• RELEVANCY SCORE 4.12

    DB:4.12:Inspiron 8200 - Dual Monitor Problem (Restarting Leaves Monitor Turned Off) 3f





  • RELEVANCY SCORE 4.06

    DB:4.06:Dual Monitor Problem 1f





    Hi all,

    DB:4.06:Dual Monitor Problem 1f

    I ordered a different video (dual) video card ... I had to order it online becuase of the mini-tower factor.  It should be here on Thursday.   It has one VGA port and one DVI port.

  • RELEVANCY SCORE 4.06

    DB:4.06:Hp P7-1187c Dual Monitor 2nd Monitor Black 77






    After using the dual monitors without a problem for around 6 months, the secondmonitor now will not wake up/stays dark for whatever reason. I've restarted, switched monitors and switched cables but still the 2nd monitor does not want to play. Can anyone help me with this??

    DB:4.06:Hp P7-1187c Dual Monitor 2nd Monitor Black 77

    Hi,

    Thank you for the information. To test on other option, can you start the computer with just the VGA connected monitor. Are you able to see the images on the monitor?

    Another option to try is 'Updating the BIOS'. I have included the document to walk through the steps of making sure that your BIOS is fully updated.

    Please let me know if the works, thank you.

  • RELEVANCY SCORE 4.06

    DB:4.06:Dual Monitor 77


    I connected a 20 monitor to my laptop because the laptop screen is damaged. My problem is I can't seem to get the desktop (with all the icon's)to transfer from the laptop to the new monitor. Please Help.

    DB:4.06:Dual Monitor 77

    yes you will use the function key with one of the F keys at the top of the keyboard and since most laptops are different you will have to see which F key it is as I said it could be a F key that says LCD or it could be a F key that has two monitors on
    it. Tell me what kind of laptop you have.

  • RELEVANCY SCORE 3.89

    DB:3.89:Using Tv With Dual Monitors 33


    So here's the setup:

    AGP Video Card: ATI All-In-Wonder 9000 Pro ( primary )
    PCI Video Card: ATI Radeon 9250 by Sapphire

    The second PCI card was purchased primarily for dual monitor support, both monitors are VGA. The AIW 9000 AGP is configured as my primary card. In my Control Panel Display Settings tab, I see 4 display adaptors - 9000, 9000 secondary, 9250 and 9250 secondary. After installing Hydravision - ATIs dual-monitor software, I can make the dual functionality work by enabling the radion button "Extend my Windows desktop onto this monitor" in the display settings tab. The only two combinations that result in working dual monitors is 9000 (primary), 9250 (extension monitor), or vice versa in the settings tab.

    Andhere's the question:

    When I enable monitor extension, the ATI TV no longer works. It flags the error: "Unable to start TV. The TV player failed to initialize the video ...", and requests that I use the PC Check utility to diagnose the problem, the utility does not prove useful in identifying the problem. Disabling monitor extension resolves the problem. I purchased the second PCI video card to provide an extra VGA port for my second monitor, primarily so that the TV could run on one monitor and my other application on my primary monitor. Anybody have the same problem, and even better a solution to this.

    Thanks

    DB:3.89:Using Tv With Dual Monitors 33

    So here's the setup:

    AGP Video Card: ATI All-In-Wonder 9000 Pro ( primary )
    PCI Video Card: ATI Radeon 9250 by Sapphire

    The second PCI card was purchased primarily for dual monitor support, both monitors are VGA. The AIW 9000 AGP is configured as my primary card. In my Control Panel Display Settings tab, I see 4 display adaptors - 9000, 9000 secondary, 9250 and 9250 secondary. After installing Hydravision - ATIs dual-monitor software, I can make the dual functionality work by enabling the radion button "Extend my Windows desktop onto this monitor" in the display settings tab. The only two combinations that result in working dual monitors is 9000 (primary), 9250 (extension monitor), or vice versa in the settings tab.

    Andhere's the question:

    When I enable monitor extension, the ATI TV no longer works. It flags the error: "Unable to start TV. The TV player failed to initialize the video ...", and requests that I use the PC Check utility to diagnose the problem, the utility does not prove useful in identifying the problem. Disabling monitor extension resolves the problem. I purchased the second PCI video card to provide an extra VGA port for my second monitor, primarily so that the TV could run on one monitor and my other application on my primary monitor. Anybody have the same problem, and even better a solution to this.

    Thanks

  • RELEVANCY SCORE 3.81

    DB:3.81:Can't Get High Resolution On Dual Monitor Setup With Hp 8740w Elitebook fm



    I have an 8740W Elitebook laptop with nVidia Quadro FX2800M graphics card. I am trying to run dual monitors (Dell U2711 27" monitors with native resolution of 2560 x 1400. One monitor will show this resolution, but the second shows a max resolution available of 1680 x 1050. I've downloaded the latest nVidia driver from the HP website, but the problem remains. I've also tried connecting each monitor separately, and each will show the high resolution separately, but in Dual Monitor mode, it defaults back to the lower resolution on the second monitor. Does anyone have any ideas on how to get the maximum resolution on both monitors? Will a different graphics card solve the issue?

    DB:3.81:Can't Get High Resolution On Dual Monitor Setup With Hp 8740w Elitebook fm


    I have an 8740W Elitebook laptop with nVidia Quadro FX2800M graphics card. I am trying to run dual monitors (Dell U2711 27" monitors with native resolution of 2560 x 1400. One monitor will show this resolution, but the second shows a max resolution available of 1680 x 1050. I've downloaded the latest nVidia driver from the HP website, but the problem remains. I've also tried connecting each monitor separately, and each will show the high resolution separately, but in Dual Monitor mode, it defaults back to the lower resolution on the second monitor. Does anyone have any ideas on how to get the maximum resolution on both monitors? Will a different graphics card solve the issue?

  • RELEVANCY SCORE 3.80

    DB:3.80:Acer Predator G3620 Dual Monitors Issue 3d



    So iv gotten myself another monitor and iv got a problem like iv got my main monitor setup with a HDMI mini cable but there is no second HDMI mini or a normal HDMI and there is a VGA cable spot which is blocked... anyone have any ideas how i can connect my second monitor?







    Solved!
    Go to Solution.

    DB:3.80:Acer Predator G3620 Dual Monitors Issue 3d


    Can you send me a private message with your serial number so I can tell the exact specifications of your system. Different models of the G3620 have different video output options.





    Important Links: US Driver Downloads | Knowledge Base Articles | Service LocationsRemember to mark posts that resolved your issue with Accept as Solution.You can even mark multiple posts in a single thread. This will make it easier for others to find the same information.

  • RELEVANCY SCORE 3.79

    DB:3.79:Dual Screen Problem d3


    Hi,I am new to 3ds max, and I am running two monitors. Whenever I use 3ds max on the larger secondary monitor, and zoom or pan, the cursor reverts #40;moves#41; to the smaller primary monitor. Any suggestions on how I correct this problem?

    DB:3.79:Dual Screen Problem d3

    I don't think Max likes to run its main window in the secondary monitor. I think I've heard people having other problems when doing so.Why not make your larger monitor the primary one? That will probably help.



    3ds Max 2009 SP1, 2010 SP1Maya 2012Windows 7 Professional 64-bitDual Intel Xeon E5520, 6 GB RamNVIDIA GeForce GTX 460 OC

  • RELEVANCY SCORE 3.79

    DB:3.79:Dual Monitor - Monitor Detected But No Display On Screen 3k


    original title:dual monitor

  • RELEVANCY SCORE 3.79

    DB:3.79:Re: Acer Aspire E1-571 - Dual Monitor 13



    Is there the same problem for the acer aspire "acer aspire e1-571" because I have an exteral VGA port and there is an alternative fn in the F5 touch however I can't use the dual monitor mode, if it is the not supported then tell me beacause it will be a serious problem

    [moved to proper forum and title changed]

    DB:3.79:Re: Acer Aspire E1-571 - Dual Monitor 13


    No, it's a completely different issue. The previous thread was regarding a desktop, not a notebook.

    Yes, you should be able to connect another monitor via the VGA and use it as a second screen.

    Generally speaking, the Display Toggle will be Fn + F4 and display an icon like this:

    If you are pressing Fn + F5 and there is this icon it will blank the screen.





    Important Links: Global Support Pages | Knowledge Base ArticlesRemember to mark posts that resolved your issue with Accept as Solution. You can even mark multiple posts in a single thread. This will make it easier for others to find the same information. Use the Give Kudos button to offer a thumbs-up for good post content and a pat on the back to the author.

  • RELEVANCY SCORE 3.71

    DB:3.71:Maya And Geforce, Dual Monitor Solution a1


    For those who don't already know Maya, a geForce driver and dual monitors don't mix so well. In fact they don't work at all. If any one has a solution to this problem please, please let me know.

    DB:3.71:Maya And Geforce, Dual Monitor Solution a1

    For those who don't already know Maya, a geForce driver and dual monitors don't mix so well. In fact they don't work at all. If any one has a solution to this problem please, please let me know.

  • RELEVANCY SCORE 3.69

    DB:3.69:Client Session And Dual Monitor Support 1z


    Hello everyone,i´m facing a huge problem with terminal Services and 2 monitors in a single session. Well, I know that Windows RDP 6.1 supports dual monitors using the /span command. But, this isn´t really work well, hence the /span command extend the first monitor and do not create the second monitor itself. My questions is, is there a way to tell windows in which monitor you want to open the session? i mean, session 1 opens on monitor 1 and session 2 opens in monitor 2.i appreciate for help in advanceRogério

    DB:3.69:Client Session And Dual Monitor Support 1z

    Hi,RDP 7 will support this feature when connecting to Windows 7 or Windows 2008 R2 Server.Until then you may want to take a look at http://www.ishadow.comDuals your monitor anywhere :)Citrix Technology Professional, PubForum.net Founder, LinkedIn, TS Training in Europe! Love Microsoft its people to bits!

