• RELEVANCY SCORE 4.14

    DB:4.14:Unable To Access File Unspecified Filename Since It Is Locked kd





    Проблема такая ) машинка не выключалась - зависла на 95 % я её погасил через vm-support -X

    since it is

    locked

  • RELEVANCY SCORE 4.12

    DB:4.12:Trouble Cloning Vm 8m





    I'm trying to clone a VM and get an error that says, "Unable to access file unspecified filename since it is locked". What file is the error referring to?

    Thanks.

    DB:4.12:Trouble Cloning Vm 8m


    I re-cloned the VM, but didn't modify the drive size, and it worked. Odd.

    Also, there are no snapshots.

  • RELEVANCY SCORE 4.12

    DB:4.12:Can`T Delete Snapshot From Console / Unable To Access File Unspecified Filename Since It Is Locked jp





    Hi, have a problem with a snapshot.

    We use vRanger for backups. Suddenly we have a snapshot named "Consolidated Helper- 0". I`vetried to delete this snapshot but it fails with the following error message in vCenter: "Unable to access file ')

    }

    If i than try again to remove the snapshot over the console it seems to work but alle files of the snapshots are still existing an the LUN running soon out of space if i'am not able to remove the snapshot files.

    In the vmx file of the vm the vmdk are shown to the snapshot files and not to the original disk files....

    Hope someone could help.

    Thanks and regards

    woisch

    DB:4.12:Can`T Delete Snapshot From Console / Unable To Access File Unspecified Filename Since It Is Locked jp

    I`ve solved the problem by cloning the machine and then manually delete the files from console. But not all files i`m able to delete. In my case this machine was the only on the LUN. I`ve unassigned the LUN from all servers, assigned to one esx host and then i was able to delete the files because they were not locked anymore.

  • RELEVANCY SCORE 3.74

    DB:3.74:Can't Migrate/Snapshot/Consolidate/Clone A Vm Due To z9



    I get the error "Unable to access file unspecified filename" when I try to do a migrate, clone or snapshot (they all involve doing a snapshot so I'm guessing this is why). The esxi host 5.0, same NFS volume for source and destination (fails just the same when trying to move to a local datastore). VM works fine on its share. No 3rd party backup software was used.

    vSphere error:

    Clone virtual machine

    Unable to access file unspecified filename

    Time: 10/16/2013 6:53:04 PM

    Target: db01.domain.com

    vCenter Server: WIN-CAT

    relevant vmware.log section for that vm during a clone attempt:

    http://pastebin.com/raw.php?i=KAR1B2Zj

    DB:3.74:Can't Migrate/Snapshot/Consolidate/Clone A Vm Due To z9


    So, turns out somehow the esxi host got corrupted (no idea how) and had mounted its vfat partitions on each drive... this was compounded by some NFS issues on that particular host. Restarted the host (had to take guest vm's down unfortunately as migration wouldn't work), came back up and was able to migrate again. Had to wipe and reinstall esxi on this host. Not the best outcome, but it seems it was a combination of NFS and visorfs.

  • RELEVANCY SCORE 3.72

    DB:3.72:Unable To Access File As Its Locked df


    hi,

    unable to access file as its locked.

    DB:3.72:Unable To Access File As Its Locked df


    What file are you trying to acess? If it is the VMDK perhaps the VM is powered on -

    If you find this or any other answer useful please consider awarding points by marking the answer correct or helpful

  • RELEVANCY SCORE 3.71

    DB:3.71:Unspecified Error When Attempting To Connect To Ms Access (2003) 1k


    In beta 2, attempting to connect to existing local mdb results in message 'Unspecified Error', andno other options or settngs are available to do so. I know, Accessis not cool, but I need to do it in this instance.
    Method tried: In Server explorer, right click Data Connections, Add Connections..., Change.., Select MS Access,Browse tolocal file, Test.
    Big attaboy to first responder.

    DB:3.71:Unspecified Error When Attempting To Connect To Ms Access (2003) 1k

    When MS says uninstall Beta 1 first they mean it. After uninstall and re-boot, connection was made using method described. Thanks Jon for the reply.

  • RELEVANCY SCORE 3.63

    DB:3.63:Trouble With Unattended Installation Of Odp.Net mj


    One of my clients is requesting that I install ODP.NET automatically. We're using the 9.2.4.0.1 version, and install ODP.NET and Oracle Services for MTS with response files created with the -record flag. And on some computers (I still have not found any precise pattern for this), our ASP.NET application cannot connect to the database, though a command line application can. The ASP.NET account has all required access to Oracle directories (read and execute). But there's more : when I catch the exception, I cannot get the Message property : it raises a NullReferenceException. Thus, I cannot get any error message. I have tried to trace the application, but it doesn't say much :

    TIME:2007/ 3/13-18:43:48:993 TID: de8 (ENTRY) GetRegTraceInfo()
    TIME:2007/ 3/13-18:43:48:993 TID: de8 (EXIT) GetRegTraceInfo(): RetCode=0 Line=445
    TIME:2007/ 3/13-18:43:48:993 TID: de8 (ENTRY) OracleConnection::OracleConnection(2)
    TIME:2007/ 3/13-18:43:49: 9 TID: de8 (EXIT) OracleConnection::OracleConnection(2)
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (ENTRY) OracleConnection::Open()
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (ENTRY) OpsConAllocValCtx()
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (EXIT) OpsConAllocValCtx(): RetCode=0 Line=129
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (ENTRY) OpsConOpen()
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (ENTRY) OpsConClose()
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (EXIT) OpsConClose(): RetCode=0 Line=562
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (ENTRY) OpsConDispose()
    TIME:2007/ 3/13-18:43:49: 24 TID: de8 (EXIT) OpsConDispose(): RetCode=0 Line=697

    Then, on a machine where it doesn't work, I have installed version 9.2.0.7. It still doesn't work, I still don't get any error message, but the trace has some more information :

    13-19:21:30:191 T:0d14 (ENTRY) GetRegTraceInfo()
    13-19:21:30:191 T:0d14 (EXIT) GetRegTraceInfo(): RetCode=0 Line=533
    13-19:21:30:191 T:0d14 (ENTRY) OracleConnection::OracleConnection(2)
    13-19:21:30:207 T:0d14 (EXIT) OracleConnection::OracleConnection(2)
    13-19:21:30:207 T:0d14 (ENTRY) OracleConnection::Open()
    13-19:21:30:207 T:0d14 (ENTRY) OpsConAllocValCtx()
    13-19:21:30:207 T:0d14 (EXIT) OpsConAllocValCtx(): RetCode=0 Line=134
    13-19:21:30:207 T:0d14 (ENTRY) OpsConOpen()
    13-19:21:30:207 T:0d14 (ENTRY) OpsConAddRef(): (c0f6c90)=0
    13-19:21:30:207 T:0d14 (WARN) OpsConAddRef(): Failed If cond: (c0f6c90)=0 {c154908}=0 {0}=1 {c0f3700}=0
    13-19:21:30:207 T:0d14 (ENTRY) OpsConClose(): (c0f6c90)=0
    13-19:21:30:207 T:0d14 (EXIT) OpsConClose(): RetCode=0 Line=569 (c0f6c90)=0
    13-19:21:30:207 T:0d14 (ENTRY) OpsConDispose(): (c0f6c90)=0
    13-19:21:30:207 T:0d14 (ENTRY) OpsConRelRef(): (c0f6c90)=0
    13-19:21:30:207 T:0d14 (WARN) OpsConRelRef(): Failed If Cond: (c0f6c90)=0 {c154908}=0 {0}=1 {c0f3700}=0
    13-19:21:30:207 T:0d14 (EXIT) OpsConRelRef(): RefCount=0 RetCode=0 Line=1833 (0)=0
    13-19:21:30:207 T:0d14 (EXIT) OpsConDispose(): RetCode=0 Line=711

    The dlls are in the GAC and in the bin directory as they should be. It has happened on Windows XP and Windows Server 2003. It has happened whether there already was a 9.2.0.4 Oracle client installation or not.

    To solve the problem, we uninstall every Oracle product on the machine, and install it "by hand", which means without response file. These errors only happen when using a response file. Here are the response files we use for ODP.NET :

    [Gnral]
    RESPONSEFILE_VERSION=1.7.0

    [SESSION]
    UNIX_GROUP_NAME=
    FROM_LOCATION="..\..\stage\products.jar"
    FROM_LOCATION_CD_LABEL=Value Unspecified
    NEXT_SESSION=false
    NEXT_SESSION_RESPONSE=Value Unspecified
    ORACLE_HOME=C:\ORACLE\ORA9i
    ORACLE_HOME_NAME=OraHome9i
    APPLTOP=Value Unspecified
    APPLTOP_NAME=Value Unspecified
    TOPLEVEL_COMPONENT={ODP.NET,9.2.0.4.01}
    DEINSTALL_LIST={ODP.NET,9.2.0.4.01}
    SHOW_SPLASH_SCREEN=false
    SHOW_WELCOME_PAGE=false
    SHOW_COMPONENT_LOCATIONS_PAGE=false
    SHOW_CUSTOM_TREE_PAGE=false
    SHOW_SUMMARY_PAGE=false
    SHOW_INSTALL_PROGRESS_PAGE=true
    SHOW_REQUIRED_CONFIG_TOOL_PAGE=false
    SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
    SHOW_RELEASE_NOTES=false
    SHOW_ROOTSH_CONFIRMATION=false
    SHOW_END_SESSION_PAGE=false
    SHOW_EXIT_CONFIRMATION=false
    NEXT_SESSION_ON_FAIL=false
    SHOW_DEINSTALL_CONFIRMATION=false
    SHOW_DEINSTALL_PROGRESS=false

    [ODP.NET_9.2.0.4.01]
    SELECTED_LANGUAGES={fr,en}
    INSTALL_TYPE=Personnalise
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_gacutilPath=
    b_OracleRSFInstalled=true
    b_IsDynamicHelpInstalled=false
    b_DotNetFrameworkSDKIsInstalled=false
    b_DotNetFrameworkIsInstalled=true
    b_CorrectOracleClientIsInstalled=true
    bWin2kFixExists=false
    [oracle.p2k.oledb_9.2.0.4.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    bWin2kFixExists=Value Unspecified

    [oracle.p2k.oo4o_9.2.0.4.8]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    bWin2kFixExists=Value Unspecified

    [oracle.p2k.odbc_9.2.0.5.4]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_OPSSelectedNodes=Value Unspecified
    bWin2kFixExists=Value Unspecified

    [oracle.cartridges.ordmts_9.2.0.4.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_recodServiceRegKey2=Value Unspecified
    s_recodServiceRegKey1=Value Unspecified
    s_recodHTTPPort=Value Unspecified
    n_currinstId=Value Unspecified
    bWin2kFixExists=Value Unspecified

    [oracle.swd.jre_1.3.1.1.0a]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_OPSSelectedNodes=Value Unspecified

    [oracle.networking.netclt_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_cfgtyperet=Value Unspecified
    s_bundleName=Value Unspecified
    b_rdbmsInstalling=Value Unspecified
    b_net8ServerInstalling=Value Unspecified
    b_launchNETCA=Value Unspecified
    b_javavmIsInstalling=Value Unspecified
    b_cmanIsInstalling=Value Unspecified
    b_anoIsInstalling=Value Unspecified
    s_netCAInstalledProducts=Value Unspecified

    [oracle.networking.netca_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_responseFileName=Value Unspecified
    s_netCAInstalledProtocols=Value Unspecified
    s_netCAInstalledProducts=Value Unspecified
    s_cfgtyperet=Value Unspecifiedn
    b_launchNETCA=Value Unspecified

    [oracle.rsf_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_serverInstallType=Value Unspecified
    s_bundleName=Value Unspecified

    [oracle.rsf.nlsrtl_rsf_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_serverInstallType=Value Unspecified

    [oracle.options.ops.opsca_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_serverInstallType=Value Unspecified
    s_cfgtyperet=Value Unspecified

    [oracle.rsf.xdk_rsf_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_bundleName=Value Unspecified

    [oracle.rsf.rdbms_rsf_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_bundleName=Value Unspecified

    [oracle.rsf.ssl_rsf_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_bundleName=Value Unspecified

    [oracle.rsf.net_rsf_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_bundleName=Value Unspecified

    [oracle.install.instcommon_9.2.0.1.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_OPSSelectedNodes=Value Unspecified

    [oracle.swd.oui_2.2.0.18.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    InstLocProp=Value Unspecified

    [oracle.swd.jre_1.1.8.16.0]
    DEPENDENCY_LIST={}
    OPTIONAL_CONFIG_TOOLS={}
    s_OPSSelectedNodes=Value Unspecified

    I really don't know what to do now ! Any help will be greatly appreciated.

    DB:3.63:Trouble With Unattended Installation Of Odp.Net mj

    Oops,

    try {
    ...
    }
    catch(Exception ex) {
    Console.WriteLine(ex.Message); // not ex.StackTrace
    }

  • RELEVANCY SCORE 3.47

    DB:3.47:Please Urgent Help Needed.........Cant Open Downloads !! 9a


    After the download completes i am unable to open any file.....its says this.....THIS IS THE MESSAGE........SAFARI CAN'T OPEN THE FILESAFARI CAN'T OPEN THE FILE "filename" BECAUSE "filename" HAS MOVED SINCE YOU DOWNLOADED IT.

    DB:3.47:Please Urgent Help Needed.........Cant Open Downloads !! 9a

    After the download completes i am unable to open any file.....its says this.....THIS IS THE MESSAGE........SAFARI CAN'T OPEN THE FILESAFARI CAN'T OPEN THE FILE "filename" BECAUSE "filename" HAS MOVED SINCE YOU DOWNLOADED IT.

  • RELEVANCY SCORE 3.42

    DB:3.42:Cannot Create A Snapshot With 2tb Virtual Disk? 3d



    I have a virtual file server with a 2TB virtual disk (vmdk). When I try to create a snapshot of the system (in order to back it up), I get the following error:

    File unspecified filename is larger than the maximum size supported by the datastore 'unspecified datastore.

    The datastore which the file server is located on is formatted with VMFS 5.54 with 1MB block size. It is a 12TB datastore with about 6TB free.

    DB:3.42:Cannot Create A Snapshot With 2tb Virtual Disk? 3d


    That's correct. If you want to take a snapshot, then the maximum size is 2032 GB. And that's the case even if you thin provision the disk.

  • RELEVANCY SCORE 3.34

    DB:3.34:Ft Secondary Vm Power On Failure 8c


    I had a vm running with FT in a two node HA cluster. To demonstrate failover, I simulated power failure on the node running the FT vm (by holding the power button), and viola, vm failed over and didn't skip a beat.

    Apparently, power failure is a bad option to demonstrate FT since i destroyed my ESXi host and had to repair. Repair went well, rejoined my cluster, reconfigured HA, but FT will not properly configure. I have turned FT off and back on my vm, but when I go to power on, the primary powers up fine, but the secondary vm gives this error:

    "Unable to access file lt;unspecified filegt; since it is locked."

    My Fault Tolerance Status shows "Not protected. Need seconday vm"

    I'm running in eval mode on an NFS share.

    Has anyone seen this behavior? Why can't vcc spit out what file is locked?

    DB:3.34:Ft Secondary Vm Power On Failure 8c


    Success! My hosts reboot without PANIC attacks and I can enable FT on my vms.

  • RELEVANCY SCORE 3.20

    DB:3.20:Db With Shared Files Won't Power On After Migration f7



    I have a pair of Oracle databases that share files on the same LUN. The lun is going end of service life at the end of this year, so I have moved all of the VMs to new luns.

    When it was time to move the databases, I powered off the first, and migrated it to the new lun, then powered it back on. No problem. Then I powered down the second DB and did the same thing. However, when I attempt to power it back up, I get the error "Unable to access file unspecified filename since it is locked"

    There are about 10 vmdk_flat files that are locked and preventing the power up. I have already tried everything I could find to release the locks, including putting the ESX host into maintenance mode and rebooting it. The files still remain locked.

    Any ideas on how I can power up this second db? This is on ESX 4.0.

    DB:3.20:Db With Shared Files Won't Power On After Migration f7


    I have a pair of Oracle databases that share files on the same LUN. The lun is going end of service life at the end of this year, so I have moved all of the VMs to new luns.

    When it was time to move the databases, I powered off the first, and migrated it to the new lun, then powered it back on. No problem. Then I powered down the second DB and did the same thing. However, when I attempt to power it back up, I get the error "Unable to access file unspecified filename since it is locked"

    There are about 10 vmdk_flat files that are locked and preventing the power up. I have already tried everything I could find to release the locks, including putting the ESX host into maintenance mode and rebooting it. The files still remain locked.

    Any ideas on how I can power up this second db? This is on ESX 4.0.

  • RELEVANCY SCORE 3.20

    DB:3.20:Unable To Share The Internet Connection And The Error Is Cannot Enable Shared Access 0x80004005 Unspecified Error. 9s


    Original Title: when ever I try to share my internet connection error message comes : "cannot enable shared acess 0x80004005 : unspecified error"
    I am using USB dongle ... when I tried to share this connection via LAN this error was coming

    DB:3.20:Unable To Share The Internet Connection And The Error Is Cannot Enable Shared Access 0x80004005 Unspecified Error. 9s

    [Solved]

    Okay i figured out a way which works for me,
    I have comodo firewall and kaspersky AV.
    Which i turned off

    Then went to services.msc and found all those above mentioned services were set to automatic and started.

    Then i remembered about windows firewall (firewall.cpl) and saw its disabled or service is stopped

    So, i went back to services.msc and started "Windows Firewall" Service and tried sharing my dongle connection once again, Now everything is seamless. No more Errors.

    Hope this Solves the Problem.

  • RELEVANCY SCORE 3.14

    DB:3.14:Locked Vm After Attempt To Datastore Vmotion as



    Using vsphere 4.0.0 build 208111. I tried to storage-vmotion a vm with one small (40GB) and one large (2TB) vmdk file. After trying for several hours, it crashed (I have lost the error message because I have removed it from the inventory and added it back, trying to fix the next issue - it appears to have wiped the logs or something). I then tried to power it on again (still on the old storage). It won't power on and says:

    Power On virtual machine

    GUESTNAME

    Unable to

    access file

    unspecified

    filename

    since it is

    locked

    System

    VSPHEREserver.ourdomain

    4/27/2010 9:53:59 AM

    4/27/2010 9:53:59 AM

    4/27/2010 9:55:04 AM

    I have looked on the ESX server that claims to host it for .lck files and no luck. Looked in the datastore for lock files - nothing.

    So now I can't move the guest and can't start it.

    Help!!

    jj

    DB:3.14:Locked Vm After Attempt To Datastore Vmotion as


    Following a suggestion from someone on the web, I rebooted the VCentre Server and that fixed it.

  • RELEVANCY SCORE 3.13

    DB:3.13:Problems With Esxi 4.1 And Snapshopts From Backup m1



    Hi all,

    i have a problem with our backup Software. We tested the software VEEAM and now the license expired and we ran into an error.

    The customer didnt order the license and the trial period exeeded now.

    The Software uses the snapshot technology to successfully back up the servers.

    After the backup, the snapshot will be deleted and the new files are committed into the vmdk file.

    But this is only theory :-( the snapshots wont be deleted anymore.

    Whe i browse the datastore i can see 8 snapshots but in the snapshot manager from the virtual machine there is no one listed.

    I tried to manually create a snapshot. Then i can see the following szenario in snapshot manager:

    Computername

    |

    - Consolidate Helper - 0

    |

    -manually created Snapshot

    |

    - you ar here

    When i try to delete all snapshots i only recieve an error:

    Unable to access file unspecified filename since it is locked

    Please help me.

    Thanks in advance,

    Frank

    DB:3.13:Problems With Esxi 4.1 And Snapshopts From Backup m1


    Hi,

    i have solved that issue.

    When the snapshot will stay in the Manager and you cannot commit it to the vmdk you have to restart the management services.

    Sometimes a prozess is still locking the file.

    You can restart the service on the console or via ssl.

    Via SSL you can run "/sbin/services.sh restart" to restart the services.

    After you have done this you are able to delete all snapshots and commit them into your vmdk File

    On ESX Server i usesd this command via ssh

    "service mgmt-vmware restart" to restart the managemet services.

    Sometimes you also have to restart the vCenter Agent with the following command via ssh
    "service vmware-vpxa restart"

    Best regard,

    Frank

  • RELEVANCY SCORE 3.12

    DB:3.12:I Can Access Hsqldb(Ooo Base) By Jdbc, But Unable To Update It, Help!!! 3j


    here is a code to access HSQLDB (or OOo Base)

    but unfortunately it can read the data only (and when i execute an update it fails to store them in next running...

    here connection code...

    public static void createConnection(){
    File defaultDataLocation = new File(getDatabasePath()+"/RamanInfo");
    defaultDataLocation.mkdir();
    defaultDataLocation = new File(getDatabasePath()+"/logs");
    defaultDataLocation.mkdir();
    try {
    Class.forName("org.hsqldb.jdbcDriver");
    }catch(Exception ex) {
    WriteToLog.writeToLog(ex.toString());
    }

    ZipFile file = null; //For handling zip files
    ZipEntry ent = null;
    Enumeration en = null; //For the entries in the zip file
    BufferedOutputStream out = null; //For the output from the zip class
    InputStream in = null; //for reading buffers from the zip file

    int len; //General length counter for loops
    //Unzip zip file, via info from
    //http://www.devx.com/getHelpOn/10MinuteSolution/20447

    try{
    File db=new File(ConnectionManagement.getDatabasePath()+"/RamanInfo");
    if(!db.exists()){

    WriteToLog.writeToLog("Create a Database");
    //Open the zip file that holds the OO.Org Base file

    file = new ZipFile(ConnectionManagement.getDatabasePath()+"/RamanInfo.odb");

    //Get file entries from the zipfile and loop through all of them
    en = file.entries();

    while (en.hasMoreElements()) {
    //Get the current element
    ent = (ZipEntry)en.nextElement();
    //If the file is in the database directory, extract it to our
    //temp folder using the temp filename above as a prefix
    if (ent.getName().startsWith("database/")) {
    byte[] buffer = new byte[1024];
    //Create an input stream file the file entry
    in = file.getInputStream(ent);

    //Create a output stream to write out the entry to, using the
    //temp filename created above

    out = new BufferedOutputStream(new FileOutputStream(ConnectionManagement.getDatabasePath()+"/RamanInfo/" + dbName + "." + ent.getName().substring(9)));

    //Read the input file into the buffer, then write out to
    //the output file
    while((len = in.read(buffer)) = 0){
    out.write(buffer, 0, len);
    }
    //close both the input stream and the output stream
    out.close();
    in.close();
    }
    }

    //Close the zip file since the temp files have been created
    file.close();
    }

    //Create our JDBC connection based on the temp filename used above

    try {
    ConnectionManagement.con = DriverManager.getConnection("jdbc:hsqldb:file:"+ConnectionManagement.getDatabasePath()+"/RamanInfo/" + dbName, "SA", "");
    ConnectionManagement.stmt=ConnectionManagement.con.createStatement();
    }catch (SQLException sqlex) {
    WriteToLog.writeToLog(sqlex.toString());
    }
    }catch(IOException ioex){
    WriteToLog.writeToLog(ioex.toString());
    }

    }and here an update code

    public static int execQuery(String query){
    try{
    int result=ConnectionManagement.stmt.executeUpdate(query); // execute a query
    return result;
    }catch(SQLException sqlex){// an error is occured
    WriteToLog.writeToLog(sqlex.toString());
    return 0; //no updates occred
    }
    }calling method is as follows:

    execQuery("INSERT INTO \"branches\"(\"branch\") VALUES('Slemany')";it stores the data until exiting a program, when i exit a program

    all stored data will be loss...

    can any one help me to be able to store to the database????

    DB:3.12:I Can Access Hsqldb(Ooo Base) By Jdbc, But Unable To Update It, Help!!! 3j

    That sounds suspect.

    See the following and search for "shutdown" in it.

    http://hsqldb.org/doc/guide/ch01.html

    It notes that there is a shutdown process buts suggests that this allows it to recover at next start up.

    Since you were not seeing it recover (presumably) at next start up it suggests that you are doing something else wrong on start up.

  • RELEVANCY SCORE 3.10

    DB:3.10:Unable To Install Vcredist_X86.Exe. It Generates An Unspecified Error. z8


    I am trying to install this to get access to a missing DLL. Our external software developer stated that this was the file I needed to install. I downloaded it into a directory on my PC and then double clicked to open. I immediately get the following.
    Suggestions?

    DB:3.10:Unable To Install Vcredist_X86.Exe. It Generates An Unspecified Error. z8

    Have you tried installing this one from Microsoft:
    http://www.microsoft.com/en-us/download/details.aspx?id=5555
    Normally any updates for this are provided by Windows Update.
    Do you have your system to automaticly get updates from MS?
    Plus, if your version of Windows is 64bit, you should install the 64bit version:
    http://www.microsoft.com/en-us/download/details.aspx?id=14632

  • RELEVANCY SCORE 3.07

    DB:3.07:Locked Files Not Locked By Any Process Or Host - Cannot Remove Snapshots a7



    Long story short...

    VDR had a problem with a VM. The VDR logs intitially reported the following message:

    Trouble reading files, error -3948 ( vcb api exception )

    Without us realising until today VDR had been taking snapshots of the VM and never removing them so now we have a bunch of delta files for the VM and when trying to remove the shapshots we get:

    Unable to access file unspecified filename since it is locked

    Besides the basic stuff like taking and removing a manual snapshot (which did not work) I followed KB article 10051 which identified all the locked files but the owner is 00000000-00000000-0000-000000000000 but lsof produces no output on any ESX host.

    So how do I unlock a file that is not locked by any process or ESX host and was most likely the result of a VDR mess up?

    The output from the vmksfstools -D command on each lock file can be found in the attachment. I notice the "RO Owner" has what appears to be an owner?

    Thanks

    DB:3.07:Locked Files Not Locked By Any Process Or Host - Cannot Remove Snapshots a7


    Cloning the virtual disk is certainly an option. Anyway, how many hosts do you have? I would first try to start the management agents on all hosts, to see whether a process on another host is holding the lock (e.g. still locking a file after vMotion!?).

