• RELEVANCY SCORE 4.01

    DB:4.01:Cant Connect To Directv My Wpa Password Is Too Long? zk





    I have WPA setup for my wireless security. Everything is set up great except my hr22 HD DVR. I can get as far as the security code input screen, and i can get about half the code in, than i cant enter anymore. It just beeps at me. Is there any other way to set up this or what? What am i doing wrong? All my other devices set up just fine with my code (PC, PS3 And xbox360)

    Any help greatly appreciated!

    DB:4.01:Cant Connect To Directv My Wpa Password Is Too Long? zk

    I can see my SSID and i try to log on. When i go to log on to it, it ask fors the security key. I enter the key, but it stops about half way through my key and just beeps at me like its out of room to enter any more numbers/letters. Is there a maximun lengh key that i can use? Im using WPA with a router configured key, and that key has worked just fine in all my other devices, printer PS3 and xbox 360.

  • RELEVANCY SCORE 3.27

    DB:3.27:Connecting Guest To Access Points Using Wpa 1d





    Hi all

    is it possible to get my wireless clients to connect without a wpa password, for guest logins ?

    DB:3.27:Connecting Guest To Access Points Using Wpa 1d


    If you want the traffic encrypted you will need to use a key of some sort, whether its EAP authentication or a PSK.

  • RELEVANCY SCORE 3.26

    DB:3.26:Cant Connect To Wpa Network fs




    I have a Dell Precisioin T3400 computer running XP with Service Pack 3. It has a Dell 1505 wireless network card. I’m trying to connect to a network with WPA Personal security. When I go to Network Connections, it sees the network and recognizes that it’s
    using WPA, but I can’t connect to it. I enter the password and it tries to connect but doesn’t. I’m sure the password is right because other computers (Windows 7 and Mac) connect with no problem. Any idea what could be causing this? I thought Service Pack
    3 could handle WPA and WPA2.

    DB:3.26:Cant Connect To Wpa Network fs

    Hi,
    I would suggest you to refer these methods:
    Method 1:
    You may try updating your Network card and check if it works.
    http://support.microsoft.com/kb/283658

    Method 2:
    You may also try uninstalling and reinstalling the Network card drivers.
    http://support.microsoft.com/kb/283658

  • RELEVANCY SCORE 3.18

    DB:3.18:Crowdsupport md



    someone help me out here please ive been trying to figure out what my wifi or wpa password is so i can connect to the internet with my ps3 but i have no idea what the password is and everything i try it never works! help me out anyone please??

    DB:3.18:Crowdsupport md


    ok never mind that ive got the password to the wifi but the ps3 sais it cant obtain the ip adress now? even though its still the 192.168.1.101?

  • RELEVANCY SCORE 3.18

    DB:3.18:Cannot Conect To Speedtouch Router Using Wpa ss


    I have a SpeedTouch router which supports WEP and WPA encryption. Whenever I try to connect using WPA using my iMac, I get a consistent "Invalid Password" message, or I am prompted for my password over and over. Sometimes, the message is "Connection time exceeded". I'm positive the password is correct. I solved this problem by switching to WEP, which works fine (it always accept the password). A laptop PC connects using WPA with no problem. The version of the Airport Utility is 5.4.2

    I've tried the solutions proposed at http://discussions.apple.com/thread.jspa?messageID=11036144#11036144 and http://discussions.apple.com/thread.jspa?messageID=10955939#10955939 but neither of them seems to work.

    I would appreciate any suggestions

    DB:3.18:Cannot Conect To Speedtouch Router Using Wpa ss

    I have a SpeedTouch router which supports WEP and WPA encryption. Whenever I try to connect using WPA using my iMac, I get a consistent "Invalid Password" message, or I am prompted for my password over and over. Sometimes, the message is "Connection time exceeded". I'm positive the password is correct. I solved this problem by switching to WEP, which works fine (it always accept the password). A laptop PC connects using WPA with no problem. The version of the Airport Utility is 5.4.2

    I've tried the solutions proposed at http://discussions.apple.com/thread.jspa?messageID=11036144#11036144 and http://discussions.apple.com/thread.jspa?messageID=10955939#10955939 but neither of them seems to work.

    I would appreciate any suggestions

  • RELEVANCY SCORE 3.12

    DB:3.12:Cant Connect To A Particular Wpa-Psk With Dw1520 Wireless-N Wlan, But Can When No Security Is Set On Wireless How Can I Get Card To Use Wpa-Psk zf


    I have a DW1520 Wireless-N WLAN Half-Mini Card in a Alienware M17X10. I am trying to connect to my home DSL connection through a TRENDNet TEW-435BRM broadcasting in WPA-PSK.
    I have been able to get the card to use both WPA-PSK and WPA2-PSK wireless accounts in other areas so it's not an issue directly tied to WPA-PSK.
    I can get it to connect to the network when the TRENDnet is broadcasting without security (Open broadcast), and when directly plugged into the wireless router by cable - but every time I switch it over to WPA-PSK broadcast it cannot make the connection???
    While in WPA-PSK the WLAN card can 'see' the network and the wireless router can see the 'computer' (and is a "trusted machine"). I have a couple of other earlier model Dells connected to the network without issue or needed changes so any ideas why I would
    have such issues here?
    The driver installed is the 'latest' at 5.60.48.35.
    I have tried rebooting the router and computer without success. I use Windows Firewall.
    Any bright sparks who can point me in the right direction?
    Thanks,
    Declan

    DB:3.12:Cant Connect To A Particular Wpa-Psk With Dw1520 Wireless-N Wlan, But Can When No Security Is Set On Wireless How Can I Get Card To Use Wpa-Psk zf

    Hi
    Try to redo the password in the Wireless part of the Router, and then copy and paste it to the Wireless card.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • RELEVANCY SCORE 3.09

    DB:3.09:Wrt54g Wpa Key zd


    My wrt 54g router is set with a wpa key security . To connect with a PDA 801.11B , doI have to downgrade my security on my router for a WEP key with lower encryption. Is there a way to keep my WPA securityThanks

    DB:3.09:Wrt54g Wpa Key zd

    Most 802.11B devices supportWEP encryption. In theory, some 802.11B devices can support WPA, if the hardware, firmware and/or driver is WPA capable. Check with the PDA hardware manufacturer and see if WPA firmware and/or driver is available for your PDA.

  • RELEVANCY SCORE 3.06

    DB:3.06:Is Wireless Adaptor Wpa Compatible? Please Help. pd



    I have purchased a Wireless adapter to connect to Cinema Plus.

    I have gone through the connection process and everything is fine up to the point where it asks for my "Security Key". I use WPA encryption and an Apple Airport Extreme wireless router. I know what my password "key" is. However when I enter this password the system says it is invalid.

    This is VERY frustrating as I know AS A FACT that I am entering the correct password for the correct network. The wireless adapter can "see" my network, it identifies it correctly and I am asking it to join the correct network. Then it asks for my "security Key" and when I enter it it says that it is not valid.

    All I can figure is that a BRAND NEW wireless adapter is somehow not WPA compatible but that seems nuts. Any clues at all? Any ideas?

    Every other system I own joins the network with no issues at all, PS3, Wii, various phones and computers and iPads all join with no issue but the directv wireless adaptor claims that it is invalid.

    Any help is MUCH appreciated.

    Thanks

    DB:3.06:Is Wireless Adaptor Wpa Compatible? Please Help. pd


    Did you also check the "base station" name? Apple defaults to possessive naming and was the issue for my DCAW1R0-01 install with an Extreme.

    Z

  • RELEVANCY SCORE 3.05

    DB:3.05:Why Is My Ibook G4 Not Wpa Capable? a1


    I try to set a password for my network so I won't provide free Internet for the whole neighborhood. But this pops up when I try to set a password.

    Joining a WPA-protected network and making changes to a WPA-protected base station requires a WPA capable computer. This computer is not WPA capable. If you continue you will not be able to join the WPA-protected network or make changes to the WPA-protected base station.

    What can I do?

    iBook G4

    DB:3.05:Why Is My Ibook G4 Not Wpa Capable? a1

    I have a 466 MHz G3 iBook SE and it does WPA, so your G4 iBook should also. As iFelix is alluding to, it sounds like you have a software version issue.

  • RELEVANCY SCORE 3.04

    DB:3.04:Wga11b Help..Wpa 8a


    I had gotten a WGA11B adapter and works fine. BUT we have WPA and it will not connect. I cannot take out the password beucase the router is for the business and cant have other people using it. Also, WEP is hackable really fast. so plz help..

  • RELEVANCY SCORE 3.03

    DB:3.03:About Wpa 2 Network dk



    I lost WPA2 password since i reinstalled my windows. I cannot connect to network. Also my reset button is not working either. Is there anyway i can recover password.

    DB:3.03:About Wpa 2 Network dk


    What is the model number of your router?

    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank in password use admin in lower case...

    Once you login to the router setup page click on wireless tab then click on sub tab wireless security then in this window you will find the security password.

    Note down your security password using that password you can connect to your wireless network

  • RELEVANCY SCORE 3.02

    DB:3.02:Macbook Internet - Wep Key Or Wpa Password fz


    my wireless router has a wep key which is the only code (as far as i know) for connecting to my network. however my macbook recognises the network but asks for a wpa password which i dont have and when i try to enter the wep key it wont connect. is there anyway to alter the settings so that my mac will accept my wep key?

    DB:3.02:Macbook Internet - Wep Key Or Wpa Password fz

    Just in case you have not figured this out... put a $ sign in front of the encryption code on your mac.

  • RELEVANCY SCORE 3.02

    DB:3.02:Wpa c7



    Whats my WPA?I trying to connect wireless but I dont know my WPA Key

    DB:3.02:Wpa c7


    WPA is a security protocol.

    You create a Pre-Shared Key (PSK), and put it on both devices.

  • RELEVANCY SCORE 3.00

    DB:3.00:What Is My Wpa Key? How Do I Find It? zj


    What is my WPA Key? Im trying to connect my PS3 to my airport

    DB:3.00:What Is My Wpa Key? How Do I Find It? zj

    WPA Key is another phrase for "Wireless Password".

  • RELEVANCY SCORE 2.99

    DB:2.99:Ibook G4 Asks For Preferred Wireless Network Password mp


    Leopard now makes me type in the WPA password for my Airport wireless network when I try to connect, even though the network is one of my preferred networks and remember password option is selected for the network. Why won't the network to join and password be remembered? Instead of automatically selecting the first preferred network, it makes me manually choose the network and then manually enter network's WPA password. How do I fix?

    Thanks.

  • RELEVANCY SCORE 2.99

    DB:2.99:Can't Remember Wpa Password pz



    I am trying to configure my printer to print wirelessly, but when i get it set up it asks for the wpa password. how can i find this password or what is the password that i need to use/

    DB:2.99:Can't Remember Wpa Password pz


    having trouble re-connecting hp Officejet 6500 wirleless to my Mac desktop.

