• RELEVANCY SCORE 3.90

    DB:3.90:Flag Or Message When Production Order Is Released For 2 X Material In Wip zs





    Is it possible to let SAP raise a flag / e-mail or SMS a message, if a production order is released for a material that we already have in WIP. Example, if we release a order for material ABC and there is already a production order for material ABC in WIP, a flag must be raised, or managers must be notified via e-mail or SMS.

    Regards

    DB:3.90:Flag Or Message When Production Order Is Released For 2 X Material In Wip zs


    It is possible. First, you have to find out an user exit which will be triggered during order release, which will find open orders for that material. If so, it will trigger a workflow and message would be sent to concerned person.

  • RELEVANCY SCORE 3.42

    DB:3.42:Error In Order Deetion Flag : There Is Still Wip For Order Xxxx dc





    Dear,

    We have a production order with status "REL PRC BCRQ GMPS ILAS MACM RESA SETC". It released at 25.07.2011.

    There aren't any confirmation of its operations.

    We had calculate WIP in closing period, so that there is an accounting and controlling document of WIP cost allocation.

    When we set the deletion flag for production order, there were error message as follow :

    "There is still WIP for order XXXX"

    "Order XXXX : WIP in financial accounting is still to be cleared/settled"

    What should we do so that we can delete that production order.

    Thank you

    Edited by: nurlaila on Nov 11, 2011 12:53 PM

    DB:3.42:Error In Order Deetion Flag : There Is Still Wip For Order Xxxx dc


    Hi,

    you can not set "flag for deletion" until the order has WIP. Calculate WIP for the current period, if the total WIP is not zero,but the order is finished (for whatever reason) set status TECO for this order. Cal. WIP again, the exisitng value should be reversed so that the total WIP is zero. Settle the WIP. After that try to set the deletion flag.

    BR christian

  • RELEVANCY SCORE 3.37

    DB:3.37:Problem Occurs During Closing Production Order mk





    Hello,

    I have a problem regarding production order close status.

    After production order settlement when I close the production order, I get the following errors during closing of production order by tcode co02

    "UNPROCESSED FUTURE CHANGE RECS FOR ORDER 1016590 PREVENT DEL FLAG"

    Please reply me for above errors solution

    with regards

    sanjay agrawal

    DB:3.37:Problem Occurs During Closing Production Order mk


    Hello,

    I have a problem regarding production order close status.

    After production order settlement when I close the production order, I get the following errors during closing of production order by tcode co02

    "UNPROCESSED FUTURE CHANGE RECS FOR ORDER 1016590 PREVENT DEL FLAG"

    Please reply me for above errors solution

    with regards

    sanjay agrawal

  • RELEVANCY SCORE 3.31

    DB:3.31:Set Deletion Flag To Production Order 8j



    Dear Gurus,

    I have a set of production orders, which has been partially confirmed. I confirmed them fully from CO11. These orders are for our sample materials so that the cost is zero. but when i try to set the deletion flag it gives an error as

    Unprocessed future change recs for order 1004050SP prevent del. flag/completion

    Message no. CO688

    Please kindly guide to set the deletion flag for these orders or close.

    Br,

    PubuduS

    DB:3.31:Set Deletion Flag To Production Order 8j


    Hi,

    Clear the goods movement errors for the order using transaction COGI.

    Regards,

    Alok Tiwari

  • RELEVANCY SCORE 3.28

    DB:3.28:Process Order Status Crcr Needs To Re Read Master Data a8



    All,

    I have an issue with re-reading the master data in process order.

    I have an order which was released and control recipe was also released since we use pi sheet to record shop floor data.

    After releasing the control recipe user made changes into bom and he wanted to re-read master data , on the master data tab re-read master data button is not activated not if i go menu path from the header process order- functions- re-read master data is active.

    Neither i am allowed to set the deletion flag for the order, i am getting error message process order status CRCR does not alow to set the delection flag.

    Any solution to this issue is appriciated

    Either i should be able to re-read the master data or set the deletion flag...

    DB:3.28:Process Order Status Crcr Needs To Re Read Master Data a8


    In your case Control Recipe is already created, so you need to send a process message to set the status of the control recipe to finished. "CRFI". Follow the steps below,

    Transaction CO57, to trigger manually a process message with message Category PI_CRST for the process order and Control reciepe combination.

    Then use Transaction CO54 to send the Message to the process order.

    You can complete the PI Sheet by clicking the "complete" button in the PI Sheet also.

    Now try to re read master data

  • RELEVANCY SCORE 3.27

    DB:3.27:How To Unrelease Production Order dd



    Dear All,

    Pl tell me how to unrelease the released production order

    Regards

    MK

    DB:3.27:How To Unrelease Production Order dd


    Hi Mohan,

    If you want to revoke the status from REL to CRTD, then follow the menu path ( Functions - Read PP master data). This can be done if you have not done your GI and confirmations.

    While Reading the master data, system once agains select the BOM and routing and explodes the both. Material availability, scheduling and costing will be performed once again.

  • RELEVANCY SCORE 3.21

    DB:3.21:Production Order Status 3j


    how to change the status of order that is, released to unreleased?

    DB:3.21:Production Order Status 3j

    Hy,Do "Read Master Data" but mind it is only possible if no transaction has been made for the order.Status will turn to Created from Released.Regards,Dhaval

  • RELEVANCY SCORE 3.21

    DB:3.21:Idoc - Production Order Release d3



    Hi,

    Has anybody configured their SAP system for automatically creating an IDoc when a Production Order is released for execution? Thanks.

    Regards,

    V M.

  • RELEVANCY SCORE 3.19

    DB:3.19:Automatic Release The Production Order After Created It d1



    Hi,

    I would like to know how I can customize the system so that when I create a Production order through (CO01 or Kanban-Barcode), the system has automaticaly released this Production order.

    In the transaction OPKP I have defined the profile. but when I create the PO through Kanban-Barcode the system didn't take my profile and the PO is not released.

    Thanks

    Dede

    DB:3.19:Automatic Release The Production Order After Created It d1


    If you have maintained production scheduling profile and assihn that in WS view of material, then it should work with release.

    Just check is there any authorization problem fo the user, otherwise release shuold happen automatically.

  • RELEVANCY SCORE 3.18

    DB:3.18:Reservation For Components 7f



    When i create production order dependent requirement for components will be converted into reservation.

    How to have setting which will convert all dependent requirement into reservation when production order is released.

    DB:3.18:Reservation For Components 7f


    Dear,

    Please refer this thread,

    Re: Automatic Reservation

    Try with new order.

    Regards,

    R.Brahmankar

  • RELEVANCY SCORE 3.15

    DB:3.15:Production Order Deletion Flag dz



    Hello,

    I want to put deletion flag in production order, when i try to do this, its showing as purchase order exist, when i try to delete purchase order, its showing PR exist, when i try to delete PR , its showing production order exist. so its going in a cyclic way. can any one please help to solve this issue.

    DB:3.15:Production Order Deletion Flag dz


    Hi,

    I guess you are working with externaly processed operation. Once you teco the production order PR/PO will be automaticaly closed.

    Regards,

    Santosh

  • RELEVANCY SCORE 3.13

    DB:3.13:V_V2 Deleting Production Orders sf



    We are running ERP 600. One segment of the business runs MTO orders (strategy group 20). When the sales order is created, a planned order is also created (as expected.) The planned order is manually converted into a production order (typically the same day.) When V_V2 is run in batch during the evening it often sets the delete flag on the production order and we don't know why! We have tried to fix qty and date (on the schedule line) but that's not doing anything. Also, we are seeing this flag set even if the order hasn't been released (or even if it has!)

    Can anyone explain the logic behind why this is happening and what we can do to stop it? We believe that this behavior started after we upgraded to ECC 600, although the user cannot be absolutely certain of this as there were a lot of process/business changes during that time.

    Thank you,

    Dave

    DB:3.13:V_V2 Deleting Production Orders sf


    I will do that. As it's actually the SD rescheduling job that's causing the issue, I thought this might be a more appropriate area.

    Thanks,

    Dave

  • RELEVANCY SCORE 3.13

    DB:3.13:Del Flag Production Order - Operation Remove 9c



    Hello,

    is it possible to remove the del-flag of an operation in a production order?

    Thx,

    Christian

    DB:3.13:Del Flag Production Order - Operation Remove 9c


    HI Ortig,

    i think it is not possible with the existing system Please go through the link useful for you Remove deletion flag order operation

    ThanksRegards,

    Vermkat.

  • RELEVANCY SCORE 3.13

    DB:3.13:Qc Flag In Production Order (Co03) a7



    Where can i find the Quality Control flag in the Production Order (CO03)?

    Thank you.

    DB:3.13:Qc Flag In Production Order (Co03) a7


    Hi,

    There is no quality flag in production order but if inspection lot is created against the production order,you can find inspection lot in assignment tab.

  • RELEVANCY SCORE 3.12

    DB:3.12:Closing Production Order s8



    Hi All,

    Can anybody explain me the benefits of closing the Released Production order?

    Does closing production order affects GL accouts?

    Regards,

    Abhishek

  • RELEVANCY SCORE 3.12

    DB:3.12:Problem In Production Order Settlement. s1



    Hi.

    My production order have the status DLV,when i go to cost balance it shows some cost balance as negative,in overhead calculation,how to select period? there is no period in F4.When i put 1 and execute the overhead it show no order debit.

    When i execute the order settlement in KO88 a message comes showing that "There are no accured amounts,settlement is not possible.".I can not activate a deletion flag on the order also.

    Please help.

    Thanks.

    Rishi

    DB:3.12:Problem In Production Order Settlement. s1


    HI Rishi,

    Can you elaborate your question more clearly..

    Regard,s

    Ramesh.