  • RELEVANCY SCORE 3.69

    DB:3.69:Thread: Dual Monitor Support? 1m


    Is there going to be dual monitor support in zenworks 7?

    DB:3.69:Thread: Dual Monitor Support? 1m

    Patrick,

    because it uses VNC...

    -' + '-

    Shaun Pond

  • RELEVANCY SCORE 3.66

    DB:3.66:3000 N200 Dual Monitor Display Problem zj


    Hello,Recently bought an 3000 N200. I cannot able to receive signal to my external LCD monitor. (BenQ FP202W 20"). When I try to connect old CRT monitor vista popups "A new monitor found" window. But that dosent work on BenQ.Any suggestions?

    DB:3.66:3000 N200 Dual Monitor Display Problem zj

    Hello,Recently bought an 3000 N200. I cannot able to receive signal to my external LCD monitor. (BenQ FP202W 20"). When I try to connect old CRT monitor vista popups "A new monitor found" window. But that dosent work on BenQ.Any suggestions?

  • RELEVANCY SCORE 3.66

    DB:3.66:Using Tv With Dual Monitors 1m



    So here's the setup:

    AGP Video Card: ATI All-In-Wonder 9000 Pro ( primary )
    PCI Video Card: ATI Radeon 9250 by Sapphire

    The second PCI card was purchased primarily for dual monitor support, both monitors are VGA. The AIW 9000 AGP is configured as my primary card. In my Control Panel Display Settings tab, I see 4 display adaptors - 9000, 9000 secondary, 9250 and 9250 secondary. After installing Hydravision - ATIs dual-monitor software, I can make the dual functionality work by enabling the radion button "Extend my Windows desktop onto this monitor" in the display settings tab. The only two combinations that result in working dual monitors is 9000 (primary), 9250 (extension monitor), or vice versa in the settings tab.

    Andhere's the question:

    When I enable monitor extension, the ATI TV no longer works. It flags the error: "Unable to start TV. The TV player failed to initialize the video ...", and requests that I use the PC Check utility to diagnose the problem, the utility does not prove useful in identifying the problem. Disabling monitor extension resolves the problem. I purchased the second PCI video card to provide an extra VGA port for my second monitor, primarily so that the TV could run on one monitor and my other application on my primary monitor. Anybody have the same problem, and even better a solution to this.

    Thanks

    DB:3.66:Using Tv With Dual Monitors 1m


    I'd just like to say that all of this really excites me. I've been considering hooking my tv up to my PC besides the monitor but now I got more motivation to do it thanks to everyone here.

    Tom

  • RELEVANCY SCORE 3.64

    DB:3.64:Re: Autocad 2011 Dual Monitor Problem zp


    I have a dual monitor setup and when autocad 2011 is positioned on the secondary monitor the drawing window lags to the point of no usability. If autocad 2011 is on the primary monitor it runs quick.With autocad 2010 I could have two instances running on both screens with no lag.

    Has anyone else encountered this?

    specs:
    macbook pro with windows xp sp3 on bootcamp
    nvidia geforce 8600m GT (latest drivers)
    4gig ram
    core 2 duo 2.4ghz

    DB:3.64:Re: Autocad 2011 Dual Monitor Problem zp

    It's that way now. Thanks for the reply. Didn't have this issue with 2010.

  • RELEVANCY SCORE 3.64

    DB:3.64:P6370t Dual Monitor Output pd



    Does the p6370t on-board graphics support dual-monitor output?

    DB:3.64:P6370t Dual Monitor Output pd


    Sorry for the delay.

    I cannot verify dual monitors (yet), but I *can* verify that both the VGA *and* DVI ports work on my p6370T...and I am driving my monitor at its native 1920x1080 via DVI...and Hulu (et al) works great!

    (i3 530)

  • RELEVANCY SCORE 3.59

    DB:3.59:2 Computers On Dual Input Monitor? z1


    I just recieved a new Dell 17" Ultrasharp monitor with digital and analog inputs. Would it pose a problem for the monitor or video adapters to connect 2 different computers to the monitor and use the input button to switch back and forth?
    Thanks

    DB:3.59:2 Computers On Dual Input Monitor? z1

    Thanks, Steve. I figured that would work but didn't want to find out the hard way if it was a bad idea.

    Rich

  • RELEVANCY SCORE 3.58

    DB:3.58:Problem With Fme 2.5 And Dual Monitor Setup f8


    I can only start and run FME from my primary monitor. If I
    move FME to my second monitor and try to stream it stops. If I
    start it on my primary monitor and then drag or minimize it to my
    second monitor it stops. Anyone else having this sort of problem,
    or know of a fix? Thank You

  • RELEVANCY SCORE 3.57

    DB:3.57:G 5 Dual 2 Ghz --Agp Monitor Card Not Working x9


    Hello
    m G5 is not loading the monitor ( stays black)
    used multiple agp cards (ATi 9200 and ATi 96000 Pro.). both the mac edition...
    only after multiple booting the monitor shows up.
    ( the same problem with different monitors using apple cinema display 20 inch)
    so it needs to be an internal problem maybe ram?
    or can it be the agp bus

    a pci monitor card works perfectly..

    DB:3.57:G 5 Dual 2 Ghz --Agp Monitor Card Not Working x9

    Hey Did you ever solve this problem?

    I'm having the exact same problem with my G5.

    It takes 3 tries to fire up. Black screen otherwise. All the motors are humming, just the black screen blues.

    Any leads?

    Let me know please.

    Email me:
    barney@shrimps.ca

  • RELEVANCY SCORE 3.57

    DB:3.57:Dual Monitor Dispaly Hp6203uk 7j



    Help please, I have a one month old PC as above, according to the driver details Intel (R) G41 chipset, this will make a dual monitor option viable. However; nothing works. I do not have the option for a dual monitor in any mode or display panel.

    Maybe I have missed the point and it wont work with this PC, problem is I cant find out, with HP support it wont even accept my serial number to check.

    I can plug in another monitor, using 2 VGA adaptor cables and can clearly see the other screen, but it just shows the same on both screens.

    Desperate for help as nowadays you cant ring anyone and ask them. My monitor is the latest packard Bell WS230WS

    rgds JOHN

    DB:3.57:Dual Monitor Dispaly Hp6203uk 7j


    Try reading this document, http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01950657cc=uslc=endlc=enproduct=4032859

    Cheers,

  • RELEVANCY SCORE 3.57

    DB:3.57:T440 + Dock + Dual Monitor Not Working j9


    Hi,Got a T440 with the Intel integrated graphics (no NVIDIA). Problem is that I cannot get dual monitor to work in the dock. Dock is updated to firmware 2.17.Running one external monitor with DVI work fine either mirroring laptop display or extending. But once I connect the second display with analog cable, the second display blanks out and the first which uses DVI has its resolution lowered and you can see pixelation errors.Dual monitor works fine in Win 8.1.Any ideas? I am running Ubuntu 14.04 latest update.BR,Ulrich

    DB:3.57:T440 + Dock + Dual Monitor Not Working j9

    No, switched to a T430 which works out of the box. Also, I did not like thetouchpad.BR/Ulrich

  • RELEVANCY SCORE 3.57

    DB:3.57:Dual Monitor Problem M8330f mz


    my desktop wont pick up my second vga monitor it picks up my primary dvi one though. and my vga works when its the only one connected i dont know whats wrong with it. please help.

    DB:3.57:Dual Monitor Problem M8330f mz


    Hi darthlaidher,

    See if the steps in this HP Support document on connecting more than one monitor help.

    Let us know how it goes.

  • RELEVANCY SCORE 3.57

    DB:3.57:How To Setup Up Dual Monitors 8j


    Can you set up a dual monitor for the imac?

    DB:3.57:How To Setup Up Dual Monitors 8j

    Depending on what iMac model you have, you need an adapter from the type of connector on your iMac video output (Mini DVI, Mini Display port, or Thunderbolt) to what ever connector you have on the external screen (DVI, VGA, HDMI, Thunderbolt) and the proper cable to link the two.To setup the displays, open system preferences, Displays, and set it up the way you want it (extended display or mirrored)

  • RELEVANCY SCORE 3.57

    DB:3.57:Dual Monitor Problem The Reverting Change The Size Of All Items md


    Hello!

    DB:3.57:Dual Monitor Problem The Reverting Change The Size Of All Items md

    Don't expect answers soon, dude. I've been waiting for an answer for more than a year now.

  • RELEVANCY SCORE 3.56

    DB:3.56:K8n Neo2 And Pny 6800u Dual Monitor Problems ac




    Has anyone had a problem with a dual monitor setup with the 6800's? My primary monitor loses signal when I open an application/game. The secondary monitor is fine though. Even if the secondary monitor is diabled, but still plugged in the same problem occurs.

    DB:3.56:K8n Neo2 And Pny 6800u Dual Monitor Problems ac


    I have been running dual monitor setup for over 3 years. You can run a game on one monitor and have the other monitor show a picture as long as the reloutions are the same on both. You can not access it unless you alt-tab, but you can see it. It should not go blank. Also I have tried this with my other mobo (ASUS P4C800-E) works fine no signal loss.

    I was told by PNY tech support that the primary port is the on closest to the mobo. Who knows if they have a clue what they are talking about, but it realy doeasn't matter because you can change the settings to whatever you want it to be.

    I can have the secondary monitor disabled in the properties and I will still get the signal loss on the one enabled. So what does that mean?

  • RELEVANCY SCORE 3.56

    DB:3.56:User Has Problem Using A Usb Keyboard And Mouse With A Duel System And Dual Monitor Setup. a9


    DB:3.56:User Has Problem Using A Usb Keyboard And Mouse With A Duel System And Dual Monitor Setup. a9

    U need to get a KVM that supports mixed USB signals out. I had the same issue and I had to switch to a Belkin (can't remember the model number)
    Message Edited by Madnotcrazy on 04-12-200612:54 PM

  • RELEVANCY SCORE 3.55

    DB:3.55:Dual Monitor Through S-Video fx


    Will windows vista recognize a dual monitor through an S-video cable?

