• RELEVANCY SCORE 5.29

    DB:5.29:Request Processing Failed. (Xls 000009) dd




    Hi, Am getting this error while view the dashboard from BI Launchpad. But before it was working fine. I found few notes also. And in few note, they mentioned as bug. Please suggest.1905673 - "Request processing failed. (XLS 000009 )" while adding a BICS connection in Dashboard Query Browser2032687 - Intermittent XLS 000009 request processing failed error happen for dashboard while view the dashboard from BI Launch Pad1834893 - Request processing failed. (XLS 000009) in BI Launchpad1769364 - Request processing failed. (XLS 000009)1880843 - Happen "Request processing failed (XLS 000009)" error intermittently while opening dashboard in BI LaunchpadPlease find below the system details and error screen shot.System Details:BOBI 4.1 SP4CMS DB: Oracle Connection : BICSBW Version : 7.01Please suggest your valuable inputs.Thanking you in anticipationRegards,Obinna.

    DB:5.29:Request Processing Failed. (Xls 000009) dd

    Have you checked all queries are refreshing with new prompt values ??? can you please check once logging in with both D and P system and refresh all queries with new prompt values. Because of query non availability of system we will get this error.

  • RELEVANCY SCORE 5.26

    DB:5.26:While Refreshing A Report Get- Request Processing Failed. (Xls 000009) ps





    Hi All,

    Getting error :" Request processing failed. (XLS 000009)

    Request processing failed. (XLS 000009) [] lt;com.businessobjects.semanticlayer.qt.QTException: Cannot execute empty query. (QTJ 00521)gt"

    While refreshing Dashboard reports on BI Launch pad.

    Steps for troubleshooting done so far:

    Restarting Dashboard, Connection servers and Data federation server. However the issue remains the same

    Environmental Details:

    BI 4.0 SP 04 patch5

    Client tools : 4.0 SP04 patch 5

    Windows server 2008

    BW 7.3

    DB:5.26:While Refreshing A Report Get- Request Processing Failed. (Xls 000009) ps


    Update over this issue:

    Go to dashboard designer open the non working report and when you edit query for existing one we get error " Some result objects or sort objects that you selected have changed(been renamed, removed or hidden) in the universe. In the result query the objects are missing.

    Kindly find the attached screen shot

    There are three reports based on three bex queries and observed for two non working reports One report is working without any errors.

    I observed that at the query level in BW side there were no recent changes done.

    Could any one help me understand the cause of what could had have happened.

    Thanks,

    Sairaja

  • RELEVANCY SCORE 5.03

    DB:5.03:"Request Processing Failed. (Xls 000009)" Error Message In Bi4.0 Dashboard m9





    Hi,

    I have a BICS Connection on a multiprovider .A dashboard was built using BEX and Dashboard queries.

    Today we added couple of infoobjects in the underlying infocube, adjusted multiprovider, BEX queries and Dashboard queries.

    When I execute the dashboard I get "Request processing failed. (XLS 000009)" error. I get this error equal to the number of dashboard queries I have in the dashboard. When I goto the query browser and run the query, it is fine and there are no errors. But, when preview or execute the dashboard, I get the error message.

    We tried running the Cache server on CMC, but there is no success.

    This dashboard was working fine until yesterday.

    Any thoughts..??

    Currently we are on BI 4.0 SP4

    regards,

    S R

    DB:5.03:"Request Processing Failed. (Xls 000009)" Error Message In Bi4.0 Dashboard m9


    Lee,

    I still get this error message. Though the message comes up, the dashboard gets refreshed and brings right data. Is there an option to suppress this error message by using flash variables or any other mechanism?

    did anyone use suppress message option for any kind of error messages?

    regards,

    S R

  • RELEVANCY SCORE 4.81

    DB:4.81:Data Is Not Coming In Dashboard... d7


    Hi Experts,I have one dashboard in which I have used Qaaws Query Browser connections.Qaaws is working fine but Query browser connection is not working, I found one error is coming in IE Request processing failed (xls 000009)and if same dashboard is opened in chrome then is showing To access external data, add a cross-domain policy file to the external data web server.Kindly help.Best Regards,Pushkar Dhale

    DB:4.81:Data Is Not Coming In Dashboard... d7

    Hi Pushkar,Can you provide the complete error text for the first error message.The second error that you get in chrome browser is related with cross domain policy error. For this you need to place crossdomain.xml file in the root directory of your web app server. Please refer the following KBase article:https://sevice.sap.com/sap/support/notes/1201632Also provide the complete error text for the second error so that we can try to narrow down the issue.Regards,Niraj

  • RELEVANCY SCORE 4.78

    DB:4.78:Error In Adapter Engine cp



    Hi Friends,

    Its a support issue.There is a MDM(file) to ORACLE(jdbc) scenario where i find error in adapter engine(audit log).

    Error--

    unable to execute statement for table or stored procedure 'VALUE_MAPPING'(structure 'statement')due to java.sql.SQL Exception

    JDBC message processing failed;reason Error processing request in sax parser: Error when executing statement for table/stored proc. "value_mapping"(structure 'statement').

    MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException:Error processing request in sax parser

    -

    Plz help me how to troubeshoot the issue.

    thanks,

    Suresh

    DB:4.78:Error In Adapter Engine cp


    hi,

    there is some problem in your query.you might not have mapped the correct query to your target side or if you have included query in your jdbc adapter that might be probelamatic.

    you can check that

    regards,

    ujjwal kumar

  • RELEVANCY SCORE 4.67

    DB:4.67:Function Module To Upload .Xls And .Xlsx Without Warning Message pz



    Hi Experts,

    Request you to kindly suggest a Function module/method to upload .XLS and .XLSX files into SAP without a warning message

    Thanks,

    IJOE

    DB:4.67:Function Module To Upload .Xls And .Xlsx Without Warning Message pz


    You can verify using SE37 in SAP as XLS or EXCEL.

    Thanks

    Seshu

  • RELEVANCY SCORE 4.64

    DB:4.64:Opp Error In Xml Reports 88


    Hi all,
    If we run XML reports its running fine.But, sometimes following errors occured.

    *****Beginning post-processing of request 2139021 on node ORMDV114 at 23-MAR-2008 15:14:11.
    Post-processing of request 2139021 failed at 23-MAR-2008 15:14:11 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.******

    Please provide solution for this issue.
    We got this error frequently.But, we are not able to solve this error.

    Thanks

    DB:4.64:Opp Error In Xml Reports 88

    Hi all,
    If we run XML reports its running fine.But, sometimes following errors occured.

    *****Beginning post-processing of request 2139021 on node ORMDV114 at 23-MAR-2008 15:14:11.
    Post-processing of request 2139021 failed at 23-MAR-2008 15:14:11 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.******

    Please provide solution for this issue.
    We got this error frequently.But, we are not able to solve this error.

    Thanks

  • RELEVANCY SCORE 4.26

    DB:4.26:Xml Print Request Had Failed- Where Is The Location Of The Opp Service Log? 83


    In a failing XML print job concurrent request, got this:

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 6889630 on node ORAT(SERVERNAME) at 26-MAY-2011 14:47:
    57.
    Post-processing of request 6889630 failed at 26-MAY-2011 14:47:57 with the error mes
    sage:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    I've checked all of these MOS notes -- none of them tell me the location of the actual "OPP service log"

    NOTE:291792.1 - Using the Output Post Processor (OPP) in Oracle Applications Concurrent Processing

    Output Post Processor (OPP) Request Log Contains Warning "The concurrent manager has timed out waiting for the Output Post-processor to finish this request." [ID 1226233.1]

    Xoncurrent Processing - Concurrent Requests Fail Due to Output Post Processing (OPP) timeouts [ID 352518.1]

    DB:4.26:Xml Print Request Had Failed- Where Is The Location Of The Opp Service Log? 83

    Thanks- with your help I quickly found the location of the log. Now I need to solve the issue but I will use SEARCH first. THanks MH

  • RELEVANCY SCORE 4.25

    DB:4.25:Request In Ods xj



    Hi,

    I had a request dated 5thjan got failed. but the data has no errors in psa.

    the loads after 5th went smoothly.

    i want to reload the request from psa with update immediately option. it is giving me the message as request was changed to red no processing done, do you want to process the request ? like that i am getting. if i click ok, do i get the request updated as todays date or 5th only. if it went fine, its ok no problem,i want to delete the request if it got failed now .

    Please help me...

    DB:4.25:Request In Ods xj


    hi,

    have you delete the request first from ods ?

    then try update again from psa.

    check what's the error in ods update

    - monitor - details

    - transaction st22 any error message, and sm21 ?

  • RELEVANCY SCORE 4.15

    DB:4.15:Re: How To Do Subtemplates 3j


    I have the following code in word:_

    sub template:_

    ?template:template1?

    Hi, sub templete

    ?end template1?

    main template:_

    ?import:xdo://PAYROLL.XXFRGPAY_NAT.en.ZA?
    ?call-template:template1?

    use this when previewing from word: ?import:file:///C:\TEMP\subtemplates\subtemplate_file.rtf?

    im getting this error in EBS:_

    Executing request completion options...

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 5801167 on node EBDEVAPP01 at 10-JUL-2009 09:26:37.
    Post-processing of request 5801167 failed at 10-JUL-2009 09:26:37 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    ------------- 2) PRINT -------------
    Not printing the output of this request because post-processing failed.
    --------------------------------------

    DB:4.15:Re: How To Do Subtemplates 3j

    This is the error log from OPP service log:

    [9/7/09 8:56:21 AM] [OPPServiceThread0] Post-processing request 525025.
    [9/7/09 8:56:21 AM] [20897:RT525025] Executing post-processing actions for request 525025.
    [9/7/09 8:56:21 AM] [20897:RT525025] Starting XML Publisher post-processing action.
    [9/7/09 8:56:21 AM] [20897:RT525025]
    Template code: XXFRGPAYTRR
    Template app: XXFRGPAY
    Language: en
    Territory: ZA
    Output type: RTF
    [9/7/09 8:56:22 AM] [UNEXPECTED] [20897:RT525025] java.lang.reflect.InvocationTargetException
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(XSLT10gR1.java:558)
    at oracle.apps.xdo.common.xml.XSLT10gR1.transform(XSLT10gR1.java:228)
    at oracle.apps.xdo.common.xml.XSLTWrapper.transform(XSLTWrapper.java:177)
    at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:1044)
    at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:997)
    at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(FOUtility.java:212)
    at oracle.apps.xdo.template.FOProcessor.createFO(FOProcessor.java:1665)
    at oracle.apps.xdo.template.FOProcessor.generate(FOProcessor.java:975)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5936)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:285)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:173)
    Caused by: java.io.IOException: Root problem: oracle.apps.xdo.XDOException:No corresponding LOB data found :SELECT L.FILE_DATA FILE_DATA,DBMS_LOB.GETLENGTH(L.FILE_DATA) FILE_LENGTH, L.LANGUAGE LANGUAGE, L.TERRITORY TERRITORY, B.DEFAULT_LANGUAGE DEFAULT_LANGUAGE, B.DEFAULT_TERRITORY DEFAULT_TERRITORY,B.TEMPLATE_TYPE_CODE TEMPLATE_TYPE_CODE, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.START_DATE START_DATE, B.END_DATE END_DATE, B.TEMPLATE_STATUS TEMPLATE_STATUS, B.USE_ALIAS_TABLE USE_ALIAS_TABLE, B.DS_APP_SHORT_NAME DS_APP_SHORT_NAME, B.DATA_SOURCE_CODE DATA_SOURCE_CODE, L.LOB_TYPE LOB_TYPE FROM XDO_LOBS L, XDO_TEMPLATES_B B WHERE L.APPLICATION_SHORT_NAME= :1 AND L.LOB_CODE = :2 AND L.APPLICATION_SHORT_NAME = B.APPLICATION_SHORT_NAME AND L.LOB_CODE = B.TEMPLATE_CODE AND (L.LOB_TYPE = 'TEMPLATE' OR L.LOB_TYPE = 'MLS_TEMPLATE') AND ( (L.LANGUAGE = :3 AND L.TERRITORY = :4) OR (L.LANGUAGE = :5 AND L.TERRITORY = :6) OR (L.LANGUAGE = :7 AND L.TERRITORY = :8) OR (L.LANGUAGE= B.DEFAULT_LANGUAGE AND L.TERRITORY= B.DEFAULT_TERRITORY ))
    at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
    at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
    ... 17 more

    [9/7/09 8:56:22 AM] [20897:RT525025] Completed post-processing actions for request 525025.
    [GC 9630K-6180K(13900K), 0.0032940 secs]

  • RELEVANCY SCORE 4.06

    DB:4.06:Processing Of Multipart/Form-Data Request Failed. Connection Reset jp


    Hi All,
    I am uploading file asynchronously. Some times it throws an exception
    Processing of multipart/form-data request failed. Connection reset
    So whats problem with it.

    DB:4.06:Processing Of Multipart/Form-Data Request Failed. Connection Reset jp

    The client aborted the connection. Several possible causes can be: browser closed, browser timed out, request stopped, PC locked, PC crashed, network line broken, etcetera.

  • RELEVANCY SCORE 4.00

    DB:4.00:File Upload Problem In Websphere jj


    Hi
    I am getting this error frequently but not always while uploading a file.Pleas let me know if u have faced similar problem and got any solution???

    org.apache.struts.upload.CommonsMultipartRequestHandler Failed to parse multipart request

    org.apache.struts.upload.CommonsMultipartRequestHandler TRAS0014I: The following exception was logged

    org.apache.commons.fileupload.FileUploadException: Processing of multipart/form-data request failed. Read timed out

    Thanks
    Saurabh

    DB:4.00:File Upload Problem In Websphere jj

    saurabh, have you resolved this already? im encountering the same problem. hope you could also give me assistance, thanks.

  • RELEVANCY SCORE 3.89

    DB:3.89:Dashboard Query 79



    HI

    question

    On dashboard when I add query it is not executing

    I am getting error XLS 000009

    Also how do I pull webi reports I created ?

    THanks

    nidhi

    DB:3.89:Dashboard Query 79


    HI Nidhi,

    Please share the compete error message from webi while publishing.are you able to access http://server_name:8080/dewsbobje from browser?

    Thanks,Sapanesh

  • RELEVANCY SCORE 3.86

    DB:3.86:Process 000009 Returned With Errors. ja



    Hi All,

    ODS activation failed due to cause of the below error u201Cprocess 000009 returned with errors.due to this one load is failing .why this error is coming frequntely.how can i solve this issue.please help me.

    Thanks,

    chandu

    DB:3.86:Process 000009 Returned With Errors. ja


    Hi,

    Go the RSRV

    perform the test for ods

    if u find the error then correct that error by the btoon on top.

    Regards,

    Sumit

  • RELEVANCY SCORE 3.86

    DB:3.86:Web Dynpro Component Activation Failed z3



    I tried to activate a web dynpro component and the activation failed. Have listed error messages from the request log and activation log. Do let me know what could be the issue. The application deployed successfully on my local J2EE.

    *********************************************************

    Request log details are as follows:

    ===== Processing =====

    BUILD DCs

    "hubbell.com/appl/ptl.wd.regtool" in variant "default"

    .. FAILURE: The build failed due to compilation errors. See build log for details. [result code: 202]

    ===== Processing ===== finished at 2005-11-29 00:09:48.813 GMT and took 18 s 899 ms

    ===== Post-Processing =====

    Check whether build was successful for all required variants...