    Andr

  • RELEVANCY SCORE 3.03

    DB:3.03:Migrating Dts To Ssis az


    Hi ,
     
    Getting error even remove Text (Source) task in DTS.
    Pl. help me .
    Thanks,
    Raja
     
    Error:
     
    LogID=23#Time=11:32 AM#Level=DTSMW_LOGLEVEL_ERR#Source=Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework#Message=Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: Failed to save package file C:\PONE_SSIS_PACKAGES\PONE_SSIS_SELLTHRU\PONE_DTS_SELLTHRU_TEST.dtsx with error 0x80004005 Unspecified error. --- System.Runtime.InteropServices.COMException (0xC001100E): Failed to save package file C:\PONE_SSIS_PACKAGES\PONE_SSIS_SELLTHRU\PONE_DTS_SELLTHRU_TEST.dtsx with error 0x80004005 Unspecified error.
       at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.SaveToXML(String FileName, IDTSPersist90 pPersistObj, IDTSEvents90 pEvents)   at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)   --- End of inner exception stack trace ---   at Microsoft.SqlServer.Dts.Runtime.Application.SaveToXml(String fileName, Package package, IDTSEvents events)   at Microsoft.SqlServer.Dts.MigrationWizard.DTS9HelperUtility.DTS9Helper.SaveToXML(Package pkg, String sFileLocation)   at Microsoft.SqlServer.Dts.MigrationWizard.Framework.Framework.StartMigration(PackageInfo pInfo)

    DB:3.03:Migrating Dts To Ssis az

    Hi Raja,
    Greetings!Thank you for your response. Since we have many packages and some of them are big we couldn't copy and paste it.
    Instead we created new SSIS package and then added the problem packages as DTS 2000 tasks.
     
    Regards,
    Rahim.

  • RELEVANCY SCORE 3.03

    DB:3.03:Unable To Send Office File While Outlook 2013 Open xm


    I am unable to send any office file by using the File/share/email/send as attachment option. I receive "Word couldn't send mail because of MAPI failure;"Unspecified error".

    DB:3.03:Unable To Send Office File While Outlook 2013 Open xm

    Thanks Deepak - once you pointed out that the problem was related to Outlook 2010, I uninstalled it completely and now Outlook 2013 works perfectly! Obviously MS Office doesn't like having two versions installed.
    Malc

  • RELEVANCY SCORE 2.99

    DB:2.99:Unable To Access Pix515e Via Asdm 11



    Hi all,

               I have a basic config on the device, the ASDM was working fine untill i modify a NAT rule. Since then I am unable to access the device with asdm 61551, I have tried to upgrade to asdm 603, but get other issue with it as per below

    SNAFLAB01(config)# copy  tftp: flash:

    Address or name of remote host [192.168.23.27]?

    Source filename [asdm-603.bin]?

    Destination filename [asdm-603.bin]?

    Accessing tftp://192.168.23.27/asdm-603.bin...WARNING: TFTP download incomplete!

    %Error reading tftp://192.168.23.27/asdm-603.bin (Unspecified Error)SNAFLAB01(config)#

    PIX is can ping TFTP SERVER,and TFTP server can ping pix back.

    There is the basic PIX config

    : Saved:PIX Version 8.0(4)!hostname SNAFLAB01enable password F.MMy3dfjSesZjVs encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Ethernet0 nameif outside security-level 0 ip address dhcp!interface Ethernet1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.23.2 255.255.255.0!interface Ethernet2 nameif DMZ24 security-level 80 ip address 192.168.24.1 255.255.255.0!interface Ethernet3 shutdown no nameif no security-level no ip address!interface Ethernet4 shutdown no nameif no security-level no ip address!interface Ethernet5 shutdown no nameif no security-level no ip address!boot system flash:/image.binftp mode passivesame-security-traffic permit intra-interfaceaccess-list inside_access_in extended permit icmp 192.168.23.0 255.255.255.0 192.168.24.0 255.255.255.0access-list inside_access_in extended permit ip 192.168.23.0 255.255.255.0 192.168.24.0 255.255.255.0access-list inside_access_in extended permit ip 192.168.23.0 255.255.255.0 anyaccess-list outside_access_in extended permit ip 172.16.0.0 255.255.0.0 192.168.23.0 255.255.255.0access-list outside_access_in extended permit icmp 192.168.24.0 255.255.255.0 192.168.24.0 255.255.255.0access-list DMZ24_access_in extended permit icmp 192.168.24.0 255.255.255.0 192.168.23.0 255.255.255.0pager lines 24logging enablelogging buffered debugginglogging asdm informationalmtu outside 1500mtu inside 1500mtu DMZ24 1500no failovericmp unreachable rate-limit 1 burst-size 1icmp permit 172.16.0.0 255.255.0.0 outsideicmp permit any insideicmp permit 192.168.23.0 255.255.255.0 insideasdm image flash:/asdm-603.binno asdm history enablearp timeout 14400global (outside) 101 interfacenat (inside) 101 0.0.0.0 0.0.0.0static (outside,inside) interface 74.210.56.28 netmask 255.255.255.255static (DMZ24,inside) 192.168.24.0 192.168.23.0 netmask 255.255.255.0static (inside,DMZ24) 192.168.23.0 192.168.23.0 netmask 255.255.255.0access-group outside_access_in in interface outsideaccess-group inside_access_in in interface insideaccess-group DMZ24_access_in in interface DMZ24route outside 0.0.0.0 0.0.0.0 74.210.56.1 1timeout xlate 3:00:00timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolutedynamic-access-policy-record DfltAccessPolicyhttp server enablehttp 192.168.23.0 255.255.255.0 insideno snmp-server locationno snmp-server contactsnmp-server enable traps snmp authentication linkup linkdown coldstartcrypto ipsec security-association lifetime seconds 28800crypto ipsec security-association lifetime kilobytes 4608000telnet 192.168.23.5 255.255.255.255 insidetelnet 192.168.23.0 255.255.255.0 insidetelnet timeout 5ssh 192.168.23.5 255.255.255.255 insidessh 192.168.23.0 255.255.255.0 insidessh timeout 5console timeout 0threat-detection basic-threatthreat-detection statistics access-listno threat-detection statistics tcp-interceptusername crazydonjuan password oRCgyJTjAIKhgirc encrypted!class-map global-class match default-inspection-traffic!!policy-map global-policy class global-class  inspect ctiqbe  inspect icmp  inspect icmp error!service-policy global-policy globalprompt hostname contextCryptochecksum:cd485f4ab354b64952e933755e1b793f: endSNAFLAB01(config)#

    SNAFLAB01(config)# sh asp table socket

    Protocol  Socket    Local Address               Foreign Address         StateSSL       000050dc  192.168.23.2:443            0.0.0.0:*               LISTENTCP       0000b694  192.168.23.2:23             0.0.0.0:*               LISTENTCP       00015c34  192.168.23.2:22             0.0.0.0:*               LISTENSNAFLAB01(config)#

    Directory of flash:/

    7      -rw-  7495736     00:48:09 Nov 09 2010  image.bin11     -rw-  7605252     01:07:50 Nov 09 2010  asdm-61551.bin

    Thanks,

    Jean Paul

    DB:2.99:Unable To Access Pix515e Via Asdm 11


    You might want to remove the following static NAT statement as it will cause you a lot of issues:

    static (outside,inside) interface 74.210.56.28 netmask 255.255.255.255

    Then "clear xlate" after removing the above. You should have access to ASDM again.

    This is not a supported configuration NATing the inside interface 1:1 to a public ip address.

  • RELEVANCY SCORE 2.96

    DB:2.96:Enable To Access A File Since It Is Locked 37


    I cannot boot up a vm and says "unable to accessa file since it is locked"

    any ideas?

    DB:2.96:Enable To Access A File Since It Is Locked 37

    Luckily, a reboot of all the cluster nodes did the job (God bless vmotion).

    Davide DG - VCP 3.5

  • RELEVANCY SCORE 2.94

    DB:2.94:Printbrm Error: 0x80004005 Unspecified Error kk


    Hi
    Im trying to restore my Windows 2003R2 x86 Printbrm backup on my Windows 2008R2 X64 Print Server. Ive installed the HP Universal Driver on the Windows 2008 Server (both x64 and x86)
    I used the following command from the target Windows 2008 server
    Printbrm -R -F c:\admin\test.printerExport -C c:\Admin\BrmConfig.xml
    Operation mode: restore
    Target server: local machine
    Target file path: c:\admin\test.printerExport.
    Config File: c:\Admin\BrmConfig.xml
    Queue publish mode: none
    Overwrite mode: keep existing settings
    Queue ACL mode: restore ACLs from backup
    LISTING PRINT QUEUES
    AUNSW0337012
    AUNSW0337011
    AUNSW0337010
    AUNSW0337009
    AUNSW0337007
    AUNSW0337006
    AUNSW0337005
    AUNSW0337004
    AUNSW0337003
    AUNSW0337002
    AUNSW0337001
    AUNSW0337000
    AUNSW0287021
    AUNSW0287020
    AUNSW0287019
    AUNSW0287018
    AUNSW0287016
    AUNSW0287015
    AUNSW0287014
    AUNSW0287013
    AUNSW0287012
    AUNSW0287011
    AUNSW0287010
    AUNSW0287009
    AUNSW0287008
    AUNSW0287007
    AUNSW0287006
    AUNSW0287005
    AUNSW0287004
    AUNSW0287002
    AUNSW0287001
    AUNSW0287000
    AUNSW0277022
    AUNSW0277020
    AUNSW0277017
    AUNSW0277016
    AUNSW0277014
    AUNSW0277013
    AUNSW0277012
    AUNSW0277011
    AUNSW0277009
    AUNSW0277008
    AUNSW0277007
    AUNSW0277006
    AUNSW0277004
    AUNSW0277003
    AUNSW0277002
    AUNSW0277000
    AUNSW0267015
    AUNSW0267014
    AUNSW0267013
    AUNSW0267011
    AUNSW0267010
    AUNSW0267008
    AUNSW0267007
    AUNSW0267006
    AUNSW0267005
    AUNSW0267004
    AUNSW0267003
    AUNSW0267002
    AUNSW0267001
    AUNSW0267000
    AUNSW0217024
    AUNSW0217023
    AUNSW0217022
    AUNSW0217021
    AUNSW0217020
    AUNSW0217019
    AUNSW0217017
    AUNSW0217015
    AUNSW0217014
    AUNSW0217008
    AUNSW0217007
    AUNSW0217006
    AUNSW0217005
    AUNSW0217004
    AUNSW0217003
    AUNSW0217000
    AUNSW0187015
    AUNSW0187013
    AUNSW0187012
    AUNSW0187011
    AUNSW0187010
    AUNSW0187009
    AUNSW0187008
    AUNSW0187007
    AUNSW0187006
    AUNSW0187004
    AUNSW0187002
    AUNSW0177015
    AUNSW0177014
    AUNSW0177013
    AUNSW0177012
    AUNSW0177010
    AUNSW0177009
    AUNSW0177006
    AUNSW0177005
    AUNSW0177004
    AUNSW0177003
    AUNSW0177002
    AUNSW0177001
    AUNSW0167023
    AUNSW0167022
    AUNSW0167021
    AUNSW0167019
    AUNSW0167018
    AUNSW0167017
    AUNSW0167013
    AUNSW0167012
    AUNSW0167011
    AUNSW0167010
    AUNSW0167009
    AUNSW0167008
    AUNSW0167007
    AUNSW0167006
    AUNSW0167004
    AUNSW0167003
    AUNSW0167002
    AUNSW0167000
    AUNSW0157017
    AUNSW0157016
    AUNSW0157015
    AUNSW0157014
    AUNSW0157013
    AUNSW0157012
    AUNSW0157011
    AUNSW0157010
    AUNSW0157009
    AUNSW0157008
    AUNSW0157007
    AUNSW0157004
    AUNSW0157003
    AUNSW0157001
    AUNSW0057019
    AUNSW0057015
    AUNSW0057011
    AUNSW0057009
    AUNSW0057008
    AUNSW0057007
    AUNSW0057004
    AUNSW0057003
    LISTING PRINTER DRIVERS
    HP Universal Printing PCL 5 (v5.2), Windows NT x86, None
    HP LaserJet P3010 Series PCL 6, Windows NT x86, None
    HP LaserJet P3005 PCL 5e, Windows NT x86, None
    HP LaserJet P2015 Series PCL 5e, Windows NT x86, None
    HP LaserJet M9050 MFP PCL 6, Windows NT x86, None
    HP LaserJet M9050 MFP PCL 5e, Windows NT x86, None
    HP LaserJet M3035 MFP PCL 5, Windows NT x86, None
    HP LaserJet 9000 MFP PCL 5e, Windows NT x86, None
    HP LaserJet 8000 Series PCL, Windows NT x86, None
    HP LaserJet 5M, Windows NT x86, None
    HP LaserJet 4350 PCL 5e, Windows NT x86, None
    HP LaserJet 4300 PCL 5e, Windows NT x86, None
    HP LaserJet 4200 PCL 5e, Windows NT x86, None
    HP LaserJet 4100 Series PCL, Windows NT x86, None
    HP LaserJet 4050 Series PCL, Windows NT x86, None
    HP LaserJet 4000 Series PCL, Windows NT x86, None
    HP LaserJet 3390 Series PCL 5e, Windows NT x86, None
    HP LaserJet 2200 Series PCL, Windows NT x86, None
    HP LaserJet 2100 PCL6, Windows NT x86, None
    hp LaserJet 1320 PCL 5e, Windows NT x86, None
    HP Color LaserJet CP3525 PCL 6, Windows NT x86, None
    HP Color LaserJet CP3505 PCL 5c, Windows NT x86, None
    HP Color LaserJet CM6040 MFP PCL 6, Windows NT x86, None
    HP Color LaserJet 5550 PCL 5c, Windows NT x86, None
    HP Color LaserJet 4730mfp PCL 5c, Windows NT x86, None
    HP Color LaserJet 3800 PCL 5c, Windows NT x86, None
    HP Color LaserJet 3700 PCL 6, Windows NT x86, None
    HP Color LaserJet 3700 PCL 5c, Windows NT x86, None
    HP Color LaserJet 2605dn_2605dtn PCL 6, Windows NT x86, None
    LISTING PRINTER PORTS
    136.1.86.115, TCP
    AUNSW0167022, TCP
    PORT_AUNSW0057003, TCP
    PORT_AUNSW0057004, TCP
    PORT_AUNSW0057007, TCP
    PORT_AUNSW0057008, TCP
    PORT_AUNSW0057009, TCP
    PORT_AUNSW0057011, TCP
    PORT_AUNSW0057013, TCP
    PORT_AUNSW0057015, TCP
    PORT_AUNSW0057019, TCP
    PORT_AUNSW0157001, TCP
    PORT_AUNSW0157003, TCP
    PORT_AUNSW0157004, TCP
    PORT_AUNSW0157007, TCP
    PORT_AUNSW0157008, TCP
    PORT_AUNSW0157009, TCP
    PORT_AUNSW0157010, TCP
    PORT_AUNSW0157011, TCP
    PORT_AUNSW0157012, TCP
    PORT_AUNSW0157013, TCP
    PORT_AUNSW0157014, TCP
    PORT_AUNSW0157015, TCP
    PORT_AUNSW0157016, TCP
    PORT_AUNSW0157017, TCP
    PORT_AUNSW0167000, TCP
    PORT_AUNSW0167002, TCP
    PORT_AUNSW0167003, TCP
    PORT_AUNSW0167004, TCP
    PORT_AUNSW0167006, TCP
    PORT_AUNSW0167007, TCP
    PORT_AUNSW0167008, TCP
    PORT_AUNSW0167009, TCP
    PORT_AUNSW0167010, TCP
    PORT_AUNSW0167011, TCP
    PORT_AUNSW0167012, TCP
    PORT_AUNSW0167013, TCP
    PORT_AUNSW0167017, TCP
    PORT_AUNSW0167018, TCP
    PORT_AUNSW0167019, TCP
    PORT_AUNSW0167021, TCP
    PORT_AUNSW0167023, TCP
    PORT_AUNSW0177001, TCP
    PORT_AUNSW0177002, TCP
    PORT_AUNSW0177003, TCP
    PORT_AUNSW0177004, TCP
    PORT_AUNSW0177005, TCP
    PORT_AUNSW0177006, TCP
    PORT_AUNSW0177009, TCP
    PORT_AUNSW0177010, TCP
    PORT_AUNSW0177012, TCP
    PORT_AUNSW0177013, TCP
    PORT_AUNSW0177014, TCP
    PORT_AUNSW0177015, TCP
    PORT_AUNSW0177016, TCP
    PORT_AUNSW0187002, TCP
    PORT_AUNSW0187004, TCP
    PORT_AUNSW0187006, TCP
    PORT_AUNSW0187007, TCP
    PORT_AUNSW0187008, TCP
    PORT_AUNSW0187009, TCP
    PORT_AUNSW0187010, TCP
    PORT_AUNSW0187011, TCP
    PORT_AUNSW0187012, TCP
    PORT_AUNSW0187013, TCP
    PORT_AUNSW0187015, TCP
    PORT_AUNSW0217000, TCP
    PORT_AUNSW0217003, TCP
    PORT_AUNSW0217004, TCP
    PORT_AUNSW0217005, TCP
    PORT_AUNSW0217006, TCP
    PORT_AUNSW0217007, TCP
    PORT_AUNSW0217008, TCP
    PORT_AUNSW0217014, TCP
    PORT_AUNSW0217015, TCP
    PORT_AUNSW0217017, TCP
    PORT_AUNSW0217019, TCP
    PORT_AUNSW0217020, TCP
    PORT_AUNSW0217021, TCP
    PORT_AUNSW0217022, TCP
    PORT_AUNSW0217023, TCP
    PORT_AUNSW0217024, TCP
    PORT_AUNSW0267000, TCP
    PORT_AUNSW0267001, TCP
    PORT_AUNSW0267002, TCP
    PORT_AUNSW0267003, TCP
    PORT_AUNSW0267004, TCP
    PORT_AUNSW0267005, TCP
    PORT_AUNSW0267006, TCP
    PORT_AUNSW0267007, TCP
    PORT_AUNSW0267008, TCP
    PORT_AUNSW0267010, TCP
    PORT_AUNSW0267011, TCP
    PORT_AUNSW0267013, TCP
    PORT_AUNSW0267014, TCP
    PORT_AUNSW0267015, TCP
    PORT_AUNSW0267017, TCP
    PORT_AUNSW0277000, TCP
    PORT_AUNSW0277001, TCP
    PORT_AUNSW0277002, TCP
    PORT_AUNSW0277003, TCP
    PORT_AUNSW0277004, TCP
    PORT_AUNSW0277006, TCP
    PORT_AUNSW0277007, TCP
    PORT_AUNSW0277008, TCP
    PORT_AUNSW0277009, TCP
    PORT_AUNSW0277011, TCP
    PORT_AUNSW0277012, TCP
    PORT_AUNSW0277013, TCP
    PORT_AUNSW0277014, TCP
    PORT_AUNSW0277016, TCP
    PORT_AUNSW0277017, TCP
    PORT_AUNSW0277020, TCP
    PORT_AUNSW0277022, TCP
    PORT_AUNSW0287001, TCP
    PORT_AUNSW0287002, TCP
    PORT_AUNSW0287004, TCP
    PORT_AUNSW0287005, TCP
    PORT_AUNSW0287006, TCP
    PORT_AUNSW0287007, TCP
    PORT_AUNSW0287008, TCP
    PORT_AUNSW0287009, TCP
    PORT_AUNSW0287010, TCP
    PORT_AUNSW0287011, TCP
    PORT_AUNSW0287012, TCP
    PORT_AUNSW0287013, TCP
    PORT_AUNSW0287014, TCP
    PORT_AUNSW0287015, TCP
    PORT_AUNSW0287016, TCP
    PORT_AUNSW0287018, TCP
    PORT_AUNSW0287019, TCP
    PORT_AUNSW0287020, TCP
    PORT_AUNSW0287021, TCP
    PORT_AUNSW0337000, TCP
    PORT_AUNSW0337001, TCP
    PORT_AUNSW0337002, TCP
    PORT_AUNSW0337003, TCP
    PORT_AUNSW0337004, TCP
    PORT_AUNSW0337005, TCP
    PORT_AUNSW0337006, TCP
    PORT_AUNSW0337007, TCP
    PORT_AUNSW0337009, TCP
    PORT_AUNSW0337010, TCP
    PORT_AUNSW0337011, TCP
    PORT_AUNSW0337012, TCP
    LISTING PRINT PROCESSORS
    HPZPP4wm Windows NT x86 hpzpp4wm.DLL
    HPCPP6de Windows NT x86 hpcpp6de.DLL
    HPCPP5r1 Windows NT x86 hpcpp5r1.DLL
    hpcpp112 Windows NT x86 hpcpp112.dll
    hpcpp083 Windows NT x86 hpcpp083.DLL
    MS_XPS Windows x64 filterpipelineprintproc.dll

    The following objects failed to install:

    LISTING PRINT QUEUES
    AUNSW0337012Error: 0x80004005
    Unspecified error
    AUNSW0337011Error: 0x80004005
    Unspecified error
    AUNSW0337010Error: 0x80004005
    Unspecified error
    AUNSW0337009Error: 0x80004005
    Unspecified error
    AUNSW0337007Error: 0x80004005
    Unspecified error
    AUNSW0337006Error: 0x80004005
    Unspecified error
    AUNSW0337005Error: 0x80004005
    Unspecified error
    AUNSW0337004Error: 0x80004005
    Unspecified error
    AUNSW0337003Error: 0x80004005
    Unspecified error
    AUNSW0337002Error: 0x80004005
    Unspecified error
    AUNSW0337001Error: 0x80004005
    Unspecified error
    AUNSW0337000Error: 0x80004005
    Unspecified error
    AUNSW0287021Error: 0x80004005
    Unspecified error
    AUNSW0287020Error: 0x80004005
    Unspecified error
    AUNSW0287019Error: 0x80004005
    Unspecified error
    AUNSW0287018Error: 0x80004005
    Unspecified error
    AUNSW0287016Error: 0x80004005
    Unspecified error
    AUNSW0287015Error: 0x80004005
    Unspecified error
    AUNSW0287014Error: 0x80004005
    Unspecified error
    AUNSW0287013Error: 0x80004005
    Unspecified error
    AUNSW0287012Error: 0x80004005
    Unspecified error
    AUNSW0287011Error: 0x80004005
    Unspecified error
    AUNSW0287010Error: 0x80004005
    Unspecified error
    AUNSW0287009Error: 0x80004005
    Unspecified error
    AUNSW0287008Error: 0x80004005
    Unspecified error
    AUNSW0287007Error: 0x80004005
    Unspecified error
    AUNSW0287006Error: 0x80004005
    Unspecified error
    AUNSW0287005Error: 0x80004005
    Unspecified error
    AUNSW0287004Error: 0x80004005
    Unspecified error
    AUNSW0287002Error: 0x80004005
    Unspecified error
    AUNSW0287001Error: 0x80004005
    Unspecified error
    AUNSW0287000Error: 0x80004005
    Unspecified error
    AUNSW0277022Error: 0x80004005
    Unspecified error
    AUNSW0277020Error: 0x80004005
    Unspecified error
    AUNSW0277017Error: 0x80004005
    Unspecified error
    AUNSW0277016Error: 0x80004005
    Unspecified error
    AUNSW0277014Error: 0x80004005
    Unspecified error
    AUNSW0277013Error: 0x80004005
    Unspecified error
    AUNSW0277012Error: 0x80004005
    Unspecified error
    AUNSW0277011Error: 0x80004005
    Unspecified error
    AUNSW0277009Error: 0x80004005
    Unspecified error
    AUNSW0277008Error: 0x80004005
    Unspecified error
    AUNSW0277007Error: 0x80004005
    Unspecified error
    AUNSW0277006Error: 0x80004005
    Unspecified error
    AUNSW0277004Error: 0x80004005
    Unspecified error
    AUNSW0277003Error: 0x80004005
    Unspecified error
    AUNSW0277002Error: 0x80004005
    Unspecified error
    AUNSW0277000Error: 0x80004005
    Unspecified error
    AUNSW0267015Error: 0x80004005
    Unspecified error
    AUNSW0267014Error: 0x80004005
    Unspecified error
    AUNSW0267013Error: 0x80004005
    Unspecified error
    AUNSW0267011Error: 0x80004005
    Unspecified error
    AUNSW0267010Error: 0x80004005
    Unspecified error
    AUNSW0267008Error: 0x80004005
    Unspecified error
    AUNSW0267007Error: 0x80004005
    Unspecified error
    AUNSW0267006Error: 0x80004005
    Unspecified error
    AUNSW0267005Error: 0x80004005
    Unspecified error
    AUNSW0267004Error: 0x80004005
    Unspecified error
    AUNSW0267003Error: 0x80004005
    Unspecified error
    AUNSW0267002Error: 0x80004005
    Unspecified error
    AUNSW0267001Error: 0x80004005
    Unspecified error
    AUNSW0267000Error: 0x80004005
    Unspecified error
    AUNSW0217024Error: 0x80004005
    Unspecified error
    AUNSW0217023Error: 0x80004005
    Unspecified error
    AUNSW0217022Error: 0x80004005
    Unspecified error
    AUNSW0217021Error: 0x80004005
    Unspecified error
    AUNSW0217020Error: 0x80004005
    Unspecified error
    AUNSW0217019Error: 0x80004005
    Unspecified error
    AUNSW0217017Error: 0x80004005
    Unspecified error
    AUNSW0217015Error: 0x80004005
    Unspecified error
    AUNSW0217014Error: 0x80004005
    Unspecified error
    AUNSW0217008Error: 0x80004005
    Unspecified error
    AUNSW0217007Error: 0x80004005
    Unspecified error
    AUNSW0217006Error: 0x80004005
    Unspecified error
    AUNSW0217005Error: 0x80004005
    Unspecified error
    AUNSW0217004Error: 0x80004005
    Unspecified error
    AUNSW0217003Error: 0x80004005
    Unspecified error
    AUNSW0217000Error: 0x80004005
    Unspecified error
    AUNSW0187015Error: 0x80004005
    Unspecified error
    AUNSW0187013Error: 0x80004005
    Unspecified error
    AUNSW0187012Error: 0x80004005
    Unspecified error
    AUNSW0187011Error: 0x80004005
    Unspecified error
    AUNSW0187010Error: 0x80004005
    Unspecified error
    AUNSW0187009Error: 0x80004005
    Unspecified error
    AUNSW0187008Error: 0x80004005
    Unspecified error
    AUNSW0187007Error: 0x80004005
    Unspecified error
    AUNSW0187006Error: 0x80004005
    Unspecified error
    AUNSW0187004Error: 0x80004005
    Unspecified error
    AUNSW0187002Error: 0x80004005
    Unspecified error
    AUNSW0177015Error: 0x80004005
    Unspecified error
    AUNSW0177014Error: 0x80004005
    Unspecified error
    AUNSW0177013Error: 0x80004005
    Unspecified error
    AUNSW0177012Error: 0x80004005
    Unspecified error
    AUNSW0177010Error: 0x80004005
    Unspecified error
    AUNSW0177009Error: 0x80004005
    Unspecified error
    AUNSW0177006Error: 0x80004005
    Unspecified error
    AUNSW0177005Error: 0x80004005
    Unspecified error
    AUNSW0177004Error: 0x80004005
    Unspecified error
    AUNSW0177003Error: 0x80004005
    Unspecified error
    AUNSW0177002Error: 0x80004005
    Unspecified error
    AUNSW0177001Error: 0x80004005
    Unspecified error
    AUNSW0167023Error: 0x80004005
    Unspecified error
    AUNSW0167022Error: 0x80004005
    Unspecified error
    AUNSW0167021Error: 0x80004005
    Unspecified error
    AUNSW0167019Error: 0x80004005
    Unspecified error
    AUNSW0167018Error: 0x80004005
    Unspecified error
    AUNSW0167017Error: 0x80004005
    Unspecified error
    AUNSW0167013Error: 0x80004005
    Unspecified error
    AUNSW0167012Error: 0x80004005
    Unspecified error
    AUNSW0167011Error: 0x80004005
    Unspecified error
    AUNSW0167010Error: 0x80004005
    Unspecified error
    AUNSW0167009Error: 0x80004005
    Unspecified error
    AUNSW0167008Error: 0x80004005
    Unspecified error
    AUNSW0167007Error: 0x80004005
    Unspecified error
    AUNSW0167006Error: 0x80004005
    Unspecified error
    AUNSW0167004Error: 0x80004005
    Unspecified error
    AUNSW0167003Error: 0x80004005
    Unspecified error
    AUNSW0167002Error: 0x80004005
    Unspecified error
    AUNSW0167000Error: 0x80004005
    Unspecified error
    AUNSW0157017Error: 0x80004005
    Unspecified error
    AUNSW0157016Error: 0x80004005
    Unspecified error
    AUNSW0157015Error: 0x80004005
    Unspecified error
    AUNSW0157014Error: 0x80004005
    Unspecified error
    AUNSW0157013Error: 0x80004005
    Unspecified error
    AUNSW0157012Error: 0x80004005
    Unspecified error
    AUNSW0157011Error: 0x80004005
    Unspecified error
    AUNSW0157010Error: 0x80004005
    Unspecified error
    AUNSW0157009Error: 0x80004005
    Unspecified error
    AUNSW0157008Error: 0x80004005
    Unspecified error
    AUNSW0157007Error: 0x80004005
    Unspecified error
    AUNSW0157004Error: 0x80004005
    Unspecified error
    AUNSW0157003Error: 0x80004005
    Unspecified error
    AUNSW0157001Error: 0x80004005
    Unspecified error
    AUNSW0057019Error: 0x80004005
    Unspecified error
    AUNSW0057015Error: 0x80004005
    Unspecified error
    AUNSW0057011Error: 0x80004005
    Unspecified error
    AUNSW0057009Error: 0x80004005
    Unspecified error
    AUNSW0057008Error: 0x80004005
    Unspecified error
    AUNSW0057007Error: 0x80004005
    Unspecified error
    AUNSW0057004Error: 0x80004005
    Unspecified error
    AUNSW0057003Error: 0x80004005
    Unspecified error
    LISTING PRINTER DRIVERS
    HP Universal Printing PCL 5 (v5.2), Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet P3010 Series PCL 6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet P3005 PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet P2015 Series PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet M9050 MFP PCL 6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet M9050 MFP PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet M3035 MFP PCL 5, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 9000 MFP PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 8000 Series PCL, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 5M, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 4350 PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 4300 PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 4200 PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 4100 Series PCL, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 4050 Series PCL, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 4000 Series PCL, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 3390 Series PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 2200 Series PCL, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP LaserJet 2100 PCL6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    hp LaserJet 1320 PCL 5e, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet CP3525 PCL 6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet CP3505 PCL 5c, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet CM6040 MFP PCL 6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet 5550 PCL 5c, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet 4730mfp PCL 5c, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet 3800 PCL 5c, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet 3700 PCL 6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet 3700 PCL 5c, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    HP Color LaserJet 2605dn_2605dtn PCL 6, Windows NT x86, NoneError: 0x80004005
    Unspecified error
    LISTING PRINTER PORTS
    136.1.86.115, TCPError: 0x80004005
    Unspecified error
    AUNSW0167022, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0057019, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157001, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157012, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157014, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157016, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0157017, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167000, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167012, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167017, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167018, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167019, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167021, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0167023, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177001, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177005, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177012, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177014, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0177016, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187012, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0187015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217000, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217005, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217014, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217017, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217019, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217020, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217021, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217022, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217023, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0217024, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267000, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267001, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267005, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267014, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0267017, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277000, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277001, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277012, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277014, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277016, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277017, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277020, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0277022, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287001, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287005, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287008, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287012, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287013, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287014, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287015, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287016, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287018, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287019, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287020, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0287021, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337000, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337001, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337002, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337003, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337004, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337005, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337006, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337007, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337009, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337010, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337011, TCPError: 0x80004005
    Unspecified error
    PORT_AUNSW0337012, TCPError: 0x80004005
    Unspecified error
    LISTING PRINT PROCESSORS
    HPZPP4wm Windows NT x86 hpzpp4wm.DLLError: 0x80004005
    Unspecified error
    HPCPP6de Windows NT x86 hpcpp6de.DLLError: 0x80004005
    Unspecified error
    HPCPP5r1 Windows NT x86 hpcpp5r1.DLLError: 0x80004005
    Unspecified error
    hpcpp112 Windows NT x86 hpcpp112.dllError: 0x80004005
    Unspecified error
    hpcpp083 Windows NT x86 hpcpp083.DLLError: 0x80004005
    Unspecified error
    MS_XPS Windows x64 filterpipelineprintproc.dllError: 0x80004005
    Unspecified error