  • RELEVANCY SCORE 3.11

    DB:3.11:Deletion Flag fj



    Hi,

    I am doing set deletion flag indicator for production order for some of the order system is giving the below message

    Unprocessed future change recs for order 1000431 prevent del. flag/completion

    Please give solution for the above error.

    Regards

    P.Srinivasan

  • RELEVANCY SCORE 3.06

    DB:3.06:Problem With License cj



    Hello I have installed Crystal Report When I put the key which is in the order in the license manager, I have a message: License Not Valid And on the bottom of the screen, I have the flag "Production" and no right on the Report Editor I do not understand Thanks

    DB:3.06:Problem With License cj


    You may want to consider contacting sales re. correct keycode. NA sales ph: 866-681-3435

    Worldwide:

    http://www.sap.com/directory/main.html

    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada

    Follow us on Twitter

  • RELEVANCY SCORE 3.06

    DB:3.06:Automatic Tr Not Created When Production Order Is Released fa



    Hi,

    For a material automatic TR was not created when the production order is released.

    For this material control cycle is not maintained.

    Is it required for automatic TR creation?

    Regards,

    Vengat

    DB:3.06:Automatic Tr Not Created When Production Order Is Released fa


    Hi Vengata Raghavan,

    Yes, u need to hav control cycle for the components for automatic TR generation.

    You can create control cycle thro LPK1 transaction.

    In general the creation of transfer requirement settings is done in production scheduling profile.

    The various options are:

    No creation of transfer requirements on order release

    X Only creation of transfer requirements on release

    1 Transfer requirement and transfer order on release

    Therefore normally TR gets generated for all the items in the order at the time of release. After release if u add any line item in the order then separate TR gets generated for that particular item.

    If you want to restrict that, if TR is not generated for any one of the item then u can restrict TR generation for all other items also by checking the tick box (Complete Transfer Requirement) in production scheduling profile.

    Hope above clears your doubts.

    Regards

    Suri

  • RELEVANCY SCORE 3.04

    DB:3.04:Post Quality Stocks To Scrap But The Reference Production Order Was Deleted 9a



    Hello Guru,

    We have a production order that was been flag for deletion already it quantity is in Quality Stocks we want to scrap this stock, but when we used QA11 error gives us order 10002233 is flagged for deletion. the order has a inspection lot how could we scrap this even the order is already flagged for deletion already.

    Thanks

    DB:3.04:Post Quality Stocks To Scrap But The Reference Production Order Was Deleted 9a


    Dear,

    Revoke will not create any problem but when you do the scrap the material it will taken in to account.

    Regards,

    R.Brahmankar

  • RELEVANCY SCORE 3.04

    DB:3.04:Printing Rework Operation Details 1s



    Hi,

    Are there any best practices to print the rework operation details on the production order print out? If I insert a rework operation into a released production order (that means the routing and the pick list have already been printed when the order was released), how do I print the rework operation? Do I need to reprint the updated order ?

    Thanks

    DB:3.04:Printing Rework Operation Details 1s


    Hi,

    To print rework operation detail on production order, you need to use reprint option as you are adding rework operation after release of production order.

    Thanks,

    Yogesh

  • RELEVANCY SCORE 3.04

    DB:3.04:When Will 10g Production Be Released? sk


    Good Afternoon,
    Anyone know when production will be released?

    Thanks

    DB:3.04:When Will 10g Production Be Released? sk

    As Markus says, the JDeveloper 10g production date is still Q1 2004.

    Thanks
    Blaise

  • RELEVANCY SCORE 3.04

    DB:3.04:Serial No. In Production Orders sj



    in the production scheduling profile, the setting is such that, the production order gets released when it is created.

    the serial numbers are issued to each finished good unit when the production order is released.

    Can it be possible to issue the serial number from the order start date and not the creation date?

    DB:3.04:Serial No. In Production Orders sj


    Hi Anbalagan ,

    You can do setting for which stage serial number is to be checked in Transaction OIS2 in which

    you need to give serializing procedure which defines in which business function you need serial

    number is to be checked .

    But as per SOX the serial number reconcillation will be done Quality also ie whereever Goods

    movement is there will prompt serial number checking . otherwise you can create your own serial

    number profile in which you can restrict that at the time of goods mvt you need serial no checking

    Regards,

    Vimal

  • RELEVANCY SCORE 3.02

    DB:3.02:How Do I Remove Male Sensitivity Flag When Printing d9


    When I print an email message I get a sensitivity: male flag or something that is printed on each job. Is this a part of the bad patches that were released a couple weeks ago?

  • RELEVANCY SCORE 3.01

    DB:3.01:Production Order Confirmation Error dc



    Sir,

    At the time of confirming production order in CO11N message " Production order is closed " appears although production order status is released, partly confirmed, already coasted.

    Thanks

    DB:3.01:Production Order Confirmation Error dc


    Hi,

    Check your production order status if it contains CLSD.

    Is your production order ediatble in co02.

    check you are entering corrrect production order number in co11n.

    If the order has closed status then remove the closed status as suggested by other forum experts.

  • RELEVANCY SCORE 3.01

    DB:3.01:Message V1604 dx



    Hi all,

    I am working in Assembly order scenario in VC.

    When the production order created against the sales order is released and

    I try to change the sales order I get a warning message

    V1604 - A production order is available for item 000010

    I want to change this message to Error message from warning message as I dont want any sales order changes after production order is released.

    I tried to search in all system message but could not get any Application area

    V1 and message number 604.

    If anybody can throw some light on this I would be thankful.

    Cheers

    DB:3.01:Message V1604 dx


    Can you give me some details about the solution you are talking about.

  • RELEVANCY SCORE 3.00

    DB:3.00:Production Order Not Released cz



    Production order is not released, but in md04 the order shows up as ordernumber/PP01/Re.

    Can anybody explain this?

    DB:3.00:Production Order Not Released cz


    Yes. Order header does not have REL but md04 shows order number/PP01/Re

  • RELEVANCY SCORE 2.99

    DB:2.99:Re: Availability Check Fpr Production Order After Released. 88



    Prodsuction order is released. Materials pertainig got reserved for the order, goods issue not posted getting error saying availability check when checked the log. Kindly help me to solve my issue. Thanks in advance.

    DB:2.99:Re: Availability Check Fpr Production Order After Released. 88


    Dear,

    Check in SPRO transaction - OMCP, movement type push button

    Check movement type 261...any dynamic ave check is activated?

    AW mess. only issued in the case of non-availability

    BE mess. only issued in the case of non-availability

    EMessage in any case: W mess. for non-avail., otherw. S mess.

    FMessage in any case: E mess. for non-avail., otherw. S mess.

    SAvailability check only with simulation

    IF the setting is B, then it may give error if the checking rule assigned is looking for different receipt elements then one assigned in production order

    Check - OMCP - in transaction code push button - Which checking rule is assigned to MB1a/MIGO?

    Check in material master MRP3 view which Checking group for availability check is assigned in that plant.

    Now combination of checking rule in OMCP and checking group will decide the receipt and issue elements when you issue the material in MB1a/MIGO.

    bCheck the receipt and issue element in define checking rule push button by passing above checking group and checking rule/b----1

    Check in OPJK, for the combination of plant/order type/business function(2), which checking rule is assigned usually it is PP.

    bCheck in OMJJ, for the checking group from material master and checking rule from OPJK, the receipt and issue elements in OPJJ./b----2

    Is the result in 1 and 2 are same or different?, then you will have the problem you explained.

    Hence you need to talk to MM and switch off the settings in OMCP for the movement type concerned, then it will be al right

  • RELEVANCY SCORE 2.98

    DB:2.98:Production Order Closing 3a



    Hi all,

    after doing technical completed , when I m click on close to production order , I m receiving "Unprocessed future change reces for order order no prevent del. flag/completion" error.

    Plz give solution for this problem.

    DB:2.98:Production Order Closing 3a


    Look at this thread:

    Process order Closing problem..

  • RELEVANCY SCORE 2.98

    DB:2.98:Transfer Order Not Created When Production Order Is Released c9



    Dear experts,

    I have below scenario regarding PP-WM interface,

    1.Production order create for material which has production scheduling profile, and profile has been designed to create transfer order when production order is released.

    2. all components in the production order had stock more than required quantity when order was released.

    3. all components in production order are maintained with WM view in material master.

    4. components are assigned to an operation which is performed at a work center assigned with production supply area.

    with all above conditions , is it possible that system does not creates a tarnsfer order when production order is released but generates a transfer requirement.

    your reply will be greatly appreciated and will surely be rewarded.

    Thank you

    Anand

    DB:2.98:Transfer Order Not Created When Production Order Is Released c9


    issue being closed since no answer received for a long time.

    Csaba's reply helped in analyzing and proceed further

  • RELEVANCY SCORE 2.97

    DB:2.97:Production Order f8



    Hi All,

    Can any one help me on IDOC should be send automatically when production order is released, I know how to send Manually and I tried it is working fine, but the problem is client needed that Idoc to be launched automatically when the production order is released for this transaction co01.

    My mail Id : balla.srinivas9@gmail.com

    Thanksregds,

    srinivas.

    DB:2.97:Production Order f8


    Hi All,

    Can any one help me on IDOC should be send automatically when production order is released, I know how to send Manually and I tried it is working fine, but the problem is client needed that Idoc to be launched automatically when the production order is released for this transaction co01.

    My mail Id : balla.srinivas9@gmail.com

    Thanksregds,

    srinivas.

