• RELEVANCY SCORE 3.46

    DB:3.46:Network Bug - Might Not Be A Bug sa





    Bug:

    Network streaming is gone with this update. I watched a file last night perfectly, updated this morning and now that same file cannot play (or rather does and is very stuttery with no sound).

    Fixed:

    After leaving the machine for a while it worked perfectly. I have 4tb of files on the local connections. I imagine the new firmware was updating the file index or something.

    Try leave your machine on for +-3 hours and then try again.

    DB:3.46:Network Bug - Might Not Be A Bug sa


    Bug:

    Network streaming is gone with this update. I watched a file last night perfectly, updated this morning and now that same file cannot play (or rather does and is very stuttery with no sound).

    Fixed:

    After leaving the machine for a while it worked perfectly. I have 4tb of files on the local connections. I imagine the new firmware was updating the file index or something.

    Try leave your machine on for +-3 hours and then try again.

  • RELEVANCY SCORE 3.28

    DB:3.28:Called Party Located In The Voip Network Released The Call 97





    Do you have any thoughts as per subject above?

    One guy told me that we might be running into a bug here. The bug-Id is: CSCdt60512.

    I can not find this in the BUG TOOLKIT. Can we able to patch this?

    I need your assistance to look into this matter.

    Thanks.

    John

    DB:3.28:Called Party Located In The Voip Network Released The Call 97

    This setting is to be set on the channel bank, not on the gateway.

  • RELEVANCY SCORE 3.15

    DB:3.15:Wireless Network Connectivity/Inspiron 1200 dc




    I have limited or no connectivity to my wireless network. My DSL provider said that their card is ok and that there is an excellent signal. Apparently my ip address keeps changing. They suggested there might be a bug in Windows S.P. 2(windows XP) and perhaps a patch is available.Any ideas? Please help!

    DB:3.15:Wireless Network Connectivity/Inspiron 1200 dc

    What kind of security do you have on the network.

    These settings should give you proper connectivity:

    Setup a 64 bit HEX security on the router.

    This will giveyou a security key. This will containalphabets (Between A - F, nothing beyond that) and numbers (0-9)

    Configure the card to connect with this security. It should work out fine.

  • RELEVANCY SCORE 3.05

    DB:3.05:Samba Bug In Wrt350n Firmware xc


    I just bought a WRT350N, and my network computers would not appear in 'my network places'.

    I removed the apostrophe's in each computer's name - and the computers appeared on the network. Unfortunately, I was not able to remove the apostrophe on my Mac.

    There is a well-documented bug in Samba 3.0.x that causes computers with apostrophe's in their computer name to not be recognized. The WRT350N firmware is an embedded linux kernel with a version of samba that contains this bug.

    CISCO/LINKSYS - PLEASE UPDATE YOUR FIRMWARE AND CORRECT THIS PROBLEM!!!

    DB:3.05:Samba Bug In Wrt350n Firmware xc

    I'm using XP, too. I went into the control panel - system - computer name to change the description. The description must *not* have any apostrophe's. Apostrophe's in the description trigger the bug and the machine will not appear on the network.

  • RELEVANCY SCORE 3.04

    DB:3.04:Ipad Xfinity Mobil App Email Bug fx



    Is this a bug? I can't leave edit mode until I restart my iPad. I might be doing something wrong - its been doing this since day one.

  • RELEVANCY SCORE 2.94

    DB:2.94:Re: Is It Possible I Found A Bug In Java Pattern (Jdk 1.5)??? 9f


    Please...I'm running my whole environment on Java5, not Java6. There might of course be a fix in Java6, in which case it should be added to Java5, but I very much doubt it (since I have tried with JRE1.6 update 13 (latest is 14).

    DB:2.94:Re: Is It Possible I Found A Bug In Java Pattern (Jdk 1.5)??? 9f

    Thanks a lot! I always knew there was a very slim chance that I should have discovered a bug. I simply didn't know about the reset-mechanism. Now everything works fine.

    Thanks for all contributions!

    Morten Simonsen

  • RELEVANCY SCORE 2.93

    DB:2.93:Nonlinearfitwithweight Does Not Erturn Error If Maximum Number Of Iterations Is Exceeded 3s



    Hi,

    It seems to me that the function NonLinearFitWithWeight does NOT return an error if the maximum number of iterations is reached without reaching a solution - contrary to the description in the manual...

    Previously I had reported a related bug in the function NonLinearFitWithMaxIters which was fixed in CVI2009 (bug ID 183434). However, since this function NonLinearFitWithWeight is new to CVI2009 it might well be a bug, too...

    Wolfgang







    Solved!
    Go to Solution.

    DB:2.93:Nonlinearfitwithweight Does Not Erturn Error If Maximum Number Of Iterations Is Exceeded 3s


    This morning, preparing a demo code, I just realized that I have provided wrong data files - sorry for the confusion.

    So now I am attaching the demo code to demonstrate the erroneous behavior and the corrected data files: With this everybody should be able to reproduce this bug.

    It would be nice to hear about it, andI would also like to hear when this bug will be fixed: Essentially it means that the nonlinear fitting routine cannot be trusted: it may claim that the fit has converged while it has not. This is severe!!

    In the code, I am calling the same routine three times; the first time it correctly claims that the maximum number of iterations was exceeded.

    However, it does not report this error for 4 and 5 iterations, although 5 iterations are needed!










    Attachments:






    fitbug.zip ‏7 KB

  • RELEVANCY SCORE 2.93

    DB:2.93:Bug In Word 2010 14.0.5123.5000 kd


    Hello Microsoft,
    I'm not a Word MVP but I thought I might report a bug I came across with Word 2010 anyway! I did a writeup of the issue on my blog, please see the following link:
    http://clintboessen.blogspot.com/2011/02/microsoft-word-2010-shading-fill-bug.html
    Kind Regards,Clint Boessen MVP - Exchange Server, MCSE, MCITPx4, Dip Network Engineering
    Perth, Western Australia

    Blog: http://clintboessen.blogspot.com/

    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

    DB:2.93:Bug In Word 2010 14.0.5123.5000 kd

    Hello Clint,
    I was able to reproduce the issue on my side as well consistently.
    I checked with some other sources and it does not appear that this has been submitted yet.
    I filed this internally for review, however, I don't expect a fix to be created for this for now.
    Thanks for letting us know!

    Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
    Thanks!
    Adrian Microsoft Online Community Support

  • RELEVANCY SCORE 2.92

    DB:2.92:Network Card Compatibility List For Vmware? cj



    I just found out that VMPlayer isn't able to bridge network to a "Parallel Tasking" (3 Com) brand of 10/100 base T network card but bridge networks just fine to a Netgear brand of 10/100 base T network card. So, not all network cards with work with VMWare. It might be helpful to have a list of what network cards have been proven to work with VMWare.

    DB:2.92:Network Card Compatibility List For Vmware? cj


    From devzero

    since i never have made such experience like you and have at least had more then 10-15 different types of cards, it`s may be easier to maintain a list of cards which have known problems.

    This would work also.

    From devzero

    from what i know, problematic cards are such, which cannot enter promiscuous mode

    Interesting.

  • RELEVANCY SCORE 2.91

    DB:2.91:Maybe A Bug Of Multiscaleimage cs


    I have played with MultiScaleImage for a moment, I think there might be a bug on the ViewPortOrigin property. According to MSDN:

    C#

    DB:2.91:Maybe A Bug Of Multiscaleimage cs

    After some testing, I believe it's a documentation problem. MultiScaleImage and MultiScaleSubImage has been consistently using the Width as a calculation unit. No wonder the ViewportOrigin.Y should not be 0.5, when the image width and height are not same.
    So everything should be based on the image width.

  • RELEVANCY SCORE 2.87

    DB:2.87:_Byteswap_Ulong: Is This A Code Generation Bug? dj


    I might be missing something in the spec, or this could be a code generation bug. Can anyone verify?

    DB:2.87:_Byteswap_Ulong: Is This A Code Generation Bug? dj

    Weird stuff, the compiler is no doubt tripped up by the trailing 0.  Post to connect.microsoft.com.  Meanwhile, use:  unsigned v = *(unsigned*)PE\0\0; Hans Passant.

  • RELEVANCY SCORE 2.86

    DB:2.86:Low Line-Out Volume And Dropping 3g Network Connection d1


    I have an iPhone 4S with iOS 5.0.1 on ATT. Two things I've noticed since the upgrade:1) Line-out volume in my car has dropped significantly (2011 Honda Pilot, dock connector to AUX input). With iOS 5.0 everything sounded fine at a volume level between 6 and 8, but now I have to crank it up to somewhere in the 16-20 range in order to hear anything (music, podcasts, whatever). I didn't change any of my audio settings, so I'm not sure what's up with that.2) I will occasionally lose my 3G data connection ("Could not activate the cellular data network") and only a power cycle of the phone restores it. It seems to happen most often during/after a run with the Nike+ GPS app, so there might be a bug in the app. But I'm curious if anyone has seen anything similar.

    DB:2.86:Low Line-Out Volume And Dropping 3g Network Connection d1

    An update on the second item: this morning I disabled WiFi before launching the Nike+ GPS app for my morning run. No 3G network connection problems. I wonder whether it isn't an issue of trying to hand off a connection from WiFi to 3G.

  • RELEVANCY SCORE 2.86

    DB:2.86:Re: Retro-Changelog Not Trimming On Ids5.1 pm


    Known bug with iDS 5.1. Might be fixed in the soon to be released Service Pack to iDS 5.1. Bug your local Sun/iPlanet support personnel for more details.

  • RELEVANCY SCORE 2.85

    DB:2.85:Keeps Telling Me To Install Unity Web Player!!!! ad



    You might not be running one of these: Internet Explorer, Firefox, Chrome, Safari, Opera


    Or try install with admin rights. Otherwise, it might be a bug (doubt it).

    DB:2.85:Keeps Telling Me To Install Unity Web Player!!!! ad


    May I ask what browser are you using? There are answers here.


    If you are using Chrome browser then the enabling of NPAPI through chrome://flags, helped me. Also make sure to check chrome://plugins to see that you have enabled Unity player. It worked for me so try it!

  • RELEVANCY SCORE 2.85

    DB:2.85:Canon Irc 3580 Network Printer Problem ac


    Hello, I am using a Canon iRC 3580 printer connected to a network. With Snow Leoparda I was abble to print without any difficulties (even at the beginning was a pain to setup the printer...) I upgraded to Mac OS X Lion and now nothing works. I have read accros a few websites there might be a bug or some problem with CUPS or the drivers maybe?Any suggestions or help, please?For any additional information, I have no backup (my fault...).Thanks a lot!

    DB:2.85:Canon Irc 3580 Network Printer Problem ac

    Hi Daniel. I think the IPP configuration is failing due to the username and password pop-up not working. Since your Mac is on the untrusted subnet then it would appear that you need to authenticate so that you have access to the trusted subnet that the printer is on. And if your IT is saying that this system is not working then you will have to wait until you can get past this authentication, or get them to add your Mac to a trusted subnet so that you can have access to the printer.

