• RELEVANCY SCORE 3.77

    DB:3.77:Spaces Has No Concept Of Monitors zp





    Spaces is unusable for me, as I use one of my monitors to do a permanent task, and I want to be able to use Spaces within the second monitor. The only way for me to do this is to set that program to share all spaces.

    The second big deal is that I run Parallels in full screen with both Ubuntu and XP. In order to switch to one of these screens, I have to switch the content of both monitors. It means I can't use spaces to multitask, do something in one monitor, change the space of the second monitor while keeping the content in the first.

    Currently, spaces treats the entire expanse, among all monitors, as a single space.

    I'm not saying this should change, there should just be a preference to allow this.

    DB:3.77:Spaces Has No Concept Of Monitors zp

    I agree that it would be useful to put space #1 on screen #1 and space #3 on screen #2 independently. hit F8 and the hidden spaces can be chosen for the screen the mouse is on.

    However, I can see problems for this when screens are different sizes.

    Anyway, I'm 99% happy with how spaces works, EXCEPT:

    When using two monitors, and pressing F8 to view spaces, the reduced size display of each screen is only shown on one of the two monitors. Both monitors should show the same thing in this case.... or Monitor 1 shows the Monitor 1 portion of all spaces, and monitor 2 shows the monitor 2 portion of all spaces. Currently monitor 1 shows the monitor 1 and monitor 2 portions of all spaces and monitor 2 shows nothing. Second monitor is not used at all in F8 mode.

    -Matt

  • RELEVANCY SCORE 2.98

    DB:2.98:Spaces Has Stopped Responding To Control Keys mj





    Spaces has stopped responding to the control keys. I tried rebooting, no dice. Checked preferences for spaces: they're OK. Using an apple keyboard, and 2 monitors. It worked till most recent update (Safari 4.0.1). Can still switch, but only by selecting application based switching (no convenient!). Any suggestions gratefully received.

  • RELEVANCY SCORE 2.91

    DB:2.91:Flying Spaces sk





    i like the concept of spaces, but sometimes when i am working in one space suddenly the screen toggles to a different one. also, sometimes when i toggle to a new space, it immediately goes back to teh previous space, before i can do anything. is this a spaces problem or something i'm doing wrong?

    DB:2.91:Flying Spaces sk

    The strange behavior of Spaces changing the space on its own is not eliminated in 10.5.2, it is greatly reduced. Ive only had it occur 2 or 3 times in the last few weeks. Before 10.5.2 it occurred several times per day.

    When you do update, many people have strongly recommended on this forum, to use the Combo Update to prevent introducing any new problems. It can be found at:

    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1052comboupdate .html

    It is commonly recommended also that a Repair Permissions and Repair Disk are run from Disk Utilities before and after the update.

  • RELEVANCY SCORE 2.80

    DB:2.80:Fp Sc 11 - Work Space Concept ( Request For Info ) k3


    As per my understanding , the work space simply speaking , is a place that :
    1- has it's own fields.
    2- has it's own work flow.
    3- has it's own data ( tickets ) , which is separated from other work spaces.

    please i need the following :
    1- Confirm point number 3 in the above article.
    2- provide more details , or references pages where i can find details about the properties of the work space ( the concept of a work space ) .

    Regards,
    M.Saber

    DB:2.80:Fp Sc 11 - Work Space Concept ( Request For Info ) k3


    Hi Mohammed,

    I confirm point number 3

    Each workspace has its own:

    - Project option

    - Mail preferences

    - Agents

    - Customers

    - Roles

    - Preferences templates

    - Escalations

    - Change manager processus/phases

    - etc...

    (All options in administration == Workspace)

    Hope this help,

    Jean

  • RELEVANCY SCORE 2.79

    DB:2.79:Remote Login Like Terminal Services In Windows.... 98


    Hey all - I have no idea where exactly this post belongs so mods, if I'm off, please move me. This was just my best guess.

    I have a Mac Pro with 6 monitors on it. A 30", 3 22s, a 24 and a 19. The challenge is that when I try to VNC into the machine, navigating through all those monitors AND spaces is just not that helpful. I was hoping there might be a way to create another user or another login style where I could specify the screen size, or perhaps the logging in device's screen size would pass through - just like using RDP with a Windows box. Specifically, I'd like to be able to login to my machine on a "screen" that matches my iPad.

    Is the domain of Server only, or is there an option here?

    Thanks in advance,
    /perk

    DB:2.79:Remote Login Like Terminal Services In Windows.... 98

    Hey all - I have no idea where exactly this post belongs so mods, if I'm off, please move me. This was just my best guess.

    I have a Mac Pro with 6 monitors on it. A 30", 3 22s, a 24 and a 19. The challenge is that when I try to VNC into the machine, navigating through all those monitors AND spaces is just not that helpful. I was hoping there might be a way to create another user or another login style where I could specify the screen size, or perhaps the logging in device's screen size would pass through - just like using RDP with a Windows box. Specifically, I'd like to be able to login to my machine on a "screen" that matches my iPad.

    Is the domain of Server only, or is there an option here?

    Thanks in advance,
    /perk

  • RELEVANCY SCORE 2.72

    DB:2.72:User Input Into Associative Array For Comparison With String jf


    Inthe scriptit selects a predefined variable $secretWord that is a associative arrayin the format of I N T E L.(spaces between each letter)
    Iask the user to input a name using Read-Host and assign the input tothe variable $reply, (no spaces between the letters)which Ineed to be able to compare with the $secretWord to see if they match.

    I use a if statment to docompare the variables
    if ($reply -eq $secretWord) {
    do something
    }

    But because the predefined variable $secretWord has a form at of I N T E L (spaces between each letter)and theUser inputed $replyhas the format of INTEL (no spaces between the letters) the compare is always false. and the process fails.

    Now to the Questions

    How do you get user input formRead-Host into an associative array in the format of I N T E L (spaces between each letter) so the -eq operator in the if statement would result in a true condition?

    Or how would youconvert /read from an associative arraythat has format of I N T E L (spaces between each letter) into a string with no spaces between each letter so thatthe-eq operator in the if statement would result ina
    true condition

    All help and comments will be gratefully acceptedalan schroeder

    DB:2.72:User Input Into Associative Array For Comparison With String jf

    Thank you for the tips, this worked like a charm. I learned a lot
    Again thanksalan schroeder

  • RELEVANCY SCORE 2.72

    DB:2.72:Gui Downlaod Issue dd



    I have to download the text file in the following format. There should be only 12 spaces after number '2' in the first line of text file and 6 spaces in the second and third line and 24 spaces in the footer line but I am not able to restrict it and has the entire remaining space(140 char) of that line.

    Kindly help me how to solve this.

    H SSS 0909180001 2(12 Spaces)

    D0000001 00000080 700000 23456789 (6 Spaces)

    D0000002 00000081 720041 30000000 (6 Spaces)

    T0000002 0000000232324(24 spaces)

  • RELEVANCY SCORE 2.70

    DB:2.70:Ghost Spaces For Certain Fonts. 9d


    I have a generated document, generated in house, where a specific set of text has for lack of a better term ghost spaces. When one highlights the text and copies and pastes, the spaces are there. But the document when being viewed or printed does not have those spaces. For example this text:

    BANK OF AMERICA

    views and prints like the above text, no kerning or tracking issues with the text or spaces in between. But to search for BANK fails in the reader. Search for B A N K (with spaces) will hit that line.

    Here is the internal adobe document text:

    0 22 Td (________________________________________________________________________________) Tj
    0 22 Td (From: BANK OF AMERICA) Tj
    /F0 -10 Tf
    0 0 Td ( XXXXXX XXXXXX) Tj
    0 11 Td ( MISC ZZZZZZ GROUP PH: XXX-XXX-XXXX) Tj

    As you can see BANK has no spaces in the document code. This seems to only apply to text using this font...other fonts do not have ghost spaces.

    Is this a bug with Adobe reader, or is does this generated document have an issues with the font being used which causes spaces for searching and clipboard?

    I can provide the document in question to development if needed.

    Note using reader version 8.1

    DB:2.70:Ghost Spaces For Certain Fonts. 9d

    I can provide the document in question to development if needed.

    You're not talking to Adobe here, just fellow users but yes, it may be good if you provide a link to the document.

    or is does this generated document have an issues with the font being used which causes spaces for searching and clipboard?

    That would be my first guess.

    How are you creating the document?

  • RELEVANCY SCORE 2.68

    DB:2.68:Spaces Foul Up Registry Key Launch Conditions??? 3z


     
    Wow!  I just discovered something really, really lame about launch conditions.  Apparently, when a search is specified involvinga  key that has spaces in it, the launch condition no longer is detected!  I tried this several times using keys that had no spaces, and ones that did in a setup deployemnt package in VS2008, and much to my shock I could get only empty strings returned from the searches I configured using the Launch Conditions editor when searching for keys with spaces in them!
     
    Now the possibility remains I'm doing something wrong or there's a syntax I'm ignorant of here.  But again everything's working great for me detecting reigstry keys without spaces so....anyone encounter this before????  Any ideas???
     
    Help needed urgently (as always....).
     
    Gratefully,RH
     

    DB:2.68:Spaces Foul Up Registry Key Launch Conditions??? 3z

     
    The problem I'm having may have something I wasn't able to read anywhere regarding what's allowed in the Key column of the RegLocator table of my MSI.  The text therein appears the same as that specified within VS2008....
     
    RH
     

  • RELEVANCY SCORE 2.67

    DB:2.67:Coi Concept 18



    There are a few Consolidation of Investment concept such as : IFRS , US GAAP, HGB.

    My question is :

    Do we need to configure/setting the concept in the setting or SEM BCS has default concept?

    If we need to configure/setting the concept, how to do it?

    Thanks.

    DB:2.67:Coi Concept 18


    Dan is right, showing you some particlar elements of configurations that might be used in that or another cases.

    But, generalising what was said earlier:

    The SAP SEM-BCS is a very flexible system. It allows to be configured to fulfill requirements of every accounting standard. In order to configure the proper configuration one must know all the client's requirements, how they are might aligned with the requirements, and the possible standard's implications.

    The particular technical knowledge of some copy features or versions (though, they are important) do not give you the overall picture and do not show the win-way.

    The knowledge and experience are ruled here. So, if you want to achieve more in this field, simply get more knowledge and experience. Otherwise - either ask advice in the forums or invite some 3rd party consultants.

  • RELEVANCY SCORE 2.65

    DB:2.65:No Spaces In Security Key Field? 1k


    This makes no sense at all... when a security key is a "passphrase", most people will have it be exactly that: a "phrase", which is a group of words, a sentence or a fragment thereof. ... and it works, and has worked, everywhere else.

    DB:2.65:No Spaces In Security Key Field? 1k

    Linksys WRT54G-TM, v. 5.0.33 of the software ... this is the router that Linksys customized for T-Mobile's HotSpot @ Home service. Including a space (in fact, several) in my passphrase works just fine... my Nokia 6086 phone connects, my laptops and the other computers in my office and owned by the people sharing my connection (variety of cards) all work too. This said, the caveat is that I'm not using the little customized button on the router to connect my UMA phone, and the software set up wizard that runs on a Windows box appears to have truncated the passphrase. The router itself, unfortunately, appears to be rather flakey so far (and the HotSpot @ Home and the Wi-Fi calling feature as well)... but that's another post.

  • RELEVANCY SCORE 2.65

    DB:2.65:Spaces Error &Amp; Excluded System Preferences Window cf


    After I decided to reduce the number of spaces I had from about 9 and ended up with 3, I could no longer control my system preferences. My system preferences window only appears if I use my spaces reveal corner (bottom right of screen). When clicked on in any part of the preferences window, it disappears and the display returns to one of my desktop spaces and on reviewing the preferences window by sending the cursor to the reveal corner again, areas appear greyed out (close, minimise, check-boxes etc.)and will not appear active again unless I quit the System Preferences icon in the dock. Therefore, I cannot control anything in the system preferences window/tabs.

    So somehow the preferences window refuses to work now that it does not appear in ANY of the three revealed spaces (shown together on reveal in the centre of the screen as three vertical spaces).

    How can I get my settings window and preferences to show itself again on one of my spaces instead of being hidden unless I cursor-reveal it? This settings window is important. I wish I'd never reduced the number of spaces now as this settings window has extracted itself from any of them!

    Please help?

    DB:2.65:Spaces Error &Amp; Excluded System Preferences Window cf

    Problem Solved - thank you very much indeed for your help. =D

  • RELEVANCY SCORE 2.64

    DB:2.64:Macbook With Acer 22" External Monitor dc


    I have the Acer P221W and for some reason it does not look as sharp as the 22" monitor at the apple store even though it had the same specs. Am I missing something?

