• RELEVANCY SCORE 3.32

    DB:3.32:Identity Synchronization For Windows - Creating Sun Directory Source ma




    I installed IdSync. for windows on a solaris box. Until Core installation no problems. I tried creating Sun Directory Source and while saving I get this list of erros:

    The configuration is invalid. A Configuration must have at least one Synchronization User List.
    The configuration is invalid. A configuration must have atleast one Synchronization User List for each Sun ONE Directory Source
    The configuration is invalid. A configuration must have atleast one Windows Directory Source.

    I didn't save the configuration after these errors. I tried running ./idsync prepds to get rid off a warning message before. I installed core with its own DS. My source DS is a separate instance.

    Couple of concerns:

    Is the Naming Context selected while creating the source points to configuration directory source or the actual directory source ?? (Though i tried both the servers)
    The preferred Master server was set to Directory source which is not the configuration directory ??
    I dont know why is it asking me to create synchronization user list and windows directory source before creating a source ??
    I tried creating Windows AD source and getting the same errors, except that its asking me to create SunONE directory source first ??

    Any suggestions please ??

    Thanks,
    Sunil.

    DB:3.32:Identity Synchronization For Windows - Creating Sun Directory Source ma

    Sunil,

    I suggest you to study the Installation and Configuration Guide. Basically, you have not completed the configuration that is why you see the "Configuration invalid" messages.

    You are only supposed to execute 'idsync prepds' after you successfully saved the initial configuration.

    Answers to your concerns:
    Naming Context: this is the naming context of the database where the synchronized users reside.

    The preferred master server and the configuration directory server does not have to be the same directory server instance. In fact, it is better to setup a separate directory server instance for the configuration.

    I agree, that the console could be more user friendly. The easiest approach is to first create the directory sources, then setup the synchronized attributes and the last thing is to create a synchronization user list. Once you have all this, you can attempt to save the configuration. Any errors reported must be corrected, otherwise you cannot save the configuration.

    Bertold

  • RELEVANCY SCORE 3.31

    DB:3.31:Ipccx Directory Service Synchronization Error a8





    Hi,

    We have an IPCC Express 4.0(5a) cluster.

    When I try to synchronize Directory Services from Cisco Desktop Administrator, a message prompts me that synchronization completed with errors.

    What may be the reason? Where can I troubleshoot this (log files..)?

    Thanks

    DB:3.31:Ipccx Directory Service Synchronization Error a8


    first, run C:\Program Files\Cisco\Desktop\bin\postinstall.exe to verify the CallManager IP address is correct.

    if that didn't fix it, run C:\Program Files\Cisco\bin\CRSAdminUtil.exe to synchronize CCMService password.

    if that didn't fix it, open a TAC case.

    The logs are C:\Program Files\Cisco\Desktop\log\DirAccessSynSvr*.*

  • RELEVANCY SCORE 3.25

    DB:3.25:Cross Forest Active Directory Enterprise Resource Pool Synchronization p9




    Hi all!
    We have two domains (the domainA - 2003 and the domainB - 2008) with two-way trust.
    In domainA there is a local group with users from the domainB.
    We have Sharepoint Server 2010 Project Server 2010 with synchronization Active Directory Enterprise Resource Pool Synchronization with local group of the domainA. Synchronization worked until SP1, after installing SP1 the error appear:
    Some user data was not updated because synchronization of the Enterprise Resource Pool partially failed on 12/9/2011 at 8:41 AM. To identify where the errors occurred,
    see the Windows event log on the server.
    event 7221- Active Directory Synchronization cannot resolve reference to a foreign security principal in a remote forest or external domain. This could be because the object does not exist, the user does not have permission or because of a communication
    problem between the project server application server and Active Directory. Distinguished Name : LDAP://xxx.domainA.ru/CN=S-1-5-21-1003149109-1081597430-2277648077-1107,CN=ForeignSecurityPrincipals,DC=xxx,DC=domainA,DC=ru

    I've deployed a new test server with the test domain and two-way trust relationships and new test server with Sharepoint 2010 Project 2010.

    The synchronization work fine.

    I has installed SP1 for Project 2010, the synchronization doesn't work.

    I have tried to install 2011 August CU and 2011 October CU but synchronization doesn't work.

    Are there any suggestions? Thanks in advance.

    DB:3.25:Cross Forest Active Directory Enterprise Resource Pool Synchronization p9

    This issue appear after SP1 and if trust type is external trust, to resolve need change trust to forest trust.

  • RELEVANCY SCORE 3.21

    DB:3.21:Outlook Synchronization Errors__ ak


    Outlook synchronization error: 80040600-501

    DB:3.21:Outlook Synchronization Errors__ ak


    Are you using outlook connector to send and receive emails?
    If yes try uninstalling and reinstalling Outlook connector and check if this helps.
    To download Outlook connectors check the following link:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=9A2279B1-DF0A-46E1-AA93-7D4870871ECFdisplaylang=en
    If this fails to fix this error create new profile and configure the email account in connector and check if it helps
    Check the following link for more help on how to create a new profile in outlook:
    http://office.microsoft.com/en-us/outlook/HA101923281033.aspx

  • RELEVANCY SCORE 3.19

    DB:3.19:Directory Sync Server Setup 37


    Hi,
    We have 2 DC's ,2 CAS server ( in Windows NLB) ,2 mailbox servers in DAG environment. asDirectory Synchronization serveris a mandatory equirement for hybrid deployment ... can we install it on one of the DC's or CAS server.

    What are the steps to follow for this installation ?
    As the directory sync server will sync all the users in onprem to O365 and viceversa ... will Microsoft charge for user sync in O365 ?

    Thanks

    DB:3.19:Directory Sync Server Setup 37

    Hi,
    Did you try the suggestion above?
    And how about the result?
    If any update, please post it.
    Thanks.Niko Cheng
    TechNet Community Support

  • RELEVANCY SCORE 3.10

    DB:3.10:Using Installation Directory As A Restore? 99





    ...

  • RELEVANCY SCORE 3.02

    DB:3.02:Ldap Synchronization Errors xk



    Hi,

    We have successfully configured LDAP with Lotus domino Directory server.

    After having configured the LDAP Connector, I can connect NW2004SSR1(BI 70) to the Directory Server.

    We are following steps from

    http://help.sap.com/saphelp_nwes70/helpdata/EN/c9/6e4117849943728351b86979abf092/frameset.htm

    In Mapping we are giving only the following.

    In LDAPMAP Transaction we have mapped the following

    1)USERNAME:BAPINAME:cn

    2)ACTIVITYGROUPS:AGR_NAME:CompanyName

    3)LOGONDATA:USTYP:C using function Module MAP_CONSTANT

    In sychronization as per the documentation we cant do the step

    5)Set the Import indicator to define, from the point of view of the

    ABAP system, that the objects are imported during synchronization.

    6)In the report RSLDAPSYNC_USER (transaction SA38), when I try to synchronize the LDAP Connector with the Directory Server, it is looking in my user master records.how do i configure my LDAP users to login to my SAP System. Please help me this regard.

    Thanks Regards,

    Satish.Kasaraneni

    DB:3.02:Ldap Synchronization Errors xk


    Hi,

    We have successfully configured LDAP with Lotus domino Directory server.

    After having configured the LDAP Connector, I can connect NW2004SSR1(BI 70) to the Directory Server.

    We are following steps from

    http://help.sap.com/saphelp_nwes70/helpdata/EN/c9/6e4117849943728351b86979abf092/frameset.htm

    In Mapping we are giving only the following.

    In LDAPMAP Transaction we have mapped the following

    1)USERNAME:BAPINAME:cn

    2)ACTIVITYGROUPS:AGR_NAME:CompanyName

    3)LOGONDATA:USTYP:C using function Module MAP_CONSTANT

    In sychronization as per the documentation we cant do the step

    5)Set the Import indicator to define, from the point of view of the

    ABAP system, that the objects are imported during synchronization.

    6)In the report RSLDAPSYNC_USER (transaction SA38), when I try to synchronize the LDAP Connector with the Directory Server, it is looking in my user master records.how do i configure my LDAP users to login to my SAP System. Please help me this regard.

    Thanks Regards,

    Satish.Kasaraneni

  • RELEVANCY SCORE 3.00

    DB:3.00:Handling Td To Cmdb Synchronization Errors d3



    I am looking for some help on how to properly handle the TD to CMDB synchronization errors, as well as undertand the sync process/components a little better so I can troubleshoot better.

    Current problem I have right now is that CMDB sync produces errors on some machines, and I am not sure how to go about trobleshooting. Bigger problem is that the sync process stops if it hits an error with one computer/page. So if I have 4000 machines/pages, and if it hits an error with the first machine, then that means the other 3999 machines do not get synced either, making fixing the error even more urgent. So my questions:

    1. Does one sync page (C:\Program Files\BMC Software\Discovery\pages) equal one machine?

    2. If sync fails on one page, can I move this page out of this directory so that the sync process can be restarted and progressed? And move the page back into the directory after whatever issue is fixed?

    3. How does everyone go about troubleshooting/fixing the issue when error occurs during the sync?

    4. Any helpful information regarding what it is, what information it holds, where it is located, and how information gets updated for the below items (I got this from reading about Resetting the CMDB Sync):

    - Synchronization mapping table

    - List of candidates for the next synchronization

    - Synchronization pages

    Thank you.

    DB:3.00:Handling Td To Cmdb Synchronization Errors d3


    Thank you Amit for your detailed help. Sorry, but I just saw that you had responded while going through some of my old posts.

    I have not had issues with the sync since I had posted these questions, so have not really had the chance to go and dig deeper, but the information you have provided is very helpful in understanding the process.

    I guess only thing is that in all my cases where the sync failed for a particular page, that it didn't just skip the erroneous one and move forward with the next page, but it just stopped the sync, which I do not think is by design.

    Thanks!

  • RELEVANCY SCORE 3.00

    DB:3.00:Updating Activedirectory Thumbnail Attribute With Sharepoint Userprofile Picture Property mc


    Hi,
    I am trying to upload picture into the sharepoint user profile for a specific user and trying to sync the user profile (Picture property) with Active Directory thumbNail Attribute.

    I have performed the below mentioned activities.Pe
    1. Create a User Profile Service Account with Replicating Directory Changes Permissions within the Domain.
    2. The User Profile Service Account (a.k.a. Synchronization Account) has been given thePermission to Create Child Objects Write Permissionsin AD at the domain level for the specific User within the AD.
    4. Mapping the User Profile Property (i.e. Picture ) to the thumbNail Attribute.
    5. Set the Direction of the Picture Property to Export.
    6. Ran a Full Synchronisation.
    7. It gave out an error saying within the Event Veiwer

    The management agent MOSSAD-PORTAL-ADSYNC-CON step execution completed on run profile DS_EXPORT with errors.
    Additional Information
    Discovery Errors : 0
    Synchronization Errors : 0
    Metaverse Retry Errors : 0
    Export Errors : 1
    Warnings : 0
    User Action
    View the management agent run history for details.

    8. It also gave me an error saying
    C:\Program Files\Microsoft Office Servers\14.0\Synchronization Service\UIShell\miisclient.exe - Synchronisation Service Manager

    Insufficient access rights to perform the operation.
    permission-issue
    for the same user profile for the Picture Export.
    Any help would be appreciated.
    Thanks Ram

    DB:3.00:Updating Activedirectory Thumbnail Attribute With Sharepoint Userprofile Picture Property mc

    The Profile Service account i.e. the account provided while creating the Active Directory connection to populate the OUs needs permissions to write on user objects and not the account under which the User Profile Synchronization/FIM Client service runs.

  • RELEVANCY SCORE 2.98

    DB:2.98:Thread: Directory Association Questions 1k


    I\'m planning on upgrading my GW2012 server to 2014 this coming weekend and am in the final stages of working in my testing environment. My upgrade is going successful but I\'m having a couple of behavioral questions in regards to the Directory Association step that I\'m mildly concerned about.

    In my first upgrade attempts I discovered that my LDAP User Synchronization job was not configured correctly so that I had the warning post-upgrade indicating that directory association was not successful. I resolved this issue and now when I test my upgrade I do not get this notice. At this point immediately post-upgrade, if I look at my Users list I see the correct icon indicating that the user is associated with a directory account, but I can also go to Directory Associations, perform a search against eDirectory and the search results tell me that none of my users are associated. Should I believe the post-installation user\'s list or should I run the Directory Association just to be safe?

    That leads me to my second question, when I do run the Directory Association, each time I\'ve run it I have the same 10 users experience an error, which when I click on the error\'s details I get a null javascript. At that point if I update the Association list it indicates that all of my users are now associated. Is this anything to worry about since it appears to associate accounts, or how would I find out what is causing my errors after closing the screen after the initial association? Thank you

    DB:2.98:Thread: Directory Association Questions 1k

    Originally Posted by mblackham


    So, for an update process, after the update, if you want to retain the user associations to eDir, it\'s a good idea to kick off a Sync process. You can do this by going to the directory object in GW admin console | System | LDAP Servers. Select the directory object that was created by the update, and there is a \'SYNC\' button at the bottom. This fires off a msg to the MTA to perform a dir Sync outside of his normal Scheduled Events timeframe



    I did this process after my last upgrade test and I get prompted with the option to write the internet addresses to the system address book (or something like that), and I receive a message that there was an error on 14 accounts. Is there a way to find detail on which accounts had the error? I was searching the interface and wasn\'t having any luck finding details, as well as the MTA log file. But I might not have recognized what I was supposed to be looking for.

  • RELEVANCY SCORE 2.95

    DB:2.95:Password Sync In Active Directory z3


    what is password synchronization in oim10g

  • RELEVANCY SCORE 2.95

    DB:2.95:Directory Synchronization Tool Id: 1010 11


    Hello,
    I have installed directory synchronization tool with full compliance of requirements, and I have recieved the following error in the event viewer.
    Source: Directory Synchronization
    Id: 1010
    Description: We were unable to convert some or all identity references.
    Someone knows why I recieved this message?

    Thanks in advance.

    DB:2.95:Directory Synchronization Tool Id: 1010 11

    Is this the right tool? This forum is for the Microsoft Online Directory Synchronization Tool, not theFOPE Directory Sync Tool.

  • RELEVANCY SCORE 2.95

    DB:2.95:Message Queue For Identity Synchronization 1s


    I want to install Identity Synchronization on Windows 2003. I installed Directory server and now I tried to install the message queue. When I launch the setup.bat file, a pop-up says just:
    1158:

    I don't know why I can't start the installation :-((((
    Can you help me?
    Thank you very much.
    Mary

    Edited by: afiordipelle on Nov 19, 2007 8:19 AM

  • RELEVANCY SCORE 2.95

    DB:2.95:Installation Errors 81


    installation errors

  • RELEVANCY SCORE 2.93

    DB:2.93:Indentity Synchronization For Windows - Configuration Help !! fj


    Don't know what I am skipping... but I get stuck with no Domain Controllers showing up in the pick list, when configuring an Active Directory Resource.

    I am using DS 5.2.P4 on Windows 2003 Sp1 server, along with Indentity synchronization for windows (ISW) 1 2004Q3 SP1.

    I have the installation manaul (see link below) and can not get past step 6 of creating an Active Directory Source, becuase no Domain Conroller show up in the pick list, nor can I specify one. I have verified that one of the Domain Controllers is configured as Single Master Operations Role in the AD.

    http://docs.sun.com/source/817-6199/Ch4_ResourceConfig.html

    Any help on this matter would be greatly appreciated.

    Thanks,

    DB:2.93:Indentity Synchronization For Windows - Configuration Help !! fj

    Don't know what I am skipping... but I get stuck with no Domain Controllers showing up in the pick list, when configuring an Active Directory Resource.

    I am using DS 5.2.P4 on Windows 2003 Sp1 server, along with Indentity synchronization for windows (ISW) 1 2004Q3 SP1.

