• RELEVANCY SCORE 5.28

    DB:5.28:M60 Wheel Problem xk




    Hi : D

    DB:5.28:M60 Wheel Problem xk

    Yep we can turn the wheel and see the page go down or up but his button doesn't works. What do you mean with different program ? I tried to change with the offcial program the buttons for exemple change the right click to the wheel button etc but for every fonction the wheel button never works

  • RELEVANCY SCORE 4.59

    DB:4.59:M60 Scroll Wheel j8




    Hello

    DB:4.59:M60 Scroll Wheel j8

    Check the area around the scroll wheel and see if there is any hair/dust buildup that may cause it.

  • RELEVANCY SCORE 4.30

    DB:4.30:M60 Scroll Problem 3m




    I have had my M60 for about 3 months now (awesome mouse by the way) and I have had no issued what so ever until a week ago.

    DB:4.30:M60 Scroll Problem 3m

    I had the same problem. It's the actual physical wheel that's faulty. I had the same problem. It gets stuck between 'clicks' as you roll the wheel. I had mine replaced because there is no fixing it.

  • RELEVANCY SCORE 4.05

    DB:4.05:M60 Mouse Configuration Disappearing ca


    I've run across a bizarre problem with my M60; one that prevents me from reconfiguring it. When I plug the mouse into a USB port it's never been on before, Windows recognizes it correctly and the M60 software works as intended. Upon rebooting, however, the M60 shows up in Device Manager as HID-compliant mouse and the configuration options in the M60 software are all greyed out. I can get the configuration back if I plug it into another port, but I'm swiftly running out of USB ports to do this with--and anyway, this is a silly thing to have to do.

  • RELEVANCY SCORE 4.05

    DB:4.05: Satellite M60 Beep Codes jk


    I started up my Satellite M60 this morning and it went beep (pause) beep beep beep and nothing came up on the screen. I had to press and hold the power switch to power off. After a while I tried again and this time it started up OK. But I would like to know what this code means, in case it is indicative of a problem that is likely to become more permanent in the near future.

    Is there a list of Toshiba BIOS beep codes anywhere?

    DB:4.05: Satellite M60 Beep Codes jk

    ASP = Authorised Service Provider.

    If you go there: http://eu.computers.toshiba-europe.com you can use a nice option called "Find an ASP" in the right middle of the screen.

    Ok, seems you're very satisfied with your notebook, hope mine will live as long as yours .

    And if this beep code thing happens again, just try and remove your upgraded memory to test, if perhaps this is what causes your system beeps.

  • RELEVANCY SCORE 4.05

    DB:4.05:Vengence K70 - Volume Wheel Problem (???) 7s


    Hi everyone,

  • RELEVANCY SCORE 3.78

    DB:3.78:Cannot Find The Corsair M60 Mouse, Plug The M60 Into A Usb Port! x1


    DB:3.78:Cannot Find The Corsair M60 Mouse, Plug The M60 Into A Usb Port! x1

    This is something we are currently looking into. We have seen a few reports of users not being able to use the mouse on specific USB ports, but will work on others. Points to a potential issue with motherboard drivers / controller.

  • RELEVANCY SCORE 3.72

    DB:3.72:Funky M60 Usb Ports af



    Has anyone noticed a difference between using the 3 available USB ports on the M60? I've found that if I hook up my IPAQ 2200 to sync using the USB ports at the back, ActiveSync does not connect the device.

    When I connect it to the USB port on the right of the M60, the PDA is detected and ActiveSync runs. I've noticed a similar problem when trying to hook up external USB drives.

    I haven't yet run a detailed diagnostic check, so my motherboard may have some faulty USB ports,

    DB:3.72:Funky M60 Usb Ports af

    Make sure you install the latest Dell Notebook System Software, and after the reboot, update all your USB Controllers "automatically" within Device Manager.

  • RELEVANCY SCORE 3.67

    DB:3.67:Vengeance M60 Configuration x3


    Hi,

  • RELEVANCY SCORE 3.44

    DB:3.44:Precision M60 With Truemobile 1300 Wlan Mini-Pci Card Will Not Connect To The Internet a1



    I have been working on this problem for 2 days now with no results. I just received my Dell M60 with TrueMobile 1300 WLAN Mini-PCI Card and I am trying to connect to my wireless network. I have a Linksys Instant Wireless router BEFW1154. I can connect to my network fine and even share files and printer but I cannot get out to the internet from the m60. I can plug a network cable into the M60 and instantly be online to the internet. I even installed my Linksys wireless Network PC Card on the M60 and it works perfect fine as well.

    What is it with the with TrueMobile 1300? Any Ideas??

    DB:3.44:Precision M60 With Truemobile 1300 Wlan Mini-Pci Card Will Not Connect To The Internet a1


    I have been working on this problem for 2 days now with no results. I just received my Dell M60 with TrueMobile 1300 WLAN Mini-PCI Card and I am trying to connect to my wireless network. I have a Linksys Instant Wireless router BEFW1154. I can connect to my network fine and even share files and printer but I cannot get out to the internet from the m60. I can plug a network cable into the M60 and instantly be online to the internet. I even installed my Linksys wireless Network PC Card on the M60 and it works perfect fine as well.

    What is it with the with TrueMobile 1300? Any Ideas??

  • RELEVANCY SCORE 3.28

    DB:3.28: Satellite M60-104 - Vertical Lines On The Lcd dd


    Hello guys,

    I have a Toshiba Satellite M60-104 and the last few months I noticed vertical lines on the LCD. How can I resolve the problem?

    Any answer will be helpful,

    thanx

    DB:3.28: Satellite M60-104 - Vertical Lines On The Lcd dd

    Hello

    First you should check if you have the same issue on an external monitor. So you can make sure if the problem is the graphic card or display.

    However, I think the mainboard or display must be replaced. For this you can go to an authorized service provider.

    Greets

  • RELEVANCY SCORE 3.25

    DB:3.25:Question About M60 3p


    Hi,

  • RELEVANCY SCORE 3.24

    DB:3.24:M60 M65 Wheel Question cf


    Although I'm thinking of buying one of the above mainly for gaming, I will also need one for forum work where I need to get from a lot of the top post to the unread one at the bottom very fast and so on my present mouse use the middle wheel in freewheel status where I spin it freely without ratcheting.

    DB:3.24:M60 M65 Wheel Question cf

    There's always the home and end keys on the keyboard.

  • RELEVANCY SCORE 3.24

    DB:3.24:M60 Floppy Boot d9


    I have not been able to get my M60 to boot from a floppy regardless of whether it is USB attached or in the bay. My BIOS is A06. It seems to me that it was able to boot from floppy back at A03. Is anyone else having this problem? Any solutions?

    DB:3.24:M60 Floppy Boot d9

    You may have already checked this, but, in case you did not...

    Go to the BIOS setup and check the booting options. Make sure USB booting is set before the HD booting in the boot sequence options.


    Good Luck!

  • RELEVANCY SCORE 3.24

    DB:3.24: Satellite M60-170: Express Media Player Will Not Load m1


    Hello,

    I guess I have a problem with express media player on my satellite m60-170.

    I have inserted an audio disk or a dvd and the laptop is not operating.

    When I press the cd/dvd button, instead of "acting" the way it should, it just loads windows (like pressing the power button), opens the media player and starts playing the disk...

    (The cd/dvd button is assigned to "cd/dvd")

    any suggestions?

    thanx.

    DB:3.24: Satellite M60-170: Express Media Player Will Not Load m1

    Hi

    If you have not formatted the HDD so the express media player should be preinstalled on your HDD. But if you have changed something on the HDD so it’s possible that your have no media player on the HDD.

    The EMP should be preinstalled on the own partition. Check it in the computer management.

    I have found many topics about express media player

    Check this:

    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5476messageID=18684

    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10024messageID=35450

    I have used the “Advanced search”. Use it and search for express media player.

  • RELEVANCY SCORE 3.24

    DB:3.24:Assigning The Button - M60 1x


    Okay, I just got this mouse today, great mouse, i like it! The problem is How to assign the button???

  • RELEVANCY SCORE 3.15

    DB:3.15: Satellite M60: Image Printed Is Much More Yellow Than Image On Screen 3m


    I use a Hewlett-Packard PSC 750 printer with my Toshiba M60. Problem is, when I print an image, what's printed is much more yellow than what's on screen. The problem did not occur with my old Packard Bell.