  • RELEVANCY SCORE 2.99

    DB:2.99:Connect Directv Cinema Connection Kit Problems 9x



    I am trying to connect my new DirecTV Cinema connection kit to my DVR but it is limited to 26 letters for my security key. My security key is longer than 26 letters. I cannot connect any other way, my router does not have the capability to connect WPA (pushing the bottom and syncing). Can you help me figure out how to connect? I really don't want to change my security key since so many other things are already connected. Thanks!

    Lori

    DB:2.99:Connect Directv Cinema Connection Kit Problems 9x


    I am afraid you might have to change your security password or use the wired connection kit.

  • RELEVANCY SCORE 2.97

    DB:2.97: Satellite L10-102 Windows 2003 Drivers fz


    My laptop does not connect to my wireless adsl modem even no wpa or wep password is enabled on windows 2003 server!!!

    DB:2.97: Satellite L10-102 Windows 2003 Drivers fz

    I set my adsl modem to factory default.There isnt any changing on its options.What can be wrong with the WLAN setting do you have an idea?

    Although the driver seems to be work properly and there isnt any confliction between any other devices, i think that the wlan driver is not designed for 2003 (toshiba has not published 2003 driver and i have to install the driver for xp)

    and 2003 may need some specific issues for driver about wlan but no problem with lan

  • RELEVANCY SCORE 2.97

    DB:2.97:Wpa Has Disappeared 8f


    Hi,When I logged on to my laptop last night, it would not connect. It said "a network cable is unplugged." I double checked everything a dozen times and the router is connected just fine. I restarted the computer several times. AFter some digging, I realized it's not connecting because the WPA and password has disappeared. It worked fine yesterday morning, so I have no idea how it disapperead between yesterday morning and last night.I have no idea what my WPA is or where to find it. What can I do to get connected again?Thanks!

    DB:2.97:Wpa Has Disappeared 8f

    Log on to your router and go to wireless security.Write downthe shared key for WEP or WPA on a piece of paper.Now Find your network in Available Wireless network list and click on connect.When it ask for the key input the key that you written.You should be able to connect.



    Greetings from Northern Ontario, Canada

  • RELEVANCY SCORE 2.97

    DB:2.97:Wifi Connection With Wpa Protection jm



    I'm trying to connect to my home network which has MAC and also WPA protection. The Bold seems to only accept a WEP number, not WPA. Is there a way around this?

    Thanks in advance, I'm a new user.

    Jay

    DB:2.97:Wifi Connection With Wpa Protection jm


    I got it, finally!

    with a bold 9700 and no sim card, I've gotten Wifi to work. My problem was my key... it is a ATT Uverse modem with a all numeric key...I was not hitting ALT so I was really putting letters in, not numbers.

    I have mobile network off, no sim card and using Hotspot Browser. Hope this helps. Oh yeah, it using the PSK security.

  • RELEVANCY SCORE 2.97

    DB:2.97:Cant Connect To A Particular Wpa-Psk With Dw1520 Wireless-N Wlan, But Can When No Security Is Set On Wireless How Can I Get Card To Use Wpa-Psk 9f



    I have a DW1520 Wireless-N WLAN Half-Mini Card in a Alienware M17X10. I am trying to connect to my home DSL connection through a TRENDNet TEW-435BRM broadcasting in WPA-PSK.
    I have been able to get the card to use both WPA-PSK and WPA2-PSK wireless accounts in other areas so it's not an issue directly tied to WPA-PSK.
    I can get it to connect to the network when the TRENDnet is broadcasting without security (Open broadcast), and when directly plugged into the wireless router by cable - but every time I switch it over to WPA-PSK broadcast it cannot make the connection???
    While in WPA-PSK the WLAN card can 'see' the network and the wireless router can see the 'computer' (and is a "trusted machine"). I have a couple of other earlier model Dells connected to the network without issue or needed changes so any ideas why I would
    have such issues here?
    The driver installed is the 'latest' at 5.60.48.35.
    I have tried rebooting the router and computer without success. I use Windows Firewall.
    Any bright sparks who can point me in the right direction?
    Thanks,
    Declan

  • RELEVANCY SCORE 2.97

    DB:2.97:Can't Connect To Router zx


    Hi, Today I've been unable to connect with my router. I've tried resetting it and the modem multiple times and changed my settings on the router's administrative page sevral times as well to no avail. What keeps happening is when I type in my password to connect with the router it says, "The network 'name' requires a wpa password". I've tried security settings for wpa 2 and wpa, still no luck. I upgraded the router's firmware, nothing. I can get the internet when I'm plugged in to the router, I just can't get wi fi.

    Anyone have any suggestions?

    DB:2.97:Can't Connect To Router zx

    Hi, Today I've been unable to connect with my router. I've tried resetting it and the modem multiple times and changed my settings on the router's administrative page sevral times as well to no avail. What keeps happening is when I type in my password to connect with the router it says, "The network 'name' requires a wpa password". I've tried security settings for wpa 2 and wpa, still no luck. I upgraded the router's firmware, nothing. I can get the internet when I'm plugged in to the router, I just can't get wi fi.

    Anyone have any suggestions?

  • RELEVANCY SCORE 2.96

    DB:2.96:N8: Wifi: Peap Gtc Protocol ms



    Hi,

    I Can't connect to my business network wifi.

    They are using the following:

    mode=managed

    proto=WPA

    key_mgmt=WPA-EAP

    auth_alg=OPEN

    pairwise=TKIP

    eap=PEAP

    phase2="auth=EAP-GTC"

    identity="userid"

    password="pasw"

    But my nokia N8 won't let me connect to the network.

    I cant fill anywhere my password in the settings for gtc just my username.

    Can somebody help me?

    thx

    DB:2.96:N8: Wifi: Peap Gtc Protocol ms


    Got a reply from my IT people. Some Nokia phones does not automatically download the authority certificate (read the darn N8) unlike the iPhone and Android where the Authority Certificate is downloaded autiomatically (actually, the certificate will be downloaded and the iPhone will ask if you would like to accept the certificate or not).

    Now why can't the N8 or Nokia for that matter implement the same thing? I'm in my corporate environment so I need the Authority Certificate. Why can't I be given an option whether to accept the certificate or not?

    Nokia, Fix this!

  • RELEVANCY SCORE 2.96

    DB:2.96:Xperia Arc Wifi Problem On Android 4.0.4 9m



    yesterday i upgarded my phone(2.3.4) to android 4.0.4 ; after that i lost the connection to my home wireless network...

    it keeps sayin obtaining an ip address - secured with WPA/WPA2 ...obtaining an ip address - secured with WPA/WPA2 ..obtaining an ip address - secured with WPA/WPA2 and wont connect to it

    my home network security is WPA - WPA2 ; so i changed it to WEP encryption and my phone succsecfully connected to network.

    anyway the problem is not solve and i cant connect to any Wireless network With WPA or WPA2 encryption...

    plzz help meeeeeeeeee

    thanks

    DB:2.96:Xperia Arc Wifi Problem On Android 4.0.4 9m


    Same problem as others described. Two Xperia Pro phones, one using the Android 2.3.4, the other got upgraded to 4.0.4. The upgraded one started having problems connecting to WPA2 secured WiFi. It goes Connecting - Obtaining IP - ....over and over. It rarely connects. It worked fine before the upgrade. The non-upgraded phone connects OK.

    Hello support, can you help? Will you be posting an Android patch for this anytime soon? I like my phone but I cannot use it properly after following Sony's offer to update it to 4.0.4.

  • RELEVANCY SCORE 2.94

    DB:2.94:Wpa Issue With Wicd, Eeepc 1000h 8m



    Im trying to connect to my network with Wicd.

    What works:Wicd can see my WPA-protected AP. If I disable WPA temporarily, it connects correctly (grabs IP with DHCP too).

    What I cant get to work is access with WPA enabled.

    Ive tried manually changing /etc/wpa_supplicant.conf with
    # wpa_passphrase myssid mypassphrase /etc/wpa_supplicant.conf

    DB:2.94:Wpa Issue With Wicd, Eeepc 1000h 8m


    Im trying to connect to my network with Wicd.

    What works:Wicd can see my WPA-protected AP. If I disable WPA temporarily, it connects correctly (grabs IP with DHCP too).

    What I cant get to work is access with WPA enabled.

    Ive tried manually changing /etc/wpa_supplicant.conf with
    # wpa_passphrase myssid mypassphrase /etc/wpa_supplicant.conf

  • RELEVANCY SCORE 2.94

    DB:2.94:Cant Connect To Wlan Networks [Solved] ca



    Hi, when I installed archlinux i selected the ipw2200 driver from base. It worked fine and I can see all nearby networks but I cant connect. It doesnt matter if it is protected by WEP/WPA or open, it (eth1) always times out. Ive tested network-admin and wifi-radar but its the same thing only that the network-admin has no WPA option for the password and wifi-radar has but it asks for a driver(?). My home network is protected with WPA so that is the highest priority right now.

    Last edited by joltgen (2008-08-14 19:46:25)

    DB:2.94:Cant Connect To Wlan Networks [Solved] ca


    netcfg2 and some rc.conf editing did the trick, no Im writing from my laptop without any wires

    Thanks!

    if useful {The solution =First I installed netcfg, then I did copy the wpa.example from in /etc/network.d/examples to /etc/network.d/(helloworld) and did some modifications. Then I added my network profile to rc.conf: NETWORK=(helloworld). I also added net-profiles to DAEMONS in rc.conf. After a restart it connected automatically to my network;}

    Last edited by joltgen (2008-08-14 19:53:44)

  • RELEVANCY SCORE 2.94

    DB:2.94:New Laptop, Correct Password, Still Cant Connect To Secured Home Network 7f


    Just got a new laptop(Toshiba Satellite L755) and it won't connect to my Belkin wireless router (WPA-PSK). I typed in the correct password, but I still cannot get internet access. HELP!

    DB:2.94:New Laptop, Correct Password, Still Cant Connect To Secured Home Network 7f

    HI
    See how you go with this... You need to enable wireless to laptop before connection can be made..
    In the settings in your belkin make sure there is a tick in the wireless enabled box under the wireless settings?
    Toshiba Satelite has a physycal switch on front of case. FN+F8 shows wether

    wireless communications is enabled or disabled.

    Regards
    GT4U

  • RELEVANCY SCORE 2.93

    DB:2.93:My Iphone Won't Let Me Connect To An Airport Extreme With Wpa/Wpa2 Security Using A 7-Digit Password. zj


    My iPhone won't let me connect to an Airport Extreme with WPA/WPA2 security using a 7-digit password. My MacBook Pro connects without any problem using a 7-digit password but the "Join" button on the iPhone is greyed out until at least 8 characters are entered. Is this normal? Is there a way around this?Btw, the Airport Extrem allows configuring of a 7-digit password so it seems odd that the iPhone won't allow it.

    DB:2.93:My Iphone Won't Let Me Connect To An Airport Extreme With Wpa/Wpa2 Security Using A 7-Digit Password. zj

    My iPhone won't let me connect to an Airport Extreme with WPA/WPA2 security using a 7-digit password. My MacBook Pro connects without any problem using a 7-digit password but the "Join" button on the iPhone is greyed out until at least 8 characters are entered. Is this normal? Is there a way around this?Btw, the Airport Extrem allows configuring of a 7-digit password so it seems odd that the iPhone won't allow it.

