• RELEVANCY SCORE 3.65

    DB:3.65:Unable To Log Into Virtual Center p8





    I'm getting an error trying to log into VC -- Cannot connect to host ..... ; No connection could be made because the target machine actively refused it. Also on the host itself, the VMWare Virtual Center Service starts and stops right away ..... Anyone seen this problem

    DB:3.65:Unable To Log Into Virtual Center p8


    (Edit: Redundant message. It helps if you read ALL the replies before responding Sorry about that. I'm leaving my input for reference.)

    As per VBDINO, you need to take a look at the VirtualCenter logs to determine what is going wrong here. The most common cause is usually database connectivity issues, but port conflicts are also a possibility (though less likely if the installation worked before.)

    The logs are stored in C:\Windows\Temp\vpx. Look for the log file with the latest timestamp - the one with the highest "number" isn't necessarily the latest. There should be an error message towards the end of the log file.

    If the error message is related to the database (typically, anything that includes the word "ODBC"), make sure that the SQL instance hosting the VC database is up and running.

    (Note that if you're using VC 2.5, the log files are located in C:\Documents and Settings\All Users\Application Data\VMware\VMware VirtualCenter\Logs.)

  • RELEVANCY SCORE 3.64

    DB:3.64:Virtual Center 1.2 Is On A Windows Xp Workstation 7d




    Trying to use vmware converter on a virtual center 1.2 running a winXP pc with service pack 1 installed. ESX servers in the virtual center are all 2.54. Trying to convert the virtual machines to a virtual center 2.01. The error I get is:

    Managed source/destination (ESX/VC) host not found. Please verify that you have a VC/ESX server listening at that address and port. You may use lt;hostnamegt;:lt;portgt; to connect to a host on a port other than 443.

    Any ideas

    DB:3.64:Virtual Center 1.2 Is On A Windows Xp Workstation 7d


    We are building a new virtual center 2.0.2 update 1. Would there be a problem having 2 virtual centers both 2.0.2 on the same subnet?

  • RELEVANCY SCORE 3.57

    DB:3.57:Unreachable Host When Trying To Connect To Console Remotely jk





    I have a host on a private IP Address, managed by a Virtual Center Management Server. Im trying to remote into the Virtual Center Server through the Virtual Center Client. This works when I open up the port 905 on my firewall. And Im able to view the VMs and the hosts managed by it too.

    But when I try to connect to the consoles of the VMs, it gives me an error saying "Cannot connect to host. The Socket operation was attempted to an unreachabl host"

    I even tried setting

    vmauthd.server.alwaysProxy=TRUE

    at

    C:\Documents and Settings\All Users\Application Data\VMware\config.ini

    And also opened up ports 902 on my firewall.

    Im not sure what the problem could be now. Im really unable to proceed further due to this. Please let me know if there is a soluteion for this.

    Thanks

    DB:3.57:Unreachable Host When Trying To Connect To Console Remotely jk


    When the VC Client tries to connect to the VMWare Server through the VC Server (v1.4), it opens another TCP session where it tries to connect to the VMWare server (on the private IP) directly, as :902. THis is something I hoped to avoid through the settings "vmauthd.server.alwaysProxy=TRUE".

  • RELEVANCY SCORE 3.54

    DB:3.54:Virtual Center Re-Install 18



    I had an issue that caused the re-install of the Virtual Center. Belonging to this Virtual Center were 4 ESX servers configured with HA, DRS, Cluster, Resource Pools. After the re-install adding the hosts back into the configuration the 4 ESX hosts are complaining about what seems like tombstone Resource Pools. Each host respectively has a Resource Pool on it that isn't reflected in the Virtual Center configuration. These Resource Pools have nothing in them and cannot be deleted. Below is the error message that occurs when trying to delete and is occuring over and over.

    Error during the configuration of the host: Can not deletenon-empty group: pool6.

    Any ideas?

    DB:3.54:Virtual Center Re-Install 18


    I had an issue that caused the re-install of the Virtual Center. Belonging to this Virtual Center were 4 ESX servers configured with HA, DRS, Cluster, Resource Pools. After the re-install adding the hosts back into the configuration the 4 ESX hosts are complaining about what seems like tombstone Resource Pools. Each host respectively has a Resource Pool on it that isn't reflected in the Virtual Center configuration. These Resource Pools have nothing in them and cannot be deleted. Below is the error message that occurs when trying to delete and is occuring over and over.

    Error during the configuration of the host: Can not deletenon-empty group: pool6.

    Any ideas?

  • RELEVANCY SCORE 3.52

    DB:3.52:There Are Not Enough Licenses Installed To Perform The Operation - Add Host cs


    Hi,

    When I am trying to add host server on Virtual Center I got this message "There are not enough licenses installed to perform the operation". I believe we have enough licences, I can see the following contents in my licenece file (VMware_VC_DC1.lic):

    'Licencetype=Server'

    VMware ESX Server Standard Virtual SMP = PROD_ESX_FULL

    VirtualCenter Management Server = PROD_VC

    VirtualCenter Management Agent for ESX Server = VC_ESXHOST

    VMware VMotion = VC_VMOTION

    VMware HA = VC_DAS

    VMware DRS = VC_DRS

    and when I check the licence file on Server-based License File CheckerI found this error message "ERROR: No ESX Server host licence(s) found". Can any one please help me to solve this issue. PLease let me know if you need more information regarding this issue.

    regards,

    Siraj

    DB:3.52:There Are Not Enough Licenses Installed To Perform The Operation - Add Host cs


    Hello,

    Moved to the ESX 3.5 forum

    Best regards,

    Edward L. Haletky VMware Communities User Moderator, VMware vExpert 2009, url=http://www.virtualizationpractice.comVirtualization Practice Analyst[/url]Now Available: url=http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere(TM) and Virtual Infrastructure Security: Securing the Virtual Environment'[/url]Also available url=http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise'VMWare ESX Server in the Enterprise'[/url][url=http://www.astroarch.com/wiki/index.php/Blog_Roll]SearchVMware Pro[/url]|url=http://www.astroarch.com/blogBlue Gears[/url]|url=http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_LinksTop Virtualization Security Links[/url]|url=http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_PodcastVirtualization Security Round Table Podcast[/url]

  • RELEVANCY SCORE 3.51

    DB:3.51:Listing The Virtual Center For A Given Host ja



    Ok, I am sure I am missing something very easy here so I will throw it out and see if any one can help.

    I am trying to do a report on my hosts listing number of processor sockets, cores, virtual machines, parent cluster, and parent virtual center.

    I can't for the life of me figure out how to find the virtual center.

    I am connecting to multiple virtual centers like this connect-VIServer -Server Denver.myorg.com,Chicago.myorg.com, Savannah.myorg.com

    DB:3.51:Listing The Virtual Center For A Given Host ja


    Hello-

    Mm, not quite. In the hash table that is the calculated property, there are two (2) key/value pairs. Like:
    KeyValuenvCentere{($_.ExtensionData.Client.ServiceUrl -replace "http[s]?://", "").Split("/")[0]}

    These are used to create a new property for the returned object in the Select-Object statement. Since the VMHost object that is being passed to Select-Object does not have a property named, "vCenter", we can create such a property via a calculated property.

    As for the key names, "n" and "e". Those are pre-determine key names: they are short for "name" and "expression". So, the value associated with the "name" key is used for the name of the new property being created. And, the value associated with the "expresssion" key is used to set the value in the returned object of the newly created property, in this case called, "vCenter".

    Here's an attempt to illustrate, using a different example:

    First, just a normal Select-Object statement with normal properties, no calculated properties:

    PS C:\ Get-Item c:\windows | Select-Object Name,LastWriteTime

    Name LastWriteTime

    ---- -------------

    windows 4/30/2013 11:21:53 PM

    But, let's say that, for some reason, you wanted a property named "LastWriteYear" that holds the value of the year field of the last write time of the given item. Using a calculated property, you can add such a property, like:

    PS C:\ Get-Item c:\windows | Select-Object Name,

    LastWriteTime, @{name="LastWriteYear"; expression={[int]$_.LastWriteTime.ToString("yyyy")}}

    Name LastWriteTime LastWriteYear

    ---- ------------- -------------

    windows 4/30/2013 11:21:53 PM 2013

    So, in the second example, a new property that did not already exist on the selected item is created: its name is, "LastWriteYear", and its value is gotten by the script block in the "expression", which just takes the LastWriteTime property of the input object, and gets just the Year portion of the date/time item (then makes it an int).

    There are further examples on the web, like the post by Jason Helmick: http://www.jasonhelmick.com/2010/11/28/fun-with-calculated-properties-for-reports-2/.

    That help?

  • RELEVANCY SCORE 3.42

    DB:3.42:Unable To Add Esx Host To Virtual Center 202 c1



    Hi,

    I am unable to add ESX 301 to VC 202, giving error: Failed to install the VirtualCenter Agent service.

    Thanks,

    Sri

    DB:3.42:Unable To Add Esx Host To Virtual Center 202 c1


    Thanks Richard, Now i am able add ESX server to VC.

  • RELEVANCY SCORE 3.39

    DB:3.39:Vsphere Virtual Center cj



    Has anyone been successful in adding ESX 2.5.x to vSphere 4 virtual center. I am trying to do this in order to upgrade the VMs using upgrade vmotion.

    The first time the process stuck at 84% and failed. I tried twice aftger that and the process failed.

    The first attempt was with the short name, the second time with the FQDN, and the third time with the IP address of the ESX host.

    The error message received was:

    a general system error occured: internal error: vmodl.fault.host-communication

    Any suggestions would be apreciated.

    DB:3.39:Vsphere Virtual Center cj


    If I try to telnet to the host through port 902 this is what I get

    220 VMware Authentication Daemon Version 1.10: SSL Required

  • RELEVANCY SCORE 3.37

    DB:3.37:Cannot Add Esx Hosts To Virtual Center 83



    I have the Virtual Center installed in my laptop. When I attempt to add an ESX host of a customer network to it I receive the error message "Server Agent not responding". I connect to my customer using a VPN.

    There's no firewall blocking the port 902.

    Is there any restriction between Virtual Center and VPN connections ? If not, what would be causing the problem ?

    Thanks in advance.

    DB:3.37:Cannot Add Esx Hosts To Virtual Center 83


    That was exactly what I did. I seems to work only inside the network in this kind of case.

    I'll try a couple of things more.

    Thanks for your efforts.

  • RELEVANCY SCORE 3.36

    DB:3.36:Licences Needed To Add Esx Host To Virtual Center mj



    Hello,

    I am trying to add an ESX host to Virtual Center and get the following message: There are not enough licenses installed to perform the operation. We have dual processor blades so each ESX server needs 2 licences. I have 2 ESX server standard licences remaining so this should be ok. Do I need to have a Virtual Center Agent for ESX server licence also available in order to add the host to Virtual Center? We have 4 licences in total and these are all in use. Any ideas?

    Jenny

    DB:3.36:Licences Needed To Add Esx Host To Virtual Center mj


    You should only be using 1 VC Agent license per host[/b]. So you should only be using 2 VC Agents if you only have 2 hosts. You might try restarting the License Manager service on your VC Server to see if it releases those extra licenses.

    Also, which version are you on? ESX 3.0.0 and VC 2.0.0 had some issues in some environments of not releasing licenses after an ESX reboot and trying to redeem them again.

  • RELEVANCY SCORE 3.35

    DB:3.35:Ha Agent On Esxi Host In Cluster Nam In Gdc Virtual Data Center Has An Error: Cannot Complete The Ha Configuration Error 4/9/2013 7:18:47 Am Reconnect Host kp



    VMware cluster operational status shows me the below:-

    ESXi host : Secondary Role : HA Issue - HA agent on ESXi host in VMware cluster in the Virtual Data center has an error: Cannot Complete the HA configuration.

    Any help is highly appreicated!!!

    DB:3.35:Ha Agent On Esxi Host In Cluster Nam In Gdc Virtual Data Center Has An Error: Cannot Complete The Ha Configuration Error 4/9/2013 7:18:47 Am Reconnect Host kp


    is this the first time you are trying to configure HA on this Host or has it worked before ?

    I would suggest you to check from scratch follow VMware article

  • RELEVANCY SCORE 3.34

    DB:3.34:Configuration Of Host Ip Address Is Inconsistent: Address Resolved To 10.233.Xxx.Xxx And 10.233.Xxx.Xxx f3



    I am recieving the above error message when trying to enable HA on a particular hosts. The first IP is the SC of the host, and for some reason the host is also resolving an IP address of a Windows server. I am pulling my hair out trying to figure this out. The other host in this cluster is fine. No issue...

    Confirmed both ESX servers within the cluster have the exact same host file entries

    Both the servers in the cluster are in the host file correctly.

    Both servers are listed on the Virtual Center server's host file correctly as well.

    What am I missing?

    DB:3.34:Configuration Of Host Ip Address Is Inconsistent: Address Resolved To 10.233.Xxx.Xxx And 10.233.Xxx.Xxx f3


    Found the issue...the second IP that the ESX host was responding to was on the other ESX host. Must have over looked it 5-6 times...

  • RELEVANCY SCORE 3.31

    DB:3.31:Add Host (Esx 2.5.2) To Vc 2.0.1 Fails - Why? 9f



    Hi

    I have 3 esx 3.0.1 in my virtual center, and things are working just fine, but I want to add my old machine running esx 2.5.2 to virtual center, but when trying to add the host i get the following error message:

    Unable to access the specified host. It either does not exist, the server software is not responding, or there is a network problem.

    When the add host wizard runs it connects to my machine, it displays all my virtual clients, and the virtual networking is also displayed correctly.

    I would be really glad if someone could give me some help regarding this matter.

    DB:3.31:Add Host (Esx 2.5.2) To Vc 2.0.1 Fails - Why? 9f


    Someone told me this worked for him (Well I never test it and it doen't make too much sense to me) but you can try

    longin to VC -- administrator -- virtual center memanagement server configuration -- under license server -- uncheck change license server setting to match that veritual center server settings whenever add the host to virtual center

    then try it again.

