2.82:Importing/Capturing To Pp From A Dvr mp


    Google for ADVC-300 or ADVC-110 (I think those are the model numbers)

  • RELEVANCY SCORE 2.82

    DB:2.82:Keylite 1.2 Problem 8x



    I have created a 1 min 16 second composition which looks perfect in AEFX CS4 and which I saved as an AE file. However, when I tried to open it in PP CS4 it results in the attached image. I have used KeyLite before without a problem

    DB:2.82:Keylite 1.2 Problem 8x


    Thank you. I created a movie file as you suggested and imported it into Premiere Pro. Worked perfectly.

  • RELEVANCY SCORE 2.82

    DB:2.82:Sony Hd Camera 9c


    I have a Sony HDR-SR10 shooting in standard definition. When I import it into cs4 I get video but no audio... what am I doing wrong?

    Terry

    DB:2.82:Sony Hd Camera 9c


    didn't seem to work .. but I did strip the audio out of the file with Adobe Audition and saved the audio as Windows PCM wav file .. then in Premiere just imported the wav as the audio file .. now if the rendered video comes out I'll be fine till there is a fix so I dont have to do the AA step.

    Terry

  • RELEVANCY SCORE 2.82

    DB:2.82:Encore Cs4 Transcode Fails With Dynamic Link / Pp as


    I am using a HDV 1080-60i (1449x1080)29.97 clip with no editing on the timeline in PP CS4 which I "Send to Encore" with Dynamic Link. I open Encode and set the project to DVD with the default settings. The clip is imported into Encore and I select transcode now and use the default settings. Transcode starts and runs for a few seconds and then posts the error message "Encode failed". If I try to build a DVD I get the same results. I have tried the Dynamic link from Encore using "Import Premiere Pro Sequence" with the same results. However, if I import the HDV clip directly into Encore the transcode works fine - no errors and transcode completes successfully. If I set the Encore Project to Blu Ray instead of DVD (no down convert) transcode does not fail. Looks like a bug.

    DB:2.82:Encore Cs4 Transcode Fails With Dynamic Link / Pp as

    Hi Riamba,

    Yes, the Encore 4.0.1 patch solved the problem. :)
    Also, Premiere Pro did not post any errors decoding frames.

    Thanks, I have not have a chance to post an update.

    Hi Davevg,

    I had the problem with all HDV sequences I sent to Encore using dynamic link and encode/transcode (downconvert) to DVD.

  • RELEVANCY SCORE 2.82

    DB:2.82:No Video 1x



    Hi all,

    New to the CS4 family. I'm a novice to the video editing so pardon if I don't get all the jargon.

    I'm using a Supacam Digital Video Recorder (www.supacam.com), when I upload it to the computer, CS4 only plays the audio. It recognizes it as a video, but it does not show it. Any ideas? I've had to use the Arcsoft Software it came with in order to create it into a wmv, so CS4 will show audio and video. I'm hoping to skip this step altogether.

    Thanks in advance!

    DB:2.82:No Video 1x


    I'm using a Supacam Digital Video Recorder

    Premiere has a tendancy to work best with standard camera formats, which means DV, DVCPRO HD, HDV, etc. These types of consumer cameras often produce video that wasn't designed for editing. I generally recommend not using them.

  • RELEVANCY SCORE 2.82

    DB:2.82:After Effects And Photoshop Server Run In Background Upon Opening Encore Cs4 s9



    Hello all .

    Have Cs4 video suite. Received a trail to evaluate awhile back, am now doing so.

    One thing I can not seem to find a reason for is that when opining up encore, I notice that AE, Photoshop server and the dynamic link run in the background.

    Is that something that is supposed to happen. I have no AE or PP dynamic links in the project. AE,PP Big resource hog.Photoshop server as well.

    I did have links to AE and PP in the project at one time, but no longer.

    Every time I close the back ground programs, they come back up.

    This normal?? Is there a way to disable?