  • RELEVANCY SCORE 2.93

    DB:2.93:Forgotton Wpa Password On Mac Os X 78


    I forgot my password and need to add another wireless laptop. I read other posts about fixing this problem by using the URL 192.168.1.1 with a PC that is connected, but this doesn't work on the Mac. (It doesn't connect to anything.) Any ideas? Thanks!

    DB:2.93:Forgotton Wpa Password On Mac Os X 78

    Wire a computer into the router. Open a terminal window and enter "netstat -rn". You should see a line starting with default. In the second column it shows you the IP address of the router, e.g. 192.168.1.1 if it is still on the default address.

    Then you open http://192.168.1.1/ (or whatever IP address you've found) into your browser. You will probably have to use firefox as safari has some issues with the router's javascripts...

    If it does not work, please enter

    ping 192.168.1.1

    into the terminal window (or again the IP address of the default gateway) and post what error you get. Also copy the netstat output into your next post.

  • RELEVANCY SCORE 2.93

    DB:2.93:Ipad Connects To Wpa2 But Not To Wpa ??? p8


    My new iPad, with updated new iOS 4, does not connect to the Wi-Fi using WPA-PSK TKIP. The pasword is 100% correct. Strange enough everything works fine using same password and WPA2 -PSK. How is this possible? How can I fix this? I need WPA-PSK TKIP, because my laptop connects only using WPA but not with WPA2. My other devices alos don't have any problem with my WPA settings. What is wrong with the iPad settings?

    DB:2.93:Ipad Connects To Wpa2 But Not To Wpa ??? p8

    My new iPad, with updated new iOS 4, does not connect to the Wi-Fi using WPA-PSK TKIP. The pasword is 100% correct. Strange enough everything works fine using same password and WPA2 -PSK. How is this possible? How can I fix this? I need WPA-PSK TKIP, because my laptop connects only using WPA but not with WPA2. My other devices alos don't have any problem with my WPA settings. What is wrong with the iPad settings?

  • RELEVANCY SCORE 2.92

    DB:2.92:Can't Connect To Wpa Protected Wifi. Prompt Says Choose A Certificate Or Enter Account Name And Password? Huh sk


    I cannot connect to wifi using my MacBook, my phone and Xbox work but there is no prompt for the WPA password and when I go to the diagnostics page it prompts me to choose a certificate or enter an account name and password? What account name are they referring to? I have entered everything I could think of; the actual connection name and password, the Internet provider login email, my MacBook account name as password... What the heck. After I try, it says connecting for awhile, then fails...

  • RELEVANCY SCORE 2.92

    DB:2.92:Macbook Cannot Connect To Wireless Network. Help Needed Please. ff


    My wireless network consists of a Windows PC connected to a 3-Com wireless broadband router/modem. This has WPA password protection enabled.

    My Dell laptop, my iMac and my brothers Macbook can all connect to this network without any problem. My Macbook can connect to this network via Ethernet cable without any problems.

    My Macbook can connect to my brothers WPA password protected wireless network without a problem.

    I have played around with all the settings in the Network box but still cant connect. I have rebooted the Macbook and the router, still no success. I have disabled WPA protection and still cant connect.

    Im now running out of ideas. Your help is appreciated

    Richard

    DB:2.92:Macbook Cannot Connect To Wireless Network. Help Needed Please. ff

    I struggled with my wireless set up for days. I installed a Linksys wireless WTR54GS router, and had no trouble connecting to my mac with a cable, however as soon as i tried to connect wireless, it kept asking for a password. I kept entering the password that I had established for the router, thinking that is what it was looking for. After resetting the configuration passwords on the web site numerous times, it still wouldn't work. I finally entered an encription key that was listed on the network settings printout, and low and behold - success!
    If the system had only been a little more explict by asking for an encription key instead of password, I could have been up and running a lot sooner.

    Not sure if this is what you are experiencing or not, but it may helps others.

  • RELEVANCY SCORE 2.92

    DB:2.92:Hai I Can't Connect My Wireless Internet With My Pc And Either Ps3 1f



    The PC required me to enter the WPA/ WPE password key, the PC seem to reject the router password which is behind the modem. Anyone help please.

    Thank You

    DB:2.92:Hai I Can't Connect My Wireless Internet With My Pc And Either Ps3 1f


    The PC required me to enter the WPA/ WPE password key, the PC seem to reject the router password which is behind the modem. Anyone help please.

    Thank You

  • RELEVANCY SCORE 2.91

    DB:2.91:Wpa Enterprise 88



    Hello,

    Can any one let me know if Xperia P support WPA Enterprise? How does we connect becuase my company has wifi with WPA-E and it takes our username and password to connect to it.

    Thanks,

    Lajith

    DB:2.91:Wpa Enterprise 88


    ofcourse we can connect through it.just open your wifi and and if takes information its totally not in your phone it is wth your company's wifi security.

  • RELEVANCY SCORE 2.91

    DB:2.91:Psc 2510 Missing Wpa Option 1x



    My PSC 2510 does not have an option in its software for a WPA security password. Am I missing an update? Cannot get the software to connect.

    I am using a Cisco E3000 Router.

    DB:2.91:Psc 2510 Missing Wpa Option 1x


    Hello,

    Is there a firmware upgrade for the printer to allow WPA configuration through the printer's web interface, or does WPA configuration HAVE to be done through the software? Also, does this model support using WPA2-PSK?

    Thanks,

    mat400

  • RELEVANCY SCORE 2.90

    DB:2.90:What Is My Wpa Key? z1



    i am currently tying to connect my ps3 to my sky wireless is it asking for a WPA key, i have entered my password that you put into other devices to connect but it isnt working and is saying WPA key is wrong can anyone help me?

    DB:2.90:What Is My Wpa Key? z1


    It should be the same key that you put into your other devices but if it isn't working what you might need to do is login to your router and chnage the security setting to WPA, you can do this by clicking this link:

    http://192.168.0.1

    Username - admin

    Password - sky

    And you should be able to do this via the wireless settings option. If you then have to enter a new password then this is the one you will need. You would then have to make sure this password was used in your other devices.




    __________________________________________________________________________________________.

    If someone has helped you then please click on the LIKES button in their post.
    I do not work for Sky.

  • RELEVANCY SCORE 2.89

    DB:2.89:Changing From Wep To Wpa (Wpa-Psk) 38


    I have a D-link 624 router that has for about 2 years now been used to connect wirelessly to my Dell 1550 laptop usinh WEP.   Now I want to change to a better form of security.  If I change my router to WPA , will my laptop adaptor also accompdate WPA provided the correct password is entered before I make the change?  

  • RELEVANCY SCORE 2.89

    DB:2.89:Netgear Dg834g V5 And Ps3, Cant Connect k8


    Using the router stated with WPA or WPA2 security applied, my Ps3 cannot connect to the router. However when WEP is used it can connect fine. However a laptop running XP cannot connect well to WEP, usually intermittent connection and cant connect through 'view wireless networks'. However this laptop connect fine with WPA or WPA2.

    I need a balance where both this laptop and the ps3 can connect to the internet, but i cannot find it. WPA would be ideal, but i dont understand why the ps3 cant connect.

    Could someone shed some light on why this is happening and possibly provide a way both of these devices can connect to the internet without issues.

    Thank you.

  • RELEVANCY SCORE 2.88

    DB:2.88:Nokia 5800 - Wpa Wifi Connection - Uottawa xk



    Please help!

    I'm trying to connect to UOttawa's wifi through my Nokia 5800.

    I have these instructions for the iphone and BB :http://www.ccs.uottawa.ca/connect/wireless/config-wpa-bb.html

    I've added the connection, but it still won't connect. It just says "Connecting via 'uottawa-WPA' and does that forever.

    Does anyone know how to add the username and password details??

    Thanks so much!!

    DB:2.88:Nokia 5800 - Wpa Wifi Connection - Uottawa xk


    Please help!

    I'm trying to connect to UOttawa's wifi through my Nokia 5800.

    I have these instructions for the iphone and BB :http://www.ccs.uottawa.ca/connect/wireless/config-wpa-bb.html

    I've added the connection, but it still won't connect. It just says "Connecting via 'uottawa-WPA' and does that forever.

    Does anyone know how to add the username and password details??

    Thanks so much!!

  • RELEVANCY SCORE 2.88

    DB:2.88:Wep/Wpa 19



    To connect wirelessly to my new printer, I need to provide the WEP key or the WPA password. Where would I find such information?

    DB:2.88:Wep/Wpa 19

    Is there any computer online using the router.
    check the IP address on that computer.
    If yes then you can open the router set up page on

    that computer.
    router set up page is the page where you can check

    all the router settings.

    Click Here for more information about the routers

    and network

    Try this

    (Mod note: Edited for forums compliance.)
    Message Edited by OnnagokorO on 02-13-2010 08:40 PM

  • RELEVANCY SCORE 2.87

    DB:2.87:Problem Connecting Wpa-Psk da



    My new HP mini can connect to my router if it has no protection. When I do protect it with WPA-PSK, and I set the password and everything, my HP mini cant connect. All of the settings are right, so I dont know what could possibly be the problem... The name of the router does appear when I look for an internet connection, but it just wont connect- and it doesnt give an error message. I know the router works, because my desktop can connect to it fine. You might suggest just having the router with no protection, but I don't exactly want to do that as if other people use it, it will go slow.

    Any suggestions or help, or anything that could possibly fix my problem would be greatly appreciated (and the real problem is that i want to connect my HP mini to the router when the router has some sort of protection, which doesnt have to be WPA-PSK.)

    Thanks.

    DB:2.87:Problem Connecting Wpa-Psk da


    I have managed to solve the problem.

    I went into my router configuration panel and found aWPA-PSK Encryption Key which was different from the Router Password. I entered the encription key into the Broadcom wireless configuration dialogue box and it worked first time.

    But where this leaves us when we are out and about is anyone's guess. We can hardly ask the system administrator of a router in a restaurant to access the device's web page and find out theWPA-PSK Encryption Key!

  • RELEVANCY SCORE 2.87

    DB:2.87:A Different Wi Fi Question.. jk


    I'd appreciate anyone's help..
    Can't connect via wi-fi (obviously), but..why ?
    Router is set to WPA-PSK with TKIP
    Only other option on router is WPA-PSK with AES.
    No luck with either.
    Ipod will not connect to the network via either protocol, either with ipod set to WPA or WPA2..
    Doesn't help if I let the network sid get broadcast (ipod sees the network but will not connect) or if I define a new 'other' network.
    I know the password (key) is right.
    Is WPA / WPA2 on the ipod different to the flavours I've got available on my wireless router ?
    i.e. WPA-PSK with either TKIP or AES encryption?
    So do I need a new router ?
    Any ideas anyone ?
    Many thanks in advance to anyone who can point me in the right direction.