  • RELEVANCY SCORE 2.97

    DB:2.97:Trigger An Production Order When It Is Released Through Idoc ca


    Hi friends,i want to trigger an idoc when ever i change production order or release a production order .can u tell me how to trigger it and what are the message types and idoc types.thanks in advance,regards,roberts.k

    DB:2.97:Trigger An Production Order When It Is Released Through Idoc ca

    Hi,please have a look at some other threads (e.g. search term NACE - TA-code of message output customizing):Is there an idoc to create a quotation?IDOC help PLS THIS IS URGENTSince you did not mention, which IDOC you like to use, I can't give any hints in this part. You're asking for the function module. Most probably it has to be own with (roughly) following content:- Take key from NAST-structure and read additional production order values.- Fill communication and data structure of your IDOC-type- Create your IDOC with FM like IDOC_OUTBOUND_WRITE_TO_DB or IDOC_INBOUND_SINGLE (if you want to create something in same system, IDOC_INBOUND_SINGLE is good).Regards,Christian

  • RELEVANCY SCORE 2.97

    DB:2.97:Setting Deletion Flag Or Locking Workcenter. 8j



    hi,

    i would like to know what difference it makes in locking the workcenter and setting deletion flag?

    which one is a more prefffered method?

    i have set lock for a workcenter.

    after which i tried to use the same in routing, system displayed only an infomation message "workenter is locked".

    it allowed me to go ahead and add the workcenter and save the routing.

    Is there any way for system to prompt an error message, when a workcenter with lock is selected in a routing /production order /during confirmations?

    thanks in advance

    regards

    lyroj

    DB:2.97:Setting Deletion Flag Or Locking Workcenter. 8j


    Hi George,

    Locking a workcenter is preventing the workcenter to be used for production.

    You can assign it to the routing here in this case it will show a warning. If you have any scenario wherein you don't want any production to happen in the workcenter then you can directly go to the change mode CR02 and set the lock at the workcenter, so this workcenter assigned to the routings will be affected with this change.

    Setting deletion flag is related to the process wherein you don't want the workcenter anymore and you want to delete the workcenter from the system. So during the next organization run this workcenter with deletion flag will be picked for consideration to be deleted from the system and it will be deleted, if it does not have any dependency. Let's say if it is attached to a routing which is attached to a production order which still is under production then this workcenter won't be deleted.

    I hope this helps you in differentiating both the process. Please let me know if you have any further queries.

    Regards,

    Abhijeet Guha

  • RELEVANCY SCORE 2.96

    DB:2.96:Mto Production Order Issue k9



    Hi Gurus,

    We have an issue with the MTO process.

    Production order is generated automatically when the sales order is created.

    So my user while creating a sales order, with out knowingly he entered different company code, production order is been generated and activities done to the production order. Activities like production confimration, goods issue and goods reciept is done to production order.

    After they realised they entered a wrong company code, then user rejected the sales order line item, which automatically sets the deletion flag to production order tied to that sales order.

    Now user wants to remove the deletion flag to production because they are costs assiciated with it.

    Is there a way to remove the deletion flag to production order for MTO process?

    If there is no way, what would i suggest my users to follow?

    Please advice.

    Thanks,

    Quantum.

    DB:2.96:Mto Production Order Issue k9


    Dear

    Now user wants to remove the deletion flag to production because they are costs assiciated with it.

    Goto -CO02-Production Order Number -Select Function menu from Header -Hit Deletion Flag Option -Mark Revoke -So it will remove the deltion Falg from the Production Order .

    You need to tell your user the same way as explained above so that user can perfom the same

    Regards

    JH

  • RELEVANCY SCORE 2.96

    DB:2.96:Read Pp Master Data Not Setting Prod Order From Rel Back To Crtd fz



    I created a production order, released it, and then made changes to the BOM. I went back into the production order and did Functions Read PP master data. The system gives the message "error when checking BOM - reading routing without BOM not possible after release".

    I have deleted all relevant (1) inspection lots (2) transfer reqs. No transfer orders exist and no material movements appear to have been executed.

    What am I missing? Why won't the system read the BOM?

    Thanks much!

    Sarah

    DB:2.96:Read Pp Master Data Not Setting Prod Order From Rel Back To Crtd fz


    Sarah,

    It is clear from the Logs that there are problems with exisiting TR against the order. Please take the help of your LE Consultant for clearing the TR's.

    Regards,

    Prasobh

  • RELEVANCY SCORE 2.95

    DB:2.95:Print Production Order With Status Crtd 8k



    Hi gurus,

    Our system is configured to print production order when the order is released, but when the order is in status CRTD,Created, (not Released) we try print the order an error message appears "Object ORD xxxxxx has system status CRTD (Created). According to this status, transaction 'Print order (original)' is not allowed".

    Is it possible print orders before release action?

    Thank you, I have points for the best answers.

    DB:2.95:Print Production Order With Status Crtd 8k


    Through transaction BS22 you can configure the system to Print the Order even at CRTD status.

  • RELEVANCY SCORE 2.94

    DB:2.94:Problem Occurs During Closing Production Order ca



    Hello,

    I have a problem regarding production order close status.

    After production order settlement when I close the production order, I get the following errors during closing of production order by tcode co02

    "UNPROCESSED FUTURE CHANGE RECS FOR ORDER 1016590 PREVENT DEL FLAG"

    Please reply me for above errors solution

    with regards

    sanjay agrawal

    DB:2.94:Problem Occurs During Closing Production Order ca


    Dear

    thanks for reply

    problem resolved

    sanjay agrawal

  • RELEVANCY SCORE 2.94

    DB:2.94:Ko88 Message Mill_Ua044 When Settling Production Order pp



    Hi

    I'm working with Sap for mill products. When a try to settle a production order that contains coproducts I get the following error:

    MILL_UA044 Material price for order 2000128 material 103400 could not be determined.

    However I have already calculated and released the cost estimates for these materials and I was even able to calculate variances without getting errors.

    Plese if someone can help me as soon as possible i would aprecciate it!

    thanks a lot

    Fernanda

    DB:2.94:Ko88 Message Mill_Ua044 When Settling Production Order pp


    Hi

    Did you run CO8A / CO8B before calculating variances??

    br, Ajay M

  • RELEVANCY SCORE 2.94

    DB:2.94:No Prod.Order Created After Setting Creation Flag In Apo 1j



    Hi all,

    I'm encountering a new problem. I created a material, and some data adjacent to it (planned order, prod. order, planned ind. rep., various stocks, a routing and various BOMs) in ECC 6.0, which I successfully CIF-fed to APO 5.0.

    When I modify the quantity of the prod. order in the prod.view in APO everthing works out just fine, i.e. the modification is taken over in ECC, BUT when I set the conversion flag in order to create a production order in ECC triggered from APO... absolutely nothing happens.

    I get no error-message (only planning result successfully saved). When I try to remove the conv. flag again, the system says that it's not possible.

    Any ideas what could be the problem?

    Thanks in advance!

    Regards, Bobby

    DB:2.94:No Prod.Order Created After Setting Creation Flag In Apo 1j


    Hi Bobby

    Please Do the following Changes in the global Settin of PP/DS Path SPRO Supply Chain Planning- PPDS-Global Setting-Maintain Global Parameters and Default Values

    Change the Transfer to R/3 Inhouse Production to 1: Create Transfer events from Cnversion indicator

    Regards

    Rajan

  • RELEVANCY SCORE 2.94

    DB:2.94:Message Type - Process Orders jc



    Hi Gurus,

    What is the message type and Idoc type for the process order? I found the message type LOIPRO for the production order, but didn't found for process order.

    My requirement is to send the process order details to a logical system when the process order is created / released or changed.

    Thanks

    nagarajan

    DB:2.94:Message Type - Process Orders jc


    Hi Nagarajan Ramudu

    Program: RCCLORD-Generate Production Order IDocs

    Fm: CLOI_MASTERIDOC_CREATE_LOIPRO

    Message Type LOIPRO (Production Order)

    Process code ABI_AIDN_IN (inbound)

    check below useful link:

    Re: Process Orders, send idoc (LOIPRO) while creation/modification(COR1+BADI)

    With above info you can resolve the your issue

    Thanks

    Ramesh

  • RELEVANCY SCORE 2.92

    DB:2.92:Sales Order And Production Order Status pj



    Hi Colleagues,

    We need to use sales order status functionality, so that when sales manager set status , for example, "dont produce" a production order can not be released.

    Has any one dealt with that?

    Thank you.

    DB:2.92:Sales Order And Production Order Status pj


    Ok I got you scenario. But to my knowledge you have to work through exit only or You keep an eye on Exception message. Do not convert Prod Ord if exception message is 20.

  • RELEVANCY SCORE 2.91

    DB:2.91:Avoid "Order Has Missing Parts" When Release Prd Order In Bapi x7



    Hi Experts,

    I want to Use a bapi for Release a Production Order ( BAPI_PRODORD_RELEASE).

    In the normal scenario we are using CO02 and Release the order and save. when Click the Release Order Flag, it is been getting the error message with saying 'Order has Missing parts'. But we can avoid that message By Clicking Release Order Button and Release the order.

    But when im using BAPI," BAPI_PRODORD_RELEASE" there is no way to avoid this error msg. So Could any one please let me know any method to do make this continue to release order with avoiding this error msg in BAPI .

  • RELEVANCY SCORE 2.91

    DB:2.91:Deleting A Production Order fp



    Hello All,

    I would like to enable a batch management feature for a finished product.

    I would like to delete existing production orders and planned orders.

    I deleted the component quantities in the production order and set the TECO flag.

    I also enabled the deletion flag.

    I removed all planned orders from MD04 and there are no forecast values.

    MMBE also shows zero quantity.

    However when I try to change the material using mm02 it still gives the following message:

    Production orders already exist for the material

    What else do I need to do?

    Thanks in advance

    George

    DB:2.91:Deleting A Production Order fp


    Hi,

    Use the program PRARCHP1 to set deletion flag deletion indicator for all the production orders for the material.Now try activaing the batch.Remove all the stocks open purchase orders delete planned orders.

