• RELEVANCY SCORE 5.84

    DB:5.84:Showing System Bootstrap Version In Rme z1





    Is there a way to view the system bootstrap version, on my 2948G's, within RME??

    Thank-you in advance.

    DB:5.84:Showing System Bootstrap Version In Rme z1


    You can use the Detailed Device Report in RME, but it does not list specifically the System BootStrap vesion since, it normally uses sysDescr object to poll that info which does not include bootstrap vesion. Also take a look at CSCdu43510

  • RELEVANCY SCORE 3.14

    DB:3.14:No Devices Showing In Rme Inventory 81





    While trying to sync the archive and trying to update configs, I noticed that no devices were showing in the RMEversion tree. Running RMW version 4.3.1. Enclosed is RME homepage screen capture.

    DB:3.14:No Devices Showing In Rme Inventory 81


    Hi,

    With the available description assuming Windows, I'd try running a 'netstat -anob' looking for the owner of port TCP 47001. It should return "cwjava" If instead you see "system" then determine if the Windows Remote Management service is running. If it is, end it and restart the Daemon Manager.

    If that does not take care of it then let us know:

    - If the hostname changed?

    - When the last time it worked?

    - Are you integrated with ACS?

    - Is anything else not working as expected?

    Regards.

  • RELEVANCY SCORE 3.10

    DB:3.10:Lms 3.1 Rme Device Shows Up Twice df





    I have a Cisco CSS 11501 and it is showing up twice in RME. Once with the host name and once with the IP address. It does not show up as an Alias Device in RME Device Management. How do I get rid of one of them?

    DB:3.10:Lms 3.1 Rme Device Shows Up Twice df


    The bug will never be fixed. The CSS developers only add ipAddrTable entries for physical interfaces, and this is by design.

  • RELEVANCY SCORE 3.05

    DB:3.05:Bootstrap Version 3f



    Hello

    What is difference between System Bootstrap version Vs IOS version. Do they need to be same

    Cisco Internetwork Operating System Software

    IOS (tm) 3700 Software (C3745-IK9O3S-M), Version 12.3(1a), RELEASE SOFTWARE (fc1)

    Copyright (c) 1986-2003 by cisco Systems, Inc.

    ROM: System Bootstrap, Version 12.2(8r)T2, RELEASE SOFTWARE (fc1)

    DB:3.05:Bootstrap Version 3f


    Its the version of your rom (rommon mode):

    ROM-ROM is generally the memory on a chip or multiple chips. It is available on a router's processor board. It is read-only, which means that data cannot be written to it. The initial software that runs on a Cisco router is called the bootstrap software and is usually stored in ROM. The bootstrap software is invoked when the router boots up.

  • RELEVANCY SCORE 3.00

    DB:3.00:Rme Not Compatible With Nm-16esw-1gig fs



    Could not manage NM-16ESW-1GIG with CW LMS RME. Should it work or it is not supported in RME?

    DB:3.00:Rme Not Compatible With Nm-16esw-1gig fs


    Thanks a lot for support. I'll open a TAC case

    Kind regards

  • RELEVANCY SCORE 2.96

    DB:2.96:Rme And Fwsm aj



    Can i use RME to fetch configuration from FWSM installed in 6509 switch ?

    DB:2.96:Rme And Fwsm aj


    RME can archive the configs of a FWSM. The FWSM has to have either TFTP or RCP enabled in order for RME to do so.

  • RELEVANCY SCORE 2.91

    DB:2.91:Problem Sql 2005 kd


    At First, i cleaned previous components of SQL 2005 using Windows installer Clean up tool.Then  I installed Microsoft SQL 2005 on my windows xp mechine. I got  some installation errors .
    These is my summary Log: Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version      : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time            : Thu Apr 23 17:56:59 2009  USER-F26A737E73 : The current system does not meet minimum hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLSupport_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_OWC11_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BackwardsCompat_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_MSXML6_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLSupport_2.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_OWC11_2.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BackwardsCompat_2.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_MSXML6_2.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLSupport_3.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_OWC11_3.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BackwardsCompat_3.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_MSXML6_3.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLSupport_4.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_OWC11_4.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BackwardsCompat_4.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLSupport_5.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLNCLI_3.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_OWC11_5.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SqlWriter_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BackwardsCompat_5.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_MSXML6_4.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Integration Services Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_DTS.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : SQLXML4 Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLXML4_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73Product         : SQL Server Database ServicesError           : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name.--------------------------------------------------------------------------------Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Product Version : 9.00.1399.06 Install         : Failed Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQL.log Last Action     : DetectInstanceClash Error String    : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name. Error Number    : 28086 -------------------------------------------------------------------------------- Machine         : USER-F26A737E73Product         : Analysis ServicesError           : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name.--------------------------------------------------------------------------------Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Analysis Services Product Version : 9.00.1399.06 Install         : Failed Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_AS.log Last Action     : DetectInstanceClash Error String    : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name. Error Number    : 28086 -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Notification Services Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_NS.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : SQLXML4 Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLXML4_2.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLSupport_6.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_SQLNCLI_4.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft Office 2003 Web Components Product Version : 11.0.6558.0 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_OWC11_6.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Books Online (English) Product Version : 9.00.1399.06 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BOL_1.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : Microsoft SQL Server 2005 Backward compatibility Product Version : 8.05.1054 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_BackwardsCompat_6.log -------------------------------------------------------------------------------- Machine         : USER-F26A737E73 Product         : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install         : Successful Log File        : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0001_USER-F26A737E73_MSXML6_5.log --------------------------------------------------------------------------------
     SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
     

    DB:2.91:Problem Sql 2005 kd

    You must be selecting default instance when installing SQL Server. As default instance may be already configured. Try to select another name on the screen when instance has to be selected. GO To : http://blog.sqlauthority.com/2008/06/12/sql-server-2008-step-by-step-installation-guide-with-images/ and see the 12th image where it suggest how to select instance. Kind Regards, PinalPinal Dave
    Founder - http://blog.sqlauthority.com
    Search SQL Solutions

  • RELEVANCY SCORE 2.90

    DB:2.90:Ciscoworks And Switch Snmp Problem ad



    I am having problems adding a couple of switches into ciscoworks. Despite having upgraded rme to the latest version with a recent idu and upgrading the ios on these switches to the same ios i have on identical switches which have been added to ciscoworks with no problems these two remaining ones are still giving me a headache.

    When i add them to rme, rme then tries to immediately archive a config from the switch via snmp, when it does this the processor on the switch hits 100% utilization and a sh proc cpu shows that 99% of this is ip snmp, the device then ends up being listed as not responding.

    other switches of the same model have been upgraded with the same ios and go into ciscoworks without any problems.

    I have tried increasing the snmp timeout values in ciscoworks.

    any ideas

    regards

    mark

    p.s. below is a sh ver

    stam_reg#sh ver

    Cisco Internetwork Operating System Software

    IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(6)EA2c, RELEASE SOFTWARE

    (fc1)

    Copyright (c) 1986-2002 by cisco Systems, Inc.

    Compiled Thu 28-Feb-02 14:44 by antonino

    Image text-base: 0x80010000, data-base: 0x8042C000

    ROM: Bootstrap program is CALHOUN boot loader

    stam_reg uptime is 7 hours, 35 minutes

    System returned to ROM by power-on

    System restarted at 07:25:17 UTC Wed Nov 26 2003

    System image file is "flash:c2950-i6q4l2-mz.121-6.EA2c.bin"

    cisco WS-C2950-12 (RC32300) processor (revision C0) with 21295K bytes of memory

    Processor board ID FOC0616W0Y5

    Last reset from system-reset

    Running Standard Image

    12 FastEthernet/IEEE 802.3 interface(s)

    32K bytes of flash-simulated non-volatile configuration memory.

    Base ethernet MAC Address: 00:09:7C:A7:62:C0

    Motherboard assembly number: 73-5782-09

    Power supply part number: 34-0965-01

    Motherboard serial number: FOC06160LHL

    Power supply serial number: DAB0615272Z

    Model revision number: C0

    Motherboard revision number: A0

    Model number: WS-C2950-12

    System serial number: FOC0616W0Y5

    Configuration register is 0xF

    DB:2.90:Ciscoworks And Switch Snmp Problem ad


    What version of CW and RME? Do these switches have different snmp community strings? Is there an acl for snmp?

    Try this. Go to "Server Configuration", Diagnostics", "Connectivity Tools", "Management Satation to Device". Test connectivity via snmp.

  • RELEVANCY SCORE 2.89

    DB:2.89:Discrepancy Of Rme And Dcr Databases 1k



    Hello,

    At this moment we have 3 CiscoWorks servers in 3 data centers

    10.228.106.251 (runs the master DCR)

    10.230.105.251 (runs a slave DCR)

    10.232.104.251 (runs a slave DCR)

    A Peer server User and password are setup on all servers

    A System Identity User and password are setup on all servers

    Self-signed certificates are created on all 3 servers and the Master certifcate is copied to the slaves and the Slave certificates to the Master.

    Those are valid

    In the DCR on the master there are 682 devices (when I select 'All Devices')

    In the RME on the master I see

    RME/Devices/Device Mgmt: 715 devices

    RME/Config/Archive Mgmt: 715 devices

    In the RME on the slave 10.230.105.251 I see

    RME/Devices/Device Mgmt: 673 devices

    RME/Config/Archive Mgmt: 366 devices

    In the RME on the slave 10.232.104.251 I see

    RME/Devices/Device Mgmt: 702 devices

    RME/Config/Archive Mgmt: 390 devices

    My question :

    How is it possible that the RME slaves have such a different number of devices?

    All suggestions/explanations are welcome ...

    Thx,

    Jan

    DB:2.89:Discrepancy Of Rme And Dcr Databases 1k


    Assuming the servers are not integrated with ACS, or they are integrated with ACS, and you are using the same user on all servers, the most likely causes of the discrepancy are one, that RME auto-manage is disabled on the servers, and you have manually managed different devices in each server, or two, the servers all have different Common Services MDF versions. If the MDF is different on the master vs. the slaves, then some devices might not sync correctly between the master and slave.

    Check Common Services Software Center Device Update CiscoWorks Common Services to make sure the MDF version is the same on all servers.

  • RELEVANCY SCORE 2.86

    DB:2.86:Vss Device Problem sf



         We have installed Ciscoworks LMS 3.2 on Windows Server 2003 Enterprise edition. We are trying to add 6500 Switch which is in vss mode, CDA job was successful but when we are accessing the switch from cisco view it is showing only one chassis

    We have one WISM and one FWSM card in each 6500 switch this cards is showing Unsupported card in cisco view.

    Following is the software version of RME and Cisco View

    RME 4.3.1

    Cisco View 6.1.9

    DB:2.86:Vss Device Problem sf


    Thanks for the reply .

    I had opened a TAC case and as per the engg there is a new package that is currently being tested by the developers that will provide support.

    Below is the Bug ID Details filed for the issue

    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetailsbugId=CSCtf43230

    Regards

  • RELEVANCY SCORE 2.82

    DB:2.82:Rme Config Archive Issue With 4507-R 3j



    Hi

    we are getting same error after upgarding MDF 1.13 and Cat4000IOS.RME40.v3-0.readme.Zip.device package for RME.but still the same error

    10.112.200.3 PRIMARY RUNNING Feb 26 2009 20:29:31 CM0056 Config fetch failed for 10.112.200.3 Cause: CM0204 Could not create DeviceContext for 837 Cause: CM0206 Could not get the config transport implementation for 10.112.200.3 Cause: UNKNOWN Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed.

    RME version 4.0.5

    Running IOS on both the switchws is cat4500-ipbasek9-mz.122-40.SG.bin

    also both these devices showing in RMEDEVICESELECTOR LIST ? SIGN.

    Plse help me out this is on another server.

    DB:2.82:Rme Config Archive Issue With 4507-R 3j


    Hi Clark

    thanks a lot it is 4507R-E so we need to upgarde 4.0.6 than we will update CAT4000IOS...once we will done the same let you know the resull

    Regards

    Vaibhav

  • RELEVANCY SCORE 2.79

    DB:2.79:Rme With Csm? zz



    All,

    Have spent the last couple of days playing around with CSM4.1 in advance of formal testing and deployment.

    To set the scene we already use LMS (currently LMS3.01 although looking to upgrade) and familiar with the functionality of RME to deal with inventory/config management etc.

    My question is what is the purpose/use of RME with Cisco Security Manager?

    The documentation suggests you can either:

    Install RME on same server as CSMConfigure CSM to use RME on another server (e.g. the LMS one)

    However it all seems a little pointless. Initially installed RME on the CSM server (as version of RME on LMS is so old now).....but...

    CSM doesn't seem to use the RME DCR for anything, indeed you have to add the device into CSM manually (or export from DCR and import into CSM).

    CSM doesn't seem to use any of the RME configuration or inventory.

    AUS deals with the software updates.

    So I uninstalled RME and left CSM without any RME and can't find any noticable loss of functionality.

    So back to my original question, what is the purpose/use of RME with Cisco Security Manager?

    Thanks

    Mike

    DB:2.79:Rme With Csm? zz

    If you have RME already, then don't install it since it duplicating efforts with LMS functionality. Some people don't have CSM and LMS in their environment. So the thinking was to provide RME for inventory management, device configuration management, software image management, change audit services, and syslog analysis.

  • RELEVANCY SCORE 2.79

    DB:2.79:Netvanta 1224st Stuck In #Bootstrap m8



    I have a Netvanta 1224ST that was suddenly unpingable.

    I consoled in and got a #BOOTSTRAP: prompt. It looks like something went wrong. I try to assign an IP and it started cycling this:

    bootstrap#

    Switch (1200504L1)

    Executing bootstrap...

    ram: 16777216 bytes of RAM detected.