    Regards,

    Paul

    DB:2.87:A Different Wi Fi Question.. jk

    I'd appreciate anyone's help..
    Can't connect via wi-fi (obviously), but..why ?
    Router is set to WPA-PSK with TKIP
    Only other option on router is WPA-PSK with AES.
    No luck with either.
    Ipod will not connect to the network via either protocol, either with ipod set to WPA or WPA2..
    Doesn't help if I let the network sid get broadcast (ipod sees the network but will not connect) or if I define a new 'other' network.
    I know the password (key) is right.
    Is WPA / WPA2 on the ipod different to the flavours I've got available on my wireless router ?
    i.e. WPA-PSK with either TKIP or AES encryption?
    So do I need a new router ?
    Any ideas anyone ?
    Many thanks in advance to anyone who can point me in the right direction.

    Regards,

    Paul

  • RELEVANCY SCORE 2.87

    DB:2.87:Connection Timout / Invaild Password 3x


    I have a serious problem, my macbook use to work fine but now the wifi is giving me problems, i cant connect to WPA Personal and WPA-PSK/TKIP wifi.It's always giving me "connection timeout", if i use the assit me it give me "The password you entered is invalid" even though the password correct.I have formated and re-install the OS, i even upgraded from Mac OS X v10.7 Lion to OS X Mountain Lion but still not working, It works fine on WEP and RADIUScan anyone help me out?

    DB:2.87:Connection Timout / Invaild Password 3x

    I have a serious problem, my macbook use to work fine but now the wifi is giving me problems, i cant connect to WPA Personal and WPA-PSK/TKIP wifi.It's always giving me "connection timeout", if i use the assit me it give me "The password you entered is invalid" even though the password correct.I have formated and re-install the OS, i even upgraded from Mac OS X v10.7 Lion to OS X Mountain Lion but still not working, It works fine on WEP and RADIUScan anyone help me out?

  • RELEVANCY SCORE 2.86

    DB:2.86:How To Find Wpa Key On Airport? xx


    Hi,I just moved in my new apartment and my roommate has an airport router. He does not remember is WPA key (but remembers the password to connect). The thing is, I'm trying to connect my PS3 to the wifi connection and it asks for the WPA key... Is there an easy way to retrieve the WPA key?Thanks so much in advance!Samfolds

    DB:2.86:How To Find Wpa Key On Airport? xx

    On the MacBook.....Open Macintosh HD Applications Utilities AirPort UtilityClick Manual SetupDo not look at the window in the center of the screen. Instead, shift the focus of your eyes to top edge of the computer screen.To the right of the Apple icon, locate the Base Station Menu and click on it.Click Equivalent Network Password and the "key" will be revealed. Of course, there is no guarantee that this will work because we do not know if the PC is compatible with the type of wireless security that is being used by the Apple router.

  • RELEVANCY SCORE 2.85

    DB:2.85:Hp Printer Won't Connect To Wifi Network pc



    I am trying to connct my HP Photosmart 2700 printer to my WiFi network but it won't accept my password.

    I know that I am putting my correct password. My printer screen says " Enter WEP password", but IT IS NOT a WEP key. It is a WPA 2 Personal password.

    I restored my printer to its factory network settings and it still detects my network as WEP encrypted, not WPA 2.

    How do I fix this I want to print from my MacBook laptop?

    DB:2.85:Hp Printer Won't Connect To Wifi Network pc

    Hi Leo013

    I understand you have WPA 2 encryption but the printer is recognizing the encryption as WEP.

    We can verify this information.

    To check the encryption type go to the Apple/system preferences/network/click the advanced button/double click network name.
    (shows WEP or WPA)

    To check the network password go to the Mac harddrive/applications/utilities/keychain access/double click the network name/check the box to show the password/put in your Mac password to view it.

    Try running the wireless setup again.

    You could try setting up the printer as Adhoc and then configure to Infrastructure.

    Click the airport at the top right corner on the Mac.
    Click on the HP printer from the list.
    It takes about 3 minutes to connect.
    Once you get a solid blue light it is connected successfully.

    Print off a configuration page to get the printer's IP address.

    Then open Safari and type in the IP address of the printer which will open the embedded server for the printer. Then Click the Networking tab, click the Wireless tab and select infrastructure and your network name, password and apply the settings.

    After you get a solid blue wireless light on the printer, go back to the airport and connect back to your network name. Then add the printer on the Mac.

    Let me know the results.

  • RELEVANCY SCORE 2.85

    DB:2.85:I Forgot My Wpa Password. Does Anybody Know How To Retrive Them? dc


    I forgot my WPA password. Please help me to retrive them.

    DB:2.85:I Forgot My Wpa Password. Does Anybody Know How To Retrive Them? dc

    If you still remember your router's "master password", there will be a screen somewhere in the menus. It will configure your wireless network.If you have forgotten your master password, there is a "reset button". It is recessed, probably near the power connection. You will likely need a pointed thing (pen tip, etc). Makes it "factory original". Then you can set up a new master password and wireless network again.I always fear the day I forget my router's "master password" and must start again from scratch.

  • RELEVANCY SCORE 2.85

    DB:2.85:How To Connect Wifiwith Linksys Router And Wpa Encryption? sf


    I can only connect to my home WIFI with encryption disabled. As soon as I turn on WPA, I get the Unable to Join Networks message. Once ina blue moon it asks for a password (mine is 8 characters) but the join button is not activated until I enter 10 characters. Ive been working on this all day yesterday until 1:30 am and again today.

    DB:2.85:How To Connect Wifiwith Linksys Router And Wpa Encryption? sf

    I find that although the SHIFT icon toggles nicely, the displayed letter on touching a letter icon is always in UPPER CASE. Despite that dodgy display, the SHIFT icon does work.

    In other words, UPPER/local case WPA2 passwords can be entered.

  • RELEVANCY SCORE 2.85

    DB:2.85:Can't Connect My Directv To The Internet After Changing Internet Providers. dx



    I recently ordered the DirecTV Cinema Plus connection kit. I installed it, and it worked. Because my internet was slow, I decided to change providers. I got faster internet, and a new WPA-PSK password. Which means my Cinema Plus router is no longer connected to the internet. I have tried using Network Setup/Repeat Network Setup, but It doesn't ask me for the password. I tried resetting the router, and followed the original installation procedures, but that didn't help. I have no idea what to try next. My receiver is an HR23/700.

    DB:2.85:Can't Connect My Directv To The Internet After Changing Internet Providers. dx

    try holding the reset button on the back of the CCK-W for 30 seconds. then on your HDDVR press

    MENU ➜ SETTINGS HELP ➜ SETTINGS ➜ NETWORK SET UP ➜ RESTORE DEFAULTS ➜ CONNECT NOW ➜ GET CONNECTED ➜ WIRELESS. the receiver will then scan for Wi-Fi networks and should d find yours. once it finds your SSID, select your network name. if your network is secured, it will ask you to type in your password. if successful, you will get a message that says "congratulations, your receiver is connected to the internet" Note that your SSID and/or password cannot have any spaces and/or special characters

  • RELEVANCY SCORE 2.85

    DB:2.85:A65-126 Can't Connect To My Wpa (Wpa2?) Router jj



    Hi,

    I have an old Satellite A65-126 that I bought from a friend. I also recently installed a D-Link DIR-655 router that I believe is WPA-PSK protected (the passcode is a 64-character hexadecimal string). Now, the other laptop in my home connects to the router just fine, but the Toshiba can't make a connection. It connects to other (non-password-protected) routers, so I suspect there's some issue with WPA compatibility.

    My question is, uh, how can I set up a WPA connection? Does anybody have experience with this?

    I think I've downloaded enough stuff through Windows Auto-Update...It says it's "service pack 3."

    Thanks in advance,

    Jimbles

    DB:2.85:A65-126 Can't Connect To My Wpa (Wpa2?) Router jj


    Hi,

    I have an old Satellite A65-126 that I bought from a friend. I also recently installed a D-Link DIR-655 router that I believe is WPA-PSK protected (the passcode is a 64-character hexadecimal string). Now, the other laptop in my home connects to the router just fine, but the Toshiba can't make a connection. It connects to other (non-password-protected) routers, so I suspect there's some issue with WPA compatibility.

    My question is, uh, how can I set up a WPA connection? Does anybody have experience with this?

    I think I've downloaded enough stuff through Windows Auto-Update...It says it's "service pack 3."

    Thanks in advance,

    Jimbles

  • RELEVANCY SCORE 2.84

    DB:2.84:Ht1695 I Enter My Wpa Security Code But It Says Incorrect Password xa


    I type in WPA Security code but it says incorrect password - Ipod Touch - am I using incorrect password to connect to my new Wifi provider

    DB:2.84:Ht1695 I Enter My Wpa Security Code But It Says Incorrect Password xa

    The Security Key WPA worked on our laptop and my daughters HTC mobile so why won't it work on ipod ?

  • RELEVANCY SCORE 2.84

    DB:2.84:Wpa-Psk Wireless Not Accepting Password af


    For some reason I can't seem to connect to one in particular wireless internet router- It is using WPA-PSK security, and airport is telling me that I have an incorrect password although I am positive it is the correct one. I friend of mine determined that the router's security settings should be allowing me in, that it is most likely my computer that is the bad link- Please offer any suggestions!

    DB:2.84:Wpa-Psk Wireless Not Accepting Password af

    Thank You! I was going crazy trying to figure it out- I'll give the password change a try...

  • RELEVANCY SCORE 2.84

    DB:2.84:Mac Airport Wpa Compatibility With Directv Cinema Plus Kit 1c



    My Directv HDDVR does not recognize the password for my home wi-fi. I'm trying to set up my Cinema Plus kit but it continually tells me the password I enter is incorrect. The tech from Directv was very little help but thinks it has to do with WPA2 security. Does anyone know how to make this work? I cannot be the only person with this combination of devices. Thanks.

    DB:2.84:Mac Airport Wpa Compatibility With Directv Cinema Plus Kit 1c

    The Wireless CCK is very case sensative on connecting up to any type of wireless link up. When entering your passcode for your WPA2 security it has to be the same as it shows under the setup. If any of the letters are in Cap. you will have to enter those in that way, same goes for lower case letters. Just keep pressing the number button on the remote to scroll throught he different letters.

  • RELEVANCY SCORE 2.84

    DB:2.84:[Netctl] Profile Does Not Specify A Valid Connection sc



    Netctl is failing to connect to my university wireless network (eduroam). A friend was able to connect on his Arch box using the following profile
    Description=Eduroam
    Interface=wlp2s0
    Connection=wireless
    Security=wpa-configsection
    IP=dhcp
    WPAConfigSection=(
    ssid=eduroam
    scan_ssid=1
    key_mgmt=WPA-EAP
    eap=TTLS
    group=TKIP
    group=CCMP TKIP
    anonymous_identity=anonimo@unicamp.br
    identity=000000@unicamp.br
    password=senha
    ca_cert=path_to_certificate
    phase1=peaplable=0
    phase2=auth=PAP
    )

    DB:2.84:[Netctl] Profile Does Not Specify A Valid Connection sc

    Starrsky wrote:
    Are you certain your MAC address isnt blacklisted or that there is no MAC filtering for the network?Also ca_cert=path_to_certificate is in practice a bogus value or is that censorship on your part?