    Please let me know the result. I want to know if that really works for esx 2.5.x servers

  • RELEVANCY SCORE 3.30

    DB:3.30:System Center 2012 Vmm, Cant Add A Virtual Machine Host a9


    This is being on a Win 2008r2 host, running as DC (hyperV enabled). On attempts to add the HOST this process fails on setp 1.2 [Install Virtual Machine Manager Agent] with the below error.
    The agent SCVMMService services are running.
    Error (2912)
    An internal error has occurred trying to contact an agent on the WinServ.ServDomain.com server: NO_PARAM: NO_PARAM. Cannot perform this operation on built-in accounts (0x8007055B)
    Recommended Action
    Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.yup

    DB:3.30:System Center 2012 Vmm, Cant Add A Virtual Machine Host a9

    Please check that thread
    http://social.technet.microsoft.com/Forums/en-US/virtualmachingmgrhyperv/thread/ede6687d-9e8c-4496-9ded-e87102b0c994Mohamed Fawzi | http://fawzi.wordpress.com

  • RELEVANCY SCORE 3.30

    DB:3.30:Vcb With Netbackup 5.1 8x



    Anyone have any luck getting this running? I have gone over the unclear documentation. I just get the in the pre command log:

    Unknown error: The system cannot find the file specified.

    Exit Code: -2147024894

    I'm wondering about the "HOST" param in the config.js file. We are running Virtual Center so I assume "HOST" is the Virtual Center server. We created a vcbadmin account on the Virtual Center servera and this is the account whose credentials we put in config.js.

    I would REALLY appreciate some guidance. Thanks

    Sean

    DB:3.30:Vcb With Netbackup 5.1 8x


    Still no luck here - opening up a call with both Symantec and VMwarae in the morning.

  • RELEVANCY SCORE 3.30

    DB:3.30:Trying To Connect To A Console Through Vc mj



    when trying to pull a console session through virtual center, i get the following error

    a connection attempt failed because the connected party did not properly respond after a period of time, or establish connection failed because connected host failed to respond

    i can rdp the server that i am trying to open in a console.

    DB:3.30:Trying To Connect To A Console Through Vc mj


    http://kb.vmware.com/vmtnkb/search.do?cmd=displayKCdocType=kcexternalId=749640sliceId=SAL_PublicdialogID=9204358stateId=0%200%209202144doctag=Author,%20KB%20Article

    here was the KB on this issue that fixed it

  • RELEVANCY SCORE 3.29

    DB:3.29:Error When Adding Host To Vc 2.5 1z



    I installed ESX server 3.5 and Virtual center 2.5

    I have already configured several Virtual machines on the ESX server and I can connect to the Esx machine without problems with the VI client.

    MY issue is that when trying to add this ESX host to my Virtual Center, I get the following error: Connection failed for 192.168.30.10, server agent is not responding.

    Both machines see each other They can ping each other, I can telnet 192.168.30.10 port 902 and get a reply but when I try to add it via the Virtual center GUI I get the error.

    I have restarted the vmware-ccagent by doing the kill-7 command and have also rebooted the ESX server, but without possitive results.

    any suggestions?

    DB:3.29:Error When Adding Host To Vc 2.5 1z

    Thank you, will download the correct verion and try again.

    regards,

    Frank

  • RELEVANCY SCORE 3.27

    DB:3.27:Problem Installing Vmware Virtualcenter ax



    When I am trying to install VC I get the following error:

    error 25036 VMware Virtual Center can be installed

    DB:3.27:Problem Installing Vmware Virtualcenter ax


    If you are just starting out, make sure you get the Quick Start Guide. Make sure you have the prerequisites satisfied and follow the guide. It should get you fixed up.

  • RELEVANCY SCORE 3.27

    DB:3.27:Problem With Virtual Center 9p



    i installed Virtual Center on my Physical XP machine

    it was successfully installed and i connected to my Virtual Center

    i am trying to add a host to my cluster

    at the end of adding wizard its prompting that there are no enough license.

    but i tried with different evalution licenses still i am getting the same prompt

    and my VC version is VC 2.0

    can any one help me out of this situation??????????????????

    DB:3.27:Problem With Virtual Center 9p


    In VC select your ESX Servre, goto Configuration tab, click licensed features..

    You should be able to see what your licensed for..

    If their isnt anything listed, click edit and work through all 3 sections..

    License source should be the VC itself..

    If your still getting "not enough license..."

    you may need to check the .lic file, sometimes its get corrupt, or it doesnt get created properly.. you can launch the licsence admin tool and re-read etc..

    good luck..

  • RELEVANCY SCORE 3.27

    DB:3.27:Problem During V2v Convertion. 7z


    Hi,
    I'm trying to convert a virtual machine from ESX host using Virtual Center integration to HyperV using SCVMM. I unistalled the VMWare tools and shutdown the virtual machine. The converstion process terminates with exceptions andI have two errors:
    1- The server %VMHostName; does not have an HBA which supports NPIV. This message I get from Select a host for virtual machine screen;
    2- Virtual Machine Manager is unable to update the operating system of the source VMware virtual machine vmtest1. The operating system, file system, or disk layout
    is not recognized.
    What I can see from this error is that HyperV is trying to convert a virtual machine from ESXthrough the SAN layer.I don't know if this a limitation but
    I think to get the conversiton of the disk successfull I have to present the same LUN to both servers (ESX and HyperV).Does anyone know how can I fix this problem? Is there any option on SCVMMto use only the network instead? I found this linkbut
    it only says to usetheLAN to copy:
    http://social.technet.microsoft.com/wiki/contents/articles/virtual-machine-manager-vmm-2008-r2-error-codes-1000-1499.aspx.
    Thanks in advance,
    Giancarlo.

  • RELEVANCY SCORE 3.26

    DB:3.26:Virtual Center Times Out When Adding New Host mj



    running esx 3.0.2, vc2.0

    when attempting to add an esx host to a cluster, VC times out with non-descript error.

    am able to ping between VC and ESX host, have hosts file config'd to resolve esx host on VC, can telnet to required ports on esx host (902, 903, etc..),

    have rebooted both VC and ESX Host...

    what am i missing???

    Bruce

    DB:3.26:Virtual Center Times Out When Adding New Host mj

    thanks.

    we found the problem...when esxhost was built, vlan id's were created, but the VC (windows machine) was not in the vlan...

    bruce

  • RELEVANCY SCORE 3.26

    DB:3.26:Failed To Install/Upgrade Vmware Virtualcenter Agent sa



    History: An end user here added his GSX 3.2 host to VC 1.4, he then Disconnected from VC1.4 and tried adding it back to VC 1.3 as a host. Is this supported?

    Error trying to add the host to VC 1.3

    = "Connection failed for XX.XX.XX.XX: Failed to install/upgrade VMWare VirtualCenter Agent"

    Is this expected?

    Is there a way to downgrade the Virtual Center Agent on the GSX Host so it can be added back to VC 1.3.

    Thanks,

    S

    DB:3.26:Failed To Install/Upgrade Vmware Virtualcenter Agent sa


    Since you had VC 1.4 installed and you went back to VC 1.3. Your GSX server most likely now has a version of vmware-serverd that is not compatible with GSX VC 1.3

    I recommend that you uninstall GSX and manually remove any files left in /usr/bin /usr/sbin /usr/lib/vmware..etc that the uninstall may have not have removed.

    Skip the above step if GSX is on Windows host.

    Now reinstall GSX and see if you can add it back to VC 1.3

    The uninstall of GSX will not delete any VM's

  • RELEVANCY SCORE 3.26

    DB:3.26:Connecting Esx Host To Virtualcenter pd


    Hi Everybody,

    so im trying to connect ESX host to virtual center,

    ive created the new host with the ip address and everything

    but its disconnected and the configuration tab is blank.

    Everytime i try to connect it,

    it gives me an error message "not enough licenses installed to perform.."

    Im so stuck!

    can anyone help me please?!

    for any suggestion please explain step-by-step so i can try them all.

    Thanks!

    DB:3.26:Connecting Esx Host To Virtualcenter pd

    Hello shinjenni,

    There is a button in the License Server Tools to Re-Read the license file. Also, there should be a button to save License Server settings.

    Don't forget to use the buttons on the side to award points if you found this useful (you'll get points too).

    Regards,

    Harley Stagner

  • RELEVANCY SCORE 3.25

    DB:3.25:How To Rename Host In Virtual Center.... pp



    Do I just remove from Inventory then re add?

    DB:3.25:How To Rename Host In Virtual Center.... pp


    That's right, VM's can't run in maintenance mode. So the guests need to be shut down or moved.

  • RELEVANCY SCORE 3.25

    DB:3.25:Trouble Logging Into Virtual Center ad



    When trying to log into Virtual Center I'm getting the error "Cannot connect to local host: no connection could be made because the target machine actively refused it." We are using our domain admin account as the Virtual Center login. We recently changed that password when an employee left. Is the old password cached somewhere and needs to be reset? Any help would be appreciated.

    DB:3.25:Trouble Logging Into Virtual Center ad


    have a look at this

    http://www.ozvms.com/index.php?option=com_contenttask=viewid=78Itemid=9

    it looks as thought your service has stopped. this could be due to your database instance password being the old one. are you using integrated NT passwords for your sql database or SQL Logins, if the latter then open SQL manager and change the password for username that you use to access.

  • RELEVANCY SCORE 3.25

    DB:3.25:Failed To Get File By Network Copy. Reason: 7 fj



    What is the action I need to take when I receive this error message in Virtual Center 1.3.1?

    I have a template and was trying to deploy it using Virtual Center console.

    I had previously deployed the same template before to the same host and had no problems.

    The target host has 200g free. I also rebooted the host, retried and received the same error.

    Here is the full error message :

    Failed to deploy template "Win2000pro" on host gsx1. Reason: Failed to get file by Network Copy. Reason: 7 (Session termination requested = NfcFile_Receive: Server canceled receive)

    Thanks.

    DB:3.25:Failed To Get File By Network Copy. Reason: 7 fj


    Thanks. I don't recall if I was doing that or not but will watch for that.

    Could vmware provide a list of what the Network copy Reason errors are and what the preventable action is?

  • RELEVANCY SCORE 3.24

    DB:3.24:"No Licenses Were Found" When Trying To Add Host In Virtual Center. s8



    Hello,

    I recently added an ESX Server (2.5.1) to our environment and used an existing license (until my new ESX License purchase came through) for the setup. I have since received the purchased license and applied it to the MUI. These license settings were saved successfully in the MUI, but when I try to add the Host to Virtual Center, VC gives me an error message stating "No licenses were found". Has anyone seen this issue before?

    I've verified that the license files in /etc/vmware are correct.

    Any help would be appreicated!

    Tx, Don

    DB:3.24:"No Licenses Were Found" When Trying To Add Host In Virtual Center. s8


    Thank you Brian and djc for the help. I can see where the license needs to be added. One of my team members must have added the license keys in the past... I never knew

    D

  • RELEVANCY SCORE 3.23

    DB:3.23:"Cannot Connect To Host ....." x3


    Dear all,

    We are using VMware Virtual Infraestructure Client 2.0, and when we try to connect to the Virtual Center Server 2.0.2 we get a message "Cannot connect to host X.X.X.X: No connection could be made because the target machine actively refused it.

    We just have one Virtual Center Server in our local network.

    We review the services and their status is as follows:

    VMware License Server Started

    VMware Virtual Infraestructure Web Access Started

    VMware Virtual Mount Manager Extended Started

    VMware Virtual Center Server Is Continuously Restarting

    Also when we try to connect from the server that Virtual Center Server is installed the same error appear.

    There are no firewall installed in the server, No changes in username and password....

    Any ideas... how to solve it....???

    Thanks in advance....

    DB:3.23:"Cannot Connect To Host ....." x3


    Mike,

    Thanks a lot for your quick response,

    We review the firewall, and all ports were enable and there are not

    blocked ports.

    The service of Virtual Center Server was down and we can not get on line

    again, so we decide to make a new clean install of the Virtual Center

    Server.

    Again thanks for your help.

    Regards.

    Please do not print this email unless you really need to.

    "mike.laspina" communities-emailer@vmware.com

    28/02/2008 10:49 a.m.

    To

    roman.saavedra@jwt.com

    cc

    Subject

    New message: ""Cannot connect to

    host .....""

    ,

    A new message was posted in the thread ""Cannot connect to host ....."":

    http://communities.vmware.com/message/873225

    Author : mike.laspina

    Profile : http://communities.vmware.com/people/mike.laspina

    Message:

  • RELEVANCY SCORE 3.22

    DB:3.22:Not Able To Conect To Virtual Center zc


    haI

    While trying to conect to virtual center i get the following error

    Vmware Infrastructure client could not establish the initial connection with the server

    a connection failure occured.

    i have restarted the machine,all the services w.r.t. vmware in virtual center.

    Regards

    R.Ramji

    DB:3.22:Not Able To Conect To Virtual Center zc


    Hello,

    Moved to the VMware vCenter Server forum.

    Best regards,

    Edward L. Haletky VMware Communities User Moderator, VMware vExpert 2009, url=http://www.virtualizationpractice.comVirtualization Practice Analyst[/url]Now Available: url=http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere(TM) and Virtual Infrastructure Security: Securing the Virtual Environment'[/url]Also available url=http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise'VMWare ESX Server in the Enterprise'[/url][url=http://www.astroarch.com/wiki/index.php/Blog_Roll]SearchVMware Pro[/url]|url=http://www.astroarch.com/blogBlue Gears[/url]|url=http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_LinksTop Virtualization Security Links[/url]|url=http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_PodcastVirtualization Security Round Table Podcast[/url]

  • RELEVANCY SCORE 3.22

    DB:3.22:Not Able To Add New Host On Virtual Center Server 2.5 ap


    Hi I have upgrade my virtual center server from 2.0 to 2.5. I want to add my existing ESX 3.0 server on that virtual center server. After giving Host IP and its credetials i am getting error "Request Time out". I am able to ping the host from virtual center server. The licence parts seem OK.

    Can any one tell me the reason behind the error and solution for same.

    Thanks.

    vaibhav

    DB:3.22:Not Able To Add New Host On Virtual Center Server 2.5 ap


    Hi,

    Find the result of the cmds.

    1) vmware-cmd -l

    /usr/bin/vmware-cmd: Could not connect to server

    (VMControl error -14: Unexpected response from vmware-authd: 511-The process exited with an error:

    Incorrectly built binary which accesses errno or h_errno directly. Needs to be fixed.

    Can't open perl script "/usr/lib/vmware/serverd/init.pl": No such file or directory

    VMServerd Panic: Could not initialize Perl script handler.

    511 End of error message)

    2) free -m

    total used free shared buffers cached

    Mem: 262 250 11 0 10 129

    -/+ buffers/cache: 110 151

    Swap: 541 3 537

    3)df -h

    Filesystem Size Used Avail Use% Mounted on

    /dev/sda2 4.9G 4.7G 0 100% /

    /dev/sda1 99M 29M 66M 31% /boot

    none 132M 0 132M 0% /dev/shm

    /dev/sda6 2.0G 52M 1.8G 3% /var/log

    I am not able to connect to server from VI client from VC server. Its giving error for server response time out.