  • RELEVANCY SCORE 2.84

    DB:2.84:Date.Lastdayofmonth() Exception: Unimplemented Method Called dp


    When i used java.domain.Date function: lastDayOfMonth(), i get the following exception:

    java.sql.SQLException: Unimplemented method called

    Might be a bug.

    DB:2.84:Date.Lastdayofmonth() Exception: Unimplemented Method Called dp

    Ok. I just pointed this function out. There are lots of ways to get the last day of the month, but this function appears in the code completion facility of JDeveloper, and most would think this is helpful to the developers only to find out later at runtime it was not implemented.

    So it should be handled by the guys at Oracle(not the ADF guys).

    thanks Frank,

    anton

  • RELEVANCY SCORE 2.83

    DB:2.83:Yet Another Ipod Touch User With Wifi Problem pd


    I have Linksys WRT54GS wifi router setup at home. I use four notebooks, one mac mini and one mobile phone (Nokia N80) without any problem on my wifi network.

    The only problem is with my brand new iPod Touch 16GB (firmware: 1.1.2 3B48b - no jailbreak). It always shows an error "Unable to join the network 'MY-SSID-NAME'". I have tried to change SSID, change security settings (WPA, WEP, no security, ...) - but nothing helped. All other devices (notebooks, macmini and phone) always worked like a charm.

    iPod worked only once - the first time I used it (after buying). Since then it does not. I have tried all resets, Restore in iTunes, ...

    I think it might be a bug in firmware. Please help someone.

    BTW: How (an where) can I report a bug to Apple ?

    DB:2.83:Yet Another Ipod Touch User With Wifi Problem pd

    Thats my problem even though router is on it says no wifi so i can't click on it and change any settings. Please help

  • RELEVANCY SCORE 2.83

    DB:2.83:Ts3276 I Tried All, Even Rebuilt My Email Accounts And It Didn't Work... kk


    I might have a specific case.I use my computer both at home and at work.At home it works fine. At work it only sends emails.Due to company standards I got to be connected to its network and server, and need to use a different mailbox to the one I use at home, since the mailbox server is the company one (I'm not exactly a pro on this matter, but I suppose you got the rationale of the situation).Well, I triplechecked all the mail box specifications, I did use the mail doctor and it says that everything is fine with my email accounts. I tried to rebuild my mail boxes and still it didn't work.What else can I do?Might that be a Mail bug?

    DB:2.83:Ts3276 I Tried All, Even Rebuilt My Email Accounts And It Didn't Work... kk

    What Mail program are you using, i.e., Mail, Outlook, Thunderbird, etc?MailWhose mail service are you using?MDeamon - server email softwareNetwizard - email provider (accessed directly through LAN)What are the server settings?Password authenticationWhat kind of email, i.e., POP3, IMAP, Exchange?POP3Did I answer your questions?

  • RELEVANCY SCORE 2.83

    DB:2.83:Preview Can't Open All Images In Multiple Selections...Is This A Bug? kp


    Note: "Open all files in one window" is selected in Preview preferences.

    This used to work fine in Leopard. Not complaining, might be a bug, but just want to verify. When I select multiple jpg images and double click, preview tends to open random number of images each time. all of them simply don't open up. Any idea what could be wrong?

    Neerav

  • RELEVANCY SCORE 2.82

    DB:2.82:Re: How To Poll Responses From A Server Constantly? md


    nd why must I
    let the thread sleep?You don't have to. That was unhelpful advice. It might be appropriate to sleep
    (pause) between polls. It might not. If each iteration of the poll is fast and consumes memory, you might end up
    with an OutOfMemory exception.

    Thread.sleep might give the garbage collector some time to free up memory.
    Also without Thread.sleep, you're continuously consuming network CPU resources.

    DB:2.82:Re: How To Poll Responses From A Server Constantly? md

    while(true)
    {
    try
    {
    if (input.ready()) {
    pluginReply = input.readLine();
    } else {
    Thread.sleep(100);
    }
    }
    catch (IOException ex)
    {
    ex.printStackTrace();
    }
    }Why would you want to do this rather than just call input.readLine()?

  • RELEVANCY SCORE 2.82

    DB:2.82:New Visualisation Bug 7a


    I thought i might get the attention of the mods and Sony.

    Firstly, thank you for this awesome Earth Visualization on Music player. It is so aweinspiring.

    Don't everyone agree?

    Now the bug, this may not be fixed but i noticed the way the Earth rotates.

    Usually the Earth spins on its axis. So the north and south poles are the point.

    Well the Earth appears to spins where the Caribbean is. The darkness moves over Antarctica. Surely it would not be cold over there.

    Yea i know it is a pointless post.



  • RELEVANCY SCORE 2.82

    DB:2.82:Pass Through Printing Not Working On Ip Based Printing 1k



    I think this might be a bug but want to see if anyone has a workaround.

    I have users accessing the view desktops over the internet. These users are in a remote office that has an IP based printer. They are using the windows client on XP and can print to the iP printer locally, however when they connect to their Windows 7 View desktops, the IP printers do not pass through. You can see USB printers but can not see any network printers that are not directly accessible via IP from the datacenter that houses the view desktops.

    Is there a way to pass through network based printers as local printers?

    DB:2.82:Pass Through Printing Not Working On Ip Based Printing 1k


    I think this might be a bug but want to see if anyone has a workaround.

    I have users accessing the view desktops over the internet. These users are in a remote office that has an IP based printer. They are using the windows client on XP and can print to the iP printer locally, however when they connect to their Windows 7 View desktops, the IP printers do not pass through. You can see USB printers but can not see any network printers that are not directly accessible via IP from the datacenter that houses the view desktops.

    Is there a way to pass through network based printers as local printers?

  • RELEVANCY SCORE 2.82

    DB:2.82:Whats The Official Way To Report A Bug In The Bcl? fc


    I've found a bug in the FileSystemWatcher class.  I've posted a workaround on this forum to help others to avoid the problem.  My question is, how do I get Microsoft to fix this bug?  The workaround is not a complete fix for the problem.  Is there a forum where I can post the bug so Microsoft will at least acknowledge the bug and indicate what their response might be? Keith Balaam

  • RELEVANCY SCORE 2.81

    DB:2.81:Possible Xamlreader Bug (Rc0) With Pathgeometry s8


    In WPF, the following Xaml was valid (output by XamlWriter, read by XamlReader):
    PathGeometry Figures=M0,0L150,0 /
    In Silverlight 2.0 RC0 (and Beta2), XamlReader throws a XamlParseException: Invalid attribute value M0,0L150,0 for property Figures.
    Instead, you must use the long-form syntax in Silverlight:
    PathGeometry
    PathGeometry.Figures
    PathFigure
    PathFigure.Segments
    LineSegment Point=150,0/
    /PathFigure.Segments
    /PathFigure
    /PathGeometry.Figures
    /PathGeometry
    Is this a bug? Or is it considered not supported? Since the short-form syntax was valid in WPF (and output by WPF's XamlWriter) I am guessing this might be a Silverlight XamlReader bug.

    DB:2.81:Possible Xamlreader Bug (Rc0) With Pathgeometry s8

    Actually, the PathGeometry I am deserializing is not for a Path object, it is a property of my own custom DependencyObject (originally developed for WPF). I can work around this by using the long-form syntax, but it is inconvenient since WPF's XamlWriter
    does not output the long format. I will also need to access the path info programmatically, but I have read in other posts that this does not work properly when using the short-form path syntax, so I guessI wouldbe stuck with using the long syntax anyway.
    -Chris

  • RELEVANCY SCORE 2.81

    DB:2.81:Ping Class Producing False Positives, Alternative To Check Connectivity? 7z




    If you can replicate that about the unreachable and Ping, that sounds like a good bug report to submit.



    beyond what you've stated already, I suggest just using WWW class and try downloading a very small web page might make a good test


    or connect to your multiplayer server, or whatever you will be using the network for, and fail gracefully if connection is not there.


    DB:2.81:Ping Class Producing False Positives, Alternative To Check Connectivity? 7z


    (Adding a comment to an old posting in case somebody finds this using search...)


    To truly know internet can be reached, there needs to be captive portal detection. It's a technique also used by operating systems, where you simply do a request to an url which gives a reply with known contents. That helps to know if you're e.g. hitting a public WiFi login page. Just checking Application.internetReachability or doing a Ping doesn't guarantee that internet connection works.


    I have made an easy asset called Internet Reachability Verifier and it allows you to use one of the captive portal detection methods maintained by big OS vendors, or your own custom url. It keeps you up-to-date whether you have verified internet access and it works with desktop and mobile platforms (self-hosted custom method can be used with the web player plugin if you think that's necessary). If you want to give it a try, there's more info here: http://j.mp/IRVUN

  • RELEVANCY SCORE 2.81

    DB:2.81:Changing The Local Storage (Possible Bug) 91



    I read the article Change Storage Locationand noticed that is was a known bug in v 0.9.0 and I am running version 0.9.1.57.ge740549

    Is this still a bug? If not, where can the local storage be? I have a 1T and 2T connected to my upstaits computer, running Windows 7 32bit Ultimate but might chang it to Windows 8 64bit.

    We also have a NAS325 server with 6T of data.

    Is there a limit on where the default location can be? And if so, what is it? Can I use the USB or the NSA thru the network?

    Thank you!

    Corey

    DB:2.81:Changing The Local Storage (Possible Bug) 91

    msclearwa wrote:

    soon as you translate, i'll let ya know.

    WOW





    If this post was helpful, please click the green "+" button below

    Read my take on YourMusic HERE.

    If you like the Starred list and its ease of use, and would like to see its return, please support by adding Kudos and comments HERE

    If you'd like a lean and fast Spotify desktop, without all the default apps slowing things down, please support my idea thread to opt out of them by adding an option to turn them off and on in Preferences. Staff has shown interest in this idea. Click the "Kudos" button and add your comments HERE

  • RELEVANCY SCORE 2.81

    DB:2.81:Music Stops Playing Randomly 3k



    Spotify just randomly stops playing (like every 5-10 minutes online). I've read that memory should be cleared or it might be connection problem. I don't think so, as it is happening on different wifi networks (mobile network as well). I'm using galaxy s3 which is brand new, for sure there is enough space. I'm not facing problems with other audio applications, as radio for example.

    Is there a fix for that? I'm really enjoying spotify, but with this bug it's impossible to use...







    Solved!
    Go to Solution.

    DB:2.81:Music Stops Playing Randomly 3k


    Bumping my post. It's been happening again... a lot actually. It's not just my phone either, my mother who also has the same phone, same network, andSpotify subscription notices the same problem. We can have full bars with a data connection and Spotify will refuse to keep a steady connection. I'll have to restart Spotify completely just to get it to work correctly. It's also been displaying the no internet connection message at the bottom of the screen... when on WiFi and/or mobile data.




    Spotify Rewards Card Last.fm Spotify Integrate SoundwaveDon't forget to add your kudos below!