    Has someone figured out the best way to "manage" the space? Is Spaces necessary with two monitors?

    Finally, while running two monitors is there a way to get the Menu at the top to show up on the external monitor? For example, when iPhoto is open on my external monitor, the menu is still at the top of the MacBook monitor.

    Any tips would be greatly appreciated!

    DB:2.64:Macbook With Acer 22" External Monitor dc

    You might be happier with that monitor. You might be happier with another brand, too. Check some of the user reviews of the Acer. It gets panned a lot.

  • RELEVANCY SCORE 2.64

    DB:2.64:Displaying Different Spaces In Dual Monitors jk


    Hi, all.I am using dual monitors in Mountain Lion. Can I display different spaces (desktop 1, desktop 2 or dashboard) in different monitors using mission control?Thank you.

    DB:2.64:Displaying Different Spaces In Dual Monitors jk

    Using Chrome for 2nd monitor as well.The problem is that this is an ugly workaround1) Secondary screen flashes when switching spaces while working on primary one, which is **** annoying2) I do not really want to use separate browser, and I do not really want to bind "secondary monitor apps" in this ugly restricting way3) This does not help when full-screen functionality is used on ether monitor's app, the other one is lostApple really did not think this through - Mission Control + multiple monitors - and it's so annoying that they did not review it for soo long. Please add more options! This does not have to be so difficult.

  • RELEVANCY SCORE 2.64

    DB:2.64:Leopard 10.5.2, Ati Radeon 9600 Xt, Dual Monitors And Hard Lockups sc


    So there it is. This is a PowerMac MDD FW800, ATI Radeon 9600 XT with dual monitors running Leopard 10.5.2. I set this up just yesterday without the secondary monitor (didn't have the DVI cable). Today, I now occasionally get hard lockups with the secondary monitor connected doing one of the following:

    Command-tabbing and selecting an app
    Changing Spaces
    Using Expose

    The mouse still moves, and my iTunes still plays, but that's it...I have to completely hard shut down the machine. I did not have this issue with Tiger, and I fear I will have to go back to Tiger. I have copied the ATI Xtender as par other posts, but with no luck yet. Anyone have any hints on how/why this might be happening? Thank you.

    James

    DB:2.64:Leopard 10.5.2, Ati Radeon 9600 Xt, Dual Monitors And Hard Lockups sc

    Nope...didn't have anything installed really....I had just installed Leo, then updated. Seemed to run ok the first day after an hour of use, but the next day just the hard locks. Thanks though.

  • RELEVANCY SCORE 2.64

    DB:2.64:Freeze With Spaces And Itunes sj


    Running 4 spaces. One has an iTunes video podcast running. It continually freezes. But when I invoke spaces and see the map of my four spaces, the video starts running again in the miniature window. I click on it to go back to the space and the video freezes again. Back to spaces and it's running.
    Clearly a problem with Spaces, which works flawlessly otherwise.

    DB:2.64:Freeze With Spaces And Itunes sj

    Running 4 spaces. One has an iTunes video podcast running. It continually freezes. But when I invoke spaces and see the map of my four spaces, the video starts running again in the miniature window. I click on it to go back to the space and the video freezes again. Back to spaces and it's running.
    Clearly a problem with Spaces, which works flawlessly otherwise.

  • RELEVANCY SCORE 2.62

    DB:2.62:Is It Possible To Connect 4 Monitors To A Mac Mini? xm


    I would like to use the video ports (Mini DisplayPort video out Mini-DVI video out) to connect to 2 monitors to a Mac Mini and then use 2 StarTech USB to DVI video adapters to connect 2 addition monitors (for a total of 4 monitors).

    Using Spaces is NOT an option.

    Does anybody have any comments or concerns? Will it work?

    DB:2.62:Is It Possible To Connect 4 Monitors To A Mac Mini? xm

    Other World Computing ( http://macsales.com ) sells similar usb adapters. And they have a reputation for good tech support. You might try asking them if their usb video adapters are able to do this.

    The link to their adapter is here:

    http://eshop.macsales.com/item/Other%20World%20Computing/VIDU2DVIA/

  • RELEVANCY SCORE 2.59

    DB:2.59:How Do Spaces Work Internally-Leopard? kk


    Hello All,
    I am working on drawing some kind of colored window , but with the use of spaces once the window is launced in one space it does appear in the other space.
    So i want to know on what basis does the spaces concept work is that the case here all the spaces have there own screen of desktop...with common apps running ?
    Please help and if possible provide sopme solution to my problem .
    Thnx ..

    DB:2.59:How Do Spaces Work Internally-Leopard? kk

    @mit wrote:
    I am working on drawing some kind of colored window ...

    Can you explain what you mean by that? Are you developing software of your own or trying to use some feature of the Finder? If the first, you probably will get better results by browsing posting to the developer section of Discussions at http://discussions.apple.com/category.jspa?categoryID=164, or by installing using the developer tools reference material included with the Leopard distribution (assuming you want to develop for Leopard).

    Otherwise, we will need to know more about how you are using the Finder to do this.

    Also, it will be helpful if you take the time to clearly formulate your query, using the most precise terms you can manage. Often, just doing this will help you define the issue well enough for you to solve it without outside help.

    Message was edited by: R C-R

  • RELEVANCY SCORE 2.58

    DB:2.58:Service Tax jz



    HI GURUS

    HAS ANY ONE HEARD OF THIS CONCEPT

    CAPTURING OF SERVICE TAX UNDER FREIGHT*

    I HAVE NO IDEA WHAT IT MEANS

    HELP ME OUT

    RAGARDS

    RAVI

    DB:2.58:Service Tax jz


    it means , u need to pay a service tax for the transportation. IT will happen normally for transportation module.

    A frieght vendor will be there , he transport goods for a cost of 300/ km and 12% service tax.

    calculated in tranportation shipment cost in transportaion module. In normal process also we can do it againsta freight vendor . make it it a cdn type for a frieght vendor ( combined price + service tax).and can bill it.

    regards

  • RELEVANCY SCORE 2.58

    DB:2.58:Wrapping Doesn't Work When No Empty Space In Af:Column mm


    Hi,

    I am using af:table with some af:columns. One of the column has af:outputText with value having a long string with no empty spaces. I have noWrap="false" . I see that the first line having 'large string' is truncated but all other lines having empty spaces are wrapped fine.

    Can anyone tell me how to achieve wrap on text having no empty spaces? I see that, when ever wrap doesn't happen properly, a tooltip having the whole text is displayed on hovering mouse on that column. So, In case of wrap not possible on text with no empty spaces, can we say its right behavior?

    Thanks
    -Vijay-

    DB:2.58:Wrapping Doesn't Work When No Empty Space In Af:Column mm

    Vijay,

    As you've undoubtedly seen, the docs say:

    Tooltips are automatically displayed for header and data cells if noWrap is turned off and data in the cell is truncated.I don't know of any way of making things wrap without spaces (the definition of "wrap" kind of implies breaking on whitespace or perhaps punctuation).

    And if it did wrap, consider text of "donotrap" - how should this wrap?

    donot
    rap

    dono
    trap

    :)

    John

  • RELEVANCY SCORE 2.58

    DB:2.58:Now Help Me - Onboard Video And Dvd's p3




    well my onboard video has no overlay options.

    well games cant use overlay and i cant play DVD's b/c of the overlay.. iv tryed 2 DVD programes and nether will let me.

    is it b/c i have dual monitors? b/c it works on other systems with dual monitors.

    DB:2.58:Now Help Me - Onboard Video And Dvd's p3


    I can access the overlay controls, but only while it is being used, i.e., while a DVD is playing. If I'm not playing one, then the controls are all greyed out.

  • RELEVANCY SCORE 2.58

    DB:2.58:Nagios With Rule Based System Monitoring 7z


    Hello All,
    We have setup rule based monitors in our solution manager system to monitor the satellite systems remotely. Now we want these monitors to be integrated with Nagios monitoring tool and have a central display for all the alerts. However, Nagios is not able to read the data from rule based monitors and throwing an error as No Information gathered! system up? like one below.

    Nagios works perfectly with static monitors and display alert correctly. On Nagios side we are using the config file which has below format which is only working for static monitors.

    [TEMPLATE_mgm_00]

    DESCRIPTION="DEV SMR Templates"

    MONI_SET_NAME="SAP DEV Systems"

    MONI_NAME="R3"

    PATTERN_0=*

    We have tried different patterns but its not working for rule based monitors. If any of you have worked on integrating rule based monitors to Nagios monitoring tool, please help us in configuring these things.
    Appreciate your help.

    Rg,
    Karthik

    DB:2.58:Nagios With Rule Based System Monitoring 7z


    Hello Karthik.

    Did you solve the issue?

    If not, I could help you.

    Paste here the commands.cfg and the services that you define.

    With the PATTERN_0=* it will be too hard to understand the alert

    Bye!

  • RELEVANCY SCORE 2.57

    DB:2.57:Running Oracle Forms 10g On 30 Inch Monitors 8k


    Hi!

    Oracle Forms application (10g) will not work good on 30 inch monitors. (Running NATIVE, suns javaengine)
    Most of our customers is running on 24 inch monitors with no problems.

    Has anyone had the same problem? Solution?

    Regards
    Tobias

    DB:2.57:Running Oracle Forms 10g On 30 Inch Monitors 8k

    Hi!

    Problem solved, it's working with applying the patch.

    Regards
    Tobias

  • RELEVANCY SCORE 2.57

    DB:2.57:How To Use The Dir Function When A Folder Name Includes Spaces jm


    We have a folder with spaces in the folder's name; example:Q:\SO-DoIT\ROAP\HSC EOB Master\

    strFullPath = "Q:\SO-DoIT\ROAP\HSC EOB Master\"

    If Not Dir(strFullPath, vbDirectory) = vbNullString Then FileFolderExists = True

    The above line of code returns FALSE.

    Can anyone help me solve this problem with a folder that has spaces in it's name. (And no, I can NOT change the folder's name :)

    Thank you.

    DB:2.57:How To Use The Dir Function When A Folder Name Includes Spaces jm

    It appears my problem was not that the folder name had space, but that it was a folder for wchic I did NOT have Read Access.

    Thanks for your help.

  • RELEVANCY SCORE 2.56

    DB:2.56:Mbp Lion - Turning Spaces On/Off Smoothly While Retaining Settings pp


    I switch between having my MBP setup with two additional monitors at work to using the MBP with no additional monitors at home. When I'm at home, I love to use spaces (desktops) to run different applications in different views. But when I get to work, I want to be able to just turn this off like I used to do with OS 10.6. With a quick unchecking of a box, all my spaces would be turned off and all my apps would be viewable in one screen. When I want to use spaces again, I just checked the appropriate box and viola! It was so smooth. But now it seems like I have to go to each app and set it for "this desktop" to turn off spaces. Is there a quicker way?

    DB:2.56:Mbp Lion - Turning Spaces On/Off Smoothly While Retaining Settings pp

    I switch between having my MBP setup with two additional monitors at work to using the MBP with no additional monitors at home. When I'm at home, I love to use spaces (desktops) to run different applications in different views. But when I get to work, I want to be able to just turn this off like I used to do with OS 10.6. With a quick unchecking of a box, all my spaces would be turned off and all my apps would be viewable in one screen. When I want to use spaces again, I just checked the appropriate box and viola! It was so smooth. But now it seems like I have to go to each app and set it for "this desktop" to turn off spaces. Is there a quicker way?

  • RELEVANCY SCORE 2.56

    DB:2.56:Table Spaces df


    I just started learnin Oracle at school. I can't get the concept of table spaces. Can anyone please tell me how i can relate table space to SQL Server

    DB:2.56:Table Spaces df

    Just consider a tablespace as a folder in a file directory. Within a folder there are a lot of files. The most common file type most probably is Word document. So is tablespace, it has a lot of database objects. The most important oject is a table that stores your data.

    A folder is logical. So is tablespace.

    This is the simplest concept. There is a lot more to it. That keeps DBA employ.

  • RELEVANCY SCORE 2.56

    DB:2.56:Override For Match Monitors Health? ax


    Hi,
    I need to do an override on a monitor that has 3 states - Under threshold (healthy), Over threshold 1 (warning) and Over threshold 2 (critical). I want to override one server so even when over threshold 2 it is just warning. I understand the concept of Match
    Monitors Health but if I override this setting to warning daft question but would that also therefore override even the healthy state?