    DB:3.55:Dual Monitor Through S-Video fx

    Hi,

    Please respond to the following so that we can assist you better.
    Who is the display adapter manufacturer?
    Are you trying to use dual screen for the computer?

    There are many display adapters in the market which supports dual screen with HDMI, DVI, Svideo, Composite and VGA ports.
    You need to be sure that your display adapter supports the dual screen feature.

    Understanding multiple monitors
    http://windowshelp.microsoft.com/Windows/en-US/help/c90105a0-57c1-4f0e-b095-b5ed1de8fc431033.mspx

    Set up multiple monitors
    http://windowshelp.microsoft.com/Windows/en-US/help/90b6964d-2673-40e5-9fdf-6edad3916af31033.mspx

    Change display settings on multiple monitors
    http://windowshelp.microsoft.com/Windows/en-US/Help/bf07ad1c-18e1-4530-ba16-cae19028e8ea1033.mspx

    Troubleshoot multiple monitor problems
    http://windowshelp.microsoft.com/Windows/en-US/Help/e6cf7ff3-1486-4a1e-bdf0-00478ef301891033.mspx

    Regards,

    Niranjan
    Microsoft Answers Support Engineer
    Visit our
    Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 3.55

    DB:3.55:Dual Monitor Refreshing Issues ak


    I've got a QuadroFX4600, I'm having issues with the hypershade and render window not refreshing on my second monitor.So basically i'm confined to work on one monitor.Any one got any suggestions?I've noticed this same problem from version 8

    DB:3.55:Dual Monitor Refreshing Issues ak

    Maya is an OpenGL application. There is no native DirectX support within Maya. Maya supports HLSL shader displays within the default Maya viewport with a plug-in. . These are, however, natively rendered composited images displayed through OpenGL.Cheers

  • RELEVANCY SCORE 3.52

    DB:3.52:Dual Monitor Mode Causes Lag In Edit Response 11


    Has anyone seen this problem? In single monitor mode the response to edit moves is quite fast, in dual monitor mode that is a frustrating lag in response. Thanks in advance for any help you can share.

    DB:3.52:Dual Monitor Mode Causes Lag In Edit Response 11

    Has anyone seen this problem? In single monitor mode the response to edit moves is quite fast, in dual monitor mode that is a frustrating lag in response. Thanks in advance for any help you can share.

  • RELEVANCY SCORE 3.52

    DB:3.52:Imovie Dual Monitor Configuration 9f


    I have a mac book pro which works with a secondary monitor in dual screen mode, but the problem is that programmes like imovies don't seem to have a dual screen function. Even in IDVD you seem to have to drag the full screen mode box onto the second desk top - rather than having a second seprate screen for playback. Is there any way round this?

    DB:3.52:Imovie Dual Monitor Configuration 9f

    Dan3,

    There is a preference in iMovie that allows video playback to a connected DV camera.

    If your camera is capable of it, you could then connect it to a television to see your movie as it plays in iMovie.

    It's not quite what you're looking for, but I thought I'd mention it anyway.

    Matt

  • RELEVANCY SCORE 3.52

    DB:3.52:Dual Lcd Monitor Problem - Need Help With This 19


  • RELEVANCY SCORE 3.52

    DB:3.52:Dual Monitor Problem 1z


    When using dual monitors, the main monitor will randomly black out, and is unable to be used until I power the screen on and off. Secondary monitor still functions when this happens. Screen saver works fine, interchanging between both monitors, icon scrolling back and forth is fine also. Sleep display modes are set at "0", have changed but no visual change.

    Any ideas?

    Thanks

    DB:3.52:Dual Monitor Problem 1z

    Turned out to be an internal monitor problem, sent back for a new one.

    Thanks anyway!

  • RELEVANCY SCORE 3.52

    DB:3.52:Hdmi And Dvi Dual Monitor Hook Up Problem ap



    I have an 8330F 9500 HP tower currently with 22 in lcd monitor (DVI) and I am trying to hook up 2nd monitor LED 24 inch HDMI but I keep getting check signal cable on the scond monitor. Help pleas

    DB:3.52:Hdmi And Dvi Dual Monitor Hook Up Problem ap


    Hi,

    Based on its specs:

    http://h10010.www1.hp.com/wwpc/ca/en/ho/WF06b/12132708-12133156-12133158-12133158-12133158-81574412-...

    it has nVidia GF 8500 GT video card. Have you checked this before buying the second monitor ? Sadly to say, this card can not handle 2 HD digital monitors at the same time. You may switch one monitor to analog and see how you go.

    Good luck.

  • RELEVANCY SCORE 3.51

    DB:3.51:Dual Monitor Display x1



    I have a Satellite A105-S4064. I am trying to set up my tv as dual monitor. I am using a 4 pin to 4 pin S-video cable and can get the tv to run as a clone just fine by using Fn + F5 to toggle over to TV. I had given up and decided that my graphics card would not support dual monitor until i was told that if the second monitor shows up in the settings tab of the display properties then it should work. When I set the second monitor as attached, my tv just shows no signal.I tried a couple different resolutions but did not think that was the problem since it works as clone. Any help would be appreciated. I can also get more information if it is needed.

    ZJ

    DB:3.51:Dual Monitor Display x1


    I have a Satellite A105-S4064. I am trying to set up my tv as dual monitor. I am using a 4 pin to 4 pin S-video cable and can get the tv to run as a clone just fine by using Fn + F5 to toggle over to TV. I had given up and decided that my graphics card would not support dual monitor until i was told that if the second monitor shows up in the settings tab of the display properties then it should work. When I set the second monitor as attached, my tv just shows no signal.I tried a couple different resolutions but did not think that was the problem since it works as clone. Any help would be appreciated. I can also get more information if it is needed.

    ZJ

  • RELEVANCY SCORE 3.50

    DB:3.50:Dell E520 And Radean X1300 Video Card - Dual Monitor Problem ;-( pd


    Hi

  • RELEVANCY SCORE 3.47

    DB:3.47:Dual Monitor Problem 9f


    I have plugged in my Samsung 2333HD monitor. At first the T60's XP Pro OS picked up the new monitor and it displayed on the new Samsung with the T Pad's monitor blank. Now the T Pad's monitor is on and the desktop is available, but on the Samsung there is nothing but the screenshot. No icons or anything esle. What am I missing here???

    DB:3.47:Dual Monitor Problem 9f

    If its just the wallpaper then it is the extended display. The other display has the icons. You should see be able to see your mouse on it if you just move your mouse to the right. If you right click and view the display settings you can see that both are there. Now if you want them both to show the same, then you will need to check intels, nvidias, or ati's graphics settings to clone it.



    IT Specialist and ConsultantLenovo Tablet EvangelistCurrent Machines: IdeaCentre A300, ThinkPad Tablet, ThinkPad L410, and IdeaPad U410 Touch Deutsche Community Comunidad en EspañolLenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

  • RELEVANCY SCORE 3.47

    DB:3.47:Fcp 6.0.2 Won't Hide cm


    I've tried Cmd-H,
    Final Cut Pro - Hide
    and hiding from the dock icon, and nothing happens.

    I currently use a dual monitor setup. FCP on monitor one, Playback on monitor two. Hiding problem persists when I mess with that.

    DB:3.47:Fcp 6.0.2 Won't Hide cm

    Or you might just turn your monitors around.

    Sorry, couldn't resist!

  • RELEVANCY SCORE 3.46

    DB:3.46:Problem With Xenapp Dual Monitor And Lync 9f


    Just curious to see if anyone else has expierenced any issues with XenApp 5 with Lync as a published app on dual monitors.If you right click a contact or select some of the drop downs, Lync will crash. This does not happen on single monitor
    configurations.

  • RELEVANCY SCORE 3.45

    DB:3.45:T60 Vista And Dual Monitor Support sm


    I have a Lenovo T60 running on Vista 32-bit. I have the latest Video Drivers, but whenever my laptop comes out of hibernation I lose dual monitor support. Is there a solution to this problem?

    DB:3.45:T60 Vista And Dual Monitor Support sm

    The issue you're facing is a combination of a Vista "bug" and the video drivers. If you are using the latest video drivers, check to see that Vista is not managing the TMM - Vista has a bad habit of just remembering the initial setup, therefore when you take your computer off the dock, Vista doesn't like the change and will "conveniently" forget any variation of settings you may introduce.Read this article on TMM for Vista (.doc file - read the first section)Hope that helpsMessage Edited by icantux on 04-28-2008 08:34 PM

  • RELEVANCY SCORE 3.43

    DB:3.43:Dual Monitor Problem, Windows Xp. d7


    I'm using Windows XP. I attached a second monitor via a splitter cable and the display shows on both screens. HoweverI cannot extend the desktop across two screens because when I go to the display options in Control Panel, only one monitor
    is shown. Can anyone help pleasde. Thanks

  • RELEVANCY SCORE 3.43

    DB:3.43:Dual Screen Problem After Working For A While, My Laptop Screen Goes Blank 8p


    Original Title: Dual screen problem

    I use dual screen (laptop screen and separate monitor screen) at work. Operating system Win 7. After working for a while, my laptop screen goes blank as if it goes to sleep mode. Monitor screen never goes off. Is it cos win 7 doesnt support dual screen spl
    laptop and monitor at the amse time?

    I was told by IT Support that it does not support and laptops are not designed to operate as dual screens? Please advise.

    Kr
    bs3dm

    DB:3.43:Dual Screen Problem After Working For A While, My Laptop Screen Goes Blank 8p

    Laptops do support dual monitors. The issue can be caused by two reasons:
    1. Incorrect power setting.