    Serial Number: LBADTN0816AA732

    Bootstrap version: 12.02.00, checksum: C440, Fri May 12 15:14:02 2006

    CORE: source\PacketCoreDrivers\IDT3233X\Interrupts.cpp#488: AdFatal(Invalid load or fetch from address = 0x00000027. Access occurred at PC = 0x000c019c, SP = 0x8016d140. StackTrc: Warning! Stack ptr = 8016D140 not in CurrentTask's range(00183bd0 - 0018bbd0)

    )..F^....~.o...~"

    flash: initializing flash devices...

    flash: 8388608 bytes of FLASH detected at 0xbc000000

    vfs: NONVOL: 120 tracks, 64 sectors/track, 1024 bytes/sector.

    eth0/1: initializing...

    switch: 16 MB of buffer pool DRAM detected, 64 bit bus width

    bootstrap: Checking boot configuration...

    bootstrap: Boot configuration not found.

    bootstrap: Upload a new image using the 'copy' command

    or specify the correct primary/backup images using the

    'boot system flash filename backup_filename' command.

    bootstrap: Error in boot configuration!!! Checking backup boot configuration.

    bootstrap: Boot configuration not found.

    bootstrap: Invalid boot configuration, entering bootstrap mode...

    cli: starting user interface

    DB:2.79:Netvanta 1224st Stuck In #Bootstrap m8


    Follow these directions to reload the firmware of the unit and load a basic startup config. After this is complete, you should be able to program the unit as desired and place into production.

    Download the firmware of your choice for the Adtran Netvanta 1224ST at Software Downloads

    Download Tera Term Pro at TeraTerm 3.1.3 - Telnet, SSH2, SSL Client with built in Web Server

    Connect to the unit with a console cable (9 pin straight-through serial cable)Open Tera Term Pro make a serial connection to the unit

    Type the following...

    erase file-system

    [wait for completion, 100%]

    copy xmodem flash

    [the name of the firmware you downloaded earlier]

    * in Tera Term - file transfer xmodem send select the firmware you downloaded earlier.

    Select the following text and save to a file named starup-config with no extension

    !

    !

    hostname "Switch"

    enable password password

    !

    event-history on

    no logging forwarding

    no logging email

    logging email priority-level info

    !

    username "admin" password "password"

    !

    banner motd #

    ****** Important ******

    Enable and Telnet passwords are configured to "password".

    Please change them immediately.

    The vlan 1 interface is enabled with an address of 10.10.10.1

    Telnet access is also enabled.

    #

    !

    !

    !

    !

    !

    !

    !

    !

    !

    vlan 1

    name "Default"

    !

    interface vlan 1

    ip address 10.10.10.1 255.255.255.0

    no shutdown

    !

    !

    !

    no ip tftp server

    ip http server

    no ip http secure-server

    no ip snmp agent

    no ip ftp agent

    !

    !

    !

    !

    !

    !

    !

    line con 0

    no login

    !

    line telnet 0 4

    login

    password password

    !

    !

    !

    !

    !

    end

    Go back to Tera Term Pro and type the following...

    copy xmodem flash

    startup-config

    * in Tera Term - file transfer xmodem send select startup-config

    boot

  • RELEVANCY SCORE 2.79

    DB:2.79:Installing Idus To Ciscoworks Rme 3.5 18



    Can anybody point me in the right direction for documentation showing how the patch is applied/ the process.

    Thank You

  • RELEVANCY SCORE 2.79

    DB:2.79:Cisco Works Lms 3.1 Rme am



    The device is not present in RME, but the RME job collection status shows the job is running.please help if any solution..

    DB:2.79:Cisco Works Lms 3.1 Rme am


    Shows what job is running?  What does this have to do with a missing device?

  • RELEVANCY SCORE 2.79

    DB:2.79:Tip: Resolve Bootstrap Animate Conflict x9



    I built a wee navigation system for a set of pages showing Edge Animate (EA) compositions. The system was built using Twitter Bootstrap 3.

    When I drew circles, they appeared smaller and slightly offset when in the browser as compared to EA.

    The issue was a piece of CSS that comes with Bootstrap that has to be overridden:

    Original CSS:

    *,

    *:before,

    *:after {

    -moz-box-sizing: border-box;

    box-sizing: border-box;

    }

    Override CSS:

    *,

    *:before,

    *:after {

    -moz-box-sizing: inherit;

    box-sizing: inherit;

    }

    DB:2.79:Tip: Resolve Bootstrap Animate Conflict x9


    I built a wee navigation system for a set of pages showing Edge Animate (EA) compositions. The system was built using Twitter Bootstrap 3.

    When I drew circles, they appeared smaller and slightly offset when in the browser as compared to EA.

    The issue was a piece of CSS that comes with Bootstrap that has to be overridden:

    Original CSS:

    *,

    *:before,

    *:after {

    -moz-box-sizing: border-box;

    box-sizing: border-box;

    }

    Override CSS:

    *,

    *:before,

    *:after {

    -moz-box-sizing: inherit;

    box-sizing: inherit;

    }

  • RELEVANCY SCORE 2.78

    DB:2.78:Hi Friends,Kindly Help In Uploading Ios In Cisco C870 Router 7c



    A couple of days before i removed the flash from router becoz its not working fine,all the screen comes in junk format.

    so before deleting flash i took backup but when i am trying to restore flash again its showing error.

    System Bootstrap, Version 12.3(8r)YI4,

    RELEASE SOFTWARE Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc.

    C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory No bootable image file: flash:/ Unable to open boot file System Bootstrap,

    Version 12.3(8r)YI4, RELEASE SOFTWARE Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc.

    C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory

    rommon 1 confreg 0x2101

    rommon 2 i

    rommon 3

    System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE

    Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc.

    C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory

    No bootable image file: flash:/ Unable to open boot file

    System Bootstrap, Version 12.3(8r)YI4,

    RELEASE SOFTWARE Technical Support: http://www.cisco.com/techsupport Copyright (c) 2006 by cisco Systems, Inc.

    C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory

    rommon 1

    DB:2.78:Hi Friends,Kindly Help In Uploading Ios In Cisco C870 Router 7c


    Sorry for the delay            

    really busy for finding the solution at last i found it.

    I uploaded ios in rommon mode by using console the steps  used are below.

    step1:put ios in computer c: drive or any folder.

    step2:open hyperterminal with default setting on router type the command as shown below

    step3: rommon 29 xmodem -c c:\c870-advsecurityk9-mz.124.T.bin

    message appears

    "Do not start the sending program yet...

    WARNING: All existing data in bootflash will be lost! Invoke this application only for disaster recovery." Do you wish to continue? y/n  [n]:  y

    Ready to receive file c:c870-advsecurityk9-mz.124.T.bin

    step4:go to tranfer select send file .

    step5: specify the image file name and location and enter xmodem as a protocol .

    step6:click on send to start transfer

    . Specify the image file name and location and enter xmodem as the protocol.

    the messege receved when transfer successfully complete.

    "CDownload Complete!

    " Copying file c:c870-advsecurityk9-mz.124.T.bin to flash.

    Writing flash:/c870-advsecurityk9-mz.124.T.bin

    Write operation will take approximately 85 to 256 seconds

    check whether ios save in flash by b elow command

    step7:rommon 34 dir flash:

    Directory of flash:/ 2    -rwx  13993708

           c870-advsecurityk9-mz.124.T.bin 9484288 bytes available (13998080 bytes used)

    step8: rommon 35 confreg 0x2102

    You must reset or power cycle for new config to take effect put i or reset to reload router

    step9: rommon 36 i now router boots from flash without any problem

    . I am posting the  solution because others should not suffer like me.

    Message was edited by: itsecurity mk

  • RELEVANCY SCORE 2.75

    DB:2.75:Rme Problem fs



    hii,

    we facing problem in RME, we are getting log like

    Inventory Collection Failure Scheduled by Polling Job 1004.15 Mar 21 2009 12:02:00

    1004.15 System Inventory Polling Failure System Inventory Polling Job

    ????

    DB:2.75:Rme Problem fs


    There should be a more specific error. Click on the job ID of the failed job, then look at the list of failed devices. What error messages do you see?

  • RELEVANCY SCORE 2.74

    DB:2.74:Rme Image Location Directory pk



    Hello

    We have RME version 4.0.5. Everything installed on Solaris (SunOS 5.8 Generic_117350-46 sun4u sparc SUNW,Sun-Fire-280R).

    I've created directory:

    /worksy_images which belongs to: casuser:casusers

    Apache serving cisco works is working under casuser:casusers. But when i wanted to configure RME, and in ViewEditPreferences/Image Location typed: /worksy_images i received error:

    "User Error: Invalid data directory. Recommended action: Verify that directory exists"

    Why ? Directory exists.

    Thanx

    DB:2.74:Rme Image Location Directory pk


    Hello

    I solved this problem:

    i need to have directory:

    /var/adm/CSCOpx/files/rme/repository

    this is the only one which could "be found".

    It's working fine right now:)

  • RELEVANCY SCORE 2.74

    DB:2.74:Rme 4.0.6 Archive Mgmt Jobs Failing a7



    Hi All,

    Total we have 100 devices configured in CiscoWorks.

    The daily jobs status in the Archive Management is showing failed since long time, and if I see any job ID details its showing only its showing 6 devices which should show the total configured devices.

    Please find the attached screenshots for RME jobs and job details.

    Experts, what could be the problem, is there anything needs to configured.

    Thanks in advance.

    Regards,Naidu.

    DB:2.74:Rme 4.0.6 Archive Mgmt Jobs Failing a7


    I mean that if you only have six devices in RME, and you schedule a config archive job and select the All Devices box, then the job will only ever run on those six devices.  If you add new devices to RME at a later time, the job will not archive the config for those new devices.  You will have to delete and recreate the job.

    In the job browser, there is a link for the individual device details.  That link will show the error relating to why the archive job failed.

  • RELEVANCY SCORE 2.74

    DB:2.74:Installing Microsoft Sql Server 2005 9.00.1399.06 f1


    I'm having problem with installing Microsoft SQL Server 2005 9.00.1399.06. I have (I think removed) all beta and other SQL files but the installation still fails.Any ideas on where to look for the problem(s)?summary.txt looks like this:Microsoft SQL Server 2005 9.00.1399.06 ============================== OS Version : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time : Fri Nov 25 22:42:40 2005 P2 : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.Machine : P2 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLSupport_1.log -------------------------------------------------------------------------------- Machine : P2 Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine : P2 Product : Microsoft SQL Server VSS Writer Product Version : 9.00.1399.06 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SqlWriter_1.log -------------------------------------------------------------------------------- Machine : P2 Product : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_MSXML6_1.log -------------------------------------------------------------------------------- Machine : P2 Product : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.1399.06 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLSupport_2.log -------------------------------------------------------------------------------- Machine : P2 Product : Microsoft SQL Server Native Client Product Version : 9.00.1399.06 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLNCLI_2.log -------------------------------------------------------------------------------- Machine : P2 Product : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_MSXML6_2.log -------------------------------------------------------------------------------- Machine : P2Product : SQL Server Database ServicesError : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name.--------------------------------------------------------------------------------Machine : P2Product : SQL Server Database ServicesError : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name.--------------------------------------------------------------------------------Machine : P2 Product : Microsoft SQL Server 2005 Express Edition Product Version : 9.00.1399.06 Install : Failed Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQL.log Last Action : DetectInstanceClash Error String : An instance with the same name is already installed on this computer. To proceed with SQL Server Setup, provide a unique instance name. Error Number : 28086 -------------------------------------------------------------------------------- Machine : P2 Product : Microsoft SQL Server 2005 Tools Express Edition Product Version : 9.00.1399.06 Install : Successful Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_Tools.log -------------------------------------------------------------------------------- SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt. Time : Fri Nov 25 22:47:40 2005 List of log files:C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_Core(Local).logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLSupport_1.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLNCLI_1.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SqlWriter_1.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_MSXML6_1.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLSupport_2.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQLNCLI_2.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_MSXML6_2.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SQL.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_Tools.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_Datastore.xmlC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_.NET Framework 2.0.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_Support.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_Core.logC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txtC:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_SCC.logThis is"SQLSetup0011_P2-Core.log":Microsoft SQL Server 2005 Setup beginning at Fri Nov 25 22:41:49 2005Process ID : 3500f:\22644329947aca3bcc8446\setup.exe Version: 2005.90.1399.0Running: LoadResourcesAction at: 2005/10/25 22:41:49Complete: LoadResourcesAction at: 2005/10/25 22:41:49, returned true...And then a number of actions that end with "returned true"...Running: DetectLocalBootstrapAction at: 2005/10/25 22:42:37Complete: DetectLocalBootstrapAction at: 2005/10/25 22:42:37, returned trueRunning: LaunchLocalBootstrapAction at: 2005/10/25 22:42:37Error: Action "LaunchLocalBootstrapAction" threw an exception during execution. Error information reported during run:"C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe" finished and returned: 28086Aborting queue processing as nested installer has completedMessage pump returning: 28086Something goes wrong, but I'm not able toanalyse what."SQLSetup0011_P2_Core(Local).log" looks like this:Microsoft SQL Server 2005 Setup beginning at Fri Nov 25 22:42:40 2005Process ID : 1424C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe Version: 2005.90.1399.0Running: LoadResourcesAction at: 2005/10/25 22:42:40Complete: LoadResourcesAction at: 2005/10/25 22:42:40, returned true...Then there is a number of actions that end with various errors....One or more packages failed to install. Refer to logs for error details. : 28086 Error Code: 0x80076db6 (28086)Windows Error Text: Source File Name: sqlchaining\sqlchainingactions.cppCompiler Timestamp: Thu Sep 1 22:23:05 2005 Function Name: sqls::ReportChainingResults::performSource Line Number: 3097 ---- Context -----------------------------------------------sqls::HostSetupPackageInstallerSynch::postCommitsqls::HighlyAvailablePackage::preInstallled due to cancel code received from cancel source: 29539 Error: Failed to add file :"C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_P2_.NET Framework 2.0.log" to cab file : "C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\SqlSetup0011.cab" Error Code : 2Delay load of action "UploadDrWatsonLogAction" returned nothing. No action will occur as a result.Message pump returning: 28086/anders

    DB:2.74:Installing Microsoft Sql Server 2005 9.00.1399.06 f1

    Hi, What if I want to remove(clean) all default instances and install SQL Server 2005 RTM as the default instance. I am getting the same error trying to install RTM. I unistalled Sept CTP. How do I remove all the existing instancesThanks,-Suri

  • RELEVANCY SCORE 2.73

    DB:2.73:Serial Number For A Cat 4006 fj



    We have a CAT 4006 that seems to be reporting serial number contrary to what I have seen documented. Here is a screen print of the show version. Notice that the Serial number reported is the same serial number reported on the first line of modules. I understand that the Serial number that is reported in the line that contains the Model number should be the Serial number of the chassis. Anybody run into this and what the fix will be? I'm new to CAT OS devices and have not been able to find the corresponding SNMP-SERVER CHASSISID command that exists in the IOS world.