    Has anyone a solution?

    DB:3.15: Satellite M60: Image Printed Is Much More Yellow Than Image On Screen 3m

    Mostly such color differences appears because of missing of the one printing colour, different printer settings or different kinds of paper.

    The notebook has nothing to do with such issues.

    Possibly the printer cartridge is empty

    What you can do is also checking the printer settings. Go to the settings and choose printer and faxes. Then right click on you printer and choose printing preferences and properties.

    There I would recommend checking whole options.

  • RELEVANCY SCORE 3.04

    DB:3.04:Problem With Processor Pentium M750 And Dell Precision M60 9x


    I have a dell precision M60, updated my BIOS to the version A08, I changed my processor to put a pentium M750(1.86GHz) but my BIOS says the clock is only 1.4GHzand mywindows operating system says 1.86GHz. I have a feeling I should believe my BIOS, so where is the problem?

    DB:3.04:Problem With Processor Pentium M750 And Dell Precision M60 9x

    I have a dell precision M60, updated my BIOS to the version A08, I changed my processor to put a pentium M750(1.86GHz) but my BIOS says the clock is only 1.4GHzand mywindows operating system says 1.86GHz. I have a feeling I should believe my BIOS, so where is the problem?

  • RELEVANCY SCORE 3.04

    DB:3.04:Help: Dual External Monitors For M60 p1


    Hello,

    I have M60/Windows-XP with nVidia Quadro FX Go700, and I'm trying to connect two external
    monitors to this M60 with D/Dock that has the VGA and DVI connectors.
    I've spent some time, but so far NO luck.

    What I tried were as follows:
    (Try-1) Connected one monitor to VGA connector and the 2nd monitor to DVI
    The 2nd sreen says "NO signal"! Why?

    (Try-2) Someone told me that I need a video splitter, so I've got one.
    I see the same picture on both monitors that are connected to the splitter.

    Can anyone help me to resolve this problem?
    What is a right way to have two external monitors for M60? Or,
    do I need any special graphics board???

    Your any clues are highly appreciated.

    DB:3.04:Help: Dual External Monitors For M60 p1

    I would either call Dell and ask what they have to fit. Or, you could bring the D-Dock to your local computer store and see what they have. You should tell whomever you inquire with if you have any special video needs (open GL or ?) which may limit your video card selection.
    Good luck!

  • RELEVANCY SCORE 3.02

    DB:3.02:Precision M60 Won't Start Need To Fix It To Give In Work, Help Needed, Urgently ff


    I have a precision M60 with windows XP profesional, it won't start at all. The energy supply is connected, the battery is charged, since both indicator lights are lit.
    I tried to start the computer and nothing happend, although for the first 15 minutes all the indicator lights on the computer lighted up every 10 seconds or so. No it is completely dead.
    What is the problem with it? what can I do?
    thanks

    DB:3.02:Precision M60 Won't Start Need To Fix It To Give In Work, Help Needed, Urgently ff

    I have a precision M60 with windows XP profesional, it won't start at all. The energy supply is connected, the battery is charged, since both indicator lights are lit.
    I tried to start the computer and nothing happend, although for the first 15 minutes all the indicator lights on the computer lighted up every 10 seconds or so. No it is completely dead.
    What is the problem with it? what can I do?
    thanks

  • RELEVANCY SCORE 3.02

    DB:3.02:M60 W/ Port Replicator Times Out Pda Connection fc



    I have an HP Jornada PocketPC connecting to an M60 for synchronization. This has worked great until I added a Port Replicator. The USB connection seems to time-out after 3-4 minutes. If the sync is still running it hangs-up, but the session will also time out even after the sync has been completed, going to a "not Connected" state. I have to reseat the PDA in the cradle to reestablish a link, which will time-out again after 3 minutes. the IR connection works fine, and the USB works fine directly to the M60. The problem seems to be with the Advanced Port Replicator.

    Anyone else seen this problem?

    DB:3.02:M60 W/ Port Replicator Times Out Pda Connection fc


    Hello Carel

    here is another user having big problems using my new TRUST 4PORT USB 2.0 HUB , the system froze each time i pluged into the usb port and then abend (blue screen )this happened over and over agin with just a modem and a printer plugged in.the port has its on electricity as recommended in point 6 of your trobleshooting write up.taking out the printer out made no difference.i have dell insprion 4000.

    talking to different people finally i was directed to your message and i tried step by step in your troubleshooting write up from 1 to 7here is what happened now to point 3" try removing the usb port and redetect" succesfully was able to remove the USB ROOT HUB device icon but now my problem is much bigger I HAVE NO MORE CONNECTION and having talked here to the uk help desk they told me to bring the product back to the shop BUT i just cannot believe this since if i REMOVE a device icon there mut be a way to rectivate the same.

    i have restarted the installion altogether but there seems to be major fault in as much that the light no longer shows on the hub itself , the currency is there but the second LED light is dead.

    can you pls help.

    thank you ...

    finglais

  • RELEVANCY SCORE 2.99

    DB:2.99: Satellite M60-188 - Battery Doesn't Charge jz


    Hi,

    I recently got a Satellite M60 and this morning when I plugged back the charger the battery indicator in the task bar showed a full battery when there was actually only 4% left. And sudenly my computer stopped after bipping for a few minutes because the battery was low.

    This is my second Satellite (the other one was aM70 and I changed the battery and the charger of the M70 but the problem remained the same) and now with my M60 it seems to be the exact same problem (I only had the M60 for two weeks), I don't understand how the battery could already be damaged, after 2 weeks.

    If anybody can help me, thank you

    DB:2.99: Satellite M60-188 - Battery Doesn't Charge jz

    Hi

    I assume your „new“ Satellite M60 notebook was not a new one and it’s a second hand notebook. So the battery and AC/DC adaptor are also second hand parts or do you use them from the Satellite M70?

    However, I think your battery is simply faulty and must be replaced. If your notebook runs with AC/DC adaptor connected there should not be a problem with the mainboard I think but a notebook technician can check this…

  • RELEVANCY SCORE 2.99

    DB:2.99:Isdn Modem For M60 pc



    I tried to install a modem ISDN Zyxel omni.net II on my Precision M60. I have several problems: a) When I install the modem on M60 this one starts again automatically when the modem is connected on port USB. b) When I connect M60 in D/Port I manage to install the piles of the modem. But when I try to establish a connection in mode "dial-up" I do not manage to reach my provider. I obtain an error message with a problem of port which is not free.

    How can I fix that?

    Thanks,

    li3c

    DB:2.99:Isdn Modem For M60 pc

    Hi I have the same problem.

    When I connect my zyxel omninet USB II modem I have a crash with a Blue Screen and STOP 0x0000007E.
    I have installed the latest driver downloaded from zyxel site.

    How can I resolve my problem???

    Regards

  • RELEVANCY SCORE 2.97

    DB:2.97:M60 Scroll Wheel d7


    Hello Corsair

  • RELEVANCY SCORE 2.97

    DB:2.97:I'M Doing It Right? 3s


    Hello, i have M60 with faulty scroll wheel.

    DB:2.97:I'M Doing It Right? 3s

    Ok never mind, RMA request approved :)

  • RELEVANCY SCORE 2.97

    DB:2.97: Need Vista Drivers For Satellite M60-139 ja


    My note book is Satellite M60-139 and i've installed windows Vista 32-bit I cant find any support for drivers tools for my Toshiba.

    Please help me I have big problem.

    DB:2.97: Need Vista Drivers For Satellite M60-139 ja

    Hello

    Akuma is right. Old notebook models are not Vista supported. Maybe you will be able to fin some drivers googling arround but toshiba doesnt offer any toshiba specific tool or utility for this notebook model.

    Have you already installed Vista? How it looks like in device manager?

  • RELEVANCY SCORE 2.97

    DB:2.97: Power On With Powersupply Is Not Possible On Satellite M60-167 zk


    Hi,

    I'm sorry for my unperfect english. I have a problem with my Satellite M60-167. When I have connected the notebook with Powersupply and push the "Power-Button", then does'nt start the notebook.

    When I use only the battery-pack and push a lot of times the "Power-Button", than the notebook will started.