    "hubbell.com/appl/ptl.wd.regtool" in variant "default" FAILED

    ===== Post-Processing ===== finished at 2005-11-29 00:09:48.823 GMT and took 3 ms

    Change request state from PROCESSING to FAILED

    ERROR! The following problem(s) occurred during request processing:

    ERROR! The following error occurred during request processing:Activation FAILED due to build problems. See build logs for details.

    *********************************************************

    Activation log details are as follows:

    wdgen] [Info] Initialize generation templates from configuration jar:file:/usr/sap/EDP/JC00/j2ee/cluster/server0/temp/CBS/79/.B/3223/DCs/sap.com/tc/bi/wd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml

    [wdgen] [Error] com.hubbell.ptl.rgstr.app.Registration --

    Application Registration: Component is missing

    [wdgen] [Error] com.hubbell.ptl.rgstr.app.Registration --

    Application Registration: Startup plug is missing

    [wdgen] [Error] Generation failed due to errors (0 seconds)

    Build with ERRORS

    file:/usr/sap/EDP/JC00/j2ee/cluster/server0/temp/CBS/79/.B/3223/DCs/hubbell.com/appl/ptl.wd.regtool/_comp/gen/default/logs/build.xml:49: [Error] Generation failed!

    DB:3.86:Web Dynpro Component Activation Failed z3


    There's obviously something missing in your WD DC: "Startup plug is missing". Your code has been checked-in to the inactive workspace. What you can do now is synchronize your DC with the server. You should get the same error then in your local NWDS and solve it.

  • RELEVANCY SCORE 3.86

    DB:3.86:Login Problem s8


    I cannot login ... user kenliao. Please, correct it.

    Failed web site: https://profile.oracle.com/jsp/reg/update_failed.jsp?language=en

    Failed message:
    We're sorry. There was a problem in processing your request.

    Thanks.

    DB:3.86:Login Problem s8

    Thanks. the problem still exist.

  • RELEVANCY SCORE 3.84

    DB:3.84:Ods Activation Failed Due To Cause Of The Below Error U201cprocess 000009 Retur ds


    Hi All, ODS activation failed due to cause of the below error u201Cprocess 000009 returned with errorsu201D.WHY THIS ERROR IS COMING.Thanks,chandras

    DB:3.84:Ods Activation Failed Due To Cause Of The Below Error U201cprocess 000009 Retur ds

    Kindly paste job log then we guys will be in best position to help you out Cheers!!Amit

  • RELEVANCY SCORE 3.56

    DB:3.56:Error: Invalid Content Type For Soap: Text/Html; Http 400 Bad Request 7s



    Hi Gurus,

    i am hardly fighting with this error in Communication Channel Monitoring:

    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request

    SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request

    DB:3.56:Error: Invalid Content Type For Soap: Text/Html; Http 400 Bad Request 7s


    have you tried to send your request to the http gateway (e.g. installed on your local machine) and see exactly what are you sending ?

  • RELEVANCY SCORE 3.36

    DB:3.36:Dc Activation Failing z1



    Hi

    When ever I activate a new DC its failing, The error log is here

    BUILD DCs

    ''company.co.uk/dev/java_test_dc'' in variant ''default''

    Starting CBS build controller process with JDK 'C:\usr\sap\CE2\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6'

    Build failed! Unknown error

    Change request state from PROCESSING to FAILED

    Error! The following problem(s) occurred during request processing:

    Error! The following error occurred during request processing: build controller process has terminated. cannot proceed with build

    Can some one tell me how to resolve this?

    Thanks

    Vidyadhar

    DB:3.36:Dc Activation Failing z1


    Hi,

    please review the note:

    #1438770 -- All DC builds fail with an IllegalStateException

    Best Regards,

    Ervin

  • RELEVANCY SCORE 3.03

    DB:3.03:Publisher Row Output Limit 87


    Hi all,

    I have a query that produces 61,000 rows and I need the output in Excel format. This job fails in Publisher. If I copy the query to SQL Developer, the query returns 61,000 rows, I can export it to XLS, and then open the XLS no problem (It's Excel 2007). The Publisher scheduler error message is below. Is there a limit to how many rows Publisher can handle? I can't find the answer in this forum anywhere, although some people have asked. Any ideas?

    Job Execution Information

    History ID 55
    Status Failed
    Start Processing Time 3/18/09 9:25 AM
    End Processing Time 3/18/09 9:37 AM
    Time Elapsed 691.22 sec

    Document Processing

    Status Failed
    System Message oracle.apps.xdo.servlet.scheduler.ProcessingException: oracle.apps.xdo.XDOException
    at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:945)
    at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:404)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)
    Caused by: oracle.apps.xdo.XDOException
    at oracle.apps.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
    at oracle.apps.xdo.servlet.data.DataException.fillInStackTrace(DataException.java:127)
    at java.lang.Throwable.init(Throwable.java:181)
    at java.lang.Exception.init(Exception.java:29)
    at oracle.apps.xdo.servlet.ReportException.init(ReportException.java:40)
    at oracle.apps.xdo.servlet.data.DataException.init(DataException.java:44)
    at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:96)
    at oracle.apps.xdo.servlet.CoreProcessor.processScheduledRequest(CoreProcessor.java:566)
    at oracle.apps.xdo.servlet.CoreProcessor.processScheduledRequest(CoreProcessor.java:404)
    at oracle.apps.xdo.servlet.CoreProcessor.generateScheduledDocument(CoreProcessor.java:114)
    at oracle.apps.xdo.servlet.ReportImpl.renderScheduledJob(ReportImpl.java:358)
    at oracle.apps.xdo.servlet.scheduler.XDOJob.generateReport(XDOJob.java:939)
    ... 3 more

    DB:3.03:Publisher Row Output Limit 87

    Steve,

    Is there a limitation on BIP for larger outputs.

    Thanks,
    Vara

  • RELEVANCY SCORE 3.01

    DB:3.01:Download(Xls) File Fm Abap Using Background Job 8j



    Hi,

    My request is how to download(xls) file fm ABAP using background job. ( Daily 3 times download )

    Pls advise...

    DB:3.01:Download(Xls) File Fm Abap Using Background Job 8j


    Hello Rajesh,

    Actually it is not the function module WRITE_DATASET but command OPEN DATASET. Check this link for more info:

    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/content.htm

    Also for this please contact your ABAP collegues. It is their job and they should have the expertise.

    Regards.

    Ruchit.

  • RELEVANCY SCORE 2.88

    DB:2.88:Beginning Post-Processing m3


    Hello Good People,

    I am new to this Forum, and new to using Oracle XML - to develop Oracle Reports for my employee. I would be grateful if you can assist me find a permanent solution to the problem below:

    ------------- 1) PUBLISH -------------*
    Beginning post-processing of request 2314286 on node DC-UAT-EBS-154 at 17-APR-2013 09:42:46.
    Post-processing of request 2314286 failed at 17-APR-2013 09:42:46 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------*

    ------------- 2) PRINT -------------*
    Not printing the output of this request because post-processing failed.
    --------------------------------------*

    Finished executing request completion options.

    I have tried some possible solutions, but all did not work. I hope you become the Hero of the day.

    Thank you,
    Samuel.

    ---------------------------------------------------------------------------*
    Concurrent request completed
    Current system time is 17-APR-2013 09:42:46

    ---------------------------------------------------------------------------

    DB:2.88:Beginning Post-Processing m3

    Dear Good People,

    I am soooooooooo grateful for your quick response. However, I escalated the problem to the DBA Unit for further action since it is more of their responsibility, thus regarding your suggestion. I will get back to you as soon as it's resolved.

    Thank you

    Your Good Friend,
    Samuel

  • RELEVANCY SCORE 2.84

    DB:2.84:C3_Core_Error_En_504 jx



    Hi

    I migrated a universe and a webi report and dependencies from dev to prod through Promotion Management Tool. The job was successful. But when I opened the report it threw error. When I checked the universe there was an object with tablename..columnname instead of tablename.columnname. So I rollback the job and corrected it in dev server.

    But When I try to open any other previuolsy working Webi reports in Prod it threw error "c3_core_error_en_504".

    Dashboards also threw error "Request processing failed. (XLS 000009) com.businessobjects.mds.securedconnection.exception.SecuredConnectionException: Unable to retrieve the connection from the CMS. Check if the connection exists in the CMS and if you have rights."

    But any user in Admin Group can access the reports and dashboards in Prod without any error.

    I already followed what said in

    1746212 - Error: "Webi C3_core_error_en_504" while refreshing the Web Intelligence Document in SAP BO BI 4.0

    1645566 - A Web Intelligence report Refresh throws c3_core_error_en_504 in BI 4.0

    1842353 - Error c3_core_error_en_504 when refreshing webi reports based on ODBC connections, migrated with Upgrade

    Management Tool

    Version : SAPBO SP4 14.0.4.738

    Please help me experts...

    Thanks

    Sandeep

    DB:2.84:C3_Core_Error_En_504 jx


    Hi

    The error was due to promoting security while migrating the universe because already the same was in Prod Server ( from earlier migration).

    To solve this

    Go to CMCConnections Select the connection usedUser securitySelect the user grp(everyone)Assign Security....give the rights as below

    In Access levelsView on demand

    Advanced SystemRelational Connection Data Access, Data Access(Owner right) , Download Connection Locally, Download Connection Locally (owner right), Use connection for stored procedures, Use connection for stored procedures (Owner right) and

    Also uncheck the two 'inherit from..' checkboxes on top.

    Regards

    Sandeep

  • RELEVANCY SCORE 2.83

    DB:2.83:Issue With The Report Oracle.Apps.Xdo.Xdoexception:Error Creating Lock File js


    I am getting an error while submitting the XML publisher report in Betsy N0 instance.
    Issue

    Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
    Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
    Output :- Blank Report
    XML file :- XML file generated without any error
    Output process:-

    [12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
    [12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
    [12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
    [12/23/11 5:49:30 AM] [1213640:RT145481923]
    Template code: XXWIP_WO_VLVS
    Template app: XXWIP
    Language: en
    Territory: US
    Output type: PDF
    oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

    [12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

    DB:2.83:Issue With The Report Oracle.Apps.Xdo.Xdoexception:Error Creating Lock File js

    I am getting an error while submitting the XML publisher report in Betsy N0 instance.
    Issue

    Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
    Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
    Output :- Blank Report
    XML file :- XML file generated without any error
    Output process:-

    [12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
    [12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
    [12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
    [12/23/11 5:49:30 AM] [1213640:RT145481923]
    Template code: XXWIP_WO_VLVS
    Template app: XXWIP
    Language: en
    Territory: US
    Output type: PDF
    oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

    [12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

  • RELEVANCY SCORE 2.71

    DB:2.71:Connection Error? 9j


    Hi All,i am not able to connect the bex queries connections in query browser, showing error as "Request processing failed (XLS 000009).can you please help me on this.

    DB:2.71:Connection Error? 9j

    First try connecting to .unx universe if you get the error then check the web sevice url in CMC-Applications-web service .check if this accessible in browwser something http:/server/dswsbobjeIf it validates then Check the OLAP connection in CMC ,try with the predefined option and check if you get the same error

  • RELEVANCY SCORE 2.62

    DB:2.62:Request Processing Failed (Xls 000009) dd



    I'm using BI Dashboards 4, BI Platform 4 and Oracle 10g , when I Add Query in the query browser, after add nessesary dimesions then I press next at the step "Build Query", then I got following error:

    "请求处理失败。(XLS 000009)

    请求处理失败。(XLS 000009) [] lt;com.businessobjects.dsl.commons.exception.NestedException: oracle.jdbc.driver.OracleDrivergt;"

    I'm sure I have made the oracle driver configure correctly in the BI server and Client.

    "请求处理失败" means "Request Processing Failed".

    thanks for your help,

    Wilson Fu

    DB:2.62:Request Processing Failed (Xls 000009) dd


    Hi Amit,

    Thanks for your response.

    I tried the same, but it is not working. As i believe i do not have win64_x64 folder under SAP BusinessObjects Enterprise XI 4.0. This can be a reason? Please suggest.

    The same unx is working fine with webi. Please suggest.

    Thanks in Advance.

    Regards,

    Devashish

  • RELEVANCY SCORE 2.60

    DB:2.60:Unicode Conversion Export Error pp



    Dears,

    When we are doing unicode conversion of our ECC 6.0 system then during ABAP Database export, we are getting error as below:

    INFO: allocate build_partition_list: 8192

    INFO: processing ACCTCR.STR

    INFO: processing ACCTIT.STR

    INFO: processing BALDAT.STR

    INFO: processing BSAS.STR

    INFO: processing BSIM.STR

    INFO: processing BSIS.STR

    INFO: processing CKMI1.STR

    INFO: processing COEP.STR

    INFO: processing FMIFIIT.STR

    INFO: processing GLPCA.STR

    INFO: processing SAP0000.STR

    INFO: processing SAPAPPL0.STR

    INFO: processing SAPAPPL0_1.STR

    INFO: processing SAPAPPL0_2.STR

    INFO: processing SAPAPPL0_3.STR

    INFO: processing SAPAPPL0_4.STR

    INFO: processing SAPAPPL1.STR

    INFO: processing SAPAPPL1_1.STR

    INFO: processing SAPAPPL1_10.STR

    INFO: processing SAPAPPL1_11.STR

    INFO: processing SAPAPPL1_12.STR

    INFO: processing SAPAPPL1_13.STR

    INFO: processing SAPAPPL1_14.STR

    INFO: processing SAPAPPL1_15.STR

    INFO: processing SAPAPPL1_16.STR

    INFO: processing SAPAPPL1_17.STR

    INFO: processing SAPAPPL1_18.STR

    INFO: processing SAPAPPL1_19.STR

    INFO: processing SAPAPPL1_2.STR

    INFO: processing SAPAPPL1_20.STR

    INFO: processing SAPAPPL1_21.STR

    INFO: processing SAPAPPL1_22.STR

    INFO: processing SAPAPPL1_23.STR

    INFO: processing SAPAPPL1_24.STR

    INFO: processing SAPAPPL1_25.STR

    INFO: processing SAPAPPL1_26.STR

    INFO: processing SAPAPPL1_3.STR

    INFO: processing SAPAPPL1_4.STR

    INFO: processing SAPAPPL1_5.STR

    INFO: processing SAPAPPL1_6.STR

    INFO: processing SAPAPPL1_7.STR

    INFO: processing SAPAPPL1_8.STR

    INFO: processing SAPAPPL1_9.STR

    INFO: processing SAPAPPL2.STR

    INFO: processing SAPAPPL2_1.STR

    INFO: processing SAPAPPL2_2.STR

    INFO: processing SAPAPPL2_3.STR

    INFO: processing SAPAPPL2_4.STR

    INFO: processing SAPAPPL2_5.STR

    INFO: processing SAPCLUST.STR

    INFO: processing SAPCLUST_1.STR

    INFO: processing SAPCLUST_2.STR

    INFO: processing SAPCLUST_3.STR

    INFO: processing SAPDDIM.STR

    INFO: processing SAPDFACT.STR

    INFO: processing SAPDODS.STR

    INFO: processing SAPNTAB.STR

    INFO: processing SAPPOOL.STR

    INFO: processing SAPSDIC.STR

    INFO: processing SAPSDOCU.STR

    INFO: processing SAPSLEXC.STR

    INFO: processing SAPSLOAD.STR

    INFO: processing SAPSPROT.STR

    INFO: processing SAPSSEXC.STR

    INFO: processing SAPSSEXC_1.STR

    INFO: processing SAPSSEXC_2.STR

    INFO: processing SAPSSEXC_3.STR

    INFO: processing SAPSSEXC_4.STR

    INFO: processing SAPSSEXC_5.STR

    INFO: processing SAPSSEXC_6.STR

    INFO: processing SAPSSRC.STR

    INFO: processing SAPUSER.STR

    INFO: processing SAPUSER1.STR

    ERROR: ExeModify for write_ddloadd failed in row 43184

    (rc = 26)

    objectname = /BEV1/CLDEB~0

    objecttype = PRKEY APPL0

    tabart = APPL0

    rowcount = 0

    error message returned by DbSl:

    ORA-00001: unique constraint (SAPPRD.DDLOADD~0) violated

    Request you to kindly check and let me know what needs to be done for this error as we are unable to find any note or documents regarding this error.

