• RELEVANCY SCORE 3.72

    DB:3.72:Question About Dwcc For Those Who Have Used The Fluid Grid pp





    Hi,

    I am considering getting the DWCC subscription because my CS6 version does not support nested divs and requires an id on every new div and no way to include a class instead.

    I am currently using the free DMXzone twitter extension to build a responsive site. Seems to work ok, but doesn't design with html5. It does supports all the above.

    So, I'm looking for some feedback from those who have used Cc and have used dmxzone.

    DMXzone has a new bootstrap 3 extension for sale, so I'm wondering if I should get that instead.

    Only thing about bootstrap, there is a whole lot of css code included by default, I don't even use. Code bloat in my opinion. Not so much with DWCS6 fluid grid.

    Thanks

    DB:3.72:Question About Dwcc For Those Who Have Used The Fluid Grid pp


    Hello all,

    just to let you know, the problem is caused by bad code in webassist extensions, which breaks the installation process of our extensions.

    They promised to update their extensions and are going to release some hotfixes: http://www.webassist.com/forums/posts.php?id=33955

  • RELEVANCY SCORE 2.74

    DB:2.74:After Dreamweaver File Is Complete, How Can The File Be Used In A Html Email? zd





    I have created a DWCC 2014 file in which it would need to be sent and viewed as a working html email. How would it be created and put to use?

    DB:2.74:After Dreamweaver File Is Complete, How Can The File Be Used In A Html Email? zd


    Hi Rich -

    You'll find this set of tools invaluable:

    http://templates.mailchimp.com/resources/

  • RELEVANCY SCORE 2.74

    DB:2.74:Limited List Of Workspace Fonts? cs





    Just downloaded OS X DWCC and was trying to customize my workspaces when I noticed that I'm only getting 8 fonts listed for proportional, fixed code view?

    I'm sure this isn't right - Have tried all the usual suspects, deleting app data, preferences, etc, but no resolution.

    Any ideas? Screen attached.

    DB:2.74:Limited List Of Workspace Fonts? cs


    Hi antmeeks13,

    This document is for PS but should hold good for other products as well, I think -- just in case you haven't tried some of these out.

    http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

    Thanks,

    Preran

  • RELEVANCY SCORE 2.71

    DB:2.71:Widget Browser Discontinued? jm



    So now Adobe has discontinued the Widget Browser? So you can't even browse the exchange anymore unless you "upgrade" to DWCC?

    What a blatant ripp-off. I have truly had it with the direction they're taking Dw development...

    DB:2.71:Widget Browser Discontinued? jm


    Widget Browser is gone for everyone. The Widgets themselves hadn't been updated in a very long time. I wouldn't use them. jQuery is still your best option.

    Nancy O.

  • RELEVANCY SCORE 2.68

    DB:2.68:Question About "Pending" Charges... zs



    I see my account has some pending charges -- and they have been "pending" fo a few days already.Question is, are those charges already taken from my balance? Or do I have to anticipate those charges being taken out of my balance when they actually "post?"I looked, and it SEEMS like those charges have already been taken out of my balance -- but I just want to be SURE of that!!Please advise!Thanks!-- TimothyW

    DB:2.68:Question About "Pending" Charges... zs


    I see my account has some pending charges -- and they have been "pending" fo a few days already.Question is, are those charges already taken from my balance? Or do I have to anticipate those charges being taken out of my balance when they actually "post?"I looked, and it SEEMS like those charges have already been taken out of my balance -- but I just want to be SURE of that!!Please advise!Thanks!-- TimothyW

  • RELEVANCY SCORE 2.58

    DB:2.58:Online Handle And Forum Name Question 81


    Hi there.

    Question to those with a PS3...

    What is the relationship between the online handle we're creating and the online name we have on here?

    Does the forum name stop being used or are they always kept seperate?

    Cheers

    Andrew

  • RELEVANCY SCORE 2.56

    DB:2.56:Question For Those Who Have Replaced Phone d9


    If you have to replace a phone at the Apple store (as i may) do you have to go through the whole activation process again??
    How about Re- Syncing?

    DB:2.56:Question For Those Who Have Replaced Phone d9

    The ATT rep told me if you're charged a second activation fee to call and have it refunded. I swapped phones, the Apple Store swapped SIM cards so I had the original card, and pretty much everything was there but my password for the phone. Unfortunately, the new one didn't work and better than the old one.

  • RELEVANCY SCORE 2.50

    DB:2.50:All My Sites Are Gone! j8



    I went to update one of my sites this morning and all my sites are missing in my files window and they don't show up in my Manage Site window either. The sites are all still on my hard drive so I know they are there and they show up in DWCS6 too. But not in DWCC. I reloaded one of my sites because I had work to get done. Before I load them all back in I wanted to check to see if anyone had expert advice on what I should do next.

    I tried calling in to Adobe but not support on weekends and Chat didn't have anyone who knew anything about Dreamweaver. I don't want to get off on a rant but for $50 a month for Creative Cloud shouldn't they have 27/7 support? But that's another subject I guess...

    But I would appreciate help on the problem at hand. Thanks!

    DB:2.50:All My Sites Are Gone! j8


    Ok... I did the second restore procedure. However, doing that wiped all my extensions that I had installed. Luckily my genius son came by and restored them for me through a mac backup I did a couple days ago. He got it all up and running for me. Thanks for your help but you might want to make it clear that the restore function will delete your extensions. I had asked that specifically in a couple posts ago. Again, I do appreciate your help but I think the point of these forums is to learn for experiences. Thanks again!

  • RELEVANCY SCORE 2.48

    DB:2.48:Restore Question - From Ntfs To Vmfs [ Backup Used Vcb ] ms


    Hi,

    I have successfully backed up some vm's using VCB to a NTFS partition via a physical machine proxy server.

    I am going to now archive those exact files folders using Veritas 12D to tape.

    My question is:

    What good does this do? How might I actually benefit ?

    This is how I think, do you agree?

    If I were to create a new esx server, create a new Iscsi Lun for a VMFS datastore, how would I go about copying the exact restored TAPE files from a NTFS partition to a newly created VMFS(lun)?

    Do I just use a standard Veam application to move those files into VMFS? Then I create a new virtual machine but tell it to use an existing file and point to one of those new freshly copied over VM's files[vdmk]??

    Thanks!

    DB:2.48:Restore Question - From Ntfs To Vmfs [ Backup Used Vcb ] ms

    Ok so it doesn't matter where the converter is installed, it could be an xp, win2003 server and as long as it has access to VC and the restored files then I am set.

    Great thank you.

  • RELEVANCY SCORE 2.47

    DB:2.47:Easy Question About Forums 17


    I have noticed that many people insert links. Those links are renamed.

    How do you rename a link?

    Thanks

    nathan.

    DB:2.47:Easy Question About Forums 17

    Hi Nathan!

    Here's another one you may find useful Tip: How to post a link (URL) in "Apple Discussions".

    Have Fun!

    ali b

  • RELEVANCY SCORE 2.45

    DB:2.45:Hardened Question? fk


    For those of us who have the hardened edition, will we still get our Founder status? It says on my little founder card thing expires 8-11-11. Now when I enter the elite code in it says invalid or may have been used. I'm guessing the servers are busy. I'm just curious about the founder bit! What u guys think?



  • RELEVANCY SCORE 2.44

    DB:2.44:Just Curious About Invite a1


    Here is one question for you guys.

    To those you have got Invite, how long does usually took after you started to share info at Forum. 1week?

    Thanks~

    DB:2.44:Just Curious About Invite a1

    Levels and points do not affect your chances of system rollout invites. Closing thread.

  • RELEVANCY SCORE 2.43

    DB:2.43:Spanning-Tree Backbonefast + Rapid-Pvst+ On Catos 3d



    Dear all,

    I have a question about my 6500 CatOS, so those both 6500 Catos are used to connect all my Servers to them, those two 6500 they have redundant Link to our two core switch with layer 2 and 3 switches.

    My question is we have backbonefast enabled on both those 6500 Switches running CatOS, so Cisco advise that we have to disable backbonefast before migrating to RPVST, what is the impact to disable this feature on my switches running currently PVST+?

    Thanks for your answer and suggestions.

    DB:2.43:Spanning-Tree Backbonefast + Rapid-Pvst+ On Catos 3d


    Yes here the message you got if you dont disable backbonefast

    before migration:

    CatOS does not allow you to change the mode to rapid-PVST if the BackboneFast feature is enabled. You have to disable BackboneFast before the migration. UplinkFast acts as same as it behaves in IOS.

    Access2 (enable) set spantree mode rapid-pvst+Cannot change the spantree mode to RAPID-PVST+ when backbonefast is enabled.

    So I must disable it before go to RPVST, and how about IOS? do you know the impact? to disable it because our backbone is two cat6500 IOS, the two other cat6500 CatOS are only used to connect Servers.

    Thanks

  • RELEVANCY SCORE 2.42

    DB:2.42:Naive Question About Stl Library pz



    Hello, I have a naive question about STL library. I'm currently using ICC 12.1 above MSVS2010. I saw that the STL headers used during debugging are those coming with Visual Studio. I looked at the ICC folder and found no SLT-like header files.My question is: since ICC can be used standalone and STL are part of C++, how all of this is performed when Visual Studio is not installed? Maybe my question makes no sense?Dominique

  • RELEVANCY SCORE 2.42

    DB:2.42:Quick Question About Hiding Photo's And Albums fx


    Good morning all, quick question, I have an event that I have hidden, but I want ten of those pictures to be in an album and visible, is the only way to do that to unhide those ten pictures? I want those on my iPhone next time I synch. Thanks for your help!

  • RELEVANCY SCORE 2.42

    DB:2.42:Some Question About Ril Api zj


     
    i am a OEM engineer who works on application category.
     
    i want to use tapi and ril api write a telephony programm. 
     
    i have some question about RIL API like
     
    under list:
     
    RIL_Dial
     
    RIL_Answer
     
    RIL_Hangup
     
    RIL_SendDTMF
     
    RIL_SetDTMFMonitoring
     
    RIL_GetCallList
     
    RIL_ManageCalls
     
    those API can be used on VS2005 or just used on another platform..
     
    those API is belong to RIL Proxy or RIL Driver??
     
    because i can't use on VS2005
     
    so...I hope get answer and some example.
     
    thank you

    DB:2.42:Some Question About Ril Api zj

    Hi,probably you take a look at this post as well.Cheers, Peter

  • RELEVANCY SCORE 2.42

    DB:2.42:Question About Hd Receiver cx


    I have read about buying a used receiver but still have a question. What about buying a receiver that still has a factory sealed access card?