    I have the installation manaul (see link below) and can not get past step 6 of creating an Active Directory Source, becuase no Domain Conroller show up in the pick list, nor can I specify one. I have verified that one of the Domain Controllers is configured as Single Master Operations Role in the AD.

    http://docs.sun.com/source/817-6199/Ch4_ResourceConfig.html

    Any help on this matter would be greatly appreciated.

    Thanks,

  • RELEVANCY SCORE 2.93

    DB:2.93:Outlook Synchronization Error Archive Folder f1


    I have been receiving synchronization errors when Outlook tries to sync the Archive folders.

    DB:2.93:Outlook Synchronization Error Archive Folder f1

    Hi Brantley,
    Thank you for the reply.
    Since you are working with Outlook on Exchange server, your query would be better addressed in the forum link provided below:

    http://social.technet.microsoft.com/Forums/en-US/exchangesvrclients/threads

    Thanks.

  • RELEVANCY SCORE 2.93

    DB:2.93:Optimizing Initial Synchronization On Reinstall Of Office 365 Directory Synchronization cx


    All,

    Just published an Office 365 DirSync Wiki dealing with reinstallation.
    Optimizing Initial Synchronization on Reinstall of Office 365 Directory Synchronization:
    http://community.office365.com/en-us/w/domains_in_office_365/optimizing-initial-synchronization-on-reinstall-of-office-365-directory-synchronization.aspxTimothy P Macaulay, MCSD, MCSD.NET, MCAD, MCP

  • RELEVANCY SCORE 2.88

    DB:2.88:Errors While Installation "Failed To Start Directory Server Instance" cj


    hi
    i was trying to install sun DS 6.3 in my system,everything is going good but while creating directory instance i get errors saying Unxpected error
    "FAILED TO START DIRECTORY SERVER INSTANCE"
    C:/DSEE/VAR/DSCC6/DCC/ADS
    before that i start up dsccsetup/initialize
    it asks for directory manager password:nnnn
    reenter directory manager password:nnnn
    after that i get the above errors
    at the end it says

    "Software installation is corrupted or incomplete"
    i appreciate if someone can help me in this issue.

    DB:2.88:Errors While Installation "Failed To Start Directory Server Instance" cj

    hi
    i was trying to install sun DS 6.3 in my system,everything is going good but while creating directory instance i get errors saying Unxpected error
    "FAILED TO START DIRECTORY SERVER INSTANCE"
    C:/DSEE/VAR/DSCC6/DCC/ADS
    before that i start up dsccsetup/initialize
    it asks for directory manager password:nnnn
    reenter directory manager password:nnnn
    after that i get the above errors
    at the end it says

    "Software installation is corrupted or incomplete"
    i appreciate if someone can help me in this issue.

  • RELEVANCY SCORE 2.88

    DB:2.88:Configuration Synchronization On Weblogic 91


    Hi experts

    My working flow is:
    - installation of my application on managed server (using domain template)
    - configuration of my application (from client). Now the config files are stored in domain directory (edited by the application itself).

    Then I want to add another managed server with this application deployed and I want the existing configuration to be applied to this new server too.

    There is some mechanism of configuration synchronization between WLS managed servers.
    How is it performed?
    Is the whole content of the "config" folder synchronized?

    What approach could/should I use?

    Thanks

    DB:2.88:Configuration Synchronization On Weblogic 91

    Hi experts

    My working flow is:
    - installation of my application on managed server (using domain template)
    - configuration of my application (from client). Now the config files are stored in domain directory (edited by the application itself).

    Then I want to add another managed server with this application deployed and I want the existing configuration to be applied to this new server too.

    There is some mechanism of configuration synchronization between WLS managed servers.
    How is it performed?
    Is the whole content of the "config" folder synchronized?

    What approach could/should I use?

    Thanks

  • RELEVANCY SCORE 2.88

    DB:2.88:Dirsync.Exe Install Error p1


    After uninstalling Windows Azure Active Directory Sync followed by a reboot, I started dirsync.exe, and it fails with:
    The install was unable to setup a required component.
    I have found the following entries in Event Log/Administrative Events:
    Event 5170, MSSQL$MSONLINE
    The description for Event ID 5170 from source MSSQL$MSONLINE cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component
    on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:

    C:\Program Files\Microsoft SQL Server\MSSQL11.MSONLINE\MSSQL\DATA\FIMSynchronizationService.mdf
    Event 10005, MsiInstaller
    Product: Forefront Identity Manager Synchronization Service -- Error 25009.The Forefront Identity Manager Synchronization Service setup wizard cannot configure the specified database. CREATE DATABASE failed. Some file names listed could
    not be created. Check related errors.Cannot create file 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSONLINE\MSSQL\DATA\FIMSynchronizationService.mdf' because it already exists. Change the file path or the file name, and retry the operation. hr=0x8023044a
    Event 0, Directory Synchronization
    The Synchronization Engine installation returned error code 1603. Please try the installation again, and if this error persists, contact Technical Support.
    Event 0, Directory Synchronization
    The Synchronization Engine install returned FAIL. See the event logs for more detailed information.
    Event 0, Directory Synchronization
    Failed to uninstall the synchronization service. Error code:Could not find C:\Program Files\Windows Azure AD Sync\Microsoft.Online.DirSync.Scheduler.exe. Please uninstall and reinstall the Windows Azure Active Directory Sync tool. Log
    off and back in and then run the uninstallation again. If the error persists, contact Technical Support.
    Event 0, Directory Synchronization
    The Synchronization Engine Database was not removed. SQL Error (Cannot drop the database 'FIMSynchronizationService', because it does not exist or you do not have permission.).
    Event 10010, RestartManager
    Application 'C:\Program Files\Windows Azure AD Sync\UnInstallDirectorySync.exe' (pid 2072) cannot be restarted - Application SID does not match Conductor SID..
    Event 10010, RestartManager
    Application 'C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\x64\ScenarioEngine.exe' (pid 3024) cannot be restarted - Application SID does not match Conductor SID..
    Event 10010, RestartManager
    Application 'C:\Config.Msi\5e9da.rbf' (pid 3024) cannot be restarted - Application SID does not match Conductor SID..
    Event 10010, RestartManager
    Application 'C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\SQLServer2012\setup.exe' (pid 2756) cannot be restarted - Application SID does not match Conductor SID..
    Event 10010, RestartManager
    Application 'C:\Program Files\Windows Azure AD Sync\UnInstallDirectorySync.exe' (pid 2072) cannot be restarted - Application SID does not match Conductor SID..
    Event 10010, RestartManager
    Application 'C:\Users\ADMINI~1.EXI\AppData\Local\Temp\2\{09C5886B-5704-4BF2-8037-5B77E85DD283}\SETUP.EXE' (pid 2272) cannot be restarted - Application SID does not match Conductor SID..
    Any hints ?

    DB:2.88:Dirsync.Exe Install Error p1

    Probably your issue is solved and gone, but since other people may run into it and I was not able to find any resolution anywhere, I will post what happened in my case here.
    It appears that my issue was caused by me installing the Sign In Assistant before I actually tried installing Dirsync. So, once I actually tried installing dirsync I received an error. I removed the Sign In Assistant and then tried installing again and I
    found myself in your situation, with exactly the same Event IDs that you posted. There was nothing in appwiz.cpl so I can try installing whatever was installed in the failed installation from before removing the Sign In assistant, so it wasn't a pretty situation.
    I managed to solve the issue by doing the below:
    -Removed the local user account that Dirsync has created previously- user looks like AAD_xxxxxxxxx
    -Removed all the local FIM groups created by Dirsync previously
    -Remove all instances of SQL Express that were installed. Small note here: I did not use SQL for anything else on the machine, so it was ok for me to do it.

    -Remove all files and folders that were created in C:\Program Files\Windows Azure Active Directory Sync\
    -Restart the installation without trying to install anything before it (Win Azure powershell module or Sign In Assistant) - and its all good
    Another mention for those unaware (like me) - the DirsyncConfigShell.psc1 was removed in the latest version.
    Hope this helps someone and spares them some time and headaches.

  • RELEVANCY SCORE 2.88

    DB:2.88:Identity Attribute Synchonization But No Password Synchronization k9


    I want to synchronize some attributes from SUN directory server 5.2 to Active Directory 2003, but I do not want to synchronize passwords! However, default is the passwords synchronization enabled and is it necessary to use ssl and certificates and the default can not be disabled!

    My question: Can I do synchronization from directory server tot AD without passwords synchronization and ssl? If yes, then how?

    DB:2.88:Identity Attribute Synchonization But No Password Synchronization k9

    there are other products out there that just do attribute sync and no password sync..

    they can also do things like uidnumber generation and shell file execution for each user synced (handy for creatign home dirs etc :) :)

    l8rs!

  • RELEVANCY SCORE 2.87

    DB:2.87:Password Synchronization Between Ad And Sun Directory Server j3


    Hi all,
    i had successful installed the "Sun ONE Directory Server 5.2" and "Identity Synchronization For Windows 1.0", then i started to synchronize the password from AD to Sun One Directory Server, but why the userpassword attribute always showed "{PSWSYNC}*ON-DEMAND*SYNCHRONIZATION*REQUIRED*", what does the on-demand synchronization mean and how to test that if the synchronization work fine? Could you help? Thanks.

  • RELEVANCY SCORE 2.87

    DB:2.87:Meta-Replacement Guide, Data Synchronization ca


    Hello,

    For those that (may) have worked through this guide I have a question.

    In Use Case 1 the basic synchronization of AD to an LDAP directory, installation step 5 states:

    "Load the empty sync form used for data synchronization, this to be called 'Empty Sync Form'"

    Now, I am completely mystified what this means. Totally. Absolutely.

    I have followed thru the previous steps... but what part
    does Empty Sync Form play? The first mention of it is in the installation.

    Any help on Use Case1 of the Meta replacement guide is gratefully accepted.

    DB:2.87:Meta-Replacement Guide, Data Synchronization ca

    hmm i would just leave out that step (the blank form gets used by the proxy user in the idm framework and you've already set that in step 2). my understanding is that the blank form assigned to the proxy user basically does very little, but is required simply because of the way the idm security framework works.

    l8rs

  • RELEVANCY SCORE 2.86

    DB:2.86:Dns Error 4013. No Dns Address Showing On Second Server. Initial Synchronization Not Yet Completed? d3



    Hi,
    Just promoted a server to replicate the main DC and everythings seems ok apart from the DNS.
    When looking at the zones from the second server the DNS zones show no content like it hasnt been replicated at all but when i connect to the server from server one (adding second server into server 1 management console) it shows server 2 has all the computers
    listed. Both server have themselves as the primary (10.***.***.*) and the secondary as each other.
    Is this normal behavour?
    Thanks
    Heres the only error in the log. Event Errors: 4013
    The DNS server is waiting for Active Directory Domain Services (AD DS) to
    signal that the initial synchronization of the directory has been completed.
    The DNS server service cannot start until the initial synchronization is
    complete because critical DNS data might not yet be replicated onto this
    domain controller. If events in the AD DS event log indicate that there is a
    problem with DNS name resolution, consider adding the IP address of another
    DNS server for this domain to the DNS server list in the Internet Protocol
    properties of this computer. This event will be logged every two minutes
    until AD DS has signaled that the initial synchronization has successfully
    completed.

    DB:2.86:Dns Error 4013. No Dns Address Showing On Second Server. Initial Synchronization Not Yet Completed? d3

    Please proceed like that:

    Make sure that all DCs you have are using a single IP address and have only one NIC card enabled (All other NICs should be disabled)Make sure that public DNS servers are configured as forwarders and not in IP settings of DCsMake sure that needed ports for AD replication are opened in both directions. You can use PortQryUI for checks:

    http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls-en-us.aspxMake both DCs you have point to the first DC as primary DNS server
    Once done, reboot the second DC and check if the problem persists or not.
    If it is solved then you can make:

    Every DC points to the other one as primary DNS serverEvery DC points to its private IP address as secondary DNS serverEvery DC points to 127.0.0.1 as third DNS server
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.

  • RELEVANCY SCORE 2.84

    DB:2.84:Directory Synchronization Installation Errors sz


    I have tried to install this on an Windows 2003 Server with over 3.5gb of free space. I am logged in as the network administrator. The errors do not seem to make any sense. The errors are:

    Windows cannot log you on because your profile cannot be loaded. Check that you are connected to the network, or that your network is functioning correctly. If this problem persists, contact your network administrator.

    Product: Microsoft Identity Integration Server -- Error 25009.The Microsoft Identity Integration Server FP1 setup wizard cannot configure the specified database. Invalid object name 'mms_management_agent'. There is not enough space on the disk.
    The Microsoft Identity Integration Server (MIIS) install returned error code 1603.MIIS Install returned FAIL. See the event logs for more detailed information.
    Failed to uninstall the Synchronization Service. Could not find 0\Microsoft.Online.DirSync.Scheduler.exe.

    DB:2.84:Directory Synchronization Installation Errors sz

    Hi Chris,
    I am not familiar with the first error you are experiencing. For the second error, you are getting it for your server isat 3.5GB of spaces remaining.Here are the prerequisites for installing DirSync.Software Perquisites:
    The system must be jointed to a domain in the Active Directory forest that you plan to synchronize with Microsoft Online Serives. Installation onto an Active Directory domain controller is not supported.
    The system must be able to communicate with all domain controllers for all domains in your Active Directory forest.
    Windows Server 2003 x86 with Service Pack 2 or later, or Windows Server 2008 x86 with the latest service pack installed. Installation onto x64 computers is not supported.
    Microsoft .NET Framework version 2.0
    Windows PowerShell version 1.0
    Windows PowerShell version 1.0
    Hardware Prerequisites:
    At least 400MB of available hard drive space for a complete installation of all Directory Synchronization Tool components.
    An additional 400MB of hard drive space is checked before creating the initial SQL 2005 Express Edition database file. Additional space may be required for the Directory Synchronization Tool database (up to 4GB max for SQL 2005 Express Edition).
    Refer to other minimum requirements for SQL 2005 Express Edition.
    http://www.microsoft.com/Sqlserver/2005/en/us/system-requirements.aspx
    Refer to other minimum requirements for ILM 2007 FP1.
    http://www.microsoft.com/windowsserver/ilm2007/default.mspx

    For the remaining errors, you may need to manually clean it out of your server. Check Add/Remove program to see if Microsoft Identity Integration Server is present. Uninstall from there if it is. If its there and still give you error when tried to uninstall, you may need to use the Windows Installer Clean Up utility to remove it.
    TonyMicrosoft Online Technical Support

  • RELEVANCY SCORE 2.84

    DB:2.84:Hosted Exchange With On-Premise Sharepoint, Cannot Synchronize Local Ad Email Address. xj


    We are trying to get our on-premise Sharepoint 2010 installation to pull the email addresses from AD. If we enter the email address via aduc's general tab, the SharePoint profiles successfully update, however we then start receiving directory synchronization
    errors (shown below) from the Exchange online service. I would like to know how we can populate the email field in AD without causing the synch errors.

    Error 012: Unable to update this object in Microsoft Online Services because the proxy address associated with this object in the local Active Directory is already associated with another
    object. Fix this in your local Active Directory.

    DB:2.84:Hosted Exchange With On-Premise Sharepoint, Cannot Synchronize Local Ad Email Address. xj

    Loryan,

    No, we have not had an on-premise instance of Exchange, we've migrated from one online service to Microsoft's. Does extending the schema require a install of Exchange?

    Thanks for you reply! Much appreciated.