  • RELEVANCY SCORE 2.84

    DB:2.84:Why Cant I Connect My Iphone 3gs To Windows 7 Through Adhoc Wifi?? k3


    i cant connect my pc running on windows 7 ulitimate using adhoc wifi under any condition, i tried open network, wep, wpa psk, wpa psk2, why is this???

    DB:2.84:Why Cant I Connect My Iphone 3gs To Windows 7 Through Adhoc Wifi?? k3

    i cant connect my pc running on windows 7 ulitimate using adhoc wifi under any condition, i tried open network, wep, wpa psk, wpa psk2, why is this???

  • RELEVANCY SCORE 2.83

    DB:2.83:Mpower Wifi Wpa/Wpa2 Password Length? fm



    I just spent over an hout tring to get an mpower mini to connect to an AP with either wpa or wpa2 security using a 10 digit as in numbers password.

    Is there some sort of bug with a 10 number pass word?

    I brought the thing in to the house and it connected to my AP ( exact same Model ) with NO security in a few seconds. ?




    I don't do windows,,,, I format and install linux !

    DB:2.83:Mpower Wifi Wpa/Wpa2 Password Length? fm


    I forgot to mention that I did NOT have this problem with the mFi-mPower 3 port version I installed at the same time on the same ACL limited WiFi network.

  • RELEVANCY SCORE 2.83

    DB:2.83:Crowdsupport 7a



    I changed my Bigpond Internet password to control who is using the wifi but I cant find where I can change the wpa / wps password to stop other users from logging on without permission when I change passwords. Can anyone help me out ?







    Solved!
    Go to Solution.

    DB:2.83:Crowdsupport 7a


    ok Choc let's see how we go with this.

    Firstly I think you should download the PDF copy of the full user manual for this device at the following link: http://setuprouter.com/router/technicolor/tg587nv3​/manual-1250.pdf

    Now after that go to section 5 page 39 and read the details there. It explains how to configure the Gateway Wireless Access Point. and in particular the what they refer to as Access Key (Password etc for WiFi connections).

    I would also in particular point out 5.3 page 43 Securing Your Wireless Connection. You'll see in particular a heading Configuration then you can access Home Network, click wireless and this is were you can change access settings etc.

    After you've read all the infothat I highligthed aboveopen up your browser and enter to access http://dsldevice.lan or if that doesn't open the menu page for the TG587type 192.168.1.254. and then start configuring




    If I have provided an answer, or posed a question that helps or interests you, your KUDOS vote would beIf I or anyone has provided a solution, you'll help others if you mark our answer as the Solution.NB: I am NOT a Telstra employee, just another customer like you.ThanksJeff

  • RELEVANCY SCORE 2.83

    DB:2.83:Connection Problem When Using A Password zz



    For some reason I can connect to my WRT54g v.5 router when it is unsecured but the second I put a password i cannot connect. I've tried changing the security settings (WPA, WEP, etc.) but nothing seems to work. Any suggestions? Thanks.

    DB:2.83:Connection Problem When Using A Password zz

    Well the very firststep that you can try ismanully creating a profile of the wireless network on your computer and that depends on the operating system that you have......You can check the following link about how to create a network profile on your computer.

    For windows XP

    http://ecross.mvps.org/howto/configwlan.htm

    For Windows Vista check the following artical :

    http://www.windowsreference.com/windows-vista/how-​to-manually-connect-to-wireless-network-not-broadc​...

    For windows 7

    http://technet.microsoft.com/en-us/magazine/ff8475​20.aspx

    If still you are unable to connect with the secured wireless network.... Then you need to update the router with the latest firmware , You can check the following articale about how to update the firmware on your router..

    http://www6.nohold.net/Cisco2/ukp.aspx?pid=93logi​n=1vw=1app=searcharticleid=4030userrole=Linksy​...

  • RELEVANCY SCORE 2.83

    DB:2.83:Cant Connect To Wpa-Enterprise Wlan With E61i m8


    All,

    Here's the settings I pulled out of Intel PROSet utility I'm using with my laptop

    PEAP User Panel:
    Network Authentication: WPA-Enterprise
    Data Encryption: TKIP
    Auth Type: PEAP
    Auth Protocol: GTC
    User credentials: Username/password
    Then I have my username and password typed in there, with Domain blank, and a "Roaming Identity" that was already filled in with a what appears to be my Windows Domain\User, so I left it as was.

    PEAP Server Panel:
    Validate Server Certificate is Checked
    Cert Issuer set to "Any Trusted CA"

    This works on my laptop but I'm having a bear of a time getting this to work in the E61i.

    I read some documentation on the nokia site where if I set it to WPA/WPA2 i'm supposed to see the TKIP option in the menu but I don't see it.

    Has anyone else gotten this same type of WLAN auth scheme to work with the E61i?

    Thanks in Advance

    DB:2.83:Cant Connect To Wpa-Enterprise Wlan With E61i m8

    jonoden wrote:
    All,

    Here's the settings I pulled out of Intel PROSet utility I'm using with my laptop

    PEAP User Panel:
    Network Authentication: WPA-Enterprise
    Data Encryption: TKIP
    Auth Type: PEAP
    Auth Protocol: GTC
    User credentials: Username/password
    Then I have my username and password typed in there, with Domain blank, and a "Roaming Identity" that was already filled in with a what appears to be my Windows Domain\User, so I left it as was.

    PEAP Server Panel:
    Validate Server Certificate is Checked
    Cert Issuer set to "Any Trusted CA"

    This works on my laptop but I'm having a bear of a time getting this to work in the E61i.

    I read some documentation on the nokia site where if I set it to WPA/WPA2 i'm supposed to see the TKIP option in the menu but I don't see it.

    Has anyone else gotten this same type of WLAN auth scheme to work with the E61i?

    Thanks in Advance

    Turn off WPA2 only mode, raise PEAP and GTC priority.




    ‡Thank you for hitting the Blue/Green Star button‡

    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • RELEVANCY SCORE 2.83

    DB:2.83:Befw11s4 V4 - Wpa Problem sf



    When I turn on WPA on my router, I am only able to connect wirelessly with one of my laptops... They are running Vista. I live in an apartment complex so it is important for me to secure my network.

    When I try connecting using the password from other computers, I get an error that is telling me there is no response from the router....?

    DB:2.83:Befw11s4 V4 - Wpa Problem sf


    Well, try to create profile on the other wireless computer.

    Click on the Start button Control Panel Network Connections-
    Here right click on the "Wireless Network Connection" icon and select
    Properties- Click on the 'Wireless Network' tab- Click on the 'Add'
    button below- Provide the network name in the SSID box exactly as set
    on the router/gateway(as it is case sensitive)- Data encryption (WEP
    enabled) should be checked- Uncheck the box that says, "The key is
    provided for me automatically"- Type the network key in the Network
    key box as set on the router/gateway and then confirm it again and
    click Ok.

  • RELEVANCY SCORE 2.82

    DB:2.82:Can't Get Powerbook/Airporte To Connect To D-Linke Dir-625 8a


    We've set up a D-Link router in the apartment and everyone else (PC users) can connect fine but me. Mine is a Powerbook with Airport Card. It displays the router network. But when I choose it from the Airport pulldown menu and type in the password, I get a spinning beach ball, followed by a "cannot connect due to error" message. This particular D-Link model appears to use only WPA security (not WEP.) The D-Link setup has several WPA options (WPA, WPA2, WPA personal, etc.) but my Airport pulldown menu shows only one -- WPA. So I'm concerned that the issue may be in the security protocol. Anyone have suggestions with this. Have gone through all the Airport/Network settings to see if there are other options to try regarding security but don't see anyting.

    DB:2.82:Can't Get Powerbook/Airporte To Connect To D-Linke Dir-625 8a

    Does the mac somehow know, from hitting the router,
    there only one security standard is applicable?

    Yes

    The router will be broadcasting this is a secured network which uses WPA.

  • RELEVANCY SCORE 2.82

    DB:2.82:Wep, Wpa Problems z8


    My girlfriend's MacBook is having issues connecting to our wireless network. We set up the network with a WEP password. When she started having connection problems I went into the network control panel and there was some huge password that was not what we had programed. I typed in the proper one and it hit apply now. It connected to the network but in the control panel it changed the WEP to a WPA password. It won't connect again as a WPA password and everything I try to change it permanently fails. Any suggestions?

    DB:2.82:Wep, Wpa Problems z8

    No longer an issue, just noticed the problem was still open. I guess it resolved itself...

  • RELEVANCY SCORE 2.82

    DB:2.82:Cant Get Touch To Connect To Wifi 17


    help i can not get my 32gb v2.1 touch to connect to my home wifi i have a d-link router and the wii, psp , ps3 and laptop all find and work ok .but the touch will find the signal and after putting in the password i use the the rest of the gear the touch pops up with "unable to join the network" i have used the correct ssid name and the router is using a wpa password as i say the rest of my gear works ok with that so why not the touch??

    DB:2.82:Cant Get Touch To Connect To Wifi 17

    Yeah, getting that check mark makes the link. If you d not have that, the touch is not on that network and (in my opinion) the rest may not follow (IP numbers, etc.).

    You may have to tap it a couple of times: be persistent. You are doing nothing wrong, but are not right enough. Not yet.

  • RELEVANCY SCORE 2.82

    DB:2.82:Wdtv Live Plus Wpa / Wpa2 Enterprise ? sc


    Hey guys, I have recently purchased a new WDTV Live Plus and a USB wireless adapter. The adapter recognizes wpa/wpa2-enterprise on my computer but when it's connected to my wdtv it only allows me to add wpa/wpa2 psk (personal). I have updated the firmware to the latest and i can see 2 new options is added but i still can't find wpa-enterprise. Could some one please tell me how do i connect to a wpa-enterprise connection (the one requires username and password)? Thanks

    DB:2.82:Wdtv Live Plus Wpa / Wpa2 Enterprise ? sc


    You can't. It only supports WPA/WPA2 personal.




    ===Live SMP / Live Hub x2 / Live+ / Live x2 / 24 TBytes of QNAP + WD NAS ===

  • RELEVANCY SCORE 2.82

    DB:2.82:Netctl With 802.1x Password Obfuscation 9x



    Hi,

    Ive figured out how to connect to an 802.1x network with netctl, but right now my password is in cleartext in the profile for the network. The netctl wiki page shows how to do password obfuscation for a wpa network, and I was wondering if it is possible to obfuscate the password in a similar way for 802.1x.

    This is my current profile:
    Description=Automatically generated profile by wifi-menu
    Interface=wlan0
    Connection=wireless
    Security=wpa-configsection
    ESSID=id
    IP=dhcp

    WPAConfigSection=(
    ssid=id
    proto=RSN
    key_mgmt=WPA-EAP
    pairwise=CCMP
    auth_alg=OPEN
    eap=PEAP
    identity=User
    password=Pass
    )

    DB:2.82:Netctl With 802.1x Password Obfuscation 9x


    Hi,

    Ive figured out how to connect to an 802.1x network with netctl, but right now my password is in cleartext in the profile for the network. The netctl wiki page shows how to do password obfuscation for a wpa network, and I was wondering if it is possible to obfuscate the password in a similar way for 802.1x.