    DB:2.42:Question About Hd Receiver cx

    I have read about buying a used receiver but still have a question. What about buying a receiver that still has a factory sealed access card?

  • RELEVANCY SCORE 2.42

    DB:2.42:Trouble Uninstalling Dwcs6 And Installing Dwcc 3p



    Can not uninstall DWCS6 from Windows 7 64 bit system. I tried the WIN cleaner without success.I am doing this so that I can install DWCC attempting to get it to function. Once DWCC is installed it will not execute and gives me an Entry Point Not Found dialogue box: X The procedure entry point AMTRetrievePersonGUIDWithAuthSource could not be found in the dynamic link library amtlib.dll

    DB:2.42:Trouble Uninstalling Dwcs6 And Installing Dwcc 3p


    GeboArt the specific errors I was referencing were from the installation log files. For an error when opening Dreamweaver I would recommend you start a new discussion in the Dreamweaver Support forum at http://forums.adobe.com/community/dreamweaver.

  • RELEVANCY SCORE 2.40

    DB:2.40:Question About Mybuzz 7c


    does playing mybuzz on your pc count towards the number of times you have to play it to get those bloody trophies lol seen as you have to sign into the PSN to play them or is it only when you play on your PS3 ?



    DB:2.40:Question About Mybuzz 7c


    MyBuzz is the least of my worries for trophies, there only short.

    I have to play 48 mulitplayer games and I normally only play one every week or so.

  • RELEVANCY SCORE 2.40

    DB:2.40:Question About Iphone 2.0 sf


    For those of you that have successfully installed it do you have a contacts icon on the home screen as well now?

    DB:2.40:Question About Iphone 2.0 sf

    Hi himynameusscot;

    I guess it was to save a click.

    Allan

  • RELEVANCY SCORE 2.39

    DB:2.39:Lego City Space Shuttle Question? fs


    Question about 3367 Space Shuttle? How are we supposed to launch it?I used to have the entire Launch Command collection from 1995 and those shuttles were much smaller but they did include the booster system.The rocket and capsule that comes with 3368 is based on the new Titan delivery system that is our next gen space program in real life but maybe we could attack the shuttle to that?Does anyone have both kits? can this be done? and how nice are the sets?

    DB:2.39:Lego City Space Shuttle Question? fs

    I was curious WHY LEGO didn't include the booster rockets with this shuttle as they have done with EVERY prior shuttle kit.I like to display my Shuttles sitting on their Launch Pad... and was curious if anyone built anything custom for it. I just have the one WITH the booster rockets.



    ManiacJumpyNinja

  • RELEVANCY SCORE 2.39

    DB:2.39:Continuous Play Question sc



    I signed up for this about 10 days ago and still have not heard a thing. How long do they take normally or should i call ?

    And has anyone had any problems with this service, or has it been all good with those of you who have used it ??




    DB:2.39:Continuous Play Question sc


    Thanks guys. Just read a thread that has appeared at the top lol. Strange that..




  • RELEVANCY SCORE 2.37

    DB:2.37:Question About Folders m8



    I am looking at buying the Fuze because I understand that with the firmware upgrade, the Fuze can be used as a folder-based mp3 player. (These are becoming hard to find, but for my purposes, they just work better). My question is can I name the folders whatever I want and see those names on the Fuze? Example: Can I name a folder "Lectures" and have sub-folders of "Dr. Smith" "Dr. Jones" etc.? Or, a "Classical" folder with sub-folders of "Chamber" "Elgar Faves" etc?....and actually see these names on the Fuze?

    Thanks so much for your help as I consider the Sansa Fuze to replace my not-enough-capacity Creative Muvo V-100 that's worked flawlessly for three years.

    My daughter has the Sansa e200 series player and while it doesn't support folders, she likes it and finds the community here very helpful.

    Thanks again.....

    DB:2.37:Question About Folders m8


    I am looking at buying the Fuze because I understand that with the firmware upgrade, the Fuze can be used as a folder-based mp3 player. (These are becoming hard to find, but for my purposes, they just work better). My question is can I name the folders whatever I want and see those names on the Fuze? Example: Can I name a folder "Lectures" and have sub-folders of "Dr. Smith" "Dr. Jones" etc.? Or, a "Classical" folder with sub-folders of "Chamber" "Elgar Faves" etc?....and actually see these names on the Fuze?

    Thanks so much for your help as I consider the Sansa Fuze to replace my not-enough-capacity Creative Muvo V-100 that's worked flawlessly for three years.

    My daughter has the Sansa e200 series player and while it doesn't support folders, she likes it and finds the community here very helpful.

    Thanks again.....

  • RELEVANCY SCORE 2.37

    DB:2.37:Putting The Insert Panel Along The Top z1



    in dwcc 2014 how do I go about putting the insert panel along the top of the window?

    thx in advance

  • RELEVANCY SCORE 2.37

    DB:2.37:Sitemaps? z3



    Ok, I have been looking without success for a DWCC Extension for xml, html Sitemap generator, be nice to have an ror as well. I am not having any luck? Reccomendations?

    DB:2.37:Sitemaps? z3


    Use the DWCS6 Extension Manager to convert the extension to ZXP. You will then be able to use it in DWCC

  • RELEVANCY SCORE 2.36

    DB:2.36:Quick Question About Cisco 3560 And The Web Device Manager sd



    Alright, I have a quick question that I am curious about but I haven't found any informationabout it.

    When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below thediagram of the switch, then under the Dashboard there is section called SwitchHealth, Port Utilization.

    Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sitat zero and do not move. The Port tilization graph is also sitting at zero.

    Is there a way to make them functional?

    DB:2.36:Quick Question About Cisco 3560 And The Web Device Manager sd


    Alright, I have a quick question that I am curious about but I haven't found any informationabout it.

    When I log into my Cisco 3560 using the web portal to get to the Device Manager. Below thediagram of the switch, then under the Dashboard there is section called SwitchHealth, Port Utilization.

    Under the Switch Health there is Bandwidth Used, Packet Error. Those two options just sitat zero and do not move. The Port tilization graph is also sitting at zero.

    Is there a way to make them functional?

  • RELEVANCY SCORE 2.35

    DB:2.35:Question For Sl Oldies (Those That Have Been Here For A Few Years) k3



    Having been in sl for over seven years now, I have seen many changes during that time , some good , some not so good , and having thought it about it a lot , was wondering how many still think SL is the same experience for them that it was when they first discovered sl .......... and am I the only one who thinks there seems to be far less people in sl now than there used to be , despite the seasonal fluctuations ... ?? share your opinions




    once a Pirate always a Pirate!

    DB:2.35:Question For Sl Oldies (Those That Have Been Here For A Few Years) k3


    yes , I agree ........a lot more sims , usually with just one or two people in them ...........which is hardly encouraging for social activities ............maybe the solution would be for LL to make sim ownership more difficult .......with the reasoning being more social interaction .........or maybe limit the uses of sim ownership .........ie , no sims for private residences only ........ but of course that will never happen because of the fall in revenue for LL ....... but we can all wish




    once a Pirate always a Pirate!

  • RELEVANCY SCORE 2.34

    DB:2.34:Question : Staging Table To Create And Manipulate Records And Then Save It To The Actual Table p1


    Hi,I wanted to create a staging table to import the files so that later on I can manipulate those records and finally save it the database.I had used placeholder for that purpose but I can not create/insert rows in it. Since its not through an entity object.Do anyone have an idea about it?

    DB:2.34:Question : Staging Table To Create And Manipulate Records And Then Save It To The Actual Table p1

    You can even create a transient EO, an EO where you add all attributes and not persisted ( remove the checkmark from the persistent checkbox). Then you build a normal VO on this EO. Timo

  • RELEVANCY SCORE 2.34

    DB:2.34:Question To Those Got Fr From Amex kx



    . I am debating what I should about my accounts with Amex. I have question to those who had FR with Amex. What is your experience and outcome? Please share your experiences

    DB:2.34:Question To Those Got Fr From Amex kx


    IME, at the point of F/R, Amex isn't particularlyinterested in having any sort ofdialogue with the card holder.

    Ifthe member undergoing F/R doesn't want toprovide the documents requested,thenthey can1. close the acct(s) or 2. haveacct(s) closed by grantor.




    FICOS:06/13 EX 765 (PSECU) EQ 771 (DCU) TU 779 (Barclays)

  • RELEVANCY SCORE 2.33

    DB:2.33:Question About Looping. 8s


    i understand the use of FOR loop and do while loop and while loop..
    They are used to do repetition tasks
    My question is what is the purpose of those method since all doing the same thing (doing repetition tasks). why not only just had for loop method theory.........

    DB:2.33:Question About Looping. 8s

    The different methods of looping are examples of syntactic sugar (they aren't really required but they make programming easier and less error-prone). To take your question to the extreme, all that is really needed for programming is sequence, selection and branching. But a language based on only necessary elements (such as assembler language) is very hard to read and very easy to screw up:10000 i = 0;
    20000 if (i = 30) goto 50000
    30000 valueat[arrayStart + (i * sizeof(arrayElement))] i;
    40000 goto 20000;
    50000 [end]

  • RELEVANCY SCORE 2.33

    DB:2.33:Dreamweaver Behaves Strange 8p



    Hi,

    I have been working with Dreamweaver CS6 for nearly 2months and I have an always recurring problem which I am experiencing from the beginning. First started with this: DWCS6 did not launch the actual document which I was working on. I launched a .php script and it seemed to me that it launched a stale code because I frequently changed the code and didn't notice any changes in the browser not even got an err, this symptom was present some time not always. Next, I declared a class I used the file some time and i deleted than got an err than recreated, and gave me an fatal error: class redeclaration, so i commented out the class my initialize.php file and everything was working, but without this class declaration I should have gotten an error that xxx.php is missing. So my guess that DW was getting that xxx.php file from a cache cos didn't matter that recreated or deleted the file from that point, my code was working anyway, I DONT KNOW!!!. Something very strange is happening about DW caching mechanism because I have no control over it, sometime it launches old code and dont synchronise well, and I experince the same with DWCC so the caching mechaism is the same. What I could be missing? Something is very not all right...