    Thanks Regards,

    Amit

    DB:2.60:Unicode Conversion Export Error pp


    Hi,

    objectname = /BEV1/CLDEB0 objecttype = PRKEY APPL0 tabart = APPL0 rowcount = 0 error message returned by DbSl: ORA-00001: unique constraint (SAPPRD.DDLOADD0) violated

    Its means duplicate entry is there under schema SAPPRD and object /BEV1/CLDEB~0, check appl0 log findout the table and entry.

    Suman

  • RELEVANCY SCORE 2.55

    DB:2.55:Fatal Error. md



    Hi ,

    I have found below fatal error in one of the default trace file.

    Processing of child message for multi-message 4aeb1002-0475-5ea5-e100-0000c72a3093(INBOUND) failed. Reason: Processing of child message as seperate request failed. Reason: com.sap.aii.af.ra.ms.api.DeliveryException: Problem inserting 4aeb25af-05b8-0328-e100-0000c72a308a(INBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.

    Can any one please let me know the root cause and solution to the root cause.

    Thanks in advance.

    Ram

    DB:2.55:Fatal Error. md


    HI Ram,

    Did you find the solution for this..

    Regards,

    Prajwal

  • RELEVANCY SCORE 2.55

    DB:2.55:Profile Update Failed k3


    I cannot update my profile after login.

    This is the message I got:
    "We're sorry. There was a problem in processing your request."

    DB:2.55:Profile Update Failed k3

    I cannot update my profile after login.

    This is the message I got:
    "We're sorry. There was a problem in processing your request."

  • RELEVANCY SCORE 2.53

    DB:2.53:Ods Activation Failed 1a



    Hi All,

    ODS activation failed due to cause of the below error u201Cprocess 000009 returned with errors.

    what happened internally?why this error is coming frequentely.please give me step by step solution.

    Thnaks,

    chandu

    DB:2.53:Ods Activation Failed 1a


    a) goto transaction sm50 to check for running processes for your communication user.

    b) goto transaction sm21 and display the log entries for all servers and not only for the one you are currently logged on to.

    c) goto transaction st22 to check for dumps for your communication user in the relevant time.

    It would be better to provide you solution if you provide me the log entires.

  • RELEVANCY SCORE 2.49

    DB:2.49:One Or More Post-Processing Actions Failed 7a


    Hi,
    I am working on XML Publisher report and it was working fine till yesterday and i did some changes in the template level (i wrote some formulas in the data fields)
    and attached it the report.
    When i submit this request it is showing the completed warning message.

    When I check log file the messahe is "Beginning post-processing of request 62237205 on node GFSSUPDB at 18-SEP-2012 12:31:52.
    Post-processing of request 62237205 failed at 18-SEP-2012 12:31:52 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details."

    In system administrator when i check for this request it is saying that oracle.apps.fnd.cp.opp.PostProcessorException: XML output file is null
    but i can see the XML output when i click on the view output button.

    Please suggest me on this.

    Thanks,
    Surya.

    DB:2.49:One Or More Post-Processing Actions Failed 7a

    Just check with the generated XML are you able to generate the document using XML Publisher desktop. So we can be sure that the template is correct.

    Regards,
    Peddi.

  • RELEVANCY SCORE 2.48

    DB:2.48:Unable To "Select A Bex Query": Request Processing Failed (Xls 000009) Error.Bicsonly 83


    Hi all,I am using BO Dashboard Design 4.0 SP5. I want to select a BEx query via the Query Panel.After pressing the "Add Query" button, I enter my credentials for our BI platform 4.0 SP5.In the first step ("Select a data source"), I choose the Option "BEx Select a BEx query as a data source". I click the "Next" button.In the second step ("Select a BEx query"), I select server:port (username) - Connections - SAP_BW_B73. I click the "Next" button.A new dialog window shows up (window title: "Select a BEx query").Immediately, another small dialog window pops up (window title "Dashboards") with the following Content:Request processing failed. (XLS 000009)Request processing failed. (XLS 000009) [[error.bicsOnly] 0]Any ideas how to resolve this?

    DB:2.48:Unable To "Select A Bex Query": Request Processing Failed (Xls 000009) Error.Bicsonly 83

    Problem solved: The underlying connection (in my case: SAP_BW_B73) was corrupt (details could not be viewed in Information Design Tool) although the connection test itself worked. After creating a new connection access to queries was possible.Thanks to all People who have tried to help!

  • RELEVANCY SCORE 2.45

    DB:2.45:Transformation Of Xml Using Xslt And Copying It To Excel Worksheet 9c


    Hi All,
              I am working on a SSIS package which transforms XML files using XSLT and saves the transformed output as an excel file (.xls). The XML files I am working with are of the order of size 100 MB and more. I initially used an XML Task in my package to do the XSL transformation. The package failed with the exception System out of memory. Therafter, I used a Script Task to do the same XSL transformation which is surpisingly fast and efficient. 
             Now I have a requirement to copy the XSL transformed output excel file to an excel template file which contains a macro to do some processing. I implemented this in the same script task using the Microsoft.Office.Interop.Excel assembly. However, the process is painfully slow. The XSL transformation is very fast but the process of copying the transformed excel file to the excel template file is taking up lot of time. It takes about 1 hr 45 minutes to copy the XSL transformed excel file to the excel template using the Microsoft Excel interop object.
              I request the knowledgeable community members to come up with suggestions as to how I can speed up the copying of the XSL transormed excel file to the excel template using SSIS. Any workarounds are also welcome.
     
    Thanks in anticipation,
      CodeKracker. 

    DB:2.45:Transformation Of Xml Using Xslt And Copying It To Excel Worksheet 9c

    You'll probably be better served in an Office Automation forum, at this point:  http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=174275SiteID=1
     

  • RELEVANCY SCORE 2.45

    DB:2.45:Ods Activation Errors 73



    I got errors during ODS activation. Following are the messages.

    ______________________________________________________

    Requests (messages): Everything OK

    Extraction (messages): Everything OK

    Transfer (IDocs and TRFC): Everything OK

    Processing (data packet): Everything OK

    Subseq. processing (messages) : Errors occurred

    Activation of data records from ODS object ODS-XX started

    SIDs determined successfully for request

    Inserted records 1- ; Changed records 1- ; Deleted records 1-

    Request REQU_XXXXXXXXXXXXXXXX , data package 000008 not correct

    Log for activation request ODSR_XXXXXXXXX data package 000001...000009

    Function aborted

    Activation of data records from ODS object ODS-XX terminated

    Communication error (RFC call) occurred

    __________________________________________

    I checked PSA. I could not find errors.

    Can some one suggest probable causes of errors.

    Thanks

    DB:2.45:Ods Activation Errors 73


    The error is occuring while activation of the request , this means there might be some inconsistancy in data. In such case data goes upto New Data tabel but it gives error while activation.

    Try this...

    Go to monitor and go to "Details" tab, check error messages here , it will give u exactly where is the error. Correct that error and activate (if necessery delete the request and reload) it.

  • RELEVANCY SCORE 2.43

    DB:2.43:Posr Processing Error-Request Completing With Warning-Not Showing Output dc


    Hi All,
    When I am Running my request its giving following error..........
    "Beginning post-processing of request 610151 on node INFTW6800CD2 at 09-AUG-2006 05:45:15.
    Post-processing of request 610151 failed at 09-AUG-2006 05:47:16 with the error message:
    The Output Post-processor is running but has not picked up this request.
    No further attempts will be made to post-process this request, and the request will be marked
    with Warning status.
    Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary."

    I set that profile option also...but still i am getting the same error....
    I had created a report and then attached a RTF template with that....

    Can any one help me out.....
    Regards
    Ravi

    DB:2.43:Posr Processing Error-Request Completing With Warning-Not Showing Output dc

    Hi All,
    When I am Running my request its giving following error..........
    "Beginning post-processing of request 610151 on node INFTW6800CD2 at 09-AUG-2006 05:45:15.
    Post-processing of request 610151 failed at 09-AUG-2006 05:47:16 with the error message:
    The Output Post-processor is running but has not picked up this request.
    No further attempts will be made to post-process this request, and the request will be marked
    with Warning status.
    Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary."

    I set that profile option also...but still i am getting the same error....
    I had created a report and then attached a RTF template with that....

    Can any one help me out.....
    Regards
    Ravi

  • RELEVANCY SCORE 2.43

    DB:2.43:Request Processing Failed (Xls 000009) cs



    Hi,

    I got this error when I tried to open one of my dashboard (swf) that displayed :

    Request processing failed. (XLS 000009) while trying to invoke the method org.eclipse.emf.common.util.BasicEMap$Entry.getHash() of an object loaded from local variable 'entry'

    I have tried to document the step by step to simulate the error generation, however,I just couldn't identify anything wrong with my dashboard.

    Does anyone has any ideas what is the error about ?

    Development Tools:

    Dashboard Designer 4.0 (Query Browser)

    Adobe Flash player 10

    BO SP 02 Patch 14

    Thanks and Regards,

    rachael

    DB:2.43:Request Processing Failed (Xls 000009) cs


    Hi Amit,

    We used oracle 11g to create the UNX, dashboard design 4.0 (version 14.0.2.641), no patch is used.

    I have checked the servers and they seemed to run fine.

    This error message seems to appear inconsistently. Sometimes when I open the dashboard, the java error message will popup automatically, but when I close the dashboard and reopen it again,

    the error will go disappear and the dashboard will work fine.

    Thanks and Regards,

    rachael

  • RELEVANCY SCORE 2.42

    DB:2.42:Database Server Not Found Error 97



    Hi,

    I am trying to use the Query Builder in Dashboards 4.1 to build a query to a Universe that sits on top of a Sybase IQ DB. Within Information Design Tool, where the Universe was built, I can query the DB fine and see the results as expected. When I try to run the same query in Dashboards I get the following error:

    Request Processing Failed (XLS 000009)

    Request Processing Failed (XLS 000009) []

    lt;com.businessobjects.dsl.commons.exception.NestedException;

    [Sybase][ODBC Driver][SQL Anywhere] Database Server not foundgt;

    Does anyone have any idea what is going on? I've been racking my brain over this for a few days and have yet to find a solution.

    Thanks for your help!

    Jeff

    DB:2.42:Database Server Not Found Error 97


    Hi Jeff! How are you?

    Could you fix this situation? Can you share please?

    Thanks in advance.

  • RELEVANCY SCORE 2.42

    DB:2.42:Problem Adapter Jdbc/Receiver jx



    Hello,

    I am running a stored procedure with CC JDBC/Receiver, and it returned me the following error:

    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'sp_consulta_carteira_clientes' (structure 'Statement'): java.sql.SQLException: The 'CREATE TABLE' command is not allowed within a multi-statement transaction in the 'tempdb' database.

    Can anyone help me, CC JDBC / Receiver, does not support transactional multi processing ?

    Thank you all.

    Marlon

    DB:2.42:Problem Adapter Jdbc/Receiver jx


    Hi Marlon.

    Try to change The Transaction Level in the Communication Channel JDBC, maybe it works.

    Ask to Legacy Team can change the stored procedure without CREATE TABLE command.

    Regards.

    Bruno

  • RELEVANCY SCORE 2.42

    DB:2.42:Concurrent Request Completed With Warnings ap


    Hi

    Concurrent Request Completed with Warnings

    Log as Below

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 1893938 on node DPQEAPS01 at 14-JUL-2009 15:00:54.
    Post-processing of request 1893938 failed at 14-JUL-2009 15:02:54 with the error message:
    The Output Post-processor is running but has not picked up this request.
    No further attempts will be made to post-process this request, and the request will be marked
    with Warning status.
    Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary.

    Thanks

    With Regards

    Umair

    DB:2.42:Concurrent Request Completed With Warnings ap

    Hi,

    Is this a custom or standard concurrent program?

    Can you find more details in the OPP log file?

    Set the timeout to some higher value (as per the following documents) and check again.

    Note: 352518.1 - Concurrent Request Fails Due to Timeout of the Post Processing Action
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOTp_id=352518.1

    Note: 364547.1 - Troubleshooting Oracle XML Publisher For The Oracle E-Business Suite
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOTp_id=364547.1

    Regards,
    Hussein

  • RELEVANCY SCORE 2.41

    DB:2.41:Request Processing Error 9k



    Hi All,

    When i run the objects in query browser i am getting error "request processing failed xls 000009" see your business objects administrator.as well as when i preview the dashboard click the refresh query button also i am getting same error.

    working on top of Bex queries.

    version 4.1

    sp2

    if any one can help me on this.

    Thanks in advance...

    DB:2.41:Request Processing Error 9k


    Hi,

    If you are using Structure in your Query as per note 1974638, It is mandatory to add the row structure in your query in Dashboards.
    Else try to check by restart Dashboard Processing and Cache Servers.

    Regards,
    Venkat.

  • RELEVANCY SCORE 2.39

    DB:2.39:Sp 2013 - Crawling .Docx Fine But Not .Xlsx Or .Doc 79


    PDF's and Docx are crawling just fine but not xls, xlsx, and doc
    Error: The content processing pipeline failed to process the item. ( Error parsing document 'https://..../CustomerAdvocate/Shared Documents/1 Welcome Letter.doc'. It was not possible to acquire a worker. Proxy '326' failed to acquire worker. Sandbox
    worker pool is closed.; )
    I have verified:
    1. Proper permissions
    2. IFilter is allowing xlsx and doc
    Please assist.

    DB:2.39:Sp 2013 - Crawling .Docx Fine But Not .Xlsx Or .Doc 79

    Hi Ron,
    According to your description, my understanding is that you got an error when you searched xls, xlsx, and doc files in SharePoint 2013.
    Please add the Search Service Application service account to the local admin group on the SharePoint server, then compare the result. About adding an account to local admin group, you can refer to the link below:
    http://social.technet.microsoft.com/wiki/contents/articles/13436.windows-server-2012-how-to-add-an-account-to-a-local-administrator-group.aspx
    Here are some similar posts for you to take a look at:
    http://social.msdn.microsoft.com/Forums/en-US/fd0f24b4-1802-4182-bdc4-6c732fb11cd7/search-service-failed-to-acquire-worker?forum=sharepointsearch
    http://trikks.wordpress.com/2013/03/19/fixing-the-sharepoint-2013-search-error-the-content-processing-pipeline-failed-to-process-the-item/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • RELEVANCY SCORE 2.39

    DB:2.39:Dataload Failure In Process Chain x1



    Hello Gurus,

    We have a dataload problem.