    Question: It this a hardware-problem or not. This notebook I bought in january 2006.

    Can you hlep me?

    Thank you for your theory's.

    Ax.

    DB:2.97: Power On With Powersupply Is Not Possible On Satellite M60-167 zk

    Hello Angela

    If the warranty is still valid, why you do not check the notebook by technicians? Maybe they have experience with this issue and it can be fixed pretty fast.

  • RELEVANCY SCORE 2.97

    DB:2.97:More M60 Problems k7


    This is my third M60 now, and while this doesn't have the rattling middle mouse button as bad as the others, this one has now developed a problem in which the mouse will stop tracking. The buttons all continue to work, but it won't start tracking until I unplug the USB cord and plug it back in. I can use the same port or a different one.

    DB:2.97:More M60 Problems k7

    Wow so many tickets, haha. Ignore every ticket except 5652324. Fill out that ticket as I requested (I replied to you) and then reply back that ticket so I know you have done so. I'll take care of the rest.

  • RELEVANCY SCORE 2.97

    DB:2.97:Problem With M60 Sniper Button With Assigned Application And Other Stuff kz


    I got the M60 a few months ago, and I've been loving it. I just recently discovered the Application Assignment feature under the Manage Profile tab for the software.

    DB:2.97:Problem With M60 Sniper Button With Assigned Application And Other Stuff kz

    Make sure the profile is saved to the M60 and hardware playback is enabled. Then try the side button assigned tab and see if it works.

  • RELEVANCY SCORE 2.97

    DB:2.97:M60 Dimensions da


    1234567890

    DB:2.97:M60 Dimensions da

    Please view the product page on

  • RELEVANCY SCORE 2.97

    DB:2.97:Corsair M65 Scroll Wheel Loose And Rattles zf


    Recently Corsair replaced my M60 mouse with the M65 due to what I think was a problem with it's laser. After opening my M65, I noticed the scroll wheel was loose and would rattle from side to side. There's a few spots on the scroll wheel where while in that position, it feels more solid.

    DB:2.97:Corsair M65 Scroll Wheel Loose And Rattles zf

    Contact customer service via phone and tell them your replacement mouse is faulty.

  • RELEVANCY SCORE 2.97

    DB:2.97:M60 M90 Weight k9


    What is the weight of the M60 and M90 mice?

    DB:2.97:M60 M90 Weight k9

    What is the weight of the M60 and M90 mice?

  • RELEVANCY SCORE 2.97

    DB:2.97:Dell M60 Video Problem 18


    My dell m60 precision has a dark screen and if i plug in my crt video and switch to it my screen is flickering like matrix. I gather that my video card is gone. Can anyonw tell me if there are spare video cards avaiabale in europe?

    thanks

    DB:2.97:Dell M60 Video Problem 18

    My dell m60 precision has a dark screen and if i plug in my crt video and switch to it my screen is flickering like matrix. I gather that my video card is gone. Can anyonw tell me if there are spare video cards avaiabale in europe?

    thanks

  • RELEVANCY SCORE 2.94

    DB:2.94:M90 Scroll Wheel Problem. 1z


    Hello everyone!

  • RELEVANCY SCORE 2.92

    DB:2.92:M60 Middle Button Sticking fa


    So I just got my new M60 and I'm having a slight problem. At a certain point along the scroll wheel when I press down the button sticks. It works completely fine along the rest of the wheel though. Is this the kind of thing that needs breaking in or do I have a defective mouse? I was thinking of spraying some WD-40 in there but decided that was probably a bad idea haha. Any advice would be appreciated. Thanks!

    DB:2.92:M60 Middle Button Sticking fa

    Let us know if we can be of any further assistance.

  • RELEVANCY SCORE 2.88

    DB:2.88:Keyboard Response/Mouse Response 7f


    I just bought a K90 and a M60, and the problem is sometimes the M60 just stops moving after I fiddle with settings, but clicks/scrolls are still registered.

    DB:2.88:Keyboard Response/Mouse Response 7f

    Have you tried reflashing the firmware for both devices?

  • RELEVANCY SCORE 2.87

    DB:2.87:Nec Dvd+Rw Nd-5100a Will Not Recognize Dvd Or Even Cd-Rom's sx



    Hello,

    Can anybody give me a solution for this problem?

    System:
    Dell Precision M60, 1Gb RAM, 80Gb 5400 Hardrive, Windows XP Pro SP1, and of course the NEC DVD+RW.

    Main problem is that I usually can not readDVD or CD-ROM titles (or even burn them). Sometimes my M60 wants to supprise me and suddenly I can read DVD or CD-ROM titles. After two mouths of working on my M60 this drive didn't work well.

    Please give me some information on how to solve this problem or should I replace this drive?

    DB:2.87:Nec Dvd+Rw Nd-5100a Will Not Recognize Dvd Or Even Cd-Rom's sx


    It seems that I've joined the company of a very large group with the same NEC DVD+RW drive problem. I've been going nuts trying to figure out if it's a driver problem or a hardware problem. I have an Inspiron 5150 with the NEC drive installed, and have had progressively poor performance until yesterday when it finally conked out. It operates intermitently with CD's, but seems to have quit working with DVD altogether.

    I'm going to call DEll, but can you explain the procedure that you used? Whatever you did, you wound up with a replacement unit, and I believe that's what I need.

  • RELEVANCY SCORE 2.87

    DB:2.87: Satellite M60: Booting Windows From Usb Hdd 78


    Hi,

    I have problem with booting windows (i tried 2k, XP, 2k3, and vista beta2) from USB HDD. After normal system install seqence on by HDD USB i can boot via my new system, but after few seconds i see a bluescreen with error message. What should i do to boot system from USB HDD ?

    I have satellite M60, BIOS version 1.40

    DB:2.87: Satellite M60: Booting Windows From Usb Hdd 78

    Hi

    I have also read some topics that somebody said it's possible to boot from the USB-HDD.

    As far as I know it's not possible.

    You can only boot from this devices:

    Booting devices: USB-FDD/HDD/ODD/LAN

  • RELEVANCY SCORE 2.87

    DB:2.87:M60 Back Button Sticks, Weak Scroll Wheel. 79


    I purely just wondering if I have a defective mouse or if I'm experience normal conditions.

    DB:2.87:M60 Back Button Sticks, Weak Scroll Wheel. 79

    The back and forward button seem to be pretty consistence in pressing power required. Sometimes because the buttons have never been pressed it may take some time to work the buttons in.

  • RELEVANCY SCORE 2.86

    DB:2.86:Help Steering Wheel Problem mz



    Hi I just got a Super SPorts 3x steering wheel but it wont work on gt6. Is their a solution

    DB:2.86:Help Steering Wheel Problem mz


    Hi I just got a Super SPorts 3x steering wheel but it wont work on gt6. Is their a solution

  • RELEVANCY SCORE 2.86

    DB:2.86:M60/Quadro Fx Go 700/Intervideo Problem az


    hello. i'm having a problem playing dvds on my m60. i have played dvd's before...about 6 months ago with no problems. however, today i put in a dvd and intervideo windvd 4 came up and said..."create overlay failed. please lower your screen resolution or color depth and try again." i lowered both the resolution and color depth one at a time...both at the same time...nothing helps. anyone have a solution? thanx.

    DB:2.86:M60/Quadro Fx Go 700/Intervideo Problem az

    I thought I saw it working but when I tried again, it didn't work. I followed your instruction to bring up the NVIDIA Quadro FX Go700 setting but the Restore button under the Performance and Quality Settings is greyed out. I tried to change something to make the Restore became enabled and click on it to Restore to default settings. This doesn't work.

    To be specific, I'm using NVIDIA Quadro FX Go700 driver version 7.8.1.1 dated 7/6/2005. Is there any other information you need to trouble shoot this. BTW, is someone from DELL providing support for this?

    Thanks.

  • RELEVANCY SCORE 2.86

    DB:2.86:M60 Blue Tooth Question fp



    I have heard a lot of rumours about security problems with blue tooth.

    I have a nokia 6310i mobil handy and wanted to connect it to my M60, but because of this rumours I deactivated both, the handy and the M60 Blue Tooth.

    This seems to be a quite serious security problem, so whats up about it ?