  • RELEVANCY SCORE 2.80

    DB:2.80:List Component Missing Some Rows 81


    This is a strange bug I'm finding. I have a list component
    that is dynamically populated. However some rows seem to be
    displayed while others are not. If I refresh the page some one row
    will appear. If I click refresh again that row might not appear
    anymore. Has anyone seen this before????

    DB:2.80:List Component Missing Some Rows 81

    Ok i tested it out the problem is NOT that the whole list is
    not populate but rather that lets say i scroll down in the list
    then scroll back up it fails to rerender the ites in the list. They
    appear again if i scroll down and up again but others are appear
    and disappear as well! Help!

  • RELEVANCY SCORE 2.80

    DB:2.80:Bug: In A List Details Screen, The Initial Sort Order Does Not Match Selected Sort By Property c8


    Here's a Connect bug you might like to look at vote on, if you're affected by it, or think it should be addressed.
    https://connect.microsoft.com/VisualStudio/feedback/details/666012/in-a-list-details-screen-the-initial-sort-order-does-not-match-selected-sort-by-property
    Yann

    DB:2.80:Bug: In A List Details Screen, The Initial Sort Order Does Not Match Selected Sort By Property c8

    Here's a Connect bug you might like to look at vote on, if you're affected by it, or think it should be addressed.
    https://connect.microsoft.com/VisualStudio/feedback/details/666012/in-a-list-details-screen-the-initial-sort-order-does-not-match-selected-sort-by-property
    Yann

  • RELEVANCY SCORE 2.80

    DB:2.80:Xorg 1.8 Intel Framebuffer Bug s3



    Im running into this bug in the current version of Xorg; not sure if its from intel-dri, xorg-server, libdrm, etc. Just wondering if there might be an update to the Arch package in the cards since the freedesktop team already has a fix.

    Bug 28515 - [i915] Failed to allocate framebuffer when exceed 2048 width

    (Sorry if this has already been reported)

    DB:2.80:Xorg 1.8 Intel Framebuffer Bug s3


    It was in libdrm, heres the patch (works great ):

    http://cgit.freedesktop.org/mesa/drm/co … e798a19f0c

    Last edited by dholt (2010-07-20 23:29:16)

  • RELEVANCY SCORE 2.80

    DB:2.80:Sharepoint 2010 Bug Reporting 9c


    Hello,
    I'm sorry if this question might have been asked alot. Is there a place to report bugs?
    I dont mean one thread but something usefull and nothing chaotic :-)
    If not, shouldn't this be nice to add ? SP2010 not so bug free anyway ;-)
    Thanks,My SharePoint blog: http://blog.voltje.be Twitter: voltje

    DB:2.80:Sharepoint 2010 Bug Reporting 9c

    You can open an OFFBUG case with Microsoft free of charge, but do not expect a resolution. This is just avehicleto take your bug and put it in the database. It doesn't look like SharePoint has a presence on Connect right now.http://sharepoint.nauplius.net

  • RELEVANCY SCORE 2.80

    DB:2.80:I Want To File A Bug Report 7x



    I can't find the appropriate place for filing bug reports, seems Spotify could simplify bug reporting, e.g., a search for bug report on their website might result in a quick link with an easy form.

    I found the bug forum, but I'm not allowed to post there. Again this could be easier.

    Anyway, here's the bug. OS X 10.7.5, MBP i7, Spotify 0.9.1.57.

    There is one item in my inbox. The title is grayed out. If I select it and hit delete, Spotify crashes.

    DB:2.80:I Want To File A Bug Report 7x

    Are those "Top Tracks" playlists @samcohenm ?




    PeterSpotify Community Mentor and TroubleshooterSpotify Last.FM Twitter LinkedIn Meet Peter Rock Star Jam 2014

    If this post was helpful, please add kudos below!

  • RELEVANCY SCORE 2.80

    DB:2.80:Re: Is There A Character Limit On Pl/Sql Region Code? j9


    Depending on your Application Express version, you might be hitting a bug. If not it may be a known limit. Does this happen when you exceed 4K or 30,000 characters?

    Scott

  • RELEVANCY SCORE 2.79

    DB:2.79:Ilpower-3-Controller_Port_Err: f9



    Getting Error on cisco WS-C3650-24PD switch

    Jun  9 13:39:51.152: %ILPOWER-3-CONTROLLER_PORT_ERR: Controller port error, Interface Gi1/0/6: Power Controller reports Short detected

     

    the problem is this port is connected to a UPS network management card, so this port should not be trying to engage PoE at all on this port. I turned off PoE on this port manually and this message stopped. is this possibly an issue with the switch hardware or do you think it might be more or a software bug?

     

     

     

    DB:2.79:Ilpower-3-Controller_Port_Err: f9


    no it is not this switch "3650" is running IOS-XE this is NOT a 3560

  • RELEVANCY SCORE 2.78

    DB:2.78:Network Scanner Question cf



    We use network scanner to find any vulnerability in ios..Just have doubt regarding,if something we get only using network scanner(say some traceback on switch),does it mean that there exist a real case scenario(without network scanner) in which we can again see that(though we might not be able to determine that scenario).

    I don;t know if the question makes sense ...never used network scanner.

    Thanks,

    Ankur

    DB:2.78:Network Scanner Question cf


    Hmm..Thanks Jon...Looks like i should start using network scanner..Any recommendations ?..I googled it,but got lot of info and lot of different types of network scanners.

  • RELEVANCY SCORE 2.78

    DB:2.78:Report Bug To Microsoft p8


    Hello, there might be a bug in the Microsoft RDP software. I have some minidump files which indicate that the system crashes have been caused by RDP. How can I report the possible bug to Microsoft? I did not find any possible way on their pages. Thank's, Frank.

    DB:2.78:Report Bug To Microsoft p8

    try to send an email to Microsoft or use a feedback to Microsoft

  • RELEVANCY SCORE 2.77

    DB:2.77:Windows Media Error Message That Reads: Windows Media Player Cannot Play The File. The Server Might Not Be Available Or There Might Be A Problem With Your Network Or Firewall Settings. ss


    Windows Media Player cannot play the file. The server might not be available or there might be a problem with your network or firewall settings.

    DB:2.77:Windows Media Error Message That Reads: Windows Media Player Cannot Play The File. The Server Might Not Be Available Or There Might Be A Problem With Your Network Or Firewall Settings. ss

    Windows Media Player cannot play the file. The server might not be available or there might be a problem with your network or firewall settings.

  • RELEVANCY SCORE 2.76

    DB:2.76:Bug - Mail 10.4.5 - Pop Access To Exchange-Based Server - Workaround pp


    Hi folks, here's a workaround for a bug in Mail's POP access to a MS Exchange Server based mail server which has POP access enabled.

    When you attempt to create the account you may get the error message:

    "The POP server 192.168.1.3 is not responding. Check your network connection and that you entered the correct information in the Incoming Mail Server field. If it still doesnt respond, the server might be temporarily unavailable.

    If you continue, you may not be able to receive any email."

    The problem arose because since 10.4.5 (and possibly earlier versions of Tiger) the Mail app incorrectly assumes (at least for our server) that the server is using NTLM authentication, which it is not.

    Workaround:
    Hit the Continue button anyway. On the next screen (titled "Incoming Mail Security" make sure that Authentication is set to "Password". That's it.

    This setting can also be accessed via the Advanced tabe of the Accounts dialog.

    Important note
    If the Authentication setting is left as "NTLM" then the Connection Doctor (Window menu) will incorrectly report that "Connection and login to server succeeded". You may be surprised to find that you will get this response whatever username and password you supply (this is another bug ...)

    hth

    iMac DV 450MHz, 640MB, 20GB HD, Airport Xtreme Mac OS X (10.3)

    DB:2.76:Bug - Mail 10.4.5 - Pop Access To Exchange-Based Server - Workaround pp

    Hi folks, here's a workaround for a bug in Mail's POP access to a MS Exchange Server based mail server which has POP access enabled.

    When you attempt to create the account you may get the error message:

    "The POP server 192.168.1.3 is not responding. Check your network connection and that you entered the correct information in the Incoming Mail Server field. If it still doesnt respond, the server might be temporarily unavailable.

    If you continue, you may not be able to receive any email."

    The problem arose because since 10.4.5 (and possibly earlier versions of Tiger) the Mail app incorrectly assumes (at least for our server) that the server is using NTLM authentication, which it is not.

    Workaround:
    Hit the Continue button anyway. On the next screen (titled "Incoming Mail Security" make sure that Authentication is set to "Password". That's it.

    This setting can also be accessed via the Advanced tabe of the Accounts dialog.

    Important note
    If the Authentication setting is left as "NTLM" then the Connection Doctor (Window menu) will incorrectly report that "Connection and login to server succeeded". You may be surprised to find that you will get this response whatever username and password you supply (this is another bug ...)

    hth

    iMac DV 450MHz, 640MB, 20GB HD, Airport Xtreme Mac OS X (10.3)

  • RELEVANCY SCORE 2.76

    DB:2.76:Network Key pd


    since getting a new simcard for my phone i haven't been able to get past the homepage because it keeps asking for a "network key". I've looked through all my instruction books but can not find what the network key might be, can you ehlp???

    DB:2.76:Network Key pd

    no i ordered the sim for my new phone because my original handset is broken, my new phone is just a cheap pay as you go phone called alcatrel (only costs £10), i just need to be able to use the phone so i can text and make calls, but i need the network key!!That's confusing, you bought a new phone and a new SIM? Didn't the new phone come with a SIM?Is the new phone definitely an O2 phone.



    No - there isn't an app for it.

  • RELEVANCY SCORE 2.76

    DB:2.76:Pxe Boot Not Working After Soft Reboot xm



    Dear all, this has been a bug in VMWare Server for a long time, but I never got around to submitting it (the VMWare web-site does not seem to allow you to submit a bug if you don't have a support contract). I'll just post it here so it might be read by someone at VMWare at some point.

    Here's the problem: If you boot a VM through PXE over the network, everything works fine. If you subsequently issue a soft reboot (e.g. 'reboot' if the OS you booted is Linux) and let the machine go into PXE boot again, it will just sit there trying to get a DHCP response. Resetting the VM resolves the issue.

    I suspect that the PXE code in the network boot ROM is not reinitialized when a soft reboot is performed.

    Best regards,

    Martijn de Vries

    DB:2.76:Pxe Boot Not Working After Soft Reboot xm


    Dear all, this has been a bug in VMWare Server for a long time, but I never got around to submitting it (the VMWare web-site does not seem to allow you to submit a bug if you don't have a support contract). I'll just post it here so it might be read by someone at VMWare at some point.

    Here's the problem: If you boot a VM through PXE over the network, everything works fine. If you subsequently issue a soft reboot (e.g. 'reboot' if the OS you booted is Linux) and let the machine go into PXE boot again, it will just sit there trying to get a DHCP response. Resetting the VM resolves the issue.

    I suspect that the PXE code in the network boot ROM is not reinitialized when a soft reboot is performed.