    Check the eventlog for detailed information about the error which occurred.

    The following error occurred: 0x80004005.
    Unspecified error
    Check the eventlog for detailed information about the error which occurred.

    DB:2.94:Printbrm Error: 0x80004005 Unspecified Error kk

    A colleague of mine found the issue with the PrintBRM command.
    The -C switch does not allow for File Paths, you have to have the configuration file present in the folder you have the command prompt running from. For example:
    C:\Windows\System32\Spool\Tools
    The configuration file needs to be savedas C:\Windows\System32\Spool\Tools\Printers.xml
    The other problems we have now are:
    Element not found. Error: 0x80070490
    The printer driver is unknown Error: 0x80070705
    The Parameter is incorrect. Error: 0x80070057
    Any idea what's causing these? I believe the driver is unknown error could be caused by a driver that is not supported by Windows server 2008 and has no corresponding driver package in the Printers.xml file. We have a list of these marked up as 'red' printers,
    so that error message isn't as important.
    I've also got to mention the HP OfficeJet Pro K550 printer driver appears to have problems with the driver not installing correctly. The driver version stored in Windows 2008 as a Native driver is version 0000600 and the driver we've found to work is 0000500
    (hexadecimal values). We've temporarily wrote a registry key editor to amend the values, but is there anyway to prove the native driver is corrupted or disfunctional with Windows Server 2008 SP2?
    CheersHP WinTel Server Support

  • RELEVANCY SCORE 2.81

    DB:2.81:Printbrm Event Id 71 88


    Hi all,
    I seem to be getting the below error while importing printers from a file in windows server 2008R2SP1.
    While restoring a print queue from backup, Printbrm.exe (the Printer Migration Wizard or the command-line tool) failed to copy print processor file C:\Users\RANDY~1.COB\AppData\Local\Temp\99B5DAD2-B483-4529-92C5-47C7594A837C\PRTPROCS\Windows x64\winprint.dll
    to C:\Windows\system32\spool\PRTPROCS\x64\winprint.dll. Error 0x5. Access is denied.
    . This can occur if Printbrm.exe cannot locate all files for a print queue, or if the Print Spooler service cannot be stopped during installation of the print processor. If printing fails, manually install the print processor on the destination computer.

    I have checked the printer export files against other servers and its working.
    I can also add printers manually.
    The error alludes to a securioty permissions error which i have check and confirmed that i have access to the both folders.
    Im running the import as a Domain Admin.
    I have also tried to add the printers in power shell. I get the following errors.
    Please excuse the lenght of the but theres quite a few printers.
    PS C:\Windows\system32\spool\tools .\PrintBrm.exe -s localhost -r -f C:\finacleprinters862011.printerExport
    Operation mode: restore
    Target server: localhost
    Target file path: C:\finacleprinters862011.printerExport.
    Queue publish mode: none
    Overwrite mode: keep existing settings
    Queue ACL mode: restore ACLs from backup

    LISTING PRINT QUEUES
    kengen03
    kengen02
    kengen01
    welcmul01
    SCSJHBSALESMUL05
    SCSJHBSALESMUL02
    rttgmul01
    rttgjhbacc01
    revspeops
    revops
    revfin
    plzmul02
    plzmul01
    PHDPRTKEN001
    PHDPRT082
    PHDPRT073
    PHDPRT061
    PHDPRT049
    PHDPRT048
    phdprt036
    phdprt015
    PHDPRT004.
    phdprt004
    phdprt001
    phdprn1000
    kimmul01
    JHBWHSMUL07
    JHBWHSMUL06
    jhbwhsmul05
    jhbwhsmul02
    jhbwhsmul01
    jhbscssalmul01
    jhbpngmul02
    jhbpngmul01
    jhbmul26
    jhbmul25
    jhbmul24
    jhbmul23
    jhbmul22
    jhbmul21
    jhbmul20
    jhbmul19
    jhbmul18
    jhbmul17
    jhbmul16
    jhbmul15
    jhbmul14
    jhbmul12
    jhbmul11
    jhbmul10
    jhbmul09
    jhbmul08
    jhbmul07
    jhbmul05
    jhbmul04
    jhbmul03
    jhbmul02
    jhbmul01
    jhblbl34
    JHBFINMUL07
    jhbfinmul06
    jhbfinmul05
    jhbfinmul04
    jhbfinmul03
    jhbfinmul02
    jhbfinmul01
    jhbdebmul02 new
    jhbdebmul02
    jhbdebmul01.
    jhbdebmul01
    jhbdcmul01
    jhbdatmul01
    HRP_PE_LAZER
    HRP_ELZ_LAZER
    HRP_DBN_COPIER
    HRP_CPT_LAZER
    HRP_CPT_IT_LAZER
    HRP_CPT_COPIER
    HRP_CPT_ADMIN1
    HRP_CPT_ADMIN
    HRP_BLM_LAZER
    HRP_ACSA_COPIER
    Fintrain02(RTT)
    Fintrain01(SOS)
    dbnmul02
    dbnmul01
    DBNADMGEN03
    cptmul02
    cptmul01
    conmul01
    blmmul01
    BLMADMMUL01
    LISTING PRINTER DRIVERS
    OKI C130n(PCL6), Windows x64, None
    Brother HL-5250DN series, Windows x64, None
    TP Output Gateway PS, Windows x64, None
    TP Output Gateway, Windows x64, None
    RICOH Aficio SP 4210N PCL 6, Windows x64, None
    RICOH Aficio SP 4110N PCL 6, Windows x64, None
    RICOH Aficio MP C3000 PCL 6, Windows x64, None
    RICOH Aficio MP C2800 PCL 6, Windows x64, None
    RICOH Aficio MP 6001 PCL 6, Windows x64, None
    Ricoh Aficio MP 3010 PCL6, Windows x64, None
    RICOH Aficio MP 3010 PCL 6, Windows x64, None
    RICOH Aficio MP 1600 PCL 6, Windows x64, None
    RICOH Aficio 2027 PCL 6, Windows x64, None
    PCL6 Driver for Universal Print, Windows x64, None
    NRG SP C811DN RPCS, Windows x64, None
    NRG SP C811DN PS, Windows x64, None
    NRG SP C811DN PCL6, Windows x64, None
    NRG MP C3000 PCL5c, Windows x64, None
    NRG MP C2000 PS, Windows x64, None
    NRG MP C2000 PCL6, Windows x64, None
    NRG MP 5000 PCL6, Windows x64, None
    NRG MP 4000 PCL6, Windows x64, None
    NRG MP 3350 PCL 6, Windows x64, None
    NRG MP 2550 PCL6, Windows x64, None
    NRG MP 161 PCL6, Windows x64, None
    NRG MP 1600 PCL6, Windows x64, None
    NRG MP 1600 PCL, Windows x64, None
    NRG DSm745 RPCS, Windows x64, None
    NRG DSm745 PCL6, Windows x64, None
    NRG DSm735 PCL6, Windows x64, None
    NRG DSm725 PCL6, Windows x64, None
    NRG DSm725 PCL 6, Windows x64, None
    NRG DSm635 RPCS, Windows x64, None
    NRG DSm635 PCL 6, Windows x64, None
    NRG DSm622 PCL 6, Windows x64, None
    NRG DSm620 PS, Windows x64, None
    NRG DSm618 RPCS, Windows x64, None
    NRG DSm618 PS, Windows x64, None
    NRG DSm615 PCL 6, Windows x64, None
    NRG DSm415 PCL6, Windows x64, None
    NRG DSc435 PCL6, Windows x64, None
    NRG DSc38 PCL5c, Windows x64, None
    NRG DSc232 PS, Windows x64, None
    NRG DSc224 PS, Windows x64, None
    NRG D415s/2815S/3215s PCL, Windows x64, None
    NRG C7416 PCL5c, Windows x64, None
    NRG 6002/6005/6008 PCL 6, Windows x64, None
    Kyocera Mita KM-1815 (KPDL), Windows x64, None
    Kyocera KM-1820, Windows x64, None
    KONICA MINOLTA Universal PS, Windows x64, None
    KONICA MINOLTA 362/282/222 VPS, Windows x64, None
    HP Universal Printing PCL 6 (v5.1), Windows x64, None
    HP Universal Printing PCL 6, Windows x64, None
    HP Officejet Pro K850 Series, Windows x64, None
    HP Officejet H470 series BT, Windows x64, None
    HP Officejet 7300 series, Windows x64, None
    HP LaserJet P4010_P4510 Series PCL 6, Windows x64, None
    HP LaserJet P3005 PCL6, Windows x64, None
    HP LaserJet 4350 PCL 6, Windows x64, None
    HP LaserJet 4200/4300 PCL6, Windows x64, None
    hp LaserJet 1320 PCL 6, Windows x64, None
    HP Deskjet D2500 series, Windows x64, None
    HP Color LaserJet CP3525 PCL6, Windows x64, None
    HP Color LaserJet CP1215, Windows x64, None
    HP Color LaserJet 9500 PCL 6, Windows x64, None
    HP Color LaserJet 3600, Windows x64, None
    HP Color LaserJet 3550, Windows x64, None
    HP Color LaserJet 1600, Windows x64, None
    Gestetner MP4500/DSm745e PS, Windows x64, None
    Gestetner MP4500/DSm745e PCL6, Windows x64, None
    Gestetner MP C3001 PCL 5c, Windows x64, None
    Gestetner MP 161/DSm416 PCL6, Windows x64, None
    Gestetner DSm415 PCL 6, Windows x64, None
    Gestetner DSc224 PCL 5c, Windows x64, None
    Gestetner C7526dn PCL5c, Windows x64, None
    Generic / Text Only, Windows x64, None
    EPSON FX Series 1 (136), Windows x64, None
    Canon iR3035/iR3045 PCL6, Windows x64, None
    Canon iR2220/iR3320 PCL6, Windows x64, None
    Canon iR2200-3300 PCL6, Windows x64, None
    Brother MFC-7440N, Windows x64, None
    Brother HL-6050D/DN series, Windows x64, None
    Brother HL-5350DN, Windows x64, None
    LISTING PRINTER PORTS
    10.99.36.30, TCP
    10.99.51.113, TCP
    BLMADMMUL01, TCP
    blmmul01, TCP
    conmul01, TCP
    cptmul01, TCP
    cptmul02, TCP
    DBNADMGEN03, TCP
    dbnmul01, TCP
    dbnmul02, TCP
    fintrain01, TCP
    H31_10.37.110.136, TCP
    heimlich, TCP
    hiemlich, TCP
    HRP_ACSA_COPIER, TCP
    HRP_BLM_LAZER, TCP
    HRP_CPT_ADMIN, TCP
    HRP_CPT_ADMIN1, TCP
    HRP_CPT_COPIER, TCP
    HRP_CPT_IT_LAZER, TCP
    HRP_CPT_LAZER, TCP
    HRP_DBN_COPIER, TCP
    HRP_ELZ_LAZER, TCP
    HRP_PE_LAZER, TCP
    IP_blmadmmul01, TCP
    jhbdatmul01, TCP
    jhbdcmul01, TCP
    jhbdebmul01, TCP
    JHBDEBMUL02, TCP
    jhbfinmul01, TCP
    jhbfinmul02, TCP
    jhbfinmul03, TCP
    jhbfinmul04, TCP
    jhbfinmul05, TCP
    jhbfinmul06, TCP
    JHBFINMUL07, TCP
    jhblbl34, TCP
    jhbmul01, TCP
    jhbmul02, TCP
    jhbmul03, TCP
    jhbmul04, TCP
    jhbmul05, TCP
    jhbmul06, TCP
    jhbmul07, TCP
    jhbmul08, TCP
    jhbmul09, TCP
    jhbmul10, TCP
    jhbmul11, TCP
    jhbmul12, TCP
    jhbmul13, TCP
    jhbmul14, TCP
    jhbmul15, TCP
    jhbmul16, TCP
    jhbmul17, TCP
    jhbmul18, TCP
    jhbmul19, TCP
    jhbmul20, TCP
    jhbmul21, TCP
    jhbmul22, TCP
    jhbmul23, TCP
    jhbmul24, TCP
    jhbmul25, TCP
    jhbmul28, TCP
    jhbpngmul01, TCP
    jhbpngmul02, TCP
    jhbscssalmul01, TCP
    jhbwhsmul01, TCP
    jhbwhsmul02, TCP
    jhbwhsmul05, TCP
    JHBWHSMUL06, TCP
    JHBWHSMUL07, TCP
    kimmul01, TCP
    phdprt001, TCP
    phdprt004, TCP
    phdprt015, TCP
    phdprt036, TCP
    PHDPRT048, TCP
    PHDPRT049, TCP
    PHDPRT061, TCP
    PHDPRT073, TCP
    PHDPRT082, TCP
    PHDPRTKEN001, TCP
    plzmul01, TCP
    plzmul02, TCP
    REVFD, TCP
    revfin, TCP
    revops, TCP
    revspeops, TCP
    rttgjhbacc01, TCP
    rttgjhbacc1, TCP
    rttgmul01, TCP
    SCSJHBSALESMUL02, TCP
    SCSJHBSALESMUL05, TCP
    welcmul01, TCP
    kengen01, TCP
    kengen02, TCP
    kengen03, TCP
    LISTING PRINT PROCESSORS
    tpwinprn Windows x64 TPWinPrn.dll
    RPCSPRN Windows x64 RC00C1B1.dll
    KOB__A_P Windows x64 KOB__A_P.DLL
    KOBZ2ABP Windows x64 KOBZ2ABP.DLL
    hpzppwn7 Windows x64 hpzppwn7.dll
    hpzppw71 Windows x64 hpzppw71.dll
    hpcPP6dn Windows x64 hpcpp6dn.DLL
    hpcpp6de Windows x64 hpcpp6de.DLL
    HPCPP5r1 Windows x64 hpcpp5r1.DLL
    hpcpp107 Windows x64 hpcpp107.dll
    E418PP64 Windows x64 E418PP64.dll
    E318PP64 Windows x64 E318PP64.dll
    BrPrint Windows x64 BRPP64A.DLL

    The following objects failed to install:

    LISTING PRINT QUEUES
    kengen03 Error: 0x80004005
    Unspecified error

    kengen02 Error: 0x80004005
    Unspecified error

    kengen01 Error: 0x80004005
    Unspecified error

    welcmul01 Error: 0x80004005
    Unspecified error

    SCSJHBSALESMUL05 Error: 0x80004005
    Unspecified error

    SCSJHBSALESMUL02 Error: 0x80004005
    Unspecified error

    rttgmul01 Error: 0x80004005
    Unspecified error

    rttgjhbacc01 Error: 0x80004005
    Unspecified error

    revspeops Error: 0x80004005
    Unspecified error

    revops Error: 0x80004005
    Unspecified error

    revfin Error: 0x80004005
    Unspecified error

    plzmul02 Error: 0x80004005
    Unspecified error

    plzmul01 Error: 0x80004005
    Unspecified error

    PHDPRTKEN001 Error: 0x80004005
    Unspecified error

    PHDPRT082 Error: 0x80004005
    Unspecified error

    PHDPRT073 Error: 0x80004005
    Unspecified error

    PHDPRT061 Error: 0x80004005
    Unspecified error

    PHDPRT049 Error: 0x80004005
    Unspecified error

    PHDPRT048 Error: 0x80004005
    Unspecified error

    phdprt036 Error: 0x80004005
    Unspecified error

    phdprt015 Error: 0x80004005
    Unspecified error

    PHDPRT004. Error: 0x80004005
    Unspecified error

    phdprt004 Error: 0x80004005
    Unspecified error

    phdprt001 Error: 0x80004005
    Unspecified error

    phdprn1000 Error: 0x80004005
    Unspecified error

    kimmul01 Error: 0x80004005
    Unspecified error

    JHBWHSMUL07 Error: 0x80004005
    Unspecified error

    JHBWHSMUL06 Error: 0x80004005
    Unspecified error

    jhbwhsmul05 Error: 0x80004005
    Unspecified error

    jhbwhsmul02 Error: 0x80004005
    Unspecified error

    jhbwhsmul01 Error: 0x80004005
    Unspecified error

    jhbscssalmul01 Error: 0x80004005
    Unspecified error

    jhbpngmul02 Error: 0x80004005
    Unspecified error

    jhbpngmul01 Error: 0x80004005
    Unspecified error

    jhbmul26 Error: 0x80004005
    Unspecified error

    jhbmul25 Error: 0x80004005
    Unspecified error

    jhbmul24 Error: 0x80004005
    Unspecified error

    jhbmul23 Error: 0x80004005
    Unspecified error

    jhbmul22 Error: 0x80004005
    Unspecified error

    jhbmul21 Error: 0x80004005
    Unspecified error

    jhbmul20 Error: 0x80004005
    Unspecified error

    jhbmul19 Error: 0x80004005
    Unspecified error

    jhbmul18 Error: 0x80004005
    Unspecified error

    jhbmul17 Error: 0x80004005
    Unspecified error

    jhbmul16 Error: 0x80004005
    Unspecified error

    jhbmul15 Error: 0x80004005
    Unspecified error

    jhbmul14 Error: 0x80004005
    Unspecified error

    jhbmul12 Error: 0x80004005
    Unspecified error

    jhbmul11 Error: 0x80004005
    Unspecified error

    jhbmul10 Error: 0x80004005
    Unspecified error

    jhbmul09 Error: 0x80004005
    Unspecified error

    jhbmul08 Error: 0x80004005
    Unspecified error

    jhbmul07 Error: 0x80004005
    Unspecified error

    jhbmul05 Error: 0x80004005
    Unspecified error

    jhbmul04 Error: 0x80004005
    Unspecified error

    jhbmul03 Error: 0x80004005
    Unspecified error

    jhbmul02 Error: 0x80004005
    Unspecified error

    jhbmul01 Error: 0x80004005
    Unspecified error

    jhblbl34 Error: 0x80004005
    Unspecified error

    JHBFINMUL07 Error: 0x80004005
    Unspecified error

    jhbfinmul06 Error: 0x80004005
    Unspecified error

    jhbfinmul05 Error: 0x80004005
    Unspecified error

    jhbfinmul04 Error: 0x80004005
    Unspecified error

    jhbfinmul03 Error: 0x80004005
    Unspecified error

    jhbfinmul02 Error: 0x80004005
    Unspecified error

    jhbfinmul01 Error: 0x80004005
    Unspecified error

    jhbdebmul02 new Error: 0x80004005
    Unspecified error

    jhbdebmul02 Error: 0x80004005
    Unspecified error

    jhbdebmul01. Error: 0x80004005
    Unspecified error

    jhbdebmul01 Error: 0x80004005
    Unspecified error

    jhbdcmul01 Error: 0x80004005
    Unspecified error

    jhbdatmul01 Error: 0x80004005
    Unspecified error

    HRP_PE_LAZER Error: 0x80004005
    Unspecified error

    HRP_ELZ_LAZER Error: 0x80004005
    Unspecified error

    HRP_DBN_COPIER Error: 0x80004005
    Unspecified error

    HRP_CPT_LAZER Error: 0x80004005
    Unspecified error

    HRP_CPT_IT_LAZER Error: 0x80004005
    Unspecified error

    HRP_CPT_COPIER Error: 0x80004005
    Unspecified error

    HRP_CPT_ADMIN1 Error: 0x80004005
    Unspecified error

    HRP_CPT_ADMIN Error: 0x80004005
    Unspecified error

    HRP_BLM_LAZER Error: 0x80004005
    Unspecified error

    HRP_ACSA_COPIER Error: 0x80004005
    Unspecified error

    Fintrain02(RTT) Error: 0x80004005
    Unspecified error

    Fintrain01(SOS) Error: 0x80004005
    Unspecified error

    dbnmul02 Error: 0x80004005
    Unspecified error

    dbnmul01 Error: 0x80004005
    Unspecified error

    DBNADMGEN03 Error: 0x80004005
    Unspecified error

    cptmul02 Error: 0x80004005
    Unspecified error

    cptmul01 Error: 0x80004005
    Unspecified error

    conmul01 Error: 0x80004005
    Unspecified error

    blmmul01 Error: 0x80004005
    Unspecified error

    BLMADMMUL01 Error: 0x80004005
    Unspecified error

    LISTING PRINTER DRIVERS
    OKI C130n(PCL6), Windows x64, None Error: 0x80004005
    Unspecified error

    Brother HL-5250DN series, Windows x64, None Error: 0x80004005
    Unspecified error