    DB:2.56:Override For Match Monitors Health? ax

    I don't believe so. The health state will not change, it will still display critical in the health explorer, but the alert raised will only be a warning. The other option, if this is an option, is to just override the monitor (disable) it for
    that one computer, and create a new monitor targeting this special computer.
    I would test these things in a lab so as to ensure the expected behavior is exhibited before deploying to production.Regards, Blake Email: mengottoathotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

  • RELEVANCY SCORE 2.56

    DB:2.56:Prob In Retaining Spaces In Combo Box, Please Help Asap!! pp


    Hi
    In the application that I am working on, I have developed a screen wherein I populate the names of some schemes from the database, in a combo box (Selectoption/option/Select).
    A particular scheme in the database has a multiple-word name with double spaces between the two words, or rather between the last of the two words and the brackets.
    e.g. Help CRY (Child Relief You).
    Now, when this name is fetched fro the database, the double spaces between the CRY and ( are retained but when I display them in the combo box, i.e. between the option tags, somehow the double spaces disappear.
    Further on, in my servlet, I retrieve the same scheme name from the combo box and try to fetch some other entries from the database. At that point, since one of the spaces has disappeared, there is no database match found for the scheme name selected and I'm unable to proceed. This problem arises in the case of any number of spaces between the words while populating the combo box. It however works fine when I remove the double spaces and retain a single space between the words.
    Please let me know ASAP if combo boxes eat up such spaces and convert any number of spaces into a single space as a property or is something wrong with the JSP I have here. If this problem can never be resolved as a rule, then please tell me so that I can force the data providers to make sure they filter out such double spaces before sending the data to our databases.
    I'll be very grateful if your can help me out asap as we have to put up the site at the earliest possible date.

    Thanks a lot,
    Soumya

    DB:2.56:Prob In Retaining Spaces In Combo Box, Please Help Asap!! pp

    why not you try to set the option value, like this:

    option value="Help CRY (Child Relief You)"words you wan display/option

    Think if the display is not right it will not affect you from extracting the value.

    Regards,
    Jas

  • RELEVANCY SCORE 2.56

    DB:2.56:Dual Monitors cm



    What is the best window manager for Dual Monitors? I am interested in (nvidia) twinview with separate work spaces and wallpaper for each monitor. I do not typically run much eye candy or icons, but I do like to change scenery (wallpaper) every now and again.

    I have used Fluxbox in the past, but I understand fluxbox needs to be recompiled. Has anyone here recompiled Fluxbox for dual monitors?

    So far XFCE and gnome seem best. I have not tried KDE.

    What I am looking for is a light weight WM, *box, FWM, IceWM, etc that performs well with dual monitors.

    Any thoughts?

    DB:2.56:Dual Monitors cm


    Ive run two monitors in KDE (on SuSE 10.0, I believe) on a BFGTech nVidia 6800 OC - didnt have any major issues, but, then again, I cheated and used a graphical tool to configure it.

    ...I cant remember what program it was, though. If youre feeling lazy, I found this program (http://www.cyskat.de/dee/progxorg.htm) that may be of some help... but, only if you dont want to get your hands dirty in your xorg file

  • RELEVANCY SCORE 2.56

    DB:2.56:No. Spaces In A String cx


    Would like to know how to find out how many spaces in a given string and if there is a way to get rid of the spaces in between two words?

    DB:2.56:No. Spaces In A String cx

    my bad, m'kay, i forgot the multiline mode flag...
    i also hope that it would help OP as well
    System.out.println("a b\tc\nd aa\t\nbb".replaceAll("(?m)\\s+",""));
    // result: abcdaabb

  • RELEVANCY SCORE 2.55

    DB:2.55:Avoid Empty Spaces 83


    I am doing a lookup to a table.lookup tablehas 1 record with a space and the other table has large number of empty spaces. and I have to do a look up on the exact column which has empty spaces. Now my end result shouldn't have any empty spaces in destination. But for some reason I get populated with empty spaces. I tried to filter data using ltrim(rtrim(col)) != '' and ltrim(rtrim(col)) != space(0). But again spaces are getting in. Any ideas to avoid spaces

    DB:2.55:Avoid Empty Spaces 83

    I am doing a lookup to a table.lookup tablehas 1 record with a space and the other table has large number of empty spaces. and I have to do a look up on the exact column which has empty spaces. Now my end result shouldn't have any empty spaces in destination. But for some reason I get populated with empty spaces. I tried to filter data using ltrim(rtrim(col)) != '' and ltrim(rtrim(col)) != space(0). But again spaces are getting in. Any ideas to avoid spaces
    What do you mean by empty space? Are the columns null or are they zero-length strings?http://sqlblog.com/blogs/jamie_thomson/ | @jamiet | About me

  • RELEVANCY SCORE 2.55

    DB:2.55:Text In Certain Font, Once There, Is Now Gone. jf



    I need help!

    I created a design concept, with paragraph styles, last week using CS4 and had no trouble at all.

    I opened the file today and every paragraph that used the font Hoefler Text Black has disappeared.

    The text is still there and the hidden characters of the spaces are still visible (as you can see in the screen shot I attached). When I change the paragraph's style to another font, the text reappears.

    The other variations of Hoefler Text also still work. I can't figure out why this one font has stopped working.

    My thanks in advance,

    Justin

    DB:2.55:Text In Certain Font, Once There, Is Now Gone. jf


    If those are spaces in that screen shot, that's some pretty strange text, and why is the pilcrow in the middle of the last line?

    Does the font work in a new doc? Does it clear up if you export that documetn to .inx, open that and save as a new .indd?

    How about if you delete all Adobefnt**.lst files where ** is a number?

  • RELEVANCY SCORE 2.54

    DB:2.54:Jndi Failure. Unable To Lookup Data Source At Context Jdbc/Appsdatasource a8


    I'm not able to run my Application locally due to issue "JNDI failure. Unable to lookup Data Source at context jdbc/APPSnonXA", I did the following under debugging.

    1. Finding SPACE in DataSource, I verified
    1a. The data source for spaces and could not find any spaces. Also the "Test Connection" was successful.
    1b. The PATH, CLASSPATH variables for SPACES. Removed other Tool paths. But no Use.
    1c. Jdeveloper Installation Location Path. none of the folder names have spaces.
    1d. Application Location path. Doesn't have spaces.

    I'm attaching the log file that has the PATH,Classpath variable info.

    Please help me out.

    I did all the above by taking help of oracle forums.(https://forums.oracle.com/forums/search.jspa?threadID=q=Re%3Aoracle.jbo.DMLException%3A+JBO-27200%3A+JNDI+failure.+Unable+to+lookup+Data+Source+at+context+objID=f83dateRange=alluserID=numResults=30rankBy=10001)

    DB:2.54:Jndi Failure. Unable To Lookup Data Source At Context Jdbc/Appsdatasource a8

    After doing the following two things, The issue is resolved.

    #1:
    Configure Default Server for Datasource (Web logic console -- Data Sources -- jdbc/AppsDataSource -- Targets -- select, if not default server not selected -- Save -- restart the server.)

    Note:
    If we don't deploy while JNDI creation then below is correct. "You can select one or more targets to deploy your new JDBC data source. If you don't select a target, the data source will be created but not deployed. You will need to deploy the data source at a later time."

    #2: If The Jdeveloper is newly installed, Create a dummy UI application. run a test.jspx page.

  • RELEVANCY SCORE 2.54

    DB:2.54:Mail Double Spaces The Quoted Text Of A Reply 3p


    Using latest version of Mail, when I reply to a message, it double spaces the quoted text in the reply. Switching between composing in plain/rich text has no effect.
    Has anyone else seen this and know of a fix?

    Steve

    Mac OS X (10.4.5)

    DB:2.54:Mail Double Spaces The Quoted Text Of A Reply 3p

    when you get a mail that does this (most often it's from an aol email client user in my experience) before replying switch to the plain text version of the message, then hit reply.

    View - Message - Plain Text Alternative

  • RELEVANCY SCORE 2.53

    DB:2.53:Spaces And Cs4 c3


    I use a lot the Spaces feature in Leopard.

    I have big issues in using them with the Adobe CS3 and CS4 (wrong spaces, blank files, missing window frame etc etc).

    I asked Adobe and they said they do not "officially" support Spaces and to ask Apple.

    So, has anybody found out a solution to improve the usability of the Creative Suite with spaces?

    DB:2.53:Spaces And Cs4 c3

    How much memory do you have on your system? I use spaces with CS4 all the time. My typical work flow I will have Maya in one space, Final Cut Pro in another space, shake in a third space, After Effects in a 4th space. My typical photo edit sceneario I leave Photoshop and Lightroom in the same space so I can see the library of pic's in the background I am working on. I have 9gb of memory. I can watch the use grow and on a hard days working I typically will reboot once to clear the memory cache and let it start over. If I had 16gb I probably would not have to do that. If I only had 4gb I would probably be hosed with my workflow as I typically sit in the 3-6gb of memory occupied.

    I have not seen an issue with CS4 and spaces. I work a dual monitor system, with my main system 1920x1200 24" Dell and a 1600x1200 21" Dell monitors. I do have a lot of memory and that may be the problem you are having.

  • RELEVANCY SCORE 2.53

    DB:2.53:Imac, Multiple Monitors &Amp; Spaces x8


    I have 2 monitors connected to my new iMac. I arrange various setups using Spaces on all 3 monitors. When the iMac comes out of sleep mode, all of the panels are always pulled into the iMac monitor (e.g. the other monitors are empty) in each Space. How do I get it to stay "as is" after it comes out of sleep mode?

    DB:2.53:Imac, Multiple Monitors &Amp; Spaces x8

    I have 2 monitors connected to my new iMac. I arrange various setups using Spaces on all 3 monitors. When the iMac comes out of sleep mode, all of the panels are always pulled into the iMac monitor (e.g. the other monitors are empty) in each Space. How do I get it to stay "as is" after it comes out of sleep mode?

  • RELEVANCY SCORE 2.53

    DB:2.53:Spaces Balls 7j


    Ok SPACES = Balls really, good concept but terrible execution.

    When i turn off spaces, some apps, particularly textedit and pages still behave as if they are in spaces and documents cannot be viewed, despite "bring all to front" etc, and it requires turning on spaces to access these and manually dragging these documents back into another spaces frame to see them, this is of course totally unproductive and = balls! SO i am forced to use spaces although it ***** because it is such a hassle when this happens otherwise.

    would trashing prefs help?

    anyone else found this a problem?

    DB:2.53:Spaces Balls 7j

    I wrote that message a long time ago.

    Since updating to 10.5.2 I have had very few problems with Spaces and I really like using it. I keep a calendar, e-mail, and Stickies in one space, iChat and Safari in another, and other separate Spaces for Excel, Firefox (running streaming audio), and one for Word.

    I think it will take some experience to get used to this new feature, but so far, it works very well for me.

    When I was first having problems with Spaces in 10.5.1, I disabled Spaces entirely (removing them from the System Preferences Spaces window) and was amazed how cluttered the screen was with all the applications open. Its great to have Spaces working again, although, as you pointed out, some users are still having difficulty with it.

    I hope Apple doesnt do away with Spaces, like they did when they made it so only one of several windows came to focus (to the top layer) since 10.3. But now with Spaces, that isnt a problem because most of my Spaces have only one application running.

  • RELEVANCY SCORE 2.53

    DB:2.53:Spaces Chaos 8m


    Hi,
    I have been reading a lot about the problems with spaces in SL - guess I am one of many. Here is my basic problem: I can switch between spaces with cmd + no, so far so good. I cannot seem to get the spaces icon on my dock at the the bottom of the page (I watched a training video to figure out how to use spaces) and I cannot figure out, how to see all of the spaces at the same time and move apps from one to the other. Anybody know of a vid that could show me - or somewhere with an easy to understand explanation?
    And last question, has anyone found a way yet to stop applications from jumping all over all spaces despite being assigned to only one?
    To me it looks like it might be better to stop using spaces rather than having to work with this rather erratic tool. At the moment it creates more clutter than it is worth.

    DB:2.53:Spaces Chaos 8m

    According to Chris Cox of Adobe forums, apps shouldn't have knowledge of spaces but vice versa, and that makes sense to me. CS5 is written with all Cocoa APIs so OS should handle it's own standard correctly.

    Please read the third post down in following link before raining hellfire on Adobe:
    http://forums.adobe.com/message/3114117

    Until someone from Apple responds, there is only one side of the story. And until then, I'm just another digital age artist trying to earn his dinner despite an atmosphere of political/corporate finger-pointing and half-assed workarounds to make tools function sort of how they are advertised to.