    DB:2.86:M60 Blue Tooth Question fp

    Bluetooth has encryption just like wireless does. But the range on your bluetooth is probably only about 10 meters. If someone's that daring to hack into you while sitting right next to you, I would say you might want to purchase a bulletproof vest as well.

  • RELEVANCY SCORE 2.86

    DB:2.86:[Problem] M60 Bad After Firmware Update, Help!! p9


  • RELEVANCY SCORE 2.85

    DB:2.85:M60 Issue dk


    Hi Corsair,

  • RELEVANCY SCORE 2.84

    DB:2.84:Boot Linux From Usb On M-60 fj


    Hello,

    I have a precision M60 with BIOS A05 and a USB-harddrive (SAMSUNG MP0804H).
    There was no problem installing SuSE9.2-Linux on that USB-disk. Moreover i had no problem booting from the USB-disk on my desktop system.

    But my precision M60 simply says, that it couldn't find a bootable device (USB boot device is selected in the BIOS).

    SuSE9.2-Linux is principly working on the precision M60. Moreover the USB-harddrive is easily accessableunder WindowsXP.

    It is very important for me, that i can boot from the USB-disk (dual boot is no alternative). So please help me with your experience.

    Thank you very much,
    best regards,

    Roland

    DB:2.84:Boot Linux From Usb On M-60 fj


    I tried the same USB-disk with an (even older) IBM ThinkPad. It worked without complications. I've really problems with that precision M60 (and also with all of our DELL laptops).

    If the problemcannot be solved, DELL laptopsare no longer usable for me and my colleagues.

    Please help!

  • RELEVANCY SCORE 2.84

    DB:2.84: 'Wrong Machine' Message On Satellite M60 During Recovery Procedure z7


    Hi.

    I'd be very grateful if someone could offer me a solution or advice with reinstalling Windows from the Toshiba Product Recovery DVD. After getting the motherboard on my Toshiba M60 (code PSM60A-0C7OOD) replaced I get the Wrong machine message when I try to reinstall Windows.

    I've read through the threads about updating the DMI but after trying to run the boot CD I got error saying that "no matching platform id was found" and so am unable to get it to work. I'm not sure if this is because the Toshiba M60 is not supported by the dmi updates...

    I've noticed that in System Information the system model is listed as 0000000000000000000. Am I right in thinking that is the problem and if I was able to change that to the correct model number the Product Recovery DVD will work correctly.

    Many thanks, Mike.

    DB:2.84: 'Wrong Machine' Message On Satellite M60 During Recovery Procedure z7

    I agree with the 2 above posts... no public DMI update available for your M60.

    Contact Toshiba and ask them for the DMI update software for your model (maybe they can provide it to you even through e-mail).

    This should resolve your wrong machine code.

    regards,

    electrochain

  • RELEVANCY SCORE 2.84

    DB:2.84:M60 Scroll Wheel Not Working 1x


    Howdy,

    DB:2.84:M60 Scroll Wheel Not Working 1x

    Ok, I think I need a RMA on this mouse. The scroll wheel has not been working for quite a while again.

  • RELEVANCY SCORE 2.84

    DB:2.84:Changing/Upgrading Precision M60 Lcds k3


    I bought a Precission M60 Laptop last week.  I was expecting a better display and on investigation I found it had the lower resolution dispay 1680x1050 instead of the ultra 1600x1200 display.  I checked back where I got it and sure enough that's what was listed.  If I found a good deal on a new display would there any problem replacing the complete display assyembly and having the system detect it with the proper drivers?  Shouldn't it be virtually a remove and replace operation?  It has the A09 bios. 

  • RELEVANCY SCORE 2.84

    DB:2.84:I Have A 2003 Dell M60 I Tried To Install A Logitech Webcam On My System It Would Not Complete Because Their Claims To Be Out Dated Drivers In My Registery Why Are They Outdated sp


    Registryy Booster 2010 pops up and will fix this problem for 29.95 My computer has been working fine untill I wanted to use a webcam don't the webcam come with it own drivers?

    DB:2.84:I Have A 2003 Dell M60 I Tried To Install A Logitech Webcam On My System It Would Not Complete Because Their Claims To Be Out Dated Drivers In My Registery Why Are They Outdated sp

    Hi,
    ·What is the exact model number of the Logitech webcam?

    I would suggest you to install the drivers for the Logitech camera on the system from the manufacturer’s website check whether the issue is resolved. Check the link mentioned below.
    http://www.logitech.com/en-gb/support-downloads/downloads
    Note:uninstall the drivers and software that is already installed on the system and the install the drivers from the manufacturer’s website.

    Thank you and Regards.
    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit our Microsoft Answers Feedback Forum and let us know what you think.

  • RELEVANCY SCORE 2.84

    DB:2.84:M60 Help 31


    Hi

    DB:2.84:M60 Help 31

    Contact your seller and ask if they can replace the mouse for you. If not, Request an RMA to replace it.

  • RELEVANCY SCORE 2.84

    DB:2.84:M60/M65 Scroll/Wheel Problems zd


    Hello,

    DB:2.84:M60/M65 Scroll/Wheel Problems zd

    I'm starting to feel something similar.

  • RELEVANCY SCORE 2.84

    DB:2.84:Precision Notebook M60 Display Broken?? 8c


    Hi

    I have a problem with my Precision Notebook M60. Couple of days ago it froze on me and I had to shut it down manualy. Now everytime I try to start the notebook nothing appears on the screen. You can just hear two beeps but the screen staies black. What can I do? Maybe a total reset of the Bios?I already tried to start the notebook without the reserve battery but it didn't change anything.
    I hope you can help me.

    Lorenz

    DB:2.84:Precision Notebook M60 Display Broken?? 8c

    Hi

    I have a problem with my Precision Notebook M60. Couple of days ago it froze on me and I had to shut it down manualy. Now everytime I try to start the notebook nothing appears on the screen. You can just hear two beeps but the screen staies black. What can I do? Maybe a total reset of the Bios?I already tried to start the notebook without the reserve battery but it didn't change anything.
    I hope you can help me.

    Lorenz

  • RELEVANCY SCORE 2.84

    DB:2.84:Dvi Problem M60 Dual Monitor dp


    I have an M60 connected to 2 dell monitors through a D-Dock.
    The VGA monitor is just fine.

    The DVI monitor has corrupted pixels after I re-dock the machine.

    I have to reboot to get it back to normal.

    Anyone has a similar problem?

    Thanks.

    DB:2.84:Dvi Problem M60 Dual Monitor dp


    I have no clue but to ask you if you've updated your display driver/inf, video, bios/firmware ?

    http://support.dell.com/support/downloads/devices.aspx?c=uscs=19l=ens=dhsSystemID=WRK_NBK_PNT_P4_M60os=WW1osl=EN

    I do recall reading about problems with DVI Dell monitors; don't know if that would even apply to you. Here it is.

    http://forums.us.dell.com/supportforums/board/message?board.id=dim_monitormessage.id=33721view=by_date_ascendingpage=1

  • RELEVANCY SCORE 2.83

    DB:2.83:M60 Issues ak


    Hello there,

    DB:2.83:M60 Issues ak

    You can request an RMA to replace the mouse.

  • RELEVANCY SCORE 2.83

    DB:2.83:M60 Problem 31


    I have had the M60 for like 2 weeks now, and have been doing all kinds of playing/testing on it.

  • RELEVANCY SCORE 2.83

    DB:2.83:New Vengeance M60 Missing Weights pk


    Purchased the Vengeance M60 mouse the other day from Amazon. It came in today and somewhat enjoying and adjusting to it. There is one huge problem with it I cannot stand. That is how unbearably light it is. The Amazon description mention a weight system was included. However I'm not seeing them included. All that's there is the three unnoticeable weights already in the mouse.

  • RELEVANCY SCORE 2.83

    DB:2.83:M60 And Linux 9a


    Hi,

  • RELEVANCY SCORE 2.80

    DB:2.80:M60 Acceleration Problem aa


    Did you guys (M60 users) experienced any problem with it's acceleration. I experience this a lot while playing COD MW3. There are a lot of times the mice tends to move too far from my desired position. I played fps for a lot of years (approx 15 yrs), so I know the feeling if there is a problem with the mouse drag. Are there any fix?

    DB:2.80:M60 Acceleration Problem aa

    hi. You guys should also try this to see if it fixes the problem.