    This is a master data load, Full load, with PSA and Infoobject in series as the processing type.

    The messages form the application log are:

    Initially, the request turned red with the following error messages:

    Data Package XX : arrived in BW ; Processing : 1 duplicate record found. 2 recordings used in ta (available)

    Data Package XX : arrived in BW ; Processing : Lock NOT set for: Loading master data attributes

    Data Package XX : arrived in BW ; Processing : User BWREMOTE locked the load of master datas for

    We repeated the load usually but it failed again because, strangely, the records kept updating in the red request that failed first.

    The error message for the second failed load was:

    Data Package XX : arrived in BW ; Processing : Lock NOT set for: Loading master data attributes

    Data Package XX : arrived in BW ; Processing : User BWREMOTE locked the load of master datas for

    Please note that these are the similar as the error messages of the first message.

    Finally after a few hours the record count got stopped in the first failed request. Then we repeated the load and this time it was successful.

    If there were duplicate records, the request should have failed again and again, but it loaded successfully after some time without any modifications to the data.

    Could you please discuss the scenario and the casue for this along with the solution.

    Thanks in advance,

    Raj

    DB:2.39:Dataload Failure In Process Chain x1


    hai go to sm12 check is there any lock for that master data , if u have plase wait till the masterdata lockis removed , as it may be used by the some other user ,

    for duplicate error u change the setting for the infocpake where u can find the removing of duplicate option in UPDATE mode of info package ,

  • RELEVANCY SCORE 2.39

    DB:2.39:Request Processing Failed (Xls 000009) In Sap Dashboards 4.1 3x



    Hi all,

    i have a problem with my SAP Dashboards, when im trying to add a query with a data source from a bo universe the next error appears

    this did not happend two days ago, and i have no idea what to do now.

    This universe is connecting to a table from a database on SQL server 2008 r2.

    My Dashboards version is 4.1 (sp3) and my BO version is 14.0.7

    DB:2.39:Request Processing Failed (Xls 000009) In Sap Dashboards 4.1 3x


    Hi Amit, thank you for you answer , i will try with the same patch, ill tell you if it worked

  • RELEVANCY SCORE 2.38

    DB:2.38:Request Processing Failed. (Xls 000009) Request Processing Failed. (Xls 000009) [] Lt;Com.Businessobjects.Semanticlayer.Qt.Qtexception: Query Script Generation Failed. See Your Businessobjects Administrator. {0} (Wis 00013)Gt; xx



    Hi

    I am using bex as a design tool for my query. I am putting the values from bex query to excel sheet and on excel sheet i am having my prompt cell such as years. My dashboard is working fine for all my dashboards in prematurity stages but dont know what happen near maturity stage. The below error occurs when I preview my dashboard, creating swf file. It started happening to all my dashboards linked to bex query. Once i remove the connection of prompt cell from the excelsius. The dashboard works fine without any errors.

    My question why this doesn't happen in start and now error is occuring. Previously i was using dashboard version 4 when error occured then i read threads in which some one told that in latest versions the issue is addressed, now using version six but the same problem

    Your suggestions and solutions appreciated and points will be awarded.

    error: Request processing failed. (XLS 000009) Request processing failed. (XLS 000009) [] lt;com.businessobjects.semanticlayer.qt.QTException: Query script generation failed. See your BusinessObjects administrator. {0} (WIS 00013)gt;

    Best Regards

    Jawad

    DB:2.38:Request Processing Failed. (Xls 000009) Request Processing Failed. (Xls 000009) [] Lt;Com.Businessobjects.Semanticlayer.Qt.Qtexception: Query Script Generation Failed. See Your Businessobjects Administrator. {0} (Wis 00013)Gt; xx


    Hi Jawad

    If you want to publish it on web you need some microsoft compatible components which should not be a part of pirated copy,as suggested,microsoft frontpage,office,access which can also be a responsible tool for creating charts ,spreadsheet in Dashboard's.

    Please Check whether you are using the Original License Version of the above tools,which may resolve your problem(as you mentioned that you upgraded which eventually needs the upgrade of the microsoft supporting web tools also).

    If You are using any add-on Component also check whether you have the flex 4 component upgraded.

  • RELEVANCY SCORE 2.38

    DB:2.38:Xmlp Report Ends In Completed - Warning 78


    Hi Gurus..

    I ran the concurrent program and it ends in Completed - Warning.
    I checked the Log File and it shows the following message:

    ---------------------------------------------------------------------------
    Executing request completion options...

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 1559015 on node PROFIT9 at 20-MAY-2009 06:06:10.
    Post-processing of request 1559015 failed at 20-MAY-2009 06:06:11 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    ------------- 2) PRINT -------------
    Not printing the output of this request because post-processing failed.
    --------------------------------------

    Then i checked concurrent Program Diagnostics View XML
    I get the following error message at the bottom:

    Missing equals sign between attribute and attribute value.

    APPLICATIONS TEMPLATE REPORT/APPLICATIONS TEMPLATE REPORT

    Can anyone tell me why this is happening...?

    Thanks in Advance,
    Raj

    DB:2.38:Xmlp Report Ends In Completed - Warning 78

    Anyone has any idea what is this APPLICATIONS TEMPLATE REPORT? and Where is it used in the rdf? What is it's significance?

    Regards,
    Abhijit

  • RELEVANCY SCORE 2.38

    DB:2.38:Requestprocessor] Error Processing Action Request /Action/Login : [Noclassdeffounderror] Org/Aspectj/Runtime/Internal/Aroundclosure 3k


    tengo el vmware server 2 todo esta bien instalado aparentemente. para logearme me da Operation failed. en el log del proxy me sale

    Error processing action request /action/login : org/aspectj/runtime/internal/AroundClosure

    no logro ver donde esta el problema.

    S.O utilizado es Debian etch 4.0

    help me please

    DB:2.38:Requestprocessor] Error Processing Action Request /Action/Login : [Noclassdeffounderror] Org/Aspectj/Runtime/Internal/Aroundclosure 3k

    tengo el vmware server 2 todo esta bien instalado aparentemente. para logearme me da Operation failed. en el log del proxy me sale

    Error processing action request /action/login : org/aspectj/runtime/internal/AroundClosure

    no logro ver donde esta el problema.

    S.O utilizado es Debian etch 4.0

    help me please

  • RELEVANCY SCORE 2.38

    DB:2.38:Link Failed 1x


    I was trying to contact the Oracle education for a specific course and this link failed saying, '

    http://www.oracle.com/education/index.html?contact.html

    An error occurred while processing the request.
    Try refreshing your browser. If the problem persists contact the site administratorCheers
    Sarma.

    DB:2.38:Link Failed 1x

    Not sure where you found this bad link, but the correct one is http://www.oracle.com/education/contact.html.

    Cheers, OTN

  • RELEVANCY SCORE 2.38

    DB:2.38:Dashboard: Build Query Issue: Request Processing Failed.(Xls 000009) a7



    Hi Experts,

    I am trying to create a dashboard using universe. I followed below steps...

    Select a Data Source -- Select A universe -- Build Query

    When I select a universe and try to build a query I am getting below error

    Request processing failed. (XLS 000009)

    Request processing failed. (XLS 000009)[ ]

    lt;com.businessobjects.semanticlayer.qt.internal.QTInternalException;Query script generation failed. See your BusinessObjects administrator.{0} (WIS 00013)gt;

    Please help me with this issue.

    Thanks in advance..

    Regards,

    Raja

    DB:2.38:Dashboard: Build Query Issue: Request Processing Failed.(Xls 000009) a7


    Hi Suman,

    In our system we have already created DSL bridge adaptive server. Its heap size also defined as per the document.

    I am still facing the issue.

    Regards,

    Raja.

  • RELEVANCY SCORE 2.38

    DB:2.38:How Can I Delete Failed Delta From Infoobject Table 91



    Hi All,

    My delta upload to one of the Infoobject failed, its processing was "Not in PSA but in Infoobject table at once".

    How can i delete this delta and request repeat again, coz when i go to that infoobject, right click for context menu it doesnt show "manage" where i can see the failed request and delete it.

    Now i changed its processing to PSA Infoobject table so that in future i can use request from PSA.

    How can i delete this failed request???( do i need to delete all the master data for that infoobject reload again or any other viable solutions????)

    Thanks in Advance

    Regards

    Robyn.

    DB:2.38:How Can I Delete Failed Delta From Infoobject Table 91


    Hi Robyn,

    Usually when a Master Data Delta Load fails, we have to do an initialization as Repeat is not supported by Master Data Loads.

    In the infopackage for the load(full load).

    Goto Processing Tab, choose the option "Only PSA" , "UPdate subsequently in data targets:" and "Ignore duplicate records".

    If this does not work, pls use Error Handling from the Update Tab to ignore errors.

    Once the full load is successful, you can turn the Delta Request(failed request) GREEN (But this is not advised, do this only if you cannot afford to lose time going for an initialization)

    Hope this helps,

    Praveen.

  • RELEVANCY SCORE 2.37

    DB:2.37:One Or More Post-Processing Actions Failed. Consult The Opp Service Log... xk


    Hi,

    I created a data definition and uploaded the template. When i ran the report am getting the below error. Can you please explain how to overcome this error.

    Beginning post-processing of request 3251783 on node PL1UA119 at 25-OCT-2011 11:06:28.
    Post-processing of request 3251783 failed at 25-OCT-2011 11:06:29 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.

    In the Output Post Processor this is the below error in Manager Log

    Template code: XXTEK_RAXINV_BATCH
    Template app: XXTEK
    Language: en
    Territory: US
    Output type: PDF
    [UNEXPECTED] [324988:RT3258688] java.io.FileNotFoundException: /u003/app/applmgr/TEKAAD1/comntop/admin/out/TEKAAD1_pl1ua119/o3258688.out (No such file or directory)
    at java.io.FileInputStream.open(Native Method)
    at java.io.FileInputStream.(FileInputStream.java(Compiled Code))
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:229)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

    Thanks

    DB:2.37:One Or More Post-Processing Actions Failed. Consult The Opp Service Log... xk

    My best guess based on the information presented is that perhaps the actual concurrent program did not generate any output. If you do a 'View Output' is anything there? Is the file mentioned actually on the file system?

  • RELEVANCY SCORE 2.37

    DB:2.37:Ods Activation Issues.... mp



    Hi Guys,

    Error occured while Further processing from ZFI_DS12 to ZFI_C01(cube) and ZSL_DS01(ODS) got failed with error message Request REQU_8WDD54OTUQQ49FXSK5HJR0BFC properly ended; no further processing allowed. Inf package having processing only data targets.

    What i did is deleted the request form the ZFI_DS12 to ZFI_C01(cube) and ZSL_DS01(ODS).

    created new info package with PSA and data targets seris with Full Load, which is got successflly loaded. and updated further data targets also from ZSL_DS01(ODS).

    To unable to delete again ZFI_DS12 to ZFI_C01(cube) and ZSL_DS01(ODS) data targets, i run init request without data trasfer which is got failed while init request is runnng activation process, which is giving error message Full updates already available in ODS ZSL_DS01(ODS);Cannot update init./delta

    How do i get the request activation of init request form OSD....?

    Thanks,

    Ven

    DB:2.37:Ods Activation Issues.... mp


    Hi Partr,

    Sorry for late responce, any how your informaiton is vey helpfull. and assinged points aslo.

    Thanks,

  • RELEVANCY SCORE 2.36

    DB:2.36:Request Processing Failed. (Xls 000009) mm



    Hi,

    When I'm trying to create Query on top of Universe using Query Browser in Dashboard Design, I'm getting following error:

    Request Processing Failed. (XLS 000009)

    Request Processing Failed. (XLS 000009) [ ]

    lt;com.businessobjects.dsl.common.exception.Nested Exception:OLE DB Provider CLSID not specified or erroneousgt;

    I'm using SQL Server 2005 datasource with OLE DB driver used to create connection in Information Design tool.

    I'm able to run a WebI report using this universe and it runs fine with no errors.

    Please let me know how to fix this issue.

    My Environment : BO 4.0 SP02 Patch 9

    Dashboard Design : SP02 Patch 9.

    Thanks

    John

    DB:2.36:Request Processing Failed. (Xls 000009) mm


    Hi John,

    This is a quite generic error that we come across and if you are using obbc drivers then follow these steps

    1) create 2 dsn's one 32 bit and one 64 bit and both need to be of the same name.

    2)test the connection in IDT and you need to have rights over universe as well.

    3)use .unx universe in query browser .If webi works then dashboard should work as well.

    Thanks and Regards,

    Amit K

  • RELEVANCY SCORE 2.36

    DB:2.36:Request Failed When Adding Or Editing Items In Portal a7


    Hi all,

    When adding or editing items in portal ,it throws and error

    Error
    General invalidation message processing exception: An error occurred while closing the HTTP connection after receiving an error while getting the invalidation response from Web Cache: ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1389
    ORA-29261: bad argument
    ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1231
    ORA-29259: end-of-input reached (WWC-40018)
    General invalidation message processing exception: An error occurred while getting the invalidation response from Web Cache: ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1231
    ORA-29259: end-of-input reached (WWC-40018)

    and webcacheadmin page is also not opening.
    PLs help me.

    Thanks and Regards,
    Azeem.

    DB:2.36:Request Failed When Adding Or Editing Items In Portal a7

    Hi,

    our webache invalidator was not working as its port(9400.9401,9402) were occupied by some other applications on the server ,
    By making those ports free for webcache,now webcacheadmin page is getting accessed and i am able o edit items in portal sucessfully now.

    Thanks and Regards,
    Azeem.

  • RELEVANCY SCORE 2.36

    DB:2.36:(Xls 000009) Universe Generation Failed 1s



    Hello guys,

    I created a BICS connection for a query and created a dashboard on top of the BICS connection using Query browser.

    The authentication type for BICS connection is "Use specified user name and password". we are not using SSO.

    When i run the dashboard on BOE it works fine with the id "administrator" with which i have also created BICS connetion.

    But when i run the dashboard with other user id it gives me error " (XLS 000009) Universe generation failed for resource id "AVcT9WJFnQhKuIG1erpdg.Q".

    I am unable to find the actual problem, i checked with creating webi report on top of this BICS connection. Its working fine with administrator id but not opening with other user in BOE. Below is the screen shot.. Please help

  • RELEVANCY SCORE 2.36

    DB:2.36:Jdbc Receiver Communication Channel Error pm



    Hi Friends,

    I am facing below error in JDBC Receiver Communication chnnel.

    Please shared your views.