    Incidently I need to dump this information from RME 3.4 using DEE to create a CSV for upload into Remedy if anyone is wondering why I need the chassis serial number.

    Thanks for the help

    Randy Moore

    NOVA Chemicals

    WS-C4006 Software, Version NmpSW: 6.1(2)

    Copyright (c) 1995-2001 by Cisco Systems, Inc.

    NMP S/W compiled on Jan 25 2001, 14:04:40

    GSP S/W compiled on Jan 25 2001, 11:49:56

    System Bootstrap Version: 5.4(1)

    Hardware Version: 1.2 Model: WS-C4006 Serial #: JAB04290BMG

    Mod Port Model Serial # Versions

    --- ---- ---------- -------------------- -----------------------

    1 2 WS-X4013 JAB04290BMG Hw : 1.2

    Gsp: 6.1(2.0)

    Nmp: 6.1(2)

    2 34 WS-X4232-L3 JAB0517082F Hw : 1.6

    3 48 WS-X4148-RJ JAE04420405 Hw : 2.3

    4 48 WS-X4148-RJ JAE04430202 Hw : 2.3

    DB:2.73:Serial Number For A Cat 4006 fj


    Thanks, that really helped me out. I was using the Bug tool to find this bug and was having no luck until I saw the email update. Saved me from opening a TAC case. Thanks!!!

    Randy

  • RELEVANCY SCORE 2.73

    DB:2.73:Email Notifications Within Rme cc



    Is there a way to have RME send SMTP alerts when a device is not responding in the avaiability monitor or Reachability Dashboard? I am running RME version 3.5.

    DB:2.73:Email Notifications Within Rme cc


    Or LMS 2.5.1 and use DFM to email you when it becomes unreachable.

  • RELEVANCY SCORE 2.73

    DB:2.73:Rme 4.0 Devices In Partially Successfull Error Cm0012 zk



    Hi,

    14 devices in RME config archive are in partially successful status, le startup and running is ok for these devices but the vlan not ??? the error specified is :

    CM0012: Unable to create new version on archive $1 Action: Check if disk space is available and directory has required permissions.

    The actions have been performed and are ok ?

    any idea ?

    thanks

    Olivier

    DB:2.73:Rme 4.0 Devices In Partially Successfull Error Cm0012 zk


    There're four perl scripts that come bundled with the CSCsh39475 patch: Two of these (with names "...WithBackup..." will back up the PRIMARY (RUNNING) and VLAN configs of the devices that the scripts find as mismatches. You just need to manually replace the "password" (line 13-ish) in those scripts with your own RME db password. The other two scripts are names "...WithoutBackup..." which are self-explanatory.

    Another way to match the numbered folders with devices is to mouse over OR click on the device names in Device Center - Trouble shooting. Each devices' RME ID number is in the very long corresponding URL.

  • RELEVANCY SCORE 2.73

    DB:2.73:Rme 4.0.6 - Aa Doesnt Work With Choose Devices: Flagged! dk



    Hi folks,

    I've upgraded RME 4.0.6 from RME 4.0.5 on solaris 8 operative system.

    Into "RME Tools Syslog Automated Actions", when I select some devices, with "Choose Devices:" flagged, the Automatic Action doesn't work for devices selected. It occurs also when I select "All devices" with "Choose Devices" flagged!

    If I flag "All Managed Devices", the AA run corectly (email send).

    This not occurs in the previous version of RME 4.0.5!!

    Any helps would be appreciate.

    Thank and best regards

    Leonardo

    DB:2.73:Rme 4.0.6 - Aa Doesnt Work With Choose Devices: Flagged! dk


    Hi davistan,

    thanks for your kind replay.

    I rollback the previous version of the Syslog Analyzer files :

    /opt/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/sa/actions/RmeSaActionStore.class

    /opt/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/classes/com/cisco/nm/rmeng/sa/filters/RmeSaFilterStore.class

    /opt/CSCOpx/MDC/tomcat/webapps/rme/WEB-INF/screens/Tools/syslog/AutomatedAction.jsp

    Now the problem doesn't never occur.

    Do you know which problem was solved into SyslogAnalyzer package from RME 4.0.5 to RME4.0.6?

    Joe clarke time ago told me, that the new RME 4.0.6 relase, solved the time delay into DNS resolution of SyslogAnalyzer. The lot of time, spent to solve devices IP address, cause the SyslogCollector disconnection.

    Is this issue solved (or not) into CSCOsla package of RME 4.0.6?

    Maybe it is solved into Syslog Collector CSCOslc package?

    Do you know this?

    Thanks a lot

    Leonardo

  • RELEVANCY SCORE 2.73

    DB:2.73:Upgrade Rme 4.0.5 To Rme 4.2 In Lms 17



    Hello All,

    We have a LMS server (2.6 Version) and we want to know if is possible to do an upgrade from RME 4.0.5 to RME 4.2.

    Is possible?

    Thanks in advance

  • RELEVANCY SCORE 2.73

    DB:2.73:Boot Rom Upgrade 2500 Series dj



    Hello,

    does anybody know what the minimum bootstrap version is on a 2500 router to support 3rd party flash ? I am running version 11.0(10c) and that works fine:

    ROM: System Bootstrap, Version 11.0(10c), SOFTWARE

    BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFT

    But now I have a 2500 with the following:

    ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE

    BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1)

    I wonder if I need the BOOT ROM upgrade for this router to support the additional 3rd part flash...

    Thanks for your responses in advance !

    Regards,

    Georg

    WARE (fc1)

    DB:2.73:Boot Rom Upgrade 2500 Series dj


    Boot ROM version 10.2(8a) supports most flash for the 2500 series. Take a look at Table 13 in this link:

    http://www.cisco.com/univercd/cc/td/doc/product/software/ios102/rn_rt102/83523.htm#xtocid2393310

  • RELEVANCY SCORE 2.71

    DB:2.71:Devices Dont Appear Anywhere In Cs/Rme d1



    I see, for example, in "Config Archival Status" 900 "failed" devices, but cannot delete them as they are not showing up in CS or RME

    DB:2.71:Devices Dont Appear Anywhere In Cs/Rme d1


    I found the problem - not all devices were properly configured in ACS (CW2K runs in ACS mode).

    I changed the mode to local, removed pending devices and then re-enabled ACS mode.

    Thanks for the help anyway.

    /Vladimir

  • RELEVANCY SCORE 2.69

    DB:2.69:Log Level Setting In Rme cs



    When I am in RME --Admin -- System Preferences -- Loglevel Settings

    I can't seem to get the settings for all applications set to a log level of "info". I click apply afterward but the setting does not stay? Is this a bug? It works in my other CW Server. I am using RME 4.0 with Service Pack 1.

    Thank you,

    Brandon

    DB:2.69:Log Level Setting In Rme cs


    Hai,

    What u have done is correct , but may be what u understood is wrong.

    After select all Loglevel setting to info clicking apply will display a message box Successfully changed the settings.

    Then if u click ok u are not seeing "Info " displayed on the Dropdown box.

    But actually it has done u can verify it by selecting any one application then it will show the Info in that box, all the applications if u select individually it will definitely show.

    I checked it.It is not abug.

    If you r still not satisfied check with any application log file whther the recent activity u have done in RME reflects there.

    Cheers.

    Hope this information is useful to you.

    If so dont forget to rate this :)

    Regards

  • RELEVANCY SCORE 2.69

    DB:2.69:Unknown Devices In Rme Hardware Summary pj



    we have 87 devices that are showing up in the unknown devices category on the RME Hardware Summary. This devices are ONS M-Series Software Cards for our 15454 chassis. Any idea how I can get them out of the unknown state?

    DB:2.69:Unknown Devices In Rme Hardware Summary pj


    Since the ONS M-series cards are not supported devices under CiscoWorks LMS (reference: http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/device_support/table/lms32sdt.html), you'll need to:

    a. delete them from your Device and Credentials Repository (DCR). Do this via: Common Services Device and Credentials Device

    Management.

    b. change your discovery options to make sure they are not rediscovered / re-added. Depending on your setup, how to do this varies. If you are doing automated discovery in LMS, go to: Common Services Device and Credentials Device Discovery Discovery Settings and configure a filter. SysObjectID may be a good filter option in this case.

    If you are running in ACS mode, I'm not sure you can delete the devices in LMS without also deleting them in the ACS server. That might affect your AAA procedure for your devices.

  • RELEVANCY SCORE 2.69

    DB:2.69:Sql Server Setup Failed [Microsoft Sql Server 2005 9.00.1399.06] Xp Professional Service Pack 3 (Build 2600) xa


    I just want the Bussiness Intelligence studio client tools installed in my local box. The set up fails without giving meaning full Error. Pasted below is the summary.txt file. Since i'm installing the client tools only; shouldn't be a problem with the system
    requirements. Can someone help me out.
    My System Information
    Intell Core 2 Duo 3.00 GHz
    1 GB of RAM
    Thanx in advance
    Asela
    Microsoft SQL Server 2005 9.00.1399.06
    ==============================
    OS Version : Microsoft Windows XP Professional Service Pack 3 (Build 2600)

    Time : Tue Jun 01 16:02:37 2010

    D00143 : The current system does not meet the minimum hardware requirements for this SQL Server release. For system requirements, see Hardware and Software Requirements, in the readme file or in SQL Server Books Online.
    D00143 : The current system does not meet recommended hardware requirements for this SQL Server release. For detailed hardware requirements, see the readme file or SQL Server Books Online.
    D00143 : There was an unexpected failure during the setup wizard. You may review the setup logs and/or click the help button for more information.

    SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.

    Time : Tue Jun 01 16:03:45 2010

    List of log files:
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_Core(Local).log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_Datastore.xml
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_.NET Framework 2.0.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_Core.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_.NET Framework 2.0 LangPack.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_.NET Framework Upgrade Advisor.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_.NET Framework Upgrade Advisor LangPack.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_.NET Framework Windows Installer.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_.NET Framework Windows Installer LangPack.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_Support.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_SCC.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0009_D00143_WI.log

    DB:2.69:Sql Server Setup Failed [Microsoft Sql Server 2005 9.00.1399.06] Xp Professional Service Pack 3 (Build 2600) xa

    Hi,
    Figured out the problem my self, the problem was; that i was trying to install over the network. So if anyone' come across this annoying Error and you are trying to install SQL 2005 over the network or from ashared location the work around can be found
    here!
    http://support.microsoft.com/kb/916760
    Thanx everyone who viewed this thread.
    Cheers.!
    Asela

  • RELEVANCY SCORE 2.69

    DB:2.69:Rme Software Management k3



    I installed RME in the network. Most switches are Cat3500XL or Cat3550 switches. When I want to download the software image from the devices to RME to crease baseline, there is no image available. I use "Add image" and "From Network", then neither "IOS" nor "Catalyst" works.

    I have check all device attributes and seems fine. And System Configure Manager works fine too. The RME version is 3.5 and IDU version is 5.0. LMS update 1 is also installed.

    Anyone know the reasons? Thanks a lot!

    DB:2.69:Rme Software Management k3

    Thanks a lot, I installed but it still doesn't work.

  • RELEVANCY SCORE 2.69

    DB:2.69:1800 Series Router While Power Off Its Showing Like This How To Trouble Shoot This x8



    Hi, All

    thanks in Advance,

    while power off and power com the router went to rmon mode

    and its shown like this

    how to trouble shoot this problem

    System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2007 by cisco Systems, Inc.

    C1860 series platform with 262144 Kbytes of main memory

    Readonly ROMMON initialized

    program load complete, entry point: 0x80015000, size: 0xb700

    program load complete, entry point: 0x80015000, size: 0xb700

    program load complete, entry point: 0x80020000, size: 0x1dac7e0

    Self decompressing the image : ################################################################################################################################################################################################################################################ [OK]

    Smart Init is enabled

    smart init is sizing iomem

      ID            MEMORY_REQ                 TYPE

    Bad FIO_0 EC220 vendor device id 0xFFFFFFFF

    *** System received a SegV exception ***

    signal= 0xb, code= 0x400, context= 0x84636be0

    PC = 0x0, Vector = 0x400, SP = 0x84637cec

    System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2007 by cisco Systems, Inc.