    Thanks

    Vaibhav

  • RELEVANCY SCORE 3.21

    DB:3.21:Unable To Contact The Specified Host (Servername). This Might Be Because That Host Is Not Available.... 7d


    I am getting the following error

    "Unable to contact the specified host (SERVERNAME). This might be because the host is not available on the network, there's a network configuration problem, or the Management services on the host are not responding.

    ESX host is a 3.0.2 build 52542. Virtual Center is running 2.5 update 4...Update 4 was just applied over the weekend.

    What I have tried so far:

    I can ping the VC server from the host having the issue by short name, FQDN and IP and vica-versa

    Stopped and restarted the vmware-vpxa agent as well as the mgmt-vmware agent

    Rebooted the host

    Restarted Virtual Center.

    Installed the upgrade VPXA agent locally on the host (Vmware-vpxa-2.5.0-147697)

    Removed the host from VC tried to add it back in

    Plenty of diskspace.

    None of this is working for me. This just happened, as I said, we applied Update 4 over the weekend. A colleague of mine was simply trying to register a VM to this host, and it went disconnect.

    Ideas...suggestions, up to about 3 hours ago it was FINE!

    DB:3.21:Unable To Contact The Specified Host (Servername). This Might Be Because That Host Is Not Available.... 7d


    I was recieving the same error and discovered that I didn't have file and printer sharing enabled and set as an exeption in the firewall. Once that was set I was able to continue normally. That may not be your situation but I hope that it may help others like me who's search ends up here.

  • RELEVANCY SCORE 3.21

    DB:3.21:Timeout Waiting For Response From Host c3



    I bounced my virtual center server for the first time in a long time. We currently have 2 ESX server hosts. Virtual center is getting "Timeout waiting for response from host" when trying to get to one of them. The host is up. All VM's seem to be OK. I can ping the host from the Virtual Center server. Any suggestions? Short of bouncing the ESX host anyway?

    DB:3.21:Timeout Waiting For Response From Host c3


    I got through to VMWare support. Aparently the

    dev/sda2 folder is full. It's 2.4GB. When I told

    them that the tech said "oops". It should be at

    least 10GB. Then why isn't that the default on the

    install!!!! I've deleted some log files in

    home/vmware and now Virtual Center is working.

    Now a biiger question, am I totally screwed? What is

    the best way to give it more space? I have a second

    server that I can Vmotion to and wipe the first one

    out but, will I have the same issue on the second

    server if I Vmotion them over?

    You're mostly screwed. Best solution is to ensure your environment is well documented and then rebuild the ESX host with the bad (defualt) partitioning. Yes, the out of box default partitioning leaves much to be desired and should be resolved in ESX 3. If you want proper partitioning, you must manually partition and follow VMware and real world best practices for /, /var, /home, /tmp, /vmimages, /boot, /vmkcore, and COS swap

    I have a third ESX server coming in in a few weeks.

    Can I set that one up correctly, Vmotion the VM's on

    ESX1 to that one, wipe out ESX1 and set it up

    correctly then, Vmotion back?

    Yep! Now is a good time to update your build document too.

    While you're at it, set yourself up good for the migration to ESX3 by creating a /boot partition of over 100MB instead of using the default of 50MB.

    Jas

  • RELEVANCY SCORE 3.21

    DB:3.21:My Host Esx Server Cant Connect To The Vmware Virtual Center 3c



    Hi

    I just intalled vmware virtual center and try to connect my esx box to it with valid username and password it gives me error that license doent exits any suggestion

    DB:3.21:My Host Esx Server Cant Connect To The Vmware Virtual Center 3c


    sorry my fault

    i used more than once use other key it worked

    thanks a lot

  • RELEVANCY SCORE 3.20

    DB:3.20:Get Virtual Center Or Host Name From Guest zd



    Hello guys,

    Could i get the Virtual Center or Host name from a Guest ?

    Thank you!

  • RELEVANCY SCORE 3.20

    DB:3.20:Removing Esx Host In 'Reconnecting' State From Virtual Center za



    Hi,

    I am trying to remove an ESX host that is in 'reconnecting' state in Virtual Center. The only problem is, the ESX server was accidently wiped and now unavailable to perform any tasks.

    Is there a way I can remove this?

    I have also posted this in VC forum. I was thinking this forum would provide a quicker response

    DB:3.20:Removing Esx Host In 'Reconnecting' State From Virtual Center za


    Interesting.

    It should have timed out - nice job finding the fix and thanks for posting back.

    Good Luck and Happy Virtualizations.

  • RELEVANCY SCORE 3.18

    DB:3.18:Migrate Accross Farms ax



    Is there a way to migrate accross Server Farms in virtual center? I currently have an ESX host that is a staging or testing farm and I need to migrate this to a production ESX server farm however Vrtual Center gives me an error when trying to migrate accross different farms.

    DB:3.18:Migrate Accross Farms ax


    I could've sworn I'd done a cold migration across to a different farm but cannot find it anywhere! I hope this feature comes, it's a shame to have to use SCP to manually push the VMDK's over, and re-register the VM.

  • RELEVANCY SCORE 3.18

    DB:3.18:Trying To Add A Host To Vi 2 cs



    when trying toi add a host to my virtual center server i get, failed to install virtualcenter agent service. i have over 150 license available

    thanks

  • RELEVANCY SCORE 3.17

    DB:3.17:Cannot Install Vcenter Agent Service. Unknown Installer Error ds



    I am getting this error while adding ESXI 4.0 host in Virtual center.

    Cannot install vcenter agent service. unknown installer error.

    After this error host showing disconnected.

    Please find error screenshot attached.

    Pelase help....

    DB:3.17:Cannot Install Vcenter Agent Service. Unknown Installer Error ds


    Your post has been moved to the ESXi forum.Dave

    VMware Communities User Moderator

    Now available - vSphere Quick Start Guide

    Do you have a system or PCI card working with VMDirectPath? Submit your specs to the Unofficial VMDirectPath HCL.

  • RELEVANCY SCORE 3.17

    DB:3.17:System Center Virtual Machine Manager Service Crashes When Trying To Add New Host a9


    Hello,
    System Center Virtual Machine Manager Service crashes when trying to add new host and console closes without warnings
    The only thing eventvwr shows:The System Center Virtual Machine Manager service terminated unexpectedly. It has done this 4 time(s).
    Firewall is fully disabled for testing purposes. Run As account granted administrator permissions.
    Where should i look?
    P.S - If agent installed locally, I canre-associateit with no problems, however server looses communication with it periodically and i cannot deploy new VMs.
    Host runs: Windows Server 2008 R2 SP1 Ent
    Thank You!

    DB:3.17:System Center Virtual Machine Manager Service Crashes When Trying To Add New Host a9

    If it helps, whole task crashes at 38%
    While Installing Agent is at its 16%

  • RELEVANCY SCORE 3.15

    DB:3.15:Migrating Virtual Machines To A New Host xj



    I am in the process of cold migrating to a new host using virtual center from esx 2.5 to and esx 3.0.1. I setup a new Network card in the ESX 2.5.1 server and created a virtual switch called it migrate and assigned it to that adapter. Went into the virtual machine that I am migrating and assigned it to the migrate network adapter. Through virtual center I have selected the virtual machine which is turned off and select "Migrate to new host" when it comes to the validation part I get an error Migration from 192.168.25.16(esx 2.5.1) to 192.168.25.23(esx3.0.1): Network Interface 'NIC 1' uses network 'migrate' which is not accessible. When I go into the properties of the ESX 2.5.1 virtual machine that i am trying to migrate there is the 1 network adapter which I assigned to migrate. Can you please point me in the right direction?

    DB:3.15:Migrating Virtual Machines To A New Host xj


    Create a "migrate" network on your ESX 3 host too then try again.

  • RELEVANCY SCORE 3.15

    DB:3.15:Error: The Are Not Enough Licenses Installed To Perform The Operation kx


    I installed the server of Virtual Center with a license file and he was active, it tried to add host esx and it appeared the error " the are not enough licenses installed to perform the operation" , try to activate the virtual center like server license, ended unavailable the license the virtual center y now is in mode evaluation, now not like returning and activating all the licenses, how activate the licenses de virtual center and the esx in the console?

    DB:3.15:Error: The Are Not Enough Licenses Installed To Perform The Operation kx

    You need a virtual center license in addition to your ESX licenses. You can connect the VC client direftly to ESX hosts without licensing VC but if you want to use VC you need a license for it. If you've purchesd one, you can consolidate your ESX and VC licenses to one file on the VMware licensing site.

    If it was useful, give me credit

    Jason White - VCP

  • RELEVANCY SCORE 3.15

    DB:3.15:Vm Ware Cause Blue Screen On Host sd


    Hey everyone, I keep trying to use vmware to run a virtual XP pro. It crashes my pc and gives me a blue screen of death. Here is the Event View log of the error. Event Type:Error Event Source:Service Control Manager Event Category:None Event ID:7000 Date:2/9/2008 Time:11:45:32 PM User:N/A Computer:XXXXXX Description: The Vstor2 P2V30 Virtual Storage Driver service failed to start due to the following error: The system cannot find the file specified. For more information, see Help and Support Center at [http://go.microsoft.com/fwlink/events.asp.] Anyone have any ideas?

    DB:3.15:Vm Ware Cause Blue Screen On Host sd

    if you xp pro x64, do not install .net 3.5 or servic pack 3 will crash you system when try install mvware server 2.0 or vmwork station.

    I have the same problem.

  • RELEVANCY SCORE 3.15

    DB:3.15:I Cannot Add The Host In The Virtual Center-Console. pp



    When i am adding the host in the Virtual Center-Console, i can see the summary settin from the host, all vms.

    But by Finish i response error.

    DB:3.15:I Cannot Add The Host In The Virtual Center-Console. pp


    yes ican the Virtual Center server from my ESX host service console

  • RELEVANCY SCORE 3.14

    DB:3.14:Error Trying To Add Esx To Virtual Center d7



    I have an 8cpu license w/ 4way smp license on an esx server. When I attempt to add the esx host to the Virtual Center, I get an error stating 'Connection failed for xxxx. Not enough CPU licenses'. Any one seen this. I've been searching to no avail. I thought I had the licenses covered.

    DB:3.14:Error Trying To Add Esx To Virtual Center d7


    Just a point of clearification..

    There are seperate licenses for

    GSX, ESX, SMP and VirtualCenter.

    VirtualCenter is licensed by CPU count by application (ESX or GSX).

  • RELEVANCY SCORE 3.13

    DB:3.13:Connection Frequently Droped 9z


    Hello

    I use the waitforupdates methode. While the thread stops to wait to receive a response the connectin is frequently droped. This is not the main problem, because I can handle it with a reconnect.

    The real problem starts after many subsequent reconnects. The Virtual Center refuses to accept any connection for some time. The error message is: " the request failed with http status 503: service unavailable."

    The problem can be verified trying to connect with the VI Client, the error message there: "The server could not interpret the client's request"

    A restart of the Virtual Center resolves the problem.

    I encountered already the same problem when I accessed the Virtual Center or Host subsequently with the VI-Toolkit.

    How can I solve the problem. Why is the connection always droped? Any solution to keep the connection alive?

    Regards

    Manfred

    DB:3.13:Connection Frequently Droped 9z

    Hello

    I use the waitforupdates methode. While the thread stops to wait to receive a response the connectin is frequently droped. This is not the main problem, because I can handle it with a reconnect.

    The real problem starts after many subsequent reconnects. The Virtual Center refuses to accept any connection for some time. The error message is: " the request failed with http status 503: service unavailable."

    The problem can be verified trying to connect with the VI Client, the error message there: "The server could not interpret the client's request"

    A restart of the Virtual Center resolves the problem.

    I encountered already the same problem when I accessed the Virtual Center or Host subsequently with the VI-Toolkit.

    How can I solve the problem. Why is the connection always droped? Any solution to keep the connection alive?

    Regards

    Manfred

  • RELEVANCY SCORE 3.13

    DB:3.13:How Dows Virtual Center Monitor Cpu? 7m



    We have HP OpenView running on our GSX (3.1) server (Windows 2003 SP1). It collects Windows performance counters (perfmon) at 5-minute intervals.

    When we look at CPU in OpenView it appears to have plenty of overhead.

    But if we look at Virtual Center, it shows several periods of sustained 100% utilization on the host over the same period (24 hours).

    Does Virtual Center measure CPU in a way that is more reliable than Windows perfmon counters (which OV collects)?

    Trying to figure out which tool (Windows counters, Virtual Center) is more accurate and if we have a problem or not.

    Thanks!

    DB:3.13:How Dows Virtual Center Monitor Cpu? 7m


    If you have the HPOV agent installed in the VMs then the metrics based on % (%CPU utilization for example) are not going to be accurate. See the whitepaper on timekeeping for some insight:

    http://www.vmware.com/pdf/vmware_timekeeping.pdf

    One option to get valid data is to use the HPOV SPI for VMware from nWorks: http://nworks.com/vmware/index.php

    This will get all the valid data into OpenView and also give you extensive reporting capabilities from within HPOV (if you use Reporter). If your goal is to get all metrics and reporting done from within HPOV then this SPI is a great way to go.

    Forgot to add, you could also compile the MIBs provided by VMware on HPOV, that should give more accurate data as well.

    Message was edited by:

    dpomeroy

  • RELEVANCY SCORE 3.13

    DB:3.13:Error Adding Win Server Technical Preview Host To Virtual Machine Manager Technical Preview s1


    I've built Win Server Preview (latest build 9888).Also build System Center Technical Preview, on another server (VM), and now trying to add Server Tech Preview hosts to VMM.
    However VMMService is crashing, with error below.
    Note I have tried multiple scenarios, including upgrade hosts from 2012 R2, install fresh as server Core, install fresh full-GUI hosts, enable Hyper-V before adding to VMM, allow VMM to enable Hyper-V...
    also RunAs user is administrator of hosts and VMM, computer accounts have been added to all administrator groups, WinRM quickconfig has been run, firewall is off..
    ..however VMM vNext refuses to add Server vNext hosts. (however - I can add Server 2012 R2 hosts to VMM vNext with no problem)
    NOTE - also, when Server Manager starts, I get Error occurred while loading the plug-in for 481. Exception has been thrown by the target of an invocation. After this the File and Storage Services node in Server Manager is missing. Not sure if
    this is related to the error below; but I get this issue in all servers built with latest .9888 build.