    Jeff

  • RELEVANCY SCORE 2.84

    DB:2.84:Cant Connect To Fim Synchronization Service 1z


    Hello,
    I am using a fresh installation of FIM on a virtual server. I am logged in as administrator. When I open the synchronization service manager, I get this error (summarized):
    Cannot connect to synchronization service. (Could be because service is not started or insufficient permissions)

    However, the synchronization service is started. Also, there is no error in the event log!
    I tried assigning all FIM security group memberships to myself but I still get the same error.
    One clue could be that I had to start the service manually. It didn't start on its own after startup but still I found no errors.
    Can someone please tell me how to open the synchronization service manager? Thank you very much.
    Ali

    DB:2.84:Cant Connect To Fim Synchronization Service 1z

    Thanks for all the responses. The problem disappeared on a cloned copy.

  • RELEVANCY SCORE 2.83

    DB:2.83:Ad Sync Issue Event Id 7735 In Project Server 2010 k8


    I have problem with AD sync. In PWA it is showing as 'Some user data was not updated because synchronization of the Enterprise Resource Pool partially failed on 14.12.2012 at 02:08. To identify where the errors occurred, see the Windows event log on the
    server'

    Below is the event log message.

    Log Name: Application
    Source: Microsoft-SharePoint Products-Project Server
    Date: 12/14/2012 2:08:00 AM
    Event ID: 7735
    Task Category: Active Directory Synchronization
    Level: Error
    Keywords:
    Description:
    Standard Information:PSI Entry Point:
    Correlation Id: 84bda0d9-57d7-46eb-8b50-4be4cabe9003

    SSP Name: Project Server
    PSError: NoError (0)
    A resource could not be updated during Project Server Active Directory Synchronization because the supplied windows account name is invalid. Resource GUID: e77957f7-4dd7-4fcc-a802-df44c1c440f5. Resource Name EXTERNAL Ozeki Yohei (Acrovision LLC; AA-DG/PAO-PES-JP).

    1. I updated WRES_AD_GUID value to NULL in MSP_RESOURCES table for affected user, but no success

    2. I also Prevent Active Directory synchronization for this user, even though i am getting the same error.

    Please suggest to fix this issue.

    DB:2.83:Ad Sync Issue Event Id 7735 In Project Server 2010 k8

    I'd also check if the account has been deactivated within AD.

  • RELEVANCY SCORE 2.83

    DB:2.83:Why Am I Getting These Errors? f3


    2005-07-18 05:25:33 3-Critical 0x04E33948 No Ranging Response received - T3 time-out
    2005-07-18 05:25:12 3-Critical 0x0501BD64 SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing
    2005-07-18 05:24:57 3-Critical 0x0501BDC8 SYNC Timing Synchronization failure - Failed to acquire FEC framing
    2005-07-18 05:24:56 3-Critical 0x04E33A10 Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 timeout
    2005-07-18 05:24:56 3-Critical 0x0501BDC8 SYNC Timing Synchronization failure - Failed to acquire FEC framing

    Frequency 651000000 Hz Locked
    Signal to Noise Ratio 34 dB
    Power Level -10 dB

    Upstream Value
    Channel ID 3
    Frequency 34000000 Hz Ranged
    Power Level 43 dBmV

    It all began after a new modem installation.
    http://forums.comcast.net/thread.jspa?threadID=41189



  • RELEVANCY SCORE 2.82

    DB:2.82:Unable To Delete Subscribers From Cisco Unity 4.X mm


    Core IssueIn an attempt to delete a subscriber from Cisco Unity, there are a few errors seen in the application event logs, and subscribers are not deleted.
    Event Type: ErrorEvent Source: CiscoUnity_DalDbEvent Category: Startup Event ID: 31003Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:Last Category An error occurred in attempting to remove 0018c0bcdb965d45bcd8092c33758089 from the directory. Event Type: ErrorEvent Source: CiscoUnity_DSADEvent Category: Error Event ID: 1047Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:The Cisco Unity service that monitors Active Directory (AvDSAD) failed to remove object.Type: AVOBJECTTYPE_MAILUSERName: ???Reason: ERROR_DS_NO_SUCH_OBJECT: There is no such object on the server.Domain Controller: ITAMDC01.corp.wdsglobal.comPossible causes include: 1) Network connectivity to the Domain Controller. 2) Insufficient rights for the Cisco Unity service thatmonitors Active Directory (AvDSAD) account.Event Type: ErrorEvent Source: CiscoUnity_MALExEvent Category: Error Event ID: 30012Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:An occurred which prevents successful Exchange access by AvCsMgr via MAPI.

    Event Type: ErrorEvent Source: CiscoUnity_MALExEvent Category: Error Event ID: 30007Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:An error occurred while AvCsMgr tried to logon to MAPI mailbox /o=WDSGlobal/ou=Seattle/cn=Recipients/cn=Doug.Branson on server ITAMEX01. The MAPI subsystem return the following error: The information store could not be opened.Ensure that the Cisco Unity service that monitors Active Directory (AvDSAD) can contact the Domain Controller and has sufficient rights to remove objects. If the problem persists, enable all the micro traces for the Cisco Unity service that monitors Active Directory (AvDSAD) in the Cisco Unity Diagnostic Tool. Report the problem to Cisco Technical Support and include the diagnostic log.
    These errors are typically an indication of configuration issues with Cisco Unity, Microsoft Exchange, or the MAPI subsystem. Verify that the Cisco Unity services accounts are granted the correct permissions and that there are no issues with the installation. The SysCheck utility might assist in the diagnosis of the problem.
    Refer to Cisco Unity Error Message Finder for more information.
    ResolutionIn order to resolve this issue perform these steps:
    Restart the AvDSAD and AvGlobalcatalog services and monitor changes in the Active Directory and in the Global Catalog.Choose Cisco Unity Tools Depot Diagnostics Tools and double-click on DOHProp test. Contact Cisco Technical Support for passwords and do not make any other changes in the Digital Off-Hook (DOH) as it can severely damage the Cisco Unity server. Enter the password for the day, and click on the DOH Property Tester window.Choose GC Monitor, and choose TotalResync.In the Event Viewer, ideally, these events appear:Event ID: 1038The Cisco Unity service that monitors the global catalog (AvDSGlobalCatalog) started a full synchronization cycle with...When it finishes, this appears:   Event ID: 1043The Cisco Unity service that monitors the global catalog (AvDSGlobalCatalog) completed a full synchronization cycle with...
        Close the GC Monitor window, and then choose AD Monitor.Choose TotalResync.In the Event Viewer, ideally, these events appear:Event ID: 1094The Cisco Unity service that monitors Active Directory (AvDSAD) started a full synchronization cycle.  A message will be written to the event log when this synchronization cycle is complete...    When it finishes, this appears:
       Event ID: 1093The Cisco Unity service that monitors Active Directory (AvDSAD) completed a full synchronization cycle with...
        Close the DOH windows and try  to delete or import subscribers.Refer to these documents for more information and troubleshooting tips:

    Cisco Unity Reconfiguration and Upgrade Guide (With Microsoft Exchange)

    DB:2.82:Unable To Delete Subscribers From Cisco Unity 4.X mm

    Core IssueIn an attempt to delete a subscriber from Cisco Unity, there are a few errors seen in the application event logs, and subscribers are not deleted.
    Event Type: ErrorEvent Source: CiscoUnity_DalDbEvent Category: Startup Event ID: 31003Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:Last Category An error occurred in attempting to remove 0018c0bcdb965d45bcd8092c33758089 from the directory. Event Type: ErrorEvent Source: CiscoUnity_DSADEvent Category: Error Event ID: 1047Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:The Cisco Unity service that monitors Active Directory (AvDSAD) failed to remove object.Type: AVOBJECTTYPE_MAILUSERName: ???Reason: ERROR_DS_NO_SUCH_OBJECT: There is no such object on the server.Domain Controller: ITAMDC01.corp.wdsglobal.comPossible causes include: 1) Network connectivity to the Domain Controller. 2) Insufficient rights for the Cisco Unity service thatmonitors Active Directory (AvDSAD) account.Event Type: ErrorEvent Source: CiscoUnity_MALExEvent Category: Error Event ID: 30012Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:An occurred which prevents successful Exchange access by AvCsMgr via MAPI.

    Event Type: ErrorEvent Source: CiscoUnity_MALExEvent Category: Error Event ID: 30007Date: 6/23/2006Time: 11:01:42 AMUser: N/AComputer: UNITY1Description:An error occurred while AvCsMgr tried to logon to MAPI mailbox /o=WDSGlobal/ou=Seattle/cn=Recipients/cn=Doug.Branson on server ITAMEX01. The MAPI subsystem return the following error: The information store could not be opened.Ensure that the Cisco Unity service that monitors Active Directory (AvDSAD) can contact the Domain Controller and has sufficient rights to remove objects. If the problem persists, enable all the micro traces for the Cisco Unity service that monitors Active Directory (AvDSAD) in the Cisco Unity Diagnostic Tool. Report the problem to Cisco Technical Support and include the diagnostic log.
    These errors are typically an indication of configuration issues with Cisco Unity, Microsoft Exchange, or the MAPI subsystem. Verify that the Cisco Unity services accounts are granted the correct permissions and that there are no issues with the installation. The SysCheck utility might assist in the diagnosis of the problem.
    Refer to Cisco Unity Error Message Finder for more information.
    ResolutionIn order to resolve this issue perform these steps:
    Restart the AvDSAD and AvGlobalcatalog services and monitor changes in the Active Directory and in the Global Catalog.Choose Cisco Unity Tools Depot Diagnostics Tools and double-click on DOHProp test. Contact Cisco Technical Support for passwords and do not make any other changes in the Digital Off-Hook (DOH) as it can severely damage the Cisco Unity server. Enter the password for the day, and click on the DOH Property Tester window.Choose GC Monitor, and choose TotalResync.In the Event Viewer, ideally, these events appear:Event ID: 1038The Cisco Unity service that monitors the global catalog (AvDSGlobalCatalog) started a full synchronization cycle with...When it finishes, this appears:   Event ID: 1043The Cisco Unity service that monitors the global catalog (AvDSGlobalCatalog) completed a full synchronization cycle with...
        Close the GC Monitor window, and then choose AD Monitor.Choose TotalResync.In the Event Viewer, ideally, these events appear:Event ID: 1094The Cisco Unity service that monitors Active Directory (AvDSAD) started a full synchronization cycle.  A message will be written to the event log when this synchronization cycle is complete...    When it finishes, this appears:
       Event ID: 1093The Cisco Unity service that monitors Active Directory (AvDSAD) completed a full synchronization cycle with...
        Close the DOH windows and try  to delete or import subscribers.Refer to these documents for more information and troubleshooting tips:

    Cisco Unity Reconfiguration and Upgrade Guide (With Microsoft Exchange)

  • RELEVANCY SCORE 2.81

    DB:2.81:Fim Synchronization Service Installer Rollback 9d


    Hello all,
    I've been trying to install the Microsoft Forefront Identity Manger synchronization service and having issues. I get back the initial installation, but towards the end the installer rolls back the action. I'm installing just the Sync Service
    to work with our AD LDS data, kind of like the MIIS used to work 2003. I just need this part of the service for password resets (I work at a college). I followed a guide by turning on Verbose and looked at the logs. Could not find any indication
    of errors.
    Thanks

    DB:2.81:Fim Synchronization Service Installer Rollback 9d

    Chris,
    First, let me thank you for your help. I finally got the sync service installed and working correctly with our environment. Here is a breakdown of what possibly went wrong and how I corrected it:

    I was trying to install the Synchronization Service on a domain controller (as per our previous configuration) and the installer kept rolling back. A representative of Microsoft told me this was a no no; so, I moved the installer to a new machine
    and the Synchronization Service installed with no hitches.As per Chris's instructions and the Microsoft guide, I was able to successfully migrate our old database, decrypt the keys (employee before my time did not leave the password), and tested the sync with user's login and no problems.
    I appreciate all of your help Chris, thanks again. Guides posted below.

    Jered
    Migrating from ILM to FIM 2010:
    http://technet.microsoft.com/en-us/library/ff608268%28v=ws.10%29.aspx
    Installation guide for FIM 2010:
    http://technet.microsoft.com/en-us/library/ee534909%28v=ws.10%29.aspx

  • RELEVANCY SCORE 2.81

    DB:2.81:Error :Failed To Install Local Copy Of Isw2004.309.1157.Jar s1


    After a successfull installation of Directory Server 5.2, Messaging Queue and Identity Synchronization for Windows, when starting the graphical console I'm getting the error above. Any suggestions?

    DB:2.81:Error :Failed To Install Local Copy Of Isw2004.309.1157.Jar s1

    speak russian?
    Check file isw2004.309.1157.jar in path:
    /you_install_ds_path/java/jars

    Check owner in you DS patch directory. In my case after install Patch 2 owner change to unregistred in system and file isw2004.309.1157.jar not installed.

  • RELEVANCY SCORE 2.80

    DB:2.80:How Do I Adjust Or Redo The Changes I Made After Active Directory Schema Installation x1


    Hi,
    I'm new to lync server 2013 and went through the installation step by step.
    Presently, I'm stuck with errors at the final installation stage and need to start all over but I don't know how to adjust the changes made to the Active Directory Schema during the first installation.
    Please I'll appreciate any assistance possible.
    Thanks

    DB:2.80:How Do I Adjust Or Redo The Changes I Made After Active Directory Schema Installation x1

    Hey,
    There is no need to reverse the schema changes to remove Lync Server, and it wouldn't be possible without rolling back your AD to before the updates. Just remove Lync and try again.
    I couldnt find a Lync 2013 guide but you could follow 2010 as a refference -http://technet.microsoft.com/en-us/library/gg195815(v=ocs.14).aspxAndrew Morpeth
    Lync Server Specialist - Auckland, NZ
    Blog - http://www.lync.geek.nz
    Twitter @AndrewMorpeth

  • RELEVANCY SCORE 2.78

    DB:2.78:User Profile Service Not Provisioning Users c3


    Hello,
    I have User Profile service set up and everything seems to be in order and no errors are presented. I did reference the SharePoint George method. However, when I try to start the initial synchronization, a Full Synchronization will not start.
    It sits forever saying Profile Synchronization Status: Idle. I can start an incremental syncronization and it shows over 100 additions, but never goes past the first stage Syncronization Connection Stage Active directory import. Users are not
    imported into SharePoint.
    Thanks

    DB:2.78:User Profile Service Not Provisioning Users c3


    Have checked Your UPA services A/C have sufficient privilege on AD , Check group Policy
    also For Your Services A/c its permission related Issue .

    Check permission of services A/c as require on AD Check group policy Check user privilege On DB server Your Services A/c should be part of AD
    administrator
    After that You can created new UPA services , Del timer Job , Old UPA Services application etc

    I have tested and pretty much sure it will work

    Cheers

  • RELEVANCY SCORE 2.77

    DB:2.77:N1 Sps 6.0: Failed To Initialize The Database 78


    Hello everybody.

    Installation fails on OpenSolaris (Nevada b_77, x86) with the following errors:

    -----
    N1SPSInstaller.log.5689
    [...]
    Installation of SUNWspsj1 was successful.
    Error! Failed to initialize the database (exit value was 1).
    Exiting..

    N1SPSInstaller.log.5689.db.out
    cannot access parent directories
    could not identify current directory: Permission denied
    could not identify current directory: Permission denied
    could not identify current directory: Permission denied
    The program "postgres" is needed by initdb but was not found in the
    same directory as "initdb".
    Check your installation.
    -----

    Installation is done as root, user account for the software is n1sps.
    Any suggestions?

    Thanks,
    Pontius

    DB:2.77:N1 Sps 6.0: Failed To Initialize The Database 78

    Hmm, I don't think Nevada(Solaris 11) 77 is supported for SPS 6.0

    I think you had clashes with existing postgresql packages ... if you will hit other problems I suggest going back to S10u4 and so run it on supported(and tested) environment ...

    this trick you did might be a pure accident ...

    anyway, enjoy SPS !

