• RELEVANCY SCORE 3.32

    DB:3.32:"Failed To Respond" Victims Try This V.2 zp





    A while ago I experienced a troublesome "Failed to Respond" error and found a solution/workaround - here is that thread:
    http://discussions.apple.com/message.jspa?messageID=1023629#1023629

    I recently tried to chat after a prolonged period of time and was met by my old nemesis, "Failed to Respond". After reading countless posts and changing numerous settings on my router, iBook and then my hardwired G4 I was running out of ideas.
    I only chat with my folks and they said nothing had changed on their end however for the sake of troubleshooting I had my dad bypass his router and plug directly into the cable modem - it worked like a champ!

    True, I do not know what is causing the problem on his end but the workaround is successful. So add this one to your arsenal of troubleshooting tips and it may pay off.

    DB:3.32:"Failed To Respond" Victims Try This V.2 zp

    A while ago I experienced a troublesome "Failed to Respond" error and found a solution/workaround - here is that thread:
    http://discussions.apple.com/message.jspa?messageID=1023629#1023629

    I recently tried to chat after a prolonged period of time and was met by my old nemesis, "Failed to Respond". After reading countless posts and changing numerous settings on my router, iBook and then my hardwired G4 I was running out of ideas.
    I only chat with my folks and they said nothing had changed on their end however for the sake of troubleshooting I had my dad bypass his router and plug directly into the cable modem - it worked like a champ!

    True, I do not know what is causing the problem on his end but the workaround is successful. So add this one to your arsenal of troubleshooting tips and it may pay off.

  • RELEVANCY SCORE 2.84

    DB:2.84:Failed To Respond mm





    Whenever I try to chat with my mother (she is using AIM and PC) I have to try about 4-5 times. Everything looks good until I get a message saying that I failed to respond. What is this? How can I fail to respond, when I am sending the invite?

    "D"

    DB:2.84:Failed To Respond mm

    Hi Dana,

    If you are trying to One-Way Video it may pay for her to do the "Tuning" even if she has no camera or Mic. The instructions are the sam e for AIM 5.5 and 5.9 Only the accesss to the Properties is different.
    In AIM 5.9 it is via the MY AIM menu Options Properties.

    10:27 PM Sunday; March 5, 2006

  • RELEVANCY SCORE 2.79

    DB:2.79:Server Does Not Respond m7





    When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.

    Can someone help me with this?

    DB:2.79:Server Does Not Respond m7

    Same problem here. I've resent the ovi sync settings by sms to my mobile + saved the settings. I continue to ge message server does not respond.

  • RELEVANCY SCORE 2.77

    DB:2.77:Ovf Export Is Not Working 81



    Hello All, When we try to export OVF getting the " The request failed because the remote server "xxxx" took long to respond" error. Please let me know if you have seen this error. vCenter version : 5.5 u2 Error stack Call "OvfManager.CreateDescriptor" for object "OvfManager" on vCenter Server "xxx" failed. -Suresh

    DB:2.77:Ovf Export Is Not Working 81


    When we use webclient it is working! -Suresh

  • RELEVANCY SCORE 2.76

    DB:2.76:Unable To Connect To Console From Vi Client...Vc/Ssl Error? 3f



    I've recently moved one of my ESX servers into the production network and I was able to change the IP info and add it back into VC and the cluster. I am now seeing a problem where I cant connect via the VI client direct to the host nor the console tab in VC. When I click on a running VM and try to go to the console, after a few minutes I get this error:

    "Cannot connect to host xxxxx: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond"

    I know the host itself is good because i have running VM's that I can reach via ssh and RDP so Im at a loss here.

    Thanks!

    DB:2.76:Unable To Connect To Console From Vi Client...Vc/Ssl Error? 3f


    Thank you for the fast response....

    but it seems to still happen even after blowing away the SSL files and restarted the mgmt-vmware service. Do I need to remove the host from VC entirely after deleting the files?

  • RELEVANCY SCORE 2.70

    DB:2.70:The Attempt To Burn Disc Failed. The Device Failed To Respond Properly..... 97


    To my great joy the message below has started popping up as of today and Burning a Cd is impossible .... has anybody else encountered this problem and if so is there a solution ? . .

    The attempt to Burn Disc Failed. The device failed to respond properly, unable to recover or retry.

    Thanks

    Rex

    DB:2.70:The Attempt To Burn Disc Failed. The Device Failed To Respond Properly..... 97

    Oh and I should preface that with my frustration being at Apple and not with those who post on these boards. I've had wonderful solutions for various mac related problems that I have gleamed from here, I just figured someone might have figured out what the issue was. I wish I was more technically proficient but that has never been my strong suit.

  • RELEVANCY SCORE 2.65

    DB:2.65:Upgraded To Windows 8.1 Broke Flash/Air/Anes 3x



    Here is the problem, been using Flash/AIR for years to build AIR powered apps. Recently built a new system running Windows 8.1

    I transfer all my work over from the old Windows 7 machine and open up the .fla files, fix the links and test the file, here is the error.

    The content cannot be loaded because there was a problem loading an extension: Error: Requested extension com.distriqt.Camera could not be found.
    XPath error : Invalid expression
    /userSettings/victims/*[exact_name='adl.exe']/(null)[1]/*[1]
    ^
    XPath error : Invalid expression
    /userSettings/victims/*[exact_name='adl.exe']/(null)[1]/*[1]
    ^
    XPath error : Invalid expression
    /userSettings/victims/*[exact_name='flash.exe']/(null)[1]/*[1]
    ^
    XPath error : Invalid expression
    /userSettings/victims/*[exact_name='flash.exe']/(null)[1]/*[1]
    ^
    XPath error : Invalid expression
    /userSettings/default/(null)[1]/*[1]
    ^
    XPath error : Invalid expression
    /userSettings/default/(null)[1]/*[1]

    So seems like the .ane files are breaking the file somehow. So I make a blank file with nothing on it and it runs. Then I just add the .ane file into the publish settings and that breaks the app.

    Anyone have any clue what is causing this. Is there some inherent incompatibility between AIR or ANEs and Windows 8.1? BTW I tested with the latest SDK 15.0.0.302 both in CC and CC2014.

    DB:2.65:Upgraded To Windows 8.1 Broke Flash/Air/Anes 3x


    Well switched back to Windows 7 and all seems to be working but had the same issue at first. My guess is that it was caused by the old files looking for something from the OLD machine in the C:\Users\UserName\AppData\Local\Temp folder. When this error originally came I up I went and found the files it was asking for on the old machine and copied to the new. This I believe is where the error above started causing issues, the .fla was looking for some sort of old extracted versions of the file which it was not finding due to new drive paths and only when I switched to 7 and instead of copying old files over, I deleted the folder it was looking for, did I resolve this although I am still not 100% certain that was the case. I also had issues with Flash not recognizing plugged in devices when trying to publish to device and going back to 7 solved this as well so I think Ill stick to 7 for now till 10 comes out but I wrote this up in case someone one day runs int this problem.

  • RELEVANCY SCORE 2.65

    DB:2.65:Error At Data Analysis / Project Server 2007 : A Connection Attempt Failed.... da


    Hi,
    We have some
    cases at my organization thatusers that try to access Data analysis and get the following:
    No Details:
    The query could not be proceed
    The following system error occurred:A connection attempt failed because the connected party did not properly respond after a
    period of time, or established connection failed because connected host has failed to respond.

    Please Advise
    Asaf

    DB:2.65:Error At Data Analysis / Project Server 2007 : A Connection Attempt Failed.... da

    Hi Asaf,
    You might also want to check to make sure the appropriate software is installed on the users' computers. You need Microsoft SQL Server 2005 Analysis Services 9.0 OLE DB Provider (if you are using SQL Server 2005) from the SQL Server 2005 Feature Pack
    (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=536fd7d5-013f-49bc-9fc7-77dede4bb075displaylang=en) or the Microsoft
    SQL Server 2008 Analysis Services 9.0 OLE DB Provider from the SQL Server 2008 Feature Pack (http://www.microsoft.com/downloads/en/details.aspx?FamilyId=C6C3E9EF-BA29-4A43-8D69-A2BED18FE73Cdisplaylang=en)http://blogs.umtsa.co.za/nicoo

  • RELEVANCY SCORE 2.65

    DB:2.65:Ftc Sues Spyware Distributor x3


    FTC alleges that Sanford Wallace distributed spyware that created pop-up ads on victims' computers in order to sell his company's anti-spyware software.

    Read this article HERE.

    Bill



    ___________________________________________________________________Good judgement comes from experience, most of which came from bad judgement.

    DB:2.65:Ftc Sues Spyware Distributor x3

    Yes and Brian yelped at me for using that work, when I asked why it was considered a bad word. I will have to admit that the general use in here, would be inappropriate.Except where the govt. is concerned, we all know that fits to a tee.

    Naddie



  • RELEVANCY SCORE 2.63

    DB:2.63:I Cant Respond To Craigslist Adds. zc


    When ever I try to respond to an add on craigslist it tells me my default email is not set up properly. Help me pleas this is really irritating me. I can receive email throw them but can't respond.

    DB:2.63:I Cant Respond To Craigslist Adds. zc

    maybe the prospective employers weren't impressed by your typos and lack of capitalization

  • RELEVANCY SCORE 2.61

    DB:2.61:Seam Mail Times Out Seding To Long Lists Of "Victims" kp


    Some people have images that I pop into the email (this is fetched as easy user can have an associated image).
    You can see (below in first stack trace) that eventually something times out and I get a Lazy exception.
    I now have to do three attempts to get the emails sent.
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    @End
    public String sendToMailingList() {
    try {
    recipients = new ArrayListUser();
    ListUser remainingRecipients = new ArrayListUser();
    if (testOnly) {
    User tony = (User) entityManager.createQuery("from User u where u.email = :email").setParameter("email", "tony.herstell@selwynequestriancentre.co.nz").getSingleResult();
    recipients.add(tony);
    } else {
    MailingListBuilder mailingListBuilder = new MailingListBuilder();
    recipients = mailingListBuilder.getMailingList(entityManager);
    boolean okToAdd = false;
    for (User eachUser : recipients) {
    if (eachUser.getEmail().equalsIgnoreCase("juanita@snap.net.nz")) {
    okToAdd = true;
    } else {
    if (okToAdd) {
    remainingRecipients.add(eachUser);
    }
    }
    }
    }

    // Add these line to make sending of email non-asynch
    Contexts.getEventContext().set("recipients", remainingRecipients); // recipients or remainingRecipients
    renderer.render("/WEB-INF/pages/mailingList/mailingListEmailWrapper.xhtml");

    // Add this line to make sending of email asynch
    //asynchronousMailProcessor.scheduleSend(3000, recipients);
    statusMessages.addFromResourceBundle(Severity.INFO,"mailing_list_emailed_successfully");

    log.info("Mailing List Email(s) sent!");
    } catch (Exception e) {
    log.error("Mailing List Email(s) sending failed: "+e);
    }
    return "success";
    }

    DB:2.61:Seam Mail Times Out Seding To Long Lists Of "Victims" kp

    Some people have images that I pop into the email (this is fetched as easy user can have an associated image).
    You can see (below in first stack trace) that eventually something times out and I get a Lazy exception.
    I now have to do three attempts to get the emails sent.
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    @End
    public String sendToMailingList() {
    try {
    recipients = new ArrayListUser();
    ListUser remainingRecipients = new ArrayListUser();
    if (testOnly) {
    User tony = (User) entityManager.createQuery("from User u where u.email = :email").setParameter("email", "tony.herstell@selwynequestriancentre.co.nz").getSingleResult();
    recipients.add(tony);
    } else {
    MailingListBuilder mailingListBuilder = new MailingListBuilder();
    recipients = mailingListBuilder.getMailingList(entityManager);
    boolean okToAdd = false;
    for (User eachUser : recipients) {
    if (eachUser.getEmail().equalsIgnoreCase("juanita@snap.net.nz")) {
    okToAdd = true;
    } else {
    if (okToAdd) {
    remainingRecipients.add(eachUser);
    }
    }
    }
    }

    // Add these line to make sending of email non-asynch
    Contexts.getEventContext().set("recipients", remainingRecipients); // recipients or remainingRecipients
    renderer.render("/WEB-INF/pages/mailingList/mailingListEmailWrapper.xhtml");

    // Add this line to make sending of email asynch
    //asynchronousMailProcessor.scheduleSend(3000, recipients);
    statusMessages.addFromResourceBundle(Severity.INFO,"mailing_list_emailed_successfully");

    log.info("Mailing List Email(s) sent!");
    } catch (Exception e) {
    log.error("Mailing List Email(s) sending failed: "+e);
    }
    return "success";
    }

  • RELEVANCY SCORE 2.59

    DB:2.59:[Request Failed] md


     
    Hi Group ,
     
    I created webtests and placed them in order test then i Run those tests ,, but i faced this Error which cuz the test to Fail ...
     