    Thank you for your time

    DB:2.82:After Effects And Photoshop Server Run In Background Upon Opening Encore Cs4 s9


    Hello all .

    Have Cs4 video suite. Received a trail to evaluate awhile back, am now doing so.

    One thing I can not seem to find a reason for is that when opining up encore, I notice that AE, Photoshop server and the dynamic link run in the background.

    Is that something that is supposed to happen. I have no AE or PP dynamic links in the project. AE,PP Big resource hog.Photoshop server as well.

    I did have links to AE and PP in the project at one time, but no longer.

    Every time I close the back ground programs, they come back up.

    This normal?? Is there a way to disable?

    Thank you for your time

  • RELEVANCY SCORE 2.82

    DB:2.82:Getting Burned Just Before The Burn: General Error j7


    After a bit of struggle getting CS4 on my machine, (an upgrade from CS3), I did a test project of a few short DV-based shorts and tried to burn a disk. Just after a successful transcode, it gives the "general error" error and stalls the burn. Same thing with burning a folder or an image. I also noticed that if I try to preview the project again after burning fails, it won't preview either (although it will before the burn attempt). Any attempt to bring in pre-rendered (*.mpg) files from any source hangs the whole machine.

    I have taken some of the advice from the forums, like removing the audio track, etc., to see if this helps, but so far it doesn't. I am running it on Windows 7 64bit, but it has not had any issues so far with PP CS4 or any of the other Adobe products compatible with the Vista 64bit OS.

    Machine stats:
    Intel Q9650 cpu
    Intel DG33-TL mobo
    8GB memory
    1TB RAID 0 for SD and HD files
    nVidia Quadro 540 graphics card
    No overclock or special tweaks

    Been using PPro since 1.0, but have not seen this problem before.

    Another perspective maybe helpful.

    Thanks-

    DB:2.82:Getting Burned Just Before The Burn: General Error j7

    This should read: My machine, for reasons I cannot figure out, cannot recognize any camcorder through Firewire (I generally use P2 cards anyway); I do not think this bears on this particular problem with Encore CS4.

  • RELEVANCY SCORE 2.82

    DB:2.82:Premiere Cs4 Audio Output With Decklink k8



    Hi,

    i found serveral posts in the net for my Problem, but no solution.

    Were on a WindowsXP machine with Premiere CS4 and a Blackmagic Decklink Card.

    If we choose a Sequence-Preset from Blackmagic Decklink (which is important for us) and choose the internal Soundcard for Audio Playback,

    we dont hear anything. The Audio is routed through the Decklink. We have tried everything to achieve that that audio will be played through the internal Soundcard, but it seems as if the Settings are overwritten by the Decklink Preset.

    In CS3 this Problem doesnt exist.

    Many thankx in advance for your help....

    Sascha

    DB:2.82:Premiere Cs4 Audio Output With Decklink k8


    oh, we have the actual CS4 Update and Deckling Driver installed.

  • RELEVANCY SCORE 2.81

    DB:2.81:No Audio Music On Powerpoint 2010 Presentations On My Windows 7 Computer, But Plays On Those That File Is Emailed To. mp



    Greetings!
    Made many PowerPoint presentations with PP 2003 with .wav music files embedded. Files were less than 2 megs. They played fine on my XP computer and on those I emailed them to. Got a new Dell Windows 7 computer in May 2010. Loaded Office 2003 on computer
    and all of a sudden, none of the PP presentations had any sound. Went through all the troubleshooting guides to no avail. Sound plays ok on all other media programs except PP.
    Purchased Office Home and Student 2010 to solve the problem. Installed it and opened previously made PP programs. Still no sound. Sent programs to friends via email.Sound plays ok on their computers. Uninstalled Office 2010 and downloaded PP Viewer
    from Microsoft. Opened PP programs. Still no sound. Checked audio volume settings and it is set on 'medium'.
    When a PP program is running with music embedded I hit 'ctrl t' and this brings up a task bar in the PP show. I click on the speaker icon. I click on 'mixer' and this brings up a volume equalizer of everything that is running with sound. No PowerPoint
    program is visible on the equalizer. It almost appears that some sort of command has been set to stop the audio in PowerPoint.
    Would be most grateful if anyone can offer a solution!
    Grazie tanti!
    Bald Eagle