  • RELEVANCY SCORE 2.77

    DB:2.77:Identity Synchronization For Microsoft 1.0 Installation Failure - Stuck Mq c9


    Hy all,

    We are trying to setup a synchronization system between SUN Directory 5.2 and MS AD using Identity Synchronization 1.0.

    Sun Directory Server 5.2 is installed.
    I have already installed and configured Identity Synchronization for Windows 1.0 on a test machine and everything was OK. I have worked on this product for more than one week and I have a good knowledge on it.

    Now I want to reproduce my test configuration on a production machine. I have carefully followed the installation procedure supplied by SUN however the installation script failed at the SUN ONE Message Queue step [Core Installation]: the script is stucked and there is absolutely no way of moving to the next Core Installation step. The only way to exit from the installation is to kill the installation process.......

    Many thanks in advance for your help.

    Gregoire

    DB:2.77:Identity Synchronization For Microsoft 1.0 Installation Failure - Stuck Mq c9

    All,

    I do not clearly understand what is the cause of my problem that's why previously do not post the solution:
    The thing is that I have below right:
    # ls -al /dev/random
    prw-r--r-- 1 root other 0 Sep 24 16:40 random
    Those access rights made the installation stuck on the MQ step.
    So I change them to obtain below access rights:
    # ls -al /dev/random
    lrwxrwxrwx 1 root root 33 Sep 24 16:54 random -
    ../devices/pseudo/random@0:random
    And the installation is now OK.

    Regards.

    Gregoire

  • RELEVANCY SCORE 2.77

    DB:2.77:Active Directory Enterprise Resource Pool Synchronization Wres_Ad_Guid In Table Resources Is Dbnull 9p


    Hi,
    I was trying to set Active Directory Enterprise Resource Pool Synchronization in Project Server 2010 but I get this error:
    The synchronization failed. To identify where the errors occurred, see the Windows event log on the server.

    Then in the LOG file I see this:
    SSP Name: Project Server PSError: NoError (0) A general exception occurred during communication with Active Directory. Context: ExecuteERPSync. Additional Information: An exception occurred when reading resource data and synchronizing the enterprise
    resource pool with active directory.. Exception Info: The value for column 'WRES_AD_GUID' in table 'Resources' is DBNull.

    I don't have any custom fields.
    The Active Directory group has ~200 users, and Enterprise Resource Pool has ~400.
    Should they have the same number before I start the synchronization?

    What should I do?
    Thanks

    DB:2.77:Active Directory Enterprise Resource Pool Synchronization Wres_Ad_Guid In Table Resources Is Dbnull 9p

    When creating a new instance:
    If the administrator user created by default (AdminProject) has the user
    account of an existing user, the synchronization
    fails (Admin project has WRES_AD_GUID = NULL;existing user has WRES_AD_GUID NULL
    ). I changed the user
    account of AdminProject,
    I disabled the user and I blocked the
    user synchronization. In this way I solved the problem.

  • RELEVANCY SCORE 2.76

    DB:2.76:Thread: Sbs 6.5 Groupwise Edir Synchronization f3


    Hello

    After installing GW on SBS 6.5 there is users synchronization with

    eDirectory. To remove GW account to specyfic users I must use (for

    example) ConsoleOne and click delete GWAccount. Can I tell system wich

    OU in directory should have synchronization and wich should not?

    DB:2.76:Thread: Sbs 6.5 Groupwise Edir Synchronization f3

    We seem to be going round in circles.

    You can manually create any GW accounts you want. the Sync Rule

    ensures that these users are correct in GW and eDir.

    It will not create users. If you want users you can create them

    manually when you create a user or after the event.

    If you need to create large numbers of users (on NSBS??) then you can

    use scripted tools etc.

    Tim

    ___________________

    Tim Heywood (SYSOP)

    NDS8

    Scotland

    (God\'s Country)

    ___________________

    In theory, practice and theory are the same

    In Practice, they are different

  • RELEVANCY SCORE 2.76

    DB:2.76:Sp2010 User Profile Full Import: Fimsynchronizationservice Connectivity Issues 1z


    I am attempting to do a full import of a parent one-way trust domain but I get this error in the Application Event Log:
    The management agent MOSSAD-[PARENT_DOMAIN] failed on run profile DS_FULLIMPORT because of connectivity issues. Additional Information Discovery Errors : 0 Synchronization Errors : 0 Metaverse Retry
    Errors : 0 Export Errors : 0 Warnings : 0 User Action View the management agent run history for details.

    The Synchronization Service Manager (C:\Program Files\Microsoft Office Servers\14.0\Synchronization Service\UIShell\miisclient.exe) reports a failed-search error: Replication access was denied (error code: 8453). The Synchornization
    Connection runs as an account in the Parent Domain, while the User Profile Service runs as a service account in the child domain.
    Currently I don't have the permission in the Parent Domain to delegate Replicating Directory Changes to the parent account - is there any workaround for this?
    Just FYI, for people who have this issue, you may find this useful:SP2010: FIMSynchronizationService errors when running Profile Synchronization

    DB:2.76:Sp2010 User Profile Full Import: Fimsynchronizationservice Connectivity Issues 1z

    For the profile synchronization to work, our service account which is being used by UPS should have the “Replicate Directory Changes” permission on a domain.

    This rights for query changes in the directory. This permission does not allow an account to make any changes in the directory. Refer:
    http://technet.microsoft.com/en-us/library/hh296982.aspx#RDCdomain

    So, Here are the steps to fix:
    Open the Active Directory Users and Computers snap-in

  • RELEVANCY SCORE 2.76

    DB:2.76:Dirsync Identitydatavalidationfailed Error 9c


    Hello,

    We are getting an error message from DirSync on a disabled SMSCliToknAcct account that is quite annoying (MSOnline sends an email reporting the same error every 3 hours)
    This is the error message. Any help is appreciated.
    See Directory Synchronization errors
    for more information about the errors listed in this email message.
    The Directory Synchronization batch run was completed on
    Tuesday, 09 September 2014 15:38:47 GMT for tenant WXXX[wxxx.onmicrosoft.com]. The following errors occurred during synchronization:

    Identity

    Error Description

    On-premises object ID

    SMSCliToknAcct@wxxx.org

    Unable to update this object in Windows Azure Active Directory, because the attribute [Username], is not valid. Update the value in your local directory services.

    oYZ0Oibqkarqd3VXXVO6A==

    Tracking ID: d8c4ff31-e4bb-4ed4-aae7-874ace8c062c
    Thank you, The Windows Azure Active Directory Team

    DB:2.76:Dirsync Identitydatavalidationfailed Error 9c

    Hi Steven;

    I am glad it worked out for you. Will go ahead and close this thread, Until next time.

    Warm Regards
    Prasant

  • RELEVANCY SCORE 2.75

    DB:2.75:Oim Ad Password Synch Udf Confusion a9


    The OIM Connector Guide for Microsoft Active Directory tells you to create a custom attribute in Oracle Identity Manager to act as a flag for tracking password changes initiated by Microsoft Active Directory.

    The OIM Password Synchronization Module for Microsoft Active Directory Installation and Configuration Guide describes what it calls an optional UDF field. It says that if required a UDF can be updated with the result of the operation and Timestamp so that additional workflow can be started.

    Are these two fields the same, or are they used for different purposes?

    DB:2.75:Oim Ad Password Synch Udf Confusion a9

    The OIM Connector Guide for Microsoft Active Directory tells you to create a custom attribute in Oracle Identity Manager to act as a flag for tracking password changes initiated by Microsoft Active Directory.

    The OIM Password Synchronization Module for Microsoft Active Directory Installation and Configuration Guide describes what it calls an optional UDF field. It says that if required a UDF can be updated with the result of the operation and Timestamp so that additional workflow can be started.

    Are these two fields the same, or are they used for different purposes?

  • RELEVANCY SCORE 2.74

    DB:2.74:Isw Broker Password? 1s


    I'm trying to troubleshoot a new installation of Identity Synchronization for Windows, but I'm unable to query the ISW message queue broker. The error message says: [C4084]: User authentication failed. I tried using the default broker password, which is admin, and I tried using the passfile referenced in imqbrokerd.conf. I also tried the password I used to set up ISW and the directory server.

    Anyone know what the password is? Thanks. -G.

    DB:2.74:Isw Broker Password? 1s

    I'm trying to troubleshoot a new installation of Identity Synchronization for Windows, but I'm unable to query the ISW message queue broker. The error message says: [C4084]: User authentication failed. I tried using the default broker password, which is admin, and I tried using the passfile referenced in imqbrokerd.conf. I also tried the password I used to set up ISW and the directory server.

    Anyone know what the password is? Thanks. -G.

  • RELEVANCY SCORE 2.74

    DB:2.74:Office 365 Directory Synchronization Tool 1m


    Where can I download the directory synchronization tool for office 365?
    Regards
    Peter

    DB:2.74:Office 365 Directory Synchronization Tool 1m

    The link is provided to you from within the Microsoft Online Services portal when you sign in and go under Directory Synchronization.
    LoryanMCSE 2003, MCTS (2008, LCS, OCS, SharePoint)
    Paradyne | My BPOS blog (Explore the BPOSsibility) |
    BPOS Tools

  • RELEVANCY SCORE 2.74

    DB:2.74:Sun Java Messaging Server m7


    Hi,

    I want to configure Active directory server which is in windows with directory server which is in solaris using sun java system identity synchronization for windows.

    Here many dependencies are there while doing the installation
    I want the order of the products installation in solaris

    I already installed the calender server
    I want to configure Windows active directory server with solaris directory server using sun java system identity synchronization server

    Please letme know the order of the products installation steps

    Thanks in Advace
    M. Audippa Naidu

    DB:2.74:Sun Java Messaging Server m7

    About all I can suggest is that you ask in the Directory forum. I've never touched the idsync product, and have no idea how to connect our Directory Server with Active Directory. I believe it can be done.

  • RELEVANCY SCORE 2.74

    DB:2.74:Event Id: 7715, 7731 p3


    I am getting the following errors in my application event log. Does anybody know how to fix these? thanks for your help in advance
    Event Type:Error
    Event Source:Office SharePoint Server
    Event Category:Project Server Active Directory Synchronization
    Event ID:7715
    Date:6/15/2010
    Time:10:00:29 PM
    User:N/A
    Computer:TEST01
    Description:
    Standard Information:PSI Entry Point:
    Project User: Domain\spservices
    Correlation Id: 7cf00f17-bc73-40f1-8b9d-a9d58eb75460
    PWA Site URL: http://test/EPM
    SSP Name: SharedServices
    PSError: Success (0)
    A general exception occurred during communication with Active Directory. Context: SyncErp. Additional Information: An exception occurred while synchronizing the enterprise resource pool.. Exception Info: The given DataRow is not in the current DataRowCollection.
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.

    Event Type:Error
    Event Source:Office SharePoint Server
    Event Category:Project Server Active Directory Synchronization
    Event ID:7731
    Date:6/15/2010
    Time:10:00:29 PM
    User:N/A
    Computer:TEST01
    Description:
    Standard Information:PSI Entry Point:
    Project User: Domain\spservices
    Correlation Id: 7cf00f17-bc73-40f1-8b9d-a9d58eb75460
    PWA Site URL: http://test/EPM
    SSP Name: SharedServices
    PSError: Success (0)
    A resource could not be updated during Project Server Active Directory Synchronization because the project server account performing the synchronization does not have permission to update the resource. Resource GUID: 3dec08d1-d496-465e-81b7-fc49f02e5fdc. Resource
    Name Hagedorn; Scott
    For more information, see Help and Support Center at
    http://go.microsoft.com/fwlink/events.asp.

    DB:2.74:Event Id: 7715, 7731 p3

    So which option, 1, 2, or 3 eventually solved your error (7731 specifically)?

  • RELEVANCY SCORE 2.74

    DB:2.74:I Have Created One Synchronization Connection Between Active Directory And Sharepoint With Farm Adminstrator Permissions pa


    Hi All,
    I have created one synchronization connection between active directory and sharepoint with farm adminstrator permissions after that started profile synchronization with full synchronization, but data was not synchronize from active directory due to import
    connection was stopped (error code is 8453).
    Can any one help me where i did mistake.

    DB:2.74:I Have Created One Synchronization Connection Between Active Directory And Sharepoint With Farm Adminstrator Permissions pa

    where did you see this error ? is there anymore details.

    i think the account you are using for Sync does not have Replicate Directory Changes permission in AD. follow below article and give Replicate directory changes permission.

    http://technet.microsoft.com/en-us/library/hh296982(v=office.15).aspx

    Thanks, Noddy

  • RELEVANCY SCORE 2.73

    DB:2.73:User Profile Synchronization Service Failes To Sync as


    Hey,
    i want to start my User Profile Synchronization Service, but i stuck in starting. When i click
    Manage Service Applications - User Profile Sync Service App - on the right side i get the following status User Profile Sync is being provisioned. Please wait....
    The ProfileSyncSetupJob is active for about 1h. And the console shows me Provi... as status.
    What i've done to solve:
    - IISreset
    - deleted ForefrontIdendityManager Certificates
    - shutdown/restart the SharePoint Service via console (stop-spserviceinstance id)
    - FIMSynchronizationService restarted
    - looked up the logfiles:
    (FIMSynchronizationSErvice: The service was started successfully. ---- No other Warnings, or Errors )
    - my Account is in the admin group of the local adminitrators
    - the account has the requested rights:
    (Replicating Directory Changes,
    Pre Windows 2000 Compatible Access permission, Replicate Directory Changes ,permission on the cn=configuration containerChild, Objects and Write permission
    Hope someone can help me out. Thanks in advance.

    DB:2.73:User Profile Synchronization Service Failes To Sync as

    Hi,
    When I was configuring UPS, I remember going into component services and changing the permissions on these components, and Ichanged permissions on the 14 hive folder for the UPS service account.
    Also I have hardly found anyone whose UPS services is running without exceptions, even if it works perfectly it will keep throwing exceptions.Aleem Sheikh | SharePoint Architect/Developer | MCPD(SP 2010), MCTS(MOSS 2007), MCAD(.Net), MCSD(VS 6) | London, United Kingdom

  • RELEVANCY SCORE 2.73

    DB:2.73:Desktop Administrator Directory Synchronization pj


  • RELEVANCY SCORE 2.73

    DB:2.73:Unable To Download Sun Java System Identity Synchronization For Windows ck


    Please any one can help me How can i download Sun Java System Identity Synchronization for Windows

    * Sun Java System Directory Server ---------------------able to download
    * Sun Java System Directory Proxy Server --------------able to download
    * Sun Java System Identity Synchronization for Windows-------------Not able to download
    * Sun Java System Directory Editor------------------------able to download
    * Sun Java System Directory Server Resource Kit------able to download

    Regards
    kamal

    DB:2.73:Unable To Download Sun Java System Identity Synchronization For Windows ck

    ISW is already present in the 5.2p4 and 5.2p6 archives.

    dn: cn=pswsync,cn=plugins,cn=config
    objectClass: top
    objectClass: nsSlapdPlugin
    objectClass: ds-signedPlugin
    objectClass: extensibleObject
    cn: pswsync
    nsslapd-pluginPath: /export/home/abc/local/ds52p6/lib/psw-plugin.so
    nsslapd-pluginInitfunc: pswsync_init
    nsslapd-pluginType: preoperation
    nsslapd-pluginEnabled: off
    creatorsName: cn=server,cn=plugins,cn=config
    modifiersName: cn=server,cn=plugins,cn=config
    createTimestamp: 20090121011643Z
    modifyTimestamp: 20090121011643Z
    nsslapd-pluginId: Identity Sync for Windows
    nsslapd-pluginVersion: 5.2_Patch_6
    nsslapd-pluginVendor: Sun Microsystems, Inc.
    nsslapd-pluginDescription: Identity Synchronization for Windows Plug-In

  • RELEVANCY SCORE 2.73

    DB:2.73:Installation Failed On Windows 7 Platform 9p


    I am attempting to install Oracle Enterprise edition on a Windows 7 32 bit platform. During the installation, several errors are displayed stating that certain files could not be found within the installation directory. So I continued from these errors, and then when the installer got to the step to create the database, it couldn't even run the configuration assistant. Any ideas what is going on here?