  • RELEVANCY SCORE 3.43

    DB:3.43:Problem With Dual Monitor xz


    My user has a docking station and after hit the function f7 key and set it for dual monitors, I can not get it to revert back to default settings. I am getting BSOD everytime I try and change that setting. Any Ideas?

    DB:3.43:Problem With Dual Monitor xz

    Are you using Presentation Director? If not, use it and set up a docked, two monitor profile . Also set up undocked LCD profile and it will take care of it .

  • RELEVANCY SCORE 3.41

    DB:3.41:Dell Inspiron 530 With Ati 2400 Hd Dual Monitor Problem sj


    DB:3.41:Dell Inspiron 530 With Ati 2400 Hd Dual Monitor Problem sj

    My specific problem is with one monitor connected to VGA and my tv connected to SVideo.  ATI Catalyst program can swap the desktop between the two, but never display on both at the same time.  I haven't tried the latest Catalyst from ATI website since it warned me that it requires .Net Framework 2.0...  Would that fix the issue?  My older X300 ATI card had no problem like this...
     
    I'm even considering switching to NVdia card, since the latest graphics card not supporting this simple feature seems rather stupid.

  • RELEVANCY SCORE 3.41

    DB:3.41:Dual 23 Inch Mouse Disappears On Left Monitor Only 81


    Running Leopard 10.5.2 with Dual monitors. ATI Radeon 9800 card AGP on Dual G5 Mac 2.5 MHz
    I can see everything fine on both monitors and can drag windows to both monitors. The only problem is that the mouse disappears on the left monitor. But if I'm good, I can grab windows there and move them (pain in the ***).. I just can't see the mouse !!!!

    Can anyone help me here ?

    DB:3.41:Dual 23 Inch Mouse Disappears On Left Monitor Only 81

    Running Leopard 10.5.2 with Dual monitors. ATI Radeon 9800 card AGP on Dual G5 Mac 2.5 MHz
    I can see everything fine on both monitors and can drag windows to both monitors. The only problem is that the mouse disappears on the left monitor. But if I'm good, I can grab windows there and move them (pain in the ***).. I just can't see the mouse !!!!

    Can anyone help me here ?

  • RELEVANCY SCORE 3.41

    DB:3.41:Dual Monitor - Dual Cursor? jc


    I have a dual monitor setup on my G5 and every time the monitors turn off (energy saver setting) and I awake them I get a cursor on each monitor. The weird thing is this - the cursor on the right monitor moves with the mouse, but the one of the left stays stationary - however when the cursor changes to hand (if looking at a web site) then the stationary cursor also becomes a hand. If I move the mouse from the right monitor to the left then the "second" cursor goes away.

    I know that all I need to do is run the mouse across both screens and the problem is solved, but that seems kind of silly and I just wanted to know if this is a common bug in the dual monitor setup or if there is something weird with mine.

    Thanks!

    DB:3.41:Dual Monitor - Dual Cursor? jc

    It happens to me though, Quad with 7800GT

    and the worse thing is,

    everytime I startup or wake up the machine, it turns black, and then turns back to desktop,

    later, it repeats again. Further, It happens much often than before.

  • RELEVANCY SCORE 3.41

    DB:3.41:Windows Server 2008 R2 - Dual Monitor Shows Same Screen 8k


    I have setup dual monitor on Windows Server 2008 R2 machine. The problem is that both the screen shows same screen. I have checked in the Control Panel - Display Settings but it only shows one monitor there. Even detecting monitor (1) shows up on both
    the monitors. I have tried updating the Graphic Card driver and it is running on latest driver.
    Any idea on how to fix the issue so I can have an extended monitor instead of duplicate.
    Thanks,
    Mohammad

    DB:3.41:Windows Server 2008 R2 - Dual Monitor Shows Same Screen 8k

    Hi,

    I agree with Dave. I have experience with dual monitors for Windows Server 2008 and Windows Server 2008 R2, if the display adapter support dual monitors
    and the proper driver has been installed, it should works.

    Best Regards,
    Vincent Hu

  • RELEVANCY SCORE 3.40

    DB:3.40:Dual Monitor Problem pk


  • RELEVANCY SCORE 3.40

    DB:3.40:Dual Monitor Display Setting Changes Automatically mp


    Hi,
    here's my set up:

    Dell M3800 Laptop + Docking station + Dual monitor

    here's my problem:

    I currently set the monitor display as (1) main laptop screen - disconnect from display, (2) Monitor 1 - extend desktop to this display, selected as main display, (3) Monitor 2 - extend desktop to this display.I don't like to use the laptop's screen so I disconnected from display, and using only the two main monitors.Under certain conditions, for example, running the MS powerpoint (2013) slideshow mode, the display automatically changes itself: the main laptop screen gets automatically engaged, and result in tripple monitor set up.
    How do I permanently lock in the set up I like without having to constantly change the display set up?

    Thanks!

    DB:3.40:Dual Monitor Display Setting Changes Automatically mp

    Hi YongCoe,

    Please answer this question to get more clarity on this issue.

    - How did you disconnect the laptop display?

    If possible please post a screen shot of the multiple monitor setup window in your reply. Take a screen shot of that window, paste in paint and save it on the desktop. On the Microsoft Community website when you click reply you will see the option
    “Add Image” at the top most part of the reply window. Click on “Add Image”, browse to the desktop, select the picture and upload it.

    Reply with more information to help you further.

    Thank you.

  • RELEVANCY SCORE 3.40

    DB:3.40:Dual Monitor On Tv? jk


    can you dual monitor a dell tv? i would like to dual vga not dual via one vga and svideo...

    Matt

    DB:3.40:Dual Monitor On Tv? jk

    When you say dual monitor you mean two monitors or Tvs hooked to 1 computer, it can be done depending on the computer's video card

  • RELEVANCY SCORE 3.39

    DB:3.39:Latitude D610 - Need Dual Monitor Help zj



    I am running windows 2000 and need some help with a dual monitor setup. I have one monitor in the VGA port and the other in the DVI port. The problem is that there is no ATI setup utility to help with this. How can I set this up?

    Thank-you,

    Rick

    DB:3.39:Latitude D610 - Need Dual Monitor Help zj


    Win2k does not support dual monitor with that configuration. You need to upgrade to WinXP.

  • RELEVANCY SCORE 3.38

    DB:3.38:Dual Monitor Problem 9d


    I am running windows 7 with Nvidia grahics card. I disconnected my external monitor and applications that were last open on the external monitor won't open on my laptop monitor anymore. How do I bring it back to the laptop monitor?

    Thanks.

    DB:3.38:Dual Monitor Problem 9d

    Hi,
    1) Have you made any changes prior to the issue?
    2) What is the exact error message/code?
    3) What happens when you try to run any application?
    4) Did you try to restart the computer?
    Please turn off the Dual Monitor option to fix this issue.
    For reference:
    Troubleshoot multiple monitor problems
    http://windows.microsoft.com/en-NZ/windows-vista/Troubleshoot-multiple-monitor-problems
    Multiple monitors: frequently asked questions
    http://windows.microsoft.com/en-NZ/windows-vista/Multiple-monitors-frequently-asked-questions
    Also applies to Win 7.
    Provide us with more information to help you better.

  • RELEVANCY SCORE 3.38

    DB:3.38:Dual Link External Monitor Problem c1


    I bought a brand new Dell U2713H monitor (resolution is 2560px wide) so I had to get a dual link adaptor. I plug it into my Macbook pro 17-inch, Late 2011 and it works beautifully for about 10 minutes and suddenly the screen turns to static and i get a dvi symbol on top left. i then turn off and on the monitor and i get another 10 minutes. I was sure it was a faulty dual link cable - but i am trying the monitor on a macbook air and it is working perfectly.any idea what the problem can be? perhaps the AMD Radeon HD 6770M 1024 MB card is not good enough? but i was told by apple support before i bought the monitor it is fine as long as i use the dual link cable.

    DB:3.38:Dual Link External Monitor Problem c1

    restting PRAM did not work. i tried closing laptop and using dell as primary monitor and mirroring the display. in both cases - the screen turns to static after about 10 minutes of working.

  • RELEVANCY SCORE 3.38

    DB:3.38:Dual Monitor With Tablet 93



    I am using dual monitor, my laptop set as primary monitor and an external bigger monitor set as secondary monitor. My problem is regarding my tablet, Huion brand. When using Photoshop alone, the tablet is working perfect with the dual monitor setup. When I use Lightroom, the table scope is being restricted ONLY in the primary monitor and cannot go to the secondary monitor. In Lightroom, the main menus are in the "1st monitor" and what I would normally do is move this "1st monitor" to the bigger external monitor (secondary not the laptop screen) and my problem now is that the tablet cannot follow Lightroom's "1st monitor" as the cursor pointer is limited in the primary monitor (laptop screen). Could this be a driver issue or Lightroom issue? Thanks!

    DB:3.38:Dual Monitor With Tablet 93


    I am using dual monitor, my laptop set as primary monitor and an external bigger monitor set as secondary monitor. My problem is regarding my tablet, Huion brand. When using Photoshop alone, the tablet is working perfect with the dual monitor setup. When I use Lightroom, the table scope is being restricted ONLY in the primary monitor and cannot go to the secondary monitor. In Lightroom, the main menus are in the "1st monitor" and what I would normally do is move this "1st monitor" to the bigger external monitor (secondary not the laptop screen) and my problem now is that the tablet cannot follow Lightroom's "1st monitor" as the cursor pointer is limited in the primary monitor (laptop screen). Could this be a driver issue or Lightroom issue? Thanks!

  • RELEVANCY SCORE 3.38

    DB:3.38:Dual Monitor Video Lag cz


    I have a dual monitor setup that normally works fine except for one specific instance. When I'm trying to play a game in fullscreen mode on my main display and also play a video on my second monitor the video gets horrendous lag. I've researched and
    this seems to be because Windows8 automatically frame rate caps processes running in the background but I can't seem to find a way to fix the problem so I can enjoy both at once.