    C1860 series platform with 262144 Kbytes of main memory

    Readonly ROMMON initialized

    program load complete, entry point: 0x80015000, size: 0xb700

    program load complete, entry point: 0x80015000, size: 0xb700

    program load complete, entry point: 0x80020000, size: 0x1dac7e0

    Self decompressing the image : ################################################################################################################################################################################################################################################ [OK]

    Smart Init is enabled

    smart init is sizing iomem

      ID            MEMORY_REQ                 TYPE

    Bad FIO_0 EC220 vendor device id 0xFFFFFFFF

    *** System received a SegV exception ***

    signal= 0xb, code= 0x400, context= 0x84636be0

    PC = 0x0, Vector = 0x400, SP = 0x84637cec

    System Bootstrap, Version 12.4(11r)XW3, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2007 by cisco Systems, Inc.

    C1860 series platform with 262144 Kbytes of main memory

    Readonly ROMMON initialized

    rommon 1

    DB:2.69:1800 Series Router While Power Off Its Showing Like This How To Trouble Shoot This x8


    Likely a faulty unit that will require replacement.

    In these case, no repair or corrective action possible by the user.

  • RELEVANCY SCORE 2.69

    DB:2.69:Rme Device Names? 7x



    hello,

    I can't figure out why the device name field in Hardware Report shows IP and not device name. Campus Manager has no problem showing device names?

    thanks

  • RELEVANCY SCORE 2.68

    DB:2.68:Rme Maintenance - xs



    Where in RME is it that you can clean up things like previous Netconfig jobs?

    DB:2.68:Rme Maintenance - xs


    RME - Administration - Configuration Management - General Setup

    That is where you set up the purging of old Configs.

  • RELEVANCY SCORE 2.67

    DB:2.67:Upgrading System Bootstrap Version On 6500-Catos 1d



    I can't fingure out how to get started with upgrading the System Bootstrap on a 6500 running CATOS. I see the "Catalyst 6000 Sup2 Rommon2 Code" that's available in the software center. Is it as simple as tftp'ing to flash?

    Thanks!

    DB:2.67:Upgrading System Bootstrap Version On 6500-Catos 1d


    Thanks for those procedures. I was partially there...

    We are moving to the 64M ATA Flash cards on some of the switches. That requires you to have the 7.1.1 ROMMON installed on the switch.

    Thanks again!!

    JR

  • RELEVANCY SCORE 2.66

    DB:2.66:Aliased Devices In Rme j9



    Running LMS3.1 - RME is showing on device as an alias in the RME Device Status portlet. The list of alias devices however doesn't show any devices. How can this be cleared?

    DB:2.66:Aliased Devices In Rme j9


    This points to stale data in one of the RME database tables. The problem is cosmetic, but can be fixed with an SQL query. If you contact TAC, they can walk you through running the query.

  • RELEVANCY SCORE 2.66

    DB:2.66:Error: No System Memory Detected Cisco 1721 dx



    Hi to all,

    I have this message in the router -

    System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

    TAC Support: http://www.cisco.com/tac

    Copyright (c) 2003 by cisco Systems, Inc.

    ERROR: No system memory detectå

    System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

    TAC Support: http://www.cisco.com/tac

    Copyright (c) 2003 by cisco Systems, Inc.

    ERROR: No system memory detected

    Need some help,

    Best regards,

    Alberto

    DB:2.66:Error: No System Memory Detected Cisco 1721 dx


    Was this router working previously?

    The error is self-explanatory, the router is unable to find the system memory.

    You will need to open the router and verify the Boot ROM is properly seated, if properly seated - you will need to order a replacement Boot ROM as it's faulty.

    Check out this URL for further information on Boot ROM location

    http://www.cisco.com/en/US/docs/routers/access/1700/hardware/notes/1720btrm.html

    HTH,

    __

    Edison.

  • RELEVANCY SCORE 2.66

    DB:2.66:Rme 3.4 And Catalyst 1900 98



    Hi,

    I have a problem with rme 3.4 (solaris 2.7). I cant get the config files from catalyst 1900 via archive update, but in version 3.3 this is possible. And I need 3.4 to get catalyst 2950.

    Thanks

    DB:2.66:Rme 3.4 And Catalyst 1900 98


    I had this same problem and the fix I got from the TAC is to set the enable password in the "Enable" field and not in the "Enable Secret" field.

  • RELEVANCY SCORE 2.65

    DB:2.65:Syncronization Problem Between Campus Manager Rme md



    Hi,

    I am facing some strange problem. Some of 5500 devices is detected in Campus Manager but when I tried to syncronize devices information between Campus Manager RME, It's not showing in RME database. I don't wan't to add manually in Inventry. Can You help me..

    DB:2.65:Syncronization Problem Between Campus Manager Rme md


    Are you doing the sync from Campus to RME or reverse?. What do you mean by some 5500 devices is deleted in Campus Manager?. What version of Campus Manager is this?. Better way of doing the sync is to do the network discovery via Campus and then do the device sync to populate the RME Inventory as well. See http://www.cisco.com/univercd/cc/td/doc/product/rtrmgmt/cw2000/camp_mgr/camp_3x/cmgr_3_1/use_cmgr/cmsynch.htm for the procedure and troubleshooting the device sync. But there's a know issue where if a device is already present in the RME Inventory and you do a device sync from Campus which also have the same device, the sync will over write that device credentials in RME database with that of the ones from the Campus sync.

  • RELEVANCY SCORE 2.65

    DB:2.65:Rme Syslog In Real Time 33



    can I somehow see syslog messages in rme in real time?

    thanks

    DB:2.65:Rme Syslog In Real Time 33


    Please just port CiscoWorks over to LINUX.

  • RELEVANCY SCORE 2.65

    DB:2.65:Add Win2k Server In Rme? 1m



    Dumb question but I'm curious. Is it possible to add a Win2k server to RME?

    DB:2.65:Add Win2k Server In Rme? 1m


    You're exactly right! That's what I meant. Thanks.

  • RELEVANCY SCORE 2.65

    DB:2.65:Ios Upgrade Through Rme pp



    Hi, I am trying to upgrade our 3550CAT switch through RME, showing error "check flash0 exist". It has only one option to select in RME-distribute by devices-storage options-flash0, but Switch IOS dir is named as flash:. How can i change the target directory from flash0 to Flash.

    Running Cisco LMS 2.5 RME V.4.0.1

    DB:2.65:Ios Upgrade Through Rme pp


    Looks like bug CSCsb30408 which is resolved in RME 4.0.2

  • RELEVANCY SCORE 2.65

    DB:2.65:Rme Bug c8



    Hi,

    I am having one problem with Software management in RME. I tried to download images from cisco.com in the software repository, but the process was failed and showing the following error message.

    "Start images downloading:

    Image 1 of #1 :

    Checking if image is present in the library...

    c3560-advipservicesk9-tar.122-25.SEE2.tar is not present in the library.

    Downloading c3560-advipservicesk9-tar.122-25.SEE2.tar from Cisco.com.

    Start time: 17 Oct 2006 08:44:56

    File downloaded successfully. Calculating MD5 checksum...

    File downloaded successfully.MD5 checksum is failed."

    Note: RME version:4.0.4

    Please advice..

    Regards

    DB:2.65:Rme Bug c8


    See my reply on the Ask the Expert thread.

  • RELEVANCY SCORE 2.64

    DB:2.64:Rme Fail Until Install Rme33.Idu.V3-0.Win Patch za



    Good day

    I have CW2000 4th Edition Installed with RME 3.3 in a servant w2000 SP 4 with version 3.525.10220 of controllers ODBC.

    Install the RME33.IDU.v3-0.win patch and now it does not work well RME and I see east message: "{EssentialDbMonitor } cannot connect to 'rme' database..."

    And in Process Status, EssentialsDbMonitor show this information:

    Application failed or was registered incorrectly.

    Somebody could say me like solving this without giving format to the maquina. Thanks

    DB:2.64:Rme Fail Until Install Rme33.Idu.V3-0.Win Patch za


    Thanks rmushtaq.

    But why before applying the patch it was working well?

    This is what it is in logs

    Before

    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++

    EssentialsDbMonitor {Wed Jun 30 10:41:16 2004} Running DbMonitor version 2.1

    EssentialsDbMonitor {Wed Jun 30 10:41:16 2004} Sending Initial OK Message to process manager.

    Later

    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++

    EssentialsDbMonitor {Thu Jul 01 13:18:38 2004} Running DbMonitor version 2.1

    EssentialsDbMonitor ERROR {Thu Jul 01 13:18:38 2004} SQLDriverConnect: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified; SqlState: IM002

    EssentialsDbMonitor WARNING {Thu Jul 01 13:18:38 2004} Failed to connect to database. Retry number = 1 of 5.

    EssentialsDbMonitor ERROR {Thu Jul 01 13:18:48 2004} SQLDriverConnect: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified; SqlState: IM002

    EssentialsDbMonitor WARNING {Thu Jul 01 13:18:48 2004} Failed to connect to database. Retry number = 2 of 5.

    EssentialsDbMonitor ERROR {Thu Jul 01 13:18:58 2004} SQLDriverConnect: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified; SqlState: IM002

    EssentialsDbMonitor WARNING {Thu Jul 01 13:18:58 2004} Failed to connect to database. Retry number = 3 of 5.

    EssentialsDbMonitor ERROR {Thu Jul 01 13:19:08 2004} SQLDriverConnect: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified; SqlState: IM002

    EssentialsDbMonitor WARNING {Thu Jul 01 13:19:08 2004} Failed to connect to database. Retry number = 4 of 5.

    EssentialsDbMonitor ERROR {Thu Jul 01 13:19:18 2004} SQLDriverConnect: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified; SqlState: IM002

    EssentialsDbMonitor WARNING {Thu Jul 01 13:19:18 2004} Failed to connect to database. Retry number = 5 of 5.

    EssentialsDbMonitor ERROR {Thu Jul 01 13:19:28 2004} Unable to connect to database after trying 5 times.

    EssentialsDbMonitor ERROR {Thu Jul 01 13:19:28 2004} Cannot connect to the database. Shutting down the process EssentialsDbMonitor.

  • RELEVANCY SCORE 2.64

    DB:2.64:Me3400 Unknown In Cm 4.0.10 And Rme 4.06 Lms2.6 aa



    I have new ME3400 that is not show correctly in CM nor RME:

    From show version:

    Cisco IOS Software, ME340x Software (ME340x-METROBASE-M), Version 12.2(40)SE, RELEASE SOFTWARE (fc3)

    in CM it is shown as ciscoProducts.873, but when I try to go to 1.3.6.1.4.1.9.1.873 in the mib translator, then it is unknown.

    Anyone has a clue what to do ??

    DB:2.64:Me3400 Unknown In Cm 4.0.10 And Rme 4.06 Lms2.6 aa


    I don't see this model supported in any version yet -- cisco340024FSA

    You might want to open a TAC SR to see when this support is available

  • RELEVANCY SCORE 2.64

    DB:2.64:Rme 4.3.1 Not Archiving Configs On All Devices sd



    As the part of the screen shot shown, I have a total of 1312 devices in the RME. The number of total devices RME tried to collect inventory adds up to that. However, the numbers it tried to archive configuration do not (581 + 116 + 23 + 58 = 778 = 1312 - 534).

    Why are so many devices missing there?

    An RME job deploying a configuration template failed on a large number of devices, which led me to discover that many devices don't have archived configuration.

    When I manually start a "Sync Archive" job from the Device Center on a device showing "Configuration Last Archived Time: No configuration archived yet", the job succeeds.

    This is a serious issue. My immediate concern is to get configuration archived on all devices. What do I need to do to get RME to do that?

    DB:2.64:Rme 4.3.1 Not Archiving Configs On All Devices sd


    Thanks for the response.

    Yes, I have updated the device packages recently.

    Here is device package information for one of the devices that did not get config archived:

    1.1.3.6.1.4.1.9.1.516Cisco 3750 StackCatGL35.2

    When I try a device package update now on RME, I get "All the available package(s) at source location are already installed."

    When I try a device package update on all CiscoWorks modules, I only get one: DFMDeviceUpdates going from 17.0 to 18.0.

  • RELEVANCY SCORE 2.64

    DB:2.64:Ciscoworks Rme - Rics001 Error 7c



    Hello fellow forum members!

    We have a problem with RME.

    Inventory collection from a WS-C6513 switch is failing.

    The error is,

    RICS001 error - internal error

    Info about the switch,

    WS-C6513

    ROM: System Bootstrap, Version 12.2(17r)SX7, RELEASE SOFTWARE (fc1)

    And the corresponding ICServer log,

    [ Fri Sep 02  10:40:58 CEST 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,455,

    java.lang.NullPointerException

        at com.cisco.nm.rmeng.inventory.ics.invdata.containment.ContainmentAGInvData.compare(ContainmentAGInvData.java:103)

        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processContainmentAG(InvDataProcessor.java:860)

        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:329)

        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:915)

        at java.lang.Thread.run(Thread.java:595)

    [ Fri Sep 02  10:40:58 CEST 2011 ],ERROR,[Thread-17],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,927, Exception occured in process method while processing: 172.18.194.254 null

    ICSException

        at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:470)

        at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:915)

        at java.lang.Thread.run(Thread.java:595)

  • RELEVANCY SCORE 2.64

    DB:2.64:Cisco 888 Keeps Booting Into Rommon xp



    Hi All,

    i keep getting into romon for some reason on my C888, the following is an output i really need help doing the Security test in 1 mnth and need to use the CCP and this is the only router, Trued Confreg 2102,2101 still keeps booting into Rommon any else have any ideas?

    rommon 22 reset

    System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2008 by cisco Systems, Inc.