    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'KRSAPJOB' (structure 'Statements'): java.sql.SQLException: [SQL0204] KRSAPJOB in KRONOSMF type *FILE not found.

    thanks

    Mohit

  • RELEVANCY SCORE 2.36

    DB:2.36:Request Processing Failed. (Xls 000009 ) Dashboard 4.1 Sp04 mp


    Hi experts, I'm facing this issue in dashboard design: "Request processing failed. (XLS 000009 )"It is an intermittent error, it happens when adding a BICS connection in Dashboard Query Browser. The BICS connection has been configured with SSO. The error happens in DEV environment, in PRD works fine.We have configured HTTPS with SSL on Tomcat and SSO with Windows AD. We have configured CORBA SSL as well.We have created alias for Enterprise and WindowsAD usersThe error happens with Enterprise and WindowsAD authentication.The error happens in DEV environment, in PRD works fine (same configuration).In Webi (DEV and PRD) this connections works fine always.There are a few notes about it but don't have the solution.Our System: SAP BI Platform 4.1 SP04 Patch 4 on Windows Server 2008.The error happens after upgrade from 4.0 SP06.Any help would be appreciated.Regards, Sergio Gordon

    DB:2.36:Request Processing Failed. (Xls 000009 ) Dashboard 4.1 Sp04 mp

    Hi Niraj,Thanks for yor reply.The authentication mode is SSO and the connections work fine in Web Intelligence Rich Client.I'm going to check Fiddler Logs.Thanks.Sergio

  • RELEVANCY SCORE 2.35

    DB:2.35:Users Unable To Open Out Files In Ebs s9


    Hi in R12 users are getting Post-processing of request failed error message when opening the out files. please help.
    thanks

    DB:2.35:Users Unable To Open Out Files In Ebs s9

    968651 wrote:
    r12.1.3
    11gr2Please post the complete error message or the complete contents of the request log file here.

    Does this happen with certain request(s) or all of them?

    Thanks,
    Hussein

  • RELEVANCY SCORE 2.35

    DB:2.35:Authloginexception: Error Occurred While Processing Xml Request 73


    I added the com.waveset.adapter.SunAccessManagerResourceAdapter to IDM, but when trying to test my new resource connection I get:

    Test connection failed for resource(s):
    SunAccessManager: Could not connect as user 'amAdmin' with specified password. == com.sun.identity.authentication.spi.AuthLoginException: Error occurred while processing XML request. Server returned HTTP response code: 500 for URL: http://am.example.com:80/amserver/authservice

    I can access the URL directly and get: "Webtop 2.5 Platform Low Level request servlet"

    -Steve Maring

    DB:2.35:Authloginexception: Error Occurred While Processing Xml Request 73

    I added the com.waveset.adapter.SunAccessManagerResourceAdapter to IDM, but when trying to test my new resource connection I get:

    Test connection failed for resource(s):
    SunAccessManager: Could not connect as user 'amAdmin' with specified password. == com.sun.identity.authentication.spi.AuthLoginException: Error occurred while processing XML request. Server returned HTTP response code: 500 for URL: http://am.example.com:80/amserver/authservice

    I can access the URL directly and get: "Webtop 2.5 Platform Low Level request servlet"

    -Steve Maring

  • RELEVANCY SCORE 2.35

    DB:2.35:User J2ee_Guest, Ip Address Http Request Processing Failed... kx



    Hi All,

    I detected at Java Virtual Administrator following error:

    iUser J2EE_GUEST, IP address HTTP request processing failed. HTTP error [401] will be returned. The error is [No login module succeeded.No details available]./i

    Does anybody know this error and what is to do?

    Many thanks in advanced!

    Regards,

    Jochen

    DB:2.35:User J2ee_Guest, Ip Address Http Request Processing Failed... kx


    Hi All,

    You can simply ignore this entry in trace, as it doesnt mean any error.

    It was caused probably by TA SM59 - RFC destination:

    INTEGRATION_DIRECTORY_HMI - connection test, and it is exactly the

    answer that we expect from the system.

    (for further details please check XI 3.0 installation guide, page 40.)

    Regards,

    Jochen

  • RELEVANCY SCORE 2.35

    DB:2.35:Dimension Processing Failing (Incremental) sk


    I have an integration services package that includes a data flow transformation that does an incremental processing for
    a dimension and when I run the package I get the below errors:

    [Dimension Processing [2]] Error: Parser: An error occurred during pipeline processing.
    [Dimension Processing [2]] Warning: Parser: Out of line object 'Binding', referring to ID(s) 'Keynote_3, DimPageDetail', has been specified but has not been used.
    [Dimension Processing [2]] Warning: Parser: Out of line object 'Binding', referring to ID(s) 'Keynote_3, DimPageDetail', has been specified but has not been used.
    [Dimension Processing [2]] Warning: Parser: Out of line object 'DataSource', referring to ID(s) '', has been specified but has not been used.
    [Dimension Processing [2]] Error: Internal error: An unexpected error occurred (file 'pcproperty.cpp', line 197, function 'PCProperty::GetKeyBindings').
    [SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component Dimension Processing (2) failed with error code 0x80004005 while processing input AnalysisServicesServerInput (15). The identified
    component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
    failure.
    [Dimension Processing [2]] Error: XML for Analysis parser: The commit or rollback request cannot be completed because there is no active transaction in this session.
    [SSIS.Pipeline] Error: Dimension Processing failed the post-execute phase and returned error code 0x80004005.

    DB:2.35:Dimension Processing Failing (Incremental) sk

    Hi SQLGun,
    Base on my research, the issue can be caused by a duplicate dimension key value in the data source is used by the Analysis Services processing. Please change the Duplicate Key error action to Report and continue (recommended) or Ignore
    error to resolve this issue. Here are some links that might helpful for you, please see:
    http://ms-olap.blogspot.co.uk/2009/11/duplicate-attribute-key-has-been-found.html
    http://msdn.microsoft.com/en-us/library/ms174774.aspx
    http://support.microsoft.com/kb/2876882
    Hope this helps.
    Regards,

    Charlie Liao
    TechNet Community Support

  • RELEVANCY SCORE 2.34

    DB:2.34:Post-Processing Of Requested Failed fk


    We are running 11i.XDO.H(3263588)

    1)Post processing of one of our XML Publisher enabled report failed with the following error:

    Post-processing of request 3165233 failed at 12-MAY-2006 14:16:14 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.

    2) I looked at the XML output of the report. It has some special character. Ascii value of this special character is 253.

    5) How do we overcome this issue?

    DB:2.34:Post-Processing Of Requested Failed fk

    I am guessing Patch 4473635 ... Hope it works

    Thanks
    srini

  • RELEVANCY SCORE 2.34

    DB:2.34:Request Is Complted With Warning pm


    One user informed me that he trying to submit one resuest it always errored out.Here is the log file for those.

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 265191 on node EORAAPD10 at 14-APR-2006 20:51:43.
    Post-processing of request 265191 failed at 14-APR-2006 20:51:45 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    Post Processor Log file:
    I bounced the OPP for the same. But same issue still there please help me.

    DB:2.34:Request Is Complted With Warning pm

    Hi,

    What does the OPP log file say?

    Can you find any errors in the database log file?

    Regards,
    Hussein

  • RELEVANCY SCORE 2.34

    DB:2.34:Errors After Upgrade From 4.0 To 4.1 In Webi And Dashboard z9



    Hi, after upgrading from 4.0 to 4.1 we got the foloowing errors:

    - When opening the Web Intelligence Report:

    Fatal exception occured. The cause was: com.businessobjects.corba.generic.container.proxy.internal.dependencyfailovercallbackimpl$failoverfatalexception: prepare failover failed (error: INF)

    - When opening the Dashboard:

    Error de procesamiento de solicitud. (XLS 000009).

    Error de procesamiento de solicitud. (XLS 000009) Failed to connect to the OLAP source.

    In pictures 1 and 2, you can see these errors.

    Any ideas of what has happened and how to solve this?

    Thanks in advance!

    Florencia

    DB:2.34:Errors After Upgrade From 4.0 To 4.1 In Webi And Dashboard z9


    We solved it, there were some OLAP connections with a user with an expired password, now we change it to the communication user.

    Thanks!

  • RELEVANCY SCORE 2.34

    DB:2.34:Http Request Processing Failed. Http Error [401] Will Be Returned ff



    Hi,

    if i try to open the message monitoring for the integration server, the system writes an exception in the system log(server.0.log). The Exception is:

    HTTP request processing failed. HTTP error [401] will be returned

    Could someone help?

    Thank you and have a nice day.

    Markus

    DB:2.34:Http Request Processing Failed. Http Error [401] Will Be Returned ff


    Hello,

    the solution for my problem is the note 764176.

    Thanks all for your help

  • RELEVANCY SCORE 2.34

    DB:2.34:Jdbc Receiver Channel Error k1



    Hi All,

    We are facing the error in receiver jdbc channel stating as

    "Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'CSSV.AIT016_CRM_CSS_STG' (structure 'StatementName'): com.ibm.db2.jcc.a.ym: DB2 SQL Error: SQLCODE=-407, SQLSTATE=23502, SQLERRMC=FULL_NAME, DRIVER=3.51.90"

    Any inputs are welocme.

    Regards,

    Sabitha.

    DB:2.34:Jdbc Receiver Channel Error k1


    Getting new error in receiver JDBC channel .

    SQLCODE=-803, SQLSTATE=23505, SQLERRMC=AIT016I1;0000001303, DRIVER=3.51.90

  • RELEVANCY SCORE 2.33

    DB:2.33:Error While Exporting Crystal Report In Xls x3



    Hi

    when i am exporting crystal report in PDF or MS-Word its working fine

    When i am going to export crystal report to Microsoft-Excel 97-2000 (XLS) i am encountering ....

    Error in File C:\WINNT\TEMP\{6A5FE727-7FDE-479F-A7D0-96EE33EF5A4F}.rpt: The request could not be submitted for background processing. this error...

    Can anybudy plz have its solution??

    Edited by: vishal patil on Sep 29, 2008 3:21 PM

    DB:2.33:Error While Exporting Crystal Report In Xls x3


    Hi Graham,

    First of all Thanks For Your Reply.....

    i have troubleshooted all report and in my report i have seen that one of my field was touched to its below section.

    My problem is solved ........

    Thanks For Your Valuable Support.....

  • RELEVANCY SCORE 2.33

    DB:2.33:Xcelsius Cannot Connect To Essbase 11.X xs



    I have the following trouble, i need to connect a dashbboard to an ESSBASE based UNX, however when i try to make the query in the query browser i get the message:

    XLS 000009

    the required Essbase client Jars were not found:

    ess_japi.jar; ess_es_server.jar; ojdl.jar, please check your configuration

    classpath.gt

    I reviewed the classpath in the tomcat console on JAVA options and put the path to those JAR's but it still does not work.

    we are using

    BO SP05 FP2 on windows server trying to connect to ESSBASE 11.X

    Any help will be apretiated. Regards and have a nice day.

    DB:2.33:Xcelsius Cannot Connect To Essbase 11.X xs


    Hi Henry,

    I followed the exact steps mentioned by you as well as in the Note 1758332. I am still getting following error in IDT.

    "The Essbase Client middleware is not installed".

    Also I just noticed, I don't have the following file or ODL folder

    3) Ojdl.jar under

    %HYPERION_HOME%/common/loggers/ODL/1.0.0/lib

    Any thoughts where I am going wrong?

    Thanks, Siva

  • RELEVANCY SCORE 2.33

    DB:2.33:Printing Problem mk



    Hi Friends,

    I am not able to print from SAP. On checking in SP01, the spool request is having the status as 'Error' and log is showing the following lines.

    -

    SAP spool error log

    =====================

    Print request processing log

    Errors occurred processing this print request

    OTF module: Failed to output print data

    The operating system is reporting problems

    File system full (file E:\usr\sap\PR2\D25\data\000000685800001.PR2)

    Errors occurred processing this print request

    Error during print request output. l_rc = 8

    There may be no printout

    -

    Could any one help me in solving the issue, pls.

    Regards,

    Mark K

    DB:2.33:Printing Problem mk


    Hi,

    I think you need to contact your basis

    message clearly says that

    u

    File system full (file E:\usr\sap\PR2\D25\data\000000685800001.PR2)

    /u

    aRs

  • RELEVANCY SCORE 2.33

    DB:2.33:Bw3.5 Dataflow: Fiap Dso To Cube Failed In Production : Process Chain Has Step Update Via Further Processing sd



    BW3.5 dataflow: FIAP DSO to Cube failed in production : process chain has step update via further processing

    How to fix this issue, becuase once delta fails the repear either brings 0 records to cube or the repeat shows a single request in manage and records are doubled.

    Please provide pointers.

    Thanks,

    Rashmi

    DB:2.33:Bw3.5 Dataflow: Fiap Dso To Cube Failed In Production : Process Chain Has Step Update Via Further Processing sd


    BW3.5 dataflow: FIAP DSO to Cube failed in production : process chain has step update via further processing

    How to fix this issue, becuase once delta fails the repear either brings 0 records to cube or the repeat shows a single request in manage and records are doubled.

    Please provide pointers.

    Thanks,

    Rashmi

  • RELEVANCY SCORE 2.33

    DB:2.33:Problem Rendering Word Documents s7


    Hi,

    I newly installed PDF Generator.
    It is rendering Xls documents fine.
    But for word (.doc) documents it is giving error ' Error 1011 The BMC request failed'

    Could you please help me?

    Regards,
    Mani

    DB:2.33:Problem Rendering Word Documents s7

    I still got the 'Error 1011 The BMC request failed' after I followed the instructions on the techdocs.

    I installed the PDFGenerator elements 7.2 using turkey installation. I tried to convert a word (.xml) document to pdf. I did the following three things:

    1. Used adminui to do the conversion, I could get the pdf result.
    2. Opened the word document on the same machine as the server installed, and used the Adobe Distiller to convert, I could get the pdf correctly.
    3. Used webservice to do the conversion, I got the 'Error 1011' for some of the documents.