    DB:2.33:Dreamweaver Behaves Strange 8p

    I have initialize.php which initialize all my classes. . .with initialize.php

    So I will ask again. Are you using a PHP framework? If so, which one? If not, what is the collection of classes? Are these classes you wrote?

  • RELEVANCY SCORE 2.33

    DB:2.33:Question Regarding Licenses (Mailboxes) c7


    I have a question regarding licenses:Let's take an example. Let's take we have an EmailXtender with 200 mailbox licenses, and all the licenses are being used since there are 200 user mailboxes in the Exchange. If we delete few mailboxes in the Exchange, while the already archived mails for those should still be available via EmailXtender, will the licenses used for archiving those mailboxes be freed for the new mailboxes?

    DB:2.33:Question Regarding Licenses (Mailboxes) c7

    From the EMC Case:Licenses are related to the active Exchange users who can search archived emails; everyone who can use Outlook and Search Plugin are accounted in this number.

  • RELEVANCY SCORE 2.33

    DB:2.33:I Like My Layout In Dwcs6 (Code Top - Design Below) So How Do I Change My Workspace In Dwcc? f3



    I like the cloud option and many of the new features of DWCC but I do not use it often because I cannot find an easy way to configure my workspace to my liking. The side by side format does not allow me to see the webpage as laid out on the web. Either the code is squashed or the design is resized and div/apdiv areas overlap and do not give a fair rendering of the finished product.

    Anyone have any advice? Reconfiguring a new product or release is frustrating.

    Thanks,

    Rick

  • RELEVANCY SCORE 2.32

    DB:2.32:Disc Defragmenter Problems - Icq, Zonealarm? 37



    Hi,

    I have a question about defragmenting. I used to run defragmenter every week, no problems. Now it won't run. The window for it opens, it says defragmenting, but it stays on 0% for about 45 minutes.

    The only thing that changed on my pc since the last defrag was ICQ and ZoneAlarm install. Is it possible that one of those programs keeps defragm from running?

    Thanks for any advice.

    DB:2.32:Disc Defragmenter Problems - Icq, Zonealarm? 37


    I did defrag finally, in SafeMode.

    I don't have XP, stil on windows ME =)

    Thanks for Adware and Spybot search info.

  • RELEVANCY SCORE 2.32

    DB:2.32:General Question About Hrp**** Infotypes a3



    Hi,

    I have a general question. What are those HRP infotypes.My understanding is those infotypes are used for defining and maintaining Organizational Management data. But my question, is there any infotype which I could see through pa20. I dont see any infotype if I type 1000 in the infotype field of pa20.

    DB:2.32:General Question About Hrp**** Infotypes a3


    Hi,

    HRP tables will come under Personal Development.

    It can be viewed only through as mentioned by our friend.PP01,PP02,PO13...

    PA20 or PA30 transactions are used for Personal Administration infotype maintainance.

    Here PA,TM and payroll infotypes are viwed.

    Regards,

    Manoj.

  • RELEVANCY SCORE 2.32

    DB:2.32:Migrate Site From Dwmx To Dwcc (Was "I") 87



    I have a current website I built with Dreamweaver 6.0 many years ago. How do I migrate it to use with my Dreamweaver CC which I just purchased

    Glenn T

    DB:2.32:Migrate Site From Dwmx To Dwcc (Was "I") 87


    Thank you again for the reply and information. It looks I will be spending the next several days viewing tuterals and the information exercises you sent. I think I have located a friend who can help me with some catch up work with relearning Dreamweaver.

    Glenn Tadina

  • RELEVANCY SCORE 2.32

    DB:2.32:Re: Inventor Assemble Command pc



    I am a Product Manager for Inventor and have a quick question for those of you that use the Assemble command in Inventor. As many of you know, we added the Assemble command in Inventor 2010 to make it easier to position components and add constraints to them.

    Have you used it?Do you use the Assemble command as your main tool to assemble components over the Constraint command?What do you like about it?What do you dislike about it?How often do you use it over the Constraint command?
    Thanks for any feedback!!

    DB:2.32:Re: Inventor Assemble Command pc


    If I recall correctly, I tried it in Inventor 2010, didn't see any advantage over the place and constrain workflow and haven't used it since. I may have to have another look. Has it been enhanced in any way since its introduction?

  • RELEVANCY SCORE 2.32

    DB:2.32:How Do The Load Test Stop When The Time Is Out? sd


    Hi, all
          Here I have a question about the load test. When the time duration is used up, how does the framework stop all the unfinished tests in a load test. Does it simply kill all the threads immediately? Or it stops smoothly, let those started threads to finish and stop creating new threads?
         Thx
    Tracy  

    DB:2.32:How Do The Load Test Stop When The Time Is Out? sd

    Do you mean:
    No matter whethera thread is in a critical section, it will be killed immediately?
    Thx
    Tracy

  • RELEVANCY SCORE 2.31

    DB:2.31:Replacing Flash Buttons/ Preview Issues 7z



    I have old Flash Navigation Buttons on my website from years ago. I have been trying to replace them. What would be some good and simple ways to do this? It appears that the programs (DW5, DW6, and DWCC) won't let me do this. For example, I deleted the flash button that says "About" and then typed in new word "About" instead and linked it in a simply way to the "About" page.

    However, when I preview this in browsers, my flash button/s are still appearing in the preview window browser, even though already deleted many times in my Design View. The preview page has also showed all sorts of disorganization and chaos for these deletions of old navigation buttons which are not consistent with what is displaying on my working Design copy window. Any suggestions? (Mac Os X 10.8.4)

    DB:2.31:Replacing Flash Buttons/ Preview Issues 7z


    You're putting your words inside noscript tags. That's why they're not showing.

    Also, this code needs a serious make over. I don't think you're capable of "fixing" this without a good deal more coding skills.

    Why don't you just start over with a fresh new pre-built CSS Layout in Dreamweaver? Go to Files New blank page HTML. Choose a layout from the 3rd panel hit create button. Apart from being very old school, table layouts are clumsy inefficient. We just don't use them for layouts anymore.

    Nancy O.

  • RELEVANCY SCORE 2.30

    DB:2.30:Question About Uninstalling Silverlight pc


    Hi,

    Is it okay if I ONLY uninstall Silverlight?

    I was also wondering about the Silverlight updates you get through Windows Update. Do I have to uninstall those as well?

    NOTE: I have Windows 7 Home Premium SP 1 64-bit

    DB:2.30:Question About Uninstalling Silverlight pc

    If you are trying to save space, removal of Silverlight will go totally unnoticed by the system.. It is a pointless exercise to remove it..

  • RELEVANCY SCORE 2.30

    DB:2.30:One More Lighting Question About Softness 1k


    Hey all! First off thanks to those who replied about my last issue with lighting it really helped! My next question is about getting a softer look. I did a rendering for a client a week ago and i noticed taht in the past the guy who used to do renderings had a softer feel for all his renderings. What is the setting to get that softer look? Whether its in the lighting or in the materials i'm not so sure about...thanks!

    DB:2.30:One More Lighting Question About Softness 1k

    Try playing with mental ray: •In the Create tab, go to the Systems button and use Daylight. •Change the Sunlight to mrSun, and change the Skylight to mr Sky•If it's an interior scene, turn on GI and Final Gather (Draft). If it's an exterior scene Final Gather (draft) will work by it'self (this in the Render Scene settings under Indirect Illumination).•Hit 8 on your keyboard to open the exposure settings. Under exposure control choose mr Photographic. Then under Preset select the option that best describes your scene.This should give you a head start!



    www.ramyhanna.com

  • RELEVANCY SCORE 2.30

    DB:2.30:Question About S4 Sensors jd


    Hi all,

    I have a question about the S4 sensor (those who are used for Air View and Air Gesture principally) : Is there an API and a documentation?

    Thank you,

    Adrien

    DB:2.30:Question About S4 Sensors jd

    Not just yet:
    http://developer.samsung.com/forum/board/thread/view.do?boardName=GeneralBmessageId=238201startPage=2curPage=4

    This content has been quoted from adrien.walesch@s thought. (Link to original post)
    Hi all,

    I have a question about the S4 sensor (those who are used for Air View and Air Gesture principally) : Is there an API and a documentation?

    Thank you,

    Adrien

  • RELEVANCY SCORE 2.30

    DB:2.30:How To Insert A Date/Time Stamp In Dwcc? 8x



    hi all,

    i just jumped from DwCS3 to DwCC and now the spry date and time stamp won't work after updating the template. i was using this to display the last updated date on the page. what is the new way of doing this?

    i tried insert . date, but all that did was put some obsolete macromedia copyright in thehead section of the code.

    i also downloaded dmxHTML5DataBindings-1.3.0.zxp per an article about work-arounds for CC omissions, but get a cannot find app error message when i click on the /zxp file. (i also hjad to switch from mac to pc so kind of clueless there, too.) plus, this is not a database site so not sure that would even work.

    and i also downloaded the spry stuff from git hub (per the same workaround article) but have no clue how to get it into my DW install.

    thanks in advance for your help ...

    DB:2.30:How To Insert A Date/Time Stamp In Dwcc? 8x


    thank you for your help, nancy.

    from everything i can find, insert date shoudl still workthe same way even in CC so i may need to reinstall. in the meantime, i got a little primer on jQuery. :-)

  • RELEVANCY SCORE 2.30

    DB:2.30:How To Add 100 Databases To Oud 19


    I have one question if you have some doc or reference link where i can ask this Question :-I want to add 100 databases to OUD(Oracle Universal Directory ) but i have to used netmgr to add those which is quite time consuming . Is there any easy way i can add those 100 databases to OUD to databases .Please provide me examples and syntax to used that.