  • RELEVANCY SCORE 2.80

    DB:2.80:Precision M60 Bios Freezes With Ipod Plugged In 73


    Hello!

    I have a strange problem with my Precision M60 - the BIOS load freezes about 80% of the way through, if my iPod is plugged in via USB. It happens with all of my iPods (mini, nano and video). It's really odd and does my head in if I forget to unplug it when re-booting!

    I've got BIOS revision A09, which I believe is that latest.

    Any thoughts?!

    Cheers!

    mroshaw

    DB:2.80:Precision M60 Bios Freezes With Ipod Plugged In 73

    clear nvram and reset factory defualts in the cmos

    alt-f
    alt-e
    reboot

  • RELEVANCY SCORE 2.80

    DB:2.80: M60-176: Question About A Display Issue. 97


    I bought a m60-176 this week.

    I noticed a faint halo of light on all the lenght of the bottom part of the screen when I put a totally black picture. I was wondering if it was normal or if it was a defect on the screen.

    Anybody experienced such a problem on a Trubite screen ?

    DB:2.80: M60-176: Question About A Display Issue. 97

    Hi

    Well, I would recommend to ask the Toshiba service partner for the opinion. If there is a fault so it should be replaced. But only the ASP can give you a proper answer if it’s a really a hardware fault.

    Bye

  • RELEVANCY SCORE 2.80

    DB:2.80:Dual External Monitors For M60 pf


    Hello,

    I have M60/Windows-XP with nVidia Quadro FX Go700, and I'm trying to connect two external monitors to this M60 with D/Dock that has the VGA and DVI connectors.

    I've spent some time, but so far NO luck.

    What I tried were as follows:

    (Try-1) Connected one monitor to VGA connector and the 2nd monitor to DVI
    The 2nd sreen says "NO signal"! Why?

    (Try-2) Someone told me that I need a video splitter, so I've got one.
    I see the same picture on both monitors that are connected to the splitter.

    Can anyone help me to resolve this problem?
    What is a right way to have two external monitors for M60?

    Or, do I need any special graphics board???

    Your any clues are highly appreciated.

    DB:2.80:Dual External Monitors For M60 pf

    The Matrox G450 Dual is a video card that supports 2 monitors. I have a Dell 8300 and replaced the standard video card with G450Dual that supports 2 monitors in the AGP slot in the chassis. I'm trying to add a 3rd monitor and have decided to get another G450 Dual (PCI version). This should allow me to move various windows across any of the monitors to a bigger desk top.

  • RELEVANCY SCORE 2.80

    DB:2.80:M60 Bluetooth Problem 9c



    I just put a truemobile bluetooth module (P/N X1566) into my M60 , sytstem (dell oem xp sp2) found it ,but appear as unknown device , device id shows as usb\vid_0000pid_0000\511aa5f0b02 , this module and the cableworks well in Dell D610. Maybe
    this module isdamaged or my M60 does not support this X5166orthere are some differentbetween M60 and D610 cables. help plz
    Message Edited by fisheruncle on 01-15-2006 06:08 AM

    DB:2.80:M60 Bluetooth Problem 9c

    I have installed the X5166 sussessfully , just the cable problem, Dell have two kinds of these cables, nomal and cross , just thread sequence

  • RELEVANCY SCORE 2.80

    DB:2.80: Satellite M60-171 Sounds Like Echo-Well 7j


    Hello,

    My satellite M60-171 sounds like an echo-well. Reinstalling the drivers does not seem to fix the problem (problem hasn't always been there and no I have no idea since when this problem occurs...)

    The sound itself isn't bad at all; but the echo in every sound it makes is anoying....

    Suggestions ?

    Greetz,

    Peter

    DB:2.80: Satellite M60-171 Sounds Like Echo-Well 7j

    Hi

    Did you try to make system restore to earlier time? Maybe it will solve this in short time and you must not waste your time searching around und check all available options.

  • RELEVANCY SCORE 2.80

    DB:2.80:Fragen Zur M60 dc


    hallo,

    DB:2.80:Fragen Zur M60 dc

    Haben wir nicht direkt hier abgewogen das leergewicht, aber ohne Gewichte leichter als die G9 von Logitech mit Gewichte leicht schwerer.

  • RELEVANCY SCORE 2.80

    DB:2.80:M60 Usb 3.0 Issue cx


    Hi i just got this problem, while the mouse is correctly working while placed on the USB 3.0 (drivers updated at the latest), when i try to install the Software it says that there is not M60 connected, while if i put in the 2.0 it works.

    DB:2.80:M60 Usb 3.0 Issue cx

    We recommend using the keyboard or mouse on a USB 2.0 port. The 3.0 port has no advantages for HID devices and in some cases is not support by the driver on the board.

  • RELEVANCY SCORE 2.80

    DB:2.80:A Lot Of Blue Lines! --> Uninstall Go700'S Drivers (M60)?! ad



    Hi!

    I've a DELL Precision M60 with Go700 video card and I have a strange problem... in some area of the screen a lot of vertical "light blue" lines appears...

    I think this is a driver problem 'cause also in the app QuadroView there are some visualization's problems...

    How can I completely uninstall the previous drivers to re-install the DELL drivers?!

    Thank you :)

    DB:2.80:A Lot Of Blue Lines! --> Uninstall Go700'S Drivers (M60)?! ad


    Hi!

    I've a DELL Precision M60 with Go700 video card and I have a strange problem... in some area of the screen a lot of vertical "light blue" lines appears...

    I think this is a driver problem 'cause also in the app QuadroView there are some visualization's problems...

    How can I completely uninstall the previous drivers to re-install the DELL drivers?!

    Thank you :)

  • RELEVANCY SCORE 2.80

    DB:2.80:M60 Drivers ... Spent Hours - Cant Find These 3 Drivers 7s


    Got no reply in Precision forum so hoping someone can help from inspiron forum ...

    Recently did a clean reinstall of win XP PRO on my M60.
    And are missing the following drivers????

    for

    Base System Device
    Ethernet Controller
    Network Controller

    Can anyone tell me how I fix this problem -
    ie ... where to find, which ones need to install
    --- driving me nuts.

    Cheers,
    sleepy

    DB:2.80:M60 Drivers ... Spent Hours - Cant Find These 3 Drivers 7s

    The Base System Device is the TISmartCard reader..............TD

  • RELEVANCY SCORE 2.80

    DB:2.80:M60 Fx1000 Maya Problems sm


    I just got this M60 2Ghz with Quadro FX 1000.
    I am running Maya and I am having some problems with the
    Refresh rate of Maya's viewport. As well as some strange artifacts on the timeline.
    I reinstalled the driver and that didn't seem to help. There is also a problem with some of the menu's items not showing up. I adjusted the DPI setting as another user had suggested. That cleared up the Menu Problem but didn't help with the refresh rate or the Artifacts. If anyone can help Please do.
    This is driving me crazy!!

    Thanks in advance.

    DB:2.80:M60 Fx1000 Maya Problems sm

    Try the updated Maya specific driver (version A05_61.76) on the Quadro FXGo1000 driver download page.

  • RELEVANCY SCORE 2.79

    DB:2.79:M60 Dual Monitor Problem az



    I have M60 with NVIDIA Quadro FX Go1000, which works quite nice with the one monitor.

    If i use a second monitor or a beamer there are serious graphic problems on the second monitor.

    All Open Gl windows dont work at all and there is no chance to work with the second display. Its totally useless like this.

    I already upgraded to the newest nvidia drivers.

    DB:2.79:M60 Dual Monitor Problem az

    kweinreich - which "latest" nVidia drivers are you using? Modified nVidia drivers or the latest Dell released 53.81/53.82?

  • RELEVANCY SCORE 2.79

    DB:2.79:M60 - Dim Screen kj


    I've got an M60 that I'm more than pleased with. But, as a previous customer of two Inspirons, both with video board problems and blank boot-up screens, I'm concerned. The last couple of days my M60 has booted half the time with the dim screen. I keep thinking that this problem will get fixed in subsequent models. Will I have to live with this once per year, no matter which machine I buy? I stay loyal to the Dell's but I'm really wondering if that loyalty is misplaced. I don't get the impression that this happens with all of the laptops out there. I treat mine very well and protect it from hard use. Maybe I should knock it around more?? That might 'condition' these machines.