    DB:2.81:No Audio Music On Powerpoint 2010 Presentations On My Windows 7 Computer, But Plays On Those That File Is Emailed To. mp

    Have you tried updating the drivers as suggested by Shyam pillai?
    If not, then try updating the drivers and check if you’re able to hear the sound. Refer to the link below for information on how to update drivers.
    http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isnt-working-properly

  • RELEVANCY SCORE 2.81

    DB:2.81:Cs4 Premiere Pro No-Response In 64-Bit Win7pc, I7 Cpu, 16g Memory .... Frustrated :) z8



    CS4 Premiere Pro hang in a new 64-bit Win7 PC, i7 CPU, 16G Memory .... frustrated

    (video no response, but audio is on)

    I have no idea what the root cause is:

    1. Win 7 vs. XP issue; OR

    2. 32-bit vs. 64-bit; OR

    3. CS4 needs to be upgraded to CS6?

    Need your help, how to fix it?

    Really Appreaciate!

    Forest

    DB:2.81:Cs4 Premiere Pro No-Response In 64-Bit Win7pc, I7 Cpu, 16g Memory .... Frustrated :) z8


    You open a clip in Media Info. Set it to tree view and post a screenshot of that treeview here on the forum.

  • RELEVANCY SCORE 2.81

    DB:2.81:Audio Files Not Playing In Left Viewer Window f3



    Hey all,

    Tried to edit some audio clips this morning and when playing the audio in the LEFT hand viewer window I got no sound output. Clips play fine if I drag them into the timeline. Any help appreciated. I'm new to PP so I'm sure Im just doing something wrong.

    DB:2.81:Audio Files Not Playing In Left Viewer Window f3

    What IS the audio?

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0.Report back with the codec details of your file, use the programs below.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainfo.massanti.com/.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

  • RELEVANCY SCORE 2.80

    DB:2.80:No Color Keying On Mac Cs4? zj


    I'm a long time After Effects user and have become interesting in integrating Premiere Pro into my workflow. But I'm a little surprised that PP doesn't have any "real" color keying tools.

    Am I supposed to roundtrip all my footage to After Effects, use Keylight, and go back to Premiere?

    DB:2.80:No Color Keying On Mac Cs4? zj

    Having done a few green screen projects in my time, here's my workflow...

    To begin, do your entire edit first. Just use the PPro keyer to do rough keys, but save the real keying for later. Also, make sure you leave a bit of head and tail on your shots to be keyed - this may come in handy when/if you add transitions after final keying.

    When you've locked your edit, create a folder called AE keyed projects (or whatever works for you).

    Then, go to your first clip to be keyed, remove the PPro keying effect (if used) and right click on the clip and select "Replace with AE composition". This should open AE. Save the project with a name that identifys which clip it is (I usually use clip 1, clip 2, etc.) and save in the AE folder created - this helps keep track of the files if you need to go back and make adjustments. Use Keylight to key in the BG.

    When done, switch back over to PPro and you should see the clip keyed on your timeline. Adjust the head and tail if needed.

    Then go on to the next clip and repeat the process...

    There are a couple ways to do this process - this is just mine.

  • RELEVANCY SCORE 2.80

    DB:2.80:Audio Settings For Premiere Pro Cs4 During Capture a7



    During some other discussions regarding audio challenges with PP CS4 someone pointed out that if you analyze a file with G spot it should be in WAV format. I did this and I see my footage is showing PCM Audio at 48000Hz 1536 kb/s tot (2 chnls). Based on the fact that I record SD footage (audio selected to 16 bit 48k) onto a Mini DV tape on a DVX 100B and export via Firewire into PP CS4 does that sound right?