    TP Output Gateway PS, Windows x64, None Error: 0x80004005
    Unspecified error

    TP Output Gateway, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio SP 4210N PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio SP 4110N PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio MP C3000 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio MP C2800 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio MP 6001 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    Ricoh Aficio MP 3010 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio MP 3010 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio MP 1600 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    RICOH Aficio 2027 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    PCL6 Driver for Universal Print, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG SP C811DN RPCS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG SP C811DN PS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG SP C811DN PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP C3000 PCL5c, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP C2000 PS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP C2000 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 5000 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 4000 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 3350 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 2550 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 161 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 1600 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG MP 1600 PCL, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm745 RPCS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm745 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm735 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm725 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm725 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm635 RPCS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm635 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm622 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm620 PS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm618 RPCS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm618 PS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm615 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSm415 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSc435 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSc38 PCL5c, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSc232 PS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG DSc224 PS, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG D415s/2815S/3215s PCL, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG C7416 PCL5c, Windows x64, None Error: 0x80004005
    Unspecified error

    NRG 6002/6005/6008 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    Kyocera Mita KM-1815 (KPDL), Windows x64, None Error: 0x80004005
    Unspecified error

    Kyocera KM-1820, Windows x64, None Error: 0x80004005
    Unspecified error

    KONICA MINOLTA Universal PS, Windows x64, None Error: 0x80004005
    Unspecified error

    KONICA MINOLTA 362/282/222 VPS, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Universal Printing PCL 6 (v5.1), Windows x64, None Error: 0x80004005
    Unspecified error

    HP Universal Printing PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Officejet Pro K850 Series, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Officejet H470 series BT, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Officejet 7300 series, Windows x64, None Error: 0x80004005
    Unspecified error

    HP LaserJet P4010_P4510 Series PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP LaserJet P3005 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP LaserJet 4350 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP LaserJet 4200/4300 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    hp LaserJet 1320 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Deskjet D2500 series, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Color LaserJet CP3525 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Color LaserJet CP1215, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Color LaserJet 9500 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Color LaserJet 3600, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Color LaserJet 3550, Windows x64, None Error: 0x80004005
    Unspecified error

    HP Color LaserJet 1600, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner MP4500/DSm745e PS, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner MP4500/DSm745e PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner MP C3001 PCL 5c, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner MP 161/DSm416 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner DSm415 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner DSc224 PCL 5c, Windows x64, None Error: 0x80004005
    Unspecified error

    Gestetner C7526dn PCL5c, Windows x64, None Error: 0x80004005
    Unspecified error

    Generic / Text Only, Windows x64, None Error: 0x80004005
    Unspecified error

    EPSON FX Series 1 (136), Windows x64, None Error: 0x80004005
    Unspecified error

    Canon iR3035/iR3045 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    Canon iR2220/iR3320 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    Canon iR2200-3300 PCL6, Windows x64, None Error: 0x80004005
    Unspecified error

    Brother MFC-7440N, Windows x64, None Error: 0x80004005
    Unspecified error

    Brother HL-6050D/DN series, Windows x64, None Error: 0x80004005
    Unspecified error

    Brother HL-5350DN, Windows x64, None Error: 0x80004005
    Unspecified error

    LISTING PRINTER PORTS
    10.99.36.30, TCP Error: 0x80004005
    Unspecified error

    10.99.51.113, TCP Error: 0x80004005
    Unspecified error

    BLMADMMUL01, TCP Error: 0x80004005
    Unspecified error

    blmmul01, TCP Error: 0x80004005
    Unspecified error

    conmul01, TCP Error: 0x80004005
    Unspecified error

    cptmul01, TCP Error: 0x80004005
    Unspecified error

    cptmul02, TCP Error: 0x80004005
    Unspecified error

    DBNADMGEN03, TCP Error: 0x80004005
    Unspecified error

    dbnmul01, TCP Error: 0x80004005
    Unspecified error

    dbnmul02, TCP Error: 0x80004005
    Unspecified error

    fintrain01, TCP Error: 0x80004005
    Unspecified error

    H31_10.37.110.136, TCP Error: 0x80004005
    Unspecified error

    heimlich, TCP Error: 0x80004005
    Unspecified error

    hiemlich, TCP Error: 0x80004005
    Unspecified error

    HRP_ACSA_COPIER, TCP Error: 0x80004005
    Unspecified error

    HRP_BLM_LAZER, TCP Error: 0x80004005
    Unspecified error

    HRP_CPT_ADMIN, TCP Error: 0x80004005
    Unspecified error

    HRP_CPT_ADMIN1, TCP Error: 0x80004005
    Unspecified error

    HRP_CPT_COPIER, TCP Error: 0x80004005
    Unspecified error

    HRP_CPT_IT_LAZER, TCP Error: 0x80004005
    Unspecified error

    HRP_CPT_LAZER, TCP Error: 0x80004005
    Unspecified error

    HRP_DBN_COPIER, TCP Error: 0x80004005
    Unspecified error

    HRP_ELZ_LAZER, TCP Error: 0x80004005
    Unspecified error

    HRP_PE_LAZER, TCP Error: 0x80004005
    Unspecified error

    IP_blmadmmul01, TCP Error: 0x80004005
    Unspecified error

    jhbdatmul01, TCP Error: 0x80004005
    Unspecified error

    jhbdcmul01, TCP Error: 0x80004005
    Unspecified error

    jhbdebmul01, TCP Error: 0x80004005
    Unspecified error

    JHBDEBMUL02, TCP Error: 0x80004005
    Unspecified error

    jhbfinmul01, TCP Error: 0x80004005
    Unspecified error

    jhbfinmul02, TCP Error: 0x80004005
    Unspecified error

    jhbfinmul03, TCP Error: 0x80004005
    Unspecified error

    jhbfinmul04, TCP Error: 0x80004005
    Unspecified error

    jhbfinmul05, TCP Error: 0x80004005
    Unspecified error

    jhbfinmul06, TCP Error: 0x80004005
    Unspecified error

    JHBFINMUL07, TCP Error: 0x80004005
    Unspecified error

    jhblbl34, TCP Error: 0x80004005
    Unspecified error

    jhbmul01, TCP Error: 0x80004005
    Unspecified error

    jhbmul02, TCP Error: 0x80004005
    Unspecified error

    jhbmul03, TCP Error: 0x80004005
    Unspecified error

    jhbmul04, TCP Error: 0x80004005
    Unspecified error

    jhbmul05, TCP Error: 0x80004005
    Unspecified error

    jhbmul06, TCP Error: 0x80004005
    Unspecified error

    jhbmul07, TCP Error: 0x80004005
    Unspecified error

    jhbmul08, TCP Error: 0x80004005
    Unspecified error

    jhbmul09, TCP Error: 0x80004005
    Unspecified error

    jhbmul10, TCP Error: 0x80004005
    Unspecified error

    jhbmul11, TCP Error: 0x80004005
    Unspecified error

    jhbmul12, TCP Error: 0x80004005
    Unspecified error

    jhbmul13, TCP Error: 0x80004005
    Unspecified error

    jhbmul14, TCP Error: 0x80004005
    Unspecified error

    jhbmul15, TCP Error: 0x80004005
    Unspecified error

    jhbmul16, TCP Error: 0x80004005
    Unspecified error

    jhbmul17, TCP Error: 0x80004005
    Unspecified error

    jhbmul18, TCP Error: 0x80004005
    Unspecified error

    jhbmul19, TCP Error: 0x80004005
    Unspecified error

    jhbmul20, TCP Error: 0x80004005
    Unspecified error

    jhbmul21, TCP Error: 0x80004005
    Unspecified error

    jhbmul22, TCP Error: 0x80004005
    Unspecified error

    jhbmul23, TCP Error: 0x80004005
    Unspecified error

    jhbmul24, TCP Error: 0x80004005
    Unspecified error

    jhbmul25, TCP Error: 0x80004005
    Unspecified error

    jhbmul28, TCP Error: 0x80004005
    Unspecified error

    jhbpngmul01, TCP Error: 0x80004005
    Unspecified error

    jhbpngmul02, TCP Error: 0x80004005
    Unspecified error

    jhbscssalmul01, TCP Error: 0x80004005
    Unspecified error

    jhbwhsmul01, TCP Error: 0x80004005
    Unspecified error

    jhbwhsmul02, TCP Error: 0x80004005
    Unspecified error

    jhbwhsmul05, TCP Error: 0x80004005
    Unspecified error

    JHBWHSMUL06, TCP Error: 0x80004005
    Unspecified error

    JHBWHSMUL07, TCP Error: 0x80004005
    Unspecified error

    kimmul01, TCP Error: 0x80004005
    Unspecified error

    phdprt001, TCP Error: 0x80004005
    Unspecified error

    phdprt004, TCP Error: 0x80004005
    Unspecified error

    phdprt015, TCP Error: 0x80004005
    Unspecified error

    phdprt036, TCP Error: 0x80004005
    Unspecified error

    PHDPRT048, TCP Error: 0x80004005
    Unspecified error

    PHDPRT049, TCP Error: 0x80004005
    Unspecified error

    PHDPRT061, TCP Error: 0x80004005
    Unspecified error

    PHDPRT073, TCP Error: 0x80004005
    Unspecified error

    PHDPRT082, TCP Error: 0x80004005
    Unspecified error

    PHDPRTKEN001, TCP Error: 0x80004005
    Unspecified error

    plzmul01, TCP Error: 0x80004005
    Unspecified error

    plzmul02, TCP Error: 0x80004005
    Unspecified error

    REVFD, TCP Error: 0x80004005
    Unspecified error

    revfin, TCP Error: 0x80004005
    Unspecified error

    revops, TCP Error: 0x80004005
    Unspecified error

    revspeops, TCP Error: 0x80004005
    Unspecified error

    rttgjhbacc01, TCP Error: 0x80004005
    Unspecified error

    rttgjhbacc1, TCP Error: 0x80004005
    Unspecified error

    rttgmul01, TCP Error: 0x80004005
    Unspecified error

    SCSJHBSALESMUL02, TCP Error: 0x80004005
    Unspecified error

    SCSJHBSALESMUL05, TCP Error: 0x80004005
    Unspecified error

    welcmul01, TCP Error: 0x80004005
    Unspecified error

    kengen01, TCP Error: 0x80004005
    Unspecified error

    kengen02, TCP Error: 0x80004005
    Unspecified error

    kengen03, TCP Error: 0x80004005
    Unspecified error

    LISTING PRINT PROCESSORS
    tpwinprn Windows x64 TPWinPrn.dll Error: 0x80004005
    Unspecified error

    RPCSPRN Windows x64 RC00C1B1.dll Error: 0x80004005
    Unspecified error

    KOB__A_P Windows x64 KOB__A_P.DLL Error: 0x80004005
    Unspecified error

    KOBZ2ABP Windows x64 KOBZ2ABP.DLL Error: 0x80004005
    Unspecified error

    hpzppwn7 Windows x64 hpzppwn7.dll Error: 0x80004005
    Unspecified error

    hpzppw71 Windows x64 hpzppw71.dll Error: 0x80004005
    Unspecified error

    hpcPP6dn Windows x64 hpcpp6dn.DLL Error: 0x80004005
    Unspecified error

    hpcpp6de Windows x64 hpcpp6de.DLL Error: 0x80004005
    Unspecified error

    HPCPP5r1 Windows x64 hpcpp5r1.DLL Error: 0x80004005
    Unspecified error

    hpcpp107 Windows x64 hpcpp107.dll Error: 0x80004005
    Unspecified error

    E418PP64 Windows x64 E418PP64.dll Error: 0x80004005
    Unspecified error

    E318PP64 Windows x64 E318PP64.dll Error: 0x80004005
    Unspecified error

    BrPrint Windows x64 BRPP64A.DLL Error: 0x80004005
    Unspecified error

    Check the eventlog for detailed information about the error which occurred.

    The following error occurred: 0x80070709.
    The printer name is invalid.

    Check the eventlog for detailed information about the error which occurred.Randy Coburn MCITP - Server Administrator. Since light travels faster than sound people may appear to be bright un till they speak.

    DB:2.81:Printbrm Event Id 71 88

    My workaround was to rename the winprint.dll on the destination server to winprint.dll.old.

  • RELEVANCY SCORE 2.81

    DB:2.81:Help Recreating .Vmdk Descriptor Files **Andr** 7x



    The datastore where my vm is located became "full" and it has corrupted the vmdk files and now my vm will not "Power On"

    I receive the error "File unspecified filename was not found.

    I believe my situation is similar to this discussion:

    https://communities.vmware.com/message/2292803

    Any help would be greatly appreciated.

    Thank you.

    DB:2.81:Help Recreating .Vmdk Descriptor Files **Andr** 7x


    My bad, I do see several now.. I will make the changes accordingly.

    Once the changes are made, would I be able to power on that vm or no?

  • RELEVANCY SCORE 2.79

    DB:2.79:Unable To Remove Snapshot pp



    Hi,

    got the below error when trying to run a backup using veeam backup and replication 5.0 the backup fails . wondering what it is and how I may resolve this.

    Initializing target session RemoveSnapshot failed, snapshotRef "112-snapshot-4", timeout "3600000" Unable to access file unspecified filename since it is locked

    running ESX vspher 4.1

    Joe.

    DB:2.79:Unable To Remove Snapshot pp


    can you create manual snapshot first to this vm?

    than afterthat remove all snapshot on this vm to clear the snapshot created by another 3rd party software.

    this also maybe because the vmware tools version or installer.

    try to reinstall the vmware tools with custom uncheck the vss drivers for windows

  • RELEVANCY SCORE 2.79

    DB:2.79:Can't Power On Vms "Unable To Access File Since It Is Locked" fz



    VMs were running fine - then storage system went down. After storage system came back up I can't power on a number of VMs. Getting this error when I try to power them on:

    Cannot power On vmname on esxhostname.xxxxx.com. Unable to access file unspecified filename since it is lockederror

  • RELEVANCY SCORE 2.79

    DB:2.79:Snapshot Removal 37


    I seem to have a minor problem with a snapshot and i need a little assistance. It appears there is a snapshop and when vcenter tries to remove it the error comes up Unable to access the file lt;unspecified filenamegt; since it is locked. I'm not sure why but there are a few delta files in that folder. My guess is that the backup is causing this. Can anyone tell me how to get out of this?? Any help is appreicated.

    Perry

    DB:2.79:Snapshot Removal 37


    I did one time and none of teh snapshots showed up in the snapshot manager. I tried it again and i think it's working. Thanks!!!

  • RELEVANCY SCORE 2.77

    DB:2.77:Where's Shortcut Config File For Shortcut Keys? 17


    Why are there 2 identically named window "next file" commands? The one defaulted to ctrl-tab has a window popup which I dont want, so I tried to remap ctrl-tab to the other one but am unable to since that key combination is intercepted by the JVM or OS. So I'd like to manually edit the configuration file for shortcuts...what is the file location and filename?

    DB:2.77:Where's Shortcut Config File For Shortcut Keys? 17

    Why are there 2 identically named window "next file" commands? The one defaulted to ctrl-tab has a window popup which I dont want, so I tried to remap ctrl-tab to the other one but am unable to since that key combination is intercepted by the JVM or OS. So I'd like to manually edit the configuration file for shortcuts...what is the file location and filename?

  • RELEVANCY SCORE 2.77

    DB:2.77:Cannot Deploy Agent After Upgrade To 8.8 3m



    We recently went from 8.7 sp3 to 8.8 and since doing so, we cannot deploy the agent through the LANdesk console. If you manually run the installer from the client it works, but pushing it fails, on any unmanaged pc. Here is the log file from one of the attempted pushes:

    [Operation failed] RemoteExecute, cmd /c mkdir C:\$ldcfg$CBA 8 X509 operation : -2147481845 (8000070b8u) : Unable to contact the remote agent.NT File Sharing : 1222 (4c68u) : The network is not present or not started.NT File Sharing : 1312 (5208u) : A specified logon session does not exist. It may already have been terminated.NT File Sharing : 1312 (5208u) : A specified logon session does not exist. It may already have been terminated.NT File Sharing : 1312 (5208u) : A specified logon session does not exist. It may already have been terminated.NT File Sharing : 1312 (5208u) : A specified logon session does not exist. It may already have been terminated.NT File Sharing : 1312 (5208u) : A specified logon session does not exist. It may already have been terminated.NT File Sharing : 1312 (5208u) : A specified logon session does not exist. It may already have been terminated.Secure Shell : 1805 (70d8u) : An unspecified error in the protocol occured.Remote execute using TCP failed, result 0x0000057a (1402)On unmanaged systems this operation will attempt to access the ADMIN$ file share and remotely start a service

    DB:2.77:Cannot Deploy Agent After Upgrade To 8.8 3m


    The scheduler service does not need to be an admin if redeploying agents since it will use the file transfer and remote execute functions of the agent already in place. Still a good idea to have it set though since often you will redeploying the agent because it doesn't work properly so relying on a faulty agent to redeploy is not a good idea.

    Mark Star - MarXtar LANDesk Enhancements

    Home of Power State Notifier Wake-On-WAN for LANDesk

  • RELEVANCY SCORE 2.72

    DB:2.72:File Unspecified Filename Was Not Found df



    After moving a VM from one data store to a diffrent datastor I get the error "File lt;unspecified filenamegt; was not found". I've tried to revert to an older snapshot and I get a message that says, "Detected an invalid snapshot configuration". Anyone got any ideas??

    DB:2.72:File Unspecified Filename Was Not Found df


    Ok so to go along with you answer,... I should move it back to the original datastore,... What if I have four datastores and don't remember which one it was originally in? is there a quick easy way to tell, with out having to move it to all four and try a process of elimination? Also how do you "commit/delete" the snap shots?,.... Thanks in advance!!

  • RELEVANCY SCORE 2.72

    DB:2.72:Apply Properties File d7


    I am suddenly unable to apply properties - name, track no. etc. to audio files. Apply Properties File dialogue box shows message
    "Error 0x80004005: unspecified error" and says that this is stopping me applying properties to those files. What is this and how can it be fixed if it is "unspecified"?

    DB:2.72:Apply Properties File d7

    Hi Deepak,
    Lot of new stuff to me here, had to look some of those terms up! Problems appear to be confined to MP3 files:- pictures and other files are not affected. Checked 'security' and permissions were set at 'full control', but now that dialogue box will not
    close. Did not have a problem with editing ID3 tags last time I tried a couple of months ago.

  • RELEVANCY SCORE 2.71

    DB:2.71:Snapshot Deletion Problem - Unable To Access File Unspecified Filename Since It Is Locked. 7a



    Guys,

    I'm having a problem to delete a snapshot from vSphere console. I'm running with vSphere v5.1.

    I had tried to recreate the snapshot and perform full deletion and its appears the same. I also restarted the Management Agents on the ESXi host where the VM was parked. But the problem still remain the same. Any thought and helpful that might be help to resolve this issue for me?

    My backup keep failing because the snapshot unable to remove from the host.

    Remove all snapshots

    *********

    Unable to access file unspecified filename since it is locked

    ********

    *********************

    7/7/2014 8:41:04 AM

    7/7/2014 8:41:04 AM

    7/7/2014 8:41:16 AM

    DB:2.71:Snapshot Deletion Problem - Unable To Access File Unspecified Filename Since It Is Locked. 7a


    In vSphere Client, you can go to Tasks and Events tab of an ESXi host and it will shot you the tasks. It can be a vMotion activity, VM snapshot creation, power on or power off operation of VM, etc.

  • RELEVANCY SCORE 2.70

    DB:2.70:How Can I Access Filename From File (Sender) 13



    hi All,

    can anybody tell me

    how can i access filename from file (sender)?

    thank u

    swari

    DB:2.70:How Can I Access Filename From File (Sender) 13


    Hi

    Use the ASMA Filename in your sender communication channel

    Check this for reference

    The specified item was not found.

    Thanks

    Gaurav

  • RELEVANCY SCORE 2.65

    DB:2.65:Vm Using Snapshot Disks Created By Veeam 1x



    HI, I am experiencing a problem when consolidating disks on a VM that continues to fail during backup I use VEEAM backup 6.5 with the latest patches. The server is showing up with a lot of files _1-000006.vmdk etc. When I try and consolidate the disks it fails with" Unable to access file unspecified filename" . We had a look at locked files\processes but nothing shows up. We are unable to clone the VM to different storage due to the failure of the consolidation. I also see that my VM Disks are using the snapshot file-000001.vmdk and -000036.vmdk which concerns me. How do I fix this without losing my VM and so that I can continue to do backups? Any help will be appreciated!! Thank you.

    DB:2.65:Vm Using Snapshot Disks Created By Veeam 1x


    As far as I know, the helper snapshots created by Veeam during backup/replication activity should be automatically deleted after the corresponding job is finished. Even the orphaned snapshots should be deleted during the next job run.

    If you're unable to delete/consolidate snapshots manually, I recommend opening a ticket with Veeam support team and letting them confirm your environment.

    Cheers.

  • RELEVANCY SCORE 2.64

    DB:2.64:Eroom Limit On Number Of Versions? 3d



    A user reported getting an error when trying to look at the versions of a particular document. The error is: Unfortunately, eRoom was unable to generate the page you requested, because this operation could not be performed. An unspecified failure has occurred. This also happens with me, the Site Administrator.

    After looking deeper, I noticed there were over 2k versions of the file! I am assuming we've hit some sort of limit, but the question now is - how can I clean this up so the user can get access to their documents?

    DB:2.64:Eroom Limit On Number Of Versions? 3d


    Hi,

    Like Oliver mentioned there is a support note about this describing what you can do to resolve this. The support note you need to follow is this one - https://solutions.emc.com/emcsolutionview.asp?id=esg90669

    If you want to delete all of the previous versions you can right click on the icon and un-check this track versions option. After you have done this you'll only have the most recent version of the file available. You can then re-enable track versioning if you want to track versions again.

    Anders

  • RELEVANCY SCORE 2.64

    DB:2.64:Errore In Fase Di Rimozione Snapshot z8


    Buonasera,
    ho un problema con vSphere 4.1 in fase di rimozione di uno snapshot, quest'ultimo viene s rimosso ma appare subito dopo il seguente messaggio di errore:

    Remove all snapshots
    test/test-64bit_ibm_replica_replica
    Unable to access file unspecified filename since it is locked
    root

    ho anche provato a riavviare l'host fisico ma l'errore compare sempre.
    Grazie.

    -
    Salvatore.

    DB:2.64:Errore In Fase Di Rimozione Snapshot z8


    Ciao,

    non so che versione utilizzi di vSphere, ma se fai uno storage vmotion su un altro datastore il problema dovrebbe risolversi.

  • RELEVANCY SCORE 2.63

    DB:2.63:Snapshots Sometimes Fail To Delete 7d



    HI

    Sometimes the VM snapshots do not get deleted because off errors like:

    - Unable to access file, unspecified filename

    - Unable to access file, unspecified filename since it is locked

    - The virtual disk is either corrupted or not a supported format

    This only happens on the deletion of the snapshots, and happens on 1-2 VMs per day.

    As far as I can tell it is not always the same VMs, but I'm still monitoring it

    The Snapshots is created by NetBackups VCB Backup method and backs up 100%

    I looks like the Snapshot deletion has a retry attempt that fails with the same error

    - the object has already been delete or has not completely been created

    What happens is the Consolidate helper does not show in Snapshot manager, and i need to go

    through all the vmdk's (RVTools) to look for Orphaned/rogue snapshots and then manually delete them

    Q: Why would the files be locked or snapshot removal fail?

    Help will be appreciated

    Thanks

    DB:2.63:Snapshots Sometimes Fail To Delete 7d


    The Support Call managed to sort out the problem with the specific VM.

    Turned out that a Host NIC was locking the -flat.vmdk File.

    I agree with the notifications that would make it allot easier to manage, I will suggest this to the Backup team

    Thanks for everyone responses

  • RELEVANCY SCORE 2.63

    DB:2.63:Printbrm Restore Fails, Driver Package Failed Signature Validation. Error = 0xe000024b zm


    Hi there,
    i backup up my printserver with printbrm and just reinstalled my Test Lab. Now i wanted to import the printbrm package and get following error.
    C:\Windows\System32\spool\toolsPrintBrm.exe -r -f F:\A*******.printerExport
    Operation mode: restore
    Target server: local machine
    Target file path: F:\A*******.printerExport.
    Queue publish mode: none
    Overwrite mode: keep existing settings
    Queue ACL mode: restore ACLs from backup
    LISTING PRINT QUEUES
    PTRZ0101
    LX-T642
    LX-T632
    Lexmark X203n PS3
    HP-INK2300
    HP LaserJet-MFP-M725
    HP LaserJet Pro MFP M521 PCL 6
    HP Designjet 800 42 by HP
    Brother HL-S7000DN series
    LISTING PRINTER DRIVERS
    RICOH Aficio MP C300 PCL 5c, Windows x64, None
    PCL6 Driver for Universal Print, Windows x64, None
    Lexmark X203n PS3, Windows x64, None
    Lexmark Universal, Windows x64, None
    HP LaserJet Pro MFP M521 PCL 6, Windows x64, None
    HP LaserJet MFP M725 PCL 6, Windows x64, None
    HP Designjet 800 42 by HP, Windows x64, None
    HP Business Inkjet 2300 PCL 5c, Windows x64, None
    Brother HL-S7000DN series, Windows x64, None
    LISTING PRINTER PORTS
    A******.m***.local, TCP
    A******.m***.local, TCP
    A******.m***.local, TCP
    A******.m***, TCP
    A******.m***, TCP
    A******.m***, TCP
    A******.M***, TCP
    LISTING PRINT PROCESSORS
    LMUD064C Windows x64 LMUD064C.DLL
    LMACO54C Windows x64 LMACO54C.DLL
    hpzpp3zi Windows x64 hpzpp3zi.dll
    HPCPP145 Windows x64 hpcpp145.dll
    hpcpp140 Windows x64 hpcpp140.DLL
    Restoring Printer Drivers...
    ************ 0% ************
    The following objects failed to install:

    LISTING PRINT QUEUES
    PTRZ0101 Error: 0x80004005
    Unspecified error
    LX-T642 Error: 0x80004005
    Unspecified error
    LX-T632 Error: 0x80004005
    Unspecified error
    Lexmark X203n PS3 Error: 0x80004005
    Unspecified error
    HP-INK2300 Error: 0x80004005
    Unspecified error
    HP LaserJet-MFP-M725 Error: 0x80004005
    Unspecified error
    HP LaserJet Pro MFP M521 PCL 6 Error: 0x80004005
    Unspecified error
    HP Designjet 800 42 by HP Error: 0x80004005
    Unspecified error
    Brother HL-S7000DN series Error: 0x80004005
    Unspecified error
    LISTING PRINTER DRIVERS
    RICOH Aficio MP C300 PCL 5c, Windows x64, None Error: 0x80004005
    Unspecified error
    PCL6 Driver for Universal Print, Windows x64, None Error: 0x80004005
    Unspecified error
    Lexmark X203n PS3, Windows x64, None Error: 0x80004005
    Unspecified error
    Lexmark Universal, Windows x64, None Error: 0x80004005
    Unspecified error
    HP LaserJet Pro MFP M521 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error
    HP LaserJet MFP M725 PCL 6, Windows x64, None Error: 0x80004005
    Unspecified error
    HP Designjet 800 42 by HP, Windows x64, None Error: 0x80004005
    Unspecified error
    HP Business Inkjet 2300 PCL 5c, Windows x64, None Error: 0x80004005
    Unspecified error
    Brother HL-S7000DN series, Windows x64, None Error: 0x80004005
    Unspecified error
    LISTING PRINTER PORTS
    A***l, TCP Error: 0x80004005
    Unspecified error
    A***, TCP Error: 0x80004005
    Unspecified error
    a***, TCP Error: 0x80004005
    Unspecified error
    A***, TCP Error: 0x80004005
    Unspecified error
    A***, TCP Error: 0x80004005
    Unspecified error
    A***, TCP Error: 0x80004005
    Unspecified error
    A***, TCP Error: 0x80004005
    Unspecified error
    LISTING PRINT PROCESSORS
    LMUD064C Windows x64 LMUD064C.DLL Error: 0x80004005
    Unspecified error
    LMACO54C Windows x64 LMACO54C.DLL Error: 0x80004005
    Unspecified error
    hpzpp3zi Windows x64 hpzpp3zi.dll Error: 0x80004005
    Unspecified error
    HPCPP145 Windows x64 hpcpp145.dll Error: 0x80004005
    Unspecified error
    hpcpp140 Windows x64 hpcpp140.DLL Error: 0x80004005
    Unspecified error

    Check the eventlog for detailed information about the error which occurred.