    Best regards,

    Martijn de Vries

  • RELEVANCY SCORE 2.75

    DB:2.75:K1-1000 Scsi Controller Firmware Bug k3




    Hi, the firmware in the fusion scsi controller (LSI53C1030) is too old, it
    has a bug. This was confirmed by lsi and might be the root of my problems
    (very, very slow speed under linux). The LSI bios/firmware utility however
    is not capable of updating the firmware on the cards. Could MSI please
    offer a tool to update the firmware of the scsi controller?

    Thanks.

    DB:2.75:K1-1000 Scsi Controller Firmware Bug k3


    Sorry, nope, no reply yet....

    You might want to call your local MSI office and ask them about a newer BIOS....
    The Taiwan site doesn't allway's list the latest....

    Your MSI Office might be willing to send you the latest (could be beta) version, as they do have access to those files....
    I don't so I can't check...sorry....

  • RELEVANCY SCORE 2.75

    DB:2.75:Possible Bug In Anyconnect 7d



    Hi,

    Has anyone tried out the "new" setting CertificateStoreOverridefalse/CertificateStoreOverride in their AnyConnect profile? According to Cisco doc, this allows a non-admin (Windows) to use computer certs for authentication. But if I set this option to true like this:

    CertificateStoreOverridetrue/CertificateStoreOverride

    ...my AnyConnect can no longer connect. I don't even get to a point where I can choose cert or type credentials.

    Just thought it might be interesting to try out for some of you, to find out whether or not this is a general bug. The feature would be nice.

    Running ver. 8.2(2)

    /Rasmus

    DB:2.75:Possible Bug In Anyconnect 7d


    Rasmus,

    For all possible new bugs. Please open TAC cases. Send us DART taken after failed connection.

    Is the situation still the same on AC2.5?

    Marcin

  • RELEVANCY SCORE 2.75

    DB:2.75:Internet Connection Problem With Sp2: Limited Or No Connectivity... 1d


    After installed the recovery system which came with SP2, my Dimension XPS Gen 4 has not been able toconnect internet through LAN. There is nothing wrong with the network adaptercard and internet connection, except the bug of "Limited or no connectivity" in SP2.

    There is a website tried to solve the bug problem, which they described as (http://www.pchell.com/support/limitedconnectivity.shtml):

    "This connection has limited or no connectivity. You might not be able to access the Internet or some network resources. "
    It appears this is a bug in Service Pack 2 of Windows XP dealing with a loss of network connectivity for workstations that use Microsoft’s L2TP-based virtual private networking (VPN) client to connect to servers that are connected to NAT-based networks. However, this bug seems to appear in situations that are not associated with VPNs either.

    Solutions they provided includes adopting patches, running Registry fix, running WinsockXPFix.exe, shutting down firewall, limiting connection speed etc. but none seems to work with my PC. And a windows xp SP1 system CD could not detect my hard drive disk before installation maybe because of my PC's high configuration (4089MB memory, 500GB RAID0 HD, 3.4G Processor). Questions were sent to Dell technician service and complaints but none was replied. I am very frustated with this high-cost computer at the moment.

    Any helps please?

    :smileysad:

    Message Edited by daihewei on 02-21-2005 09:35 PM

    DB:2.75:Internet Connection Problem With Sp2: Limited Or No Connectivity... 1d


    check these pages,

    troubleshooting limited or no connectivity
    "This connection has limited or no connectivity. " "You might not be able to
    access the Internet or some network resources" ...
    www.chicagotech.net/Troubleshooting/noconnectivity.htm

    w2k/xp network issues
    Limited or no connectivity. Symptoms: 1) The connection status on XP shows “Limited
    or no connectivity”. 2) The ipconfig lists the ip 169.254.xx ...
    www.chicagotech.net/w2kxpnetissues.htm

    Bob Lin, MS-MVP, MCSE CNE
    How to Setup Windows, Network, VPN Remote Access on http://www.HowToNetworking.com
    Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
    This posting is provided "AS IS" with no warranties.

  • RELEVANCY SCORE 2.75

    DB:2.75:Might Be A Gridviews Bug: Grid View Can Not Be Scrolled Using Left/Right Forward Key xk


    The scollview control can be scrolled using left/right forward key(in keyboard), but the gridview can not be scrolled with same way.

    Is is a gridview's bug?

  • RELEVANCY SCORE 2.75

    DB:2.75:Big Worry: The Code 43 Bug (Graphcs Accellerator Wddm Driver Does Not Work On Many Configurations) sc


    Working on a solution of the knon Code 43 Bug in Windwos Vista i came to the conclusion that the Problem may be independent on the graphics accellerator - it seems to be a problem on the Intel 915 Mobile Chipset drivers - mot people on the net might have this chipset in their notebooks and experience these problems...
    Does anyone know a solution for this Bug?
    My card still only works with XP ´Driver, not supporting Aero/Glass and with poor performance )-:

    DB:2.75:Big Worry: The Code 43 Bug (Graphcs Accellerator Wddm Driver Does Not Work On Many Configurations) sc

    This may be the problem on some configuration, since i use a pentium m processor, it doesnt solve my and many other users problem.

  • RELEVANCY SCORE 2.75

    DB:2.75:Iphone 4 Sometimes Can't Find Wifi Networks jm


    I know of 2 iPhone 4's doing this. It will know and see a wireless network fine (my home for example). Then I go to work and come home, the phone can't see the network or connect to it. If I reboot it sees the network right away when it comes up. Happens every few days on several different networks. Software bug that might be fixed in an upcoming OS? Any ideas?

    DB:2.75:Iphone 4 Sometimes Can't Find Wifi Networks jm

    I know of 2 iPhone 4's doing this. It will know and see a wireless network fine (my home for example). Then I go to work and come home, the phone can't see the network or connect to it. If I reboot it sees the network right away when it comes up. Happens every few days on several different networks. Software bug that might be fixed in an upcoming OS? Any ideas?

  • RELEVANCY SCORE 2.74

    DB:2.74:My '/' Character Is Not Being Read As A Math Symol s3



    hello;

    something very strange is happening in code view: when I type a '/' as in 10 / 2, the '/' character is turning the code into a comment, sort-of;

    any thoughts ... is this a bug or might I be doing something very stupid ... which is possible;

    thanks;

    DB:2.74:My '/' Character Is Not Being Read As A Math Symol s3


    Looks like DW is getting confused. You might want to log a case with support.

  • RELEVANCY SCORE 2.74

    DB:2.74:Might Be A Bug In Reputation Tab. mk



    Screen shot

    User Id = Madhuri Akula

    I think I do not need to explain anything.

    DB:2.74:Might Be A Bug In Reputation Tab. mk


    Hi Dv,

    I can explain how this could occur:

    User logs in and earns 1 point for first-time-ever login. Point total = 1

    User asks a question, then marks his own answer as Correct, receiving no additional points. Point total = 1 still.

    Someone unmarks the user's own answer as Correct, which would normally lead to -10 points. But the system cannot remove more points that the user's point total, which is still just 1 so far, so in this case it subtracts -1 only.

    Hope this helps.

    --Audrey

  • RELEVANCY SCORE 2.74

    DB:2.74:Help And Support Center Network Settings 71


    No matter what I do I can not get my support center to work. Whenever I click on a topic this message shows up on the right side of the support center.

    Cannot display the page
    The page you are trying to view cannot be displayed. This may be because:
    If you are trying to view this content over the network, there may be network congestion or a problem with your connection.
    There might be an error in the page's address.
    The page might not be available.
    Please check your network connection or try another page.

    DB:2.74:Help And Support Center Network Settings 71

    Peter,
    Since you neglected to post any of your computer's specs it's impossible to provide a 'tailor-made' solution. The Microsoft KB articles linked to below would be a good place to start.

    Blank Pages in Microsoft Windows Millennium Edition (Me) Help and Support

    Cannot View the Windows Me Help and Support Page

  • RELEVANCY SCORE 2.74

    DB:2.74:"Mailbox" Column Disappearing sf


    Whenever I turn on the "mailbox" column in my "Email to Act Upon" smart folder (not the inbox), it disappears when I go to another folder and then return. Is this a bug? Might it be because one of my folder names is not in English but in Japanese characters?

    DB:2.74:"Mailbox" Column Disappearing sf

    Whenever I turn on the "mailbox" column in my "Email to Act Upon" smart folder (not the inbox), it disappears when I go to another folder and then return. Is this a bug? Might it be because one of my folder names is not in English but in Japanese characters?

  • RELEVANCY SCORE 2.74

    DB:2.74:Catalyst Switch - Ping Bug? 8k



    We recently upgraded our Catalyst switches to ver 7.6(10) to fix a bug. Now when I ping from a catalyst switch I get correct information 9 out of 10 times. Then I get something like this:

    ping 10.10.1.1

    !!!!!

    ----10.10.1.1 PING Statistics----

    5 packets transmitted, 5 packets received, 0% packet loss

    round-trip (ms) min/avg/max = 26/7121/35324

    The ping itself completes in the normal amount of time, a couple of seconds. So I was thinking this might be a bug. I cannot get these results from an IOS device or any other host on the network.

    Has anyone seen this before?

    Thanks

    DB:2.74:Catalyst Switch - Ping Bug? 8k


    Update is bug ID CSCeh31028, status is New / Cosmetic.

    Kinda Cool, even though it's just cosmetic, it's my first bug with Cisco.

  • RELEVANCY SCORE 2.74

    DB:2.74:Atv Disconnects From Wireless Network Nightly - Possible Solution 9f


    for the last 10 days my atv regularly disconnected from the network overnight, requiring entry of the network password etc. this seems to be a confirmed bug as many others posted having the same problem. last night i left itunes on my imac running overnight and low and behold, the atv did not loose the connnection! so this bug might have something to do with itunes running, rather than some hardware wireless issue....?

    DB:2.74:Atv Disconnects From Wireless Network Nightly - Possible Solution 9f

    for the last 10 days my atv regularly disconnected from the network overnight, requiring entry of the network password etc. this seems to be a confirmed bug as many others posted having the same problem. last night i left itunes on my imac running overnight and low and behold, the atv did not loose the connnection! so this bug might have something to do with itunes running, rather than some hardware wireless issue....?

  • RELEVANCY SCORE 2.73

    DB:2.73:Network Shortcut Menu Shows Networks With Red Cross After Sleep (This Connection Requires An Active Internet Connection) a9


    I've had this problem occassionally now where I put the computer to sleep over lunch, and then, when I come back, I try and access my VPN connections from the Networks menu in the Notification area on my PC. The two VPN connections that I use both have a red cross and the This connection requires an active internet connection message. The internet is connected and everything else on the system works fine, it's just this Networks shortcut menu that seems to be upset. Last time it happened I rebooted the system but this time I went into Network connections the traditional way and I could connect to both VPN networks fine. Once I had done that the Network shortcut menu seemed to have caught up and was once again showing both connections without the cross. This feels like a bug to me, although granted it seems to have something to do with sleep, which I guess means it might be down the hardware drivers? I guess I was after reporting it as a bug, if that is possible. It seems that connect is not the place for bugs from what I read on my travels. Cheers

    DB:2.73:Network Shortcut Menu Shows Networks With Red Cross After Sleep (This Connection Requires An Active Internet Connection) a9

    No need to restart explorer.
    all I do is disable / enable the network adapter.
    if its a wireless connection the youjust need to disconnect and reconnect the wireless network.
    I've had this problem since Vista.
    Microsoft should pull their finger out and fix it.
    you could try toturn off discovery of active internet connections using the following registry key
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NlaSvc\Parameters\Internet
    EnableActiveProbing set valueto 0
    then restart your computer.