    This is my current profile:
    Description=Automatically generated profile by wifi-menu
    Interface=wlan0
    Connection=wireless
    Security=wpa-configsection
    ESSID=id
    IP=dhcp

    WPAConfigSection=(
    ssid=id
    proto=RSN
    key_mgmt=WPA-EAP
    pairwise=CCMP
    auth_alg=OPEN
    eap=PEAP
    identity=User
    password=Pass
    )

  • RELEVANCY SCORE 2.82

    DB:2.82:Wg311v3 Wont Connect When Wpa Is On 3m


    Hey. My internet has always been unsecured, but then i decided to make a WPA security on my router. But when WPA is on, then i cant connect to my router I also have a laptop (which isnt using Netgear), and it connects with no problems. Iv'e tried to disable WLAN Autoconfig, but then my whole internet collaps. So I can only connect when my internet is unsecured. Somebody who know what the problem could be.

    I'm using Windows 7 by the way.

  • RELEVANCY SCORE 2.81

    DB:2.81:Cant Connect N95 To Netgear mm


    Could someone please tell me how to connect my phone to my DG834GT router.

    My router is set to WPA-PSK (Wi-Fi Protected Access Pre-Shared Key)

    My phone finds the router and asks for key.
    When i put in key it says unable to connect.

    my phone setting for the access point are

    WPA/WPA2

    Please help.

    DB:2.81:Cant Connect N95 To Netgear mm

    Thanks mate.

    It turns out that i needed to to add the gateway address of the phone to the permissions list on my route.It works fine now.

  • RELEVANCY SCORE 2.81

    DB:2.81:Cant Connect To Wireless 877 Router - See Config ds



    Hi, I'm ready to give up on this :)

    I have a Cisco 877w DSL router. I can access the Internet fine via ethernet, but I have tried to configure wireless on the router but can't connect to it. When I browse the wireless networks I can see it (ssid MyN3t), but when I try connect to it I don't get prompted for the WPA password.

    My ISO is the latest c870-advipservicesk9-mz.124-15.T4

    Config attached, I hope you can help!

    DB:2.81:Cant Connect To Wireless 877 Router - See Config ds


    Actually, from what I've found, configuring those is a bit trickier than regular routers. Unfortunately because of the way our Proxy serves are configured, I can't see attachments, so I don't know what your config is... However, the basics are quite simple if you think about it...

    What you want is for your wireless and your wired connections to be in the same subnet. Normally put the IP address on the Ethernet interface of a router for the LAN. But then how does the wireless get on the same subnet? VLAN's? This router does have a VLAN interface for putting the IP on for its shared ethernet ports, but AP's use "BVI" interfaces and that's the key... "BVI" is Bridge Virtual Interface.

    Set up a "BVI 1" interface and put your LAN IP address on that instead of the VLAN interface.

    interface BVI1

    description $ES_LAN$

    ip address 10.X.X.X AAA.BBB.CCC.DDD

    no ip route-cache

    Then, put your Do0 interface and VLAN 1 interface on bridge-group 1

    interface Dot11Radio0

    no ip address

    bridge-group 1

    bridge-group 1 spanning-disabled

    !

    interface Vlan1

    no ip address

    no ip route-cache

    bridge-group 1

    bridge-group 1 spanning-disabled

    And you should be all set. If your wired network works, your wireless should, that is assuming you have your WPA set up right... We're using this with EAP-FAST, so I can't help you with that part!!

  • RELEVANCY SCORE 2.81

    DB:2.81:Connecting Printer To Wireless Network jp



    I have a new HP OfficeJet Pro 8600 Premium. When I try to connect to my wireless network, I get an error message "Invalid wireless password (WPA) entered". I have three computers connected to the network, all using the same WPA password, so I know that this is the correct password.

    Can anyone help?

  • RELEVANCY SCORE 2.81

    DB:2.81:My Ipod Wont Connect To My Secured Wifi fp


    I brought the ipod today brand new from the apple store and its fine, apart from when i try to connect to the family wireless, it is a secured wireless on a WPA TKIP security and i click on "other networks" and type in the name of the wireless and click WPA and type in the password correctly but i always say " failed to join"... HELP

    DB:2.81:My Ipod Wont Connect To My Secured Wifi fp

    Ever since my dad put a password on the wireless it has been doing this, it was fine before! im not very good with nice kind of stuff so sorry if i dont make sence!yes the name and password is correct, i have been trying it for ages yes my laptop is connected but my mums iphone wont connecti have reset the ipod and the network settings!i only brought it today so surely ut should have the latest update?

  • RELEVANCY SCORE 2.81

    DB:2.81:[Solved] Netctl Wpa-Enterprise Wont Connect jp



    Hi,

    i have problems connecting to the network of my university.Im not quite sure about the syntax of the config file, but this is what the example looked like.

    Profile:

    Description=universityInterface=wlan0Connection=wirelessSecurity=wpa-configsectionIP=dhcpWPAConfigSection=( ssid=university-ssid key_mgmt=WPA-EAP eap=PEAP proto=RSN group=TKIP pairwise=CCMP identity=ziv667 password=XXX ca_cert=/etc/ssl/certs/Deutsche_Telekom_Root_CA_2.pem priority=1 phase2=auth=MSCHAPV2)

  • RELEVANCY SCORE 2.81

    DB:2.81:Wifi Connectivity To Wpa-Enterprise. cz


    Trouble connecting to WPA-Enterprise WIFI on Nokia Lumia 800(WP7.5).Access point gets detected, but doesn't connect because default type is set to WPA2-ENT. cant edit this option too. any work around?

    DB:2.81:Wifi Connectivity To Wpa-Enterprise. cz

    Trouble connecting to WPA-Enterprise WIFI on Nokia Lumia 800(WP7.5).Access point gets detected, but doesn't connect because default type is set to WPA2-ENT. cant edit this option too. any work around?

  • RELEVANCY SCORE 2.81

    DB:2.81:Cant Log Onto Home Network W/Wpa Password 3p


    I can not seem to log onto my home network which has a WPA password. As I try, it tells me that the password is incorrect. Please help!

    DB:2.81:Cant Log Onto Home Network W/Wpa Password 3p

    Hello cjpert, and a warm welcome to the forums!

    If you don't get your answer here, feel free to start a new topic of your own, it's quite acceptable general;y preferred to get the most helpers in on your particular situation.

    It can be confusing to find out where to do this quite often, do here's a link...

    http://discussions.apple.com/post!default.jspa?forumID=755

    We need to know a few things, early Airport cards cant do WPA2 or anything but 802.11b, so At the Apple Icon at top leftAbout this Mac.

    Then click on More InfoHardware and report this upto *but not including the Serial#*...

    Hardware Overview:

    Machine Name: Power Mac G5 Quad
    Machine Model: PowerMac11,2
    CPU Type: PowerPC G5 (1.1)
    Number Of CPUs: 4
    CPU Speed: 2.5 GHz
    L2 Cache (per CPU): 1 MB
    Memory: 10 GB
    Bus Speed: 1.25 GHz
    Boot ROM Version: 5.2.7f1

    Might post that in a new topic of your own... or not!

  • RELEVANCY SCORE 2.81

    DB:2.81:Can't Connect To Wpa And Wpa2 Network With Nokia E... 3a



    Okay so I have an E63 and Ive been trying to connect to my university network, which requires user name and password.

    When I click, 'start web browsing', it says 'connecting' but then nothing loads. It doesnt even ask me for my user name and password, as it should.

    The security is WPA / WPA 2

    so what do I do? I've tried enabling everything

    DB:2.81:Can't Connect To Wpa And Wpa2 Network With Nokia E... 3a


    Okay so I have an E63 and Ive been trying to connect to my university network, which requires user name and password.

    When I click, 'start web browsing', it says 'connecting' but then nothing loads. It doesnt even ask me for my user name and password, as it should.

    The security is WPA / WPA 2

    so what do I do? I've tried enabling everything

  • RELEVANCY SCORE 2.80

    DB:2.80:Airport Extreme Gigabit With Wpa On Windows Machine Help! 7a


    I have a Mac Powerbook and an iPhone. When I setup my Airport Extreme Gigabit last night with a WPA password it worked fine on my MAC and iPhone, but my wifes Windows XP Pro laptop will not connect.

    So...I set up a WEP password and all 3 devices worked fine.

    Question...Everyone says WEP is not as secure. Will the PC hook up to WPA...if so what am I doing wrong?

    Thanks

    DB:2.80:Airport Extreme Gigabit With Wpa On Windows Machine Help! 7a

    You might be helped with this patch for Windows XP: http://www.microsoft.com/downloads/details.aspx?FamilyId=662BB74D-E7C1-48D6-95EE -1459234F4483amp;amp;amp;amp;amp;amp;amp;displaylang=endisplaylang=en

    It introduces support for WPA2.

  • RELEVANCY SCORE 2.80

    DB:2.80:Hp 3050 Wpa Security xm



    my 3050 was connected to my network perfectly. then i changed security to WPA. and can not connect!!!

    more specifically:

    yosemite macbook pro

    WPA2-PSK

    infinitum ADSL

    when prompted for the modem password, the printer install refuses the correct PW

    DB:2.80:Hp 3050 Wpa Security xm


    randyleach,

    Were you able to follow the instructions in my earlier recommendation?Itwalks you througha USB to wireless installation. You need to unplug the USB, run theinstallation software to connect the device and choose USB to Wireless, plug in the USB when prompted by the on screen instructions.

    Use the above document and select your current Operating system from the list.

    Let me know how it goes.

  • RELEVANCY SCORE 2.79

    DB:2.79:Cannot Connect To Internet (13) fp



    It seems as if many people have this issue, and so far I have called Directv (many times) and Cisco/Linksys (numerous times, they sent me to a paid service, I paid for it, but no success yet). I just love the fingerpointing.

    Here is my setup: Cisco/Linksys WET610N connected to the top Enet port of the H21-100 HDDVR box. Wireless connection to my Apple Airport extreme router. WPA/WPA 2 security with password.

    The WET610N is seen by my router. When I go through the Directv setup, it detects the wireless adapter (wet610N). I then get the Internet (13) status, cannot connect to the internet. Tried numerous reboots of all devices, including the HD box. Tried without the WPA/WPA2 security, not working that way either. (that confuses me - I don't see how the hd box would get the password, unless it gets it from the wet610N, but on these forums it seems like people have connected with security??)

    Tried the bottom enet port too..

    any other ideas?

    thanks

    DB:2.79:Cannot Connect To Internet (13) fp


    It seems as if many people have this issue, and so far I have called Directv (many times) and Cisco/Linksys (numerous times, they sent me to a paid service, I paid for it, but no success yet). I just love the fingerpointing.

    Here is my setup: Cisco/Linksys WET610N connected to the top Enet port of the H21-100 HDDVR box. Wireless connection to my Apple Airport extreme router. WPA/WPA 2 security with password.