    DB:2.73:Installation Failed On Windows 7 Platform 9p

    Hi;

    Hi, I am installing 11g R2 onto Windows 7 Home Premium version. Home version is not certified wiht any oracle product. I suggest

    1. Download OEL 5.x from e-delivery site
    2. Create VM machine on your win 7
    3. Install OEL linux on you VM
    4. Install your 11gr2 db on your linux Vm machine

    Make googling there are soo good link blog avaliable which is mention installation database on Vm linux

    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding

    Regard
    Helios

  • RELEVANCY SCORE 2.73

    DB:2.73:Error During Installation Of 10g Clusterware z3


    I made a mistake by installing Oracle Database 10g before installing Oracle 10g Clusterware. I removed the Oracle Database 10g installation using OUI and deleted the product directory and the oraInventory directory. When I run the installer for Oracle 10g Clusterware, I got the following message:

    The installer has detected that you have configured single-instance Cluster Synchronization Services (CSS) on the following nodes:
    wrkarea1

    Why am I getting this message? How do I resolve this error?

  • RELEVANCY SCORE 2.72

    DB:2.72:Sql 2012 Web Synchronization On Server 2008r2 X64 as


    I can't get the IIS portion of web synchronization to work. I keep receiving 500 server errors when i try to go to the test pagehttps://server.XXXX.com/directory/replisapi.dll?diag
    I have followed the instructions onhttp://technet.microsoft.com/en-us/library/ff714039.aspx
    The SQL server is the same machine that has IIS installed.
    Has anyone else had success getting this to work?

    Version info:
    SQL 2012 Standard 64 bit. 11.0.3128.0
    Server 2008 R2 Standard 64 bit.
    Default IIS Installation.

    DB:2.72:Sql 2012 Web Synchronization On Server 2008r2 X64 as

    XXX.com is a masking for my site. My site is an internal site not accessable on the internet.

  • RELEVANCY SCORE 2.72

    DB:2.72:Cueac Cannot Show All The Users On The Directory zm



    Hello guys,

    I have the following scenario :

    1 cluster of CUCM with version 7.1.5.10000-12

    1 CUEAC Server with version 8.6.1.9 , console run with version 8.6.1.595.

    I have integration between a microsoft ldap server and CUCM .

    The CUEAC imports all the contact from CUCM via Directory synchronization ,the issue is that i cannot see all the contact from CUCM in the directory of the console.

    I download the OPR logs from console and i dont see any errors, but the ldap plug in logs from CUEAC shows all the users but when i go to console i cannot see it .

    I resynchronize few times and i see that cueac import the user by part .eg .firt name,last name ,directory number."

    Somebody can give an idea or help me with that issue?

    PD:  I dont have any rules created.

    Regards

    DB:2.72:Cueac Cannot Show All The Users On The Directory zm


    We have had issues when the IP Phone field in not populated with the extension number in the LDAP records for the users..

  • RELEVANCY SCORE 2.72

    DB:2.72:Troubleshooting Generic Fim Synchronization Errors ka


    Experts Corner Article

    Wiki Page:
    Troubleshooting Generic FIM Synchronization Errors

    DB:2.72:Troubleshooting Generic Fim Synchronization Errors ka

    Experts Corner Article

    Wiki Page:
    Troubleshooting Generic FIM Synchronization Errors

  • RELEVANCY SCORE 2.71

    DB:2.71:Sharepoint 2010 User Profile Sync With Fim Fail With Need-Full-Object j1


    I have recently re-created the User Profile Service application on a SharePoint 2010 farm to resolve issues with profile synchronization that occurred. In the process the existing ProfileDB and SocialDB were retained and FIM's SyncDB dropped to be
    created a fresh.
    Original problems with profile sync are resolved but now see in Synchronization Service Manager the Management Agent of type Extensible Connectivity reports many discovery errors need-full-object for users.
    The only event in Windows Event Log for FIMSynchronizationService is a warning

    ...The rules configuration has changed since the last full import or full synchronization.
    User Action
    To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.
    A full synchronization is being run.
    The synchronization runs for 12 hours before being shutdown by the farm backup process. There are around 5000 users in Active Directory and a full sync used to take 5-6 hours.
    What is the best way to resolve this?

    DB:2.71:Sharepoint 2010 User Profile Sync With Fim Fail With Need-Full-Object j1

    Firstly, your question appears to relate to the built-in run-time FIM Sync components deployed as part of SharePoint 2010 - and if this is the case you had best re-post to this forum instead (since this has nuances of its own completely different from the
    stand-alone FIM product):
    http://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointadminprevious
    If, however, you are interested in how a FIM person would approach your problem, the need-full-object error occurs when a DELTA import has been processed when a FULL import is required. My approach would be to run a full import on each of your 2 MAs,
    followed by a DELTA synchronisation on each - and then if a FULL synchronisation is required the console will alert you to this interactively (if you are running the FIM identity manager console in lieu of using SharePoint wizards) or in the server Event Logs.Bob Bradley (FIMBob @
    TheFIMTeam.com) ... now using FIM Event Broker for just-in-time delivery of FIM 2010 policy via the sync engine, and continuous compliance for FIM

  • RELEVANCY SCORE 2.71

    DB:2.71:Ssma 5.0 For Oracle Runtime Emulation Error pf


    I have installed SSMA 5.0, and the Oracle Extention pack on my SQL Server (Denali). I received no errors during the installation. I performed Typical for both installs.
    When running a migration, when I'm in the SQL Server Metadata Explorer window, if I right click on the schema I'm migrating and choose Synchronize with Database, after entering my credentials, I get the following errors:

    SSMA Runtime Emulation components are corrupted or You do not have permission to use it.
    SSMA Synchronization components are corrupted or You do not have permission to use it.

    I have uninstalled the SSMA components and reinstalled them. I have also given all users Full Control to the SSMA installation directory.
    Anybody encounter a similar error?

    DB:2.71:Ssma 5.0 For Oracle Runtime Emulation Error pf

    Hi,
    Have you install SSMA 5.0 Extension Pack Installation Error on the server where installed SQL Server? In case you got an installation error, you can following the following blog post:http://blogs.msdn.com/b/ssma/archive/2011/05/12/ssma-5-0-extension-pack-installation-error.aspx.
    By the way, you can ask SSMA product team directly for product support viassmahelp (at) microsoft (dot) com.
    Hope this helps.Best Regards,
    Chunsong Feng

    Please remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.71

    DB:2.71:Synchronization From Oracle Internet Directory To Oracle Content Management jx


    Hi,

    can anybody explain me, how to implement trough oracle directory integration and provisioning service synchronization of users from OID to CM ?

    DB:2.71:Synchronization From Oracle Internet Directory To Oracle Content Management jx

    Hi,

    can anybody explain me, how to implement trough oracle directory integration and provisioning service synchronization of users from OID to CM ?

  • RELEVANCY SCORE 2.71

    DB:2.71:Id Gets Deleted After Directory Synchronization js



    I have below issue with directory synchronization.

    Two user IDs are getting deleted from eRoom after the directory synchronization. User details are synchronized from eDirectory (LDAP) to eRoom and only these two IDs are getting deleted and these tow IDs belongs to same community.

    eRoom version 7.31

    Please assist ..

    DB:2.71:Id Gets Deleted After Directory Synchronization js


    If the members are getting deleted with the Directory Synchronziation, it would suggest that these accounts are no longer visible in the LDAP directory.

    To confirm, you could trace a Directory Synchronization.

    Setup Etrace with the following settings:

    Exceptions 1

    Directory 5

    -- Everything Else at 0

    -- Log All Trace Data.

    Take note of the Member IDs and the Member Login Names and Directory Login Name (if Different).

    Click the Synchronize now button.

    For assistance in analyzing the Trace Data, please open a Service Request.

  • RELEVANCY SCORE 2.70

    DB:2.70:Modify Connectionsynchronizationou In User Profile Synchronization k8


    We have configured a Profile Synchronization Connection for Users in a seperate, untrustedAD-Forest. For the synchronization we use Active Directory Import connection.

    If we try to modify the containers, who should synchronized into sharepoint, we can change and save it without errors. But if we open the connection settings again, the removed OUs are appeares again.
    Therefore we have looked for a cmdlet or commandline to modify the OU-List, but we couldn't find anything.
    Is it possible to modify the list of OUs in the container settings of a profile synchronization connection without delete and recreate the connection completely?
    Thanks for your help.

    DB:2.70:Modify Connectionsynchronizationou In User Profile Synchronization k8

    Thanks for your reply.
    This commandlines are known, but the big question is:
    Is it possible to modify the list of OUs in the container settings of a profile synchronization connectionWITHOUT delete and recreate the connection completely?

  • RELEVANCY SCORE 2.70

    DB:2.70:Thumbnail Server Installation Errors xm


    I was installing the thumbnail server (5.3/sp2) on windows 2000 pro sp4 platformAs a part of the pre-installation process, i installed and configured contentserver 5.3/sp2.I am getting the following errors during the installation process :Could not create a directory : C:\Documentum\product\5.3\thumbsrv\logs; FOr more information see the error log C:\53sp2products\Thumbnail\setupError.logAny suggestions?

    DB:2.70:Thumbnail Server Installation Errors xm

    Nevermind, i was able to install the thumbnail server successfully.i was running in to a known bug for thumbnail server (5.3 SP2 )installation.Thanks, - KavuriMessage was edited by: kkavuri

  • RELEVANCY SCORE 2.70

    DB:2.70:Sunone Directory Server 5.2 Installation Issue xx


    Hi,

    I Uninstalled sunone directory server with some errors , After i tried to install the Sunone Directory Server but it is showing the error message as

    *" you do not have sufficient disk space in the selected directory to complete the installation.Specify a different directory or change your component selection" even there is enough space to install the directory server.

    Please help me in installing the SunOne dorectory Server.

    DB:2.70:Sunone Directory Server 5.2 Installation Issue xx

    does the installer ask you where to install to? Which folder on your 2003 server are you installing to?

  • RELEVANCY SCORE 2.70

    DB:2.70:Isw Installation Problem On Solaris Sparc p8


    We are currently running JES4 directory server version 5.2 patch 5.

    We wanted to test a JES5 installation so we could install Identity
    Synchronization for Windows (ISW) and see if it would resolve the
    problem we have keeping our Directory Server (JES4) and Active
    Directory (AD) servers synchronized.

    We did a clean install of JES5 with Directory Server 6.2. Prior to the
    installation of ISW, we migrated the data from our production JES4
    system and loaded that data into the newly installed and configured
    JES5 system. That all went fine.

    Then we then tried installing ISW, but the installation failed during the
    portion of the install process where the administration server is
    installed.

    Has anyone seen this problem, or can you tell us any gotchas?

    DB:2.70:Isw Installation Problem On Solaris Sparc p8

    We are currently running JES4 directory server version 5.2 patch 5.

    We wanted to test a JES5 installation so we could install Identity
    Synchronization for Windows (ISW) and see if it would resolve the
    problem we have keeping our Directory Server (JES4) and Active
    Directory (AD) servers synchronized.

    We did a clean install of JES5 with Directory Server 6.2. Prior to the
    installation of ISW, we migrated the data from our production JES4
    system and loaded that data into the newly installed and configured
    JES5 system. That all went fine.

    Then we then tried installing ISW, but the installation failed during the
    portion of the install process where the administration server is
    installed.

    Has anyone seen this problem, or can you tell us any gotchas?

  • RELEVANCY SCORE 2.70

    DB:2.70:Directory Junction Synchronization az


    Hi All,
    Can anybody ref me any doc / link for 'Directory Junction (LDAP /AD) Synchronization' with SUN IDM ?

    Thanks
    Randhir Singh

    DB:2.70:Directory Junction Synchronization az

    Hi All,
    Can anybody ref me any doc / link for 'Directory Junction (LDAP /AD) Synchronization' with SUN IDM ?

    Thanks
    Randhir Singh

  • RELEVANCY SCORE 2.70

    DB:2.70:Last Chance On Getting Help Sce2007 With Mutiple Client Issues pz


    Hi All,
    For those of you who is really good at SCE thing, maybe you could help me.  I have tried everything that I possibly can and try to get the problem solved and no avail and felt this might be the only place left to try.  Here is the story.  I have about 160 windows xp sp2/3 clients managed by SCE with separate sql 05 database.  For some reasons, some clients are not checking in whatsoever while most clients check in just fine.  About 40 of them never check in really.  So here is what i have done so far on the client side.  Run newsid.exe, delete clientid and then followed by /reauthorize /detectnow.  When I did that it seems work a little bit by getting OK on health and management status.  But no info on hard drive and installed software unlike other clients that are working.  In fact, I don't even care about the inventory information but I would really love to get update from wsus ugently.  So below is the script error that I am having on the client as well as reporting event.log for you to decipher.  Any help, suggestion is appreciated.
     
    Description:
    The process started at 4:10:53pm failed to create System.Discovery.Data, no errors deteced in the output.
    This process exited with 0 Command executed:
    C:\windows\system32\cscript.exe /nologo RedirectWSUS.vbs 0 {26D3CA4A-0EBA-57EB-2A74-589DAAFA8334} {...}
    trc-01  'working directory: C:\Program Files\system center operations Manager 2007\Health Service State\Monitoring Host Temporary File 5\673\One or more workfolws were affected by this.
    Workflow name:Microsoft.systemcneter.essentials.wsusRedirectDiscoveryInstane name:trc-01 
    InstantID:  {...} Management group: ....
     
     
     
    {E88F2449-457F-4F00-8214-C770A6657FDE} 2008-07-11 14:18:19:040-0700 1 188 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Installation Ready: The following updates are downloaded and ready for installation. This computer is currently scheduled to install these updates on Saturday, July 12, 2008 at 3:00 AM:  - Security Update for CAPICOM (KB931906){E8C0266C-23FB-4110-9917-912565C7D9C7} 2008-07-11 16:28:38:353-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{EF1AD473-03EF-4BBD-A7D9-E7B462FEF5B6} 2008-07-11 21:28:40:057-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{4F803333-45F0-438D-9232-AF4BAF6A2056} 2008-07-12 02:28:41:641-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{509D9D5F-B846-439C-BC27-9CB25E073EB8} 2008-07-12 03:00:11:705-0700 1 163 101 {EBBDC330-BD19-47B9-9E08-C4F32694429B} 102 0 AutomaticUpdates Success Content Download Download canceled.{E5F57E00-3C41-413F-9708-BDE46AFBCC96} 2008-07-12 07:28:43:099-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{7097E60C-1D76-4432-B52B-0F6BFBFCD406} 2008-07-12 12:28:44:642-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{7F0A7010-9732-47AA-A881-E4A88EA7D84E} 2008-07-12 17:28:46:288-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{0DB2116E-B07B-43D1-8762-DBCD049B240F} 2008-07-12 22:28:48:221-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{D36DA60F-C25B-4CB4-828A-14970592129B} 2008-07-13 03:28:49:686-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{67A1B07D-C3A6-4BB6-8282-7FD266D268C0} 2008-07-13 08:28:51:354-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{03DEE2C4-A9DE-4D4F-A38C-67D7B258975D} 2008-07-13 13:28:52:871-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{5216D332-1E86-423B-A65F-637B4272B4B8} 2008-07-13 16:28:39:509-0700 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.{E50228AE-952F-483A-BDD5-F49F2D9602E0} 2008-07-13 18:28:54:477-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{0932AFB3-C57F-45D3-868F-4110F8C44DCE} 2008-07-13 23:28:56:254-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{00DF35A9-EE07-413D-995E-8810791224F9} 2008-07-14 04:28:57:763-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{4F664DA4-5E4B-4F43-B540-4E4ADEE8C8F2} 2008-07-14 09:28:59:603-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{0F0E985C-B232-46BB-981D-23C1FF714956} 2008-07-14 14:29:01:118-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{314F4B4F-5725-46A8-B867-9A1A8E6075B4} 2008-07-14 19:29:02:786-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{A97F2593-A7C9-4527-B2C7-AF9466CB6A87} 2008-07-15 00:29:04:671-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{871ECCFF-5E61-49EF-9F57-3DF83FE9A031} 2008-07-15 05:29:06:214-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{CA2E165A-A102-4EED-ABF5-0F2141C5F170} 2008-07-15 10:29:07:932-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{1A039699-59DA-4136-B6F2-2CFEFA5FB7A4} 2008-07-15 15:29:09:546-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.{AF2BC268-6D8C-4FB6-B701-D3E7068E4B62} 2008-07-15 16:28:40:561-0700 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.{71A2C718-AFB8-4E01-9235-E1929D2BBEBA} 2008-07-15 20:29:11:324-0700 1 148 101 {00000000-0000-0000-0000-000000000000} 0 8024400e AutomaticUpdates Failure Software Synchronization Windows Update Client failed to detect with error 0x8024400e.  
     