    Error from VMM server when trying to add Tech Preview host is as follows -
    VMM encountered a critical exception and created an exception report at c:\programdata\VMMLogs\abcdefg...etc.
    ----------------------------------------------------
    ------------------- Error Report -------------------
    ----------------------------------------------------
    Error report created 07/12/2014 21:04:59
    CLR is not terminating
    ----------------------------------------------------
    --------------- Bucketing Parameters ---------------
    ----------------------------------------------------
    EventType=VMM20
    P1(appName)=vmmservice.exe
    P2(appVersion)=3.2.9013.0
    P3(assemblyName)=Engine.Common.dll
    P4(assemblyVer)=3.2.9013.0
    P5(methodName)=Microsoft.VirtualManager.Engine.EngineFSUtils.GetVolumeIDFromVolumeName
    P6(exceptionType)=System.FormatException
    P7(callstackHash)=c5b5
    SCVMM Version=3.2.9013.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.9013.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.9013.0
    Base Exception Target Site=140719489075608
    Base Exception Assembly name=mscorlib.dll
    Base Exception Method Name=System.GuidGuidResult.SetFailure
    Exception Message=Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
    EIP=0x00007ffbe1396468
    Build bit-size=64

    ----------------------------------------------------
    ------------ exceptionObject.ToString() ------------
    ----------------------------------------------------
    System.FormatException: Guid should contain 32 digits with 4 dashes (xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx).
    at System.Guid.GuidResult.SetFailure(ParseFailureKind failure, String failureMessageID, Object failureMessageFormatArgument, String failureArgumentName, Exception innerException)
    at System.Guid.TryParseGuidWithDashes(String guidString, GuidResult result)
    at System.Guid.TryParseGuid(String g, GuidStyles flags, GuidResult result)
    at System.Guid..ctor(String g)
    at Microsoft.VirtualManager.Engine.EngineFSUtils.GetVolumeIDFromVolumeName(String volumeName)
    at Microsoft.VirtualManager.Engine.ImageLibrary.StorageDataHelper.CreateVolume(MSFT_Volume volume, MSFT_Partition partition, WsmanAPIWrapper wrapper)
    at Microsoft.VirtualManager.Engine.Adhc.SMStorageRefresher.GetVolumes(IVmmDbContext ctx)
    at Microsoft.VirtualManager.Engine.Adhc.WindowsHostDataProperties.PopulateProperties(IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.Adhc.WindowsHostAbstractionLayer.GetHostProperties(HostData oldHostData, Version agentVersion, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.GatherAllInformation(Host host, Object agentRefreshSyncObj, Boolean checkIfClustered, Boolean refreshEventCapabilities, String clusterName, Guid taskID, ITaskContext taskContext, IVmmDbConnection
    dbConnection)
    at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.RefreshLockedHost(Host host, Guid taskID, ITaskContext taskContext, Boolean checkClusterStatus, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostToResponding(Nullable`1 prevState, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostState(IVMComputerSystemSummary[] vmComputers, Nullable`1 prevState, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunLightRefresher(IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, Guid vmObjectId, VM tempVm, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VmLightRefresher.RefreshData(HostReference hostRef, Nullable`1 auditTaskId, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.RefreshDriver`1.c__DisplayClassa.RefreshThreadFunctionb__7(IVmmDbConnection _dbConnection)

    ----------------------------------------------------
    ------------------- Scope Trace --------------------
    ----------------------------------------------------
    [s#35e2a] HostRefresher.GatherAllInformation(host: (Host#[17c4]) { objLock = (CarmineObjectLock#[a41]) { lockType = Write, objectID = 4b67d6df-647f-4da3-a00f-12e52bdff947, objectType = VMHost, taskID = 1ee6c6db-a399-4033-ad4b-519c0d130f52, doNotRetryLock =
    (bool) True }, data = (HostData#[bcbb]) { id = 4b67d6df-647f-4da3-a00f-12e52bdff947, LastUpdatedTimestamp = 07/12/2014 18:04:04, Flags = AvailableForPlacement, HostGroupID = 0e3ba228-a059-46be-aa41-2f5cf0f4b96e, AgentServerID = 57f60b84-2997-4a25-b38e-56dc8dae19e4,
    OverrideHostGroupReserves = False, CPUPercentageReserve = 10, NetworkPercentageReserve = 0, DiskSpaceReserveMB = 10240, MaxDiskIOReservation = 10000, MemoryReserveMB = 2048, VhdPaths = (String[][-1]#1a4d96a) { }, VMRCEnabled = True, VMRCPort = 2179, SecureVMRCEnabled
    = False, VMRCCertificateAvailable = False, VirtualizationPlatformScheme = viridian://hvnext2-ak.dev.amust.local, SupportsLiveMigration = False, EnableLiveMigration = False, LiveMigrationMaximum = 0, LiveStorageMigrationMaximum = 0, UseAnyMigrationSubnet
    = False, MigrationSubnet = (String[][-1]#2d3a296) { }, MigrationSubnetUserManaged = (Boolean[][-1]#2d62b0c) { }, MigrationAuthProtocol = CredSSP, VirtualServerState = Unknown, VirtualServerVersion = (Version#fffff) 0.0, VirtualServerVersionState = UpToDate,
    IsDMZHost = False, UseCACert = False, IsNonTrustedDomainHost = False, UserName = , Password = password omitted, LogicalProcessorCount = 0, PhysicalProcessorCount = 0, CoresPerProcessor = 0, L2CacheSize = 0, L3CacheSize = 0,
    BusSpeed = 0, ProcessorSpeed = 0, ProcessorModel = , ProcessorManufacturer = , ProcessorArchitecture = 0, ProcessorStepping = , TotalMemory = 0, OperatingSystemName = , OperatingSystemVersion = (Version#a00a0fff)
    10.0.9888, IsoRWRepositoryAvailableBytes = 0, CpuUtilization = 0, AvailableMemory = 0, Custom = (String[][9]#1d09d25) { (null), (null), (null), (null), (null), (null), (null), (null), (null) }, MaximumMemoryPerVM = 0, MinimumMemoryPerVM = 0, SuggestedMaximumMemoryPerVM
    = 0, IMAPIInstalled = False, AvailableMemoryTierredPerfCounterID = 869a7213-d9dc-41a2-a5d1-d28099894ff6, CpuTieredPerfCounterID = 68e21dec-4b18-4626-9ab3-0c136c654c79, ClusterNodeStatus = ClusterNodeStateUnknown, SecureMode = True, SslTcpPort = 5985, SslCertificateImportedByVMM
    = False, SshTcpPort = 0, IsRemoteFXRoleInstalled = False, IsCPUSLAT = False, HostVolumeIDs = Ø, HostDiskIDs = Ø, StorageFileShareIDs = Ø, HostGPUIDs = Ø, InstalledVirtualSwitchExtensionIDs = Ø, HostFibreChannelHbaIDs = Ø, HostSASHbaIDs = Ø, HostInternetSCSIHbaIDs
    = Ø, PhysicalMachineID = 655a0cbb-5fa8-4379-9a0a-dc645baae95c, OobType = None, IsPowerOptimizationControlled = False, RunAsAccountID = 93e5e250-394a-4917-9e06-88c7fb7edd98, CustomPropertyIDs = Ø, HealthMonitorIDs = Ø }, server = (RemoteServer#21feea7) Microsoft.VirtualManager.DB.Adhc.RemoteServer,
    agentVersionState = (VersionState) { UpToDate } }, agentRefreshSyncObj: (Object) null, checkIfClustered: (Boolean#0) False, refreshEventCapabilities: (Boolean#0) False, taskID: (guid) 1ee6c6db-a399-4033-ad4b-519c0d130f52, taskContext: (TaskContext#38b9a77)
    Microsoft.VirtualManager.Engine.TaskRepository.TaskContext, dbConnection: (TransactableDbContext#[1b46]) { constructionCallSite = (CallSite) { SqlContext.Connect }, sqlContext = (SqlContext#[2bd2]) { [rw] SqlContext.ConnectconstructionIdentity = (WindowsIdentity#27652b0)
    System.Security.Principal.WindowsIdentity commandList: { n=46 { Q:dbo.prc_ADHC_Host_Get(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 [00:00:00.0019993] }, { Q:dbo.prc_ADHC_HealthMonitor_GetAllIDsByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_HostVolume_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 [00:00:00.0010014] }, { Q:dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_HostDisk_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_ST_StorageFileShareAssociation_GetShareIDsByServerIDAndType(@ServerID=4b67d6df-647f-4da3-a00f-12e52bdff947,
    @ServerType=VMHost), @07/12/2014 21:04:57 [00:00:00.0009995] }, { Q:dbo.prc_ADHC_GetHostFibreChannelHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_GetHostSASHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 [00:00:00.0010007] }, { Q:dbo.prc_ADHC_GetHostInternetSCSIHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_HostGPU_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 [00:00:00.0009991] }, { Q:dbo.prc_NetMan_InstalledVirtualSwitchExtension_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_GetHostFibreChannelVirtualSANByHostId(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_AgentServer_Get(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4), @07/12/2014 21:04:57 [00:00:00.0010041] }, { Q:dbo.prc_ADHC_AgentServerRelation_GetByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_HostGroup_GetByID(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e), @07/12/2014 21:04:57 [00:00:00.0009967] }, { Q:dbo.prc_BTBS_HostGroup_GetChildGroupIDs(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e), @07/12/2014 21:04:57 [00:00:00.0009990] }, { Q:dbo.prc_ADHC_Host_GetByGroupID(@HostGroupID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e),
    @07/12/2014 21:04:57 }, { NQ:dbo.prc_VMM_AcquireLock(@ObjectID=4b67d6df-647f-4da3-a00f-12e52bdff947, @ObjectType=VMHost, @TaskID=1ee6c6db-a399-4033-ad4b-519c0d130f52, @ReqLockType=Write), @07/12/2014 21:04:57 [00:00:00.0019787] }, { Q:dbo.prc_ADHC_Host_Get(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 [00:00:00.0010032] }, { Q:dbo.prc_ADHC_HealthMonitor_GetAllIDsByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4), @07/12/2014 21:04:57 [00:00:00.0010090] }, { Q:dbo.prc_ADHC_HostVolume_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 [00:00:00.0009875] }, { Q:dbo.prc_ADHC_HostDisk_GetIDsByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_ST_StorageFileShareAssociation_GetShareIDsByServerIDAndType(@ServerID=4b67d6df-647f-4da3-a00f-12e52bdff947, @ServerType=VMHost), @07/12/2014 21:04:57 [00:00:00.0010157] }, { Q:dbo.prc_ADHC_GetHostFibreChannelHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_GetHostSASHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 [00:00:00.0009850] }, { Q:dbo.prc_ADHC_GetHostInternetSCSIHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_HostGPU_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_NetMan_InstalledVirtualSwitchExtension_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 [00:00:00.0010008] }, { Q:dbo.prc_ADHC_GetHostFibreChannelVirtualSANByHostId(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_HostVolume_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 [00:00:00.0009996] }, { Q:dbo.prc_ADHC_HostDisk_GetByHost(@HostID=4b67d6df-647f-4da3-a00f-12e52bdff947), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_GetHostFibreChannelHbaByHostID(HostID=4b67d6df-647f-4da3-a00f-12e52bdff947),
    @07/12/2014 21:04:57 [00:00:00.0009977] }, { Q:dbo.prc_ADHC_AgentServer_Get(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_AgentServerRelation_GetByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4),
    @07/12/2014 21:04:57 [00:00:00.0010001] }, { Q:dbo.prc_BTBS_HostGroup_GetByID(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e), @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_HostGroup_GetChildGroupIDs(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e), @07/12/2014 21:04:57 [00:00:00.0010000] }, { Q:dbo.prc_ADHC_Host_GetByGroupID(@HostGroupID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_HostGroup_GetByID(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e), @07/12/2014 21:04:57 [00:00:00.0010018] }, { Q:dbo.prc_BTBS_HostGroup_GetChildGroupIDs(@ID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e),
    @07/12/2014 21:04:57 }, { Q:dbo.prc_BTBS_CustomPropertyValue_GetCPValIDByObjID(ObjectID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_Host_GetByGroupID(@HostGroupID=0e3ba228-a059-46be-aa41-2f5cf0f4b96e),
    @07/12/2014 21:04:57 [00:00:00.0009978] }, { Q:dbo.prc_ADHC_AgentServer_Get(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4), @07/12/2014 21:04:57 }, { Q:dbo.prc_ADHC_AgentServerRelation_GetByAgent(@AgentServerID=57f60b84-2997-4a25-b38e-56dc8dae19e4),
    @07/12/2014 21:04:57 [00:00:00.0010001] } } , conn = (SqlConnection#11f39db) { State: Open Database: VirtualManagerDB DataSource: SCVNEXT1-AK PacketSize: 8000 ServerVersion: 12.00.2000 StatisticsEnabled: False WorkstationId: SCVNEXT1-AK } }, constructionIdentity
    = (WindowsIdentity#1b706b2) System.Security.Principal.WindowsIdentity }) in t:\btvsts\38525\private\product\engine\ADHC\Operations\HostRefresher\HostRefresher.cs:line 861
    [s#35e07] VMRefresherBase.RunLightRefresher(this: (VMRefresherBase#[3b8]){ TBD }, dbConnection: (TransactableDbContext#[1b46])) in t:\btvsts\38525\private\product\engine\BitBoS\VmRefresher.cs:line 1178
    [s#35e06] VMRefresherBase.UpdateHostAndVMs(this: (VMRefresherBase#[3b8]), refresherType: VMRefresherType.LightVMRefresher, vmObjectId: (guid) 00000000-0000-0000-0000-000000000000, tempVm: (VM) null, dbConnection: (TransactableDbContext#[1b46])) in t:\btvsts\38525\private\product\engine\BitBoS\VmRefresher.cs:line
    693
    [s#35ddc] VmLightRefresher.RefreshData(this: (VmLightRefresher#[1]) { tbd }, hostRef: (HostReference#[b]) { hostID = 4b67d6df-647f-4da3-a00f-12e52bdff947, hostConnectionParams = (WSManConnectionParameters#16a611e) hvnext2-ak.dev.amust.local, isClustered = False
    }, dbConnection: (TransactableDbContext#[1b46])) in t:\btvsts\38525\private\product\engine\BitBoS\VmRefresher.cs:line 208
    [s#35ddb] RefreshDriver`1.RefreshThreadFunction(this: (RefreshDriver`1HostReference#[4]) { tbd }, obj: (WaitCallbackStateHostReference#2143066) Microsoft.VirtualManager.Engine.RefreshDriver`1WaitCallbackState[Microsoft.VirtualManager.DB.Adhc.HostReference])
    in t:\btvsts\38525\private\product\engine\Common\RefreshDriver.cs:line 568