    DB:3.38:Dual Monitor Video Lag cz

    This is not an issue with the drivers, I've been looking around for a solution for this and have seen lots of people with both nvidia and ati graphics cards, both new and old and they all seem to have the same issue wether or not they have new or old drivers.
    So do I. I've got an ATI Radeon HD 6970 and the latest drivers. I don't have any other issues than this.

  • RELEVANCY SCORE 3.37

    DB:3.37:Saved Dual-Monitor Workspace Always Reloads On One Monitor fj


    I have a two screen setup with a GeForce 8600 dual monitor
    video card. I layout the palettes in Flash CS3 on both monitors
    (designer on the left screen, layers, actions, etc. on the right
    screen) and save the workspace. When I reload the workspace, it
    puts everything on the left monitor. I've never had this problem
    before until now, and I've always worked with dual monitor
    setups.

    DB:3.37:Saved Dual-Monitor Workspace Always Reloads On One Monitor fj

    Hi :)

    I had the same problem a week ago. It may sounds strange but
    the solution for me was not to dock the panels on the second
    monitor. When I dock them for more comfortable workspace and
    restart flash all of them are on the main monitor.

    I hope this will work for you too ;)

    Good luck!

  • RELEVANCY SCORE 3.37

    DB:3.37:Problem With Dual Monitors And Xrandr d8



    Hi,

    Im trying to set up my dual monitors - a 1440x900 laptop monitor and, to the right of that, a 1280x1024 LCD monitor.

    I ran this command:
    xrandr --output VGA --right-of LVDS

    DB:3.37:Problem With Dual Monitors And Xrandr d8


    Thanks,

    But I already set up my xorg.conf for that, and used those commands. It didnt work. My xorg.conf right now, though, doesnt have the changes I made because I reinstalled Arch (reinstalled because I started using Kubuntu and decided I preferred Arch).

    See my orginal Xorg.conf: http://pastebin.com/ff386ad2

  • RELEVANCY SCORE 3.36

    DB:3.36:Dual Monitor, Second Monitor Lags When First Monitor Is In Fullscreen Application j3


    Hey,

    DB:3.36:Dual Monitor, Second Monitor Lags When First Monitor Is In Fullscreen Application j3

    Thank you for keeping us posted and sharing this information with us.

    Feel free to contact the Microsoft Community for any issues pertaining to Windows in the future and we will be happy to help.

  • RELEVANCY SCORE 3.36

    DB:3.36:Sun Ray 2fs Dual Monitor On Srs 3.0/Solaris 8 ms


    Can the Sun Ray 2 FS do dual monitor Windows on Sun Ray Server 3.0 running on Solaris 8? I don't think there is a problem with using Sun Ray 2 devices with any version of SRS, but I wonder if there are limitations to the older versions of SRWC that might complicate dual monitor, or something in the Solaris 8 X libraries. Has anyone tried this?

    DB:3.36:Sun Ray 2fs Dual Monitor On Srs 3.0/Solaris 8 ms

    Can the Sun Ray 2 FS do dual monitor Windows on Sun Ray Server 3.0 running on Solaris 8? I don't think there is a problem with using Sun Ray 2 devices with any version of SRS, but I wonder if there are limitations to the older versions of SRWC that might complicate dual monitor, or something in the Solaris 8 X libraries. Has anyone tried this?

  • RELEVANCY SCORE 3.34

    DB:3.34:Windows 8 Dual Monitor Stuck On Secondary Monitor 7s


    I have a Dell desktop computer and was trying to set up dual monitors. Now it seems dual monitor is set to secondary monitor with only primary monitor hooked up. How do I change back to primary monitor. My only working monitor screen is blank.

    DB:3.34:Windows 8 Dual Monitor Stuck On Secondary Monitor 7s

    read the article and don't see an option for my situation. I don't get anything on the screen and system doesn't automatically go into boot option menu as explained.

    What do you mean by "(E.g. to request Enable low-resolution video mode there.)"?

  • RELEVANCY SCORE 3.34

    DB:3.34:Dual Monitor Configuration pj



    Hi,

    can I connect an external monitor to a VPCL12 all-in-one desktop for dual monitor configuration?

    DB:3.34:Dual Monitor Configuration pj


    Hi lucapepere.

    I don't think this will be possible as there is no video-out or monitor port on this computer.

    It is only possible to output video over a network or via USB. I suppose the idea of an all-in-one PC is that everything is displayed on the main display.

  • RELEVANCY SCORE 3.34

    DB:3.34:Win 7 64bit Dual Montor Problem 9k


    have tow monitors set up on extended in win 7 when i load a game and run it on my primary monitor and then click on the screen on my second monitor in minamizes the primary monitor... is there a way to stop that and be able to do two diffrent things with
    out affect the other???

    DB:3.34:Win 7 64bit Dual Montor Problem 9k

    Unfortunately that is how games work - you can't do anything with the secondary screen without the game being minimized.

    My">
    favorite threads |
    Computer tips
    Contact me |

    'Gadget' programs

  • RELEVANCY SCORE 3.34

    DB:3.34:Dual Monitors Problem 38


    I have an HDMI monitor and a CRT monitor. The CRT monitor goes blank after windows starts. I have updated the drivers also. Does anyone have an idea of what is wrong?

  • RELEVANCY SCORE 3.34

    DB:3.34:Java3d In Dual Monitor sf


    I m facing a strange problem ,actually we are visualizing a 3d cube on a canvas3d ,it runs properly on one monitor but when we use dual monitor and open it in the second monitor it hangs.
    i think it is the problem with java 3D api.because the exception occurs in java3d native code.can u suggest me any solution.and plese tell me also that which java3d Api version is latest that u guys are using.

    DB:3.34:Java3d In Dual Monitor sf

    i think it is the problem with java 3D api.because the exception occurs in java3d native code.

    A lot depends upon your display adapter, driver versions etc. You can search the forum at http://forums.java.net/jive/forum.jspa?forumID=70 for some clues.

    which java3d Api version is latest

    1.4 stable 1.5 pre

    https://java3d.dev.java.net/binary-builds.html

    regards

  • RELEVANCY SCORE 3.34

    DB:3.34:Horizontal Lines On Monitor fm


    I'm back with another monitor problem, another computer. Our old Gateway with Windows 98 was working okay but the monitor had horizontal lines across it. I was given a newish monitor that worked fine as a dual monitor on our new computer. Anyway, thought that the Gateway's monitor was the problem and switched it out with this new monitor. The color is better, yes, but the lines are still there. What does that problem indicate? Is the Gateway about to die?

  • RELEVANCY SCORE 3.33

    DB:3.33:Hx850 Dual Monitors Problem d8


    I've just installed my new HX850 PSU but my second monitor is not displaying.

    DB:3.33:Hx850 Dual Monitors Problem d8

    Let me know if that makes a difference.

  • RELEVANCY SCORE 3.33

    DB:3.33:Imac 27" - Lion - Dual Monitor On 23" Screen, 1920x1080 (Native) Cuts Off/Letterboxes The 2nd Monitor k9


    I have a 27" iMac, with Lion. Dual monitor with a 23" monitor (I used to use it on my pc, 1920x1080 is native) however selecting 1920x1080 for the VGA display on my iMac, it cuts off the screen/letterboxes it on the right hand side. It doesn't do this for any other resoloution. What could the problem be?

    DB:3.33:Imac 27" - Lion - Dual Monitor On 23" Screen, 1920x1080 (Native) Cuts Off/Letterboxes The 2nd Monitor k9

    I have a 27" iMac, with Lion. Dual monitor with a 23" monitor (I used to use it on my pc, 1920x1080 is native) however selecting 1920x1080 for the VGA display on my iMac, it cuts off the screen/letterboxes it on the right hand side. It doesn't do this for any other resoloution. What could the problem be?

  • RELEVANCY SCORE 3.32

    DB:3.32:Pe11 Dual Monitor Problem pk



    I am having big problems moving PE11 workspace anywhere.

    I have 2 monitors and want to move workspace to monitor 2 and keep the timeline on monitor 1.

    If I try to move PE11 workspace anywhere it goes crazy. Lots of graphics lines messed up.

    PE10 still works fine. I can undock and move windows anywhere I want.

    Using Dual monitor workspace works fine on its on, i can keep main workspace on Monitor 1 and Timeline on Monitor 2, which I can live with but would love it to move anywhere problem free.

    Thanks

    Alan

    DB:3.32:Pe11 Dual Monitor Problem pk


    For Intel drivers, I would start here: http://downloadcenter.intel.com/

    I am not really familiar with Intel's download site (unlike nVidia's), so it's all new to me. Historically, the one weakness to the Intel chips is the lack of driver support - they are, however, great chips.

    As Steve points out, a good graphics card from nVidia, or ATI, will not be expensive. Almost any current card, with 1GB of RAM, will be adequate, unless you are into extreme-gaming, or heavy 3D work. The important aspects are:

    One gets dedicated VRAM for the video, rather than a shared segment from the MoBo's RAM.Constantly updated video drivers

    One of the big pluses, regarding drivers, is that even simple OS updates can render a video driver obsolete. That is one reason that nVidia ATI issue them about one/mo. I also like to keep an older driver in a handy folder on my computer, as any video driver release has a slight potential for not working properly with certain programs. As the extreme-gaming industy drives most of the video card and driver RD, each driver released is not fully tested on all other program types. Going back some years now, nVidia added some 3D viewing headset modifications, but those did not play well with some Adobe programs. Lately, ATI/AMD has had two driver releases, that did not play well with Photoshop. It can happen, so I keep a few of the older ones handy, just in case.