  • RELEVANCY SCORE 2.52

    DB:2.52:Spaces And Two Monitors s9


    I have a 22" screen hooked up to my 24" iMac. I want to set up expose for my different spaces but I want certain apps to be open in all spaces.

    I want mail, tweetie, and my to-do app open all the time on my second monitor and on the main monitor switch between the spaces.

    I don't have any of these apps assigned to a certain space but when I switch the go with whatever one they were opened with. How can I get these apps to stay constant on every space?

    Thanks!
    Reba

    DB:2.52:Spaces And Two Monitors s9

    List the application in the Spaces Preferences panel, and set it to appear in "Every space".

  • RELEVANCY SCORE 2.52

    DB:2.52:Turning Off Spaces 1c


    I use Nisus Writer Pro quite a bit and under Lion find that its splash screen hangs in the middle of the desktop. When I queried them about this glitch, they said it was a phenomenon seen by those who have Spaces activated. I don't use Spaces, never have, never will. But in going to the System Preferences, I notice also that there's no longer an Expose Spaces category to select in order even to check and see if Spaces is turned on. Suddenly I wonder does Spaces even still exist? Or has it been rebranded as something else I need to turn off?

    DB:2.52:Turning Off Spaces 1c

    I've turned off every feature regarding Mission Control in System Prefs, but my full-screen apps are still creating new Spaces. Is there no way to disable this behavior? Thank you.

  • RELEVANCY SCORE 2.52

    DB:2.52:Spaces In Text 71



    Good morning.

    We use CR2008 since a few weeks and suddenly (from one day to another) the phenomenon appeared, that there are in the mid of longer texts spaces appearing. In the datasource SQL Server 2005) there is plain text with no format characters ore anything similar.

    By looking at this it seems, that these spaces are filled in in front of characters wich are not 'simple' letters but german umlauts ore dots or brackets ...

    I hope anyone has an idea to get this back to 'normal' appearance (as it has been).

    DB:2.52:Spaces In Text 71


    Hi Hans-Christian,

    Crystal generates the characters using the font glyphs which depending on the font being used depends on how it is mapped and linked within windows itself. Tahoma seems to be the popular one for Microsoft to map all these extra character sets to. I suggested adding those font options because if they are there, CR seems to work. But this may be an issue with the DB Client not converting them. Some clients have a language setting and they will convert the charaters "on the fly" to the client PC. Sometimes the Server does the conversion. If it is left up to the client to convert and format the character for display purposes then font mapping and what's called the "local codePage" is what CR uses to set the language options when previewing the report.

    The next option is if you use Word there is an option to install internation language fonts and it installs one called "MS Arial Unicode". If you have it try setting the default font for that field to this font and see if that works.

    And one other font selection to be aware of. In the Designer any font that has a "@" in front of it is beacuse this is how CR maps them for 90 degree rotation and they should not be selected when formatting a field. They can cause problems like this also.

    Thanks again

    Don

  • RELEVANCY SCORE 2.51

    DB:2.51:%Rowtype 98


    in pl/sql record data type is not mentioned as varchar2(10) for
    name becoz name may exceed in future. so we r using %type.

    now i want to kn that if we using %type in place of varchar2 then it
    might be taking unexpected spaces.

    becoz in varchar2 we manage the spaces.

    what is concept behind it.

    regards
    ashish

  • RELEVANCY SCORE 2.51

    DB:2.51:Vm Loses Icon Positioning After Local Machine Reboot 9m



    View 4.6, Linked Clones ProfileUnity

    He has two monitors, one is 1680 x 1050, the other 1290 x 1024.

    The VDI is set up for 2 monitors at 1920 x 1200.

    No one else has complained about this (though they may not be moving the icons around that much,)

    Is this related to the differeing resolutions of the physical monitors to the virtual monitors?

    Thanks

    Kyle

    DB:2.51:Vm Loses Icon Positioning After Local Machine Reboot 9m


    I don't use ProfileUnity but it's not something I had complaints about in my environment and I don't remember setting up anything explicitly to handle icon positions. What kind of testing have you done?

  • RELEVANCY SCORE 2.51

    DB:2.51:Dw Cs4 Extra Spaces Between Boxes s8



    I have extra spaces between my container and main content boxes and when I put text in or an image in, it has white space around it like a margin but I have no margin set, no border, no extra spaces entered. Can't get rid of them. Any suggestions?

    DB:2.51:Dw Cs4 Extra Spaces Between Boxes s8


    Great. Ill try that. Thanks!

    Barbara Dabney, Office Manager

    [Private Information Removed]

    Message was edited by: Sudarshan Thiagarajan. Please refrain from posting your e-mail/ phone/ address here as this is a public forum. If you're responding from your mobile/ handheld device, please exclude your auto-signature to your reply.

  • RELEVANCY SCORE 2.51

    DB:2.51:Fusion With Leopard: A Question About Spaces Support 3p


    Hello All!

    I have been using RC 1.1 and I have to say, WOW! I am extremely

    happy with how stable, and fast RC 1.1 has been on Leopard. Great work

    guys!

    I have a question about Fusion and Spaces, or multiple screens for that matter.

    In

    unity mode, if I have multiple programs open, I would like to be able

    to drag some XP windows to different spaces, similar to what I can do

    with OSX windows.

    Currently I can drag the windows to different

    spaces, but when focusing on a window, the focused window re-draws on

    the XP windows in other spaces as well.

    I imagine that the same thing is true when using multiple monitors? but maybe not.

    Is more Unity / Spaces support being worked on at this time? Does anybody else see the value in doing this?

    Thanks, and again, Great work!

    DB:2.51:Fusion With Leopard: A Question About Spaces Support 3p


    If I understand what you're describing, this is similar to what happens if you Expos with overlapping windows. It would not be a problem with multiple monitors, since the windows would not be overlapped in the guest space. There are certainly improvements to be made with Unity; for example, Unity windows will sometimes flicker back and forth between Spaces.

  • RELEVANCY SCORE 2.50

    DB:2.50:Scom Monitors, Rules Running On A Server ka


    Hi Team,

    Getting information like what all monitors/overrides/rules etc running on a specific set of servers has been bit annoying as there is no simple way out.

    is there any improvement in this regard witn SCOM 2012 and SP1.

    Thanks,
    Varun

    DB:2.50:Scom Monitors, Rules Running On A Server ka

    I am not aware of any improvements specifically for this in SCOM 2012. Abdul offers some good solutions, albiet it is not easy to mine this type of data from SCOM - especially for a group of servers.
    There is an add-on product that might help - MP Studio by Silect Software.Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • RELEVANCY SCORE 2.50

    DB:2.50:Phone Still Has No Service kz


    Please advise why my phone still has no service 5 days of this. The list of excuses, promises, time I have wasted. You really have no concept of customer service. Now let's see what excuse , new timeline can you offer today.

    DB:2.50:Phone Still Has No Service kz

    Welcome to the Community @Annoy-ed.As o2 customers we would like to assist but need more information from you.Have you checked the status of your local mast? status.o2.co.uk



    Samsung Galaxy Note 3

  • RELEVANCY SCORE 2.50

    DB:2.50:Spaces Vs. Screen Sets Lp8 3m


    I've been using spaces in Leopard with LP8 instead of screen sets. I'm using a 20in Imac and 20in Cinema Display and 12 spaces. Each space has two monitors in a sense. Space 1:2 Mixer windows scrolled to different positions Space 2: 2 Arrange windows scrolled to different positions. other spaces for plugin windows. Using control and arrow keys it's a breeze to fly around to different spaces. It reminds of the fader banks my Mackie Control but faster.

    DB:2.50:Spaces Vs. Screen Sets Lp8 3m

    I just got a macbook pro (10.5), and tried out Spaces for a few days.
    It seemed to slow things down a little with just a few Spaces working.
    My mouse would seem to not be available for a second or so.
    Enough to feel like I had to wait.
    Do you think this was due to Spaces?
    I liked the idea, but turned it off for the moment.

  • RELEVANCY SCORE 2.50

    DB:2.50:When I Downloaded New Photos, They Showed Up As Grayed Out Areas, Without Any Photo There, Just The Gray Spaces Shown Where A Photo Should Be. pm



    I downloaded a bunch of photos, but instead of them showing in each space, they were all grayed out, NO photos were shown, just blank gray spaces,where each photo should be, this has just started to happen the last month or so.

    DB:2.50:When I Downloaded New Photos, They Showed Up As Grayed Out Areas, Without Any Photo There, Just The Gray Spaces Shown Where A Photo Should Be. pm


    I downloaded a bunch of photos, but instead of them showing in each space, they were all grayed out, NO photos were shown, just blank gray spaces,where each photo should be, this has just started to happen the last month or so.

  • RELEVANCY SCORE 2.50

    DB:2.50:Sample Virus Targets Windows And Linux 1s


    From News.com:

    Sample virus targets Windows and Linux

    "Virus writers have crafted another example of malicious software that can infect computers running Windows or Linux.

    The proof-of-concept was submitted to Russian antivirus company Kaspersky Lab, which calls it Bi.a. The virus was written in low-level computer code called "assembler" and is limited, as it only infects files in the current directory, Kaspersky said Friday on its Web site. However, it can infect files in the different formats used by Linux and Windows--ELF and PE, respectively, Kaspersky said.

    The virus is a classic proof-of-concept, written to show that it's possible to create a cross-platform virus, Kaspersky said. "However, our experience shows that once proof-of-concept code is released, virus writers are usually quick to take the code and adapt it for their own use," Kaspersky said.

    That concern is shared by Swa Frantzen, who tracks incidents at the SANS Internet Storm Center, which monitors network threats. "The impact of the proof-of-concept at this point is very low in itself, but it is a sign the cross-platform aspects are becoming important," Frantzen wrote on the ISC blog. "As the developers of viruses continue to research this, we will see more cross-platform malware come about in the future."

    Kaspersky has added detection for the malicious software to its antivirus databases."



    DB:2.50:Sample Virus Targets Windows And Linux 1s

    From News.com:

    Sample virus targets Windows and Linux

    "Virus writers have crafted another example of malicious software that can infect computers running Windows or Linux.

    The proof-of-concept was submitted to Russian antivirus company Kaspersky Lab, which calls it Bi.a. The virus was written in low-level computer code called "assembler" and is limited, as it only infects files in the current directory, Kaspersky said Friday on its Web site. However, it can infect files in the different formats used by Linux and Windows--ELF and PE, respectively, Kaspersky said.

    The virus is a classic proof-of-concept, written to show that it's possible to create a cross-platform virus, Kaspersky said. "However, our experience shows that once proof-of-concept code is released, virus writers are usually quick to take the code and adapt it for their own use," Kaspersky said.

    That concern is shared by Swa Frantzen, who tracks incidents at the SANS Internet Storm Center, which monitors network threats. "The impact of the proof-of-concept at this point is very low in itself, but it is a sign the cross-platform aspects are becoming important," Frantzen wrote on the ISC blog. "As the developers of viruses continue to research this, we will see more cross-platform malware come about in the future."

    Kaspersky has added detection for the malicious software to its antivirus databases."



  • RELEVANCY SCORE 2.50

    DB:2.50:Tde Tablespaces Joining On Non-Tde Tablespaces k8


    I need to do research and a proof of concept on ASO and the Table spaces TDE and I am not finding a really good set of information on what is important to my clients requirements.

    I am using Oracle 11gR2 and we are implementing ASO and using the TDE Table spaces concept, we will be eventually connecting and/or joining to other Oracle Tables spaces which some are TDE encrypted and some are Not. So what I am trying to find out before I go through the huge hassle of standing up machines to test these processes is are Joins or remote connections to Non-encrypted table spaces a show stopper, meaning its not possible??

    Does anyone have any comments or direction towards Documentation or papers that discuss this and show positive or negative compatibility?

    thank you in advance for any and all positive comments.

    DB:2.50:Tde Tablespaces Joining On Non-Tde Tablespaces k8

    Thank you Justin,
    I agree not every question can be answered in Documentation, but you were helpful for me and hopefully this answer will help others in the future too.