    Hope this will help.

    regards,

    kaushik

  • RELEVANCY SCORE 2.91

    DB:2.91:Releasing Production Order 9j



    When Iam Releasing Production order iam getting message No

  • RELEVANCY SCORE 2.91

    DB:2.91:Delete Work Order cf



    Hello,

    I have created a wrok order which is in released REL status. I want to delete the work order (deletion flag set), but when I go to functions --- delete, it is not active. Is there any way I can delete the work order? I have not done goods issue, labour confirmation to the work order.

    Prasanth

  • RELEVANCY SCORE 2.90

    DB:2.90:Error During Wm Material Provision For Order ......... c1



    Dear expert,

    I have activated WM PP to automatically create Transfer Requirement when production order is released.

    But, when releasing production order, and click save, this error appear:

    "No production storage bin could be found (plant and material number here)"

    But actually i have created storage bin for storage type 100 (production supply).

    How to solve this?

    point will be rewarded.

    DB:2.90:Error During Wm Material Provision For Order ......... c1


    In plant 1, production supply area 2 and material 3 do not have any defined production storage bin.

    Have you entered the bin in LPK1 to your control cycle?

  • RELEVANCY SCORE 2.90

    DB:2.90:Add-On Generation Issue am


    Question: Can I manage with SDK the Production Order, the "receipt from Production" or the "Issue for Production"?With SBO2004 there is a new object (comparison wit SBO 6.5): Production Order, OWOR!!. The SBO help give a description of Production Order, OWOR.There are new fields: "Sales Order, Customer, ..."But SDK 2004 has a OLD object of Production Order, without "Sales Order, Customer" that work on OWKO (Note: OWKO, not OWOR)SDK 2004 allow to use the OWOR Object? and the relative document to move the warehouse ("receipt from Production" and "Issue for Production"?)I create a SAPbobsCOM.WorkOrders in SBO2004When I Add the object, return a error: -5002, "Scaduto/congelato " ( = "Abgelaufen / Eingefroren" = "Expired / Frozen")The new works order objects haven't been implemented in the SDK.I have find old Topic refer to WorkOrder:1)/message/85606#85606 [original link is broken]2)Wrote Melinda: I have not been able to find any information about when this will be changed - whether a service pack will be released for this problem. If anyone has any more information it would be great Work Orders Object not working in 2004 DI?I had work in 6.5 with WorkOrder. I can't convert my addon in 2004!!!!

  • RELEVANCY SCORE 2.90

    DB:2.90:Error Cancelling A Production Order p8



    SBO Version: 8.8 PL20

    Forum,

    I have a user who is trying to cancel a production order by right clicking and selecting 'Cancel' however when trying this they receive the following message:

    Action is valid for planned or released production orders with no transactions [Production Order - Product No.] [Message 3702-18]

    The Production Order's status is - Released.

    Anyone any suggestions?

    Orla

    DB:2.90:Error Cancelling A Production Order p8


    It means you have made Receipt from production and such Production Orders Can not be cancelled. You have to close it.

    I would suggest you to make Stock Reconciliation to make the inventory Stock Matched and if possible do Inventory Revaluation too to take the transactions with correct costing effect ahead.

    Regards,

    Rahul

  • RELEVANCY SCORE 2.89

    DB:2.89:User Exit Co01 7d



    GUY'S

    when i go for tcode:CA02 and set status to 3 in general

    data section and then go to tcode co01 to create

    production order for the same material and same plant,

    it pop up message ( routing not released:15294)

    and then it save it.but requriment is not to create

    production order when routing is set to 3,problem

    is i ckecked all possile user-exit ,but non of the user-exit is triggered for particular situation,pls help,

    it's urgent and i am not getting any idea

    DB:2.89:User Exit Co01 7d


    HI ALL

    i suppose u would have taken time to understand the issue ,from starting itself i am saying that i have

    program to find user-exit ,but which user-exit

    will help me in solving my issue.

  • RELEVANCY SCORE 2.89

    DB:2.89:Re: Goods Issue Posting Through Migo For Production Order sk



    I have released the production order, when I want to post the goods issue through migo to the concerned order I am getting error saying that material "No components exist but there was stock in the storage location for unresticted use.

    I have checked through MMbe transaction.

    DB:2.89:Re: Goods Issue Posting Through Migo For Production Order sk


    Are there components in the Production Order? If yes, is the reservation created and movement allowed for the reservation?

    Lakshman

  • RELEVANCY SCORE 2.88

    DB:2.88:Deletion Of Flag In Production Order jc



    I am trying to remove a flag from production order, Error is coming that you r not authorised to BSV1. Can anybody explain why it is coming.

    DB:2.88:Deletion Of Flag In Production Order jc


    As the error message says...you are not authorised to access that transaction. Contact your basis security team for authorisation.

    Thanks,

    Ravi

  • RELEVANCY SCORE 2.88

    DB:2.88:How To Avoid Deletion Flag In Process Order From Changes In Sales Orders 91


    Hello

    We are using a make to order process, the problem is when we change the delivery date in the sales order or the quantity and save the sales order in tx code VA02 set deletion flag on the released order, but we dont want to delete order production, it happens because the inspection type 03 is not longer in the product material master and we dont need it. We would like to know how to avoid set deletion flag in order process from VA02
    Please has anyone know how to stop it.

    Regards

    DB:2.88:How To Avoid Deletion Flag In Process Order From Changes In Sales Orders 91


    Hello Henry.

    I think you have posted to the wrong forum.

    This is for SAP Event Management.

  • RELEVANCY SCORE 2.87

    DB:2.87:Production Order Issue dj



    Hi,

    I have one peculiar issue that when the goods have not posted to that particular production order, system is accepting goods delivered to that production order, kindly suggest any possibility to fix the error message not to post the delivery when there is no issues happen against that particular production order.

    Regards,

    Muthu.

    DB:2.87:Production Order Issue dj


    Hi,

    The best possible solution would be to go with User Exit.

    Enhancement - MBCF0002

    Functional Module - EXIT_SAPMM07M_001

    Include - ZXMBCU02

    You can write code while doing mvt 101 for production order

    System will check from RESB table how much 261 of components have been done .

    Try with the help of your ABAPer.

    Pls refer below link

    Prevent Goods Receipt without confirmations

    default quantity of confirmation(co11) should allowed in goods movements mb

    Regards,

    Sankaran

  • RELEVANCY SCORE 2.87

    DB:2.87:Delete Production Order ka



    Hi,

    How to delete the production order..??

    In my case my production order is released and can able tp delete it going to Functions-Deletion Flag---Active.

    But I want to know the inportance of the icon present in Control tab of CO02 t-code.

    If I press F1 it is showing as below:

    You can remove the deletion flag as long as the order is not marked as 'deleted'. You can set and remove the flag, using functions in master data maintenance.

    So how to do this..??

    It's urgent.Please guide me.

    Regard's,

    Uday.

    Edited by: uday Kiran 1903 on Dec 13, 2011 9:37 AM

  • RELEVANCY SCORE 2.86

    DB:2.86:Choose From List Problem !!! 1p



    Hello Expert !!!!

    i have a problem in choose from list ..i want to show Production Order in choose from list which is in Released State,but when i add object type '202' it gives me all production Order number .

    is there any possibility to show those production order which is in Released State..

    please help me out...

    Thanks

    DB:2.86:Choose From List Problem !!! 1p


    Hi

    Please close this thread as answered.

    Regards

    Arun

  • RELEVANCY SCORE 2.86

    DB:2.86:Production Order Deletion z8



    Hi All,

    While activating the deletion flag in the production order , message says " Purchase order still exists ".

    In the purchase order delievery completed indicator is also set.

    How to set the deletion flag for the sub-contracting production order.

    This is production order deletion is need to skip those production orders, which should not repeate while month end CO processing.

    Thanks,

    R.S.Sridhar

    DB:2.86:Production Order Deletion z8


    Please ensure Final invoice is selected(Ticked) in purchase order, before delete the linked Prod Order.

    Regards

    Gururaja Hebbar

  • RELEVANCY SCORE 2.86

    DB:2.86:Final Invoice Indicator ja



    Hi All,

    In my company they are doing Production Order sub-contracting (i.e.,) my production order has 5 operations in it operation 3 is processed by external company, so PR is automatically triggered for that by control key. Purchase order for that PR is created and then during MIGO automatically ERS is happening.

    Here is the issue starts, When I try to close the Production I am getting an error

    *Purchase Order still exist ( even though Delivery completion indicator is set)

    *Final Billing indicator is not set.

    based on the above error message then I flag the FINAL INVOICE INDICATOR in the INVOICE tab of purchase order, I am able to close the production order.

    Please guide me,

    Is their any process to automatically set FINAL INVOICE INDICATOR during MIGO or else any other process please.

    Thanks in Advance

    DB:2.86:Final Invoice Indicator ja


    Hi,

    In VL10B delivery gets created in the background. Go to ME23N open the purchase order and the check the delivery date of item yyyyy. When creating the delivery via VL10B , system creates based on the calculation rule and the variants defined which consists of combination of shipping condition, delivery to be considered based on working days defined.

    In this case you need to delete the delivery created. Then go to purchase order maintain the same delivery dates for both the items xxxx and yyyy. and then create the delivery.

    The othere work around is create a new delivery for the left out item yyyy by changing the calculation rule.

    Br,

    Tushar Patankar

  • RELEVANCY SCORE 2.86

    DB:2.86:Need Print Out When Deletion Flag Set To The Production Order d1



    Hi,

    I need some guidanceu2026u2026

    My client requirement is that when production order set u201Cdeletion flagu201D, system should create a print out with information u201CProduction order deletedu201D. How we can map this scenario in sap.

    Thanks regd.

    PNU

    DB:2.86:Need Print Out When Deletion Flag Set To The Production Order d1


    Hi Pravinnu,

    Well try with this T- code COHVOMPRINT or CO04n ok.

    I hope it helps you.

    Regards,

    Madhu.G

  • RELEVANCY SCORE 2.85

    DB:2.85:Production/Process Order Release Userexits/Badis 87



    Hi,

    I want the list of UserExits/BADIs to code user functionality when a

    Production/Process Order is released.