    The following error occurred: 0x800f024b.
    The hash for the file is not present in the specified catalog file. The file is
    likely corrupt or the victim of tampering.
    Check the eventlog for detailed information about the error which occurred.

    Funny thing because this is the backup of exactly the same server with the same file level before reinstalling the lab environment.

    Also checked the setupapi.dev.log.
    sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE} 16:51:59.853
    inf: Opened INF: 'C:\Windows\System32\DriverStore\Temp\{4183c33c-964b-3649-9aaf-88308d214a19}\ntprint.inf' ([strings])
    sig: {_VERIFY_FILE_SIGNATURE} 16:51:59.869
    sig: Key = ntprint.inf
    sig: FilePath = C:\Windows\System32\DriverStore\Temp\{4183c33c-964b-3649-9aaf-88308d214a19}\ntprint.inf
    sig: Catalog = C:\Windows\System32\DriverStore\Temp\{4183c33c-964b-3649-9aaf-88308d214a19}\ntprint.cat
    sig: Success: File is signed in catalog.
    sig: {_VERIFY_FILE_SIGNATURE exit(0x00000000)} 16:51:59.900
    sto: Validating driver package files against catalog 'ntprint.cat'.
    !!! sto: Failed to verify file 'UNIRES.DLL' against catalog. Catalog = ntprint.cat, Error = 0xE000024B
    !!! sto: Catalog did not contain file hash. File is likely corrupt or a victim of tampering.
    !!! sto: Driver package appears to be tampered. Filename = C:\Windows\System32\DriverStore\Temp\{4183c33c-964b-3649-9aaf-88308d214a19}\ntprint.inf, Error = 0x800F024B
    !!! sto: Driver package appears to be tampered, and it will not be installed.
    !!! ndv: Driver package failed signature validation. Error = 0xE000024B
    sto: {DRIVERSTORE_IMPORT_NOTIFY_VALIDATE exit(0xe000024b)} 16:51:59.900
    !!! sto: Driver package failed signature verification. Error = 0xE000024B
    !!! sto: Failed to import driver package into Driver Store. Error = 0xE000024B
    sto: {Stage Driver Package: exit(0xe000024b)} 16:52:00.166
    !!! sto: Failed to stage driver package to Driver Store. Error = 0xE000024B, Time = 1063 ms
    Section end 2013/10/23 16:52:00.197
    [Exit status: FAILURE(0xe000024b)]
    I disabled driver signing in GPO, with no success. Yes i did gpupdate, and yes i restared the machine, nevertheless its a user setting.
    I checked
    http://social.technet.microsoft.com/Forums/windows/en-US/9b6eee60-855d-47cc-9927-acae3fb6f971/permanently-disable-driver-signature-enforcement-on-win-7-x64?forum=w7itprohardware
    and
    http://social.technet.microsoft.com/Forums/windowsserver/zh-TW/9fe186e4-52f7-4552-a223-b2320cfc9ed5/driver-install-semi-fails-with-800f024b
    but nothing solved my problem.
    Seems to be a problem with the unires.dll a dependent file from the HP Business Inkjet 2300 PCL 5c Driver (unidrv.dll). But why, i installed the driver bevore properly, with no issues. So why does the system block the import / install with printbrm? The
    environment is installed from the same repository, so there is no difference.
    Any suggestions? Best, Florian

    DB:2.63:Printbrm Restore Fails, Driver Package Failed Signature Validation. Error = 0xe000024b zm

    Hi again,
    finally Bernd Högen from Microsoft EMEA GTSC found a solution! Just wanted to post it here if someone else is having this issue.
    The setupapi.dev.log points to the ntprint.inf (the Windows Core Printer Driver) which cannot be imported because the Driver Package could not be verified.
    !!! sto: Failed to verify file 'UNIRES.DLL' against catalog. Catalog = ntprint.cat, Error = 0xE000024B
    !!! sto: Catalog did not contain file hash. File is likely corrupt or a victim of tampering.
    The Windows Core Printer Driver is already preinstalled in Windows, so you dont need to import it.

    1. Create a PrintBrm Backup on the Printserver
    Open up an elevated command prompt and go to C:\Windows\System32\spool\tools
    PrinBrm -b f F:\PRNTMGMT\PRINTSRV
    2. Restore the PrintBrm Packed into a temp Dir on Destination Server
    Open up an elevated command prompt and go to C:\Windows\System32\spool\tools
    PrintBrm.exe -r -d f:\PRNTMGMT\EXPAND -f F:\PRNTMGMT\PRINTSRV
    3. Open F:\PRNTMGMT\PRINTSRV\BrmDrivers.xml and delete all Entries associated with ntprint.inf. In my Case the last two elements.
    4. Create a new PrintBrm Package on Destination Server
    C:\Windows\System32\spool\toolsPrintBrm.exe -b -d F:\PRNTMGMT\EXPAND -f F:\PRNTMGMT\PRINTSRV
    5. Import the PrintBrm Package
    PrintBrm.exe -r -f f:\PRNTMGMT\PRINTSRV
    Your PrintBrm Package Import should work now.
    Best, Florian

  • RELEVANCY SCORE 2.63

    DB:2.63:Unable To Access A File Since Its Locked j8


    I am trying to power on a vm but getting the error in vc saying

    Unable to accessa file since it is locked.

    Any idea?

    DB:2.63:Unable To Access A File Since Its Locked j8


    a blinking cursor?

    http://kb.vmware.com/kb/1006296

    http://kb.vmware.com/kb/1006556

    ...also, check out this thread

    http://communities.vmware.com/thread/226146

  • RELEVANCY SCORE 2.62

    DB:2.62:Snapshot Problem Locked 3p



    Hi,

    I have a problem with snapshot on many VM.

    I can't remove snapshot, i have this error: Unable to access file unspecified filename since it is locked"

    I tried to do a new snapshot then delete all but same problem, all snapshot stay in the vm folder as you can the in my screenshot.

    Same same with the VM switch off and same problem.

    I have vmware ESXi 4.1 Essential build 260247.Could you help me please?

    How can i merge all snapshot into my default disk?

    Regards

    DB:2.62:Snapshot Problem Locked 3p


    The only unusual thing I see is the "000S302LOTU.nvram" file, however please don't touch it since it is used by the VM.

    I'd suggest you take a look at your backup server. I'm almost sure it's the backup software which has some files in use and causes the issue.

    Andr

  • RELEVANCY SCORE 2.62

    DB:2.62:Unable To Change Virtual Machine Power State: Unable To Open File "": pk



    I am unable to resume a winXP vm. When I try I get the following error:

    Unable to change virtual machine power state: Unable to open file "": Insufficient permission to access file..

    There is no filename listed I am the owner of all files in the directory for that vm. The vm is a linked state clone, but I don't know what to check for permissions wise to see if that is affecting the error.

    DB:2.62:Unable To Change Virtual Machine Power State: Unable To Open File "": pk


    Glad you found the cause of the problem - it started to sound strage :-D

    Regards,

    Jens

  • RELEVANCY SCORE 2.61

    DB:2.61:Could Not Remove Scsi Device za



    Hi,

    Following is the procedure used to backup vmdk files of a VM using VDDK.1. Take a snapshot of the VM.2. Connect using VDDK3. Open base vmdk file4. Read vmdk files and do backup5. Close vmdk file6. Disconnect using VDDK7. Delete the snapshot of the VM

    We have tried backup of a VM using hotadd mode (using above procedure) and at the end(possibly during disconnect) it fails with following error in vddk output log file.

    2010-12-29 23:09:12.193 diskLibPlugin: [2010-12-29 23:09:12.193 00552 verbose 'transport'] Could not remove SCSI device: adapter 0, target 1, error -536870373

    2010-12-29 23:09:12.205 diskLibPlugin: [2010-12-29 23:09:12.205 00552 verbose 'transport'] Could not remove SCSI device: adapter 0, target 3, error -536870373

    After this, the delete snapshot operation fails with error "Unable to access file since it is locked unspecified file name".

    Please help us in finding what could cause to generate above error message.

    Note: The backup works fine with hotadd mode.

    Environment Details:ESXi 4.1VDDK 1.2Guest OS: Windows 2008 R2

    Thanks in Advance

    DB:2.61:Could Not Remove Scsi Device za


    Just to make sure, can you ensure that all VDDKs calls(including VixDiskLib_Exit) are done before you try to delete the snapshot?

    HTH,

    -Mani.

  • RELEVANCY SCORE 2.60

    DB:2.60:Have A "Virtual Machine Disks Conslidation Is Needed" Message And Consolidating Fails On Vsphere 5.0. ca



    I currenlty have a SQL Server 2008 VM running on an vSphere 5.0 ESXi host that currently doesn't have any snapshots in the Snapshot Manager but has multiple VM-000001.vmdk, VM-000001-delta.vmdk, VM-000002.vmdk, VM-000002-delta.vmdk via SSH from previous snapshots that didn't appear to consolidate into the VM.vmdk file during previous snapshot consolidations. Also the VM-000001.vmdk shows up while browsing the datastore but not the VM-000001-delta.vmdk file. Any ideas on how to get these delta's consolidated? The new "Snapshot--Consolidate" option fails with the message of "Unable to access file unspecified filename since it is locked".

    Log is attached during consolidation attempt.

    Thanks

    DB:2.60:Have A "Virtual Machine Disks Conslidation Is Needed" Message And Consolidating Fails On Vsphere 5.0. ca


    I was able to locate the issue due to another issue I was having with cloning. I believe this issue was a compounded issue and the "Consolidate" option should have worked but since attempting to clone the VM and it failing, I was unable to use the "Consolidate" option since the cloning task was still active but didn't show within vCenter as being active so but here is what I did to resolve this issue which are resolutions pull out of the KB @ http://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=10051 if anyone else runs into this issue:

    1. SSH into the ESXi host using Putty or another SSH client.

    2. Drilled down to the Datastore where the VM in question resides: cd /vmfs/volumes/datastore/VMDIR

    3. Locate the vmware.log and open with a text viewer. I used cat vmware.log to view the log. Also, used putty and set my session to log all screen output but you could extract that log to better review.

    4. After you open the log, see if you see any errors regarding locked files, etc. (These errors existed in my case)

    5. If errors exist such as "Failed to lock the file" there is possibly a active process that didn't stop correctly from a previous failed task.

    6. Run # lsof | grep name_of_locked_file

    7. Next run Kill PID . The PID should be at the begining from the output in step 6 which has been underlined in the following example. (EX: 5303 vpxa-worker 12 29 /vmfs/volumes/4360c6cf-2fee4d90-2404-5ef3fc344abb/VM/name_of_locked_file)

    8. The host may appear to have went offline for a few seconds if you happen to have a vSphere client open but should reconnect.

    9. Next, select the VM which should still have a mesage of "Virtual machine disks consolidation is needed" and select Snapshot--Consolidate.

    10. The file should begin to consolidate and the error message should disappear.

    Not sure if this will help anyone since I was my own worst enemy in this case.


  • RELEVANCY SCORE 2.58

    DB:2.58:Virtual Machine Disk Consolidation Failed c8



    Hello Everyone,

    I am facing issue in my environment while doing for a disk consolidation from snapshot option.

    the error is giving me as " Unable to access file unspecified filename since it is locked". i tried teh below command

    #esxcli vm process list ( to checke the VM WID)

    #esxcli vm process kill --type soft --world-id XXXXX

    Above step did not worked stil it was showing unspecified file is locked.

    Then i check with

    #ps | grep vmx

    # then Kill - 9 PID (which is the parent process ID)

    My VM got rebooted but issue did not resolved. Please help me or give me the path to find the lock unspecified and how do i unlock the same.

    Thanks,

    Subhadeep Sen

    DB:2.58:Virtual Machine Disk Consolidation Failed c8


    this is well known issue in vadp backup. but none of the backup vendor resolving this issue and they always advice us to upgrade vmware esxi,vcenter or else their backup product. I'm also facing the same issue and as temporary solution what you need to do restart vpxa agent in snapshot issue vm running esxi and manually consolidate the snapshots again. if you do restart vpxa agent then lock will be released you may consolidate easily.

  • RELEVANCY SCORE 2.58

    DB:2.58:I Am Unable To Access Help In Office 2010. Unable To Download Error 7s


    I recently installed Office 2010 on my laptop. I was able to access Help from Excel until about an hour ago. Now when I try I get this message Unable to download error.htm from MS.EXCEL.14.1033 Unspecified Error. Cansomeone help me?

  • RELEVANCY SCORE 2.58

    DB:2.58:Get Error Message While Created Snapshot sc



    Dear Sir:

    I created a virtual machine in my DL 380 G7 server. In the VM has a virtual hard disk capacity 2TB. I got error message when I created snapshot.

    Error message is "File unspecified filename is larger than the maximum size supported by datastore 'unspecified datastore".

    The datastore type is vmfs5 and block size is 1MB (cause vmfs 5 limite maximum block size 1MB).

    How can I solve the error message?

    Thanks!

    DB:2.58:Get Error Message While Created Snapshot sc


    Dear Sir:

    I created a virtual machine in my DL 380 G7 server. In the VM has a virtual hard disk capacity 2TB. I got error message when I created snapshot.

    Error message is "File unspecified filename is larger than the maximum size supported by datastore 'unspecified datastore".

    The datastore type is vmfs5 and block size is 1MB (cause vmfs 5 limite maximum block size 1MB).

    How can I solve the error message?

    Thanks!

  • RELEVANCY SCORE 2.58

    DB:2.58:This.Getpagenthword And Background Image Problem d8



    Hi Folks,

    I'm having issues with this.getPageNthWord. I use this script to get a certain string via regexp from a document. After this string is retrieved it is used to create a copy of the same document via extractPages. Sometimes there will be a pretty large background image inside my pdfs. If this is the case the method is unable to get any text-ish information out of the document at all. The whole process looks like this:

    1. Use Access and Indesign to create a PDF with certain data and images from a blueprint.

    2. Result is a approx. 1200 pages long pdf file with around 200 Datasets

    3. Split these Pages and use a string in the current set as filename (this is where the error occurs, returns null).

    4. check if this file already exsists and add a "_n++" at the end if true

    5. save these pages to the given path

    i have uploaded a few screenshots to my flickr account to show an example of a file that works quite well and another one that doesnt work at all.

    http://www.flickr.com/photos/57181796@N08/

    im sorry but i cannot share the original files with you since they use client data.

    this is the full script:

    /** * Path where files should be saved * Special Characters like spaces should be escaped with \ * If you want to modify the folder, use following form: * "/Driveletter/Foldername/../LastFolderName/" * Make sure not to forget the / before and after the location */

    var filepath = "/n/05_2Projekte/0000000715_2010_GAG_Dettingen_KIRU/07_web/pdf/";

    /** * Number of expose pages - feel free to change */

    var pageType = 8;

    /*** regular expression for search*/

    var idNumber = /08\d\d\d\d\-\d\d\d\-\d\d\d\d\d-\d\d\d-\d\d/g;

    /*** if possible this function extracts the searched number as string** @param rematch string which should be searched in document* @return null if rematch is not found or string if rematch is found*/

    function ExtractFromDocument(reMatch) { try { var Out = new Object(); for (var i = 0; i 1; i++) { numWords = this.getPageNumWords(i); var PageText = ""; for (var j = 0; j 30;j++) { var word = this.getPageNthWord(i,j,false); PageText += word; } var strMatches = PageText.match(reMatch); if (strMatches == null) continue; } return strMatches; } catch(e) { app.alert("Processing error: "+e) }}

    /*** tries to load given filename (extracted number)** @param filename string of file which should be checked* @param n number to iterate while checking for files* @return true if file exists or false if not*/

    function checkIfFileExists(filename, n) { var existingDoc = false; try { if( n == 0) { var checkDoc = app.openDoc(filepath+filename+"-000.pdf"); } else { var checkDoc = app.openDoc(filepath+filename+"-000_"+n+".pdf"); } checkDoc.closeDoc(); existingDoc = true; } catch (e) { } if( existingDoc == true ) { n = n+1; n = checkIfFileExists(filename, n); } return n;}

    var pageAmount = this.numPages;for( i=0; ipageAmount; i+pageType ) { var filename = ExtractFromDocument(idNumber); fileExistence = checkIfFileExists(filename, 0); if(fileExistence != 0) { this.extractPages({nEnd:(pageType-1), cPath : filepath+filename+"-000_"+fileExistence+".pdf"}); } else { this.extractPages({nEnd:(pageType-1), cPath : filepath+filename+"-000.pdf"}); } this.deletePages({nStart:0, nEnd: pageType-1});}

    thanks in advance :-)

    Michael

    DB:2.58:This.Getpagenthword And Background Image Problem d8


    I don't know, but the difference will not be more than a second or two. You

    can also stop the loop once you find what you need.

  • RELEVANCY SCORE 2.58

    DB:2.58:Virtual Machine Disks Consolidation Is Needed Y Unable To Access File Unspecified Filename Since It Is Locked 8k


    Hola a tod@s,

    Tras utilizar la aplicacin de backup "Virtual Data Protection 5.5" y no realizarse correctamente los snapshot de las VMs, me aparece un mensaje en la pestaa "Summary" indicando:
    Virtual machine disks consolidation is needed

    Buenomirando la documentacin oficial, existen varias soluciones, la primera es pulsar en la opcin SnapShot - Consolidate pero muestra el error:

    Unable to Access file unspecified filename since it is locked

    Cul sera el siguiente paso?

    - ESXi versin 5.1

    - VMs en produccin.

    Gracias por todo,

    Saludos.

    DB:2.58:Virtual Machine Disks Consolidation Is Needed Y Unable To Access File Unspecified Filename Since It Is Locked 8k


    Hi Guys,

    Can you help me explain this in English, i have the same problem. I try so many work around:

    create test snapshot and delete all,

    restart the management agent,

    move the VM to another host,

    restart the host but no luck

    i have the below error in the vmware.log

    I120: AIOGNRC: Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (40003) (0x2013).

    u-0| I120: AIOMGR: AIOMgr_OpenWithRetry: Descriptor file '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' locked (try 0)

    u-0| I120: AIOGNRC: Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (40003) (0x2013).

    u-0| I120: AIOMGR: AIOMgr_OpenWithRetry: Descriptor file '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' locked (try 1)

    u-0| I120: AIOGNRC: Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (40003) (0x2013).

    u-0| I120: AIOMGR: AIOMgr_OpenWithRetry: Descriptor file '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' locked (try 2)

    u-0| I120: AIOGNRC: Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (40003) (0x2013).

    u-0| I120: AIOMGR: AIOMgr_OpenWithRetry: Descriptor file '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' locked (try 3)

    u-0| I120: AIOGNRC: Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (40003) (0x2013).

    u-0| I120: AIOMGR: AIOMgr_OpenWithRetry: Descriptor file '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' locked (try 4)

    u-0| I120: AIOGNRC: Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (40003) (0x2013).

    u-0| I120: OBJLIB-FILEBE : FileBEOpen: can't open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk' : Failed to lock the file (2

    u-0| I120: DISKLIB-VMFS : "/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1-flat.vmdk" : failed to open (Failed to lock the file): ObjLib_

    u-0| I120: DISKLIB-LINK : "/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1.vmdk" : failed to open (Failed to lock the file).

    u-0| I120: DISKLIB-CHAIN : "/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1.vmdk" : failed to open (Failed to lock the file).

    u-0| I120: DISKLIB-LIB : Failed to open '/vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1.vmdk' with flags 0x20a Failed to lock the file

    u-0| I120: SNAPSHOT:Failed to open disk /vmfs/volumes/51cd4254-6aa8eb9e-9723-6c3be5ba1d08/mtcngnprdivr1/mtcngnprdivr1.vmdk : Failed to lock the file (16392)

    u-0| I120: DISKLIB-VMFS : "/vmf

    thanks in advance

  • RELEVANCY SCORE 2.57

    DB:2.57:Unable To Read .Xlsx File Into Access 2007 18


    Dim xlApp As Excel.Application
    Dim introw As Integer
    Dim intcol As Integer
    Dim intFldCntr As Integer
    Dim lastcol, lastrow As Integer
    dim xlsname as string

    XLSName= C:\mydata\PL.xlsx

    With xlApp
    .Workbooks.Open FileName:=XLSName
    .Sheets(1).Select
    lastrow = .ActiveSheet.UsedRange.Rows.Count
    lastcol = .ActiveSheet.UsedRange.Columns.Count
    End With

    The above code works fine for .xls file but not for .xlsx file. Please guide me.
    Thanks,
    Chirag Patel

    ckp

    DB:2.57:Unable To Read .Xlsx File Into Access 2007 18

    Hello,
    The following requires a OpenFileDialog, you select a file to get used rows and columns. As coded KSG_USE is defined under project settings, compile tab, Advanced compiler options, customer constants add KSG_USE. The path for initialpath will not be used
    but instead your My Documents folder. The sheet is hard coded to Sheet1$.
    Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
    Dim SelectStatement As String =
    ' Not used if not exists
    Dim InitialPath As String = C:\DotnetLand2010\Excel\GetUsedRowsAndColumns\bin\Debug
    OpenFileDialog1.Title = Please select a file to open
    OpenFileDialog1.FileName =
    If IO.Directory.Exists(InitialPath) Then
    OpenFileDialog1.InitialDirectory = InitialPath
    Else
    OpenFileDialog1.InitialDirectory = _
    System.Environment.GetFolderPath(Environment.SpecialFolder.MyDocuments)
    End If
    OpenFileDialog1.Filter = Excel 2007 (*.xlsx)|*.xlsx|Excel pre 2007|*.xls
    If OpenFileDialog1.ShowDialog = System.Windows.Forms.DialogResult.OK Then
    Dim xlApp As Excel.Application = Nothing
    Dim xlWorkBooks As Excel.Workbooks = Nothing
    Dim xlWorkBook As Excel.Workbook = Nothing
    Dim xlWorkSheet As Excel.Worksheet = Nothing
    xlApp = New Excel.Application
    xlApp.DisplayAlerts = False
    xlWorkBooks = xlApp.Workbooks
    xlWorkBook = xlWorkBooks.Open(OpenFileDialog1.FileName)
    xlApp.Visible = False
    xlWorkSheet = CType(xlWorkBook.Sheets(Sheet1), Excel.Worksheet)
    '
    ' To ensure proper object disposal I have used three range
    ' variables.
    '
    Dim UsedRange = xlWorkSheet.UsedRange
    Dim RowRange = UsedRange.Rows
    Dim ColRange = UsedRange.Columns
    SelectStatement = String.Format({0}$A1:{1}{2}, xlWorkSheet.Name, ColRange.Count.ExcelColumnName, RowRange.Count)
    Console.WriteLine(Sheet: {0} Rows used {1} Columns used {2} [{3}],
    xlWorkSheet.Name,
    RowRange.Count,
    ColRange.Count,
    String.Format({0}$A1:{1}{2}, xlWorkSheet.Name, ColRange.Count.ExcelColumnName, RowRange.Count)
    )
    xlWorkBook.Close()
    xlApp.UserControl = True
    xlApp.Quit()
    '
    ' Objects are released last to first
    '
    If Not ColRange Is Nothing Then
    Marshal.FinalReleaseComObject(ColRange)
    ColRange = Nothing
    End If
    If Not RowRange Is Nothing Then
    Marshal.FinalReleaseComObject(RowRange)
    RowRange = Nothing
    End If
    If Not UsedRange Is Nothing Then
    Marshal.FinalReleaseComObject(UsedRange)
    UsedRange = Nothing
    End If
    If Not xlWorkSheet Is Nothing Then
    Marshal.FinalReleaseComObject(xlWorkSheet)
    xlWorkSheet = Nothing
    End If
    If Not xlWorkBook Is Nothing Then
    Marshal.FinalReleaseComObject(xlWorkBook)
    xlWorkBook = Nothing
    End If
    If Not xlWorkBooks Is Nothing Then
    Marshal.FinalReleaseComObject(xlWorkBooks)
    xlWorkBooks = Nothing
    End If
    If Not xlApp Is Nothing Then
    Marshal.FinalReleaseComObject(xlApp)
    xlApp = Nothing
    End If
    #If KSG_USE Then
    GC.Collect()
    GC.WaitForPendingFinalizers()
    GC.Collect()
    GC.WaitForPendingFinalizers()
    #End If
    End If
    End Sub
    kevininstructor

  • RELEVANCY SCORE 2.56

    DB:2.56:Unable To Access A File Since It Is Locked f3


    When attempting to power on a VM I received the error " unable to access a file since it is locked" I believe the VM was shut down before the storage from the SAN was unassigned. Help Mr. Wizzard!:8}

    DB:2.56:Unable To Access A File Since It Is Locked f3

    As everyone is saying probably a hung process out there holding the log

    As was suggested look for a process running for the VM with the issue ( ps -efw | grep vm-name )

    www.phdvirtual.com, makers of esXpress

  • RELEVANCY SCORE 2.56

    DB:2.56:Unable To Print E-Mails Url Resreframe.Dllpreview.Js ff


    Original title: URL res//reframe.dll/preview.js
    Unable to print e-mails since I think I.E.9 has been installed? Error message reads Line 2053,Char 1 Error Unspecified then as above

    DB:2.56:Unable To Print E-Mails Url Resreframe.Dllpreview.Js ff

    Clare

    Did you try changinge the GPU Rendering.