    DB:2.30:How To Add 100 Databases To Oud 19

    Hi, The wording "Database" is indeed subject to discussion. So if "Database" means Oracle DB, follow Florence's instructions. If "Database" means OUD backend/storage unit, follow my post.-Sylvain----When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

  • RELEVANCY SCORE 2.30

    DB:2.30:Ht1420 I Require To De Authorise A Comuter No Longer Used dx


    Homesharing tells me i have already have 5 comtured regiistered. 2 of those i have thrown out now can i de authourise those in question, i need to re authourise newer ones?Thanks

    DB:2.30:Ht1420 I Require To De Authorise A Comuter No Longer Used dx

    Refer to the following article on how you will be able to de-authorize all your computers that are currently authorized to play the purchases in your account. iTunes Store: About authorization and deauthorizationhttp://support.apple.com/kb/HT1420If you are having difficulty de-authorizing your computer, you can contact Apple and they should be able to assist you in de-authorizing your computer.You can also contact Apple and they should be able to help you in reseting them for you.

  • RELEVANCY SCORE 2.30

    DB:2.30:Question About Rewards 11


    All right, I have a moment of idiocy to discuss here.

    I have a hotmail account and an outlook account set up. I logged in from my outlook account and used my rewards points I have gathered recently to enter in for the Toys R Us $500 gift card drawing. On another computer, I logged in to bing and found that I had
    700 rewards points (I assumed from friends and such) and entered them into the same contest, not realizing I was logged in to my hotmail account.

    I'm worried I just wasted 900 points from those two accounts because I know in the EUA that I can't enter using two different emails and all entries will be voided. Is there someone I can contact about clearing this up?

    Thanks!

    Doug

    DB:2.30:Question About Rewards 11

    You should follow up this discussion with the Bing Rewards support by clicking through the following for a secure link to voice your concern and generate a support ticket.

    Bing Rewards Customer Support(email to generate a support ticket)

  • RELEVANCY SCORE 2.29

    DB:2.29:Using Deprecated Db Panel Possible? f7



    I know there are several discussions on the deprecated database panel in DW cc. However, I have not found anyone discussing the problems I've had using the reinstalled panel after the last update to DWcc.

    In short, I installed the deprecated database panel and used it without problems before the update. After the update to DWcc a week or two ago however, DW has started to insert the php-code in a somewhat random fashion into the html, resulting in errors when the pages go live. While the pages I edited before the update work fine, they start malfunctioning after being opened and saved in the updated DW - although I have not been able to locate what it is that DW changes in the code.

    My question is simply: are more people having this problem? Is this simply what the label "deprecated" means in this context? Or am I doing something I shouldn't? Thankful for any advise!

    DB:2.29:Using Deprecated Db Panel Possible? f7


    Okay, to illustrate what I am talking about, I created a very simple form for adding users to a MySQL database. Creating a working connection to the database is no problem. However, when I try to add the server behaviour "Input post", the php code cuts through the html and stops it from working. Below, I have included only the code within html tags; the php code added for the server behaviour in the beginning of the document is fine. I have underlined the faulty tags. Needless to say, in such a small page as the one below, I could easily correct the mistakes manually. On a larger site, that solution is unfeasible.

    Again, does anyone know whether this error lies with DW or with me? Although having worked a bit with coding online sites before, I'm new to DW and started using the software only after it became cc. Looking forward to the DMXzone addon.

    html

    head

    meta charset="UTF-8"

    titleAdd user/title

    /he method="POST" action="

    ?php echo $editFormAction; ?

    " name="addUser"ad

    body

    form id="addUser"

    plabelUsername:/labelinput type="text" name="username"/p

    plabelPassword:/labelinput type="text" name="password"/p

    input name="subinput type="hidden" name="MM_insert" value="addUser"

    mit" type="submit" value="Submit"

    /form

    /body

    /html

  • RELEVANCY SCORE 2.29

    DB:2.29:Preserving My Streets And Trips Maps m9


    I have taken about 20 cross country tripsaround and back again since 2005. I have used Streets and Trips for these and all the places and campgrounds and gas stationsand even mistakes have been recorded and saved in ST.
    My question is how will I be able to preserve those trips for posterity. It worries me that there may not be any program that will be able to open and read this data in the future. Please help.

    DB:2.29:Preserving My Streets And Trips Maps m9

    Looking at the GPX File you sent me it appears that there is no valid date time information in there. If that information was in that file I likely would of been able to get that to also appear in the solution I provided you.http://rbrundritt.wordpress.com

  • RELEVANCY SCORE 2.29

    DB:2.29:Thread: Replacing The Default Icons.Dll 7f


    I have a C3PO that adds a toolbar button and works perfectly when I click on it. This is done with the using the default icons.dll file.

    However, when I try to create a new file with Visual Studio 2008, it doesn\'t show up. I have extracted the files from the default icons.dll and used those same exact icons and bitmap to try and create something new. Everytime I do that, it never shows up in the toolbar. This is a stupid question but can somebody give me a starting point to creating either a new dll or exe that can be used with the C3PO API in VS2008? I read somewhere that it can be in an exe or dll file and I\'ve tried just about every kind of those file types in VS2008 and nothing works.

    Thanks in advance.

    DB:2.29:Thread: Replacing The Default Icons.Dll 7f

    1) You have to define the name of the dll where the icons are stored; default is

    icons.dll.

    2) Make a copy of the icons.dll and use ResourceHacker

    (http://angusj.com/resourcehacker/) to change/add/remove icons/bitmaps.

    Hope this helps.

    Markus

    PaulinCA PaulinCA@no-mx.forums.novell.com schrieb im Newsbeitrag

    news:PaulinCA.3rkavz@no-mx.forums.novell.com...

    I have a C3PO that adds a toolbar button and works perfectly when I

    click on it. This is done with the using the default icons.dll file.

    However, when I try to create a new file with Visual Studio 2008, it

    doesn\'t show up. I have extracted the files from the default icons.dll

    and used those same exact icons and bitmap to try and create something

    new. Everytime I do that, it never shows up in the toolbar. This is a

    stupid question but can somebody give me a starting point to creating

    either a new dll or exe that can be used with the C3PO API in VS2008? I

    read somewhere that it can be in an exe or dll file and I\'ve tried just

    about every kind of those file types in VS2008 and nothing works.

    Thanks in advance.

    -' + '-

    PaulinCA

    -' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-' + '-

    PaulinCA\'s Profile: http://forums.novell.com/member.php?userid=52010

    View this thread: http://forums.novell.com/showthread.php?t=371288

  • RELEVANCY SCORE 2.29

    DB:2.29:Enough Of Those 'Ask' Topics. 9c



    Ok, so lately there has been many 'Ask' topics. Well.... we don't need those. If you have a question about the MBs, ask the mods, NOT a user. Sign if you agree.




    -WqualIf you try, you can do anything.COLORS

    DB:2.29:Enough Of Those 'Ask' Topics. 9c


    Ok, so lately there has been many 'Ask' topics. Well.... we don't need those. If you have a question about the MBs, ask the mods, NOT a user. Sign if you agree.




    -WqualIf you try, you can do anything.COLORS

  • RELEVANCY SCORE 2.29

    DB:2.29:Ot David Powers 3j



    David are you going to write any books using dwcc with php, as you have in the past, Thx

    DB:2.29:Ot David Powers 3j


    David_Powers wrote:

    David_Powers wrote:

    Writing a book involves many months of work,

    I bet it does and the rest!

    David_Powers wrote:

    As for existing books, my PHP Solutions: Dynamic Web Design Made Easy, 2nd edition devotes 200 pages to working with MySQLi and PDO. Although it was released three years ago, it's still one of the most popular PHP books on the market, and is still up to date.

    I'll have to take a look at that.

  • RELEVANCY SCORE 2.29

    DB:2.29:Question About Friends List 8j



    Hi, hope someone can help me

    I am on Phoenix and this morning my entire Friends list shows offline.

    Through random picks from the inworld list, their profile shows them online.

    They have not unclicked me.

    I have restarted 3 times and cleared cache 2 of those.

    DB:2.29:Question About Friends List 8j


    Yes Im Having the same problems started yesterday and still going on today,its really bugging. maybe ill im my landlord and see if he can restart the sim.hopefuly this problem will be fixed soon.If its a Sl thing and not a Viewer problem heres Hoping..

  • RELEVANCY SCORE 2.29

    DB:2.29:Fvwm Question (Crystal?) jp



    Hi!I want to install fvwm, Ive used openbox for quite some time but Im curious about how this works. To those who use it or have used it, what are the pros/cons of installing fvwm vs. fvwm crystal? Is there a major difference?

    DB:2.29:Fvwm Question (Crystal?) jp


    FVWM can look like pretty much anything, on the fly, and it has a sweet per app setup where you can have keystrokes specific to certain apps.

    I definately miss the specific keystrokes on certain apps thing.

  • RELEVANCY SCORE 2.29

    DB:2.29:Question About Proc Boxplot Appearance sj



    Code used:

    proc boxplot data=combine1;

    plot x1*seq/turnhlabels boxstyle=schematic cboxfill=lightmoderategreen vref=40 cvref=red lvref=21 npanelpos=70

    boxwidth=1 clipfactor=16 clipsymbol=square cclip=red html=alt;

    label seq='Lot in Package Test Date Sequence';

    run;

    Output destination: HTML

    SAS Version 9.4 TS1M2, Windows 7 Professional 64 bit

    Why do my boxplots have red squares at the ends of the "whisker", those should be only used as the clipping symbol; and furthermore why do the boxes at the right of the plot not have these red squares?

    DB:2.29:Question About Proc Boxplot Appearance sj


    Code used:

    proc boxplot data=combine1;

    plot x1*seq/turnhlabels boxstyle=schematic cboxfill=lightmoderategreen vref=40 cvref=red lvref=21 npanelpos=70

    boxwidth=1 clipfactor=16 clipsymbol=square cclip=red html=alt;

    label seq='Lot in Package Test Date Sequence';

    run;

    Output destination: HTML

    SAS Version 9.4 TS1M2, Windows 7 Professional 64 bit

    Why do my boxplots have red squares at the ends of the "whisker", those should be only used as the clipping symbol; and furthermore why do the boxes at the right of the plot not have these red squares?

  • RELEVANCY SCORE 2.29

    DB:2.29:Missing Icons In Dialogue Windows xs



    Hi

    Since using DWCC and DW2014 certain icons have disappeared in dialogue windows, see screenshot below. I mostly know what they are from previous versions but it is annoying. Does anyone know how I can get them back?