    [Request failed: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 207.46.250.101:80 ....] ...
     
    How to fix that ???
    and why it displayed ???
     
     
    Thanks in advance

    DB:2.59:[Request Failed] md

     
    Hi  Michael Koltachev :
     
    Yes this problem happened also when I run this webtest not a part  of  ordertest ....
     
    I post this problem in [Web Load testing forum:] ,,,
     
     
    Thanks ...

  • RELEVANCY SCORE 2.58

    DB:2.58:How To Find A Word In String ps


    I have a string like this further build a prudent reserve in light of the various uncertaintiesBranch. 1I recognize that diesel enforcement is important, these augmentationslight of this, and the lack of workload justification for the 6.7Branch. 2Californians from the effects of last winter's severe weatherconditions. This reduction in funding is possible due to a decreasein the number of disaster victims being served and a reducedtimeframe that these victims will require services. This action willin no way affect the services being provided to victims of the freezeI want to make a regex to get the string from Branch 1 to Branch 2 and Actually I am searching for Branch word when itfound then read data until next Branch word is found. How can i create Regex for this. I am new in this world.Thanks in advance Its me the bad one

    DB:2.58:How To Find A Word In String ps

    OK I got it. But Now I am only getting the first Break paragraph. How can I get all.I mean how can I put loop in reguler expression. Its me the bad one

  • RELEVANCY SCORE 2.58

    DB:2.58:Using Socket Inside Sql Clr Procedure? kd


     
    I have prepared code wcich is connecting to socket and send some data – it works fine. After that I move this to SQL CLR Procedure and instal in SQL but while executing I get:
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 0.0.0.1:7611
    I try to set PERMISSION_SET to UNSAFE and EXTERNAL_ACCESS, serializable assembly is also registed. Where is the problem?

    DB:2.58:Using Socket Inside Sql Clr Procedure? kd

    How did this methodology work out for you? I'm curious about taking the same approach for doing some multicast from within a long-running SQL CLR stored procedure. Any feedback?

  • RELEVANCY SCORE 2.57

    DB:2.57:Unable To Upload Udf To Azure kf


    I'm following this guidance to upload my UDF to Azure so I can offload Excel calculations on Azure nodes:
    http://technet.microsoft.com/en-us/library/gg481808(WS.10).aspx#BKMK_XLL
    I've packed the DLL, but when I try to upload, it times out with the error:
    ...Error while uploading the package to Azure, message: A connection attempt failed
    because the connected party did not properly respond after a period of time, or
    established connection failed because connected host has failed to respond 207.
    46.59.78:80...
    I'm able to create Azure nodes w/o problems, so I doubt it's a firewall issue?
    Thanks!

    DB:2.57:Unable To Upload Udf To Azure kf

    I'm following this guidance to upload my UDF to Azure so I can offload Excel calculations on Azure nodes:
    http://technet.microsoft.com/en-us/library/gg481808(WS.10).aspx#BKMK_XLL
    I've packed the DLL, but when I try to upload, it times out with the error:
    ...Error while uploading the package to Azure, message: A connection attempt failed
    because the connected party did not properly respond after a period of time, or
    established connection failed because connected host has failed to respond 207.
    46.59.78:80...
    I'm able to create Azure nodes w/o problems, so I doubt it's a firewall issue?
    Thanks!

  • RELEVANCY SCORE 2.57

    DB:2.57:Graphing Engine Is Not Responding. 1k


    An error occurred during connect to "IP_Address:9810". A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. [Socket:1500]Can anyone help in solving this issue ?

    DB:2.57:Graphing Engine Is Not Responding. 1k

    what's the url you are using to connect analytics ip address / hostname?thanks,Saichand

  • RELEVANCY SCORE 2.57

    DB:2.57:A Dispute On Family And Friend Transfer? Help Needed. s3



    HiGuys and Paypal staffs,

    I recently tried to purchase something from somebody in a facebook group. He asked me to use friend and family transfer and I did so.

    However, few days after I found out that the seller was actually scamming people by selling the same item to many people, and he wasn't going to send the items to us.

    I contacted some other victims and I was told that some victims report it to paypal. I was told by other victims that I need to call Paypal and file a dispute on my payment.

    A group of victims from America (who also used family and friend transfer) have already done so successfully.

    However, when I call the UK paypal, they told me that they cannot file a dispute on my payment since it is a personal transfer.

    So would you please provide some help because if you investigate into that account, there will be many disputes on it.

    I really need some help on this because I do not want my money to go to a scammer. And also, some other victims have already been helped.

    Much appreciate for any help.

  • RELEVANCY SCORE 2.55

    DB:2.55:Wlc Log Radius Server Failed To Respond To Request 8c



    I'm keep on getting same couple MACs being failed.  I was hoping somebody has more inside about this?  Radius server is pingable from WLC. People are authenticating.  Please let me know what log should I provide.  Thank you in advance.

    Thu Feb 20 16:22:06 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 78) for client 3c:a9:f4:42:11:a0 / user 'unknown'3Thu Feb 20 16:22:06 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 77) for client 24:77:03:20:78:d0 / user 'unknown'4Thu Feb 20 16:22:06 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 76) for client 24:77:03:d0:bd:b4 / user 'unknown'5Thu Feb 20 16:22:00 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 75) for client 24:77:03:26:86:7c / user 'unknown'6Thu Feb 20 16:21:59 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 74) for client 24:77:03:20:78:d0 / user 'unknown'7Thu Feb 20 16:21:59 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 73) for client 3c:a9:f4:42:11:a0 / user 'unknown'8Thu Feb 20 16:21:59 2014RADIUS server 10.4.120.251:1812 failed to respond to request  (ID 72) for client a0:82:1f:d8:24:02 / user 'unknown'

    DB:2.55:Wlc Log Radius Server Failed To Respond To Request 8c


    You should look at the ACS logs as that will give you a better idea of the failure.Sent from Cisco Technical Support iPhone App

  • RELEVANCY SCORE 2.55

    DB:2.55:Since Updating My Pad To Latest Version 6, I Have Lost Album Artwork cf


    SInce updating my iPad this morning to latest version 6, album artwork has disappeared from my music playlists !!any help or advice from similar victims would be welcome... Thanks...

    DB:2.55:Since Updating My Pad To Latest Version 6, I Have Lost Album Artwork cf

    SInce updating my iPad this morning to latest version 6, album artwork has disappeared from my music playlists !!any help or advice from similar victims would be welcome... Thanks...

  • RELEVANCY SCORE 2.55

    DB:2.55:Error Message When Burning .Img File xx


    I got this message when trying to burn a .img file: "Unable to burn "disk 4" - the device failed to respond properly . unable to recover or re-try.

    this happened twice in a row, I suppose that means it wasnt a defective DVD (using verbatim)

    I am running Tiger 10.4.7 with a Dual 1.8 Gz Processor.

    DB:2.55:Error Message When Burning .Img File xx

    I got this message when trying to burn a .img file: "Unable to burn "disk 4" - the device failed to respond properly . unable to recover or re-try.

    this happened twice in a row, I suppose that means it wasnt a defective DVD (using verbatim)

    I am running Tiger 10.4.7 with a Dual 1.8 Gz Processor.

  • RELEVANCY SCORE 2.55

    DB:2.55:Bluetooth 4 Le Device Cannot Be Removed From Windows 8 dm


    I am developing a Bluetooth low energy HID device based on BlueGiga's BLE113. I can connect to the device fine, but when I try to remove it it always fails. In event log there is this error:
    The device 'Bluegiga Mouse Demo' with container ID {da1cb178-e72f-5852-a48b-ad9549bc639d}, failed to respond to a device remove request
    Is this because the device is failing to respond to something? I'm not aware of any un-bond request. What should be happening here?

    DB:2.55:Bluetooth 4 Le Device Cannot Be Removed From Windows 8 dm

    I managed to screw up the registry trying to remove it then ended up reinstalling windows, I use a virtual machine and only use windows for this pretty much so it wasn't a big deal.
    I haven't had the joy of trying to program for Bluetooth on Windows yet, it doesn't look fun, I've been focussed on iOS and Mac. I don't know of any resources other than https://github.com/jrowberg/bglib, sorry

  • RELEVANCY SCORE 2.55

    DB:2.55:Can't Burn af


    Lately when I go to burn a CD I get the following message: "The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry."

    I try another CD and it sometimes works. I'm guessing it's working about 1 out of 3 tries, maybe 50/50. Is this simply my burner going bad?

    DB:2.55:Can't Burn af

    Hope they fix it
    have a good xmas all

  • RELEVANCY SCORE 2.55

    DB:2.55:Vmware 3 Issue dd



    Hi,

    Ive just installed a shiny new ESX 3 into production (no guests yet).

    I keep getting this error everytime i try to power on VMs this includes via the Web Console;

    Cannot connect to the virtual machine.

    Cannot connect to host 172.16.1.103: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond[/i]

    Its one thing after the next with the new versions at the moment!

    DB:2.55:Vmware 3 Issue dd


    If you mean you can't get to the console:

    Have you opened incoming TCP port 903 on any firewall in between the VIC / Web Browser and the ESX host?

    Is there any NAT between the VIC / Web Browser and the ESX host?

  • RELEVANCY SCORE 2.55

    DB:2.55:Cant Connect To A Remote Sql Server Using Php 3m


    I'm trying to connect to a remote sql server from an azure test site using this connection string.
    try{
    $db = new PDO('sqlsrv:server=[ip],1433; database=[dbname]', $username, $password);
    $db-setAttribute(PDO::ATTR_ERRMODE, PDO::ERRMODE_EXCEPTION); }
    catch(PDOException $e){
    echo $e-getMessage();}

    The error message I get is this:
    SQLSTATE[08001]: [Microsoft][SQL Server Native Client 11.0]TCP Provider: A connection attempt failed because the connected party did not properly respond after a period of
    time, or established connection failed because connected host has failed to respond.
    Any ideas/leads about what I may be doing incorrectly? ANy help would be appreciated.
    Sandeep.

    DB:2.55:Cant Connect To A Remote Sql Server Using Php 3m

    Hello,
    Do you know that it is existing a SQL Server driver for PHP written by Microsoft ?
    The classical value of the ConnectionTimeoutproperty of a connection to SQL Server is 30 seconds. You should try 60 up to 120 seconds as value for ConnectionTimeout ( more is useless : there is another problem )
    Maybe the azure test site is overloaded , or you have network problems.
    Have you tried to ping the SQL Server azure site ?
    Have a nice dayMark Post as helpful if it provides any help.Otherwise,leave it as it is.

  • RELEVANCY SCORE 2.54

    DB:2.54:"Failed To Respond" xa


    I am trying very hard to get my mac and my friends pc to talk. I am using an aim account and every time i try to chat with my friend i get the "failed to respond" error, how do i fix this? THX

    TheMacGuy12

    DB:2.54:"Failed To Respond" xa

    Hi peaceiwa,

    Welcome to the Apple Discussions

    If they have XP, AIM 5.9, have done the "Tuning" and enabled the AIM app through the XP firewall it may pay to check those things again.

    This site may help as well.

    12:22 PM Monday; June 19, 2006

  • RELEVANCY SCORE 2.54

    DB:2.54:Ichat Times Out Due To "Failure To Respond" 3a


    When I try to connect to Ichat, I get a message that says that I have failed to respond...I was able to use Skype, but prefer IChat. Why is this happening? Has anyone else had this?

  • RELEVANCY SCORE 2.54

    DB:2.54:Fixed Asset Add On Issue. 93



    Dear All

    When I try to run Depreciation Run it fails and gives following error message:

    The depreciation run 100000053 failed and has been cancelled;

    Error: 23309 (Accumulated depreciation account for ordinary depreciation is missing (Account determination 0))

    Please help to resolve this problem.

    Your quick Respond to this matter is highly appreciated.

    Regards

    Faizan

    DB:2.54:Fixed Asset Add On Issue. 93


    Dear Jose,

    Thanks for your respond..I already check this..This is ok.

    Faizan

  • RELEVANCY SCORE 2.54

    DB:2.54:Consume Wcf Service Host From Client Thru Wan. as


    i try to host a wcf service thru console by giving the external ip in uriforclient consume it as endpoint, but i had this error : Could not connect to http://115.133.x.x:8000/GetMsg/GetMsgC. TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 115.133.x.x:8000.Hoststatic void Main(string[] args) { using (host = new ServiceHost(typeof(GetMsgC), new Uri(http://115.133.x.x:8000/GetMsg))) {host.AddServiceEndpoint(typeof(IGetMsg), new BasicHttpBinding(), GetMsgC); host.Open();
    Console.WriteLine(Press Enter to terminate the host); Console.ReadKey(); }Clientstatic void Main(string[] args) { EndpointAddress ep = new EndpointAddress(http://115.133.x.x:8000/GetMsg/GetMsgC);IGetMsg proxy = ChannelFactoryIGetMsg.CreateChannel(new BasicHttpBinding(), ep);
    proxy.GetStart();
    Console.WriteLine(Get a clue : + proxy.GetMsg() ); Thread.Sleep(3000);
    try { proxy.CloseHost(); } catch (Exception ex) { Console.WriteLine(ex.Message.ToString()); } finally { Environment.Exit(-1); } }

    DB:2.54:Consume Wcf Service Host From Client Thru Wan. as

    Hi,From my point of view, it might be do with your server windows firewall didn't allow this port to be visited by the remote machine, I think you need to explicitly open the port in your windows firewall.ThanksBinzePlease remember to mark the replies as answers if they help and unmark them if they provide no help.
    Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.