  • RELEVANCY SCORE 2.50

    DB:2.50:Os X Spaces With 2 Monitors ad


    I have just got into using Spaces on 10.6.7 and think its great way of setting up screensHowever I have just connected a 2nd DVI Monitor, and see that Spaces has now detected my 4 "spaces' with the 2nd Monitor attached so they are like 'double squares' for each of my 4 Spaces showing my MBP screen and Monitor together.This is all fine, but i was thinking, is it possible to copy some of the programs I have open to other spaces so i can launch different combinations of spaces/screensets?For exampleSpace 1 = X + YSpace 2 = X + ZSpace 3 = Z + W etcSo different spaces have different combinations of the same programs, so they launch together?I can't seem to find a way to 'copy' the same program but to different screens?

    DB:2.50:Os X Spaces With 2 Monitors ad

    I have just got into using Spaces on 10.6.7 and think its great way of setting up screensHowever I have just connected a 2nd DVI Monitor, and see that Spaces has now detected my 4 "spaces' with the 2nd Monitor attached so they are like 'double squares' for each of my 4 Spaces showing my MBP screen and Monitor together.This is all fine, but i was thinking, is it possible to copy some of the programs I have open to other spaces so i can launch different combinations of spaces/screensets?For exampleSpace 1 = X + YSpace 2 = X + ZSpace 3 = Z + W etcSo different spaces have different combinations of the same programs, so they launch together?I can't seem to find a way to 'copy' the same program but to different screens?

  • RELEVANCY SCORE 2.49

    DB:2.49:Bulk Loading A File With Unknown Multiple Spaces m8



    I have a file that has an unknow amount of spaces between each column and i'm trying to load it with bulk insert with no success.
    BULK INSERTMyTable
    FROM 'myfile.txt'
    WITH
    (
    FIELDTERMINATOR = ' ',
    ROWTERMINATOR = '\n'
    )

    this fails and i think it's because of the FIELDTERMINATOR
    How do i do this correctly?

    thanks,
    Dror

    DB:2.49:Bulk Loading A File With Unknown Multiple Spaces m8

    Ok, one workaround would be replace the spaces with comma(,) or pipe(|) character. Make sure, before you run the query the number of columns in your file must match with your table.
    For example:
    myfile.txt
    ----------
    1x xxxx
    xxxxxxx
    2 xxxxx
    xxxxxxxxxxxx
    after replacing spaces with (,) myfile.txt
    1,xxxx,xxxxxxx
    2,x,xxxx,xxxxxxxxxxxx
    after completion, you can perform BULK INSERT statement on that file, like:
    BULK INSERT MyTable FROM 'Myfile.txt' WITH(FEILDTERMINATOR=',', ROWTERMINATOR='\n');Kiran (www.ggktech.com)

  • RELEVANCY SCORE 2.49

    DB:2.49:Need To Generate Report On Selected Monitors. 9x



    Hi Community,

    Need your help.

    I am trying to generate report on selected Monitors of different remote agents.

    e.g- There are 10 remote agents having different types of monitors.

    I want to generate report so that I will get information related to only Ping Monitors from these 10 remote Agents.

    I tried with PW command, PW monitor list -a Remote Agent host name OR IP but I got information of all monitors instead of getting information of Ping Monitors only.

    Also when I use above command I facing one issue (No agent has name:Agent name) but agent is present in list of Remote Agent of admin console.

    So please help me so that,

    1)I will get information of only monitors that I want instead of getting information of all monitors.

    2)I will get solution of above issue mention in bold letters.

    Regards,

    Rahul.

    DB:2.49:Need To Generate Report On Selected Monitors. 9x


    Hi Community,

    Need your help.

    I am trying to generate report on selected Monitors of different remote agents.

    e.g- There are 10 remote agents having different types of monitors.

    I want to generate report so that I will get information related to only Ping Monitors from these 10 remote Agents.

    I tried with PW command, PW monitor list -a Remote Agent host name OR IP but I got information of all monitors instead of getting information of Ping Monitors only.

    Also when I use above command I facing one issue (No agent has name:Agent name) but agent is present in list of Remote Agent of admin console.

    So please help me so that,

    1)I will get information of only monitors that I want instead of getting information of all monitors.

    2)I will get solution of above issue mention in bold letters.

    Regards,

    Rahul.

  • RELEVANCY SCORE 2.49

    DB:2.49:Rwclient Issue When Passing Parameters With Spaces j1


    AS 10.2.0.2 on Sun Solaris 10. We have reports that are scheduled and sum of the parameters have spaces in the value. For example parm1=I am with spaces. We would then generate a command line that shows the parameter like rwclient.sh server=rep_serv report=report1 parm1=I am with spaces. This errors with numerous messages. I tried surrounding the value in single quotes like this rwclient.sh server=rep_serv report=report1 parm1='I am with spaces'. When running the quoted command the report server shows the parameter as parm1='I' am with spaces. We have the parameter page of the report as the first page which allows us to see what was actually used as parameters. Of course the data in the database has no value that matches with the single quotes so no data. I need to be able to pass a value with spaces and it actually show as a parameter with spaces. We do not have this issue when we can run with forms built-ins as you actually build a parameter list to pass. Thanks in advance.

    Edited by: gdaustin1 on Jan 26, 2012 8:03 AM

    DB:2.49:Rwclient Issue When Passing Parameters With Spaces j1

    What I ended up doing was to dynamically create a command file with the parameters and call the command file when initiating rwclient. Seems to work so i am considering this closed and thank everyone for giving me suggestions.

  • RELEVANCY SCORE 2.49

    DB:2.49:Dual Monitors Dvi To Vga ck



    I have two new VGA monitors. My HP Pavilion has two DVI ports. Using 2 DVI to VGA adapters the pc is only seeing one of the monitors. The other displays "no signal". Reading other posts, I see that DVI-D won't convert to VGA but one of my DVI ports is working fine.

    DB:2.49:Dual Monitors Dvi To Vga ck


    The answer is that I have one DVI-I and one DVI-D. The pin comnfiguration is that of the DVI-I connection pictured but apparently color matters. In any case, the solutin was to return the VGA monitors and for $10 each purchase monitor with both VGA and DVI connections.

  • RELEVANCY SCORE 2.49

    DB:2.49:Move Spaces To Low Values dx



    Hi,

    My code has to read a IMS database and has to generate an extract file for that upon certain validation.

    Move Spaces to Low valuesOn which one of the field has low-values by default when there is no value to populate, in such case I have to replace them to spaces before I output to the extract file, other than that the actual value has to go for the extract.[/b]

    I seek solution for my above requirement from experts.

    Thanks in Advance,

    DB:2.49:Move Spaces To Low Values dx


    As I said in different post that I haven't read any books on SAS and not trained I work with what exists already in the system.

    I found the answer using Re: Move Spaces to Low valuesRANK[/b] function, thank you for taking time to provide me a solution.

  • RELEVANCY SCORE 2.49

    DB:2.49:Spaces Not Displaying For Members fm


    For some of our users the spaces they are members of no longer appears on the spaces page on the home space or in the spaces list. This is also occuring for newly invited (non-spaces users). No changes to our production environment in he last six months except a security certificate update.

    Anyone seen this before?

    DB:2.49:Spaces Not Displaying For Members fm

    Could it be that those spaces are public?

  • RELEVANCY SCORE 2.49

    DB:2.49:Its Annoying Please Help mp


    In short 2 monitors are hooked up same brand same size same res. Issue is when I swipe right say to a second desktop where i have stuff at on monitor 1 it changes on monitor 2 also. I never had this issue before.For instance if i have a web page open on monitor 2 and need something from swiping it changes both monitors. The second issue to this in setting of the dock is if a check is put in the last box for monitors has seperate spaces then if i full screen on monitor 2 the stupid menu bar stays on top of everything and the dock at the bottom wont appear. Any one have any idea how to fix thisThanksTom

    DB:2.49:Its Annoying Please Help mp

    In short 2 monitors are hooked up same brand same size same res. Issue is when I swipe right say to a second desktop where i have stuff at on monitor 1 it changes on monitor 2 also. I never had this issue before.For instance if i have a web page open on monitor 2 and need something from swiping it changes both monitors. The second issue to this in setting of the dock is if a check is put in the last box for monitors has seperate spaces then if i full screen on monitor 2 the stupid menu bar stays on top of everything and the dock at the bottom wont appear. Any one have any idea how to fix thisThanksTom

  • RELEVANCY SCORE 2.49

    DB:2.49:Question About Hp 2509m And Hdmi Support. Is It Compatible With The Hdmi 1.3 Certification? z1



    Basically, I cannot find any information as to what level of compliance the HP 2509m has with the HDMI standard. I have HDMI 1.3 specified cables, and I have both an HD Radeon 5870 video adapter and a PS3, all of which conform to the HDMI 1.3 standard, the pertinent portion of the standard to this question being the ability to transfer Deep Color system color spaces.

    For example, 32 bit True Color offers16,777,216 color possibilities per pixel with an alpha channel for varying transparency for opaque to transparent objects, whereas all of the previous HDMI1.3 compliant equipment I mentioned has the capability to produce and transfer at least 36 bit Deep Color system color spaces, which offer 68.71 billion color possibilities per pixel with an alpha channel for varying transparency for opaque to transparent objects.

    What I don't know and cannot seem to find is to what standard of HDMI the HP2509m conforms. I own the monitor, and I would like to test out the Deep Color capabilites of my video adapter and PS3 with my monitor rather than my television, but I do not know if the monitor meets the specifications.

    Can anyone here confirm what level of HDMI compliance this monitor has and, if they do know, how or where they found that information? If no one knows, can anyone direct me to whom from which I might request this information?

    Thank you.

  • RELEVANCY SCORE 2.49

    DB:2.49:Windows Live Mail - Issue On Copy Paste - It Removes Text And Tab Spaces kk


    ==================================================== On Windows Live Mail (with Rich Text/HTML format), I am using to access my POP accounts, till last month it was working fine....now it has a problem : -----------------------------------------------------
    - When I copy any text from mail (within Windows Live Mail) & paste it to another new email (in the same client), it removes all text spaces & tab spaces. ----------------------------------------------------- - While if I copy any text from outlook & paste
    in Windows Live mail program, it shows correct with text spaces & tab spaces. - But again if I copy the same text from Windows Live Mail program & create a new email message, then paste there...it again removes all those text spaces & tab spaces. -----------------------------------------------------
    - however there is no such issue in outlook , or other program like word, text etc... those are showing the same text spaces & tab spaces, when I copy paste within those program, this issue is happening ONLY in Windows Live Mail program. -----------------------------------------------------
    I have not changed any settings since last month, it was working fine until last week end, since last weekend this issue is happening & ONLY in Windows Live Mail program. ----------------------------------------------------- Here are the screen shots of this
    issue. ----------------------------------------------------- http://tinypic.com/r/xprmg6/7 [IMG]http://i51.tinypic.com/xprmg6.jpg[/IMG] http://i51.tinypic.com/xprmg6.jpg ====================================================

    DB:2.49:Windows Live Mail - Issue On Copy Paste - It Removes Text And Tab Spaces kk

    I've been having the same issue. Your work-around has worked. I removed IE altogether, since I do not use it anyway. Hopefully MS realizes this bug soon and fixes it.

  • RELEVANCY SCORE 2.49

    DB:2.49:View Users With Multiple Monitors? 8x



    Do anyone know of customers using VIEW with multiple monitors? A bank has asked us if there are customers using VIEW with 4 monitors?

    //JOhnny

    DB:2.49:View Users With Multiple Monitors? 8x


    Did you ever have any bank-traders using view?

    Johnny

  • RELEVANCY SCORE 2.49

    DB:2.49:Saving Attachments c7


    When trying to save an attachment received via email using Outlook Web App and the name of the document has spaces, special characters are being inserted in the spaces, if there are no spaces a [1] is being put at the end of the file name.

    This happens no matter what kind of document it is .xls, .xlsx, .doc, .docx or .pdf.

    DB:2.49:Saving Attachments c7

    Hi ,
    I have some questions need to confirm.
    What version the Exchange Server ?
    Do you installed Exchange the latest update ?
    What happens on other users and what happens on other IE version ?

    Wendy Liu
    TechNet Community Support

  • RELEVANCY SCORE 2.49

    DB:2.49:The Master Frame Has No Spaces After It's Items dx


    Hi

    i have master Frame with it's own items stand aside from any frames.
    Below it Detail Frame with it's own items.

    The problem is:
    ---------------------
    There is now spaces below the Master Frame items just on the edge of it's items .
    The Master Frame is shrinked although in the design time there is enough spaces but run time on the screen or on the print priviewer there isn't any spaces displayed.

    Pls tell me How to handel this problem.

    --------------------------------------------------------

    Regards,

    Abdetu..

    DB:2.49:The Master Frame Has No Spaces After It's Items dx

    The Vertical Elasticity property for your main repeating frame will be Expand or Variable,
    so design time space will not matter.
    You can set the Vert. Space Between Frames as desired.