    Thanks

    Eric Lewis

    DB:2.29:Missing Icons In Dialogue Windows xs


    You are correct that this is an extension. But it is an Adobe approved one and merely restores functionality that is not available by default.

  • RELEVANCY SCORE 2.29

    DB:2.29:Encryption Of Initial Load 19


    I have a question about GoldenGate Initial load of data. When performing the initial data load, the direct load of data from source to target, can the data be encrypted? Using the data pump method, there are parameters for encryptrail and decryptrail. Those are used for encryption. I did not see any option like this for initial load. Can I use the database pump parameter for encrption?

    DB:2.29:Encryption Of Initial Load 19

    I don't think any such option is available. Those options are for encrypting trails.

    May be you can use expdp/impdp with encryption for the initial load and then encrypt the trails in the GG configuration.

  • RELEVANCY SCORE 2.29

    DB:2.29:Itunes Status And Aim Users zx


    Hi all!

    I'm admittedly not a "seasoned" iChat user (I've used AIM, AOL and ADIUM until recently), so I hope this question isn't something I overlooked.

    About 90% of my AIM friends use the AIM (or AOL) client--and of those, the majority are on the PC. When I'm speaking to them via iChat, everything runs smoothly--but I was wondering 2 things:

    1) Can those users see my "current iTunes track" status? Is there a simple way to make this happen?

    2) on that same note, is there a way to use my current iTunes track as an AWAY message that auto-replies to those AIM users when I am away?

    Again, forgive me if this has been asked before, I have been searching the forums, but didn't see my exact question as it related to the current (4.0) version of iChat.

    Thanks in advance, everyone

    DB:2.29:Itunes Status And Aim Users zx

    Ha! Thanks, Atomic--however my AIM friends never seem to see it I don't know what the problem is.

    Oh and about the 'away message' thing: I see your point... I thought it might be a cool idea to have that display when I'm away from AIM, not necessarily away from my computer physically. (I know a users who set their away message to the iTunes status since they have iTunes constantly running in the background).

    Anyhow, I'm still a bit puzzled why many users can't see my iTunes status... I guess maybe it's a "version" problem.

  • RELEVANCY SCORE 2.28

    DB:2.28:Base Question About Anchor Buoy Structure c7



    Quick question about the A/B method:

    Why are separate tables used for Addresses, Phones, Emails, etc in many of the existing examples?

    Why would a single Attributes table not suffice for collecting those in one table?

    (I guess at that point I'm nearly back to collecting all that information into a Person or Company table like I have done before.)

    Forgive the simplicity of the question, I'm working to learn this methodology and I want to understand the rationale behind segmenting these items.

    Thanks in advance...

    DB:2.28:Base Question About Anchor Buoy Structure c7


    Yes, one gets marked as primary (same with the phones). And you can provide the option to email to "all" or just the primary. On some layouts, I have a button (or a drop-down list) to send email to and you manually select which one.

    Beverly

    Beverly: how do you the manange sending e-mail to people? Does one get marked as "primary" or does a message get sent to all a person's e-mail?

    Thanks.

  • RELEVANCY SCORE 2.28

    DB:2.28:Question About Pfd's mm



    I have a couple of collections I want to try to PFD. Could I tell them that I have multiple collections andthat I am going to pay those that accept the PFD first? Or would this just make them more actively try to get my money?

    DB:2.28:Question About Pfd's mm


    Hi and Welcome to the forums

    You are wanting something from them, a delete. So I wouldn't start off by antagonizing them.

    Remember that old saying.....You attract more flies with honey, then with vinegar.




    FICO's Oct 2013 TU711 EQ713 EX723~~Live below your means and always keep an emergency fund -Love Everybody ~ Big Kenny ~ Big and Rich ~~~~~Credit Scoring 101 - Common Abbreviations - Freq Req Threads - Free Credit Reports - What Steps Do I Take?DV? PFD?

  • RELEVANCY SCORE 2.28

    DB:2.28:Object Data Source 97


    hi,
    i wanna ask a question about using methods in object data source.In my web application i have a .cs file which contains many object in my project namespace.I used one of those object methods in my object datasource before but during coding i don't know what happened that no object data sources can detect the objects and methods.
    Thanks for any answers

    DB:2.28:Object Data Source 97

    [DataObject(true)]
    public class UserManagement
    { ....
    [DataObjectMethod(DataObjectMethodType.Insert)]
    public void Register(User UserProfile)
    {... }
    }
    i tried that and it still doesn't appear:(

  • RELEVANCY SCORE 2.28

    DB:2.28:Question About Agent On Iseries And Job Interception ak



    Hello group,

    I am trying to understand what happens with the interception method of the agent whem the CTMORDER has to be used.

    Lets's say that we have JOB_A that submits JOB_B, JOB_C and JOB_D at some point of time.

    I already have the definition of those jobs in COntrol-M so I want to do the interception and submit them from Control-M....

    If I submit JOB_A from control-m will the agent understand that JOB_A is trying to submit those 3 jobs and stop it and then run the CTMORDER from Control-M?

    Regards

    Dimitris

    DB:2.28:Question About Agent On Iseries And Job Interception ak


    Hello group,

    I am trying to understand what happens with the interception method of the agent whem the CTMORDER has to be used.

    Lets's say that we have JOB_A that submits JOB_B, JOB_C and JOB_D at some point of time.

    I already have the definition of those jobs in COntrol-M so I want to do the interception and submit them from Control-M....

    If I submit JOB_A from control-m will the agent understand that JOB_A is trying to submit those 3 jobs and stop it and then run the CTMORDER from Control-M?

    Regards

    Dimitris

  • RELEVANCY SCORE 2.27

    DB:2.27:Po Item Complete Flag d7



    Hi , expert ,

    I have a question about po ,

    The po items have been set as "complete flag", but those shortage items' quantity still can be used in MIGO, can someone help me out on this question?

  • RELEVANCY SCORE 2.27

    DB:2.27:Open Question: Question To Those Who Comment About The Lack Of Apps For Windows Phone 8 1z



    We have read every Lumia review and we are listening. An open question to those who comment about the lack of apps for Windows Phone 8.Tell us which apps you miss? Nokia/MSFT Customer Care

    DB:2.27:Open Question: Question To Those Who Comment About The Lack Of Apps For Windows Phone 8 1z


    Waze is also already on Windows Phone and since it looks like you have concerns for travel, Uber also just re-released on Windows Phone today.

  • RELEVANCY SCORE 2.27

    DB:2.27:Directory Services And Windows Question 8k


    If this question has been asked before or if it seems really simple I am sorry. I have a client that has a small windows work group of XP machines. They want to move to a client server infrastructure but are not interested in the headaches involved in Windows licenses and have asked me about OS X Server on a Mac Mini. My question is if I create the users in the Mac server directory services can they use those usernames and passwords to log into their machines essentially making the Mac Mini run as a "Domain Controller" role or would those usernames and password only be used to authenticate to resources hosted on the Mini?

    T

    DB:2.27:Directory Services And Windows Question 8k

    If this question has been asked before or if it seems really simple I am sorry. I have a client that has a small windows work group of XP machines. They want to move to a client server infrastructure but are not interested in the headaches involved in Windows licenses and have asked me about OS X Server on a Mac Mini. My question is if I create the users in the Mac server directory services can they use those usernames and passwords to log into their machines essentially making the Mac Mini run as a "Domain Controller" role or would those usernames and password only be used to authenticate to resources hosted on the Mini?

    T

  • RELEVANCY SCORE 2.27

    DB:2.27:Question About Buying Used Ninjago Sets 9j



    I'm right now contemplating getting several out-of-print Ninjago sets as a bulk deal on eBay, and I have some questions:

    1) Since I have kids, is it a good idea to buy sets that have been played already?

    2) If I want to clean LEGO sets, what should I use that will not harm the LEGO bricks?

    I'm really tempted to get those sets since they are cheaper than the unopened sets, but I want to solicit some advices before I bid on the items. Thanks.

    DB:2.27:Question About Buying Used Ninjago Sets 9j


    Hi there. I have some tips that will help.

    1.) I have bought used old legos before at a garage sale and some of the parts are missing so be careful when buying off eBay, check the sellers reviews.

    2.) Fill a bucket with warm water and add a little bit ( about a cup or a cup and a half ) of vinegar to the water then put the legos without any stickersin the water, any legos with sticker take a paper towel and spray it damp with vinegar and wipe clean. Vinegar should not harm the legos, don't add just vinegar that might eat the LEGO bricks

    3.) I have bought of eBay before and gotTHE CLAW DIGGER of LEGO power minerswith all the part and in good condition, just be careful when buying sometimes top rated sellers are not the best.

    That's all the tips I can think of.

    I can't work without candy canes and coffee

    That's all from theninja of lightning

  • RELEVANCY SCORE 2.27

    DB:2.27:Question For Those Who Ordered From Gameseek? 8j



    Hi, this is the first time I've ever used gameseek, just got my email saying its being despatched today. About 10minutes ago I received my email

    What are the chacne of me getting it tomorrow? I know its all sent first class and would presume it is here by the next working day? Or is it more likely tuesday?

    Just wondering as I've never used em before. Thanks.
    Message Edited by Gornall on 27-04-2008 05:36 PM



    Those who have ever claimed "nothing is impossible" clearly haven't tried slamming a revolving door.

    DB:2.27:Question For Those Who Ordered From Gameseek? 8j

    Awesome mate. Looking forward, to it.



    Those who have ever claimed "nothing is impossible" clearly haven't tried slamming a revolving door.

  • RELEVANCY SCORE 2.27

    DB:2.27:Looking For Information Regarding Native Microsoft.Systemcenter.Wsmanagement.Timedenumeratediscoverydata Module jj


    Microsoft.SystemCenter.WSManagement.TimedEnumerateDiscoveryData

    http://msdn.microsoft.com/en-us/library/jj130215.aspx
    This is a WS-Management module which I have a question about. It takes a parameter called Filter. I am looking for some guidance or a real world example where it is used and more specifically outside of the Windows OS, as those examples already
    exists. Further XPATH would be nice or some other dialect than WQL.