     

    DB:2.70:Last Chance On Getting Help Sce2007 With Mutiple Client Issues pz

    Have a look at this WSUS FAQ page, which has quite a bit of info, including a sample batch file, to fix your specific issue.http://www.wsuswiki.com/ClientFAQ

  • RELEVANCY SCORE 2.70

    DB:2.70:Ad To Oid Sinchronization Stops After Migration To New Ad 1k


    Hi,
    we have Oracle Internet Directory (Oracle directory manager v. 10.2.2.2.0) running on Windows Server 2003 sp2 with Oracle AS (v. 10.1.2.2.0), connected using LDAP to AD domain controller on Windows Server 2003 sp2 for a few years now.

    So far so good, but our environment will be upgraded to AD Windows Server 2008 R2 (x64).
    When I change "Connected Directory URL:" option in Oracle Directory Manager from old AD t new one, sinchronization stops. There are no errors in logs, Sinchronization status is "Successful", but the only thing i can see is that "Last Applied Change Number" remains the same all the time, and changes in BASE is not visible in AD!

    Here is content of C:\Ora\INF\ldap\odi\log\xxx.trc file while set to sinc from old AD:
    -------------------------------------------------------------------------------
    Trace Log Started at Tue Jan 11 09:50:13 CET 2011
    -------------------------------------------------------------------------------
    Updated Attributes
    orclodipLastExecutionTime: 20110111095013
    orclodipConDirLastAppliedChgNum: 646178626
    orclOdipSynchronizationStatus: Synchronization Successful
    orclodipLastSuccessfulExecutionTime: 20110111095013

    -------------------------------------------------------------------------------
    Trace Log Started at Tue Jan 11 09:51:13 CET 2011
    -------------------------------------------------------------------------------
    Updated Attributes
    orclodipLastExecutionTime: 20110111095113
    orclodipConDirLastAppliedChgNum: 646178652
    orclOdipSynchronizationStatus: Synchronization Successful
    orclodipLastSuccessfulExecutionTime: 20110111095113

    -------------------------------------------------------------------------------
    Trace Log Started at Tue Jan 11 09:52:13 CET 2011
    -------------------------------------------------------------------------------
    Updated Attributes
    orclodipLastExecutionTime: 20110111095113
    orclodipConDirLastAppliedChgNum: 646178652
    orclOdipSynchronizationStatus: Synchronization Successful
    orclodipLastSuccessfulExecutionTime: 20110111095113

    And here is content of C:\Ora\INF\ldap\odi\log\xxx.trc file while set to sinc from NEW 2008 R2 AD:
    -------------------------------------------------------------------------------
    Trace Log Started at Tue Jan 04 15:00:47 CET 2011
    -------------------------------------------------------------------------------
    Updated Attributes
    orclodipLastExecutionTime: 20110104150047
    orclodipConDirLastAppliedChgNum: 391243683
    orclOdipSynchronizationStatus: Synchronization Successful
    orclodipLastSuccessfulExecutionTime: 20110104150047

    -------------------------------------------------------------------------------
    Trace Log Started at Tue Jan 04 15:01:47 CET 2011
    -------------------------------------------------------------------------------
    Updated Attributes
    orclodipLastExecutionTime: 20110104150147
    orclodipConDirLastAppliedChgNum: 391243683
    orclOdipSynchronizationStatus: Synchronization Successful
    orclodipLastSuccessfulExecutionTime: 20110104150147

    -------------------------------------------------------------------------------
    Trace Log Started at Tue Jan 04 15:02:47 CET 2011
    -------------------------------------------------------------------------------
    Updated Attributes
    orclodipLastExecutionTime: 20110104150247
    orclodipConDirLastAppliedChgNum: 391243683
    orclOdipSynchronizationStatus: Synchronization Successful
    orclodipLastSuccessfulExecutionTime: 20110104150247

    Does anybody have any idea, where is solution of my issue?
    Thanks.

    Edited by: user11294763 on 11.1.2011 1:14

  • RELEVANCY SCORE 2.70

    DB:2.70:Not Able To Add Or Find Subscribers On Unity 4.0.2 Um W/Exchange 2k jk



    I'm getting two error messages. Please read below and let me know if any advice. Thanks in advance.

    When attempting to click on the add button with subscribers, I get the following error:

    Error fetching MailStore list (for server GRSDEX01).

    hr=0x8004010F

    Check that the AVDSGlobalCatalog is registered and running.

    Please see your system administrator for more details.

    When Attempting to click on the find button within subscribers I get the following error:

    Access denied

    Your System Administration session has timed out. All unsaved data has been lost. Use Refresh to reload the current object.

    Please see your system administrator for more details.

    Also in the application log within event viewer I get the following errors:

    The AvDSGlobalCatalog service failed to complete a full directory synchronization between the SQL database on the Cisco Unity server and the directory. Some changes in the directory since the last directory synchronization may not be present in the SQL database. A possible reason for this is that the directory server may be temporarily unavailable. The directory monitor attempts synchronization every 1 minutes. If a subsequent directory synchronization in this domain succeeds, a message indicating success will be logged to the event log, and no action is required. If this message and the subsequent success message are logged multiple times, this may indicate an intermittent network problem. If directory synchronization in this domain continues to fail, another error message will be logged in an hour. Verify the network connectivity between Cisco Unity and the directory server. If the directory server is down and then comes back up, synchronization happens automatically and no action is required. For more information, click: http://www.CiscoUnitySupport.com/find.php

    DB:2.70:Not Able To Add Or Find Subscribers On Unity 4.0.2 Um W/Exchange 2k jk


    Hello,

    I'm having the exact same problem as you, how did you resolve it?

    I appreciate the help.

    John.

  • RELEVANCY SCORE 2.69

    DB:2.69:Any Tricks At Hand To Do Directory Uri Dialing With Ldap But Without Mail Or Msrtcsip-Primaryuseraddress af



    Hi,

    We're trying to integrate Directory URI dialing, Expressway (RMS) and other features in our CUCM 9/10 clusters.

    Currently all is Synced to MS-AD via LDAP Directory synchronization. 

    The synchronization allows you to select the mail or msrtcsip-primaryuseraddress attributes to be used for the Directory URI field. But neither of those contain a valid Directory URI for our installation. 

    Is there an option to get the Directory URI to be synched with, ie. the userPrincipalName attribute?

    Our AD Schema doesn't know the msrtcsip-primaryuseraddress attribute and our Mail addresses domains do not match our default Directory URI domain.

    For us: The AD domain is the Directory URI domain. The users' Directory URI should be "username@ad-domain".

     

    Without LDAP Directory URI synchronisation we cannot set the users default directory uri and the user's primary DN is not matched to his directory uri. And this requires us to configure the directory uri for all DN's

     

    Regards,

    Erik

    DB:2.69:Any Tricks At Hand To Do Directory Uri Dialing With Ldap But Without Mail Or Msrtcsip-Primaryuseraddress af


    No, there is no way to sync CUCM directory URI to anything but:
    For the LDAP User field, choose one of the following values:
    msRTCSIP-primaryuseraddressmailNone
     http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmcfg/CUCM_BK_C95ABA82_00_admin-guide-100/CUCM_BK_C95ABA82_00_admin-guide-100_chapter_01101.html

    From the CUCM side, there is no option to use any other field for the mapping.

    You would need to manually configure each user's directory URI to what it should be.

    On the jabber clients, you can change the mapping for the DirectoryUri and SipUri value to some other field that matches what you should dial in your deployment, but without the same info in CUCM, it won't make a difference.

    If you don't have the msrtcsip-primaryuseraddress  value, you could get it into your schema, fill it with the right directory URI, and then point to it. I'm not an LDAP guy, not sure if the overhead of doing this would be the same as adding the URI to each user, or if you could use some sort of script to take the username and add the right domain.

  • RELEVANCY SCORE 2.69

    DB:2.69:Fim Connected Data Source Error 3c


    I am having issues with the DS-Export in FIM on SharePoint 2013.

    I notice the DS_EXPORT operation is receiving 72 Export Errors... with the Error being 'permission-issue' when running a SharePoint profile synchronization. More specifically the Connected data source error in FIM is: Insufficient access rights to
    perform the operation.
    I have granted the farm and synchronization account 'replicate directory changes' in both the domain and the configuration container (netbios and fqdn for domain are different).

    What permissions could FIM be referring to?

    - Rick

    DB:2.69:Fim Connected Data Source Error 3c

    UPDATE:
    Well, here's a doah! moment... the issue was with the picture profile property in the user profile service. Although the mapping from SharePoint to AD was correct (picturephoto), I had set the attribute to export to AD instead of import to SP... details,
    details, details...- Rick

  • RELEVANCY SCORE 2.69

    DB:2.69:Oim Ad Password Sync Install am


    I am having trouble getting the 9.0.4.1 AD Password Sync working properly and noticed a discrepancy in the installation instructions. When I run the installer on the AD server a dialog box is displayed with the following message:

    Post Installation summary:
    1.Please copy all the jar files from the Oracle Identity Manager installation's lib directory to c:\OracleProvisioningAD\adsynch\lib

    But in the installation document (e10450.pdf) item 2 of step 3 says:

    Copy all the JAR files from the OIM_Design_Console_installation_dir/lib directory on the computer hosting the Oracle Identity Manager Design Console to the ADSYNC_HOME\lib directory on the computer where you install the password synchronization module.

    On my installation these two directories do not contain the same files. Which one is right?

    DB:2.69:Oim Ad Password Sync Install am

    The lib jars from the design console should be sufficient as the AD Sync agent is essentially a client to the OIM server.

    Cheers,

    Deborah

  • RELEVANCY SCORE 2.69

    DB:2.69:Re: Migrating Non Asm To Asm x1


    Hi Chinar/Ahamad,

    Thank you for your time, I started Grid installation, however i am getting error, while selecting grid software location and failing

    I have selected only grid software installation only option,we are not using any clusterware.

    INS-32022] Grid infrastructure software for a cluster installations must not be under an Oracle base directory.Cause-Grid infrastructure for a cluster installations assign root ownership to all parent directories of the Grid home location. As a result, ownership of all named directories in the software location path are changed to root, creating permissions errors for all subsequent installations into the same Oracle base. Action-Specify software location outside of an Oracle base directory for grid infrastructure for a cluster installations.Network Time Protocol (NTP) - This task verifies cluster time synchronization on clusters that use Network Time Protocol (NTP).
    Expected Value
    :n/a
    Actual Value
    :n/a
    List of errors:
    -
    PRVF-7590 : "ntpd" is not running on node "bling" - Cause: The process identified is not running on the specified node. - Action: Ensure that the identified process is started and running on the specified node. If it is one of the clusterware daemons then you can use 'crsctl check' command to check status.

    DB:2.69:Re: Migrating Non Asm To Asm x1

    Step By step guide

    http://mohamedazar.wordpress.com/2010/11/29/grid-infrastructure-installation-guide-for-standalone-server/

  • RELEVANCY SCORE 2.69

    DB:2.69:Ts3212 Errors Occurred During Installation 1j


    errors occurred during installation.

  • RELEVANCY SCORE 2.68

    DB:2.68:Password Synchronization Connector Installation 1p


    Hello friends,
    About Password Synchronization Connector, my query is:
    You can install this connector, with a different user account with administrator account used to start the server in Active Directory.

    thanks

  • RELEVANCY SCORE 2.68

    DB:2.68:Disabled Users - No Items Found cd


    Hello

    I have enabled Directory Synchronization in BPOS and am trying a Forces Synchronization between my AD and MS Online.
    When a force a Sync, I do not get any errors in the applet but the following warning comes up in Event Viewer.
    Also, the Disabled Users List in the Admin Center is empty.
    Any assistance would be appreciated.
    - Peter

    The management agent TargetWebService completed run profile Delta Confirming Import with a delta import or delta synchronization step type. The rules configuration has changed since the last full import or full synchronization.

    User Action
    To ensure the updated rules are applied to all objects, a run with step type of full import and full synchronization should be completed.

    DB:2.68:Disabled Users - No Items Found cd

    Shot in the dark here, but make sure to check your IE settings on the DirSync server. If IE has not gone through the first-run setup, where it asks you to provide search providers and such, this causes DirSync to error out, since it seems to use IE settings
    to contact the remote DirSync servers.

  • RELEVANCY SCORE 2.68

    DB:2.68:Ma/Mv Configurations Synchronization Problem xm


    Dear all,
    I've got (again)a problem with FIM not being able to synchronize MA and MV data.
    The event log shows entries like
    A update on the configuration of a MA or MV failed to replicate to a target connector directory that is capable of storing MA/MV configurations. As a result, the MA/MV configuration data in this connector directory is not up to date. Please correct the
    condition that causes the error, and triggers a resync by updating the password information of the target MA.

    Additional information:
    Error Code: 0x80230709
    Error Message: (The extension operation aborted due to an internal error in FIM Synchronization Service.)

    Operation: Update MA
    Name of the MA to replicate: AD
    Guid of the MA to replicate: {7F231780-74F1-4027-BEDA-34015B58E436}
    Name of the target MA: FIM
    Guid of the target MA: {C73C91E9-A343-40C1-A85B-099D6634E839}
    Usually this error is associated to the fact that the Synchronization Service and the Service Portal components are not updated to the same version, but for what I can see this is not the case now:

    I tried re-entering the password of the FIM MA, but it did not help.
    I checked the FIM MA configuration using the
    FIM MA account configuration quick testand
    Test the FIM MA accountscripts, andbothscript ran without errors.
    I checked if the MPR Synchronization: Synchronization account controls synchronization configuration resources is enabled, and it is.
    Am I missing something? Any other hints?
    Thanks,
    PaoloPaolo Tedesco - http://cern.ch/idm

    DB:2.68:Ma/Mv Configurations Synchronization Problem xm

    Hi Bob,
    I just restarted the services, and now if I try to udpate the FIM schema I get an error. This looks definitely like a database problem, but the permissions for fimma look ok...
    Thanks,
    PaoloPaolo Tedesco - http://cern.ch/idm

  • RELEVANCY SCORE 2.68

    DB:2.68:Ldap Synchronization Failure fm


    Hi All, I've created an LDAP Authentication Source and I'm trying to synchronize with my LDAP directory. The job constantly fails with the attached log. I'm quite confident that the LDAP settings are correct, since the same directory is synchronizing successfully with another Plumtree installation. Since the log mentions a failure to creat the Everyone group for this authentication source, we manually created the everyone group for this source. After that, the job ran, attempting to synchronize every other group in the directory and failing to create all groups. When it came to synchronizing users, it failed completely. Do you have any ideas about this? Thanks.