    The WET610N is seen by my router. When I go through the Directv setup, it detects the wireless adapter (wet610N). I then get the Internet (13) status, cannot connect to the internet. Tried numerous reboots of all devices, including the HD box. Tried without the WPA/WPA2 security, not working that way either. (that confuses me - I don't see how the hd box would get the password, unless it gets it from the wet610N, but on these forums it seems like people have connected with security??)

    Tried the bottom enet port too..

    any other ideas?

    thanks

  • RELEVANCY SCORE 2.79

    DB:2.79:(Bug) Wifi Connect Problem With @ In Wpa Password ak


    hello, my bug is simple.. with wifi network that have a @ in passkey phrase all my nokia can't connect at all. i have a c7 (with anna update) and E6 (anna by default). all problems gone with a "normal" passkey...

    DB:2.79:(Bug) Wifi Connect Problem With @ In Wpa Password ak

    Alcyon972 wrote:
    hello, my bug is simple.. with wifi network that have a @ in passkey phrase all my nokia can't connect at all. i have a c7 (with anna update) and E6 (anna by default). all problems gone with a "normal" passkey...
    No,it's not a bug. It's just not allowed to use special characters in the passphrase.




    ‡Thank you for hitting the Blue/Green Star button‡

    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • RELEVANCY SCORE 2.79

    DB:2.79:Wg302 Wpa Mac Powerbook p7


    I have installed a new WG302. It is using WPA/WPA2 and is working great for PCs running XP. The Macintoshes running OS X 2.4.8 Tiger cannot connect. The airport utility sees the SID, undertands it needs to use WPA-Personal, asks for password, but when entered errors out. Any suggestions?

  • RELEVANCY SCORE 2.79

    DB:2.79:Wet610n Wpa Connection Problem With Wgt624v2 Wireless Router zm



    I'm having trouble connecting my new WET610N bridge to my Netgear WGT624 v2 wireless router when using WPA.

    The WGT624 appears to support WPA but lists it only as WPA-PSK and supports a passphrase of 8-63 chars. I've tried different channels, different passphrase lengths, and different unrelated settings.

    I can connect these two devices with WEP, and with protection disabled, but cannot connect them using WPA.

    Is the WPA support in these two devices incompatible?

    WGT624 v2 with firmware V4.2.11_1.0.1

    WET610N with firmware 1.0.03 build 351

    DB:2.79:Wet610n Wpa Connection Problem With Wgt624v2 Wireless Router zm

    I did a search at the wifi alliance certification for your device.

    (All Netgear wireless routers should be here:
    http://www.wi-fi.org/search_products.php?search=1​advanced=1〈=enfilter_company_id=145filter_catego​ry_id=1filter_subcategory=filter_cid=date_from=​date_to=x=46y=13
    )

    I found the WGT624 and WGT624v3, but not the v2 that you mention.
    Could it be that Netgear had a messup here and couldn't pass certification? Or maybe they just forgot to?
    Or being optimistic, maybe it is so similar to v1 or v3 that they didn't need to recertify.

    If they failed WPA certification, then you might be out of luck, unless you resort to lousy WEP, or upgrade the router.

  • RELEVANCY SCORE 2.79

    DB:2.79:Wep Vs Wpa p7



    7410 all-in-one asks for WEP password but my wireless is WPA. How do I get the 7410 to allow me to enter a WPA instead of a WEP?

    DB:2.79:Wep Vs Wpa p7


    7410 all-in-one asks for WEP password but my wireless is WPA. How do I get the 7410 to allow me to enter a WPA instead of a WEP?

  • RELEVANCY SCORE 2.79

    DB:2.79:Wireless Printer Can't Connect To Airport Network mc


    I recently installed the new airport extreme (n) to replace my old router. I set up the wireless network with WPA protection and my computers and airport express work fine. However, I have been unable to get my HP all-in-one wireless printer to connect. The printer connects fine if I set up the network without security.

    HP is suggesting that I set up my printer with a "WEP equivalent key" to my WPA password.

    Can anyone tell me where I can get a "WEP equivalent key" to WPA? HP won't say and is suggesting I call Apple.

    DB:2.79:Wireless Printer Can't Connect To Airport Network mc

    It is supposed to support WPA, that's what's so frustrating. I may try changing passwords before going to WEP. thanks.

  • RELEVANCY SCORE 2.79

    DB:2.79:Connection To Company Network 91


    I am trying to connect my iPOD Touch to a WPA/WPA2 network in my office, I am able to see the network after configuring the network name, type, and password, but then when I connect I got a message saying that it is not able to connect. what I am missing?

    DB:2.79:Connection To Company Network 91

    Thanks, but I realise minus points for bad spelling

    Get well soon,

    Dud.

  • RELEVANCY SCORE 2.79

    DB:2.79:Ibook G3 Won't Connect Wireless With Wpa Personal cj


    I recently installed a Linksys WRT54G2 wireless router (replacing older SMC wireless). I have a MBP that connects fine with WPA Personal. Our iBook (10.4.11) using an 'original' Airport card will connect with WEP or without wireless security, but will not connect with WPA. WPA is available in the Airport Connection dialog, but when I type in the password, I get the error message that it failed to connect.
    Doug

    DB:2.79:Ibook G3 Won't Connect Wireless With Wpa Personal cj

    If it does not appear for you under Software Update, then it is likely that it has already been installed.

    It should appear as a separate download there if it hasn't already been downloaded.

  • RELEVANCY SCORE 2.79

    DB:2.79:Macbook Core2 Duo Will Not Save Wpa Keychain Or Connection Timeout c1


    I have both laptops running Leopard 10.5.1 with all patches applied. At home I can connect to my wireless network with both. At work the new Core2 Duo will not connect or save the WPA password in the key chain. The error I get is "Connection timeout"

    Working : FA254LL/A
    NOT Working : FB061LL/B

    My WIFI chipset is at 152 F

    DB:2.79:Macbook Core2 Duo Will Not Save Wpa Keychain Or Connection Timeout c1

    I'm running Macbook w/10.4.11 and experiencing the same problem when my college IT dept. attempts to add a WPA2 key. WPA personal and WEP keys are saved without issue. The WPA2 key will is not saved after the initial connection is made.

    This seems to be a widespread issue, based on some of the web postings I've read. Has anyone seen any type of a response from Apple?

  • RELEVANCY SCORE 2.79

    DB:2.79:Need Help !!! fz


    I live in a building that is wired for directv. In my apartment they put only one line in the living room for directv. I want to have directv in my two bedrooms. Can i use a deplexer or a multi switcher? because i heard u cant split directv.

    DB:2.79:Need Help !!! fz

    I live in a building that is wired for directv. In my apartment they put only one line in the living room for directv. I want to have directv in my two bedrooms. Can i use a deplexer or a multi switcher? because i heard u cant split directv.

  • RELEVANCY SCORE 2.79

    DB:2.79:Printer Connection pc


    Trying to connect printer to new U Verse router. ATT would not do it. Go through all steps, (password), etc., it keeps asking for a WPA passphrase. Is this the same as the password on the router, because when I enter it it still asks for the WPA passphrase! As a result my printer won't work

    DB:2.79:Printer Connection pc


    Hi whynot2day,

    Welcome to the HP Forums.

    I see that you are having an issu with the printer connection to the router.

    So I can better assist you, Please respond with your printers Model Number.

    How Do I Find My Model Number?

    Write back when you have time and I will be happy to help.

    Cheers,

  • RELEVANCY SCORE 2.79

    DB:2.79:Cant Connect To A Wireless Network 1m


    Can someone help me..I don't know much about this stuff..I have a netgear 24 g wireless router..I an using my hp notebook ...my boyfriend is a control freak n first disabled wireless router..but I think he just changed the network key cuz my son can connect to his xbox..n the tenants downstairs are using it too..network auth states wpa psk n data encryption is tkip.....I tried old password n it dosnt connect stating acquring network addres n it wount connect...please help.....

    DB:2.79:Cant Connect To A Wireless Network 1m

    you will need to use most updated encryption key and if not working at all.

    either the wireless mode and encryption is not suitable for the pc has issue with. best to ask your BF and change the setting and while both can test at same time to make sure ALL devices will work with certain settings

  • RELEVANCY SCORE 2.79

    DB:2.79:Ts1398 Ipad2 Connection 7j


    i have an ipad2 and it connect to my home Wi-Fi connection that has a WPA/WPA2 with a password and never ask for the password and it just connect.Can you give me a reason why it connect with out the password??This is a new IPAD2.

    DB:2.79:Ts1398 Ipad2 Connection 7j

    Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199Additional things to try.Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router then back On. Now boot your iPad. Hopefully it will see the WiFi.Go to SettingsWi-Fi and turn Off. Then while at SettingsWi-Fi, turn back On and chose a Network.Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.htmlAnother thing to try - Go into your router security settings and change from WEP to WPA with AES.How to Quickly Fix iPad 3 Wi-Fi Reception Problemshttp://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/If none of the above suggestions work, look at this link.iPad Wi-Fi Problems: Comprehensive List of Fixeshttp://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE~~~~~~~~~~~~~~~If any of the above solutions work, please post back what solved your problem. It will help others with the same problem. Cheers, Tom

  • RELEVANCY SCORE 2.79

    DB:2.79:Cannot Connect To Wpa Protected Wifi Using Netcfg d1



    This is the setting in networkmanagers nm-applet and it connects flawlessly. http://i.imgur.com/5VuL6.png

    I tried doing the same configuration in netcfg and this is my config file.
    CONNECTION=wireless
    INTERFACE=wlan0
    SECURITY=wpa-configsection
    ESSID=my essid
    IP=dhcp
    CONFIGSECTION=
    ssid=essid
    key_mgmt=WPA-EAP
    eap=PEAP
    group=CCMP
    pairwise=CCMP
    identity=foobar
    password=pass
    priority=1
    phase2=auth=MSCHAPV2

    DB:2.79:Cannot Connect To Wpa Protected Wifi Using Netcfg d1


    Probably too late to respond on this, but I had the same pattern in my debug output. This is how I solved it:

    https://bbs.archlinux.org/viewtopic.php … 4#p1150234

  • RELEVANCY SCORE 2.79

    DB:2.79:Cck Was Working Wep Not Working Wpa fa



    I have a Cinema connection kit that was working with wep when I had ATT. I switched to comcast and WPA and now the CCK sees the router but claims that the password is incorrect. Any ideas on how to solve this would be great. Calling directv got me nowhere the first time.

    DB:2.79:Cck Was Working Wep Not Working Wpa fa

    try holding the reset button on the back of the CCK-W for 30 seconds. then on your HDDVR press

    MENU ➜ SETTINGS HELP ➜ SETTINGS ➜ NETWORK SET UP ➜ RESTORE DEFAULTS ➜ CONNECT NOW ➜ GET CONNECTED ➜ WIRELESS. the receiver will then scan for Wi-Fi networks and should d find yours. once it finds your SSID, select your network name. if your network is secured, it will ask you to type in your password. if successful, you will get a message that says "congratulations, your receiver is connected to the internet"Note that your SSID and/or password cannot have any spaces and/or special characters

  • RELEVANCY SCORE 2.79

    DB:2.79:E61i Wpa Wlan Not Working mp


    Hi,

    I have D-Link WLan router.