    DB:2.27:Looking For Information Regarding Native Microsoft.Systemcenter.Wsmanagement.Timedenumeratediscoverydata Module jj

    To add to this, it doesn't appear the filter accepts anything but WQL. I am hoping someone can confirm this for me.

  • RELEVANCY SCORE 2.27

    DB:2.27:Nfcu Auto Loan Question jx


    For those of you that have gotten a loan through them, is it possible to get a used auto loan rate say around 4%apr? 2 years ago I was new to loans and rates and I purchased 2 cars one new one used 8.1% apr on the new one and 8.6 on the used. I have about 36 months left on payments and I feels that I could save some money if I could get the interest rate cut in half. Suggestions?



    NFCU plat 5k | NAVCHECK 5k | NFCU cashrewards 15k | BOFA 123 6k |Chase Freedom 1.5k | Amazon 3K | Walmart 3K | Buckle 300 | AMEX BCE 2.5K | CHASE CSP 12K | CITI sears 6k | Kay 2kOn the prowl for Chase Sapphire Preferred! APPROVED 12K!scores 7/14 647 622 630 (85%util)scores 8/14 767 760 758 Boom! finally in the 700 club

    DB:2.27:Nfcu Auto Loan Question jx

    Thanks that's what I was looking for



    NFCU plat 5k | NAVCHECK 5k | NFCU cashrewards 15k | BOFA 123 6k |Chase Freedom 1.5k | Amazon 3K | Walmart 3K | Buckle 300 | AMEX BCE 2.5K | CHASE CSP 12K | CITI sears 6k | Kay 2kOn the prowl for Chase Sapphire Preferred! APPROVED 12K!scores 7/14 647 622 630 (85%util)scores 8/14 767 760 758 Boom! finally in the 700 club

  • RELEVANCY SCORE 2.27

    DB:2.27:Plus Question 8p


    I know that on PS3 if youve ever used a free trial of PS+ you cant use anymore, being that its the same account across all consoles im assuming this should be the same for PS4?

    I ask cause were getting this 14 days PS+ with our PS4's but will this only apply to those who have never used a PS+ trial? if not and it will apply to all then how about the 7 days trial that will be included with a few PS4 games?




    DB:2.27:Plus Question 8p


    Yeah i'll be doing the same skillshot was just curious to find out how this would go.




  • RELEVANCY SCORE 2.27

    DB:2.27:Features m3


    I have a question about the features of the digital editions. Can I use this application to uderline the text of the documents and save those changes in my private copy?

    DB:2.27:Features m3

    Congratulations with a slick looking viewer/organiser!

    I also have a few feature requests:

    * I want to be able to see a "hybrid" view of the library and reader sections: I want to see the library left pane and/or library list view and under that a preview/reader pane of the currently selected eBook in the library list

    * I don't like the "borrowed" or "purchased" libraries and want to delete these, but this doesn't seem to be possible. So next request is a more flexible system for organising(adding/deleting/hiding/moving up and down in list) libraries.

    So in short: more flexibility of viewing and organising

    Thanks and Greetings,

    Steve

  • RELEVANCY SCORE 2.27

    DB:2.27:Now Using Dwcc... Where Have The Layout Colums Gone? sj



    I am used to CS5 and there were lots of options to select layout colums when selecting a new project. Now there are only two - two column and three column fixed. Are they all gone or are they somewhere else?

    DB:2.27:Now Using Dwcc... Where Have The Layout Colums Gone? sj


    How many columns do you need?

    CC is very HTML5 centric. In previous versions of DW, you had more layout choices but many feel that the code was not up to today's web standards. So CC was released with only 2 pre-built, HTML5 layouts -- 2-col and 3-col. You may customize them any way you wish by editing the CSS code or using the CSS Designer panel.

    Also, be sure to check out the Fluid Grid Layouts feature. This allows you to create responsive layouts with as many or as few columns as you require for mobile, tablet and desktop devices.

    If that doesn't provide enough choices for you, download the free Bootstrap extension from DMX Zone.

    EDIT: Here's a link to DMX Zone's Bootstrap

    http://www.dmxzone.com/go/21759/dmxzone-bootstrap?utm_source=Blogutm_medium=linkutm_cont ent=DMXzone+Bootstrap+Released+and+for+Freeutm_campaign=DMXzone+Bootstrap

    Nancy O.

  • RELEVANCY SCORE 2.27

    DB:2.27:Certificate Question ms



    If I already have a PKI rolled out, can somehow use those certs with SCE rather than the self signed ones that seem to be installed and used by default? I can’t find anything in the help about certificates at all.
     

    DB:2.27:Certificate Question ms


    Good to know. I thought it was a bit odd that you couldn't use a SSL cert from a locally deployed PKI, having to push more trusted certificates into each client doesn’t seem like the best way to go, but if that's the only way it can be setup then that's ok.

  • RELEVANCY SCORE 2.27

    DB:2.27:How Come Every Time A Minimized Window Touches A Corner Or Edge Of My Desktop, It Automatically Maximizes? xs



    I have used Firefox for a long time, and I love it. I have reverted back to the 3.6.18 because I totally dislike everything about the 5.0 series. This is my question. I sometimes have a couple of things going in minimized windows. When I move one of those windows around, if it hits a top edge or corner of the desktop, it automatically maximizes that window. How can I disable this feature, it drives me crazy!?

  • RELEVANCY SCORE 2.27

    DB:2.27:Extensions Not Working In Cc 2014 sa


    I have just installed DW CC 2014 which is so far a disaster. I opened a site in the old CC version created and saved a page and then attempted to insert a P7 photo gallery. The P7 extensions are showing up in the old DW CC menu, but will not insert with a click like they normally do. Then I open the file in the new CC2014 and no extensions show up. So I go to the extension manager and see that all of my extensions are installed in the old version and one (not the one I need). So I attempt to install the extension I need and get the following error message: "The extension your are about to install conflicts with the following extensions. Do you want to remove the follwoing extensions and continue installation: The extension 'PVII Image Gallery Magic 2I installed in the product Dreamweaver CC, Dreamweaver CC 2014I click yes and you guessed it, here comes he next error message: Failed to parse XML file: 'C\Users\Joe Dempsey\AppData\Roaming\Adobe\DreamweaverCC\en_US\Configuration\objects\insertbar.xml. The extension will not be installed.If I attempt to remove the extension from old CC I get approximately the same messaage but it tells me it cannot remove it.I'm not certain what I am missing here, but I have a client who expects his photo gallery in the morning and I am at this point: I cannot use the old program to insert the gallery. I cannot use the new program to insert the gallery. Everything worked fine before the installation.Does anyone have any ideas on what to do / or alternatively, the DWCC 2014 product manager's personal cell number?Thanks,Joe

    DB:2.27:Extensions Not Working In Cc 2014 sa

    This gets "curiouser" and "curiouser." I was all prepared to go through the same routine on my laptop, so just for grins, I check to see if CC still worked and it did. Then I checked CC 2014 not only did everything migrate ... both copies of the program work. Go figure.Thanks again,Joe

  • RELEVANCY SCORE 2.26

    DB:2.26:Some Help About Kazaa za


    hello,
    there is a KaZaA software for file sharing
    which is really good...
    well those haven't used it please use it...
    for those who have used it
    for them there is the question........

    ------------
    how does data from multiple files of same content
    come into one file..., having different connections
    of multiple files ?
    actually how do KazaA work for file sharing technique?
    ------------
    please try KaZaA
    and answer this question
    thanks

    DB:2.26:Some Help About Kazaa za

    First I would recomend kazaa lite instead of kazaa ( http://www.kazaalite.com/ ) kazaa without the spyware, and fewer ads.

    Kazaa uses the fasttrack protocol, along with some other clients such as grokster. There is a slightly out of date but interesting article about peer to peer which includes a description of fasttrack here: http://matrix.netsoc.tcd.ie/~neo/4ba2/p2p/

  • RELEVANCY SCORE 2.26

    DB:2.26:Question About Graphics(Jpg,Gif, Tiff Etc.) And Jsp... 97


    Heh I'm new to JSP as you can see. Lets say I've used photoshop or macromedia flash to do some graphics, do I used plain HTML to import those graphics into jsp pages or do I use jsp to do that? What is prefer or the right way to do it?

    DB:2.26:Question About Graphics(Jpg,Gif, Tiff Etc.) And Jsp... 97

    There wont be any biog diff between HTML and JSP. So you can use the normal way in which you display images in the Screen using the IMG Tag

  • RELEVANCY SCORE 2.26

    DB:2.26:Where Can I Get Help When I Have Technical Question 7p


    Sometimes I have technical question about the process of synthesis and implemetation process. For example, some map option doesn't work, some LUTs have been trimmed unwantedly and such like. I want to knowhave Xilinx provided those technical support for regular consumers? How can I get those support? Ifind my WebCast application has been declined.

    DB:2.26:Where Can I Get Help When I Have Technical Question 7p

    Sometimes I have technical question about the process of synthesis and implemetation process. For example, some map option doesn't work, some LUTs have been trimmed unwantedly and such like. I want to knowhave Xilinx provided those technical support for regular consumers? How can I get those support? Ifind my WebCast application has been declined.

  • RELEVANCY SCORE 2.26

    DB:2.26:A Question Of Isolation About My Shure Se310 87


    My shure se310 have some isolantion but I don't know if it's enough to "cancel" enough plane's reactors (inside not outside). I'd like to finally listen to the movie or atleast to my music . It's about 8 hours of travel and I'm ready to wear those isolating helmet used to work in construction or what ever.I wanted to know if any1 have ever tested an earphone like mine, or if any1 got any feedback on that? Message Edited by WorstName on 06-30-2008 05:06 PMMessage Edited by WorstName on 06-30-2008 05:07 PMMessage Edited by WorstName on 06-30-2008 05:08 PMMessage Edited by WorstName on 06-30-2008 05:08 PMMessage Edited by Julez on 06-30-2008 08:19 PM

    DB:2.26:A Question Of Isolation About My Shure Se310 87

    Hi WorstName,I have the Shure SE310 earbuds. Unless you have ridiculous hearing, they will be enough. They won't block out everything, but you will be able to forget you are on a plane, and won't hear when they ask you what you want to drink. And they feel like you're wearing a cloud in your ears!-Cayla



    ----------------------------------Mobile Audio Product Expert027 St James Winnipeg

  • RELEVANCY SCORE 2.26

    DB:2.26:Re: Dump Database From Java 7k


    But your question is that you don't understand the output of the mysqldump command, isn't it? That has nothing to do with the fact that you used Java to cause it to run. And likewise your second question, the one about the password, is also a MySQL question. There is a MySQL forum you can ask those question on.