  • RELEVANCY SCORE 2.53

    DB:2.53:Need To Access Windows Azure Web Service References In The Automation Solution ka


    Hi,
    I am trying to add webservice references of an silverlight application which was hosted in the windows azure environment for my automation solution using VSTS 2010.
    I am getting the below an error when i am trying to add the WCF web service urls to my automation solution by add service reference option.
    There was an error downloading 'URL '.
    Unable to connect to the remote server
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond IP
    Metadata contains a reference that cannot be resolved: ' URL'.
    There was no endpoint listening at URLthat could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
    Unable to connect to the remote server
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond IP
    If the service is defined in the current solution, try building the solution and adding the service reference again.
    I can able to browse that service URL in the IE successfully,
    but i could not able to add it in the VS automation solution.
    Any help on this is appreciated.
    Thanks in advance
    Regards,
    G.Chaitanya

    DB:2.53:Need To Access Windows Azure Web Service References In The Automation Solution ka

    Hi,
    Do you add useRequestHeadersForMetadataAddress in web.config file, configuration will be like this:
    useRequestHeadersForMetadataAddress
    defaultPorts
    add scheme=http port=integer /
    /defaultPorts
    /useRequestHeadersForMetadataAddress
    More information:
    http://msdn.microsoft.com/en-us/library/ee816894.aspx
    Hope this helps.Please mark the replies as answers if they help or unmark if not. If you have any feedback about my replies, please contact
    msdnmg@microsoft.com
    Microsoft One Code Framework

  • RELEVANCY SCORE 2.52

    DB:2.52:Sds Reporting - Deploying Of Report Problem f1


    Hello,I have a problem when I try to deploy a report against SDS. In VS2008 everything works fine. Before deploy I have set configuration file. In report manager I see report and SDS shared connection. However, when I try to preview report I got this message :An
    error occurred during client rendering.
    An
    error has occurred during report processing.
    Query
    execution failed for dataset 'DataSet1'.
    Could
    not connect to https://data.database.windows.net/soap/v1. TCP error code 10060:
    A connection attempt failed because the connected party did not properly respond
    after a period of time, or established connection failed because connected host
    has failed to respond 65.55.23.104:443.
    Unable
    to connect to the remote server
    A
    connection attempt failed because the connected party did not properly respond
    after a period of time, or established connection failed because connected host
    has failed to respond 65.55.23.104:443

    Has anybody experienced the same problem?Thanks

    DB:2.52:Sds Reporting - Deploying Of Report Problem f1

    I have found a solution.It was IE enhanced security enabled.

  • RELEVANCY SCORE 2.52

    DB:2.52:5-8 Player Mode p3



    5-8 player mode currently removes Pass the Bomb and Pie Fight segments.

    This should be optional.

    Since there are more players the game could protect victims from being pied or bombed again andallowothers to be vulnerable.

    DB:2.52:5-8 Player Mode p3

    Yeah that's a shame, thanks for the info!



  • RELEVANCY SCORE 2.52

    DB:2.52:Font Related Crashes pz


    I am using fireworks 8 on a Mac g5 (lots of memory) together
    with Linotype font explorer. I have many opentype fonts. When I try
    to use them in fireworks, It causes fireworks and many other
    programs to crash. Other crash victims include thunderbird,
    firefox, camino, finder, etc.

    If I was sure that upgrading to CS3 would fix this, I would
    upgrade....

    DB:2.52:Font Related Crashes pz

    I am using fireworks 8 on a Mac g5 (lots of memory) together
    with Linotype font explorer. I have many opentype fonts. When I try
    to use them in fireworks, It causes fireworks and many other
    programs to crash. Other crash victims include thunderbird,
    firefox, camino, finder, etc.

    If I was sure that upgrading to CS3 would fix this, I would
    upgrade....

  • RELEVANCY SCORE 2.51

    DB:2.51:Phony Browser Updates Redirect Victims To Malware Sites, Scareware pj



    Victims landing on websites hosting a malicious ad are presented with a popup informing them their browser is out of date. Theyre also given a link to a supposed update.

    Dont fall for it. Be sure to update your browser from within your browswer.

    http://threatpost.com/en_us/blogs/phony-browser-updates-redirect-victims-malware-sites-scareware-112812

    DB:2.51:Phony Browser Updates Redirect Victims To Malware Sites, Scareware pj


    Victims landing on websites hosting a malicious ad are presented with a popup informing them their browser is out of date. Theyre also given a link to a supposed update.

    Dont fall for it. Be sure to update your browser from within your browswer.

    http://threatpost.com/en_us/blogs/phony-browser-updates-redirect-victims-malware-sites-scareware-112812

  • RELEVANCY SCORE 2.51

    DB:2.51:Azure Sql Database Timing Out 18


    For about 20-30 minutes this morning I was getting timeout errors from Azure SQL Database. It seems to be resolved now, but does anyone know how to contact Microsoft if the issue happens again to try to get a resolution?
    Here was the error I was getting:
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond

    DB:2.51:Azure Sql Database Timing Out 18

    Hi Kalon,
    As pre my understand, Microsoft Windows Azure doesn't support a channel like Greenway which we can feedback about a platform issue currently.
    Personally,I recommend you that submit a feedback at theWindows Azure Feedback Forums.
    Regards,
    Fanny Liu

    If you have any feedback on our support, please clickhere.

    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • RELEVANCY SCORE 2.51

    DB:2.51:Video Chat "You Failed To Respond" dk


    Hi,

    When my best friend invited me to chat on web cam, it said I failed to respond even though I clicked the accept. When I invited him on webcam, it worked. Can you help me with this??

    DB:2.51:Video Chat "You Failed To Respond" dk

    Hi iBeck,

    But you have already posted it in this thread http://discussions.apple.com/thread.jspa?messageID=2880318#2880318

    11:01 PM Wednesday; August 9, 2006

  • RELEVANCY SCORE 2.51

    DB:2.51:Ebook Doesn't Show Up When Searched 7a



    I've tried searching my ebook, Victims of Fayte, and it doesn't show up. I can only find find it if I search specifically by author name or title. If I try to look it up by description, it doesn't appear. Is there a way to fix this?

    DB:2.51:Ebook Doesn't Show Up When Searched 7a


    Also - where are you searching for your book by its description?

    If on Google, it takes a little time for the Google Bots to crawl through the Lulu bookstore looking for new books and updates. Be patient, they will find your book and update their search results.

  • RELEVANCY SCORE 2.50

    DB:2.50:Artwork Victims 'Fell To Deaths' j8


    I dont know if you heard about the disaster but it was a great shame, heres the story.

    Dreamspace disaster.

    DB:2.50:Artwork Victims 'Fell To Deaths' j8

    its actually on the front page of the daily mail, obvously they couldnt think of any damaging rumours about labour for a change.

  • RELEVANCY SCORE 2.50

    DB:2.50:Host Failed To Respond Error (157.55.44.171) s9


    We are using HealthVault in the UK with the usual addresses e.g.
    https://account.healthvault.co.uk
    https://platform.healthvault.co.uk/platform
    but seeing a number of exceptions coming through saying that
    157.55.44.171 failed to respond. This IP appears to be in the US.

    Is the SDK redirecting internally somewhere and why is it ending up at this IP address?
    Is it correct and if it is why does it not respond?

    DB:2.50:Host Failed To Respond Error (157.55.44.171) s9

    We are using HealthVault in the UK with the usual addresses e.g.
    https://account.healthvault.co.uk
    https://platform.healthvault.co.uk/platform
    but seeing a number of exceptions coming through saying that
    157.55.44.171 failed to respond. This IP appears to be in the US.

    Is the SDK redirecting internally somewhere and why is it ending up at this IP address?
    Is it correct and if it is why does it not respond?

  • RELEVANCY SCORE 2.50

    DB:2.50:Cds Wont Burn! dc


    I am having problems burning CDs. After this new update now i get and error message saying "the attempt to burn disc failed. The device failed to respond properly, unable to recover or re-try". I have had my mac for almost 4 years and have never had problems burning CDs until the new iTunes and new Mac update. Please help!

    DB:2.50:Cds Wont Burn! dc

    I am having problems burning CDs. After this new update now i get and error message saying "the attempt to burn disc failed. The device failed to respond properly, unable to recover or re-try". I have had my mac for almost 4 years and have never had problems burning CDs until the new iTunes and new Mac update. Please help!

  • RELEVANCY SCORE 2.50

    DB:2.50:Verizon, When Will You Listen To Us And Remove Your Perma Cookie? xd



    We've been asking this same question for weeks now. ATT scrapped their plan based on user privacy, but you have not. We were not notified of this material change to our terms of service and contracts and allowed to terminate our services without penalty. You are in breach of ECPA as well as our contracts. You're even in breach of your own privacy policies. When will you change this?

    And don't respond with your canned "we care about privacy" link that opts you out ONLY of the targeted advertising and not from the neon sign announcing to all and sundry who is on their website when. Don't tell us that they're anonymous when websites can easily match the ID to username and password. Don't tell us that it will not harm abuse victims, victims of stalking, political dissidents, or anyone else who values their privacy.

    Let's hear from your counsel concerning the legal points made by myself and others. You should have told us this before the iPhone 6 came out and many of us upgraded to your CDMA service when instead we could have cut our losses and upgraded to a GSM phone and left you for a company that cares about privacy.

    Anyone who feels the same, please sign this petition:

    https://www.change.org/p/verizon-wireless-stop-destroying-privacy-by-tracking-users?utm_medium=emailutm_source=notifica

    DB:2.50:Verizon, When Will You Listen To Us And Remove Your Perma Cookie? xd


    We've been asking this same question for weeks now. ATT scrapped their plan based on user privacy, but you have not. We were not notified of this material change to our terms of service and contracts and allowed to terminate our services without penalty. You are in breach of ECPA as well as our contracts. You're even in breach of your own privacy policies. When will you change this?

    And don't respond with your canned "we care about privacy" link that opts you out ONLY of the targeted advertising and not from the neon sign announcing to all and sundry who is on their website when. Don't tell us that they're anonymous when websites can easily match the ID to username and password. Don't tell us that it will not harm abuse victims, victims of stalking, political dissidents, or anyone else who values their privacy.

    Let's hear from your counsel concerning the legal points made by myself and others. You should have told us this before the iPhone 6 came out and many of us upgraded to your CDMA service when instead we could have cut our losses and upgraded to a GSM phone and left you for a company that cares about privacy.

    Anyone who feels the same, please sign this petition:

    https://www.change.org/p/verizon-wireless-stop-destroying-privacy-by-tracking-users?utm_medium=emailutm_source=notifica

  • RELEVANCY SCORE 2.50

    DB:2.50:Opm 1.1 Bullies And Victims @ Cluster Network 1f



    Hi All,

    Have a performance situation we're trying to diagnose and OPM reports that there are 40 victims and 5 bullies on the cluster network. How do I identify who the bully workloads are? There isn't a way to sort one from the other.

    Thanks,

    -Will

    DB:2.50:Opm 1.1 Bullies And Victims @ Cluster Network 1f


    Hi Will,

    From the Incident page, you can sort either by victim or bully to find out which volumes are victims/bullies.

    The default is Victim, then you can pull down the menu to change the sort option. Hope this helps.

    Regards,

    kiran.


  • RELEVANCY SCORE 2.50

    DB:2.50:I Have Just Updated My I.O.S, Now My Screen Won't Respond? I Have My Screen On, But Won't Respond If I Try And Swipe To Unlock. Has Anyone Else Had This Issue? Thanks pm


    I have just updated my I.O.S, now my screen won't respond? I have my screen on, but won't respond if I try and swipe to unlock. Has anyone else had this issue? Thanks

  • RELEVANCY SCORE 2.50

    DB:2.50:What To Do Next zd


    I have been informed by microsoft that I am a victim of someone copying my windows ultimate 7 details and so microsoft have shut my account down. even though I have reported this and I have the legal discs with me I still don't no how to rectify this problem.
    is microsoft;s attitude:- thanks for telling us now go away or do they even try to help its victims.
    Mark

    DB:2.50:What To Do Next zd

    Hi Mark,

    The non-genuine issue can be caused by many factors such as corrupted license. If you ensure your copy of Windows 7 is genuine, please find the product key on the
    original disk and refer to the following steps to re-activate Windows 7.