    Start Internet Explorer 9. Click Internet Options on the Tools menu.
    Note If the Tools menu is not displayed, press ALT to display the
    Tools menu.

  • RELEVANCY SCORE 2.55

    DB:2.55:Unable To Access File Unspecified Filename During Consolidation x8



    One of our VM's on a ESXi 5.1 host is reporting that it needs to be consolidated. When we tell it to consolidate the snapshots it failes with the error "Unable to access file unspecified filename since it is locked". I have tried to create a new snapshot and delete all. I've tried to look up the locked file via SSH with no luck.

    The vmdk's do not live on the local host's HDD, they are on a networked SAN (if that makes a difference).

    Any suggestions would be greatly appreciated.

    DB:2.55:Unable To Access File Unspecified Filename During Consolidation x8


    Restarting the Mangement Services did the trick.

    Thank you very much!

  • RELEVANCY SCORE 2.55

    DB:2.55:Urgent: File Transfer To Sever dx



    Dear Guru,

    I have some question. I am writing a program to upload excel file from PC to SAP. I use abap function to get excel file from PC and store data in an internal table. I am then use function file transfer (open dataset and close dataset) to transfer that internal table to server as a text file. However, everything is going smoothly from a begining until the end. The message is displayed to me as file xxx has been transfered to sever xx. Unfortunately, when I access to sever, I cannot find that text file. Anything wrong with my coding? Please help me!! I will reward you. thank you very much.

    Best Regard

    This is my code.

    OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT MESSAGE MSG_TEXT.

    IF SY-SUBRC NE 0.
    WRITE: 'FILE CANNOT BE OPENED FOR REASON:', MSG_TEXT.
    ELSE.
    LOOP AT ITAB.
    TRANSFER ITAB-COL1 TO FILENAME.
    TRANSFER ITAB-COL2 TO FILENAME.
    TRANSFER ITAB-COL3 TO FILENAME.
    TRANSFER ITAB-COL4 TO FILENAME.
    TRANSFER ITAB-COL5 TO FILENAME.
    TRANSFER ITAB-COL6 TO FILENAME.
    TRANSFER ITAB-COL7 TO FILENAME.
    TRANSFER ITAB-COL8 TO FILENAME.
    TRANSFER ITAB-COL9 TO FILENAME.
    TRANSFER ITAB-COL10 TO FILENAME.
    TRANSFER ITAB-COL11 TO FILENAME.
    TRANSFER ITAB-COL12 TO FILENAME.
    TRANSFER ITAB-COL13 TO FILENAME.
    TRANSFER ITAB-COL14 TO FILENAME.
    ENDLOOP.
    MESSAGE I000(38) WITH FILENAME ':TRANSFERRED SUCCESSFULLY'.
    CLOSE DATASET FILENAME.
    ENDIF.

    DB:2.55:Urgent: File Transfer To Sever dx


    Hi ,

    Try this

    OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE .

    data : v_test(255).

    loop at it_1.

    it_2-matnr = it_1-matnr.

    it_2-labst = it_1-labst.

    concatenate it_2-matnr it_2-labst into v_test separated by '#'.

    TRANSFER v_test TO FILENAME.

    endloop.

    So now # will act as a delimiter for your data.

    Regards

    Arun

  • RELEVANCY SCORE 2.54

    DB:2.54:Unable To Power On Vm : Unable To Access File 1j



    Hi everyone !

    I have a VM that I unable to power on.

    The error I get in vSphere client is : "Unable to access file lt;unspecified filenamegt; since it is locked"

    I try "vm-support -X vmid", but nothing change

    I try this : http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKCdocType=kcexternalId=10051sliceId=1docTypeID=DT_KB_1_1dialogID=64798136stateId=0%200%2068413636

    Now, I know the name of the locked file and who lock it, but I'm unable to unlock it.

    This happen 3 or 4 times since the last 6 months. The only solution I found is rebooting the ESX host, but it's not a good solution

    DB:2.54:Unable To Power On Vm : Unable To Access File 1j


    I have update my ESX host.

    Since 3 month, I didn't get this trouble again.

  • RELEVANCY SCORE 2.54

    DB:2.54:Error On Snapshot (Unspecified Datastore) s7



    Hi,

    I have a VM there are two partition one is 250GB and another one is 256GB.

    I tried to make clone but it gives error operation failed also I tried to take sanpshot then it gives below error.

    "File unspecifi-ed filename is larger than the maximum size supported by datastore 'unspecifi-ed datastore"

    After the shutdown I tried to reduce size of second hard disk as 250GB but when I switched on VM it still showing 256GB and unable to take snapshot with same error.

    The second drive is D drive there is nothing but I am worry to delete this that might be effect on the operating system or application as this is Exchange Server.

    Kindly guide me what I have to do safely.

    NOTE: There is no any Raw Disk attched.

    Regards,

    Badr.


    DB:2.54:Error On Snapshot (Unspecified Datastore) s7


    Check the block size of your VMFS datastore. A 1MB block limits you to files of 256GB or smaller.

    Here are some KBs for further detail.

    Block size limitations of a VMFS datastore

    http://kb.vmware.com/kb/1003565

    Creating a snapshot for a virtual machine fails with the error: File is larger than maximum file size supported

    http://kb.vmware.com/kb/1012384

  • RELEVANCY SCORE 2.53

    DB:2.53:Problema Ao Consolidar Uma Vm (Problem Consolidate A Vm) mx



    Boa tarde a todos,

    (Hi,)

    Estou com um problema no VMWare em que eu no consigo consolidar uma VM. Ocorre a mensagem de "Unable to access file unspecified filename since it is locked":

    I have a problem in VMWare where I can not build a VM. Occurs the message "Unable to access file unspecified filename since it is locked":

    Pois bem, tentei consolidar a mquina de outra forma, que foi: fazer um snapshot da VM, remover esse snapshot e depois mover para outro DataStore. Ocorreu a mensagem de erro abaixo:

    Well, I tried to consolidate the machine otherwise, which was: take a snapshot of the VM, remove that snapshot and then move to another DataStore. The below error message occurred:

    Inclusive isso ocorreu depois que o Avamar estava fazendo um backup, mas houve uma queda na rede, e o processo de backup foi interrompido. O que eu posso fazer nesse caso ?

    Even that occurred after the Avamar was doing a backup, but there was a network outage, and the backup process was interrupted. What can I do in this case?

    Obrigado desde j,

    Thanks,

    DB:2.53:Problema Ao Consolidar Uma Vm (Problem Consolidate A Vm) mx


    Cara, muito bom saber que t tudo 100% agora.

    Obrigado e bom trabalho.

  • RELEVANCY SCORE 2.53

    DB:2.53:Unable To Create Favorites Unspecified Error In Ie8 After Upgrading To Windows 7 And Ie8 8x



    When Iupradedmylaptop (Vista Business, IE7) toWindows 7 Ultimate 64 bit, IE8, I copied my Favorites folder from IE7 into IE8. I can access those folders and the favorites in them just fine, but I cannot add a new favorite.I get the error message "Unable
    to create [shortcut name]: Unspecified Error."
    How do I fix this?

    DB:2.53:Unable To Create Favorites Unspecified Error In Ie8 After Upgrading To Windows 7 And Ie8 8x

    Unspecified error when adding a link to Favorites in Windows Vista and Windows 7
    http://www.winhelponline.com/blog/unspecified-error-when-adding-a-link-to-favorites-in-windows-vista/

    ~Robear Dyer (PA Bear) ~ MS MVP (IE, Mail, Security, Windows Update Services) since 2002 ~ Disclaimer: MS MVPs neither represent nor work for Microsoft

  • RELEVANCY SCORE 2.53

    DB:2.53:Unable To Delete The Snapshot ks



    Hi,

    We are using ESX 4, and have exchange server with one snapshot form last 6 months. Now i am trying to delete the snapshot but it is throwing the error

    Create virtual machine snapshot

    Remove all snapshotsExchangeServer-2003File unspecified filename is larger than the maximum size supported by datastore 'unspecified datastore

    After i checked the Snapshot manager, i didn't found any snapshots. But still the Virtual machine is running on snapshot only ( I confirmed by checking the Virtual harddisk ending with 0001.vdk

    Now what is the solution for deleting the snapshots?

    DB:2.53:Unable To Delete The Snapshot ks


    This issue occurs due to the size of the second virtual disk (500 GB) and the fact that snapshots in ESX 4 are created in the VM's base folder by default. I guess the second virtual disk was added to the VM at a time after the snapshot for the first disk already existed!? You could try to follow http://kb.vmware.com/kb/1002929 and set the workingdir to the folder on the 4MB block size datastore or - at least temporarily - remove "Hard Disk 2" from the VM (Caution: don't select "Delete from disk"!), then delete the snapshot and attach the second virtual disk after this again.

    Andr

  • RELEVANCY SCORE 2.53

    DB:2.53:Unable To Edit Properties For Music Files Unspecified Error 0x80004005 3s


    apply properties file unspecified error 0x80004005
    For some reason, I'm unable to edit information on my music files. I used to do this before quite easily. I get this error. Any help?

    DB:2.53:Unable To Edit Properties For Music Files Unspecified Error 0x80004005 3s

    In that case, I suggest that you perform a repair install of Windows 7, seehttp://www.sevenforums.com/tutorials/3413-repair-install.html

    Tim De Baets
    http://www.bm-productions.tk

  • RELEVANCY SCORE 2.51

    DB:2.51:Mime-Types Icons In Java Code sc



    Hi all,

    I use a custom developed iView for viewing a list of KM documents.

    I now need to add an icon next to each document according to its mime-type.

    I want to use the table in System Administration - System Configuration - Knowledge Management - Content Management - Utilities - Icons.

    Since I couldn't find a way to access it, I "copied" it to my code:
    private String getIconPath(IResource r){
    String filename = "unknown.gif";
    try{
    String mimeType = r.getContent().getContentType();
    if (mimeType.equalsIgnoreCase("application/msword")){
    filename = "document.gif";
    }
    else if (mimeType.equalsIgnoreCase("application/pdf")){
    filename = "pdf.gif";
    }
    else if (mimeType.equalsIgnoreCase("application/vnd.ms-excel")){
    filename = "spreadsheet.gif";
    }
    else if (mimeType.equalsIgnoreCase("application/vnd.ms-powerpoint")){
    filename = "presentation.gif";
    }
    else if (mimeType.equalsIgnoreCase("application/vnd.visio")){
    filename = "vectorgraphics.gif";
    }
    else if (mimeType.equalsIgnoreCase("application/vnd.wcm-folder")){
    filename = "standard_folder.gif";
    }
    else if (mimeType.equalsIgnoreCase("application/vnd.wcm-weblink")){
    filename = "html_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("audio/basic")){
    filename = "audio.gif";
    }
    else if (mimeType.equalsIgnoreCase("audio/midi")){
    filename = "audio.gif";
    }
    else if (mimeType.equalsIgnoreCase("audio/mpeg")){
    filename = "audio.gif";
    }
    else if (mimeType.equalsIgnoreCase("audio/x_mpeg")){
    filename = "audio.gif";
    }
    else if (mimeType.equalsIgnoreCase("image/")){
    filename = "image.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/msword")){
    filename = "document_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/octet-stream")){
    filename = "unknown_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/pdf")){
    filename = "pdf_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/vnd.ms-excel")){
    filename = "spreadsheet_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/vnd.ms-powerpoint")){
    filename = "presentation_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/vnd.visio")){
    filename = "vectorgraphics_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.application/vnd.wcm-folder")){
    filename = "standard_folder_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.audio/basic")){
    filename = "audio_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.audio/midi")){
    filename = "audio_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.audio/mpeg")){
    filename = "audio_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.audio/x_mpeg")){
    filename = "audio_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.default")){
    filename = "unknown_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.image/")){
    filename = "image_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.text/html")){
    filename = "html_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.text/plain")){
    filename = "plaintext_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.text/xml")){
    filename = "xml_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("link.video/vdo")){
    filename = "video_link.gif";
    }
    else if (mimeType.equalsIgnoreCase("sap-crt/state-error")){
    filename = "s_s_ledr.gif";
    }
    else if (mimeType.equalsIgnoreCase("sap-crt/state-not-init")){
    filename = "s_s_ledi.gif";
    }
    else if (mimeType.equalsIgnoreCase("sap-crt/state-ok")){
    filename = "s_s_ledg.gif";
    }
    else if (mimeType.equalsIgnoreCase("sap-crt/state-warn")){
    filename = "s_s_ledy.gif";
    }
    else if (mimeType.equalsIgnoreCase("text/html")){
    filename = "html.gif";
    }
    else if (mimeType.equalsIgnoreCase("text/plain")){
    filename = "plaintext.gif";
    }
    else if (mimeType.equalsIgnoreCase("text/xml")){
    filename = "xml.gif";
    }
    else if (mimeType.equalsIgnoreCase("video/vdo")){
    filename = "video.gif";
    }
    } catch (Exception e){
    e.printStackTrace();
    }

    try {
    IURLGeneratorService urlgen = (IURLGeneratorService)ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.URLGENERATOR_SERVICE);
    return urlgen.getImageUri(filename).toString();
    } catch (Exception e) {
    e.printStackTrace();
    return "";
    }
    }

  • RELEVANCY SCORE 2.51

    DB:2.51:Unable To Rename Temporary File During Office 2010 Download 7j


    I'm using Windows 7. I have a subscription for an Office 2010 download. When I transfer the files, the transfer hangs up with the following error message: Unable to rename temporary file to permanent filename. Check access permissions and resume the transfer
    again. Help!

    DB:2.51:Unable To Rename Temporary File During Office 2010 Download 7j

    Hi,
    See here:
    http://social.answers.microsoft.com/Forums/en-US/officeinstall/thread/e652cf1a-83ba-4172-b8b8-3af25642a960#656bae5e-d5c9-4037-9396-5092339153c7
    http://social.technet.microsoft.com/Forums/en-US/officevolact/thread/0b567a60-0a44-4e2d-9f68-4eeb0d3303ca
    Hope it helps.

  • RELEVANCY SCORE 2.51

    DB:2.51:Unable To Delete Files In Windows. jp


    When I try to delete a file, any file or any URL in my favorites, I get the message "Cannot delete filename: Access denied. The source file may be in use.I am not doing anything with image files. I can delete the files in DOS

  • RELEVANCY SCORE 2.51

    DB:2.51:Ha Didnt Work Only For 2 Vm's f9



    Hi,

    we had 20 VM's on a host which was working fine, due to hardware issue host got hung , VM's moved to other host. Only two VM's didnt move we had to manually move those VM's to other hosts.

    When we checked error we got this "Failover unsuccessful for VM on host cluster Reason: Unable to access file unspecified filename since it is locked."

    Please let me know why only two VM's got struct and rest moved to other host.

    I did verify settings of VM's which moved and which didnt , only difference i found was VMware tool was not updated in the VM's which didnt move.

    Vinay

    DB:2.51:Ha Didnt Work Only For 2 Vm's f9


    vinaytp wrote:

    I got your point , but why only these two VM's files were struck

    I don't know based on this info, too little to go on. But for most of us it is difficult to troubleshoot these kind of problems anyway as it probably comes down to 1 log entry in a 50k entry log file. So if you really really want to know you could contact support.

  • RELEVANCY SCORE 2.51

    DB:2.51:Unable To Run .Exe Files Error Unspecified Error 3a


    Original title: can't run .exe file

    i cannot run directly .exe file application after completing download from internet explorer 9.when i click run,it shows unspecified error.but if it is done save and run then it works.my windows is 7 and using AVG antivirus.any suggestion,how i could fix
    the problem?

    DB:2.51:Unable To Run .Exe Files Error Unspecified Error 3a

    Hi,

    I would suggest you to run the fixit given in the following link to check if the issue reoccurs.
    http://support.microsoft.com/kb/950505/

    Reply the outcome.

    Thanks!

  • RELEVANCY SCORE 2.51

    DB:2.51:Can't Power On Vm zk



    I'm unable to power on a virtual machine. At first I received this error:

    File unspecified filename was not found

    Then I tried moving to a different snapshot and received another error:

    An error occurred while communicating with the remote host

    It never did move to another snapshot - but the ESX host itself immediately disconnected. I reconnected it. Now when I try to power on the VM again I get another error:

    Host CPU is incompatible with the virtual machine's requirements at CPUID level 0x1 register 'ecx'. Host bits: 0000:0000:1001:1000:0010:0010:0000:0001 Required: x000:0x0x:00x0:1xx0:xx10:xx1x:xxxx:xx01 Mismatch detected for these features: * SSE4.2; refer to KB article 1993 for a possible solution.

    DB:2.51:Can't Power On Vm zk


    Hi ,

    I think you need to restart HOST . ( Cant power on VM registered host )

    Before reboot the host please migrate resource from one host to another host ..

    Thanks Regards,

    BSR Krishna

  • RELEVANCY SCORE 2.50

    DB:2.50:Vmware Esx Host Keeps Locking Vm File sp



    We are having a repeated issue with our VMWare View desktop environment on ESX4.

    One ESX Host with about 5-6 VM's in it (It's our POC before we move the rest of them over).

    Sometimes we are getting VMs freezing on the host. When we try to restart them we get an error saying:

    "Unable to access file - unspecified filename - since it is locked"

    This is after we try to power them back up. Powering them down often is involving us having to do a kill -9 on the affected VM.

    Following the VMWare KB articles, we can verify this ESX host is the one with the lock. We do have other ESX hosts accessing the same SAN LUNS (our old Sun global desktop ESX Hosts which still have VMs on them), but we have migrated VMs from the Sun Hosts to these without a problem. We know the SUN hosts aren't affecting this since the lock is specifed as being on the ESX Host which we want the lock to be on.

    The only way to get the VM back up is to actually restart the ESX host.

    Please can someone help? The only thing we have found so far is that possibly the same LUN (10) is causing the problem. The 2 VMs that locked up in this way have both been on LUN 10. Everything however checks out on this LUN and the previous ESX farm 3.5 which is still using LUN 10 is not having the VMs freeze like this.

    Any advice is greatly appreciated.

    DB:2.50:Vmware Esx Host Keeps Locking Vm File sp


    Same problem today even after the Host Update to the latest build.

    We haven't had the locking issue again but we are still getting VMs freezing and having to be reset from vCenter.

  • RELEVANCY SCORE 2.50

    DB:2.50:Error Message After Sync x3



    Hi.

    Every time I make a sync, I get this annoying message, here you can see the log.

    How can I fix it?

    Thanks in advance for your help.

    On 30/01/2010 17.55Synchronize BlackBerry Connect Blocco note with Microsoft Outlook NoteFirst System: BlackBerry ConnectSecond System: Microsoft OutlookSecond System File Name: Blocco noteConflict Resolution: NotifyInput From First System: READ "Dj Le Roy Get Ready"Total Inputs From First System: 1Input From Second System: READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified"Total Inputs From Second System: 21

    DB:2.50:Error Message After Sync x3


    Hi.

    Every time I make a sync, I get this annoying message, here you can see the log.

    How can I fix it?

    Thanks in advance for your help.

    On 30/01/2010 17.55Synchronize BlackBerry Connect Blocco note with Microsoft Outlook NoteFirst System: BlackBerry ConnectSecond System: Microsoft OutlookSecond System File Name: Blocco noteConflict Resolution: NotifyInput From First System: READ "Dj Le Roy Get Ready"Total Inputs From First System: 1Input From Second System: READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified"Total Inputs From Second System: 21

  • RELEVANCY SCORE 2.50

    DB:2.50:Favorites jk


    Since installing Vista, I cannot add any sites to my favorites. I get a unable to create and unspecified error message.

    DB:2.50:Favorites jk

    Hi,

    see if this Blog post helps:
    http://www.winhelponline.com/blog/unspecified-error-when-adding-a-link-to-favorites-in-windows-vista/

    Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience Security - Since 2003. ~ My Blog: http://blogs.dotnethell.it/vincent/

  • RELEVANCY SCORE 2.50

    DB:2.50:Re: Cannot Open Database Error x3


    In Autocad Architecture 2008 when I click on the drop down menu on the left side of the screen, select Detailing, and then click on one of the categories such as Metals I get an error saying 'Cannot open database C:\Document and Settings\All Users\Application Data\Autodesk\ACD-A 2008\enu\Details\Details(US)\AecDtlComponents (US).mdb'. I then click ok and another error pops ups saying 'Unable to execute the tool. Unspecified error'. I navigated to the file thru Windows Explorer and was only able to open it when I set the Macro security level in Access 2003 to the lowest setting. I am now able to open the database file in Access or by clicking on the file but I am still unable to open it in AutoCad Architecture.

    DB:2.50:Re: Cannot Open Database Error x3

    We are also getting the database error. What corrects it is uninstalling and reinstalling .NET Framework 2.0, even if it the same version that AutoCAD wants when you install the product.

    We use System Center Configuration Manager do deploy Images and software pacages. In our wim image we have .NET framework 2.0 v2.0.50727 (the version AutoCAD 2008 needs) but after install AutoCAD and try to open the database we get that error not able to open until we uninstall and reinstall framework.

    Is there some way to get this product to see that the version of framework it wants is already install or do we change the wim image not to have framework 2.0 installed so this dumb product can install it for itself. oh by the way AutoCAD 2006 database also don't work unless you change the config file to use only Framework 1.1.

    Is there anyone who work in autodesk land have a fix for this?????

  • RELEVANCY SCORE 2.50

    DB:2.50:Oledb Connection Reopen Failed After Mdb File Compacted(System.Data.Oledb.Oledbexception (0x80004005): Unspecified Error) z7


    It is winform program, using access 2003 format database for recording state of equipment , the program will automatically compact the database to
    improve performance by referencing Microsoft Jet and Replication Objects 2.6 library COM.
    the program starts, it is normal operation for some time, the running for some time program compacted database normally, program throws an error some times that isSystem.Data.OleDb.OleDbException (0x80004005): Unspecified error. when the
    program reopen connection to database, then my program can not access database unless the re-start the program. the program can run normally for some time after restarting, then the problems repeated mentioned above.
    I have no idea for cause of the problem, the program run on different machines(with winXP or win7) to get the same phenomenon. I also checked on the Internet, but the solutions are all for asp.net, and not addressed windform's. About the temporary folder
    and startup directory permissions issue I have tried, it's useless.
    Kindly advise,thanks.
    Here is my code after simplification:
    Imports System.Data.OleDb
    Imports System.Data.Common
    Imports System.Data
    Imports System.IO
    Public Class Form1
    Public WithEvents m_Timer As New System.Windows.Forms.Timer
    Public isDoingFlag As Boolean
    Private m_conn As OleDbConnection = Nothing
    Private m_cmd As OleDbCommand = Nothing
    Private filename As String = Application.StartupPath.TrimEnd(\.ToCharArray()) \PSD Monitor.mdb
    Private strTmpFile As String = Application.StartupPath.TrimEnd(\.ToCharArray()) \tmpPSD Monitor.mdb
    Private ConnectionString As String = Provider=Microsoft.Jet.OLEDB.4.0;Data Source= filename ;Jet OLEDB:Database Password=mysql ';OLE DB Services = -4
    Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
    m_conn = New OleDbConnection(ConnectionString)
    m_cmd = m_conn.CreateCommand()
    m_cmd.CommandType = CommandType.Text
    m_Timer.Interval = 10
    m_Timer.Start()
    End Sub
    Private Sub Form1_FormClosing(sender As System.Object, e As System.Windows.Forms.FormClosingEventArgs) Handles MyBase.FormClosing
    If m_Timer IsNot Nothing Then
    m_Timer.Stop()
    m_Timer.Dispose()
    m_Timer = Nothing
    End If
    End Sub
    Private Sub m_Timer_Tick(sender As Object, e As System.EventArgs) Handles m_Timer.Tick
    m_Timer.Stop()
    If isDoingFlag Then Exit Sub
    isDoingFlag = True
    Dim InsertCount As Integer = 0
    Try
    Debug.WriteLine(begin to insert 50 times...)
    m_conn.Open()
    Do
    InsertCount = 1
    If InsertCount = 50 Then Exit Do
    If m_conn IsNot Nothing Then
    m_cmd.CommandText = insert into t_StateLog ([DeviceCode],[StateID],[StateData],[TriggerTime]) values ('ST',0,True,'2013-08-17 11:17:23.901')
    m_cmd.ExecuteNonQuery()
    Application.DoEvents()
    End If
    Loop
    Debug.WriteLine(50 times inserted operation finished )
    m_conn.Close()
    Compact_DB(filename)
    Debug.WriteLine(begin to insert 100 times...)
    InsertCount = 0
    m_conn.Open() '----Error raised some times。
    Do
    InsertCount = 1
    If InsertCount = 100 Then Exit Do
    If m_conn IsNot Nothing Then
    m_cmd.CommandText = insert into t_StateLog ([DeviceCode],[StateID],[StateData],[TriggerTime]) values ('ST',0,False,'2013-08-16 09:50:31.894')
    m_cmd.ExecuteNonQuery()
    Application.DoEvents()
    End If
    Loop
    Debug.WriteLine(50 times inserted operation finished vbCrLf)
    Catch ex As Exception
    Debug.WriteLine(ex.ToString())
    Finally
    If m_conn IsNot Nothing Then m_conn.Close()
    isDoingFlag = False
    If m_Timer IsNot Nothing Then m_Timer.Start()
    End Try
    End Sub
    Private Function Compact_DB(ByVal filename As String) As Boolean
    Try
    If System.IO.File.Exists(strTmpFile) Then System.IO.File.Delete(strTmpFile)
    Debug.WriteLine(Compacting...)
    Dim Jet_Engine As JRO.JetEngine = New JRO.JetEngine()
    Jet_Engine.CompactDatabase(Provider=Microsoft.Jet.OLEDB.4.0;Data Source= filename ;Jet OLEDB:Database Password=mysql, _
    Provider=Microsoft.Jet.OLEDB.4.0;Data
    Source= strTmpFile ;Jet OLEDB:Database Password=mysql;Jet OLEDB:Engine Type=5)
    Jet_Engine = Nothing
    System.IO.File.Delete(filename)
    System.IO.File.Move(strTmpFile, filename)
    Debug.WriteLine(Compacted)
    Return True
    Catch ex As Exception
    Return False
    End Try
    End Function
    End Class
    Following is error information:
    System.Data.OleDb.OleDbException occurred
    ErrorCode=-2147467259
    Message=unspecified error
    Source=Microsoft JET Database Engine
    StackTrace:
    at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
    at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
    at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
    at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
    at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
    at System.Data.OleDb.OleDbConnection.Open()
    at WindowsApplication1.Form1.m_Timer_Tick(Object sender, EventArgs e) in C:\WindowsApplication1\WindowsApplication1\Form1.vb:line 68
    InnerException:

    DB:2.50:Oledb Connection Reopen Failed After Mdb File Compacted(System.Data.Oledb.Oledbexception (0x80004005): Unspecified Error) z7

    Hi,
    All I did was modify the web config identity impersonate tag.
    identity impersonate=false /
    /system.web
    I had the same issue, but it seemed to be a simple fix after hours and hours of endless chasing the cryptic error stack. I am running 64 bit, windows 2008, IIS7 and access.mdb and this was the fix that worked for my situation.
    Hope this helps others with the same error.