    Thnx,

    Shivaa.

    DB:2.85:Production/Process Order Release Userexits/Badis 87


    In transaction SMOD

    User exits -

    enter PPC*...all are Production orders

    ener CONF* for all exits of confirmation

    XMBF0001 Customer exits for stock determination

    XMRM0001 User exits: Backflushing in REM.

    XCOM0001 User exit: Material quantity calculation.

    In SE81 you can get all BADI's...

  • RELEVANCY SCORE 2.84

    DB:2.84:Production Order With Components Consumed From Vendor Consignment Stock ak



    Hi expert,

    I have a production order with components and some of the components should be consumed from vendor consignment stock.

    When the order is created/released : is there a possibility to have those components created with "special stock indicator" = 3 (consignement stock) by default?

    Thanks,

    P.

    DB:2.84:Production Order With Components Consumed From Vendor Consignment Stock ak


    Dear Mangalraj.S

    I just wanted to make sure that i was not missing a point.

    Thanks for the suggestion but we will use the manual option...

    P.

  • RELEVANCY SCORE 2.84

    DB:2.84:Close Production Orders With Inspection Lot Type 04 Assigned 1p


    Hi Gurus!!We are trying to close production orders wont be used by production area but the system shows us the error message "Inspection lot type 04 for order XXXX has not yet been completed". When the production order is released a inspection lot type 04 is created automatically by system. I was wondering if there is any PP or QM customizing to fix it? Could you help me with this issue?In advance thanks for your attention,BR,Valdevair

    DB:2.84:Close Production Orders With Inspection Lot Type 04 Assigned 1p

    Dear,I see... I would like to thank you for your answer.BRValdevair

  • RELEVANCY SCORE 2.84

    DB:2.84:Planned Order To Production Order Conversion Check ks



    Hi,

    I want to put the check as without releasing the Document x; planned order should not be converted to production order. i want to get the error message as Document not released. please guide me.

    Regards,

    Mastan.

    DB:2.84:Planned Order To Production Order Conversion Check ks


    Hi Mastan

    Use the user exit PPCO0007 function module EXIT_SAPLCOZV_001. This is exit while production order save, while saving you can use condition of Document release.

    Regards

    Kesava

  • RELEVANCY SCORE 2.84

    DB:2.84:Dynamics Nav - Production Order Problem a8


    I have problem with production order. I made new work center (A) and made new routing with only one line (work center A).
    A assign this routing to item and I made released production order with this item source. When I start Refresh command, I get message: 'Error when calculating backward. Calendar is not available before date for work center A.'

    DB:2.84:Dynamics Nav - Production Order Problem a8

    Hello same problem i am facing can you please me on this issue.
    while doing refresh production order i am getting following error.i am using work centers.

    Error when calculating backward. Calendar is not available before 01/01/14 for Work Center 1005

  • RELEVANCY SCORE 2.84

    DB:2.84:Production Order Userexits m9



    Hi All,

    Plz provide me with a list of PP user exits,BADI's,BTE's which trigger when a production order is released.

    Thanks Regards,

    Sudheer.

    DB:2.84:Production Order Userexits m9


    Hi,

    BAdis:

    CEWB_CHA_MENU_EXTERN Menu Extensions in the Engineering Workbench

    CEWB_COM_MENU_EXTERN Menu Extensions in the EWB (SAP Internal)

    CEWB_GEN_MENU_EXTERN Menu Extensions in the Engineering Workbench

    CEWB_ITM_MENU_EXTERN Menu Extensions in the Engineering Workbench

    CEWB_MST_MENU_EXTERN Menu Extensions in the Engineering Workbench

    CEWB_OPR_MENU_EXTERN Menu Extensions in the Engineering Workbench

    CEWB_TSK_MENU_EXTERN Menu Extensions in the Engineering Workbench

    CEWB_TSK_SCREENS Screen Extensions for Task Lists in the EWB

    CEWB_TSK_UPDATE Task List Maintenance and Checks in the EWB

    CRHRORG Delete Action, Delete HR Organiz. Unit, Set Deletion Flag

    CR_WORKCENTER_SELECT Performance Selection Class System for CIF PPM

    EWB_SELECTION Selection Within the Engineering Workbench

    ROUTING_EXIT User Exits for Routings

    SMOD_MPRO0004 Postprocessing of forecast errors and exception messages

    BADI_CY_AMT_COMPUTE BADI for KBED Amount Compute

    BADI_CY_LD_DIST001 BAdI for Load Distribution During Capacity Planning

    BADI_CY_SAPLCY18 Operation Status: Column Based on KBED Status

    CX_OFFSET_CALID Use of Work Center Calendar in Case of Lead/Follow-Up Time

    MD_ADD_COL_EZPS BAdI: Extra Columns for Evaluation PP-MRP Reqmnts Planning

    MD_ADD_COL_OVERVIEW BAdI: Display of Additional Columns in the Material Overview

    MD_ADD_ELEMENTS BAdI for adding additional requirements/receipts

    MD_CHANGE_MRP_DATA BAdI for Changing Data When Reading In MDPSX

    MD_DISPLAY_ELEMENT BAdI for Changing Display of MRP Elements

    MD_EXT_SUP BAdI for Determining the Issuing Storage Location

    MD_INTERACT_PLANNING BAdI for Deactivating Changeability of MRP Elements

    MD_LAST_LOT_EXACT BAdI for Calculating Last Lot Exactly in Individual Segment

    MD_MODIFY_PRODVERS BAdI for Modifying Production Version

    MD_MODIFY_SOURCE BAdI for Modifying Source Determination in MRP

    MD_MRP_LIST BADI for further processing of MRP list

    MD_MRP_PARAMETERS BAdI: Change Planning Parameters

    MD_MRP_RUN_PARALLEL Add-Ins for parallel planning run of requirements planning

    MD_PIR_FLEX_CONS BAdI for flexible planned ind. req. consumption/reduction

    MD_PLANNING_RESULT BADI for Issuing Planning Result

    MD_PLANNING_SCENARIO BAdI for maintaining addnl parameters in the plng scenario

    MD_PLDORD_BOMEX_CIF BAdI: Deactivation of BOM Forced Explosion in CIF

    MD_PLDORD_CHANGE BAdI for Changing Planned Orders

    MD_PLDORD_POST BAdI for Updating Planned Orders

    MD_PLDORD_SCHEDULING BAdI for scheduling planned orders

    MD_PLDORD_TIME_STAMP BADI for publishing time stamp problems

    MD_PURREQ_CHANGE BADI for changing purchase requisitions

    MD_PURREQ_POST BADI for updating purchase requisitions

    MD_PURREQ_REL_STRAT BAdI for Deactivating Release Strategy for MRP Purch. Reqs

    MD_STOCK_TRANSFER BADI for changing the requirement date during stock transfer

    MD_SUBCONT_LOGIC BADI for defining subcontracting logic

    You can find user exits available for a particular transaction by executing the following program. Copy this code in SE38 and execute the same.

    report zuserexit no standard page heading.

    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.

    tables : tstct.

    data : jtab like tadir occurs 0 with header line.

    data : field1(30).

    data : v_devclass like tadir-devclass.

    parameters : p_tcode like tstc-tcode obligatory.

    select single * from tstc where tcode eq p_tcode.

    if sy-subrc eq 0.

    select single * from tadir where pgmid = 'R3TR'

    and object = 'PROG'

    and obj_name = tstc-pgmna.

    move : tadir-devclass to v_devclass.

    if sy-subrc ne 0.

    select single * from trdir where name = tstc-pgmna.

    if trdir-subc eq 'F'.

    select single * from tfdir where pname = tstc-pgmna.

    select single * from enlfdir where funcname =

    tfdir-funcname.

    select single * from tadir where pgmid = 'R3TR'

    and object = 'FUGR'

    and obj_name eq enlfdir-area.

    move : tadir-devclass to v_devclass.

    endif.

    endif.

    select * from tadir into table jtab

    where pgmid = 'R3TR'

    and object = 'SMOD'

    and devclass = v_devclass.

    select single * from tstct where sprsl eq sy-langu and

    tcode eq p_tcode.

    format color col_positive intensified off.

    write:/(19) 'Transaction Code - ',

    20(20) p_tcode,

    45(50) tstct-ttext.

    skip.

    if not jtab[] is initial.

    write:/(95) sy-uline.

    format color col_heading intensified on.

    write:/1 sy-vline,

    2 'Exit Name',

    21 sy-vline ,

    22 'Description',

    95 sy-vline.

    write:/(95) sy-uline.

    loop at jtab.

    select single * from modsapt

    where sprsl = sy-langu and

    name = jtab-obj_name.

    format color col_normal intensified off.

    write:/1 sy-vline,

    2 jtab-obj_name hotspot on,

    21 sy-vline ,

    22 modsapt-modtext,

    95 sy-vline.

    endloop.

    write:/(95) sy-uline.

    describe table jtab.

    skip.

    format color col_total intensified on.

    write:/ 'No of Exits:' , sy-tfill.

    else.

    format color col_negative intensified on.

    write:/(95) 'No User Exit exists'.

    endif.

    else.

    format color col_negative intensified on.

    write:/(95) 'Transaction Code Does Not Exist'.

    endif.

    at line-selection.

    get cursor field field1.

    check field1(4) eq 'JTAB'.

    set parameter id 'MON' field sy-lisel+1(10).

    call transaction 'SMOD' and skip first screen.

    *---End of Program

    Regards,

    Srilatha.