    Hope this helps.

    Regards

    Arif

  • RELEVANCY SCORE 2.48

    DB:2.48:Poor Quality Video Output On 410 z9



    I have 3 Precision 410 workstations that are currently producing very poor quality video output. The display is dulled and displaying shadows. Also, there are horizontal or diagonal lines spaces approximately 2 inches apart from each other going across the screen.

    I have swapped monitors and video cards with no success. The machines are not located within the same area nor is there any other equipment in the area that could be distorting the video quality.

    Has anyone else experienced or solved this problem? What can I do? Thank you!!!

    DB:2.48:Poor Quality Video Output On 410 z9


    I have 3 Precision 410 workstations that are currently producing very poor quality video output. The display is dulled and displaying shadows. Also, there are horizontal or diagonal lines spaces approximately 2 inches apart from each other going across the screen.

    I have swapped monitors and video cards with no success. The machines are not located within the same area nor is there any other equipment in the area that could be distorting the video quality.

    Has anyone else experienced or solved this problem? What can I do? Thank you!!!

  • RELEVANCY SCORE 2.48

    DB:2.48:Unable To Distribute Document To A Shared Path That Contain Spaces z7



    Dear Gurus,

    I have tried to distribute one of our qvw to shared path as follows "\\selud3\cpdp 2014".

    Since the above path contains spaces, my task has failed. Same task is being succesful If I publish to the following path with no spaces \\selud3\cpdp2013 .

    I tried to put single quotes and double quotes.still my task is failed to distribute.

    Please help me.

    Regards,

    Venkat

    DB:2.48:Unable To Distribute Document To A Shared Path That Contain Spaces z7


    Hi Venkat,

    Close this discussion by giving Correct Helpful answers to the useful posts, so that it would be helpful for others.

    Regards,

    Jagan.

  • RELEVANCY SCORE 2.48

    DB:2.48:The Elitists Concept jj



    Elitist

    e·lit·ist
    /iˈlētist/NounA person who believes that a system or society should be ruled or dominated by an elite.AdjectiveFavoring, advocating, or restricted to an elite.
    I see an "elitest" as being people who have specific knowledge about home and when asked to share has the attitude of " if you don't know well i'm certainly not going to tell you." Glitchers would be an excellent example of this. I agree that people who are able to see certain spaces and aquire certain items can be "elitest" also. These people will run around Home saying " haha, i got to see this and obtain that and there is no way i'm going to tell you how to do it." You see alot of them on home who give the new users a hard time.

    What people need to realize is we act like this in everyday life.It will never CHANGE.




    Batman Rockabill y

    DB:2.48:The Elitists Concept jj


    That lastphrase always reminds me of this:

    Dorothy Parker, When asked to use the word "horticulture" correctly in a sentence US author, humorist, poet, wit (1893 - 1967)

    You can lead a ***** to culture, but you can't make her think.




    Sir Piglet - The best of British porkPoetry in Motion

  • RELEVANCY SCORE 2.48

    DB:2.48:Pre/Post Install Scripts kj



    Thought might be helpfulto whoever has a pre or post install scripts as part of the intaller: make sure there are no spaces in the script name...

    DB:2.48:Pre/Post Install Scripts kj


    Never noticed that, it fails with a space in the name I assume?Also, be sure you only supply an exe or BAT file (VBS will not work).

  • RELEVANCY SCORE 2.48

    DB:2.48:Exchange Rate File Format Rftbff00 pz



    Hi all

    i have been trying to upload exchange rates via RFTBFF00 and have not been successful with the file format. The documentation for program RFTBFF00 lists the file input format, however, it does not specify the type of file allowed and clearly expalin whether to fill spaces etc.

    I have been using a csv file type and tested a variety of methods of both filling blank spaces for empty fields and empty spaces or leaving blanks altogether for non required fields and no method has worked.

    Does anyone have an example of a file i could use to test the upload?

    DB:2.48:Exchange Rate File Format Rftbff00 pz


    Hello,

    Please use the below tab delemeted sample file format.. Hope this helps.

    01AED USD M 110120062200060.27227 1 1

    01ARS USD M 110120062200060.32787 AED 1 1

    01AUD USD M 110120062200060.75490 ARS 1 1

    01BGN USD M 110120062200060.62016 AUD 1 1

    01BOB USD M 110120062200060.12579 BGN 1 1

    01BRL USD M 110120062200060.43883 BOB 1 1

    01CAD USD M 110120062200060.86304 BRL 1 1

    01CHF USD M 110120062200060.78401 CAD 1 1

    01CLP USD M 110120062200060.00191 CHF 1 1

    01CNY USD M 110120062200060.12398 CLP 1 1

    01COP USD M 110120062200060.00044 CNY 1 1

    01CRC USD M 110120062200060.00201 COP 1 1

  • RELEVANCY SCORE 2.48

    DB:2.48:Counting Words,Characters With Spaces And With No Spaces, Lines And Pages In Richtextbox C#? d8


    Ho w to count words, characters(with spaces and with no spaces), lines, and pages of richtextbox? Please help....

    DB:2.48:Counting Words,Characters With Spaces And With No Spaces, Lines And Pages In Richtextbox C#? d8

    The following code will count words, characters, non-blank characters, lines and pages.
    char[] delimiters = ( Environment.NewLine).ToCharArray();
    int words = RichTextBox1.Text.Split(delimiters, StringSplitOptions.RemoveEmptyEntries).Length;

    int allChars = RichTextBox1.Text.Count();
    int visibleChars = allChars - (
    from c in RichTextBox1.Text
    where Environment.NewLine.Contains(c)
    select c).Count();
    int nonBlankChars = visibleChars - (
    from c in RichTextBox1.Text
    where c == ' '
    select c).Count();

    int lines = RichTextBox1.Lines.Count;
    int linesPerPage = 60; //Or whatever you think it should be
    int pages = Convert.ToInt32(Math.Ceiling(lines / (double)linesPerPage));

    There are a few things you should keep in mind:

    There may be NewLine characters but no blanks between words.When a line of text wraps because it is too wide for the RichTextBox, it is still counted as one line.A RichTextBox doesn't have pages, so I simply calculated pages from an assumed number of lines per page.

  • RELEVANCY SCORE 2.48

    DB:2.48:Spaces In Report Output ks


    Hi,

    I try to run the report it creates lots of spaces in between them.

    for example if there are 4 out of 10 activities satisfies my condition. Soon in the ootput report it generates 4 pages. Out of this first 2 are blank and rest of three has no data on it.

    please help me here.

    Regards,
    Siva Sankar

    DB:2.48:Spaces In Report Output ks

    The template is having lot of carriage returns in it.
    You must have written all condition by pressing enter character.

    if you have used, if statement.
    Change it to
    ?if@inlines:YOURCONDITION?But, ultimately,without seeing the template we cannot correct the blank page,

    drop me the template and xml to my id in profile.

  • RELEVANCY SCORE 2.48

    DB:2.48:Spaces On Right Aligned Text sp



    Our users are trying to use spaces as padding for right aligned text but it isn't working.

    I did a test with the same text in two different right aligned text holders, the second container contains the text that was in the first container as well as several non-breaking spaces at the end. When I debug the results of StringTextLineFactory.createTextLines the widths of both text lines were the same.

    This seems like it is a FTE issue since FTE has no concept of right aligned text I could see it just dropping off extra spaces at the end of the text but that is just a guess.

    It also looks like RichEditableText does the same thing. In this video i enter "asdf" then a bunch of spaces and it isn't until I enter another character that the space characters are recognized. http://screencast.com/t/NGMzZmNk

    DB:2.48:Spaces On Right Aligned Text sp


    We do have a control for using paddingEndIndent but users will be users and they wanted to use spaces. I didn't realize that this functions the same way as the major text engines.

    Thanks for the clarification.

  • RELEVANCY SCORE 2.48

    DB:2.48:Applescript Help pp


    I need help writing a simple applescript.

    Basically, I want ALL windows for an application (in this case, lets say "Safari") to be moved to top left corner of the screen (0,0) so I can see/access them. For whatever reason, some windows have been positioned off screen and out of view.

    This app is tricky, it has many windows, not all of which are visible. I need a script that will reposition ALL windows to 0,0. regardless of displays, spaces, etc...

    (I have tried all other options: spaces, detect display, gather windows, disconnecting monitors, reconnecting monitors and repositioning windows etc, etc, etc.)

    any help would be much appreciated.

    DB:2.48:Applescript Help pp

    You might also try this:

    *tell application "System Events" to tell windows of process "Safari" to set position to {0, 0}* -- {0,22} actually

  • RELEVANCY SCORE 2.48

    DB:2.48:Why No Spaces In Role Names? Specific Issues To Expect... 71



    Does anyone know the reason spaces / caps aren't supported in the names of roles? Is it that it causes specific issues later on when the roles are used? As far as I can tell, this is the only table that has this issue.Is there any specific information available on the types of issues that having a space in the role name causes?Thanks in advance,Adam

    DB:2.48:Why No Spaces In Role Names? Specific Issues To Expect... 71


    And just to be on the safe side, I would prefix any new roles you create with a "u_" to denote a customer specific role in case SN creates a new one with the same name. Plus, it follows the naming scheme of new fields and tables.

  • RELEVANCY SCORE 2.47

    DB:2.47:Hulu Desktop App &Amp; Lion: Full Screen Problems sd


    Hi there.I just installed Lion and am having a major problem.I use Hulu desktop has my primary TV source. I have a MacBook pro and attach my LCD TV via the display port as an additional monitor. I use the Hulu app on the TV monitor. Normally I use it in full screen.The problem is, I can't use any other fullscreen apps at the same time (on the primary monitor) because Spaces (or whatever the Lion name for it would be) switches screens on BOTH monitors no matter what I do.I should be able to choose something to make the Hulu app work in ALL spaces (I know it was possible in Snow Leopard). I believe that would fix my problem if there is away.Anyone have any ideas?

    DB:2.47:Hulu Desktop App &Amp; Lion: Full Screen Problems sd

    Hi there.I just installed Lion and am having a major problem.I use Hulu desktop has my primary TV source. I have a MacBook pro and attach my LCD TV via the display port as an additional monitor. I use the Hulu app on the TV monitor. Normally I use it in full screen.The problem is, I can't use any other fullscreen apps at the same time (on the primary monitor) because Spaces (or whatever the Lion name for it would be) switches screens on BOTH monitors no matter what I do.I should be able to choose something to make the Hulu app work in ALL spaces (I know it was possible in Snow Leopard). I believe that would fix my problem if there is away.Anyone have any ideas?

  • RELEVANCY SCORE 2.47

    DB:2.47:Need Help za


    Guys, i've just started learnin Oracle at school. I'm not able to understand the concept of Table Spaces.
    How can u relate table space with SQL Serever

    DB:2.47:Need Help za

    BLOCKQUOTEfont size="1" face="Verdana, Arial"quote:/fontHROriginally posted by Manoj Annyarumbhatla (sunnyboy010@hotmail.com):
    Guys, i've just started learnin Oracle at school. I'm not able to understand the concept of Table Spaces.
    How can u relate table space with SQL SereverHR/BLOCKQUOTE

    --------------------------------------

    Hi:

    Sorry but I think you need to learn very very basic concept of database, database server and client, and then the product of Oracle such as Oracle 8i Server and its architecture.
    null

  • RELEVANCY SCORE 2.47

    DB:2.47:Trailing Spaces Not Getting Retained For Receiver Fcc cf



    Hi,

    We are developing a proxy to receiver FCC(Fixed length) scenario in which the last field of the target structure is 10 spaces. I have hardcoded 10 spaces in PI, but when the fixed length file is created in app directory(al11 transaction), the last 10 spaces are trimmed. I tried downloading the file to my desktop, but no luck. Apart from that, the spaces inbetween are retained

    My FCC parameters configured are

    Record.fieldFixedLengths = lengths of the fields

    Record.fieldNames = names of the fields

    Record.endSeparator = 'nl'

    Record.fixedLengthTooShortHandling = ignore

    Do we have a way around using FCC apart from Java or xslt mapping.

    If any one has faced similar issue, please share your inputs.

    Regards,

    Deepika

    DB:2.47:Trailing Spaces Not Getting Retained For Receiver Fcc cf


    Hi Deepika,

    We faced similar issues.

    When we tried to download the file from AL11 transaction the file doesnt shows the last appended blank characters.

    But if you will physically check in the location u will find the values present.