    1. Please open CMD with Administrator privileges and type the following command one by one

    net stop sppsvc

    cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareProtectionPlatform
    ren tokens.dat tokens.bar
    cd %windir%\system32
    net start sppsvc
    cscript slmgr.vbs -rilc

    Note:(It may take a long time for this to complete, please be patient)

    2. Please reboot twice and you may be required to reactivate the system.

    Also you can use the following steps to activate the system by phone.

    a. Click Start , type slui 4 in the search bar and press Enter.
    b. You will receive a dialogue box and a number to call once you have selected your country.
    c. After that, please restart the computer and test the issue again.

    Hope
    it helps.

    Regards,
    NikiPlease remember to click Mark as Answer on the post that helps you, and to click Unmark as Answer if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • RELEVANCY SCORE 2.49

    DB:2.49:Ids4 Rdep Parser - Perl Xml Parser dk



    Hi,

    We are using Perl XML Parser to parse the xml files generated by IDS4. My problem is with the IP address of the victim that sometimes/randomly (usually once in several log file of which size is 1.5MB) cannot be parsed correctly. In my observation, it happens to only 1 victim of an event alerts that has multiple victims (15 victims).

    If I cut and paste that particular event alert into a new log and parse it, everything will work fine. I can also confirm the wellformness of that xml log file using the XML Spy. So, it's a valid xml file. I try this on both Perl5.6 and 5.005_03.

    Does anyone seeing the same problem as mine?

    Thanks,

    Rusma

    DB:2.49:Ids4 Rdep Parser - Perl Xml Parser dk


    I think this issue is releated to the Perl application. If you give TAC a call with the "xml file" they should be able to rule out if it's an issue on their end. Good Luck!

  • RELEVANCY SCORE 2.49

    DB:2.49:Keyboard Doesn't Respond d8


    When I try to respond to an email, the keyboard does not respond to input. Cursor just flashes in place.

    DB:2.49:Keyboard Doesn't Respond d8

    When I try to respond to an email, the keyboard does not respond to input. Cursor just flashes in place.

  • RELEVANCY SCORE 2.49

    DB:2.49:Problem With Dell Inspiron 1564 After Try To Do Bios Update m3



    HI,

    During updating BIOS with thisi have error BIOS update failed! Image verification failed. Error code -200 and laptop was frozen, keyboard and touchpad doesnt respond. After 30 min i remove AC and battery from my laptop and try to power on again, but dell not respond.

    Any sugestions what can I do now? (Sorry for bad Engllish)

    DB:2.49:Problem With Dell Inspiron 1564 After Try To Do Bios Update m3


    Kamil: I think you are going to need a Bootable media in order to fix this issue. I have seen some utility disks (CDs) that are Bootable and actually shows Windows 98 or something similar when they start-up, with the End User being left at a good, old fashioned MS-DOS Command prompt after boot-up is completed.

    (For the life of me, I cannot recall which disk does this, so you will need to do a little research or keep asking the Dell folks...)

    Then the installation instructions for your model Inspiron 1564 are shown on this page:

    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=R301036fileId=2731118546osCode=W764productCode=inspiron-1564languageCode=ENcategoryId=BI#3DOS

  • RELEVANCY SCORE 2.49

    DB:2.49:Ichat User Failed To Respond ca


    hi, i've been trying to video chat with people using ichat for somet ime now, every time i try to do it though, it just says "user failed to respond". i am using an AIM screen name, and so is the person i am trying to chat with. both of us are using mac book pros

    DB:2.49:Ichat User Failed To Respond ca

    Hi,

    So you are wireless and have to Log on to this network.
    Neither of these facts is significant to iChat not working per se.

    Then I suggest you ask the college if they allow Video chatting and if they have the iChat ports open.



    6:52 PM Tuesday; October 2, 2007

  • RELEVANCY SCORE 2.49

    DB:2.49:News kx



    That was a horrible thing that happen in Boston. I want to send my condolence for the victims of this horrendous act!

    DB:2.49:News kx


    exactly......what would make a 19 yr old popular boy do something like this? I don't understand

  • RELEVANCY SCORE 2.49

    DB:2.49:Cannot Launch Console On Any Guest On Specific Host p3



    In our certification environment we have several stand alone hosts, but are rebuilding to match our production environment (6-node cluster).

    We create the cluster resource and added a host to it. From there, we migrated several VM's to it, but unfortunately we can not access the console on any guest residing on that one host.

    We've researched the issue and haven't found anything that has worked yet. Anyone seen this before and/or have any ideas? We're running VC 2.0.1, ESX 3.0.2.

    The exact message is "Error connecting: Cannot connect to host ipaddress: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond"

    I posted this in our community forum, but it was suggested I try here. See below for the original thread and previous suggestions:

    http://communities.vmware.com/message/905123

    DB:2.49:Cannot Launch Console On Any Guest On Specific Host p3


    I did not, but one of my colleagues may have. I'll ask when I see him, as we were both troubleshooting the issue.

  • RELEVANCY SCORE 2.49

    DB:2.49:Ichat Connection Problem ka


    I live in Holland, after the 10.4.4 update I can no longer I chat with USA when I start the chat the dial spins then says that I "failed to respond" when I try to chat with my other home computer it works.
    when the usa trys to contact me it tells them the same thing that they "failed to respond...any help?

    DB:2.49:Ichat Connection Problem ka

    There is no guarantee that this will help, but have you tried disabling the "encryption" option in Security in iChat?

    I have noticed some trouble chatting with overseas friends and every time I've had an issue disabling theis option makes things work.

  • RELEVANCY SCORE 2.49

    DB:2.49:Can Microsoft Please Give Windows 8 Victims A Free Upgrade Back To Windows 7 8 Has To Be The Worst Operating System Ever - Worse Than Me xp


    Can microsoft please give windows 8 victims a free upgrade back to windows 7? 8 has to be the worst operating system ever - worse than ME!

    DB:2.49:Can Microsoft Please Give Windows 8 Victims A Free Upgrade Back To Windows 7 8 Has To Be The Worst Operating System Ever - Worse Than Me xp

    Delete all Metro apps,
    disable UAC completely
    Pin your own shortcuts to Metro (or you can create pretty shortcut tiles with OblyTile)

  • RELEVANCY SCORE 2.49

    DB:2.49:Something Called Abuchak Has Taken Over Myfirefox Search Engine p9



    This mysterious site took over my Firefox browser yesterday. Numerous Firefox victims exist.

    I am unable to access my Firefox browser to even try to correct the problem.

    The abuchak website offers no information for its invasion.

    WE FIREFOX USERS NEED IMMEDIATE HELP

  • RELEVANCY SCORE 2.49

    DB:2.49:Please Help With Error Connecting ax



    I'm getting the error below in Virtual Infrastructure Client when I click on the console tab of a Virtual Machine Instance. This is happening on all Virtual Machines on this box.

    I have other VMware ESX servers of the same version and build that don't have this problem.

    VMware ESX Server, 3.0.1,32039

    Virtual Infrastructure Client, 2.0.1 Build 32042

    Error:

    Error connecting: cannot connect to host "NAME": A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

    Do you want to try again? (YES or NO)

    Any ideas?

    DB:2.49:Please Help With Error Connecting ax


    You can esaily find if this is a DNS problem.

    Try using IP address.

    If you succeed it's a DNS problem put in your /etc/hosts file or publish in DNS.

    If you don't succeed may be a firewall problem.

    Remember that you should open ports 902 and 903 towards VC

  • RELEVANCY SCORE 2.49

    DB:2.49:A Dispute On Family And Friend Transfer? Help Needed. 39



    HiGuys and Paypal staffs,

    I recently tried to purchase something from somebody in a facebook group. He asked me to use friend and family transfer and I did so.

    However, few days after I found out that the seller was actually scamming people by selling the same item to many people, and he wasn't going to send the items to us.

    I contacted some other victims and I was told that some victims report it to paypal. I was told by other victims that I need to call Paypal and file a dispute on my payment.

    A group of victims from America (who also used family and friend transfer) have already done so successfully.

    However, when I call the UK paypal, they told me that they cannot file a dispute on my payment since it is a personal transfer.

    So would you please provide some help because if you investigate into that account, there will be many disputes on it.

    I really need some help on this because I do not want my money to go to a scammer. And also, some other victims have already been helped.

    Much appreciate for any help.

    DB:2.49:A Dispute On Family And Friend Transfer? Help Needed. 39


    Hi Kernowlass,

    Really appreciate your reply.

    Actually I have been to my bank today and talked to them about this issue. They told me that once the money is trasferred from my bank account to paypal, then it has nothing to do with the bank.

    I'm now just wondering how could those dudes from America successfully put disputes on their ff transder. Are there difference in policy?

  • RELEVANCY SCORE 2.49

    DB:2.49:Does Paypal Respond To These Forum Problems??? f7



    Is this forum for paypal customer to customer - or does PayPal actually try to helpout here?

    DB:2.49:Does Paypal Respond To These Forum Problems??? f7


    Is this forum for paypal customer to customer - or does PayPal actually try to helpout here?

  • RELEVANCY SCORE 2.49

    DB:2.49:Virtual Pc Doesn't Respond aa


    hey whenever i try to install this is just doesn't respond. im using an imac g5 with 1 gig ram.

    DB:2.49:Virtual Pc Doesn't Respond aa

    Michael,
    many users have no problems installingusing VPC. Your install disk might be broken - get a new one from the vendor or use a different one (your license-key should work with any installer of the same type).

    Good luck.

    MACiek

  • RELEVANCY SCORE 2.49

    DB:2.49:How To Add The Cloud Deployed Webservice References To The Automation Solution 19


    Hi,
    I am getting the below an error when i am trying to add the cloud WCF web service urls to my automation solution.

    There was an error downloading 'URL '.
    Unable to connect to the remote server
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond IP

    Metadata contains a reference that cannot be resolved: ' URL'.
    There was no endpoint listening atURLthat could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more
    details.
    Unable to connect to the remote server
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond IP
    If the service is defined in the current solution, try building the solution and adding the service reference again.
    I can able to browse that service URL in the IE successfully,
    but i could not able to add it in the VS automation solution.
    Any help on this is appreciated.
    Thanks in advance
    Regards,
    G.Chaitanya

    DB:2.49:How To Add The Cloud Deployed Webservice References To The Automation Solution 19

    If you are not able to do an HTTPGET on metadata url even after turning firewall off then there is some problem with your network and proxy ,
    Please ask someone from network team to check if you request is actually reaching to remote host , I doubt that may be organisational firewall is causing this problem

  • RELEVANCY SCORE 2.49

    DB:2.49:This Is Just A App What I Made, Comments Are Welcome. 1k


    http://www.windowsphone.com/s?appid=0554c593-b4c2-4409-9bc6-36bd31b555df
    App is purposed to help victims determine are they possible injured internally in a accident using their phones.
    Regards!
    Matti

    DB:2.49:This Is Just A App What I Made, Comments Are Welcome. 1k

    I like the idea. I haven't downloaded it yet but I read the description. Keep it up :)

  • RELEVANCY SCORE 2.49

    DB:2.49:Ichat "Failed To Respond" Problem df


    Ok so I just got my internet hooked up at school, it's comcast, with a Linksys Wireless-G Broadband Router

    Whenever I try and video chat with my family in Miami, it always says "Ichat Couldn't Work because Zach Grossman Failed to Respond" (zach grossman is me btw)

    I have great connection, so does my family, but this isn't working and I really want to talk to them over ichat

    Any Ideas? I really appreciate any help. Thanks a lot.

    DB:2.49:Ichat "Failed To Respond" Problem df

    Hi,

    Depending on what is in the Error 8 log will point to what needs changing.

    Starting with the Mac Firewall if ON the ports iChat uses need to be entered as there is no preset.
    http://www.ralphjohnsuk.dsl.pipex.com/page4.html#_mactodo

    In System Preferences Quicktime Streaming
    It needs to be set to 1.5Mbps. (Automatic does not work properly and can sometimes be error 8)

    In your router and modem the ports need to be opened or allowed.

    If you do have separate devices they have to be configure properly.
    (Cobbled together networks work for Web browsing and mail but iChat needs the LAN networked correctly - even then it can be fussy)

    Your ISP may offer a VoIP service which means they may block ports.

    Vonage type adapters also have to be placed in the right palce on your LAN (Not in line)



    10:56 PM Wednesday; October 10, 2007

  • RELEVANCY SCORE 2.48

    DB:2.48:Cannot Browse Iis7 Default Website, All Other Sites Work Fine. xf



    It seems that for some reason, if I try to visit my domain (ajnoz.com) i get the error
    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
    However, if I go to remote.ajnoz.com everything loads fine (albeit a little slow, but that is because of my internet).
    This only seems to affect http://, https:// works fine. Even
    http://connect/ works over a vpn.
    If you could please help me figure this out as I do not want to re-install sbs 2008, I will be glad to give you any information that you need.