    Good luck,

    Hunt

  • RELEVANCY SCORE 3.32

    DB:3.32:Dual Monitor Problem . mm


    Up until a few days ago I have been using my VGA cable with my second monitor with no problem now it doesn't seem to work. When I plug the monitor in. I know there is nothing wrong with the cable itself as I have tried it on another computer. I have also
    tried adjusting display settings and nothing seems to work. Does anyone know any other way of fixing this problem?

    DB:3.32:Dual Monitor Problem . mm

    Up until a few days ago I have been using my VGA cable with my second monitor with no problem now it doesn't seem to work. When I plug the monitor in. I know there is nothing wrong with the cable itself as I have tried it on another computer. I
    have also tried adjusting display settings and nothing seems to work. Does anyone know any other way of fixing this problem?

  • RELEVANCY SCORE 3.32

    DB:3.32:Intermittent Video On Dual Monitor ff



    Am trying to set up dual monitors on Pavilion 6616f with ATI Radeon HD-4200 card which as both VGA and DVI-D connectors. Main monitor is HP2010i connected with VGA cable. Second is Sceptre X9G NagaV connected with DVI-D cable. Catalyst Control Center recognizes both and I can config the monitors okay for Extended Desktop. When I have video signal on 2nd monitor, it works ok. Problem is that video signal on 2nd monitor is intermittent (mostly NO VIDEO).

    DB:3.32:Intermittent Video On Dual Monitor ff


    Check the monitors on another PC if you have access to another. Can you swap the primary and secondary monitors in the CC Panel and see if the problem follows the monitor or stays with the secondary?

  • RELEVANCY SCORE 3.32

    DB:3.32:How Can I Make My Laptop Dual Monitor Capable? 3k


    How can I make my laptop dual monitor capable?

    DB:3.32:How Can I Make My Laptop Dual Monitor Capable? 3k

    If you're looking to hook up two monitors to your laptop, you'll need to provide the computer with another VGA/video out port. The GXT USB to VGA adapter will do this for you easily.



    Ken R.Tanarus Computer Solutions, Orangeville OntarioBeen a fun run, everyone!

  • RELEVANCY SCORE 3.31

    DB:3.31:Nvidia 8600 Gts Dual Monitor Video Problem p9


    DB:3.31:Nvidia 8600 Gts Dual Monitor Video Problem p9

    What's the problem?  What happens when trying to view on the second monitor?

  • RELEVANCY SCORE 3.31

    DB:3.31:Dual Graphics Cards Problem fx


    A MFC visualization application is based on OpenGL. It ran fine at the primiary monitor of a dual graphics cards dual monitors Win XP x64 system. However, the rendered view was never updated when it ran at the secondary monitor. Is there any solution for
    that?

    DB:3.31:Dual Graphics Cards Problem fx

    The original system is an HP 9300 with AMD chip, nVidia Quadro NVS 285 and 295. We suspected that it is hardware releated. We are testing on a HP z600 system with Win 7 pro x64 now. I'll let you know the test results later.dqancestor

  • RELEVANCY SCORE 3.31

    DB:3.31:Windows Wont Allow Same Resolution On Dual Yet Identical Monitors. k8


    Using Nvidia GeForce 250 card with dual Envision monitors. Latest Nvidia drivers for Windows 7 64 bit.
    Monitor 1 shows as 'Generic PNP monitor', while monitor 2 shows as 'Generic Non-PNP Monitor'.

    I can add a resultion to monitor 2 via Nvidia software, but when selected, Windows reverts to previous resolution.

    Monitor 1 sets fine at 1680 x 1050 x 60hz, while monitor 2 only goes to 1600 x 1024 x 60. The monitors are identical.

    This was not a problem in XP, both monitors ( and Windows ) happy at 1680 x 1050 x 60hz.

    Any ideas?

    Can I disable the Windows resolution setting program so that only the Nvidia has control?

    Thank you for any assitance.

    DB:3.31:Windows Wont Allow Same Resolution On Dual Yet Identical Monitors. k8

    A lot of folks on these forums have reported success when using the archived nVidia drivers version 182. You might want to try them.

  • RELEVANCY SCORE 3.31

    DB:3.31:Shifting From Extended Monitor To Duplicate Monitor Causes Office Aplications To Recover The Working File. f3


    WIN8.1 on a surface pro, dual monitors.
    office applications shutdown when shifting from extended monitor mode to duplicate mode. Results in the application having to recover the original file. Is this a driver problem?

    DB:3.31:Shifting From Extended Monitor To Duplicate Monitor Causes Office Aplications To Recover The Working File. f3

    Hi,
    Anyhow, it's better to update the drivers .
    Have you tried any other applications?
    If it just happened on office applications,there will be an error or warning generated at the Event log, which will explain the cause, so, please post the error log for further
    support.
    Here is the method to get the event error:
    http://windows.microsoft.com/en-us/windows/open-event-viewer#1TC=windows-7

    then select the Application events, there select the one related to office application.

    Regards

    v-yamliu

  • RELEVANCY SCORE 3.31

    DB:3.31:Dual Monitor Linux Guest Problem c1


    I am running Workstation 6.03 on a windows xp x64 host. I have a linux guest (kubuntu) up and running and normally can get dual monitors working. However, if I go from the dual monitor setup on the guest and restore the window to "normal" I cannot get the guest to go back to dual monitor mode without rebooting my entire host system. Does anyone know a work around for this?

    Thanks

    DB:3.31:Dual Monitor Linux Guest Problem c1

    I am running Workstation 6.03 on a windows xp x64 host. I have a linux guest (kubuntu) up and running and normally can get dual monitors working. However, if I go from the dual monitor setup on the guest and restore the window to "normal" I cannot get the guest to go back to dual monitor mode without rebooting my entire host system. Does anyone know a work around for this?

    Thanks

  • RELEVANCY SCORE 3.30

    DB:3.30:Hp 500-214 Dual Monitor Support For Amd A8 6500 Apu pd



    Does this support dual monitors via DVi +VGA or DVI + HDMI ......?

    If not then it looks like the mainboard supports pci2.0x16, will there be any problem disabling onboard video if i add a card? Not familiar witht he new UEFI, not sure i like it.

    DB:3.30:Hp 500-214 Dual Monitor Support For Amd A8 6500 Apu pd


    Your system comes with 1 PCI Express x16 (Gen2.0). You can install a video card meeting these specifications. I do not see any issues installing a new video card. Also UEFI is a good feature which will not stop you in this process.

    Link to the specifications of your system:

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04100368cc=usdlc=enlc=enproduct=6529629#N90

    For more information on UEFI:

    HP PCs and Tablets - About UEFI and the Startup Menu

  • RELEVANCY SCORE 3.30

    DB:3.30:M58p 7220 Dual Monitor Setup Problem c3


    I am having trouble getting dual monitor setup to work on a M58p 7220 AK8. I have two vga flat panel monitors. I have a DisplayPort to VGA dongle on the Display port and a monitor connected, as well as a monitor connected to the VGA port. When I boot, both screens remain black, and indictae no signal. A single monitor plugged into the VGA port works fine at boot. A single monitor plugged to the display port remains black at boot.I went to BIOS setup, Devices, Video Setup and set the graphics to use the integrated hardware. Other than that, there is no selections to enable/disable the displayport or to set the displayport as primary or secondary.What am I doing wrong?







    Solved!
    Go to Solution.

    DB:3.30:M58p 7220 Dual Monitor Setup Problem c3

    Ok, figured it out.....with the setup described above, when the machine is powered on, the POST test and bios boot logo does not show up for about 30+ seconds....!?!?!?1? When it does, it shows up on the VGA port connected montior. It is not until windows' boots that the displayport monitor comes on and becomes the primary display. weird.

  • RELEVANCY SCORE 3.30

    DB:3.30:Xps710 H2c, Dual 8800gtx - Dual Monitor How To s3


    DB:3.30:Xps710 H2c, Dual 8800gtx - Dual Monitor How To s3

    http://www.dellcommunity.com/supportforums/board/message?board.id=xps_desk_videomessage.id=9147query.id=166133#M9147

  • RELEVANCY SCORE 3.30

    DB:3.30:Dual Monitor Position Issue za


    I have the same problem as well... IBM Thinkpad with an external Samsung monitor. I place the Samsung to the left... but each reboot or return from hibernate causes Windows 7 to reset the Samsung to be logically on the right (although it is physically, of
    course, still on the left).

    Windows 7, Ultimate, 64-bit, SP2, build 6002

    DB:3.30:Dual Monitor Position Issue za


    I have the same problem as well... IBM Thinkpad with an external Samsung monitor. I place the Samsung to the left... but each reboot or return from hibernate causes Windows 7 to reset the Samsung to be logically on the right (although it is physically, of
    course, still on the left).

    Windows 7, Ultimate, 64-bit, SP2, build 6002

    Hi
    Could you please check the build information for the operating system again.
    "Windows 7, Ultimate, 64-bit, SP2, build 6002"
    Windows 7 should show no service packs and Build 7600.
    Click Start and type winver in the Search box and press enter to see the information.
    Regards,

    Ronnie Vernon MVP – Windows Desktop Experience

  • RELEVANCY SCORE 3.30

    DB:3.30:Xfce + Dual Monitor Setup Question 99



    Hi,

    I just used the wiki guides to install arch and xfce, the desktop is extended horizontally on my 2 monitors, I used aticonfig.the problem is if I start a an application in 1 monitor I cannot drag it to the 2nd monitor, how do I achieve that?

    thx.

    DB:3.30:Xfce + Dual Monitor Setup Question 99


    @pinkfish, re etiquette, dont worry too much about it. Ive seen worse and at least youre willing to take advice and a bit of constructive criticism. Some people I have seen on forums immediately fire a shot over the bow, to use a naval phrase, thinking they need to defend themselves from other forum citizens.

    I meant to ask, are you trying to get one big desktop then or a true dual monitor (separate x-session) situation? You might want to try one then the other. I know when I had an ATI card I found it difficult, if not impossible, to get dual monitors working properly yet the big desktop option did work on most systems.