    DB:2.79:M60 - Dim Screen kj

    I've got an M60 that I'm more than pleased with. But, as a previous customer of two Inspirons, both with video board problems and blank boot-up screens, I'm concerned. The last couple of days my M60 has booted half the time with the dim screen. I keep thinking that this problem will get fixed in subsequent models. Will I have to live with this once per year, no matter which machine I buy? I stay loyal to the Dell's but I'm really wondering if that loyalty is misplaced. I don't get the impression that this happens with all of the laptops out there. I treat mine very well and protect it from hard use. Maybe I should knock it around more?? That might 'condition' these machines.

  • RELEVANCY SCORE 2.77

    DB:2.77:M60 Scroll Wheel Not Precise!? xs


    I recently purchased the M60 to compliment my K60.

    DB:2.77:M60 Scroll Wheel Not Precise!? xs

    I would advise we go ahead and do an RMA for your unit. Please use the link on the left side of the page.

  • RELEVANCY SCORE 2.77

    DB:2.77:M60 With Windows Server 2003 9s


    I have a problem with my M60 and Windows Server 2003.
    I don have the corret drivers for my video (and sound) card for
    Windows Server 2003. Who has a new driver for the FX Go700 ??

    Thanks

    DB:2.77:M60 With Windows Server 2003 9s

    All good with my Server 2003 install, including BlueTooth.

    I found I had to install the Chipset INF files, so that the graphics card is installed as an AGP card (before the chipset install, it was detected as a PCI card, even after installing the Dell/nVidia video drivers).

    By the way, my display properties lists the Direct X version as 3.0.

    Under dxdiag, Direct 3D AGP Texture Acceleration are disabled, even though I have Dx 9.0c installed.

    I've tried R82002 as well as R88801 (latest WHQL for my GPU).

    Any thoughts?

  • RELEVANCY SCORE 2.74

    DB:2.74:M60 No Video But I Hear Sounds 8m


    I have a Precision M60 about a month or 2 old. Upon boot up, there is a flash fo white light and then after a few seconds window can be heard starting up, but no video at all. I have repalced the video card and that did not fix the problem. I also have tried hooking up an external monitor to the vga and s-video slots with no video showing on either. Any suggestions?

    DB:2.74:M60 No Video But I Hear Sounds 8m

    Could be that the video chip has overheated and fried. In that case you wont get any video.

    With the external monitor hooked did you try switching from internal to external or both with the function keys?

  • RELEVANCY SCORE 2.73

    DB:2.73:Steering Wheel Problem k7


    I am having problems setting up my steering wheel - logitech driving force pro. Can anyone advise.
    Thanks

    DB:2.73:Steering Wheel Problem k7

    Well. For mine, i have to plug it all in except for the usb into the ps2, then when the ps2 is on with a game in (GT4 of coarse) i plug the usb cable into the ps2 and it works with no problems.

  • RELEVANCY SCORE 2.73

    DB:2.73:Re: Dell M60 Iv9? a9


    I'm having a problem running IV9 on my Dell M60 w/Nvidia Go1000 video card.
    The program opens correctly, but when I try to open an existing drawing IV9
    instantly disappears from the screen. I can see the part in the preview
    window prior to clicking the open button. I've tried unloading re-loading.
    Any ideas?
    Alan

    DB:2.73:Re: Dell M60 Iv9? a9

    Thanks for all the responses!
    I tried using the ms GDI generic OpenGL driver and it worked. I then
    reloaded the Nvidia driver on the machine, and that seemed to work; I'm now
    able to set the IV graphics setting to the "Use optimization setting
    recommended by IV", and it working fine.
    Alan

    "cbliss" wrote in message news:410f193b$1_2@newsprd01...
    I am running am M60 and have opened thousands of models and some drawings.
    What I have seen twice in the last couple days is a program named eFax.
    On both the of the machines with eFax installed, Inventor did exactly
    what you described. After unistalling eFax problem solved.

    Alan K wrote:

    I'm having a problem running IV9 on my Dell M60 w/Nvidia Go1000 video
    card.
    The program opens correctly, but when I try to open an existing drawing
    IV9
    instantly disappears from the screen. I can see the part in the preview
    window prior to clicking the open button. I've tried unloading
    re-loading.
    Any ideas?
    Alan



  • RELEVANCY SCORE 2.73

    DB:2.73:M60 Cable Management? dp


    Hi,

    DB:2.73:M60 Cable Management? dp

    It has a little strip of velcro that you can use has a tie wrap for extra cable, the cable is about 7 feet long. The velcro slides up and down the cable, it dosen't come off the cable.

  • RELEVANCY SCORE 2.73

    DB:2.73:M90 Scroll Wheel Problem dd


    Hello Corsair Support,

  • RELEVANCY SCORE 2.72

    DB:2.72: Satellite M60 - Wrong Machine Error When Booting From Product Recovery Cd kj


    I have a Satellite M60 notebook which I formatted in 2007. At that time, I used a Product Recovery CD that I purchased from Tosiba Australia.

    I now want to format my HDD again using the same CD, but this time when I boot from the CD, I get a "Wrong machine" error.

    I assume that the information on my HDD has been corrupted which causes the utility to fail.

    Can anyone provide me with any ideas on how to overcome this problem?

    DB:2.72: Satellite M60 - Wrong Machine Error When Booting From Product Recovery Cd kj

    ...motherboard that was replaced but when I got it back, the system would not boot.

  • RELEVANCY SCORE 2.72

    DB:2.72:M60 Not Working 8k


    Hello,

    DB:2.72:M60 Not Working 8k

    Sorry to hear you are having issues with your M60.

  • RELEVANCY SCORE 2.72

    DB:2.72: Keyboard Issue On M60 (Skipping Characters) fs


    I bought an M60 for my wife and she has complained that it is constantly skipping characters. I have found the same problem. E.g. typing URLs into internet explorer or composing emails, it will miss characters 10% of the time. I've seen a couple of posting about this in the forums.

    Good old Dixons are refusing to refund the purchases as someone called me today to say that she can't see any problem with the keyboard.

    Does anyone know a solution to this problem?

    DB:2.72: Keyboard Issue On M60 (Skipping Characters) fs

    Hi

    It’s not a fault or whatever. If you want to change it you only have to set the right settings in the ‘Regional and Language Options’. This can you find in the ‘Control Panel’.

    Please go to ‘Details’ in the ‘Languages’ tab. There you need to change the keyboard to English UK. I assume it’s set to US.

    Bye

  • RELEVANCY SCORE 2.72

    DB:2.72:Latitude D800 With M60_A09 Bios jc


    I replaced the motherboard of a D800 (under warranty) with a refurbished motherboard (from Dell). The new motherboard has the Precision M60 BIOS revision A09 installed, but now the laptop won't work with the docking station (D/Dock). Does the M60 BIOS not support the connection to a docking station, or is this a problem with the new motherboard? If I need the D800 BIOS how do I flash it (I get an error that the hardware doesn't match)?

    DB:2.72:Latitude D800 With M60_A09 Bios jc

    Welcome to the Forum,

    M60 and last year or so's production of D800's use the same MotherBoard.

    The difference is that if you have "PC2700 RAM" (my D800 shipped from Dell with it)
    it will only run at a slower "D800" speed of 266MHz on a D800 BIOS.

    The M60_A09 BIOS is identical to the latest D800_A13 except that it allows your RAM
    (only if it is PC2700) to operate at the faster "M60" speed of 333MHz. Dell had
    shipped Corporate 'fleets' of D800's with M60 BIOS.

    I force flashed my D800 to M60 to get the advantage of the faster RAM Speed and have
    no problems with my Dock. Running a D800 with PC2100 RAM on M60 BIOS will cause no
    problems, but that RAM will still only operate at its maximum of 266MHz.

    Your MotherBoard should have shipped with a CD to Flash the RAM, but I would advise
    against it due to the risk and no advantage running D800_A13 RAM, you should probably
    use the utility on that CD to enter your Service Tag on that MotherBoard.

    The DOS Command to Flash Your System to D800_A13 would be something like D800_A13 /forceit
    but again I strongly recommend not doing it, if your Dock is not working, a Flash to A_13
    will not fix that.