  • RELEVANCY SCORE 2.84

    DB:2.84:Message V1604 9z


    Hi all,I am working in Assembly order scenario in VC.When the production order created against the sales order is released and I try to change the sales order I get a warning messageV1604 - A production order is available for item 000010 I want to change this message to Error message from warning message as I dont want any sales order changes after production order is released.I tried to search in all system message but could not get any Application areaV1 and message number 604.If anybody can throw some light on this I would be thankful.Cheers

    DB:2.84:Message V1604 9z

    Hi Kalidas,This can be implemented in the user exit PPCO0003 .This exit would be triggered during sales order processing, if the changes made in the sales order can create a change in Production order or Process order.You may code your business logic checks in this enhancement.Hope this solves your problemRegards,Jayakandan

  • RELEVANCY SCORE 2.83

    DB:2.83:Manual Production Order Creation x3



    When i create production order Creationusing CO01, I receive message "Standard production only allowed with ref. to indivual customer stock"

    DB:2.83:Manual Production Order Creation x3


    Please check if the material is Individual catagory in MRP4 view.

    Narendra Lohokare.

  • RELEVANCY SCORE 2.83

    DB:2.83:Restrict Released Production Order To Planned Status. 8c



    HI all,

    In our company i restricted that Production order should be released by particular user.

    After he released, any changes in that particular released production order has to be done by released user only and not by others.

    so i given transaction notification to release any Production order by only one user..and update released Production order by one user..

    Now other users are updating released status to planned status and they are changing the released production order..

    how to restrict released Production order to planned status....

    please help me

    DB:2.83:Restrict Released Production Order To Planned Status. 8c


    Hi Mohan,

    Try to put a condition to compare UserSign UserSign2 in Your SP.

    Try to Write SP based on this condition : When Usersign is not equal to current user logged in SAP Business One OWOR Table then it should give an error. (You have to compare to UserSign and UserSign2 in OWOR)

  • RELEVANCY SCORE 2.83

    DB:2.83:Release Combined Order Is Rejected But Individual Orders Are Released 39



    Hi PP expert,

    Have you ever worked with combined orders?

    Concept: sales order is created with a lot of items (make-to-order)  individual orders are directly created  a background job based on transaction MILL_OC will run and combine the production orders which use the same component. In this way, all the component reservations will occur on the combined order, but the 101 movement still takes place on the individual orders.

    Problem: we want to release the combined order with missing parts

    - Green flag in CO02 for the combined order

    - SAP will first release all the individual orders (remember that there are no material reservations on individual orders)

    - Then SAP will try to release the combined order

    - Release will be rejected because there is not enough stock available (which is what we want)

    - But THE INDIVIDUAL ORDERS REMAIN RELEASED !

    Before working with SAP MII, this was not really an issue (nobody noticed this because shop floor papers of individual orders are not printed and production planners only look at the combined orders in their planning board).

    Now with MII, when an order is released, an Idoc is sent from SAP to MII and the operator of the machine will try to produce.

    Do you have an idea how to block the release of the individual orders if the release of the combined order is rejected?

    Kind regards,

    Walter

    DB:2.83:Release Combined Order Is Rejected But Individual Orders Are Released 39


    Hi PP expert,

    Have you ever worked with combined orders?

    Concept: sales order is created with a lot of items (make-to-order)  individual orders are directly created  a background job based on transaction MILL_OC will run and combine the production orders which use the same component. In this way, all the component reservations will occur on the combined order, but the 101 movement still takes place on the individual orders.

    Problem: we want to release the combined order with missing parts

    - Green flag in CO02 for the combined order

    - SAP will first release all the individual orders (remember that there are no material reservations on individual orders)

    - Then SAP will try to release the combined order

    - Release will be rejected because there is not enough stock available (which is what we want)

    - But THE INDIVIDUAL ORDERS REMAIN RELEASED !

    Before working with SAP MII, this was not really an issue (nobody noticed this because shop floor papers of individual orders are not printed and production planners only look at the combined orders in their planning board).

    Now with MII, when an order is released, an Idoc is sent from SAP to MII and the operator of the machine will try to produce.

    Do you have an idea how to block the release of the individual orders if the release of the combined order is rejected?

    Kind regards,

    Walter

  • RELEVANCY SCORE 2.83

    DB:2.83:Automatic Creation Of Production Order When Credit Limit Lock Got Released 8d



    It seems that production order will be created only when the sales order is created without credit lock error from the first.

    Once credit lock happened, even if user release the lock, production order will not be created automatically anymore.

    Is there a way to change the setting so that production order will be created automatically after credit unlock?

    don't want to create production order manually every time when credit lock happens

    DB:2.83:Automatic Creation Of Production Order When Credit Limit Lock Got Released 8d


    Hi ,

    still not able to proceed further....

    Could you explain a bit in detail??

    Thanks

    Manish Gupta

  • RELEVANCY SCORE 2.82

    DB:2.82:Error Message Printing A Production Order z7



    Hi all,

    We are using MTO and have configured the scheduling profile so that the order is printed as soon as it is released. However I've noticed that the order is not being printed and once it is released we ahe the following message:

    "CO: Program PPCOXPR1 Create missing parts index from table RESB Program run not necessary Program already run ".

    The same message appears when I try to print the order with CO02 or with CO04.

    Please help!

    Thanks

  • RELEVANCY SCORE 2.82

    DB:2.82:Changing A Resource On A Released Production Order aj



    When Production Models are created, a Resource is assigned. As far as I know, the only way to change that Resource is in the Production Model. Is there a way to change it once a Production Order is created? We would like to be able to re-assign the Resource by Order as a means of tracking it.

    DB:2.82:Changing A Resource On A Released Production Order aj


    When Production Models are created, a Resource is assigned. As far as I know, the only way to change that Resource is in the Production Model. Is there a way to change it once a Production Order is created? We would like to be able to re-assign the Resource by Order as a means of tracking it.

  • RELEVANCY SCORE 2.82

    DB:2.82:Cancelling A Production Order 8a



    I have created a Production order from a Production BOM. I have changed the status of the Production order to Released. I now want to cancel that Production order and return all components to inventory. When I try to cancel I get the error message.

    "Action is valid for planned or released production orders with no transactions "

    What transactions would this be referring to ?

    DB:2.82:Cancelling A Production Order 8a


    Once you received the Production Order, you will have only one option to reverse it: Create a same Production Order as Disassemble type. Then do Issue for Production.

  • RELEVANCY SCORE 2.81

    DB:2.81:Set Deletion Flag To Production Order fm



    We had a problem on month end processing performance. We found the solution of setting deletion flag to production orders might be helpful. However, the action failed with the error message 'Purchase order xxxxxx still exists' . There were some subcontracting PO related to the production orders but they were finished already.

    Would someone help to guide how to set deletion flag under this situation? Thanks in advance.

    DB:2.81:Set Deletion Flag To Production Order fm


    First try to complete the Purchase orders and then try to close the Production orders this might work.

    If you face the problem of unable to close the Purchase order, previously we faced the same problem when we referred this to SAP thru OSS message SAP came back with a Conversion program, unfortunately I do not exactly remember the program name.

    I suggest you to refer this to SAP, as this would help you.

    Regards,

    Sriramachandra

  • RELEVANCY SCORE 2.81

    DB:2.81:Conversion Planned Order To Production Order Without Bom - No Message zp



    Hello

    Problem: during conversion planned order to production order system does not inform (warning or error) that BOM is not exist. Is it possible to force system to any reaction by standard configuration ?

    Everything is ok if production order is created by CO01, but during conversion there is no any reaction - production order is created, released etc. I only see by system status that something is wrong (NMAT - No material components). Probably we will have to do it by User Exit but I want to know that all standard configs are exhausted.

    Thx in advance. Reg.

    Joanna

    DB:2.81:Conversion Planned Order To Production Order Without Bom - No Message zp


    Hi

    Thanks for your help - it helpd to solve my problem.

    Reg. Joanna

  • RELEVANCY SCORE 2.80

    DB:2.80:How To Close Production Order x1



    Hi All,

    The production order planned and Released date is 17/12/2008, and the Issue for production order document date is 17/12/2009 (it was entered by mistake in the system with 12 months difference). When you try to close the Production Order the system shows an error. How we can deal with this sistuation?

    Thanks

    SV Reddy

    DB:2.80:How To Close Production Order x1


    hi reddy,

    what is error message ?

    Jeyakanthan

  • RELEVANCY SCORE 2.80

    DB:2.80:Dynamic Assembly Production Order 7m



    Dear all,

    For a new Roll out in one of our plants, the current set up of static

    MTO assembly (assembly type 2) does not completely fulfill the needs.

    The main problem is that sales orders still can be updated/changed

    irrespective whether the linked production order has been

    created/released or even partly confirmed.

    Therefore we have set up a copy but with assembly type 3 (=production

    order, dynamic processing), linked now to production order type PP04.

    We expected that the system would create directly a production order

    upon sales order entry, however, it does not, it just creates a planned

    order (idem as with assembly type 4=planned order dynamic processing).

    Changes to sales orders are still possible as long as the planned order

    remains as such. Once converted to a production order (even when NOT

    released yet) no changes can be performed in the sales order with

    automatic adaption of the linked production order.

    Our aim is that a new entered sales order would create a unreleased

    production order which still can be automatically updated via sales

    order until somebody will release the production order (=trigger that

    the order has been distributed to the shop floor).As from the time the

    production order has been released, changes to sales orders should get

    the warning message and updating of production orders should be done

    manually. This warning message does now already pop up with production order

    status "created".

    We have been checking OSS and SAP help, but we did not find much info on

    assembly type 3 (dynamic production order). Can somebody inform us on the important things to consider, what to set up in order to get production orders created automatically ?

    DB:2.80:Dynamic Assembly Production Order 7m


    Hi Philippe,

    You can try with user exit , when production order is relase , it will not allow you to change any data in Production order

    for sales order also we can use user exit

    If you got reply reward me and close the issue

    Thanks

    Bala

  • RELEVANCY SCORE 2.80

    DB:2.80:Serial Numbers In Discrete Industry fd



    Hi,

    I want to use serial numbers for make-to-stock production. When i tried to release production order for material, i couldn't see goods movements for serialized materials.