  • RELEVANCY SCORE 3.30

    DB:3.30:Controltiptext Tooltip On A Dual Monitor System 1p


    I have a dual monitor system with Win7 and a NVidia graphic card. If I open a simple userform

    Private Sub UserForm_Initialize()
    With Me.Controls.Add("Forms.Label.1")
    .Caption = "Label1"
    .ControlTipText = "Just an example"
    End With
    End Sub

    and move it to the primary monitor, the tooltip is shown correctly.

    If I move it to the second monitor, the tooltip of the label if shown at the right edge of the primary monitor.

    But if I move the mouse over the close cross, this tooltip is shown correctly on the second monitor.

    So I think this is not a problem with the graphic card driver, is this a BUG in the FM20.DLL?

    Andreas.

    DB:3.30:Controltiptext Tooltip On A Dual Monitor System 1p

    I have a dual monitor system with Win7 and a NVidia graphic card. If I open a simple userform

    Private Sub UserForm_Initialize()
    With Me.Controls.Add("Forms.Label.1")
    .Caption = "Label1"
    .ControlTipText = "Just an example"
    End With
    End Sub

    and move it to the primary monitor, the tooltip is shown correctly.

    If I move it to the second monitor, the tooltip of the label if shown at the right edge of the primary monitor.

    But if I move the mouse over the close cross, this tooltip is shown correctly on the second monitor.

    So I think this is not a problem with the graphic card driver, is this a BUG in the FM20.DLL?

    Andreas.

  • RELEVANCY SCORE 3.30

    DB:3.30:Dual Monitor Imac? 9m


    With the latest iMacs, how would one connect a 2nd monitor, for say dual monitor editing?

    DB:3.30:Dual Monitor Imac? 9m

    Cube Over is correct if you want to use a third party display, however if you want to use one of the new Apple Thunderbolt Display you can connect via Thunderbolt. The advantage of that is you can also daisy chain other Thunderbolt devices to some extent. If you are interested in the display click:http://www.apple.com/displays/If you would like to read about daisy chain capabilities please look over:http://support.apple.com/kb/HT4885orhttp://www.tuaw.com/2011/09/18/thunderbolt-display-daisy-chaining-spec-cleared-u p/

  • RELEVANCY SCORE 3.30

    DB:3.30:Dual Monitor On Imac Via Mini-Dp To Dvi kf


    I have an iMac mid-2011 and I'm trying to have a dual display with my new Samsung S22B310 monitor. I somehow can't figure out how it should work. I've done a lot of research and made a PRAM reset but still, no luck. I have this though, but the second monitor is just in black and no display on it:The monitor is detected and somehow my cursor seems to extend on the other end. The only problem is there is no display on the monitor but it works totally fine when connected to another laptop as an extension too.

    DB:3.30:Dual Monitor On Imac Via Mini-Dp To Dvi kf

    Please carefully read How to use multiple displays with your Mac

  • RELEVANCY SCORE 3.29

    DB:3.29:Dual Monitor On Mac Mini sd


    Which model can I have dual monitors set up?

    Thanks

    DB:3.29:Dual Monitor On Mac Mini sd

    If you are talking about the mac mini or iMac no. Some of the G4 desktops do depending on what video card is installed.

    Glor

  • RELEVANCY SCORE 3.29

    DB:3.29:T43 Dual Monitor km


    Hello,I was wonderig if my T43 is capable of handling dual monitor. Can someone help with this?1875DMUThanks,RP

    DB:3.29:T43 Dual Monitor km

    Yes that's what I was fearing as well the quality might not be good. I will give it a shot.Thanks for your help.RP

  • RELEVANCY SCORE 3.29

    DB:3.29:Macbook5,1 Connected With Dell3007wfphc 30" Monitor s9


    Hello.
    MacBook5,1 connected with DELL3007WFPHC 30" Monitor dual monitor mode.

    I seem to have a problem with my resolution on that monitor, I can not get it higher than 1280X800 for some reason, and if i connect the MacBook to a Samsung Syncmaster 22" monitor i can get it to the monitor's full resolution, did anyone else had this problem? was there a solution?

    thank you!

    DB:3.29:Macbook5,1 Connected With Dell3007wfphc 30" Monitor s9

    Thank you for the response, it looks like the only solution and according to the reviews, it's not a great one.

    again, thank you.

    Sandro.

  • RELEVANCY SCORE 3.29

    DB:3.29:Hiding Remote Desktop On Dual Monitor Systems Has Problems? 13


    Got my Mesh invite, got it installed on machines that are side by side, and quickly ran into my first problem. I remote connected to a dual monitor system from a different dual monitor. Got the squished desktop effect in the browser, but the show full-size option worked well.However, I told the system to hide the remote desktop, and only one screen on the dual monitor went blank. Interestingly, when I disconnected and signed back in at that machine, the monitor that went blank was disabled, and I had to re-enable it and make it part of my Windows desktop.Oddball thing about that particular dual monitor setup: screen 2 is to the LEFT of screen 1, so screen 2 starts at -1280, and screen 1 starts at 0. Don't know if that's important or relevant.

    DB:3.29:Hiding Remote Desktop On Dual Monitor Systems Has Problems? 13

    Hi,We do have a known issue with one monitor being disabled after a Live Mesh Remote Desktop session, as you describe.  For your other issue, would you mind filing a bug report?
    Bug submit process:
    Please go to http://connect.microsoft.com/. Sign in and then select Live Mesh Tech Preview on Your Dashboard.  Click Feedback and follow the instructions for collecting your logs and then submit a bug.To get your logs:1.  Click Start.2.  Select All Programs and look for the Live Mesh folder.3.  Click Collect Live Mesh Logs.4.  Your logs will be bundled together in a cab file now located on your desktop.Attach your LiveMeshLogs.cab file located on your desktop to your bug.
    Note: you will have to submit a bug first, then edit it to attach your logs.Thanks,Ben.

  • RELEVANCY SCORE 3.29

    DB:3.29:Dual Monitor Problems d9


    My primary monitor is a 21" cintiq and my secondary is a 19" crt. I have it set on DualView with the cintiq as the primary and the resolution is 1600x1200. This is making my cintiq have about a 1 inch offset on any sculpting operation. Is there any way to fix this problem?(preferably without disabling my second monitor)Cheers, Frank

    DB:3.29:Dual Monitor Problems d9

    My primary monitor is a 21" cintiq and my secondary is a 19" crt. I have it set on DualView with the cintiq as the primary and the resolution is 1600x1200. This is making my cintiq have about a 1 inch offset on any sculpting operation. Is there any way to fix this problem?(preferably without disabling my second monitor)Cheers, Frank

  • RELEVANCY SCORE 3.29

    DB:3.29:3007wfp Cause Blue Screen In Dual Monitor Configuration 9m


    Has anyone else solved this problem?

  • RELEVANCY SCORE 3.29

    DB:3.29:Windows 8.1 Extend Dual Monitor And Resolution Issue After Update 1d


    Anyone experiencing this problem when they extend their monitor to multiple monitors?

    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/screen-resolution-issue-after-windows-81-upgrade/d5ab5ee7-d18c-478c-b891-33d49bd04db5

    DB:3.29:Windows 8.1 Extend Dual Monitor And Resolution Issue After Update 1d

    Yes I have the same problem. it just did it to me when I turned my PC on today on the 12th of February. it made my second monitor my primary, and wont allow me to change that. it also made my previously primary, now secondary monitor drop to 1024 * 768
    resolution and wont allow me to change it back to 1080p. ive tried everything from updating windows and updating all drivers. nothing. tried unplugging and moving the positions of where they are plugged in and tried powering down and back on the PC with different
    placements. tried using the BIOS to change monitor resolution but it wont allow me to. my secondary monitor that is now the primary, has however changed to 1080p which it wasn't before. its almost as if the monitors change position AND resolution and ive used
    every available option to try and revert it short of wiping my PC. (ive also tried uninstalling and re downloading all drivers)

  • RELEVANCY SCORE 3.28

    DB:3.28:Maya 2011 Dual Monitor Problem 3s


    Hi,I am running Maya 2011 off a laptop with an Invidia GT 330 graphics card. I am using the Education Suite. I recently installed a second monitor. Maya itself works fine, however, when I disconnect the 2nd monitor and just work off the laptop the Maya interface still seems to "exist" somewhere in the second monitor space. So I can't actually see the Maya interface even though it is running. My laptop shows only one monitor active (the default laptop monitor).None of the other applications (Mudbox, Max) do this. If I disconnect the second monitor they run properly off of the laptop (which is designated as the primary monitor). Also, Maya 2009 doesn't do this either. It only seems to affect Maya 2011. Any ideas?Thanks!Steve

    DB:3.28:Maya 2011 Dual Monitor Problem 3s

    Hi,I am running Maya 2011 off a laptop with an Invidia GT 330 graphics card. I am using the Education Suite. I recently installed a second monitor. Maya itself works fine, however, when I disconnect the 2nd monitor and just work off the laptop the Maya interface still seems to "exist" somewhere in the second monitor space. So I can't actually see the Maya interface even though it is running. My laptop shows only one monitor active (the default laptop monitor).None of the other applications (Mudbox, Max) do this. If I disconnect the second monitor they run properly off of the laptop (which is designated as the primary monitor). Also, Maya 2009 doesn't do this either. It only seems to affect Maya 2011. Any ideas?Thanks!Steve

  • RELEVANCY SCORE 3.28

    DB:3.28:Flickering Widescreen Monitor On Dual Monitor Setup. k3


    I'm using a nvidia quadro 4000 on windows 7 64bit with two monitors, one widescreen and one regular one. The widescreen monitor occasionally flickers on and off but the power light remains on. I've tried adjusting the refresh rates and have even swapped
    monitors, cables, and power cords. Is there anything else I can try short of replacing the video card? It's new, as is the computer, so I doubt that's the problem.