    DB:2.48:Cannot Browse Iis7 Default Website, All Other Sites Work Fine. xf

    Hi,
    Did you try install the .Net Framework 3.5 and sp1? And check the Ports of IIS Web Applications. Maybe they can conflict.
    Thanks

  • RELEVANCY SCORE 2.48

    DB:2.48:How To Use A Graphical Map cx


    I have to use a map in my software to calculate victims of a nuclear explosion in a certain city or country. Does anybody know a way of doing this practically???

    DB:2.48:How To Use A Graphical Map cx

    hi,
    in ur message u didn't specify what programming language u use , but anyway
     
    u should to 'add a component' as usual it exist in Project menu , then choose to add an ESRI object
    i wish it work with u
     

  • RELEVANCY SCORE 2.48

    DB:2.48:Fraud d8



    there is a UK website charging pounds 9.95 to renew your euuropean health card when it is free online with the NHS

    paypal should remove this contact to save other victims

    DB:2.48:Fraud d8


    Hi there dogsnog,

    We encourage you to report violations of this Acceptable Use Policy to PayPal immediately. If you with to report a website to us you can email PayPal’s AUP Compliance Department at: aupviolations@paypal.com.

    I hope this information helps youWayne

  • RELEVANCY SCORE 2.48

    DB:2.48:Certificate Of Authenication (Coa) Number Invalid For Vista Upgrade 8c


    Recently bought a new HP computer.  The HP upgrade website (ran by ModusLink) will not accept ('invalid') the 14 digit COA #.  This will happen if someone else has already submitted the COA # for an upgrade.
    I cannot confirm if someone has used my COA #.  ModusLInk does not respond to inquiries.
    All someone has to do is open a computer box at a warehouse or store, steal the COA# and serial number, and the purschaser is screwed, and neither Microsoft, the retail sore, nor the manufacturer meets its obligation to provide a free Vista upgrade to the legitimate purchaser.
    Microsoft needs to investigate COA serial # theft and implement a backup plan for victims.
    I suspect all hell is going to break loose after Christmas when other buyers find that they cannot obtain a free upgrade because their COA # is 'invalid'.

    DB:2.48:Certificate Of Authenication (Coa) Number Invalid For Vista Upgrade 8c

    Folks:

    Apologies for the delay. Please remember this forum is specifically for WGA/OGA/VistaGA specific issues. This does NOT include OEM sponsored "Upgrades" for purchasing new PC's. While we understand your frustration - this post is offtopic and violates terms of use for this public forum.
    In addition, I must lock this post for the following reasons:
    - This post has been reported to be "Offtopic" several times.
    - This post has had users post threats. Threats of any type will not be tolerated.
    - This post if an inappropriate tone and language for overall usage. Remember this is a public forum and users of all ages and backgrounds read this. Please be sensitive to others.
    That being said, the best method for immediate support for this issue is to contact your purchasing OEM about the Vista Express Upgrade. You MUST go back to your PC OEM to recieve their specialized upgrade support. Examples include (but are not limited to):

    Acer - http://global.acer.com/support/winvista/index.htm
    Microstar International - http://www.msi.com.tw/VistaUpgrade/
    LG Electronics - http://www.lge.com/products/computer/notebook/WindowsVista.jsp
    Asus - http://event.asus.com/vistaupgrade/
    Gateway - http://www.gateway.com/vista/index.asp?page=express
    EMachines - http://www.emachines.com/vista/express.html
    Fujitsu/Siemens - http://www.fujitsu-siemens.com/campaigns/vista/windows_vista_upgrade.html
    HP - http://h20219.www2.hp.com/services/cache/416458-0-0-225-121.html

    Thanks,
    -phil

  • RELEVANCY SCORE 2.48

    DB:2.48:When I Try To Respond To A Craigslist Ad By Email, The Message Isnt Sent. What Do I Do pp



    When I try to respond to a Craigslist ad, here's what I get:

    The connection to the server has failed. Account: pop3.live.com,' Server: 'smtp.live.com,' Protocol: SMTP, Port 25, Secure(SSL): Yes, Socket Error: 10051, Error Number Ox8OOCCCOE

    DB:2.48:When I Try To Respond To A Craigslist Ad By Email, The Message Isnt Sent. What Do I Do pp



    joesimmons...,

    Firefox doesn't use POP3 or SMTP protocols. Those protocols are used by email applications, not by web browsers.

    If you are using Outlook Express for email, is that set as the mailto application in Tools Options Applications?

    http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

  • RELEVANCY SCORE 2.48

    DB:2.48:Cannot Connect To Vm Console Using Vc 2.0 f8



    Hello, I'm having a problem connecting to the console for any of my VMs on one of my ESX 3.0 servers. I have three ESX servers and the other two are not having this issue.

    Whether I connect to the server itself or the VC server using the VIC, I get the following message when I try to open a console to any VM on this particular server:

    "Error connecting: Cannot connect to host x.x.x.x: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond Do you want to try again?"

    I can connect to these VMs using remote desktop with no problem so the issue is with this particular ESX server. I just don't know what that problem could be. Any ideas?

    Thanks.

    DB:2.48:Cannot Connect To Vm Console Using Vc 2.0 f8


    Agreed, restart mgmt-vmware service.

    Verify the gateway of the esx servers service console connection.

    Verify that 902 is open, this should be default.

    See if you can ping/tracert the ESX host and your workstation from the ESX host.

  • RELEVANCY SCORE 2.48

    DB:2.48:Summon For Xperia V Sod Victims jx



    Hi Guys out there who suffers from the SOD problem.

    Given Sony is obviously not taking any effective measure and not giving any useful feedback, there is no point for us to continue to discuss this issue within ourselves.

    I have created a facebook page here

    http://www.facebook.com/SonyXperiaVVictims

    Please go there join, and like it and we take it to our own hands to tell the world about such utter nonsense and absurdity from Sony.

    DB:2.48:Summon For Xperia V Sod Victims jx


    As there's already a thread regarding this issue it would be best to keep the discussion there: http://talk.sonymobile.com/thread/60422?tstart=0.





    - Official Sony Xperia Support Staff

    If you're new to our forums make sure that you have read our Discussion guidelines.If you want to get in touch with the local support team for your country please visit our contact page.

  • RELEVANCY SCORE 2.48

    DB:2.48:Notice To Hijackthis Posters And Responders xp



    =================================
    DO NOT POST A REPLY TO THISMESSAGE THREAD!!

    USE THEFOLLOWING LINK TO START YOURNEW MESSAGE:

    http://forums.us.dell.com/supportforums/board?board.id=si_virus

    Once you start your thread please stay with that one and not start another, it just adds to our workload.

    We will ask the Dell Moderators to delete ALL replies to this message. We would appreciate posters NOT REPLYING to this message. Start a new message topic on your own.
    ================================

    Notice to ALL Hijackthis LOG POSTERS and Responders:

    Since HijackThis is a very powerful tool that edits the brains of Windows (the Registry), DO NOT FIX anything in the Hijackthis log screen without assistance from the experts! Most of the line items in the scanned log are normal for Windows operation. Hijackthis should identify the vast majority of your problems and enable us to help you clean them off your system.

    The following trained and longtime DellForum experts feel that too many helpers in one thread, or help from inexperienced users may increase the chance of software accidents:

    Texruss, ChrisRLG, Baskar1234, Grinler, pskelley, and SpotCheckBilly.

    To new DellForum users who try to help others...please refrain from answering Hijackthis logs with specific cleaning advice...you may do more damage than good. It is good etiquette on any Internet newsgroup to "lurk" for a few weeks before posting.

    Victims should click on a responder's name to the left of the posting window and see how many times they have posted to verify their credentials. DellForum Members have less than 250 posts, DellForum Regulars have in excess of 250 posts. While quantity does not necessarily equal quality the track record of longtime posters does giveyou a measuring stick to see how their post threads evolved. Be an informed newsgroup user...read older posts from a responder before you accept their advice blindly.

    To potential new responders: If you feel you have special skills Private Message the trained responders below in my signature (look at the top of the Forum Window for this messaging feature) and we will consider you as a candidate for the anti-malware training classes. We are looking for people who write and research well, and have an extremely strong PC background. CWS infiltrators need not apply. ;-

    To the victims: please be patient. Your post may be answered immediately or may take several days. This is an extremely busy message board and only specially-trained volunteers can answer most of the questions. There is no ONE software program to fix the malware problems...if it existed I would have it and so would you. Malware cleanup and prevention takes a handful of tools (many free) and advice from a trained responder to clean your machine so you don't have to format the hard drive. We can save 90% of the victims without having to resort to a reformat.

    If you don't get a reply after 24 hours....then post a REPLY to your own message asking for someone to respond. This is called a "bump" and we don't mind you doing this...just don't do it for the first day and don't bump more than once a day afterward. We will see it, but we have fulltime jobs, we don't work for Dell, and are all volunteers so be patient.

    Provide as much info as possible about your problems instead of just plunking down a Hijackthis log.

    Posters in need of help should download the 1.98 version of Hijackthis. Get it at:

    http://russelltexas.com/malware/downloadHJTzipfile.htm

    My full Hijackthis FAQ is at:

    http://russelltexas.com/malware/faqhijackthis.htm

    Notes on the new homepage CWS hijacker exploits and other infections are at:

    http://russelltexas.com/malware/malware.htm

    Please read those pages and become an informed computer user. Your efforts are as equally important as the experts who respond.

    Some additional things you can do to help us since time is so precious:

    1. Please run and store an original Hijackthis scan of your system before you begin cleanup. We may ask for it later.

    2. Begin your cleanup yourself by running Adaware and Spybot Search Destroy AND THEN post your first Hijackthis log (actually it will be your second log assuming you saved an original first scan).

    3. Cleaning with those tools may eliminate 50% or more of your problems, possibly all. Please download and run them per the instructions on the followingwebpage: Print out that page and set up and run Adaware EXACTLY like the instructions state. Failure to do so will probably leave 50% of the parasites on your system.

    http://www.cjwd.demon.co.uk/spybot-adaware.html

    Thanks,

    Texruss
    www.russelltexas.com
    Spyware Fighter Wilders Forum
    Slyware Warrior Tom Coyote Forum
    Expert Malware Responder Dell Forum

    Please be aware only the following DellForum members were trained at
    TomCoyote.com and SpywareInfo.com to help with malware like viruses,
    worms, adware, scumware, foistware and crudware in general. The following are also the only experts specifically trained to analyze and advise on Hijackthis logs: Texruss, ChrisRLG, Baskar1234, Grinler, pskelley, and SpotCheckBilly. (If you are one of our classmates and not on this list email me for an addition to this list).

    Also...these longtime DellForum regulars have proven to me time and again their advice is excellent for malware questions in general, Windows operations, and many specific items in Hijackthis logs: jimw, ddeerrff, and msgale. Please follow their advice when they respond to your problems. They have a proven track record here.

    DB:2.48:Notice To Hijackthis Posters And Responders xp


    =================================
    DO NOT POST A REPLY TO THISMESSAGE THREAD!!

    USE THEFOLLOWING LINK TO START YOURNEW MESSAGE:

    http://forums.us.dell.com/supportforums/board?board.id=si_virus

    Once you start your thread please stay with that one and not start another, it just adds to our workload.

    We will ask the Dell Moderators to delete ALL replies to this message. We would appreciate posters NOT REPLYING to this message. Start a new message topic on your own.
    ================================

    Notice to ALL Hijackthis LOG POSTERS and Responders:

    Since HijackThis is a very powerful tool that edits the brains of Windows (the Registry), DO NOT FIX anything in the Hijackthis log screen without assistance from the experts! Most of the line items in the scanned log are normal for Windows operation. Hijackthis should identify the vast majority of your problems and enable us to help you clean them off your system.

    The following trained and longtime DellForum experts feel that too many helpers in one thread, or help from inexperienced users may increase the chance of software accidents:

    Texruss, ChrisRLG, Baskar1234, Grinler, pskelley, and SpotCheckBilly.

    To new DellForum users who try to help others...please refrain from answering Hijackthis logs with specific cleaning advice...you may do more damage than good. It is good etiquette on any Internet newsgroup to "lurk" for a few weeks before posting.

    Victims should click on a responder's name to the left of the posting window and see how many times they have posted to verify their credentials. DellForum Members have less than 250 posts, DellForum Regulars have in excess of 250 posts. While quantity does not necessarily equal quality the track record of longtime posters does giveyou a measuring stick to see how their post threads evolved. Be an informed newsgroup user...read older posts from a responder before you accept their advice blindly.