    ----------------------------------------------------
    --------------- exception.StackTrace ---------------
    ----------------------------------------------------
    at System.Guid.GuidResult.SetFailure(ParseFailureKind failure, String failureMessageID, Object failureMessageFormatArgument, String failureArgumentName, Exception innerException)
    at System.Guid.TryParseGuidWithDashes(String guidString, GuidResult result)
    at System.Guid.TryParseGuid(String g, GuidStyles flags, GuidResult result)
    at System.Guid..ctor(String g)
    at Microsoft.VirtualManager.Engine.EngineFSUtils.GetVolumeIDFromVolumeName(String volumeName)
    at Microsoft.VirtualManager.Engine.ImageLibrary.StorageDataHelper.CreateVolume(MSFT_Volume volume, MSFT_Partition partition, WsmanAPIWrapper wrapper)
    at Microsoft.VirtualManager.Engine.Adhc.SMStorageRefresher.GetVolumes(IVmmDbContext ctx)
    at Microsoft.VirtualManager.Engine.Adhc.WindowsHostDataProperties.PopulateProperties(IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.Adhc.WindowsHostAbstractionLayer.GetHostProperties(HostData oldHostData, Version agentVersion, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.GatherAllInformation(Host host, Object agentRefreshSyncObj, Boolean checkIfClustered, Boolean refreshEventCapabilities, String clusterName, Guid taskID, ITaskContext taskContext, IVmmDbConnection
    dbConnection)
    at Microsoft.VirtualManager.Engine.Adhc.HostRefresher.RefreshLockedHost(Host host, Guid taskID, ITaskContext taskContext, Boolean checkClusterStatus, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostToResponding(Nullable`1 prevState, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostState(IVMComputerSystemSummary[] vmComputers, Nullable`1 prevState, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.RunLightRefresher(IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, Guid vmObjectId, VM tempVm, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VMRefresherBase.UpdateHostAndVMs(VMRefresherType refresherType, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.BitBos.VmLightRefresher.RefreshData(HostReference hostRef, Nullable`1 auditTaskId, IVmmDbConnection dbConnection)
    at Microsoft.VirtualManager.Engine.RefreshDriver`1.c__DisplayClassa.RefreshThreadFunctionb__7(IVmmDbConnection _dbConnection)

    ----------------------------------------------------
    ------------- StackTrace from handler --------------
    ----------------------------------------------------
    This is the call stack from where the exception was caught, not where it was thrown.
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String localReportPath)
    at Microsoft.VirtualManager.Engine.TaskRepository.TaskRepository.HandleCriticalRefresherFailure(Object sender, CriticalRefreshFailureEventArgs eventData)
    at Microsoft.VirtualManager.Engine.RefreshDriver`1.c__DisplayClassa.RefreshThreadFunctionb__7(IVmmDbConnection _dbConnection)
    at Microsoft.VirtualManager.DB.SqlContext.Connect(Action`1 action)
    at Microsoft.VirtualManager.Engine.RefreshDriver`1.RefreshThreadFunction(Object obj)
    at Microsoft.VirtualManager.Utils.Multithreading.ThrottledThreadPool.c__DisplayClass3.ScheduleNextThreadb__2(Object dummy)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
    at System.Threading.ThreadPoolWorkQueue.Dispatch()

    ----------------------------------------------------
    -------------------- Assemblies --------------------
    ----------------------------------------------------
    mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
    Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
    Version=4.5.27.0
    Product=Microsoft® .NET Framework
    System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
    Version=10.0.9888.0
    BuildType=retail
    Product=Microsoft (R) Windows (R) Operating System
    WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
    Version=10.0.9888.0
    BuildType=retail
    Product=Microsoft (R) Windows (R) Operating System
    Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    WSManAutomation, Version=3.2.9013.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
    Version=4.5.27.0
    Product=Microsoft® .NET Framework
    System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    DB.DelegatedAdmin, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    Microsoft.CSharp, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    DB.TieredPerfCounters, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
    Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
    Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
    Version=3.2.9013.0
    BuildType=retail
    Product=System Center Virtual Machine Manager Technical Preview
    System.Dynamic, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Dynamic\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Dynamic.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Dynamic\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Dynamic.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework
    System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
    Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
    Version=4.5.27.0
    BuildType=retail
    Product=Microsoft® .NET Framework

    ----------------------------------------------------
    --------- Extra Data for Watson Report -------------
    ----------------------------------------------------
    Error Reporting Enabled=True
    *** Extra Data ***
    Process ID = 7204 (0x1c24)
    Managed Thread ID = 74
    Native Thread ID = 14652 (0x393c)

    Alec King Director, Product Management @ Veeam Software

    DB:3.13:Error Adding Win Server Technical Preview Host To Virtual Machine Manager Technical Preview s1

    On Mon, 8 Dec 2014 01:34:38 0000, Alec The King wrote:

    What is your motivation here

    Simply to point out that build 9888 has not been made available to the
    Windows 10 TP participants therefore these are not the correct forums for
    support of that build. It also is not the correct place to get support for
    System Center Virtual Machine Manager Technical Preview which is the
    product throwing the error.

    Paul Adare - FIM CM MVP
    I think that I shall never see -- A structure ugly as a tree.
    From leaf to leaf I wish to leap -- From branch to root to branch I creep.
    -- Ode To Menu Systems, Richard A. Fowell

  • RELEVANCY SCORE 3.13

    DB:3.13:Starting Up Vc For First Time And Trying To Connect To Virtual Center Serve m7



    I have installed virtual center 2.0 and virtual infrastructure client and am trying to connect to the virtual center server for the first time.

    I enter the name of the virtual center and then a domain admin userid and password but I keep getting this error...

    "Cannot connect to host xxx.xxx.com. No connection could be made because the target machine actively refused it"

    I have tried by IP as well and no go...

    Help anyone.

    DB:3.13:Starting Up Vc For First Time And Trying To Connect To Virtual Center Serve m7


    Thanks esiebert7625.

    I did have to uninstall and re-install and this time selected SQL authentication.

    Now it works...

    Points to you.

    and lesson learnt...RTFM

  • RELEVANCY SCORE 3.13

    DB:3.13:Error Connecting To Host In Vc 9x



    I am getting an intermittent error when I click the console tab on a host in virtual center:

    Error connecting: Cannot connect to host : A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond-Do you want to try again?

    Has anyone seen this and/or know of the cause/fix?

    DB:3.13:Error Connecting To Host In Vc 9x

    There is a bug in 3.x and it is resolved in 3.5 with proper error message

    Bug in 3.x:

    If there is a Virtual Instance running in ESX Server, from the virtual instance if you try to connect the same esx through VI Client, you will get this error and also the virtual instance network connection will go down.

    Solution:

    Avoid connecting to ESX Server through the virtual instance which is running on same ESX Server

  • RELEVANCY SCORE 3.13

    DB:3.13:Virtual Center Documentation cs



    I'm looking for some documentation on what the Host CPU - Mhz, Host Mem - MB, and Guest Mem - % numbers represent within virtual center and how they are calculated.

    Jason

    DB:3.13:Virtual Center Documentation cs


    Yeah, it's growing every day, I have about 50 more links to add to my website.....

  • RELEVANCY SCORE 3.12

    DB:3.12:Virtual Center Issues 33



    this just started to happen. Has anyone else seen this issue?

    When i click on the vm in virtual center i get an error saying

    "Host address lookup for server xxxxxxx(server name)failed: The requested name is valid and was found in the database, but it does not have the correct associated data being resolved for"

    DB:3.12:Virtual Center Issues 33


    Agreed. This is a DNS 'network' problem. I have experienced this several times.

    What works for me every time is to run 'ipconfig /renew' from the DOS prompt of the workstation you are running VC on.

  • RELEVANCY SCORE 3.12

    DB:3.12:Virtual Center 2.5 pz



    Hi ,

    I want to add my GSX server 2.5 or Vmware server 3.0 to Virtual center 2.5 as a host . when i am trying for this i am getting some error related to cluster so any body can help me

    DB:3.12:Virtual Center 2.5 pz


    You won't be able to manage GSX with VirtualCenter 2.5. See the compatability guide for what you can manage with VC 2 - http://www.vmware.com/pdf//vi3_35/esx_3/r35/vi3_35_25_compat_matrix.pdf. By VMware Server 3.0 do you mean ESX 3.0? If so what's the specific error message that you're getting?

  • RELEVANCY SCORE 3.12

    DB:3.12:Error (2912) Vmm Agent Installation Failure 3x


    when I try to install VMM 2012 R2 agent on Hyper-v hosts I get this error
    An internal error has occurred trying to contact the server: NO_PARAM: NO_PARAM.
    WinRM: URL: [http://server:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={7B5038C2-E85E-465E-AC60-6CE60A6128E4}]
    Unknown error (0x80072f0d)
    Action
    Check that WS-Management service is installed and running on server. For more information use the command winrm helpmsg hresult. Ifserver is a host/library/update server or a PXE server role then ensure that VMM agent is installed
    and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
    BTW I already upgraded to VMM UR3
    after enabling VMM debug I noticed this error
    [Microsoft-VirtualMachineManager-Debug]4,4,BitDeploymentSubtask.cs,2075,DeployStep : Going Deploy file C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\SwExtn\DHCPExtn.msi from VMM server to
    \\hyper-vhost \ADMIN$\DHCPExtn.msi on hyper-v host,{00000000-0000-0000-0000-000000000000}
    [Microsoft-VirtualMachineManager-Debug]4,2,BitsDeployer.cs,980,Failed to transfer
    \\hyper-v host\ADMIN$\DHCPExtn.msi due to [Unknown error (0x80072f0d)], removing the entry from the current
    xfer list...,{00000000-0000-0000-0000-000000000000}
    Carmine error was: HostAgentFail (2912); HR: 0x80072F0D *** C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\SwExtn\DHCPExtn.msi ** hyper-v host
    If Iinstall this DHCPExtn.msi manually on the host the installation goes fine.

    DB:3.12:Error (2912) Vmm Agent Installation Failure 3x

    Is windows firewall enabled on the host?
    If so I would try disabling it.Gil Gross | Technical Lead | G-Net Network Solutions | www.g-net.co.il | plz visit my blog - gilgrossblog.wordpress.com

  • RELEVANCY SCORE 3.12

    DB:3.12:Virtual Center 2 With Two Esx 2.5 And One Esx 3.01 zc



    Hi,

    i have upgrade our virtual center from 1.2 to 2.

    now i see my two esx host with virtual center but don't see the configuration tab.

    also i can not add an esx 3.0.1 host with an host based licence file.

    error=not enozgh licence. what it is?

    under licences in vc i see ESX Server Standard Cost 1/CPU Package, Remaining 8 and Total 8

    DB:3.12:Virtual Center 2 With Two Esx 2.5 And One Esx 3.01 zc


    yes i have, and under the esx 3.01 host i see licenced for 4 cpus

  • RELEVANCY SCORE 3.12

    DB:3.12:Upgrading To Vmfs 3 Fails Witherror Code 38 kj



    Hello,

    I am trying to upgrade our existing storage (SATA disks on a MSA1500, capacity 1,25 TB) to VMFS3 using the option in the Virtual Center (Host - Configuration - Storage - Uprgade to VMFS3), but while it worked on the previous volume we converted it fails this time with error code 38. Error message: "Error during the configuration of the host: System call "ConvertToFS3" failed with error code 38: Function not implemented and message Unable to Upgrade FileSystem"

    Any ideas how to solve this problem?

    Thanks and best regards,

    north

    DB:3.12:Upgrading To Vmfs 3 Fails Witherror Code 38 kj


    I haven't seen anywhere the information that "his vmfs block is 1MB". fsorenson spoke about "Converting from VMFS2 (16MB blocks) to VMFS3 (8MB blocks) simply won't work in ESX 3.0.0" - We had the same problem with the error code 38. Our VMFS2 was with a 16MB blocksize.

    Sorry if there was a mismatch.

    Message was edited by:

    DCasota

  • RELEVANCY SCORE 3.11

    DB:3.11:Unable To Vmotion To New Host (Virtual Smp) sj



    I'm having an issue when trying to vmotion a vm from server A to server B.

    I'm getting the following error message:

    Unable to migrate from server A to server B: Virtual machine has 2 CPU's, but the host software only supports1. Please check the license on the host.

    So I checked the host (both of them actually just to be safe) and both hosts are using ESX Server Standard Licenses licensed for 4 CPU's and "Up to 4-way virtual SMP" is listed under the license type.

    I checked the license file on the license server which is located on my Virtual Center server and it looks right.

    Should I restart the license service on the Virtual Center server?

    Is there something I'm missing?

    DB:3.11:Unable To Vmotion To New Host (Virtual Smp) sj


    Install VC 2.0.2 Update 2. This should solve the issue.

    It's not mentioned anywhere, but seems to be an undocumented fix.

    Other temporary workaround is:

    http://kb.vmware.com/kb/1001003

    Regards, Martin

  • RELEVANCY SCORE 3.11

    DB:3.11:Virtual Center On A Vm 3z


    Is there any reason why a Virtual Center would not run on a VM? I have tried to install VC on my W2K3

    Server VM and keep getting errors trying to start the Virtual Center.. The error message I get is attached.

    DB:3.11:Virtual Center On A Vm 3z

    Try putting a domain admin account for the VMware VirtualCenter service. This is usually the case if the service doesn't start. And putting VC as a vm does work but it is not the preferred method.

    Michael

  • RELEVANCY SCORE 3.11

    DB:3.11:Vc Server Task Stops kf



    We are running Virtual Center 1.3.1 on Windows 2003 Server.

    When I yesterday tried to log into Virtual Center I'm got the error

    "Cannot connect to local host: no connection could be made because

    the target machine refused it."

    I found, that the "Virtual Center Server Task" in Windows is not running.

    I could restart it, but after a short Period it stops again.

    Where is the Problem?

    DB:3.11:Vc Server Task Stops kf


    I think I fixed the problem in repairing the database:

    control panel -- administration -- odbc

    system-dns -- mark virtual center -- configure -- repair

    Since then the virtual center task is running.

    Thanks.