  • RELEVANCY SCORE 2.73

    DB:2.73:Ann: Xml Parser For Java V2.0.2.6 3p


    --
    The v2.0.2.6 of the XML Parser for Java is now available for download. The following features and bug fixes are included:

    Changes:
    Conformance to the XSLT/XPATH October REC.

    New API in XSLStylesheet class:
    removeParam(String param)
    resetParams()

    Bug fixes:
    Bug #1111423: OutOfMemory exception, if multiple calls made to document()
    Bug #1101028: Unexpected character error in DTD parsing document using Docbook DTD
    Bug #1101021: #default not supported in exclude-result-prefixes
    Bug #1099830: Extra characters inserted into output using the XML Parser
    Bug #1099663: HTML output does not allow only doctype-public to be specified
    Bug #1099536: HTML output does not disable escaping for script, style unless lowercase
    Bug #1098738: ArrayOutOfBoundsException xsl:if test="not(@a)'"
    Bug #1095047: XSLProcessor NPE'S on named templates with non-empty namespaces
    Bug #1094971: XSLStylesheet needs methods for removing parameters
    Bug #1092351: Using valueof() shuffles order of elements in my source document
    Bug #1086663: xsl:sort data-type attribute can now be a namespace-prefixed name
    Bug #1086661: xsl:version attribute now required on literal result element
    Bug #1064692: Default xml-serialization should use empty-element syntax
    Bug #1064689: Current() function doesn't work correctly

    This is the sixth production patch release for v2.

    --------------------------------
    Oracle XML Team http://technet.oracle.com
    Oracle Technology Network

    null

    DB:2.73:Ann: Xml Parser For Java V2.0.2.6 3p

    --
    The v2.0.2.6 of the XML Parser for Java is now available for download. The following features and bug fixes are included:

    Changes:
    Conformance to the XSLT/XPATH October REC.

    New API in XSLStylesheet class:
    removeParam(String param)
    resetParams()

    Bug fixes:
    Bug #1111423: OutOfMemory exception, if multiple calls made to document()
    Bug #1101028: Unexpected character error in DTD parsing document using Docbook DTD
    Bug #1101021: #default not supported in exclude-result-prefixes
    Bug #1099830: Extra characters inserted into output using the XML Parser
    Bug #1099663: HTML output does not allow only doctype-public to be specified
    Bug #1099536: HTML output does not disable escaping for script, style unless lowercase
    Bug #1098738: ArrayOutOfBoundsException xsl:if test="not(@a)'"
    Bug #1095047: XSLProcessor NPE'S on named templates with non-empty namespaces
    Bug #1094971: XSLStylesheet needs methods for removing parameters
    Bug #1092351: Using valueof() shuffles order of elements in my source document
    Bug #1086663: xsl:sort data-type attribute can now be a namespace-prefixed name
    Bug #1086661: xsl:version attribute now required on literal result element
    Bug #1064692: Default xml-serialization should use empty-element syntax
    Bug #1064689: Current() function doesn't work correctly

    This is the sixth production patch release for v2.

    --------------------------------
    Oracle XML Team http://technet.oracle.com
    Oracle Technology Network

    null

  • RELEVANCY SCORE 2.73

    DB:2.73:Heartbleed Bug Assessment cs



    Hello

    Some general questions on the Heartbleed bug :

    For heartbleed bug,

    1. is there any general assessment method I can do to see if my systems (running on Windows) is affected by this bug?

    2. If my network does not have access to internet , will there be any risks ?

    Thanks

    RgsAlan Tan

    DB:2.73:Heartbleed Bug Assessment cs


    McAfee has a site that checks weather your site is vulnerable to this exploit. http://tif.mcafee.com/heartbleedtest

    No, OpenSLL is used by several applications and network appliances as well, not only Apache.

    More informatin about Heartbleed:

    http://heartbleed.com

  • RELEVANCY SCORE 2.73

    DB:2.73:Wcf Ria V1.0 Sp2 Bug? 9z


    Hi to all,
    I've a problem, whenever I call DomainDataSource.RejectChanges, DomainDataSource.HasChanges remains set to true, but DomainDataSource.DomainContext.HasChanges is set to false!
    DomainDataSource.HasChanges should always be equal DomainDataSource.DomainContext.HasChanges. But this is not the case. It might be a bug?!?

    Regards,
    Matjaz

    DB:2.73:Wcf Ria V1.0 Sp2 Bug? 9z

    This seems a known bug. Please refer to below links
    http://sklementiev.blogspot.com/
    http://social.msdn.microsoft.com/Forums/en-US/silverlightwcf/thread/21d66aef-cfbb-46fd-9abe-55067964a3bb#ebff61ff-d801-4b71-b4e1-1e6387041959

  • RELEVANCY SCORE 2.73

    DB:2.73:Weird Font Size In Unity Editor xp



    It might be related to this? http://answers.unity3d.com/questions/403308/editor-font-changes-when-pressing-ctrl-p.html


    In any case I might suggest you submit a bug report.

    DB:2.73:Weird Font Size In Unity Editor xp


    It might be related to this? http://answers.unity3d.com/questions/403308/editor-font-changes-when-pressing-ctrl-p.html


    In any case I might suggest you submit a bug report.

  • RELEVANCY SCORE 2.73

    DB:2.73:Player Can't Move In Windows Standalone 1d



    Maybe its a bug , when i Made my project to the Standalone , and i set the graphics to fastest my player could jump 20 Times higher than Written in my script


    while when i ran in on fantastic mode , it jumped the normally set height


    im not sure its a common bug , but maybe you could try playing with the settings at the start of the game a bit


    from then you might be able to fix the problem.


    hope i could help


    if its not this i wouldnt know what might be the problem

    DB:2.73:Player Can't Move In Windows Standalone 1d


    I tried, but it didn't change anything.
    It's realy strange.
    Could it be something else?
    Thanks for answering btw.,

  • RELEVANCY SCORE 2.73

    DB:2.73:Emmc Brick Bug ak



    With this brick bug looming in the heads of skyrocket users, would ATT offer an exchange? I do not like the idea that my phone might be a ticking timebomb. If I ever have to factory reset it I could end up with a desk weight. This isn't just a flash a leaked rom issue, the brick bug is built into our phones straight from Samsung. I feel like I was sold a faulty piece of equipment.

    DB:2.73:Emmc Brick Bug ak

    hatepump wrote:

    I've been running Sky-ICS for the last couple months but decided to go back to GB. I will check out CM9, I haven't touched a "stock" ICS rom since the first leak AOKP was put on XDA. I love my Skyrocket, I just worry that I will kill it and it will be out of my control LOL. How's your battery life with CM9? I'm running Faux's kernel at 1.7GHz and my battery life is insane compared to the ICS kernels I have ran.

    I can't speak as to battery life for CM9 on the Skyrocket, as my only involvement with that has been coordinating Superbrick (defective eMMC) protection with the T989 and I727 CM9 maintainers.

    It's amazing on the I777 and N7000.

  • RELEVANCY SCORE 2.72

    DB:2.72:Simple Error Or Unity Bug? d9



    It means DirectX is having trouble creating a Depth of Stencil buffer (part of the underlying rendering/rasterizing subsystem). This might be because Unity is requesting an invalid format or there is not enough memory. I'm more of an OpenGL man so I'm not exactly sure.


    What are the specs on your graphics card?

    DB:2.72:Simple Error Or Unity Bug? d9


    It means DirectX is having trouble creating a Depth of Stencil buffer (part of the underlying rendering/rasterizing subsystem). This might be because Unity is requesting an invalid format or there is not enough memory. I'm more of an OpenGL man so I'm not exactly sure.


    What are the specs on your graphics card?

  • RELEVANCY SCORE 2.72

    DB:2.72:Bug Confirmed 1.04.17v - Vob Stutter Over Network 8f



    No change from 1.04.10V. VOB files over a WIRED network still stutter. Tried Factory and Hard reset. This feature works great on 1.03.49V.

    Playing Video files is a core product feature that must be fixed ASAP. I have 2 devices and am continuing to lose confidence in WD rapidly with each version of the firmware introducing or not fixing CORE FEATURES of the device like playing videos, music and pics over a network.

    More info on the bug can be found here: http://community.wdc.com/t5/Firmware/Firmware-BUG-​Confirmed-V1-04-10-MKV-files-network-share/td-p/94​...

    DB:2.72:Bug Confirmed 1.04.17v - Vob Stutter Over Network 8f

    parnott100 wrote:richUK wrote:

    Metalunna wrote:I have a live plus and the bug/fix is the same, but the option to get to the dvd menus is not available when hitting play on the video folder (and then hiting option-it lists other items but not menu). The menu is important to me when watching tv shows on dvd..it allows me to make sure im watching the right episode
    Try entering the VIDEO_TS folder and pressing OK or play on one of the vobs.

    No,just tried it and itdoes not work. You get get the VOB stuttering/jerky playback problem.

    My answer wasreferringto DVD menus not the stuttering.




    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~WDTV Live Streaming; WDTV Live; WD Live Hub; My Book Live. Running Windows XP on a PC / Laptop.

  • RELEVANCY SCORE 2.72

    DB:2.72:Bug: Unterminated String In Printf Arguments 89



    The printf code has a notable bug where it will run off the end of the argument and access whatever memory happens to be behind it if the argument has an escape sequence. This might lead to a stack smash and arbitary code execution. Everything after the first character is not supposed to be there.

    printf "%b\n" '\x40'

    DB:2.72:Bug: Unterminated String In Printf Arguments 89


    The printf code has a notable bug where it will run off the end of the argument and access whatever memory happens to be behind it if the argument has an escape sequence. This might lead to a stack smash and arbitary code execution. Everything after the first character is not supposed to be there.

    printf "%b\n" '\x40'

  • RELEVANCY SCORE 2.72

    DB:2.72:Bug With Nokia 6275 Blue-Tooth Stack pj


    Hi,

    I have identified a bug with NOKIA 6275 mobile.

    The bug description is if the Blue-Tooth data transfer happens 4 or 5 times sequentially, the next time the data transfer fails.

    I think the Robustness Test for '6275 Bluetooth Stack' might not have been proper.

    I guess it might be a problem with Blue-Tooth stack implemeneted for NOKIA 6275. Perhaps, the memory allocated for the Blue Tooth Stack might not have been cleared properly. Hence it is not accepting data after some time.

    I hope this bug can be fixed in the future versions.

    Please reply to this

    Regards,
    Ram



    Ram,
    Software Engineer.

    DB:2.72:Bug With Nokia 6275 Blue-Tooth Stack pj

    An important part of any bug report is the version of the product you are testing.