    In the Preferences window I have Premiere Pro WDM Sound selected as the default device (Adobe default windows sound and creative ASIO are the other options) . The input and output in Audio Hardware Settings has the Buffer size sliding bar at about 25% across from the left and the Device 32-bit playback is unchecked.

    I am just worried about what my dialog will sound like by the time it is edited in PP and send to Encore to export to DVD.

    Thanks for any input you can offer.

    Cole

    DB:2.80:Audio Settings For Premiere Pro Cs4 During Capture a7


    In your situation, G-Spot just used "shorthand." That's why I always type the extra characters (unless I'm being very lazy) to get "PCM/WAV," when talking about Audio, especially with regards to DVD-spec. Audio.

    Nice Audio gear, BTW,

    Hunt

  • RELEVANCY SCORE 2.80

    DB:2.80:Importing Logos/Graphics Into Sequences (Premiere Pro Cs4) cf



    What is the best file format to use when importing vector graphics in PP CS4?

    EPS? AI?

    Also- what else should I consider when importing vector graphics?

  • RELEVANCY SCORE 2.80

    DB:2.80:Audio Not Playing On Timeline In Cs4 1a



    Hi Everyone, Sub: Audio not playing in AE CS4.

    I'm trying to author a video sequence with audio in AE CS4. It has to be synced bit by bit, mean to say voice to be matched to the video/sequence of animation.

    But im getting a huge problem here, my video works but my audio is not working i can't hear audio at all... i tried importing audio in mp3, mp4 wav format but no solution i face the same problem. But outside CS4 the audio play very fine, i even used many device to test the audio everywhere the audio is working fine.. and my system hardware(Sound) are up-to-date.

    i browsed google and tried all kind of solution provided there but no use. i used numpad+0 for voice but every time it starts from beginning like a ram preview. It is difficult from to adjust the voice in between/ sync to it exactly. I changed the settings by going to preferences and output but no use

    I badly need a solution... or i want to know CS4 is best or not or can't be used for authoring purpose. I feel its best for me to edit, author it and fast.

    Please guide me out of this problem, thanks in advance.

    Regards

    Sunder

    DB:2.80:Audio Not Playing On Timeline In Cs4 1a


    Hey thank you so much.. it really helped me .... very nice.. thank u....

  • RELEVANCY SCORE 2.79

    DB:2.79:Using Audioframes In Power Point 2008 For Mac (Ppt Format) m3


    Hi,
    I was redirected to this forum from
    this thread.
    I use PP 2008 for Mac. Create a new presentation (/testfolder/test.ppt), adding audioframe with external file (/testfolder/subfolder/test.mp3), save presentation in PPT format. Result was successfully opened in PP 2011 for Mac, but does not works correctly
    in all Power Point versions for Windows (wrong path to the audio file).
    The same presentation but created in PP 2007 for Win does not works in PP 2008 for Mac (but works fine in PP 2011 for Mac).
    I think that PP 2008 for Mac generates files (with audio frames), which can be used only in PP for Mac. So PP 2008 for Mac can't work correctly with files which generated in Windows versions of PP.
    I would like to receive comments
    on the issue.

    DB:2.79:Using Audioframes In Power Point 2008 For Mac (Ppt Format) m3

    I'mafraid that you have been redirected to a wrong forum.
    For Office for Mac specific topics, please visit the Office for Mac forums at Microsoft Community
    http://answers.microsoft.com/en-us/macMax Meng
    TechNet Community Support

  • RELEVANCY SCORE 2.79

    DB:2.79:Panasonic Tm700 1080/50p No Audio Track In Time Line j3



    Hi Guys

    I have PP CS5 5.0.3 and a Panasonic TM700 in 1080/50P mode, audio tracks are playable in the sequence monitor and when I edit a clip and drop it into the time line there is no audio in the time line at all. I have set up a custom preset in desktop mode and set it to 1080 50 progressive and to 5.1 sound. etc and saved it as TM700 preset.