  • RELEVANCY SCORE 2.50

    DB:2.50:Unable To Access File Unspecified Filename Since It Is Locked? ja



    How do I 'unlock' the file?

    This is happening when I try to boot up a server I just cloned/created.

    Oscar

    DB:2.50:Unable To Access File Unspecified Filename Since It Is Locked? ja


    On the service console browse to the data store where the VM is loacted and look for the file with .LCK extension and delete it, VM should boot up fine after that.

    Regards,

    Vijay

  • RELEVANCY SCORE 2.49

    DB:2.49:Hidden/Stuck Snapshots z9



    We have some VMs that are in snapshot mode (they are writing to 00000x vmdk files). However ViCenter doesn't show any snapshots via SnapShot Manager.

    I've done some searching and found lots of people having similar problems. It appears to happen when various backup products put the VM in snapshot mode, but it fails to clean up at the end.

    In particular I decided to follow this article: http://4sysops.com/archives/vmware-backups-troubleshoot-the-consolidate-helper-0-backup-error/

    However none of those tricks work. In particular:

    -I tried shutting the VM down, creating a new snapshot. Then SnapShot Manager did indeed show two snapshots, my new one, and the old/stuck one called "Consolidate Helper- 0". But when I tried delete all, I got the error "Unable to access file unspecified filename since it is locked".

    -I tried migrating the VM (host and datastore). No luck

    The only option I haven't tried yet is the vmware converter. Holding that out as a last resort. Just wanted to see if anyone had any new alternatives to try?

    Thanks,

    Shane

    DB:2.49:Hidden/Stuck Snapshots z9


    Hi Shane

    May be worth doing a lower level search for that lock as migrating VMs between hosts does not always clear it.

    The following http://kb.vmware.com/kb/10051 has helped in the past for me when i have come up against some nasty locked files. I have also seen in the past snapshots that are extremely big take ages 2h + to commit and the task times out snapshot manager shows nothing but its still chugging in the background etc.. How big is the snapshot file?

  • RELEVANCY SCORE 2.49

    DB:2.49:Silverlight File Upload Security Issue mf


    HI
    i am trying to upload multiple files in silver light, in that i am unable to fetch all the file information using FileInfo
    class.

    i am able to fetech FileName and FileStream but not DirectoryName and other properties from FileInfo class.
    while i am reading other propertied it throws Security Exception File operation not permitted. Access to path is denied. please find attachment for reference.

    thanks,
    Samee.

    DB:2.49:Silverlight File Upload Security Issue mf

    Make Silverlight an Out of Browser application. Then the user should Right Click and Install this application. otherwise, you are out of luck.

  • RELEVANCY SCORE 2.49

    DB:2.49:Unable To Write To Output File (Project Path)\Obj\Debug\(File).Pbd: Unspecified Error ca


    My web project will compile properly in Release mode, but when I
    compile in Debug mode, I get the following, not-very-helpful error
    message...

    Unable to write to output file '(project path)\obj\Debug\(file).pbd': Unspecified error

    (I've replaced my actual file name with the text in parenthesis)

    The file DOES appear in the file system, and I am able to manually
    delete it, just to rule out some type file-lock issue. Also deleted
    entire Debug directory, to no avail.

    Any ideas?

    DB:2.49:Unable To Write To Output File (Project Path)\Obj\Debug\(File).Pbd: Unspecified Error ca

    I had the same error, I had a dataset with a .vb file that could not be found. I deleted the file from the project (it didn't exist anyway), and this error went away.

  • RELEVANCY SCORE 2.48

    DB:2.48:Cannot Power On Virtual Machine: Unable To Access File Unspecified Filename Since It Is Locked z3



    I'm having this trouble (this is the second time now) where I cannot power on a virtual machine. The message "Unable to access file since it is locked. Since the filename is unspecified, it makes it hard to figure out what the issue is.

    I have 3 ESX4 hosts in a cluster. I moved everything off of host 2 to host 1 (except the affected machine), and then reboot host 2. Upon power up the VM still will not start. It gets to 95% and then that specified error message displays.

    What I originally tried to do is resize the disk of the particular machine. I wasn't able to since it was thick provisioned, so I used the vmware converter and moved it to host 3 with a new name. Well when the converter finished I could not start either of the VM's (the original, or the one with the slightly smaller disk). So I thought the new converted machine was causing the issues, so I deleted it. Well now I can't even power on the original.

    This isn't the first time this happened. After a using vmware converter to get a P2V done a few days ago, I couldn't start up the new imported virtual machine. I forget what we rebooted and in what order it was done. Don't rememver if it was the vcenter server that we rebooted, or if it was the affected host.

    Thanks for the suggestions. It seems as if this "locked" file is the Achilles heel of our VMWare implementation. If only there was a way to handle files so they wouldn't arbitrarily lock. Although that's a discussion in another computing topic.

    Thanks!

    DB:2.48:Cannot Power On Virtual Machine: Unable To Access File Unspecified Filename Since It Is Locked z3


    Hi there, I had the same issue action below fixed my issue. Good luck

    VMWARE: Unable to access file since it is locked

  • RELEVANCY SCORE 2.48

    DB:2.48:Unable To Access Files With Spaces In The Path 1x


    Hi all, I am accessing files which reside on the server using a java applet.

    The typical path of a file could be:

    http://192.168.0.2/agat/data/AF190701 0003.agt

    (not the space in the filename).

    When I try to open this file using a URL object:

    URL file = new URL(filename);
    BufferedReader in = new BufferedReader(new InputStreamReader(file.openStream()));

    I get exception 400 ( I think) whihc I assume is file cant be found.

    However when I rename the file (to get rid of that space) and also change the filename variable to suit. The file is opened as expected.

    What should I do to make the applet able to open paths with spaces? Or is this just not possible.

    I did try including quotes with the special characte precessor:

    filename = "/"http://192.168.0.2/agat/data/AF190701 0003.agt/""

    But this didnt work either, please could someone tell what I need.

    Thanks.

    DB:2.48:Unable To Access Files With Spaces In The Path 1x

    Thanks guys, although before I got your replies I did the following - it seems to work, but shall try your suggestions.

    while (file.lastIndexOf(" ") 0)
    {
    String temp;
    int num = file.lastIndexOf(" ");
    temp = file.substring(0, num) + "%20" + file.substring(num+1, file.length());
    file = temp;
    }

  • RELEVANCY SCORE 2.48

    DB:2.48:Sync Error Message dx



    Dear all,

    whenever I synchronize my BB Storm 2 via wire (WinXP/Outlook2003), shortly before the end of the synchronization, there pops-up a window including an error message. Who has an idea, how I can solve the problem?

    Below you find the error message as well as the protocols text... since my BB Desktop Manager is working in German, I will have to translate it:

    The header is "Intellisync".

    Text:

    "Some entries were not valid during the installation. The following 1 entry has been skiped:

    Address book: Handheld - 0, Microsoft Outlook - 1

    Would you like to see further information of the synchronization protocoll?"

    Buttons: "Yes" and "no".

    I do not really find a hint in the protocoll (already in English):

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -On 04.12.2010 23:36Synchronize Handheld Notizen with Microsoft Outlook AnmerkungenFirst System: HandheldSecond System: Microsoft OutlookSecond System File Name: NotizenConflict Resolution: Handheld WinsGerätedatenquelle: ""Input From First System:Total Inputs From First System: 0Input From Second System: READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified"Total Inputs From Second System: 11- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Summary of Data Analysis: Dogbark - Unchanged on Both Systems Fax 01212 - Unchanged on Both Systems Aufnahme1 - Unchanged on Both Systems EpsonStylus C86 - Unchanged on Both Systems Notiz1 - Unchanged on Both Systems Anrufe\Schmitt, Sandra - Unchanged on Both Systems Anrufe\Schmitt, Sandra (2) - Unchanged on Both Systems Simons cat - Unchanged on Both Systems Mp3 - Unchanged on Both Systems Buchwunsch - Unchanged on Both Systems Xmäß Sandra - Unchanged on Both SystemsRecords Added or Changed - Conflicting: 0Records Added - Not Conflicting: 0Records Changed - Not Conflicting: 0Records Deleted: 0Records Unchanged: 11- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Updates To First System:Total Updates To First System: 0Updates To Second System:Total Updates To Second System: 0Field mapping used for translation: Handheld Microsoft Outlook Anmerkung - Titel --------------- Betreff Anmerkung - Text ---------------- Text Kategorien ---------------------- KategorienTranslation successful.

    Any idea?

    Best

    Retiarius

    DB:2.48:Sync Error Message dx


    Dear all,

    whenever I synchronize my BB Storm 2 via wire (WinXP/Outlook2003), shortly before the end of the synchronization, there pops-up a window including an error message. Who has an idea, how I can solve the problem?

    Below you find the error message as well as the protocols text... since my BB Desktop Manager is working in German, I will have to translate it:

    The header is "Intellisync".

    Text:

    "Some entries were not valid during the installation. The following 1 entry has been skiped:

    Address book: Handheld - 0, Microsoft Outlook - 1

    Would you like to see further information of the synchronization protocoll?"

    Buttons: "Yes" and "no".

    I do not really find a hint in the protocoll (already in English):

    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -On 04.12.2010 23:36Synchronize Handheld Notizen with Microsoft Outlook AnmerkungenFirst System: HandheldSecond System: Microsoft OutlookSecond System File Name: NotizenConflict Resolution: Handheld WinsGerätedatenquelle: ""Input From First System:Total Inputs From First System: 0Input From Second System: READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified" READ "Unspecified"Total Inputs From Second System: 11- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Summary of Data Analysis: Dogbark - Unchanged on Both Systems Fax 01212 - Unchanged on Both Systems Aufnahme1 - Unchanged on Both Systems EpsonStylus C86 - Unchanged on Both Systems Notiz1 - Unchanged on Both Systems Anrufe\Schmitt, Sandra - Unchanged on Both Systems Anrufe\Schmitt, Sandra (2) - Unchanged on Both Systems Simons cat - Unchanged on Both Systems Mp3 - Unchanged on Both Systems Buchwunsch - Unchanged on Both Systems Xmäß Sandra - Unchanged on Both SystemsRecords Added or Changed - Conflicting: 0Records Added - Not Conflicting: 0Records Changed - Not Conflicting: 0Records Deleted: 0Records Unchanged: 11- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Updates To First System:Total Updates To First System: 0Updates To Second System:Total Updates To Second System: 0Field mapping used for translation: Handheld Microsoft Outlook Anmerkung - Titel --------------- Betreff Anmerkung - Text ---------------- Text Kategorien ---------------------- KategorienTranslation successful.

    Any idea?

    Best

    Retiarius

  • RELEVANCY SCORE 2.48

    DB:2.48:Can Not Create Snapshot 19



    Hi,

    When I try and create a snapshot using vSphere client I get an error "File unspecified filename was not found."

    Can anyone please suggest where I can I get some more detali on the error or what my problem might be?

    On the host I am running VMware ESXi, 5.0.0, 623860.

    I have disk space avaiable and other snapshots work on other guests.

    Thanks in advance,

    Ashley

    DB:2.48:Can Not Create Snapshot 19


    I would suggest to download vmware.log file from VM directory and search for more information.

    Also review .vmsd .vmx files to gather more details.

  • RELEVANCY SCORE 2.48

    DB:2.48:After Saving Excel 2010 File, Only Backup Is Shown In Folder. ap


    Windows 7. Excel 2010. After I save a file and close it out, I am unable to locate the file. If I attempt to save the backup file as the filename, I am informed the file exists. This has been happening since I installed. Help, please.

  • RELEVANCY SCORE 2.48

    DB:2.48:Cannot Snapshot Virtual Machine fp



    When I try to create a snapshot i recieve the following error:

    Create virtual machine snapshot *server* File unspecified filename is larger than the maximum size supported by datastore 'unspecified datastore

    This is the configuration of the virtual machine:

    8 vCPU

    48GB RAM

    40GB Virtual Disk (OS)

    20GB Virtual Disk (Data)

    60GB Virtual Disk (Data)

    60GB Virtual Disk (Data)

    200GB Virtual Disk (Data)

    1,99TB Virtual Disk (Data)

    1,5TB Virtual Disk (Data)

    VMFS volume version 3.46 with blocksize 8MB

    total size 4,37TB

    DB:2.48:Cannot Snapshot Virtual Machine fp


    The limit is 2048GB -16GB = 2032GB, and the biggest volume is 1,99TB = 2037GB *GRR*

    I didn't calculate the overhead, that's the problem. I will set the volumes to max 1,95TB.

  • RELEVANCY SCORE 2.48

    DB:2.48:Error Unable To Create File Name Unspecified Error When Tried To Add Favorite 11


    Original title: Internet Explorer 7 Favorites Folder Problem
    I recently upgraded my PC and I am now running Windows 7 and IE 7 (old system was Window XP and older version of Explorer).All my files were transfered via an external drive to the new system. I now find that I get the following error message {"Unable
    to create 'file name' " Unspecified error} when I try to add a newfavorite to a folder that I brought forward from the old system. If I save the new favorite to a folder that was created on the new PC there is no problem. Short of doing it manually, is there
    a quick fix to this? I have a lot of favorite folders.

    DB:2.48:Error Unable To Create File Name Unspecified Error When Tried To Add Favorite 11

    Hi retired_cga,
    The default version of Internet Explorer (IE) in Windows 7 is IE 8. We recommend you to cross check if the version is correct.
    Try these steps and check the result.
    Step 1: Restore Favorites folder to default
    a. Click Start, type %userprofile% and hit enter.
    b. Right click Favorites icon, click Properties.
    c. Click the Location tab.
    d. Click Restore Default button and click OK.
    e. Check if the issue persists.
    Step 2: Run sfc (system file checker) scan to see if any system file is missing or corrupt. To do this, try these steps:
    a. Visit http://support.microsoft.com/kb/929833
    b. Run the scan successfully and check the result.
    Visit our
    Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.48

    DB:2.48:"Run Program In Guest" Vco Workflow Throws "File Unspecified Filename Was Not Found" Error In Vco Connected To Vcd 5.1 fj



    I am trying to execute a vbs script on a windows machine using "Run program in guest" VCO Flow. I am using the Program path input only and placed the script under c drive for ease of testing , and trying to run a vmware script for testing as follows. I receive a VCO Flow error File unspecified filename was not found. What is wrong with the inputs.

    Flowname : Library/vCenter/Guest operations/Processes/Run program in guest

    Inputs :

    programPath c:\cscript.exe vm-support.vbs

    arguments

    workingDirectory

    environment not set

    interactivesession No

    Output : File unspecified filename was not found

    Thanks,

    MuruRam

    DB:2.48:"Run Program In Guest" Vco Workflow Throws "File Unspecified Filename Was Not Found" Error In Vco Connected To Vcd 5.1 fj


    In addition to Joerg's comment; if your program path is being input by a user, then you "may" need to use a double backslash:

    c:\\cscript.exe

    BTW, is cscript.exe really in the root of c:? That command is generally in the Windows PATH so you shouldn't need to specify the path in your command. If you specify c:\cscript.exe , then that forces windows to look ONLY in the C:\ folder, not where the command is really found.

  • RELEVANCY SCORE 2.48

    DB:2.48:Oledb Connection Reopen Failed After Mdb File Compacted(System.Data.Oledb.Oledbexception (0x80004005): Unspecified Error) pm


    It is winform program, using access 2003 format database for recording state of equipment , the program will automatically compact the database to
    improve performance by referencing Microsoft Jet and Replication Objects 2.6 library COM.
    the program starts, it is normal operation for some time, the running for some time program compacted database normally, program throws an error some times that isSystem.Data.OleDb.OleDbException (0x80004005): Unspecified error. when the
    program reopen connection to database, then my program can not access database unless the re-start the program. the program can run normally for some time after restarting, then the problems repeated mentioned above.
    I have no idea for cause of the problem, the program run on different machines(with winXP or win7) to get the same phenomenon. I also checked on the Internet, but the solutions are all for asp.net, and not addressed windform's. About the temporary folder
    and startup directory permissions issue I have tried, it's useless.
    Kindly advise,thanks.
    Here is my code after simplification:
    Imports System.Data.OleDb
    Imports System.Data.Common
    Imports System.Data
    Imports System.IO
    Public Class Form1
    Public WithEvents m_Timer As New System.Windows.Forms.Timer
    Public isDoingFlag As Boolean
    Private m_conn As OleDbConnection = Nothing
    Private m_cmd As OleDbCommand = Nothing
    Private filename As String = Application.StartupPath.TrimEnd(\.ToCharArray()) \PSD Monitor.mdb
    Private strTmpFile As String = Application.StartupPath.TrimEnd(\.ToCharArray()) \tmpPSD Monitor.mdb
    Private ConnectionString As String = Provider=Microsoft.Jet.OLEDB.4.0;Data Source= filename ;Jet OLEDB:Database Password=mysql ';OLE DB Services = -4
    Private Sub Form1_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
    m_conn = New OleDbConnection(ConnectionString)
    m_cmd = m_conn.CreateCommand()
    m_cmd.CommandType = CommandType.Text
    m_Timer.Interval = 10
    m_Timer.Start()
    End Sub
    Private Sub Form1_FormClosing(sender As System.Object, e As System.Windows.Forms.FormClosingEventArgs) Handles MyBase.FormClosing
    If m_Timer IsNot Nothing Then
    m_Timer.Stop()
    m_Timer.Dispose()
    m_Timer = Nothing
    End If
    End Sub
    Private Sub m_Timer_Tick(sender As Object, e As System.EventArgs) Handles m_Timer.Tick
    m_Timer.Stop()
    If isDoingFlag Then Exit Sub
    isDoingFlag = True
    Dim InsertCount As Integer = 0
    Try
    Debug.WriteLine(begin to insert 50 times...)
    m_conn.Open()
    Do
    InsertCount = 1
    If InsertCount = 50 Then Exit Do
    If m_conn IsNot Nothing Then
    m_cmd.CommandText = insert into t_StateLog ([DeviceCode],[StateID],[StateData],[TriggerTime]) values ('ST',0,True,'2013-08-17 11:17:23.901')
    m_cmd.ExecuteNonQuery()
    Application.DoEvents()
    End If
    Loop
    Debug.WriteLine(50 times inserted operation finished )
    m_conn.Close()
    Compact_DB(filename)
    Debug.WriteLine(begin to insert 100 times...)
    InsertCount = 0
    m_conn.Open() '----Error raised some times。
    Do
    InsertCount = 1
    If InsertCount = 100 Then Exit Do
    If m_conn IsNot Nothing Then
    m_cmd.CommandText = insert into t_StateLog ([DeviceCode],[StateID],[StateData],[TriggerTime]) values ('ST',0,False,'2013-08-16 09:50:31.894')
    m_cmd.ExecuteNonQuery()
    Application.DoEvents()
    End If
    Loop
    Debug.WriteLine(50 times inserted operation finished vbCrLf)
    Catch ex As Exception
    Debug.WriteLine(ex.ToString())
    Finally
    If m_conn IsNot Nothing Then m_conn.Close()
    isDoingFlag = False
    If m_Timer IsNot Nothing Then m_Timer.Start()
    End Try
    End Sub
    Private Function Compact_DB(ByVal filename As String) As Boolean
    Try
    If System.IO.File.Exists(strTmpFile) Then System.IO.File.Delete(strTmpFile)
    Debug.WriteLine(Compacting...)
    Dim Jet_Engine As JRO.JetEngine = New JRO.JetEngine()
    Jet_Engine.CompactDatabase(Provider=Microsoft.Jet.OLEDB.4.0;Data Source= filename ;Jet OLEDB:Database Password=mysql, _
    Provider=Microsoft.Jet.OLEDB.4.0;Data
    Source= strTmpFile ;Jet OLEDB:Database Password=mysql;Jet OLEDB:Engine Type=5)
    Jet_Engine = Nothing
    System.IO.File.Delete(filename)
    System.IO.File.Move(strTmpFile, filename)
    Debug.WriteLine(Compacted)
    Return True
    Catch ex As Exception
    Return False
    End Try
    End Function
    End Class
    Following is error information:
    System.Data.OleDb.OleDbException occurred
    ErrorCode=-2147467259
    Message=unspecified error
    Source=Microsoft JET Database Engine
    StackTrace:
    at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
    at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
    at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
    at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
    at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
    at System.Data.OleDb.OleDbConnection.Open()
    at WindowsApplication1.Form1.m_Timer_Tick(Object sender, EventArgs e) in C:\WindowsApplication1\WindowsApplication1\Form1.vb:line 68
    InnerException:

    DB:2.48:Oledb Connection Reopen Failed After Mdb File Compacted(System.Data.Oledb.Oledbexception (0x80004005): Unspecified Error) pm

    Hi,
    The issue is more suitable for Data Platform Development forums, and
    I found the duplicate thread already be posted. Any community members are interested in this topic, you can join the discussion in the link below:
    http://social.msdn.microsoft.com/Forums/en-US/f03574cf-b2be-484f-9365-e325a2dfb217/oledb-connection-reopen-failed-after-mdb-file-compactedsystemdataoledboledbexception

    THE CONTENT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS OR IMPLIED
    Thanks
    MSDN Community Support

    Please remember to Mark as Answer the responses that resolved your issue. It is a common way to recognize those who have helped you, and makes it easier for other visitors to find the resolution later.

  • RELEVANCY SCORE 2.47

    DB:2.47:File Unspecified Filename Is Larger Than The Maximum Size Supported By Datastore 'Unspecified Datastore zd



    I have a Win 2003 Std 32 bit server VM that has the following storage configuration:

    OS partition 70 GB on OS Datastore (VMDK) VMFS 3.33 Block Size 1 MB

    Pagefile Partition 10 GB on Pagefile Datastore (VMDK) VMFS 3.33 Block Size 1 MB

    Data Partition 420 GB on RDM - Virtual Compatibility mode (Vmx files are located on OS datastore) NTFS/HPFS (500 GB)

    I have been advised by both NetApp and Commvault that only Virtual Compatibilty mode can be used for RDMs.

    All storage is on NetApp Filers and I am running a CommVault backup solution.

    I am running ESXi 4.0.1 with vSphere Client on vSphere server.

    The problem I am having is that when I run a snapshot I get the following:

    File unspecified filename is larger than the maximum size supported by datastore 'unspecified datastore

    How do I configure this setup so that I can get a snapshot (and therefore a backup via Commvault) of all of the partitions on the VM?

    Thanks

    Daniel

    DB:2.47:File Unspecified Filename Is Larger Than The Maximum Size Supported By Datastore 'Unspecified Datastore zd


    Assign a larger block size.

    1MB block sizes will only allow a maximum file size of 256GB. When you try to snapshot your server it creates all the delta disks on the same drive as the configuration files. This means the delta disk for your Data Partition is trying to create itself on your OS datastore, VMware see's the 1MB block size and cracks the sads.

    To test this; create a new LUN with an 8MB block size, move your VM files except the data partition to the new LUN, take a snapshot.

    In my opinion VMware should make the default an 8MB block size for all new LUNS to stop this very common issue.

    Regards,

    Paul

  • RELEVANCY SCORE 2.46

    DB:2.46:Adding Cpu Memory Failed - File Unspecified Filename Was Not Found j8



    Hi All,

    I have a problem where I could not add more CPU and Memory to one of my VMware Host. It always says Reconfigure virtual machine - Status: File unspecified filename was not found.

    I do not know which file has been missing.

    The problem happened last night when I figured myself out that the vmdk file for this host was gone. All I did, was creating the new vmdk file by editing the new vmdk to point to my -flat.vmdk file. I could Power it On, all OK. However, I could not add more resources on this.

    Below is the Task from my vCenter Server (version 5.0.0):

    Reconfigure virtual machineserver_nameFile unspecified filename was not foundAdministratorvCenterServer_nameRequested Start Time: 6/06/2012 9:36:29 AMStart Time: 6/06/2012 9:36:29 AMCompleted Time: 6/06/2012 9:36:31 AM

    I am thinking, one of the files has been missing some information. But, I do not know which one, as I did open every single files and read it line by line. I could not find a clue at all.

    Please help me out, as I need urgently add more resources on this

    DB:2.46:Adding Cpu Memory Failed - File Unspecified Filename Was Not Found j8


    Hi All,

    I do sincerely apologise for forgetting about this ticket.

    I had fixed the issue long time ago, and totally forogot to post the answer.

    All I did to fix the situation was creating a new WMware guest and point to the existing hard drive. This simple workaround fixed the issue for good.

    Hope this helps.

    Thank you.

  • RELEVANCY SCORE 2.46

    DB:2.46:Every Time I Try To Do A System Restore, Getting Error Did Not Complete Successfully, Couldnt Access File fm


    original title: DELETE OX80070005 FROM MY LAPTOPmaintenance cleanup disk
    EVERY TIME I ACTIVATE "SYSTEM RESTORE I GET A MESSAGE - "DID NOT COMPLETE SUCCESSFULLY. COULD NOT ACCESS A FILE BECAUSE AN ANTI-VIRUS PROGRAMME IS RUNNING. TEMPORARILYDISABLE YOUR ANTI-VIRUS PROGRAMME AND TRY SYSTEM RESTORE. AN UNSPECIFIED ERROR OOCCURED
    DURING SYSTEM RESTORE (OX80070005)"
    I AM 86 AND UNABLE TO TACKLE THIS. ANY FAIRLY SIMPLE SOLUTION TO MY PROBLEM PLEASE ?

    DB:2.46:Every Time I Try To Do A System Restore, Getting Error Did Not Complete Successfully, Couldnt Access File fm

    Hi Geoffrey,

    Thank you for posting your question in Microsoft Windows Community. I understand that you are unable to perform system restore with error code 0X80070005.