    To potential new responders: If you feel you have special skills Private Message the trained responders below in my signature (look at the top of the Forum Window for this messaging feature) and we will consider you as a candidate for the anti-malware training classes. We are looking for people who write and research well, and have an extremely strong PC background. CWS infiltrators need not apply. ;-

    To the victims: please be patient. Your post may be answered immediately or may take several days. This is an extremely busy message board and only specially-trained volunteers can answer most of the questions. There is no ONE software program to fix the malware problems...if it existed I would have it and so would you. Malware cleanup and prevention takes a handful of tools (many free) and advice from a trained responder to clean your machine so you don't have to format the hard drive. We can save 90% of the victims without having to resort to a reformat.

    If you don't get a reply after 24 hours....then post a REPLY to your own message asking for someone to respond. This is called a "bump" and we don't mind you doing this...just don't do it for the first day and don't bump more than once a day afterward. We will see it, but we have fulltime jobs, we don't work for Dell, and are all volunteers so be patient.

    Provide as much info as possible about your problems instead of just plunking down a Hijackthis log.

    Posters in need of help should download the 1.98 version of Hijackthis. Get it at:

    http://russelltexas.com/malware/downloadHJTzipfile.htm

    My full Hijackthis FAQ is at:

    http://russelltexas.com/malware/faqhijackthis.htm

    Notes on the new homepage CWS hijacker exploits and other infections are at:

    http://russelltexas.com/malware/malware.htm

    Please read those pages and become an informed computer user. Your efforts are as equally important as the experts who respond.

    Some additional things you can do to help us since time is so precious:

    1. Please run and store an original Hijackthis scan of your system before you begin cleanup. We may ask for it later.

    2. Begin your cleanup yourself by running Adaware and Spybot Search Destroy AND THEN post your first Hijackthis log (actually it will be your second log assuming you saved an original first scan).

    3. Cleaning with those tools may eliminate 50% or more of your problems, possibly all. Please download and run them per the instructions on the followingwebpage: Print out that page and set up and run Adaware EXACTLY like the instructions state. Failure to do so will probably leave 50% of the parasites on your system.

    http://www.cjwd.demon.co.uk/spybot-adaware.html

    Thanks,

    Texruss
    www.russelltexas.com
    Spyware Fighter Wilders Forum
    Slyware Warrior Tom Coyote Forum
    Expert Malware Responder Dell Forum

    Please be aware only the following DellForum members were trained at
    TomCoyote.com and SpywareInfo.com to help with malware like viruses,
    worms, adware, scumware, foistware and crudware in general. The following are also the only experts specifically trained to analyze and advise on Hijackthis logs: Texruss, ChrisRLG, Baskar1234, Grinler, pskelley, and SpotCheckBilly. (If you are one of our classmates and not on this list email me for an addition to this list).

    Also...these longtime DellForum regulars have proven to me time and again their advice is excellent for malware questions in general, Windows operations, and many specific items in Hijackthis logs: jimw, ddeerrff, and msgale. Please follow their advice when they respond to your problems. They have a proven track record here.

  • RELEVANCY SCORE 2.48

    DB:2.48:Scam (Not Computer Related) mf



    Okay, this identity-theft scam has nothing to do with computers... but I found the scam interesting... and felt it worthwhile to spread the word.

    Peoplepretending to bepolice offers catch unsuspecting phone victims,claiming alleged tickets generated bytraffic-light cameras:

    http://autos.yahoo.com/news/traffic-light-camera-scam-steals-your-identity.html

    DB:2.48:Scam (Not Computer Related) mf


    Okay, this identity-theft scam has nothing to do with computers... but I found the scam interesting... and felt it worthwhile to spread the word.

    Peoplepretending to bepolice offers catch unsuspecting phone victims,claiming alleged tickets generated bytraffic-light cameras:

    http://autos.yahoo.com/news/traffic-light-camera-scam-steals-your-identity.html

  • RELEVANCY SCORE 2.48

    DB:2.48:Error Code 10060 zf



    Hi!

    I have problem. During the download of the update files occurs error:

    Failed to download file Current\VSCANDAT1000\DAT\0000\avvdat-6865.zip from site update.nai.com:80, error code 10060 ( A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. )

    This problem started to be shown 2 weeks ago and occurs periodically.`

    DB:2.48:Error Code 10060 zf


    There are a lot of posts re this with little marked as solved. Been 4 years of this error. See if a corporate mod or user can enlighten you.

  • RELEVANCY SCORE 2.47

    DB:2.47:Cameras Do Not Following Upgrade To Ios 7.0.4 (Downgrade). It Works Once Then Freezes. pk


    Apple........thousands of users out there with this problem. I do not want a work around, I want your once respectable produced fixed. All viewers of this post and victims of Apple.........stop purchasing Apple products now.Apple.....will you at least acknowledge the bug?

    DB:2.47:Cameras Do Not Following Upgrade To Ios 7.0.4 (Downgrade). It Works Once Then Freezes. pk

    Apple........thousands of users out there with this problem. I do not want a work around, I want your once respectable produced fixed. All viewers of this post and victims of Apple.........stop purchasing Apple products now.Apple.....will you at least acknowledge the bug?

  • RELEVANCY SCORE 2.47

    DB:2.47:Cannot Respond To Ads mp


    When I try to respond to an ad (i.e. Craigslist) and click on the link I get
    "could not perform this operation because default mail client is not
    properly installed". This is only since I signed on with ATT Hispeed service.Thanks

    DB:2.47:Cannot Respond To Ads mp

    Assuming Windows 7...

    Win7 doesn't include a default Mail Client.[What were they thinking?] You will have to install one (e.g., MS Outlook;
    Windows Live Mail; Thunderbird)
    and then set it as your default for Mail in the CUSTOM section ofSet Program Access and Computer
    Defaults before any Send To or MailTo functions will become available.

    Tip: If you have a Yahoo account, you can install the current version of Yahoo Toolbar and then have an option to make Yahoo Mail (webpage) your default for Mail. See

    http://help.yahoo.com/l/us/yahoo/mail/yahoomail/settings/settings-10.html

    You'll find support for Win7 Mail Clients in this forum:
    http://social.answers.microsoft.com/Forums/en-US/w7network/threads

    You will find support for Windows Live Mail in this public newsgroup:

    http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.windows.live.mail.desktop
    Via your newsreader:
    news://msnews.microsoft.com/microsoft.public.windows.live.mail.desktop

    ~Robear Dyer (PA Bear) ~ MS MVP (IE, Mail, Security, Windows Update Services) since 2002 ~ Disclaimer: MS MVPs neither represent nor work for Microsoft

  • RELEVANCY SCORE 2.47

    DB:2.47:Error By Convert P2v 7x



    Hi all.

    I have a problem. Try convert and have this error:

    FAILED: A general system error occurred:

    A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond

    And this error we have at 97% (((

    DB:2.47:Error By Convert P2v 7x


    I resolve my problem)))

    I remove not use network card and i finished convertation!

    Thanck you.

  • RELEVANCY SCORE 2.47

    DB:2.47:System.Servicemodel.Endpointnotfoundexception: 7f


    I am getting the following error when I try to run a webtest on a webapplication
    System.ServiceModel.EndpointNotFoundException:
    Could not connect to http://10.10.23.890/weblogin.aspx TCP error code 10060: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. 
    It showed no error while recording but throws this error when i playback the same.
    please help
    Thanks,
    Sooraj
     

    DB:2.47:System.Servicemodel.Endpointnotfoundexception: 7f

    Do you have a proxy server set up in your browser but not in your webtest?

  • RELEVANCY SCORE 2.47

    DB:2.47:Fixed Asset Add On Issue. jx



    Dear All

    When I try to run Depreciation Run it fails and gives following error message:

    The depreciation run 100000053 failed and has been cancelled;

    Error: 23309 (Accumulated depreciation account for ordinary depreciation is missing (Account determination 0))

    I checked all accounts..They are ok.

    Please help to resolve this problem.

    Your quick Respond to this matter is highly appreciated.

    Regards

    Faizan

    DB:2.47:Fixed Asset Add On Issue. jx


    Hi,

    The issue seems to be issue specific to the database.

    You can may be contact the SAP Support, get the database investigated, by logging a SAP Support Ticket using Service Market Place.

    Kind Regards,

    Jitin

    SAP Business One Forum Team

  • RELEVANCY SCORE 2.47

    DB:2.47:Video Controller Failed To Initialize Or Respond sd


  • RELEVANCY SCORE 2.47

    DB:2.47:Connected Host Has Failed To Respond 7f



    I have 5 ESX hosts in my datacenter. I Powered on one of the guest OS's and when I went to the Console Tab recieved the following error:

    Error connecting: Cannot conect to host xx.xx.xx.xx: A connection attempt failed because the connected party did not proparly respond after a period of time, or established connection failed bacause connected host failed to respond.

    Do you want to try again?

    The guest OS was available via Remote but I was unable to access it via console. Also, while migrating an image to this host the job failed, timed out.

    What should I check for?

    Thanks - Sean

    DB:2.47:Connected Host Has Failed To Respond 7f


    I'd check that the entry in anaconda-ks.cfg and the IP of your service console are the same certainly.

  • RELEVANCY SCORE 2.47

    DB:2.47:C2-02 - Operation Failed aa



    Hie can u pliz help me i have a nokia c202 and each time i try 2 see my contacts my phone is saying "operation failed".then 2 my phone shuts down and restarts each time i receive or try to make a call.so pliz help me with this pliz

    Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.

    DB:2.47:C2-02 - Operation Failed aa


    Hi Kambitz2,

    Welcome to the Nokia Support Discussions!

    When did it start to happen? Have you tried to turn off the phone, remove the battery for a few seconds and switch it on? If the issue remains, you can try to restore its default settings without deleting any of your personal data. Menu Settings Rest. fact. sett. Settings only. The default code is 12345, unless otherwise changed.

    If the above troubleshooting steps did not work, we recommend connecting your phone to the Nokia Suite to check download the available update. If the phone is up-to-date, try to reinstall it. You can download the Nokia Suite here: www.nokia.com/nokiasuite

    Hope this helps.





  • RELEVANCY SCORE 2.47

    DB:2.47:The Exchange Server Address List Failed To Respond xk


    Hi Experts,
    i am geeting below error .
    the exchange server address list failed to respond
    Suddendly i faced this issue when tried to create a new mailbox in Exchange Server 2007.it was working fine .
    pls suggest.
    Rgds,
    Balwan Singh,

    DB:2.47:The Exchange Server Address List Failed To Respond xk

    thank it is working now by restarting Micorsoft System Attedent Service.....
    but my why it behave like this??
    Rgds,
    Balwan Singh

  • RELEVANCY SCORE 2.47

    DB:2.47:Vcbmounter zd



    When I try to vcbMount with

    \----

    vcbMounter -h ipaddress -u user -p passw -a ipaddr:name -r c:\backups\fullvm -t fullvm -m san

    Loading symbol information...

    ...done

    \[2006-09-14 15:37:57 'App' info] Current working directory: C:\Program Files\VMware\VMware Consolidated Backup Framework

    \[2006-09-14 15:37:57 'vcbMounter' info] Connecting to host ipaddress on port 9005

    \[2006-09-14 15:38:18 'vcbMounter' error] Error: Other error encountered: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

    \----

    Everytime I get this error message. Which port do I have to connect through, and how do I open this ports on ESX server.

    Peter

    DB:2.47:Vcbmounter zd


    If I use port 902, it get this error:

    Pipe connection has been broken

    I would like to use vcbMounter.exe just to test if this really mounts virtual disk to my backup proxy.

    Peter

  • RELEVANCY SCORE 2.46

    DB:2.46:Getting Error While Powering On Vm On Esx 3 xc



    We have setup a new ESX 3.0 host. A VM has been created and Win2K3 ISO has been mounted. However, when we power on the VN we get the following error:

    Error:connecting: cannot connect to host 192.168.12.222. A connection attempt failed because the connected party did not properly respond aftera period of time, or established connect failed because connected host has failed to respond. Do you want to try again.

    DB:2.46:Getting Error While Powering On Vm On Esx 3 xc


    I found the issue with my setup. The default gateway was not properly configured so the VMs couldn't connect.

  • RELEVANCY SCORE 2.46

    DB:2.46:Apache And Jboss Configuration fs



    Dear friends,.

    i have a problem with apache and jboss communication.

    I have install apache2.2.15 on window server 2008 R2 and jboss4.2.3(GA) also different window server 2008 R2

    both server on different machine.

    I am using reverse proxy to communicate both server

    when i am accessing my application then some times its working properly but some time its giving output

    The page you are looking for is Temporarily Unavailable

    Please Try again later

    In apache log i found this error

    [Mon Sep 10 17:50:47 2012] [error] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : proxy: HTTP: attempt to connect to 192.168.10.8:8081 (192.168.10.8) failed

    [Mon Sep 10 17:50:47 2012] [error] ap_proxy_connect_backend disabling worker for (192.168.10.8)

    this is my jboss server ip 192.168.10.8

    DB:2.46:Apache And Jboss Configuration fs


    Dear friends,.

    i have a problem with apache and jboss communication.