    You can contact basis guy to get the files from the location..

    thanks and regards,

    Praveen T

  • RELEVANCY SCORE 2.47

    DB:2.47:Display Artifacts On Mbpr Multi-Monitor Setup (+Solution) xp


    Hey everyone, I'm fortunate enough to have access to 3 MBPr in 3 different environments. I've confirmed that this bug is present on all MBPrs: How to replicate: - 2 1080p or higher monitors, one using a DVI - DisplayPort adapter and the other using HDMI or HDMI - DisplayPort (It doesn't matter)- 2 external monitors arranged so that they are "Above" the internal display and the internal display is centered, below both monitors (I'm talking about the Displays Arrangement tool, not necessarily physically, FYI) - Move your title bar so that the RIGHT external monitor has the menu bar. - Your MBPr is setup to Scaled, "More Space" (1920x1200) With this exact setup, you have now introduced display artifacts at the bottom of your retina display. Specifically near the bottom left. You can replicate this every time if you use mission control to display all spaces. (Swipe up with three fingers on trackpad). The severeity of the artifacts changes from MBPr to MBPr and depending on how centered your retina display is. I believe this is a spaces / geometry bug when using scaling. To work around this issue, simply move your menu bar to the LEFT monitor, or keep it on the internal display. You can also re-arrange the displays to make this go away. But I find having the menu on the left is the least impactful work around. Can anyone confirm what I'm posting here?

    DB:2.47:Display Artifacts On Mbpr Multi-Monitor Setup (+Solution) xp

    Great information. I can confirm that fixes the problem... But unfortunately it isn't ideal, since my MBPr is below my two external monitors. I'd rather have the menu bar on one of the two monitors...Sadly this issue is still present on OSX Mavericks. But since it has menu bars on every monitor, I might be able to get away with making the MBPr the primary monitor... Will test to confirm.

  • RELEVANCY SCORE 2.47

    DB:2.47:Hdmi Adapter cm



    What kind of adapter do I need to connect my HP P7-1534 which has no HDMI port to my Vizio HDTV? Thanks

    DB:2.47:Hdmi Adapter cm


    I am trying to connect my HP 7P-1534 to a Vizio HDTV and as suggested I have purchased the Cable Matters SuperSpeed USB 3.0 to HDMI/DVI Adapter but when I put in the CD that comes with it and checked compatibilty a message came up that I need 1.36 MB on driver to copy these files. How do I accomplish this? Thank you.

  • RELEVANCY SCORE 2.47

    DB:2.47:Smashing Cubicles - New Office Workspace Designed For Mobile Workers. What Do You Think? 8d



    This article (from "technology review" site) ended up in my inbox and I thought I'd share because it talks about mobile collaboration workspaces. It's a different concept for mobile workers, moving beyond the traditional cubicle. Lots of interesting comments posted and you'll see that the vendor has responded as well.

    What do you think?

    My 2 cents: I personally think there is a time and place for everything. This arrangement sounds like a great augmentation to private spaces, but not a replacement.

    Laura Douglas

    Community Manager

    DB:2.47:Smashing Cubicles - New Office Workspace Designed For Mobile Workers. What Do You Think? 8d


    Interesting title ... especially as I am sitting in a cubicle now. But it is true that the traditional workspace is diminishing and has moved from our laps to our palms as the development of smartphones continues. It won't be long before we are all working from home and assisting customers from an armchair.

  • RELEVANCY SCORE 2.47

    DB:2.47:Has Anyone Gotten The Dynadock 3 To Work With External Monitors? j1


    On a Surface Pro with 8.1, it sees all of the dynadock assets (USB, sound, etc) but no monitors - anyone else?

    DB:2.47:Has Anyone Gotten The Dynadock 3 To Work With External Monitors? j1

    Please contact Dynadock 3 support to get more assistance.Niki Han
    TechNet Community Support

  • RELEVANCY SCORE 2.47

    DB:2.47:Report Problem With To Many Spaces! ca



    Hi all,

    I am on the way to change some reports with the design and the following problem has shown up:

    Like you can see there are different amount of spaces between the numbers and the caracters. The letter typ is ARIAL with size 10. There are no adidional spaces made by myself. All should have the same distance like number 31, 35.

    Does someone have an idea how to solf the problem?

    Thanks

    Matthias

    DB:2.47:Report Problem With To Many Spaces! ca


    Thanks Marc, your idea was the solution. I created a new paragraph format template. now it is working.

  • RELEVANCY SCORE 2.47

    DB:2.47:Zr2440w Firmware pm



    I have 5 HPZR2440w monitors. 4 of them have LIMM03 firmware and 1 of them has LIMM04 firmware. The monitor with the LIMM04 firmware has no issues being used by several different devices that output a DVI signal (FPGA boards, laptops, etc.). in any display mode. But, ALL 4 of the other monitors with the LIMM03 firmware do NOT work with these devices in all display modes. Typically, anything that is 59.9Hz works fine and any other vertical frequency (60.00Hz even) does not work.

    So, how can I upgrade the firmware on these monitors?

    DB:2.47:Zr2440w Firmware pm


    I am talking about a MONITOR here, not a PRINTER. There is a big difference between the two.

    There is apparently different firmware available, so there must be a firmware update path somehow...

  • RELEVANCY SCORE 2.47

    DB:2.47:Counting Number Of Lines In A Csv File But Without Counting Whitespace Or Newline Feed? 7f


    Hi,
    I have a csv file but the records (seperated by comma) has spaces. For eg:::
    ,1113 Riders Club Road

    ,

    Due to these space when I try to read the no. of lines throug get-content, it count these spaces as well and my result is more than that is expected. Please help me in counting the actualno. of lines ignoring these spaces. Let me know if you need more
    information
    Thanks

  • RELEVANCY SCORE 2.47

    DB:2.47:Spaces In Foreign-Key Constraint Names Throw Errors From Ssdl File 7a


     
    Processing tables with column names that have spaces replaces spaces with underscores. However, there's no similar replacement for FK constraint names.
     
    The Northwind.sdf file that ships with VS 2008 and installs to \Program Files\Microsoft SQL Server Compact Edition\v3.5\Samples has two FK constraints named Order DetailsFK00 and Order DetailsFK01. These two culprits throw a total of 22 compile errors for the SSDL file.
     
    Needs fixing before RTM, I think.
     
    For more details and a fixed Northwind.sdf file, see Upgraded Northwind.sdf File for SSCE v3.5 Available for Download,
     
    --rj
     

    DB:2.47:Spaces In Foreign-Key Constraint Names Throw Errors From Ssdl File 7a

    SP1 appears to eliminate the ghost errors with spaces in FKConstraint names and I haven't been able to repro the 27 ghost errors problem with SQL Server Express Northwind instances today. My blog post is edited to reflect this.
     
    --rj
     
     

  • RELEVANCY SCORE 2.47

    DB:2.47:Renaming Bug - Aperture Adding Unwanted Spaces s7


    Aperture has started doing something strange...Seems only after the 1.1.1 update.

    I always rename files on import, usually with a custom title and a sequence number or index number.

    But, Aperture has started adding spaces between the custom name and the sequence/index number. And, the number of spaces it adds is growing!

    It started off adding 1 space, then two and now three. I just imported 12 photos, and told it to name them "Moon_01", "Moon_02" etc etc. But, it has named them "Moon_ 01" "Moon_ 02" etc etc. I can't get rid of the spaces unless I do it manually for each file. This is a real pain, as spaces and URLs don't play well together, so I can't export the files with the version names because it stuffs up the URLs when they get onto a website. When I look at the naming format under the "edit" option of the rename function, there are no spaces. It doesn't matter if I rename on import or batch-rename later, it always adds the spaces.

    Has anyone else come across this, and maybe have a solution?

    DB:2.47:Renaming Bug - Aperture Adding Unwanted Spaces s7

    That explains why you had spaces but doesn't explain why they were "growing" from use to use. Were you resetting the counter or changing the custom name field between uses?

    The extra space also got me once or twice. It seems like a user interaction issue that is confusing many users. I suggest you report your experience to Apple. They may want to change the programs behavior of separating fields by an automatic space.

  • RELEVANCY SCORE 2.47

    DB:2.47:Xi Team Developing New Home Spaces 77



    i've posted this here instead of the Xi forumscausethese new spaces has nothing to do with Xi can't wait to see what there are

    http://www.thesixthaxis.com/2009/08/01/xi-team-dev​eloping-new-home-spaces/




    DB:2.47:Xi Team Developing New Home Spaces 77

    Hasn't anyone else picked up on the implication of all this: no Xi sequel, in spite of apparently solid indications that there would be one?



    "Silly billy" - nerdlegendThis is me...only on Twitter

  • RELEVANCY SCORE 2.47

    DB:2.47:Tutorials, Videos And Demos On Spaces Functionality ma


    Has anyone found any good Tutorials, Videos and Demos on Spaces Functionality? Like Using the Wiki and Blogs and the other uses of spaces?

    I loved to fine a "WOW look what spaces can do" Video.

    DB:2.47:Tutorials, Videos And Demos On Spaces Functionality ma

    As for tutorials, check http://docs.oracle.com/cd/E21764_01/webcenter.htm (there is one for Spaces users)

    As for videos, there are quite a few videos available on YouTube http://www.youtube.com/results?search_query=webcenter+spacesoq=webcenter+spacesgs_l=youtube.3..0j0i5.1353.3846.0.4059.16.9.0.0.0.0.583.1753.2j3j0j2j0j1.8.0...0.0...1ac.1.GrKsnCAdIJw

    Check also http://download.oracle.com/otndocs/tech/webcenter/files/11gspacesdemo_viewlet_swf.html

    As for demos, there used to be a VM on PS3 - unfortunately, it's no longer available (we are at PS5). Check this link for updates: http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/owcs-portalfw-vbox-284132.html

  • RELEVANCY SCORE 2.46

    DB:2.46:3 Monitors On Xps 8700 Desktop? sf



    How can I setup 3 monitors on my new XPS 8700 Desktop?

    The monitors are HP LP1965 19 LCD All three monitors have 2 VGA in, but no DVI.

    You can see the specs of the 3 monitors at www.amazon.com/.../ref=oh_aui_detailpage_o07_s00;psc=1

    The 8700 has an NVIDIA GeForce GTX 745. There is one VGA, one DVI, and 2 HDMI outputs on the back of the 8700.

    I am not savvy with connecting multiple monitors and I appreciate your step by step help! PS My goal is to have 3 monitors in Portrait orientation, whichHP LP1965 pivots and supports.

    David

    DB:2.46:3 Monitors On Xps 8700 Desktop? sf


    * Turn the XPS 8700 off
    * Turn Monitor 1 off
    * Connect this way =
    XPS 8700 GeForce GTX 745 DVI out -- DVI to DVI cable -- Monitor 1 DVI in
    * Turn Monitor 1 on
    * Turn the XPS 8700 on
    * Once into Windows, click Start- Shutdown- Shutdown- Ok
    * Connect Monitor 2 and Monitor 3 in this way =
    XPS 8700 GeForce GTX 745 HDMI out -- HDMI to DVI cable -- Monitor 2 DVI in
    XPS 8700 GeForce GTX 745 DP out -- DP to DVI cable -- Monitor 3 DVI in
    * Turn Monitor 2 on
    * Turn Monitor 3 on
    * Turn the XPS 8700 on
    * Go into the Nvidia Control Panel and enable Monitor 2 and Monitor 3 as Extended

  • RELEVANCY SCORE 2.46

    DB:2.46:Problems With Multiple Monitors And Unity 1d



    Hi all,

    I'm having some problems with Unity on my multiple-monitor setup and hope someone here has some magic for me.

    My setup:
    Late-2013 Macbook Pro 15 with Retina Display with Mavericks2x Dell 24" external monitors, connected via thunderbolt-to-DVIVMWare Fusion 6.0.2Windows 7 VM

    The problem:

    When I enable Unity, all the windows bounce to the main (notebook) display. Fine.

    I try to move any window to the second display, it starts moving and showing up on the secondary monitor. But partway into the second display, the side of the window turns black.

    It *appears* that this occurs at what would be at the 1920 pixel boundary if the notebook display (taking retina out of the question) were stretched over to the second monitor, if that makes sense.

    What I've done (no difference in symptoms from any of these):
    reinstalled vmware toolsdone as much as I can to disable spaces (I think)told the mac to not autoswitch between graphics cardsrestarted both the host and the guestdisabled UAC in the guesttold vmware to use all monitors when going full screen

    I'd love if anyone can offer suggestions on how to get this working properly.