    I can imagine the inconvenience you have experienced. I will definitely help you with this.

    I would suggest you to refer the suggestions from Gokul T dated December 1, 2009 and check the issue:

  • RELEVANCY SCORE 2.46

    DB:2.46:Unspecified Error zx


    Folks,
    I'm running Dreamweaver MX 2004 and I'm trying to connect to
    an access mdb file. When I test I get the Unspecified Error message
    and naturally no tables are found in my DB. I'm trying to connect
    via dsnless, OLE...etc.

    DB:2.46:Unspecified Error zx

    Yes, this is a local connection. I've got my site managed
    right and I use this:
    "Provider=Microsoft.Jet.OLEDB.4.0;
    Data Source=C:\Inetpub\wwwroot\truck\reports.mdb"
    and when I test, I get the error.

  • RELEVANCY SCORE 2.46

    DB:2.46:Unable To Launch Cisco Networking Academy Course. Error Is Undefined Error. Internet Explorer Cant Download Unspecified Error. k1


    Original Title: Cisco Networking Academy course won't open.
    I downloaded the cisco networking academy from my schools site. Once I opened the file I got a message that said and I'm paraphrasing"Windows Internet Explorer can't open these files and to try; Macromedia Flash or IrfanView. I tried to use Adobe MacroMedia
    Flash and that didn't even give me the avalon for cisco. But I downloaded IrFanView and it pulled up the index page which is the genesis to this networking academy. On this index page which I can now access since I downloaded IrFanView which was referred to
    my by Windows; and at the bottom of this page sais just like this
    "undefined
    ERROR" without the quotation marks but undefined on top of ERROR. When I click on Launch Course it sais "Internet Explorer can't download unspecified error." Now I got this message after I went to IrfanView which Microsoft told me to do. I was told from
    a buddy at work to go to Internet Explorer and go to Tools-Internet Options-Security-Custom Level-Enter and look at the settings and then change the settings from Medium-High (default) to Medium and see if that makes a difference and it did not. Please help
    as it would be appreciated.

    Regards,

    DB:2.46:Unable To Launch Cisco Networking Academy Course. Error Is Undefined Error. Internet Explorer Cant Download Unspecified Error. k1

    You're welcome.
    Is there a file known as index.html? If so, open the file

    Look at the index.swf files relating to these sites. Flash Movie files presented prior to the webpage loading. You're file may be the same because websites you access load cookies, tracking cookies, etc....

    http://www.bing.com/search?q=index.swf:%20%20what%20is%20thisFORM=WLETLBPC=WLEMQS=n

    Click on Tools Internet Options
    General Tab Delete Button
    Check all options availablein Delete Browsing History Window
    Press Delete

    In your previous post to Praveen, you wrote:

    When I tried to open it via internet explorer I got this verbatim:

    Invalid character
    index.js Line: 1
    Invalid Character
    swfobject.js Line:1
    Object expected
    index.html Line:18
    'SWFObject' is undefined
    index.html
    code:0
    URI: file:///C:CISCO_CCNA/Exploration1_English/theme/index.html Line: 51

    You received this message because there is an error in the script which is something that you nor I can do anything about because the developer(s) that wrote the script is the only person that can change it.

  • RELEVANCY SCORE 2.46

    DB:2.46:System Restore 79



    I have a 4 week old T135-S1310. Since new I havenot been able to system restore. I get message saying :- unable to system restore because it could not access a file. then next line is :-An unspecified error occured durng system restore (0x80070005).

    I have tried recovering using 0 during turn on and it goes through recovery OK , but will still not sysem restore following sme indows updates. Can anyone help cure thi problem

    col1

    DB:2.46:System Restore 79

    Satellite T135-S1310

    That occurs when restore points get corrupt. You can fix it by turning System Restore off and then on again. Unfortunately, all the existing restore points will be lost.

    Turn System Restore on or off




    -Jerry

  • RELEVANCY SCORE 2.46

    DB:2.46:Since Installing Windows 7 I Cant Add Any Sites To My Favorites...I Keep Getting The Message Unable To Create ... Unspecified Error.____Any Ideas____ 1f


    I keep getting the message "Unable to create ... Unspecified error."

    DB:2.46:Since Installing Windows 7 I Cant Add Any Sites To My Favorites...I Keep Getting The Message Unable To Create ... Unspecified Error.____Any Ideas____ 1f

    Unspecified error when adding a link to Favorites in Windows Vista [ Windows 7]
    http://www.winhelponline.com/blog/unspecified-error-when-adding-a-link-to-favorites-in-windows-vista/

    ~Robear Dyer (PA Bear) ~ MS MVP (IE, Mail, Security, Windows Update Services) since 2002 ~ Disclaimer: MS MVPs neither represent nor work for Microsoft

  • RELEVANCY SCORE 2.46

    DB:2.46:Can't Delete Snapshots - Even Unmounted Disks fx



    First of all thanks to you all for the help found in this site.

    We are using Vsphere 4.1, 12 node cluster.

    It's been 2 months since I started this problem, I've been following most threads of this issue and I found good answers, but I still have a problem.

    We are using Veritas Netbackup 7.0.1, we were trying to backup some machines "vmware-way", so it takes a snapshot, backups it and deletes snapshots.

    Some machines after time of use failed, backups couldn't be removed.

    Vsphere said "Unable to access file unspecified filename since it is locked"

    The backups can be seen on the snapshot manager as "Consolidated helper XX. XX"

    I found this problem in 4 machines 2 nearly solved 2 still stucked.

    What I first tried is, make a new snapshot, and then delete all : Snapshots didn't appear then in snapshot manager, nor even by commandline, but they were in the disk and when I do a backup they appear once again.
    If I do delete in Snapshot manager
    "vmware-cmd VMachine.vmx" hassnapshot
    hassnapshot() = 0"

    Some machines lost the CID in delta files, so I linked delta files onde again i love this command to check :
    egrep -i "cid|parentcid|vmdk" VMachine.vmdk VMachine-0000{0,1,2}{0,1,2,3,4,5,6,7,8,9}.vmdk --color
    I read this can happen in 4.0 when you have a snapshot and vmotion-storage machin.
    Then I tried linking disks and creating a new one:
    vmkfstools -i VMachine-000031.vmdk /vmfs/volumes/4bfbb494-33e7760f-d8d385e07428/VMachine_1/VMachine_2.vmdk
    VMachine Worked!
    But I had to stop VMachine, and delta files couldn't be deleted. Even after removing the disk from VMachine
    [root@ borrar]# rm VMachine.vmdk
    rm: remove regular file `VMachine.vmdk'? y
    rm: cannot remove `VMachine.vmdk': Device or resource busy

    [root@ borrar]# vmkfstools -D VMachine.vmdk
    [root@ borrar]# tail /var/log/vmkernel
    Jan 20 13:17:53 esxcem06 vmkernel: gen 903, mode 0, owner 00000000-00000000-0000-000000000000 mtime 23

    owner 00000000-00000000-0000-000000000000 - Unknown machine locking my disk files

    I tried lunreset for removing disk locks :
    vmkfstools -L lunreset vmhbaX:X:X:X

    It didn't work well.

    Then we updated to 4.1 and all hosts in the cluster were restarted, I was able to delete those files at last !

    So...

    Has any of you found other way to delete unwanted snapshots?
    I've read cloning Vmachine would work but I'm affraid not needed delta files get stucked once again and so I need to reboot 12 nodes to delete them, witch scares me !

    I hope you find this thread usefull and some one can help.
    Thanks in advance.

    Used links
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1006401
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1008728
    http://virtrix.blogspot.com/2007/06/vmware-dreadful-sticky-snapshot.html
    http://kb.vmware.com/kb/1017721
    http://vmutils.blogspot.com/

    DB:2.46:Can't Delete Snapshots - Even Unmounted Disks fx


    First of all thanks to you all for the help found in this site.

    We are using Vsphere 4.1, 12 node cluster.

    It's been 2 months since I started this problem, I've been following most threads of this issue and I found good answers, but I still have a problem.

    We are using Veritas Netbackup 7.0.1, we were trying to backup some machines "vmware-way", so it takes a snapshot, backups it and deletes snapshots.

    Some machines after time of use failed, backups couldn't be removed.

    Vsphere said "Unable to access file unspecified filename since it is locked"

    The backups can be seen on the snapshot manager as "Consolidated helper XX. XX"

    I found this problem in 4 machines 2 nearly solved 2 still stucked.

    What I first tried is, make a new snapshot, and then delete all : Snapshots didn't appear then in snapshot manager, nor even by commandline, but they were in the disk and when I do a backup they appear once again.
    If I do delete in Snapshot manager
    "vmware-cmd VMachine.vmx" hassnapshot
    hassnapshot() = 0"

    Some machines lost the CID in delta files, so I linked delta files onde again i love this command to check :
    egrep -i "cid|parentcid|vmdk" VMachine.vmdk VMachine-0000{0,1,2}{0,1,2,3,4,5,6,7,8,9}.vmdk --color
    I read this can happen in 4.0 when you have a snapshot and vmotion-storage machin.
    Then I tried linking disks and creating a new one:
    vmkfstools -i VMachine-000031.vmdk /vmfs/volumes/4bfbb494-33e7760f-d8d385e07428/VMachine_1/VMachine_2.vmdk
    VMachine Worked!
    But I had to stop VMachine, and delta files couldn't be deleted. Even after removing the disk from VMachine
    [root@ borrar]# rm VMachine.vmdk
    rm: remove regular file `VMachine.vmdk'? y
    rm: cannot remove `VMachine.vmdk': Device or resource busy

    [root@ borrar]# vmkfstools -D VMachine.vmdk
    [root@ borrar]# tail /var/log/vmkernel
    Jan 20 13:17:53 esxcem06 vmkernel: gen 903, mode 0, owner 00000000-00000000-0000-000000000000 mtime 23

    owner 00000000-00000000-0000-000000000000 - Unknown machine locking my disk files

    I tried lunreset for removing disk locks :
    vmkfstools -L lunreset vmhbaX:X:X:X

    It didn't work well.

    Then we updated to 4.1 and all hosts in the cluster were restarted, I was able to delete those files at last !

    So...

    Has any of you found other way to delete unwanted snapshots?
    I've read cloning Vmachine would work but I'm affraid not needed delta files get stucked once again and so I need to reboot 12 nodes to delete them, witch scares me !

    I hope you find this thread usefull and some one can help.
    Thanks in advance.

    Used links
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1006401
    http://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1008728
    http://virtrix.blogspot.com/2007/06/vmware-dreadful-sticky-snapshot.html
    http://kb.vmware.com/kb/1017721
    http://vmutils.blogspot.com/

  • RELEVANCY SCORE 2.45

    DB:2.45:Error: Snapshot Remove Failed: Unable To Access A File Since It Is Locked. z9



    when trying to delete a VCB snapshot I recieve the error below.

    \[2007-07-25 15:51:39.211 'vcbSnapshot' 3716 error] Error: Snapshot remove failed: Unable to access a file since it is locked.

    any help would be appreciated

    thanks,

    alex

    DB:2.45:Error: Snapshot Remove Failed: Unable To Access A File Since It Is Locked. z9


    You might check out these posts...

    http://www.vmware.com/community/thread.jspa?messageID=637447#637447

    http://kb.vmware.com/selfservice/dynamickc.do?cmd=showforward=nonthreadedKCdocType=kcexternalId=10043sliceId=2stateId=0%200%201702820

    http://www.vmware.com/community/thread.jspa?messageID=608522#608522

  • RELEVANCY SCORE 2.45

    DB:2.45:Re: "Unspecified Error (Exception From Hresult: 0x80004005(E_Fail))" 1d


    This error occurs when I try to do a copy design or move a folder or Inventor file inside the Vault client. I have rebooted the server that the ADMS sits on and rebooted my machine and one other that has access to it. I'm running Windows 7 and the other machine is running Windows XP pro (SP3). Both have the same problem. We are still able to check stuff in through the Inventor Vault interface, but unable to move or copy Inventor files. Please help.

    -Brian Hall-



    -Brian Hall-

    DB:2.45:Re: "Unspecified Error (Exception From Hresult: 0x80004005(E_Fail))" 1d

    What was the solution for the for support request is: 1-7748472981?

    I have a customer having the same problem descript.

    Regards

    Jens Moeller - CDLIGHT

  • RELEVANCY SCORE 2.45

    DB:2.45:Error When Starting Vm - Unable To Access File Unspecified Filename Since It Is Locked jc



    Running vSphere 4

    Our SAN lost power and after rebooting it, I cannot get a critical VM to start. It gets to 95% and then displays the following error dialog:

    Unable to access file since it is locked

    I created a new VM on a different SAN and pointed the hard drive to the .vmdk on the original SAN. I get the same error when trying to start the VM.

    When I run this to copy the vmdk file from the old SAN to the new:

    vmkfstools -i /vmfs/volumes/oldSAN/brsback/brsback-flat.vmdk /vmfs/volumes/newSAN/newbrsback/newbrsback-flat.vmdk

    I get this error:

    DiskLib_Check() failed for source disk Failed to lock the file (16392).

    I have no backup of this VM (I know, stupid) and am hesitant to do anything to the original vmdk file.

    Can someone help me clear this error so that I can start the VM on the old SAN or be able to copy it to the new SAN?

    Many thanks in advance.

    DB:2.45:Error When Starting Vm - Unable To Access File Unspecified Filename Since It Is Locked jc


    1)Check whether the you have mapped the vmdk file to some other server which is currently using it.

    If so remove the vmdk file from that VM

    2)Vmdk will be locked if you try to poweron the server , when some process is running on that server like cloning/snapshot when the server is in poweredoff state.So you can try this command, loginto the esx server hosting the VM

    vmware-cmd \vmfs\volumes\Datastore\Servername\ServerName.vmx stop

    then try to poweron the server.

  • RELEVANCY SCORE 2.45

    DB:2.45:Esxi 4.0 And Shared Drive For Oracle Rac Issue. jf


    We set up an Oracle RAC system with shared drives about a month ago, but it got corrupted last week.

    We are using ESXi 4.0(171494) and I have created two seperate VMs with Windows 2003 Server.

    I have created several virtual hard drives and created a seperate directory on the Datastore and moved the virtual drives into that folder.

    I have edited the VM settings to point the the virtual hard drives in the new datastore folder.

    I have set the disk.Locking= "FALSE", but when I try to startup the second machine, I get an error message "Unable to access a file since it is locked.lt;unspecified filenamegt;".

    I can start each VM and it sees the hard drives on the shared datastore.

    DB:2.45:Esxi 4.0 And Shared Drive For Oracle Rac Issue. jf


    Thanks very much KjB for that. My disks are now shared, partitioned and visible on both my RHEL VMs. I will press on with the Oracle RAC install now. Thank you again.

  • RELEVANCY SCORE 2.45

    DB:2.45:Error: Unable To Create Workitemstore See Inner Exception For Details. 97


    We are attempting to install TSWA on a second server. TSWA runs great on our first server but it is a development server. We have checked the App Pool and permissions. All permissions are set identical to the first server, but we get an Unable to create WorkItemStore see inner exception for details. error while attempting to login. We have no such problems logging in using Team Explorer. Below is the output from the log file. any help or advice is appreciated. Application: [Verbose, P 3664, T 2652/1, A 9799115, S 0, 1/14/10 00:08:32.297] CompressionModule attached to the application 9799115. Application: [Verbose, P 3664, T 2652/1, A 9799115, S 0, 1/14/10 00:08:32.297] ReportWrapperModule attached to the application 9799115. Application: [Info, P 3664, T 2652/1, A 9799115, S 0, 1/14/10 00:08:32.313] Microsoft Team System Web Access started processing... AppDomain Name: /LM/W3SVC/2/Root-1-129079013114852277 App Domain Id:2 Application: [Info, P 3664, T 2652/1, A 9799115, S 0, 1/14/10 00:08:32.313] WebAccess Application initialized... 9799115 Application: [Info, P 3664, T 2652/1, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:35.000] Session Started General: [Info, P 3664, T 2652/1, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:35.500] Response is redirected to /UI/Pages/Login.aspx?redirect=%2findex.aspx. TeamFoundationServer: [Info, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:43.531] Creating TeamFoundation Server... Application: [Verbose, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:43.546] Unable to find assembly Microsoft.TeamFoundation.Client.XmlSerializers, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a. Application: [Verbose, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:43.827] Unable to find assembly mscorlib.XmlSerializers, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089. Application: [Verbose, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.062] Unable to find assembly Microsoft.TeamFoundation.XmlSerializers, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a. TeamFoundationServer: [Info, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.343] TeamFoundation Server Successfully Created. Configuration: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.359] { Unable to write user settings to file E:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Web\App_Data\Settings\UserSettings\ksg0372.corp.config. Configuration: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.374] Exception: { Exception Message: Access to the path 'E:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Web\App_Data\Settings\UserSettings\ksg0372.corp.config' is denied. (type UnauthorizedAccessException) Exception Stack Trace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append) at System.IO.File.CreateText(String path) at Microsoft.TeamFoundation.WebAccess.UserSettings.Save(String filename) } Configuration: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.374] } Application: [Verbose, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.390] Unable to find assembly Microsoft.TeamFoundation.XmlSerializers, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a. TeamFoundationServer: [Info, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.796] Creating WorkItemStore... TeamFoundationServer: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.952] { Unable to create WorkItemStore. TeamFoundationServer: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.952] Exception: { Exception Message: Cannot complete the operation. An unexpected error occurred. (type UnexpectedErrorException) Exception Stack Trace: at Microsoft.TeamFoundation.WorkItemTracking.Client.DataStore.HandleComException(Int32 hr) at Microsoft.TeamFoundation.WorkItemTracking.Client.DataStore.DatastoreClass.ConnectEx(String connectionString, Int32 hCredentials, String defaultCachePath, String instanceId, String userSamName, String userFriendlyName, String userSid) at Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemStore.InitializeInternal() at Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemStore.Microsoft.TeamFoundation.Client.ITeamFoundationServerObject.Initialize(TeamFoundationServer teamFoundationServer) at Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemStore..ctor(TeamFoundationServer teamFoundationServer) at Microsoft.TeamFoundation.WebAccess.TfsConnection.get_Store() Inner Exception Details: Exception Message: Access is denied. (Windows) Could not open file 'E:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Cache\Tswa\81c7fcad-479b-44d9-9648-73ff79442315\0\metadata1.curcache'. (Work Item Tracking Metadata Cache) Access is denied. (Windows) Could not open file 'E:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Cache\Tswa\81c7fcad-479b-44d9-9648-73ff79442315\0\metadata1.curcache'. (Work Item Tracking Metadata Cache) Unspecified error (Windows) (type ClientException) Exception Stack Trace: } TeamFoundationServer: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.952] } UserControl: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.952] { Error occured while connecting to Team Foundation Server. UserControl: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.952] Exception: { Exception Message: Unable to create WorkItemStore see inner exception for details. (type WorkItemStoreException) Exception Stack Trace: at Microsoft.TeamFoundation.WebAccess.TfsConnection.get_Store() at Microsoft.TeamFoundation.WebAccess.TfsConnection.get_AccessibleProjects() at Microsoft.TeamFoundation.WebAccess.UI.Controls.Login.StartApplication() at Microsoft.TeamFoundation.WebAccess.UI.Controls.Login.PerformUserLogin(Boolean useDefaultCredentials) Inner Exception Details: Exception Message: Cannot complete the operation. An unexpected error occurred. (type UnexpectedErrorException) Exception Stack Trace: at Microsoft.TeamFoundation.WorkItemTracking.Client.DataStore.HandleComException(Int32 hr) at Microsoft.TeamFoundation.WorkItemTracking.Client.DataStore.DatastoreClass.ConnectEx(String connectionString, Int32 hCredentials, String defaultCachePath, String instanceId, String userSamName, String userFriendlyName, String userSid) at Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemStore.InitializeInternal() at Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemStore.Microsoft.TeamFoundation.Client.ITeamFoundationServerObject.Initialize(TeamFoundationServer teamFoundationServer) at Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemStore..ctor(TeamFoundationServer teamFoundationServer) at Microsoft.TeamFoundation.WebAccess.TfsConnection.get_Store() Inner Exception Details: Exception Message: Access is denied. (Windows) Could not open file 'E:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Cache\Tswa\81c7fcad-479b-44d9-9648-73ff79442315\0\metadata1.curcache'. (Work Item Tracking Metadata Cache) Access is denied. (Windows) Could not open file 'E:\Program Files\Microsoft Visual Studio 2008 Team System Web Access\Cache\Tswa\81c7fcad-479b-44d9-9648-73ff79442315\0\metadata1.curcache'. (Work Item Tracking Metadata Cache) Unspecified error (Windows) (type ClientException) Exception Stack Trace: } UserControl: [Error, P 3664, T 228/5, A 9799115, S bp0svx55bocedxzzjlqy3p55, 1/14/10 00:08:44.952] }

    DB:2.45:Error: Unable To Create Workitemstore See Inner Exception For Details. 97

    Hi Snorty,I am writing to follow up this issue. Can you let me know the status of this issue? Thanks.Hongye Sun [MSFT]
    MSDN Subscriber Support in Forum
    If you have any feedback on our support, please contact msdnmg @ microsoft.com

    Please remember to mark the replies as answers if they help and unmark them if they provide no help.
    Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.
    See what's happening in MSDN forum? Follow us at Twitter.

  • RELEVANCY SCORE 2.45

    DB:2.45:Virtual Machine Performance Issue 3x



    Hi Folks,

    I have a virtual machine while deleting a snapshot of the server it is unreachable for 2 Ping request after that it starts pinging. Also the disk consolidation is not happening on the server. Below is the error log for Disk consolidation. Please let me know if there is a permanent fix.

    Consolidate virtual machine disk files

    Servername

    .com

    Unable to

    access file

    unspecified

    filename

    since it is

    locked

    08.05.2014 21:08:51

    08.05.2014 21:08:51

    08.05.2014 21:09:20

    DB:2.45:Virtual Machine Performance Issue 3x


    Was the snapshot created by a backup application? In this case you may want to check whether the parent virtual disk is still locked by the backup application (e.g. mounted to a backup proxy, ...).

    If you can confirm the files are not in use by other processes and you are using vCenter Server (from where you receive this error message), then use the vSphere Client to logon to the ESXi hosts directly and try to delete the snapshot from there to see whether this makes a difference.

    Andr

  • RELEVANCY SCORE 2.45

    DB:2.45:Unable To Delete A File p3


    I'm unable to delete a a file from the filesystem.
    String fileName = "dummy.xml"
    boolean delete = (new File(fileName)).delete();It's not deleting this file from the filesystem.

    DB:2.45:Unable To Delete A File p3

    Sounds like the string doesn't contain a URL.This is the URL/String C:\ssps\workspace\dummy.xmlThat's not a URL. That's a file name.

  • RELEVANCY SCORE 2.45

    DB:2.45:Unable To Access File Unspecified Filename Since It Is Locked s1



    Hi,

    I am running 2 ESX Hosts. On each host I was running just the 1 virtual machine (both of which connect to disks on the same SAN). I have now created another Virtual Machine to run on each host (4 virtual machines in total, 2 virtual machines on each host).

    I have added the virtual disks into my new VM's (by using option 'use an existing virtual disk'). However when I try to power on my new Virtual Machines I am presented with the error:

    "Unable to access file since it is locked"

    On Host 1, I have powered off the 'old' Virtual Machine incase it was holding onto some files. I then powered up my new virtual machine and it works! However, I then go to power on the 'old' Virtual Machine and this has the same error!!

    AARGH!!

    DB:2.45:Unable To Access File Unspecified Filename Since It Is Locked s1


    Or even if I rebooted ESX Host 1 - perhaps any file locks would be released?

  • RELEVANCY SCORE 2.45

    DB:2.45:Filename Unspecified Filename Was Not Found 1a



    Hi everyone,

    I tried to expand a disk on a VM but it gave error that "Filename unspecified filename was not found"

    Then i checked the datastore and see those -flat.vmdk files. Please ignore the RDM in VM names, it was previously converted from RDM disks, but they are not RDM disks, all of them are normal VM vmdk disks.

    Here below I cannot find where is that VMX fileIn VM - edit settings - options - Virtual Machine configuration file : [Exchange_Emc] EXC02_RDM/EXC02.vmxVirtual Machine working location: [Exchange_Emc] EXC02_RDM/

    But it is not there! you can see in the output below as well.

    [root@esx8142 EXC02_RDM]# lsEXC02_1-flat.vmdkEXC02_RDM_2-flat.vmdkEXC02_RDM_5-flat.vmdkEXC02-flat.vmdkEXC02_RDM_3-flat.vmdkEXC02_RDM-flat.vmdkEXC02_RDM_1-flat.vmdkEXC02_RDM_4-flat.vmdkEXC02.vmsd

    I beleive first I have to find out where is that VMX file and convert as article: Recreating a missing virtual machine disk (VMDK) descriptor filehttp://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1002511

    Actual problem started with a request to expand a disk on this VM. VM is working ok but unable to expand any of the disks.

    Is that true action plan for me?

    Version: ESX 4.1.0, 348481

    thanks

    DB:2.45:Filename Unspecified Filename Was Not Found 1a


    Hi everyone,

    I tried to expand a disk on a VM but it gave error that "Filename unspecified filename was not found"

    Then i checked the datastore and see those -flat.vmdk files. Please ignore the RDM in VM names, it was previously converted from RDM disks, but they are not RDM disks, all of them are normal VM vmdk disks.

    Here below I cannot find where is that VMX fileIn VM - edit settings - options - Virtual Machine configuration file : [Exchange_Emc] EXC02_RDM/EXC02.vmxVirtual Machine working location: [Exchange_Emc] EXC02_RDM/

    But it is not there! you can see in the output below as well.

    [root@esx8142 EXC02_RDM]# lsEXC02_1-flat.vmdkEXC02_RDM_2-flat.vmdkEXC02_RDM_5-flat.vmdkEXC02-flat.vmdkEXC02_RDM_3-flat.vmdkEXC02_RDM-flat.vmdkEXC02_RDM_1-flat.vmdkEXC02_RDM_4-flat.vmdkEXC02.vmsd

    I beleive first I have to find out where is that VMX file and convert as article: Recreating a missing virtual machine disk (VMDK) descriptor filehttp://kb.vmware.com/selfservice/microsites/search.do?language=en_UScmd=displayKCexternalId=1002511

    Actual problem started with a request to expand a disk on this VM. VM is working ok but unable to expand any of the disks.

    Is that true action plan for me?

    Version: ESX 4.1.0, 348481

    thanks