    As a Software Engineer, surely you must appreciate the frustrations of trying to find a bug that was fixed 4 releases ago, because the bug reporter told you the wrong version information. Also, sometimes bugs show up in some hardware revisions, and nor in others, so it's important to include all of the information.

    So, does this impact Hardware revision 6000, Software version V BL107V0900.nep 21-09-06 RM-154 with browser version 6.2.3.8.g.1.110, an earlier version, or a later version?

    If it's in a later version, it may have been introduced by a fix to another bug. On the other hand, if it's in an earlier version, it may already be fixed, but you aren't running the updated software. On the gripping hand, it could be a hardware problem, which may have been fixed, or introduced, in currently-shipping hardware.

  • RELEVANCY SCORE 2.72

    DB:2.72:Where's "Network Controller" Driver? 3f



    My Device Manager has a bit yellow question mark next to "Network Controller." When I tried to install a driver for that item, none could be found. Searching on the Resource CD, I see things that might be the network controller driver, but it is not really clear to me and I do not want to install something that I might not need.

    Any leads on where I might locate and identify and download the driver for the Network Controller? Also I wouldn't mind knowing what this item is and what it is for.

    Thanks!, ernsign

  • RELEVANCY SCORE 2.72

    DB:2.72:Bug: Widescreen Videos On 4:3 Television Not Letterboxing. mp



    I might be the only person on the planet running a WDTV Live on a 4:3 CRT television but there you go

    Anyway, there is a bug in the current firmware that no matter whether you choose Widescreen or Normal, any widescreenvideo plays on the television in a filled or zoomed mode. ie. not in letterbox format.

    Hope they fix that in the next release (along with the Windows 7 networking issues)

    Greetings from Australia!




    Greetings from Australia !

    DB:2.72:Bug: Widescreen Videos On 4:3 Television Not Letterboxing. mp


    Hey, you're not alone. I bought the WDTV specifically because of its composite output. I've connected it to a 29 inch CRT andset the aspect ration to Normal (4:3).

    I don't seem to have the issue you're facing. The videos I'm playing appear in wide format on the screen. However I have noticed that the text in the WDTV menus appear fuzzy. I see this only for the text in the menus. Other text like subtitles appear fine.

    I'm using the WDTV Live HD with the original firmware 1.01.00.

  • RELEVANCY SCORE 2.72

    DB:2.72:Spartan-6 Self Destruct Feature? Or Is It Bug? 71



    from Spartan-6 documentation:

    "Bitstreams must not contain a sync word followed by all 1’s. This condition might cause damage to the device."

    Is this an feature or bug? should this go into ERRATA and be fixed ASAP??

    Antti

    DB:2.72:Spartan-6 Self Destruct Feature? Or Is It Bug? 71


    It looks like this is an example of an overzealous caution about corrupt bitstreams that was inserted in the Spartan-6 Configuration User Guide. This should be updated in the next revision of the user guide.




    ------------------------------------------------------------------Have you tried typing your question into Google? If not you should before posting.Too many results? Try adding site:www.xilinx.com

  • RELEVANCY SCORE 2.71

    DB:2.71:Vmware Console Can't Find Your Guest If You Use A Hostname To Login To The Admin Website. xs



    I found one big bug in the VMWare console on 2.0 RC1 that still has not been fixed.

    If you login to the VMWare admin site using a hostname like "http://vmbox.corp.company.com" and then try to open a console to your machine it will timeout trying to find it. If you login with the IP address of the system it works fine. I suspect this might be because on our network WINS might be resolving the name to IP instead of DNS. Does the console plug use a system command to lookup the name or it own internal DNS api?

    Of course the workaround is to always use the IP address to login to your admin website.

    DB:2.71:Vmware Console Can't Find Your Guest If You Use A Hostname To Login To The Admin Website. xs


    This is true. But I would rather not have all the users of virtual machines need to alter their host files to connect to the console of the guest system. I guess what I'm looking for is an acknowledgement that this is a bug or was by design.

  • RELEVANCY SCORE 2.71

    DB:2.71:Another Bug jz



    Attempted to create a private share accesible by two users. Got this error:

    33154 - Unknown error. Please ensure you are not facing network connectivity issues and try again.

    This productcould be described as 'riddled with bugs'. Did WD do any testing at all? Simplest stuff doesn't work!

    DB:2.71:Another Bug jz


    mmm sounds like the error described was right then




    Click the Kudos star to say thank you for helpful posts and be sure to come back and 'Accept as Solution' under options for the post that solved your issue.

  • RELEVANCY SCORE 2.71

    DB:2.71:Computer Name Change And Network Name fz


    Recently I changed my computer name from "XY Z's Computer" to one without the dreaded apostrophe and the spaces.
    I did this in Sharing under Computer Name:

    However, after doing this and rebooting, the new name is there - good - but if in Sharing Preferences, I click Internet Sharing and then click Airport Options, my original name is there, under the title, Network name:

    Is there a single location where these changes can be made simultaneously?
    Are there any other places where one might find the original computer name?
    Is this a bug or simply something not well-documented that I should have known about?

  • RELEVANCY SCORE 2.71

    DB:2.71:Is Physics.Spherecast Supposed To Ignore Triggers, Even When Told Not To? j8



    First, and this isn't directed at you but in general, if I had a nickel for everytime someone writes is Unity bug?!, you know the saying - I'd be rich. And about 1 of 10,000 might be a Unity bug, the rest are not.


    Second, the doc on SphereCast really couldn't be any clearer on this:


    https://docs.unity3d.com/Documentation/ScriptReference/Physics.SphereCast.html


    Note: The sphere cast does not work against colliders configured as triggers...


    I don't see a similar note on OverlapSphere, so you might try that.

    DB:2.71:Is Physics.Spherecast Supposed To Ignore Triggers, Even When Told Not To? j8


    First, and this isn't directed at you but in general, if I had a nickel for everytime someone writes is Unity bug?!, you know the saying - I'd be rich. And about 1 of 10,000 might be a Unity bug, the rest are not.


    Second, the doc on SphereCast really couldn't be any clearer on this:


    https://docs.unity3d.com/Documentation/ScriptReference/Physics.SphereCast.html


    Note: The sphere cast does not work against colliders configured as triggers...


    I don't see a similar note on OverlapSphere, so you might try that.

  • RELEVANCY SCORE 2.71

    DB:2.71:Iphone Os 4.1 j1


    Hi

    Has anyone heard any rumours when OS4.1 might be released? My 1 day old iPhone 4 has just started showing random temperature warnings and it's not even warm to touch!!! That's got to be a bug, right?

    DB:2.71:Iphone Os 4.1 j1

    Note:
    * It would be 4.0.1
    * Apple impartially confirmed one on their announcement letter in a "Few Weeks" from July 2 when it came out.

    So it could be August or September. (Not declaring a truth to it.)

  • RELEVANCY SCORE 2.71

    DB:2.71:Bug - Wifi dp



    This evening I noticed a bug within the wifi,it kept disconnecting. That is not the bug.

    The bug(s)

    Shows no available networks

    When "open network" connection is picked. Network A

    Pick - save and connect network A

    It times out - here is the bug it then shows network B on top of page (should be A)

    Anyone elze notice this?

    DB:2.71:Bug - Wifi dp

    Had a similar problem after update. Nothing helped until I turned it off resrt it and powered it up. Wonder if low power and borderline wifi means it times out

  • RELEVANCY SCORE 2.71

    DB:2.71:Wifi Bug? 8x



    Hello,

    When I've connected to my network my wifi works perfectly fine, the moment i turn off the wifi and leave my house then come back and turn it on the wifi says my network is not in range. I have to turn off and restart the phone for it connect and work again. what could be the problem? maybe a software bug?

    any help with this guys?

    DB:2.71:Wifi Bug? 8x


    did you do whatgwhispererzsuggested?

  • RELEVANCY SCORE 2.71

    DB:2.71:Transparent Text 8c



    I'd like the team to explain if they consider it a bug that when I select transparent for text it goes white.

    then explain

    If it is a bug when they might fix it

    If it is not a bug why the inferface allows me to select it.

    DB:2.71:Transparent Text 8c


    I expect I'm naturally skeptical but based on past experience topics chosen will not be the ones we vote for but instead those that avoid talking about such embarrassing design/implementation errors.

  • RELEVANCY SCORE 2.71

    DB:2.71:Vbox Problem ....Or Flex Bug fk



    Hi All,

    I have a layour which contains a list.

    The list appends many VBox dynamically.

    We can access each VBox by click an arrow so it expands down.

    The layout works fine when the content in vbox is less .

    If the vbox has more content and we expand all the VBox then the stylesheet is not properly rendered.

    What might be the problem ....

    Or it is bug .

    DB:2.71:Vbox Problem ....Or Flex Bug fk


    I can describe the problem .

    We have n layer VBox.

    Each VBox contains components (mostly Text inputs combo boxes)

    The Components are loaded based on a xml

    If we open the three VBox it works fine

    but fails when we open 4th vbox.....

    actuallt the style goes for vbox1

    vbox4 has the style..

    Kindly help me

  • RELEVANCY SCORE 2.71

    DB:2.71:Lumia 635 Cellular Network Problem. pf



    Hi.

    I just got a bug whit cellular network. In My job cellular network signal is not great so it lies at 2-3 bars. Suddenly My phone turned into flight mode and rebooted. After reboot I got one sms that was sent to Me a while a go. That could be hardware or software bug?

    DB:2.71:Lumia 635 Cellular Network Problem. pf


    Is the issue still occuring? Can you check if there's an available update for your phone's software? Go to Settings phone update to do that. For your system apps, go to Store ... downloads. Make sure to use WiFi and have enough battery when doing such. Where are you located, by the way?

    If you have confirmed that your phone is up-to-date, try pressing the power key and hold it for 10 seconds. The phone will restart. After this workaround, monitor your phone's behavior and keep us posted.

    Best of luck!





  • RELEVANCY SCORE 2.70

    DB:2.70:Can't Contact The Store With Itunes 7 d9


    I can't connect to the store! Everytime I try it sits around for aobut five minutes and tells me to make sure my network connection is active and to try again. I'm on a university campus using a wireless connection. Anybody have clue as to what might be wrong? Or is this just another bug?

    DB:2.70:Can't Contact The Store With Itunes 7 d9

    I can't connect to the store! Everytime I try it sits around for aobut five minutes and tells me to make sure my network connection is active and to try again. I'm on a university campus using a wireless connection. Anybody have clue as to what might be wrong? Or is this just another bug?

  • RELEVANCY SCORE 2.70

    DB:2.70:Ctios Applation Getting Logged Off.. aa



    Hi ,

    CTIOS logoff been repored by some agents on version 7.5.12277.No network disconnectio/phone disconnection been reported.

    Can this happeneing due to keepalive getting delayed between CTIOS Appln--- Agent PG. It seems we have 7200 sec configured for CTIOS to be go into not not ready if remain in idle state.

    One agent who used to refersh his CTIOS application in 10-15 min has not reported any log off.

    Can anyone please let me know if refresh can fix this or there is know bug for it or might network delay causing this.