  • RELEVANCY SCORE 3.10

    DB:3.10:Backup Esxi4 With Vicfg-Cfgbackup k1



    Hello I am trying to back up an esxi4.0 host configuration with the vicfg-cfgbackup.plI have a vcenter server so when I run the command

    vicfg-cfgbackup.pl save server 192.168.1.9 username root password **** backup.bakI get error massage:*vihost option must be specified when connecting to Virtual Center What is the correct syntax to run the backup job from VC VC IP:192.168.1.227 Host IP:192.168.1.9

    Thanks

    Mdisk

  • RELEVANCY SCORE 3.09

    DB:3.09:Proper Procedure For Migrating Virtual Center To Another Machine? dd



    What is the proper procedure for migrating virtual center from one physical machine to another?

    Scenereo:

    We have virtual center running on an old server and would like to move it on another machine.

    So far, the new machine is up and running with virtual center installed. We manually copied over the license file from the old machine (still up and running) And of course, the new machine will "complain" when trying to add a host managed by another virtual center machine.

    We tried disconnecting the host from the old machine first then re-connecting on new machine but still get "Failed to install the virtualcenter agent service".

    What steps are we missing?

    Thanks in advance!

  • RELEVANCY SCORE 3.09

    DB:3.09:Error When I Try To Add Host In Vc k8



    Dear all,

    I have an error message "A general system error occurred: internal error" when i tried to ad host in virtual center server, i have to ESX servers 3.0.1 i success to add one of them but i cant add another host, Please advice

    BR

    Mohab

    DB:3.09:Error When I Try To Add Host In Vc k8


    Matey, I had this same error....Drove me CRAZY... we run ESX 3.0.2 and Virtual Infrastructure/Center 2.0.2

    I also noticed, under the permissions tab in Virtual Infrastructure when logged into the server directly (eg not via VC), that instead of the usual "servername.domain.com" in the "defined in" tab, that they had "this resource" listed instead of its own "servername.domain.com".

    To be able to ADD ESX HOSTS and get rid of the "A General Error has occurred: Internal system error", you need to type these commands in the console...

    a) cd /etc/vmware/hostd/

    b) ls (you should see authorization.xml config.xml, env, environments.xml esxinfo.vha and hostsvc.xml

    c) type "mv authorization.xml authorization.xml.old"

    This will reset the authentication stamp on the file that is responsible for adding the ESX host to Virtual Center***

    d) restart the vmware management service by typing "service mgmt-vmware restart"

    Then ensure the ESX host you are trying to connect is REMOVED, THEN READD it.

    This should work! It did for me thanks to the guys at Tech Support....! they are guru's...I would never had found this

  • RELEVANCY SCORE 3.09

    DB:3.09:Vsphere Ha Error For This Host Has An Error: After Virtual Center Upgrade From 4.1 To 5.0 z1



    Has anyone had this error before? I upgraded my Virtual Center host from 4.1 to 5.0 today. When i logged in i checked the ESXi 4.1 CLuster i had setup in that environment and i can across this HA error.. Anyone know how to fix this?

  • RELEVANCY SCORE 3.09

    DB:3.09:Removing A Dead Esx Host From Virtual Center 3s


    I have an Expired (as in dead!) host in my virtual center system, I want to remove it, however, when I try to remove I get an error

    "Unable to contact the specified host ....."

    DB:3.09:Removing A Dead Esx Host From Virtual Center 3s


    Thanks,

    I took an alternative route in the end, I created a new vSphere vCenter server and migrated each of my hosts over one by one as we where readly for esx 4.0

    I now have my old vCenter server with one datacenter left to move and three broken Datacenters which will not delete

  • RELEVANCY SCORE 3.08

    DB:3.08:Unable To Find Server ? d9



    I'm trying to do a P2V. All is well with the SOURCE configuration.

    For the DESTINATION configuration, I am able to login to the destination host, etc. After choosing the datastore I get a error message stating 'Unable to find server'.

    I tried connecting to the Virtual Center and selected the host from there, but the samething happens. See attached.

    Any suggestions appreciated.

    Message was edited by: bulletprooffool - Modified Screen Capture to small png file.

    DB:3.08:Unable To Find Server ? d9


    in case you dont know how to do that - here is the building kit I maintainhttp://communities.vmware.com/docs/DOC-14671

  • RELEVANCY SCORE 3.08

    DB:3.08:Problem With Npiv 1x



    Hi,

    I am trying to configure NPIV on a virtual machine but can not despite having followed all the steps on several guides on.

    Environment:

    - ESX 3.5

    - SAN EMC CX500 SAN with 4 switches : 2 DS-24m2 and 2 Brocade with ISL

    HBAs and SAN switches have NPIV enabled

    1. With Navisphere I created a LUN and I have assigned to StorageGroup which includes the ESX Server host

    2. With Virtual Center, I created a virtual machine to which I assigned the length through a disk RDM.

    3. I made the switch in the SAN zones containing the following WWPN:

    - Virtual machine

    - ESX host

    - Storage Processors

    4. In Navisphere I added manually in the form Initiators WWNN: WWPN assigning as the ESX host that contains the virtual machine

    5. I started the VM

    Unfortunately running the command cat / proc / scsi / lpfc / * known to the virtual ports are not created

    NPIV Supported: VPIs VPIs used max 16 0

    and / var / log / vmkernel is always error

    WARNING: SCSI: 745: Failed to Create VPort world for xxxx vmhba1, rescan failed, status = bad0001

    Where could the error? I'm crazy for two days and I can not get out.

    Another question related more to the problem, you can install a virtual machine as the Emulex lpfc driver on a physical machine? The host that contains the virtual machine has installed two of Emulex HBAs.

    I followed the instructions of this post but the problem rispresenta anyway.

    http://kb.vmware.com/selfservice/mi...Id=1018326

    Thanks

    DB:3.08:Problem With Npiv 1x


    Another question related more to the problem, you can install a virtual machine as the Emulex lpfc driver on a physical machine

    Installing the driver on the VM will not work. That device isn't actually attached to the VM, it's on the host. NPIV is what you want.

    So it's very simple. check the config of the VM, did you enable NPIV AND make Virtual WWN WWP on that VM as well? You need at least 1 of each for the VM.

    The Host, the VM (WWN/WWP) and the storage need to be properly zoned. So IF the host can see the VM WILL see it by default, ALL the VM's will unless you specifically keep them out of the zone. A mistake many people make is making a NEW zone for this purpose, but what people don't realize is that NEW zone may override a previous zone.

    So SAN1 is in zone DATA. ESX1 is in zone DATA. Now you want to create a zone for VM1. So you create a new zone called DATA2. You add SAN1, ESX1, and VM to this new zone, and THEN you tell the zone ONLY allow these devices, which will knock out the zone DATA.

    All you really need is the original zone, add VM1 to it. The SAN will determine which devices can access (and not the switch). That could be part of your problem. Also some vendors need the WWN AND WWP for ALL devices.

    In our case I have to zone JUST the WWPN (for the host) and use the WWNN (from the VM) in order to see it, which makes no sense, but that too me a whole day to figure that out. So maybe you did everything right, it could be which zoning you are using.

    A general rule is WWPN is for target, WWNN is for sender. So you put WWPN in the switch zoning, and put WWNN on the SAN mapping. Sometimes adding both WWPN and WWNN works, but then others EITHER and NOT both will work, so you may have to manipulate the WW names you used and figure out a good combo.

    Don't you just love Fiber?

    It's really not that hard to configure beyond that. Make SURE the ESX host can see that SAN data AND it's not a VMFS datastore.... it MUST be raw!

    If this is all correct, zone properly and VM1 (WWN) are visible to the data, then it should work fine.

  • RELEVANCY SCORE 3.08

    DB:3.08:Convert 3.0.1 Will Not Conect To My Virtual Center kd



    I have just upgraded to Converter 3.0.1. When trying to connect to My Virtual Center ( 2.0.1) I get an error message saying that the managed host was actually running ESX 2.x, rather than 3.x or VC.

    I was able to use converter before the upgrade to connect to the host.

    I can still convert by going directly to the ESX server.

    Is there something I need to change in my configuration of the VC?

    DB:3.08:Convert 3.0.1 Will Not Conect To My Virtual Center kd


    Can you upgrade converter to 3.0.3 (www.vmware.com/downloads/converter)

    Can you then choose the IP address of your ESX server using username "root" for your destination? This is assuming you have ESX 3.x

  • RELEVANCY SCORE 3.08

    DB:3.08:Virtual Center Heartbeat Problem. xk



    Hi everyone,

    This problem is driving me nuts and I'm hoping that someone can help. I'm trying to use connect my ESX 3.0.1 host to my Virtual Center 2.0 server. I have all of the latest hotfixes and patches installed.

    Using the VI Client, I connect to my Virtual Center server, then add my ESX Host to the inventory. The host remains connected for about one minute, and then changes to a state of "not responding". If I disconnect the host and then reconnect it, the same thing happens after about one minute.

    When I check my /var/log/vmware/vpx/vpxa.log files, I see the following errors:

    'App' 167164848 error] Failed to bind heartbeat socket

    \[2007-03-20 12:07:56.904 'App' 3076440992 error] \[VpxVmdbCnx] Authd error: 514 Error connecting to hostd-vmdb service instance.

    \[2007-03-20 12:07:56.904 'App' 3076440992 error] \[VpxVmdbCnx] Failed to connect to host :902. Check that authd is running correctly (lib/connect error 11)

    I have opened firewall traffic between my ESX Host and VC Server for every tcp and udp port but still no success. I've even tried reinstalling the vpxa agent and VMWare support is no help. I see others have had this problem, but I am unable to find any who have resolved it.

    Any help is appreciated.

    DB:3.08:Virtual Center Heartbeat Problem. xk


    Thanks for the responses guys.

    I've already tried restarting all of those services and restarted the server many times.

    How do I go about uninstalling the agent from the ESX host? I had simply copied the esx agent file from my VC Server to my ESX host, and reinstalled it that way. If there is another way, please let me know.

    Thanks.

  • RELEVANCY SCORE 3.08

    DB:3.08:System Center Virtual Machine ( 2927 ) 0x80338173 - A Hardware Management Error Has Occurred Trying To Contact Server - Check That Winrm Is Installed And Running On Server m3


    No Event Viewer ocorre este erro:
    Job 44a89790-fb2d-4227-86fa-13ac0e1dc6bf (Add virtual machine host) failed to complete.

    E no System Center Virtual Machine 2008 R2 ocorre este erro:
    Error (2927)
    A Hardware Management error has occurred trying to contact server xxxxxxxxx

    (Unknown error (0x80338173))

    Recommended Action
    Check that WinRM is installed and running on server xxxxxxxx. For more information use the command winrm helpmsg hresult.

    Meu ambiente SCVMM:
    Windows Server 2008 R2 x64
    System Center Virtual Machine Manager Server 2008 R2 ( última update )

    Ambiente que quero adicionar como Host:
    Windows Server 2008 R2
    WinRM instalado

    Testes realizados:
    - Quando faço WINRM -R: de outras maquinas funciona
    - Já fiz QUICKCONFIG nas duas máquinas
    - Já desabilitei no Firewall o WinRM na maquina host que quero adicionar ( Alias já baixei o firewall das duas ao mesmo tempo para tentar adicionar )
    - Já alterei porta 443 como em alguns tutoriais
    - Já atualizei todas as últimas updates solicitadas nas duas máquinas
    - Já instalei e reinstalei o AGENT do host ( manualmente e automaticamente )

    - Alterei registros no regedit como informado em alguns sites
    - Todos os serviços estão rodando, ( wirm, agent scvmm )

    Tudo parece estar em perfeito estado porém mesmo assim o erro continua,

    Por favor alguém tem uma solução ?

    Obrigada!

    DB:3.08:System Center Virtual Machine ( 2927 ) 0x80338173 - A Hardware Management Error Has Occurred Trying To Contact Server - Check That Winrm Is Installed And Running On Server m3

    Its the same error, http://social.technet.microsoft.com/forums/en-US/virtualmachingmgrsetup/thread/b0015cb8-9b75-4646-b230-6a8fb009588a/
    I solve now,
    Thank very much Lawrence!

  • RELEVANCY SCORE 3.08

    DB:3.08:Failed To Add Esx2.5.3 Host To Vc2 dc



    Hi

    im trying to add two esx 2.5.3 hosts to my VC2 inventory...

    first i was getting the "Failed to install the Virtual Center agent service" while trying to connect to the hosts from VC, then i installed the vpx-upgrade-esx-5-linux-27704 on both hosts manualy.

    one of the got connected, the other still shows the same error message, i already rebooted after aplying the update, but its not letting me connect to the host from vc

    id appreciate little help on this

    thank you.

    DB:3.08:Failed To Add Esx2.5.3 Host To Vc2 dc


    There is a setting on the VC2 server that you must clear for 2.5.x servers to register correctly. I think it is availabe from the Menu bar and has something to do with unchecking the option "Do not change the host licensing option" or something close to that. I'm working from memory as I am not at work but I had a similar problem.

  • RELEVANCY SCORE 3.08

    DB:3.08:Virtual Center 2.02 Not Working After Licensing File Change And Vc Restart p9



    Stopped Licensing Services; installed a new lic file; refreshed; restarted the licensing service; stopped Virtual Center Services and when restarted would virtual Center would not start with Error 1067 process terminated unexpectedly.

    Reinstalled licensing service - same error

    Reinstalled Virtual Center pointing to same database location would not come up. Trying to avoid loosing all the data with a complete reinstall of VC SQL database instance.

    DB:3.08:Virtual Center 2.02 Not Working After Licensing File Change And Vc Restart p9


    Check the VC log file for more detailed info on the problem, it is located in the C:\Windows\Temp\VPX directory on the Virtual Center server

  • RELEVANCY SCORE 3.07

    DB:3.07:Can Not Add Vmware Server As A Host s9



    Hi

    im pretty new to VMware recently our company bought vi 3 with virtual center this has work fine with no problem. this week however we have tried to add a VMware server as a host to be manage by virtual center everytime i try to link this i get an error that it can not create the management account am i doing something wrong?

    DB:3.07:Can Not Add Vmware Server As A Host s9


    You can only manage VMware Server with VC 1.4, you can't manage it with VC 2.x currently.

  • RELEVANCY SCORE 3.07

    DB:3.07:Error Trying To Add Host In Virtual Center 2.0 px



    Just upgraded our test vm from ESX 2.5.3 to 3.0

    Getting the error below when trying to add a host:

    An invalid type 'vim.vm.summary.guestsummary' was received by the server

    I receive this after entering the host name (or IP address) and entering the username root and the corresponding pw.

    DB:3.07:Error Trying To Add Host In Virtual Center 2.0 px


    You've posted to the wrong forum - this forum is for the VMware Server Beta product. You might try posting in the ESX forum.