    The identical same "Dock Firmware" is used for D800/M60 and if you compare BIOS Release
    Notes, you will see that they are the same as well (different file numbers). Although
    the major difference in D800/M60 is the Video Cards, M60 BIOS recognizes D800's Video Cards,
    however you must use Video Drivers appropriate to your Video Card (and avoid "nVidia GeForce
    FX Go5650, v.6.14.10.7811, A05 with a Release Date: 08/16/2005" as it has problems).

    You can click the Link in my sig to read more about the D800 to M60 BIOS switch.

  • RELEVANCY SCORE 2.72

    DB:2.72:M60 Laptop Slowwww Clock 8f


    I have an M60 laptop that I bought used and it works fine in all respect except the clock will not keep time. Usually that is a cmos battery problem but where is the battery? Can someone tell me how to get to it or where I can find the directions I need to get to it? Thanks a bunch.

  • RELEVANCY SCORE 2.72

    DB:2.72:Power Supply Sends Audio Chatter Via Usb Port 9k


    I have an M60 that has a synthesizer attached to it via USB
    whenever i have the M60's power supply plugged in there is a chatter intorduced into the
    audio path of the synth.

    I played some shows in japan recently and had to use a non earthed power supply and the chatter was not present.
    so it seems that there is a problem with earthing here.

    is there a 240V (i'm in Australia) version of the M60 power supply that is not earthed or is there a way of
    stopping this chatter coming through the USB cable?

    thanks

    Luke.

    DB:2.72:Power Supply Sends Audio Chatter Via Usb Port 9k

    I have an M60 that has a synthesizer attached to it via USB
    whenever i have the M60's power supply plugged in there is a chatter intorduced into the
    audio path of the synth.

    I played some shows in japan recently and had to use a non earthed power supply and the chatter was not present.
    so it seems that there is a problem with earthing here.

    is there a 240V (i'm in Australia) version of the M60 power supply that is not earthed or is there a way of
    stopping this chatter coming through the USB cable?

    thanks

    Luke.

  • RELEVANCY SCORE 2.72

    DB:2.72: Satellite M60: Express Media Player Freezes Completely 8s


    Hi, newbie here. Had a look on the forum and there wasn't another one so here's hoping!

    When I boot my Satellite M60 into the media centre using the button above the keyboard, I insert a DVD to watch and after a minute or so it freezes completely and I have to turn the machine off by holding the power button down for 5 seconds or so.

    Has anyone heard of this problem, and if not where can I get more info from?

    Thanks in advance

    Rich

    DB:2.72: Satellite M60: Express Media Player Freezes Completely 8s

    Hello Richard

    I believe that you are the first one on this forum with this issue. It will be interesting to know which medias you use. Using original DVDs or music CDs it should not happen.

    If you use some self burned and copied medias everything is possible. Sorry but I didn’t find anything about that. If you want you can call service partner or even hotline and ask them if something like that is already known.

    I use Express media player on my Satellite M40 and till now it works perfect.

    Bye

  • RELEVANCY SCORE 2.72

    DB:2.72: M60-164: Keyboard Malfunction? dm


    I only got the M60-164 yesterday but the keyboard is incredibly unresponsive. When typing, it misses out letters, ones that I have definitely hit. Its been driving me up the wall having to type passwords in 3 or 4 times because it drops a different letter out each time. I have even been typing with one finger, hitting the keys quite hard yet it still drops out letters.

    Is it a physical problem with the hardware or is this maybe a driver problem? I really don't want to have to take it back already.

    Thanks in advance

    DB:2.72: M60-164: Keyboard Malfunction? dm

    Identical problem with a M60/170, purchased February 24. A reluctant retailer has now agreed to return the PC for a (hopefully) replacement keyboard.

    But it would be helpful if Toshiba placed some official response on this forum to the growing number of unhappy owners of the M60 series!

    Message was edited by: cooper

  • RELEVANCY SCORE 2.71

    DB:2.71:M60 Dual Display Not Recognized After Standby/Hibernate x1



    I'm using an M60 on a dock with a second (dual) display. After sleeping and undocking, the laptop reverts to the LCD panel only. After re-docking, the M60 does not recognize the fact that there is an external monitor attached. If I go to the display controlpanel, select the second monitor, and check "extend desktop", it accepts this, but when I click OK or Apply, nothing happens. Only rebooting in the dock seems to fix the problem. Details below. Ideas?

    BruceM

    Dell M60, 1920x1200 display, Quatro FX Go 700, driver version 6.14.10.4482, quatro bios version 4.31.20.52.c2.

    External Monitor Viewsonic Veiwpanel VPD180 (DVI cable)

    DB:2.71:M60 Dual Display Not Recognized After Standby/Hibernate x1


    I'm using an M60 on a dock with a second (dual) display. After sleeping and undocking, the laptop reverts to the LCD panel only. After re-docking, the M60 does not recognize the fact that there is an external monitor attached. If I go to the display controlpanel, select the second monitor, and check "extend desktop", it accepts this, but when I click OK or Apply, nothing happens. Only rebooting in the dock seems to fix the problem. Details below. Ideas?

    BruceM

    Dell M60, 1920x1200 display, Quatro FX Go 700, driver version 6.14.10.4482, quatro bios version 4.31.20.52.c2.

    External Monitor Viewsonic Veiwpanel VPD180 (DVI cable)

  • RELEVANCY SCORE 2.71

    DB:2.71:M60 & Addonics Adcbsa2 Serial-Ata Cardbus Adapter 3s


    I have recently purchased a Addonics Serial-ATA cardbus adapter. To my big disappointment this card doesn't work with my Dell Precision M60...

    When I attach the card with a SATA drive hooked up, my computer locks up. I have tried the card with a Dell Inspiron 8100 and Lattitude D600 andit works just fine.

    I'm running Windows XP SP1 Professional on the M60 and I'm running the original Dell XP image with updated drivers. What's up with the Texas Instruments PCI7510 cardbus controller in the M60? I suspect an IRQ problem. I have got the card working after extensive testing, but withextremelybad performance.

    regards,

    Espen

    DB:2.71:M60 & Addonics Adcbsa2 Serial-Ata Cardbus Adapter 3s

    Hi,

    Did you solve your problem?

    See my post:

    http://forums.us.dell.com/supportforums/board/message?board.id=insp_harddrivemessage.id=37650view=by_date_ascendingpage=1

    I am having SATA PCMCIA problems with my Inspiron 8500... :-(

    Ricardo

  • RELEVANCY SCORE 2.71

    DB:2.71: Pci Flash-Memory Driver For Satellite M60-167 z3


    I just re-installed Win XP Professional (some new one, because recovery version was only XP Home), and after that I have a problem with PCI FLASH-Memory driver, the hardware manager show me that i need such driver?! Drivers for SD Memory cards have allready installed, but the problem is still here. I need PCI Flash-Memory driver for Satellite M60-167 Model No:PSM60E-0C801GGR

    DB:2.71: Pci Flash-Memory Driver For Satellite M60-167 z3

    Caban,

    I found out that the easiest solution is downloading and installing the 6-in-1 driver (ENE) from the Satellite M60 (Bx), SM60BXENE.EXE is.

    It did cost me 6 times reinstalling XPpro to get the right one but it worked.

    Although knowing the above a re-searched the drivers for the M30X, and found it also there but hidden inside the cardbus driver.

    After extracting the cardbus driver (also ENE Tech Inc) a zipped file "Cardbus driver - Cardreader.zip" is available. Which has the same files and setup as the above mentioned sm60 file. So now I happily working on my laptop again (also M30X, up to the next time my power socket wears out ).

    Regards,

    Jan-Peter

    PS I had my power socket replaced twice in 1.5 year now. Sometimes I long back to my 210CS (rock solid) and 4300 ( a bit less solid).

  • RELEVANCY SCORE 2.71

    DB:2.71: Satellite M60-164: High Pitched Whine 7f


    I've recently purchased a TOSHIBA SATELLITE M60-164, and have noticed a subtle yet incredibly annoying high pitched whine after startup. It is only noticeable in very quite environments.

    Any suggestions as too what this could be, I am very tempted to return this otherwise fantastic laptop if the problem persists.

    DB:2.71: Satellite M60-164: High Pitched Whine 7f

    Hello Denis

    You bought a new product and in my opinion you should contact service partner and ask for the opinion. We can discuss about that but in my opinion you should check it. He unit is new one, the warranty is valid and you should use this.