    I have install apache2.2.15 on window server 2008 R2 and jboss4.2.3(GA) also different window server 2008 R2

    both server on different machine.

    I am using reverse proxy to communicate both server

    when i am accessing my application then some times its working properly but some time its giving output

    The page you are looking for is Temporarily Unavailable

    Please Try again later

    In apache log i found this error

    [Mon Sep 10 17:50:47 2012] [error] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : proxy: HTTP: attempt to connect to 192.168.10.8:8081 (192.168.10.8) failed

    [Mon Sep 10 17:50:47 2012] [error] ap_proxy_connect_backend disabling worker for (192.168.10.8)

    this is my jboss server ip 192.168.10.8

  • RELEVANCY SCORE 2.46

    DB:2.46:Lr 5.3 Wont Respond When I Try To Import. Why And How Can We Fix This Asap! z3



    Does anyone else have this problem?

    DB:2.46:Lr 5.3 Wont Respond When I Try To Import. Why And How Can We Fix This Asap! z3


    A few more details would really be helpful. Are you able to open the import dialog? What do you see? What are you tried? What OS are you using? Have you been able to import in the past?

  • RELEVANCY SCORE 2.46

    DB:2.46:Interim Fix For Ios6 Wifi Victims... ss


    Interim Fix for IOS6 WiFi victims...I was able to get the WiFi on ios6 working! Multiple clients that I provide support to have been plagued by the WiFi loss with upgrading to IOS6 on multiple iDevices (4S/iPad2,3). Some devices worked at home but not at office; some at office but not at their homes. Not every device; not on every network. I tried every suggestion I could read to no avail. When reading a recent post regarding 802.1 standards I light bulb went off in my head try an older router! I pulled out an old Netgear WGR614v# I had in a closet, reset it to factory setting, went through a basic setup and voila! the first two devices (4S/iPad2) connected the first time (no security set). Set security to WPA-PSK and it would NOT connect; set at 40/64-bit WEP it DID connect. So I can recomment some level of security though not the desired level.Hopefully Apple will own-up and get this resolved so our iLives can return to normal!

    DB:2.46:Interim Fix For Ios6 Wifi Victims... ss

    Interim Fix for IOS6 WiFi victims...I was able to get the WiFi on ios6 working! Multiple clients that I provide support to have been plagued by the WiFi loss with upgrading to IOS6 on multiple iDevices (4S/iPad2,3). Some devices worked at home but not at office; some at office but not at their homes. Not every device; not on every network. I tried every suggestion I could read to no avail. When reading a recent post regarding 802.1 standards I light bulb went off in my head try an older router! I pulled out an old Netgear WGR614v# I had in a closet, reset it to factory setting, went through a basic setup and voila! the first two devices (4S/iPad2) connected the first time (no security set). Set security to WPA-PSK and it would NOT connect; set at 40/64-bit WEP it DID connect. So I can recomment some level of security though not the desired level.Hopefully Apple will own-up and get this resolved so our iLives can return to normal!

  • RELEVANCY SCORE 2.46

    DB:2.46:Unable To Login f8


    hi all,

    I am Unable to login from OBIEE answers into bipublisher it says,, contact administrator I am using Username/password as Administrator/Administrator

    It was working till yesterday.. where I have to look for this problem ..

    Please advice ..
    Error message:

    Oracle BI Publisher Enterprise
    Error processing your BI Publisher request. Please contact your administrator to review the log files.
    Error Details
    Error Codes: S8VLP8HS

    when I try to look in log file in C:\OracleBI\server\Log\NQServerlog

    this is what i can read from that :

    2010-09-27 19:18:32

    [nQSError: 12002] Socket communication error at call=recv: (Number=10060) A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

    what is the solution for this ..... Please advice.

    Thanks
    newobiee

    Edited by: user642877 on Sep 27, 2010 4:19 PM

    DB:2.46:Unable To Login f8

    Hi all,

    I got the solution ...

    i want to share the solution : step1 ) set the password for Administrator/Administrator
    by step1 we can login but can not see the admin tab;
    step2 ) In the C:\OracleBI\xmlp\XMLP\Admin\Configuration\xmlp-server-config.xml

    Edit the property SECURITY_MODEL and change it to XDO. i.e. for example property name=SECURITY_MODEL value=XDO/.

    Thanks to
    (http://oraclebizint.wordpress.com/2007/11/06/oracle-bi-publisher-and-bi-ee-invisible-admin-tab/)

    Thanks and Regards

  • RELEVANCY SCORE 2.46

    DB:2.46:Webservice 13


     A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond

    DB:2.46:Webservice 13

    Ok. So where's the question?Lucian Baciu, MCTS,
    http://studentclub.ro/lucians_weblog

  • RELEVANCY SCORE 2.46

    DB:2.46:Validation Wizard Generating Tls Errors For Ee Pool And Edge Servers ff


    I am receiving several validation errors on an EE Pool server when it attempts to make a TLS connection. Everything else looks good including certificates. Both the EE Pool and the Edge servers are load balanced by the same Load Balancer (BigIP). This problem
    only occurs from the FE servers there are no TLS problems from clients or other locations.

    TLS connect failed: 10.182.29.10:5061 Error Code: 0x274c A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to
    respond 10.182.29.10:5061
    TLS connect failed: 10.182.29.11:5061 Error Code: 0x274c A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed
    because connected host has failed to respond 10.182.29.11:5061

    DB:2.46:Validation Wizard Generating Tls Errors For Ee Pool And Edge Servers ff

    Definitely a load balancer issue. Which we rectified but modifying SNAT on the loadb balancer however the validation wizard was still generating an error

    Routing trust check and MTLS connectivity:

    However this is explained it as a bug in the validation wizard and I'm happy to accept that explanation.
    http://social.technet.microsoft.com/Forums/en/ocsplanningdeployment/thread/eb7909ec-16ff-401b-97ea-7b101db01dbc

    Routing trust check and MTLS connectivity: Received a SIP
    failure response...

  • RELEVANCY SCORE 2.45

    DB:2.45:Phishing Scam [Edited] 1s



    Be aware that there is a Verizon wireless phishing scam . Victims get an E mail purported to be from Verizon. It is a bill.

    If you get this very official looking E mail, forward it to phishing@verizonwireless.com

    DB:2.45:Phishing Scam [Edited] 1s


    KaLin I do not have a wireless phone. I can not go to that forum. One of my sub E mail accounts received a phishing scam E mail. Perhaps, you as a forum moderator, would see that this message is conveyed to the wireless forum. I need no help!! I do not pay any bills I have not accumulated. I only wished to inform others. Many of our forum members also have Wireless phones.

  • RELEVANCY SCORE 2.45

    DB:2.45:Validation: Another Microsofts Abuse! cx


    With validation procedure as it is now carried out, Microsoft is once more hitting the victims.
    Of course it is much easier to threaten a customer who has already ben cheated in his purchase than to search and punish the cheaters.
    This is highly unfair. 

    DB:2.45:Validation: Another Microsofts Abuse! cx

    Alberto,
    Microsoft has been actively pursuing the cheaters, too:  http://www.google.com/search?hl=enlr=q=microsoft+sues+software+piracy

  • RELEVANCY SCORE 2.45

    DB:2.45:Windows 7 Pc Gets Disconnected In The Beginning Of The Backup 9m


    I've Googled, Binged andwent overtopics here, but haven't found anything related.I've got a Win7 laptop andWin7 PCwhich should be backed up by the WHS. Laptop is backed up just fine with no issues, but when I try to back up the PC, after backup is starting message, when backup service should be monitoring changes on partitions, PC gets disconnected from the home network and thus, the backup process is stuck. Disabling/enabling network adapter gets PC back on the network (but only after backup is cancelled, if not, it gets disconnected immediately after reconnection).
    The only thing I've tried so farwas reinstalling connector software. no success. Also, I've downloaded connector troubleshooter and only thing it says is DHCP server was not found. I'm not good with networks, so I couldn't figure out what could that indicate (all computers in the network are assigned static IPs).Any suggestions?P.S. The last log is like this:
    Created at 1/18/2010 9:59:50 PM

    ***** Started at 1/18/2010 9:59:50 PM ***

    ***** Started at 1/18/2010 9:59:50 PM ***

    [1]100118.215950.3932: Status: Start

    [1]100118.220004.0547: Status: Connect to server WHSPC, session d5d95a5b-58c8-4ae3-9e0e-7baa0edef70b, protocol 20

    [1]100118.220004.6535: Status: Volume 8be814c8-feaf-11d5-a9de-806e6f6e6963 = E:

    [1]100118.220004.6547: Status: Volume e843de38-ac34-11de-ad79-00134945b7f6 = G:

    [1]100118.220004.6547: Status: Volume 8be814c9-feaf-11d5-a9de-806e6f6e6963 = C:

    [1]100118.220004.6560: Status: Volume 25f34633-accb-11de-aeda-00134945b7f6 = H:

    [1]100118.220006.5072: Status: Acquire volume shadows

    [1]100118.220013.4686: Status: Volume 1 of 4 is E: size 41943040000 used 23700959232

    [1]100118.220014.1323: Status: Start volume E: using \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy30

    [1]100118.220014.3348: Status: Volume (shadow) size 41943035904 used 24596701184

    [1]100118.220017.7824: Status: File records: 9991 sent, 9974 changed, 17 metadata, 0 received (bytes sent=180224 received=1)

    [1]100118.220017.7887: Status: Prepare fixups: total restore size 41943035904

    [1]100118.220017.9099: Status: Determine changed: scan 3238499 size 13264891904

    [1]100118.220036.8014: Error: ReconnectableStream: Write catch IOException Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host., generation 1, reconnect

    [3]100118.220036.8264: Error: ReconnectableStream: Read catch IOException Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond., generation 1, reconnect

    [1]100118.220057.8555: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 2, reconnect

    [1]100118.220057.8568: Error: ReconnectableStream: reconnect attempt failed, waiting

    [1]100118.220128.8537: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 2, reconnect

    [1]100118.220128.8537: Error: ReconnectableStream: reconnect attempt failed, waiting

    [1]100118.220138.8541: Error: ReconnectableStream: TryReconnect catch SocketException A socket operation was attempted to an unreachable host 192.168.1.2:8912, generation 2, reconnect

    [1]100118.220138.8541: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220220.0220: Error: ReconnectableStream: Read catch IOException Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond., generation 2, reconnect

    [1]100118.220220.0220: Error: ReconnectableStream: Write catch IOException Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host., generation 2, reconnect

    [3]100118.220239.4386: Error: ReconnectableStream: TryReconnect catch SocketException An established connection was aborted by the software in your host machine 192.168.1.2:8912, generation 3, reconnect

    [3]100118.220239.4386: Error: ReconnectableStream: reconnect attempt failed, waiting

    [1]100118.220323.2390: Error: ReconnectableStream: Write catch IOException Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host., generation 3, reconnect

    [3]100118.220323.2390: Error: ReconnectableStream: Read catch IOException Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond., generation 3, reconnect

    [3]100118.220331.2016: Error: ReconnectableStream: TryReconnect catch SocketException An established connection was aborted by the software in your host machine 192.168.1.2:8912, generation 4, reconnect

    [3]100118.220331.2016: Error: ReconnectableStream: reconnect attempt failed, waiting

    [1]100118.220415.0008: Error: ReconnectableStream: Write catch IOException Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host., generation 4, reconnect

    [3]100118.220415.0008: Error: ReconnectableStream: Read catch IOException Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond., generation 4, reconnect

    [3]100118.220436.0011: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220436.0011: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220507.0079: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220507.0079: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220538.0083: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220538.0083: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220609.0088: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220609.0088: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220640.0123: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220640.0123: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220711.0275: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220711.0275: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220742.0280: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220742.0280: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220813.0322: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220813.0322: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220844.0339: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220844.0339: Error: ReconnectableStream: reconnect attempt failed, waiting

    [3]100118.220915.0344: Error: ReconnectableStream: TryReconnect catch SocketException A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 192.168.1.2:8912, generation 5, reconnect

    [3]100118.220915.0344: Error: ReconnectableStream: No successful reconnections in 300 seconds, giving up

    [3]100118.220915.0569: Error: BackupProtocol: AsyncReader caught Protocol exception Client / Server connection lost, reason ConnectionLost, details timeout attempting to reconnect

    [1]100118.220915.4032: Status: Exception: ConnectionLost

    [1]100118.220915.4032: Status: : timeout attempting to reconnect

    [1]100118.220915.4044: Status: Bytes sent=1523712, bytes received=105, 4 reconnects

    DB:2.45:Windows 7 Pc Gets Disconnected In The Beginning Of The Backup 9m

    Al, I upgraded driver only once via WU and it was before 2010, so RollBack should've loaded2009 driver. And it's Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller.Thanks for reply.