    DB:3.28:Flickering Widescreen Monitor On Dual Monitor Setup. k3

    I'm using a nvidia quadro 4000 on windows 7 64bit with two monitors, one widescreen and one "regular" one. The widescreen monitor occasionally flickers on and off but the power light remains on. I've tried adjusting the refresh rates and have even
    swapped monitors, cables, and power cords. Is there anything else I can try short of replacing the video card? It's new, as is the computer, so I doubt that's the problem.

    When you swap monitors cables does the same monitor or the monitor connected to the same port give the same behaviour? ie is it specific to a single port or monitor?

  • RELEVANCY SCORE 3.28

    DB:3.28:To Connect Dual Monitors 79



    I face the problem that myself unable to connect my laptop to an external monitor(i want use dual monitor way,simultaneously using both monitors). I tried my level best with all means,please help me in this regard.

    My HP Laptop Model is 15-d009TU

    Product : F6D30PA#ACJ

    DB:3.28:To Connect Dual Monitors 79


    I did not get yet solution yet,some say it is the drivers problem. Is it correct! Even i tried to download display drivers that also failed!

    Is it really require that for external connection drivers!!

  • RELEVANCY SCORE 3.27

    DB:3.27:Studio 17 Has Dual Monitor Support Problem. 9a



    This is my problem report. Whenever I plug in second monitor,  system just goes crash 1 -2 times per hour.

    I have to use dual monitor all the time, please help me. 

     

    DB:3.27:Studio 17 Has Dual Monitor Support Problem. 9a


    Have you tried installing the new Dell ATI Catalyst drivers for the Studio 1535 and 1735.  They add a few more missing display resolutions and improve dual external monitor support.  It also fixes all but one of the scaling errors (1920 x 1080) between 1280 x 1024 and 1920 x 1200. It should work for all version of Vista.

     

    Studio ATI Drivers

     

     

  • RELEVANCY SCORE 3.27

    DB:3.27:Win7 Home Premium Problem With Dual Monitor. Help Please 1c


    I upgraded from Vista to Win7 Home Premium on my laptop and can't attach dual monitor due to the option is not available in Display/Screen Solution. It only shows Screen 1 and as I understand the dual option is suppose to come with Home Premium but not
    the Win7 Starter. Does anyone have the solution to the problem? Please!

    DB:3.27:Win7 Home Premium Problem With Dual Monitor. Help Please 1c

    Hi,

    How to Setup Dual Monitors in Windows 7
    http://www.online-tech-tips.com/windows-7/how-to-setup-dual-monitors-in-windows-7/

    Two monitors are better than one
    http://www.microsoft.com/athome/organization/twomonitors.aspx

    Work and play better with multiple monitors
    http://windows.microsoft.com/en-us/windows7/work-and-play-better-with-multiple-monitors

    Move windows between multiple monitors
    http://windows.microsoft.com/en-US/windows7/Move-windows-between-multiple-monitors

    Tutorial: How to Set Up Dual Monitors (Windows) - a Video
    http://www.youtube.com/watch?v=YFCpaAs5s3c

    How to Set Up Multiple Monitors
    http://www.pcworld.com/article/157672/how_to_set_up_multiple_monitors.html

    ==================================

    Dell Support
    http://support.dell.com/

    Dell Drivers - Product Manuals WarrantyInfo(left side) - Tech Support and more
    http://support.dell.com/support/index.aspx?c=usl=ens=dhs

    Dell Forums
    http://en.community.dell.com/forums/

    Nvidia - Drivers - Use OPTION 1to manually enter your driver info toget most current drivers.
    http://www.nvidia.com/Download/index.aspx?lang=en-us

    Nvidia Support - check with Support as it could be a known issue
    http://www.nvidia.com/page/support.html

    Nvidia Forums - also check for forums as it could be a known issue and/or others likely to have it
    http://forums.nvidia.com/

    Youneed to update your display/video driver - get the latest at Dell 1st and then check for newer
    at Nvidia.

    This ismy generic how to for proper driver updates :

    This utility makes it easy to see which versions are loaded :

    DriverView - Free -utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,
    version, product name, company that created the driver, and more.
    http://www.nirsoft.net/utils/driverview.html

    For Drivers check System Maker as fallbacks and Device Maker's which are the most current.
    Control Panel - Device Manager - Display Adapter - write down the make and complete model of your
    video adapter - double click - Driver's tab - write down the version info. Now click UPdate Driver (this
    may not do anything as MS is far behind certifying drivers) - then Right Click - Uninstall - REBOOT
    this will refresh the driver stack.

    Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party with their
    own software and drivers and any other major device drivers you have.

    Now go to System Maker's site (Dell, HP, Toshiba as examples)(as rollback) and then Device Maker's site
    (Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for BIOS, Chipsetand software
    updates at System Maker's site while there.)

    Download - SAVE - go to where you put them- Right Click - RUN AD ADMIN - REBOOT after each installation.

    Always check in Device Manager - Drivers tab to be sure the version you are installing actually shows up. This
    is because some drivers rollback before the latest is installed (sound drivers particularly do this) so install a
    driver - reboot - check to be sure it is installed and repeat as needed.

    Repeat at Device Makers - BTW atDeviceMakers DO NOT RUN THEIR SCANNER - check manually by model.

    Manually look at manufacturer's sites for drivers - and Device Maker's sites.
    http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm
    How to Install a Device Driver in Vista Device Manager
    http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html

    If you update drivers manually then it is a good idea to disable Driver Installations in Windows Updates,
    this leaves Windows Updates ON however it will not install drivers which will usually be older and cause
    issues. If Updates suggests a new driver then HIDE it (Right Click on it) and then go look for new ones
    manually if you wish.

    Stop Windows 7 from Automatically Installing Device Drivers
    http://helpdeskgeek.com/windows-7/stop-windows-7-from-automatically-installing-device-drivers/

    How To Disable Automatic Driver Installation In Windows 7 / Vista
    http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/

    Disable Windows Update Device Driver Search Prompt In Windows 7 / Vista (for Professional,
    Ultimate, and Enterprise)
    http://www.addictivetips.com/windows-tips/disable-windows-update-device-driver-search-prompt/

    Hope this helps.

    Rob Brown -
    Microsoft MVP - profile - Windows Expert - Consumer : Bicycle - Mark Twain said it right.

  • RELEVANCY SCORE 3.27

    DB:3.27:X Thinks My Dual Monitors Are Just One Monitor fc



    I am using the Experimental Nvidia Optimus support in the nvidia driver (closed source), How can I fix this problem

    One Monitor is connected via HDMI (output through nvidia) and Second monitor is connected via VGA (output through intel)

    DB:3.27:X Thinks My Dual Monitors Are Just One Monitor fc


    Take a look at these bumblebee:https://github.com/Bumblebee-Project/Bu … itor-setupor:https://wiki.archlinux.org/index.php/NV … e_monitors

    Also monitor this thread: https://bbs.archlinux.org/viewtopic.php?id=175916

  • RELEVANCY SCORE 3.27

    DB:3.27:Enhanced Usb Port Replicator 43r8811 And Dual Monitor dm


    I have problem with USB port replicator. I cannot put a right resolution to monitor (wide screen monitor). Replicator's settings say that I can use up to 1280x1024 resolutionbut monitor support i.e. 1400x1050 resolution which port replicator should support by user manual.If I put monitor direct to my X300 laptop I can use monitor's right resolution (1680x1050).Is it drivers problem or what that I cannot put a right settings?-Paul-

    DB:3.27:Enhanced Usb Port Replicator 43r8811 And Dual Monitor dm

    Hi,Im also having a similar problem with the display. Have recently bought 2 Enhanced USB port replicator connected toSL300. However Im using DELL 19" wide screen. Whenever the users unplug the replicator and plug it again the next morning it wont display to the external screen. Even when we setup the dual display settings it wont work. Sometimes we have to restart and it picks up.Hope someone helps

  • RELEVANCY SCORE 3.27

    DB:3.27:Dual Monitor In Fusion 3.1 ?? a8



    Just wondering if dual monitor is supported ??

    DB:3.27:Dual Monitor In Fusion 3.1 ?? a8


    It is. Using it right now with a XP Pro guest.

  • RELEVANCY SCORE 3.27

    DB:3.27:Dual Monitor Problems In Windows 8 3s


    My dual monitors worked in Windows 7 without any problem. However, after upgrading to Windows 8, I can only duplicate the display or show it on one monitor at a time. It will not extend the display. When I select extend the display the primary monitor
    continuously blinks on and off, and the secondary monitor goes into sleep mode. All of my drivers are updated. Please advise.

    DB:3.27:Dual Monitor Problems In Windows 8 3s

    I have no idea how it got resolved, but the dual monitor feature is now working - beautifully. Crtl-Esc, Dual monitor

  • RELEVANCY SCORE 3.27

    DB:3.27:Windows 7 And Dual Monitor Output xp



    I have a Pavillion dv4272 and installed Windows 7. Now my dual monitor output no longer works. I've seen posts that suggest the problem is an out of date BIOS. Can BIOS F.03 be updated?

    DB:3.27:Windows 7 And Dual Monitor Output xp


    I have a Pavillion dv4272 and installed Windows 7. Now my dual monitor output no longer works. I've seen posts that suggest the problem is an out of date BIOS. Can BIOS F.03 be updated?

  • RELEVANCY SCORE 3.27

    DB:3.27:Dual Monitor Display Problem k9


    I have an issue with a setup of dual monitors
    I open up a program on one screen and it jumps from one screen to the other. Back and forth back and forth I dont know if its because of the dual display adapter or what

    DB:3.27:Dual Monitor Display Problem k9

    I just reinstalled the software and took of the keyboard shortcuts were making it jump from one side to the other .... its fixed thank you