    C880 platform with 262144 Kbytes of main memory

    Upgrade ROMMON initializedloadprog: bad file magic number:      0x0boot: cannot load "flash:"

    System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2008 by cisco Systems, Inc.

    C880 platform with 262144 Kbytes of main memory

    Upgrade ROMMON initializedloadprog: bad file magic number:      0x0boot: cannot load "flash:"

    System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2008 by cisco Systems, Inc.

    C880 platform with 262144 Kbytes of main memory

    Upgrade ROMMON initialized

    ==============================================================

    rommon 1 System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2008 by cisco Systems, Inc.

    C880 platform with 262144 Kbytes of main memory

    Upgrade ROMMON initializedloadprog: bad file magic number:      0x0boot: cannot load "flash:"

    System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2008 by cisco Systems, Inc.

    C880 platform with 262144 Kbytes of main memory

    Upgrade ROMMON initialized

    Thank you

    Pat

    DB:2.64:Cisco 888 Keeps Booting Into Rommon xp


    Thank you that has Answered, it has worked.. urghhhh thank yo again for all the help./

  • RELEVANCY SCORE 2.64

    DB:2.64:Lms 3.1 /Lms Portal 7f



    Hello,

    An upgrade has been done on the switch however the RME Software Summary has been not updated on the LMS Portal.

    Herefafter , see the detailed of the view and the reports sorted out.

    The report shows that the equipment is upgraded in 12.2.(53).

    The software summary don't mention this software .

    For me, a new discovery is necessary for showing the added software version.

    Richard


    DB:2.64:Lms 3.1 /Lms Portal 7f


    But if you run a new Inventory Collection, the UI reflects the proper version of code?  If so, that is expected.  If, however, after running a new Inventory Collection, RME still thinks the switch is running the older code, post the IC_Server.log.

  • RELEVANCY SCORE 2.64

    DB:2.64:Unsupported Device In Cw2000 - Rme 3.4 Idu 1.0 - Oid Not Listed On Cisco sd



    Have a device that was added. Can do SNMP pulls and the OID that comes back is:

    system.sysObjectID.0 : OBJECT IDENTIFIER:

    .iso.org.dod.internet.private.enterprises.cisco.ciscoProducts.502

    (Interpreted, this OID is: 1.3.6.1.4.1.9.1.502)

    I tried the OID translator on cisco.com and it does not have a 502.

    The system description was:

    system.sysDescr.0 : DISPLAY STRING- (ascii): Cisco Internetwork Operating

    System Software

    IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-IS-M), Version 12.1(14)E1,

    EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

    Anybody run into this?

    DB:2.64:Unsupported Device In Cw2000 - Rme 3.4 Idu 1.0 - Oid Not Listed On Cisco sd


    I did get a "sh tech" from the system and it shows that it is a Cat4506 - I did find that support for it was included in IDU 2.0.

    Thanks for the responses.

  • RELEVANCY SCORE 2.63

    DB:2.63:We Are Not Able To Up Grade Rme From 4.0.5 To 4.0.6 3d



    Hi tEAM

    PLEASE LET ME KNOW THE PROCEDURE OF up GRADING RME or CAMPUS MANGER OR DFM.

    I need exact procedure.what is diffence betwen software update or device update.

    ASA IS NOT SHOWING IN THE LIST OF RME.

    LMS version 2.6 and it is integrated with ACS.

    Regards

    Vaibhav

    DB:2.63:We Are Not Able To Up Grade Rme From 4.0.5 To 4.0.6 3d


    Yes, you must run the .exe to install RME 4.0.6. LMS will not run this for you.

  • RELEVANCY SCORE 2.63

    DB:2.63:Help On Sql 2005 Installation fd



    Microsoft SQL Server 2005 9.00.1399.06
    ==============================
    OS Version : Professional Service Pack 1 (Build 7601)
    Time : Thu Oct 04 16:11:53 2012

    USER-HP : The current system does not meet the minimum hardware requirements for this SQL Server release. For system requirements, see Hardware and Software Requirements, in the readme file or in SQL Server Books Online.
    USER-HP : Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features,
    install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL
    Server in Books Online.
    Machine : USER-HP
    Product : Microsoft SQL Server Setup Support Files (English)
    Product Version : 9.00.1399.06
    Install : Successful
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SQLSupport_1.log
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : Microsoft SQL Server Native Client
    Product Version : 9.00.1399.06
    Install : Successful
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SQLNCLI_1.log
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : Microsoft Office 2003 Web Components
    Product Version : 11.0.6558.0
    Install : Successful
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_OWC11_1.log
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : Microsoft SQL Server 2005 Books Online (English)
    Product Version : 9.00.1399.06
    Install : Successful
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_BOL_1.log
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : Microsoft SQL Server 2005 Backward compatibility
    Product Version : 8.05.1054
    Install : Successful
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_BackwardsCompat_1.log
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : SQLXML4
    Product Version : 9.00.1399.06
    Install : Successful
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SQLXML4_1.log
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : Workstation Components, Books Online and Development Tools
    Error : There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    --------------------------------------------------------------------------------
    Machine : USER-HP
    Product : Microsoft SQL Server 2005 Tools
    Product Version : 9.00.1399.06
    Install : Failed
    Log File : C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_Tools.log
    Error Number : 1603
    --------------------------------------------------------------------------------

    SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.

    Time : Thu Oct 04 16:14:41 2012

    List of log files:
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_Core(Local).log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SQLSupport_1.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SQLNCLI_1.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_OWC11_1.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_BOL_1.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_BackwardsCompat_1.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SQLXML4_1.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_Tools.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_Datastore.xml
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_.NET Framework 2.0.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_Core.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_.NET Framework 2.0 LangPack.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_.NET Framework Upgrade Advisor.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_.NET Framework Upgrade Advisor LangPack.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_.NET Framework Windows Installer.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_.NET Framework Windows Installer LangPack.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_Support.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_SCC.log
    C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0014_USER-HP_WI.log

    DB:2.63:Help On Sql 2005 Installation fd

    Hi dinabandhu_bag,
    From the error message, it indicates the current system hardware doesn’t support this SQL Server release, to install this SQL Server release, we need to upgrade the hardware. For more detail information about SQL Server 2005 installationrequirements,
    please refer to the following link:
    Hardware and Software Requirements for Installing SQL Server 2005:
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.90).aspx

    Allen Li
    TechNet Community Support

  • RELEVANCY SCORE 2.63

    DB:2.63:Glyphs Icon Not Shwoing In Firefox jd



    i am using the bootstrap 3.1 version for design my site and i use the glyphs icon classes. all browsers showing icon instead firefox.

    DB:2.63:Glyphs Icon Not Shwoing In Firefox jd



    Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?

    Can you attach a screenshot?

    http://en.wikipedia.org/wiki/Screenshot
    https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem

    Use a compressed image type like PNG or JPG to save the screenshot.

    If you see little boxes that show the hex code of the characters then those icons are probably supplied by a font that is downloaded from the server (@font-face)

    Make sure that you allow pages to choose their own fonts.

    Tools Options Content : Fonts Colors Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

    You can check the gfx.downloadable_fonts.enabled pref on the about:config page and make sure that it is set to true (if necessary double-click the line to toggle its value).

    http://kb.mozillazine.org/about:config

  • RELEVANCY SCORE 2.63

    DB:2.63:Licencing For Rme As Part Of Csm cf



    Dear all,

    we plan to purchase Cisco Security Manager in the Professional-50 version only, because currently we have less than 50 security devices. As far as we know RME is part of the bundle. We have about 200 ordinary routers and would like to manage them with RME. Does the limitation to 50 devices apply the the RME functions (like software and configuration management) as well or only to the security functions (such as configuring firewalls and IPS-devices) ? Thank you very much for your hints.

    DB:2.63:Licencing For Rme As Part Of Csm cf


    Thanks, has somebody a more concrete statement ?

  • RELEVANCY SCORE 2.63

    DB:2.63:System Bootstrap 13



    How do you upgrade the system bootstrap on a 2620? I have a router w/ System BootStrap Version 11.3(2)XA4 and another w/ System Bootstrap 12.1(3R)T2.

    Where do I find the software at?

    DB:2.63:System Bootstrap 13


    Thank you for the information.

  • RELEVANCY SCORE 2.63

    DB:2.63:Why Inventory Never Collected In Rme. kj



    I use LMS 2.5 and RME 4.0.3

    but i can't collect data from only device.

    cisco WS-C6509-E (R7000) processor (revision 1.2)

    IOS:IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SX

    How to solve this problem.

  • RELEVANCY SCORE 2.63

    DB:2.63:Rme Config Issue Of C4990m d7



    Hi

    LMS Version 2.6

    RME Version 4.0.6

    we are facing RME config backup issue.

    Currnetly running IOS

    cat4500e-ipbasek9-mz.122-46.SG.bin

    Please find the error below for cisco C4900M

    CM0056 Config fetch failed for 10.108.133.11 Cause: CM0204 Could not create DeviceContext for 1103 Cause: CM0206 Could not get the config transport implementation for 10.108.133.11 Cause: UNKNOWN Action: Check if required device packages are available in RME. Action: Check if protocol is supported by device and required device package is installed.

    Regards

    Vaibhav

    DB:2.63:Rme Config Issue Of C4990m d7


    There is no support for a Catalyst 4990 in LMS. What is the exact sysObjectID of this device?

  • RELEVANCY SCORE 2.63

    DB:2.63:Rme 4.0.5 - Fwsm With Multiple Context - Config Archive zx



    Hi all

    Is it possible to make config archive from multiple context FWSM with RME in CiscoWorks?

    RME reports config archive successful and Debug has no errors. RME is successfully making config archive from one context and the system context. It seems not to notice the other contexts.

    The Device in question:

    Cisco Catalyst 6000 FWSM (Multiple Security Contexts)

    Current setup:

    LMS 2.6

    RME 4.0.5 + Catalyst 6000 IOS Switch Series Package.

    Any suggestions or ideas?

    Regards

    Andri

    DB:2.63:Rme 4.0.5 - Fwsm With Multiple Context - Config Archive zx


    There's a footnote on that:

    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_resource_manager_essentials/4.0.3/device_support/table/RME403SI.htm

    "5. After adding the device into the DCR, and whenever the device is switched between the Single and Multi Security Context Modes, the device should be deleted and added again into the DCR. This is due to change in the sysobjid and also because the number of configurations for the device varies when there is switching between the modes."

  • RELEVANCY SCORE 2.61

    DB:2.61:Boot Bootldr, Boot Bootstrap And Boot System Command? pm



    Hello All,

    Could anyone please explain me what the “boot bootldr” and “boot bootstrap” are? And how do they different from the “boot system” command?

    I did not understand the description of these commands in the Cisco command reference document.

    Thanks a lot,

    Nitass

    DB:2.61:Boot Bootldr, Boot Bootstrap And Boot System Command? pm


    Hi amit-singh,

    Ok, thank you very much.

    Thanks a lot,

    Nitass

  • RELEVANCY SCORE 2.60

    DB:2.60:Many Devices Are Partially Successful In Rme Config Management Summary mm



    Dear all,

    Many devices are partially successful in RME config management summary.It report error "CM0012: Unable to create new version on archive $1 Action: Check if disk space is available and directory has required permissions" How can i do?

    Thanks!

    DB:2.60:Many Devices Are Partially Successful In Rme Config Management Summary mm


    But we have so many devices,it is not been accepted that we delete them then re-add them.

    Anyone have other suggestion?

    Thanks!

  • RELEVANCY SCORE 2.60

    DB:2.60:How To Upgrade The Rom: System Bootstrap, Version? cm



    Dear All,

    I need to know how to upgrade the system bootstrap image on 6506-E with two rendundant sup32-ge-3b?

    Thanks Regards,

    Igor.

    DB:2.60:How To Upgrade The Rom: System Bootstrap, Version? cm


    Before upgrading Verify the minimum amount of DRAM, flash memory and Boot ROM version necessary for the new software release. Check whether your switch supports the requirements. Refer to Release Notes for Catalyst 6000/6500 Series Switches in order to verify the requirements for the new software image.

    Here is the link for Upgrade bootstrap image on 6500 series.

    http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_example09186a0080116ff0.shtml#req

  • RELEVANCY SCORE 2.60

    DB:2.60:Resource Manager Essentials (Rme) 4.0 Issues? sm



    We are upgrading our CiscoWorks VMS from v2.2 to v2.3 and also considering upgrading RME to version 4.0 or just patching RME3.5 to the latest patch(13).

    I don't see any related postings but has anyone had any issues/bugs with RME 4.0 yet?

    Thanks in advance!

    DB:2.60:Resource Manager Essentials (Rme) 4.0 Issues? sm


    One more thing I forgot to mention.

    After installing VMS 2.3, you will need to install fcs-rme3-5-vms2-3-update

    It is available at the following location:

    http://www.cisco.com/cgi-bin/tablebuild.pl/vms-3des

  • RELEVANCY SCORE 2.60

    DB:2.60:Router Will Not Bootup fk



    I have a 2801 router with ios c2801-ipvoice-mz.124-17b.bin with 1 vwic 1MFT-

    T1. It appears to be in a loop. I have tried doing a break sequence to access romon, but no luck. I have pasted the router's output.

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Systems, Inc.

    Correcting the primary nv_flash

    PLD version 0x10

    GIO ASIC version 0x127

    c2801 platform with 131072 Kbytes of main memory

    Main memory is configured to 64 bit mode with parity disabled

    Readonly ROMMON initialized

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Systems, Inc.

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/te

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Syste

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Systems, Inc.

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Sys

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisc

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cis

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Systems, Inc.

    PLD version 0x10

    GIO ASIC version 0x127

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Systems, Inc.