    DB:2.26:Re: Dump Database From Java 7k

    I want to dump a data base using java. Here is what i made: .......... public static void export(){ String dumpCommand = "mysqldump " + database + " -h " + ip + " -u " + user +" --password=" + pass +" " + path; File tst = new File(path); FileWriter fw = null; try{ fw = new FileWriter(tst); fw.close(); }catch(IOException ex){ ex.printStackTrace(); } Runtime rt = Runtime.getRuntime(); try { Process proc = rt.exec(dumpCommand); InputStream in = proc.getInputStream(); InputStreamReader read = new InputStreamReader(in,"latin1"); BufferedReader br = new BufferedReader(read); BufferedWriter bw = new BufferedWriter(new FileWriter(tst,true)); String line=null; StringBuffer buffer = new StringBuffer(); while((line=br.readLine())!=null){ buffer.append(line+"\n"); } String toWrite = buffer.toString(); bw.write(toWrite); bw.close(); br.close(); } catch (IOException e) { e.printStackTrace(); } } public static void main(String args[]){ export(); } And this is the output in the file: -- MySQL dump 10.11 -- -- Host: localhost Database: LanceLicensing -- ------------------------------------------------------ -- Server version 5.0.45-community-nt /*!40101 SET @OLD_CHARACTER_SET_CLIENT=@@CHARACTER_SET_CLIENT */; /*!40101 SET @OLD_CHARACTER_SET_RESULTS=@@CHARACTER_SET_RESULTS */; /*!40101 SET @OLD_COLLATION_CONNECTION=@@COLLATION_CONNECTION */; /*!40101 SET NAMES utf8 */; /*!40103 SET @OLD_TIME_ZONE=@@TIME_ZONE */; /*!40103 SET TIME_ZONE='+00:00' */; /*!40014 SET @OLD_UNIQUE_CHECKS=@@UNIQUE_CHECKS, UNIQUE_CHECKS=0 */; /*!40014 SET @OLD_FOREIGN_KEY_CHECKS=@@FOREIGN_KEY_CHECKS, FOREIGN_KEY_CHECKS=0 */; /*!40101 SET @OLD_SQL_MODE=@@SQL_MODE, SQL_MODE='NO_AUTO_VALUE_ON_ZERO' */; /*!40111 SET @OLD_SQL_NOTES=@@SQL_NOTES, SQL_NOTES=0 */; As you can see no create tables or insert statements. Could some one help me with this. P.S. i have this command mysqldump databasename -h host -u user --password=password database.sql Is there a way that i can dump the database without using the password? Because if i use this command mysqldump databasename -h host -u user -p database.sql the application will wait for the password.

  • RELEVANCY SCORE 2.26

    DB:2.26:Dreamweaver Cc Compatibility kp



    Is DWCC compatibile with MACOS 10.6.8? DWCC crashes every time I attempt to open an existing DW6 document. When attempting to create a Fluid Grid layout, the following error message is displayed:

    "An internal error occured while resizing a view. (CView::ResizeFrameBy)

    Thanks!

    DB:2.26:Dreamweaver Cc Compatibility kp


    No. 10.7 through 10.8 only.

    http://www.adobe.com/products/dreamweaver/tech-specs.html

  • RELEVANCY SCORE 2.26

    DB:2.26:Question About Ram?? 97


    I have a XPS Gen4 with 4gigs of pc5400. Would I be better off to replace 2 of those 1 gig sticks with 2 512 sticks even though the 512's are only pc4200?? I ask becaues I see that only three gigs are being used and so I am not sure if I would do better to have 2 1gig sticks and 2 512 sticks working in tandem instead of what I have now.

    DB:2.26:Question About Ram?? 97

    XPS400 2.8Gig 820 D Dual Core -VIIV
    O/S WinXP Media Center Edition 2005
    2G.B. DDR2 RAM 533MHZ-4x512M.B.
    Samsung Hard Drive 250G.B. 7200RPM
    ATI 128M.B.HYPER Mem PCI-E X16 X300SE.DIM
    ATI TV Wonder Elite PCI
    19 FP
    Sigma-Tel Intergrated Audio 7.1 channel
    Logitech G15 Keyboard
    DVD-/+RW DVD-ROM
    Pertelian X2040 ForeSight Systems LCD information Display
    Dell 944 AIO Printer

  • RELEVANCY SCORE 2.26

    DB:2.26:Commportidentifier 11


    I have a question about CommPortIdentifier(Serial port communication).
    Is this a good forum for such a question? If not, does anyone know where
    those topics are discussed?

    Thanks.

  • RELEVANCY SCORE 2.26

    DB:2.26:My Posts Dissapearing? 3p



    I have been posting a question about launchers, and rooting last 3 days those posts are vanishing? why is that?







    Solved!
    Go to Solution.

    DB:2.26:My Posts Dissapearing? 3p


    Sure,that filter is still learning.




    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • RELEVANCY SCORE 2.26

    DB:2.26:Memory Allocation And Boot Camp fx


    I bought my iMac a couple of weeks ago, so I'm still getting used to it. I have a lot of files here that are only for Windows based machines and now am thinking about installing Boot Camp to use them. My question involves memory.

    My iMac (apparently) comes with 250 GB of hard disk storage and according to the Apple home page I can purchase an optional drive of 500GB. Question: Would that extra memory be a card that I insert into the iMac does it refer to an external drive?

    For me this is important because if I chose to install Boot Camp I'll need to repartiton my hard drive and I'm worried about decreased performance for my Mac software.

    Second question is for those of you who do use Boot Camp: Is it worth it and how much space did you use for your partition?

    Thanks,
    ct

    DB:2.26:Memory Allocation And Boot Camp fx

    Hi Steven,

    as Axel already pointed out:

    Mac OSX can be booted from external HDs.
    Windows can not. (It's Microsofts wish to not allow this...).

    Have fun

    Stefan

  • RELEVANCY SCORE 2.26

    DB:2.26:Question About Keyboard 3f


    I don't see the Chinese tradition handwriting keyboard it used to have under 'keyboard', is it true?

    DB:2.26:Question About Keyboard 3f

    Oh, My mistake, It's was already on my added list, That's why I didn't see it.. Thanks guys

  • RELEVANCY SCORE 2.25

    DB:2.25:Draw A Line On Mouse Movement xs



    Two options that come to mind are Vectrocity or Unity built in LineRenderer. Both can be scripted (For line renderer - look here).


    In this question SirVictory said about how he used Vectrosity: For those who have vectrosity, look at the Draw Lines Touch script as a ref, that's how my line is drawn. So try and look it up. It sounds like it helped him a lot.

    DB:2.25:Draw A Line On Mouse Movement xs


    Since Cyb3rMakiak mentioned it, here's the DrawLinesTouch script with a few changes so it works with mouse input instead. Requires Vectrosity to actually work, of course...it could be adapted to work with the LineRenderer, but it would need some reworking since the LineRenderer only does the Vectrosity equivalent of continuous lines, rather than the discrete lines used here. (Essentially discrete line segments are used so the unused parts of the array aren't drawn. It's possible to do that with a continuous line, but it requires some fiddling with line segment colors involving transparency. Either that or you have to continuously resize the array and the line, which is not so good for performance.)


    var lineMaterial : Material; var maxPoints = 300; var lineWidth = 2.0; var minPixelMove = 5; // Must move at least this many pixels per sample for a new segment to be recorded private var linePoints : Vector2[]; private var line : VectorLine; private var lineIndex = 0; private var previousPosition : Vector2; private var sqrMinPixelMove : int; private var canDraw = false;


    function Start () { if (maxPoints%2 != 0) maxPoints++; // No odd numbers linePoints = new Vector2[maxPoints]; line = new VectorLine(DrawnLine, linePoints, lineMaterial, lineWidth); sqrMinPixelMove = minPixelMove*minPixelMove; }


    function Update () { var mousePos = Input.mousePosition; if (Input.GetMouseButtonDown(0)) { Vector.ZeroPointsInLine(line); previousPosition = mousePos; lineIndex = 0; Vector.DrawLine(line); canDraw = true; } else if (Input.GetMouseButton(0) (mousePos - previousPosition).sqrMagnitude sqrMinPixelMove canDraw) { linePoints[lineIndex++] = previousPosition; linePoints[lineIndex++] = mousePos; previousPosition = mousePos; if (lineIndex = maxPoints) canDraw = false; Vector.DrawLine(line); } }

  • RELEVANCY SCORE 2.25

    DB:2.25:Re: Question About System.Out And System.Err - Related To Pipe Broken Exception mj


    I have written a console window which redirects the out and err streams to 2 PipedOutputStreams, which in turn are connected to 2 PipedInputStreams used in 2 new separate threads.Why? Why can't those threads read/write the out and err streams directly? What are you trying to accomplish with all this?

    DB:2.25:Re: Question About System.Out And System.Err - Related To Pipe Broken Exception mj

    Because the PipedInputStream objects are used in indefinite while loops, whose threads cannot be dead unless I tell them to, I'm thinking the other ends of the pipes are the culprits.

    Sometimes one needs to swallow mysteries and move on, despite the fact that they bug...

  • RELEVANCY SCORE 2.25

    DB:2.25:Question About Pre-Orders With Certificates - Best Buy: Unboxed pd



    If I pre-order with a gift certificate are those used right away or do they not apply until the order is shipped?







    Solved!
    Go to Solution.

    DB:2.25:Question About Pre-Orders With Certificates - Best Buy: Unboxed pd

    You are very welcome. If you have any My Best Buy related questions in the future, then please do not hesitate to post to the forum or send me a private message by clicking on the blue button in my signature.

    Take care!




    Derek|Social Media Specialist | Best Buy® CorporatePrivate Message

  • RELEVANCY SCORE 2.25

    DB:2.25:L7 Pitch Correction Pluggin Question ? 39


    To those whom have used the melodyne and autotune. How does L7 pitch correction pluggin compare to those two items?