    Regrads,

    Brajesh.

    DB:2.70:Ctios Applation Getting Logged Off.. aa


    Brajesh,

    Glad to hear you're making some progress.  As to why the other agents aren't getting kick out, it's impossible to tell.  I would look at their logs.  Maybe there connected to the other CTIOS server or maybe they are on a network segment which didn't experience any issues.  You would have to look at logs and network lay out to find your answer.

    david

  • RELEVANCY SCORE 2.70

    DB:2.70:Iphone 4 With Ios 6 Keeps Rebooting Randomly j7


    Hello,I own an iPhone 4 with iOS 6 (10A403) ATT Version. The problem that I have might be a bug with iOS 6 but I am not sure. What is happening is that every once in a while when I am using my phone whether is to text someone back or receive a phone call, my phone "reboots." By reboot I mean the screen goes black and almost right away the apple comes up, couple seconds pass and then I'm back to my lockscreen as if nothing had happened. 3G/WiFi is still on and it doesnt take time to reconnect to the network so I'm guessing its not a full reboot but I don't know what to do but it is getting kind of annoying. Any help would be appreaciated. Thanks.

    DB:2.70:Iphone 4 With Ios 6 Keeps Rebooting Randomly j7

    can i ask this morning i receive the msg on my iphone4 updated for 6.1 os...wen i press ok its automatically shut down now my phone didnt open but on and off apple logo only..is this damage?or just rebooting...help me pls...:)

  • RELEVANCY SCORE 2.70

    DB:2.70:Hamachi Not Installing Network Adapter? (Windows 8) 1k



    1st time postiong on this forum, I recently re-installed hamachi but it does not install the adapter, it use to be able to but it doesn't work now.Is this a bug in the latest version? is there any way to fix this?

    DB:2.70:Hamachi Not Installing Network Adapter? (Windows 8) 1k


    1st time postiong on this forum, I recently re-installed hamachi but it does not install the adapter, it use to be able to but it doesn't work now.Is this a bug in the latest version? is there any way to fix this?

  • RELEVANCY SCORE 2.70

    DB:2.70:Resource Usage Spreadsheet - Refreshing Activities In Activity Table p3


    This might be a known bug, it might be a tick box I've missed somewhere.

    When using the Resource Usage Spreadsheet View, the activity table in the top half does not refresh when selecting different activites in the resource assignments (bottom half of the screen)

    Any clues ?

    I've got the Reorganize Automticaly ticked in my User Preferences

    DB:2.70:Resource Usage Spreadsheet - Refreshing Activities In Activity Table p3

    sury wrote:
    F5 just refreshes the in-memory DB on the client with the latest data from the database.

    It will refresh the UI for sure - as the in-memory DB and the physical DB might have gone out of whack..

    lately i have seen sometimes where the UI doesn't get refreshed for some elements...

    CheersI agree with you about refreshing the data presented in the UI with fresh data from the db. also as far as I know user view data within the usser session is committed to db tables.
    but what I meant was: is the layout itself (not the content data) restored from its last saved definition? I think not.
    thanks

  • RELEVANCY SCORE 2.70

    DB:2.70:Please Could Someone Help Me Set Up My Wireless To Be Security Enabled zx



    Hi i am hoping someone could help me to set up my network to be security enables is it hard to do

    I have a belkin  router

    and i think someone might be using my wireless across the street but am not sure how do i set up my network to be a security enabled network

    Thank you

     

     

    ROss.g

    DB:2.70:Please Could Someone Help Me Set Up My Wireless To Be Security Enabled zx


    I know the model comes with a manual......

     

    the two things you need to be concerned with are the Encryption Algorithim used and the associated password.  By default the router is wide open.

     

    Use nothing less than WPA or WPA2 encryption and a very strong password consisiting of letters (lower UPPER case) numbers (12378) and special characters ($*@#$()

     

    and make this password no less than 12 characters long.

  • RELEVANCY SCORE 2.70

    DB:2.70:Xps M12010 Cannot Connect To Internet With Both Lan And Wireless ka


    Hello,

    If anyone has any feedback please help out.

    I am currently having problems with my new XPS M1210 connecting to the internet with both with my Local Area Connection and my wifi wireless connection. I am able
    to ping a website and I get an IP address in return. I have a MacBook Pro and both
    my wireless and LAN connection works and it's not my home connection or my ISP provider. I have also tried reinstalling the drivers for the network and that didn't help. I have turned off and on my firewall and that did not work.

    If anyone can help me out, that would be great. I am now thinking that it might be a Vista bug!

    Thanks,
    Valva

    DB:2.70:Xps M12010 Cannot Connect To Internet With Both Lan And Wireless ka

    Hey! Thanks for the help, but I figured out that I had firewall conflicts. After uninstalling Mcafee, it all came back. Vinny

  • RELEVANCY SCORE 2.70

    DB:2.70:Bug - 3.2.1. - Renaming Of Local Variable Doesn't Work In 95% Of Cases jf


    Hi guys,
    Renaming of local variable might be useful if it would work.
    Take some non trivial package, right click some local variable - Refactoring - Rename Local Variable - Change the name and press ok.
    You will get an error message "yxz appears to be not a local variable"

    DB:2.70:Bug - 3.2.1. - Renaming Of Local Variable Doesn't Work In 95% Of Cases jf

    Hi guys,
    Renaming of local variable might be useful if it would work.
    Take some non trivial package, right click some local variable - Refactoring - Rename Local Variable - Change the name and press ok.
    You will get an error message "yxz appears to be not a local variable"

  • RELEVANCY SCORE 2.70

    DB:2.70:N81 8gb Issues (Reset On Wifi, Speakers Background... sf


    I have noticed one serious bug, and few minor software glitches.

    1. When I try to connect to local Wireless Network, WEP secured, I enter the key in all CAPS. Phone tries to connect and RESETS.

    I have tried many times, it resets every time. Very unpleasant.

    I have then downloaded the nokia updater software and updated the firmware to the latest version. The same problem remained. Device restarts once I try to connect to the wireless network.

    Then I have tried entering the network wep key in lower case, such as abcde1a instead of ABCDE1A...you get the idea. That works.

    It connects to the network now and does not restart; however, once connected it takes a long time for it to display which network it is connected to on the first screen (lets call it a desktop, I am new to Symbian).

    From whatever I can figure out, if it works with wep key entered lowercase (works really fine) I do not believe it to be a hardware glitch?

    Few more things I noteiced.

    2. I got an application called 'Islamic Organiser' preinstalled. App manager simply refuses to delete it? Software bug?

    3. And the Speakers, they seem too loud, which is supposed to be so I guess. However, just prior the music starts you can hear background speaker noise. Is this supposed to happen? Once the music starts, you can not notice it anymore and music quality is good.

    4. SMS sorting by date seems to be broken, sorts by something else. Looks like SORT BY TYPE actually sorts by date. I might be wrong though.

    So, basically, it is a great, really great phone; with above mentioned issues.

    Thank you all for reading!

  • RELEVANCY SCORE 2.70

    DB:2.70:Data Corruption Bug - Damage 1p


    Greetings all,
     
    Here's a good example of the internet havoc that the data corruption bug is causing.
     
    http://blogs.zdnet.com/hardware/?p=1499
     
    There are many other stories out there echoing the same sentiment.
     
    I'll say it again, this product is dead if the bug is not squashed soon.  Methinks June is really too late.
     
    All you 64-bit users out there, you might not have much longer to worry about the lack of connector software.  Pretty soon there won't be a WHS box to worry about connecting with.
     
    Then again, I'm a gloomy gus by nature.
     
    Cheers,

    DB:2.70:Data Corruption Bug - Damage 1p

    As far as I can tell it'll still be the best solution in June. 

  • RELEVANCY SCORE 2.69

    DB:2.69:Re: Memory Leak Doubt 1s


    Can i say that this is a bug in Java 1.5?Could be.

    It's hard to say without more context. If some other method in that class is using the ArrayList, then no, it's not necessarily a bug. It might be that the class is designed to add items to the list when they're constructed, and be able to use them for the life of the program. If that's the case, then it's not a bug.

    DB:2.69:Re: Memory Leak Doubt 1s

    I agree with "vanilla_lorax". You havent given the full context in which you use this class. So we could continue the debate as to whether this is really a memory leak once you post the context.

    On the first look it does seem to be a memory leak, but conclusions can be drawn if you could give more information on the class and how you have used the same in your application.

  • RELEVANCY SCORE 2.69

    DB:2.69:Ciscoworks Bug Toolkit - Bug Summary Report 88



    Just hoping someone might be able to help me see what's wrong here. So I know for a fact that one of the IOSs I have deployed has a bug that I've had activated previously. This IOS is on several routers, however when I run a Bug Summary Report, it reports that there are no bugs on any of my IOSs. What might I be doing wrong here?

    DB:2.69:Ciscoworks Bug Toolkit - Bug Summary Report 88


    That fixed my problem. If I change the date back I can get those statistics. Thanks for your help.

  • RELEVANCY SCORE 2.69

    DB:2.69:Could Be Bug: Copy Files From Mapped Drive To Eg Program Files Folder m9


    When copying from a mapped drive, eg named p: that is linked to \\mysever\program, to the C:\Program Files folder, I get an error message, stating:

    Destination Folder Access Denied. You'll need to provide administrator permission to copy to this folder.After pressing Continue, I get a new error message, stating: Location is not available and p:\ refers to a location that is unavailable.It could be on a hard drive on this computer, or on a network. Check
    to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location.
    This happens although I changed the User Account Control Settings to Never Notify.

    DB:2.69:Could Be Bug: Copy Files From Mapped Drive To Eg Program Files Folder m9

    Hi,
    I have exactly the same problem, I even have a mapped drive named p: that is linked to program folder on the server, and I get exactly the same messages and errors. I'm using Win8Pro downloaded January 29th so this is the real thing, no beta version. I can
    copy to my user folder but not the C:\ or to e.g. C:\Program Files. I also have a program to produce invoices which uses a logo that is situated on that same mapped drive p:. The program cannot print the invoice because it cannot find the external file
    (i.e. P:\logo\logo.wmf).
    Have you found any solution to this problem?

  • RELEVANCY SCORE 2.69

    DB:2.69:Ann: Xml Parser For Java V2.0.2.5 8x


    --
    The v2.0.2.5 of the XML Parser for Java is now available for
    download. The following features and bug fixes are included:

    Conformance to the XSLT/XPATH October PR.
    Support for internationalized error messages has been added. The
    locale can be set using setLocale(java.util.Locale) function in
    XSLProcessor, SAXParser, and DOMParser.