    PLD version 0x10

    GIO ASIC version 0x127

    System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

    Technical Support: http://www.cisco.com/techsupport

    Copyright (c) 2006 by cisco Systems, Inc.

    PLD version 0x10

    GIO ASIC version 0x127

    c2801 platform with 131072 Kbytes of main memor

    DB:2.60:Router Will Not Bootup fk


    Cisco overnighted a replacement router, which resolved the trouble.

  • RELEVANCY SCORE 2.60

    DB:2.60:No Available Tasks After Rme Db Reinitialization 8x



    Hello,

    We were getting a "TreeGenerator" error in NetConfig when trying to creat new jobs.  After come copious Googling, all we could think to do was reinit the RME db using "NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=rmeng dmprefix=RME"

    The error is gone so that seems to have fixed that issue but now there are no (system default) tasks in the "Available Tasks" window under "Assigning Tasks."

    We are running LMS 3.2 RME 4.3.1 on Windows 2003 Server platform.

    Any ideas?  Thanks.

    DB:2.60:No Available Tasks After Rme Db Reinitialization 8x


    You might want to move this thread to the Network InfrastructureNetwork Management community where they discuss LMS/RME.

    Scott

  • RELEVANCY SCORE 2.60

    DB:2.60:Analysis Of Failed Unit Exception Report - What Steps To Take? k7



    This is primarily directed at the Adtran folks and/or anyone who has had a similar problem where a TA900 loses its boot hint.

    Scenario:

    Customer has second generation TA924e which has been service for some time running R10.5.2. Unit is supplying PRI and analog lines from SIP trunk, not used for data. Customer called in this morning reporting all phones down, T1 lights red, box unresponsive. They tried power-cycling with no effect.

    I programmed a spare unit from RANCID backup and swapped it out. Customer back in service.

    Brought old unit back, on the bench it comes up in bootstrap# mode.

    TA924e (4242924L1)

    Executing bootstrap...

    ram: 134217728 bytes of RAM detected.

    Serial Number: CFG0610778

    Bootstrap version: 14.05.00.SA, checksum: F343, Thu Jun 21 13:58:08 2007

    vfs: NONVOL: 248 tracks, 128 sectors/track, 1024 bytes/sector.

    eth0/1: initializing...

    eth0/1: MAC address is 00:A0:C8:32:C9:26

    bootstrap: Checking boot configuration...

    bootstrap: Boot configuration not found.

    bootstrap: Upload a new image using the 'copy' command

    or specify the correct primary/backup images using the

    'boot system flash filename backup_filename' command.

    bootstrap: Error in boot configuration!!! Checking backup boot configuration.

    bootstrap: Boot configuration not found.

    bootstrap: Invalid boot configuration, entering bootstrap mode...

    cli: starting user interface

    Press '?' for help.

    bootstrap#

    bootstrap#sh ver

    Boot ROM version 14.05.00.SA

    Checksum: F343, built on: Thu Jun 21 13:58:08 2007

    Copyright (c) 1999-2007, ADTRAN, Inc.

    Platform: Total Access 924e, Part number 4242924L1

    Serial number CFG0610778

    Note that there isn't a boot hint.

    bootstrap#sh flash

    207599 exception-report-20140422214754

    15367 startup-config

    15401 startup-config.bak

    13802545 T900E2A-R10-5-2-E.biz

    14048895 bytes used, 17720160 available, 31769055 total

    Exception report from last night so the unit crashed...

    I tell it to boot from the image in flash:

    bootstrap#boot system flash T900E2A-R10-5-2-E.biz

    Primary image: NONVOL:/T900E2A-R10-5-2-E.biz

    Backup image: none

    bootstrap#boot

    bootstrap: Primary image is 'NONVOL:/T900E2A-R10-5-2-E.biz'.

    bootstrap: Booting 'NONVOL:/T900E2A-R10-5-2-E.biz'

    bootstrap: Reading 13802545 bytes of code, stand by...

    bootstrap: Inflating, stand by...

    .............................................................

    And all is now just fine. Power cycle unit, it is happy, boots consistently. But can I trust it, and what caused it to lose its boot configuration? Should I try to RMA the box? It's working fine now so probably not.

    What is the exception report file? I haven't tried to download or open it, is this the type of thing that Adtran support would want to see, or can mere mortals decipher it? Is there a hardware issue and can I trust this unit?

    DB:2.60:Analysis Of Failed Unit Exception Report - What Steps To Take? k7


    Replying again to my own post. Adtran support says that this is rare, usually caused by a voltage spike on either power or T1 lines. Per their advice I am going to erase flash and reload the AOS from TFTP. If trouble recurs it is likely defective flash memory but it has been fine on the bench so I'll consider it resolved. Still lots of time left on the fantastic 10-year warranty!

  • RELEVANCY SCORE 2.59

    DB:2.59:Cannot Delete Anything In Oracle Designer Version 10.1.2.4 Get Rme-02014 ks


    did not occur in version 10.1.2.3
    seems to be a new bug introduced in version 10.1.2.4

    fixed by:
    alter system set "_optimizer_cost_based_transformation"=off scope=both;

    see thread
    Does Designer 10g work on 11g

    DB:2.59:Cannot Delete Anything In Oracle Designer Version 10.1.2.4 Get Rme-02014 ks

    did not occur in version 10.1.2.3
    seems to be a new bug introduced in version 10.1.2.4

    fixed by:
    alter system set "_optimizer_cost_based_transformation"=off scope=both;

    see thread
    Does Designer 10g work on 11g

  • RELEVANCY SCORE 2.59

    DB:2.59:Device Unsupported Rme 4.2 xk



    in Manageability report, it shows that 6509 with sup720-3BXL is not supported. running version 12.(17d)SXB. In the support table shown at:

    http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.1/device_support/table/lms31sdt.html

    it shows that SUP 720-3BXL with minimum of 12.2(17a)SXA[RME] is supported in 4.1 RME. Am I missing something? the swithc chassis is 6509.

    DB:2.59:Device Unsupported Rme 4.2 xk


    You can get device package updates through Common Services Software Center Device Update.

  • RELEVANCY SCORE 2.59

    DB:2.59:Sql Server 2005 Express - Cannot Install a8


    I have tried to download SQL Server 2005 Express from Disc 2 of Office Ultimate 2007 several times and it keeps failing.  I have received the following information in the log.  What do I do to resolve this problem.
     
     
    Microsoft SQL Server 2005 9.00.3042.00 ============================== OS Version      : Microsoft Windows XP Professional Service Pack 2 (Build 2600) Time            : Tue Apr 22 15:39:58 2008  Machine         : WHEELER-LAPTOP Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.3042.00 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SQLSupport_1.log -------------------------------------------------------------------------------- Machine         : WHEELER-LAPTOP Product         : Microsoft SQL Server Native Client Product Version : 9.00.3042.00 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine         : WHEELER-LAPTOP Product         : Microsoft SQL Server VSS Writer Product Version : 9.00.3042.00 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SqlWriter_1.log -------------------------------------------------------------------------------- Machine         : WHEELER-LAPTOP Product         : MSXML 6.0 Parser (KB933579) Product Version : 6.10.1200.0 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_MSXML6_1.log -------------------------------------------------------------------------------- Machine         : WHEELER-LAPTOPProduct         : SQL Server Database ServicesError           : SQL Server Setup cannot write system databases to c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\, because it contains files from a previous installation. To continue, move the databases from the specified folder, or specify a different installation folder. Then run SQL Server Setup again.--------------------------------------------------------------------------------Machine         : WHEELER-LAPTOPProduct         : SQL Server Database ServicesError           : SQL Server Setup cannot write system databases to c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\, because it contains files from a previous installation. To continue, move the databases from the specified folder, or specify a different installation folder. Then run SQL Server Setup again.--------------------------------------------------------------------------------Machine         : WHEELER-LAPTOP Product         : Microsoft SQL Server 2005 Express Edition Product Version : 9.1.2047.00 Install         : Failed Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SQL.log Last Action     : DetectExistingData Error String    : SQL Server Setup cannot write system databases to c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Data\, because it contains files from a previous installation. To continue, move the databases from the specified folder, or specify a different installation folder. Then run SQL Server Setup again. Error Number    : 28111 --------------------------------------------------------------------------------
     SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
    Time            : Tue Apr 22 15:41:51 2008
    List of log files: c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_Core(Patched).log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SQLSupport_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SQLNCLI_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SqlWriter_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_MSXML6_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SQL.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_Datastore.xml c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_.NET Framework 2.0.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_Support.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_Core.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0006_WHEELER-LAPTOP_SCC.log

  • RELEVANCY SCORE 2.59

    DB:2.59:4006 Serial Number Question 97



    We have a CAT 4006 that seems to be reporting serial number contrary to what I have seen documented. Here is a screen print of the show version. Notice that the Serial number reported is the same serial number reported on the first line of modules. I understand that the Serial number that is reported in the line that contains the Model number should be the Serial number of the chassis. Anybody run into this and what the fix will be? I'm new to CAT OS devices and have not been able to find the corresponding SNMP-SERVER CHASSISID command that exists in the IOS world.

    Incidently I need to dump this information from RME 3.4 using DEE to create a CSV for upload into Remedy if anyone is wondering why I need the chassis serial number.

    Thanks for the help

    Randy Moore

    NOVA Chemicals

    WS-C4006 Software, Version NmpSW: 6.1(2)

    Copyright (c) 1995-2001 by Cisco Systems, Inc.

    NMP S/W compiled on Jan 25 2001, 14:04:40

    GSP S/W compiled on Jan 25 2001, 11:49:56

    System Bootstrap Version: 5.4(1)

    Hardware Version: 1.2 Model: WS-C4006 Serial #: JAB04290BMG

    Mod Port Model Serial # Versions

    --- ---- ---------- -------------------- -----------------------

    1 2 WS-X4013 JAB04290BMG Hw : 1.2

    Gsp: 6.1(2.0)

    Nmp: 6.1(2)

    2 34 WS-X4232-L3 JAB0517082F Hw : 1.6

    3 48 WS-X4148-RJ JAE04420405 Hw : 2.3

    4 48 WS-X4148-RJ JAE04430202 Hw : 2.3

    DB:2.59:4006 Serial Number Question 97


    The bug details can be seen on CCO at

    http://www.cisco.com/cgi-bin/bugtool/onebug.pl?bugid=CSCdt53447

    6.3(3) and later has a fix. If you are upgrading 6.4(2) should be the way to go. Make sure you read the release notes for known issues

  • RELEVANCY SCORE 2.58

    DB:2.58:2500 Cant Support 16m Flash ?????? c7



    i have a old Router 2501,it just support 8M flash(4M*2).16M flash (8M*2) could not work.

    someone told me the router's bootstrap too old.(System Bootstrap, Version (3.3)),

    so how upgrage the bootstrap to support 16M flash(8M*2).

    who can tell me,thx

    DB:2.58:2500 Cant Support 16m Flash ?????? c7


    Hello,

    you need to install the Boot ROM upgrade, the part number is BOOT-2500=. You can order the upgrade from Cisco...

    Regards,

    GP

  • RELEVANCY SCORE 2.58

    DB:2.58:Asa Is Not Showin Showing In The List Of Rme fp



    Hi

    we are facing an issue with ASA

    as it is no showing in RME list the curent version for RME is 4.0.5 which

    supports ASA. when we are installing package for ASA FROM DEVICE UPDATE . IT IS GENERATING ERROR. PLSE FIND THE SCREEN SHOT FOR THE SAME.

    Regards

    Vaibhav

    DB:2.58:Asa Is Not Showin Showing In The List Of Rme fp


    Your RME package repository is bad. You are missing some packages which should have been installed during the various RME updates. This most typically happens on Windows. The safest course of action is to backup LMS, uninstall it, and reinstall it from scratch after doing the following:

    * Set the TEMP and TMP environment variables to short values (e.g. C:\WINDOWS\TEMP).

    * Disable anti-virus software and Windows Data Execution Protection.

    * Login as a local Administrator on the server's console.

    * Install from locally attached original media.

    After LMS is reinstalled and repatched, you can restore your backup.

    There are other, more tactical procedures to try and restore missing or outdated packages, but you will need to contact the TAC, and have them walk you through them. Whatever you decide to do, moving forward, make sure you have set the TEMP and TMP environment variables as I described above, and make sure you disable DEP. You can run with anti-virus software enabled, but disable it whenever you do a patch installation.

  • RELEVANCY SCORE 2.58

    DB:2.58:Rme Config Compare Error j7



    Hello, I've found following bug in RME 3.4:

    After adding one line to config of my Cat2900XL running IOS 12.0(5)WC5a I updated the configuration archive and tried to compare with the config previous version.

    But RME didn't notice the config change!!

    When I display the latest config via Device Configuration Viewer, I see the new line.

    But when trying Compare with Prev. Version the Configuration Compare Report Diffs Only screen doesn't show it.

    Even the All screen doesn't show it!!

    No difference using Processed or Raw showing.

    The config change was:

    line vty o 15

    exec-timeout 30 0

    This is not an important config change but the error makes the config compare process unreliable to me.

    Has anybody noticed anything similar?

    Regards,

    Milan

    DB:2.58:Rme Config Compare Error j7


    Hi,

    this is not the problem - I'm keeping 10 config copies up to 180 days.

    To clarify the problem:

    I see the correct config via RME - Configuration Management - Compare configurations - 2 versions of same device - select device - click on View for the latest config - the new line is there

    BUT

    when I clik on Compare with Prev version button

    I see both config version paralelly, I can see other differences, but the line

    exec-timeout 30 0

    disappears from the latest config column!!!

    Regards,

    Milan

  • RELEVANCY SCORE 2.58

    DB:2.58:Old Devices In Ciscoworks Rme ck



    I'm using LMS2.6. RME is version 4.06. I have a number of devices show up in my reports that no longer exist. I can't delete them as they don't appear in the DCR. When I try to add them back in, I get an error saying they already exist.