    DB:2.25:L7 Pitch Correction Pluggin Question ? 39

    Thanks guys. I've been leaning towards Melodyne. Much appreciated!!!

    RD

  • RELEVANCY SCORE 2.25

    DB:2.25:I Just Wanted Dreamweaver 9p



    All I wanted to do was use DW but I had to buy creative cloud when I did I was under the impression that I had to subscribe for 12months then I got to keep the DWcc. I thought the subscription was purely for the extras to do with the 'creative cloud ' which I don't use or want. So I cancelled my subscription and now I get a warning in DW that if I don't renew I lose the use of DW and I asked that very question of one supplier I contacted before purchase.. As far as I concerned all this is the final straw for me after 15 years of using DW, I've started winding down my business. I'm really disappointed. DW isn't anywhere near as good without the server behaviours which was the reason I started using DW in the first place and I have to buy expensive extensions to do stuff that was part of the software and if I have to pay a subscription is way more expensive.

    DB:2.25:I Just Wanted Dreamweaver 9p

    I was given the impression from an adobe supplier that the subscription was for crative cloud extras and once I had paid for 12months I got to keep DW and could drop the subscription.

    You were either given incorrect information or you misunderstood what you were told.

    Creative Cloud subscriptions are rent only. You never own the software. You sign up for a membership which gets auto-renewed each month or year (depending what you sign up for) unless you cancel.

    If you want to pay once and own the software, CS6 is the last verison which offers that option. It's 3 years out of date and no longer being developed (so no more upgrades - it's the last of its kind).

    Creative Suite 6

  • RELEVANCY SCORE 2.25

    DB:2.25:Y580 Upgrading Hard Drive Question k7


    Hello everyone,I own a lenovo Y580 ideapad with a 500GB 7200rpm hard drive. Unfortunately I have outgrown this hard drive and I have decided to replace with something a little more robust. I was thinking about this hard drive "Hitachi GST Travelstar 0S03563 1TB 7200 RPM 32MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive"My only concern at this point is how to transfer over my windows 7 OS (I don't care about my personal files, I can replace those easily). I was wondering if the OneKey recovery can be used to make a backup DVD which can be used to install the OS on the new hard drive? Failing this, how do I transfer my OEM windows 7 OS to the new hard drive?Thank you

    DB:2.25:Y580 Upgrading Hard Drive Question k7

    Also, would ordering a set or recovery discs from Lenovo fix this problem?

  • RELEVANCY SCORE 2.25

    DB:2.25:Question About Space kc



    Hi all,

    I've been reading around and some other people had this problem but I don't think anyone's found a solution:

    For a while if you deleted files via USB the space the file taken up by the file would sitll be used up in the playbook. Ex. If I deleted a 1.5 GB movie my remaining space on the playbook would be 14.5GB and there's no clear recycle bin to clear. I've tried searching through all the folders (with hidden files shown), using the desktop manager as well as doing a media + security wipe but it seems like there's always 4 GB being used by these hidden files - which my apps shouldn't become close to that. Can anyone clarify if it's possibly the OS or is there any way to clear those files?

    (I have 1.5 GB as my set aside as my reserved space)

    Thanks all!

    DB:2.25:Question About Space kc


    When you look at a drive in windows it will ead the bytes in a hex value and convert to decimal and both dont add up right.

    There could be some protected storage that playbook uses and thats what the 3 gig is for. maybe it uses a swap file of some sort.




    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs upClick to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.

    SIM Free BlackBerry Unlocking FAQFollow me on Twitter @knottyrope

    Want to thank me? Buy my KnottyRope App here

    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • RELEVANCY SCORE 2.25

    DB:2.25:Design Patterns In J2se p8


    Dear friends,

    i have a question in design pattern..... how many design pattern are used in J2SE..? and those design pattern name..?

    Thanks
    boss134

    DB:2.25:Design Patterns In J2se p8

    Well, there are at least two I can think of, which is the

    a) Strategy Pattern (see java.util.Comparator)
    b) Iterator Pattern (see java.util.Iterable, java.util.Iterator)

    to give you a start... I think I've seen some chart on the net which displays all of the design patterns present in J2SE...

  • RELEVANCY SCORE 2.25

    DB:2.25:Question About Citrix p8



    I was looking around my computer today and noticed a few items from citrix on there.I know what citrix is used for.But can anyone tell me why those files would be modified as recentely as today.I have not used system support for months.Here is a screen shot.

    Thanks newjack

    DB:2.25:Question About Citrix p8


    Have you looked at the image below in my last post?Also what server is it trying to connecting to?There is no application.That does`nt really make sense to me.Also when a Mcafee customer does a remote session.Do we not have to OK the citrix application? Thanks newjack

  • RELEVANCY SCORE 2.25

    DB:2.25:Bps Cubes jz



    Hello,

    I have a question about BPS- Planning workbench. When we go to /nBPS0 on the left panel we have a whole lot of SAP delivered cubes in Planning area. Can someone tell me when are these cubes used like in what scenarios ( the technical names of all the cubes start with 4*.. ). are those generated cubes or something.

    Please give some advice.

    Thanks in advance

    DB:2.25:Bps Cubes jz


    Hi Bhanu,

    Thanks for the link it was very good and informative.

    Actually I had gone through all these terms, but still was getting confused about the questions I was asking I guess again because the cube icon that i was seeing there. But i have read through the link and some other dics ihave if i have any other questions I will come back.

    Thanks again

  • RELEVANCY SCORE 2.25

    DB:2.25:Question About Hot Rollers xk


    I picked up a vintage hot roller set at an estate sale and would like to list it on eBay but a couple of questions first, since I've never used these myself.

    Is it normal for the machine to have a bit of a "hot" machine smell as it heats up? (I remember the same kind of smell whenever my sister and I would play with toys like Incredible Edibles -- remember those?) But I don't know if that's normal and to be expected with these hot roller sets, or whether it's a sign of a problem.

    Secondly, how difficult is it for someone to find replacement clips? Are those fairly common and readily available elsewhere?

    Thanks!

    DB:2.25:Question About Hot Rollers xk

    Seller's Central might be a good place for you to check out on some of these questions. I have seen replacement clips in the dollar store.

    Happy International Women's Day~03/08/2010!

  • RELEVANCY SCORE 2.25

    DB:2.25:Some Stupid Question About My External Hard Drive kf


    Ive got a Maxtor plus external hard drive and it have Dual FireWire (IEEE 1394) and USB 2.0 interfaces, am I able to connect for example an other firewire hard drive to one of my Maxtor port? or for what are those 2 ports used? I mean I only use one, whats the other for?

    Thanks

  • RELEVANCY SCORE 2.25

    DB:2.25:Disappearing Text In Dwcc 3a



    I have text highlighted in code or split view. When I switch to another application and back to DWCC 13.1 in OS X the text disappears. There is a quick flash of the Code Navigator icon before it's gone. If the cursor is in a word, the next letter is underlined after switching out and back. This happens in multiple documents after a restart. It seemed to start after Mavericks. Or is this some benighted new feature?

    DB:2.25:Disappearing Text In Dwcc 3a


    Hello Xarmour,

    Can you please share more informaiton on the issue as I am unable to reproduce the bug you are facing.

    - Is the issue specific to a document? If yes, can you share a sample document.

    - Can you try if the issue is still reproducible after turning off Tag Highlighting. You can follow the below steps to turn it off.

    Open Preferences window by pressing Cmd+U

    Navigate to Code Coloring category

    Uncheck the checkbox for Tag Highlighting in the bottom of the window

    Apply and close the window

    You can contact me at yprasad_@_adobe_._com(Please ignore the underscores. They are added to avoid spam bots).

    Regards,

    Yalpi Shiva Prasad

  • RELEVANCY SCORE 2.25

    DB:2.25:Problem With Dwcc And Discontinued Server Behavior j8



    Hi,

    I have a big problem with the discontinued server behavior extension.

    I put the files in the _mmServerScripts folder inside the site root like is explained in this video http://helpx.adobe.com/x-productkb/policy-pricing/dreamweaver-cc-server-extensions.html

    but some time (not all the time) when I open the table tree view in the DataBase panel inside Dw this files are deleted and Dw cannot show the tables I have in my Database.

    There is a solution to this problem?

    Thanks

    Gianluigi

  • RELEVANCY SCORE 2.25

    DB:2.25:Where Is The Record Update Form Wizard In Dwcc? x7



    Trying to follow online help but it doesn't relate to DWCC. A tutorial I found for CS6 suggests that it's in Insert Data Objects Update Record Record Update Form Wizard but in DWCC there is no "Data Objects" option in the Insert menu.

    By the way, I'm looking for the wizard not the straight Update behaviour which I'm aware is in the Server Behaviours panel.

    Thank you.NJ

    EDIT: Just spoke to Adobe "support" by chat about this and they were absolutely useless. The directed me to the article that I've highlighted above as being for CS6, which isn't helpful because "Data Objects" isn't in the Insert menu in DWCC, and when I pointed that out they gave me this link to try: http://www.adobe.com/devnet/

    Seriously? Is this the best I can hope for from Adobe support? It was clear that the operative was just doing Google searches for the answers as opposed to actually knowing the software that they represent. Really disappointing support.

    DB:2.25:Where Is The Record Update Form Wizard In Dwcc? x7


    Please show me who deleted person/programmer Record Insertion Form Wizard from DWCC, because I have got some good words

    I can install DW6 and I can create web form in this version, isn't it ?

    Yes, it is cleverly

    Adobe MUST show alternative way for doing web forms automatically.

  • RELEVANCY SCORE 2.25

    DB:2.25:Question About Importing Pictures k7



    I have labeled folders in iPhoto. How do I import those folders into the Organizer of Elements 11?

    DB:2.25:Question About Importing Pictures k7


    If they are albums or events, they should import into organizer when you use the import from iphoto command. Note that this command assumes you're done with iphoto and makes copies of all your iphoto images. The big question is why you want to use organizer if you are using iphoto. If you want to stop using iphoto, that's fine, but don't try to use both. You're just making double the work. It's a good idea to make a small catalog to try organizer, but eventually you should choose one or the other.