    DB:2.68:Ldap Synchronization Failure fm

    Under "Select Utility . . ." choose Automation Server and then click on "Job History."
    Hope this helps,
    Chris Bucchere | chris@bucchere.com | www.bucchere.com| 415.516.3941

  • RELEVANCY SCORE 2.68

    DB:2.68:Directory Synchronization ax



    How do I get my publisher and subscriber to synchronize it's database (mainly the directories of the 2 machines).

    DB:2.68:Directory Synchronization ax


    If you are using the embedded DCDirectory. You can use the information at the link below to try and resync your directories.

    http://www.cisco.com/warp/public/788/AVVID/dc_directory.html

    Thank you,

    -Mckee

  • RELEVANCY SCORE 2.68

    DB:2.68:Azure Mfa Directory Sync Errors 8d


    I'm trying to set up directory sync in the Multi-Factor Authentication Server UI. When I run sync, nothing appears to happen and I see an error in the logs.
    Settings - Use Active Directory is selected, include trusted domains is not checked
    Filters - all are at their defaults
    Attributes - all are at their defaults
    Synchronization - Enable synchronization with Active Directory is checked
    Synchronization interval is 24 hours
    Remove users no longer in Active Directory is unchecked
    Always perform a full synchronization is unchecked
    Require administrator approval when disabled or removed users exceed threshold is set to 5

    and under Synchronization items, i have a group in our directory defined

    in the MultiFactorAuthAdSyncSvc log I'm seeing the error
    Couldn't read credential identified by 'PfLdapBind'. Element not found.

    The full log is below.

    2014-11-21T15:05:31.837030Z|i|8148|9132|trace|Starting logging to this file.
    2014-11-21T15:05:31.837030Z|i|8148|9132|pfadssvc|Executable module 'C:\Program Files\Multi-Factor Authentication Server\MultiFactorAuthAdSyncSvc.exe' at version 6.2.1.16387.
    2014-11-21T15:05:31.837030Z|i|8148|9132|pfadssvc|*******************************************************************************
    2014-11-21T15:05:31.837030Z|i|8148|9132|pfadssvc|SERVICE START
    2014-11-21T15:05:31.946384Z|i|8148|9132|pfadssvc|Connected to local Multi-Factor Authentication service for reads: mfaserver1.domain.com
    2014-11-21T15:05:32.290174Z|i|8148|9132|pfadssvc|Connected to master Multi-Factor Authentication service for writes: mfaserver2.domain.com
    2014-11-21T15:05:32.805747Z|i|8148|9132|pfcs|MaxPageSize configured in Active Directory: 1000
    2014-11-21T15:05:32.805747Z|i|8148|9132|pfcs|MaxPageSize to use for paged searches: 1000
    2014-11-21T15:05:32.837003Z|i|8148|9132|pfcs|Active Directory Search Method set to: GC://
    2014-11-21T15:05:32.837003Z|0|8148|6868|smts|Creating named pipe '\\.\pipe\PhoneFactor - PfAdsSvc - Admins'.
    2014-11-21T15:05:32.837003Z|i|8148|6868|smts|Smts pipe awakened.
    2014-11-21T15:05:32.837003Z|0|8148|6868|smts|Connect pipe pending.
    2014-11-21T15:05:32.899571Z|i|8148|5188|pfadssvc|Current feature settings: Active Directory Synchronization = True; Email = True; Extension Dialing = True; Call Rollover = True; User Information = True; Localization = True
    2014-11-21T15:05:32.899571Z|i|8148|5188|pfadssvc|Features will not be read again until there is a configuration change or 12 hours have passed
    2014-11-21T15:05:32.915136Z|i|8148|5188|pfadssvc|Synchronization Interval: 86,400 seconds
    2014-11-21T15:05:32.977633Z|e|8148|5188|credStore|Couldn't read credential identified by 'PfLdapBind'. Element not found. (0x00000490 = 1168)
    2014-11-21T15:05:32.977633Z|e|8148|5188|trace|e|native|creds|#Failed to read credential 'PfLdapBind'.
    2014-11-21T15:05:33.555875Z|i|8148|5188|pfadssvc|Configuration loaded successfully -- sequence 28
    2014-11-21T15:05:33.602654Z|i|8148|5188|pfadssvc|Processing full synchronization to initialize synchronization cookies
    2014-11-21T15:05:33.680781Z|e|8148|5188|pfadssvc|Error initializing user directory synchronization cookie for dc=domain,dc=com: Synchronization cannot continue.
    2014-11-21T15:05:33.680781Z|i|8148|5188|pfadssvc|Synchronization time: 00:00:00.1092902

    DB:2.68:Azure Mfa Directory Sync Errors 8d

    It is recommended to check the Always perform a full synchronization box. Otherwise, the identity that the ADSync service is running as requires special DirSync permissions. There are some details in the help file regarding that setting. The
    full synchronization works well and doesn't require special permissions.

  • RELEVANCY SCORE 2.68

    DB:2.68:I Dont Have Active Directory Synchronization Option In My Pwa User Interface - What I Did Wrong? mc


    hi;
    tell me please what wrong I did in my installation. I don't see this option, I don't see many groups (Portfolio Manager, Team Lead), I don't see 'Global Permissions' with selection of credentials, like 'Manage Check-ins' for example.
    I would be grateful for sugesstions.
    Regards
    BartoszBartosz

    DB:2.68:I Dont Have Active Directory Synchronization Option In My Pwa User Interface - What I Did Wrong? mc

    Bartosz:
    It sounds like you know very little about Project Server. You either need to read everything on TechNet, or consider getting a copy of my book.

    Gary Chefetz, MCITP, MCP, MVP msProjectExperts
    Project and Project ServerFAQs
    Project Server Help BLOG

  • RELEVANCY SCORE 2.68

    DB:2.68:Audiences Multiple Synchronization Connections = 0 Members In Audience... zp


    We are experiencing an issue with audiences.
    We have defined 2 synchronization connections for Active Directory in the User Profile Application:

    Connection 1: OU 1Connection 2: OU 2
    The synchronization finishes without errors.
    We defined a number of audiences which all have a single rule:
    User = member of = AD group from OU 1
    or
    User = member of = AD group from OU 2
    When we compile the audiences, the compilation succeeds without errors for all audiences but the number of members for the audiences with a rule that point toa group in OU 2 (Connection 2) is 0.

    The audiences which point to a group in OU 1 are behaving as expected and show the correct number of members.
    We managed to resolve this issue by deleting Connection 2 and include OU 2 in Connection 1.
    Then all audiences are filled correctly. It's like the audiences don't like 1 synchronization connection.
    We tested this on 3 different environments which target different AD's and have nothing to do with each other and all have the same behavior.
    I even tested this in SharePoint 2013 Beta and we also have the same behavior there.
    Anyone else experiencing this? Bug?

  • RELEVANCY SCORE 2.67

    DB:2.67:Plesk 10.0.1 sa





    Plesk 10.0.1 Migration Manager Not Syncing

    Getting the following error when I try to synchronize the migration agents.

    Error: Errors have occurred during the process of migration agents synchronization.

    The proglem seems to be the same as in this thread.

    http://forum.parallels.com/showthread.php?t=95347

    The pmm_agents folder is missing from the http://autoinstall.plesk.com/PSA_10.0.1/ directory.

    Can we get this up there?

    Thanks

    DB:2.67:Plesk 10.0.1 sa




    Giving this a bump hoping some one at Parallels will see it.

  • RELEVANCY SCORE 2.67

    DB:2.67:Autodiscovery And Auto Agent Rollout m8



    Hello Guys,

    I was going through the documentations and testing evaluation version of FPAC 11.6 version.

    From FootPrints, I have created one Auto Agent Rollout to which I assigned Organization Unit of Active Directory domain and set Termination parameter to "Run Forever". This keeps Rollout forever and never stop the rollout.

    Then adding machines to Organization Unit of Active Directory Domain. Also synchronized Organization Unit of Active Directory with FootPrints which is set to auto synchronization. This synchronization brings machines to FootPrints in target list i.e. Device Group. So FootPrints check for agent and if machine does not have agent installed on it, then FootPrints push agent to it for installation.

    This completely automates Agent Rollout feature.

    This is really Amazing feature...............

    Thanks

    Cool Toad

    DB:2.67:Autodiscovery And Auto Agent Rollout m8


    Hello Guys,

    I was going through the documentations and testing evaluation version of FPAC 11.6 version.

    From FootPrints, I have created one Auto Agent Rollout to which I assigned Organization Unit of Active Directory domain and set Termination parameter to "Run Forever". This keeps Rollout forever and never stop the rollout.

    Then adding machines to Organization Unit of Active Directory Domain. Also synchronized Organization Unit of Active Directory with FootPrints which is set to auto synchronization. This synchronization brings machines to FootPrints in target list i.e. Device Group. So FootPrints check for agent and if machine does not have agent installed on it, then FootPrints push agent to it for installation.

    This completely automates Agent Rollout feature.

    This is really Amazing feature...............

    Thanks

    Cool Toad

  • RELEVANCY SCORE 2.67

    DB:2.67:Installation On C: / Error When Launching Application s9


    Hi all,
     
    Unlike 4.2 version, it seems that installation directory and asset directory are the same directory.
    (This directory is set when clicking on begin monitoring).
     
    In 4.2 version, when installation on C drive is mandatory, i use C:\app as installation and Q:\app as asset directory (see Best practice of sequencing).
    In 4.5, installation and asset directory are both C:\app.
     
    When launching this sequenced application in 4.2, it's working.
    When launching this sequenced application in 4.5, there are a lot of errors because some path on C drive cannot be found (directories and files searched are in VFS).
     
    Do someone encounter this issue ?
    Is it the right way to proceed ?
     
    Thanks,
     
     

    DB:2.67:Installation On C: / Error When Launching Application s9

    To add little something: I would caution against using identical relative path in multiple drives (OP stated that he's using c:\app and q:\app), there's some limitations in VFS about how it handles paths that differ only by drive letter (i.e. it doesn't handle those at all) and you might end up with files virtualized in all the wrong places. There's recent thread going on about this in Softgridguru which I recommend you look at.
     
    /Kalle
     

  • RELEVANCY SCORE 2.67

    DB:2.67:Wfo Qm Version 2.7(2) Recording Issue fm



    It is our first installation of WFO QM.

    We have installed it in a network with a CUCM version 6 and UCCX version 7.

    So far we did not get any errors during the installation and synchronization of these UC servers. However, we are not getting anywhere with the audio recording in QM.

    Any help will be greatly appreciated.

    Thanks in advance

    DB:2.67:Wfo Qm Version 2.7(2) Recording Issue fm


    Thanks for all the info Rommel. Appreciate it.

    Regards,

    Regi

  • RELEVANCY SCORE 2.67

    DB:2.67:Dns ,Dhcp,Dfs Problem 97


    I have a domain controller in windows server 2008 and when i check the event log of dns server i do get the error but when i do nslookup it resolves .. every time i start the server i do get these errors and becos of this i have error with dhcp server
    which is also running in this same server and i have added a additional domain controller with this server and replication with additional domain controller is fine like when i add a user in my domain controller it adds in my additional domain
    controller server aslo

    the dhcp server is is also getting errors The DHCP service failed to see a directory server for authorization.

    The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
    data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
    Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.

    DB:2.67:Dns ,Dhcp,Dfs Problem 97

    Hi,very good post,for your expected dns and other domain related quires you can approach this

    http://www.thewebpole.com/ site ,here only i got my DNS system,also got an Hosting service for publishing website,after that websites are working well,here you too also try this site for more details.

  • RELEVANCY SCORE 2.67

    DB:2.67:2008 R2 Event Warnings And Errors? zz


    Hello, we have a 08 R2 box up in a DC and have a few errors and warnings we get at every boot.Everything seems to work okay but would like to fix or clean up whatever the issues are.They are as follows:The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.Could not connect to the Active Directory. Active Directory Certificate Services will retry when processing requires Active Directory access.The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.After server has been up these seem to go away. Its almost like some things are running in the wrong order or something.No problems seem to exist but we do get worried about errors and warnings that should not be on a new clean install...Any suggestions?Some of these start from boot #1 after a fresh format even after you create the domain...

    DB:2.67:2008 R2 Event Warnings And Errors? zz

    You can eliminate the DFS Namespace service event (Event 14550) on every boot by changing the start type of the DFS Namespace service from Automatic to Automatic (Delayed Start).

  • RELEVANCY SCORE 2.66

    DB:2.66:Palm Sync a8


    We have a new installation of Oracle Calendar. Some of our users are going to require to use Oracle Calendar Sync with various Palm devices. I am testing our setup with a Tungsten E. I am able to sync successfuly using Calendar Sync on a Mac, but on a PC I keep getting the following error:

    0010-00-00-00000016Invalid user information (password and/or user name). (0001-01-00-0001A602) (108034)
    Oracle Calendar Conduit synchronization failed

    0010-00-00-00000016Invalid user information (password and/or user name). (0001-01-00-0001A602) (108034)
    Oracle Contacts Conduit synchronization failed

    0010-00-00-00000016Invalid user information (password and/or user name). (0001-01-00-0001A602) (108034)
    Oracle Tasks Conduit synchronization failed

    The user account settings are the same as on the Mac, so it is highly unlikely that I have got them wrong.

    Does anyone know what these errors mean, and how we might resolve this issue?

    Thanks,

    Chas

    DB:2.66:Palm Sync a8

    Hello Chas,

    I'm having the exact same problem that you had in March, have you solved that problem yet? If you have, how did you do it, please help. Thank you very much.

  • RELEVANCY SCORE 2.65

    DB:2.65:Callmanager Installation Problem 1f



    Folks,

    Trying to install callmanager on a non standard platform. All components of call manager gets installed including dc directory and backup, but, callmanager application does not appear. No errors during installation. when i try to run installation again, i get a message that callmanager is already installed.

    any ideas?

    Thanks

    DB:2.65:Callmanager Installation Problem 1f


    Well first, what do you mean by a non-standard platform? What version of CM?

    Second you can check the install logs for any errors that the system had while installing. What this sounds like is that some of the services did not get registered and are not starting.

    C:\Program Files\Common Files\Cisco\Logs.

  • RELEVANCY SCORE 2.65

    DB:2.65:User Profile Synchronization - Ldap Service Unavailable sc


    I am trying to setup User Profile Synchronization Service. While creating New Connection I am getting the error The LDAP server is unavailable. I think the reason is that my sharepoint farm server is not configured
    properly for Active Directory Domain.
    I noticed that the Active Directory Domain Services has not been running. I tried to run the Active Directory Domain Services Installation Wizard (dcpromo.exe), but it tells me that the port 88 is being used by another service.

    My question:
    1) First thing, please let me know if I am going in the right path to set up User Profile Synschronization.
    2) If yes, should I free (or can I use another the port 88 for Active Directory). How do I change the port ?

    Below si the screen shot of the error.

  • RELEVANCY SCORE 2.65

    DB:2.65:Dirsynch Unexpectedly Stopped Working 1k


    Hi,

    I started receiving these e-mails after the weekend:

    From: MSOnlineServicesTeam@MicrosoftOnline.com

    Subject: Directory Synchronization Unhealthy Notification: Monday, 25 July 2011 18:33:25 GMT

    Microsoft Online Services did not register a synchronization attempt from the Microsoft Online Services Directory Synchronization Tool in the last 48 hours.

    Please check the Applications Event Viewer of the computer that is designated to synchronize your Active Directory with Microsoft Online Services to troubleshoot this issue. See Directory Synchronization Errors for more information about this issue.