    Information message is "Serial number obligatory material SERI_NOLU_MAMUL (material name) cannot be updated"

    When i released production order, I want to see goods movements for serialized material too. I don't want to use the transaction MB1A or MB11. Is it possible ?

    Thanks.

    Best Regards,

    Behcet Ahmet Aksoz

    DB:2.80:Serial Numbers In Discrete Industry fd


    Dear

    Unfortunately, it is not possible to post an automatic GR or goods issues for serialized materials within an order confirmation. Please see SAP note 39230 for more details.The goods movement must then be executed manually in inventory management (MB1A, MB31, MIGO).

    Regards

    JH

  • RELEVANCY SCORE 2.80

    DB:2.80:Read Pp Master Data Not Setting Prod Order From Rel Back To Crtd k8



    I created a production order, released it, and then made changes to the BOM. I went back into the production order and did Functions Read PP master data. The system gives the message "error when checking BOM - reading routing without BOM not possible after release".

    I have deleted all relevant (1) inspection lots (2) transfer reqs. No transfer orders exist and no material movements appear to have been executed.

    What am I missing? Why won't the system read the BOM?

    Thanks much!

    Sarah

  • RELEVANCY SCORE 2.80

    DB:2.80:Production Order Type. m9



    Hi,

    Can I change a production order type? I want to change two orders which are make to stock production into make-to-order. Both the orders have been released.

    DB:2.80:Production Order Type. m9


    Hi

    you can't change order type after releasing

    now u can 't change

    Sunil

  • RELEVANCY SCORE 2.80

    DB:2.80:How To Mass Set Deletion Flag For The Production Order j7



    Hi Expert,

    do you know which transcation code or program is used to mass set the deletion flag for production order?

    thank you in advance!

    DB:2.80:How To Mass Set Deletion Flag For The Production Order j7


    Xioliu,

    Your thanks is accepted in the form of points. Please reward your points for answers which helped you.

    Regards,

    Prasobh

  • RELEVANCY SCORE 2.80

    DB:2.80:Couldn't Modify Production Orders dp



    Hello Friends,

    I met a problem that when I modify production order by DI ,there is an error:Action is valid for planned or released production orders with no transactions .But if i modfiy the production order in business one screen it can be modified.

    Some of the items in the production order are manual and some are backflush, and part of the production order have been receipted from production.

    My business one'version:2005B PL38.

    Edited by: Triston Lee on Jul 6, 2008 12:46 PM

    DB:2.80:Couldn't Modify Production Orders dp


    I have sbo 2007 and there it is working. If you add new line as

    productionorder.lines.add

    and add new item and then call

    productionorder.update

    it works in 2007. Which code do you have for this?

  • RELEVANCY SCORE 2.80

    DB:2.80:Issue Component Cannot Be Found mc



    What would be the possible reason why when I created a released Production Order, when I go to right click issue component, I can not find issue component option?

    DB:2.80:Issue Component Cannot Be Found mc


    can anyone help me on this plz Emails are not reaching to outlook inbox

  • RELEVANCY SCORE 2.80

    DB:2.80:Production Order Released Blocking The Batch Created j7



    Hello Guru,

    I have some question to ask, in production order, when we change the order via CO02, released it (production order create:classification) for batch will appear. after completing this the order "released carried out" will be the message. and when we save the order CHANGE BATCH view will display then, the production date and shelf life expiration date was automatically populated by SAP. my question is is there a possiblity that this CHANGE BATCH when will appear the production date and shelf life expiration date was unchangeble already SAP proposed date was fixed (gray-out) or instead change batch display batch will appear? is there any set-up to make this feasible?

    we want to block the production date/shelf life expiration date in modification once SAP has already computed and proposed this date for the batch on the FG material of the production order. Please help. I know this is a standard behavior, but can this be feasible?

    Any help or inputs.

    Thanks

    Edited by: Agent X44 on Mar 11, 2009 11:50 AM

    Edited by: Agent X44 on Mar 11, 2009 12:10 PM

    Edited by: Agent X44 on Mar 11, 2009 1:15 PM

    DB:2.80:Production Order Released Blocking The Batch Created j7


    You must have to check batch Class and its characteristics. Something wrong here.

    Regards,

    RM

  • RELEVANCY SCORE 2.79

    DB:2.79:Bapi To Create An Operation In A Production Order. 31



    Hi,

    can any one help me in finding a BAPI that creates an operation in a production order, my functionality is to add a last operation to the production that indicated where the part has to be moved to.

    This function should be triggered when the production order is released (i found the BADI to do this, only thing left is the BAPI that creates an operation.)

    Thanks

    Rich

    DB:2.79:Bapi To Create An Operation In A Production Order. 31


    Check with the below Bapi's.

    BAPI_PRODORD_CREATE

    BAPI_PRODORD_CREATE_CAP_REQ

    Thanks,

    Srinivas

  • RELEVANCY SCORE 2.79

    DB:2.79:Cannot Set Deletion Flag For Product Cost Collector 704682 3k


    Hi, We have one Finish Goods material setting Discrete Manufacturing. We done GR normal. Later for the user mistake checked the Repetitive Manufacturing flag and profile in material master MRP view. And cheked Repetitive flag at production version via C223(product version). Now the material can't generate the production order. We want to remove the Repetitive Manufacturing flag at Material master and product version. The system need delete cost collector first. When we delete the cost collector. We got the following error message. We closed all relatived procution order via technically complete at CO03. The delete cost collector can't pass. Pls help us check it.Thanks.=================================================Cannot set deletion flag for product cost collector 704682Message no. KOSA 118DiagnosisThe deletion flag cannot be set for product cost collector 704682 for one or more of the following reasons:There are still run schedule headers for the product cost collector in which the status Deletion indicator is not set.There are production versions for the product cost collector in which the status Deletion indicator is not set. There are postprocessing records in repetitive manufacturing that are to be assigned to the product cost collector. There are manufacturing orders for the product cost collector in which the status Deletion indicator is not set. System ResponseThe system does not set a deletion flag.ProcedureCheck the status of the orders assigned to the product cost collector. To display the orders and production versions assigned to the product cost collector, select Goto - Display orders.=================================================Best RegardsPark Han

    DB:2.79:Cannot Set Deletion Flag For Product Cost Collector 704682 3k

    Hi Mangalraj.S, The error message is sample. Pls advise.Thanks.Best RegardsPark Han

  • RELEVANCY SCORE 2.79

    DB:2.79:Block Changes To Production Orders. xm



    Hi!, Is there a way to block users from changing the Bill of Materials of a released production order?. Even more, block them of changing it when components have been issued or product has been released?

    Could this be donde through SP_Transaction_Notification?

    Thank you,

    Jose.

    DB:2.79:Block Changes To Production Orders. xm


    Hi Jose.......

    If you want to block the users from updating the production order then SP is the best option to do. But if you want to maintain the log history also then better to go for SDK. It will definitely solve your purpose.

    Regards,

    Rahul

  • RELEVANCY SCORE 2.79

    DB:2.79:Production Order Cancellation 93



    Hello,

    I want to put deletion flag in production order, when i try to do this, its showing as purchase order exist, when i try to delete purchase order, its showing PR exist, when i try to delete PR , its showing production order exist. so its going in a cyclic way. can any one please help to solve this issue.

    DB:2.79:Production Order Cancellation 93


    Try the following.

    1. TECO the production order. When you TECO order, the PR will be marked with deletion at item level.

    2. Change PO and try marking for deletion again.

    3. Then set deletion flag for production order.

    It works in my system. However, there is no transaction in PO yet in my testing. Please check and revert.

    Rgrds,

  • RELEVANCY SCORE 2.79

    DB:2.79:How To Create New Message Control For Bom 7m



    Dear Experts,

    My question is , we have Set Deletion flag for BOM of some material, When we go to make Production Order. it is showing an warning message , I want to set Error message,instead of warning message . can you all plz tell me how to do it in conflig.

    I have tried following settings , but it allows me to change it, but not to create a new message no

    IMG, Production, Basic data, Bill of material, General Data, Change Message type

    Thank you for your time.

    DB:2.79:How To Create New Message Control For Bom 7m


    Hi,

    For OPJB, execute.

    Click on 'New entries'.

    Enter version as 000, application area (the first two digits of the message no, for BOM it would be CO I guess), message no.

    Press enter. Under category maintain as E i.e. error.

    For SE91, execute.

    In message class enter the first two digits of the message, under subobjetcs, enter the message number clcik on 'where used list icon' in extreme left.

    A dialogue box will apeear, select programme classes. Click on right mark i.e. execute.

    A list of programmes will displayed.

    Select the relevant programme clcik on change.

    Change the warning into error there. Please note that you need access key need ABAP consultant to do the same.

    Hope this helps you.

    SmanS

  • RELEVANCY SCORE 2.78

    DB:2.78:Restrict Processing Of Production Order km



    Hi All,

    I would like to know if i can restrict the processing of my production. ( i.e The production order should not be released befor the costing run). Only when the costing run is taken i should be able to release or process my production order further.

    Regards,

    Nishant Kansara

    DB:2.78:Restrict Processing Of Production Order km


    Hi Nishant

    Costing run ie cost estimates through CK 11 n / or CK 40.

    Production order will be created or Released without costing data updated in material master. This can be achieved by User Enhancement. This will be very simple consult your ABAP's

    Regards

    J . Saravan

  • RELEVANCY SCORE 2.78

    DB:2.78:I Am Unable To Revoke The Deletion Flag On A Production Order. c8



    I am using transaction CO02 to change production orders. Once the deletion flag is set on the production order, the order no longer allows further changes. The steps to set the deletion flag are Functions, Deletion Flag, and then Activate. The steps to remove the deletion flag are Functions, Deletion Flag, and then Revoke.