    Below is errors I found in server.log file
    2007-01-25 14:44:51,968 INFO [org.jboss.system.server.Server] JBoss (MX MicroKernel) [3.2.5 (build: CVSTag=JBoss_3_2_5 date=200503111143)] Started in 2m:19s:859ms
    2007-01-25 14:44:51,968 INFO [org.jboss.web.tomcat.tc5.Tomcat5] Saw org.jboss.system.server.started notification, starting connectors
    2007-01-25 14:44:52,078 INFO [org.apache.coyote.http11.Http11Protocol] Starting Coyote HTTP/1.1 on http-0.0.0.0-8080
    2007-01-25 14:44:52,312 INFO [org.apache.jk.common.ChannelSocket] JK2: ajp13 listening on /0.0.0.0:8009
    2007-01-25 14:44:52,312 INFO [org.apache.jk.server.JkMain] Jk running ID=0 time=0/125 config=null
    2007-01-25 15:03:06,953 WARN [org.apache.axis.configuration.EngineConfigurationFactoryFinder] Factory org.jboss.net.axis.server.JMXEngineConfigurationFactory Ignored: missing required method: public static EngineConfigurationFactory newFactory(Object).
    2007-01-25 15:03:08,296 INFO [org.apache.xml.security.signature.Reference] Verification successful for URI "#bab433c97e297f2419e717fd5e253cb5"
    2007-01-25 15:03:09,156 INFO [com.adobe.ns.pdfgen.ws7.SOAPAttachmentHandler] Found attachments (reqMsg) : 1
    2007-01-25 15:03:09,406 INFO [com.adobe.native2pdf.internal.DequeueBean] Retry enabled for Native conversion
    2007-01-25 15:03:09,406 INFO [com.adobe.native2pdf.internal.AESEngineBean] AES_1001: Begin processing job 33f948-c48003-94b255-1a6097-148536-a98a33
    2007-01-25 15:03:10,000 INFO [com.adobe.service.ProcessResource] BMC505: Service WordConverterService: Starting native process with command line "C:\\Adobe\\LiveCycle\\jboss\\server\\all\\svcnative\\WordConverterService\\bin\\dll\\pdf gen.exe" PDF-WOec31e0003 -beginExecutable "C:\\j2sdk1.4.2_08\\jre\\bin\\javaw.exe" -endExecutable -Xmx20m -cp "C:/Adobe/LiveCycle/jboss/server/all/svcnative/WordConverterService/bin/aaes-idl-bmc.jar; C:/Adobe/LiveCycle/jboss/server/all/svcnative/WordConverterService/bin/aaes-jaxb.jar;C:/Ad obe/LiveCycle/jboss/server/all/svcnative/WordConverterService/bin/adobe-bslj.jar;C:/Adobe/ LiveCycle/jboss/server/all/svcnative/WordConverterService/bin/AdobeCSA.jar;C:/Adobe/LiveCy cle/jboss/server/all/svcnative/WordConverterService/bin/AdobeCSAUtils.jar;C:/Adobe/LiveCyc le/jboss/server/all/svcnative/WordConverterService/bin/appmon.jar;C:/Adobe/LiveCycle/jboss /server/all/svcnative/WordConverterService/bin/commonbmc.jar;C:/Adobe/LiveCycle/jboss/serv er/all/svcnative/WordConverterService/bin/jaxb-api.jar;C:/Adobe/LiveCycle/jboss/server/all /svcnative/WordConverterService/bin/jaxb-impl.jar;C:/Adobe/LiveCycle/jboss/server/all/svcn ative/WordConverterService/bin/jaxb-libs.jar;C:/Adobe/LiveCycle/jboss/server/all/svcnative /WordConverterService/bin/jniw2.9.5_pdfmapi1.0.jar;C:/Adobe/LiveCycle/jboss/server/all/svc native/WordConverterService/bin/jniw2.9.5_word8.1.jar;C:/Adobe/LiveCycle/jboss/server/all/ svcnative/WordConverterService/bin/jniwrap-2.9.6.241.jar;C:/Adobe/LiveCycle/jboss/server/a ll/svcnative/WordConverterService/bin/namespace.jar;C:/Adobe/LiveCycle/jboss/server/all/sv cnative/WordConverterService/bin/winpack.jar;C:/Adobe/LiveCycle/jboss/server/all/svcnative /WordConverterService/bin/WordConverterServer.jar;C:/Adobe/LiveCycle/jboss/server/all/svcn ative/ServicesNatives2/jars/adobe-bslj.jar;C:/Adobe/LiveCycle/jboss/server/all/svcnative/S ervicesNatives2/jars/jacorb.jar" com.adobe.native2pdf.bmc.WordConverterServer -IOR IOR:000000000000002249444C3A636F6D2F61646F62652F736572766963652F4D616E616765723A312E30000 00000000002000000000000006C000102000000000F3139322E3136382E34322E31323800000DC800000000001 34A426F73732F42522D312F010000000000000000000000020000000000000008000000004A414300000000010 000001C00000000000100010000000105010001000101090000000105010001000000010000002C00000000000 00001000000010000001C00000000000100010000000105010001000101090000000105010001 -AppServer jboss
    2007-01-25 15:03:10,140 INFO [STDOUT] Command line '"C:\j2sdk1.4.2_08\jre\bin\javaw.exe"'
    2007-01-25 15:03:16,046 INFO [STDOUT] myOwnProcesses found 2
    2007-01-25 15:03:19,265 INFO [STDOUT] com.adobe.native2pdf.bmc.ConvertWord starting run()
    2007-01-25 15:03:19,750 INFO [STDOUT] com.adobe.native2pdf.bmc.ConvertWord calling execute
    2007-01-25 15:03:19,796 INFO [STDOUT] Processing document 'C:\Documents and Settings\Administrator\Local Settings\Temp\pdfg-Administrator\33\f948-c48003-94b255-1a6097-148536-a98a33\testRobert.xm l'
    2007-01-25 15:03:27,859 INFO [STDOUT] COM PID appears to be 2620
    2007-01-25 15:03:29,656 INFO [STDOUT] Exception c0000005, at 07DCEF80
    Access violation: attempting to write memory at address 07DCEF80
    2007-01-25 15:03:29,656 INFO [STDOUT] Native function stack data: dcef8000,7,737700,0,30003,2080159,0,0,4122f28
    com.jniwrapper.FunctionExecutionException: c0000005
    at com.jniwrapper.Function.invokeCFunc(Native Method)
    at com.jniwrapper.FunctionCall.a(SourceFile:100)
    at com.jniwrapper.FunctionCall.call(SourceFile:31)
    at com.jniwrapper.Function.invoke(SourceFile:160)
    at com.jniwrapper.Function.invoke(SourceFile:196)
    at com.jniwrapper.win32.ui.Wnd.getAllWindows(SourceFile:1147)
    at com.adobe.appmon.AppMon.getAllWindows(AppMon.java:131
    2007-01-25 15:03:29,656 INFO [STDOUT] 6)
    at com.adobe.appmon.AppMon.processAllDialogs(AppMon.java:686)
    at com.adobe.appmon.AppMon.loopAllDialogs(AppMon.java:661)
    at com.adobe.appmon.AppMon.loopAppMon(AppMon.java:375)
    at com.adobe.appmon.AppMon.segueToLoop(AppMon.java:220)
    at com.adobe.appmon.AppMon.run(AppMon.java:190)
    at java.lang.Thread.run(Thread.java:534)
    2007-01-25 15:03:29,656 INFO [STDOUT] Running Word version 11.0
    2007-01-25 15:03:30,093 INFO [STDOUT] ConversionInterface returned status 0
    Got default parameter bits 1c00017
    ConversionInterface returned status 0
    Read-Back ConversionInterface returned status 0, bits 1c00017
    JobOptions from file pdfg Standard 33541
    2007-01-25 15:03:34,359 INFO [STDOUT] com.jniwrapper.win32.com.ComException: COM object method returns error code: 0x80004005; E_FAIL (Unspecified error)
    2007-01-25 15:03:34,359 INFO [STDOUT]
    at com.jniwrapper.win32.com.impl.IUnknownImpl.invokeStandardVirtualMethod(SourceFile:624)
    at com.adobe.native2pdf.internal.wrap.acrobat7.pdfmakerapilib.impl.IPDFMakerDriverImpl.openD ocument(IPDFMakerDriverImpl.java:75)
    at com.adobe.native2pdf.bmc.ConvertWord.convertViaPDFMaker(ConvertWord.java:168)
    at com.adobe.native2pdf.bmc.ConvertWord.execute(ConvertWord.java:66)
    at com.adobe.native2pdf.bmc.ConvertBase.run(ConvertBase.java:82)
    at java.lang.Thread.run(Thread.java:534)
    2007-01-25 15:03:34,546 INFO [STDOUT] Sleeping before oleUninitialize
    2007-01-25 15:03:35,546 INFO [STDOUT] Calling oleUninitialize
    com.adobe.native2pdf.bmc.ConvertWord shutdown JniWrapper
    2007-01-25 15:03:35,640 INFO [STDOUT] Calling getProcessIdsByNonDefaultWindowStation()
    2007-01-25 15:03:35,750 INFO [com.adobe.native2pdf.internal.AESEngineBean] AES_1002: Done processing job 33f948-c48003-94b255-1a6097-148536-a98a33
    2007-01-25 15:03:35,765 INFO [STDOUT] getProcessIdsByNonDefaultWindowStation() found 0
    2007-01-25 15:03:35,781 INFO [com.adobe.native2pdf.internal.DequeueBean] Message queued again into job queue
    2007-01-25 15:03:35,796 INFO [com.adobe.native2pdf.internal.AESEngineBean] AES_1001: Begin processing job 33f948-c48003-94b255-1a6097-148536-a98a33
    2007-01-25 15:03:36,187 INFO [STDOUT] com.adobe.native2pdf.bmc.ConvertWord starting run()
    com.adobe.native2pd

  • RELEVANCY SCORE 2.33

    DB:2.33:Xls Map Generation Failed dx


    am using Jdeveloper to create an ESB flow with soap service. I couldnt save the xls map between my rout service and soap service. The error is

    XLS map generation failed. Please use source to correct the problems.

    I ma using Jdeveloper 10.1.3.3

    Anyone has a clue?

    DB:2.33:Xls Map Generation Failed dx

    "When the XSLT Mapper encounters any elements in the XSLT document that cannot be found in the source or target schema, it is unable to process them and displays an
    Invalid Source Node Path error. XSL map generation fails. You can create and
    import a file that directs the XSLT Mapper to ignore and preserve these specific
    elements during XSLT parsing by selecting Preferences, then XSL Maps in the Tools main menu of Oracle JDeveloper."

    Please refer section
    Ignoring Elements in the XSLT Document
    http://download-uk.oracle.com/docs/cd/B31017_01/integrate.1013/b28211.pdf

  • RELEVANCY SCORE 2.33

    DB:2.33:Request Processing Failed (Xls 000009) kz



    Hi All,

    I am getting below error message in the dashboard.I am pulling the data from SQL server

    My process is:

    SQL Server --IDT-Query browser--Dashboards.

    Error Message:

    Request Processing Failed (XLS 000009)

    Interface Requested not found: RepositoryJob

    Thanks in advance

    DB:2.33:Request Processing Failed (Xls 000009) kz


    Try deleting any prompts in the query browser. You may be passing an invalid value to the query.

    Lee Lewis

  • RELEVANCY SCORE 2.33

    DB:2.33:Error : Cannot Access External Data , Xls : 000009 88



    Hi Everyone,

    There is an error am getting, while connecting to Qaaws, the screen shot is attached.

    I have changed the time zone in CMC but, it still prevails.

    Its urgent, quick solution would be helpful.

    Thanks in advance,

    Sara

    DB:2.33:Error : Cannot Access External Data , Xls : 000009 88


    Hi Venkat,

    It was some authorization issue.

    We had to go for another method.

    Regards,

    Sara

  • RELEVANCY SCORE 2.32

    DB:2.32:Cannot Activate Using Nwdi kd



    Hi

    I am getting the following error when attempting to Activate a task in NWDI

    ===== Processing ===== started at 2009-01-20 10:15:42.243 GMT Change request state from PROCESSING to FAILED Error! The following problem(s) occurred during request processing: Error! The following error occurred during request processing:The CBS service property BUILD_TOOL_JDK_HOME is incorrectly set. The given path: C:\j2sdk1.4.2_14x64 does not exist. CBS cannot perform the build. REQUEST PROCESSING finished at 2009-01-20 10:15:42.258 GMT and took 59 s 671 ms

    Basis have confirmed the JDK path is configured in CBS through Visual Admin. Any ideas. I am moving Local DC's to NWDI and did manage to get one Activated. I followed the steps in this thread:

    Web Dynpro Java

    thanks

    Damien

    DB:2.32:Cannot Activate Using Nwdi kd


    Basis team sorted this issue .. sorry but they didnt give me feedback on how .. but I know they did raise the question to SAP !

  • RELEVANCY SCORE 2.32

    DB:2.32:Failed To Synchronize 19



    Hello all,

    i have one dirty DC in my SC i have created. When i try to build it using the CBS im getting this error

    Build number assigned: 1649
    Change request state from QUEUED to PROCESSING
    BUILD request in Build Space "XXX_Vacation_D" at Node ID: 7,411,650
    [id: 712; parentID: 0; type: 2]

    REQUEST PROCESSING started at 2006-01-12 09:13:43.677 GMT

    ===== Pre-Processing =====

    Calculate all combinations of components and variants to be built...
    "xxx.xxxx/xxxxx/vac_web" variant "default"

    Prepare build environment in the file system... started at 2006-01-12 09:13:43.911 GMT
    Synchronize development configuration... finished at 2006-01-12 09:13:43.911 GMT and took 0 ms
    Synchronize component definitions... finished at 2006-01-12 09:13:44.380 GMT and took 469 ms
    Synchronize sources...
    Prepare build environment in the file system... finished at 2006-01-12 09:13:44.614 GMT and took 703 ms
    ===== Pre-Processing ===== finished at 2006-01-12 09:13:44.614 GMT and took 922 ms
    Change request state from PROCESSING to FAILED

    ERROR! The following problem(s) occurred during request processing:

    ERROR! The following error occurred during request processing:Failed to synchronize D:usrsapXXXDVEBMGS00j2eeclusterserver0tempCBS9.CACHE33DCsxxxxxxxxxxvac_web_comp/src/packages

    REQUEST PROCESSING finished at 2006-01-12 09:13:44.614 GMT and took 937 ms

    DB:2.32:Failed To Synchronize 19


    Just some ideas:

    - Failing DTR Connection?

    - Insufficient disk space?

  • RELEVANCY SCORE 2.32

    DB:2.32:Unstable Dashboard With Universe As Source c9



    Hi,

    I am on Dashboard 4.1 SP2.

    I have created a Universe that connects to BPC 10 MS in IDT. And then i created a Dashboard with multiple "Query Prompt Selector" that refers to the Universe above as data source.

    In "Preview" mode, i find the connection highly unstable, i.e. sometimes the dimension members won't load into the "Query Prompt Selector", and sometimes after the dimension members are successfully selected, data retrieval fails (it keeps on processing). And eventually, i'll get the " Request processing failed (XLS 000009)" message."

    I have to restart the server that holds both the SQL db and CMS to get things working on the client side (i.e. Dashboard) all the time.

    Any idea why this is not working, gurus?

    Thanks,

    LC

    DB:2.32:Unstable Dashboard With Universe As Source c9


    Hi,

    I am on Dashboard 4.1 SP2.

    I have created a Universe that connects to BPC 10 MS in IDT. And then i created a Dashboard with multiple "Query Prompt Selector" that refers to the Universe above as data source.

    In "Preview" mode, i find the connection highly unstable, i.e. sometimes the dimension members won't load into the "Query Prompt Selector", and sometimes after the dimension members are successfully selected, data retrieval fails (it keeps on processing). And eventually, i'll get the " Request processing failed (XLS 000009)" message."

    I have to restart the server that holds both the SQL db and CMS to get things working on the client side (i.e. Dashboard) all the time.

    Any idea why this is not working, gurus?

    Thanks,

    LC

  • RELEVANCY SCORE 2.32

    DB:2.32:One Or More Post-Processing Actions Failed mf


    Hi,

    We are facing following error with OPP, concurrent request completed with warnings.

    We have changed OPP max process to 20 and increased below profile options values.

    Concurrent:OPP Response Timeout :5000
    Concurrent:OPP Process Timeout : 3000

    ---------------------------------------------------------------------------
    XXHAI Custom Application: Version : UNKNOWN

    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.