  • RELEVANCY SCORE 3.07

    DB:3.07:Vicenter Can Connect To A Host, But After 1 Minute The Host Disconnect px



    Hi,

    I'm trying to add one Host in a different newtork from Virtual Center but with firewall open and permissions. In fact, I can add the host and I can connect, but after a few moments (between 1 or 5 minutes) the host disconnect from Virtual Center. Could anyone help me on that? Thanks in advance.

    Best Regards,

    DB:3.07:Vicenter Can Connect To A Host, But After 1 Minute The Host Disconnect px


    Well I was wrong it was a routing table that needed to be updated.

  • RELEVANCY SCORE 3.06

    DB:3.06:Unable To Add A Previously Configured Virtual Disk To A Vm 17



    I get the below error while trying to add a previously configured Virtual Disk to ESXi 4.1 Host. Please Help.

    DB:3.06:Unable To Add A Previously Configured Virtual Disk To A Vm 17


    It probably happened because of the disk format.

    You can import the disk to be compatible on a ESX host by using the below command (login into the esxi via techsupport mode or ILO)

    vmkfstools -i ProblematicDisk AnyName

  • RELEVANCY SCORE 3.06

    DB:3.06:Request Timed Out Error While Connecting Esx Server 3.0.2 To Vc 2.5 a3



    Hi,

    I have earlier connected ESX server 3.5 and 3.0.2 servers to Virtual Center 2.5.

    Now i disconnected from VC 2.5 and connected it to Virtual Center 2.0.1.

    And i have disconnected it and want to connect ESX server 3.0.2 back to Virtual center 2.5.

    But i am not able to do that, as it is throwing " Request timed out" error while adding ESX server 3.0.2 host to Virtual Center 2.5.

    I rebooted the ESX server 3.0.2 and tried to connect but it was not connected.

    Can anybody help me?

    Thanks....................................

    DB:3.06:Request Timed Out Error While Connecting Esx Server 3.0.2 To Vc 2.5 a3

    Can you specify what the "Networking" problem was? I'm having the same issue.

  • RELEVANCY SCORE 3.05

    DB:3.05:Cannot Connect To Host When Add To Virtual Center k1



    I tried to connect the host to virtual center and all others seem to be fine. But one of them I got error "cannot connect to host" after about 10 minutes. I checked the DNS configuration and all seems to be fine.

    Any idea what else can go wrong??

    Thanks.

    DB:3.05:Cannot Connect To Host When Add To Virtual Center k1


    Do you have a firewall between your VirtualCenter server and the ESX Server? If so, do you have the relevant port open?

    I hope this helps.

  • RELEVANCY SCORE 3.05

    DB:3.05:Ufad_System Error (File Is Larger Than The Maximum Size Supported By Datastore) c1


    I'm trying to use VMWare Converter Enterprise edition to clone a physical server to a virtual machine on a Virtual Center Cluster. The source machine has two disks - one of 136GB and the other of 273GB. I wish to migrate both of these and maintain the size of the disks. The Datastore I'm trying to use to host the new VM has 1.2 TB free.

    I'm therefore confused when the converter process fails with the above error message. Can anyone shed any light on this?

    Regards

    Rich

    DB:3.05:Ufad_System Error (File Is Larger Than The Maximum Size Supported By Datastore) c1


    Given that you are attempting to place a larger then 256GB file onto ESX, you should note that you will need to have a VMFS partition with a blocksize larger then the default 1MB allocated. Please reference the snippet taken from our Maximums guide.

    From the Configuration maximums guide:

    http://www.vmware.com/pdf/vi3_301_201_config_max.pdf

    =======================================

    VMFS 2

    Volume size (2TB x number of extents) (Minimum = 100MB)

    File size (block size=1 MB) 456GB

    File size (block size=8 MB) 2TB

    File size (block size=64MB) 27TB

    File size (block size=256MB) 64TB

    Number of files per volume 256 + (64 x number of extents)

    VMFS 3

    Volume size (block size = 1MB) ~16TB 4GB (denotes an approximate value)

    Volume size (block size = 2MB) ~32TB 8GB

    Volume size (block size = 4MB) ~64TB 16GB

    Volume size (block size = 8MB) 64TB

    File size (block size=1MB) 256GB

    File size (block size=8MB) 2TB

  • RELEVANCY SCORE 3.05

    DB:3.05:Hyper-V Did Not Find Virtual Machines To Import From Location Location Of The Exported Vm 3z


    Hi! I'm having a problem with my hyper-v virtual machines. The thing is that I want to export them to ahard disk driveand import them to another physical host. I have 3 hyper-v hosts being managed by System Center 2012 Virtual
    Manager SP1, I cannot import all the VMs to another physical host. When I'm exporting a certain VM and tried to import it to the same host, it can be imported but when I'm trying to import it to another host, the error above keeps on appearing.
    I'm saving myself from recreating and reconfiguring all of those VMs and then attaching the virtual hard disks, but if this is the only way to move them, I have no other choice but to recreate and reconfigure all my VMs. But still, I want to know
    what can be the cause and what is wrong with exporting a VM from a host being managed by SCVMM and importing it to a standalone Hyper-V host.
    I also tried exporting a VM from a standalone host and importing it to another host and it works fine. So I'm wondering what's causing my setup to fail on importing VMs.
    Can anyone help me on this? Thank you very much and I'm looking forward for your responses. :)

    Regards,
    Joann

    DB:3.05:Hyper-V Did Not Find Virtual Machines To Import From Location Location Of The Exported Vm 3z

    I am using Hyper-V 2012 hosts manage by SCVMM 2012. Yes, I tried copying the whole folder for a virtual machine and imported to another host but it has the same error. If I try to import it to the same host it works fine.

  • RELEVANCY SCORE 3.05

    DB:3.05:Sysprep kc



    Where can I located the VMware sysprep folder on a W2K8 virtual center host ?

    DB:3.05:Sysprep kc


    in aditional informations, you can see this article http://www.vmwareinfo.com/2008/05/sysprep-windows-2008-in-vmware.html

    Please, don't forget the awarding points for "helpful" and/or "correct" answers.

    Mauro Bonder - Moderator

  • RELEVANCY SCORE 3.04

    DB:3.04:Add Esxi To Virtual Center fd



    How can i add ESXi 4 to a virtual center 2.5 to manage it but NOT to existing cluster?

    I have created a new datacenter and tried adding the host but got an error message

    DB:3.04:Add Esxi To Virtual Center fd


    As marcelo indicated you can not manage an ESX/ESXi 4.0o host with vc 2.5 -

    If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful

  • RELEVANCY SCORE 3.04

    DB:3.04:Virtual Center 2.5 U2 Esx 2.5.2 cx


    Hi,

    I have this issue, I have a Vcenter 2.5 U2 and I want to connect a ESX 2.5.2 Build 16390, I can connect one ESX 2.5.2 but I am trying connect other one but it shows an error message: unable to connect to specific host, I did the instructions in http://communities.vmware.com/message/1096760#1096760 but it wasn't unsucesfull, what can I do? thanks for your help.

    EA

    DB:3.04:Virtual Center 2.5 U2 Esx 2.5.2 cx

    Hi,

    I updated to 2.5.2 U4 and now i can connect the ESX to VC.

    Thanks for your help.

  • RELEVANCY SCORE 3.04

    DB:3.04:"Unable To Access The Specified Host" Virtual Center Error Msg 1p



    Using the VI client to access Virtual Center, I have tried to add hosts using the Add Host Wizard. However, when I enter either the hostname or IP address of the host and the root username and password it just gives me the error message "Unable to access the specified host". This also happens for the Windows 2003 Server I have tried to connect to. What am I doing wrong?

    DB:3.04:"Unable To Access The Specified Host" Virtual Center Error Msg 1p


    Here are a few specific things to try...

    At the console of the ESX host, login with an admin (root) account, then perform the following steps (literal commands, substitute your configuration info for italicized text):

    1)[/b] Check the IP Configuration of the Service Console Network Connection, by executing the following command: esxcfg-vswif -l[/b]

    This command will provide a list of the service console's current network interfaces. Ensure that "vswif0" is present. Then check that "Enabled" is 'true', that "DHCP" is 'false' (assuming that you are using Static IP Address Assignment). Also ensure that the IP Address shown is the correct IP Address/Netmask that you have assigned ot the host.

    2)[/b] Check the current Virtual Switch Configuration, by executing the following command: esxcfg-vswitch -l[/b]

    This command will provide a list of the current Virtual Switch configuration. Ensure that "vSwitch0" is configured and that an uplink is present (usually vmnic0). Under vSwitch0, ensure that the portgroup "Service Console" is present. Note the "VLAN ID" for this portgroup, you will need to reference this later - if you have set '0' then it will not be tagging for a specific VLAN. Note which vmnic[i]X[/i] is listed as the uplink.

    3)[/b] Check the current Virtual Switch Configuration, by executing the following command: esxcfg-nics -l[/b]

    This command will provide a list of the current network adapters and their status. Look for the vmnic which was listed as the uplink for the "Service Console" portgroup in step 2 above (usually vmnic0). Check that the Link Status is listed as Up, also verify the Speed and Duplex settings. Check that the speed and duplex settings match the configuration of your switch (try setting the ports to autovnegotiate to start the troubleshooting process). Also note the Description of the adapter (is this the adapter that you intended to use for the Service Console, if so, is this adapter connected to the switch - on the intended switch port, and is the switch port configured correctly? If the "Service Console" portgroup VLAN ID, in step 2 above, was set to something other than '0' - is your switch (port) properly configured to handle network traffic for this VLAN?

    4)[/b] After checking all of the above steps, try running some Ping commands to verify connectivity, see below (substitute your configuration info for italicized text):

    a) ping 127.0.0.1[/b]

    b) ping yourESXHostIP[/i][/b]

    c) ping yourESXHostIPGateway[/i][/b]

    d) ping yourVCServerIP[/i][/b]

    You should be able to at minimum ping the local IP Address of the ESX Host (step two). If you can't ping your gateway, then you do not have connectivity to your network.

    If you can ping the gateway, but not the IP Address of the VirtualCenter Server, it is possible that your ESX Host and the VC Server are on two different networks. If this is the case, check that the correct physical network adapter being used for connectivity by the Service Console Connection (vswif0) is physically connected to your network. (I don't know how many times I have verified the configuration of the ESX server and spent an hour troubleshooting, only to find that the client has patched in the wrong physical network adapter to the switch, not understanding which physical network adapter was being used by the service console - see step 3 above). Check the configuration of your Switch (port) - ie VLAN config, etc.

    Let me know if you have any questions about the above. There are other things you can do to troubleshoot, but would be too complicated to list all scenarios (obviously), so try the above and post your findings.

  • RELEVANCY SCORE 3.04

    DB:3.04:Unable To Access The Specified Host kc



    Hi,

    Im trying to connect an esx host 2.5.x box back to my virtual center after upgrading my virtual center server and I get the error message

    "unable to access the specified host. It either does not exist, the server software is not responding, or there is a network problem"

    I have the choice to remove the server and then try to reconnect, I am reluctant to do this because I have things like VMotion configured and have two MSCS virtual servers each with a foot in each esx box.

    Just wondering if anyone has seen this problem before and what the best course of action to take is??

    Regards

    Dave

    DB:3.04:Unable To Access The Specified Host kc


    I found that I was getting that error because my root partition was out of space. I freed up some space and was able to reconnect the server.

  • RELEVANCY SCORE 3.04

    DB:3.04:Cannot Connect To Esx Via Virtual Center xm



    I have a machine that was running an evaluation copy of virtual center. The evaluation license expired before I could get the evaluation extended. I am now trying to get Virtual center working again but am having an issue. I uninstalled Virtual Center server on this machine and re-installed (during this process I also deleted the old database). Now when I try to open virtual center and log into Virtual Center I get the messages "Bad username/password" or "Cannot connect to host ...: No connection could be made because the target machine actively refused it".

    What do I need to do to fix this?

    Thanks.

    DB:3.04:Cannot Connect To Esx Via Virtual Center xm


    Yippeeee!!!!! I installed VC on a different box and it worked fine. Looks like the uninstall didn't remove everything from the original server.

    Thanks to everyone for all of the help.

  • RELEVANCY SCORE 3.03

    DB:3.03:Removing Virtual Center Agents From Esx Host fk



    Hello,

    I have an ESX hsot which was previously managed by Virtual Center. I've removed the Virtual Center server but a message now remains each time I open the VI Client to the host - "This host is currently being managed by the VirtualCenter with IP address....".

    How can I remove all traced of the Virtual Center interface with my ESX host?

    Thanks

    DB:3.03:Removing Virtual Center Agents From Esx Host fk


    You should uninstall host agent.

    The answer (how to) is written here:

    http://www.vmware.com/community/thread.jspa?messageID=707920#707920

  • RELEVANCY SCORE 3.03

    DB:3.03:Removing A Host From A Cluster ap


    Hello,

    I have Cluster in my Virtual Center with 3 ESX Hosts. I am wondering what would happen if I remove one of the hosts from the cluster? Would all the settings, VMs, Network settings will still be on that host when I add it back into the Cluster?

    I reason I am asking is that, I want to add another (4th) ESX host to Virtual Center to make use of the Update Manager then remove it afterward. I only have 3 licenses for Virtual Center so only 3 Host can exist at the same time. The 4th ESX is running in another Cluster in Lab Manger which also has 3 Hosts and not manage by Virtual Center. It is a pain trying to patch these manually.

    Is this possible? What would be the risks?

    Thanks,

    DB:3.03:Removing A Host From A Cluster ap


    Only concern is your 2 other ESX hosts can handle all the VMs, since the 3rd one is in maintenance mode and migrated their VMs to others, make sure it can handle it and add your 4th host quickly and configure HA DRS so it can load balance your resource precisely or migrated manually. Once your Update Manager patcheds 4th host, than do whatever you need.

    If you found this information useful, please consider awarding points for "Correct" or "Helpful". Thanks!!!

    Regards,

    Stefan Nguyen

    iGeek Systems Inc.

    VMware, Citrix, Microsoft Consultant

  • RELEVANCY SCORE 3.02

    DB:3.02:Can't Add Esx Hosts To My Cluster xs


    Hi ,

    Our customer has 5 ESX 3.5 server and they are using Virtual Center 2.5.They didn't have DRS HA Custer. Today i have created a new cluster and i am trying to add hosts to this cluster. I entered username and password ( the are correct ). When i press Next button in Ready to Complete screen i am getting " The host XXXXXX is already connected to Virtual Center server" message. You may find the error in the attachement.