    Can someone please tell me where I can delete these old devices?

    Thanks!

    DB:2.58:Old Devices In Ciscoworks Rme ck


    I have finally found the answer after hunting high and low.

    https://supportforums.cisco.com/thread/174743.pdf

    Once I added the devices into ACS, they appeared in my DCR so now they can be deleted

  • RELEVANCY SCORE 2.58

    DB:2.58:I Have A Simular Problem As Clay.Routh, Can You Help Me Please? 13


    Here is my sumary.txt log file from SQL Express.
     
    Microsoft SQL Server 2005 9.00.2047.00 ============================== OS Version      : Microsoft Windows XP Home Edition Service Pack 2 (Build 2600) Time            : Sun Aug 27 08:16:07 2006  HOME-D84394AF4F : Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features.  Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.Machine         : HOME-D84394AF4F Product         : Microsoft SQL Server Setup Support Files (English) Product Version : 9.00.2047.00 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SQLSupport_1.log -------------------------------------------------------------------------------- Machine         : HOME-D84394AF4F Product         : Microsoft SQL Server Native Client Product Version : 9.00.2047.00 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SQLNCLI_1.log -------------------------------------------------------------------------------- Machine         : HOME-D84394AF4F Product         : Microsoft SQL Server VSS Writer Product Version : 9.00.2047.00 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SqlWriter_1.log -------------------------------------------------------------------------------- Machine         : HOME-D84394AF4F Product         : MSXML 6.0 Parser Product Version : 6.00.3883.8 Install         : Successful Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_MSXML6_1.log -------------------------------------------------------------------------------- Machine         : HOME-D84394AF4FProduct         : SQL Server Database ServicesError           : SQL Server Setup cannot write system databases to c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Template Data\, because it contains files from a previous installation. To continue, move the databases from the specified folder, or specify a different installation folder. Then run SQL Server Setup again.--------------------------------------------------------------------------------Machine         : HOME-D84394AF4F Product         : Microsoft SQL Server 2005 Product Version : 9.1.2047.00 Install         : Failed Log File        : c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SQL.log Last Action     : DetectExistingData Error String    : SQL Server Setup cannot write system databases to c:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Template Data\, because it contains files from a previous installation. To continue, move the databases from the specified folder, or specify a different installation folder. Then run SQL Server Setup again. Error Number    : 28111 --------------------------------------------------------------------------------
     SQL Server Setup failed. For more information, review the Setup log file in %ProgramFiles%\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt.
    Time            : Sun Aug 27 08:19:34 2006
    List of log files: c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_Core(Local).log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SQLSupport_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SQLNCLI_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SqlWriter_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_MSXML6_1.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SQL.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_Datastore.xml c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_.NET Framework 2.0.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_Support.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_Core.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Summary.txt c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_SCC.log c:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0011_HOME-D84394AF4F_WI.log
    Thanks in advance.
    By the way I'm a total newbie to programming so can you keep to the lay mans terms, please.
    Hugh Fraser

    DB:2.58:I Have A Simular Problem As Clay.Routh, Can You Help Me Please? 13

    I had the same error message when trying to load Windows for small business 2007-disk 2, which contained outlook business manager and accounting.  I was using the 2007 beta and when I removed it I had problems installing my new purchased 2007 package. 
    I did what was refered to by, removing files from SQL folder and placing them in a temp folder just in case there was a problem.  Once I removed the folders from the SQL folder my manager and accounting loaded fine.  What should I do with the files that I moved?  Should I delete them?  Thank you, very much!

  • RELEVANCY SCORE 2.58

    DB:2.58:Error In Rme Config Archive Lms 3.2 k8



    I am getting following error for the wireless controllers In RME Collection Status Config Archive Failed devices. RME Version is 4.3.1

    "fig from device: java.net.SocketTimeoutException: Read timed out fig from device: java.net.SocketTimeoutException: Read timed out"

    DB:2.58:Error In Rme Config Archive Lms 3.2 k8


    According to this, your WLC is running code greater than or equal to 5.2, and you may need to increase your telnet timeout in order to fetch the entire config.  Go to RME Devices Device Management RME Devices, and the edit the device attributes for this device.  Increase the telnet timeout to 72 seconds (you may need to go higher, but start there).  Save and apply your changes, then try the Sync Archive job again.

  • RELEVANCY SCORE 2.58

    DB:2.58:Lms 3.2/Rme: Auto Backup All Contexts In Asa? p7



    Is it possible to have RME automatically detect and backup all contexts in an ASA? RME seems to be able to do this for the ACE4710, and RME is backing up both the admin context and system config. In the Raw view the admin context shows up as #BEGIN_MODULE_CONFIG.

    I'd like to have RME backup all contexts automatically without me having to add them as seperate devices and open up access etc.

    DB:2.58:Lms 3.2/Rme: Auto Backup All Contexts In Asa? p7


    This is not possible.  RME requires each context to be added as a separate device.  A enhancement request was opened for supporting this without adding each indivudual context (see CSCsl65838).

  • RELEVANCY SCORE 2.58

    DB:2.58:Cisco Clean Access And Rme cp



    Is Cisco Clean Access manager supported in RME?

    DB:2.58:Cisco Clean Access And Rme cp


    There are currently no plans to add support for this device. This is the first I've heard of someone requesting it.

  • RELEVANCY SCORE 2.57

    DB:2.57:Cisco Security Manager 4.3 (Csm 4.3) Rme And Pm fc



    Couple questions regarding newest version of CSM 4.3:

    - Is RME part of CSM 4.3 (info from Data sheet) or not (info from Release notes and Installation guide)?  If RME is not part of CSM 4.3,  how functionalities like Inventory and Configuration collection and archiving should be done in new version?- Is Health and Performance Monitoring added functionality instead of Performance monitor (MCP)?

    Thanks in advance.

    DB:2.57:Cisco Security Manager 4.3 (Csm 4.3) Rme And Pm fc


    RME is no longer part of CSM as of version 4.3. CSM 4.3 relies on Common Services 4.0 similar to how Cisco Prime LMS does.

    Yes HPM is the new product component for those features formelry found in MCP plus new ones introdcued in CSM 4.3.

  • RELEVANCY SCORE 2.57

    DB:2.57:Rme Not Archiving Some Devices m9



    Hi folks,

    IN RME it is showing some devices failed and giving following error"TELNET: failed to establish TELNET connection to 192.168.100.113 - Cause: Authentication failed on device 3 times. PRIMARY-STARTUP config Fetch Operation failed for TFTP. Unable to create a socket to /192.168.100.113". Plz help me out wht shld i do?? As it is not fetching configuration of some devices. sothat all device will be in archive.

    DB:2.57:Rme Not Archiving Some Devices m9


    Yes, the read-write community string is needed to do any kind of config fetch operation via SNMP.

  • RELEVANCY SCORE 2.57

    DB:2.57:Ios Upgrade Through Rme pm



    Hi

    I am using Cisco Works 2.6, RME 4.0.5 and want to upgrade the IOS of a WS-C3750-24TS-E switch. I have downloaded the IOS "c3750-advipservicesk9-mz.122-25.SEE4.bin" from cisco and added it to software repository through rme-software mgmt-software repository-add.

    Now I selected the IOS and selected update status after which the IOS status changed to "not deffered".

    Now to upgrade the ios on switches,which are detected as "Cisco 3750 Stack " , chossing software distribution - by image . Then selecting the same IOS and device from select image and device window. after selecting next it shows me device name , module information and storage option properly. On the next step in verification window I am getting the following errors in verification details...

    ---------------------------------

    testsw

    ---------------------------------

    File_Name : /c3750-i5-mz.121-19.EA1d.bin

    File_Size : Unknown

    Family : C3750

    Version : 12.1(19)EA1d

    BOOTROM : Bootstrap program is C3750 boot loader

    RAM : 134209536

    Feature : LAYER_3|MIN_DRAM_MEG=64

    Media : RAM

    Image_Type : SYSTEM_SW

    Software_Name : C3750-I5-M

    SOURCE : flash:

    UPGRADETYPE : ACTIVE

    Flash Information

    ---------------------------------

    Flash Name : flash

    Flash Size : 15991309

    Flash Free : 11938304

    Verification Errors And Warnings

    -----------------------------------------------------------------------------------------------------

    SWIM1063: Minimum RAM requirement of the selected image cannot be determined.

    RAM available on the device may not be enough to activate this image.

    Update the minimum RAM value using View/Edit Image attributes or

    make sure that the device has enough RAM to activate the selected image or select a different image.

    SWIM1110: .bin images are not supported for Stack Upgrade.

    Select a tar image for Stack Upgrade.

    Pls let me know where I am wrong and what exact I have to do the upgrade IOS.

    DB:2.57:Ios Upgrade Through Rme pm


    Thanks sven..

    well I resolved the problem . It was only because of that .tar format image. I had downloaded that from cisco site and upgraded the IOS of that switch.

  • RELEVANCY SCORE 2.57

    DB:2.57:Ios Versions On A 1720 p1



    Hi All,

    I have a cisco 1720 and I just upgraded its IOS to 12.2(37)

    When I do a "sh ver", in the top of the output it shows the new version, but somewhere in the bottom, it shows

    ROM: System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1)

    I would love to know if I messed up in the upgrade, or if this System Bootstrap version has to do with something else and it's something I shouldn't worry?

    please help

    DB:2.57:Ios Versions On A 1720 p1


    Hi,

    I'm not aware of any features out there that need an activation key. You pay for features by buying the appropriate feature set which you have done already. So the bottom line is that if you have got a feature set that supports a particular feature, you should be able to configure it.

    Paresh

  • RELEVANCY SCORE 2.57

    DB:2.57:Rme Config Management For Catos kk



    Is there a way to only capture non-default config for CAT OS devices in

    /var/adm/CSCOpx/files/archive/shadow/Cisco_Catalyst_Switch

    what I see that it has default and non-default both in there. I know this one was not fixed in previous RME version but is it available in RME 3.5 or 4.0?

    Thanks.

    DB:2.57:Rme Config Management For Catos kk


    It still shows the entire config in RME 3.5 and 4.0

    I don't think there is an easy way to get simply non-default

  • RELEVANCY SCORE 2.57

    DB:2.57:Software Distribution To Catalyst 2980 From Rme mk



    I am trying to distribute a software image to a 2980. I am getting an error message when I try to select a device to push the software to. The error message is

    User Error: Invalid value entered for NGRP software version. Recommended Action: Enter a value in the format a.b(c) AA e(f).

    RME version 3.4

    DB:2.57:Software Distribution To Catalyst 2980 From Rme mk


    No. I have not contacted TAC. I will be doing that today

  • RELEVANCY SCORE 2.57

    DB:2.57:Cisco 7600 Issue In Router Bgp Network No Mask Is Showing jp



    ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)BOOTLDR: Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRE7a, RELEASE SOFTWARE (fc1)

    router bgp 55879 bgp router-id 115.248.114.229 bgp cluster-id 1945669861 bgp log-neighbor-changes neighbor 115.248.144.230 local-as 45415 neighbor 124.155.244.241 remote-as 55879 ! address-family ipv4  no synchronization  network 124.155.240.0 mask 255.255.255.0  network 124.155.242.0 mask 255.255.255.0  network 124.155.243.0 mask 255.255.255.0  network 124.155.244.0 mask 255.255.255.0  network 124.155.245.0 mask 255.255.255.0  network 124.155.246.0 mask 255.255.255.0  network 124.155.247.0 mask 255.255.255.0  network 124.155.248.0 mask 255.255.255.0  network 124.155.249.0 mask 255.255.255.0  network 124.155.250.0 mask 255.255.255.0  network 124.155.251.0 mask 255.255.255.0  network 124.155.252.0 mask 255.255.255.0  network 124.155.253.0 mask 255.255.255.0  network 124.155.254.0 mask 255.255.255.0  network 124.155.255.0 mask 255.255.255.0  network 202.179.86.0  network 202.179.87.0  network 202.179.89.0  network 202.179.90.0

    Please help

     

     

    DB:2.57:Cisco 7600 Issue In Router Bgp Network No Mask Is Showing jp


    Mikael,

     

    Thanks a lot. i got it. its working now.

    Mahendra

  • RELEVANCY SCORE 2.57

    DB:2.57:Show Version And Show Flash Output On Router fz



    Hi every body!

    I have few question:

    show version ( i omitted the output for brevity)

    ---------------

    ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE

    BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWAR

    E (fc1)

    1) To me it appears that"ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE" show the bootstrap version if yes then what does"BOOTLDR: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWAR

    E (fc1)" indicate ?

    -----------------------------------------

    "cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory"

    1)The memory in above means RAM?

    2) What does" 16384k/2048k" indicate?

    ----------------------------------------

    show flash:

    RouterA#show flash

    System flash directory:

    File Length Name/status

    1 7923420 c2500-i-l.121-9.bin

    [7923484 bytes used, 465124 available, 8388608 total]

    8192K bytes of processor board System flash (Read ONLY)

    The" 8388608" indicates the total flash size, but then what does " 8192k" indicate?

    --------------------------------------

    thanks a lot!

    DB:2.57:Show Version And Show Flash Output On Router fz


    The first value, Main Processor memory, is either:

    •The amount of DRAM available for the processor, or

    •The total amount of DRAM installed on the system.

    The second value, Packet memory, is either:

    •The total physical input/output (I/O) memory (or "Fast memory") installed on the router (Cisco 4000, 4500, 4700, and 7500 series), or

    •The amount of "shared memory" used for packet buffering. In the shared memory scheme (Cisco 2500, 2600, 3600, and 7200 Series), a percentage of DRAM is used for packet buffering by the router's network interfaces.