    HAI_APNTLTR_TRAINEES module: HAI Appointment Letter for trainees
    ---------------------------------------------------------------------------

    Current system time is 03-APR-2013 08:39:26

    ---------------------------------------------------------------------------

    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------

    Arguments
    ------------
    P_EMP_NUM='155'
    ------------

    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing

    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    American_America.US7ASCII

    '.,'

    Enter Password:

    Report Builder: Release 10.1.2.3.0 - Production on Wed Apr 3 08:39:32 2013

    Copyright (c) 1982, 2005, Oracle. All rights reserved.

    ---------------------------------------------------------------------------
    Executing request completion options...

    Output file size:
    569

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 876220 on node HAIDCERPUAT01 at 03-APR-2013 08:39:34.
    Post-processing of request 876220 failed at 03-APR-2013 08:39:36 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    ------------- 2) PRINT -------------
    Not printing the output of this request because post-processing failed.
    --------------------------------------

    Finished executing request completion options.

    ---------------------------------------------------------------------------
    Concurrent request completed
    Current system time is 03-APR-2013 08:39:36

    ---------------------------------------------------------------------------

    Can any one suggest how this issue will resolve.

    Regards,
    Amarnath

    DB:2.32:One Or More Post-Processing Actions Failed mf

    Hi;

    What is EBS version? What Consult the OPP service log says?

    Regard
    Helios

  • RELEVANCY SCORE 2.32

    DB:2.32:Unable To Create Pdf zj


    Hello,
    We have an environment eBS 11.5.10 CU2 with XML P 5.0. We have developed an invoice like report that works great in Template Builder but when we run it i eBS we get the following error:

    From the log:
    Executing request completion options...

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 9156190 on node XXXX at 19-JAN-2006 20:45:07.
    Post-processing of request 9156190 failed at 19-JAN-2006 20:45:07 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    From the OPP log:
    [1/19/06 8:45:07 PM] [OPPServiceThread0] Post-processing request 9156190.
    [1/19/06 8:45:07 PM] [214073:RT9156190] Executing post-processing actions for request 9156190.
    [1/19/06 8:45:07 PM] [214073:RT9156190] Starting XML Publisher post-processing action.
    [1/19/06 8:45:07 PM] [214073:RT9156190]
    Template code: XXAR078_DET
    Template app: XXAR
    Language: en
    Territory: US
    Output type: PDF
    [1/19/06 8:45:07 PM] [UNEXPECTED] [214073:RT9156190] oracle.apps.fnd.cp.opp.PostProcessorException: XML Publisher output file not created
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:260)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:153)

    [1/19/06 8:45:07 PM] [214073:RT9156190] Completed post-processing actions for request 9156190.

    Does anyone understand why it fails? Any help would be greatly appreciated.

    Regards,
    Daniel

    DB:2.32:Unable To Create Pdf zj

    All,
    Am a new visitor to this forum, as I was asked to work/change few XML publisher reports. Happy to see lots of happening/reaserch here.
    By looking at the questions/answers, many users mastered in XML Publisher it seems.
    Tim,
    Thank you for your guide lines to find out the OPP log in one of your replies. Through the log, I have got some hints about the error message, which was hurting me oflate.
    To speak about background of the issue - I am working now on a big report with PDF output, with heavy calculations and rich contents etc. Today , all of a sudden report stopped functioning properly and completing with warnings. After some strugle , was able to find the reason. - I used few page breaks without , declaring them at all. ;)

    And for the topic, "poor documentation and example selection" - I have one incident.
    If you could remember one example of column hiding from the XML Publisher User guide, it exactly suits my requirement. After couple of reserches in and out, I implemented that stuff into my reports. When I notice the report output carefully, the table size is coming down, when it hides a column. When it don't table size is full of the page and look very nice.
    Finally my user didn't accept it, as it look awkward with full table one time and half table s,ome other time.
    Then I approached oracle metalink, by raising a SR for the fix. They replied me saying, customization is involved in this and we don't support. :(

    I had no other choice, but scrapped the entire code and hard work.

    Regards,
    Chandu Reddy

  • RELEVANCY SCORE 2.32

    DB:2.32:Xml Concurrent Program Completing Warning With Op Not Generated.. xj


    Hi All,

    I have developed a XML report using BI Publisher desktop it is generating output preview in template but concurrent program is completing warning with the below log message.

    Data is generated with the XML tags but failing in post processor also this is not happening for all the reports when i modifed a template and uploaded i am getting this issue. I am suspecting whether this might me a compatibility issue...? Please suggest.

    Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing

    APPLLCSP Environment Variable set to :

    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_SAUDI ARABIA.AL32UTF8

    '.,'

    Enter Password:
    REP-0004: Warning: Unable to open user preference file.

    Report Builder: Release 10.1.2.3.0 - Production on Tue Jan 15 18:13:26 2013

    Copyright (c) 1982, 2005, Oracle. All rights reserved.

    ---------------------------------------------------------------------------
    Start of log messages from FND_FILE
    ---------------------------------------------------------------------------
    ---------------------------------------------------------------------------
    End of log messages from FND_FILE
    ---------------------------------------------------------------------------

    ---------------------------------------------------------------------------
    Executing request completion options...

    Output file size:
    482

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 2422892 on node TAISIRQW1 at 15-JAN-2013 18:13:28.
    Post-processing of request 2422892 failed at 15-JAN-2013 18:13:28 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    ------------- 2) PRINT -------------
    Not printing the output of this request because post-processing failed.
    --------------------------------------

    Finished executing request completion options.

    ---------------------------------------------------------------------------
    Concurrent request completed
    Current system time is 15-JAN-2013 18:13:29

    ---------------------------------------------------------------------------

    DB:2.32:Xml Concurrent Program Completing Warning With Op Not Generated.. xj

    Please post the details of the application release, database version and OS.

    Beginning post-processing of request 2422892 on node TAISIRQW1 at 15-JAN-2013 18:13:28.
    Post-processing of request 2422892 failed at 15-JAN-2013 18:13:28 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for detailsThis is a generic error, so please check the OPP log file for details about the error -- Troubleshooting Oracle XML Publisher For The Oracle E-Business Suite [ID 364547.1]

    Thanks,
    Hussein

  • RELEVANCY SCORE 2.32

    DB:2.32:Win Pvc 6.0 Beta Backup Failed cs





    C:\vzbackup 1000
    Starting backup operation for node test...
    * Operation with the Container CT1000 is started
    * Backing up environment CT1000 locally
    * Checking parameters
    * Creating backup 7fe15d26-a562-413f-879f-ffd49a124d69/20130805095148
    * Adjusting backup type (full)
    * Backup storage: receiving backup file
    * Backing up private area
    * Backing up whole drive C:
    * Operation with the Container CT1000 is finished with errors: Processing of the request was incomplete..
    Backup operation for node test failed: Processing of the request was incomplete.
    Backup failed

    DB:2.32:Win Pvc 6.0 Beta Backup Failed cs




    backup is always a difficult problem. A lot of people get stuck here

  • RELEVANCY SCORE 2.32

    DB:2.32:Login As Server Admin And An Error Occurred While Processing This Request. ck


    This error is shown while logging to the SQL server master db with the admin account:

    servername.database.windows.net Operation Failed
    An error has occurred during the selected operation. Details:
    An error occurred while processing this request.
    What does it mean? The lack of detail makes the error difficult to act on.

    Senior Soft. Dev. Eng. | Microsoft IT | Microsoft Corporation

    DB:2.32:Login As Server Admin And An Error Occurred While Processing This Request. ck

    It looks like the website was just temporarily down yesterday when I tried it. It is working now.Senior Soft. Dev. Eng. | Microsoft IT | Microsoft Corporation

  • RELEVANCY SCORE 2.31

    DB:2.31:Processes And Buttons c7


    Hello all,
    My scenario is this
    I have two buttons which are supposed to call two different processes and redirect to two different pages

    button 1 calling process 1 and branche to page 11
    button 2 calling process 2 and branch to page 15

    I have two buttons , two processes and two branches.
    button 1: name submit
    optional url:- no target specified
    button 2: name publish
    optional url:- no target specifies..

    process 1:
    conditional processing:
    request=submit
    when button pressed = submit

    process 2:
    conditional processing:
    request=publish
    when button pressed = publish

    branch1
    redirect to 11
    conditional processing:
    request=submit
    when button pressed = submit

    branch2
    redirect to 15
    conditional processing:
    request=publish
    when button pressed = publish

    Now the flow involving process 1 works fine and that involving process 2 failed and am sure that the second process isnt doing wat it is supposed to to..
    Where am I going wrong..?

    DB:2.31:Processes And Buttons c7

    I cannot see your application and your words give very little information. Put an example on htmldb.oracle.com and questions can be answered.

    Scott

  • RELEVANCY SCORE 2.31

    DB:2.31:Dso Activation Failed kd



    Hi experts,

    The data activation of a dso is failing with the error Activation of M records failed. When checked in sm37 for the repective job the error is as follows;

    =======================

    Parallel processes (for Activation); 000009

    Timeout for parallel process (for Activation): 000300

    Package size (for Activation): 020000

    Task handling (for Activation): Backgr Process

    Server group (for Activation): No Server Group Configured

    Parallel processes (for SID Gener.); 000003

    Timeout for parallel process (for SID Gener.): 000600

    Package size (for SID Gener.): 020000

    Task handling (for SID Gener.): Backgr Process

    Server group (for SID Gener.): No Server Group Configured

    Activation started (process is running under user BASIS)

    All data fields updated in mode "overwrite"

    Process 000039 returned with errors

    Background process BCTL_D5KKE8JR8Z7LVRPACWHAKJLFF terminated due to missing confirmation

    Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0

    Log for activation request ODSR_D5KKE8JR8Z6U75DJ1D1OI475N data package 000001...000001

    Errors occured when carrying out activation

    Analyze errors and activate again, if necessary

    Activation of M records from DataStore object Zxx_yy terminated

    Activation is running: Data target Zxx_yy, from 5.549 to 5.549

    Overlapping check with archived data areas for InfoProvider Zxx_yy

    Data to be activated successfully checked against archiving objects

    Parallel processes (for Activation); 000009

    Timeout for parallel process (for Activation): 000300

    Package size (for Activation): 020000

    Task handling (for Activation): Backgr Process

    Server group (for Activation): No Server Group Configured

    Parallel processes (for SID Gener.); 000003

    Timeout for parallel process (for SID Gener.): 000600

    Package size (for SID Gener.): 020000

    Task handling (for SID Gener.): Backgr Process

    Server group (for SID Gener.): No Server Group Configured

    Activation started (process is running under user BASIS)

    All data fields updated in mode "overwrite"

    Process 000039 returned with errors

    Background process BCTL_D5KKE8JR8Z7LVRPACWHAKJLFF terminated due to missing confirmation

    Data pkgs 000001; Added records 1-; Changed records 0; Deleted records 0

    Log for activation request ODSR_D5KKE8JR8Z6U75DJ1D1OI475N data package 000001...000001

    Errors occured when carrying out activation

    Analyze errors and activate again, if necessary

    Activation of M records from DataStore object Zxx_yy terminated

    Report RSODSACT1 ended with errors

    Job cancelled after system exception ERROR_MESSAGE

    ========================

    How to solve this error and do i need to maintain any settings for activation.

    Regards,

    Nishuv.

    DB:2.31:Dso Activation Failed kd


    Go to SM37..

    select your job..

    Go to Job Details

    there you will find an ID number...

    copy this ID number and go to SM37

    and check whether that ID is in waiting list...

    if it is there then try to retrigger it

  • RELEVANCY SCORE 2.31

    DB:2.31:Subsequent Processing Failing zm



    Hi

    Daily delta upload and on full upload is taking place in the ODS. But request is failing because of subsequent processing not taking place. Both the request are lying in the activation queue but not updated into the ODS. Daily morning we have to activate it manually.

    Today full upload is failed with red status... error msg shows subsequent processing failed..In status following msg is displayed.

    bError message when processing in the Business Warehouse

    Diagnosis

    An error occurred in the SAP BW when processing the data. The error is

    documented in an error message.

    System response

    The error message(s) was/were sent by:

    Second step in the update

    Second step in the update/b

    Added and transferred records are same 46736.

    Now how to go about it.

    Regards

    Rak

    DB:2.31:Subsequent Processing Failing zm


    Hi Rakesh,

    Check the activation log and let us know. Also goto the "detyails" tab of the monitor of the request and post the details here.

    Bye

    Dinesh

  • RELEVANCY SCORE 2.31

    DB:2.31:Issue With The Report Oracle.Apps.Xdo.Xdoexception:Error Creating Lock File ad


    I am getting an error while submitting the XML publisher report in Betsy N0 instance.
    Issue

    Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
    Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
    Output :- Blank Report
    XML file :- XML file generated without any error
    Output process:-

    [12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
    [12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
    [12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
    [12/23/11 5:49:30 AM] [1213640:RT145481923]
    Template code: XXWIP_WO_VLVS
    Template app: XXWIP
    Language: en
    Territory: US
    Output type: PDF
    oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

    [12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

    DB:2.31:Issue With The Report Oracle.Apps.Xdo.Xdoexception:Error Creating Lock File ad

    I am getting an error while submitting the XML publisher report in Betsy N0 instance.
    Issue

    Log :- Beginning post-processing of request 145458120 on node BETSYN0DB1 at 22-DEC-2011 05:28:26.
    Post-processing of request 145458120 failed at 22-DEC-2011 05:28:28 with the error message: One or more post-processing actions failed. Consult the OPP service log for details
    Output :- Blank Report
    XML file :- XML file generated without any error
    Output process:-

    [12/23/11 4:28:10 AM] [1213640:RT145480622] Completed post-processing actions for request 145480622.
    [12/23/11 5:16:01 AM] [OPPServiceThread1] Post-processing request 145481427.
    [12/23/11 5:49:30 AM] [OPPServiceThread1] Post-processing request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Executing post-processing actions for request 145481923.
    [12/23/11 5:49:30 AM] [1213640:RT145481923] Starting XML Publisher post-processing action.
    [12/23/11 5:49:30 AM] [1213640:RT145481923]
    Template code: XXWIP_WO_VLVS
    Template app: XXWIP
    Language: en
    Territory: US
    Output type: PDF
    oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [12/23/11 5:49:31 AM] [UNEXPECTED] [1213640:RT145481923] oracle.apps.xdo.XDOException: Error creating lock file
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFromDB(FontCacheManager.java:320)
    at oracle.apps.xdo.oa.util.FontCacheManager.getFontFilePath(FontCacheManager.java:198)
    at oracle.apps.xdo.oa.util.FontHelper.createFontProperties(FontHelper.java:432)
    at oracle.apps.xdo.oa.util.ConfigHelper.getFontProperties(ConfigHelper.java:166)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.runProcessTemplate(TemplateHelper.java:5824)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3459)
    at oracle.apps.xdo.oa.schema.server.TemplateHelper.processTemplate(TemplateHelper.java:3548)
    at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:247)
    at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)

    [12/23/11 5:49:31 AM] [1213640:RT145481923] Completed post-processing actions for request 145481923.

  • RELEVANCY SCORE 2.31

    DB:2.31:Error While Install Certificate z3



    Hi,

    i receive an error while uploading an certificate.

    HTTP Status 500 - Request processing failed; nested exception is org.springframework.web.multipart.MaxUploadSizeExceededException: Maximum upload size of 10240 bytes exceeded; nested exception is org.apache.commons.fileupload.FileUploadBase$SizeLimitExceededException: the request was rejected because its size (10401) exceeds the configured maximum (10240)

    Does someone know how to change the upload size?