    By the way: M60 is very nice unit. I like it very much but unfortunately can not have it at the moment.

    Good luck with your new toy!

  • RELEVANCY SCORE 2.70

    DB:2.70:M60 Scroll Problem. a3


    Hey, my M60 scroll started to address some issues with the scroll. At one point on the scroll it goes really slow and in that moment you can't press the scroll down because it seems like it does that at the same time.

    DB:2.70:M60 Scroll Problem. a3

    Please use the link to the left to request an RMA.

  • RELEVANCY SCORE 2.70

    DB:2.70:Keyboard Bounce On Precision M60 ck



    I'm having a problem with a brand new Precision M60; with repeated keys appearing for a single momentary keypress, normally when I'm typing quite quickly. The repeated keys sometime appeat together ("ss") or sometimes after the next keypress ("sds").

    Dell have replaced both the keyboard and motherboard and the problem persists, although at a lower level since the motherboard replacement. They keyboard itself appeaars solid and doesn't noticably rattle.

    Any suggestions or hints would be appreciated.

    Message Edited by chris-uk on 02-12-2004 03:51 PM

    DB:2.70:Keyboard Bounce On Precision M60 ck


    I'm having a problem with a brand new Precision M60; with repeated keys appearing for a single momentary keypress, normally when I'm typing quite quickly. The repeated keys sometime appeat together ("ss") or sometimes after the next keypress ("sds").

    Dell have replaced both the keyboard and motherboard and the problem persists, although at a lower level since the motherboard replacement. They keyboard itself appeaars solid and doesn't noticably rattle.

    Any suggestions or hints would be appreciated.

    Message Edited by chris-uk on 02-12-2004 03:51 PM

  • RELEVANCY SCORE 2.70

    DB:2.70:Synaptics Not Working On Sony Vaio aj



    And another problem to solve...

    My system doesnt detect my touchpad. Well, it works, but I cant use Synaptics driver, because its detected as generic mouse. Ive installed xf-86-input-synaptics and xf86-input-evdev.

    Heres what my Xorg log says:
    [ 15396.302] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event8)
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass evdev pointer catchall
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Device: /dev/input/event8
    [ 15396.328] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 15396.329] (II) XINPUT: Adding extended input device ImPS/2 Generic Wheel Mouse (type: MOUSE)
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 15396.329] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)

    DB:2.70:Synaptics Not Working On Sony Vaio aj


    And another problem to solve...

    My system doesnt detect my touchpad. Well, it works, but I cant use Synaptics driver, because its detected as generic mouse. Ive installed xf-86-input-synaptics and xf86-input-evdev.

    Heres what my Xorg log says:
    [ 15396.302] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event8)
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass evdev pointer catchall
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: always reports core events
    [ 15396.302] (**) ImPS/2 Generic Wheel Mouse: Device: /dev/input/event8
    [ 15396.328] (--) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found relative axes
    [ 15396.329] (--) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 15396.329] (II) XINPUT: Adding extended input device ImPS/2 Generic Wheel Mouse (type: MOUSE)
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
    [ 15396.329] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
    [ 15396.329] (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    [ 15396.329] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)

  • RELEVANCY SCORE 2.70

    DB:2.70:M60 Accel z7


    Hi,

    DB:2.70:M60 Accel z7

    I don't think there is an option to disable mouse acceleration.

  • RELEVANCY SCORE 2.70

    DB:2.70:Yahoo Messenger 8 On Vista Disconnections zf


    Same problem here. I m on vista with a new xps 1710 to replace my dell m60. Yahoo messenger on xp on the m60 works perfectly. On the xps it keeps disconnecint and reconnecting itself, very regularly making it unusuable. Anybody could sort that problem?

  • RELEVANCY SCORE 2.70

    DB:2.70:M60 Weight Screw Problem 39


    Hello, I recently decided to try removing a weight from my M60 and when I tried to, the cog in the mouse that the screw goes into came off of the mouse. As far as I can tell it's not supposed to do that. I can no longer put the weight back in the mouse because of this problem.

    DB:2.70:M60 Weight Screw Problem 39

    Yeah wrong person. Sorry for the mix up. Thanks for posting pictures though.

  • RELEVANCY SCORE 2.70

    DB:2.70:M60: Go700'S Driver Doesn't Work!!!! mz



    Hello!

    I've a new M60 but the driver of the video card doesn't work properly... :(

    In some area of the screen there are some vertical blue lines... and rotating an object in the QuadroView application shows a big problem in the 3D visualization...

    I've tried to install all the three version (A00, A01, A02) of the DELL driver... I'vealso re-installed Windows XP and all the drivers, but the problem still remains..

    How can I solve this problem?!

    Help you, please!! ;) ;)

    ThanXThanX

    DB:2.70:M60: Go700'S Driver Doesn't Work!!!! mz

    Sorry to hear that...the same procedure works great on all the M60s I install on...the only thing different I do is always use the latest chipset inf from the Intel site, and use the A11 audio driver from the Inspiron 8600 download page...keep me posted.

  • RELEVANCY SCORE 2.70

    DB:2.70:M60 Bluetooth Problem cm



    The Bluetooth module on my M60 disappears after about a week. If I reflash the BIOS it is redetected and runs fine, then after about a week it disappears again. The diagnostics claim the hardware isn't installed and it doesn't appear in the Device Manager tab. Nothing seems to 'wake it up' except a BIOS flash.

    Is this a faulty module?

    Thanks

    DB:2.70:M60 Bluetooth Problem cm


    The Bluetooth module on my M60 disappears after about a week. If I reflash the BIOS it is redetected and runs fine, then after about a week it disappears again. The diagnostics claim the hardware isn't installed and it doesn't appear in the Device Manager tab. Nothing seems to 'wake it up' except a BIOS flash.

    Is this a faulty module?

    Thanks

  • RELEVANCY SCORE 2.70

    DB:2.70:M60 Brand New. Middle Mouse Not Working x7


    I just, JUST got home from buying the m60 mouse and I have installed the firmware and the software. The middle scroll wheel mouse button is not working properly.

    DB:2.70:M60 Brand New. Middle Mouse Not Working x7

    Yup, returned it. They tested it and felt the same fault as I did. Unfortunately for Corsair perhaps, I chose to buy another mouse instead. The m60 didn't feel right in other ways as well.

  • RELEVANCY SCORE 2.70

    DB:2.70:Nvidia Quardo Fx Go700 Replacement For M60 9d


    I have used my M60 for 3 years running Autodesk Inventor CAD software. I have upgraded to the newest version of Autodesk Design Review software and the performance is very poor. I was told by Autodesk that the problem is most likely the video card. Is there a replacement board for the Quadro FX Go700?

    DB:2.70:Nvidia Quardo Fx Go700 Replacement For M60 9d

    I have used my M60 for 3 years running Autodesk Inventor CAD software. I have upgraded to the newest version of Autodesk Design Review software and the performance is very poor. I was told by Autodesk that the problem is most likely the video card. Is there a replacement board for the Quadro FX Go700?

  • RELEVANCY SCORE 2.70

    DB:2.70: Satellite M60: Low Sound On Headphone (Perfect Sound On Speakers) j8


    Hi, A few weeks ago i got my new Satellite M60.

    Sound on laptop-speakers is great (Harman/Kardon) but is it possible there is a problem with the mini-jack for the headphone?

    Sound via headphone is very week and i can't find how to improve it.

    I often used my previous laptop to see movies on my TV (S-video + mini-jack for sound to AV-receiver). Sound was great... but now, when i connect my AV-receiver (or headphone) sound is very low...

    Who could help me?

    I tried different headphones (who work fine on other laptops)
    I know about the sound-level wheel in front of the laptop
    I tried the volume control tool in control panel

    DB:2.70: Satellite M60: Low Sound On Headphone (Perfect Sound On Speakers) j8

    Hi

    In my opinion you should check all settings in volume control. Set the wave on to max. If the headphone have own volume control, check it too and set to max.

    Bye

  • RELEVANCY SCORE 2.70

    DB:2.70:M60 Software/Dpi/Sniper Button Issues 8z


    My - M60 Story...

    DB:2.70:M60 Software/Dpi/Sniper Button Issues 8z

    I'm glad it is now working. You may also want to try to flash the firmware again.