  • RELEVANCY SCORE 2.45

    DB:2.45:Status: 10060 A Connection Attempt Failed Because The Connected Party Did Not Properly Respond sp


    Hi,

    I've enabled some services from a purchased GoDaddy SSL certificate in Exchange 2007, then imported that certificate in ISA along its private key , then publish a Web Mail Web server then created my Web listener.

    From the public network, when I try to connect to the public FQDN, I get the below error message:

    Log type: Web Proxy (Reverse)
    Status: 10060 A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
    Rule: OWA
    Source: External ( 60.242.187.32:0)
    Destination: (webmail.domain.com.au 192.168.0.110:443)
    Request: GET https://192.168.0.110:443/owa
    Filter information: Req ID: 063a7718
    Protocol: https
    User: anonymous

    Not sure what's this reverse proxy means. Any idea?

    DB:2.45:Status: 10060 A Connection Attempt Failed Because The Connected Party Did Not Properly Respond sp

    Thanks Anders....it is split DNS issue....i wasn't able to ping the public FQDN internally due tomissing MX record in the internal DNS.

  • RELEVANCY SCORE 2.44

    DB:2.44:Why Does The Camera Not Respond To Tapping? pf


    I have used UITapGestureRecognizer so that an instance of UIImageView will respond to tapping when applied to images. However, so far, the camera does not respond to anything I try in this regard.Could it be that the camera view does not respond to tapping?Thanks.

    DB:2.44:Why Does The Camera Not Respond To Tapping? pf

    I have used UITapGestureRecognizer so that an instance of UIImageView will respond to tapping when applied to images. However, so far, the camera does not respond to anything I try in this regard.Could it be that the camera view does not respond to tapping?Thanks.

  • RELEVANCY SCORE 2.44

    DB:2.44:A Connection Attempt Failed Because The Connected Party Did Not Properly Respond After A Period Of Time, Or Established Connection Failed Because Connected Host Has Failed To Respond 81


    Hi, I'm trying to connect a remote mysql database. I'm doing it from a vb.net 2005 application with a connector mysql.data.dll What's happening is, suppose if I try to connect thrice it connects twice and once throwing an exception that says - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. there's nothing wrong with the code, otherwise it would never have connected Can sombody help?? Thanks in advance

    DB:2.44:A Connection Attempt Failed Because The Connected Party Did Not Properly Respond After A Period Of Time, Or Established Connection Failed Because Connected Host Has Failed To Respond 81

    Hi, Thanks again for your reply. I've figured it out. What It was, conn.ConnectionString = server= My.Settings.txtServer ; _ user id= My.Settings.txtUsername ; _ password= My.Settings.txtPassword ; _ database= My.Settings.txtDB ; I've changed it to, conn.ConnectionString = server= My.Settings.txtServer ; _ user id= My.Settings.txtUsername ; _ password= My.Settings.txtPassword ; _ database= My.Settings.txtDB ; _ Connect Timeout=30; It's working properly now.

  • RELEVANCY SCORE 2.44

    DB:2.44:Problem With Proxy Service dm



    Hi,

    On my Fuse ESB, I've just deployed a new project containing one route which is actually a proxy service for an existing http entrypoint:

    I had to add the bridgeEndpoint option, to avoid issues (host parameter null), but when I try to run this route, I'm always getting the following exception:

    09:34:25,052 | ERROR | qtp6201214-719 | DefaultErrorHandler | 77 - org.apache.camel.camel-core - 2.7.1.fuse-00-43 | Failed delivery for exchangeId: ID-PC016313-1328-1313995272864-19-1. Exhausted after delivery attempt: 1 caught: org.apache.commons.httpclient.NoHttpResponseException: The server B2BdbBNBB27 failed to respond

    org.apache.commons.httpclient.NoHttpResponseException: The server B2BdbBNBB27 failed to respond

    Altough my http entrypoint is active and can be accessed without any problems.

    Do I need to specify some additional headers to get this working ?

    DB:2.44:Problem With Proxy Service dm


    Apparently the problem seems to be related to my client initiating the http request. When I use another client, the issue is solved...

  • RELEVANCY SCORE 2.44

    DB:2.44:Failed Update Master Repository cx


    Has anyone else started having problems with the master repository update failing?

    As of this morning I'm getting the follow error:
    Failed to download file Current\VSCANDAT1000\DAT\0000\avvdat.ini from site update.nai.com:80, error code 10060 ( A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. )

    DB:2.44:Failed Update Master Repository cx


    Good news - at least you can pull successfully

    Regards -

    Joe

  • RELEVANCY SCORE 2.44

    DB:2.44:Nokia X3-02 - Wlan Issue!!!! ("Link Not Available"... aj



    Bought my X3-02 coupla months since then haven't been able to use my home Wireless network. Connection is not the problem but I CAN'T USE IT!!!!It connects to the wireless network but when I try to use it it says "Link not available".

    I did surf the net for solutions but seems like many other victims of X3-02 are sufferin this problem and haven't seen a proper legitimate solution yet. Anyone aware of any solutions?

    Nokia please read our posts and humble yourself!

    DB:2.44:Nokia X3-02 - Wlan Issue!!!! ("Link Not Available"... aj


    hey i am aslo kinda having the same prob from y'day onwards..bt b4 dis it was ok...it is whn im using my ovi chat...it keeps saying..temporary service problem (code500)..bt my wifi conn is ok..it has no prob...bcs of dis ppl cant chat wid me nor c me on9..pls help!! thanks in advance...

  • RELEVANCY SCORE 2.44

    DB:2.44:Httprequest Without Exception? cs


    Dim URLReq As HttpWebRequest
    Dim URLRes As HttpWebResponse

    Try
    URLReq = HttpWebRequest.Create(ListBox1.Items.Item(ProgressBar2.Value))
    URLRes = URLReq.GetResponse
    Catch ex As Exception
    MsgBox(Server Failed to Respond)
    GoTo finished3
    End Try
    any way to do this without using Try Catch? because it will throw a exception if the uri given is wrong or if the server refuses request.Ownage to your Door

    DB:2.44:Httprequest Without Exception? cs

    ty. ive all ready thought of using goto, but i want a way to, i guess peek at what the request will return so i dont have to handle any errors at, not even intercept them. although i think ill just leave it how it is with the try catch since that part of the ap wont actually suffre any performance loss. is GoTo faster then try catch at responding?Ownage to your Door

  • RELEVANCY SCORE 2.44

    DB:2.44:Please Change Request Of Earth Quake Victims Of Japan 39



    Earth quake victims of Japan

    I would suggest changing the title Paypal uses for Japan Earthquake relief.

    Japan needs Your help: to: Japan needs OUR help. To single out an individual for the relief of Earthquake victims is one sided and ambiguous at best. When asking for relief help it should feel as an effort of many not as a singular attempt to request funds for relief.

    Just a suggestion:Island Heat Has donated as it can for the relief effort.

    DB:2.44:Please Change Request Of Earth Quake Victims Of Japan 39


    Welcome to the boards!

    Thanks Islandheat! I'll make sure your feedback is passed along, we do appreciate it!

    Take care,

    Adrian




    Was my post helpful? If so, please give me a kudos!Did my post solve the issue? If so, please accept it as a solution!

  • RELEVANCY SCORE 2.44

    DB:2.44:Some One Please Answer This, Every Time I Go Into Application Loader It Says, Application Failed Codesign Verification Go Into Application Loader And Try To Publish A App It Says, Please Go Into Depth Im A Beginner, And Use Gamesalad 91


    some one please answer this, every time i go into application loader it says, application failed codesign verification , please go into depth im a beginner, and only use gamesalad please respond as soon as possible!

    DB:2.44:Some One Please Answer This, Every Time I Go Into Application Loader It Says, Application Failed Codesign Verification Go Into Application Loader And Try To Publish A App It Says, Please Go Into Depth Im A Beginner, And Use Gamesalad 91

    yes i did sorry for the late response LOL plus it was just a minor error! Just check to make sure u have all of ur correct distribution/developer/and creator certificates in your keychain access installed and up-to-date! Plus i have had over 900 downloads on that game!! ^^ -CHEERS /RYAN

  • RELEVANCY SCORE 2.44

    DB:2.44:Mike Posner - Heaven (Dedicated Newtown School Victims ) d9



    I haven't posted here in so long. I'm just feeling so very sad, crying.... :-( I wanted to share this song with our amazing community because it describes my feelings excactly. http://www.youtube.com/watch?v=Jy3qplsjH1glist=UUTaevJgpY78By0ELxeJmQpAindex=1




    3D Concepts Professional Licensed Textures

    DB:2.44:Mike Posner - Heaven (Dedicated Newtown School Victims ) d9


    "Not" politicizing something is by its nature politicizing. It is a way of saying that what many feel should be done is not right. Silence is never the answer to crisis or tragedy, and least of all, to villainy.

    This is exactly the right time to get hyper-political about it, and force all of those "leaders" to come to solutions before they can move on to some other issue.

    For me, of late, this is the song that has been in mind in regards to this. A call for action and change.

    World Cry - Sizzla Kalongi

  • RELEVANCY SCORE 2.44

    DB:2.44:Madoff Scam- Not Sure Where To Post This 7a



    Like I said, I am not sure where to post this or even if it is allowed here since its not about credit but about money. So I apologize in advance.

    I read about Kevin Bacon now needing work because his savings/investments are now all gone. This gets me thinking about those who put money with Madoff. As much as I can say they were victims of Madoff's scam, I can't help but to think that instead, they are truely victims of their own greed.

    All that I know about Madoff and why he was so wanted in the public eye is because his returns yielded high returns. Which then caused the rich to run to him so they too can get in on it.

    People in the investment business have all said that the returns he claimed are next to impossible to produce yet people ran to Madoff to have him invest their money.

    In a way, I don't feel that these victims should get any pity because they were victims of their own greed.

    Am I alone on this?




    If you can't do it right the first time, then maybe skydiving isn't your thing 4/1: TU 654. EQ 658. EX 651.

    DB:2.44:Madoff Scam- Not Sure Where To Post This 7a

    jmeek08 wrote:Well, if you had that kind of money you either earned it by hard work or by taking risk. If you earned it through hard work then you would not need to worry about getting those high returns but if it was risk taken that paid off for you then you will continue to take risk for the best possible returns. I plan on working hard and setting goals to get where I need to be. Risk are always going to be involved but you can limit your risk.Bottom line: The people giving their money to madoff chose to make money by risking it for higher returns which they knew was a risk but decided to do it anyway. No, I do not feel bad about them losing their money they chose to take that risk and its only their own fault.
    actually, many who have 'that kind of money' risked nothing to get it and didn't lift a finger to earn it. they inherited it. this continues to be the mechanism bywhich we see some of the highest concentrations of wealth across cultures.

    i think it's rather unfortunatewhenwe fail to identify with hardship of others based onquestionable assumptions and overgeneralizations about whothe victims are (or aren't)and how they got there. imho, it is sadwhen anybodyin good faith makes alegitimate attempt toinvest (in what was falsely and misleadingly presented as a sound endeavor) andthen getsscammed.

    of coursethose affected bythe madoffscam will suffervaryingdegrees of personal and financial impact. and some may still lead far from pitiful lives--butto be scammed isbad news for any human being. even the expertssometimes make unwise decisions about investments... to me, the blaming the victimperspective (be they rich and ill advised,or not so rich and ill advised) has become a bittrite with overuse.




    FICOS:06/13 EX 765 (PSECU) EQ 771 (DCU) TU 779 (Barclays)

  • RELEVANCY SCORE 2.44

    DB:2.44:Ata4: Comreset Failed x7


    Hi, I am facing the following error while booting the linksys NAS box NSS6000. ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4) ata3: port is slow to respond, please be patient ata3: port failed to respond (30 secs) ata3: COMRESET failed (device not ready) ata3: hardreset failed, retrying in 5 secs ata3: port is slow to respond, please be patient ata3: port failed to respond (30 secs) ata3: COMRESET failed (device not ready) ata3: hardreset failed, retrying in 5 secs ata3: port is slow to respond, please be patient ata3: port failed to respond (30 secs) ata3: COMRESET failed (device not ready) ata3: hardreset failed, retrying in 5 secs After booting it didn't detect the SATA hard disk in the console prompt. I kindly request you to resolve this issue ASAP... Regards Sathishkumar.P

    DB:2.44:Ata4: Comreset Failed x7

    hi sathish, for now i think what we can do is to try to isolate the problem. have you tried to plug the hard drive to your computer and check if it will be dtected by your pc?

  • RELEVANCY SCORE 2.44

    DB:2.44:Failed To Start Because (Account Name) Did Not Respond 8f


    I just got an isight, and I'm trying to video chat with my brother in NY. He's on a Windows XP Home, using broadband, without a router. He downloaded AIM. We both can see each other signed on, and the video icon comes up. He invites me to a chat, than I accept. I than get the message Failed to start because (account name) did not respond. When I try to invite him to a video chat nothing happens, on his end. I'm using a D-Link router and I've investigated opening some additional ports. Should this solve our problem?