    This has been frustrating me no end as you can apparently edit these files natively in PP CS5

    thanks

    DB:2.79:Panasonic Tm700 1080/50p No Audio Track In Time Line j3


    Hi

    Have you tried dragging some footage onto the new item folder (next to the dustbin) in the project panel to create a new sequence?

    This will setup a new seqence with the sound track that the clip is using.

    A good place to start.

    I have the TM700 and use it with CS5 PP all the time @1080/50p

    Gary

  • RELEVANCY SCORE 2.79

    DB:2.79:Superdrive Installation Disks Rejection pj


    I have a 2010 27" iMac just back from an Apple Authorized Service Provider. It's got a completely fresh install of OSX 10.7 but the Superdrive is acting weird.In an attempt to install CS4 Production Premium, it failed to mount disk 1. It spins up a few times and then spits the disk out.I tried an audio cd, and it played no problem.I tried a regular DVD movie, and it played no problem.Then I put in disk 2 of CS4 PP, and while it can't install or do anything without disk 1, I can hear that it makes noises like it's being read and I can see that it's recognised in Disk Utility.I then inserted the Applications Install DVD and it wouldn't mount, spun up a few times and then spat the disk out, exactly like the CS4 PP disk 1.All disks have been tested on another iMac running Mountain Lion and there's no problem with them.It appears that the only disks having problems are installation disks, and to be honest, it seems more like a software/OS glitch than a problem with the actual drive.Any help appreciated.

  • RELEVANCY SCORE 2.79

    DB:2.79:Issues With Cs4 From The Start - Importing And Playback dc



    Good Afternoon,

    I've had Premiere Pro CS4 as part of Production Premium installed for a while, but just now getting around to using it.

    I'm running it on an Early 2008 Mac Pro with 10 Gigs of ram with OS X Snow Leopard 10.6.1. When I import digital video from my Panasonic PV-GS500, the audio and video get out of sync from the very start. The video and audio are out of sync not only in Premiere Pro but in any program that plays the imported video. When I try to view the video in any of the preview windows in Premiere Pro, the video plays for about two seconds and stop even though the clip is sigficantly longer.

    I ran the Updater and updates Premiere Pro and anything that needed it to the latest version. PP is at 4.1.0

    Just for grins, I imported the same DV tape using the same camera in iMovie and it worked without issue. The audio and video are in sync and no issues with playback in iMovie or iDVD.

    I once used this same video camera on a PC running XP with Premiere Pro CS3 and it worked without issue.

    Any suggestions on what could cause these problems?

    DB:2.79:Issues With Cs4 From The Start - Importing And Playback dc


    Good Afternoon,

    I've had Premiere Pro CS4 as part of Production Premium installed for a while, but just now getting around to using it.

    I'm running it on an Early 2008 Mac Pro with 10 Gigs of ram with OS X Snow Leopard 10.6.1. When I import digital video from my Panasonic PV-GS500, the audio and video get out of sync from the very start. The video and audio are out of sync not only in Premiere Pro but in any program that plays the imported video. When I try to view the video in any of the preview windows in Premiere Pro, the video plays for about two seconds and stop even though the clip is sigficantly longer.

    I ran the Updater and updates Premiere Pro and anything that needed it to the latest version. PP is at 4.1.0

    Just for grins, I imported the same DV tape using the same camera in iMovie and it worked without issue. The audio and video are in sync and no issues with playback in iMovie or iDVD.

    I once used this same video camera on a PC running XP with Premiere Pro CS3 and it worked without issue.

    Any suggestions on what could cause these problems?

  • RELEVANCY SCORE 2.79

    DB:2.79:No Sound When Importing Footage cd



    Hi all, I'm new to CS4 and also have a new Camcorder (Sony HDR CX11e) I've taken some footage in STANDARD definition and dragged it from the memory stick to my hard drive. I can play it in windows media player fine but when i import it into PP the sound is missing, I don't have this trouble with my HD footage.

    Can anyone help please as I've been at it for a few days now and searched forums but still cant fix it?