    Here's what I find in my Event Viewer:

    Server Fault: The request failed with HTTP status 401: Unauthorized.

    The management agent TargetWebService failed on run profile Delta Confirming Import because the server encountered errors.

    The Management Agent failed on execution. Error returned is 'stopped-server-down'

    I would open a ticket for this with BPOS support, but when I log into my admin site, and click on the Support tab, I get this:

    Server Error
    Server is busy or you lost your Internet connection.

    So here I am on the forum, asking for help. Any ideas?
    Thanks!
    John

    DB:2.65:Dirsynch Unexpectedly Stopped Working 1k

    Yes, we created a new account in Active Directory to do this and reconfigured the app. It works now.

  • RELEVANCY SCORE 2.65

    DB:2.65:How Do I Configure Adc In Iplanet Meta-Directory Server For Synchronization With Windows Active Directory? z3


  • RELEVANCY SCORE 2.64

    DB:2.64:User Profile Synchronization - Active Directory Export Not Working j8


    SharePoint 2013, ...
    We currently have Profile Synchronization setup with Active Directory and all the properties set to Import are working just fine. I have added a custom property (pager for testing purposes) and set the synchronization direction to export.
    Everything seems to be working (no errors that I am seeing), but AD is definitely not being updated.
    I've checked and double-checked all the perms on the AD side per requirements here: http://technet.microsoft.com/en-us/library/hh296982.aspx
    I'm almost guessing that the issue here might be on the SharePoint side, ... from the sync log:

    Stage Active directory export
    Additions 0
    Updates 0
    Unchanged 0
    .............................
    Successes 0
    Failures 0
    Anyone have any tips on troubleshooting this?

    DB:2.64:User Profile Synchronization - Active Directory Export Not Working j8

    Achtung! es werden keine Daten von Sharepoint ins AD geschrieben wenn der User in einer schützenswerden Gruppe ist!
    Stichpunkt: AdminSDHolder, adminCount
    http://www.serverhowto.de/Der-AdminSDHolder.477.0.html

  • RELEVANCY SCORE 2.64

    DB:2.64:Create Mail-Enabled Contacts From Sql User Database sp


    We are using the SQL membership/profile provider to store user accounts for our MOSS 2007 installation. I need to create mail-enabled contacts (Exchange 2003) in our Active Directory automatically when new accounts are established.
    Are there (affordable) tools out there that will handle the synchronization?

    DB:2.64:Create Mail-Enabled Contacts From Sql User Database sp

    I don't think this is a SharePoint question. You might want to try posting this in either AD or SQL.Imagine what we could be...If we could just imagine. Daniel A. Galant

  • RELEVANCY SCORE 2.64

    DB:2.64:How To Fully Delete The Object From Fim? cx


    Hello!
    We are synchronizing user and group accounts via FIM Oracle MA to the FIM portal (FIM MA), and then to the Active directory (AD MA).

    We have some groups objects, that account name contains restricted symbols like /. We have created the filter for restricted symbols in the Oracle and the new groups has provisioned in the active directory. When the synchronization cycle to the AD finishes,
    we have errors generated The name provided is not a properly formed account name from old invalid group objects. I was tried to delete ERE, disconnect connectors (which deletes metaverse object too), but after the next synchronization cycle, the error is
    back. How to delete completely these groups from FIM?
    Thanks!

    DB:2.64:How To Fully Delete The Object From Fim? cx

    One way is to...
    1. In Metaverse: Disconnect all MAs, disconnect FIM Service MA last. This will delete object in Metaverse.
    2. In FIM Portal delete object
    3. Import the delete in FIM ServiceMA to delete the object from the FIM Service MA Connector Space.
    4. Delete in other Connected Data Sources (if required) and import the delete to prevent projection from re-recreating the object in Metaverse and FIM Service.

  • RELEVANCY SCORE 2.64

    DB:2.64:{Pswsync}*On-Demand*Synchronization*Required* xx


    Hi all,
    i had successful installed the "Sun ONE Directory Server 5.2" and "Identity Synchronization For Windows 1.0", then i started to synchronize the password from AD to Sun One Directory Server, but why the userpassword attribute always showed "{PSWSYNC}*ON-DEMAND*SYNCHRONIZATION*REQUIRED*", what does the on-demand synchronization mean and how to test that if the synchronization work fine? Could you help? Thanks.

    DB:2.64:{Pswsync}*On-Demand*Synchronization*Required* xx

    I figured it out, setup pam.conf exactly as per the sample supplied in "System Administration Guide: Naming and Directory Services (DNS, NIS, and LDAP) " and the solaris client recognises the new password immediately

  • RELEVANCY SCORE 2.64

    DB:2.64:Installation Issue With Vs2008, Sync Framework And Sync Services mf


    Hi,
     
    I have installed
     
    VS2008
    CTP1Refresh (to keep up to date with the sync framework)
    SQLServer Compact 3.5 (to gain ssce)
     
    When I open and compile the SharingAppDemo supplied as part of \Microsoft Sync Framework\v1.0\Runtime\ADO.NET\V2.0\Samples\
     
    I get the following types of errors
     
    Error 1 The type 'Microsoft.Synchronization.SessionProgressEventArgs' exists in both 'c:\Program Files\Microsoft Sync Framework\v1.0\Runtime\x86\Microsoft.Synchronization.dll' and 'c:\Program Files\Microsoft Synchronization Services\ADO.NET\v1.0\Microsoft.Synchronization.Data.dll' C:\Program Files\Microsoft Sync Framework\v1.0\Runtime\ADO.NET\V2.0\Samples\SharingAppDemo-ColumnMapping\app\ProgressForm.cs 68 37 SharingAppDemo-ColumnMapping
     
    I have looked at what is in the Microsoft Sync Framework directory and Microsoft Synchronization Services directory and I can see different versions of various dll.
     
    So I am guessing that my installation is in need of repair. I have been unable to locate information as to what precise steps I need to take in order to use VS2008 to develop/explore the sync framework.
     
    So any advice on how to produce a correct install would be appreciated.
     
    Regards
     
    Aidan

    DB:2.64:Installation Issue With Vs2008, Sync Framework And Sync Services mf

    could you try to re-set the references to the sync service 2.0 assemblies ?
     
    thanks
    Yunwen

  • RELEVANCY SCORE 2.64

    DB:2.64:Set Values For Prevent Active Directory Synchronization For This User z7


    Hi
    I am trying to set up Active Directory Synchronization for users in Project Server 2010. I would like to disable the Active Directory Sync thereafter.
    Is there a way I can change the value forprevent active directory synchronization for this user pro grammatically?

    DB:2.64:Set Values For Prevent Active Directory Synchronization For This User z7

    Hi
    I am trying to set up Active Directory Synchronization for users in Project Server 2010. I would like to disable the Active Directory Sync thereafter.
    Is there a way I can change the value forprevent active directory synchronization for this user pro grammatically?

  • RELEVANCY SCORE 2.64

    DB:2.64:Cannot Add Subscriber 8d



    Hi

    I run Unity 4.0(3)SR1 Voicemail only, with Exchange 2k on box.

    Unity is a member server in an existing domain.

    Unfortunately I get an error message when I click Add Subscriber Button:

    Error fetching MailStore list (for server UVMLZW02).

    hr=0x8004010F

    Check that the AVDSGlobalCatalog is registered and running.

    I checked the Service and made sure Permissions wizard run successfully, with no results.

    Furthermore I got some errors in Event Log, which I believe are related to the problem:

    Event Type: Error

    Event Source: CiscoUnity_AvRdbSvr

    Event Category: Startup

    Event ID: 21000

    Date: 10/6/2004

    Time: 9:58:34 PM

    User: N/A

    Computer: UVMLZW02

    Description:

    Failed connecting to underlying database using: provider=SQLOLEDB;driver={SQL Server};Data Source=UVMLZW02;Initial Catalog=UnityDb;uid=Administrator;pwd=?}: 80004005

    Event Type: Error

    Event Source: CiscoUnity_DSGC

    Event Category: Error

    Event ID: 1012

    Date: 10/6/2004

    Time: 9:58:34 PM

    User: N/A

    Computer: UVMLZW02

    Description:

    Initialization of AvRdbSvr failed [0x80048807; ??].

    Event Type: Error

    Event Source: CiscoUnity_DSGC

    Event Category: Error

    Event ID: 1031

    Date: 10/6/2004

    Time: 9:58:34 PM

    User: N/A

    Computer: UVMLZW02

    Description:

    The AvDSGlobalCatalog service failed to complete a full directory synchronization between the SQL database on the Cisco Unity server and the directory. Some changes in the directory since the last directory synchronization may not be present in the SQL database.

    A possible reason for this is that the directory server may be temporarily unavailable.

    The directory monitor attempts synchronization every 1 minutes. If a subsequent directory synchronization in this domain succeeds, a message indicating success will be logged to the event log, and no action is required. If this message and the subsequent success message are logged multiple times, this may indicate an intermittent network problem.

    If directory synchronization in this domain continues to fail, another error message will be logged in an hour. Verify the network connectivity between Cisco Unity and the directory server. If the directory server is down and then comes back up, synchronization happens automatically and no action is required. DNS should also be verified to ensure that AvDSGlobalCatalog can resolve the domain controller name.

    I checked for network / dc issues, but there are none.

    Many thanks for your suggestions

    Regards

    Roger

    DB:2.64:Cannot Add Subscriber 8d


    Hi

    The domain controller is another Unity server and I did not change anything on the domain policies.

    In SQL Enterprise Manager I can connect to the DB, open Tables, modify values... so SQL should work ok.

    The thing is, that today, 36h after the installation I realised, that the add subscriber menue miraculously worked....???

    Is there something in the Cisco way of installing Windows 2000 as domain controller for Unity Voicemail that changes the behaviour of the GC/AD synchronisation?


  • RELEVANCY SCORE 2.64

    DB:2.64:Syntax Error When Synchronizing *.Msg Files m8



    I am running SyncToy 2.1, version 2.1.0.0.
    When synchronizing folders that contain Outlook messages saves as *.msg files, I recieve the message Error: Cannot write to the destination file. The filename, directory name, or volume label syntax is incorrect (Exception from HRESULT: 0x8007007B)...
    If I modify the synchronization settings to exclude *.msg files, the synchronization runs without errors.
    I have browsed this SyncToy support forum and haven't found any posts that relate to this error.
    Any help would be appreciated.
    Thanks.

    DB:2.64:Syntax Error When Synchronizing *.Msg Files m8

    I know it's a long shot but I had this error message when trying to write files from a local drive to a mapped SharePoint location. The problem came down to the name I'd used when I mapped the SharePoint library. I'd mapped it as something like this:
    Z: -- \\intranet\myteams\erp\Shared%20Documents
    and kept hitting this issue. However, when I mapped it like this:
    Z: -- \\intranet\myteams\erp\Shared Documents
    it worked.

  • RELEVANCY SCORE 2.64

    DB:2.64:Dc Directory Synchronization 9j



    Is it possible to synchronise a Directory-server, like Notes,Exchange,ccMail etc? On the Callmanager I see Synchronization agents under DC directory admin. But do they work?

    Regards,

    Sascha

    DB:2.64:Dc Directory Synchronization 9j


    for example, if a customer has a callmanager and a pabx, connected via Qsig and he has the pabx-directory in an Notes-server. He wants to have all Notes-directories in the callmanager, so he can look up extensions from one database. (You don't want a customer to search in 2 or more places)

    Regards

    Sascha

  • RELEVANCY SCORE 2.63

    DB:2.63:Wsus 3.0 Sp1 - Clients Displaying Not Yet Reported In Console 1z


    Hi all, I know this issue has been posted previously, but none of the presented solutions appear to be resolving the problem for me.  I initially had WSUS 3.0 deployed and I was experiencing the same problem.  I upgraded to SP1 and I'm still experiencing the same issue.  I've gone through all the recommended resolutions, verifying virtual directory permissions, folder permissions, registry permissions, adding annonymous access where required and I'm still not having any luck.  I've run the client diagnostics tool and that doesn't report any errors, and there aren't obious errors in any of the log files.  I deployed a fresh installation in a virtual lab environment which seems to be working fine, and I've been using that as a reference for permissions etc...  The only errors/warnings that seem to be reported are the following from the c:\windows\windowsupdate.log fileWARNING: Setup callback ReportProgress failed: 0x8007000dWARNING: Cached cookie has expired on new PID is availableAt the bottom of the log it reportsAutomaticUpdates Success Software Synchronization Windows Update Client successfully detected 0 updatesAutomaticUpdates Success Pre-Deployment Check Reporting client status.That is the last line in the log file...  Required updates are detected and installed it seems, but I just don't see the client status being reported to the WSUS server.  Any suggestions?TIA!Derek

    DB:2.63:Wsus 3.0 Sp1 - Clients Displaying Not Yet Reported In Console 1z

     
    Just thought I'd provide further details. 
    +++++++++++  PT: Synchronizing server updates  +++++++++++        + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://backup/ClientWebService/client.asmx     Initializing simple targeting cookie, clientId = f32e9a43-b778-48df-81b7-c3aa907dad0c, target group = DPM Computers WSUS, DNS name = dpreece.dpm.local   Server URL = http://backup/SimpleAuthWebService/SimpleAuth.asmx      WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200     WARNING: SOAP Fault: 0x00012c     

    The log extract was the single most useful thing posted to date, Derek. This 0x8024400D error with SOAP Fault 0x12c on the SimpleAuthWebService is, in fact, a known issue, sometimes combined with 0x80244015 errors.
    1. The 0x8024400D/0x80244015 errors have shown up as a result of an Office update issue. See this blog post (resolution included here) for more details:http://blogs.technet.com/wsus/archive/2008/06/18/client-server-synchronization-issues.aspx2. Also, this scenario has been observed in some load balancing scenarios. Review this blog entry for more details and a resolution if the server is deployed in a load-balancing scenario:http://blogs.technet.com/sus/archive/2008/10/29/wsus-clients-fail-synchronization-with-0x80244015-and-0x8024400d-errors.aspx.
     
     Lawrence Garvin, M.S., MCITP:EA, MCDBA
    Principal/CTO, Onsite Technology Solutions, Houston, Texas
    Microsoft MVP - Software Distribution (2005-2009)

  • RELEVANCY SCORE 2.63

    DB:2.63:Dirsync Identitydatavalidationfailed ak


    Hello,

    We are getting an error message from DirSync on a disabled SMSCliToknAcct account that is quite annoying (MSOnline sends an email reporting the same error every 3 hours)
    This is the error message. Any help is appreciated.
    See Directory Synchronization errors
    for more information about the errors listed in this email message.
    The Directory Synchronization batch run was completed on
    Tuesday, 09 September 2014 15:38:47 GMT for tenant WXXX[wxxx.onmicrosoft.com]. The following errors occurred during synchronization:

    Identity

    Error Description

    On-premises object ID

    SMSCliToknAcct@wxxx.org

    Unable to update this object in Windows Azure Active Directory, because the attribute [Username], is not valid. Update the value in your local directory services.

    oYZ0Oibqkarqd3VXXVO6A==

    Tracking ID: d8c4ff31-e4bb-4ed4-aae7-874ace8c062c
    Thank you, The Windows Azure Active Directory Team

    DB:2.63:Dirsync Identitydatavalidationfailed ak

    Hi Steven,
    This is the forum to discuss questions and feedback for Microsoft Office client. Since your query is directly related to
    Active Directory, I would suggest you to post in the forum of
    Microsoft AzureAzure Active Directory, where you can get more experienced responses:
    http://social.msdn.microsoft.com/forums/azure/en-US/home?forum=WindowsAzureAD
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,

    Ethan Hua
    Forum Support

    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • RELEVANCY SCORE 2.63

    DB:2.63:Installation Problems d1


    Whenever I try to install a program, I get errors that say "An erroroccurred while attempting to create the directory..."