    When I go to CO02, I type in the order number and press enter, then I get an Information Box that pops up and says that "Change" is not allowed to my order number.

    Additional text from above error message:

    "Change" is not allowed (ORD 7025926)

    Message no. BS007

    Diagnosis

    The current status of object 'ORD 7025926' prohibits business transaction 'Change'.

    Procedure

    To process business transaction 'Change', you first have to change the status of object 'ORD 7025926' to allow the transaction 'Change'.

    I do not know how to fix this so that I may revoke the deletion flag. Can anyone help?

    Thank You

    DB:2.78:I Am Unable To Revoke The Deletion Flag On A Production Order. c8


    Prasobh,

    I do not have "DLT", only REL, DLV, DLFL, GMPS, MANC, NTUP, OPGN, and SETC.

    Regards,

    Johnny

  • RELEVANCY SCORE 2.78

    DB:2.78:Production Order Not Released 1k



    Dear friends,

    I have configure new Order type through OPJH , OPL8, OPK4 AND OPU3, but system generate production order against new order type, but do not release production order system gives message "Release rejected (check log)" .

    Please provide solution , if any other t-code whare we define configuration. Please write.

    Thanks and Regards

    Ajit Sharma

    DB:2.78:Production Order Not Released 1k


    Dear

    Have you maintained OPKP - prod.scheduling profile.

    Check for OPJK - order control 1 (during order creation ) and 2 (during order release)

    If it is yes, then check all components available for production.

  • RELEVANCY SCORE 2.78

    DB:2.78:Cohv - Log Message Not Showing jd



    HI Expert ,

    When we perform COHV (Close Order ) , Log msg not showing if the production order more than 20 :

    Log Message Showing if the Production order less than 20 :

  • RELEVANCY SCORE 2.77

    DB:2.77:Co Production Order k1



    Iam creating a CO production order using kkf1 and iam getting the following message

    " settlement rule cannot be created ".

    The cost estimate has been created in KKpan and released using ck 24 .

    Please help ..

    Nikhil

    DB:2.77:Co Production Order k1


    Check whether you have settlement profile mentioned in the order type (T Code KOT2) .

    Check this settlement profile for completness, ensure that Material is a valid Receiver.

    Check the node 'Define Cost-Accounting-Relevant Default Values for Order Types and Plants' ( under Controlling-Product Cost Controlling-Cost Object Controlling-Product Cost by Order-Manufacturing Order) whether the default rule exist for the CO production order type and the plant.

    Regards

    Sreenivas

  • RELEVANCY SCORE 2.77

    DB:2.77:Production Order Query mm



    Dear All,

    we are developing BI report to fetch all the data from the production order from Table AFPO.

    when I am putting DELETION FLAG for an order AND WHEN i GO TO SE16 AFPO TABLE and put that particular order.

    It is not showing X mark for the DELETION INDICATOR. It should show mark X for that particular order then only our BI guy will able to fetch all the data from production order except DELETION FLAG INDICATOR MARKED ORDERS.

    Kindly suggest

    Max

    DB:2.77:Production Order Query mm


    Dear Muhammad,

    Thank you for the valuable inputs.

    Regards,

    Max

  • RELEVANCY SCORE 2.77

    DB:2.77:Receipt From Production 7p



    Hi, everybody

    i have already created a production order, but when i Receipt from production, an error appear" Referenced production oder status should be "released"".

    i dont undersatnd it.

    DB:2.77:Receipt From Production 7p


    Mr Tian Le,

    Go To that particular production order and change the status of the production order to Released only then the sytem allows you to create the production.

    Please reward points.

    Nagesh.

  • RELEVANCY SCORE 2.77

    DB:2.77:Availability Check. xa



    Hello.

    when we r doing availability check.is there any way to make reservations when the the order is released.

    whats happening now is that.

    I created production order A and it crated a material reservation for the material C.

    after that i create production order B and it also crated a material reservation for the material C.

    the quantity of material B is only available for either production order A or Production order B.

    both production order A and B are in creation state.

    I can not release production order B because production order A is created before production production order A.

    is there any way to over come this scenarion.

    What I want to do is material should be reserved only when the production order is released.

    Edited by: deepu p on May 15, 2009 12:02 AM

    DB:2.77:Availability Check. xa


    hai,

    you can do this way also, set the teco status to one order , so all the reser vations will be canceled to with respect to that order , then release the required order and process it,

    As and when you need to process the first order , Revoke the Teco.

  • RELEVANCY SCORE 2.77

    DB:2.77:Release Of Process Order With Two Production Versions Unlocked xx



    Hi Experts,

    At present we can release the process order only if one product version is unlocked. If two production versions are unlocked then system doesn't allow to release process order with the message "Master recipe not released" "Message no. 40102"

    Due to business requirement, we need to keep two production versions unlock, so kindly suggest customizing changes required to make it possible

    Regards,

    Chetan

    DB:2.77:Release Of Process Order With Two Production Versions Unlocked xx


    Hi Pradeep,

    I checked with settings suggested by you, but it is not working, so can you suggest any workarround.

    Regards,

    Chetan

  • RELEVANCY SCORE 2.76

    DB:2.76:Release Of Combined Order Is Rejected But Individual Orders Are Released 93



    Hi PP expert,

    Have you ever worked with combined orders?

    Concept: sales order is created with a lot of items (make-to-order)  individual orders are directly created  a background job based on transaction MILL_OC will run and combine the production orders which use the same component. In this way, all the component reservations will occur on the combined order, but the 101 movement still takes place on the individual orders.

    Problem: we want to release the combined order with missing parts

    -Green flag in CO02 for the combined order

    -SAP will first release all the individual orders (remember that there are no material reservations on individual orders)

    -Then SAP will try to release the combined order

    -Release will be rejected because there is not enough stock available (which is what we want)

    -But THE INDIVIDUAL ORDERS REMAIN RELEASED !

    Before working with SAP MII, this was not really an issue (nobody noticed this because shop floor papers of individual orders are not printed and production planners only look at the combined orders in their planning board).

    Now with MII, when an order is released, an Idoc is sent from SAP to MII and the operator of the machine will try to produce.

    Do you have an idea how to block the release of the individual orders if the release of the combined order is rejected?

    Kind regards,

    Walter

  • RELEVANCY SCORE 2.76

    DB:2.76:Unable To Delete Assembly Production Orders 3j



    Hi Gurus,

    I have a ATO sales order. The production order is released and partially confirmed.

    Now the customer asked to cancel the order. Sales dept unable to reject the line as the production order is already in-process. They requested to delete the production order.

    Even though I 'TECO' the prod order, I'm unable to set 'deletion flag'. what should I do to successfully reject the sales order?

    DB:2.76:Unable To Delete Assembly Production Orders 3j


    There is no 'one easy solution' to my question. After long hard struggle, and with your guidance I wrote a business process flow on how to successfully CLOSE a partially completed production order.

    I had to address all the different scenarios (with WM stock, QM inspections, scrap it or put it to shelf, TR/TOs already printed, COGI errors, WIP, Costing balances) and what business has to do (if the shop paper is already printed, go fetch it on the shop floor and trash it) .

    This is a long hard procedure for the business to follow. Just to 'reject one sales line' the business has to go through 5 different departments which is 'Very tedious'. But there is no other way around in SAP.

    Thanks a lot for all your help.

  • RELEVANCY SCORE 2.76

    DB:2.76:Reset The Completed Status On Sales Order - Production Order jd



    Hello experts,

    I hope that anybody could help me with this issue.

    When I try to reset the Completed system status on a sales order item I receive the following info-message:

    V2355 - Deletion flag for production order/network 1 cannot be reset.

    It should not be a problem as it is only an info-message. You can perform the reset unless the production order is not deleted.

    If the production order is deleted, you can not reset the status.

    In my opinion it is a SAP-bug.

    Does anybody of you know any SAP-not for fixing this problem, please?

    Thanks a lot

    Peter

    Edited by: Peter Jankech on Jul 1, 2008 8:43 AM

    DB:2.76:Reset The Completed Status On Sales Order - Production Order jd


    Hello Ravi,

    the problem is, that the production order has been deleted already.

    Regarding the Info-message V2355 - Deletion flag for production order/network 1 cannot be reset:

    - if the particular producion order is still available within the system (it has not been deleted) - it is possible to reset the Completed status on the sales order after confirmation this message.

    - if the particular producion order has been deleted already, it is not possible to reset the Completed status anymore within the transaction VA02.

    It is probably a program error, what do you think?

    Thanks a lot

  • RELEVANCY SCORE 2.76

    DB:2.76:Production Order Closing Error 8c


    Dear guru'sPls help me, when user closing production order this 2 error message giving " Balance of ORD 1040006 is not Zero""unprocessed future change recs for order 1040006 prevent deletion flag/co..." Production order status is like this - " REL CNF DLV PRC BCRQ GMPS MACM SETC"Pls guide me where i have to check, what is the reason for this.

    DB:2.76:Production Order Closing Error 8c

    settle the order first after calculating the variances.variances will be calculated when the order status is : DLV or TECO.regs,ramesh b

  • RELEVANCY SCORE 2.76

    DB:2.76:Exit At The Production Order Release kz



    Hi every one,

    Can you please help me in finding the user exit for either CO01 or CO02 when a Production Order is released.

    I.e, when a production order is changed or created and once it is released, i want the exit at that point. i want to trigger some code once the order is released.

    Thanks

    Rich

    DB:2.76:Exit At The Production Order Release kz


    Hi,

    ppco0007- Exit when saving production order

    ppco0012 - Prod order display/change order header data

    ppco0005 - Storage location/backflushing when order is created

    In transaction smod, in enhancement field type a name then press f4. In the pop up screen enter the package as co,keep the exit name field as "blank" press enter.All the relevant exits will be displayed.

    Regards,

    Senthilkumar