    I'm running vista 64 bit windows and have updated CS4 and the file format I'm trying to import is .mpg

    DB:2.79:No Sound When Importing Footage cd


    Thanks guys, until late May it is then.

    All the best

  • RELEVANCY SCORE 2.79

    DB:2.79:Problem With Dl'd Razored Clips-Cs4 a1



    I razored a clip in the PP timeline and then dynamically linked the 1st clip with AE to chroma-key a background. It went fine.

    Then, when I tried to DL with AE on the 2nd razored part of the clip (of 3 parts), two clips popped up in AE but seem not to be linked to PP since I can't do anything with them in AE and the clip in PP is not showing as a "Linked Comp".

    I tried renaming the 2nd and 3rd razored clips, but no luck.

    Any idea what's wrong?

    Thx.

    Paul

    P.S. Could someone please respond to Problem with DL'd/keyed footage in HDV 720p60 sequence-CS4. Thx.

    DB:2.79:Problem With Dl'd Razored Clips-Cs4 a1


    I double-clicked the 2nd and 3rd razored clips into the source monitor. They already had in/out points, so I replaced the originals with these and the AE DL worked fine.

  • RELEVANCY SCORE 2.78

    DB:2.78:No Sound In Pp Cs5 With Creative X-Fi Titanium Card - Latest Drivers 1d


    I have the sound card set as default device, latest drivers, selceted in PP as audio device... but no sound. Meters show audio, but nothing from the speakers. Does not produce audio with tone and bars either. Card has ASIO driver and works in my win7 64 bit system with all other applications.

    PP does not see the Creative ASIO driver, and only offers PP WDM, but still nothing. Does anyone know if the Creative ASIO driver only supports 32 bit programs? Or is it a problem in PP? Any insight is appreciated, thanks!

    DB:2.78:No Sound In Pp Cs5 With Creative X-Fi Titanium Card - Latest Drivers 1d


    Make sure if you have more than one option in your Audio Hardware settings that you select the actual hardware that outputs your audio, sometimes virtual drivers or even drives for headphone inputs can be there.

  • RELEVANCY SCORE 2.78

    DB:2.78:Xd Cam Support 9m



    Hi Everybody,

    i really need help for importing some xdcam data.

    I've same xdcam data as shown in the picture an pp cs4 don't import..

    Is that type not supported or what do i have to do to get pp cs4 working with this type.

    j

    DB:2.78:Xd Cam Support 9m


    First import with Clip Browser to your hard disk, then import the complete BPAV directory and all subdirectories into PR.

  • RELEVANCY SCORE 2.78

    DB:2.78:Ipod Touch Not Displaying Vid Encoded With Pp Cs4 9f


    Hi - I'm trying to identify where this problem actually is so I am posting here. I received an iPod Touch for Christmas and loaded a vid encoded with PP CS4 specifically for the iPod - both large and small. The source was from a Canon HG10 and has displayed well on Vimeo, YouTube, and a classic iPod, but when I downloaded the vid to the Touch I get audio but no video. Any ideas?

    DB:2.78:Ipod Touch Not Displaying Vid Encoded With Pp Cs4 9f

    When I used to export to ipod format from quicktime it used to make it 320x240 but now it's keeping my original 720p dimensions with no options to change it to the smaller ipod dimensions. I think the change happened around quicktime version 5. How can I use quicktime to get the dimensions I want for ipod m4v files?

  • RELEVANCY SCORE 2.78

    DB:2.78:No Audio In Pp When Opening With Keynote 3a


    When I receive a ppt presentation, open it with Keynote and play a slide show, I get no audio. If I open it with PowerPoint I get the audio. What's up with that? Shouldn't I be able to hear powerpoint audio with Keynote?

    Thanks for some insight on this.

    DB:2.78:No Audio In Pp When Opening With Keynote 3a

    When I receive a ppt presentation, open it with Keynote and play a slide show, I get no audio. If I open it with PowerPoint I get the audio. What's up with that? Shouldn't I be able to hear powerpoint audio with Keynote?

    Thanks for some insight on this.