    Note The terms "I/O memory" or "iomem"; "shared memory"; "Fast memory" and "PCI memory" all refer to "Packet Memory". Packet memory is either separate physical RAM or shared DRAM.

    http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_s2.html#wp1466984

    __

    Edison.

  • RELEVANCY SCORE 2.57

    DB:2.57:Problem With Rme 4.0 8x



    RME 4.0 had no devices discovered in the database. it shows 0. But campus manager and DFM has the correct discovery information. tried patching RME to SP2 but didn't work. what could be the problem? and how can i fix?

    PS. LMS version we use is 2.5 and it's an upgrade that runs on Solaris 8.

    thanks

    regards

    DB:2.57:Problem With Rme 4.0 8x


    Are you running LMS 2.5 on one or a multi-box cluster ?

    If its a single box I'd suspect its a credentials problem. If a Multi-box, its a SSO common cluster ID mismatch.

  • RELEVANCY SCORE 2.57

    DB:2.57:Managing Syslog_Info In Rme 89



    Can anyone provide tips on how they manage their syslog_info file on RME under Solaris? My system has only been up for a month or so now and the file is 580MB. Thanks in advance.

    Erik

    DB:2.57:Managing Syslog_Info In Rme 89


    Within RME itself, you can eanble the policy of how many messages you want to keep upto x days. And can also enable the purge policy to delete them periodically. As for the syslog file on your solaris server itself, you may have some PIX which tend to send a large number if messages can can fill this up quickly. May want to tweak the syslog severity level on your devices as well.

  • RELEVANCY SCORE 2.56

    DB:2.56:Unable To Do Rme Config Backup In Lms 2.6 9c



    Dear Friends,

    We have Ciscoworks LMS 2.6 in our network and are currently facing a problem in RME doing a config backup of 4500 E-Chassis with Sup 6-E.

    All devices are showing up in blue in RME except the 4500E chassis. The 4500E chassis are showing up as black in RME. The IOS running is 12.2(50)SG.

    We tried installed all device update packages from Common Services--Device Update and choosing RME package for IOS4000. But it still did not work.

    Please find enclosed the screenshot that contains the versions of RME, Common Services and other products.

    Requesting for your kind help on this.

  • RELEVANCY SCORE 2.56

    DB:2.56:Rme Database Not Responding fz



    I have a pretty elderly Ciscoworks installation and after suffering from a corrupt database I am trying to build a new one on my Ciscoworks installation. I have, as advised,used the original files to create a new blank database into which I'm trying to import a CSV format inventory from another NMS but this is failing because the database is not responding. I want to check I have the correct login details in the System DSN setup in ODBC for this database. So, can anyone advise what the default dba passwrod is?

    RME version 3.2 and CD1 3rd Edition.

  • RELEVANCY SCORE 2.56

    DB:2.56:Archiving Catalyst 3020 Config With Lms Rme 4.0.5 c3



    all,

    I tried to managed with my LMS server Catalyst 3020 Blade switches for HP Blade System. On RME, 4.0.5, it's impossible to archiving configuration because devices are not supported despite that I upgraded CBC3000 packages to version 3. When I check on devices supported, it looks like this package install only required information for Catalyst 3030 3040 and nothing for catalyst 3020. See attachement.

    Does anyone have an idea?

    Thanks in advance.

    DB:2.56:Archiving Catalyst 3020 Config With Lms Rme 4.0.5 c3


    The 3020 Blade switches will be supported in February of this year.

  • RELEVANCY SCORE 2.56

    DB:2.56:Rme Version Tree Question cj



    I don't understand the way the config fetching works in RME. I choose the Sync Archive and mark the Fetch Startup Config checkbox. The configs are successfulle fecthed but later, when I browse the configs version tree I see several versions of Running Config and the only version of Starting Config for each device. I'd like to have a separate branch for keeping the starting config versions. Is it posible and is the previously described scheme normal for RME?

    DB:2.56:Rme Version Tree Question cj


    RME only archives one version of the startup config (the latest). This may change in RME 4.1, but currently, that is the expected behavior.

  • RELEVANCY SCORE 2.56

    DB:2.56:Essentialsdbmonitor And Cmfdbmonitor Fail After Install Rme 3.5 9d



    Hi all,

    The EssentialsDbMonitor and CmfDb monitor failed to run after I installed RME3.5. Tried to start them and got the following error message:

    {EssentialsDbMonitor}: Cannot connect to 'rme' database, please contact your system administrator.

    Also, the following entry is logged in the EssentialsDbMonitor.log:

    EssentialsDbMonitor {Mon Aug 16 11:20:03 2004} Running DbMonitor version 2.1

    EssentialsDbMonitor ERROR {Mon Aug 16 11:20:03 2004} SQLDriverConnect: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified; SqlState: IM002

    EssentialsDbMonitor WARNING {Mon Aug 16 11:20:03 2004} Failed to connect to database. Retry number = 1 of 5.

    ...

    Can anybody kindly help me? Thanks in advance!

    DB:2.56:Essentialsdbmonitor And Cmfdbmonitor Fail After Install Rme 3.5 9d


    Thanks for your kindly reply. Finally I figured out it's our corporation w2k image has restriction on user's privilege which prevent the process from running properly.

  • RELEVANCY SCORE 2.56

    DB:2.56:Lms32 Running Very Slow, Rme Services (Wintel) Showing Stopping. x8



    In the past few days I have had a very sluggish response on the platform.

    I am now getting errors when opening rme and or processes window.

    I checked the wintel srv08 services and all looks fine but the RME db service shows stopping, reboot does not help.

    Additionally SMTP alerts have stopped.

    Additionally I have a lot of what appears to be Java heap dumps dated over the past couple of weeks.

    Any heads up on any of the above?

    Thanks

    DB:2.56:Lms32 Running Very Slow, Rme Services (Wintel) Showing Stopping. x8


    If you've already opened a case, I would recommend you work that issue there.  If you need further help on the SR, you can always escalate.

  • RELEVANCY SCORE 2.55

    DB:2.55:Rme Views dd



    Is it possible to remove the system views from RME?

    Thanks.

  • RELEVANCY SCORE 2.55

    DB:2.55:Import From Rme To Ngenius a3



    Hi,

    I am trying to add the switches in RME into nGenius. I've followed the instruction in the online-help but when I execute nGeniusCiscoImport.bat I get errors like :

    [13:41:49]FileLoader:Error Inserting Cisco Switch Record: com.sybase.jdbc2.jdbc.SybSQLException: ASA Error -193: Primary key for table 'CISCO_SWITCH' is not unique

    [13:41:49]FileLoader:Error parsing line: 10.1.0.4,5 Feb 2003 23:00:37 EST,,"Cisco Internetwork Operating System Software

    [13:41:49]FileLoader:Error parsing line: IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE (fc1)

    [13:41:49]FileLoader:Error parsing line: Copyright (c) 1986-2002 by cisco Systems, Inc.

    I'm using RME 3.4 and nGenius 1.4.

    What's the problem here ?!

    Thx

    Marc Ferland

    CS Student

    University of Sherbrooke

  • RELEVANCY SCORE 2.55

    DB:2.55:Config Archive Date In Cw Rme 4.0.4 xf



    How to see Date of each config archive in RME 4.0.4

    DB:2.55:Config Archive Date In Cw Rme 4.0.4 xf


    That should always show the latest configuration archive. There is a bug which is fixed in the recently posted LMS 2.6 that may prevent that, however. Given that the config viewed from Device Center in the latest revision, you can use the Device Center field:

    Configuration Last Archived Time

    To determine the date of the configuration in question.

  • RELEVANCY SCORE 2.55

    DB:2.55:4006 Ios Upgrade k3



    Hi i have a  WS-C4006

    switch.It has
    IOSCAT
    {System Bootstrap Version: 5.4(1)}.I need to upgrade CATIOS in to ciscoIOS.Can anybody give me the steps???

    thx

    DB:2.55:4006 Ios Upgrade k3


    HI Team,

    even i am running the IOS "cat4000-k9.8-4-11-GLX.bin" on the device WS-c4506.......

    I am trying to initiate a command "set port broadcast  " but unable to execute the same......

    can anybody suggest any alternate command ?

    "sh version"

    WS-C4506 Software, Version NmpSW: 8.4(11)GLXCopyright (c) 1995-2006 by Cisco Systems, Inc.NMP S/W compiled on Apr 27 2006, 12:46:44GSP S/W compiled on Apr 27 2006, 11:47:52

    System Bootstrap Version: 6.1(5)

    Hardware Version: 5.1  Model: WS-C4506  Serial #: FOX07190054

    Mod Port Model              Serial #              Versions--- ---- ------------------ -------------------- ---------------------------------1   2    WS-X4013           JAE07190RLS          Hw : 5.1                                                 Gsp: 8.4(11.0)                                                 Nmp: 8.4(11)GLX2   48   WS-X4148-RJ        JAE07220WV3          Hw : 3.13   48   WS-X4148-RJ        JAE07220XW7          Hw : 3.14   48   WS-X4148-RJ        JAE07220XS9          Hw : 3.15   48   WS-X4148-RJ        JAE07220XQ3          Hw : 3.1

           DRAM                    FLASH                   NVRAMModule Total   Used    Free    Total   Used    Free    Total Used  Free------ ------- ------- ------- ------- ------- ------- ----- ----- -----1       65536K  41377K  24159K  16384K   5930K  10454K  480K  399K   81K

    Uptime is 80 days, 19 hours, 30 minutes

    "sh module"

    ****************** show module ******************

    Mod Slot Ports Module-Type               Model               Sub Status--- ---- ----- ------------------------- ------------------- --- --------1   1    2     1000BaseX Supervisor      WS-X4013            no  ok2   2    48    10/100BaseTx Ethernet     WS-X4148-RJ         no  ok3   3    48    10/100BaseTx Ethernet     WS-X4148-RJ         no  ok4   4    48    10/100BaseTx Ethernet     WS-X4148-RJ         no  ok5   5    48    10/100BaseTx Ethernet     WS-X4148-RJ         no  ok

    Mod Module-Name          Serial-Num--- -------------------- --------------------1                        JAE07190RLS         2                        JAE07220WV3         3                        JAE07220XW7         4                        JAE07220XS9         5                        JAE07220XQ3        

    Mod MAC-Address(es)                        Hw     Fw         Sw--- -------------------------------------- ------ ---------- -----------------1   00-0d-28-22-c1-40 to 00-0d-28-22-c1-7f 5.1    6.1(5)     8.4(11)GLX2   00-0c-30-7e-b7-90 to 00-0c-30-7e-b7-bf 3.1   3   00-0c-ce-ef-15-f0 to 00-0c-ce-ef-16-1f 3.1   4   00-0c-ce-ef-18-90 to 00-0c-ce-ef-18-bf 3.1   5   00-0c-30-7e-b5-50 to 00-0c-30-7e-b5-7f 3.1  

  • RELEVANCY SCORE 2.55

    DB:2.55:Config Backups, Vg248s With Rme 77



    I dont see it listed in the supported devices table, but does any version of RME support config backups of VG248's?

    DB:2.55:Config Backups, Vg248s With Rme 77


    thanks, i figured as much since they do not run IOS

  • RELEVANCY SCORE 2.55

    DB:2.55:Syslog In Rme 4.0 d7



    Running RME 4.0 and using the automated function in syslog. Originally, in RME 3.5, a sampleEmailscript.pl was available that could be used to send mail out with the error message in the subject. With the new version, I haven't seen a way to do that under the email setting. Has anyone else found a way to?

    DB:2.55:Syslog In Rme 4.0 d7


    It will now send the entire error message as part of the body of the e-mail by default. There is no way that I have found to include the error in the subject. I have contacted Cisco TAC with several suggestions about how to improve the syslog displays and the e-mail automated action and the tech I was in contact with was close to the developers and insured me that my suggestions would get passed along for consideration.

  • RELEVANCY SCORE 2.55

    DB:2.55:Lms 2.6 Rme Collection Status z9



    In the RME collection status partially successfull config archive; some hosts are showing errors which read as follows:

    " CM0012: Unable to create new version $1 Action: check if disk space is available and directory has required permissions "

    The units in question have the same disk space as other units of the same type with the same permissions and are not showing this error I am comparing the flash dir. where else should I look to determine what the problem may be. cisco3650,and cisco3750 type devices

    Byron

    DB:2.55:Lms 2.6 Rme Collection Status z9


    The CM0012 error is most likely caused by CSCsh39475. A patch is available on Cisco.com at http://www.cisco.com/cgi-bin/tablebuild.pl/cw2000-rme .

    If, after applying this patch, you are still seeing errors, you should enable ArchiveMgmt debugging under RME Admin System Preferences Loglevel Settings, reproduce the problem, then look at the dcmaservice.log for errors

  • RELEVANCY SCORE 2.55

    DB:2.55:Rme Question x8



    Question,

    I recently upgraded our Ciscoworks LMS to version 2.6. Our system at the time only had 2 GB of ram installed. While reading the readme for the installation of the patch, it stated

    The following message appears:

    Do you want to tune RME to better utilize the available system

    resources, and improve performance ?

    Select Yes, to tune the performance parameters of RME towards the end

    of installation.

    Select No, to continue running RME using the existing default

    performance parameters.

    If you select No, you can tune the parameters later by running the

    rmeptt CLI utility.

    See the "Performance Tuning Tool" section of RME User Guide for

    details.

    The above message appears only if you have installed the update for RME, have

    a minimum of 4 GB RAM, and dual CPU.

    My question is, how do I tune RME now that I have updated the system to have 4GB or ram now.

    Thanks