    From my E61i I am unable to connect.

    currently the WLAN router supports WPA mode.

    My E61i trying for long to connect.....

    if there is no password protection then its working fine.

    what could be the reason.

    Should I change it to WEP mode?

    sudipta

    DB:2.79:E61i Wpa Wlan Not Working mp

    I think u should add the WLAN MAC address to the router.
    I had the same problem with me in my company and the tech specialist told me to add the mac address to the router in order ot use the wi-fi

  • RELEVANCY SCORE 2.78

    DB:2.78:Help Cannot Connect New Nook Touch To Router js



    i have connected my Ipad, DVR/Netflix, older Nook with no problem. Now it won't take the password, telling me that the network password is not correct. I know it is. It automaticaly conects with WPA/WPA2/PSK.

    DB:2.78:Help Cannot Connect New Nook Touch To Router js


    http://bookclubs.barnesandnoble.com/t5/NOOK-Simple-Touch-Support/Nook-WiFi-Connection-Issues-amp-Ver...

    instructions from bn support link:

    Nook WiFi Connection Issues Verizon Actiontec Router

    1. Go to your router's IP address (you may have to call your cable provider to obtain this if you don't have it or simply connect through the computer wired to the router)

    2. Type in your user name and password

    3. Turn on your nook

    4. Click on your network within wireless settings and "Forget" the network

    5. Go back to the main settings page, go to Device Info, About Your Nook, and locate the Wi-Fi MAC address

    6. (This part is router specific but if you can figure out where this information is in your router, the steps should be the same) Go to Advanced -- IP Address Distribution

    7. Hit the button that says Connection List

    8. Look for your Nook's MAC address on your list. If it is there, press the Edit button (the notepad with the pencil) and click the box that says static IP.

    9. If it is not there, scroll to the bottom and hit New Static Connection.Enter a host name (no spaces), the IP address that you want to use (be sure that it's a valid address. Look at your other addresses on the connection list page to see one within the correct number range that is available), and that MAC address from your Nook.

    10. Hit apply, go back to your Nook's wireless settings, re-enter your password, and you should be good to go!!!

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------

    that worked for me

  • RELEVANCY SCORE 2.78

    DB:2.78:Wet610n Won't Connect To Wpa 98



    I have a WRE54G2 as my main router. I got DirecTV this past week so I purchased a WET610N. I had everything set to use WPA2 and things were working great. However, my wife soon complained that the signal in our living room was degraded, so I went out and purchased a WRE54G to extend the range in the living room. It took a little while to get setup, but had to switch everything back to WPA. Everything seems to be working except the WET610N. I got to set it up with WPA, get the warning dialogue box that using WPA the WET610N will only run at G levels. I input all my info and everything seems good and hit the save and get the progress bar. However when it finishes I continue to get the link status is disconnected. I've reset it back to factory many times, but still no joy.

    My router settings are as follows:

    Channel 6

    WPA Personal - TKIP

    Group Key Renewal 3600

    If anyone has run into this problem I would really like to figure this out.

    DB:2.78:Wet610n Won't Connect To Wpa 98

    I agree with maklotski. To streaming Videos or Music through your G series router, you wont get the best performance.To Stream Videos and Music you need to get an N Series Router.

  • RELEVANCY SCORE 2.78

    DB:2.78:Unable To Connect Wpa 2 Enteprise Network In My Office On Nokia Lumia 925 x1


    Hi,

    I am trying to connect WPA 2 Enterprise network in my office using my Lumia 925, I have also tried on Lumia 620 but its also showing the same error.
    While doing so I am getting error as Couldnt sign in after entering my credentials (Domail\Username and Password).
    One of my colleague is having Lumia 710 and he has no issue connecting to the network.
    Need help urgently.
    Thanks

    Regards,
    Piyush

    DB:2.78:Unable To Connect Wpa 2 Enteprise Network In My Office On Nokia Lumia 925 x1

    Hi,

    I have the same problem, and I've found a trick to make it works. I have to surf first on the intranetonpages where they may ask for the credentials because the IExplorer doesn't take the ones you have entered in the wifi configuration. This should be
    fixed a.s.a.p.

    After that, you can surf the web, but none of the apps that needs data transfer will work, except email in my case, maybe because it uses port 80.

    I think that by pass proxy list or configuration by url (p.e. and url with a .pac file) on proxy configuration, and credential vault should be deployed to make the wifi works properly.

    Regards.

  • RELEVANCY SCORE 2.78

    DB:2.78:Connecting Directv Cinema Wireless Connection Kit p9



    I am trying to connect my new DirecTV Cinema connection kit and keep getting an error saying that my wireless security key was not accepted. So far I have reset the kit, reset my receiver (and restored default settings), reset my router, changed SSID and password to not include special characters, and tried my other receiver. All of my other wireless devices connect with no problem so I am sure the security key was correct. Also my laptop sees a strong signal in the same location as the Cinema connection kit. Any ideas?

    Reciever is HR21/700

    SWM connection

    router is Netgear WGT624 WPA security.

  • RELEVANCY SCORE 2.78

    DB:2.78:Configure Wpa Or Wep With Xbox 360 fa


    I wanted to set up WEP or WPA password on my connection so no one can get in without the password but when i did i can't connect to my xbox live on xbox 360..any ideas? I have wrt54g v2.0

    DB:2.78:Configure Wpa Or Wep With Xbox 360 fa

    On the main menu of theXBOX, use your joystick to click on settings, network settings, then click on advanced, then click on wireless, then click on settings, then click on security key. There it will allow you to input your wep key.

    Hope this will help.

  • RELEVANCY SCORE 2.78

    DB:2.78:N97 Wlan Problem With Connect Using Wpa/Wpa2 pj



    i try to connect to wlan

    EAP-PEAP
    Network Status: "Public"WLAN network mode: "Infrastructure"WLAN Security Mode: "WPA/WPA2"WPA/WPA2: "EAP"WPA2 only mode: "Off"Personal Certificate: "Not Defined"Authority Certificate: "AddTrust External CA Root".Username in use: "User Defined"User name: correctRealm in use: "User defined"Realm: leave blank.Allow Peapv0
    "EAP-MSCHAPv2" is enabled

    user and password correct

    when try to connectuser and password screen appears and i wrote them correctly

    but when press ok to connect. It try to connect and then the screen appears again

    so please help

    note : i export the certificate from my Internet Explorer. OS : Win 7

    DB:2.78:N97 Wlan Problem With Connect Using Wpa/Wpa2 pj


    Hi HossamS,

    Welcome to Nokia discussions board!

    In order to fix this issue, I advise you to perform a soft reset on your phone: type *#7780#. Default lock code is 12345.If the issue persists, perform a hard reset. First of all, back up your data usingNokia Suite(Tools Back up). Once your data is fully backed up, type *#7370# on the keypad.

    Alternatively, you may also check for updates on Nokia Suite (by going to Tools Updates).

    Let us know how you get on and feel free to post any other questions you may have.

    Regards,

    astra2025




    Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • RELEVANCY SCORE 2.78

    DB:2.78:Has Anyone Been Able To Use Wpa Security To Connect Directv Wireless Connection Kit? 18



    I was able to connect wireless connection kit with WEP security, but would prefer to use WPA. I keep getting error saying security key not accepted. I am positive I entered the code correctly and that it does not contain any special characters. I have reset everything multiple times. I also tried connecting the kit to my PC directly and entered the security information there. I was able to talk to the connection kit and set the security type, network name and security code. It would scan for networks and find my network, but when I tried to connect, it just went to the page where I entered the network name and security information and stopped there. My DVR is an HR21. Has anyone else been able to connect with WPA?

    DB:2.78:Has Anyone Been Able To Use Wpa Security To Connect Directv Wireless Connection Kit? 18


    I'm running WPA2/WPA Mixed Mode on my Linksys router and it works just fine. The security key not accepted is often due to some punctuation in either the network name (SSID) or in the password. Make sure it's letters and numbers only and that you observe the upper and lower case rule.

    It's hard to know what you've done precisely when you post "I have reset everything multiple times". What's everything and how did you reset? Did you follow one of the sequences I've posted elsewhere in the forums?

    If you post back, give us the model number of the adapter. If the new model, you are connecting via Ethernet to the top port of the DVR?

  • RELEVANCY SCORE 2.77

    DB:2.77:Cant Connect Despite Keying In The Correct Wpa Password p9


    Hi, i have a problem with my wireless router. My wireless router is connected to my desktop and i set a wpa key to my network so that only my bro and sisters laptop is able to access my wireless network. The problem im facing now is,my sisis unable toaccess my network despite entering the correctwpa key. I have tried numeroustimes butshe is till unable to access my network. The only time my sis is able to connect to my network is if i set it in unsecured mode.What should i do?

    DB:2.77:Cant Connect Despite Keying In The Correct Wpa Password p9

    My bros laptop is able to connect both unsecured and secured. My sis laptop is only able to connect in unsecured mode. Once i secure it wit a wpa key, it doesnt connect at all. I have not tried other networks yt cos there wasnt any other available network in her list except mine.

  • RELEVANCY SCORE 2.77

    DB:2.77:My Wifi Network Is Using Wpa- Personnal With Aes. I Am Unable To Connect My Iphone 4s To It . I Have Tried Using Wpa And Wpa2. Any Reasons? a3


    My WIFI network is using WPA- Personnal with AES. I am unable to connect my IPHONE 4S to it . I have tried using WPA and WPA2. Any reasons?

    DB:2.77:My Wifi Network Is Using Wpa- Personnal With Aes. I Am Unable To Connect My Iphone 4s To It . I Have Tried Using Wpa And Wpa2. Any Reasons? a3

    My WIFI network is using WPA- Personnal with AES. I am unable to connect my IPHONE 4S to it . I have tried using WPA and WPA2. Any reasons?

  • RELEVANCY SCORE 2.77

    DB:2.77:Macbook Pro Keeps Asking For Wpa Password d3


    Hello,Can anyone tell me why, when connecting to my wireless router I get asked for my WPA password?Why, when I enter my WPA password does connection timout occur?If I restart my MacBook and try to connect, I'm asked for my WPA password, I enter it and everything works fine.Does anybody know how to stop being asked for my WPA password?Thanks,BC.

    DB:2.77:Macbook Pro Keeps Asking For Wpa Password d3

    Hello,Can anyone tell me why, when connecting to my wireless router I get asked for my WPA password?Why, when I enter my WPA password does connection timout occur?If I restart my MacBook and try to connect, I'm asked for my WPA password, I enter it and everything works fine.Does anybody know how to stop being asked for my WPA password?Thanks,BC.

  • RELEVANCY SCORE 2.77

    DB:2.77:Tivo To Directv mm


    How do I connect my tivo to the directv?

    DB:2.77:Tivo To Directv mm

    How do I connect my tivo to the directv?