    New APIs in XMLNode class:
    value-of(String pattern)
    selectNodes(String pattern)
    selectSingleNode(String pattern)
    selectSingleNode(String pattern, NSResolver ns)

    New API in XSLStylesheet class
    setParam(String param, String value)

    Bug fixes:
    Bug #957465: Missing a way to set stylesheet-level param-
    variables
    Bug #962290: selectNodes() improvements
    Bug #1033472: Html output prints empty elements for non-empty
    elements
    Bug #1040717: Character entity for greater that in html output
    style
    Bug #1046003: Bug is parsing text nodes larger than 16K
    Bug #1051671: 'xsl:namespace-alias' not supported
    Bug #1052387: Disable-output-escaping doesn't flush while
    printing
    Bug #1053273: 'xsl:message' terminate attribute not supported
    Bug #1058004: No access to media-type and encoding on xsl:output
    Bug #1058008: xsl:version attribute not copied to result
    Bug #1061159: Exclude-result-prefixes not supported
    Bug #1067965: Bug in Non-validating parser while reading QNames
    in DTD

    This is the fifth production patch release for v2.

    --------------------------------
    Oracle XML Team
    http://technet.oracle.com
    Oracle Technology Network
    null

    DB:2.69:Ann: Xml Parser For Java V2.0.2.5 8x

    --
    The v2.0.2.5 of the XML Parser for Java is now available for
    download. The following features and bug fixes are included:

    Conformance to the XSLT/XPATH October PR.
    Support for internationalized error messages has been added. The
    locale can be set using setLocale(java.util.Locale) function in
    XSLProcessor, SAXParser, and DOMParser.

    New APIs in XMLNode class:
    value-of(String pattern)
    selectNodes(String pattern)
    selectSingleNode(String pattern)
    selectSingleNode(String pattern, NSResolver ns)

    New API in XSLStylesheet class
    setParam(String param, String value)

    Bug fixes:
    Bug #957465: Missing a way to set stylesheet-level param-
    variables
    Bug #962290: selectNodes() improvements
    Bug #1033472: Html output prints empty elements for non-empty
    elements
    Bug #1040717: Character entity for greater that in html output
    style
    Bug #1046003: Bug is parsing text nodes larger than 16K
    Bug #1051671: 'xsl:namespace-alias' not supported
    Bug #1052387: Disable-output-escaping doesn't flush while
    printing
    Bug #1053273: 'xsl:message' terminate attribute not supported
    Bug #1058004: No access to media-type and encoding on xsl:output
    Bug #1058008: xsl:version attribute not copied to result
    Bug #1061159: Exclude-result-prefixes not supported
    Bug #1067965: Bug in Non-validating parser while reading QNames
    in DTD

    This is the fifth production patch release for v2.

    --------------------------------
    Oracle XML Team
    http://technet.oracle.com
    Oracle Technology Network
    null

  • RELEVANCY SCORE 2.69

    DB:2.69:5800 Xm Sms Bug?? kc



    whenever i send a message to multiple people at once, it is billed as 3 times in my monthly bill. It is also not the case where msg might have been more than 160 chars. i even tried with msg=10 chars to multiple people, but still it is billed as if 3 msgs were sent to the same person.

    i first thought it to be a network/operator issue, but it is not the case as one of my friends with a different operator is also facing this issue. Also, this problem does not occur when there is only a single reciepient.

    Please let me know if anyone else is also facing this issue or if anyone has a soln to this. I have at present V31 installed on my device.

    DB:2.69:5800 Xm Sms Bug?? kc


    It is not a problem......... well maybe to you it is...............

    You get billed for each recipient. I send messages to both my kids at the same time frequently and always get charged for 2 messages. That's the way the system works...........




    If I have helped you with your problem in some way, please take a little time and hit the kudos button in my post. Without your feedback, I don't know if I am being helpful or should just be put out to pasture.

  • RELEVANCY SCORE 2.69

    DB:2.69:Shell Shock Bug 1p



    Not being clued up on unix/linux I was wondering if anyone could say whether the Aruba equipment might be vulnerable to the shell shock bug?







    Solved!
    Go to Solution.

    DB:2.69:Shell Shock Bug 1p


    I see for airwave that there are two software versions listed on the bulletin. Does that mean that both fix the bug? We upgraded to 8.0.4.1 and the application is almost unusable. I would love to roll back to 7.7.13.

    Thanks for the info.

  • RELEVANCY SCORE 2.69

    DB:2.69:Problem With Hide.Hideininspector k9



    I asked a very similar question a while ago. Seems that it's a bug, because I never really got an answer (other than it might be a bug), and I'm 99.9% sure that the code I had should have worked. I sent in a bug report, but the only answer I got was that they would look into it, and in the mean time use EditorUtility.CreateGameObjectWithFlags, which worked for my situation, but may or may not for yours.

    DB:2.69:Problem With Hide.Hideininspector k9


    I know this is a really old Question but I encountered a similar issue with Hide.HideInInspector and Hide.HideInHierarchy. Basically they would not function but Hide.NotEditable would work fine. I think my problem came from putting the line in the OnEnable method. After restarting Unity it would work just fine.

  • RELEVANCY SCORE 2.69

    DB:2.69:Gc Spin Fix For 5.0 Bug (6262235 Or 2128236)... When? za


    We're interested in the fix for bug:

    Bug ID: 6262235; Synopsis: NMethodSweeper::sweep takes a long time (mostly in nmethod::cleanup_inline_caches)

    on Java 5. The bug is apparently fixed on 1.4.2_09 according to the rel notes and the bug itself notes (1.4.2_09(b02) (Bug ID:2125853)) blah blah. But another bug Bug ID: 2128236 notes that it is fixed in "5.0u6(b02)".

    Can someone tell me what that nomenclature means "5.0u6(b02)"? (Seems like it might be saying "coming in 5.0 update 6..)

    Chris

  • RELEVANCY SCORE 2.69

    DB:2.69:Re: Documentation Bugs 7z


    The MSDN Product Feedback Center has moved to "Connect".  It might be just me, but I could not find a place to submit the bug/suggestion.Anand, could you post a new link for bug/suggestion submittal?

    DB:2.69:Re: Documentation Bugs 7z

    The MSDN Product Feedback Center has moved to "Connect".  It might be just me, but I could not find a place to submit the bug/suggestion.Anand, could you post a new link for bug/suggestion submittal?

  • RELEVANCY SCORE 2.69

    DB:2.69:[Bug] Proximity Sensor Not Working On Voice Calls For Nexus 4 3c



    Info: LG Nexus 4, stock Android 4.2.1, WiFi (home/office network) using Skype v3.0.0.6181

    Bug: When making voice calls the screen stays on which kills the battery. Any ideas when a fix will be implemented?

  • RELEVANCY SCORE 2.69

    DB:2.69:Dpm 2012 Sp1 Online Recovery Points Not Working 8a


    Hi,
    I've configured a data source (Hyper-V VM) to have a online recovery point created everyday but the job is not starting. I can trigger it manually and usually goes through fine. Any idea what might be causing this? A bug or misconfiguration?
    Thanks!
    Mathieu

    DB:2.69:Dpm 2012 Sp1 Online Recovery Points Not Working 8a

    Hi,

    Are you seeing any alerts in the event viewer. Like policies are out of sync for the DPM server/policies inconsistent.

    -- Thanks Venkata Praveen[MSFT] This posting is provided AS IS with no warranties, and confers no rights.

  • RELEVANCY SCORE 2.68

    DB:2.68:Re: "Can't Assign A Second Value To A Blank Final Variable" In Catch Block 3k


    What do you mean "A might exist"?I wanted to tell "Someshing might exist" but it cannot.

    So here's the problem:
    somewhere in your code you set iWidth to be greater
    than mSeqTable.length. So thereis a bug... in
    your code.Hint: iWidth is a data variable (not hardcoded). From your words I can make a conclusion that bug-free programs do not need exceptions, exceptions were invented to support buggy programs :o) Why do you think there is a bunch of IOExceptions?

    The fact that iWidth can be out of borders is not a bug. The bug is in the compiler that states that final taps variable is assigned 2nd time in the catch block. As you has got many Dukes I think you should understand this.

    DB:2.68:Re: "Can't Assign A Second Value To A Blank Final Variable" In Catch Block 3k

    I've got an idea how to cheat the compiler to force it to accept correct java code:

    class CompilerException {
    private static String javaCompilerSux(BufferedReader br) {
    try {
    return br.readLine();
    } catch(IOException e) {
    return e.toString();
    }
    }
    public static void main(String[] args) {
    final String s;
    final BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
    s = javaCompilerSux(br);
    }
    }But this needs for additional procedure :o(

  • RELEVANCY SCORE 2.68

    DB:2.68:Capture&Nbsp; "The Disk Is Full" Error On Network Drive 87


    Using Final Cut Pro 6.01 we are capturing and running in to some variation on the 2GB file size limit. Unfortunately, it's none of the usual suspects. Using CIFS to network mount a 2.8TB array. Copying large (10gb+) to and from the drive with the Finder is not a problem. But when we capture with final cut it stops right around the 2GB limit and complains about the disk being full.

    Any idea what this might be? Is it a final cut bug?

    DB:2.68:Capture&Nbsp; "The Disk Is Full" Error On Network Drive 87

    Yeah, we can capture locally then copy the files manually with the Finder just fine. It definitely feels like a network issue of some sort, but I think its final cut related. At first I thought it may be that for some reason it can't have open files over the network more than 2GB, but using the same OS 10.4 at home I can do the same thing using different capture software to a CENTOS 4 box with the same sort of RAID.

    It's got to be a Final Cut bug. The question is whether there is a workaround. I suppose I could have the editors set the max file size to 2GB or just keep copying the files.

    I hope the fix the big soon.

  • RELEVANCY SCORE 2.68

    DB:2.68:*** Important Mln Announcement*** f7


    *** Important MLN Announcement***

    Jammers on MLN Fans Only:
    Jammers (Highlight to read)A game for MLN called Haul will be put on a Rank 10 Networkers Page! Someone will be on MLN!OurRevival Topic might work now! YAY! Please note that MLN might not be updated because of this. But it might! Remember Ninjago? So We Might Have A Chance!

    DB:2.68:*** Important Mln Announcement*** f7

    Is there any proof? If I remember MLN has not updated for 2 years... IS this merely a prank?



    ~Brick~

  • RELEVANCY SCORE 2.68

    DB:2.68:Flex Content Holder Is Not Animated 8c



    Hi,

    I found a bug, might be at adobe sdk, it realted to both flex and flash forums, so to avoid duplication I only posted it once.

    Please review

    DB:2.68:Flex Content Holder Is Not Animated 8c


    Hi,

    I found a bug, might be at adobe sdk, it realted to both flex and flash forums, so to avoid duplication I only posted it once.

    Please review

  • RELEVANCY SCORE 2.68

    DB:2.68:Wireless Network Stability m3



    Running WISMs on 6.0.196 and 4404's on 6.0.196 and seeing many wireless disconnects.

    TAC has released to me 6.0.197.10 but still experiencing drops and another unidentified bug that I'm waiting to hear back on.

    Anyone running 6.0.196 and seeing the same? Might be downgrading from 6.0.196 to 5.2.193 this weekend.

    Kind of at a loss and need to get this resolved.

    DB:2.68:Wireless Network Stability m3


    Hello Chris,

    Please mark the Question as Answered, if the provided information is correct and it helped. By doing that others can take benefit as well.

    Thanks,

    Vinay Sharma

    Community Manager – Wireless