    Please help me ASAP

    DB:3.02:Can't Add Esx Hosts To My Cluster xs


    Looking at your screenshot the ESX host botoesx05 is already connected to the VC instance - it's the host just below the cluster you configured. Out of interest, why didn't you just drag and drop the host into the cluster? Looking at the screenshot you've got the host as disconnected in the cluster but connected just below it.. You might want to remove the disconnected host in the cluster and drag the already connected one in.

    Thanks,

    Neil

  • RELEVANCY SCORE 3.02

    DB:3.02:Vmware Server Monitoring And Virtual Center 1j



    Is it possible to add and monitor a VMware Server host into Virtual Center?

    DB:3.02:Vmware Server Monitoring And Virtual Center 1j


    Check out the VirtualCenter 1.4 beta program if you are interested in testing this out. It's posted under the announcments section of this form.

  • RELEVANCY SCORE 3.02

    DB:3.02:Virtual Center Can't Communicate With Nat Esx Host fx



    We have a Virtual Center 2.0.2 Server on our internal network and an ESX 3.0.1 host on our DMZ that we are trying to manage with that Virtual Center.

    We opened the necessary ports and are doing NAT to facilitate the communication across the firewall. We opened TCP 27000/27010 for the License Server -- that part appears to work fine. We also opened TCP/UDP 902 between them for Virtual Center.

    I'm able to add the ESX host from the Virtual Center; it shows up and I'm able to access the VMs' consoles and whatnot ... but performance data is not showing up. After about 15-30 seconds, the ESX host shows up as disconnected in Virtual Center.

    I'm able to ping the internal Virtual Center host from the DMZ-bound ESX host's service console using both its DNS name and its NAT IP address. The problem appears to be that the ESX host on the DMZ is trying to talk to the Virtual Center over UDP 902 using its internal IP address, ignoring the NAT all together. Our network administrator says he sees inbound traffic at the DMZ firewall from the ESX host over UDP 902 trying to connect to the Virtual Center using its internal IP address; that same message appears every 10 seconds and it's obviously being dropped, since it's trying to connect to the internal IP rather than the NAT IP.

    We believe that the problem is that the internal host's application layer (Virtual Center) is telling the DMZ host's application layer (ESX) to connect to its internal IP address, hence failing to take the NAT into account.

    Has anyone else seen this? Any idea how to fix this from the Virtual Center and/or ESX side?

    DB:3.02:Virtual Center Can't Communicate With Nat Esx Host fx


    Hello,

    I see two problems... One, your Service Console resides in your DMZ... While the VMs can be in your DMZ, placing the SC in your DMZ is asking for serious trouble. Do you place the door to your Datacenter off your lobby? In effect this is what you have done with the SC. Remember if anyone gets access to your DMZ (which is most likely possible) then they have a good chance of having lots of attack points for the SC and once in the SC, they can access ANY VM on the host or on a LUN connected to the host. If this is dictated by your security team then they truly do not understand ESX and how it is secured.

    The 2nd point is that NAT would not be the way to go as you have to have your firewall forward a number of ports back and forth and if your firewall does not support connection tracking (which none do at the moment for VC traffic) you will have the problems you are seeing.

    I suggest you remove the SC from the DMZ and place it inside your internal networks, and that will fix both issues.

    Best regards,

    Edward

  • RELEVANCY SCORE 3.01

    DB:3.01:Migrating Virtual Machines From Windows 2012 Host To Windows 2012 R Host 1f


    I'm trying to use System Center 2012 R2 to migrate virtual machines from Windows 2012 host to Windows 2012 R2 host, but when I try to add Windows 2012 host to my System Center 2012 R2, I get the following error message:
    Error (408)
    servernamehas an unsupported version of the Virtual Machine Manager agent installed.
    Recommended Action
    Uninstall the Virtual Machine Manager agent using Add or Remove Programs on
    servername, and then try the operation again.
    I am not sure if I should use install Local Agent option from my System Center 2012 R2 installation disc or not. I actually tried that and then a message Uninstall this product? comes up.
    I do not want to lose or damage my virtual machines in any way, but merely to upgrade the VMM on their host so I can migrate them to the other server.
    Can I do that and if yes what is the best way to do that without any harm to my virtual machines?

    DB:3.01:Migrating Virtual Machines From Windows 2012 Host To Windows 2012 R Host 1f

    This is the behaviour I found when reassociating a Hyper-V 2012 host with a 2012 R2 VMM server after attempting to reassociate with the same error as above.
    1. In SCVMM 2012 SP1 I removed the record of the Hyper-V host from SCVMM (remove option not delete)
    2. I found this uninstalled the SCVMM agent on my host Hyper-V server but left the SCVMM DHCP component which I then manually removed.
    3. I then re-ran my failed task in SCVMM 2012 R2 which installed the agent, imported configured logical networks and VM Networks from the Hyper-V host.
    4. Started managing hosts in SCVMM 2012 R2.

  • RELEVANCY SCORE 3.01

    DB:3.01:Virtual Center: Credentials Fail When Trying To Add Host To Virtual Center d9


    I have successfully joined an ESX host to my Virtual Center, but my two hosts running on W2K3 return authentication failure. I have tried the local administrator credential and a domain administrator credential, but neither is accepted. Any suggestions on the type of credential it is looking for?

    Thanks!

    JohnD

    DB:3.01:Virtual Center: Credentials Fail When Trying To Add Host To Virtual Center d9

    What versions of VMware Server Virtual Center?

    VMware Server 2.0 is still in beta, and is not yet fully supported attaching to VC2.5. VMware Server 1 can be managed with VC1.4.

  • RELEVANCY SCORE 3.01

    DB:3.01:Problem Adding A Host To Vc2 7j



    Hi

    im trying to add two esx 2.5.3 hosts to my VC2 inventory...

    first i was getting the "Failed to install the Virtual Center agent service" while trying to connect to the hosts from VC, then i installed the vpx-upgrade-esx-5-linux-27704 on both hosts manualy.

    one of the got connected, the other still shows the same error message, i already rebooted after aplying the update, but its not letting me connect to the host from vc

    id appreciate little help on this

    thank you.

    DB:3.01:Problem Adding A Host To Vc2 7j


    ty.

    i added the host again to virtual center 1.4 and something strange happens. they connect and disconnect automatically after a few seconds.

    anyway i removed again the servers from VC 1.4's inventory and tried to add again in the VC 2's one but same behaviour... i can succesfully add only one of them, the other yet shows the "fail to install vc agent service" message.

    this is giving me a real pain

    help pls

  • RELEVANCY SCORE 3.01

    DB:3.01:How To Remove Esx 3.5 Host From Virtual Center ks


    Cannot find any info on how to remove esx host from virtual center.

    How to do it?

    Thx.

    DB:3.01:How To Remove Esx 3.5 Host From Virtual Center ks

    Sorry, for the Vcenter we have a "vCenter Server 4 Foundation" Licence. And for the Hosts we have "vSpehre 4 Enterprise (1-6 Core per CPU).

  • RELEVANCY SCORE 3.01

    DB:3.01:Virtual Machine Hidden Run ka


    Can you run virtual machine without beeing visible through virtual center or directly on host with vi client ?

    regards, Matjaz

    DB:3.01:Virtual Machine Hidden Run ka


    I was thinking of it, but somehow I do not see how it would be possible

    If they are Windoze machines, then you can hide them from workgroup visibility if you have shares accessible, then can also hide them

    Seb

  • RELEVANCY SCORE 3.01

    DB:3.01:Cannot Add Host To Virtual Center pa



    Hello,

    I have a new installation of Virtual Center, with licensing server configured on the same host. Running great!

    I have just finished installing ESX Server 3.0 on a new server. Runnin Great!

    I am now trying to add the new host to Virtual Center using the VI client. Not so greate.

    I can get through the 'Add Host' wizard, then after confirming the settings, etc, I get the following error:

    "There are not enough licenses installed to perform the operation"

    The Admin - Licenses tab in the VI client show that I have 16 remaining licenses for ESX Server Standard out of 16 total.

    This is the evaluation version, which I just downloaded 7/31.

    I need to get this going to do some validation testing to finish winning over some senior devs, once this is done we'll be BUYING!

    Any idea what's going on?

    Thanks,

    Mike

  • RELEVANCY SCORE 3.01

    DB:3.01:Update Manager Error 8d


    For the past few days, I keep getting this error in Virtual Center while trying remediate a host:

    "Your session with the VMware Update Mangager Server is no longer valid. The VMware Update Manager Client plugin will be unloaded from the VI Client."

    This occurred this morning when it was about 60% throught the Ciritical updates (I was not doing the non-critical.)

    Any idea of what's causing this? I can add the plug-in back in, but VC still thinks it's trying to remdiate even though it's not. The "Scan for updates" and "remediate" options are now grayd out for the host. Virtual Center now has to be rebooted to get it back to where I can run Update Manager.

    btw, this is Virutal Center 2.5 and the hosts are 3.5

    DB:3.01:Update Manager Error 8d

    I get the same error once a day, but don't know the cause. I've seen a bunch of post with user having the same issue too.

    You can try stop/starting the virtual center service to avoid a reboot.

  • RELEVANCY SCORE 3.01

    DB:3.01:Must Trade Ip For Vcenter And Host ms


    Hello!

    Please, I need to trade the IP adresses for virtual center and esx host.

    My Virtual Center IP is 92.128.110.58

    My ESX Host IP is 92.128.110.57

    I need to trade them, turning my cenario in the following configuration:

    Virtual center: 92.128.110.57

    ESX Host: 92.128.110.58

    PS. My virtual center is a Virtual Machine inside the ESX host that I want to trade the IP.

    Any ideas in how to do this without mess my virtual center(virtual machine) and my esx host?

    Thanks a lot.

    Carlos.

    DB:3.01:Must Trade Ip For Vcenter And Host ms


    Probably to make things easier I would remove the ESX host form VC - use the VI client and connect directly to your ESX host and power down you the VC VM - Change the IP Address of the ESX host - you can do this by lmodifying the properties of the vmkernel port on vSwitch0 - you can modify the vm as well form but I would make sure it is connected to an internal switch until you change the IP address -

  • RELEVANCY SCORE 3.00

    DB:3.00:Vi Client Cannt Connect To Host 1x



    Hi all!

    I am new with VMWARE. We have installed VI Server on the same computer running VMWARE Server....

    During Virtual Center Server installation, I have specified the following ports to be used:

    VI Web Service https: 4443

    VI Web Service HTTP: 8080

    Virtual Center Port (TCP): 9902

    Virtual Center Hearbeat (UDP):9902

    I have stopped the following VMARE Server Services:

    Registration Service

    Authorization Service

    in order to avoid problems with Virtual Center.

    When I connect using VI Client, I get the following error:

    Cannot connect to host \[IP ADDR]. No se ha podido establecer la conexion porque el equipo destino ha denegado activamente dicha conexion (target host refused connection)

    I dont know If it is possible to install Virtual Center with VMWARE Server.

    And...

    How VI Client knows the Virtual Center connection port???

    Which is the problem with my VI Client???

    Thanks in advance and best regards

    DB:3.00:Vi Client Cannt Connect To Host 1x


    The problem is I have changed ports in installation of VC Server.

    If ports are changed, I can imagine you have to indicate VI Client ports are not default ports...

    Of course, the first of all before asking the forum is pinging the server and ensureing VC Server service is running....

    Regards ,

    JJ.-

  • RELEVANCY SCORE 3.00

    DB:3.00:Vmware Converter Problem jc



    When I try to convert a physical computer, everything works fin, until I have to select datastore. Then I get "Unable to find server".

    I do have contact with the physical computer, Virtual Center and my VMware host.

    I get the same error message when trying to convert to the VMware host direct.

    Please help.

    Rolf

    DB:3.00:Vmware Converter Problem jc


    It's almost always DNS. Try selecting your destination server by IP address or fully-qualified server name.

  • RELEVANCY SCORE 3.00

    DB:3.00:Add Virtual Server Host To Virtual Infrastructure Problem 1z



    When I try to add my newly installed Virtual Server to my Virtual Center 2.x, I get an error

    Adding seems to work fine and the host is detected, and the virtual machines are listed during the addition, but immediatly after the connect host wizard I see the error

    "Connection failed for myvmhos.domain.com in DC: Failed to configure management account.

    I can connect directly to the Virtual Server using the Virtual Server windows client, and the web interface works fine.

    DB:3.00:Add Virtual Server Host To Virtual Infrastructure Problem 1z


    When I try to add my newly installed Virtual Server to my Virtual Center 2.x, I get an error

    Adding seems to work fine and the host is detected, and the virtual machines are listed during the addition, but immediatly after the connect host wizard I see the error

    "Connection failed for myvmhos.domain.com in DC: Failed to configure management account.

    I can connect directly to the Virtual Server using the Virtual Server windows client, and the web interface works fine.

  • RELEVANCY SCORE 3.00

    DB:3.00:Cant Able To Add Hyper-V Host s7


    Hi All,

    I am trying to add hyper-v host to VMM .
    But its showing following error.
    Error (415)
    Agent installation failed copying C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\agents\I386\3.0.6005.0\msiInstaller.exe to \\SystemCenterSM.contoso.com\ADMIN$\msiInstaller.exe.
    The network path was not found.
    Both the Hyper-v machine,VMM machine and the host machine are in same domain.
    Please help me out...

    DB:3.00:Cant Able To Add Hyper-V Host s7

    Hi, please check if SystemCenterSM.contoso.com - can be resloved by DNS FQDN (NSLOOKUP) - The Windows Firewall allows the required communication ports for SCVMM agent installation - The account used to install the SCVMM agent has local administrative permissions
    on SystemCenterSM.contoso.comregards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • RELEVANCY SCORE 3.00

    DB:3.00:Vmware Api For Creating An Deleting Disk Via Vcenter c9



    I am working on a C# application and trying to execute the tasks of creating and deleting the virtual disks, when the stated host is being managed by vCenter.

    But getting an error as:

    VimApi.NotImplemented

    and The requested operation is not supported by the server.

    Is this the case, wherin the creation and deletion of virtual disks is not suported via Center or is there a way around ?

    DB:3.00:Vmware Api For Creating An Deleting Disk Via Vcenter c9


    Hi,

    It seems you are using VirtualDiskManager managed object to create/delete disks. Currently, VirtualDiskManager is not implemented on VC and is only available when connected to ESX directly.

    As a workaround you can create new disks and delete the existing disks corresponding to VMs by making use of ReconfigVM_task API, and set the required props in the VirtualMachineConfigSpec.

    I hope this helps!

    Angela.