    Thanks

    Frank

  • RELEVANCY SCORE 2.31

    DB:2.31:File To Jdbc Error z3



    I got following error while doing FILE to JDBC scenario.

    Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'example' (structure 'StatementName'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'example'.

    Error processing request in sax parser: Error when executing statement for table/stored proc. 'example' (structure 'StatementName'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'example'.

    Error while parsing or executing XML-SQL document: Error processing request in sax parser: Error when executing statement for table/stored proc. 'example' (structure 'StatementName'): com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'example'.

    My receiver structure is.....

    ?xml version="1.0" encoding="UTF-8" ?
    - ns0:mt_jdbcreceiver xmlns:ns0="urn:filetojdbc"

    DB:2.31:File To Jdbc Error z3


    Ashok,

    Check with your DB team whether the table 'example' exsist or not also.

    Regards

    Praveen

  • RELEVANCY SCORE 2.31

    DB:2.31:Re: Processing Of Multipart/Form-Data Request Failed. Connection Reset 9m


    Tengo este mismo problema. Habra alguna solucin
    Ayuda help!!!!!!!
    Alguien habra encontrado la solucion
    saludos

    Edited by: mmejia_mmm on Jan 28, 2009 10:30 AM

  • RELEVANCY SCORE 2.31

    DB:2.31:Dashboard Based On External Excel File dm



    Hi!

    I'm going to create new dashboard based on external excel file. I think the proper way is to create a universe based on ODBC datasource. But for some reason I can't create query in dashboard: in "Add query" after selecting my universe error XLS 000009 occurs.

    I've tried both Excel 2010 and Excel 2003 file formats without success. With Excel 2010 I see message (sorry for russian)

    With Excel 2003:

    1. Any suggestions for solving this problem?

    2. Any other approaches for externa Excel-sources?

    DB:2.31:Dashboard Based On External Excel File dm


    Hi Yury,

    First of all MS access database is not supported if you want to create Dashboard based on Universe directly using query browser.

    Relational Databases like MS Sql or MySql,Oracle are supported for this.

    Create 2 DSNs one 32 bit and one 64 bit both of the same name using ODBC drivers.Make sure that these two dsn should be of same name pointing to your database.

    Now create a UNX universe using IDT Information design tool.

    create a query in Dashboard using query browser

    Regards,

    Amit

  • RELEVANCY SCORE 2.30

    DB:2.30:Another Xls 00009:"Interface Not Found" 9a


    have this error since today. What happen?

    "Error de procesamiento de solicitud. (XLS 000009) [] lt;com.businessobjects.dsl.commons.exception.NestedException: Interface requested not found : RepositoryJobgt;"

    This error appear in the dashboard of Xcelsius, but, second later, can make the query and fill the graphs and tables.

    I have not modified anything since yesterday. And yesterday, and today morning, It was good.

    DB:2.30:Another Xls 00009:"Interface Not Found" 9a

    have this error since today. What happen?

    "Error de procesamiento de solicitud. (XLS 000009) [] lt;com.businessobjects.dsl.commons.exception.NestedException: Interface requested not found : RepositoryJobgt;"

    This error appear in the dashboard of Xcelsius, but, second later, can make the query and fill the graphs and tables.

    I have not modified anything since yesterday. And yesterday, and today morning, It was good.

  • RELEVANCY SCORE 2.30

    DB:2.30:Instead Of Getting Pdf Got Xml Output Bi Publisher Report 1c


    Hi ,

    While i run the concurrent request i got the below :

    ------------------------------------------------------------------------
    Executing request completion options...

    Output file size:
    335

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 3715769 on node CORPT228V at 14-SEP-2012 07:50:11.
    Post-processing of request 3715769 failed at 14-SEP-2012 07:50:11 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    --------------------------------------

    ------------- 2) PRINT -------------
    Not printing the output of this request because post-processing failed.
    --------------------------------------

    instead of getting pdf output i got xml o/p....

    thanks in advance....

    Regards,
    Doss

    DB:2.30:Instead Of Getting Pdf Got Xml Output Bi Publisher Report 1c

    In BI Publisher some times when there is an issue with the RTF Template It creates a zero kb output file. I experienced similar issue.

    Export your XML output to your local computer and download the RTF template and test it locally. There could be some issue with the RTF Template.

    Try this out

    Rgds
    Chundi

  • RELEVANCY SCORE 2.30

    DB:2.30:Account Analysis Report Completed With Warning mj


    Hi All,

    I am unable get the output for Account Analysis Report.Can Any one help me onthis.

    log file message:

    ---------------------------------------------------------------------------
    Executing request completion options...

    Output file size:
    339799830

    ------------- 1) PUBLISH -------------
    Beginning post-processing of request 1905991 on node APP1DEV at 30-JAN-2012 21:52:13.
    Post-processing of request 1905991 failed at 30-JAN-2012 21:59:13 with the error message:
    The concurrent manager has timed out waiting for the Output Post-processor to finish this request.

    Check that there are enough Output Post-processor service processes running.
    More information may be found in the service process logfile.
    --------------------------------------

    ------------- 2) PRINT -------------
    Not printing the output of this request because post-processing failed.

    Thanks
    Ramaiah

    DB:2.30:Account Analysis Report Completed With Warning mj

    Please try increasing the memory size for this report to 2GB and this should work fine.

  • RELEVANCY SCORE 2.30

    DB:2.30:Issue In Processing .Xls File In Informatica? 8c



    Hi All,

    I am working with .xls file with multiple tab as source in informatica and i followed the process document in KB article present in portal.

    I am able to import the tab from excel and created the mapping and ODBc connection but while executing the below error:

    RR_4036

    Message: Error connecting to database [

    [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified

    Database driver error...

    Function Name : Connect

    Database driver error...

    Function Name : Connect

    Database Error: Failed to connect to database using user [pmnulluser] and connection string [Excel_Sysdsn].].

    I also copied the microsoft excel driver to infa_home/ODBC5.2 path and still facing the issue.

    If any one has any experience on this issue please suggest me. Also is it mandatory to install microsoft office or excel in informatica server?

    Thanks,
    Suman

    DB:2.30:Issue In Processing .Xls File In Informatica? 8c


    Hi Suman,

    Follow these steps

    1) In Excel select the range and define and name it.

    2) Create a ODBC in system dsn and select the excel file.

    3) In Designer Import the file from relational database and select the odbc created before.

    4) In workflow manager create a ODBC connection

    Here you need to be carefull

    user name: Excel file name

    Passwd: any value like 'a'

    Conn String: give the string name which was

    given while creating xls odbc connection.

    5) Edit session and select the source as odbc created in 4th step.

    I hope this will solve ur problem, still its not resolved reply me.

    Please go through the below link.

    http://datawarehouse.ittoolbox.com/groups/technical-functional/informatica-l/using-excel-file-as-source-in-informatica-powercenter-4603502

    https://community.informatica.com/message/101179

    Thanks RegardsKasireddy+966545281845

  • RELEVANCY SCORE 2.30

    DB:2.30:Error When Generating The Xls Report sp


    Hi

    i have submit request srs package concurrent program to produce xls report .

    error in xls

    XML ERROR in Worksheet Setting
    REASON:Bad Value
    FILE:D:\Users\lg186\Desktop\Testing\XXMRP0472_Work_Order_Report__4_120712_7.xls
    GROUP:Worksheet
    TAG:Table
    ATTRIB:ExpandedRowCount
    VALUE:107

    please help me
    thanks in advance

    DB:2.30:Error When Generating The Xls Report sp


    REASON: Bad Value

    so
    check your data before put it in cell

  • RELEVANCY SCORE 2.30

    DB:2.30:Request Proprocessing Failed. (Xls 000009) You Do Not Have Data Access Rights For The Connection. 8f



    Hello,

    I have created a universe UNX on top of a sql table. and i used this UNX via query browser to create a dahsboard. when i run this dashboard with "administrator" the dashboard runs but when i run with any other user it shows the below error. I have checked the connections user security and the i have given "full rights" to the user group and also the universe user security has "full rights" but still i get this error. How do i solve this issue. Couldnt find where the authorization is missing. Please help

    DB:2.30:Request Proprocessing Failed. (Xls 000009) You Do Not Have Data Access Rights For The Connection. 8f


    Hello,

    You also need to check the access to the connections. Go to CMC -- Connections and check if you have the required access.

    Regards,

    Shwetha

  • RELEVANCY SCORE 2.30

    DB:2.30:Export To Excel Error Message Means What? k1



    Can someone please explain what the issue here might be?

    (What in the world is _IMEX_?)

    proc export data=nicholas._21603_

    outfile= "c:\downloads\21603.xls"

    dbms=excel

    label

    replace;

    run;

    NOTE: File "c:\downloads\21603.xls" will be created if the export process succeeds.

    ERROR: Execute: Unable to insert row

    WARNING: File deletion failed for _IMEX_._21603_.DATA.

    ERROR: Export unsuccessful.

    NOTE: The SAS System stopped processing this step because of errors.

    DB:2.30:Export To Excel Error Message Means What? k1


    Here's the code that worked, for both exporting and then importing back.

    This is using Windows XP SR3, SAS 9.3 M1, Excel 2010.

    proc export data=nicholas._21603_

    outfile= 'c:\downloads\21603.xlsx'

    dbms=xlsx /* or can use dbms=excel2007, but it's a bit slower */

    label

    replace;

    run;

    proc import

    datafile='c:\downloads\21603.xlsx'

    out=nicholas._21603_swapped

    dbms=excel2007 /* dbms= xlsx fails with just error messages in import */

    replace;

    getnames=yes;

    mixed=no;

    scantext=yes;

    usedate=yes;

    scantime=yes;

    run;

  • RELEVANCY SCORE 2.30

    DB:2.30:Application Error Occurred During Request Processing Webdynpro za



    Hi all,

    I have developed one sample web dynpro application( welcome). when was deploying the welcome application on the j2ee engine using NWDS. It is giving the fallowing error i.e.

    500 Internal Server Error

    Application error occurred during request processing.

    Details: com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to create deployable object 'local/Welcome' since it is not of a Web Dynpro object.

    Exception id: [02004C4F4F50005C0000000A0000091800042D3A2DDDDEDB]

    Please help me how to deploy this application successfully.

    Regards,

    Deviprasad.

    DB:2.30:Application Error Occurred During Request Processing Webdynpro za


    Previously i have deployed this application on WAS-sp9. and it is not working.

    It is working fine with WAS sp19.( i have used the NWDS-sp19) .

    Problem solved.

    thanks and regards,

    Deviprasad.

  • RELEVANCY SCORE 2.30

    DB:2.30:Post-Processing xc


    we are getting below error in PROD

    Post-processing of request 30998012 failed at 11-JAN-2011 12:45:38 with the error message:
    The Output Post-processor is running but has not picked up this request.
    No further attempts will be made to post-process this request, and the request will be marked
    with Warning status.
    Setting the profile option Concurrent: OPP Response Timeout to a higher value may be necessary.

    Please suggest

    DB:2.30:Post-Processing xc

    Hi;

    What is your EBS and OS?

    Please check below notes:
    Output Post Processor (OPP) Log Contains Error "java.lang.OutOfMemoryError: Java heap space" Error [ID 1268217.1]
    OPP Service Log for the 'Create Accounting' process shows 'java.lang.OutOfMemoryError: Java heap space ' Error [ID 1129283.1]

    Regard
    Helios

  • RELEVANCY SCORE 2.30

    DB:2.30:Request Processing Failed ??? 3k



    Dear all,

    I am facing the error. "Request processing failed (XLS 000009). I have created many queries in bex and i am accessing the queries in dashboard designer through query browser. But the query's which i have created on top of custom cube which is not accessible. Please find the attached screenshots.

    Kindly help me on this.

    Regards,

    Suman T

  • RELEVANCY SCORE 2.30

    DB:2.30:Sharepoint 2013 Search - .Doc/.Xls Files Are Not Visible When Searching 3f


    Searching for .docx or .xlsx files is working. But when I search for a .doc file, it doesn't appear in the results. There is a PDF in the same directory and this file is visible when searching so its not a location problem. In the managed file types, .doc/.xls
    types are there. I looked into the crawl logs, and there are many errors: one for each .doc/.xls file. The errors are all the same:
    The content processing pipeline failed to process the item. ( Error parsing document 'http://mypath/myfile.xls'.It was not possible to acquire a worker. Proxy '1' failed to acquire worker. Sandbox worker pool is closed.; )

    DB:2.30:Sharepoint 2013 Search - .Doc/.Xls Files Are Not Visible When Searching 3f

    Hi,
    Anyone found a solution for this issue?
    No issues with docx/xlsx/pdf files but crawl log shows below errors for xls/doc files.

    Error:
    The content processing pipeline failed to process the item. ( Error parsing document 'http://site/library/document1.xls'. It was not possible to acquire a worker. Proxy '116' failed to acquire worker. Sandbox worker pool is closed.;
    Thank You.
    RK

    Thanks

  • RELEVANCY SCORE 2.30

    DB:2.30:Query Browser Prompt Selection Odd Functioning dd


    Hi All,I have a query browser connectivity with a prompt, i have connected this prompt to an excel sheet. The selector(prompt i/p), has two formats one is a number say some 38491, and the other in the name of a state. Now when i run the query i get the following error,Request processing failed. (XLS 000009) Request processing failed. (XLS 000009) [] lt;com.businessobjects.semanticlayer.qt.QTException: Query script generation failed. See your BusinessObjects administrator. {0} (WIS 00013)gt;this occurs only when I pass the number but when i pass the Text format (name of state) it works fine and the error does not pop out, can anyone point out what problem this is. The number selection (38491) passes as a text only, i even tried passing it alone and still does not work. I appreciate any helps or tips,Thanks,Fazith

    DB:2.30:Query Browser Prompt Selection Odd Functioning dd

    Hi Mohammad,i think that you are trying to pass the Key value to BW query.if it's the case so i can confirm that it's a bug, ADAPT01693215.for more infotmation please check the SAP KBA 1877138 - Error XLS 000009 observed when trying to pass back "Key Values" to BW query from Dashboard. Best regards,Mohamed AISSA.

  • RELEVANCY SCORE 2.30

    DB:2.30:Concurrent Program Ending In Warning 9d


    Hi All,

    I ran a concurrent program to get the XML Publisher report.It ended up in warning.
    Can anyone help me in resolving the issue?

    Executing request completion options...

    +------------- 1) PUBLISH -------------+
    Beginning post-processing of request 3437429 on node G2C-IDEV-02 at 28-OCT-2008 23:08:56.
    Post-processing of request 3437429 failed at 28-OCT-2008 23:08:58 with the error message:
    One or more post-processing actions failed. Consult the OPP service log for details.
    +--------------------------------------+

    +------------- 2) PRINT -------------+
    Not printing the output of this request because post-processing failed.
    +--------------------------------------+

    DB:2.30:Concurrent Program Ending In Warning 9d

    Hi,

    check XML file is generated u can check this using Diagnostic-------View XML in SRS Window if xml data is generated then check the starting xml root and ending xml rot is same. if both r same then problem is with template.

    Just check it reply.

    Thanks
    Rajesh