    Thanks!

    Kevin

    DB:2.46:Problems With Multiple Monitors And Unity 1d


    Thanks for that update.

    For now, I've taken to using a single window, and stretching it across the two external displays. It's a bit of a hack to get multiple displays supported while still giving me one monitor for the mac apps. I can't maximize windows apps, as they want to take the full two monitors, and I can't intermingle windows from the two OSs. But until this bug gets fixed, I suppose it will do.

    Do you know what the plan is for fixing it? (i.e.: is it a low-priority bug that may be several months/years/never? or is it already slated for a bug fix release?)

    Thanks again,

    Kevin

  • RELEVANCY SCORE 2.46

    DB:2.46:Spaces Between Lines mm


    Hello everyone,

    I put a variable ?Generic_Text_ID22? on a BIP report.

    In the xml file, the variable has the following contents: Generic_Text_ID22test1 test2 test3 test4/Generic_Text_ID22

    It was saved in JD Edwards application screen one line after the other as below:
    test1
    test2
    test3
    test4

    But when i previewed it in BIP, i got spaces ( it is not a blank line but some spaces - despite having no line spacing!! ) :
    test1

    test2

    test3

    test4

    I have used ?xdoxslt:trim(Generic_Text_ID22)? but it does not remove the spaces.

    Has anyone come across this kind of problem?

    Please help me on this.

    Thank you very much.

    DB:2.46:Spaces Between Lines mm

    hi

    send me your rtf and xml i will have a look

    Mail:****

    Regards
    Prakhar

    Edited by: Prakhar on May 19, 2011 12:37 AM

  • RELEVANCY SCORE 2.46

    DB:2.46:Msi R5450 Rdig zz




    I recently purchased the MSI R5450 MD1G for use in my low end gaming computer, and have hit a snag. The box says it supports up to 3 monitors, but when i plug in my third monitor, it says i must turn off one of my other monitors first to use it. i reviewed the eyefinity requirements and noticed it says it needs a Displayport plug to run all 3 monitors. my problem, my MSI R5450 MD1G has no Displayport plug. How do i get the three monitors without this port? any help would be appreciated :smiley:

    DB:2.46:Msi R5450 Rdig zz


    To have 3 monitors, you need to use the display port. Contact MSI for an official word on this, but I believe you have to use the display port in order to run 3 monitors.

    How to contact MSI.

  • RELEVANCY SCORE 2.46

    DB:2.46:Explain Me This Spaces Lag! 1s


    is incredible, Apple has made eight updates to Snow Leopard and never repaired Spaces , this did not happen with Leopard moved the spaces between them as you want without any delay.I reinstalled the system several times and the problem is still there .so is a problem that Apple will not repair and worst of all, it will no longer be updates because Lion is coming in july, is a kick in the balls to say it is the "most advanced" , even with eight updates they do not repair something like this .here's a video of the problem:http://youtu.be/8btS324R9a8

    DB:2.46:Explain Me This Spaces Lag! 1s

    is incredible, Apple has made eight updates to Snow Leopard and never repaired Spaces , this did not happen with Leopard moved the spaces between them as you want without any delay.I reinstalled the system several times and the problem is still there .so is a problem that Apple will not repair and worst of all, it will no longer be updates because Lion is coming in july, is a kick in the balls to say it is the "most advanced" , even with eight updates they do not repair something like this .here's a video of the problem:http://youtu.be/8btS324R9a8

  • RELEVANCY SCORE 2.46

    DB:2.46:Spaces With Dual Monitors xf


    Is it possible to use the application Spaces for two monitors, I.E. on a basic Spaces you have 4 screens, and when I want to move to one screen to another I can change it, but is it possible to display TWO spaces at one time, 1 being on this monitor and another on the other?

    DB:2.46:Spaces With Dual Monitors xf

    Is it possible to use the application Spaces for two monitors, I.E. on a basic Spaces you have 4 screens, and when I want to move to one screen to another I can change it, but is it possible to display TWO spaces at one time, 1 being on this monitor and another on the other?

  • RELEVANCY SCORE 2.46

    DB:2.46:Print Preview Printing Problem px


    I have a bar graph in a form. The bar graph has 10 spaces allocated for plotting data. Any number of bars (from 0 to 10) may appear in the graph, depending on the amount of data plotted, but 10 allocated spaces will always appear even though some
    spaces may not have a bar (no data).

    When I open the form in Form View, the 10 allocated spaces are displayed along with the correct number of bars (even though some spaces may not have a bar). The same thing occurs if I print this form.

    When I hit Print Preview, however, the graph will only display the spaces that have bars (with data). The spaces without bars are deleted (not displayed). The same occurs when I then print the form.

    Does anyone know why this occurs?

    Thank you.

    DB:2.46:Print Preview Printing Problem px

    I have a bar graph in a form. The bar graph has 10 spaces allocated for plotting data. Any number of bars (from 0 to 10) may appear in the graph, depending on the amount of data plotted, but 10 allocated spaces will always appear even though some
    spaces may not have a bar (no data).

    When I open the form in Form View, the 10 allocated spaces are displayed along with the correct number of bars (even though some spaces may not have a bar). The same thing occurs if I print this form.

    When I hit Print Preview, however, the graph will only display the spaces that have bars (with data). The spaces without bars are deleted (not displayed). The same occurs when I then print the form.

    Does anyone know why this occurs?

    Thank you.

  • RELEVANCY SCORE 2.46

    DB:2.46:Spaces Freezes When Changing W/ Hotkeys? d7


    When I use Ctrl+ arrow keys to shift spaces the small window showing which space you're moving to freezes in place and my keyboard stops working except to switch spaces. This can only be fixed by opening System Preferences and disabling spaces. Logging out, restarting etc. has no effect on this.

    Any ideas?

  • RELEVANCY SCORE 2.45

    DB:2.45:Bug: With Multiple Monitors In Osx Mavericks, Using Separate Spaces, Clicking In The Vm Forces All Monitors To Switch To The Vm. Please Fix. z7



    BUG: With multiple monitors in OSX Mavericks, using separate spaces, clicking in the vm forces ALL monitors to switch to the vm.

    This is HIGHLY UNDESIRABLE.

    Please fix.

    DB:2.45:Bug: With Multiple Monitors In Osx Mavericks, Using Separate Spaces, Clicking In The Vm Forces All Monitors To Switch To The Vm. Please Fix. z7


    I'm using "Use all displays in full screen" in VMware, as well as "Displays have separate spaces" on the mac side.

    Here's an example:

    I have VMware showing on 2 displays, with the settings as I described above.

    I move display 1 over to a space in the mac side.

    I click in display 2 (which is still the vm),

    Instantly display 1 goes back to the vm.

    Call it what you want, This is a bug.

    And I'm not the only one who cares: VMWare Fusion 6 on a MAC with Mavericks - Multiple Display Setup

    VMware Fusion 6 claims to have "Complete support for OS X Mavericks". Not true.

    Parallels Desktop does not have this issue. I just switched from it to vmware actually, because its frankly not very stable.

    Overall I'm really pleased with VMware, but I was very disappointed when I ran into this bug.

    Please fix.

  • RELEVANCY SCORE 2.45

    DB:2.45:After The Apr 8 Update, If My Win 8.1 Computer Is Idle For 65 Seconds, The Monitors Turn Off Regardless Of Power Option Settings cz


    After the successful installation of the April 8, 2014 updates to Windows 8.1 computer, my monitors always turn off if the computer is idle for about 65 seconds. The monitors come back to operation when the mouse is moved.

    The displays are configured in the power options section of the control panel to never turn off. However no change to these monitor settings has any effect, the monitors always turn off after 65 seconds of inactivity.

    This never happened before the Apr 8 updates. The computer does not go to sleep or lock requiring a password, it's just the monitors that turn off. I tried resetting the power options to the default settings but nothing has any effect on the 65 second timeout
    of the monitors.

    DB:2.45:After The Apr 8 Update, If My Win 8.1 Computer Is Idle For 65 Seconds, The Monitors Turn Off Regardless Of Power Option Settings cz

    It was by accident that if even found it while I was looking at the screen saver settings and selection box, I noticed a really goofy 1 minute setting which is more indication this operating system was set-up for mobile operation.
    Thank you MS for a list of really stupid defaults with windows 8. Goodby Steve Ballmer!

  • RELEVANCY SCORE 2.45

    DB:2.45:Please Support Mac Os X Spaces kx



    This goes for all Adobe software. Spaces has been available for 2 years and yet no update to CS3 or CS4 has improved compatibility. It's an OS feature that's not going anywhere. Adobe applications routinely open documents in two different spaces. Or the UI in one space and a file dialog box in another. It's really annoying. I can't think of any other professional software that behaves under Spaces so poorly.

    DB:2.45:Please Support Mac Os X Spaces kx


    Yes please, indeed!

    Adobe has done something really weird with application windows recently. All CS versions prior to CS4 behaved very well with Spaces. I first noticed a problem with Lightroom. I was bitterly disappointed to find the same problem had crept into the CS4 apps.

    I rely heavily on Spaces and I found having to switch manually between apps after "upgrading" to CS4 a big nuisance, so much for the productivity gains...

  • RELEVANCY SCORE 2.45

    DB:2.45:How Can One Use Mission Control With Two Monitors?&Nbsp; Please Bring Spaces Back 1s


    How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.SyBB

    DB:2.45:How Can One Use Mission Control With Two Monitors?&Nbsp; Please Bring Spaces Back 1s

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3. Two things that may help you. In System Preferences Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • RELEVANCY SCORE 2.45

    DB:2.45:Multiple Displays Do Not Work At All (Osx Host With Osx Guest) c1


    I have a Mavericks host, and I am trying to run any version of OSX within a VM on that host while retaining multiple monitors. OSX 10.8, 10.9, and 10.10 guests failed to give me more than 1 monitor. I repeated these tests with a Yosemite host, with no luck either.

    It seems to me this is a Fusion problem, not an OSX config problem.
    Multiple monitors works fine in a Win 7 guest on the same host machine (rules out host machine Spaces configs)I would expect that if Fusion was exposing all of my monitors to the OSX guest, that the OSX guest would at least have some indication via Display/System prefs that more than one monitor is hooked up to it. The guest seems to think it only has 1 monitor.When I switch from single window mode to full screen (ie, "Use All Monitors") mode in Fusion, the Fusion logs seem to indicate it is still only configuring 1 monitor for the guest, where I would expect to see 6:
    2015-02-17T18:43:36.762-05:00| vcpu-2| I120: Guest: svga: SetMode: mode w,h=1920, 1200 bpp=32
    2015-02-17T18:43:36.764-05:00| vcpu-2| I120: Guest: svga: SetMode: pitch=7680
    2015-02-17T18:43:36.764-05:00| vcpu-2| I120: Guest: fb: setDisplayMode: Display ID=1, Depth ID=0
    2015-02-17T18:43:36.764-05:00| vcpu-2| I120: Guest: fb: setDisplayMode: wxh=1920x1200, bpp=32, pitch=7680
    2015-02-17T18:43:36.765-05:00| vcpu-2| I120: Guest: fb: setDisplayMode: (1) wxh=1920x1200, 32 7680

    Despite that datapoint, Fusion seems to know that I have 6 displays.
    vmware.log:2015-02-17T18:23:19.502-05:00| mks| I120: Current display topology: 6 displays, bounding size (5760 x 2400), scale 1.
    vmware.log:2015-02-17T18:23:19.517-05:00| vmx| I120: SVGA: Maximum display topology 9600x3200.

    I tried changing the VMX settings to disable monitor autodetection here; no change: VMWare Fusion 7 / 3 displays not supported?I verified that my VMWare settings indicate to use all screens in Full Screen modeI verified that the Spaces config on my Host has "Displays have separate spaces" is UNchecked (though, I tried it both ways).I'm not even getting cloned monitors in my Guest; the guest simply gets 1 of the 6 monitors.

    DB:2.45:Multiple Displays Do Not Work At All (Osx Host With Osx Guest) c1


    VMware Fusion Help Understanding VMware Fusion Navigating and Taking Action Using the VMware Fusion Interface Using Multiple Displays

    - Use All Displays in Full Screen View:

    "Use All Displays in Full Screen is not supported for Mac OS X guests."

  • RELEVANCY SCORE 2.45

    DB:2.45:Autowired dz


    Spring has the concept of autowired and the @Autowired annotation. Any equivalent to this concept in Seam?

    DB:2.45:Autowired dz

    Spring has the concept of autowired and the @Autowired annotation. Any equivalent to this concept in Seam?